diff options
Diffstat (limited to 'drivers/net/usb/lan78xx.c')
-rw-r--r-- | drivers/net/usb/lan78xx.c | 98 |
1 files changed, 71 insertions, 27 deletions
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 027ee37..650e716 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -462,32 +462,53 @@ static int lan78xx_read_raw_eeprom(struct lan78xx_net *dev, u32 offset, u32 length, u8 *data) { u32 val; + u32 saved; int i, ret; + int retval; - ret = lan78xx_eeprom_confirm_not_busy(dev); - if (ret) - return ret; + /* depends on chip, some EEPROM pins are muxed with LED function. + * disable & restore LED function to access EEPROM. + */ + ret = lan78xx_read_reg(dev, HW_CFG, &val); + saved = val; + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) { + val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_); + ret = lan78xx_write_reg(dev, HW_CFG, val); + } + + retval = lan78xx_eeprom_confirm_not_busy(dev); + if (retval) + return retval; for (i = 0; i < length; i++) { val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_READ_; val |= (offset & E2P_CMD_EPC_ADDR_MASK_); ret = lan78xx_write_reg(dev, E2P_CMD, val); - if (unlikely(ret < 0)) - return -EIO; + if (unlikely(ret < 0)) { + retval = -EIO; + goto exit; + } - ret = lan78xx_wait_eeprom(dev); - if (ret < 0) - return ret; + retval = lan78xx_wait_eeprom(dev); + if (retval < 0) + goto exit; ret = lan78xx_read_reg(dev, E2P_DATA, &val); - if (unlikely(ret < 0)) - return -EIO; + if (unlikely(ret < 0)) { + retval = -EIO; + goto exit; + } data[i] = val & 0xFF; offset++; } - return 0; + retval = 0; +exit: + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) + ret = lan78xx_write_reg(dev, HW_CFG, saved); + + return retval; } static int lan78xx_read_eeprom(struct lan78xx_net *dev, u32 offset, @@ -509,44 +530,67 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset, u32 length, u8 *data) { u32 val; + u32 saved; int i, ret; + int retval; - ret = lan78xx_eeprom_confirm_not_busy(dev); - if (ret) - return ret; + /* depends on chip, some EEPROM pins are muxed with LED function. + * disable & restore LED function to access EEPROM. + */ + ret = lan78xx_read_reg(dev, HW_CFG, &val); + saved = val; + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) { + val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_); + ret = lan78xx_write_reg(dev, HW_CFG, val); + } + + retval = lan78xx_eeprom_confirm_not_busy(dev); + if (retval) + goto exit; /* Issue write/erase enable command */ val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWEN_; ret = lan78xx_write_reg(dev, E2P_CMD, val); - if (unlikely(ret < 0)) - return -EIO; + if (unlikely(ret < 0)) { + retval = -EIO; + goto exit; + } - ret = lan78xx_wait_eeprom(dev); - if (ret < 0) - return ret; + retval = lan78xx_wait_eeprom(dev); + if (retval < 0) + goto exit; for (i = 0; i < length; i++) { /* Fill data register */ val = data[i]; ret = lan78xx_write_reg(dev, E2P_DATA, val); - if (ret < 0) - return ret; + if (ret < 0) { + retval = -EIO; + goto exit; + } /* Send "write" command */ val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_WRITE_; val |= (offset & E2P_CMD_EPC_ADDR_MASK_); ret = lan78xx_write_reg(dev, E2P_CMD, val); - if (ret < 0) - return ret; + if (ret < 0) { + retval = -EIO; + goto exit; + } - ret = lan78xx_wait_eeprom(dev); - if (ret < 0) - return ret; + retval = lan78xx_wait_eeprom(dev); + if (retval < 0) + goto exit; offset++; } - return 0; + retval = 0; +exit: + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) + ret = lan78xx_write_reg(dev, HW_CFG, saved); + + return retval; } static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset, |