diff options
Diffstat (limited to 'drivers/net/usb')
| -rw-r--r-- | drivers/net/usb/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/usb/asix_devices.c | 1 | ||||
| -rw-r--r-- | drivers/net/usb/cdc_ncm.c | 28 | ||||
| -rw-r--r-- | drivers/net/usb/huawei_cdc_ncm.c | 6 | ||||
| -rw-r--r-- | drivers/net/usb/plusb.c | 15 | ||||
| -rw-r--r-- | drivers/net/usb/qmi_wwan.c | 1 |
6 files changed, 50 insertions, 3 deletions
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index cdde590..3a72862 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -364,7 +364,7 @@ config USB_NET_NET1080 optionally with LEDs that indicate traffic config USB_NET_PLUSB - tristate "Prolific PL-2301/2302/25A1 based cables" + tristate "Prolific PL-2301/2302/25A1/27A1 based cables" # if the handshake/init/reset problems, from original 'plusb', # are ever resolved ... then remove "experimental" depends on USB_USBNET diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index dc7b639..50737de 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -1369,6 +1369,7 @@ static struct usb_driver asix_driver = { .probe = usbnet_probe, .suspend = asix_suspend, .resume = asix_resume, + .reset_resume = asix_resume, .disconnect = usbnet_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index afbfc0f..dc6d3b0 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -769,8 +769,10 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_ u8 *buf; int len; int temp; + int err; u8 iface_no; struct usb_cdc_parsed_header hdr; + u16 curr_ntb_format; ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); if (!ctx) @@ -875,6 +877,32 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_ goto error2; } + /* + * Some Huawei devices have been observed to come out of reset in NDP32 mode. + * Let's check if this is the case, and set the device to NDP16 mode again if + * needed. + */ + if (ctx->drvflags & CDC_NCM_FLAG_RESET_NTB16) { + err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_FORMAT, + USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, + 0, iface_no, &curr_ntb_format, 2); + if (err < 0) { + goto error2; + } + + if (curr_ntb_format == USB_CDC_NCM_NTB32_FORMAT) { + dev_info(&intf->dev, "resetting NTB format to 16-bit"); + err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_FORMAT, + USB_TYPE_CLASS | USB_DIR_OUT + | USB_RECIP_INTERFACE, + USB_CDC_NCM_NTB16_FORMAT, + iface_no, NULL, 0); + + if (err < 0) + goto error2; + } + } + cdc_ncm_find_endpoints(dev, ctx->data); cdc_ncm_find_endpoints(dev, ctx->control); if (!dev->in || !dev->out || !dev->status) { diff --git a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c index 2680a65..63f28908 100644 --- a/drivers/net/usb/huawei_cdc_ncm.c +++ b/drivers/net/usb/huawei_cdc_ncm.c @@ -80,6 +80,12 @@ static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev, * be at the end of the frame. */ drvflags |= CDC_NCM_FLAG_NDP_TO_END; + + /* Additionally, it has been reported that some Huawei E3372H devices, with + * firmware version 21.318.01.00.541, come out of reset in NTB32 format mode, hence + * needing to be set to the NTB16 one again. + */ + drvflags |= CDC_NCM_FLAG_RESET_NTB16; ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags); if (ret) goto err; diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c index 22e1a9a..6fe5937 100644 --- a/drivers/net/usb/plusb.c +++ b/drivers/net/usb/plusb.c @@ -102,7 +102,7 @@ static int pl_reset(struct usbnet *dev) } static const struct driver_info prolific_info = { - .description = "Prolific PL-2301/PL-2302/PL-25A1", + .description = "Prolific PL-2301/PL-2302/PL-25A1/PL-27A1", .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT, /* some PL-2302 versions seem to fail usb_set_interface() */ .reset = pl_reset, @@ -139,6 +139,17 @@ static const struct usb_device_id products [] = { * Host-to-Host Cable */ .driver_info = (unsigned long) &prolific_info, + +}, + +/* super speed cables */ +{ + USB_DEVICE(0x067b, 0x27a1), /* PL-27A1, no eeprom + * also: goobay Active USB 3.0 + * Data Link, + * Unitek Y-3501 + */ + .driver_info = (unsigned long) &prolific_info, }, { }, // END @@ -158,5 +169,5 @@ static struct usb_driver plusb_driver = { module_usb_driver(plusb_driver); MODULE_AUTHOR("David Brownell"); -MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1 USB Host to Host Link Driver"); +MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1/27A1 USB Host to Host Link Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2f260c6..49a27dc 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -876,6 +876,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */ + {QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ |