summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/core.c')
-rw-r--r--drivers/net/wireless/ath/ath10k/core.c156
1 files changed, 133 insertions, 23 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index c84c2d3..b2c7fe3 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -60,6 +60,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 2116,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
@@ -78,6 +79,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -97,6 +99,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -116,6 +119,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.fw = QCA6174_HW_3_0_FW_FILE,
@@ -135,6 +139,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+ .cal_data_len = 8124,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
@@ -156,11 +161,10 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 150000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
- .num_msdu_desc = 1424,
- .qcache_active_peers = 50,
.tx_chain_mask = 0xf,
.rx_chain_mask = 0xf,
.max_spatial_stream = 4,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -179,6 +183,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
@@ -197,6 +202,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
@@ -217,11 +223,10 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.channel_counters_freq_hz = 125000,
.max_probe_resp_desc_thres = 24,
.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
- .num_msdu_desc = 2500,
- .qcache_active_peers = 35,
.tx_chain_mask = 0x3,
.rx_chain_mask = 0x3,
.max_spatial_stream = 2,
+ .cal_data_len = 12064,
.fw = {
.dir = QCA4019_HW_1_0_FW_DIR,
.fw = QCA4019_HW_1_0_FW_FILE,
@@ -466,18 +471,18 @@ exit:
return ret;
}
-static int ath10k_download_cal_file(struct ath10k *ar)
+static int ath10k_download_cal_file(struct ath10k *ar,
+ const struct firmware *file)
{
int ret;
- if (!ar->cal_file)
+ if (!file)
return -ENOENT;
- if (IS_ERR(ar->cal_file))
- return PTR_ERR(ar->cal_file);
+ if (IS_ERR(file))
+ return PTR_ERR(file);
- ret = ath10k_download_board_data(ar, ar->cal_file->data,
- ar->cal_file->size);
+ ret = ath10k_download_board_data(ar, file->data, file->size);
if (ret) {
ath10k_err(ar, "failed to download cal_file data: %d\n", ret);
return ret;
@@ -488,7 +493,7 @@ static int ath10k_download_cal_file(struct ath10k *ar)
return 0;
}
-static int ath10k_download_cal_dt(struct ath10k *ar)
+static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name)
{
struct device_node *node;
int data_len;
@@ -502,13 +507,12 @@ static int ath10k_download_cal_dt(struct ath10k *ar)
*/
return -ENOENT;
- if (!of_get_property(node, "qcom,ath10k-calibration-data",
- &data_len)) {
+ if (!of_get_property(node, dt_name, &data_len)) {
/* The calibration data node is optional */
return -ENOENT;
}
- if (data_len != QCA988X_CAL_DATA_LEN) {
+ if (data_len != ar->hw_params.cal_data_len) {
ath10k_warn(ar, "invalid calibration data length in DT: %d\n",
data_len);
ret = -EMSGSIZE;
@@ -521,8 +525,7 @@ static int ath10k_download_cal_dt(struct ath10k *ar)
goto out;
}
- ret = of_property_read_u8_array(node, "qcom,ath10k-calibration-data",
- data, data_len);
+ ret = of_property_read_u8_array(node, dt_name, data, data_len);
if (ret) {
ath10k_warn(ar, "failed to read calibration data from DT: %d\n",
ret);
@@ -726,6 +729,14 @@ static int ath10k_fetch_cal_file(struct ath10k *ar)
{
char filename[100];
+ /* pre-cal-<bus>-<id>.bin */
+ scnprintf(filename, sizeof(filename), "pre-cal-%s-%s.bin",
+ ath10k_bus_str(ar->hif.bus), dev_name(ar->dev));
+
+ ar->pre_cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename);
+ if (!IS_ERR(ar->pre_cal_file))
+ goto success;
+
/* cal-<bus>-<id>.bin */
scnprintf(filename, sizeof(filename), "cal-%s-%s.bin",
ath10k_bus_str(ar->hif.bus), dev_name(ar->dev));
@@ -734,7 +745,7 @@ static int ath10k_fetch_cal_file(struct ath10k *ar)
if (IS_ERR(ar->cal_file))
/* calibration file is optional, don't print any warnings */
return PTR_ERR(ar->cal_file);
-
+success:
ath10k_dbg(ar, ATH10K_DBG_BOOT, "found calibration file %s/%s\n",
ATH10K_FW_DIR, filename);
@@ -1258,11 +1269,77 @@ success:
return 0;
}
+static int ath10k_core_pre_cal_download(struct ath10k *ar)
+{
+ int ret;
+
+ ret = ath10k_download_cal_file(ar, ar->pre_cal_file);
+ if (ret == 0) {
+ ar->cal_mode = ATH10K_PRE_CAL_MODE_FILE;
+ goto success;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "boot did not find a pre calibration file, try DT next: %d\n",
+ ret);
+
+ ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data");
+ if (ret) {
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "unable to load pre cal data from DT: %d\n", ret);
+ return ret;
+ }
+ ar->cal_mode = ATH10K_PRE_CAL_MODE_DT;
+
+success:
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n",
+ ath10k_cal_mode_str(ar->cal_mode));
+
+ return 0;
+}
+
+static int ath10k_core_pre_cal_config(struct ath10k *ar)
+{
+ int ret;
+
+ ret = ath10k_core_pre_cal_download(ar);
+ if (ret) {
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "failed to load pre cal data: %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_core_get_board_id_from_otp(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to get board id: %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_download_and_run_otp(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to run otp: %d\n", ret);
+ return ret;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "pre cal configuration done successfully\n");
+
+ return 0;
+}
+
static int ath10k_download_cal_data(struct ath10k *ar)
{
int ret;
- ret = ath10k_download_cal_file(ar);
+ ret = ath10k_core_pre_cal_config(ar);
+ if (ret == 0)
+ return 0;
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "pre cal download procedure failed, try cal file: %d\n",
+ ret);
+
+ ret = ath10k_download_cal_file(ar, ar->cal_file);
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_FILE;
goto done;
@@ -1272,7 +1349,7 @@ static int ath10k_download_cal_data(struct ath10k *ar)
"boot did not find a calibration file, try DT next: %d\n",
ret);
- ret = ath10k_download_cal_dt(ar);
+ ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data");
if (ret == 0) {
ar->cal_mode = ATH10K_CAL_MODE_DT;
goto done;
@@ -1509,7 +1586,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
case ATH10K_FW_WMI_OP_VERSION_10_1:
case ATH10K_FW_WMI_OP_VERSION_10_2:
case ATH10K_FW_WMI_OP_VERSION_10_2_4:
- if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
+ if (ath10k_peer_stats_enabled(ar)) {
ar->max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS;
ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS;
} else {
@@ -1538,9 +1615,15 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
- ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc;
- ar->fw_stats_req_mask = WMI_STAT_PEER;
+ ar->fw_stats_req_mask = WMI_10_4_STAT_PEER |
+ WMI_10_4_STAT_PEER_EXTD;
ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
+
+ if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL,
+ ar->fw_features))
+ ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC_PFC;
+ else
+ ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
break;
case ATH10K_FW_WMI_OP_VERSION_UNSET:
case ATH10K_FW_WMI_OP_VERSION_MAX:
@@ -1578,6 +1661,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
{
int status;
+ u32 val;
lockdep_assert_held(&ar->conf_mutex);
@@ -1698,6 +1782,21 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n",
ar->hw->wiphy->fw_version);
+ if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map)) {
+ val = 0;
+ if (ath10k_peer_stats_enabled(ar))
+ val = WMI_10_4_PEER_STATS;
+
+ status = ath10k_wmi_ext_resource_config(ar,
+ WMI_HOST_PLATFORM_HIGH_PERF, val);
+ if (status) {
+ ath10k_err(ar,
+ "failed to send ext resource cfg command : %d\n",
+ status);
+ goto err_hif_stop;
+ }
+ }
+
status = ath10k_wmi_cmd_init(ar);
if (status) {
ath10k_err(ar, "could not send WMI init command (%d)\n",
@@ -1834,11 +1933,20 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
ath10k_debug_print_hwfw_info(ar);
+ ret = ath10k_core_pre_cal_download(ar);
+ if (ret) {
+ /* pre calibration data download is not necessary
+ * for all the chipsets. Ignore failures and continue.
+ */
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "could not load pre cal data: %d\n", ret);
+ }
+
ret = ath10k_core_get_board_id_from_otp(ar);
if (ret && ret != -EOPNOTSUPP) {
ath10k_err(ar, "failed to get board id from otp: %d\n",
ret);
- return ret;
+ goto err_free_firmware_files;
}
ret = ath10k_core_fetch_board_file(ar);
@@ -2048,7 +2156,9 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
mutex_init(&ar->conf_mutex);
spin_lock_init(&ar->data_lock);
+ spin_lock_init(&ar->txqs_lock);
+ INIT_LIST_HEAD(&ar->txqs);
INIT_LIST_HEAD(&ar->peers);
init_waitqueue_head(&ar->peer_mapping_wq);
init_waitqueue_head(&ar->htt.empty_tx_wq);
generated by cgit v0.10.2 at 2024-07-08 20:50:01 (GMT)