diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c')
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 66 |
1 files changed, 55 insertions, 11 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index 3bd6fc1..33f4d7c 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -78,6 +78,7 @@ /* NVM offsets (in words) definitions */ enum wkp_nvm_offsets { /* NVM HW-Section offset (in words) definitions */ + SUBSYSTEM_ID = 0x0A, HW_ADDR = 0x15, /* NVM SW-Section offset (in words) definitions */ @@ -262,13 +263,12 @@ static u32 iwl_get_channel_flags(u8 ch_num, int ch_idx, bool is_5ghz, static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, struct iwl_nvm_data *data, const __le16 * const nvm_ch_flags, - bool lar_supported) + bool lar_supported, bool no_wide_in_5ghz) { int ch_idx; int n_channels = 0; struct ieee80211_channel *channel; u16 ch_flags; - bool is_5ghz; int num_of_ch, num_2ghz_channels; const u8 *nvm_chan; @@ -283,12 +283,20 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, } for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) { + bool is_5ghz = (ch_idx >= num_2ghz_channels); + ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx); - if (ch_idx >= num_2ghz_channels && - !data->sku_cap_band_52GHz_enable) + if (is_5ghz && !data->sku_cap_band_52GHz_enable) continue; + /* workaround to disable wide channels in 5GHz */ + if (no_wide_in_5ghz && is_5ghz) { + ch_flags &= ~(NVM_CHANNEL_40MHZ | + NVM_CHANNEL_80MHZ | + NVM_CHANNEL_160MHZ); + } + if (ch_flags & NVM_CHANNEL_160MHZ) data->vht160_supported = true; @@ -311,8 +319,8 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, n_channels++; channel->hw_value = nvm_chan[ch_idx]; - channel->band = (ch_idx < num_2ghz_channels) ? - NL80211_BAND_2GHZ : NL80211_BAND_5GHZ; + channel->band = is_5ghz ? + NL80211_BAND_5GHZ : NL80211_BAND_2GHZ; channel->center_freq = ieee80211_channel_to_frequency( channel->hw_value, channel->band); @@ -324,7 +332,6 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, * is not used in mvm, and is used for backwards compatibility */ channel->max_power = IWL_DEFAULT_MAX_TX_POWER; - is_5ghz = channel->band == NL80211_BAND_5GHZ; /* don't put limitations in case we're using LAR */ if (!lar_supported) @@ -441,7 +448,8 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg, static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg, struct iwl_nvm_data *data, const __le16 *ch_section, - u8 tx_chains, u8 rx_chains, bool lar_supported) + u8 tx_chains, u8 rx_chains, bool lar_supported, + bool no_wide_in_5ghz) { int n_channels; int n_used = 0; @@ -450,12 +458,14 @@ static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg, if (cfg->device_family != IWL_DEVICE_FAMILY_8000) n_channels = iwl_init_channel_map( dev, cfg, data, - &ch_section[NVM_CHANNELS], lar_supported); + &ch_section[NVM_CHANNELS], lar_supported, + no_wide_in_5ghz); else n_channels = iwl_init_channel_map( dev, cfg, data, &ch_section[NVM_CHANNELS_FAMILY_8000], - lar_supported); + lar_supported, + no_wide_in_5ghz); sband = &data->bands[NL80211_BAND_2GHZ]; sband->band = NL80211_BAND_2GHZ; @@ -658,6 +668,39 @@ static int iwl_set_hw_address(struct iwl_trans *trans, return 0; } +static bool +iwl_nvm_no_wide_in_5ghz(struct device *dev, const struct iwl_cfg *cfg, + const __le16 *nvm_hw) +{ + /* + * Workaround a bug in Indonesia SKUs where the regulatory in + * some 7000-family OTPs erroneously allow wide channels in + * 5GHz. To check for Indonesia, we take the SKU value from + * bits 1-4 in the subsystem ID and check if it is either 5 or + * 9. In those cases, we need to force-disable wide channels + * in 5GHz otherwise the FW will throw a sysassert when we try + * to use them. + */ + if (cfg->device_family == IWL_DEVICE_FAMILY_7000) { + /* + * Unlike the other sections in the NVM, the hw + * section uses big-endian. + */ + u16 subsystem_id = be16_to_cpup((const __be16 *)nvm_hw + + SUBSYSTEM_ID); + u8 sku = (subsystem_id & 0x1e) >> 1; + + if (sku == 5 || sku == 9) { + IWL_DEBUG_EEPROM(dev, + "disabling wide channels in 5GHz (0x%0x %d)\n", + subsystem_id, sku); + return true; + } + } + + return false; +} + struct iwl_nvm_data * iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, const __le16 *nvm_hw, const __le16 *nvm_sw, @@ -668,6 +711,7 @@ iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, struct device *dev = trans->dev; struct iwl_nvm_data *data; bool lar_enabled; + bool no_wide_in_5ghz = iwl_nvm_no_wide_in_5ghz(dev, cfg, nvm_hw); u32 sku, radio_cfg; u16 lar_config; const __le16 *ch_section; @@ -738,7 +782,7 @@ iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, } iwl_init_sbands(dev, cfg, data, ch_section, tx_chains, rx_chains, - lar_fw_supported && lar_enabled); + lar_fw_supported && lar_enabled, no_wide_in_5ghz); data->calib_version = 255; return data; |