diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/main.c')
| -rw-r--r-- | drivers/net/wireless/wl12xx/main.c | 2749 |
1 files changed, 2749 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c new file mode 100644 index 0000000..c005230 --- /dev/null +++ b/drivers/net/wireless/wl12xx/main.c @@ -0,0 +1,2749 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/crc32.h> +#include <linux/etherdevice.h> +#include <linux/vmalloc.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "reg.h" +#include "io.h" +#include "event.h" +#include "tx.h" +#include "rx.h" +#include "ps.h" +#include "init.h" +#include "debugfs.h" +#include "cmd.h" +#include "boot.h" +#include "testmode.h" +#include "scan.h" + +#define WL1271_BOOT_RETRIES 3 + +static struct conf_drv_settings default_conf = { + .sg = { + .params = { + [CONF_SG_BT_PER_THRESHOLD] = 7500, + [CONF_SG_HV3_MAX_OVERRIDE] = 0, + [CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400, + [CONF_SG_BT_LOAD_RATIO] = 50, + [CONF_SG_AUTO_PS_MODE] = 1, + [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, + [CONF_SG_ANTENNA_CONFIGURATION] = 0, + [CONF_SG_BEACON_MISS_PERCENT] = 60, + [CONF_SG_RATE_ADAPT_THRESH] = 12, + [CONF_SG_RATE_ADAPT_SNR] = 0, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 30, + [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 8, + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20, + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 50, + /* Note: with UPSD, this should be 4 */ + [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 8, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25, + [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 20, + /* Note: with UPDS, this should be 15 */ + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8, + /* Note: with UPDS, this should be 50 */ + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 40, + /* Note: with UPDS, this should be 10 */ + [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 20, + [CONF_SG_RXT] = 1200, + [CONF_SG_TXT] = 1000, + [CONF_SG_ADAPTIVE_RXT_TXT] = 1, + [CONF_SG_PS_POLL_TIMEOUT] = 10, + [CONF_SG_UPSD_TIMEOUT] = 10, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8, + [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800, + [CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75, + [CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15, + [CONF_SG_HV3_MAX_SERVED] = 6, + [CONF_SG_DHCP_TIME] = 5000, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100, + }, + .state = CONF_SG_PROTECTIVE, + }, + .rx = { + .rx_msdu_life_time = 512000, + .packet_detection_threshold = 0, + .ps_poll_timeout = 15, + .upsd_timeout = 15, + .rts_threshold = 2347, + .rx_cca_threshold = 0, + .irq_blk_threshold = 0xFFFF, + .irq_pkt_threshold = 0, + .irq_timeout = 600, + .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, + }, + .tx = { + .tx_energy_detection = 0, + .rc_conf = { + .enabled_rates = 0, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0 + }, + .ac_conf_count = 4, + .ac_conf = { + [CONF_TX_AC_BE] = { + .ac = CONF_TX_AC_BE, + .cw_min = 15, + .cw_max = 63, + .aifsn = 3, + .tx_op_limit = 0, + }, + [CONF_TX_AC_BK] = { + .ac = CONF_TX_AC_BK, + .cw_min = 15, + .cw_max = 63, + .aifsn = 7, + .tx_op_limit = 0, + }, + [CONF_TX_AC_VI] = { + .ac = CONF_TX_AC_VI, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 3008, + }, + [CONF_TX_AC_VO] = { + .ac = CONF_TX_AC_VO, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 1504, + }, + }, + .tid_conf_count = 4, + .tid_conf = { + [CONF_TX_AC_BE] = { + .queue_id = CONF_TX_AC_BE, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BE, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_BK] = { + .queue_id = CONF_TX_AC_BK, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BK, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VI] = { + .queue_id = CONF_TX_AC_VI, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VI, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VO] = { + .queue_id = CONF_TX_AC_VO, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VO, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + }, + .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, + .tx_compl_timeout = 700, + .tx_compl_threshold = 4, + .basic_rate = CONF_HW_BIT_RATE_1MBPS, + .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, + }, + .conn = { + .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, + .listen_interval = 1, + .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, + .bcn_filt_ie_count = 1, + .bcn_filt_ie = { + [0] = { + .ie = WLAN_EID_CHANNEL_SWITCH, + .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, + } + }, + .synch_fail_thold = 10, + .bss_lose_timeout = 100, + .beacon_rx_timeout = 10000, + .broadcast_timeout = 20000, + .rx_broadcast_in_ps = 1, + .ps_poll_threshold = 10, + .ps_poll_recovery_period = 700, + .bet_enable = CONF_BET_MODE_ENABLE, + .bet_max_consecutive = 10, + .psm_entry_retries = 5, + .psm_entry_nullfunc_retries = 3, + .psm_entry_hangover_period = 1, + .keep_alive_interval = 55000, + .max_listen_interval = 20, + }, + .itrim = { + .enable = false, + .timeout = 50000, + }, + .pm_config = { + .host_clk_settling_time = 5000, + .host_fast_wakeup_support = false + }, + .roam_trigger = { + .trigger_pacing = 1, + .avg_weight_rssi_beacon = 20, + .avg_weight_rssi_data = 10, + .avg_weight_snr_beacon = 20, + .avg_weight_snr_data = 10 + }, + .scan = { + .min_dwell_time_active = 7500, + .max_dwell_time_active = 30000, + .min_dwell_time_passive = 30000, + .max_dwell_time_passive = 60000, + .num_probe_reqs = 2, + }, + .rf = { + .tx_per_channel_power_compensation_2 = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .tx_per_channel_power_compensation_5 = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + }, +}; + +static void __wl1271_op_remove_interface(struct wl1271 *wl); + + +static void wl1271_device_release(struct device *dev) +{ + +} + +static struct platform_device wl1271_device = { + .name = "wl1271", + .id = -1, + + /* device model insists to have a release function */ + .dev = { + .release = wl1271_device_release, + }, +}; + +static LIST_HEAD(wl_list); + +static int wl1271_dev_notify(struct notifier_block *me, unsigned long what, + void *arg) +{ + struct net_device *dev = arg; + struct wireless_dev *wdev; + struct wiphy *wiphy; + struct ieee80211_hw *hw; + struct wl1271 *wl; + struct wl1271 *wl_temp; + int ret = 0; + + /* Check that this notification is for us. */ + if (what != NETDEV_CHANGE) + return NOTIFY_DONE; + + wdev = dev->ieee80211_ptr; + if (wdev == NULL) + return NOTIFY_DONE; + + wiphy = wdev->wiphy; + if (wiphy == NULL) + return NOTIFY_DONE; + + hw = wiphy_priv(wiphy); + if (hw == NULL) + return NOTIFY_DONE; + + wl_temp = hw->priv; + list_for_each_entry(wl, &wl_list, list) { + if (wl == wl_temp) + break; + } + if (wl != wl_temp) + return NOTIFY_DONE; + + mutex_lock(&wl->mutex); + + if (wl->state == WL1271_STATE_OFF) + goto out; + + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + if ((dev->operstate == IF_OPER_UP) && + !test_and_set_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags)) { + wl1271_cmd_set_sta_state(wl); + wl1271_info("Association completed."); + } + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return NOTIFY_OK; +} + +static void wl1271_conf_init(struct wl1271 *wl) +{ + + /* + * This function applies the default configuration to the driver. This + * function is invoked upon driver load (spi probe.) + * + * The configuration is stored in a run-time structure in order to + * facilitate for run-time adjustment of any of the parameters. Making + * changes to the configuration structure will apply the new values on + * the next interface up (wl1271_op_start.) + */ + + /* apply driver default configuration */ + memcpy(&wl->conf, &default_conf, sizeof(default_conf)); +} + + +static int wl1271_plt_init(struct wl1271 *wl) +{ + struct conf_tx_ac_category *conf_ac; + struct conf_tx_tid *conf_tid; + int ret, i; + + ret = wl1271_cmd_general_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_cmd_radio_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_cmd_ext_radio_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_init_templates_config(wl); + if (ret < 0) + return ret; + + ret = wl1271_acx_init_mem_config(wl); + if (ret < 0) + return ret; + + /* PHY layer config */ + ret = wl1271_init_phy_config(wl); + if (ret < 0) + goto out_free_memmap; + + ret = wl1271_acx_dco_itrim_params(wl); + if (ret < 0) + goto out_free_memmap; + + /* Initialize connection monitoring thresholds */ + ret = wl1271_acx_conn_monit_params(wl, false); + if (ret < 0) + goto out_free_memmap; + + /* Bluetooth WLAN coexistence */ + ret = wl1271_init_pta(wl); + if (ret < 0) + goto out_free_memmap; + + /* Energy detection */ + ret = wl1271_init_energy_detection(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default fragmentation threshold */ + ret = wl1271_acx_frag_threshold(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default TID/AC configuration */ + BUG_ON(wl->conf.tx.tid_conf_count != wl->conf.tx.ac_conf_count); + for (i = 0; i < wl->conf.tx.tid_conf_count; i++) { + conf_ac = &wl->conf.tx.ac_conf[i]; + ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min, + conf_ac->cw_max, conf_ac->aifsn, + conf_ac->tx_op_limit); + if (ret < 0) + goto out_free_memmap; + + conf_tid = &wl->conf.tx.tid_conf[i]; + ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id, + conf_tid->channel_type, + conf_tid->tsid, + conf_tid->ps_scheme, + conf_tid->ack_policy, + conf_tid->apsd_conf[0], + conf_tid->apsd_conf[1]); + if (ret < 0) + goto out_free_memmap; + } + + /* Enable data path */ + ret = wl1271_cmd_data_path(wl, 1); + if (ret < 0) + goto out_free_memmap; + + /* Configure for CAM power saving (ie. always active) */ + ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); + if (ret < 0) + goto out_free_memmap; + + /* configure PM */ + ret = wl1271_acx_pm_config(wl); + if (ret < 0) + goto out_free_memmap; + + return 0; + + out_free_memmap: + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + + return ret; +} + +static void wl1271_fw_status(struct wl1271 *wl, + struct wl1271_fw_status *status) +{ + struct timespec ts; + u32 total = 0; + int i; + + wl1271_raw_read(wl, FW_STATUS_ADDR, status, sizeof(*status), false); + + wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, " + "drv_rx_counter = %d, tx_results_counter = %d)", + status->intr, + status->fw_rx_counter, + status->drv_rx_counter, + status->tx_results_counter); + + /* update number of available TX blocks */ + for (i = 0; i < NUM_TX_QUEUES; i++) { + u32 cnt = le32_to_cpu(status->tx_released_blks[i]) - + wl->tx_blocks_freed[i]; + + wl->tx_blocks_freed[i] = + le32_to_cpu(status->tx_released_blks[i]); + wl->tx_blocks_available += cnt; + total += cnt; + } + + /* if more blocks are available now, tx work can be scheduled */ + if (total) + clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags); + + /* update the host-chipset time offset */ + getnstimeofday(&ts); + wl->time_offset = (timespec_to_ns(&ts) >> 10) - + (s64)le32_to_cpu(status->fw_localtime); +} + +#define WL1271_IRQ_MAX_LOOPS 10 + +static void wl1271_irq_work(struct work_struct *work) +{ + int ret; + u32 intr; + int loopcount = WL1271_IRQ_MAX_LOOPS; + unsigned long flags; + struct wl1271 *wl = + container_of(work, struct wl1271, irq_work); + + mutex_lock(&wl->mutex); + + wl1271_debug(DEBUG_IRQ, "IRQ work"); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, true); + if (ret < 0) + goto out; + + spin_lock_irqsave(&wl->wl_lock, flags); + while (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags) && loopcount) { + clear_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + loopcount--; + + wl1271_fw_status(wl, wl->fw_status); + intr = le32_to_cpu(wl->fw_status->intr); + if (!intr) { + wl1271_debug(DEBUG_IRQ, "Zero interrupt received."); + spin_lock_irqsave(&wl->wl_lock, flags); + continue; + } + + intr &= WL1271_INTR_MASK; + + if (unlikely(intr & WL1271_ACX_INTR_WATCHDOG)) { + wl1271_error("watchdog interrupt received! " + "starting recovery."); + ieee80211_queue_work(wl->hw, &wl->recovery_work); + + /* restarting the chip. ignore any other interrupt. */ + goto out; + } + + if (intr & WL1271_ACX_INTR_DATA) { + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA"); + + /* check for tx results */ + if (wl->fw_status->tx_results_counter != + (wl->tx_results_count & 0xff)) + wl1271_tx_complete(wl); + + /* Check if any tx blocks were freed */ + if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) && + !skb_queue_empty(&wl->tx_queue)) { + /* + * In order to avoid starvation of the TX path, + * call the work function directly. + */ + wl1271_tx_work_locked(wl); + } + + wl1271_rx(wl, wl->fw_status); + } + + if (intr & WL1271_ACX_INTR_EVENT_A) { + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A"); + wl1271_event_handle(wl, 0); + } + + if (intr & WL1271_ACX_INTR_EVENT_B) { + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B"); + wl1271_event_handle(wl, 1); + } + + if (intr & WL1271_ACX_INTR_INIT_COMPLETE) + wl1271_debug(DEBUG_IRQ, + "WL1271_ACX_INTR_INIT_COMPLETE"); + + if (intr & WL1271_ACX_INTR_HW_AVAILABLE) + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE"); + + spin_lock_irqsave(&wl->wl_lock, flags); + } + + if (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags)) + ieee80211_queue_work(wl->hw, &wl->irq_work); + else + clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); +} + +static int wl1271_fetch_firmware(struct wl1271 *wl) +{ + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl)); + + if (ret < 0) { + wl1271_error("could not get firmware: %d", ret); + return ret; + } + + if (fw->size % 4) { + wl1271_error("firmware size is not multiple of 32 bits: %zu", + fw->size); + ret = -EILSEQ; + goto out; + } + + wl->fw_len = fw->size; + wl->fw = vmalloc(wl->fw_len); + + if (!wl->fw) { + wl1271_error("could not allocate memory for the firmware"); + ret = -ENOMEM; + goto out; + } + + memcpy(wl->fw, fw->data, wl->fw_len); + + ret = 0; + +out: + release_firmware(fw); + + return ret; +} + +static int wl1271_fetch_nvs(struct wl1271 *wl) +{ + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl)); + + if (ret < 0) { + wl1271_error("could not get nvs file: %d", ret); + return ret; + } + + wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL); + + if (!wl->nvs) { + wl1271_error("could not allocate memory for the nvs file"); + ret = -ENOMEM; + goto out; + } + + wl->nvs_len = fw->size; + +out: + release_firmware(fw); + + return ret; +} + +static void wl1271_recovery_work(struct work_struct *work) +{ + struct wl1271 *wl = + container_of(work, struct wl1271, recovery_work); + + mutex_lock(&wl->mutex); + + if (wl->state != WL1271_STATE_ON) + goto out; + + wl1271_info("Hardware recovery in progress."); + + if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + ieee80211_connection_loss(wl->vif); + + /* reboot the chipset */ + __wl1271_op_remove_interface(wl); + ieee80211_restart_hw(wl->hw); + +out: + mutex_unlock(&wl->mutex); +} + +static void wl1271_fw_wakeup(struct wl1271 *wl) +{ + u32 elp_reg; + + elp_reg = ELPCTRL_WAKE_UP; + wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); +} + +static int wl1271_setup(struct wl1271 *wl) +{ + wl->fw_status = kmalloc(sizeof(*wl->fw_status), GFP_KERNEL); + if (!wl->fw_status) + return -ENOMEM; + + wl->tx_res_if = kmalloc(sizeof(*wl->tx_res_if), GFP_KERNEL); + if (!wl->tx_res_if) { + kfree(wl->fw_status); + return -ENOMEM; + } + + return 0; +} + +static int wl1271_chip_wakeup(struct wl1271 *wl) +{ + struct wl1271_partition_set partition; + int ret = 0; + + msleep(WL1271_PRE_POWER_ON_SLEEP); + ret = wl1271_power_on(wl); + if (ret < 0) + goto out; + msleep(WL1271_POWER_ON_SLEEP); + wl1271_io_reset(wl); + wl1271_io_init(wl); + + /* We don't need a real memory partition here, because we only want + * to use the registers at this point. */ + memset(&partition, 0, sizeof(partition)); + partition.reg.start = REGISTERS_BASE; + partition.reg.size = REGISTERS_DOWN_SIZE; + wl1271_set_partition(wl, &partition); + + /* ELP module wake up */ + wl1271_fw_wakeup(wl); + + /* whal_FwCtrl_BootSm() */ + + /* 0. read chip id from CHIP_ID */ + wl->chip.id = wl1271_read32(wl, CHIP_ID_B); + + /* 1. check if chip id is valid */ + + switch (wl->chip.id) { + case CHIP_ID_1271_PG10: + wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", + wl->chip.id); + + ret = wl1271_setup(wl); + if (ret < 0) + goto out; + break; + case CHIP_ID_1271_PG20: + wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)", + wl->chip.id); + + ret = wl1271_setup(wl); + if (ret < 0) + goto out; + break; + default: + wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); + ret = -ENODEV; + goto out; + } + + if (wl->fw == NULL) { + ret = wl1271_fetch_firmware(wl); + if (ret < 0) + goto out; + } + + /* No NVS from netlink, try to get it from the filesystem */ + if (wl->nvs == NULL) { + ret = wl1271_fetch_nvs(wl); + if (ret < 0) + goto out; + } + +out: + return ret; +} + +int wl1271_plt_start(struct wl1271 *wl) +{ + int retries = WL1271_BOOT_RETRIES; + int ret; + + mutex_lock(&wl->mutex); + + wl1271_notice("power up"); + + if (wl->state != WL1271_STATE_OFF) { + wl1271_error("cannot go into PLT state because not " + "in off state: %d", wl->state); + ret = -EBUSY; + goto out; + } + + while (retries) { + retries--; + ret = wl1271_chip_wakeup(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_boot(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_plt_init(wl); + if (ret < 0) + goto irq_disable; + + wl->state = WL1271_STATE_PLT; + wl1271_notice("firmware booted in PLT mode (%s)", + wl->chip.fw_ver); + goto out; + +irq_disable: + wl1271_disable_interrupts(wl); + mutex_unlock(&wl->mutex); + /* Unlocking the mutex in the middle of handling is + inherently unsafe. In this case we deem it safe to do, + because we need to let any possibly pending IRQ out of + the system (and while we are WL1271_STATE_OFF the IRQ + work function will not do anything.) Also, any other + possible concurrent operations will fail due to the + current state, hence the wl1271 struct should be safe. */ + cancel_work_sync(&wl->irq_work); + mutex_lock(&wl->mutex); +power_off: + wl1271_power_off(wl); + } + + wl1271_error("firmware boot in PLT mode failed despite %d retries", + WL1271_BOOT_RETRIES); +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +int wl1271_plt_stop(struct wl1271 *wl) +{ + int ret = 0; + + mutex_lock(&wl->mutex); + + wl1271_notice("power down"); + + if (wl->state != WL1271_STATE_PLT) { + wl1271_error("cannot power down because not in PLT " + "state: %d", wl->state); + ret = -EBUSY; + goto out; + } + + wl1271_disable_interrupts(wl); + wl1271_power_off(wl); + + wl->state = WL1271_STATE_OFF; + wl->rx_counter = 0; + +out: + mutex_unlock(&wl->mutex); + + cancel_work_sync(&wl->irq_work); + cancel_work_sync(&wl->recovery_work); + + return ret; +} + +static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct wl1271 *wl = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb); + struct ieee80211_sta *sta = txinfo->control.sta; + unsigned long flags; + + /* + * peek into the rates configured in the STA entry. + * The rates set after connection stage, The first block only BG sets: + * the compare is for bit 0-16 of sta_rate_set. The second block add + * HT rates in case of HT supported. + */ + spin_lock_irqsave(&wl->wl_lock, flags); + if (sta && + (sta->supp_rates[conf->channel->band] != + (wl->sta_rate_set & HW_BG_RATES_MASK))) { + wl->sta_rate_set = sta->supp_rates[conf->channel->band]; + set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags); + } + +#ifdef CONFIG_WL12XX_HT + if (sta && + sta->ht_cap.ht_supported && + ((wl->sta_rate_set >> HW_HT_RATES_OFFSET) != + sta->ht_cap.mcs.rx_mask[0])) { + /* Clean MCS bits before setting them */ + wl->sta_rate_set &= HW_BG_RATES_MASK; + wl->sta_rate_set |= + (sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET); + set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags); + } +#endif + spin_unlock_irqrestore(&wl->wl_lock, flags); + + /* queue the packet */ + skb_queue_tail(&wl->tx_queue, skb); + + /* + * The chip specific setup must run before the first TX packet - + * before that, the tx_work will not be initialized! + */ + + if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags)) + ieee80211_queue_work(wl->hw, &wl->tx_work); + + /* + * The workqueue is slow to process the tx_queue and we need stop + * the queue here, otherwise the queue will get too long. + */ + if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_HIGH_WATERMARK) { + wl1271_debug(DEBUG_TX, "op_tx: stopping queues"); + + spin_lock_irqsave(&wl->wl_lock, flags); + ieee80211_stop_queues(wl->hw); + set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + } + + return NETDEV_TX_OK; +} + +static struct notifier_block wl1271_dev_notifier = { + .notifier_call = wl1271_dev_notify, +}; + +static int wl1271_op_start(struct ieee80211_hw *hw) +{ + wl1271_debug(DEBUG_MAC80211, "mac80211 start"); + + /* + * We have to delay the booting of the hardware because + * we need to know the local MAC address before downloading and + * initializing the firmware. The MAC address cannot be changed + * after boot, and without the proper MAC address, the firmware + * will not function properly. + * + * The MAC address is first known when the corresponding interface + * is added. That is where we will initialize the hardware. + */ + + return 0; +} + +static void wl1271_op_stop(struct ieee80211_hw *hw) +{ + wl1271_debug(DEBUG_MAC80211, "mac80211 stop"); +} + +static int wl1271_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct wl1271 *wl = hw->priv; + struct wiphy *wiphy = hw->wiphy; + int retries = WL1271_BOOT_RETRIES; + int ret = 0; + bool booted = false; + + wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", + vif->type, vif->addr); + + mutex_lock(&wl->mutex); + if (wl->vif) { + wl1271_debug(DEBUG_MAC80211, + "multiple vifs are not supported yet"); + ret = -EBUSY; + goto out; + } + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + wl->bss_type = BSS_TYPE_STA_BSS; + wl->set_bss_type = BSS_TYPE_STA_BSS; + break; + case NL80211_IFTYPE_ADHOC: + wl->bss_type = BSS_TYPE_IBSS; + wl->set_bss_type = BSS_TYPE_STA_BSS; + break; + default: + ret = -EOPNOTSUPP; + goto out; + } + + memcpy(wl->mac_addr, vif->addr, ETH_ALEN); + + if (wl->state != WL1271_STATE_OFF) { + wl1271_error("cannot start because not in off state: %d", + wl->state); + ret = -EBUSY; + goto out; + } + + while (retries) { + retries--; + ret = wl1271_chip_wakeup(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_boot(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_hw_init(wl); + if (ret < 0) + goto irq_disable; + + booted = true; + break; + +irq_disable: + wl1271_disable_interrupts(wl); + mutex_unlock(&wl->mutex); + /* Unlocking the mutex in the middle of handling is + inherently unsafe. In this case we deem it safe to do, + because we need to let any possibly pending IRQ out of + the system (and while we are WL1271_STATE_OFF the IRQ + work function will not do anything.) Also, any other + possible concurrent operations will fail due to the + current state, hence the wl1271 struct should be safe. */ + cancel_work_sync(&wl->irq_work); + mutex_lock(&wl->mutex); +power_off: + wl1271_power_off(wl); + } + + if (!booted) { + wl1271_error("firmware boot failed despite %d retries", + WL1271_BOOT_RETRIES); + goto out; + } + + wl->vif = vif; + wl->state = WL1271_STATE_ON; + wl1271_info("firmware booted (%s)", wl->chip.fw_ver); + + /* update hw/fw version info in wiphy struct */ + wiphy->hw_version = wl->chip.id; + strncpy(wiphy->fw_version, wl->chip.fw_ver, + sizeof(wiphy->fw_version)); + +out: + mutex_unlock(&wl->mutex); + + if (!ret) + list_add(&wl->list, &wl_list); + + return ret; +} + +static void __wl1271_op_remove_interface(struct wl1271 *wl) +{ + int i; + + wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface"); + + wl1271_info("down"); + + list_del(&wl->list); + + WARN_ON(wl->state != WL1271_STATE_ON); + + /* enable dyn ps just in case (if left on due to fw crash etc) */ + if (wl->bss_type == BSS_TYPE_STA_BSS) + ieee80211_enable_dyn_ps(wl->vif); + + if (wl->scan.state != WL1271_SCAN_STATE_IDLE) { + wl->scan.state = WL1271_SCAN_STATE_IDLE; + kfree(wl->scan.scanned_ch); + wl->scan.scanned_ch = NULL; + wl->scan.req = NULL; + ieee80211_scan_completed(wl->hw, true); + } + + wl->state = WL1271_STATE_OFF; + + wl1271_disable_interrupts(wl); + + mutex_unlock(&wl->mutex); + + cancel_delayed_work_sync(&wl->scan_complete_work); + cancel_work_sync(&wl->irq_work); + cancel_work_sync(&wl->tx_work); + cancel_delayed_work_sync(&wl->pspoll_work); + cancel_delayed_work_sync(&wl->elp_work); + + mutex_lock(&wl->mutex); + + /* let's notify MAC80211 about the remaining pending TX frames */ + wl1271_tx_reset(wl); + wl1271_power_off(wl); + + memset(wl->bssid, 0, ETH_ALEN); + memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1); + wl->ssid_len = 0; + wl->bss_type = MAX_BSS_TYPE; + wl->set_bss_type = MAX_BSS_TYPE; + wl->band = IEEE80211_BAND_2GHZ; + + wl->rx_counter = 0; + wl->psm_entry_retry = 0; + wl->power_level = WL1271_DEFAULT_POWER_LEVEL; + wl->tx_blocks_available = 0; + wl->tx_results_count = 0; + wl->tx_packets_count = 0; + wl->tx_security_last_seq = 0; + wl->tx_security_seq = 0; + wl->time_offset = 0; + wl->session_counter = 0; + wl->rate_set = CONF_TX_RATE_MASK_BASIC; + wl->sta_rate_set = 0; + wl->flags = 0; + wl->vif = NULL; + wl->filters = 0; + + for (i = 0; i < NUM_TX_QUEUES; i++) + wl->tx_blocks_freed[i] = 0; + + wl1271_debugfs_reset(wl); + + kfree(wl->fw_status); + wl->fw_status = NULL; + kfree(wl->tx_res_if); + wl->tx_res_if = NULL; + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; +} + +static void wl1271_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct wl1271 *wl = hw->priv; + + mutex_lock(&wl->mutex); + WARN_ON(wl->vif != vif); + __wl1271_op_remove_interface(wl); + mutex_unlock(&wl->mutex); + + cancel_work_sync(&wl->recovery_work); +} + +static void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters) +{ + wl->rx_config = WL1271_DEFAULT_RX_CONFIG; + wl->rx_filter = WL1271_DEFAULT_RX_FILTER; + + /* combine requested filters with current filter config */ + filters = wl->filters | filters; + + wl1271_debug(DEBUG_FILTERS, "RX filters set: "); + + if (filters & FIF_PROMISC_IN_BSS) { + wl1271_debug(DEBUG_FILTERS, " - FIF_PROMISC_IN_BSS"); + wl->rx_config &= ~CFG_UNI_FILTER_EN; + wl->rx_config |= CFG_BSSID_FILTER_EN; + } + if (filters & FIF_BCN_PRBRESP_PROMISC) { + wl1271_debug(DEBUG_FILTERS, " - FIF_BCN_PRBRESP_PROMISC"); + wl->rx_config &= ~CFG_BSSID_FILTER_EN; + wl->rx_config &= ~CFG_SSID_FILTER_EN; + } + if (filters & FIF_OTHER_BSS) { + wl1271_debug(DEBUG_FILTERS, " - FIF_OTHER_BSS"); + wl->rx_config &= ~CFG_BSSID_FILTER_EN; + } + if (filters & FIF_CONTROL) { + wl1271_debug(DEBUG_FILTERS, " - FIF_CONTROL"); + wl->rx_filter |= CFG_RX_CTL_EN; + } + if (filters & FIF_FCSFAIL) { + wl1271_debug(DEBUG_FILTERS, " - FIF_FCSFAIL"); + wl->rx_filter |= CFG_RX_FCS_ERROR; + } +} + +static int wl1271_dummy_join(struct wl1271 *wl) +{ + int ret = 0; + /* we need to use a dummy BSSID for now */ + static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde, + 0xad, 0xbe, 0xef }; + + memcpy(wl->bssid, dummy_bssid, ETH_ALEN); + + /* pass through frames from all BSS */ + wl1271_configure_filters(wl, FIF_OTHER_BSS); + + ret = wl1271_cmd_join(wl, wl->set_bss_type); + if (ret < 0) + goto out; + + set_bit(WL1271_FLAG_JOINED, &wl->flags); + +out: + return ret; +} + +static int wl1271_join(struct wl1271 *wl, bool set_assoc) +{ + int ret; + + /* + * One of the side effects of the JOIN command is that is clears + * WPA/WPA2 keys from the chipset. Performing a JOIN while associated + * to a WPA/WPA2 access point will therefore kill the data-path. + * Currently there is no supported scenario for JOIN during + * association - if it becomes a supported scenario, the WPA/WPA2 keys + * must be handled somehow. + * + */ + if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + wl1271_info("JOIN while associated."); + + if (set_assoc) + set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); + + ret = wl1271_cmd_join(wl, wl->set_bss_type); + if (ret < 0) + goto out; + + set_bit(WL1271_FLAG_JOINED, &wl->flags); + + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + goto out; + + /* + * The join command disable the keep-alive mode, shut down its process, + * and also clear the template config, so we need to reset it all after + * the join. The acx_aid starts the keep-alive process, and the order + * of the commands below is relevant. + */ + ret = wl1271_acx_keep_alive_mode(wl, true); + if (ret < 0) + goto out; + + ret = wl1271_acx_aid(wl, wl->aid); + if (ret < 0) + goto out; + + ret = wl1271_cmd_build_klv_null_data(wl); + if (ret < 0) + goto out; + + ret = wl1271_acx_keep_alive_config(wl, CMD_TEMPL_KLV_IDX_NULL_DATA, + ACX_KEEP_ALIVE_TPL_VALID); + if (ret < 0) + goto out; + +out: + return ret; +} + +static int wl1271_unjoin(struct wl1271 *wl) +{ + int ret; + + /* to stop listening to a channel, we disconnect */ + ret = wl1271_cmd_disconnect(wl); + if (ret < 0) + goto out; + + clear_bit(WL1271_FLAG_JOINED, &wl->flags); + memset(wl->bssid, 0, ETH_ALEN); + + /* stop filterting packets based on bssid */ + wl1271_configure_filters(wl, FIF_OTHER_BSS); + +out: + return ret; +} + +static void wl1271_set_band_rate(struct wl1271 *wl) +{ + if (wl->band == IEEE80211_BAND_2GHZ) + wl->basic_rate_set = wl->conf.tx.basic_rate; + else + wl->basic_rate_set = wl->conf.tx.basic_rate_5; +} + +static u32 wl1271_min_rate_get(struct wl1271 *wl) +{ + int i; + u32 rate = 0; + + if (!wl->basic_rate_set) { + WARN_ON(1); + wl->basic_rate_set = wl->conf.tx.basic_rate; + } + + for (i = 0; !rate; i++) { + if ((wl->basic_rate_set >> i) & 0x1) + rate = 1 << i; + } + + return rate; +} + +static int wl1271_handle_idle(struct wl1271 *wl, bool idle) +{ + int ret; + + if (idle) { + if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { + ret = wl1271_unjoin(wl); + if (ret < 0) + goto out; + } + wl->rate_set = wl1271_min_rate_get(wl); + wl->sta_rate_set = 0; + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out; + ret = wl1271_acx_keep_alive_config( + wl, CMD_TEMPL_KLV_IDX_NULL_DATA, + ACX_KEEP_ALIVE_TPL_INVALID); + if (ret < 0) + goto out; + set_bit(WL1271_FLAG_IDLE, &wl->flags); + } else { + /* increment the session counter */ + wl->session_counter++; + if (wl->session_counter >= SESSION_COUNTER_MAX) + wl->session_counter = 0; + ret = wl1271_dummy_join(wl); + if (ret < 0) + goto out; + clear_bit(WL1271_FLAG_IDLE, &wl->flags); + } + +out: + return ret; +} + +static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) +{ + struct wl1271 *wl = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + int channel, ret = 0; + + channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + + wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d %s", + channel, + conf->flags & IEEE80211_CONF_PS ? "on" : "off", + conf->power_level, + conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use"); + + /* + * mac80211 will go to idle nearly immediately after transmitting some + * frames, such as the deauth. To make sure those frames reach the air, + * wait here until the TX queue is fully flushed. + */ + if ((changed & IEEE80211_CONF_CHANGE_IDLE) && + (conf->flags & IEEE80211_CONF_IDLE)) + wl1271_tx_flush(wl); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + /* if the channel changes while joined, join again */ + if (changed & IEEE80211_CONF_CHANGE_CHANNEL && + ((wl->band != conf->channel->band) || + (wl->channel != channel))) { + wl->band = conf->channel->band; + wl->channel = channel; + + /* + * FIXME: the mac80211 should really provide a fixed rate + * to use here. for now, just use the smallest possible rate + * for the band as a fixed rate for association frames and + * other control messages. + */ + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + wl1271_set_band_rate(wl); + + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + wl1271_warning("rate policy for update channel " + "failed %d", ret); + + if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { + ret = wl1271_join(wl, false); + if (ret < 0) + wl1271_warning("cmd join to update channel " + "failed %d", ret); + } + } + + if (changed & IEEE80211_CONF_CHANGE_IDLE) { + ret = wl1271_handle_idle(wl, conf->flags & IEEE80211_CONF_IDLE); + if (ret < 0) + wl1271_warning("idle mode change failed %d", ret); + } + + /* + * if mac80211 changes the PSM mode, make sure the mode is not + * incorrectly changed after the pspoll failure active window. + */ + if (changed & IEEE80211_CONF_CHANGE_PS) + clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags); + + if (conf->flags & IEEE80211_CONF_PS && + !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { + set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); + + /* + * We enter PSM only if we're already associated. + * If we're not, we'll enter it when joining an SSID, + * through the bss_info_changed() hook. + */ + if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) { + wl1271_debug(DEBUG_PSM, "psm enabled"); + ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, + wl->basic_rate, true); + } + } else if (!(conf->flags & IEEE80211_CONF_PS) && + test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { + wl1271_debug(DEBUG_PSM, "psm disabled"); + + clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); + + if (test_bit(WL1271_FLAG_PSM, &wl->flags)) + ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, + wl->basic_rate, true); + } + + if (conf->power_level != wl->power_level) { + ret = wl1271_acx_tx_power(wl, conf->power_level); + if (ret < 0) + goto out_sleep; + + wl->power_level = conf->power_level; + } + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +struct wl1271_filter_params { + bool enabled; + int mc_list_length; + u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN]; +}; + +static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, + struct netdev_hw_addr_list *mc_list) +{ + struct wl1271_filter_params *fp; + struct netdev_hw_addr *ha; + struct wl1271 *wl = hw->priv; + + if (unlikely(wl->state == WL1271_STATE_OFF)) + return 0; + + fp = kzalloc(sizeof(*fp), GFP_ATOMIC); + if (!fp) { + wl1271_error("Out of memory setting filters."); + return 0; + } + + /* update multicast filtering parameters */ + fp->mc_list_length = 0; + if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) { + fp->enabled = false; + } else { + fp->enabled = true; + netdev_hw_addr_list_for_each(ha, mc_list) { + memcpy(fp->mc_list[fp->mc_list_length], + ha->addr, ETH_ALEN); + fp->mc_list_length++; + } + } + + return (u64)(unsigned long)fp; +} + +#define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \ + FIF_ALLMULTI | \ + FIF_FCSFAIL | \ + FIF_BCN_PRBRESP_PROMISC | \ + FIF_CONTROL | \ + FIF_OTHER_BSS) + +static void wl1271_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed, + unsigned int *total, u64 multicast) +{ + struct wl1271_filter_params *fp = (void *)(unsigned long)multicast; + struct wl1271 *wl = hw->priv; + int ret; + + wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter"); + + mutex_lock(&wl->mutex); + + *total &= WL1271_SUPPORTED_FILTERS; + changed &= WL1271_SUPPORTED_FILTERS; + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + + if (*total & FIF_ALLMULTI) + ret = wl1271_acx_group_address_tbl(wl, false, NULL, 0); + else if (fp) + ret = wl1271_acx_group_address_tbl(wl, fp->enabled, + fp->mc_list, + fp->mc_list_length); + if (ret < 0) + goto out_sleep; + + /* determine, whether supported filter values have changed */ + if (changed == 0) + goto out_sleep; + + /* configure filters */ + wl->filters = *total; + wl1271_configure_filters(wl, 0); + + /* apply configured filters */ + ret = wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter); + if (ret < 0) + goto out_sleep; + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + kfree(fp); +} + +static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key_conf) +{ + struct wl1271 *wl = hw->priv; + const u8 *addr; + int ret; + u32 tx_seq_32 = 0; + u16 tx_seq_16 = 0; + u8 key_type; + + static const u8 bcast_addr[ETH_ALEN] = + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + + wl1271_debug(DEBUG_MAC80211, "mac80211 set key"); + + addr = sta ? sta->addr : bcast_addr; + + wl1271_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd); + wl1271_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN); + wl1271_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x", + key_conf->cipher, key_conf->keyidx, + key_conf->keylen, key_conf->flags); + wl1271_dump(DEBUG_CRYPT, "KEY: ", key_conf->key, key_conf->keylen); + + if (is_zero_ether_addr(addr)) { + /* We dont support TX only encryption */ + ret = -EOPNOTSUPP; + goto out; + } + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out_unlock; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out_unlock; + + switch (key_conf->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + key_type = KEY_WEP; + + key_conf->hw_key_idx = key_conf->keyidx; + break; + case WLAN_CIPHER_SUITE_TKIP: + key_type = KEY_TKIP; + + key_conf->hw_key_idx = key_conf->keyidx; + tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); + tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); + break; + case WLAN_CIPHER_SUITE_CCMP: + key_type = KEY_AES; + + key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); + tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); + break; + case WL1271_CIPHER_SUITE_GEM: + key_type = KEY_GEM; + tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); + tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); + break; + default: + wl1271_error("Unknown key algo 0x%x", key_conf->cipher); + + ret = -EOPNOTSUPP; + goto out_sleep; + } + + switch (cmd) { + case SET_KEY: + ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE, + key_conf->keyidx, key_type, + key_conf->keylen, key_conf->key, + addr, tx_seq_32, tx_seq_16); + if (ret < 0) { + wl1271_error("Could not add or replace key"); + goto out_sleep; + } + + /* the default WEP key needs to be configured at least once */ + if (key_type == KEY_WEP) { + ret = wl1271_cmd_set_default_wep_key(wl, + wl->default_key); + if (ret < 0) + goto out_sleep; + } + break; + + case DISABLE_KEY: + /* The wl1271 does not allow to remove unicast keys - they + will be cleared automatically on next CMD_JOIN. Ignore the + request silently, as we dont want the mac80211 to emit + an error message. */ + if (!is_broadcast_ether_addr(addr)) + break; + + ret = wl1271_cmd_set_key(wl, KEY_REMOVE, + key_conf->keyidx, key_type, + key_conf->keylen, key_conf->key, + addr, 0, 0); + if (ret < 0) { + wl1271_error("Could not remove key"); + goto out_sleep; + } + break; + + default: + wl1271_error("Unsupported key cmd 0x%x", cmd); + ret = -EOPNOTSUPP; + break; + } + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out_unlock: + mutex_unlock(&wl->mutex); + +out: + return ret; +} + +static int wl1271_op_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req) +{ + struct wl1271 *wl = hw->priv; + int ret; + u8 *ssid = NULL; + size_t len = 0; + + wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan"); + + if (req->n_ssids) { + ssid = req->ssids[0].ssid; + len = req->ssids[0].ssid_len; + } + + mutex_lock(&wl->mutex); + + if (wl->state == WL1271_STATE_OFF) { + /* + * We cannot return -EBUSY here because cfg80211 will expect + * a call to ieee80211_scan_completed if we do - in this case + * there won't be any call. + */ + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + ret = wl1271_scan(hw->priv, ssid, len, req); + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct wl1271 *wl = hw->priv; + int ret = 0; + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + ret = wl1271_acx_rts_threshold(wl, (u16) value); + if (ret < 0) + wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret); + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static void wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *beacon) +{ + u8 *ptr = beacon->data + + offsetof(struct ieee80211_mgmt, u.beacon.variable); + + /* find the location of the ssid in the beacon */ + while (ptr < beacon->data + beacon->len) { + if (ptr[0] == WLAN_EID_SSID) { + wl->ssid_len = ptr[1]; + memcpy(wl->ssid, ptr+2, wl->ssid_len); + return; + } + ptr += ptr[1]; + } + wl1271_error("ad-hoc beacon template has no SSID!\n"); +} + +static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + enum wl1271_cmd_ps_mode mode; + struct wl1271 *wl = hw->priv; + struct ieee80211_sta *sta = ieee80211_find_sta(vif, bss_conf->bssid); + bool do_join = false; + bool set_assoc = false; + int ret; + + wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed"); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + if ((changed & BSS_CHANGED_BEACON_INT) && + (wl->bss_type == BSS_TYPE_IBSS)) { + wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon interval updated: %d", + bss_conf->beacon_int); + + wl->beacon_int = bss_conf->beacon_int; + do_join = true; + } + + if ((changed & BSS_CHANGED_BEACON) && + (wl->bss_type == BSS_TYPE_IBSS)) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + + wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon updated"); + + if (beacon) { + struct ieee80211_hdr *hdr; + + wl1271_ssid_set(wl, beacon); + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, + beacon->data, + beacon->len, 0, + wl1271_min_rate_get(wl)); + + if (ret < 0) { + dev_kfree_skb(beacon); + goto out_sleep; + } + + hdr = (struct ieee80211_hdr *) beacon->data; + hdr->frame_control = cpu_to_le16( + IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_PROBE_RESP); + + ret = wl1271_cmd_template_set(wl, + CMD_TEMPL_PROBE_RESPONSE, + beacon->data, + beacon->len, 0, + wl1271_min_rate_get(wl)); + dev_kfree_skb(beacon); + if (ret < 0) + goto out_sleep; + + /* Need to update the SSID (for filtering etc) */ + do_join = true; + } + } + + if ((changed & BSS_CHANGED_BEACON_ENABLED) && + (wl->bss_type == BSS_TYPE_IBSS)) { + wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s", + bss_conf->enable_beacon ? "enabled" : "disabled"); + + if (bss_conf->enable_beacon) + wl->set_bss_type = BSS_TYPE_IBSS; + else + wl->set_bss_type = BSS_TYPE_STA_BSS; + do_join = true; + } + + if (changed & BSS_CHANGED_CQM) { + bool enable = false; + if (bss_conf->cqm_rssi_thold) + enable = true; + ret = wl1271_acx_rssi_snr_trigger(wl, enable, + bss_conf->cqm_rssi_thold, + bss_conf->cqm_rssi_hyst); + if (ret < 0) + goto out; + wl->rssi_thold = bss_conf->cqm_rssi_thold; + } + + if ((changed & BSS_CHANGED_BSSID) && + /* + * Now we know the correct bssid, so we send a new join command + * and enable the BSSID filter + */ + memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) { + memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN); + + ret = wl1271_cmd_build_null_data(wl); + if (ret < 0) + goto out_sleep; + + ret = wl1271_build_qos_null_data(wl); + if (ret < 0) + goto out_sleep; + + /* filter out all packets not from this BSSID */ + wl1271_configure_filters(wl, 0); + + /* Need to update the BSSID (for filtering etc) */ + do_join = true; + } + + if (changed & BSS_CHANGED_ASSOC) { + if (bss_conf->assoc) { + u32 rates; + wl->aid = bss_conf->aid; + set_assoc = true; + + wl->ps_poll_failures = 0; + + /* + * use basic rates from AP, and determine lowest rate + * to use with control frames. + */ + rates = bss_conf->basic_rates; + wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, + rates); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + + /* + * with wl1271, we don't need to update the + * beacon_int and dtim_period, because the firmware + * updates it by itself when the first beacon is + * received after a join. + */ + ret = wl1271_cmd_build_ps_poll(wl, wl->aid); + if (ret < 0) + goto out_sleep; + + /* + * The SSID is intentionally set to NULL here - the + * firmware will set the probe request with a + * broadcast SSID regardless of what we set in the + * template. + */ + ret = wl1271_cmd_build_probe_req(wl, NULL, 0, + NULL, 0, wl->band); + + /* enable the connection monitoring feature */ + ret = wl1271_acx_conn_monit_params(wl, true); + if (ret < 0) + goto out_sleep; + + /* If we want to go in PSM but we're not there yet */ + if (test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags) && + !test_bit(WL1271_FLAG_PSM, &wl->flags)) { + mode = STATION_POWER_SAVE_MODE; + ret = wl1271_ps_set_mode(wl, mode, + wl->basic_rate, + true); + if (ret < 0) + goto out_sleep; + } + } else { + /* use defaults when not associated */ + clear_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags); + clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); + wl->aid = 0; + + /* re-enable dynamic ps - just in case */ + ieee80211_enable_dyn_ps(wl->vif); + + /* revert back to minimum rates for the current band */ + wl1271_set_band_rate(wl); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + + /* disable connection monitor features */ + ret = wl1271_acx_conn_monit_params(wl, false); + + /* Disable the keep-alive feature */ + ret = wl1271_acx_keep_alive_mode(wl, false); + + if (ret < 0) + goto out_sleep; + } + + } + + if (changed & BSS_CHANGED_ERP_SLOT) { + if (bss_conf->use_short_slot) + ret = wl1271_acx_slot(wl, SLOT_TIME_SHORT); + else + ret = wl1271_acx_slot(wl, SLOT_TIME_LONG); + if (ret < 0) { + wl1271_warning("Set slot time failed %d", ret); + goto out_sleep; + } + } + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + if (bss_conf->use_short_preamble) + wl1271_acx_set_preamble(wl, ACX_PREAMBLE_SHORT); + else + wl1271_acx_set_preamble(wl, ACX_PREAMBLE_LONG); + } + + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + if (bss_conf->use_cts_prot) + ret = wl1271_acx_cts_protect(wl, CTSPROTECT_ENABLE); + else + ret = wl1271_acx_cts_protect(wl, CTSPROTECT_DISABLE); + if (ret < 0) { + wl1271_warning("Set ctsprotect failed %d", ret); + goto out_sleep; + } + } + + /* + * Takes care of: New association with HT enable, + * HT information change in beacon. + */ + if (sta && + (changed & BSS_CHANGED_HT) && + (bss_conf->channel_type != NL80211_CHAN_NO_HT)) { + ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true); + if (ret < 0) { + wl1271_warning("Set ht cap true failed %d", ret); + goto out_sleep; + } + ret = wl1271_acx_set_ht_information(wl, + bss_conf->ht_operation_mode); + if (ret < 0) { + wl1271_warning("Set ht information failed %d", ret); + goto out_sleep; + } + } + /* + * Takes care of: New association without HT, + * Disassociation. + */ + else if (sta && (changed & BSS_CHANGED_ASSOC)) { + ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, false); + if (ret < 0) { + wl1271_warning("Set ht cap false failed %d", ret); + goto out_sleep; + } + } + + if (changed & BSS_CHANGED_ARP_FILTER) { + __be32 addr = bss_conf->arp_addr_list[0]; + WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS); + + if (bss_conf->arp_addr_cnt == 1 && bss_conf->arp_filter_enabled) + ret = wl1271_acx_arp_ip_filter(wl, true, addr); + else + ret = wl1271_acx_arp_ip_filter(wl, false, addr); + + if (ret < 0) + goto out_sleep; + } + + if (do_join) { + ret = wl1271_join(wl, set_assoc); + if (ret < 0) { + wl1271_warning("cmd join failed %d", ret); + goto out_sleep; + } + } + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); +} + +static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct wl1271 *wl = hw->priv; + u8 ps_scheme; + int ret; + + mutex_lock(&wl->mutex); + + wl1271_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + /* the txop is confed in units of 32us by the mac80211, we need us */ + ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue), + params->cw_min, params->cw_max, + params->aifs, params->txop << 5); + if (ret < 0) + goto out_sleep; + + if (params->uapsd) + ps_scheme = CONF_PS_SCHEME_UPSD_TRIGGER; + else + ps_scheme = CONF_PS_SCHEME_LEGACY; + + ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue), + CONF_CHANNEL_TYPE_EDCF, + wl1271_tx_get_queue(queue), + ps_scheme, CONF_ACK_POLICY_LEGACY, 0, 0); + if (ret < 0) + goto out_sleep; + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static u64 wl1271_op_get_tsf(struct ieee80211_hw *hw) +{ + + struct wl1271 *wl = hw->priv; + u64 mactime = ULLONG_MAX; + int ret; + + wl1271_debug(DEBUG_MAC80211, "mac80211 get tsf"); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + ret = wl1271_acx_tsf_info(wl, &mactime); + if (ret < 0) + goto out_sleep; + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + return mactime; +} + +static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct wl1271 *wl = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + + if (idx != 0) + return -ENOENT; + + survey->channel = conf->channel; + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = wl->noise; + + return 0; +} + +/* can't be const, mac80211 writes to this */ +static struct ieee80211_rate wl1271_rates[] = { + { .bitrate = 10, + .hw_value = CONF_HW_BIT_RATE_1MBPS, + .hw_value_short = CONF_HW_BIT_RATE_1MBPS, }, + { .bitrate = 20, + .hw_value = CONF_HW_BIT_RATE_2MBPS, + .hw_value_short = CONF_HW_BIT_RATE_2MBPS, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = CONF_HW_BIT_RATE_5_5MBPS, + .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = CONF_HW_BIT_RATE_11MBPS, + .hw_value_short = CONF_HW_BIT_RATE_11MBPS, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = CONF_HW_BIT_RATE_6MBPS, + .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, + { .bitrate = 90, + .hw_value = CONF_HW_BIT_RATE_9MBPS, + .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, + { .bitrate = 120, + .hw_value = CONF_HW_BIT_RATE_12MBPS, + .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, + { .bitrate = 180, + .hw_value = CONF_HW_BIT_RATE_18MBPS, + .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, + { .bitrate = 240, + .hw_value = CONF_HW_BIT_RATE_24MBPS, + .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, + { .bitrate = 360, + .hw_value = CONF_HW_BIT_RATE_36MBPS, + .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, + { .bitrate = 480, + .hw_value = CONF_HW_BIT_RATE_48MBPS, + .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, + { .bitrate = 540, + .hw_value = CONF_HW_BIT_RATE_54MBPS, + .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, +}; + +/* + * Can't be const, mac80211 writes to this. The order of the channels here + * is designed to improve scanning. + */ +static struct ieee80211_channel wl1271_channels[] = { + { .hw_value = 1, .center_freq = 2412, .max_power = 25 }, + { .hw_value = 5, .center_freq = 2432, .max_power = 25 }, + { .hw_value = 9, .center_freq = 2452, .max_power = 25 }, + { .hw_value = 13, .center_freq = 2472, .max_power = 25 }, + { .hw_value = 4, .center_freq = 2427, .max_power = 25 }, + { .hw_value = 8, .center_freq = 2447, .max_power = 25 }, + { .hw_value = 12, .center_freq = 2467, .max_power = 25 }, + { .hw_value = 3, .center_freq = 2422, .max_power = 25 }, + { .hw_value = 7, .center_freq = 2442, .max_power = 25 }, + { .hw_value = 11, .center_freq = 2462, .max_power = 25 }, + { .hw_value = 2, .center_freq = 2417, .max_power = 25 }, + { .hw_value = 6, .center_freq = 2437, .max_power = 25 }, + { .hw_value = 10, .center_freq = 2457, .max_power = 25 }, +}; + +/* mapping to indexes for wl1271_rates */ +static const u8 wl1271_rate_to_idx_2ghz[] = { + /* MCS rates are used only with 11n */ + 7, /* CONF_HW_RXTX_RATE_MCS7 */ + 6, /* CONF_HW_RXTX_RATE_MCS6 */ + 5, /* CONF_HW_RXTX_RATE_MCS5 */ + 4, /* CONF_HW_RXTX_RATE_MCS4 */ + 3, /* CONF_HW_RXTX_RATE_MCS3 */ + 2, /* CONF_HW_RXTX_RATE_MCS2 */ + 1, /* CONF_HW_RXTX_RATE_MCS1 */ + 0, /* CONF_HW_RXTX_RATE_MCS0 */ + + 11, /* CONF_HW_RXTX_RATE_54 */ + 10, /* CONF_HW_RXTX_RATE_48 */ + 9, /* CONF_HW_RXTX_RATE_36 */ + 8, /* CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ + + 7, /* CONF_HW_RXTX_RATE_18 */ + 6, /* CONF_HW_RXTX_RATE_12 */ + 3, /* CONF_HW_RXTX_RATE_11 */ + 5, /* CONF_HW_RXTX_RATE_9 */ + 4, /* CONF_HW_RXTX_RATE_6 */ + 2, /* CONF_HW_RXTX_RATE_5_5 */ + 1, /* CONF_HW_RXTX_RATE_2 */ + 0 /* CONF_HW_RXTX_RATE_1 */ +}; + +/* 11n STA capabilities */ +#define HW_RX_HIGHEST_RATE 72 + +#ifdef CONFIG_WL12XX_HT +#define WL12XX_HT_CAP { \ + .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \ + .ht_supported = true, \ + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \ + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \ + .mcs = { \ + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, \ + .rx_highest = cpu_to_le16(HW_RX_HIGHEST_RATE), \ + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \ + }, \ +} +#else +#define WL12XX_HT_CAP { \ + .ht_supported = false, \ +} +#endif + +/* can't be const, mac80211 writes to this */ +static struct ieee80211_supported_band wl1271_band_2ghz = { + .channels = wl1271_channels, + .n_channels = ARRAY_SIZE(wl1271_channels), + .bitrates = wl1271_rates, + .n_bitrates = ARRAY_SIZE(wl1271_rates), + .ht_cap = WL12XX_HT_CAP, +}; + +/* 5 GHz data rates for WL1273 */ +static struct ieee80211_rate wl1271_rates_5ghz[] = { + { .bitrate = 60, + .hw_value = CONF_HW_BIT_RATE_6MBPS, + .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, + { .bitrate = 90, + .hw_value = CONF_HW_BIT_RATE_9MBPS, + .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, + { .bitrate = 120, + .hw_value = CONF_HW_BIT_RATE_12MBPS, + .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, + { .bitrate = 180, + .hw_value = CONF_HW_BIT_RATE_18MBPS, + .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, + { .bitrate = 240, + .hw_value = CONF_HW_BIT_RATE_24MBPS, + .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, + { .bitrate = 360, + .hw_value = CONF_HW_BIT_RATE_36MBPS, + .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, + { .bitrate = 480, + .hw_value = CONF_HW_BIT_RATE_48MBPS, + .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, + { .bitrate = 540, + .hw_value = CONF_HW_BIT_RATE_54MBPS, + .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, +}; + +/* + * 5 GHz band channels for WL1273 - can't be const, mac80211 writes to this. + * The order of the channels here is designed to improve scanning. + */ +static struct ieee80211_channel wl1271_channels_5ghz[] = { + { .hw_value = 183, .center_freq = 4915}, + { .hw_value = 188, .center_freq = 4940}, + { .hw_value = 8, .center_freq = 5040}, + { .hw_value = 34, .center_freq = 5170}, + { .hw_value = 44, .center_freq = 5220}, + { .hw_value = 60, .center_freq = 5300}, + { .hw_value = 112, .center_freq = 5560}, + { .hw_value = 132, .center_freq = 5660}, + { .hw_value = 157, .center_freq = 5785}, + { .hw_value = 184, .center_freq = 4920}, + { .hw_value = 189, .center_freq = 4945}, + { .hw_value = 9, .center_freq = 5045}, + { .hw_value = 36, .center_freq = 5180}, + { .hw_value = 46, .center_freq = 5230}, + { .hw_value = 64, .center_freq = 5320}, + { .hw_value = 116, .center_freq = 5580}, + { .hw_value = 136, .center_freq = 5680}, + { .hw_value = 192, .center_freq = 4960}, + { .hw_value = 11, .center_freq = 5055}, + { .hw_value = 38, .center_freq = 5190}, + { .hw_value = 48, .center_freq = 5240}, + { .hw_value = 100, .center_freq = 5500}, + { .hw_value = 120, .center_freq = 5600}, + { .hw_value = 140, .center_freq = 5700}, + { .hw_value = 185, .center_freq = 4925}, + { .hw_value = 196, .center_freq = 4980}, + { .hw_value = 12, .center_freq = 5060}, + { .hw_value = 40, .center_freq = 5200}, + { .hw_value = 52, .center_freq = 5260}, + { .hw_value = 104, .center_freq = 5520}, + { .hw_value = 124, .center_freq = 5620}, + { .hw_value = 149, .center_freq = 5745}, + { .hw_value = 161, .center_freq = 5805}, + { .hw_value = 187, .center_freq = 4935}, + { .hw_value = 7, .center_freq = 5035}, + { .hw_value = 16, .center_freq = 5080}, + { .hw_value = 42, .center_freq = 5210}, + { .hw_value = 56, .center_freq = 5280}, + { .hw_value = 108, .center_freq = 5540}, + { .hw_value = 128, .center_freq = 5640}, + { .hw_value = 153, .center_freq = 5765}, + { .hw_value = 165, .center_freq = 5825}, +}; + +/* mapping to indexes for wl1271_rates_5ghz */ +static const u8 wl1271_rate_to_idx_5ghz[] = { + /* MCS rates are used only with 11n */ + 7, /* CONF_HW_RXTX_RATE_MCS7 */ + 6, /* CONF_HW_RXTX_RATE_MCS6 */ + 5, /* CONF_HW_RXTX_RATE_MCS5 */ + 4, /* CONF_HW_RXTX_RATE_MCS4 */ + 3, /* CONF_HW_RXTX_RATE_MCS3 */ + 2, /* CONF_HW_RXTX_RATE_MCS2 */ + 1, /* CONF_HW_RXTX_RATE_MCS1 */ + 0, /* CONF_HW_RXTX_RATE_MCS0 */ + + 7, /* CONF_HW_RXTX_RATE_54 */ + 6, /* CONF_HW_RXTX_RATE_48 */ + 5, /* CONF_HW_RXTX_RATE_36 */ + 4, /* CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ + + 3, /* CONF_HW_RXTX_RATE_18 */ + 2, /* CONF_HW_RXTX_RATE_12 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_11 */ + 1, /* CONF_HW_RXTX_RATE_9 */ + 0, /* CONF_HW_RXTX_RATE_6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_5_5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED /* CONF_HW_RXTX_RATE_1 */ +}; + +static struct ieee80211_supported_band wl1271_band_5ghz = { + .channels = wl1271_channels_5ghz, + .n_channels = ARRAY_SIZE(wl1271_channels_5ghz), + .bitrates = wl1271_rates_5ghz, + .n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz), + .ht_cap = WL12XX_HT_CAP, +}; + +static const u8 *wl1271_band_rate_to_idx[] = { + [IEEE80211_BAND_2GHZ] = wl1271_rate_to_idx_2ghz, + [IEEE80211_BAND_5GHZ] = wl1271_rate_to_idx_5ghz +}; + +static const struct ieee80211_ops wl1271_ops = { + .start = wl1271_op_start, + .stop = wl1271_op_stop, + .add_interface = wl1271_op_add_interface, + .remove_interface = wl1271_op_remove_interface, + .config = wl1271_op_config, + .prepare_multicast = wl1271_op_prepare_multicast, + .configure_filter = wl1271_op_configure_filter, + .tx = wl1271_op_tx, + .set_key = wl1271_op_set_key, + .hw_scan = wl1271_op_hw_scan, + .bss_info_changed = wl1271_op_bss_info_changed, + .set_rts_threshold = wl1271_op_set_rts_threshold, + .conf_tx = wl1271_op_conf_tx, + .get_tsf = wl1271_op_get_tsf, + .get_survey = wl1271_op_get_survey, + CFG80211_TESTMODE_CMD(wl1271_tm_cmd) +}; + + +u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band) +{ + u8 idx; + + BUG_ON(band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *)); + + if (unlikely(rate >= CONF_HW_RXTX_RATE_MAX)) { + wl1271_error("Illegal RX rate from HW: %d", rate); + return 0; + } + + idx = wl1271_band_rate_to_idx[band][rate]; + if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) { + wl1271_error("Unsupported RX rate from HW: %d", rate); + return 0; + } + + return idx; +} + +static ssize_t wl1271_sysfs_show_bt_coex_state(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct wl1271 *wl = dev_get_drvdata(dev); + ssize_t len; + + len = PAGE_SIZE; + + mutex_lock(&wl->mutex); + len = snprintf(buf, len, "%d\n\n0 - off\n1 - on\n", + wl->sg_enabled); + mutex_unlock(&wl->mutex); + + return len; + +} + +static ssize_t wl1271_sysfs_store_bt_coex_state(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct wl1271 *wl = dev_get_drvdata(dev); + unsigned long res; + int ret; + + ret = strict_strtoul(buf, 10, &res); + + if (ret < 0) { + wl1271_warning("incorrect value written to bt_coex_mode"); + return count; + } + + mutex_lock(&wl->mutex); + + res = !!res; + + if (res == wl->sg_enabled) + goto out; + + wl->sg_enabled = res; + + if (wl->state == WL1271_STATE_OFF) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + wl1271_acx_sg_enable(wl, wl->sg_enabled); + wl1271_ps_elp_sleep(wl); + + out: + mutex_unlock(&wl->mutex); + return count; +} + +static DEVICE_ATTR(bt_coex_state, S_IRUGO | S_IWUSR, + wl1271_sysfs_show_bt_coex_state, + wl1271_sysfs_store_bt_coex_state); + +static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct wl1271 *wl = dev_get_drvdata(dev); + ssize_t len; + + len = PAGE_SIZE; + + mutex_lock(&wl->mutex); + if (wl->hw_pg_ver >= 0) + len = snprintf(buf, len, "%d\n", wl->hw_pg_ver); + else + len = snprintf(buf, len, "n/a\n"); + mutex_unlock(&wl->mutex); + + return len; +} + +static DEVICE_ATTR(hw_pg_ver, S_IRUGO | S_IWUSR, + wl1271_sysfs_show_hw_pg_ver, NULL); + +int wl1271_register_hw(struct wl1271 *wl) +{ + int ret; + + if (wl->mac80211_registered) + return 0; + + SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); + + ret = ieee80211_register_hw(wl->hw); + if (ret < 0) { + wl1271_error("unable to register mac80211 hw: %d", ret); + return ret; + } + + wl->mac80211_registered = true; + + register_netdevice_notifier(&wl1271_dev_notifier); + + wl1271_notice("loaded"); + + return 0; +} +EXPORT_SYMBOL_GPL(wl1271_register_hw); + +void wl1271_unregister_hw(struct wl1271 *wl) +{ + unregister_netdevice_notifier(&wl1271_dev_notifier); + ieee80211_unregister_hw(wl->hw); + wl->mac80211_registered = false; + +} +EXPORT_SYMBOL_GPL(wl1271_unregister_hw); + +int wl1271_init_ieee80211(struct wl1271 *wl) +{ + static const u32 cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, + WL1271_CIPHER_SUITE_GEM, + }; + + /* The tx descriptor buffer and the TKIP space. */ + wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE + + sizeof(struct wl1271_tx_hw_descr); + + /* unit us */ + /* FIXME: find a proper value */ + wl->hw->channel_change_time = 10000; + wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval; + + wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_BEACON_FILTER | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_UAPSD | + IEEE80211_HW_HAS_RATE_CONTROL | + IEEE80211_HW_CONNECTION_MONITOR | + IEEE80211_HW_SUPPORTS_CQM_RSSI; + + wl->hw->wiphy->cipher_suites = cipher_suites; + wl->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + + wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + wl->hw->wiphy->max_scan_ssids = 1; + wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz; + wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz; + + wl->hw->queues = 4; + wl->hw->max_rates = 1; + + SET_IEEE80211_DEV(wl->hw, wl1271_wl_to_dev(wl)); + + return 0; +} +EXPORT_SYMBOL_GPL(wl1271_init_ieee80211); + +#define WL1271_DEFAULT_CHANNEL 0 + +struct ieee80211_hw *wl1271_alloc_hw(void) +{ + struct ieee80211_hw *hw; + struct platform_device *plat_dev = NULL; + struct wl1271 *wl; + int i, ret; + unsigned int order; + + hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops); + if (!hw) { + wl1271_error("could not alloc ieee80211_hw"); + ret = -ENOMEM; + goto err_hw_alloc; + } + + plat_dev = kmemdup(&wl1271_device, sizeof(wl1271_device), GFP_KERNEL); + if (!plat_dev) { + wl1271_error("could not allocate platform_device"); + ret = -ENOMEM; + goto err_plat_alloc; + } + + wl = hw->priv; + memset(wl, 0, sizeof(*wl)); + + INIT_LIST_HEAD(&wl->list); + + wl->hw = hw; + wl->plat_dev = plat_dev; + + skb_queue_head_init(&wl->tx_queue); + + INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work); + INIT_DELAYED_WORK(&wl->pspoll_work, wl1271_pspoll_work); + INIT_WORK(&wl->irq_work, wl1271_irq_work); + INIT_WORK(&wl->tx_work, wl1271_tx_work); + INIT_WORK(&wl->recovery_work, wl1271_recovery_work); + INIT_DELAYED_WORK(&wl->scan_complete_work, wl1271_scan_complete_work); + wl->channel = WL1271_DEFAULT_CHANNEL; + wl->beacon_int = WL1271_DEFAULT_BEACON_INT; + wl->default_key = 0; + wl->rx_counter = 0; + wl->rx_config = WL1271_DEFAULT_RX_CONFIG; + wl->rx_filter = WL1271_DEFAULT_RX_FILTER; + wl->psm_entry_retry = 0; + wl->power_level = WL1271_DEFAULT_POWER_LEVEL; + wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC; + wl->basic_rate = CONF_TX_RATE_MASK_BASIC; + wl->rate_set = CONF_TX_RATE_MASK_BASIC; + wl->sta_rate_set = 0; + wl->band = IEEE80211_BAND_2GHZ; + wl->vif = NULL; + wl->flags = 0; + wl->sg_enabled = true; + wl->hw_pg_ver = -1; + + memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map)); + for (i = 0; i < ACX_TX_DESCRIPTORS; i++) + wl->tx_frames[i] = NULL; + + spin_lock_init(&wl->wl_lock); + + wl->state = WL1271_STATE_OFF; + mutex_init(&wl->mutex); + + /* Apply default driver configuration. */ + wl1271_conf_init(wl); + + wl1271_debugfs_init(wl); + + order = get_order(WL1271_AGGR_BUFFER_SIZE); + wl->aggr_buf = (u8 *)__get_free_pages(GFP_KERNEL, order); + if (!wl->aggr_buf) { + ret = -ENOMEM; + goto err_hw; + } + + /* Register platform device */ + ret = platform_device_register(wl->plat_dev); + if (ret) { + wl1271_error("couldn't register platform device"); + goto err_aggr; + } + dev_set_drvdata(&wl->plat_dev->dev, wl); + + /* Create sysfs file to control bt coex state */ + ret = device_create_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state); + if (ret < 0) { + wl1271_error("failed to create sysfs file bt_coex_state"); + goto err_platform; + } + + /* Create sysfs file to get HW PG version */ + ret = device_create_file(&wl->plat_dev->dev, &dev_attr_hw_pg_ver); + if (ret < 0) { + wl1271_error("failed to create sysfs file hw_pg_ver"); + goto err_bt_coex_state; + } + + return hw; + +err_bt_coex_state: + device_remove_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state); + +err_platform: + platform_device_unregister(wl->plat_dev); + +err_aggr: + free_pages((unsigned long)wl->aggr_buf, order); + +err_hw: + wl1271_debugfs_exit(wl); + kfree(plat_dev); + +err_plat_alloc: + ieee80211_free_hw(hw); + +err_hw_alloc: + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(wl1271_alloc_hw); + +int wl1271_free_hw(struct wl1271 *wl) +{ + platform_device_unregister(wl->plat_dev); + free_pages((unsigned long)wl->aggr_buf, + get_order(WL1271_AGGR_BUFFER_SIZE)); + kfree(wl->plat_dev); + + wl1271_debugfs_exit(wl); + + vfree(wl->fw); + wl->fw = NULL; + kfree(wl->nvs); + wl->nvs = NULL; + + kfree(wl->fw_status); + kfree(wl->tx_res_if); + + ieee80211_free_hw(wl->hw); + + return 0; +} +EXPORT_SYMBOL_GPL(wl1271_free_hw); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>"); +MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |