diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/phy/at803x.c | 185 |
1 files changed, 144 insertions, 41 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index bc04fba..3cbd82f 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -16,9 +16,13 @@ #include <linux/string.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> #define AT803X_INTR_ENABLE 0x12 #define AT803X_INTR_STATUS 0x13 +#define AT803X_SMART_SPEED 0x14 +#define AT803X_LED_CONTROL 0x18 #define AT803X_WOL_ENABLE 0x01 #define AT803X_DEVICE_ADDR 0x03 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C @@ -43,6 +47,44 @@ MODULE_DESCRIPTION("Atheros 803x PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); MODULE_LICENSE("GPL"); +struct at803x_priv { + bool phy_reset:1; + struct gpio_desc *gpiod_reset; +}; + +struct at803x_context { + u16 bmcr; + u16 advertise; + u16 control1000; + u16 int_enable; + u16 smart_speed; + u16 led_control; +}; + +/* save relevant PHY registers to private copy */ +static void at803x_context_save(struct phy_device *phydev, + struct at803x_context *context) +{ + context->bmcr = phy_read(phydev, MII_BMCR); + context->advertise = phy_read(phydev, MII_ADVERTISE); + context->control1000 = phy_read(phydev, MII_CTRL1000); + context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE); + context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED); + context->led_control = phy_read(phydev, AT803X_LED_CONTROL); +} + +/* restore relevant PHY registers from private copy */ +static void at803x_context_restore(struct phy_device *phydev, + const struct at803x_context *context) +{ + phy_write(phydev, MII_BMCR, context->bmcr); + phy_write(phydev, MII_ADVERTISE, context->advertise); + phy_write(phydev, MII_CTRL1000, context->control1000); + phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable); + phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed); + phy_write(phydev, AT803X_LED_CONTROL, context->led_control); +} + static int at803x_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { @@ -146,6 +188,26 @@ static int at803x_resume(struct phy_device *phydev) return 0; } +static int at803x_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct at803x_priv *priv; + + priv = devm_kzalloc(dev, sizeof(priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->gpiod_reset = devm_gpiod_get(dev, "reset"); + if (IS_ERR(priv->gpiod_reset)) + priv->gpiod_reset = NULL; + else + gpiod_direction_output(priv->gpiod_reset, 1); + + phydev->priv = priv; + + return 0; +} + static int at803x_config_init(struct phy_device *phydev) { int ret; @@ -193,58 +255,99 @@ static int at803x_config_intr(struct phy_device *phydev) return err; } +static void at803x_link_change_notify(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + /* + * Conduct a hardware reset for AT8030 every time a link loss is + * signalled. This is necessary to circumvent a hardware bug that + * occurs when the cable is unplugged while TX packets are pending + * in the FIFO. In such cases, the FIFO enters an error mode it + * cannot recover from by software. + */ + if (phydev->drv->phy_id == ATH8030_PHY_ID) { + if (phydev->state == PHY_NOLINK) { + if (priv->gpiod_reset && !priv->phy_reset) { + struct at803x_context context; + + at803x_context_save(phydev, &context); + + gpiod_set_value(priv->gpiod_reset, 0); + msleep(1); + gpiod_set_value(priv->gpiod_reset, 1); + msleep(1); + + at803x_context_restore(phydev, &context); + + dev_dbg(&phydev->dev, "%s(): phy was reset\n", + __func__); + priv->phy_reset = true; + } + } else { + priv->phy_reset = false; + } + } +} + static struct phy_driver at803x_driver[] = { { /* ATHEROS 8035 */ - .phy_id = ATH8035_PHY_ID, - .name = "Atheros 8035 ethernet", - .phy_id_mask = 0xffffffef, - .config_init = at803x_config_init, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, - .resume = at803x_resume, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .driver = { + .phy_id = ATH8035_PHY_ID, + .name = "Atheros 8035 ethernet", + .phy_id_mask = 0xffffffef, + .probe = at803x_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, }, { /* ATHEROS 8030 */ - .phy_id = ATH8030_PHY_ID, - .name = "Atheros 8030 ethernet", - .phy_id_mask = 0xffffffef, - .config_init = at803x_config_init, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, - .resume = at803x_resume, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .driver = { + .phy_id = ATH8030_PHY_ID, + .name = "Atheros 8030 ethernet", + .phy_id_mask = 0xffffffef, + .probe = at803x_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .driver = { .owner = THIS_MODULE, }, }, { /* ATHEROS 8031 */ - .phy_id = ATH8031_PHY_ID, - .name = "Atheros 8031 ethernet", - .phy_id_mask = 0xffffffef, - .config_init = at803x_config_init, - .set_wol = at803x_set_wol, - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, - .resume = at803x_resume, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .ack_interrupt = &at803x_ack_interrupt, - .config_intr = &at803x_config_intr, - .driver = { + .phy_id = ATH8031_PHY_ID, + .name = "Atheros 8031 ethernet", + .phy_id_mask = 0xffffffef, + .probe = at803x_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = &at803x_ack_interrupt, + .config_intr = &at803x_config_intr, + .driver = { .owner = THIS_MODULE, }, } }; |