diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/dsa/bcm_sf2.c | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index a97ba25..29ceee3 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -606,6 +606,89 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, status->pause = 1; } +static int bcm_sf2_sw_suspend(struct dsa_switch *ds) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + unsigned int port; + + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); + intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); + intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR); + + /* Disable all ports physically present including the IMP + * port, the other ones have already been disabled during + * bcm_sf2_sw_setup + */ + for (port = 0; port < DSA_MAX_PORTS; port++) { + if ((1 << port) & ds->phys_port_mask || + dsa_is_cpu_port(ds, port)) + bcm_sf2_port_disable(ds, port); + } + + return 0; +} + +static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv) +{ + unsigned int timeout = 1000; + u32 reg; + + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET; + core_writel(priv, reg, CORE_WATCHDOG_CTRL); + + do { + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + if (!(reg & SOFTWARE_RESET)) + break; + + usleep_range(1000, 2000); + } while (timeout-- > 0); + + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} + +static int bcm_sf2_sw_resume(struct dsa_switch *ds) +{ + struct bcm_sf2_priv *priv = ds_to_priv(ds); + unsigned int port; + u32 reg; + int ret; + + ret = bcm_sf2_sw_rst(priv); + if (ret) { + pr_err("%s: failed to software reset switch\n", __func__); + return ret; + } + + /* Reinitialize the single GPHY */ + if (priv->hw_params.num_gphy == 1) { + reg = reg_readl(priv, REG_SPHY_CNTRL); + reg |= PHY_RESET; + reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS); + reg_writel(priv, reg, REG_SPHY_CNTRL); + udelay(21); + reg = reg_readl(priv, REG_SPHY_CNTRL); + reg &= ~PHY_RESET; + reg_writel(priv, reg, REG_SPHY_CNTRL); + } + + for (port = 0; port < DSA_MAX_PORTS; port++) { + if ((1 << port) & ds->phys_port_mask) + bcm_sf2_port_setup(ds, port); + else if (dsa_is_cpu_port(ds, port)) + bcm_sf2_imp_setup(ds, port); + } + + return 0; +} + static struct dsa_switch_driver bcm_sf2_switch_driver = { .tag_protocol = DSA_TAG_PROTO_BRCM, .priv_size = sizeof(struct bcm_sf2_priv), @@ -620,6 +703,8 @@ static struct dsa_switch_driver bcm_sf2_switch_driver = { .get_sset_count = bcm_sf2_sw_get_sset_count, .adjust_link = bcm_sf2_sw_adjust_link, .fixed_link_update = bcm_sf2_sw_fixed_link_update, + .suspend = bcm_sf2_sw_suspend, + .resume = bcm_sf2_sw_resume, }; static int __init bcm_sf2_init(void) |