diff options
Diffstat (limited to 'drivers/nfc')
| -rw-r--r-- | drivers/nfc/fdp/i2c.c | 6 | ||||
| -rw-r--r-- | drivers/nfc/nfcmrvl/fw_dnld.c | 7 | ||||
| -rw-r--r-- | drivers/nfc/nfcmrvl/main.c | 35 | ||||
| -rw-r--r-- | drivers/nfc/nfcmrvl/uart.c | 8 | ||||
| -rw-r--r-- | drivers/nfc/port100.c | 35 |
5 files changed, 55 insertions, 36 deletions
diff --git a/drivers/nfc/fdp/i2c.c b/drivers/nfc/fdp/i2c.c index 5e797d5..712936f 100644 --- a/drivers/nfc/fdp/i2c.c +++ b/drivers/nfc/fdp/i2c.c @@ -210,14 +210,14 @@ static irqreturn_t fdp_nci_i2c_irq_thread_fn(int irq, void *phy_id) struct sk_buff *skb; int r; - client = phy->i2c_dev; - dev_dbg(&client->dev, "%s\n", __func__); - if (!phy || irq != phy->i2c_dev->irq) { WARN_ON_ONCE(1); return IRQ_NONE; } + client = phy->i2c_dev; + dev_dbg(&client->dev, "%s\n", __func__); + r = fdp_nci_i2c_read(phy, &skb); if (r == -EREMOTEIO) diff --git a/drivers/nfc/nfcmrvl/fw_dnld.c b/drivers/nfc/nfcmrvl/fw_dnld.c index f8dcdf4..af62c4c 100644 --- a/drivers/nfc/nfcmrvl/fw_dnld.c +++ b/drivers/nfc/nfcmrvl/fw_dnld.c @@ -459,7 +459,7 @@ int nfcmrvl_fw_dnld_init(struct nfcmrvl_private *priv) INIT_WORK(&priv->fw_dnld.rx_work, fw_dnld_rx_work); snprintf(name, sizeof(name), "%s_nfcmrvl_fw_dnld_rx_wq", - dev_name(priv->dev)); + dev_name(&priv->ndev->nfc_dev->dev)); priv->fw_dnld.rx_wq = create_singlethread_workqueue(name); if (!priv->fw_dnld.rx_wq) return -ENOMEM; @@ -496,6 +496,7 @@ int nfcmrvl_fw_dnld_start(struct nci_dev *ndev, const char *firmware_name) { struct nfcmrvl_private *priv = nci_get_drvdata(ndev); struct nfcmrvl_fw_dnld *fw_dnld = &priv->fw_dnld; + int res; if (!priv->support_fw_dnld) return -ENOTSUPP; @@ -511,7 +512,9 @@ int nfcmrvl_fw_dnld_start(struct nci_dev *ndev, const char *firmware_name) */ /* Retrieve FW binary */ - if (request_firmware(&fw_dnld->fw, firmware_name, priv->dev) < 0) { + res = request_firmware(&fw_dnld->fw, firmware_name, + &ndev->nfc_dev->dev); + if (res < 0) { nfc_err(priv->dev, "failed to retrieve FW %s", firmware_name); return -ENOENT; } diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c index 51c8240..a446590 100644 --- a/drivers/nfc/nfcmrvl/main.c +++ b/drivers/nfc/nfcmrvl/main.c @@ -124,12 +124,13 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy, memcpy(&priv->config, pdata, sizeof(*pdata)); if (priv->config.reset_n_io) { - rc = devm_gpio_request_one(dev, - priv->config.reset_n_io, - GPIOF_OUT_INIT_LOW, - "nfcmrvl_reset_n"); - if (rc < 0) + rc = gpio_request_one(priv->config.reset_n_io, + GPIOF_OUT_INIT_LOW, + "nfcmrvl_reset_n"); + if (rc < 0) { + priv->config.reset_n_io = 0; nfc_err(dev, "failed to request reset_n io\n"); + } } if (phy == NFCMRVL_PHY_SPI) { @@ -154,7 +155,13 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy, if (!priv->ndev) { nfc_err(dev, "nci_allocate_device failed\n"); rc = -ENOMEM; - goto error; + goto error_free_gpio; + } + + rc = nfcmrvl_fw_dnld_init(priv); + if (rc) { + nfc_err(dev, "failed to initialize FW download %d\n", rc); + goto error_free_dev; } nci_set_drvdata(priv->ndev, priv); @@ -162,24 +169,22 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy, rc = nci_register_device(priv->ndev); if (rc) { nfc_err(dev, "nci_register_device failed %d\n", rc); - goto error_free_dev; + goto error_fw_dnld_deinit; } /* Ensure that controller is powered off */ nfcmrvl_chip_halt(priv); - rc = nfcmrvl_fw_dnld_init(priv); - if (rc) { - nfc_err(dev, "failed to initialize FW download %d\n", rc); - goto error_free_dev; - } - nfc_info(dev, "registered with nci successfully\n"); return priv; +error_fw_dnld_deinit: + nfcmrvl_fw_dnld_deinit(priv); error_free_dev: nci_free_device(priv->ndev); -error: +error_free_gpio: + if (priv->config.reset_n_io) + gpio_free(priv->config.reset_n_io); kfree(priv); return ERR_PTR(rc); } @@ -195,7 +200,7 @@ void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv) nfcmrvl_fw_dnld_deinit(priv); if (priv->config.reset_n_io) - devm_gpio_free(priv->dev, priv->config.reset_n_io); + gpio_free(priv->config.reset_n_io); nci_unregister_device(ndev); nci_free_device(ndev); diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c index 83a99e3..6c0c301 100644 --- a/drivers/nfc/nfcmrvl/uart.c +++ b/drivers/nfc/nfcmrvl/uart.c @@ -109,6 +109,7 @@ static int nfcmrvl_nci_uart_open(struct nci_uart *nu) struct nfcmrvl_private *priv; struct nfcmrvl_platform_data *pdata = NULL; struct nfcmrvl_platform_data config; + struct device *dev = nu->tty->dev; /* * Platform data cannot be used here since usually it is already used @@ -116,9 +117,8 @@ static int nfcmrvl_nci_uart_open(struct nci_uart *nu) * and check if DT entries were added. */ - if (nu->tty->dev->parent && nu->tty->dev->parent->of_node) - if (nfcmrvl_uart_parse_dt(nu->tty->dev->parent->of_node, - &config) == 0) + if (dev && dev->parent && dev->parent->of_node) + if (nfcmrvl_uart_parse_dt(dev->parent->of_node, &config) == 0) pdata = &config; if (!pdata) { @@ -131,7 +131,7 @@ static int nfcmrvl_nci_uart_open(struct nci_uart *nu) } priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_UART, nu, &uart_ops, - nu->tty->dev, pdata); + dev, pdata); if (IS_ERR(priv)) return PTR_ERR(priv); diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c index 2b2330b..073e4a4 100644 --- a/drivers/nfc/port100.c +++ b/drivers/nfc/port100.c @@ -725,23 +725,33 @@ static int port100_submit_urb_for_ack(struct port100 *dev, gfp_t flags) static int port100_send_ack(struct port100 *dev) { - int rc; + int rc = 0; mutex_lock(&dev->out_urb_lock); - init_completion(&dev->cmd_cancel_done); + /* + * If prior cancel is in-flight (dev->cmd_cancel == true), we + * can skip to send cancel. Then this will wait the prior + * cancel, or merged into the next cancel rarely if next + * cancel was started before waiting done. In any case, this + * will be waked up soon or later. + */ + if (!dev->cmd_cancel) { + reinit_completion(&dev->cmd_cancel_done); - usb_kill_urb(dev->out_urb); + usb_kill_urb(dev->out_urb); - dev->out_urb->transfer_buffer = ack_frame; - dev->out_urb->transfer_buffer_length = sizeof(ack_frame); - rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); + dev->out_urb->transfer_buffer = ack_frame; + dev->out_urb->transfer_buffer_length = sizeof(ack_frame); + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); - /* Set the cmd_cancel flag only if the URB has been successfully - * submitted. It will be reset by the out URB completion callback - * port100_send_complete(). - */ - dev->cmd_cancel = !rc; + /* + * Set the cmd_cancel flag only if the URB has been + * successfully submitted. It will be reset by the out + * URB completion callback port100_send_complete(). + */ + dev->cmd_cancel = !rc; + } mutex_unlock(&dev->out_urb_lock); @@ -928,8 +938,8 @@ static void port100_send_complete(struct urb *urb) struct port100 *dev = urb->context; if (dev->cmd_cancel) { + complete_all(&dev->cmd_cancel_done); dev->cmd_cancel = false; - complete(&dev->cmd_cancel_done); } switch (urb->status) { @@ -1543,6 +1553,7 @@ static int port100_probe(struct usb_interface *interface, PORT100_COMM_RF_HEAD_MAX_LEN; dev->skb_tailroom = PORT100_FRAME_TAIL_LEN; + init_completion(&dev->cmd_cancel_done); INIT_WORK(&dev->cmd_complete_work, port100_wq_cmd_complete); /* The first thing to do with the Port-100 is to set the command type |