summaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/host/pci-imx6.c137
-rw-r--r--drivers/pci/host/pci-layerscape.c1
-rw-r--r--drivers/pci/host/pcie-designware.c15
-rw-r--r--drivers/pci/host/pcie-rcar.c14
4 files changed, 69 insertions, 98 deletions
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index fe60096..bd3f7d0 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -202,6 +202,23 @@ static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
return 0;
}
+static void imx6_pcie_reset_phy(struct pcie_port *pp)
+{
+ u32 tmp;
+
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
+ tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
+
+ usleep_range(2000, 3000);
+
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
+ tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
+}
+
/* Added for PCI abort handling */
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
@@ -332,16 +349,30 @@ static int imx6_pcie_wait_for_link(struct pcie_port *pp)
{
unsigned int retries;
+ /*
+ * Test if the PHY reports that the link is up and also that the LTSSM
+ * training finished. There are three possible states of the link when
+ * this code is called:
+ * 1) The link is DOWN (unlikely)
+ * The link didn't come up yet for some reason. This usually means
+ * we have a real problem somewhere, if it happens with a peripheral
+ * connected. This state calls for inspection of the DEBUG registers.
+ * 2) The link is UP, but still in LTSSM training
+ * Wait for the training to finish, which should take a very short
+ * time. If the training does not finish, we have a problem and we
+ * need to inspect the DEBUG registers. If the training does finish,
+ * the link is up and operating correctly.
+ * 3) The link is UP and no longer in LTSSM training
+ * The link is up and operating correctly.
+ */
for (retries = 0; retries < 200; retries++) {
- if (dw_pcie_link_up(pp))
+ u32 reg = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
+ if ((reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP) &&
+ !(reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING))
return 0;
- usleep_range(100, 1000);
+ usleep_range(1000, 2000);
}
- dev_err(pp->dev, "phy link never came up\n");
- dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
- readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
- readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
return -EINVAL;
}
@@ -390,8 +421,10 @@ static int imx6_pcie_establish_link(struct pcie_port *pp)
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
ret = imx6_pcie_wait_for_link(pp);
- if (ret)
- return ret;
+ if (ret) {
+ dev_info(pp->dev, "Link never came up\n");
+ goto err_reset_phy;
+ }
/* Allow Gen2 mode after the link is up. */
tmp = readl(pp->dbi_base + PCIE_RC_LCR);
@@ -410,19 +443,28 @@ static int imx6_pcie_establish_link(struct pcie_port *pp)
ret = imx6_pcie_wait_for_speed_change(pp);
if (ret) {
dev_err(pp->dev, "Failed to bring link up!\n");
- return ret;
+ goto err_reset_phy;
}
/* Make sure link training is finished as well! */
ret = imx6_pcie_wait_for_link(pp);
if (ret) {
dev_err(pp->dev, "Failed to bring link up!\n");
- return ret;
+ goto err_reset_phy;
}
tmp = readl(pp->dbi_base + PCIE_RC_LCSR);
dev_dbg(pp->dev, "Link up, Gen=%i\n", (tmp >> 16) & 0xf);
+
return 0;
+
+err_reset_phy:
+ dev_dbg(pp->dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+ imx6_pcie_reset_phy(pp);
+
+ return ret;
}
static void imx6_pcie_host_init(struct pcie_port *pp)
@@ -441,81 +483,10 @@ static void imx6_pcie_host_init(struct pcie_port *pp)
dw_pcie_msi_init(pp);
}
-static void imx6_pcie_reset_phy(struct pcie_port *pp)
-{
- u32 tmp;
-
- pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
- tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
- PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
-
- usleep_range(2000, 3000);
-
- pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
- tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
- PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
-}
-
static int imx6_pcie_link_up(struct pcie_port *pp)
{
- u32 rc, debug_r0, rx_valid;
- int count = 5;
-
- /*
- * Test if the PHY reports that the link is up and also that the LTSSM
- * training finished. There are three possible states of the link when
- * this code is called:
- * 1) The link is DOWN (unlikely)
- * The link didn't come up yet for some reason. This usually means
- * we have a real problem somewhere. Reset the PHY and exit. This
- * state calls for inspection of the DEBUG registers.
- * 2) The link is UP, but still in LTSSM training
- * Wait for the training to finish, which should take a very short
- * time. If the training does not finish, we have a problem and we
- * need to inspect the DEBUG registers. If the training does finish,
- * the link is up and operating correctly.
- * 3) The link is UP and no longer in LTSSM training
- * The link is up and operating correctly.
- */
- while (1) {
- rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
- if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP))
- break;
- if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING))
- return 1;
- if (!count--)
- break;
- dev_dbg(pp->dev, "Link is up, but still in training\n");
- /*
- * Wait a little bit, then re-check if the link finished
- * the training.
- */
- usleep_range(1000, 2000);
- }
- /*
- * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
- * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
- * If (MAC/LTSSM.state == Recovery.RcvrLock)
- * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
- * to gen2 is stuck
- */
- pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
- debug_r0 = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0);
-
- if (rx_valid & PCIE_PHY_RX_ASIC_OUT_VALID)
- return 0;
-
- if ((debug_r0 & 0x3f) != 0x0d)
- return 0;
-
- dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
- dev_dbg(pp->dev, "debug_r0=%08x debug_r1=%08x\n", debug_r0, rc);
-
- imx6_pcie_reset_phy(pp);
-
- return 0;
+ return readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) &
+ PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
}
static struct pcie_host_ops imx6_pcie_host_ops = {
diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
index 3923bed..c40d8b2 100644
--- a/drivers/pci/host/pci-layerscape.c
+++ b/drivers/pci/host/pci-layerscape.c
@@ -203,6 +203,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
+ { .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
{ },
};
MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 2171682..f85f10d 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -517,6 +517,11 @@ int dw_pcie_host_init(struct pcie_port *pp)
if (pp->ops->host_init)
pp->ops->host_init(pp);
+ /*
+ * If the platform provides ->rd_other_conf, it means the platform
+ * uses its own address translation component rather than ATU, so
+ * we should not program the ATU here.
+ */
if (!pp->ops->rd_other_conf)
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
PCIE_ATU_TYPE_MEM, pp->mem_base,
@@ -551,13 +556,11 @@ int dw_pcie_host_init(struct pcie_port *pp)
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
#endif
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
- }
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
pci_bus_add_devices(bus);
return 0;
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4edb518..3509218 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -390,9 +390,7 @@ static int rcar_pcie_enable(struct rcar_pcie *pcie)
rcar_pcie_setup(&res, pcie);
- /* Do not reassign resources if probe only */
- if (!pci_has_flag(PCI_PROBE_ONLY))
- pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
if (IS_ENABLED(CONFIG_PCI_MSI))
bus = pci_scan_root_bus_msi(pcie->dev, pcie->root_bus_nr,
@@ -408,13 +406,11 @@ static int rcar_pcie_enable(struct rcar_pcie *pcie)
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
- }
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
pci_bus_add_devices(bus);
generated by cgit v0.10.2 at 2024-07-23 22:32:07 (GMT)