diff options
Diffstat (limited to 'drivers/pci')
| -rw-r--r-- | drivers/pci/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/pci/bus.c | 1 | ||||
| -rw-r--r-- | drivers/pci/ecam.c | 6 | ||||
| -rw-r--r-- | drivers/pci/ecam.h | 67 | ||||
| -rw-r--r-- | drivers/pci/host/Kconfig | 29 | ||||
| -rw-r--r-- | drivers/pci/host/pci-host-common.c | 3 | ||||
| -rw-r--r-- | drivers/pci/host/pci-host-generic.c | 3 | ||||
| -rw-r--r-- | drivers/pci/host/pci-thunder-ecam.c | 3 | ||||
| -rw-r--r-- | drivers/pci/host/pci-thunder-pem.c | 6 | ||||
| -rw-r--r-- | drivers/pci/hotplug/acpiphp_glue.c | 4 | ||||
| -rw-r--r-- | drivers/pci/hotplug/pciehp_hpc.c | 4 | ||||
| -rw-r--r-- | drivers/pci/pci-driver.c | 5 | ||||
| -rw-r--r-- | drivers/pci/pci-sysfs.c | 5 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 215 | ||||
| -rw-r--r-- | drivers/pci/pci.h | 11 | ||||
| -rw-r--r-- | drivers/pci/pcie/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/pci/pcie/pcie-dpc.c | 19 | ||||
| -rw-r--r-- | drivers/pci/pcie/portdrv_core.c | 3 | ||||
| -rw-r--r-- | drivers/pci/pcie/portdrv_pci.c | 52 | ||||
| -rw-r--r-- | drivers/pci/probe.c | 22 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 17 | ||||
| -rw-r--r-- | drivers/pci/remove.c | 2 |
22 files changed, 363 insertions, 121 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 56389be..67f9916 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -25,7 +25,7 @@ config PCI_MSI If you don't know what to do here, say Y. config PCI_MSI_IRQ_DOMAIN - bool + def_bool ARM || ARM64 || X86 depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index dd7cdbe..2873136 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -291,6 +291,7 @@ void pci_bus_add_device(struct pci_dev *dev) pci_fixup_device(pci_fixup_final, dev); pci_create_sysfs_dev_files(dev); pci_proc_attach_device(dev); + pci_bridge_d3_device_changed(dev); dev->match_driver = true; retval = device_attach(&dev->dev); diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c index f9832ad..66e0d71 100644 --- a/drivers/pci/ecam.c +++ b/drivers/pci/ecam.c @@ -19,10 +19,9 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pci-ecam.h> #include <linux/slab.h> -#include "ecam.h" - /* * On 64-bit systems, we do a single ioremap for the whole config space * since we have enough virtual address range available. On 32-bit, we @@ -52,6 +51,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev, if (!cfg) return ERR_PTR(-ENOMEM); + cfg->parent = dev; cfg->ops = ops; cfg->busr.start = busr->start; cfg->busr.end = busr->end; @@ -95,7 +95,7 @@ struct pci_config_window *pci_ecam_create(struct device *dev, } if (ops->init) { - err = ops->init(dev, cfg); + err = ops->init(cfg); if (err) goto err_exit; } diff --git a/drivers/pci/ecam.h b/drivers/pci/ecam.h deleted file mode 100644 index 9878beb..0000000 --- a/drivers/pci/ecam.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2016 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation (the "GPL"). - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License version 2 (GPLv2) for more details. - * - * You should have received a copy of the GNU General Public License - * version 2 (GPLv2) along with this source code. - */ -#ifndef DRIVERS_PCI_ECAM_H -#define DRIVERS_PCI_ECAM_H - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -/* - * struct to hold pci ops and bus shift of the config window - * for a PCI controller. - */ -struct pci_config_window; -struct pci_ecam_ops { - unsigned int bus_shift; - struct pci_ops pci_ops; - int (*init)(struct device *, - struct pci_config_window *); -}; - -/* - * struct to hold the mappings of a config space window. This - * is expected to be used as sysdata for PCI controllers that - * use ECAM. - */ -struct pci_config_window { - struct resource res; - struct resource busr; - void *priv; - struct pci_ecam_ops *ops; - union { - void __iomem *win; /* 64-bit single mapping */ - void __iomem **winp; /* 32-bit per-bus mapping */ - }; -}; - -/* create and free pci_config_window */ -struct pci_config_window *pci_ecam_create(struct device *dev, - struct resource *cfgres, struct resource *busr, - struct pci_ecam_ops *ops); -void pci_ecam_free(struct pci_config_window *cfg); - -/* map_bus when ->sysdata is an instance of pci_config_window */ -void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn, - int where); -/* default ECAM ops */ -extern struct pci_ecam_ops pci_generic_ecam_ops; - -#ifdef CONFIG_PCI_HOST_GENERIC -/* for DT-based PCI controllers that support ECAM */ -int pci_host_common_probe(struct platform_device *pdev, - struct pci_ecam_ops *ops); -#endif -#endif diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 5d2374e..80cfe2f 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -3,8 +3,9 @@ menu "PCI host controller drivers" config PCI_DRA7XX bool "TI DRA7xx PCIe controller" - select PCIE_DW depends on OF && HAS_IOMEM && TI_PIPE3 + depends on PCI_MSI_IRQ_DOMAIN + select PCIE_DW help Enables support for the PCIe controller in the DRA7xx SoC. There are two instances of PCIe controller in DRA7xx. This controller can @@ -20,7 +21,7 @@ config PCI_MVEBU config PCIE_XILINX_NWL bool "NWL PCIe Core" depends on ARCH_ZYNQMP - select PCI_MSI_IRQ_DOMAIN if PCI_MSI + depends on PCI_MSI_IRQ_DOMAIN help Say 'Y' here if you want kernel support for Xilinx NWL PCIe controller. The controller can act as Root Port @@ -29,6 +30,7 @@ config PCIE_XILINX_NWL config PCIE_DW_PLAT bool "Platform bus based DesignWare PCIe Controller" + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW ---help--- This selects the DesignWare PCIe controller support. Select this if @@ -40,16 +42,19 @@ config PCIE_DW_PLAT config PCIE_DW bool + depends on PCI_MSI_IRQ_DOMAIN config PCI_EXYNOS bool "Samsung Exynos PCIe controller" depends on SOC_EXYNOS5440 + depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW config PCI_IMX6 bool "Freescale i.MX6 PCIe controller" depends on SOC_IMX6Q + depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW @@ -72,8 +77,7 @@ config PCI_RCAR_GEN2 config PCIE_RCAR bool "Renesas R-Car PCIe controller" depends on ARCH_RENESAS || (ARM && COMPILE_TEST) - select PCI_MSI - select PCI_MSI_IRQ_DOMAIN + depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want PCIe controller support on R-Car SoCs. @@ -92,6 +96,7 @@ config PCI_HOST_GENERIC config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" depends on ARCH_SPEAR13XX + depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW help @@ -100,6 +105,7 @@ config PCIE_SPEAR13XX config PCI_KEYSTONE bool "TI Keystone PCIe controller" depends on ARCH_KEYSTONE + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW select PCIEPORTBUS help @@ -120,7 +126,6 @@ config PCI_XGENE depends on ARCH_XGENE depends on OF select PCIEPORTBUS - select PCI_MSI_IRQ_DOMAIN if PCI_MSI help Say Y here if you want internal PCI support on APM X-Gene SoC. There are 5 internal PCIe ports available. Each port is GEN3 capable @@ -128,7 +133,8 @@ config PCI_XGENE config PCI_XGENE_MSI bool "X-Gene v1 PCIe MSI feature" - depends on PCI_XGENE && PCI_MSI + depends on PCI_XGENE + depends on PCI_MSI_IRQ_DOMAIN default y help Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC. @@ -137,6 +143,7 @@ config PCI_XGENE_MSI config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" depends on OF && (ARM || ARCH_LAYERSCAPE) + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW select MFD_SYSCON help @@ -177,8 +184,7 @@ config PCIE_IPROC_BCMA config PCIE_IPROC_MSI bool "Broadcom iProc PCIe MSI support" depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA - depends on PCI_MSI - select PCI_MSI_IRQ_DOMAIN + depends on PCI_MSI_IRQ_DOMAIN default ARCH_BCM_IPROC help Say Y here if you want to enable MSI support for Broadcom's iProc @@ -195,8 +201,8 @@ config PCIE_ALTERA config PCIE_ALTERA_MSI bool "Altera PCIe MSI feature" - depends on PCIE_ALTERA && PCI_MSI - select PCI_MSI_IRQ_DOMAIN + depends on PCIE_ALTERA + depends on PCI_MSI_IRQ_DOMAIN help Say Y here if you want PCIe MSI support for the Altera FPGA. This MSI driver supports Altera MSI to GIC controller IP. @@ -204,6 +210,7 @@ config PCIE_ALTERA_MSI config PCI_HISI depends on OF && ARM64 bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" + depends on PCI_MSI_IRQ_DOMAIN select PCIEPORTBUS select PCIE_DW help @@ -213,6 +220,7 @@ config PCI_HISI config PCIE_QCOM bool "Qualcomm PCIe controller" depends on ARCH_QCOM && OF + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW select PCIEPORTBUS help @@ -237,6 +245,7 @@ config PCI_HOST_THUNDER_ECAM config PCIE_ARMADA_8K bool "Marvell Armada-8K PCIe controller" depends on ARCH_MVEBU + depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW select PCIEPORTBUS help diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c index 8cba7ab..c18b9e3 100644 --- a/drivers/pci/host/pci-host-common.c +++ b/drivers/pci/host/pci-host-common.c @@ -20,10 +20,9 @@ #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_pci.h> +#include <linux/pci-ecam.h> #include <linux/platform_device.h> -#include "../ecam.h" - static int gen_pci_parse_request_of_pci_ranges(struct device *dev, struct list_head *resources, struct resource **bus_range) { diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c index 6eaceab..f0ca6de 100644 --- a/drivers/pci/host/pci-host-generic.c +++ b/drivers/pci/host/pci-host-generic.c @@ -23,10 +23,9 @@ #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_pci.h> +#include <linux/pci-ecam.h> #include <linux/platform_device.h> -#include "../ecam.h" - static struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = { .bus_shift = 16, .pci_ops = { diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c index 540d030..a9fc1c9 100644 --- a/drivers/pci/host/pci-thunder-ecam.c +++ b/drivers/pci/host/pci-thunder-ecam.c @@ -11,10 +11,9 @@ #include <linux/ioport.h> #include <linux/of_pci.h> #include <linux/of.h> +#include <linux/pci-ecam.h> #include <linux/platform_device.h> -#include "../ecam.h" - static void set_val(u32 v, int where, int size, u32 *val) { int shift = (where & 3) * 8; diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c index 9b8ab94..91f6fc6 100644 --- a/drivers/pci/host/pci-thunder-pem.c +++ b/drivers/pci/host/pci-thunder-pem.c @@ -18,10 +18,9 @@ #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_pci.h> +#include <linux/pci-ecam.h> #include <linux/platform_device.h> -#include "../ecam.h" - #define PEM_CFG_WR 0x28 #define PEM_CFG_RD 0x30 @@ -285,8 +284,9 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn, return pci_generic_config_write(bus, devfn, where, size, val); } -static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg) +static int thunder_pem_init(struct pci_config_window *cfg) { + struct device *dev = cfg->parent; resource_size_t bar4_start; struct resource *res_pem; struct thunder_pem_pci *pem_pci; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index fa49f91..6a33ddc 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -675,6 +675,8 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge) if (bridge->is_going_away) return; + pm_runtime_get_sync(&bridge->pci_dev->dev); + list_for_each_entry(slot, &bridge->slots, node) { struct pci_bus *bus = slot->bus; struct pci_dev *dev, *tmp; @@ -694,6 +696,8 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge) disable_slot(slot); } } + + pm_runtime_put(&bridge->pci_dev->dev); } /* diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 5c24e93..08e84d6 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -546,6 +546,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) u8 present; bool link; + /* Interrupts cannot originate from a controller that's asleep */ + if (pdev->current_state == PCI_D3cold) + return IRQ_NONE; + /* * In order to guarantee that all interrupt events are * serviced, we need to re-inspect Slot Status register after diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index d7ffd66..e39a67c 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -777,7 +777,7 @@ static int pci_pm_suspend_noirq(struct device *dev) if (!pci_dev->state_saved) { pci_save_state(pci_dev); - if (!pci_has_subordinate(pci_dev)) + if (pci_power_manageable(pci_dev)) pci_prepare_to_sleep(pci_dev); } @@ -1144,7 +1144,6 @@ static int pci_pm_runtime_suspend(struct device *dev) return -ENOSYS; pci_dev->state_saved = false; - pci_dev->no_d3cold = false; error = pm->runtime_suspend(dev); if (error) { /* @@ -1161,8 +1160,6 @@ static int pci_pm_runtime_suspend(struct device *dev) return error; } - if (!pci_dev->d3cold_allowed) - pci_dev->no_d3cold = true; pci_fixup_device(pci_fixup_suspend, pci_dev); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index d319a9c..bcd10c7 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -406,6 +406,11 @@ static ssize_t d3cold_allowed_store(struct device *dev, return -EINVAL; pdev->d3cold_allowed = !!val; + if (pdev->d3cold_allowed) + pci_d3cold_enable(pdev); + else + pci_d3cold_disable(pdev); + pm_runtime_resume(dev); return count; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c8b4dbd..14d24b4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -7,8 +7,10 @@ * Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz> */ +#include <linux/acpi.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/init.h> #include <linux/of.h> #include <linux/of_pci.h> @@ -25,7 +27,9 @@ #include <linux/device.h> #include <linux/pm_runtime.h> #include <linux/pci_hotplug.h> +#include <linux/vmalloc.h> #include <asm/setup.h> +#include <asm/dma.h> #include <linux/aer.h> #include "pci.h" @@ -81,6 +85,9 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; +#define DEFAULT_HOTPLUG_BUS_SIZE 1 +unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; + enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT; /* @@ -101,6 +108,21 @@ unsigned int pcibios_max_latency = 255; /* If set, the PCIe ARI capability will not be used. */ static bool pcie_ari_disabled; +/* Disable bridge_d3 for all PCIe ports */ +static bool pci_bridge_d3_disable; +/* Force bridge_d3 for all PCIe ports */ +static bool pci_bridge_d3_force; + +static int __init pcie_port_pm_setup(char *str) +{ + if (!strcmp(str, "off")) + pci_bridge_d3_disable = true; + else if (!strcmp(str, "force")) + pci_bridge_d3_force = true; + return 1; +} +__setup("pcie_port_pm=", pcie_port_pm_setup); + /** * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children * @bus: pointer to PCI bus structure to search @@ -2156,6 +2178,164 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev) } /** + * pci_bridge_d3_possible - Is it possible to put the bridge into D3 + * @bridge: Bridge to check + * + * This function checks if it is possible to move the bridge to D3. + * Currently we only allow D3 for recent enough PCIe ports. + */ +static bool pci_bridge_d3_possible(struct pci_dev *bridge) +{ + unsigned int year; + + if (!pci_is_pcie(bridge)) + return false; + + switch (pci_pcie_type(bridge)) { + case PCI_EXP_TYPE_ROOT_PORT: + case PCI_EXP_TYPE_UPSTREAM: + case PCI_EXP_TYPE_DOWNSTREAM: + if (pci_bridge_d3_disable) + return false; + if (pci_bridge_d3_force) + return true; + + /* + * It should be safe to put PCIe ports from 2015 or newer + * to D3. + */ + if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && + year >= 2015) { + return true; + } + break; + } + + return false; +} + +static int pci_dev_check_d3cold(struct pci_dev *dev, void *data) +{ + bool *d3cold_ok = data; + bool no_d3cold; + + /* + * The device needs to be allowed to go D3cold and if it is wake + * capable to do so from D3cold. + */ + no_d3cold = dev->no_d3cold || !dev->d3cold_allowed || + (device_may_wakeup(&dev->dev) && !pci_pme_capable(dev, PCI_D3cold)) || + !pci_power_manageable(dev); + + *d3cold_ok = !no_d3cold; + + return no_d3cold; +} + +/* + * pci_bridge_d3_update - Update bridge D3 capabilities + * @dev: PCI device which is changed + * @remove: Is the device being removed + * + * Update upstream bridge PM capabilities accordingly depending on if the + * device PM configuration was changed or the device is being removed. The + * change is also propagated upstream. + */ +static void pci_bridge_d3_update(struct pci_dev *dev, bool remove) +{ + struct pci_dev *bridge; + bool d3cold_ok = true; + + bridge = pci_upstream_bridge(dev); + if (!bridge || !pci_bridge_d3_possible(bridge)) + return; + + pci_dev_get(bridge); + /* + * If the device is removed we do not care about its D3cold + * capabilities. + */ + if (!remove) + pci_dev_check_d3cold(dev, &d3cold_ok); + + if (d3cold_ok) { + /* + * We need to go through all children to find out if all of + * them can still go to D3cold. + */ + pci_walk_bus(bridge->subordinate, pci_dev_check_d3cold, + &d3cold_ok); + } + + if (bridge->bridge_d3 != d3cold_ok) { + bridge->bridge_d3 = d3cold_ok; + /* Propagate change to upstream bridges */ + pci_bridge_d3_update(bridge, false); + } + + pci_dev_put(bridge); +} + +/** + * pci_bridge_d3_device_changed - Update bridge D3 capabilities on change + * @dev: PCI device that was changed + * + * If a device is added or its PM configuration, such as is it allowed to + * enter D3cold, is changed this function updates upstream bridge PM + * capabilities accordingly. + */ +void pci_bridge_d3_device_changed(struct pci_dev *dev) +{ + pci_bridge_d3_update(dev, false); +} + +/** + * pci_bridge_d3_device_removed - Update bridge D3 capabilities on remove + * @dev: PCI device being removed + * + * Function updates upstream bridge PM capabilities based on other devices + * still left on the bus. + */ +void pci_bridge_d3_device_removed(struct pci_dev *dev) +{ + pci_bridge_d3_update(dev, true); +} + +/** + * pci_d3cold_enable - Enable D3cold for device + * @dev: PCI device to handle + * + * This function can be used in drivers to enable D3cold from the device + * they handle. It also updates upstream PCI bridge PM capabilities + * accordingly. + */ +void pci_d3cold_enable(struct pci_dev *dev) +{ + if (dev->no_d3cold) { + dev->no_d3cold = false; + pci_bridge_d3_device_changed(dev); + } +} +EXPORT_SYMBOL_GPL(pci_d3cold_enable); + +/** + * pci_d3cold_disable - Disable D3cold for device + * @dev: PCI device to handle + * + * This function can be used in drivers to disable D3cold from the device + * they handle. It also updates upstream PCI bridge PM capabilities + * accordingly. + */ +void pci_d3cold_disable(struct pci_dev *dev) +{ + if (!dev->no_d3cold) { + dev->no_d3cold = true; + pci_bridge_d3_device_changed(dev); + } +} +EXPORT_SYMBOL_GPL(pci_d3cold_disable); + +/** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. */ @@ -2189,6 +2369,7 @@ void pci_pm_init(struct pci_dev *dev) dev->pm_cap = pm; dev->d3_delay = PCI_PM_D3_WAIT; dev->d3cold_delay = PCI_PM_D3COLD_WAIT; + dev->bridge_d3 = pci_bridge_d3_possible(dev); dev->d3cold_allowed = true; dev->d1_support = false; @@ -3165,6 +3346,23 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) #endif } +/** + * pci_unmap_iospace - Unmap the memory mapped I/O space + * @res: resource to be unmapped + * + * Unmap the CPU virtual address @res from virtual address space. + * Only architectures that have memory mapped IO functions defined + * (and the PCI_IOBASE value defined) should call this function. + */ +void pci_unmap_iospace(struct resource *res) +{ +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; + + unmap_kernel_range(vaddr, resource_size(res)); +#endif +} + static void __pci_set_master(struct pci_dev *dev, bool enable) { u16 old_cmd, cmd; @@ -4897,7 +5095,7 @@ static ssize_t pci_resource_alignment_store(struct bus_type *bus, return pci_set_resource_alignment_param(buf, count); } -BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show, +static BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show, pci_resource_alignment_store); static int __init pci_resource_alignment_sysfs_init(void) @@ -4923,7 +5121,7 @@ int pci_get_new_domain_nr(void) } #ifdef CONFIG_PCI_DOMAINS_GENERIC -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) +static int of_pci_bus_find_domain_nr(struct device *parent) { static int use_dt_domains = -1; int domain = -1; @@ -4967,7 +5165,13 @@ void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) domain = -1; } - bus->domain_nr = domain; + return domain; +} + +int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent) +{ + return acpi_disabled ? of_pci_bus_find_domain_nr(parent) : + acpi_pci_bus_find_domain_nr(bus); } #endif #endif @@ -5021,6 +5225,11 @@ static int __init pci_setup(char *str) pci_hotplug_io_size = memparse(str + 9, &str); } else if (!strncmp(str, "hpmemsize=", 10)) { pci_hotplug_mem_size = memparse(str + 10, &str); + } else if (!strncmp(str, "hpbussize=", 10)) { + pci_hotplug_bus_size = + simple_strtoul(str + 10, &str, 0); + if (pci_hotplug_bus_size > 0xff) + pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; } else if (!strncmp(str, "pcie_bus_tune_off", 17)) { pcie_bus_config = PCIE_BUS_TUNE_OFF; } else if (!strncmp(str, "pcie_bus_safe", 13)) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index a814bbb..9730c47 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -82,6 +82,8 @@ void pci_pm_init(struct pci_dev *dev); void pci_ea_init(struct pci_dev *dev); void pci_allocate_cap_save_buffers(struct pci_dev *dev); void pci_free_cap_save_buffers(struct pci_dev *dev); +void pci_bridge_d3_device_changed(struct pci_dev *dev); +void pci_bridge_d3_device_removed(struct pci_dev *dev); static inline void pci_wakeup_event(struct pci_dev *dev) { @@ -94,6 +96,15 @@ static inline bool pci_has_subordinate(struct pci_dev *pci_dev) return !!(pci_dev->subordinate); } +static inline bool pci_power_manageable(struct pci_dev *pci_dev) +{ + /* + * Currently we allow normal PCI devices and PCI bridges transition + * into D3 if their bridge_d3 is set. + */ + return !pci_has_subordinate(pci_dev) || pci_dev->bridge_d3; +} + struct pci_vpd_ops { ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf); ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf); diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 22ca641..7fcea75 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -83,7 +83,7 @@ config PCIE_PME depends on PCIEPORTBUS && PM config PCIE_DPC - tristate "PCIe Downstream Port Containment support" + bool "PCIe Downstream Port Containment support" depends on PCIEPORTBUS default n help @@ -92,6 +92,3 @@ config PCIE_DPC will be handled by the DPC driver. If your system doesn't have this capability or you do not want to use this feature, it is safe to answer N. - - To compile this driver as a module, choose M here: the module - will be called pcie-dpc. diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c index ab552f1..250f878 100644 --- a/drivers/pci/pcie/pcie-dpc.c +++ b/drivers/pci/pcie/pcie-dpc.c @@ -15,8 +15,8 @@ struct dpc_dev { struct pcie_device *dev; - struct work_struct work; - int cap_pos; + struct work_struct work; + int cap_pos; }; static void dpc_wait_link_inactive(struct pci_dev *pdev) @@ -89,7 +89,7 @@ static int dpc_probe(struct pcie_device *dev) int status; u16 ctl, cap; - dpc = kzalloc(sizeof(*dpc), GFP_KERNEL); + dpc = devm_kzalloc(&dev->device, sizeof(*dpc), GFP_KERNEL); if (!dpc) return -ENOMEM; @@ -98,11 +98,12 @@ static int dpc_probe(struct pcie_device *dev) INIT_WORK(&dpc->work, interrupt_event_handler); set_service_data(dev, dpc); - status = request_irq(dev->irq, dpc_irq, IRQF_SHARED, "pcie-dpc", dpc); + status = devm_request_irq(&dev->device, dev->irq, dpc_irq, IRQF_SHARED, + "pcie-dpc", dpc); if (status) { dev_warn(&dev->device, "request IRQ%d failed: %d\n", dev->irq, status); - goto out; + return status; } pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap); @@ -117,9 +118,6 @@ static int dpc_probe(struct pcie_device *dev) FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), (cap >> 8) & 0xf, FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE)); return status; - out: - kfree(dpc); - return status; } static void dpc_remove(struct pcie_device *dev) @@ -131,14 +129,11 @@ static void dpc_remove(struct pcie_device *dev) pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl); ctl &= ~(PCI_EXP_DPC_CTL_EN_NONFATAL | PCI_EXP_DPC_CTL_INT_EN); pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl); - - free_irq(dev->irq, dpc); - kfree(dpc); } static struct pcie_port_service_driver dpcdriver = { .name = "dpc", - .port_type = PCI_EXP_TYPE_ROOT_PORT | PCI_EXP_TYPE_DOWNSTREAM, + .port_type = PCIE_ANY_PORT, .service = PCIE_PORT_SERVICE_DPC, .probe = dpc_probe, .remove = dpc_remove, diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 32d4d0a..e9270b4 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/pcieport_if.h> @@ -342,6 +343,8 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq) return retval; } + pm_runtime_no_callbacks(device); + return 0; } diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index be35da2..70d7ad8 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -93,6 +93,26 @@ static int pcie_port_resume_noirq(struct device *dev) return 0; } +static int pcie_port_runtime_suspend(struct device *dev) +{ + return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY; +} + +static int pcie_port_runtime_resume(struct device *dev) +{ + return 0; +} + +static int pcie_port_runtime_idle(struct device *dev) +{ + /* + * Assume the PCI core has set bridge_d3 whenever it thinks the port + * should be good to go to D3. Everything else, including moving + * the port to D3, is handled by the PCI core. + */ + return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY; +} + static const struct dev_pm_ops pcie_portdrv_pm_ops = { .suspend = pcie_port_device_suspend, .resume = pcie_port_device_resume, @@ -101,6 +121,9 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { .poweroff = pcie_port_device_suspend, .restore = pcie_port_device_resume, .resume_noirq = pcie_port_resume_noirq, + .runtime_suspend = pcie_port_runtime_suspend, + .runtime_resume = pcie_port_runtime_resume, + .runtime_idle = pcie_port_runtime_idle, }; #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) @@ -134,16 +157,39 @@ static int pcie_portdrv_probe(struct pci_dev *dev, return status; pci_save_state(dev); + /* - * D3cold may not work properly on some PCIe port, so disable - * it by default. + * Prevent runtime PM if the port is advertising support for PCIe + * hotplug. Otherwise the BIOS hotplug SMI code might not be able + * to enumerate devices behind this port properly (the port is + * powered down preventing all config space accesses to the + * subordinate devices). We can't be sure for native PCIe hotplug + * either so prevent that as well. */ - dev->d3cold_allowed = false; + if (!dev->is_hotplug_bridge) { + /* + * Keep the port resumed 100ms to make sure things like + * config space accesses from userspace (lspci) will not + * cause the port to repeatedly suspend and resume. + */ + pm_runtime_set_autosuspend_delay(&dev->dev, 100); + pm_runtime_use_autosuspend(&dev->dev); + pm_runtime_mark_last_busy(&dev->dev); + pm_runtime_put_autosuspend(&dev->dev); + pm_runtime_allow(&dev->dev); + } + return 0; } static void pcie_portdrv_remove(struct pci_dev *dev) { + if (!dev->is_hotplug_bridge) { + pm_runtime_forbid(&dev->dev); + pm_runtime_get_noresume(&dev->dev); + pm_runtime_dont_use_autosuspend(&dev->dev); + } + pcie_port_device_remove(dev); } diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 8e3ef72..93f280d 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -16,6 +16,7 @@ #include <linux/aer.h> #include <linux/acpi.h> #include <linux/irqdomain.h> +#include <linux/pm_runtime.h> #include "pci.h" #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */ @@ -832,6 +833,12 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) u8 primary, secondary, subordinate; int broken = 0; + /* + * Make sure the bridge is powered on to be able to access config + * space of devices below it. + */ + pm_runtime_get_sync(&dev->dev); + pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); primary = buses & 0xFF; secondary = (buses >> 8) & 0xFF; @@ -1012,6 +1019,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) out: pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); + pm_runtime_put(&dev->dev); + return max; } EXPORT_SYMBOL(pci_scan_bridge); @@ -2077,6 +2086,15 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus) } /* + * Make sure a hotplug bridge has at least the minimum requested + * number of buses. + */ + if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) { + if (max - bus->busn_res.start < pci_hotplug_bus_size - 1) + max = bus->busn_res.start + pci_hotplug_bus_size - 1; + } + + /* * We've scanned the bus and so we know all about what's on * the other side of any bridges that may be on this bus plus * any devices. @@ -2127,7 +2145,9 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, b->sysdata = sysdata; b->ops = ops; b->number = b->busn_res.start = bus; - pci_bus_assign_domain_nr(b, parent); +#ifdef CONFIG_PCI_DOMAINS_GENERIC + b->domain_nr = pci_bus_find_domain_nr(b, parent); +#endif b2 = pci_find_bus(pci_domain_nr(b), bus); if (b2) { /* If we already got to this bus through a different bridge, ignore it */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index ee72ebe..37ff015 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3189,13 +3189,15 @@ static void quirk_no_bus_reset(struct pci_dev *dev) } /* - * Atheros AR93xx chips do not behave after a bus reset. The device will - * throw a Link Down error on AER-capable systems and regardless of AER, - * config space of the device is never accessible again and typically - * causes the system to hang or reset when access is attempted. + * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset. + * The device will throw a Link Down error on AER-capable systems and + * regardless of AER, config space of the device is never accessible again + * and typically causes the system to hang or reset when access is attempted. * http://www.spinics.net/lists/linux-pci/msg34797.html */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset); static void quirk_no_pm_reset(struct pci_dev *dev) { @@ -3711,6 +3713,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182, + quirk_dma_func1_alias); /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, quirk_dma_func1_alias); @@ -3747,6 +3752,9 @@ static const struct pci_device_id fixed_dma_alias_tbl[] = { { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ .driver_data = PCI_DEVFN(1, 0) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, + PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */ + .driver_data = PCI_DEVFN(1, 0) }, { 0 } }; @@ -4087,6 +4095,7 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 8982026..d1ef7ac 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -96,6 +96,8 @@ static void pci_remove_bus_device(struct pci_dev *dev) dev->subordinate = NULL; } + pci_bridge_d3_device_removed(dev); + pci_destroy_dev(dev); } |