diff options
Diffstat (limited to 'drivers/scsi/aic7xxx/aic7xxx_pci.c')
-rw-r--r-- | drivers/scsi/aic7xxx/aic7xxx_pci.c | 74 |
1 files changed, 37 insertions, 37 deletions
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c index 27014b9..2b11a42 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c @@ -752,7 +752,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry) if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) { if (bootverbose) - printf("%s: Enabling 39Bit Addressing\n", + printk("%s: Enabling 39Bit Addressing\n", ahc_name(ahc)); devconfig |= DACEN; } @@ -896,7 +896,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry) /* See if someone else set us up already */ if ((ahc->flags & AHC_NO_BIOS_INIT) == 0 && scsiseq != 0) { - printf("%s: Using left over BIOS settings\n", + printk("%s: Using left over BIOS settings\n", ahc_name(ahc)); ahc->flags &= ~AHC_USEDEFAULTS; ahc->flags |= AHC_BIOS_ENABLED; @@ -1155,7 +1155,7 @@ done: ahc_outb(ahc, CLRINT, CLRPARERR); ahc_outb(ahc, CLRINT, CLRBRKADRINT); if (bootverbose && enable) { - printf("%s: External SRAM, %s access%s, %dbytes/SCB\n", + printk("%s: External SRAM, %s access%s, %dbytes/SCB\n", ahc_name(ahc), fast ? "fast" : "slow", pcheck ? ", parity checking enabled" : "", large ? 64 : 32); @@ -1292,7 +1292,7 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1) if (have_seeprom) { if (bootverbose) - printf("%s: Reading SEEPROM...", ahc_name(ahc)); + printk("%s: Reading SEEPROM...", ahc_name(ahc)); for (;;) { u_int start_addr; @@ -1309,9 +1309,9 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1) if (have_seeprom != 0 || sd.sd_chip == C56_66) { if (bootverbose) { if (have_seeprom == 0) - printf ("checksum error\n"); + printk ("checksum error\n"); else - printf ("done.\n"); + printk ("done.\n"); } break; } @@ -1362,9 +1362,9 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1) if (!have_seeprom) { if (bootverbose) - printf("%s: No SEEPROM available.\n", ahc_name(ahc)); + printk("%s: No SEEPROM available.\n", ahc_name(ahc)); ahc->flags |= AHC_USEDEFAULTS; - free(ahc->seep_config, M_DEVBUF); + kfree(ahc->seep_config); ahc->seep_config = NULL; sc = NULL; } else { @@ -1399,7 +1399,7 @@ check_extport(struct ahc_softc *ahc, u_int *sxfrctl1) if ((sc->adapter_control & CFSTERM) != 0) *sxfrctl1 |= STPWEN; if (bootverbose) - printf("%s: Low byte termination %sabled\n", + printk("%s: Low byte termination %sabled\n", ahc_name(ahc), (*sxfrctl1 & STPWEN) ? "en" : "dis"); } @@ -1569,7 +1569,7 @@ configure_termination(struct ahc_softc *ahc, &eeprom_present); if ((adapter_control & CFSEAUTOTERM) == 0) { if (bootverbose) - printf("%s: Manual SE Termination\n", + printk("%s: Manual SE Termination\n", ahc_name(ahc)); enableSEC_low = (adapter_control & CFSELOWTERM); enableSEC_high = @@ -1577,7 +1577,7 @@ configure_termination(struct ahc_softc *ahc, } if ((adapter_control & CFAUTOTERM) == 0) { if (bootverbose) - printf("%s: Manual LVD Termination\n", + printk("%s: Manual LVD Termination\n", ahc_name(ahc)); enablePRI_low = (adapter_control & CFSTERM); enablePRI_high = (adapter_control & CFWSTERM); @@ -1604,19 +1604,19 @@ configure_termination(struct ahc_softc *ahc, if (bootverbose && (ahc->features & AHC_ULTRA2) == 0) { - printf("%s: internal 50 cable %s present", + printk("%s: internal 50 cable %s present", ahc_name(ahc), internal50_present ? "is":"not"); if ((ahc->features & AHC_WIDE) != 0) - printf(", internal 68 cable %s present", + printk(", internal 68 cable %s present", internal68_present ? "is":"not"); - printf("\n%s: external cable %s present\n", + printk("\n%s: external cable %s present\n", ahc_name(ahc), externalcable_present ? "is":"not"); } if (bootverbose) - printf("%s: BIOS eeprom %s present\n", + printk("%s: BIOS eeprom %s present\n", ahc_name(ahc), eeprom_present ? "is" : "not"); if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) { @@ -1642,7 +1642,7 @@ configure_termination(struct ahc_softc *ahc, && (internal50_present != 0) && (internal68_present != 0) && (externalcable_present != 0)) { - printf("%s: Illegal cable configuration!!. " + printk("%s: Illegal cable configuration!!. " "Only two connectors on the " "adapter may be used at a " "time!\n", ahc_name(ahc)); @@ -1664,10 +1664,10 @@ configure_termination(struct ahc_softc *ahc, brddat |= BRDDAT6; if (bootverbose) { if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) - printf("%s: 68 pin termination " + printk("%s: 68 pin termination " "Enabled\n", ahc_name(ahc)); else - printf("%s: %sHigh byte termination " + printk("%s: %sHigh byte termination " "Enabled\n", ahc_name(ahc), enableSEC_high ? "Secondary " : ""); @@ -1683,10 +1683,10 @@ configure_termination(struct ahc_softc *ahc, *sxfrctl1 |= STPWEN; if (bootverbose) { if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) - printf("%s: 50 pin termination " + printk("%s: 50 pin termination " "Enabled\n", ahc_name(ahc)); else - printf("%s: %sLow byte termination " + printk("%s: %sLow byte termination " "Enabled\n", ahc_name(ahc), enableSEC_low ? "Secondary " : ""); @@ -1696,7 +1696,7 @@ configure_termination(struct ahc_softc *ahc, if (enablePRI_low != 0) { *sxfrctl1 |= STPWEN; if (bootverbose) - printf("%s: Primary Low Byte termination " + printk("%s: Primary Low Byte termination " "Enabled\n", ahc_name(ahc)); } @@ -1709,7 +1709,7 @@ configure_termination(struct ahc_softc *ahc, if (enablePRI_high != 0) { brddat |= BRDDAT4; if (bootverbose) - printf("%s: Primary High Byte " + printk("%s: Primary High Byte " "termination Enabled\n", ahc_name(ahc)); } @@ -1721,7 +1721,7 @@ configure_termination(struct ahc_softc *ahc, *sxfrctl1 |= STPWEN; if (bootverbose) - printf("%s: %sLow byte termination Enabled\n", + printk("%s: %sLow byte termination Enabled\n", ahc_name(ahc), (ahc->features & AHC_ULTRA2) ? "Primary " : ""); @@ -1731,7 +1731,7 @@ configure_termination(struct ahc_softc *ahc, && (ahc->features & AHC_WIDE) != 0) { brddat |= BRDDAT6; if (bootverbose) - printf("%s: %sHigh byte termination Enabled\n", + printk("%s: %sHigh byte termination Enabled\n", ahc_name(ahc), (ahc->features & AHC_ULTRA2) ? "Secondary " : ""); @@ -1937,29 +1937,29 @@ ahc_pci_intr(struct ahc_softc *ahc) status1 = ahc_pci_read_config(ahc->dev_softc, PCIR_STATUS + 1, /*bytes*/1); - printf("%s: PCI error Interrupt at seqaddr = 0x%x\n", + printk("%s: PCI error Interrupt at seqaddr = 0x%x\n", ahc_name(ahc), ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8)); if (status1 & DPE) { ahc->pci_target_perr_count++; - printf("%s: Data Parity Error Detected during address " + printk("%s: Data Parity Error Detected during address " "or write data phase\n", ahc_name(ahc)); } if (status1 & SSE) { - printf("%s: Signal System Error Detected\n", ahc_name(ahc)); + printk("%s: Signal System Error Detected\n", ahc_name(ahc)); } if (status1 & RMA) { - printf("%s: Received a Master Abort\n", ahc_name(ahc)); + printk("%s: Received a Master Abort\n", ahc_name(ahc)); } if (status1 & RTA) { - printf("%s: Received a Target Abort\n", ahc_name(ahc)); + printk("%s: Received a Target Abort\n", ahc_name(ahc)); } if (status1 & STA) { - printf("%s: Signaled a Target Abort\n", ahc_name(ahc)); + printk("%s: Signaled a Target Abort\n", ahc_name(ahc)); } if (status1 & DPR) { - printf("%s: Data Parity Error has been reported via PERR#\n", + printk("%s: Data Parity Error has been reported via PERR#\n", ahc_name(ahc)); } @@ -1968,14 +1968,14 @@ ahc_pci_intr(struct ahc_softc *ahc) status1, /*bytes*/1); if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) { - printf("%s: Latched PCIERR interrupt with " + printk("%s: Latched PCIERR interrupt with " "no status bits set\n", ahc_name(ahc)); } else { ahc_outb(ahc, CLRINT, CLRPARERR); } if (ahc->pci_target_perr_count > AHC_PCI_TARGET_PERR_THRESH) { - printf( + printk( "%s: WARNING WARNING WARNING WARNING\n" "%s: Too many PCI parity errors observed as a target.\n" "%s: Some device on this bus is generating bad parity.\n" @@ -2386,7 +2386,7 @@ ahc_aha29160C_setup(struct ahc_softc *ahc) static int ahc_raid_setup(struct ahc_softc *ahc) { - printf("RAID functionality unsupported\n"); + printk("RAID functionality unsupported\n"); return (ENXIO); } @@ -2404,7 +2404,7 @@ ahc_aha394XX_setup(struct ahc_softc *ahc) ahc->channel = 'B'; break; default: - printf("adapter at unexpected slot %d\n" + printk("adapter at unexpected slot %d\n" "unable to map to a channel\n", ahc_get_pci_slot(pci)); ahc->channel = 'A'; @@ -2429,7 +2429,7 @@ ahc_aha398XX_setup(struct ahc_softc *ahc) ahc->channel = 'C'; break; default: - printf("adapter at unexpected slot %d\n" + printk("adapter at unexpected slot %d\n" "unable to map to a channel\n", ahc_get_pci_slot(pci)); ahc->channel = 'A'; @@ -2459,7 +2459,7 @@ ahc_aha494XX_setup(struct ahc_softc *ahc) ahc->channel = 'D'; break; default: - printf("adapter at unexpected slot %d\n" + printk("adapter at unexpected slot %d\n" "unable to map to a channel\n", ahc_get_pci_slot(pci)); ahc->channel = 'A'; |