1 files changed, 39 insertions, 12 deletions

diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 5c8d763..1af578d 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -133,20 +133,38 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
 {
 	struct bnx2i_5771x_cq_db *cq_db;
 	u16 cq_index;
+	u16 next_index;
+	u32 num_active_cmds;
 
+
+	/* Coalesce CQ entries only on 10G devices */
 	if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
 		return;
 
+	/* Do not update CQ DB multiple times before firmware writes
+	 * '0xFFFF' to CQDB->SQN field. Deviation may cause spurious
+	 * interrupts and other unwanted results
+	 */
+	cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+	if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF)
+		return;
+
 	if (action == CNIC_ARM_CQE) {
-		cq_index = ep->qp.cqe_exp_seq_sn +
-			   ep->num_active_cmds / event_coal_div;
-		cq_index %= (ep->qp.cqe_size * 2 + 1);
-		if (!cq_index) {
+		num_active_cmds = ep->num_active_cmds;
+		if (num_active_cmds <= event_coal_min)
+			next_index = 1;
+		else
+			next_index = event_coal_min +
+				(num_active_cmds - event_coal_min) / event_coal_div;
+		if (!next_index)
+			next_index = 1;
+		cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1;
+		if (cq_index > ep->qp.cqe_size * 2)
+			cq_index -= ep->qp.cqe_size * 2;
+		if (!cq_index)
 			cq_index = 1;
-			cq_db = (struct bnx2i_5771x_cq_db *)
-					ep->qp.cq_pgtbl_virt;
-			cq_db->sqn[0] = cq_index;
-		}
+
+		cq_db->sqn[0] = cq_index;
 	}
 }
 
@@ -366,6 +384,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 	struct bnx2i_cmd *bnx2i_cmd;
 	struct bnx2i_tmf_request *tmfabort_wqe;
 	u32 dword;
+	u32 scsi_lun[2];
 
 	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
 	tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
@@ -376,27 +395,35 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 	tmfabort_wqe->op_attr = 0;
 	tmfabort_wqe->op_attr =
 		ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
-	tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
-	tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
 
 	tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
 	tmfabort_wqe->reserved2 = 0;
 	tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
 
 	ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
-	if (!ctask || ctask->sc)
+	if (!ctask || !ctask->sc)
 		/*
 		 * the iscsi layer must have completed the cmd while this
 		 * was starting up.
+		 *
+		 * Note: In the case of a SCSI cmd timeout, the task's sc
+		 *       is still active; hence ctask->sc != 0
+		 *       In this case, the task must be aborted
 		 */
 		return 0;
+
 	ref_sc = ctask->sc;
 
+	/* Retrieve LUN directly from the ref_sc */
+	int_to_scsilun(ref_sc->device->lun, (struct scsi_lun *) scsi_lun);
+	tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]);
+	tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]);
+
 	if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
 		dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
 	else
 		dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
-	tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+	tmfabort_wqe->ref_itt = (dword | (tmfabort_hdr->rtt & ISCSI_ITT_MASK));
 	tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
 
 	tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;