diff options
Diffstat (limited to 'drivers/scsi/isci/host.c')
-rw-r--r-- | drivers/scsi/isci/host.c | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 6981b77..f07f30f 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1263,6 +1263,10 @@ void isci_host_deinit(struct isci_host *ihost) { int i; + /* disable output data selects */ + for (i = 0; i < isci_gpio_count(ihost); i++) + writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]); + isci_host_change_state(ihost, isci_stopping); for (i = 0; i < SCI_MAX_PORTS; i++) { struct isci_port *iport = &ihost->ports[i]; @@ -1281,6 +1285,12 @@ void isci_host_deinit(struct isci_host *ihost) spin_unlock_irq(&ihost->scic_lock); wait_for_stop(ihost); + + /* disable sgpio: where the above wait should give time for the + * enclosure to sample the gpios going inactive + */ + writel(0, &ihost->scu_registers->peg0.sgpio.interface_control); + sci_controller_reset(ihost); /* Cancel any/all outstanding port timers */ @@ -2365,6 +2375,12 @@ int isci_host_init(struct isci_host *ihost) for (i = 0; i < SCI_MAX_PHYS; i++) isci_phy_init(&ihost->phys[i], ihost, i); + /* enable sgpio */ + writel(1, &ihost->scu_registers->peg0.sgpio.interface_control); + for (i = 0; i < isci_gpio_count(ihost); i++) + writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]); + writel(0, &ihost->scu_registers->peg0.sgpio.vendor_specific_code); + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { struct isci_remote_device *idev = &ihost->devices[i]; @@ -2760,3 +2776,56 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost, return status; } + +static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_count, u8 *write_data) +{ + int d; + + /* no support for TX_GP_CFG */ + if (reg_index == 0) + return -EINVAL; + + for (d = 0; d < isci_gpio_count(ihost); d++) { + u32 val = 0x444; /* all ODx.n clear */ + int i; + + for (i = 0; i < 3; i++) { + int bit = (i << 2) + 2; + + bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i), + write_data, reg_index, + reg_count); + if (bit < 0) + break; + + /* if od is set, clear the 'invert' bit */ + val &= ~(bit << ((i << 2) + 2)); + } + + if (i < 3) + break; + writel(val, &ihost->scu_registers->peg0.sgpio.output_data_select[d]); + } + + /* unless reg_index is > 1, we should always be able to write at + * least one register + */ + return d > 0; +} + +int isci_gpio_write(struct sas_ha_struct *sas_ha, u8 reg_type, u8 reg_index, + u8 reg_count, u8 *write_data) +{ + struct isci_host *ihost = sas_ha->lldd_ha; + int written; + + switch (reg_type) { + case SAS_GPIO_REG_TX_GP: + written = sci_write_gpio_tx_gp(ihost, reg_index, reg_count, write_data); + break; + default: + written = -EINVAL; + } + + return written; +} |