diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 4229bb4..e7fe114 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -349,6 +349,12 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) } } + if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) { + if (qla24xx_read_fcp_prio_cfg(vha)) + qla_printk(KERN_ERR, ha, + "Unable to read FCP priority data.\n"); + } + return (rval); } @@ -4905,3 +4911,165 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha) ha->fw_options[2] |= BIT_9; qla2x00_set_fw_options(vha, ha->fw_options); } + +/* + * qla24xx_get_fcp_prio + * Gets the fcp cmd priority value for the logged in port. + * Looks for a match of the port descriptors within + * each of the fcp prio config entries. If a match is found, + * the tag (priority) value is returned. + * + * Input: + * ha = adapter block po + * fcport = port structure pointer. + * + * Return: + * non-zero (if found) + * 0 (if not found) + * + * Context: + * Kernel context + */ +uint8_t +qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport) +{ + int i, entries; + uint8_t pid_match, wwn_match; + uint8_t priority; + uint32_t pid1, pid2; + uint64_t wwn1, wwn2; + struct qla_fcp_prio_entry *pri_entry; + struct qla_hw_data *ha = vha->hw; + + if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled) + return 0; + + priority = 0; + entries = ha->fcp_prio_cfg->num_entries; + pri_entry = &ha->fcp_prio_cfg->entry[0]; + + for (i = 0; i < entries; i++) { + pid_match = wwn_match = 0; + + if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) { + pri_entry++; + continue; + } + + /* check source pid for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) { + pid1 = pri_entry->src_pid & INVALID_PORT_ID; + pid2 = vha->d_id.b24 & INVALID_PORT_ID; + if (pid1 == INVALID_PORT_ID) + pid_match++; + else if (pid1 == pid2) + pid_match++; + } + + /* check destination pid for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) { + pid1 = pri_entry->dst_pid & INVALID_PORT_ID; + pid2 = fcport->d_id.b24 & INVALID_PORT_ID; + if (pid1 == INVALID_PORT_ID) + pid_match++; + else if (pid1 == pid2) + pid_match++; + } + + /* check source WWN for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) { + wwn1 = wwn_to_u64(vha->port_name); + wwn2 = wwn_to_u64(pri_entry->src_wwpn); + if (wwn2 == (uint64_t)-1) + wwn_match++; + else if (wwn1 == wwn2) + wwn_match++; + } + + /* check destination WWN for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) { + wwn1 = wwn_to_u64(fcport->port_name); + wwn2 = wwn_to_u64(pri_entry->dst_wwpn); + if (wwn2 == (uint64_t)-1) + wwn_match++; + else if (wwn1 == wwn2) + wwn_match++; + } + + if (pid_match == 2 || wwn_match == 2) { + /* Found a matching entry */ + if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID) + priority = pri_entry->tag; + break; + } + + pri_entry++; + } + + return priority; +} + +/* + * qla24xx_update_fcport_fcp_prio + * Activates fcp priority for the logged in fc port + * + * Input: + * ha = adapter block pointer. + * fcp = port structure pointer. + * + * Return: + * QLA_SUCCESS or QLA_FUNCTION_FAILED + * + * Context: + * Kernel context. + */ +int +qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *ha, fc_port_t *fcport) +{ + int ret; + uint8_t priority; + uint16_t mb[5]; + + if (atomic_read(&fcport->state) == FCS_UNCONFIGURED || + fcport->port_type != FCT_TARGET || + fcport->loop_id == FC_NO_LOOP_ID) + return QLA_FUNCTION_FAILED; + + priority = qla24xx_get_fcp_prio(ha, fcport); + ret = qla24xx_set_fcp_prio(ha, fcport->loop_id, priority, mb); + if (ret == QLA_SUCCESS) + fcport->fcp_prio = priority; + else + DEBUG2(printk(KERN_WARNING + "scsi(%ld): Unable to activate fcp priority, " + " ret=0x%x\n", ha->host_no, ret)); + + return ret; +} + +/* + * qla24xx_update_all_fcp_prio + * Activates fcp priority for all the logged in ports + * + * Input: + * ha = adapter block pointer. + * + * Return: + * QLA_SUCCESS or QLA_FUNCTION_FAILED + * + * Context: + * Kernel context. + */ +int +qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha) +{ + int ret; + fc_port_t *fcport; + + ret = QLA_FUNCTION_FAILED; + /* We need to set priority for all logged in ports */ + list_for_each_entry(fcport, &vha->vp_fcports, list) + ret = qla24xx_update_fcport_fcp_prio(vha, fcport); + + return ret; +} |