diff options
Diffstat (limited to 'drivers/scsi/smartpqi/smartpqi_sis.c')
-rw-r--r-- | drivers/scsi/smartpqi/smartpqi_sis.c | 394 |
1 files changed, 394 insertions, 0 deletions
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c b/drivers/scsi/smartpqi/smartpqi_sis.c new file mode 100644 index 0000000..5d416a8 --- /dev/null +++ b/drivers/scsi/smartpqi/smartpqi_sis.c @@ -0,0 +1,394 @@ +/* + * driver for Microsemi PQI-based storage controllers + * Copyright (c) 2016 Microsemi Corporation + * Copyright (c) 2016 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <scsi/scsi_device.h> +#include <asm/unaligned.h> +#include "smartpqi.h" +#include "smartpqi_sis.h" + +/* legacy SIS interface commands */ +#define SIS_CMD_GET_ADAPTER_PROPERTIES 0x19 +#define SIS_CMD_INIT_BASE_STRUCT_ADDRESS 0x1b +#define SIS_CMD_GET_PQI_CAPABILITIES 0x3000 + +/* for submission of legacy SIS commands */ +#define SIS_REENABLE_SIS_MODE 0x1 +#define SIS_ENABLE_MSIX 0x40 +#define SIS_SOFT_RESET 0x100 +#define SIS_CMD_READY 0x200 +#define SIS_CMD_COMPLETE 0x1000 +#define SIS_CLEAR_CTRL_TO_HOST_DOORBELL 0x1000 +#define SIS_CMD_STATUS_SUCCESS 0x1 +#define SIS_CMD_COMPLETE_TIMEOUT_SECS 30 +#define SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS 10 + +/* used with SIS_CMD_GET_ADAPTER_PROPERTIES command */ +#define SIS_EXTENDED_PROPERTIES_SUPPORTED 0x800000 +#define SIS_SMARTARRAY_FEATURES_SUPPORTED 0x2 +#define SIS_PQI_MODE_SUPPORTED 0x4 +#define SIS_REQUIRED_EXTENDED_PROPERTIES \ + (SIS_SMARTARRAY_FEATURES_SUPPORTED | SIS_PQI_MODE_SUPPORTED) + +/* used with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */ +#define SIS_BASE_STRUCT_REVISION 9 +#define SIS_BASE_STRUCT_ALIGNMENT 16 + +#define SIS_CTRL_KERNEL_UP 0x80 +#define SIS_CTRL_KERNEL_PANIC 0x100 +#define SIS_CTRL_READY_TIMEOUT_SECS 30 +#define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10 + +#pragma pack(1) + +/* for use with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */ +struct sis_base_struct { + __le32 revision; /* revision of this structure */ + __le32 flags; /* reserved */ + __le32 error_buffer_paddr_low; /* lower 32 bits of physical memory */ + /* buffer for PQI error response */ + /* data */ + __le32 error_buffer_paddr_high; /* upper 32 bits of physical */ + /* memory buffer for PQI */ + /* error response data */ + __le32 error_buffer_element_length; /* length of each PQI error */ + /* response buffer element */ + /* in bytes */ + __le32 error_buffer_num_elements; /* total number of PQI error */ + /* response buffers available */ +}; + +#pragma pack() + +int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info) +{ + unsigned long timeout; + u32 status; + + timeout = (SIS_CTRL_READY_TIMEOUT_SECS * HZ) + jiffies; + + while (1) { + status = readl(&ctrl_info->registers->sis_firmware_status); + if (status != ~0) { + if (status & SIS_CTRL_KERNEL_PANIC) { + dev_err(&ctrl_info->pci_dev->dev, + "controller is offline: status code 0x%x\n", + readl( + &ctrl_info->registers->sis_mailbox[7])); + return -ENODEV; + } + if (status & SIS_CTRL_KERNEL_UP) + break; + } + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + msleep(SIS_CTRL_READY_POLL_INTERVAL_MSECS); + } + + return 0; +} + +bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info) +{ + bool running; + u32 status; + + status = readl(&ctrl_info->registers->sis_firmware_status); + + if (status & SIS_CTRL_KERNEL_PANIC) + running = false; + else + running = true; + + if (!running) + dev_err(&ctrl_info->pci_dev->dev, + "controller is offline: status code 0x%x\n", + readl(&ctrl_info->registers->sis_mailbox[7])); + + return running; +} + +/* used for passing command parameters/results when issuing SIS commands */ +struct sis_sync_cmd_params { + u32 mailbox[6]; /* mailboxes 0-5 */ +}; + +static int sis_send_sync_cmd(struct pqi_ctrl_info *ctrl_info, + u32 cmd, struct sis_sync_cmd_params *params) +{ + struct pqi_ctrl_registers __iomem *registers; + unsigned int i; + unsigned long timeout; + u32 doorbell; + u32 cmd_status; + + registers = ctrl_info->registers; + + /* Write the command to mailbox 0. */ + writel(cmd, ®isters->sis_mailbox[0]); + + /* + * Write the command parameters to mailboxes 1-4 (mailbox 5 is not used + * when sending a command to the controller). + */ + for (i = 1; i <= 4; i++) + writel(params->mailbox[i], ®isters->sis_mailbox[i]); + + /* Clear the command doorbell. */ + writel(SIS_CLEAR_CTRL_TO_HOST_DOORBELL, + ®isters->sis_ctrl_to_host_doorbell_clear); + + /* Disable doorbell interrupts by masking all interrupts. */ + writel(~0, ®isters->sis_interrupt_mask); + + /* + * Force the completion of the interrupt mask register write before + * submitting the command. + */ + readl(®isters->sis_interrupt_mask); + + /* Submit the command to the controller. */ + writel(SIS_CMD_READY, ®isters->sis_host_to_ctrl_doorbell); + + /* + * Poll for command completion. Note that the call to msleep() is at + * the top of the loop in order to give the controller time to start + * processing the command before we start polling. + */ + timeout = (SIS_CMD_COMPLETE_TIMEOUT_SECS * HZ) + jiffies; + while (1) { + msleep(SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS); + doorbell = readl(®isters->sis_ctrl_to_host_doorbell); + if (doorbell & SIS_CMD_COMPLETE) + break; + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + } + + /* Read the command status from mailbox 0. */ + cmd_status = readl(®isters->sis_mailbox[0]); + if (cmd_status != SIS_CMD_STATUS_SUCCESS) { + dev_err(&ctrl_info->pci_dev->dev, + "SIS command failed for command 0x%x: status = 0x%x\n", + cmd, cmd_status); + return -EINVAL; + } + + /* + * The command completed successfully, so save the command status and + * read the values returned in mailboxes 1-5. + */ + params->mailbox[0] = cmd_status; + for (i = 1; i < ARRAY_SIZE(params->mailbox); i++) + params->mailbox[i] = readl(®isters->sis_mailbox[i]); + + return 0; +} + +/* + * This function verifies that we are talking to a controller that speaks PQI. + */ + +int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info) +{ + int rc; + u32 properties; + u32 extended_properties; + struct sis_sync_cmd_params params; + + memset(¶ms, 0, sizeof(params)); + + rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_ADAPTER_PROPERTIES, + ¶ms); + if (rc) + return rc; + + properties = params.mailbox[1]; + + if (!(properties & SIS_EXTENDED_PROPERTIES_SUPPORTED)) + return -ENODEV; + + extended_properties = params.mailbox[4]; + + if ((extended_properties & SIS_REQUIRED_EXTENDED_PROPERTIES) != + SIS_REQUIRED_EXTENDED_PROPERTIES) + return -ENODEV; + + return 0; +} + +int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info) +{ + int rc; + struct sis_sync_cmd_params params; + + memset(¶ms, 0, sizeof(params)); + + rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_PQI_CAPABILITIES, + ¶ms); + if (rc) + return rc; + + ctrl_info->max_sg_entries = params.mailbox[1]; + ctrl_info->max_transfer_size = params.mailbox[2]; + ctrl_info->max_outstanding_requests = params.mailbox[3]; + ctrl_info->config_table_offset = params.mailbox[4]; + ctrl_info->config_table_length = params.mailbox[5]; + + return 0; +} + +int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info) +{ + int rc; + void *base_struct_unaligned; + struct sis_base_struct *base_struct; + struct sis_sync_cmd_params params; + unsigned long error_buffer_paddr; + dma_addr_t bus_address; + + base_struct_unaligned = kzalloc(sizeof(*base_struct) + + SIS_BASE_STRUCT_ALIGNMENT - 1, GFP_KERNEL); + if (!base_struct_unaligned) + return -ENOMEM; + + base_struct = PTR_ALIGN(base_struct_unaligned, + SIS_BASE_STRUCT_ALIGNMENT); + error_buffer_paddr = (unsigned long)ctrl_info->error_buffer_dma_handle; + + put_unaligned_le32(SIS_BASE_STRUCT_REVISION, &base_struct->revision); + put_unaligned_le32(lower_32_bits(error_buffer_paddr), + &base_struct->error_buffer_paddr_low); + put_unaligned_le32(upper_32_bits(error_buffer_paddr), + &base_struct->error_buffer_paddr_high); + put_unaligned_le32(PQI_ERROR_BUFFER_ELEMENT_LENGTH, + &base_struct->error_buffer_element_length); + put_unaligned_le32(ctrl_info->max_io_slots, + &base_struct->error_buffer_num_elements); + + bus_address = pci_map_single(ctrl_info->pci_dev, base_struct, + sizeof(*base_struct), PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(ctrl_info->pci_dev, bus_address)) { + rc = -ENOMEM; + goto out; + } + + memset(¶ms, 0, sizeof(params)); + params.mailbox[1] = lower_32_bits((u64)bus_address); + params.mailbox[2] = upper_32_bits((u64)bus_address); + params.mailbox[3] = sizeof(*base_struct); + + rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_INIT_BASE_STRUCT_ADDRESS, + ¶ms); + + pci_unmap_single(ctrl_info->pci_dev, bus_address, sizeof(*base_struct), + PCI_DMA_TODEVICE); + +out: + kfree(base_struct_unaligned); + + return rc; +} + +/* Enable MSI-X interrupts on the controller. */ + +void sis_enable_msix(struct pqi_ctrl_info *ctrl_info) +{ + u32 doorbell_register; + + doorbell_register = + readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell); + doorbell_register |= SIS_ENABLE_MSIX; + + writel(doorbell_register, + &ctrl_info->registers->sis_host_to_ctrl_doorbell); +} + +/* Disable MSI-X interrupts on the controller. */ + +void sis_disable_msix(struct pqi_ctrl_info *ctrl_info) +{ + u32 doorbell_register; + + doorbell_register = + readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell); + doorbell_register &= ~SIS_ENABLE_MSIX; + + writel(doorbell_register, + &ctrl_info->registers->sis_host_to_ctrl_doorbell); +} + +void sis_soft_reset(struct pqi_ctrl_info *ctrl_info) +{ + writel(SIS_SOFT_RESET, + &ctrl_info->registers->sis_host_to_ctrl_doorbell); +} + +#define SIS_MODE_READY_TIMEOUT_SECS 30 + +int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info) +{ + int rc; + unsigned long timeout; + struct pqi_ctrl_registers __iomem *registers; + u32 doorbell; + + registers = ctrl_info->registers; + + writel(SIS_REENABLE_SIS_MODE, + ®isters->sis_host_to_ctrl_doorbell); + + rc = 0; + timeout = (SIS_MODE_READY_TIMEOUT_SECS * HZ) + jiffies; + + while (1) { + doorbell = readl(®isters->sis_ctrl_to_host_doorbell); + if ((doorbell & SIS_REENABLE_SIS_MODE) == 0) + break; + if (time_after(jiffies, timeout)) { + rc = -ETIMEDOUT; + break; + } + } + + if (rc) + dev_err(&ctrl_info->pci_dev->dev, + "re-enabling SIS mode failed\n"); + + return rc; +} + +static void __attribute__((unused)) verify_structures(void) +{ + BUILD_BUG_ON(offsetof(struct sis_base_struct, + revision) != 0x0); + BUILD_BUG_ON(offsetof(struct sis_base_struct, + flags) != 0x4); + BUILD_BUG_ON(offsetof(struct sis_base_struct, + error_buffer_paddr_low) != 0x8); + BUILD_BUG_ON(offsetof(struct sis_base_struct, + error_buffer_paddr_high) != 0xc); + BUILD_BUG_ON(offsetof(struct sis_base_struct, + error_buffer_element_length) != 0x10); + BUILD_BUG_ON(offsetof(struct sis_base_struct, + error_buffer_num_elements) != 0x14); + BUILD_BUG_ON(sizeof(struct sis_base_struct) != 0x18); +} |