diff options
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/ioc3_serial.c | 5 | ||||
-rw-r--r-- | drivers/serial/serial_cs.c | 205 |
2 files changed, 82 insertions, 128 deletions
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 93de907..ee43efc 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2017,6 +2017,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) struct ioc3_port *port; struct ioc3_port *ports[PORTS_PER_CARD]; int phys_port; + int cnt; DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); @@ -2044,6 +2045,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) if (!port) { printk(KERN_WARNING "IOC3 serial memory not available for port\n"); + ret = -ENOMEM; goto out4; } spin_lock_init(&port->ip_lock); @@ -2146,6 +2148,9 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) /* error exits that give back resources */ out4: + for (cnt = 0; cnt < phys_port; cnt++) + kfree(ports[cnt]); + kfree(card_ptr); return ret; } diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 7d475b2..93760b2 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -45,7 +45,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -183,10 +182,8 @@ static void quirk_config_socket(struct pcmcia_device *link) { struct serial_info *info = link->priv; - if (info->multi) { - link->conf.Present |= PRESENT_EXT_STATUS; - link->conf.ExtStatus = ESR_REQ_ATTN_ENA; - } + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; } static const struct serial_quirk quirks[] = { @@ -265,13 +262,6 @@ static const struct serial_quirk quirks[] = { static int serial_config(struct pcmcia_device * link); -/*====================================================================== - - After a card is removed, serial_remove() will unregister - the serial device(s), and release the PCMCIA configuration. - -======================================================================*/ - static void serial_remove(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -314,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link) return 0; } -/*====================================================================== - - serial_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int serial_probe(struct pcmcia_device *link) { struct serial_info *info; @@ -335,25 +317,13 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; return serial_config(link); } -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void serial_detach(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -361,11 +331,6 @@ static void serial_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "serial_detach\n"); /* - * Ensure any outstanding scheduled tasks are completed. - */ - flush_scheduled_work(); - - /* * Ensure that the ports have been released. */ serial_remove(link); @@ -430,47 +395,45 @@ static int pfc_config(struct pcmcia_device *p_dev) return -ENODEV; } -static int simple_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) { static const int size_table[2] = { 8, 16 }; int *try = priv_data; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if (p_dev->resource[0]->start == 0) + return -ENODEV; - p_dev->io_lines = ((*try & 0x1) == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) - && (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -EINVAL; + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int simple_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -480,11 +443,9 @@ static int simple_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i = -ENODEV, try; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - /* First pass: look for a config entry that looks normal. * Two tries: without IO aliases, then with aliases */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; for (try = 0; try < 4; try++) if (!pcmcia_loop_config(link, simple_config_check, &try)) goto found_port; @@ -500,7 +461,7 @@ static int simple_config(struct pcmcia_device *link) found_port: if (info->multi && (info->manfid == MANFID_3COM)) - link->conf.ConfigIndex &= ~(0x08); + link->config_index &= ~(0x08); /* * Apply any configuration quirks. @@ -508,51 +469,50 @@ found_port: if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -1; return setup_serial(link, info, link->resource[0]->start, link->irq); } -static int multi_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) { - int *base2 = priv_data; + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; /* The quad port cards have bad CIS's, so just look for a window larger than 8 ports and assume it will be right */ - if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[0]->start + 8; - return 0; - } - } - return -ENODEV; + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; } static int multi_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { int *base2 = priv_data; - if (cf->io.nwin == 2) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[1]->start = cf->io.win[1].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[1]->start; - return 0; - } - } - return -ENODEV; + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; } static int multi_config(struct pcmcia_device *link) @@ -560,12 +520,12 @@ static int multi_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i, base2 = 0; + link->config_flags |= CONF_AUTO_SET_IO; /* First, look for a generic full-sized window */ - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = info->multi * 8; - if (pcmcia_loop_config(link, multi_config_check, &base2)) { + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { /* If that didn't work, look for two windows */ - link->resource[0]->end = link->resource[1]->end = 8; info->multi = 2; if (pcmcia_loop_config(link, multi_config_check_notpicky, &base2)) { @@ -584,7 +544,7 @@ static int multi_config(struct pcmcia_device *link) if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -ENODEV; @@ -596,11 +556,11 @@ static int multi_config(struct pcmcia_device *link) info->prodid == PRODID_POSSIO_GCC)) { int err; - if (link->conf.ConfigIndex == 1 || - link->conf.ConfigIndex == 3) { + if (link->config_index == 1 || + link->config_index == 3) { err = setup_serial(link, info, base2, link->irq); - base2 = link->resource[0]->start;; + base2 = link->resource[0]->start; } else { err = setup_serial(link, info, link->resource[0]->start, link->irq); @@ -624,33 +584,24 @@ static int multi_config(struct pcmcia_device *link) return 0; } -static int serial_check_for_multi(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) { struct serial_info *info = p_dev->priv; - if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) - info->multi = cf->io.win[0].len >> 3; + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; - if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && - (cf->io.win[1].len == 8)) + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) info->multi = 2; return 0; /* break */ } -/*====================================================================== - - serial_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - serial device available to the system. - -======================================================================*/ - static int serial_config(struct pcmcia_device * link) { struct serial_info *info = link->priv; @@ -894,9 +845,7 @@ MODULE_FIRMWARE("cis/RS-COM-2P.cis"); static struct pcmcia_driver serial_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "serial_cs", - }, + .name = "serial_cs", .probe = serial_probe, .remove = serial_detach, .id_table = serial_ids, |