diff options
Diffstat (limited to 'drivers/staging/gma500/accel_2d.c')
-rw-r--r-- | drivers/staging/gma500/accel_2d.c | 414 |
1 files changed, 0 insertions, 414 deletions
diff --git a/drivers/staging/gma500/accel_2d.c b/drivers/staging/gma500/accel_2d.c deleted file mode 100644 index b8f78eb..0000000 --- a/drivers/staging/gma500/accel_2d.c +++ /dev/null @@ -1,414 +0,0 @@ -/************************************************************************** - * Copyright (c) 2007-2011, Intel Corporation. - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to - * develop this driver. - * - **************************************************************************/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/tty.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/fb.h> -#include <linux/init.h> -#include <linux/console.h> - -#include <drm/drmP.h> -#include <drm/drm.h> -#include <drm/drm_crtc.h> - -#include "psb_drv.h" -#include "psb_reg.h" -#include "framebuffer.h" - -/** - * psb_spank - reset the 2D engine - * @dev_priv: our PSB DRM device - * - * Soft reset the graphics engine and then reload the necessary registers. - * We use this at initialisation time but it will become relevant for - * accelerated X later - */ -void psb_spank(struct drm_psb_private *dev_priv) -{ - PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET | - _PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET | - _PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET | - _PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET); - PSB_RSGX32(PSB_CR_SOFT_RESET); - - msleep(1); - - PSB_WSGX32(0, PSB_CR_SOFT_RESET); - wmb(); - PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT, - PSB_CR_BIF_CTRL); - wmb(); - (void) PSB_RSGX32(PSB_CR_BIF_CTRL); - - msleep(1); - PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT, - PSB_CR_BIF_CTRL); - (void) PSB_RSGX32(PSB_CR_BIF_CTRL); - PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE); -} - -/** - * psb2_2d_wait_available - wait for FIFO room - * @dev_priv: our DRM device - * @size: size (in dwords) of the command we want to issue - * - * Wait until there is room to load the FIFO with our data. If the - * device is not responding then reset it - */ -static int psb_2d_wait_available(struct drm_psb_private *dev_priv, - unsigned size) -{ - uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF); - unsigned long t = jiffies + HZ; - - while (avail < size) { - avail = PSB_RSGX32(PSB_CR_2D_SOCIF); - if (time_after(jiffies, t)) { - psb_spank(dev_priv); - return -EIO; - } - } - return 0; -} - -/** - * psb_2d_submit - submit a 2D command - * @dev_priv: our DRM device - * @cmdbuf: command to issue - * @size: length (in dwords) - * - * Issue one or more 2D commands to the accelerator. This needs to be - * serialized later when we add the GEM interfaces for acceleration - */ -static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf, - unsigned size) -{ - int ret = 0; - int i; - unsigned submit_size; - unsigned long flags; - - spin_lock_irqsave(&dev_priv->lock_2d, flags); - while (size > 0) { - submit_size = (size < 0x60) ? size : 0x60; - size -= submit_size; - ret = psb_2d_wait_available(dev_priv, submit_size); - if (ret) - break; - - submit_size <<= 2; - - for (i = 0; i < submit_size; i += 4) - PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i); - - (void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4); - } - spin_unlock_irqrestore(&dev_priv->lock_2d, flags); - return ret; -} - - -/** - * psb_accel_2d_copy_direction - compute blit order - * @xdir: X direction of move - * @ydir: Y direction of move - * - * Compute the correct order setings to ensure that an overlapping blit - * correctly copies all the pixels. - */ -static u32 psb_accel_2d_copy_direction(int xdir, int ydir) -{ - if (xdir < 0) - return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL : - PSB_2D_COPYORDER_TR2BL; - else - return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR : - PSB_2D_COPYORDER_TL2BR; -} - -/** - * psb_accel_2d_copy - accelerated 2D copy - * @dev_priv: our DRM device - * @src_offset in bytes - * @src_stride in bytes - * @src_format psb 2D format defines - * @dst_offset in bytes - * @dst_stride in bytes - * @dst_format psb 2D format defines - * @src_x offset in pixels - * @src_y offset in pixels - * @dst_x offset in pixels - * @dst_y offset in pixels - * @size_x of the copied area - * @size_y of the copied area - * - * Format and issue a 2D accelerated copy command. - */ -static int psb_accel_2d_copy(struct drm_psb_private *dev_priv, - uint32_t src_offset, uint32_t src_stride, - uint32_t src_format, uint32_t dst_offset, - uint32_t dst_stride, uint32_t dst_format, - uint16_t src_x, uint16_t src_y, - uint16_t dst_x, uint16_t dst_y, - uint16_t size_x, uint16_t size_y) -{ - uint32_t blit_cmd; - uint32_t buffer[10]; - uint32_t *buf; - uint32_t direction; - - buf = buffer; - - direction = - psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y); - - if (direction == PSB_2D_COPYORDER_BR2TL || - direction == PSB_2D_COPYORDER_TR2BL) { - src_x += size_x - 1; - dst_x += size_x - 1; - } - if (direction == PSB_2D_COPYORDER_BR2TL || - direction == PSB_2D_COPYORDER_BL2TR) { - src_y += size_y - 1; - dst_y += size_y - 1; - } - - blit_cmd = - PSB_2D_BLIT_BH | - PSB_2D_ROT_NONE | - PSB_2D_DSTCK_DISABLE | - PSB_2D_SRCCK_DISABLE | - PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction; - - *buf++ = PSB_2D_FENCE_BH; - *buf++ = - PSB_2D_DST_SURF_BH | dst_format | (dst_stride << - PSB_2D_DST_STRIDE_SHIFT); - *buf++ = dst_offset; - *buf++ = - PSB_2D_SRC_SURF_BH | src_format | (src_stride << - PSB_2D_SRC_STRIDE_SHIFT); - *buf++ = src_offset; - *buf++ = - PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) | - (src_y << PSB_2D_SRCOFF_YSTART_SHIFT); - *buf++ = blit_cmd; - *buf++ = - (dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y << - PSB_2D_DST_YSTART_SHIFT); - *buf++ = - (size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y << - PSB_2D_DST_YSIZE_SHIFT); - *buf++ = PSB_2D_FLUSH_BH; - - return psbfb_2d_submit(dev_priv, buffer, buf - buffer); -} - -/** - * psbfb_copyarea_accel - copyarea acceleration for /dev/fb - * @info: our framebuffer - * @a: copyarea parameters from the framebuffer core - * - * Perform a 2D copy via the accelerator - */ -static void psbfb_copyarea_accel(struct fb_info *info, - const struct fb_copyarea *a) -{ - struct psb_fbdev *fbdev = info->par; - struct psb_framebuffer *psbfb = &fbdev->pfb; - struct drm_device *dev = psbfb->base.dev; - struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb; - struct drm_psb_private *dev_priv = dev->dev_private; - uint32_t offset; - uint32_t stride; - uint32_t src_format; - uint32_t dst_format; - - if (!fb) - return; - - offset = psbfb->gtt->offset; - stride = fb->pitches[0]; - - switch (fb->depth) { - case 8: - src_format = PSB_2D_SRC_332RGB; - dst_format = PSB_2D_DST_332RGB; - break; - case 15: - src_format = PSB_2D_SRC_555RGB; - dst_format = PSB_2D_DST_555RGB; - break; - case 16: - src_format = PSB_2D_SRC_565RGB; - dst_format = PSB_2D_DST_565RGB; - break; - case 24: - case 32: - /* this is wrong but since we don't do blending its okay */ - src_format = PSB_2D_SRC_8888ARGB; - dst_format = PSB_2D_DST_8888ARGB; - break; - default: - /* software fallback */ - cfb_copyarea(info, a); - return; - } - - if (!gma_power_begin(dev, false)) { - cfb_copyarea(info, a); - return; - } - psb_accel_2d_copy(dev_priv, - offset, stride, src_format, - offset, stride, dst_format, - a->sx, a->sy, a->dx, a->dy, a->width, a->height); - gma_power_end(dev); -} - -/** - * psbfb_copyarea - 2D copy interface - * @info: our framebuffer - * @region: region to copy - * - * Copy an area of the framebuffer console either by the accelerator - * or directly using the cfb helpers according to the request - */ -void psbfb_copyarea(struct fb_info *info, - const struct fb_copyarea *region) -{ - if (unlikely(info->state != FBINFO_STATE_RUNNING)) - return; - - /* Avoid the 8 pixel erratum */ - if (region->width == 8 || region->height == 8 || - (info->flags & FBINFO_HWACCEL_DISABLED)) - return cfb_copyarea(info, region); - - psbfb_copyarea_accel(info, region); -} - -/** - * psbfb_sync - synchronize 2D - * @info: our framebuffer - * - * Wait for the 2D engine to quiesce so that we can do CPU - * access to the framebuffer again - */ -int psbfb_sync(struct fb_info *info) -{ - struct psb_fbdev *fbdev = info->par; - struct psb_framebuffer *psbfb = &fbdev->pfb; - struct drm_device *dev = psbfb->base.dev; - struct drm_psb_private *dev_priv = dev->dev_private; - unsigned long _end = jiffies + DRM_HZ; - int busy = 0; - unsigned long flags; - - spin_lock_irqsave(&dev_priv->lock_2d, flags); - /* - * First idle the 2D engine. - */ - - if ((PSB_RSGX32(PSB_CR_2D_SOCIF) == _PSB_C2_SOCIF_EMPTY) && - ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & _PSB_C2B_STATUS_BUSY) == 0)) - goto out; - - do { - busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY); - cpu_relax(); - } while (busy && !time_after_eq(jiffies, _end)); - - if (busy) - busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY); - if (busy) - goto out; - - do { - busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & - _PSB_C2B_STATUS_BUSY) != 0); - cpu_relax(); - } while (busy && !time_after_eq(jiffies, _end)); - if (busy) - busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & - _PSB_C2B_STATUS_BUSY) != 0); - -out: - spin_unlock_irqrestore(&dev_priv->lock_2d, flags); - return (busy) ? -EBUSY : 0; -} - -int psb_accel_ioctl(struct drm_device *dev, void *data, struct drm_file *file) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct drm_psb_2d_op *op = data; - u32 *op_ptr = &op->cmd[0]; - int i; - struct drm_gem_object *obj; - struct gtt_range *gtt; - int err = -EINVAL; - - if (!dev_priv->ops->accel_2d) - return -EOPNOTSUPP; - if (op->size > PSB_2D_OP_BUFLEN) - return -EINVAL; - - /* The GEM object being used. We need to support separate src/dst/etc - in the end but for now keep them all the same */ - obj = drm_gem_object_lookup(dev, file, op->src); - if (obj == NULL) - return -ENOENT; - gtt = container_of(obj, struct gtt_range, gem); - - if (psb_gtt_pin(gtt) < 0) - goto bad_2; - for (i = 0; i < op->size; i++, op_ptr++) { - u32 r = *op_ptr & 0xF0000000; - /* Fill in the GTT offsets for the command buffer */ - if (r == PSB_2D_SRC_SURF_BH || - r == PSB_2D_DST_SURF_BH || - r == PSB_2D_MASK_SURF_BH || - r == PSB_2D_PAT_SURF_BH) { - i++; - op_ptr++; - if (i == op->size) - goto bad; - if (*op_ptr) - goto bad; - *op_ptr = gtt->offset; - continue; - } - } - psbfb_2d_submit(dev_priv, op->cmd, op->size); - err = 0; -bad: - psb_gtt_unpin(gtt); -bad_2: - drm_gem_object_unreference(obj); - return err; -} |