diff options
Diffstat (limited to 'drivers/staging/iio')
28 files changed, 277 insertions, 2074 deletions
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light index 17e5c9c..7c7cd84 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light @@ -1,31 +1,3 @@ - -What: /sys/bus/iio/devices/device[n]/range -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent ADC Full Scale Range used for some ambient - light sensors in calculating lux. - -What: /sys/bus/iio/devices/device[n]/range_available -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent supported vales for ADC Full Scale Range. - -What: /sys/bus/iio/devices/device[n]/adc_resolution -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent ADC resolution of the ambient light sensor - used in calculating the lux. - -What: /sys/bus/iio/devices/device[n]/adc_resolution_available -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent list of possible values supported for the - adc_resolution of the given sensor. - What: /sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw] KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c index 7939ae6..7a6fed3 100644 --- a/drivers/staging/iio/accel/lis3l02dq_core.c +++ b/drivers/staging/iio/accel/lis3l02dq_core.c @@ -567,7 +567,7 @@ static int lis3l02dq_read_event_config(struct iio_dev *indio_dev, { u8 val; int ret; - u8 mask = (1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING))); + u8 mask = 1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING)); ret = lis3l02dq_spi_read_reg_8(indio_dev, LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, @@ -622,7 +622,7 @@ static int lis3l02dq_write_event_config(struct iio_dev *indio_dev, u8 val, control; u8 currentlyset; bool changed = false; - u8 mask = (1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING))); + u8 mask = 1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING)); mutex_lock(&indio_dev->mlock); /* read current control */ diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index 02e930c..a8f533a 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -216,8 +216,7 @@ static int sca3000_read_ctrl_reg(struct sca3000_state *st, ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_CTRL_DATA, 1); if (ret) goto error_ret; - else - return st->rx[0]; + return st->rx[0]; error_ret: return ret; } diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c index 1920dc60..d1cb9b9 100644 --- a/drivers/staging/iio/accel/sca3000_ring.c +++ b/drivers/staging/iio/accel/sca3000_ring.c @@ -99,8 +99,7 @@ static int sca3000_read_first_n_hw_rb(struct iio_buffer *r, ret = sca3000_read_data_short(st, SCA3000_REG_ADDR_BUF_COUNT, 1); if (ret) goto error_ret; - else - num_available = st->rx[0]; + num_available = st->rx[0]; /* * num_available is the total number of samples available * i.e. number of time points * number of channels. diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index b9519be..deff899 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -59,12 +59,12 @@ config AD7816 temperature sensors and ADC. config AD7192 - tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver" + tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" depends on SPI select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7190, - AD7192 or AD7195 SPI analog to digital converters (ADC). + AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the @@ -92,20 +92,6 @@ config LPC32XX_ADC activate only one via device tree selection. Provides direct access via sysfs. -config MXS_LRADC - tristate "Freescale i.MX23/i.MX28 LRADC" - depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM - depends on INPUT - select STMP_DEVICE - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - help - Say yes here to build support for i.MX23/i.MX28 LRADC convertor - built into these chips. - - To compile this driver as a module, choose M here: the - module will be called mxs-lradc. - config SPEAR_ADC tristate "ST SPEAr ADC" depends on PLAT_SPEAR || COMPILE_TEST diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 0c87ce3..3cdd83c 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -12,5 +12,4 @@ obj-$(CONFIG_AD7816) += ad7816.o obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_AD7280) += ad7280a.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o -obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 9221103..f843f19 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -1,7 +1,7 @@ /* - * AD7190 AD7192 AD7195 SPI ADC driver + * AD7190 AD7192 AD7193 AD7195 SPI ADC driver * - * Copyright 2011-2012 Analog Devices Inc. + * Copyright 2011-2015 Analog Devices Inc. * * Licensed under the GPL-2. */ @@ -92,26 +92,43 @@ #define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ #define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ -#define AD7192_CONF_CHAN(x) (((1 << (x)) & 0xFF) << 8) /* Channel select */ -#define AD7192_CONF_CHAN_MASK (0xFF << 8) /* Channel select mask */ +#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ +#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ #define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ #define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ #define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ #define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ #define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ -#define AD7192_CH_AIN1P_AIN2M 0 /* AIN1(+) - AIN2(-) */ -#define AD7192_CH_AIN3P_AIN4M 1 /* AIN3(+) - AIN4(-) */ -#define AD7192_CH_TEMP 2 /* Temp Sensor */ -#define AD7192_CH_AIN2P_AIN2M 3 /* AIN2(+) - AIN2(-) */ -#define AD7192_CH_AIN1 4 /* AIN1 - AINCOM */ -#define AD7192_CH_AIN2 5 /* AIN2 - AINCOM */ -#define AD7192_CH_AIN3 6 /* AIN3 - AINCOM */ -#define AD7192_CH_AIN4 7 /* AIN4 - AINCOM */ +#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ +#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ +#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ +#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ +#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ +#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ +#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ +#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ + +#define AD7193_CH_AIN1P_AIN2M 0x000 /* AIN1(+) - AIN2(-) */ +#define AD7193_CH_AIN3P_AIN4M 0x001 /* AIN3(+) - AIN4(-) */ +#define AD7193_CH_AIN5P_AIN6M 0x002 /* AIN5(+) - AIN6(-) */ +#define AD7193_CH_AIN7P_AIN8M 0x004 /* AIN7(+) - AIN8(-) */ +#define AD7193_CH_TEMP 0x100 /* Temp senseor */ +#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ +#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ +#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ +#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ +#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ +#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ +#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ +#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ +#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ +#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ /* ID Register Bit Designations (AD7192_REG_ID) */ #define ID_AD7190 0x4 #define ID_AD7192 0x0 +#define ID_AD7193 0x2 #define ID_AD7195 0x6 #define AD7192_ID_MASK 0x0F @@ -236,7 +253,7 @@ static int ad7192_setup(struct ad7192_state *st, st->mclk = pdata->ext_clk_hz; else st->mclk = AD7192_INT_FREQ_MHZ; - break; + break; default: ret = -EINVAL; goto out; @@ -607,6 +624,24 @@ static const struct iio_chan_spec ad7192_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(8), }; +static const struct iio_chan_spec ad7193_channels[] = { + AD_SD_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M, 24, 32, 0), + AD_SD_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M, 24, 32, 0), + AD_SD_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M, 24, 32, 0), + AD_SD_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M, 24, 32, 0), + AD_SD_TEMP_CHANNEL(4, AD7193_CH_TEMP, 24, 32, 0), + AD_SD_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M, 24, 32, 0), + AD_SD_CHANNEL(6, 1, AD7193_CH_AIN1, 24, 32, 0), + AD_SD_CHANNEL(7, 2, AD7193_CH_AIN2, 24, 32, 0), + AD_SD_CHANNEL(8, 3, AD7193_CH_AIN3, 24, 32, 0), + AD_SD_CHANNEL(9, 4, AD7193_CH_AIN4, 24, 32, 0), + AD_SD_CHANNEL(10, 5, AD7193_CH_AIN5, 24, 32, 0), + AD_SD_CHANNEL(11, 6, AD7193_CH_AIN6, 24, 32, 0), + AD_SD_CHANNEL(12, 7, AD7193_CH_AIN7, 24, 32, 0), + AD_SD_CHANNEL(13, 8, AD7193_CH_AIN8, 24, 32, 0), + IIO_CHAN_SOFT_TIMESTAMP(14), +}; + static int ad7192_probe(struct spi_device *spi) { const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev); @@ -651,8 +686,18 @@ static int ad7192_probe(struct spi_device *spi) indio_dev->dev.parent = &spi->dev; indio_dev->name = spi_get_device_id(spi)->name; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = ad7192_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); + + switch (st->devid) { + case ID_AD7193: + indio_dev->channels = ad7193_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); + break; + default: + indio_dev->channels = ad7192_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); + break; + } + if (st->devid == ID_AD7195) indio_dev->info = &ad7195_info; else @@ -699,6 +744,7 @@ static int ad7192_remove(struct spi_device *spi) static const struct spi_device_id ad7192_id[] = { {"ad7190", ID_AD7190}, {"ad7192", ID_AD7192}, + {"ad7193", ID_AD7193}, {"ad7195", ID_AD7195}, {} }; @@ -715,5 +761,5 @@ static struct spi_driver ad7192_driver = { module_spi_driver(ad7192_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); -MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7195 ADC"); +MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c index f45ebed..62e5eca 100644 --- a/drivers/staging/iio/adc/ad7280a.c +++ b/drivers/staging/iio/adc/ad7280a.c @@ -214,8 +214,8 @@ static int __ad7280_read32(struct ad7280_state *st, unsigned *val) static int ad7280_write(struct ad7280_state *st, unsigned devaddr, unsigned addr, bool all, unsigned val) { - unsigned reg = (devaddr << 27 | addr << 21 | - (val & 0xFF) << 13 | all << 12); + unsigned reg = devaddr << 27 | addr << 21 | + (val & 0xFF) << 13 | all << 12; reg |= ad7280_calc_crc8(st->crc_tab, reg >> 11) << 3 | 0x2; st->buf[0] = cpu_to_be32(reg); diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h index ec89d05..cca9469 100644 --- a/drivers/staging/iio/adc/ad7606.h +++ b/drivers/staging/iio/adc/ad7606.h @@ -85,8 +85,6 @@ struct ad7606_bus_ops { int (*read_block)(struct device *, int, void *); }; -void ad7606_suspend(struct iio_dev *indio_dev); -void ad7606_resume(struct iio_dev *indio_dev); struct iio_dev *ad7606_probe(struct device *dev, int irq, void __iomem *base_address, unsigned id, const struct ad7606_bus_ops *bops); @@ -101,4 +99,12 @@ enum ad7606_supported_device_ids { int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev); void ad7606_ring_cleanup(struct iio_dev *indio_dev); + +#ifdef CONFIG_PM_SLEEP +extern const struct dev_pm_ops ad7606_pm_ops; +#define AD7606_PM_OPS (&ad7606_pm_ops) +#else +#define AD7606_PM_OPS NULL +#endif + #endif /* IIO_ADC_AD7606_H_ */ diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c index 2c9d8b7..fe6caee 100644 --- a/drivers/staging/iio/adc/ad7606_core.c +++ b/drivers/staging/iio/adc/ad7606_core.c @@ -250,7 +250,8 @@ static const struct attribute_group ad7606_attribute_group_range = { }, \ } -static const struct iio_chan_spec ad7606_8_channels[] = { +static const struct iio_chan_spec ad7606_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(8), AD7606_CHANNEL(0), AD7606_CHANNEL(1), AD7606_CHANNEL(2), @@ -259,25 +260,6 @@ static const struct iio_chan_spec ad7606_8_channels[] = { AD7606_CHANNEL(5), AD7606_CHANNEL(6), AD7606_CHANNEL(7), - IIO_CHAN_SOFT_TIMESTAMP(8), -}; - -static const struct iio_chan_spec ad7606_6_channels[] = { - AD7606_CHANNEL(0), - AD7606_CHANNEL(1), - AD7606_CHANNEL(2), - AD7606_CHANNEL(3), - AD7606_CHANNEL(4), - AD7606_CHANNEL(5), - IIO_CHAN_SOFT_TIMESTAMP(6), -}; - -static const struct iio_chan_spec ad7606_4_channels[] = { - AD7606_CHANNEL(0), - AD7606_CHANNEL(1), - AD7606_CHANNEL(2), - AD7606_CHANNEL(3), - IIO_CHAN_SOFT_TIMESTAMP(4), }; static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { @@ -287,20 +269,20 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { [ID_AD7606_8] = { .name = "ad7606", .int_vref_mv = 2500, - .channels = ad7606_8_channels, - .num_channels = 8, + .channels = ad7606_channels, + .num_channels = 9, }, [ID_AD7606_6] = { .name = "ad7606-6", .int_vref_mv = 2500, - .channels = ad7606_6_channels, - .num_channels = 6, + .channels = ad7606_channels, + .num_channels = 7, }, [ID_AD7606_4] = { .name = "ad7606-4", .int_vref_mv = 2500, - .channels = ad7606_4_channels, - .num_channels = 4, + .channels = ad7606_channels, + .num_channels = 5, }, }; @@ -578,8 +560,11 @@ int ad7606_remove(struct iio_dev *indio_dev, int irq) } EXPORT_SYMBOL_GPL(ad7606_remove); -void ad7606_suspend(struct iio_dev *indio_dev) +#ifdef CONFIG_PM_SLEEP + +static int ad7606_suspend(struct device *dev) { + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); if (gpio_is_valid(st->pdata->gpio_stby)) { @@ -587,11 +572,13 @@ void ad7606_suspend(struct iio_dev *indio_dev) gpio_set_value(st->pdata->gpio_range, 1); gpio_set_value(st->pdata->gpio_stby, 0); } + + return 0; } -EXPORT_SYMBOL_GPL(ad7606_suspend); -void ad7606_resume(struct iio_dev *indio_dev) +static int ad7606_resume(struct device *dev) { + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); if (gpio_is_valid(st->pdata->gpio_stby)) { @@ -602,8 +589,14 @@ void ad7606_resume(struct iio_dev *indio_dev) gpio_set_value(st->pdata->gpio_stby, 1); ad7606_reset(st); } + + return 0; } -EXPORT_SYMBOL_GPL(ad7606_resume); + +SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume); +EXPORT_SYMBOL_GPL(ad7606_pm_ops); + +#endif MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c index adc370e..84d2393 100644 --- a/drivers/staging/iio/adc/ad7606_par.c +++ b/drivers/staging/iio/adc/ad7606_par.c @@ -90,36 +90,6 @@ static int ad7606_par_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int ad7606_par_suspend(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - - ad7606_suspend(indio_dev); - - return 0; -} - -static int ad7606_par_resume(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - - ad7606_resume(indio_dev); - - return 0; -} - -static const struct dev_pm_ops ad7606_pm_ops = { - .suspend = ad7606_par_suspend, - .resume = ad7606_par_resume, -}; - -#define AD7606_PAR_PM_OPS (&ad7606_pm_ops) - -#else -#define AD7606_PAR_PM_OPS NULL -#endif /* CONFIG_PM */ - static const struct platform_device_id ad7606_driver_ids[] = { { .name = "ad7606-8", @@ -142,7 +112,7 @@ static struct platform_driver ad7606_driver = { .id_table = ad7606_driver_ids, .driver = { .name = "ad7606", - .pm = AD7606_PAR_PM_OPS, + .pm = AD7606_PM_OPS, }, }; diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c index cbb3631..d873a51 100644 --- a/drivers/staging/iio/adc/ad7606_spi.c +++ b/drivers/staging/iio/adc/ad7606_spi.c @@ -62,36 +62,6 @@ static int ad7606_spi_remove(struct spi_device *spi) return ad7606_remove(indio_dev, spi->irq); } -#ifdef CONFIG_PM -static int ad7606_spi_suspend(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - - ad7606_suspend(indio_dev); - - return 0; -} - -static int ad7606_spi_resume(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - - ad7606_resume(indio_dev); - - return 0; -} - -static const struct dev_pm_ops ad7606_pm_ops = { - .suspend = ad7606_spi_suspend, - .resume = ad7606_spi_resume, -}; - -#define AD7606_SPI_PM_OPS (&ad7606_pm_ops) - -#else -#define AD7606_SPI_PM_OPS NULL -#endif - static const struct spi_device_id ad7606_id[] = { {"ad7606-8", ID_AD7606_8}, {"ad7606-6", ID_AD7606_6}, @@ -103,7 +73,7 @@ MODULE_DEVICE_TABLE(spi, ad7606_id); static struct spi_driver ad7606_driver = { .driver = { .name = "ad7606", - .pm = AD7606_SPI_PM_OPS, + .pm = AD7606_PM_OPS, }, .probe = ad7606_spi_probe, .remove = ad7606_spi_remove, diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c index 2226051..ac3735c 100644 --- a/drivers/staging/iio/adc/ad7816.c +++ b/drivers/staging/iio/adc/ad7816.c @@ -296,14 +296,14 @@ static inline ssize_t ad7816_set_oti(struct device *dev, dev_err(dev, "Invalid oti channel id %d.\n", chip->channel_id); return -EINVAL; } else if (chip->channel_id == 0) { - if (ret || value < AD7816_BOUND_VALUE_MIN || + if (value < AD7816_BOUND_VALUE_MIN || value > AD7816_BOUND_VALUE_MAX) return -EINVAL; data = (u8)(value - AD7816_BOUND_VALUE_MIN + AD7816_BOUND_VALUE_BASE); } else { - if (ret || value < AD7816_BOUND_VALUE_BASE || value > 255) + if (value < AD7816_BOUND_VALUE_BASE || value > 255) return -EINVAL; data = (u8)value; diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c deleted file mode 100644 index bb1f152..0000000 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ /dev/null @@ -1,1770 +0,0 @@ -/* - * Freescale MXS LRADC driver - * - * Copyright (c) 2012 DENX Software Engineering, GmbH. - * Marek Vasut <marex@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bitops.h> -#include <linux/clk.h> -#include <linux/completion.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/stmp_device.h> -#include <linux/sysfs.h> - -#include <linux/iio/buffer.h> -#include <linux/iio/iio.h> -#include <linux/iio/trigger.h> -#include <linux/iio/trigger_consumer.h> -#include <linux/iio/triggered_buffer.h> -#include <linux/iio/sysfs.h> - -#define DRIVER_NAME "mxs-lradc" - -#define LRADC_MAX_DELAY_CHANS 4 -#define LRADC_MAX_MAPPED_CHANS 8 -#define LRADC_MAX_TOTAL_CHANS 16 - -#define LRADC_DELAY_TIMER_HZ 2000 - -/* - * Make this runtime configurable if necessary. Currently, if the buffered mode - * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before - * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) - * seconds. The result is that the samples arrive every 500mS. - */ -#define LRADC_DELAY_TIMER_PER 200 -#define LRADC_DELAY_TIMER_LOOP 5 - -/* - * Once the pen touches the touchscreen, the touchscreen switches from - * IRQ-driven mode to polling mode to prevent interrupt storm. The polling - * is realized by worker thread, which is called every 20 or so milliseconds. - * This gives the touchscreen enough fluency and does not strain the system - * too much. - */ -#define LRADC_TS_SAMPLE_DELAY_MS 5 - -/* - * The LRADC reads the following amount of samples from each touchscreen - * channel and the driver then computes average of these. - */ -#define LRADC_TS_SAMPLE_AMOUNT 4 - -enum mxs_lradc_id { - IMX23_LRADC, - IMX28_LRADC, -}; - -static const char * const mx23_lradc_irq_names[] = { - "mxs-lradc-touchscreen", - "mxs-lradc-channel0", - "mxs-lradc-channel1", - "mxs-lradc-channel2", - "mxs-lradc-channel3", - "mxs-lradc-channel4", - "mxs-lradc-channel5", - "mxs-lradc-channel6", - "mxs-lradc-channel7", -}; - -static const char * const mx28_lradc_irq_names[] = { - "mxs-lradc-touchscreen", - "mxs-lradc-thresh0", - "mxs-lradc-thresh1", - "mxs-lradc-channel0", - "mxs-lradc-channel1", - "mxs-lradc-channel2", - "mxs-lradc-channel3", - "mxs-lradc-channel4", - "mxs-lradc-channel5", - "mxs-lradc-channel6", - "mxs-lradc-channel7", - "mxs-lradc-button0", - "mxs-lradc-button1", -}; - -struct mxs_lradc_of_config { - const int irq_count; - const char * const *irq_name; - const u32 *vref_mv; -}; - -#define VREF_MV_BASE 1850 - -static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = { - VREF_MV_BASE, /* CH0 */ - VREF_MV_BASE, /* CH1 */ - VREF_MV_BASE, /* CH2 */ - VREF_MV_BASE, /* CH3 */ - VREF_MV_BASE, /* CH4 */ - VREF_MV_BASE, /* CH5 */ - VREF_MV_BASE * 2, /* CH6 VDDIO */ - VREF_MV_BASE * 4, /* CH7 VBATT */ - VREF_MV_BASE, /* CH8 Temp sense 0 */ - VREF_MV_BASE, /* CH9 Temp sense 1 */ - VREF_MV_BASE, /* CH10 */ - VREF_MV_BASE, /* CH11 */ - VREF_MV_BASE, /* CH12 USB_DP */ - VREF_MV_BASE, /* CH13 USB_DN */ - VREF_MV_BASE, /* CH14 VBG */ - VREF_MV_BASE * 4, /* CH15 VDD5V */ -}; - -static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = { - VREF_MV_BASE, /* CH0 */ - VREF_MV_BASE, /* CH1 */ - VREF_MV_BASE, /* CH2 */ - VREF_MV_BASE, /* CH3 */ - VREF_MV_BASE, /* CH4 */ - VREF_MV_BASE, /* CH5 */ - VREF_MV_BASE, /* CH6 */ - VREF_MV_BASE * 4, /* CH7 VBATT */ - VREF_MV_BASE, /* CH8 Temp sense 0 */ - VREF_MV_BASE, /* CH9 Temp sense 1 */ - VREF_MV_BASE * 2, /* CH10 VDDIO */ - VREF_MV_BASE, /* CH11 VTH */ - VREF_MV_BASE * 2, /* CH12 VDDA */ - VREF_MV_BASE, /* CH13 VDDD */ - VREF_MV_BASE, /* CH14 VBG */ - VREF_MV_BASE * 4, /* CH15 VDD5V */ -}; - -static const struct mxs_lradc_of_config mxs_lradc_of_config[] = { - [IMX23_LRADC] = { - .irq_count = ARRAY_SIZE(mx23_lradc_irq_names), - .irq_name = mx23_lradc_irq_names, - .vref_mv = mx23_vref_mv, - }, - [IMX28_LRADC] = { - .irq_count = ARRAY_SIZE(mx28_lradc_irq_names), - .irq_name = mx28_lradc_irq_names, - .vref_mv = mx28_vref_mv, - }, -}; - -enum mxs_lradc_ts { - MXS_LRADC_TOUCHSCREEN_NONE = 0, - MXS_LRADC_TOUCHSCREEN_4WIRE, - MXS_LRADC_TOUCHSCREEN_5WIRE, -}; - -/* - * Touchscreen handling - */ -enum lradc_ts_plate { - LRADC_TOUCH = 0, - LRADC_SAMPLE_X, - LRADC_SAMPLE_Y, - LRADC_SAMPLE_PRESSURE, - LRADC_SAMPLE_VALID, -}; - -enum mxs_lradc_divbytwo { - MXS_LRADC_DIV_DISABLED = 0, - MXS_LRADC_DIV_ENABLED, -}; - -struct mxs_lradc_scale { - unsigned int integer; - unsigned int nano; -}; - -struct mxs_lradc { - struct device *dev; - void __iomem *base; - int irq[13]; - - struct clk *clk; - - u32 *buffer; - struct iio_trigger *trig; - - struct mutex lock; - - struct completion completion; - - const u32 *vref_mv; - struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; - unsigned long is_divided; - - /* - * When the touchscreen is enabled, we give it two private virtual - * channels: #6 and #7. This means that only 6 virtual channels (instead - * of 8) will be available for buffered capture. - */ -#define TOUCHSCREEN_VCHANNEL1 7 -#define TOUCHSCREEN_VCHANNEL2 6 -#define BUFFER_VCHANS_LIMITED 0x3f -#define BUFFER_VCHANS_ALL 0xff - u8 buffer_vchans; - - /* - * Furthermore, certain LRADC channels are shared between touchscreen - * and/or touch-buttons and generic LRADC block. Therefore when using - * either of these, these channels are not available for the regular - * sampling. The shared channels are as follows: - * - * CH0 -- Touch button #0 - * CH1 -- Touch button #1 - * CH2 -- Touch screen XPUL - * CH3 -- Touch screen YPLL - * CH4 -- Touch screen XNUL - * CH5 -- Touch screen YNLR - * CH6 -- Touch screen WIPER (5-wire only) - * - * The bit fields below represents which parts of the LRADC block are - * switched into special mode of operation. These channels can not - * be sampled as regular LRADC channels. The driver will refuse any - * attempt to sample these channels. - */ -#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) -#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) -#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) - enum mxs_lradc_ts use_touchscreen; - bool use_touchbutton; - - struct input_dev *ts_input; - - enum mxs_lradc_id soc; - enum lradc_ts_plate cur_plate; /* state machine */ - bool ts_valid; - unsigned ts_x_pos; - unsigned ts_y_pos; - unsigned ts_pressure; - - /* handle touchscreen's physical behaviour */ - /* samples per coordinate */ - unsigned over_sample_cnt; - /* time clocks between samples */ - unsigned over_sample_delay; - /* time in clocks to wait after the plates where switched */ - unsigned settling_delay; -}; - -#define LRADC_CTRL0 0x00 -# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) -# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) -# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) -# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) -# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) -# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) -# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) -# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) - -# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) -# define LRADC_CTRL0_MX23_YM BIT(19) -# define LRADC_CTRL0_MX23_XM BIT(18) -# define LRADC_CTRL0_MX23_YP BIT(17) -# define LRADC_CTRL0_MX23_XP BIT(16) - -# define LRADC_CTRL0_MX28_PLATE_MASK \ - (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ - LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ - LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ - LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) - -# define LRADC_CTRL0_MX23_PLATE_MASK \ - (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ - LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ - LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) - -#define LRADC_CTRL1 0x10 -#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) -#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) -#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) -#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) -#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 -#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) -#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) -#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff -#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff -#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 - -#define LRADC_CTRL2 0x20 -#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 -#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) - -#define LRADC_STATUS 0x40 -#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) - -#define LRADC_CH(n) (0x50 + (0x10 * (n))) -#define LRADC_CH_ACCUMULATE BIT(29) -#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) -#define LRADC_CH_NUM_SAMPLES_OFFSET 24 -#define LRADC_CH_NUM_SAMPLES(x) \ - ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) -#define LRADC_CH_VALUE_MASK 0x3ffff -#define LRADC_CH_VALUE_OFFSET 0 - -#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) -#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) -#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 -#define LRADC_DELAY_TRIGGER(x) \ - (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ - LRADC_DELAY_TRIGGER_LRADCS_MASK) -#define LRADC_DELAY_KICK BIT(20) -#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) -#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 -#define LRADC_DELAY_TRIGGER_DELAYS(x) \ - (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ - LRADC_DELAY_TRIGGER_DELAYS_MASK) -#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) -#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 -#define LRADC_DELAY_LOOP(x) \ - (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ - LRADC_DELAY_LOOP_COUNT_MASK) -#define LRADC_DELAY_DELAY_MASK 0x7ff -#define LRADC_DELAY_DELAY_OFFSET 0 -#define LRADC_DELAY_DELAY(x) \ - (((x) << LRADC_DELAY_DELAY_OFFSET) & \ - LRADC_DELAY_DELAY_MASK) - -#define LRADC_CTRL4 0x140 -#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) -#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) -#define LRADC_CTRL4_LRADCSELECT(n, x) \ - (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ - LRADC_CTRL4_LRADCSELECT_MASK(n)) - -#define LRADC_RESOLUTION 12 -#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) - -static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg + STMP_OFFSET_REG_SET); -} - -static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR); -} - -static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg); -} - -static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_PLATE_MASK; - return LRADC_CTRL0_MX28_PLATE_MASK; -} - -static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK; - return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK; -} - -static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; - return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; -} - -static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE; - return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE; -} - -static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM; - return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW; -} - -static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM; - return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW; -} - -static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM; - return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; -} - -static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) -{ - return !!(readl(lradc->base + LRADC_STATUS) & - LRADC_STATUS_TOUCH_DETECT_RAW); -} - -static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch, - unsigned ch) -{ - mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch), - LRADC_CTRL4); - mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4); -} - -static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) -{ - /* - * prepare for oversampling conversion - * - * from the datasheet: - * "The ACCUMULATE bit in the appropriate channel register - * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; - * otherwise, the IRQs will not fire." - */ - mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE | - LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1), - LRADC_CH(ch)); - - /* from the datasheet: - * "Software must clear this register in preparation for a - * multi-cycle accumulation. - */ - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); - - /* - * prepare the delay/loop unit according to the oversampling count - * - * from the datasheet: - * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1, - * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise, - * the LRADC will not trigger the delay group." - */ - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) | - LRADC_DELAY_TRIGGER_DELAYS(0) | - LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | - LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), - LRADC_DELAY(3)); - - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); - - /* - * after changing the touchscreen plates setting - * the signals need some initial time to settle. Start the - * SoC's delay unit and start the conversion later - * and automatically. - */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ - LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ - LRADC_DELAY_KICK | - LRADC_DELAY_DELAY(lradc->settling_delay), - LRADC_DELAY(2)); -} - -/* - * Pressure detection is special: - * We want to do both required measurements for the pressure detection in - * one turn. Use the hardware features to chain both conversions and let the - * hardware report one interrupt if both conversions are done - */ -static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, - unsigned ch2) -{ - u32 reg; - - /* - * prepare for oversampling conversion - * - * from the datasheet: - * "The ACCUMULATE bit in the appropriate channel register - * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; - * otherwise, the IRQs will not fire." - */ - reg = LRADC_CH_ACCUMULATE | - LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1); - mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1)); - mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2)); - - /* from the datasheet: - * "Software must clear this register in preparation for a - * multi-cycle accumulation. - */ - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); - - /* prepare the delay/loop unit according to the oversampling count */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(1 << ch1) | - LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ - LRADC_DELAY_TRIGGER_DELAYS(0) | - LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | - LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), - LRADC_DELAY(3)); - - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); - - /* - * after changing the touchscreen plates setting - * the signals need some initial time to settle. Start the - * SoC's delay unit and start the conversion later - * and automatically. - */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ - LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ - LRADC_DELAY_KICK | - LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2)); -} - -static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc, - unsigned channel) -{ - u32 reg; - unsigned num_samples, val; - - reg = readl(lradc->base + LRADC_CH(channel)); - if (reg & LRADC_CH_ACCUMULATE) - num_samples = lradc->over_sample_cnt; - else - num_samples = 1; - - val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; - return val / num_samples; -} - -static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, - unsigned ch1, unsigned ch2) -{ - u32 reg, mask; - unsigned pressure, m1, m2; - - mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); - reg = readl(lradc->base + LRADC_CTRL1) & mask; - - while (reg != mask) { - reg = readl(lradc->base + LRADC_CTRL1) & mask; - dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg); - } - - m1 = mxs_lradc_read_raw_channel(lradc, ch1); - m2 = mxs_lradc_read_raw_channel(lradc, ch2); - - if (m2 == 0) { - dev_warn(lradc->dev, "Cannot calculate pressure\n"); - return 1 << (LRADC_RESOLUTION - 1); - } - - /* simply scale the value from 0 ... max ADC resolution */ - pressure = m1; - pressure *= (1 << LRADC_RESOLUTION); - pressure /= m2; - - dev_dbg(lradc->dev, "Pressure = %u\n", pressure); - return pressure; -} - -#define TS_CH_XP 2 -#define TS_CH_YP 3 -#define TS_CH_XM 4 -#define TS_CH_YM 5 - -/* - * YP(open)--+-------------+ - * | |--+ - * | | | - * YM(-)--+-------------+ | - * +--------------+ - * | | - * XP(weak+) XM(open) - * - * "weak+" means 200k Ohm VDDIO - * (-) means GND - */ -static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc) -{ - /* - * In order to detect a touch event the 'touch detect enable' bit - * enables: - * - a weak pullup to the X+ connector - * - a strong ground at the Y- connector - */ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), - LRADC_CTRL0); -} - -/* - * YP(meas)--+-------------+ - * | |--+ - * | | | - * YM(open)--+-------------+ | - * +--------------+ - * | | - * XP(+) XM(-) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_X; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); - mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); -} - -/* - * YP(+)--+-------------+ - * | |--+ - * | | | - * YM(-)--+-------------+ | - * +--------------+ - * | | - * XP(open) XM(meas) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_Y; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); - mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); -} - -/* - * YP(+)--+-------------+ - * | |--+ - * | | | - * YM(meas)--+-------------+ | - * +--------------+ - * | | - * XP(meas) XM(-) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_PRESSURE; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); - mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2, - TOUCHSCREEN_VCHANNEL1); -} - -static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) -{ - mxs_lradc_setup_touch_detection(lradc); - - lradc->cur_plate = LRADC_TOUCH; - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); - mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); -} - -static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, - LRADC_CTRL1); - mxs_lradc_reg_set(lradc, - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), - LRADC_CTRL1); - /* - * start with the Y-pos, because it uses nearly the same plate - * settings like the touch detection - */ - mxs_lradc_prepare_y_pos(lradc); -} - -static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) -{ - input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); - input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos); - input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure); - input_report_key(lradc->ts_input, BTN_TOUCH, 1); - input_sync(lradc->ts_input); -} - -static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) -{ - mxs_lradc_setup_touch_detection(lradc); - lradc->cur_plate = LRADC_SAMPLE_VALID; - /* - * start a dummy conversion to burn time to settle the signals - * note: we are not interested in the conversion's value - */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), - LRADC_CTRL1); - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | - LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ - LRADC_DELAY(2)); -} - -/* - * in order to avoid false measurements, report only samples where - * the surface is still touched after the position measurement - */ -static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) -{ - /* if it is still touched, report the sample */ - if (valid && mxs_lradc_check_touch_event(lradc)) { - lradc->ts_valid = true; - mxs_lradc_report_ts_event(lradc); - } - - /* if it is even still touched, continue with the next measurement */ - if (mxs_lradc_check_touch_event(lradc)) { - mxs_lradc_prepare_y_pos(lradc); - return; - } - - if (lradc->ts_valid) { - /* signal the release */ - lradc->ts_valid = false; - input_report_key(lradc->ts_input, BTN_TOUCH, 0); - input_sync(lradc->ts_input); - } - - /* if it is released, wait for the next touch via IRQ */ - lradc->cur_plate = LRADC_TOUCH; - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), - LRADC_CTRL1); - mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); -} - -/* touchscreen's state machine */ -static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) -{ - switch (lradc->cur_plate) { - case LRADC_TOUCH: - if (mxs_lradc_check_touch_event(lradc)) - mxs_lradc_start_touch_event(lradc); - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, - LRADC_CTRL1); - return; - - case LRADC_SAMPLE_Y: - lradc->ts_y_pos = - mxs_lradc_read_raw_channel(lradc, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_prepare_x_pos(lradc); - return; - - case LRADC_SAMPLE_X: - lradc->ts_x_pos = - mxs_lradc_read_raw_channel(lradc, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_prepare_pressure(lradc); - return; - - case LRADC_SAMPLE_PRESSURE: - lradc->ts_pressure = - mxs_lradc_read_ts_pressure(lradc, - TOUCHSCREEN_VCHANNEL2, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_complete_touch_event(lradc); - return; - - case LRADC_SAMPLE_VALID: - mxs_lradc_finish_touch_event(lradc, 1); - break; - } -} - -/* - * Raw I/O operations - */ -static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - int ret; - - /* - * See if there is no buffered operation in progress. If there is, simply - * bail out. This can be improved to support both buffered and raw IO at - * the same time, yet the code becomes horribly complicated. Therefore I - * applied KISS principle here. - */ - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - reinit_completion(&lradc->completion); - - /* - * No buffered operation in progress, map the channel and trigger it. - * Virtual channel 0 is always used here as the others are always not - * used if doing raw sampling. - */ - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), - LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0); - - /* Enable / disable the divider per requirement */ - if (test_bit(chan, &lradc->is_divided)) - mxs_lradc_reg_set(lradc, - 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - LRADC_CTRL2); - else - mxs_lradc_reg_clear(lradc, - 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - LRADC_CTRL2); - - /* Clean the slot's previous content, then set new one. */ - mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), - LRADC_CTRL4); - mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4); - - mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0)); - - /* Enable the IRQ and start sampling the channel. */ - mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); - mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0); - - /* Wait for completion on the channel, 1 second max. */ - ret = wait_for_completion_killable_timeout(&lradc->completion, HZ); - if (!ret) - ret = -ETIMEDOUT; - if (ret < 0) - goto err; - - /* Read the data. */ - *val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; - ret = IIO_VAL_INT; - -err: - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); - - mutex_unlock(&lradc->lock); - - return ret; -} - -static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val) -{ - int ret, min, max; - - ret = mxs_lradc_read_single(iio_dev, 8, &min); - if (ret != IIO_VAL_INT) - return ret; - - ret = mxs_lradc_read_single(iio_dev, 9, &max); - if (ret != IIO_VAL_INT) - return ret; - - *val = max - min; - - return IIO_VAL_INT; -} - -static int mxs_lradc_read_raw(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - int *val, int *val2, long m) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - - switch (m) { - case IIO_CHAN_INFO_RAW: - if (chan->type == IIO_TEMP) - return mxs_lradc_read_temp(iio_dev, val); - - return mxs_lradc_read_single(iio_dev, chan->channel, val); - - case IIO_CHAN_INFO_SCALE: - if (chan->type == IIO_TEMP) { - /* From the datasheet, we have to multiply by 1.012 and - * divide by 4 - */ - *val = 0; - *val2 = 253000; - return IIO_VAL_INT_PLUS_MICRO; - } - - *val = lradc->vref_mv[chan->channel]; - *val2 = chan->scan_type.realbits - - test_bit(chan->channel, &lradc->is_divided); - return IIO_VAL_FRACTIONAL_LOG2; - - case IIO_CHAN_INFO_OFFSET: - if (chan->type == IIO_TEMP) { - /* The calculated value from the ADC is in Kelvin, we - * want Celsius for hwmon so the offset is -273.15 - * The offset is applied before scaling so it is - * actually -213.15 * 4 / 1.012 = -1079.644268 - */ - *val = -1079; - *val2 = 644268; - - return IIO_VAL_INT_PLUS_MICRO; - } - - return -EINVAL; - - default: - break; - } - - return -EINVAL; -} - -static int mxs_lradc_write_raw(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - int val, int val2, long m) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - struct mxs_lradc_scale *scale_avail = - lradc->scale_avail[chan->channel]; - int ret; - - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - switch (m) { - case IIO_CHAN_INFO_SCALE: - ret = -EINVAL; - if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && - val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { - /* divider by two disabled */ - clear_bit(chan->channel, &lradc->is_divided); - ret = 0; - } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && - val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { - /* divider by two enabled */ - set_bit(chan->channel, &lradc->is_divided); - ret = 0; - } - - break; - default: - ret = -EINVAL; - break; - } - - mutex_unlock(&lradc->lock); - - return ret; -} - -static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - long m) -{ - return IIO_VAL_INT_PLUS_NANO; -} - -static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev, - struct device_attribute *attr, - char *buf, - int ch) -{ - struct iio_dev *iio = dev_to_iio_dev(dev); - struct mxs_lradc *lradc = iio_priv(iio); - int i, len = 0; - - for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++) - len += sprintf(buf + len, "%u.%09u ", - lradc->scale_avail[ch][i].integer, - lradc->scale_avail[ch][i].nano); - - len += sprintf(buf + len, "\n"); - - return len; -} - -static ssize_t mxs_lradc_show_scale_available(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); - - return mxs_lradc_show_scale_available_ch(dev, attr, buf, - iio_attr->address); -} - -#define SHOW_SCALE_AVAILABLE_ATTR(ch) \ -static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO, \ - mxs_lradc_show_scale_available, NULL, ch) - -SHOW_SCALE_AVAILABLE_ATTR(0); -SHOW_SCALE_AVAILABLE_ATTR(1); -SHOW_SCALE_AVAILABLE_ATTR(2); -SHOW_SCALE_AVAILABLE_ATTR(3); -SHOW_SCALE_AVAILABLE_ATTR(4); -SHOW_SCALE_AVAILABLE_ATTR(5); -SHOW_SCALE_AVAILABLE_ATTR(6); -SHOW_SCALE_AVAILABLE_ATTR(7); -SHOW_SCALE_AVAILABLE_ATTR(10); -SHOW_SCALE_AVAILABLE_ATTR(11); -SHOW_SCALE_AVAILABLE_ATTR(12); -SHOW_SCALE_AVAILABLE_ATTR(13); -SHOW_SCALE_AVAILABLE_ATTR(14); -SHOW_SCALE_AVAILABLE_ATTR(15); - -static struct attribute *mxs_lradc_attributes[] = { - &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, - NULL -}; - -static const struct attribute_group mxs_lradc_attribute_group = { - .attrs = mxs_lradc_attributes, -}; - -static const struct iio_info mxs_lradc_iio_info = { - .driver_module = THIS_MODULE, - .read_raw = mxs_lradc_read_raw, - .write_raw = mxs_lradc_write_raw, - .write_raw_get_fmt = mxs_lradc_write_raw_get_fmt, - .attrs = &mxs_lradc_attribute_group, -}; - -static int mxs_lradc_ts_open(struct input_dev *dev) -{ - struct mxs_lradc *lradc = input_get_drvdata(dev); - - /* Enable the touch-detect circuitry. */ - mxs_lradc_enable_touch_detection(lradc); - - return 0; -} - -static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) -{ - /* stop all interrupts from firing */ - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); - - /* Power-down touchscreen touch-detect circuitry. */ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); -} - -static void mxs_lradc_ts_close(struct input_dev *dev) -{ - struct mxs_lradc *lradc = input_get_drvdata(dev); - - mxs_lradc_disable_ts(lradc); -} - -static int mxs_lradc_ts_register(struct mxs_lradc *lradc) -{ - struct input_dev *input; - struct device *dev = lradc->dev; - int ret; - - if (!lradc->use_touchscreen) - return 0; - - input = input_allocate_device(); - if (!input) - return -ENOMEM; - - input->name = DRIVER_NAME; - input->id.bustype = BUS_HOST; - input->dev.parent = dev; - input->open = mxs_lradc_ts_open; - input->close = mxs_lradc_ts_close; - - __set_bit(EV_ABS, input->evbit); - __set_bit(EV_KEY, input->evbit); - __set_bit(BTN_TOUCH, input->keybit); - input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); - input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); - input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, - 0, 0); - - lradc->ts_input = input; - input_set_drvdata(input, lradc); - ret = input_register_device(input); - if (ret) - input_free_device(lradc->ts_input); - - return ret; -} - -static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc) -{ - if (!lradc->use_touchscreen) - return; - - mxs_lradc_disable_ts(lradc); - input_unregister_device(lradc->ts_input); -} - -/* - * IRQ Handling - */ -static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) -{ - struct iio_dev *iio = data; - struct mxs_lradc *lradc = iio_priv(iio); - unsigned long reg = readl(lradc->base + LRADC_CTRL1); - u32 clr_irq = mxs_lradc_irq_mask(lradc); - const u32 ts_irq_mask = - LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); - - if (!(reg & mxs_lradc_irq_mask(lradc))) - return IRQ_NONE; - - if (lradc->use_touchscreen && (reg & ts_irq_mask)) { - mxs_lradc_handle_touch(lradc); - - /* Make sure we don't clear the next conversion's interrupt. */ - clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); - } - - if (iio_buffer_enabled(iio)) { - if (reg & lradc->buffer_vchans) - iio_trigger_poll(iio->trig); - } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { - complete(&lradc->completion); - } - - mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); - - return IRQ_HANDLED; -} - -/* - * Trigger handling - */ -static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct iio_dev *iio = pf->indio_dev; - struct mxs_lradc *lradc = iio_priv(iio); - const u32 chan_value = LRADC_CH_ACCUMULATE | - ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - unsigned int i, j = 0; - - for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { - lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); - mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j)); - lradc->buffer[j] &= LRADC_CH_VALUE_MASK; - lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; - j++; - } - - iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp); - - iio_trigger_notify_done(iio->trig); - - return IRQ_HANDLED; -} - -static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state) -{ - struct iio_dev *iio = iio_trigger_get_drvdata(trig); - struct mxs_lradc *lradc = iio_priv(iio); - const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; - - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st); - - return 0; -} - -static const struct iio_trigger_ops mxs_lradc_trigger_ops = { - .owner = THIS_MODULE, - .set_trigger_state = &mxs_lradc_configure_trigger, -}; - -static int mxs_lradc_trigger_init(struct iio_dev *iio) -{ - int ret; - struct iio_trigger *trig; - struct mxs_lradc *lradc = iio_priv(iio); - - trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id); - if (!trig) - return -ENOMEM; - - trig->dev.parent = lradc->dev; - iio_trigger_set_drvdata(trig, iio); - trig->ops = &mxs_lradc_trigger_ops; - - ret = iio_trigger_register(trig); - if (ret) { - iio_trigger_free(trig); - return ret; - } - - lradc->trig = trig; - - return 0; -} - -static void mxs_lradc_trigger_remove(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - - iio_trigger_unregister(lradc->trig); - iio_trigger_free(lradc->trig); -} - -static int mxs_lradc_buffer_preenable(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - int ret = 0, chan, ofs = 0; - unsigned long enable = 0; - u32 ctrl4_set = 0; - u32 ctrl4_clr = 0; - u32 ctrl1_irq = 0; - const u32 chan_value = LRADC_CH_ACCUMULATE | - ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - const int len = bitmap_weight(iio->active_scan_mask, - LRADC_MAX_TOTAL_CHANS); - - if (!len) - return -EINVAL; - - /* - * Lock the driver so raw access can not be done during buffered - * operation. This simplifies the code a lot. - */ - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL); - if (!lradc->buffer) { - ret = -ENOMEM; - goto err_mem; - } - - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear( - lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); - - for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { - ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); - ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); - ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); - mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs)); - bitmap_set(&enable, ofs, 1); - ofs++; - } - - mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | - LRADC_DELAY_KICK, LRADC_DELAY(0)); - mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4); - mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4); - mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1); - mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, - LRADC_DELAY(0)); - - return 0; - -err_mem: - mutex_unlock(&lradc->lock); - return ret; -} - -static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - - mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | - LRADC_DELAY_KICK, LRADC_DELAY(0)); - - mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear( - lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - - kfree(lradc->buffer); - mutex_unlock(&lradc->lock); - - return 0; -} - -static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, - const unsigned long *mask) -{ - struct mxs_lradc *lradc = iio_priv(iio); - const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); - int rsvd_chans = 0; - unsigned long rsvd_mask = 0; - - if (lradc->use_touchbutton) - rsvd_mask |= CHAN_MASK_TOUCHBUTTON; - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE) - rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; - - if (lradc->use_touchbutton) - rsvd_chans++; - if (lradc->use_touchscreen) - rsvd_chans += 2; - - /* Test for attempts to map channels with special mode of operation. */ - if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) - return false; - - /* Test for attempts to map more channels then available slots. */ - if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) - return false; - - return true; -} - -static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = { - .preenable = &mxs_lradc_buffer_preenable, - .postenable = &iio_triggered_buffer_postenable, - .predisable = &iio_triggered_buffer_predisable, - .postdisable = &mxs_lradc_buffer_postdisable, - .validate_scan_mask = &mxs_lradc_validate_scan_mask, -}; - -/* - * Driver initialization - */ - -#define MXS_ADC_CHAN(idx, chan_type, name) { \ - .type = (chan_type), \ - .indexed = 1, \ - .scan_index = (idx), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_SCALE), \ - .channel = (idx), \ - .address = (idx), \ - .scan_type = { \ - .sign = 'u', \ - .realbits = LRADC_RESOLUTION, \ - .storagebits = 32, \ - }, \ - .datasheet_name = (name), \ -} - -static const struct iio_chan_spec mx23_lradc_chan_spec[] = { - MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), - MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), - MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), - MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), - MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), - MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), - MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), - MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), - /* Combined Temperature sensors */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = 8, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE), - .channel = 8, - .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, - .datasheet_name = "TEMP_DIE", - }, - /* Hidden channel to keep indexes */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = -1, - .channel = 9, - }, - MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), - MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), - MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), - MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), - MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), - MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), -}; - -static const struct iio_chan_spec mx28_lradc_chan_spec[] = { - MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), - MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), - MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), - MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), - MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), - MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), - MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), - MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), - /* Combined Temperature sensors */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = 8, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE), - .channel = 8, - .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, - .datasheet_name = "TEMP_DIE", - }, - /* Hidden channel to keep indexes */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = -1, - .channel = 9, - }, - MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), - MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), - MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), - MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), - MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), - MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), -}; - -static int mxs_lradc_hw_init(struct mxs_lradc *lradc) -{ - /* The ADC always uses DELAY CHANNEL 0. */ - const u32 adc_cfg = - (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | - (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); - - int ret = stmp_reset_block(lradc->base); - - if (ret) - return ret; - - /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ - mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); - - /* Disable remaining DELAY CHANNELs */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - - /* Configure the touchscreen type */ - if (lradc->soc == IMX28_LRADC) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - } - - /* Start internal temperature sensing. */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); - - return 0; -} - -static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) -{ - int i; - - mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1); - - for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i)); -} - -static const struct of_device_id mxs_lradc_dt_ids[] = { - { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, - { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); - -static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc, - struct device_node *lradc_node) -{ - int ret; - u32 ts_wires = 0, adapt; - - ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires", - &ts_wires); - if (ret) - return -ENODEV; /* touchscreen feature disabled */ - - switch (ts_wires) { - case 4: - lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE; - break; - case 5: - if (lradc->soc == IMX28_LRADC) { - lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE; - break; - } - /* fall through an error message for i.MX23 */ - default: - dev_err(lradc->dev, - "Unsupported number of touchscreen wires (%d)\n", - ts_wires); - return -EINVAL; - } - - if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) { - lradc->over_sample_cnt = 4; - } else { - if (adapt < 1 || adapt > 32) { - dev_err(lradc->dev, "Invalid sample count (%u)\n", - adapt); - return -EINVAL; - } - lradc->over_sample_cnt = adapt; - } - - if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) { - lradc->over_sample_delay = 2; - } else { - if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) { - dev_err(lradc->dev, "Invalid sample delay (%u)\n", - adapt); - return -EINVAL; - } - lradc->over_sample_delay = adapt; - } - - if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) { - lradc->settling_delay = 10; - } else { - if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) { - dev_err(lradc->dev, "Invalid settling delay (%u)\n", - adapt); - return -EINVAL; - } - lradc->settling_delay = adapt; - } - - return 0; -} - -static int mxs_lradc_probe(struct platform_device *pdev) -{ - const struct of_device_id *of_id = - of_match_device(mxs_lradc_dt_ids, &pdev->dev); - const struct mxs_lradc_of_config *of_cfg = - &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data]; - struct device *dev = &pdev->dev; - struct device_node *node = dev->of_node; - struct mxs_lradc *lradc; - struct iio_dev *iio; - struct resource *iores; - int ret = 0, touch_ret; - int i, s; - u64 scale_uv; - - /* Allocate the IIO device. */ - iio = devm_iio_device_alloc(dev, sizeof(*lradc)); - if (!iio) { - dev_err(dev, "Failed to allocate IIO device\n"); - return -ENOMEM; - } - - lradc = iio_priv(iio); - lradc->soc = (enum mxs_lradc_id)of_id->data; - - /* Grab the memory area */ - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - lradc->dev = &pdev->dev; - lradc->base = devm_ioremap_resource(dev, iores); - if (IS_ERR(lradc->base)) - return PTR_ERR(lradc->base); - - lradc->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(lradc->clk)) { - dev_err(dev, "Failed to get the delay unit clock\n"); - return PTR_ERR(lradc->clk); - } - ret = clk_prepare_enable(lradc->clk); - if (ret != 0) { - dev_err(dev, "Failed to enable the delay unit clock\n"); - return ret; - } - - touch_ret = mxs_lradc_probe_touchscreen(lradc, node); - - if (touch_ret == 0) - lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; - else - lradc->buffer_vchans = BUFFER_VCHANS_ALL; - - /* Grab all IRQ sources */ - for (i = 0; i < of_cfg->irq_count; i++) { - lradc->irq[i] = platform_get_irq(pdev, i); - if (lradc->irq[i] < 0) { - ret = lradc->irq[i]; - goto err_clk; - } - - ret = devm_request_irq(dev, lradc->irq[i], - mxs_lradc_handle_irq, 0, - of_cfg->irq_name[i], iio); - if (ret) - goto err_clk; - } - - lradc->vref_mv = of_cfg->vref_mv; - - platform_set_drvdata(pdev, iio); - - init_completion(&lradc->completion); - mutex_init(&lradc->lock); - - iio->name = pdev->name; - iio->dev.parent = &pdev->dev; - iio->info = &mxs_lradc_iio_info; - iio->modes = INDIO_DIRECT_MODE; - iio->masklength = LRADC_MAX_TOTAL_CHANS; - - if (lradc->soc == IMX23_LRADC) { - iio->channels = mx23_lradc_chan_spec; - iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); - } else { - iio->channels = mx28_lradc_chan_spec; - iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); - } - - ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, - &mxs_lradc_trigger_handler, - &mxs_lradc_buffer_ops); - if (ret) - goto err_clk; - - ret = mxs_lradc_trigger_init(iio); - if (ret) - goto err_trig; - - /* Populate available ADC input ranges */ - for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { - for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) { - /* - * [s=0] = optional divider by two disabled (default) - * [s=1] = optional divider by two enabled - * - * The scale is calculated by doing: - * Vref >> (realbits - s) - * which multiplies by two on the second component - * of the array. - */ - scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >> - (LRADC_RESOLUTION - s); - lradc->scale_avail[i][s].nano = - do_div(scale_uv, 100000000) * 10; - lradc->scale_avail[i][s].integer = scale_uv; - } - } - - /* Configure the hardware. */ - ret = mxs_lradc_hw_init(lradc); - if (ret) - goto err_dev; - - /* Register the touchscreen input device. */ - if (touch_ret == 0) { - ret = mxs_lradc_ts_register(lradc); - if (ret) - goto err_ts_register; - } - - /* Register IIO device. */ - ret = iio_device_register(iio); - if (ret) { - dev_err(dev, "Failed to register IIO device\n"); - goto err_ts; - } - - return 0; - -err_ts: - mxs_lradc_ts_unregister(lradc); -err_ts_register: - mxs_lradc_hw_stop(lradc); -err_dev: - mxs_lradc_trigger_remove(iio); -err_trig: - iio_triggered_buffer_cleanup(iio); -err_clk: - clk_disable_unprepare(lradc->clk); - return ret; -} - -static int mxs_lradc_remove(struct platform_device *pdev) -{ - struct iio_dev *iio = platform_get_drvdata(pdev); - struct mxs_lradc *lradc = iio_priv(iio); - - iio_device_unregister(iio); - mxs_lradc_ts_unregister(lradc); - mxs_lradc_hw_stop(lradc); - mxs_lradc_trigger_remove(iio); - iio_triggered_buffer_cleanup(iio); - - clk_disable_unprepare(lradc->clk); - return 0; -} - -static struct platform_driver mxs_lradc_driver = { - .driver = { - .name = DRIVER_NAME, - .of_match_table = mxs_lradc_dt_ids, - }, - .probe = mxs_lradc_probe, - .remove = mxs_lradc_remove, -}; - -module_platform_driver(mxs_lradc_driver); - -MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); -MODULE_DESCRIPTION("Freescale MXS LRADC driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c index 712cae0..f2c0065 100644 --- a/drivers/staging/iio/adc/spear_adc.c +++ b/drivers/staging/iio/adc/spear_adc.c @@ -288,7 +288,7 @@ static int spear_adc_probe(struct platform_device *pdev) st->adc_base_spear3xx = (struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx; - st->clk = clk_get(dev, NULL); + st->clk = devm_clk_get(dev, NULL); if (IS_ERR(st->clk)) { dev_err(dev, "failed getting clock\n"); goto errout1; @@ -297,28 +297,28 @@ static int spear_adc_probe(struct platform_device *pdev) ret = clk_prepare_enable(st->clk); if (ret) { dev_err(dev, "failed enabling clock\n"); - goto errout2; + goto errout1; } irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(dev, "failed getting interrupt resource\n"); ret = -EINVAL; - goto errout3; + goto errout2; } ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME, st); if (ret < 0) { dev_err(dev, "failed requesting interrupt\n"); - goto errout3; + goto errout2; } if (of_property_read_u32(np, "sampling-frequency", &st->sampling_freq)) { dev_err(dev, "sampling-frequency missing in DT\n"); ret = -EINVAL; - goto errout3; + goto errout2; } /* @@ -348,16 +348,14 @@ static int spear_adc_probe(struct platform_device *pdev) ret = iio_device_register(indio_dev); if (ret) - goto errout3; + goto errout2; dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq); return 0; -errout3: - clk_disable_unprepare(st->clk); errout2: - clk_put(st->clk); + clk_disable_unprepare(st->clk); errout1: iounmap(st->adc_base_spear6xx); return ret; @@ -370,7 +368,6 @@ static int spear_adc_remove(struct platform_device *pdev) iio_device_unregister(indio_dev); clk_disable_unprepare(st->clk); - clk_put(st->clk); iounmap(st->adc_base_spear6xx); return 0; diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c index e8d0ff2..f6b9a10 100644 --- a/drivers/staging/iio/cdc/ad7150.c +++ b/drivers/staging/iio/cdc/ad7150.c @@ -21,8 +21,8 @@ */ #define AD7150_STATUS 0 -#define AD7150_STATUS_OUT1 (1 << 3) -#define AD7150_STATUS_OUT2 (1 << 5) +#define AD7150_STATUS_OUT1 BIT(3) +#define AD7150_STATUS_OUT2 BIT(5) #define AD7150_CH1_DATA_HIGH 1 #define AD7150_CH2_DATA_HIGH 3 #define AD7150_CH1_AVG_HIGH 5 @@ -36,7 +36,7 @@ #define AD7150_CH2_TIMEOUT 13 #define AD7150_CH2_SETUP 14 #define AD7150_CFG 15 -#define AD7150_CFG_FIX (1 << 7) +#define AD7150_CFG_FIX BIT(7) #define AD7150_PD_TIMER 16 #define AD7150_CH1_CAPDAC 17 #define AD7150_CH2_CAPDAC 18 @@ -160,8 +160,9 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev, /* lock should be held */ static int ad7150_write_event_params(struct iio_dev *indio_dev, - unsigned int chan, enum iio_event_type type, - enum iio_event_direction dir) + unsigned int chan, + enum iio_event_type type, + enum iio_event_direction dir) { int ret; u16 value; @@ -209,8 +210,9 @@ static int ad7150_write_event_params(struct iio_dev *indio_dev, } static int ad7150_write_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, enum iio_event_type type, - enum iio_event_direction dir, int state) + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, int state) { u8 thresh_type, cfg, adaptive; int ret; @@ -302,11 +304,11 @@ static int ad7150_read_event_value(struct iio_dev *indio_dev, } static int ad7150_write_event_value(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int val, int val2) + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) { int ret; struct ad7150_chip_info *chip = iio_priv(indio_dev); @@ -365,9 +367,9 @@ static ssize_t ad7150_show_timeout(struct device *dev, } static ssize_t ad7150_store_timeout(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) + struct device_attribute *attr, + const char *buf, + size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7150_chip_info *chip = iio_priv(indio_dev); @@ -580,7 +582,7 @@ static const struct iio_info ad7150_info = { */ static int ad7150_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { int ret; struct ad7150_chip_info *chip; diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c index 2c5d277..5771d4ee 100644 --- a/drivers/staging/iio/cdc/ad7746.c +++ b/drivers/staging/iio/cdc/ad7746.c @@ -529,8 +529,8 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, val /= 338646; - chip->capdac[chan->channel][chan->differential] = (val > 0 ? - AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0); + chip->capdac[chan->channel][chan->differential] = val > 0 ? + AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0; ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CAPDACA, diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 10c43dda..d1218d8 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -558,7 +558,7 @@ out: } static const struct iio_info ad5933_info = { - .read_raw = &ad5933_read_raw, + .read_raw = ad5933_read_raw, .attrs = &ad5933_attribute_group, .driver_module = THIS_MODULE, }; @@ -616,9 +616,9 @@ static int ad5933_ring_postdisable(struct iio_dev *indio_dev) } static const struct iio_buffer_setup_ops ad5933_ring_setup_ops = { - .preenable = &ad5933_ring_preenable, - .postenable = &ad5933_ring_postenable, - .postdisable = &ad5933_ring_postdisable, + .preenable = ad5933_ring_preenable, + .postenable = ad5933_ring_postenable, + .postdisable = ad5933_ring_postdisable, }; static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev) diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c index bbf7e35..03dbfb6 100644 --- a/drivers/staging/iio/light/isl29018.c +++ b/drivers/staging/iio/light/isl29018.c @@ -183,7 +183,7 @@ static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode) /* Set mode */ status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, - mode << COMMMAND1_OPMODE_SHIFT); + mode << COMMMAND1_OPMODE_SHIFT); if (status) { dev_err(chip->dev, "Error in setting operating mode err %d\n", status); @@ -241,7 +241,7 @@ static int isl29018_read_ir(struct isl29018_chip *chip, int *ir) } static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme, - int *near_ir) + int *near_ir) { int status; int prox_data = -1; @@ -249,15 +249,15 @@ static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme, /* Do proximity sensing with required scheme */ status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII, - COMMANDII_SCHEME_MASK, - scheme << COMMANDII_SCHEME_SHIFT); + COMMANDII_SCHEME_MASK, + scheme << COMMANDII_SCHEME_SHIFT); if (status) { dev_err(chip->dev, "Error in setting operating mode\n"); return status; } prox_data = isl29018_read_sensor_input(chip, - COMMMAND1_OPMODE_PROX_ONCE); + COMMMAND1_OPMODE_PROX_ONCE); if (prox_data < 0) return prox_data; @@ -280,7 +280,7 @@ static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme, } static ssize_t show_scale_available(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct isl29018_chip *chip = iio_priv(indio_dev); @@ -297,7 +297,7 @@ static ssize_t show_scale_available(struct device *dev, } static ssize_t show_int_time_available(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct isl29018_chip *chip = iio_priv(indio_dev); @@ -314,18 +314,22 @@ static ssize_t show_int_time_available(struct device *dev, /* proximity scheme */ static ssize_t show_prox_infrared_suppression(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, + char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct isl29018_chip *chip = iio_priv(indio_dev); - /* return the "proximity scheme" i.e. if the chip does on chip - infrared suppression (1 means perform on chip suppression) */ + /* + * return the "proximity scheme" i.e. if the chip does on chip + * infrared suppression (1 means perform on chip suppression) + */ return sprintf(buf, "%d\n", chip->prox_scheme); } static ssize_t store_prox_infrared_suppression(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) + struct device_attribute *attr, + const char *buf, size_t count) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct isl29018_chip *chip = iio_priv(indio_dev); @@ -338,8 +342,10 @@ static ssize_t store_prox_infrared_suppression(struct device *dev, return -EINVAL; } - /* get the "proximity scheme" i.e. if the chip does on chip - infrared suppression (1 means perform on chip suppression) */ + /* + * get the "proximity scheme" i.e. if the chip does on chip + * infrared suppression (1 means perform on chip suppression) + */ mutex_lock(&chip->lock); chip->prox_scheme = val; mutex_unlock(&chip->lock); @@ -413,7 +419,8 @@ static int isl29018_read_raw(struct iio_dev *indio_dev, break; case IIO_PROXIMITY: ret = isl29018_read_proximity_ir(chip, - chip->prox_scheme, val); + chip->prox_scheme, + val); break; default: break; @@ -614,15 +621,15 @@ static int isl29018_chip_init(struct isl29018_chip *chip) static const struct iio_info isl29018_info = { .attrs = &isl29018_group, .driver_module = THIS_MODULE, - .read_raw = &isl29018_read_raw, - .write_raw = &isl29018_write_raw, + .read_raw = isl29018_read_raw, + .write_raw = isl29018_write_raw, }; static const struct iio_info isl29023_info = { .attrs = &isl29023_group, .driver_module = THIS_MODULE, - .read_raw = &isl29018_read_raw, - .write_raw = &isl29018_write_raw, + .read_raw = isl29018_read_raw, + .write_raw = isl29018_write_raw, }; static bool is_volatile_reg(struct device *dev, unsigned int reg) @@ -699,13 +706,13 @@ static const char *isl29018_match_acpi_device(struct device *dev, int *data) if (!id) return NULL; - *data = (int) id->driver_data; + *data = (int)id->driver_data; return dev_name(dev); } static int isl29018_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct isl29018_chip *chip; struct iio_dev *indio_dev; diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c index 32ae112..6e2ba45 100644 --- a/drivers/staging/iio/light/isl29028.c +++ b/drivers/staging/iio/light/isl29028.c @@ -81,7 +81,7 @@ struct isl29028_chip { }; static int isl29028_set_proxim_sampling(struct isl29028_chip *chip, - unsigned int sampling) + unsigned int sampling) { static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0}; int sel; @@ -103,7 +103,7 @@ static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable) if (enable) val = CONFIGURE_PROX_EN; ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, - CONFIGURE_PROX_EN_MASK, val); + CONFIGURE_PROX_EN_MASK, val); if (ret < 0) return ret; @@ -122,24 +122,27 @@ static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale) } static int isl29028_set_als_ir_mode(struct isl29028_chip *chip, - enum als_ir_mode mode) + enum als_ir_mode mode) { int ret = 0; switch (mode) { case MODE_ALS: ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, - CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS); + CONFIGURE_ALS_IR_MODE_MASK, + CONFIGURE_ALS_IR_MODE_ALS); if (ret < 0) return ret; ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, - CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX); + CONFIGURE_ALS_RANGE_MASK, + CONFIGURE_ALS_RANGE_HIGH_LUX); break; case MODE_IR: ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, - CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR); + CONFIGURE_ALS_IR_MODE_MASK, + CONFIGURE_ALS_IR_MODE_IR); break; case MODE_NONE: @@ -152,7 +155,7 @@ static int isl29028_set_als_ir_mode(struct isl29028_chip *chip, /* Enable the ALS/IR */ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE, - CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN); + CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN); if (ret < 0) return ret; @@ -193,7 +196,7 @@ static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox) ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data); if (ret < 0) { dev_err(chip->dev, "Error in reading register %d, error %d\n", - ISL29028_REG_PROX_DATA, ret); + ISL29028_REG_PROX_DATA, ret); return ret; } *prox = data; @@ -264,7 +267,8 @@ static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data) /* Channel IO */ static int isl29028_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, int val, int val2, long mask) + struct iio_chan_spec const *chan, + int val, int val2, long mask) { struct isl29028_chip *chip = iio_priv(indio_dev); int ret = -EINVAL; @@ -323,7 +327,8 @@ static int isl29028_write_raw(struct iio_dev *indio_dev, } static int isl29028_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, int *val, int *val2, long mask) + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) { struct isl29028_chip *chip = iio_priv(indio_dev); int ret = -EINVAL; @@ -406,8 +411,8 @@ static const struct iio_chan_spec isl29028_channels[] = { static const struct iio_info isl29028_info = { .attrs = &isl29108_group, .driver_module = THIS_MODULE, - .read_raw = &isl29028_read_raw, - .write_raw = &isl29028_write_raw, + .read_raw = isl29028_read_raw, + .write_raw = isl29028_write_raw, }; static int isl29028_chip_init(struct isl29028_chip *chip) @@ -476,7 +481,7 @@ static const struct regmap_config isl29028_regmap_config = { }; static int isl29028_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct isl29028_chip *chip; struct iio_dev *indio_dev; diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c index 3100d96..05b4ad4 100644 --- a/drivers/staging/iio/light/tsl2583.c +++ b/drivers/staging/iio/light/tsl2583.c @@ -240,8 +240,10 @@ static int taos_get_lux(struct iio_dev *indio_dev) } } - /* clear status, really interrupt status (interrupts are off), but - * we use the bit anyway - don't forget 0x80 - this is a command*/ + /* + * clear status, really interrupt status (interrupts are off), but + * we use the bit anyway - don't forget 0x80 - this is a command + */ ret = i2c_smbus_write_byte(chip->client, (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN | TSL258X_CMD_ALS_INT_CLR)); @@ -265,13 +267,14 @@ static int taos_get_lux(struct iio_dev *indio_dev) if (!ch0) { /* have no data, so return LAST VALUE */ - ret = chip->als_cur_info.lux = 0; + ret = 0; + chip->als_cur_info.lux = 0; goto out_unlock; } /* calculate ratio */ ratio = (ch1 << 15) / ch0; /* convert to unscaled lux using the pointer to the table */ - for (p = (struct taos_lux *) taos_device_lux; + for (p = (struct taos_lux *)taos_device_lux; p->ratio != 0 && p->ratio < ratio; p++) ; @@ -290,7 +293,8 @@ static int taos_get_lux(struct iio_dev *indio_dev) /* note: lux is 31 bit max at this point */ if (ch1lux > ch0lux) { dev_dbg(&chip->client->dev, "No Data - Return last value\n"); - ret = chip->als_cur_info.lux = 0; + ret = 0; + chip->als_cur_info.lux = 0; goto out_unlock; } @@ -378,7 +382,7 @@ static int taos_als_calibrate(struct iio_dev *indio_dev) dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n"); return lux_val; } - gain_trim_val = (unsigned int) (((chip->taos_settings.als_cal_target) + gain_trim_val = (unsigned int)(((chip->taos_settings.als_cal_target) * chip->taos_settings.als_gain_trim) / lux_val); if ((gain_trim_val < 250) || (gain_trim_val > 4000)) { @@ -387,9 +391,9 @@ static int taos_als_calibrate(struct iio_dev *indio_dev) gain_trim_val); return -ENODATA; } - chip->taos_settings.als_gain_trim = (int) gain_trim_val; + chip->taos_settings.als_gain_trim = (int)gain_trim_val; - return (int) gain_trim_val; + return (int)gain_trim_val; } /* @@ -429,8 +433,10 @@ static int taos_chip_on(struct iio_dev *indio_dev) chip->als_saturation = als_count * 922; /* 90% of full scale */ chip->als_time_scale = (als_time + 25) / 50; - /* TSL258x Specific power-on / adc enable sequence - * Power on the device 1st. */ + /* + * TSL258x Specific power-on / adc enable sequence + * Power on the device 1st. + */ utmp = TSL258X_CNTL_PWR_ON; ret = i2c_smbus_write_byte_data(chip->client, TSL258X_CMD_REG | TSL258X_CNTRL, utmp); @@ -439,8 +445,10 @@ static int taos_chip_on(struct iio_dev *indio_dev) return ret; } - /* Use the following shadow copy for our delay before enabling ADC. - * Write all the registers. */ + /* + * Use the following shadow copy for our delay before enabling ADC. + * Write all the registers. + */ for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) { ret = i2c_smbus_write_byte_data(chip->client, TSL258X_CMD_REG + i, @@ -453,8 +461,10 @@ static int taos_chip_on(struct iio_dev *indio_dev) } usleep_range(3000, 3500); - /* NOW enable the ADC - * initialize the desired mode of operation */ + /* + * NOW enable the ADC + * initialize the desired mode of operation + */ utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL; ret = i2c_smbus_write_byte_data(chip->client, TSL258X_CMD_REG | TSL258X_CNTRL, @@ -482,7 +492,7 @@ static int taos_chip_off(struct iio_dev *indio_dev) /* Sysfs Interface Functions */ static ssize_t taos_power_state_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -491,7 +501,8 @@ static ssize_t taos_power_state_show(struct device *dev, } static ssize_t taos_power_state_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); int value; @@ -508,7 +519,7 @@ static ssize_t taos_power_state_store(struct device *dev, } static ssize_t taos_gain_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -533,7 +544,8 @@ static ssize_t taos_gain_show(struct device *dev, } static ssize_t taos_gain_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -564,13 +576,14 @@ static ssize_t taos_gain_store(struct device *dev, } static ssize_t taos_gain_available_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, + char *buf) { return sprintf(buf, "%s\n", "1 8 16 111"); } static ssize_t taos_als_time_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -579,7 +592,8 @@ static ssize_t taos_als_time_show(struct device *dev, } static ssize_t taos_als_time_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -600,14 +614,15 @@ static ssize_t taos_als_time_store(struct device *dev, } static ssize_t taos_als_time_available_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, + char *buf) { return sprintf(buf, "%s\n", "50 100 150 200 250 300 350 400 450 500 550 600 650"); } static ssize_t taos_als_trim_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -616,7 +631,8 @@ static ssize_t taos_als_trim_show(struct device *dev, } static ssize_t taos_als_trim_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -632,7 +648,8 @@ static ssize_t taos_als_trim_store(struct device *dev, } static ssize_t taos_als_cal_target_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, + char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -641,7 +658,8 @@ static ssize_t taos_als_cal_target_show(struct device *dev, } static ssize_t taos_als_cal_target_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); @@ -657,7 +675,7 @@ static ssize_t taos_als_cal_target_store(struct device *dev, } static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr, - char *buf) + char *buf) { int ret; @@ -669,7 +687,8 @@ static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr, } static ssize_t taos_do_calibrate(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); int value; @@ -684,7 +703,7 @@ static ssize_t taos_do_calibrate(struct device *dev, } static ssize_t taos_luxtable_show(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { int i; int offset = 0; @@ -695,8 +714,10 @@ static ssize_t taos_luxtable_show(struct device *dev, taos_device_lux[i].ch0, taos_device_lux[i].ch1); if (taos_device_lux[i].ratio == 0) { - /* We just printed the first "0" entry. - * Now get rid of the extra "," and break. */ + /* + * We just printed the first "0" entry. + * Now get rid of the extra "," and break. + */ offset--; break; } @@ -707,11 +728,12 @@ static ssize_t taos_luxtable_show(struct device *dev, } static ssize_t taos_luxtable_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct tsl2583_chip *chip = iio_priv(indio_dev); - int value[ARRAY_SIZE(taos_device_lux)*3 + 1]; + int value[ARRAY_SIZE(taos_device_lux) * 3 + 1]; int n; get_options(buf, ARRAY_SIZE(value), value); @@ -809,7 +831,7 @@ static int taos_probe(struct i2c_client *clientp, struct iio_dev *indio_dev; if (!i2c_check_functionality(clientp->adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { + I2C_FUNC_SMBUS_BYTE_DATA)) { dev_err(&clientp->dev, "taos_probe() - i2c smbus byte data func unsupported\n"); return -EOPNOTSUPP; } @@ -846,7 +868,7 @@ static int taos_probe(struct i2c_client *clientp, if (!taos_tsl258x_device(buf)) { dev_info(&clientp->dev, - "i2c device found but does not match expected id in taos_probe()\n"); + "i2c device found but does not match expected id in taos_probe()\n"); return -EINVAL; } diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c index 5b1c165..2a62718 100644 --- a/drivers/staging/iio/light/tsl2x7x_core.c +++ b/drivers/staging/iio/light/tsl2x7x_core.c @@ -687,9 +687,9 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev) /* Set the gain based on tsl2x7x_settings struct */ chip->tsl2x7x_config[TSL2X7X_GAIN] = - (chip->tsl2x7x_settings.als_gain | + chip->tsl2x7x_settings.als_gain | (TSL2X7X_mA100 | TSL2X7X_DIODE1) - | ((chip->tsl2x7x_settings.prox_gain) << 2)); + | ((chip->tsl2x7x_settings.prox_gain) << 2); /* set chip struct re scaling and saturation */ chip->als_saturation = als_count * 922; /* 90% of full scale */ @@ -983,7 +983,7 @@ static ssize_t tsl2x7x_als_time_store(struct device *dev, result.fract /= 3; chip->tsl2x7x_settings.als_time = - (TSL2X7X_MAX_TIMER_CNT - (u8)result.fract); + TSL2X7X_MAX_TIMER_CNT - (u8)result.fract; dev_info(&chip->client->dev, "%s: als time = %d", __func__, chip->tsl2x7x_settings.als_time); diff --git a/drivers/staging/iio/magnetometer/hmc5843.h b/drivers/staging/iio/magnetometer/hmc5843.h index 06f35d3..76a5d74 100644 --- a/drivers/staging/iio/magnetometer/hmc5843.h +++ b/drivers/staging/iio/magnetometer/hmc5843.h @@ -7,8 +7,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * */ + */ #ifndef HMC5843_CORE_H #define HMC5843_CORE_H @@ -38,7 +37,7 @@ enum hmc5843_ids { * @regmap: hardware access register maps * @variant: describe chip variants * @buffer: 3x 16-bit channels + padding + 64-bit timestamp - **/ + */ struct hmc5843_data { struct device *dev; struct mutex lock; diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c index 394bc14..9ee9a42 100644 --- a/drivers/staging/iio/magnetometer/hmc5843_core.c +++ b/drivers/staging/iio/magnetometer/hmc5843_core.c @@ -554,9 +554,9 @@ static int hmc5843_init(struct hmc5843_data *data) static const struct iio_info hmc5843_info = { .attrs = &hmc5843_group, - .read_raw = &hmc5843_read_raw, - .write_raw = &hmc5843_write_raw, - .write_raw_get_fmt = &hmc5843_write_raw_get_fmt, + .read_raw = hmc5843_read_raw, + .write_raw = hmc5843_write_raw, + .write_raw_get_fmt = hmc5843_write_raw_get_fmt, .driver_module = THIS_MODULE, }; @@ -565,14 +565,14 @@ static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; int hmc5843_common_suspend(struct device *dev) { return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), - HMC5843_MODE_CONVERSION_CONTINUOUS); + HMC5843_MODE_SLEEP); } EXPORT_SYMBOL(hmc5843_common_suspend); int hmc5843_common_resume(struct device *dev) { return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), - HMC5843_MODE_SLEEP); + HMC5843_MODE_CONVERSION_CONTINUOUS); } EXPORT_SYMBOL(hmc5843_common_resume); diff --git a/drivers/staging/iio/magnetometer/hmc5843_i2c.c b/drivers/staging/iio/magnetometer/hmc5843_i2c.c index 3e06ceb..3de7f44 100644 --- a/drivers/staging/iio/magnetometer/hmc5843_i2c.c +++ b/drivers/staging/iio/magnetometer/hmc5843_i2c.c @@ -7,8 +7,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * */ + */ #include <linux/module.h> #include <linux/i2c.h> diff --git a/drivers/staging/iio/magnetometer/hmc5843_spi.c b/drivers/staging/iio/magnetometer/hmc5843_spi.c index 8be1980..535f03a 100644 --- a/drivers/staging/iio/magnetometer/hmc5843_spi.c +++ b/drivers/staging/iio/magnetometer/hmc5843_spi.c @@ -6,8 +6,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * */ + */ #include <linux/module.h> #include <linux/spi/spi.h> diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c index 595e711..82b2d88 100644 --- a/drivers/staging/iio/resolver/ad2s1200.c +++ b/drivers/staging/iio/resolver/ad2s1200.c @@ -31,7 +31,7 @@ /* input clock on serial interface */ #define AD2S1200_HZ 8192000 /* clock period in nano second */ -#define AD2S1200_TSCLK (1000000000/AD2S1200_HZ) +#define AD2S1200_TSCLK (1000000000 / AD2S1200_HZ) struct ad2s1200_state { struct mutex lock; @@ -42,10 +42,10 @@ struct ad2s1200_state { }; static int ad2s1200_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long m) + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) { int ret = 0; s16 vel; @@ -113,7 +113,7 @@ static int ad2s1200_probe(struct spi_device *spi) DRV_NAME); if (ret) { dev_err(&spi->dev, "request gpio pin %d failed\n", - pins[pn]); + pins[pn]); return ret; } } diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c index d97aa28..6b99263 100644 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -67,7 +67,7 @@ /* default input clock on serial interface */ #define AD2S1210_DEF_CLKIN 8192000 /* clock period in nano second */ -#define AD2S1210_DEF_TCK (1000000000/AD2S1210_DEF_CLKIN) +#define AD2S1210_DEF_TCK (1000000000 / AD2S1210_DEF_CLKIN) #define AD2S1210_DEF_EXCIT 10000 enum ad2s1210_mode { @@ -98,6 +98,7 @@ static const int ad2s1210_mode_vals[4][2] = { [MOD_VEL] = { 0, 1 }, [MOD_CONFIG] = { 1, 0 }, }; + static inline void ad2s1210_set_mode(enum ad2s1210_mode mode, struct ad2s1210_state *st) { @@ -123,7 +124,7 @@ static int ad2s1210_config_write(struct ad2s1210_state *st, u8 data) /* read value from one of the registers */ static int ad2s1210_config_read(struct ad2s1210_state *st, - unsigned char address) + unsigned char address) { struct spi_transfer xfer = { .len = 2, @@ -176,9 +177,9 @@ static const int ad2s1210_res_pins[4][2] = { static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st) { gpio_set_value(st->pdata->res[0], - ad2s1210_res_pins[(st->resolution - 10)/2][0]); + ad2s1210_res_pins[(st->resolution - 10) / 2][0]); gpio_set_value(st->pdata->res[1], - ad2s1210_res_pins[(st->resolution - 10)/2][1]); + ad2s1210_res_pins[(st->resolution - 10) / 2][1]); } static inline int ad2s1210_soft_reset(struct ad2s1210_state *st) @@ -282,8 +283,8 @@ static ssize_t ad2s1210_show_control(struct device *dev, } static ssize_t ad2s1210_store_control(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); unsigned char udata; @@ -318,9 +319,9 @@ static ssize_t ad2s1210_store_control(struct device *dev, data = ad2s1210_read_resolution_pin(st); if (data != st->resolution) dev_warn(dev, "ad2s1210: resolution settings not match\n"); - } else + } else { ad2s1210_set_resolution_pin(st); - + } ret = len; st->hysteresis = !!(data & AD2S1210_ENABLE_HYSTERESIS); @@ -330,7 +331,8 @@ error_ret: } static ssize_t ad2s1210_show_resolution(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, + char *buf) { struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); @@ -338,8 +340,8 @@ static ssize_t ad2s1210_show_resolution(struct device *dev, } static ssize_t ad2s1210_store_resolution(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); unsigned char data; @@ -379,8 +381,9 @@ static ssize_t ad2s1210_store_resolution(struct device *dev, data = ad2s1210_read_resolution_pin(st); if (data != st->resolution) dev_warn(dev, "ad2s1210: resolution settings not match\n"); - } else + } else { ad2s1210_set_resolution_pin(st); + } ret = len; error_ret: mutex_unlock(&st->lock); @@ -389,7 +392,7 @@ error_ret: /* read the fault register since last sample */ static ssize_t ad2s1210_show_fault(struct device *dev, - struct device_attribute *attr, char *buf) + struct device_attribute *attr, char *buf) { struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); int ret; @@ -441,7 +444,8 @@ static ssize_t ad2s1210_show_reg(struct device *dev, } static ssize_t ad2s1210_store_reg(struct device *dev, - struct device_attribute *attr, const char *buf, size_t len) + struct device_attribute *attr, + const char *buf, size_t len) { struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); unsigned char data; @@ -497,7 +501,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ANGL: - pos = be16_to_cpup((__be16 *) st->rx); + pos = be16_to_cpup((__be16 *)st->rx); if (st->hysteresis) pos >>= 16 - st->resolution; *val = pos; @@ -505,7 +509,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev, break; case IIO_ANGL_VEL: negative = st->rx[0] & 0x80; - vel = be16_to_cpup((__be16 *) st->rx); + vel = be16_to_cpup((__be16 *)st->rx); vel >>= 16 - st->resolution; if (vel & 0x8000) { negative = (0xffff >> st->resolution) << st->resolution; @@ -560,7 +564,6 @@ static IIO_DEVICE_ATTR(lot_low_thrd, S_IRUGO | S_IWUSR, ad2s1210_show_reg, ad2s1210_store_reg, AD2S1210_REG_LOT_LOW_THRD); - static const struct iio_chan_spec ad2s1210_channels[] = { { .type = IIO_ANGL, @@ -672,7 +675,7 @@ static int ad2s1210_probe(struct spi_device *spi) struct ad2s1210_state *st; int ret; - if (spi->dev.platform_data == NULL) + if (!spi->dev.platform_data) return -EINVAL; indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |