3 files changed, 16 insertions, 6 deletions
diff --git a/drivers/staging/media/lirc/lirc_bt829.c b/drivers/staging/media/lirc/lirc_bt829.c
index fa31ee7..fbbdce4 100644
--- a/drivers/staging/media/lirc/lirc_bt829.c
+++ b/drivers/staging/media/lirc/lirc_bt829.c
@@ -132,7 +132,7 @@ int init_module(void)
 	atir_driver.minor       = -1;
 	atir_driver.code_length = 8;
 	atir_driver.sample_rate = 10;
-	atir_driver.data        = 0;
+	atir_driver.data        = NULL;
 	atir_driver.add_to_buf  = atir_add_to_buf;
 	atir_driver.set_use_inc = atir_set_use_inc;
 	atir_driver.set_use_dec = atir_set_use_dec;
@@ -159,7 +159,7 @@ void cleanup_module(void)
 static int atir_init_start(void)
 {
 	pci_addr_lin = ioremap(pci_addr_phys + DATA_PCI_OFF, 0x400);
-	if (pci_addr_lin == 0) {
+	if (!pci_addr_lin) {
 		pr_info("pci mem must be mapped\n");
 		return 0;
 	}
diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c
index 4afa7da..ab2ae11 100644
--- a/drivers/staging/media/lirc/lirc_imon.c
+++ b/drivers/staging/media/lirc/lirc_imon.c
@@ -625,7 +625,7 @@ static void imon_incoming_packet(struct imon_context *context,
 	}
 
 	if (debug) {
-		printk(KERN_INFO "raw packet: ");
+		dev_info(dev, "raw packet: ");
 		for (i = 0; i < len; ++i)
 			printk("%02x ", buf[i]);
 		printk("\n");
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index af08e67..f6bc4c9 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -67,7 +67,7 @@
 #include <linux/delay.h>
 #include <linux/poll.h>
 #include <linux/platform_device.h>
-
+#include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/fcntl.h>
@@ -321,7 +321,7 @@ static void on(void)
 	 * status LED and ground
 	 */
 	if (type == LIRC_NSLU2) {
-		gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_LOW);
+		gpio_set_value(NSLU2_LED_GRN, 0);
 		return;
 	}
 #endif
@@ -335,7 +335,7 @@ static void off(void)
 {
 #ifdef CONFIG_LIRC_SERIAL_NSLU2
 	if (type == LIRC_NSLU2) {
-		gpio_line_set(NSLU2_LED_GRN, IXP4XX_GPIO_HIGH);
+		gpio_set_value(NSLU2_LED_GRN, 1);
 		return;
 	}
 #endif
@@ -839,6 +839,16 @@ static int lirc_serial_probe(struct platform_device *dev)
 {
 	int i, nlow, nhigh, result;
 
+#ifdef CONFIG_LIRC_SERIAL_NSLU2
+	/* This GPIO is used for a LED on the NSLU2 */
+	result = devm_gpio_request(dev, NSLU2_LED_GRN, "lirc-serial");
+	if (result)
+		return result;
+	result = gpio_direction_output(NSLU2_LED_GRN, 0);
+	if (result)
+		return result;
+#endif
+
 	result = request_irq(irq, irq_handler,
 			     (share_irq ? IRQF_SHARED : 0),
 			     LIRC_DRIVER_NAME, (void *)&hardware);