diff options
Diffstat (limited to 'drivers/staging/rtl8192su/r8192U.h')
-rw-r--r-- | drivers/staging/rtl8192su/r8192U.h | 1519 |
1 files changed, 0 insertions, 1519 deletions
diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h deleted file mode 100644 index 741c6bf..0000000 --- a/drivers/staging/rtl8192su/r8192U.h +++ /dev/null @@ -1,1519 +0,0 @@ -/****************************************************************************** - * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved. - * Linux device driver for RTL8192U - * - * Based on the r8187 driver, which is: - * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al. - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * wlanfae <wlanfae@realtek.com> -******************************************************************************/ - -#ifndef R819xU_H -#define R819xU_H - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/netdevice.h> -#include <linux/usb.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> -#include <linux/rtnetlink.h> //for rtnl_lock() -#include <linux/wireless.h> -#include <linux/timer.h> -#include <linux/proc_fs.h> // Necessary because we use the proc fs -#include <linux/if_arp.h> -#include <linux/random.h> -#include <linux/version.h> -#include <asm/io.h> - -#include "ieee80211/ieee80211.h" - -#include "r8192S_firmware.h" -#include "r8192SU_led.h" - -/* EEPROM defs for use with linux/eeprom_93cx6.h */ -#define RTL819X_EEPROM_CMD_READ (1 << 0) -#define RTL819X_EEPROM_CMD_WRITE (1 << 1) -#define RTL819X_EEPROM_CMD_CK (1 << 2) -#define RTL819X_EEPROM_CMD_CS (1 << 3) - -#define RTL819xU_MODULE_NAME "rtl819xU" -#define FALSE 0 -#define TRUE 1 -#define MAX_KEY_LEN 61 -#define KEY_BUF_SIZE 5 - -#define BIT0 0x00000001 -#define BIT1 0x00000002 -#define BIT2 0x00000004 -#define BIT3 0x00000008 -#define BIT4 0x00000010 -#define BIT5 0x00000020 -#define BIT6 0x00000040 -#define BIT7 0x00000080 -#define BIT8 0x00000100 -#define BIT9 0x00000200 -#define BIT10 0x00000400 -#define BIT11 0x00000800 -#define BIT12 0x00001000 -#define BIT13 0x00002000 -#define BIT14 0x00004000 -#define BIT15 0x00008000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - -// Rx smooth factor -#define Rx_Smooth_Factor 20 -#define DMESG(x,a...) -#define DMESGW(x,a...) -#define DMESGE(x,a...) -extern u32 rt_global_debug_component; -#define RT_TRACE(component, x, args...) \ -do { if(rt_global_debug_component & component) \ - printk(KERN_DEBUG RTL819xU_MODULE_NAME ":" x "\n" , \ - ##args);\ -}while(0); -//---------------------------------------------------------------------- -//// Get 8192SU Rx descriptor. Added by Roger, 2008.04.15. -////---------------------------------------------------------------------- -#define RX_DESC_SIZE 24 -#define RX_DRV_INFO_SIZE_UNIT 8 - -#define IS_UNDER_11N_AES_MODE(_ieee) ((_ieee->pHTInfo->bCurrentHTSupport==TRUE) &&\ - (_ieee->pairwise_key_type==KEY_TYPE_CCMP)) - -#define COMP_TRACE BIT0 // For function call tracing. -#define COMP_DBG BIT1 // Only for temporary debug message. -#define COMP_MLME BIT1 -#define COMP_INIT BIT2 // during driver initialization / halt / reset. - - -#define COMP_RECV BIT3 // Reveive part data path. -#define COMP_SEND BIT4 // Send part path. -#define COMP_IO BIT5 // I/O Related. Added by Annie, 2006-03-02. -#define COMP_POWER BIT6 // 802.11 Power Save mode or System/Device Power state related. -#define COMP_EPROM BIT7 // 802.11 link related: join/start BSS, leave BSS. -#define COMP_SWBW BIT8 // For bandwidth switch. -#define COMP_POWER_TRACKING BIT9 //FOR 8190 TX POWER TRACKING -#define COMP_TURBO BIT10 // For Turbo Mode related. By Annie, 2005-10-21. -#define COMP_QOS BIT11 // For QoS. -#define COMP_RATE BIT12 // For Rate Adaptive mechanism, 2006.07.02, by rcnjko. -#define COMP_LPS BIT13 // For Radio Measurement. -#define COMP_DIG BIT14 // For DIG, 2006.09.25, by rcnjko. -#define COMP_PHY BIT15 -#define COMP_CH BIT16 //channel setting debug -#define COMP_TXAGC BIT17 // For Tx power, 060928, by rcnjko. -#define COMP_HIPWR BIT18 // For High Power Mechanism, 060928, by rcnjko. -#define COMP_HALDM BIT19 // For HW Dynamic Mechanism, 061010, by rcnjko. -#define COMP_SEC BIT20 // Event handling -#define COMP_LED BIT21 // For LED. -#define COMP_RF BIT22 // For RF. -#define COMP_RXDESC BIT23 - -#define COMP_RXDESC BIT23 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15. - -#define COMP_FIRMWARE BIT24 //for firmware downloading -#define COMP_HT BIT25 // For 802.11n HT related information. by Emily 2006-8-11 -#define COMP_AMSDU BIT26 // For A-MSDU Debugging -#define COMP_PS BIT26 - -#define COMP_SCAN BIT27 -#define COMP_CMD BIT28 -#define COMP_DOWN BIT29 //for rm driver module -#define COMP_RESET BIT30 //for silent reset -#define COMP_ERR BIT31 //for error out, always on - -#define RTL819x_DEBUG -#ifdef RTL819x_DEBUG -#define assert(expr) \ - if (!(expr)) { \ - printk( "Assertion failed! %s,%s,%s,line=%d\n", \ - #expr,__FILE__,__FUNCTION__,__LINE__); \ - } - -#define RT_DEBUG_DATA(level, data, datalen) \ - do{ if ((rt_global_debug_component & (level)) == (level)) \ - { \ - int i; \ - u8* pdata = (u8*) data; \ - printk(KERN_DEBUG RTL819xU_MODULE_NAME ": %s()\n", __FUNCTION__); \ - for(i=0; i<(int)(datalen); i++) \ - { \ - printk("%2x ", pdata[i]); \ - if ((i+1)%16 == 0) printk("\n"); \ - } \ - printk("\n"); \ - } \ - } while (0) -#else -#define assert(expr) do {} while (0) -#define RT_DEBUG_DATA(level, data, datalen) do {} while(0) -#endif /* RTL8169_DEBUG */ - - //2TODO: We should define 8192S firmware related macro settings here!! - #define RTL819X_DEFAULT_RF_TYPE RF_1T2R - #define RTL819X_TOTAL_RF_PATH 2 - - #define Rtl819XMACPHY_Array_PG Rtl8192UsbMACPHY_Array_PG - #define Rtl819XMACPHY_Array Rtl8192UsbMACPHY_Array - #define Rtl819XPHY_REGArray Rtl8192UsbPHY_REGArray - #define Rtl819XPHY_REG_1T2RArray Rtl8192UsbPHY_REG_1T2RArray - #define Rtl819XRadioC_Array Rtl8192UsbRadioC_Array - #define Rtl819XRadioD_Array Rtl8192UsbRadioD_Array - - #define Rtl819XFwImageArray Rtl8192SUFwImgArray - #define Rtl819XMAC_Array Rtl8192SUMAC_2T_Array - #define Rtl819XAGCTAB_Array Rtl8192SUAGCTAB_Array - #define Rtl819XPHY_REG_Array Rtl8192SUPHY_REG_2T2RArray - #define Rtl819XPHY_REG_to1T1R_Array Rtl8192SUPHY_ChangeTo_1T1RArray - #define Rtl819XPHY_REG_to1T2R_Array Rtl8192SUPHY_ChangeTo_1T2RArray - #define Rtl819XPHY_REG_to2T2R_Array Rtl8192SUPHY_ChangeTo_2T2RArray - #define Rtl819XPHY_REG_Array_PG Rtl8192SUPHY_REG_Array_PG - #define Rtl819XRadioA_Array Rtl8192SURadioA_1T_Array - #define Rtl819XRadioB_Array Rtl8192SURadioB_Array - #define Rtl819XRadioB_GM_Array Rtl8192SURadioB_GM_Array - #define Rtl819XRadioA_to1T_Array Rtl8192SURadioA_to1T_Array - #define Rtl819XRadioA_to2T_Array Rtl8192SURadioA_to2T_Array -// -// Queue Select Value in TxDesc -// -#define QSLT_BK 0x1 -#define QSLT_BE 0x0 -#define QSLT_VI 0x4 -#define QSLT_VO 0x6 -#define QSLT_BEACON 0x10 -#define QSLT_HIGH 0x11 -#define QSLT_MGNT 0x12 -#define QSLT_CMD 0x13 - -#define DESC90_RATE1M 0x00 -#define DESC90_RATE2M 0x01 -#define DESC90_RATE5_5M 0x02 -#define DESC90_RATE11M 0x03 -#define DESC90_RATE6M 0x04 -#define DESC90_RATE9M 0x05 -#define DESC90_RATE12M 0x06 -#define DESC90_RATE18M 0x07 -#define DESC90_RATE24M 0x08 -#define DESC90_RATE36M 0x09 -#define DESC90_RATE48M 0x0a -#define DESC90_RATE54M 0x0b -#define DESC90_RATEMCS0 0x00 -#define DESC90_RATEMCS1 0x01 -#define DESC90_RATEMCS2 0x02 -#define DESC90_RATEMCS3 0x03 -#define DESC90_RATEMCS4 0x04 -#define DESC90_RATEMCS5 0x05 -#define DESC90_RATEMCS6 0x06 -#define DESC90_RATEMCS7 0x07 -#define DESC90_RATEMCS8 0x08 -#define DESC90_RATEMCS9 0x09 -#define DESC90_RATEMCS10 0x0a -#define DESC90_RATEMCS11 0x0b -#define DESC90_RATEMCS12 0x0c -#define DESC90_RATEMCS13 0x0d -#define DESC90_RATEMCS14 0x0e -#define DESC90_RATEMCS15 0x0f -#define DESC90_RATEMCS32 0x20 - -// CCK Rates, TxHT = 0 -#define DESC92S_RATE1M 0x00 -#define DESC92S_RATE2M 0x01 -#define DESC92S_RATE5_5M 0x02 -#define DESC92S_RATE11M 0x03 - -// OFDM Rates, TxHT = 0 -#define DESC92S_RATE6M 0x04 -#define DESC92S_RATE9M 0x05 -#define DESC92S_RATE12M 0x06 -#define DESC92S_RATE18M 0x07 -#define DESC92S_RATE24M 0x08 -#define DESC92S_RATE36M 0x09 -#define DESC92S_RATE48M 0x0a -#define DESC92S_RATE54M 0x0b - -// MCS Rates, TxHT = 1 -#define DESC92S_RATEMCS0 0x0c -#define DESC92S_RATEMCS1 0x0d -#define DESC92S_RATEMCS2 0x0e -#define DESC92S_RATEMCS3 0x0f -#define DESC92S_RATEMCS4 0x10 -#define DESC92S_RATEMCS5 0x11 -#define DESC92S_RATEMCS6 0x12 -#define DESC92S_RATEMCS7 0x13 -#define DESC92S_RATEMCS8 0x14 -#define DESC92S_RATEMCS9 0x15 -#define DESC92S_RATEMCS10 0x16 -#define DESC92S_RATEMCS11 0x17 -#define DESC92S_RATEMCS12 0x18 -#define DESC92S_RATEMCS13 0x19 -#define DESC92S_RATEMCS14 0x1a -#define DESC92S_RATEMCS15 0x1b -#define DESC92S_RATEMCS15_SG 0x1c -#define DESC92S_RATEMCS32 0x20 - -#define RTL819X_DEFAULT_RF_TYPE RF_1T2R - -#define IEEE80211_WATCH_DOG_TIME 2000 -#define PHY_Beacon_RSSI_SLID_WIN_MAX 10 -//for txpowertracking -#define OFDM_Table_Length 19 -#define CCK_Table_length 12 - -// -//Tx Descriptor for RLT8192SU(Normal mode) -// -typedef struct _tx_desc_819x_usb { - // DWORD 0 - u16 PktSize;//:16; - u8 Offset;//:8; - u8 Type:2; // Reserved for MAC header Frame Type subfield. - u8 LastSeg:1; - u8 FirstSeg:1; - u8 LINIP:1; - u8 AMSDU:1; - u8 GF:1; - u8 OWN:1; - - // DWORD 1 - u8 MacID:5; - u8 MoreData:1; - u8 MOREFRAG:1; - u8 PIFS:1; - u8 QueueSelect:5; - u8 AckPolicy:2; - u8 NoACM:1; - u8 NonQos:1; - u8 KeyID:2; - u8 OUI:1; - u8 PktType:1; - u8 EnDescID:1; - u8 SecType:2; - u8 HTC:1; //padding0 - u8 WDS:1; //padding1 - u8 PktOffset:5; //padding_len (hw) - u8 HWPC:1; - - // DWORD 2 - u32 DataRetryLmt:6; - u32 RetryLmtEn:1; - u32 TSFL:5; - u32 RTSRC:6; // Reserved for HW RTS Retry Count. - u32 DATARC:6; // Reserved for HW DATA Retry Count. - u32 Rsvd1:5; - u32 AllowAggregation:1; - u32 BK:1; //Aggregation break. - u32 OwnMAC:1; - - // DWORD 3 - u8 NextHeadPage;//:8; - u8 TailPage;//:8; - u16 Seq:12; - u16 Frag:4; - - // DWORD 4 - u32 RTSRate:6; - u32 DisRTSFB:1; - u32 RTSRateFBLmt:4; - u32 CTS2Self:1; - u32 RTSEn:1; - u32 RaBRSRID:3; //Rate adaptive BRSR ID. - u32 TxHT:1; - u32 TxShort:1;//for data - u32 TxBandwidth:1; - u32 TxSubCarrier:2; - u32 STBC:2; - u32 RD:1; - u32 RTSHT:1; - u32 RTSShort:1; - u32 RTSBW:1; - u32 RTSSubcarrier:2; - u32 RTSSTBC:2; - u32 USERATE:1; - // DWORD 5 - u32 PktID:9; - u32 TxRate:6; - u32 DISFB:1; - u32 DataRateFBLmt:5; - u32 TxAGC:11; - - // DWORD 6 - u16 IPChkSum;//:16; - u16 TCPChkSum;//:16; - - // DWORD 7 - //u16 TxBuffSize;//:16;//pcie - u16 TxBufferSize; - u16 IPHdrOffset:8; - u16 Rsvd2:7; - u16 TCPEn:1; -}tx_desc_819x_usb, *ptx_desc_819x_usb; -typedef struct _tx_status_desc_8192s_usb{ - - //DWORD 0 - u8 TxRate:6; - u8 Rsvd1:1; - u8 BandWidth:1; - u8 RTSRate:6; - u8 AGGLS:1; - u8 AGG:1; - u8 RTSRC:6; - u8 DataRC:6; - u8 FailCause:2; - u8 TxOK:1; - u8 Own:1; - - //DWORD 1 - u16 Seq:12; - u8 QueueSel:5; - u8 MACID:5; - u8 PwrMgt:1; - u8 MoreData:1; - u8 Rsvd2; - - //DWORD 2 - u8 RxAGC1; - u8 RxAGC2; - u8 RxAGC3; - u8 RxAGC4; -}tx_status_desc_8192s_usb, *ptx_status_desc_8192s_usb; - - - -// -//Tx Descriptor for RLT8192SU(Load FW mode) -// -typedef struct _tx_desc_cmd_819x_usb{ - // DWORD 0 - u16 PktSize; - u8 Offset; - u8 Rsvd0:4; - u8 LINIP:1; - u8 Rsvd1:2; - u8 OWN:1; - - // DWORD 1, 2, 3, 4, 5, 6 are all reserved. - u32 Rsvd2; - u32 Rsvd3; - u32 Rsvd4; - u32 Rsvd5; - u32 Rsvd6; - u32 Rsvd7; - - // DWORD 7 - u16 TxBuffSize;//pcie - u16 Rsvd8; -}tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb; -// -//H2C Command for RLT8192SU(Host TxCmd) -// -typedef struct _tx_h2c_desc_cmd_8192s_usb{ - // DWORD 0 - u32 PktSize:16; - u32 Offset:8; - u32 Rsvd0:7; - u32 OWN:1; - - // DWORD 1 - u32 Rsvd1:8; - u32 QSEL:5; - u32 Rsvd2:19; - - // DWORD 2 - u32 Rsvd3; - - // DWORD 3 - u32 NextHeadPage:8; - u32 TailPage:8; - u32 Rsvd4:16; - - // DWORD 4, 5, 6, 7 - u32 Rsvd5; - u32 Rsvd6; - u32 Rsvd7; - u32 Rsvd8; -}tx_h2c_desc_cmd_8192s_usb, *ptx_h2c_desc_cmd_8192s_usb; - - -typedef struct _tx_h2c_cmd_hdr_8192s_usb{ - // DWORD 0 - u32 CmdLen:16; - u32 ElementID:8; - u32 CmdSeq:8; - - // DWORD 1 - u32 Rsvd0; -}tx_h2c_cmd_hdr_8192s_usb, *ptx_h2c_cmd_hdr_8192s_usb; - -typedef struct _tx_fwinfo_819x_usb{ - //DWORD 0 - u8 TxRate:7; - u8 CtsEnable:1; - u8 RtsRate:7; - u8 RtsEnable:1; - u8 TxHT:1; - u8 Short:1; //Short PLCP for CCK, or short GI for 11n MCS - u8 TxBandwidth:1; // This is used for HT MCS rate only. - u8 TxSubCarrier:2; // This is used for legacy OFDM rate only. - u8 STBC:2; - u8 AllowAggregation:1; - u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate - u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS - u8 RtsBandwidth:1; // This is used for HT MCS rate only. - u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only. - u8 RtsSTBC:2; - u8 EnableCPUDur:1; //Enable firmware to recalculate and assign packet duration - - //DWORD 1 - u32 RxMF:2; - u32 RxAMD:3; - u32 Reserved1:3; - u32 TxAGCOffSet:4;//TxAGCOffset:4; - u32 TxAGCSign:1; - u32 Tx_INFO_RSVD:6; - u32 PacketID:13; -}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb; - -typedef struct rtl8192_rx_info { - struct urb *urb; - struct net_device *dev; - u8 out_pipe; -}rtl8192_rx_info ; - -typedef struct rx_desc_819x_usb{ - //DWORD 0 - u16 Length:14; - u16 CRC32:1; - u16 ICV:1; - u8 RxDrvInfoSize:4; - u8 Security:3; - u8 Qos:1; - u8 Shift:2; - u8 PHYStatus:1; - u8 SWDec:1; - u8 LastSeg:1; - u8 FirstSeg:1; - u8 EOR:1; - u8 Own:1; - - //DWORD 1 - u16 MACID:5; - u16 TID:4; - u16 HwRsvd:5; - u16 PAGGR:1; - u16 FAGGR:1; - u8 A1_FIT:4; - u8 A2_FIT:4; - u8 PAM:1; - u8 PWR:1; - u8 MoreData:1; - u8 MoreFrag:1; - u8 Type:2; - u8 MC:1; - u8 BC:1; - - //DWORD 2 - u16 Seq:12; - u16 Frag:4; - u8 NextPktLen;//:8; - u8 Rsvd0:6; - u8 NextIND:1; - u8 Rsvd1:1; - - //DWORD 3 - u8 RxMCS:6; - u8 RxHT:1; - u8 AMSDU:1; - u8 SPLCP:1; - u8 BW:1; - u8 HTC:1; - u8 TCPChkRpt:1; - u8 IPChkRpt:1; - u8 TCPChkValID:1; - u8 HwPCErr:1; - u8 HwPCInd:1; - u16 IV0;//:16; - - //DWORD 4 - u32 IV1; - - //DWORD 5 - u32 TSFL; -}rx_desc_819x_usb, *prx_desc_819x_usb; - - -// -// Driver info are written to the begining of the RxBuffer -// -typedef struct rx_drvinfo_819x_usb{ - u8 gain_trsw[4]; - - //DWORD 1 - u8 pwdb_all; - u8 cfosho[4]; - - //DWORD 2 - u8 cfotail[4]; - - //DWORD 3 - char rxevm[2]; - char rxsnr[4]; - - //DWORD 4 - u8 pdsnr[2]; - - //DWORD 5 - u8 csi_current[2]; - u8 csi_target[2]; - - //DWORD 6 - u8 sigevm; - u8 max_ex_pwr; - u8 ex_intf_flag:1; - u8 sgi_en:1; - u8 rxsc:2; - u8 reserve:4; - -}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb; - - #define HWSET_MAX_SIZE_92S 128 - #define MAX_802_11_HEADER_LENGTH 40 - #define MAX_PKT_AGG_NUM 256 - #define TX_PACKET_SHIFT_BYTES USB_HWDESC_HEADER_LEN - -#define MAX_DEV_ADDR_SIZE 8 /* support till 64 bit bus width OS */ -#define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/ -#define ENCRYPTION_MAX_OVERHEAD 128 -#define USB_HWDESC_HEADER_LEN sizeof(tx_desc_819x_usb) -#define MAX_FRAGMENT_COUNT 8 -#ifdef RTL8192U -#define MAX_TRANSMIT_BUFFER_SIZE 8000 -#else -#define MAX_TRANSMIT_BUFFER_SIZE (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT) -#endif -#define scrclng 4 // octets for crc32 (FCS, ICV) - -#define HAL_DM_DIG_DISABLE BIT0 -#define HAL_DM_HIPWR_DISABLE BIT1 - -typedef enum rf_optype -{ - RF_OP_By_SW_3wire = 0, - RF_OP_By_FW, - RF_OP_MAX -}rf_op_type; - -/* for rtl819x */ -typedef enum _RT_STATUS{ - RT_STATUS_SUCCESS = 0, - RT_STATUS_FAILURE = 1, - RT_STATUS_PENDING = 2, - RT_STATUS_RESOURCE = 3 -}RT_STATUS,*PRT_STATUS; - -typedef enum _RTL8192SUSB_LOOPBACK{ - RTL8192SU_NO_LOOPBACK = 0, - RTL8192SU_MAC_LOOPBACK = 1, - RTL8192SU_DMA_LOOPBACK = 2, - RTL8192SU_CCK_LOOPBACK = 3, -}RTL8192SUSB_LOOPBACK_E; - -#define MAX_RECEIVE_BUFFER_SIZE 9100 // Add this to 9100 bytes to receive A-MSDU from RT-AP - - -/* Firmware Queue Layout */ -#define NUM_OF_FIRMWARE_QUEUE 10 -#define NUM_OF_PAGES_IN_FW 0x100 - - -#define NUM_OF_PAGE_IN_FW_QUEUE_BE 0x020 -#define NUM_OF_PAGE_IN_FW_QUEUE_BK 0x020 -#define NUM_OF_PAGE_IN_FW_QUEUE_VI 0x040 -#define NUM_OF_PAGE_IN_FW_QUEUE_VO 0x040 -#define NUM_OF_PAGE_IN_FW_QUEUE_HCCA 0 -#define NUM_OF_PAGE_IN_FW_QUEUE_CMD 0x4 -#define NUM_OF_PAGE_IN_FW_QUEUE_MGNT 0x20 -#define NUM_OF_PAGE_IN_FW_QUEUE_HIGH 0 -#define NUM_OF_PAGE_IN_FW_QUEUE_BCN 0x4 -#define NUM_OF_PAGE_IN_FW_QUEUE_PUB 0x18 - - -#define APPLIED_RESERVED_QUEUE_IN_FW 0x80000000 -#define RSVD_FW_QUEUE_PAGE_BK_SHIFT 0x00 -#define RSVD_FW_QUEUE_PAGE_BE_SHIFT 0x08 -#define RSVD_FW_QUEUE_PAGE_VI_SHIFT 0x10 -#define RSVD_FW_QUEUE_PAGE_VO_SHIFT 0x18 -#define RSVD_FW_QUEUE_PAGE_MGNT_SHIFT 0x10 -#define RSVD_FW_QUEUE_PAGE_CMD_SHIFT 0x08 -#define RSVD_FW_QUEUE_PAGE_BCN_SHIFT 0x00 -#define RSVD_FW_QUEUE_PAGE_PUB_SHIFT 0x08 - -#define DEFAULT_FRAG_THRESHOLD 2342U -#define MIN_FRAG_THRESHOLD 256U -#define DEFAULT_BEACONINTERVAL 0x64U -#define DEFAULT_BEACON_ESSID "Rtl819xU" - -#define DEFAULT_SSID "" -#define DEFAULT_RETRY_RTS 7 -#define DEFAULT_RETRY_DATA 7 -#define PRISM_HDR_SIZE 64 - -#define PHY_RSSI_SLID_WIN_MAX 100 - - -typedef enum _WIRELESS_MODE { - WIRELESS_MODE_UNKNOWN = 0x00, - WIRELESS_MODE_A = 0x01, - WIRELESS_MODE_B = 0x02, - WIRELESS_MODE_G = 0x04, - WIRELESS_MODE_AUTO = 0x08, - WIRELESS_MODE_N_24G = 0x10, - WIRELESS_MODE_N_5G = 0x20 -} WIRELESS_MODE; - - -#define RTL_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30 - -typedef struct buffer -{ - struct buffer *next; - u32 *buf; - -} buffer; - -typedef struct rtl_reg_debug{ - unsigned int cmd; - struct { - unsigned char type; - unsigned char addr; - unsigned char page; - unsigned char length; - } head; - unsigned char buf[0xff]; -}rtl_reg_debug; - -typedef struct _rt_9x_tx_rate_history { - u32 cck[4]; - u32 ofdm[8]; - u32 ht_mcs[4][16]; -}rt_tx_rahis_t, *prt_tx_rahis_t; -typedef struct _RT_SMOOTH_DATA_4RF { - char elements[4][100];//array to store values - u32 index; //index to current array to store - u32 TotalNum; //num of valid elements - u32 TotalVal[4]; //sum of valid elements -}RT_SMOOTH_DATA_4RF, *PRT_SMOOTH_DATA_4RF; - -#define MAX_8192U_RX_SIZE 8192 // This maybe changed for D-cut larger aggregation size -//stats seems messed up, clean it ASAP -typedef struct Stats -{ - unsigned long txrdu; - unsigned long rxok; - unsigned long rxframgment; - unsigned long rxcmdpkt[4]; //08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query - unsigned long rxurberr; - unsigned long rxstaterr; - unsigned long received_rate_histogram[4][32]; //0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa - unsigned long received_preamble_GI[2][32]; //0: Long preamble/GI, 1:Short preamble/GI - unsigned long rx_AMPDUsize_histogram[5]; // level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K) - unsigned long rx_AMPDUnum_histogram[5]; // level: (<5), (5~10), (10~20), (20~40), (>40) - unsigned long numpacket_matchbssid; // debug use only. - unsigned long numpacket_toself; // debug use only. - unsigned long num_process_phyinfo; // debug use only. - unsigned long numqry_phystatus; - unsigned long numqry_phystatusCCK; - unsigned long numqry_phystatusHT; - unsigned long received_bwtype[5]; //0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate - unsigned long txnperr; - unsigned long txnpdrop; - unsigned long txresumed; - unsigned long txnpokint; - unsigned long txoverflow; - unsigned long txlpokint; - unsigned long txlpdrop; - unsigned long txlperr; - unsigned long txbeokint; - unsigned long txbedrop; - unsigned long txbeerr; - unsigned long txbkokint; - unsigned long txbkdrop; - unsigned long txbkerr; - unsigned long txviokint; - unsigned long txvidrop; - unsigned long txvierr; - unsigned long txvookint; - unsigned long txvodrop; - unsigned long txvoerr; - unsigned long txbeaconokint; - unsigned long txbeacondrop; - unsigned long txbeaconerr; - unsigned long txmanageokint; - unsigned long txmanagedrop; - unsigned long txmanageerr; - unsigned long txdatapkt; - unsigned long txfeedback; - unsigned long txfeedbackok; - - unsigned long txoktotal; - unsigned long txokbytestotal; - unsigned long txokinperiod; - unsigned long txmulticast; - unsigned long txbytesmulticast; - unsigned long txbroadcast; - unsigned long txbytesbroadcast; - unsigned long txunicast; - unsigned long txbytesunicast; - - unsigned long rxoktotal; - unsigned long rxbytesunicast; - unsigned long txfeedbackfail; - unsigned long txerrtotal; - unsigned long txerrbytestotal; - unsigned long txerrmulticast; - unsigned long txerrbroadcast; - unsigned long txerrunicast; - unsigned long txretrycount; - unsigned long txfeedbackretry; - u8 last_packet_rate; - unsigned long slide_signal_strength[100]; - unsigned long slide_evm[100]; - unsigned long slide_rssi_total; // For recording sliding window's RSSI value - unsigned long slide_evm_total; // For recording sliding window's EVM value - long signal_strength; // Transformed, in dbm. Beautified signal strength for UI, not correct. - long signal_quality; - long last_signal_strength_inpercent; - long recv_signal_power; // Correct smoothed ss in Dbm, only used in driver to report real power now. - u8 rx_rssi_percentage[4]; - u8 rx_evm_percentage[2]; - long rxSNRdB[4]; - rt_tx_rahis_t txrate; - u32 Slide_Beacon_pwdb[100]; //cosa add for beacon rssi - u32 Slide_Beacon_Total; //cosa add for beacon rssi - RT_SMOOTH_DATA_4RF cck_adc_pwdb; - - u32 CurrentShowTxate; -} Stats; - -// Bandwidth Offset -#define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0 -#define HAL_PRIME_CHNL_OFFSET_LOWER 1 -#define HAL_PRIME_CHNL_OFFSET_UPPER 2 - -typedef struct ChnlAccessSetting { - u16 SIFS_Timer; - u16 DIFS_Timer; - u16 SlotTimeTimer; - u16 EIFS_Timer; - u16 CWminIndex; - u16 CWmaxIndex; -}*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING; - -typedef struct _BB_REGISTER_DEFINITION{ - u32 rfintfs; // set software control: // 0x870~0x877[8 bytes] - u32 rfintfi; // readback data: // 0x8e0~0x8e7[8 bytes] - u32 rfintfo; // output data: // 0x860~0x86f [16 bytes] - u32 rfintfe; // output enable: // 0x860~0x86f [16 bytes] - u32 rf3wireOffset; // LSSI data: // 0x840~0x84f [16 bytes] - u32 rfLSSI_Select; // BB Band Select: // 0x878~0x87f [8 bytes] - u32 rfTxGainStage; // Tx gain stage: // 0x80c~0x80f [4 bytes] - u32 rfHSSIPara1; // wire parameter control1 : // 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes] - u32 rfHSSIPara2; // wire parameter control2 : // 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] - u32 rfSwitchControl; //Tx Rx antenna control : // 0x858~0x85f [16 bytes] - u32 rfAGCControl1; //AGC parameter control1 : // 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] - u32 rfAGCControl2; //AGC parameter control2 : // 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] - u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : // 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] - u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : // 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes] - u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix // 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes] - u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type // 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] - u32 rfLSSIReadBack; //LSSI RF readback data // 0x8a0~0x8af [16 bytes] - u32 rfLSSIReadBackPi; //LSSI RF readback data PI mode 0x8b8-8bc for Path A and B -}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T; - -typedef enum _RT_RF_TYPE_819xU{ - RF_TYPE_MIN = 0, - RF_8225, - RF_8256, - RF_8258, - RF_6052=4, // 4 11b/g/n RF - RF_PSEUDO_11N = 5, -}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU; - -typedef enum _RF_POWER_STATE{ - RF_ON, - RF_SLEEP, - RF_OFF, - RF_SHUT_DOWN, -}RF_POWER_STATE, *PRF_POWER_STATE; - -typedef struct _rate_adaptive -{ - u8 rate_adaptive_disabled; - u8 ratr_state; - u16 reserve; - - u32 high_rssi_thresh_for_ra; - u32 high2low_rssi_thresh_for_ra; - u8 low2high_rssi_thresh_for_ra40M; - u32 low_rssi_thresh_for_ra40M; - u8 low2high_rssi_thresh_for_ra20M; - u32 low_rssi_thresh_for_ra20M; - u32 upper_rssi_threshold_ratr; - u32 middle_rssi_threshold_ratr; - u32 low_rssi_threshold_ratr; - u32 low_rssi_threshold_ratr_40M; - u32 low_rssi_threshold_ratr_20M; - u8 ping_rssi_enable; //cosa add for test - u32 ping_rssi_ratr; //cosa add for test - u32 ping_rssi_thresh_for_ra;//cosa add for test - u32 last_ratr; - -} rate_adaptive, *prate_adaptive; - -#define TxBBGainTableLength 37 -#define CCKTxBBGainTableLength 23 - -typedef struct _txbbgain_struct -{ - long txbb_iq_amplifygain; - u32 txbbgain_value; -} txbbgain_struct, *ptxbbgain_struct; - -typedef struct _ccktxbbgain_struct -{ - //The Value is from a22 to a29 one Byte one time is much Safer - u8 ccktxbb_valuearray[8]; -} ccktxbbgain_struct,*pccktxbbgain_struct; - - -typedef struct _init_gain -{ - u8 xaagccore1; - u8 xbagccore1; - u8 xcagccore1; - u8 xdagccore1; - u8 cca; - -} init_gain, *pinit_gain; - -typedef struct _phy_ofdm_rx_status_report_819xusb -{ - u8 trsw_gain_X[4]; - u8 pwdb_all; - u8 cfosho_X[4]; - u8 cfotail_X[4]; - u8 rxevm_X[2]; - u8 rxsnr_X[4]; - u8 pdsnr_X[2]; - u8 csi_current_X[2]; - u8 csi_target_X[2]; - u8 sigevm; - u8 max_ex_pwr; - u8 sgi_en; - u8 rxsc_sgien_exflg; -}phy_sts_ofdm_819xusb_t; - -typedef struct _phy_cck_rx_status_report_819xusb -{ - /* For CCK rate descriptor. This is a unsigned 8:1 variable. LSB bit presend - 0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */ - u8 adc_pwdb_X[4]; - u8 sq_rpt; - u8 cck_agc_rpt; -}phy_sts_cck_819xusb_t; - - -typedef struct _phy_ofdm_rx_status_rxsc_sgien_exintfflag{ - u8 reserved:4; - u8 rxsc:2; - u8 sgi_en:1; - u8 ex_intf_flag:1; -}phy_ofdm_rx_status_rxsc_sgien_exintfflag; - -typedef enum _RT_CUSTOMER_ID -{ - RT_CID_DEFAULT = 0, - RT_CID_8187_ALPHA0 = 1, - RT_CID_8187_SERCOMM_PS = 2, - RT_CID_8187_HW_LED = 3, - RT_CID_8187_NETGEAR = 4, - RT_CID_WHQL = 5, - RT_CID_819x_CAMEO = 6, - RT_CID_819x_RUNTOP = 7, - RT_CID_819x_Senao = 8, - RT_CID_TOSHIBA = 9, // Merge by Jacken, 2008/01/31. - RT_CID_819x_Netcore = 10, - RT_CID_Nettronix = 11, - RT_CID_DLINK = 12, - RT_CID_PRONET = 13, - RT_CID_COREGA = 14, - RT_CID_819x_ALPHA = 15, - RT_CID_819x_Sitecom = 16, - RT_CID_CCX = 17, - RT_CID_819x_Lenovo = 18, - RT_CID_819x_QMI = 19, - RT_CID_819x_Edimax_Belkin = 20, - RT_CID_819x_Sercomm_Belkin = 21, - RT_CID_819x_CAMEO1 = 22, - RT_CID_819x_MSI = 23, - RT_CID_819x_Acer = 24, -}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID; - -typedef enum _RT_OP_MODE{ - RT_OP_MODE_AP, - RT_OP_MODE_INFRASTRUCTURE, - RT_OP_MODE_IBSS, - RT_OP_MODE_NO_LINK, -}RT_OP_MODE, *PRT_OP_MODE; - -typedef enum _RESET_TYPE { - RESET_TYPE_NORESET = 0x00, - RESET_TYPE_NORMAL = 0x01, - RESET_TYPE_SILENT = 0x02 -} RESET_TYPE; - -/* The simple tx command OP code. */ -typedef enum _tag_TxCmd_Config_Index{ - TXCMD_TXRA_HISTORY_CTRL = 0xFF900000, - TXCMD_RESET_TX_PKT_BUFF = 0xFF900001, - TXCMD_RESET_RX_PKT_BUFF = 0xFF900002, - TXCMD_SET_TX_DURATION = 0xFF900003, - TXCMD_SET_RX_RSSI = 0xFF900004, - TXCMD_SET_TX_PWR_TRACKING = 0xFF900005, - TXCMD_XXXX_CTRL, -}DCMD_TXCMD_OP; - -typedef enum{ - NIC_8192U = 1, - NIC_8190P = 2, - NIC_8192E = 3, - NIC_8192SE = 4, - NIC_8192SU = 5, - } nic_t; - -struct rtl819x_ops{ - nic_t nic_type; - void (* rtl819x_read_eeprom_info)(struct net_device *dev); - short (* rtl819x_tx)(struct net_device *dev, struct sk_buff* skb); - short (* rtl819x_tx_cmd)(struct net_device *dev, struct sk_buff *skb); - void (* rtl819x_rx_nomal)(struct sk_buff* skb); - void (* rtl819x_rx_cmd)(struct sk_buff *skb); - bool (* rtl819x_adapter_start)(struct net_device *dev); - void (* rtl819x_link_change)(struct net_device *dev); - void (* rtl819x_initial_gain)(struct net_device *dev,u8 Operation); - void (* rtl819x_query_rxdesc_status)(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe); -}; - -typedef struct r8192_priv -{ - struct rtl819x_ops* ops; - struct usb_device *udev; - /* added for maintain info from eeprom */ - short epromtype; - u16 eeprom_vid; - u16 eeprom_pid; - u8 eeprom_CustomerID; - u8 eeprom_SubCustomerID; - u16 eeprom_ChannelPlan; - RT_CUSTOMER_ID CustomerID; - LED_STRATEGY_819xUsb LedStrategy; - u8 txqueue_to_outpipemap[9]; - u8 RtOutPipes[16]; - u8 RtInPipes[16]; - u8 ep_in_num; - u8 ep_out_num; - u8 ep_num; - int irq; - struct ieee80211_device *ieee80211; - - u8 RATRTableBitmap; - - u32 IC_Cut; - short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */ - u32 card_8192_version; /* if TCR reports card V B/C this discriminates */ - short enable_gpio0; - enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type; - short hw_plcp_len; - short plcp_preamble_mode; - - spinlock_t irq_lock; - spinlock_t tx_lock; - spinlock_t ps_lock; - struct mutex mutex; - bool ps_force; - spinlock_t rf_lock; //used to lock rf write operation added by wb - spinlock_t rf_ps_lock; - - u16 irq_mask; - short chan; - short sens; - short max_sens; - - short up; - short crcmon; //if 1 allow bad crc frame reception in monitor mode - bool bSurpriseRemoved; - - struct semaphore wx_sem; - struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david - - u8 rf_type; //0 means 1T2R, 1 means 2T4R - RT_RF_TYPE_819xU rf_chip; - - short (*rf_set_sens)(struct net_device *dev,short sens); - u8 (*rf_set_chan)(struct net_device *dev,u8 ch); - void (*rf_close)(struct net_device *dev); - void (*rf_init)(struct net_device *dev); - short promisc; - u32 mc_filter[2]; - /*stats*/ - struct Stats stats; - struct iw_statistics wstats; - struct proc_dir_entry *dir_dev; - - /*RX stuff*/ - struct urb **rx_urb; - struct urb **rx_cmd_urb; - -/* for Rx process */ - struct sk_buff_head rx_queue; - struct sk_buff_head skb_queue; - - struct work_struct qos_activate; - - short tx_urb_index; - atomic_t tx_pending[0x10];//UART_PRIORITY+1 - - - struct tasklet_struct irq_rx_tasklet; - struct tasklet_struct irq_tx_tasklet; - struct urb *rxurb_task; - - //2 Tx Related variables - u16 ShortRetryLimit; - u16 LongRetryLimit; - u32 TransmitConfig; - u8 RegCWinMin; // For turbo mode CW adaptive. Added by Annie, 2005-10-27. - - u32 LastRxDescTSFHigh; - u32 LastRxDescTSFLow; - - - //2 Rx Related variables - u16 EarlyRxThreshold; - u32 ReceiveConfig; - u8 AcmControl; - - u8 RFProgType; - - u8 retry_data; - u8 retry_rts; - u16 rts; - - struct ChnlAccessSetting ChannelAccessSetting; - - struct work_struct reset_wq; - struct work_struct mcast_wq; - -/**********************************************************/ - //for rtl819xUsb - u16 basic_rate; - u8 short_preamble; - u8 slot_time; - bool bDcut; - bool bCurrentRxAggrEnable; - u8 Rf_Mode; //add for Firmware RF -R/W switch - u8 FwRsvdTxPageCfg; - prt_firmware pFirmware; - RTL8192SUSB_LOOPBACK_E LoopbackMode; - bool usb_error; - - u16 EEPROMTxPowerDiff; - u8 EEPROMThermalMeter; - u8 EEPROMPwDiff; - u8 EEPROMCrystalCap; - u8 EEPROMBluetoothCoexist; - u8 EEPROM_Def_Ver; - u8 EEPROMTxPowerLevelCCK;// CCK channel 1~14 - u8 EEPROMTxPowerLevelCCK_V1[3]; - u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14 - u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G - - u8 EEPROMOptional; - u8 ShowRateMode; - bool bForcedShowRxRate; - - u32 RfRegChnlVal[2]; - - bool bDmDisableProtect; - bool bIgnoreDiffRateTxPowerOffset; - - // For EEPROM TX Power Index like 8190 series - u8 EEPROMRfACCKChnl1TxPwLevel[3]; //RF-A CCK Tx Power Level at channel 7 - u8 EEPROMRfAOfdmChnlTxPwLevel[3];//RF-A CCK Tx Power Level at [0],[1],[2] = channel 1,7,13 - u8 EEPROMRfCCCKChnl1TxPwLevel[3]; //RF-C CCK Tx Power Level at channel 7 - u8 EEPROMRfCOfdmChnlTxPwLevel[3];//RF-C CCK Tx Power Level at [0],[1],[2] = channel 1,7,13 - - // F92S new definition - //RF-A&B CCK/OFDM Tx Power Level at three channel are [1-3] [4-9] [10-14] - u8 RfCckChnlAreaTxPwr[2][3]; - u8 RfOfdmChnlAreaTxPwr1T[2][3]; - u8 RfOfdmChnlAreaTxPwr2T[2][3]; - - // Add For EEPROM Efuse switch and Efuse Shadow map Setting - bool EepromOrEfuse; - bool bBootFromEfuse; // system boot form EFUSE - u8 EfuseMap[2][HWSET_MAX_SIZE_92S]; - u16 EfuseUsedBytes; - u8 EfuseUsedPercentage; - - - u8 EEPROMUsbOption; - u8 EEPROMUsbPhyParam[5]; - u8 EEPROMTxPwrBase; - u8 EEPROMBoardType; - bool bBootFromEEPROM; // system boot from EEPROM - u8 EEPROMTSSI_A; - u8 EEPROMTSSI_B; - u8 EEPROMHT2T_TxPwr[6]; // For channel 1, 7 and 13 on path A/B. - u8 EEPROMTxPwrTkMode; - - u8 bTXPowerDataReadFromEEPORM; - u8 EEPROMRegulatory; - u8 EEPROMPwrGroup[2][3]; - - u8 EEPROMVersion; - u8 EEPROMUsbEndPointNumber; - - bool AutoloadFailFlag; - u8 RfTxPwrLevelCck[2][14]; - u8 RfTxPwrLevelOfdm1T[2][14]; - u8 RfTxPwrLevelOfdm2T[2][14]; - // new EEPROM format. - u8 TxPwrHt20Diff[2][14]; // HT 20<->40 Pwr diff - u8 TxPwrLegacyHtDiff[2][14]; // For HT<->legacy pwr diff - u8 TxPwrbandEdgeHt40[2][2]; // Band edge for HY 40MHZlow/up channel - u8 TxPwrbandEdgeHt20[2][2]; // Band edge for HY 40MHZ low/up channel - u8 TxPwrbandEdgeLegacyOfdm[2][2]; // Band edge for legacy ofdm low/up channel - u8 TxPwrbandEdgeFlag; // Band edge enable flag - - // L1 and L2 high power threshold. - u8 MidHighPwrTHR_L1; - u8 MidHighPwrTHR_L2; - u8 TxPwrSafetyFlag; // for Tx power safety spec - -/*PHY related*/ - BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D - // Read/write are allow for following hardware information variables - u32 MCSTxPowerLevelOriginalOffset[7];//FIXLZM - u32 CCKTxPowerLevelOriginalOffset; - u8 TxPowerLevelCCK[14]; // CCK channel 1~14 - u8 TxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14 - u8 TxPowerLevelOFDM5G[14]; // OFDM 5G - u32 Pwr_Track; - u8 TxPowerDiff; - u8 AntennaTxPwDiff[2]; // Antenna gain offset, index 0 for B, 1 for C, and 2 for D - u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1 - u8 ThermalValue; - u8 CrystalCap; // CrystalCap. - u8 BluetoothCoexist; - u8 ExternalPA; - - u8 CckPwEnl; - // Use to calculate PWBD. - u8 bCckHighPower; - long undecorated_smoothed_pwdb; - - //for set channel - u8 SwChnlInProgress; - u8 SwChnlStage; - u8 SwChnlStep; - u8 SetBWModeInProgress; - HT_CHANNEL_WIDTH CurrentChannelBW; - bool bChnlPlanFromHW; - u8 ChannelPlan; - u16 RegChannelPlan; - u8 pwrGroupCnt; - // 8190 40MHz mode - // - u8 nCur40MhzPrimeSC; // Control channel sub-carrier - - u32 RfReg0Value[4]; - u8 NumTotalRFPath; - bool brfpath_rxenable[4]; - //RF set related - bool SetRFPowerStateInProgress; - - struct timer_list watch_dog_timer; - - bool bdynamic_txpower; //bDynamicTxPower - bool bDynamicTxHighPower; // Tx high power state - bool bDynamicTxLowPower; // Tx low power state - bool bLastDTPFlag_High; - bool bLastDTPFlag_Low; - - bool bstore_last_dtpflag; - bool bstart_txctrl_bydtp; //Define to discriminate on High power State or on sitesuvey to change Tx gain index - - rate_adaptive rate_adaptive; - // TX power tracking - txbbgain_struct txbbgain_table[TxBBGainTableLength]; - u8 EEPROMTxPowerTrackEnable; - u8 txpower_count;//For 6 sec do tracking again - bool btxpower_trackingInit; - u8 OFDM_index; - u8 CCK_index; - u8 Record_CCK_20Mindex; - u8 Record_CCK_40Mindex; - // CCK TX Power Tracking - ccktxbbgain_struct cck_txbbgain_table[CCKTxBBGainTableLength]; - ccktxbbgain_struct cck_txbbgain_ch14_table[CCKTxBBGainTableLength]; - u8 rfa_txpowertrackingindex; - u8 rfa_txpowertrackingindex_real; - u8 rfa_txpowertracking_default; - u8 rfc_txpowertrackingindex; - u8 rfc_txpowertrackingindex_real; - - s8 cck_present_attentuation; - u8 cck_present_attentuation_20Mdefault; - u8 cck_present_attentuation_40Mdefault; - char cck_present_attentuation_difference; - bool btxpower_tracking; - bool bcck_in_ch14; - bool btxpowerdata_readfromEEPORM; - u16 TSSI_13dBm; - u8 CCKPresentAttentuation_20Mdefault; - u8 CCKPresentAttentuation_40Mdefault; - char CCKPresentAttentuation_difference; - char CCKPresentAttentuation; - bool bDMInitialGainEnable; - //For Backup Initial Gain - init_gain initgain_backup; - u8 DefaultInitialGain[4]; - // For EDCA Turbo mode - bool bis_any_nonbepkts; - bool bcurrent_turbo_EDCA; - bool bis_cur_rdlstate; - struct timer_list fsync_timer; - bool bfsync_processing; // 500ms Fsync timer is active or not - u32 rate_record; - u32 rateCountDiffRecord; - u32 ContiuneDiffCount; - bool bswitch_fsync; - - u8 framesync; - u32 framesyncC34; - u8 framesyncMonitor; - // RX related - u16 nrxAMPDU_size; - u8 nrxAMPDU_aggr_num; - - // gpio - bool bHwRadioOff; - - bool isRFOff; - bool bInPowerSaveMode; - - bool RFChangeInProgress; - bool RegRfOff; - u8 bHwRfOffAction; - - u32 reset_count; - bool bpbc_pressed; - // debug - u32 txpower_checkcnt; - u32 txpower_tracking_callback_cnt; - u8 thermal_read_val[40]; - u8 thermal_readback_index; - u32 ccktxpower_adjustcnt_not_ch14; - u32 ccktxpower_adjustcnt_ch14; - u8 tx_fwinfo_force_subcarriermode; - u8 tx_fwinfo_force_subcarrierval; - // silent reset - RESET_TYPE ResetProgress; - bool bForcedSilentReset; - bool bDisableNormalResetCheck; - u16 TxCounter; - u16 RxCounter; - int IrpPendingCount; - bool bResetInProgress; - bool force_reset; - bool force_lps; - u8 InitialGainOperateType; - - u16 SifsTime; - - struct delayed_work update_beacon_wq; - struct delayed_work watch_dog_wq; - struct delayed_work txpower_tracking_wq; - struct delayed_work rfpath_check_wq; - struct delayed_work gpio_change_rf_wq; - struct delayed_work initialgain_operate_wq; - - struct workqueue_struct *priv_wq; - - u32 IntrMask; - // RF and BB access related synchronization flags. - bool bChangeBBInProgress; // BaseBand RW is still in progress. - bool bChangeRFInProgress; // RF RW is still in progress. - - u32 CCKTxPowerAdjustCntCh14; //debug only - u32 CCKTxPowerAdjustCntNotCh14; //debug only - u32 TXPowerTrackingCallbackCnt; //debug only - u32 TxPowerCheckCnt; //debug only - u32 RFWritePageCnt[3]; //debug only - u32 RFReadPageCnt[3]; //debug only - u8 ThermalReadBackIndex; //debug only - u8 ThermalReadVal[40]; //debug only - - // not realize true, just define it, set it 0 default, because some func use it - bool bInHctTest; - - // The current Tx Power Level - u8 CurrentCckTxPwrIdx; - u8 CurrentOfdm24GTxPwrIdx; - - // For pass 92S common phycfg.c compiler - u8 TxPowerLevelCCK_A[14]; // RF-A, CCK channel 1~14 - u8 TxPowerLevelOFDM24G_A[14]; // RF-A, OFDM 2.4G channel 1~14 - u8 TxPowerLevelCCK_C[14]; // RF-C, CCK channel 1~14 - u8 TxPowerLevelOFDM24G_C[14]; // RF-C, OFDM 2.4G channel 1~14 - u8 LegacyHTTxPowerDiff; // Legacy to HT rate power diff - char RF_C_TxPwDiff; // Antenna gain offset, rf-c to rf-a - - bool bRFSiOrPi;//0=si, 1=pi. - - bool SetFwCmdInProgress; //is set FW CMD in Progress? 92S only - u8 CurrentFwCmdIO; - - u8 MinSpaceCfg; - - u16 rf_pathmap; - - /* added for led control */ - PLED_819xUsb pLed; - LED_819xUsb SwLed0; - LED_819xUsb SwLed1; - u8 bRegUseLed; - struct work_struct BlinkWorkItem; - /* added for led control */ - u16 FwCmdIOMap; - u32 FwCmdIOParam; - u8 DMFlag; - - - - -}r8192_priv; - -//for rtl8187B -typedef enum{ - BULK_PRIORITY = 0x01, - //RSVD0, - //RSVD1, - LOW_PRIORITY, - NORM_PRIORITY, - VO_PRIORITY, - VI_PRIORITY, //0x05 - BE_PRIORITY, - BK_PRIORITY, - RSVD2, - RSVD3, - BEACON_PRIORITY, //0x0A - HIGH_PRIORITY, - MANAGE_PRIORITY, - RSVD4, - RSVD5, - UART_PRIORITY //0x0F -} priority_t; - -#ifdef JOHN_HWSEC -struct ssid_thread { - struct net_device *dev; - u8 name[IW_ESSID_MAX_SIZE + 1]; -}; -#endif - -void LedControl8192SUsb(struct net_device *dev, LED_CTL_MODE LedAction); -void InitSwLeds(struct net_device *dev); -void DeInitSwLeds(struct net_device *dev); -short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb); -short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb); -bool FirmwareDownload92S(struct net_device *dev); - -short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb); -short rtl8192_tx(struct net_device *dev, struct sk_buff* skb); - -u32 read_cam(struct net_device *dev, u8 addr); -void write_cam(struct net_device *dev, u8 addr, u32 data); - -u8 read_nic_byte(struct net_device *dev, int x); -u8 read_nic_byte_E(struct net_device *dev, int x); -u32 read_nic_dword(struct net_device *dev, int x); -u16 read_nic_word(struct net_device *dev, int x) ; -void write_nic_byte(struct net_device *dev, int x,u8 y); -void write_nic_byte_E(struct net_device *dev, int x,u8 y); -void write_nic_word(struct net_device *dev, int x,u16 y); -void write_nic_dword(struct net_device *dev, int x,u32 y); -void force_pci_posting(struct net_device *dev); - -void rtl8192_rtx_disable(struct net_device *); -void rtl8192_rx_enable(struct net_device *); -void rtl8192_tx_enable(struct net_device *); - -void rtl8192_disassociate(struct net_device *dev); -void rtl8185_set_rf_pins_enable(struct net_device *dev,u32 a); - -void rtl8192_set_anaparam(struct net_device *dev,u32 a); -void rtl8185_set_anaparam2(struct net_device *dev,u32 a); -void rtl8192_update_msr(struct net_device *dev); -int rtl8192_down(struct net_device *dev); -int rtl8192_up(struct net_device *dev); -void rtl8192_commit(struct net_device *dev); -void rtl8192_set_chan(struct net_device *dev,short ch); -void write_phy(struct net_device *dev, u8 adr, u8 data); -void write_phy_cck(struct net_device *dev, u8 adr, u32 data); -void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data); -void rtl8185_tx_antenna(struct net_device *dev, u8 ant); -void rtl8192_set_rxconf(struct net_device *dev); -extern void rtl819xusb_beacon_tx(struct net_device *dev,u16 tx_rate); -void CamResetAllEntry(struct net_device* dev); -void EnableHWSecurityConfig8192(struct net_device *dev); -void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, u8 *MacAddr, u8 DefaultKey, u32 *KeyContent ); -short rtl8192_is_tx_queue_empty(struct net_device *dev); - -#endif |