diff options
Diffstat (limited to 'drivers/staging/rts5208/rtsx_chip.h')
-rw-r--r-- | drivers/staging/rts5208/rtsx_chip.h | 1002 |
1 files changed, 1002 insertions, 0 deletions
diff --git a/drivers/staging/rts5208/rtsx_chip.h b/drivers/staging/rts5208/rtsx_chip.h new file mode 100644 index 0000000..c25efcc --- /dev/null +++ b/drivers/staging/rts5208/rtsx_chip.h @@ -0,0 +1,1002 @@ +/* Driver for Realtek PCI-Express card reader + * Header file + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG (wei_wang@realsil.com.cn) + * Micky Ching (micky_ching@realsil.com.cn) + */ + +#ifndef __REALTEK_RTSX_CHIP_H +#define __REALTEK_RTSX_CHIP_H + +#include "rtsx.h" + +#define SUPPORT_CPRM +#define SUPPORT_OCP +#define SUPPORT_SDIO_ASPM +#define SUPPORT_MAGIC_GATE +#define SUPPORT_MSXC +#define SUPPORT_SD_LOCK +/* Hardware switch bus_ctl and cd_ctl automatically */ +#define HW_AUTO_SWITCH_SD_BUS +/* Enable hardware interrupt write clear */ +#define HW_INT_WRITE_CLR +/* #define LED_AUTO_BLINK */ +/* #define DISABLE_CARD_INT */ + +#ifdef SUPPORT_MAGIC_GATE + /* Using NORMAL_WRITE instead of AUTO_WRITE to set ICV */ + #define MG_SET_ICV_SLOW + /* HW may miss ERR/CMDNK signal when sampling INT status. */ + #define MS_SAMPLE_INT_ERR + /* HW DO NOT support Wait_INT function during READ_BYTES + * transfer mode */ + #define READ_BYTES_WAIT_INT +#endif + +#ifdef SUPPORT_MSXC +#define XC_POWERCLASS +#define SUPPORT_PCGL_1P18 +#endif + +#ifndef LED_AUTO_BLINK +#define REGULAR_BLINK +#endif + +#define LED_BLINK_SPEED 5 +#define LED_TOGGLE_INTERVAL 6 +#define GPIO_TOGGLE_THRESHOLD 1024 +#define LED_GPIO 0 + +#define POLLING_INTERVAL 30 + +#define TRACE_ITEM_CNT 64 + +#ifndef STATUS_SUCCESS +#define STATUS_SUCCESS 0 +#endif +#ifndef STATUS_FAIL +#define STATUS_FAIL 1 +#endif +#ifndef STATUS_TIMEDOUT +#define STATUS_TIMEDOUT 2 +#endif +#ifndef STATUS_NOMEM +#define STATUS_NOMEM 3 +#endif +#ifndef STATUS_READ_FAIL +#define STATUS_READ_FAIL 4 +#endif +#ifndef STATUS_WRITE_FAIL +#define STATUS_WRITE_FAIL 5 +#endif +#ifndef STATUS_ERROR +#define STATUS_ERROR 10 +#endif + +#define PM_S1 1 +#define PM_S3 3 + +/* + * Transport return codes + */ + +#define TRANSPORT_GOOD 0 /* Transport good, command good */ +#define TRANSPORT_FAILED 1 /* Transport good, command failed */ +#define TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */ +#define TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */ + + +/*----------------------------------- + Start-Stop-Unit +-----------------------------------*/ +#define STOP_MEDIUM 0x00 /* access disable */ +#define MAKE_MEDIUM_READY 0x01 /* access enable */ +#define UNLOAD_MEDIUM 0x02 /* unload */ +#define LOAD_MEDIUM 0x03 /* load */ + +/*----------------------------------- + STANDARD_INQUIRY +-----------------------------------*/ +#define QULIFIRE 0x00 +#define AENC_FNC 0x00 +#define TRML_IOP 0x00 +#define REL_ADR 0x00 +#define WBUS_32 0x00 +#define WBUS_16 0x00 +#define SYNC 0x00 +#define LINKED 0x00 +#define CMD_QUE 0x00 +#define SFT_RE 0x00 + +#define VEN_ID_LEN 8 /* Vendor ID Length */ +#define PRDCT_ID_LEN 16 /* Product ID Length */ +#define PRDCT_REV_LEN 4 /* Product LOT Length */ + +/* Dynamic flag definitions: used in set_bit() etc. */ +#define RTSX_FLIDX_TRANS_ACTIVE 18 /* 0x00040000 transfer is active */ +#define RTSX_FLIDX_ABORTING 20 /* 0x00100000 abort is in + * progress */ +#define RTSX_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect + * in progress */ +#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) | \ + (1UL << US_FLIDX_DISCONNECTING)) +#define RTSX_FLIDX_RESETTING 22 /* 0x00400000 device reset + * in progress */ +#define RTSX_FLIDX_TIMED_OUT 23 /* 0x00800000 SCSI + * midlayer timed out */ + +#define DRCT_ACCESS_DEV 0x00 /* Direct Access Device */ +#define RMB_DISC 0x80 /* The Device is Removable */ +#define ANSI_SCSI2 0x02 /* Based on ANSI-SCSI2 */ + +#define SCSI 0x00 /* Interface ID */ + +#define WRITE_PROTECTED_MEDIA 0x07 + +/*---- sense key ----*/ +#define ILI 0x20 /* ILI bit is on */ + +#define NO_SENSE 0x00 /* not exist sense key */ +#define RECOVER_ERR 0x01 /* Target/Logical unit is recoverd */ +#define NOT_READY 0x02 /* Logical unit is not ready */ +#define MEDIA_ERR 0x03 /* medium/data error */ +#define HARDWARE_ERR 0x04 /* hardware error */ +#define ILGAL_REQ 0x05 /* CDB/parameter/identify msg error */ +#define UNIT_ATTENTION 0x06 /* unit attention condition occur */ +#define DAT_PRTCT 0x07 /* read/write is desable */ +#define BLNC_CHK 0x08 /* find blank/DOF in read */ + /* write to unblank area */ +#define CPY_ABRT 0x0a /* Copy/Compare/Copy&Verify illgal */ +#define ABRT_CMD 0x0b /* Target make the command in error */ +#define EQUAL 0x0c /* Search Data end with Equal */ +#define VLM_OVRFLW 0x0d /* Some data are left in buffer */ +#define MISCMP 0x0e /* find inequality */ + +#define READ_ERR -1 +#define WRITE_ERR -2 + +#define FIRST_RESET 0x01 +#define USED_EXIST 0x02 + +/*----------------------------------- + SENSE_DATA +-----------------------------------*/ +/*---- valid ----*/ +#define SENSE_VALID 0x80 /* Sense data is valid as SCSI2 */ +#define SENSE_INVALID 0x00 /* Sense data is invalid as SCSI2 */ + +/*---- error code ----*/ +#define CUR_ERR 0x70 /* current error */ +#define DEF_ERR 0x71 /* specific command error */ + +/*---- sense key Information ----*/ +#define SNSKEYINFO_LEN 3 /* length of sense key information */ + +#define SKSV 0x80 +#define CDB_ILLEGAL 0x40 +#define DAT_ILLEGAL 0x00 +#define BPV 0x08 +#define BIT_ILLEGAL0 0 /* bit0 is illegal */ +#define BIT_ILLEGAL1 1 /* bit1 is illegal */ +#define BIT_ILLEGAL2 2 /* bit2 is illegal */ +#define BIT_ILLEGAL3 3 /* bit3 is illegal */ +#define BIT_ILLEGAL4 4 /* bit4 is illegal */ +#define BIT_ILLEGAL5 5 /* bit5 is illegal */ +#define BIT_ILLEGAL6 6 /* bit6 is illegal */ +#define BIT_ILLEGAL7 7 /* bit7 is illegal */ + +/*---- ASC ----*/ +#define ASC_NO_INFO 0x00 +#define ASC_MISCMP 0x1d +#define ASC_INVLD_CDB 0x24 +#define ASC_INVLD_PARA 0x26 +#define ASC_LU_NOT_READY 0x04 +#define ASC_WRITE_ERR 0x0c +#define ASC_READ_ERR 0x11 +#define ASC_LOAD_EJCT_ERR 0x53 +#define ASC_MEDIA_NOT_PRESENT 0x3A +#define ASC_MEDIA_CHANGED 0x28 +#define ASC_MEDIA_IN_PROCESS 0x04 +#define ASC_WRITE_PROTECT 0x27 +#define ASC_LUN_NOT_SUPPORTED 0x25 + +/*---- ASQC ----*/ +#define ASCQ_NO_INFO 0x00 +#define ASCQ_MEDIA_IN_PROCESS 0x01 +#define ASCQ_MISCMP 0x00 +#define ASCQ_INVLD_CDB 0x00 +#define ASCQ_INVLD_PARA 0x02 +#define ASCQ_LU_NOT_READY 0x02 +#define ASCQ_WRITE_ERR 0x02 +#define ASCQ_READ_ERR 0x00 +#define ASCQ_LOAD_EJCT_ERR 0x00 +#define ASCQ_WRITE_PROTECT 0x00 + + +struct sense_data_t { + unsigned char err_code; /* error code */ + /* bit7 : valid */ + /* (1 : SCSI2) */ + /* (0 : Vendor * specific) */ + /* bit6-0 : error * code */ + /* (0x70 : current * error) */ + /* (0x71 : specific command error) */ + unsigned char seg_no; /* segment No. */ + unsigned char sense_key; /* byte5 : ILI */ + /* bit3-0 : sense key */ + unsigned char info[4]; /* information */ + unsigned char ad_sense_len; /* additional sense data length */ + unsigned char cmd_info[4]; /* command specific information */ + unsigned char asc; /* ASC */ + unsigned char ascq; /* ASCQ */ + unsigned char rfu; /* FRU */ + unsigned char sns_key_info[3];/* sense key specific information */ +}; + +/* PCI Operation Register Address */ +#define RTSX_HCBAR 0x00 +#define RTSX_HCBCTLR 0x04 +#define RTSX_HDBAR 0x08 +#define RTSX_HDBCTLR 0x0C +#define RTSX_HAIMR 0x10 +#define RTSX_BIPR 0x14 +#define RTSX_BIER 0x18 + +/* Host command buffer control register */ +#define STOP_CMD (0x01 << 28) + +/* Host data buffer control register */ +#define SDMA_MODE 0x00 +#define ADMA_MODE (0x02 << 26) +#define STOP_DMA (0x01 << 28) +#define TRIG_DMA (0x01 << 31) + +/* Bus interrupt pending register */ +#define CMD_DONE_INT (1 << 31) +#define DATA_DONE_INT (1 << 30) +#define TRANS_OK_INT (1 << 29) +#define TRANS_FAIL_INT (1 << 28) +#define XD_INT (1 << 27) +#define MS_INT (1 << 26) +#define SD_INT (1 << 25) +#define GPIO0_INT (1 << 24) +#define OC_INT (1 << 23) +#define SD_WRITE_PROTECT (1 << 19) +#define XD_EXIST (1 << 18) +#define MS_EXIST (1 << 17) +#define SD_EXIST (1 << 16) +#define DELINK_INT GPIO0_INT +#define MS_OC_INT (1 << 23) +#define SD_OC_INT (1 << 22) + +#define CARD_INT (XD_INT | MS_INT | SD_INT) +#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) +#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | CARD_INT | GPIO0_INT | OC_INT) + +#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) + +/* Bus interrupt enable register */ +#define CMD_DONE_INT_EN (1 << 31) +#define DATA_DONE_INT_EN (1 << 30) +#define TRANS_OK_INT_EN (1 << 29) +#define TRANS_FAIL_INT_EN (1 << 28) +#define XD_INT_EN (1 << 27) +#define MS_INT_EN (1 << 26) +#define SD_INT_EN (1 << 25) +#define GPIO0_INT_EN (1 << 24) +#define OC_INT_EN (1 << 23) +#define DELINK_INT_EN GPIO0_INT_EN +#define MS_OC_INT_EN (1 << 23) +#define SD_OC_INT_EN (1 << 22) + + +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +#define HOST_TO_DEVICE 0 +#define DEVICE_TO_HOST 1 + + +#define RTSX_RESV_BUF_LEN 4096 +#define HOST_CMDS_BUF_LEN 1024 +#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) + +#define SD_NR 2 +#define MS_NR 3 +#define XD_NR 4 +#define SPI_NR 7 +#define SD_CARD (1 << SD_NR) +#define MS_CARD (1 << MS_NR) +#define XD_CARD (1 << XD_NR) +#define SPI_CARD (1 << SPI_NR) + +#define MAX_ALLOWED_LUN_CNT 8 + +#define XD_FREE_TABLE_CNT 1200 +#define MS_FREE_TABLE_CNT 512 + + +/* Bit Operation */ +#define SET_BIT(data, idx) ((data) |= 1 << (idx)) +#define CLR_BIT(data, idx) ((data) &= ~(1 << (idx))) +#define CHK_BIT(data, idx) ((data) & (1 << (idx))) + +/* SG descriptor */ +#define SG_INT 0x04 +#define SG_END 0x02 +#define SG_VALID 0x01 + +#define SG_NO_OP 0x00 +#define SG_TRANS_DATA (0x02 << 4) +#define SG_LINK_DESC (0x03 << 4) + +struct rtsx_chip; + +typedef int (*card_rw_func)(struct scsi_cmnd *srb, struct rtsx_chip *chip, + u32 sec_addr, u16 sec_cnt); + +/* Supported Clock */ +enum card_clock {CLK_20 = 1, CLK_30, CLK_40, CLK_50, CLK_60, + CLK_80, CLK_100, CLK_120, CLK_150, CLK_200}; + +enum RTSX_STAT {RTSX_STAT_INIT, RTSX_STAT_IDLE, RTSX_STAT_RUN, RTSX_STAT_SS, + RTSX_STAT_DELINK, RTSX_STAT_SUSPEND, + RTSX_STAT_ABORT, RTSX_STAT_DISCONNECT}; +enum IC_VER {IC_VER_AB, IC_VER_C = 2, IC_VER_D = 3}; + +#define MAX_RESET_CNT 3 + +/* For MS Card */ +#define MAX_DEFECTIVE_BLOCK 10 + +struct zone_entry { + u16 *l2p_table; + u16 *free_table; + u16 defect_list[MAX_DEFECTIVE_BLOCK]; /* For MS card only */ + int set_index; + int get_index; + int unused_blk_cnt; + int disable_count; + /* To indicate whether the L2P table of this zone has been built. */ + int build_flag; +}; + +#define TYPE_SD 0x0000 +#define TYPE_MMC 0x0001 + +/* TYPE_SD */ +#define SD_HS 0x0100 +#define SD_SDR50 0x0200 +#define SD_DDR50 0x0400 +#define SD_SDR104 0x0800 +#define SD_HCXC 0x1000 + +/* TYPE_MMC */ +#define MMC_26M 0x0100 +#define MMC_52M 0x0200 +#define MMC_4BIT 0x0400 +#define MMC_8BIT 0x0800 +#define MMC_SECTOR_MODE 0x1000 +#define MMC_DDR52 0x2000 + +/* SD card */ +#define CHK_SD(sd_card) (((sd_card)->sd_type & 0xFF) == TYPE_SD) +#define CHK_SD_HS(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_HS)) +#define CHK_SD_SDR50(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_SDR50)) +#define CHK_SD_DDR50(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_DDR50)) +#define CHK_SD_SDR104(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_SDR104)) +#define CHK_SD_HCXC(sd_card) (CHK_SD(sd_card) && ((sd_card)->sd_type & SD_HCXC)) +#define CHK_SD_HC(sd_card) (CHK_SD_HCXC(sd_card) && ((sd_card)->capacity <= 0x4000000)) +#define CHK_SD_XC(sd_card) (CHK_SD_HCXC(sd_card) && ((sd_card)->capacity > 0x4000000)) +#define CHK_SD30_SPEED(sd_card) (CHK_SD_SDR50(sd_card) || CHK_SD_DDR50(sd_card) || CHK_SD_SDR104(sd_card)) + +#define SET_SD(sd_card) ((sd_card)->sd_type = TYPE_SD) +#define SET_SD_HS(sd_card) ((sd_card)->sd_type |= SD_HS) +#define SET_SD_SDR50(sd_card) ((sd_card)->sd_type |= SD_SDR50) +#define SET_SD_DDR50(sd_card) ((sd_card)->sd_type |= SD_DDR50) +#define SET_SD_SDR104(sd_card) ((sd_card)->sd_type |= SD_SDR104) +#define SET_SD_HCXC(sd_card) ((sd_card)->sd_type |= SD_HCXC) + +#define CLR_SD_HS(sd_card) ((sd_card)->sd_type &= ~SD_HS) +#define CLR_SD_SDR50(sd_card) ((sd_card)->sd_type &= ~SD_SDR50) +#define CLR_SD_DDR50(sd_card) ((sd_card)->sd_type &= ~SD_DDR50) +#define CLR_SD_SDR104(sd_card) ((sd_card)->sd_type &= ~SD_SDR104) +#define CLR_SD_HCXC(sd_card) ((sd_card)->sd_type &= ~SD_HCXC) + +/* MMC card */ +#define CHK_MMC(sd_card) (((sd_card)->sd_type & 0xFF) == TYPE_MMC) +#define CHK_MMC_26M(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_26M)) +#define CHK_MMC_52M(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_52M)) +#define CHK_MMC_4BIT(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_4BIT)) +#define CHK_MMC_8BIT(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_8BIT)) +#define CHK_MMC_SECTOR_MODE(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_SECTOR_MODE)) +#define CHK_MMC_DDR52(sd_card) (CHK_MMC(sd_card) && ((sd_card)->sd_type & MMC_DDR52)) + +#define SET_MMC(sd_card) ((sd_card)->sd_type = TYPE_MMC) +#define SET_MMC_26M(sd_card) ((sd_card)->sd_type |= MMC_26M) +#define SET_MMC_52M(sd_card) ((sd_card)->sd_type |= MMC_52M) +#define SET_MMC_4BIT(sd_card) ((sd_card)->sd_type |= MMC_4BIT) +#define SET_MMC_8BIT(sd_card) ((sd_card)->sd_type |= MMC_8BIT) +#define SET_MMC_SECTOR_MODE(sd_card) ((sd_card)->sd_type |= MMC_SECTOR_MODE) +#define SET_MMC_DDR52(sd_card) ((sd_card)->sd_type |= MMC_DDR52) + +#define CLR_MMC_26M(sd_card) ((sd_card)->sd_type &= ~MMC_26M) +#define CLR_MMC_52M(sd_card) ((sd_card)->sd_type &= ~MMC_52M) +#define CLR_MMC_4BIT(sd_card) ((sd_card)->sd_type &= ~MMC_4BIT) +#define CLR_MMC_8BIT(sd_card) ((sd_card)->sd_type &= ~MMC_8BIT) +#define CLR_MMC_SECTOR_MODE(sd_card) ((sd_card)->sd_type &= ~MMC_SECTOR_MODE) +#define CLR_MMC_DDR52(sd_card) ((sd_card)->sd_type &= ~MMC_DDR52) + +#define CHK_MMC_HS(sd_card) (CHK_MMC_52M(sd_card) && CHK_MMC_26M(sd_card)) +#define CLR_MMC_HS(sd_card) \ +do { \ + CLR_MMC_DDR52(sd_card); \ + CLR_MMC_52M(sd_card); \ + CLR_MMC_26M(sd_card); \ +} while (0) + +#define SD_SUPPORT_CLASS_TEN 0x01 +#define SD_SUPPORT_1V8 0x02 + +#define SD_SET_CLASS_TEN(sd_card) ((sd_card)->sd_setting |= SD_SUPPORT_CLASS_TEN) +#define SD_CHK_CLASS_TEN(sd_card) ((sd_card)->sd_setting & SD_SUPPORT_CLASS_TEN) +#define SD_CLR_CLASS_TEN(sd_card) ((sd_card)->sd_setting &= ~SD_SUPPORT_CLASS_TEN) +#define SD_SET_1V8(sd_card) ((sd_card)->sd_setting |= SD_SUPPORT_1V8) +#define SD_CHK_1V8(sd_card) ((sd_card)->sd_setting & SD_SUPPORT_1V8) +#define SD_CLR_1V8(sd_card) ((sd_card)->sd_setting &= ~SD_SUPPORT_1V8) + +struct sd_info { + u16 sd_type; + u8 err_code; + u8 sd_data_buf_ready; + u32 sd_addr; + u32 capacity; + + u8 raw_csd[16]; + u8 raw_scr[8]; + + /* Sequential RW */ + int seq_mode; + enum dma_data_direction pre_dir; + u32 pre_sec_addr; + u16 pre_sec_cnt; + + int cleanup_counter; + + int sd_clock; + + int mmc_dont_switch_bus; + +#ifdef SUPPORT_CPRM + int sd_pass_thru_en; + int pre_cmd_err; + u8 last_rsp_type; + u8 rsp[17]; +#endif + + u8 func_group1_mask; + u8 func_group2_mask; + u8 func_group3_mask; + u8 func_group4_mask; + + u8 sd_switch_fail; + u8 sd_read_phase; + +#ifdef SUPPORT_SD_LOCK + u8 sd_lock_status; + u8 sd_erase_status; + u8 sd_lock_notify; +#endif + int need_retune; +}; + +struct xd_delay_write_tag { + u32 old_phyblock; + u32 new_phyblock; + u32 logblock; + u8 pageoff; + u8 delay_write_flag; +}; + +struct xd_info { + u8 maker_code; + u8 device_code; + u8 block_shift; + u8 page_off; + u8 addr_cycle; + u16 cis_block; + u8 multi_flag; + u8 err_code; + u32 capacity; + + struct zone_entry *zone; + int zone_cnt; + + struct xd_delay_write_tag delay_write; + int cleanup_counter; + + int xd_clock; +}; + +#define MODE_512_SEQ 0x01 +#define MODE_2K_SEQ 0x02 + +#define TYPE_MS 0x0000 +#define TYPE_MSPRO 0x0001 + +#define MS_4BIT 0x0100 +#define MS_8BIT 0x0200 +#define MS_HG 0x0400 +#define MS_XC 0x0800 + +#define HG8BIT (MS_HG | MS_8BIT) + +#define CHK_MSPRO(ms_card) (((ms_card)->ms_type & 0xFF) == TYPE_MSPRO) +#define CHK_HG8BIT(ms_card) (CHK_MSPRO(ms_card) && (((ms_card)->ms_type & HG8BIT) == HG8BIT)) +#define CHK_MSXC(ms_card) (CHK_MSPRO(ms_card) && ((ms_card)->ms_type & MS_XC)) +#define CHK_MSHG(ms_card) (CHK_MSPRO(ms_card) && ((ms_card)->ms_type & MS_HG)) + +#define CHK_MS8BIT(ms_card) (((ms_card)->ms_type & MS_8BIT)) +#define CHK_MS4BIT(ms_card) (((ms_card)->ms_type & MS_4BIT)) + +struct ms_delay_write_tag { + u16 old_phyblock; + u16 new_phyblock; + u16 logblock; + u8 pageoff; + u8 delay_write_flag; +}; + +struct ms_info { + u16 ms_type; + u8 block_shift; + u8 page_off; + u16 total_block; + u16 boot_block; + u32 capacity; + + u8 check_ms_flow; + u8 switch_8bit_fail; + u8 err_code; + + struct zone_entry *segment; + int segment_cnt; + + int pro_under_formatting; + int format_status; + u16 progress; + u8 raw_sys_info[96]; +#ifdef SUPPORT_PCGL_1P18 + u8 raw_model_name[48]; +#endif + + u8 multi_flag; + + /* Sequential RW */ + u8 seq_mode; + enum dma_data_direction pre_dir; + u32 pre_sec_addr; + u16 pre_sec_cnt; + u32 total_sec_cnt; + + struct ms_delay_write_tag delay_write; + + int cleanup_counter; + + int ms_clock; + +#ifdef SUPPORT_MAGIC_GATE + u8 magic_gate_id[16]; + u8 mg_entry_num; + int mg_auth; /* flag to indicate authentication process */ +#endif +}; + +struct spi_info { + u8 use_clk; + u8 write_en; + u16 clk_div; + u8 err_code; + + int spi_clock; +}; + + +#ifdef _MSG_TRACE +struct trace_msg_t { + u16 line; +#define MSG_FUNC_LEN 64 + char func[MSG_FUNC_LEN]; +#define MSG_FILE_LEN 32 + char file[MSG_FILE_LEN]; +#define TIME_VAL_LEN 16 + u8 timeval_buf[TIME_VAL_LEN]; + u8 valid; +}; +#endif + +/************/ +/* LUN mode */ +/************/ +/* Single LUN, support xD/SD/MS */ +#define DEFAULT_SINGLE 0 +/* 2 LUN mode, support SD/MS */ +#define SD_MS_2LUN 1 +/* Single LUN, but only support SD/MS, for Barossa LQFP */ +#define SD_MS_1LUN 2 + +#define LAST_LUN_MODE 2 + +/* Barossa package */ +#define QFN 0 +#define LQFP 1 + +/******************/ +/* sd_ctl bit map */ +/******************/ +/* SD push point control, bit 0, 1 */ +#define SD_PUSH_POINT_CTL_MASK 0x03 +#define SD_PUSH_POINT_DELAY 0x01 +#define SD_PUSH_POINT_AUTO 0x02 +/* SD sample point control, bit 2, 3 */ +#define SD_SAMPLE_POINT_CTL_MASK 0x0C +#define SD_SAMPLE_POINT_DELAY 0x04 +#define SD_SAMPLE_POINT_AUTO 0x08 +/* SD DDR Tx phase set by user, bit 4 */ +#define SD_DDR_TX_PHASE_SET_BY_USER 0x10 +/* MMC DDR Tx phase set by user, bit 5 */ +#define MMC_DDR_TX_PHASE_SET_BY_USER 0x20 +/* Support MMC DDR mode, bit 6 */ +#define SUPPORT_MMC_DDR_MODE 0x40 +/* Reset MMC at first */ +#define RESET_MMC_FIRST 0x80 + +#define SEQ_START_CRITERIA 0x20 + +/* MS Power Class En */ +#define POWER_CLASS_2_EN 0x02 +#define POWER_CLASS_1_EN 0x01 + +#define MAX_SHOW_CNT 10 +#define MAX_RESET_CNT 3 + +#define SDIO_EXIST 0x01 +#define SDIO_IGNORED 0x02 + +#define CHK_SDIO_EXIST(chip) ((chip)->sdio_func_exist & SDIO_EXIST) +#define SET_SDIO_EXIST(chip) ((chip)->sdio_func_exist |= SDIO_EXIST) +#define CLR_SDIO_EXIST(chip) ((chip)->sdio_func_exist &= ~SDIO_EXIST) + +#define CHK_SDIO_IGNORED(chip) ((chip)->sdio_func_exist & SDIO_IGNORED) +#define SET_SDIO_IGNORED(chip) ((chip)->sdio_func_exist |= SDIO_IGNORED) +#define CLR_SDIO_IGNORED(chip) ((chip)->sdio_func_exist &= ~SDIO_IGNORED) + +struct rtsx_chip { + rtsx_dev_t *rtsx; + + u32 int_reg; /* Bus interrupt pending register */ + char max_lun; + void *context; + + void *host_cmds_ptr; /* host commands buffer pointer */ + dma_addr_t host_cmds_addr; + int ci; /* Command Index */ + + void *host_sg_tbl_ptr; /* SG descriptor table */ + dma_addr_t host_sg_tbl_addr; + int sgi; /* SG entry index */ + + struct scsi_cmnd *srb; /* current srb */ + struct sense_data_t sense_buffer[MAX_ALLOWED_LUN_CNT]; + + int cur_clk; /* current card clock */ + + /* Current accessed card */ + int cur_card; + + unsigned long need_release; /* need release bit map */ + unsigned long need_reset; /* need reset + * bit map */ + /* Flag to indicate that this card is just resumed from SS state, + * and need released before being resetted + */ + unsigned long need_reinit; + + int rw_need_retry; + +#ifdef SUPPORT_OCP + u32 ocp_int; + u8 ocp_stat; +#endif + + u8 card_exist; /* card exist bit map (physical exist) */ + u8 card_ready; /* card ready bit map (reset successfully) */ + u8 card_fail; /* card reset fail bit map */ + u8 card_ejected; /* card ejected bit map */ + u8 card_wp; /* card write protected bit map */ + + u8 lun_mc; /* flag to indicate whether to answer + * MediaChange */ + +#ifndef LED_AUTO_BLINK + int led_toggle_counter; +#endif + + int sd_reset_counter; + int xd_reset_counter; + int ms_reset_counter; + + /* card bus width */ + u8 card_bus_width[MAX_ALLOWED_LUN_CNT]; + /* card capacity */ + u32 capacity[MAX_ALLOWED_LUN_CNT]; + /* read/write card function pointer */ + card_rw_func rw_card[MAX_ALLOWED_LUN_CNT]; + /* read/write capacity, used for GPIO Toggle */ + u32 rw_cap[MAX_ALLOWED_LUN_CNT]; + /* card to lun mapping table */ + u8 card2lun[32]; + /* lun to card mapping table */ + u8 lun2card[MAX_ALLOWED_LUN_CNT]; + + int rw_fail_cnt[MAX_ALLOWED_LUN_CNT]; + + int sd_show_cnt; + int xd_show_cnt; + int ms_show_cnt; + + /* card information */ + struct sd_info sd_card; + struct xd_info xd_card; + struct ms_info ms_card; + + struct spi_info spi; + +#ifdef _MSG_TRACE + struct trace_msg_t trace_msg[TRACE_ITEM_CNT]; + int msg_idx; +#endif + + int auto_delink_cnt; + int auto_delink_allowed; + + int aspm_enabled; + + int sdio_aspm; + int sdio_idle; + int sdio_counter; + u8 sdio_raw_data[12]; + + u8 sd_io; + u8 sd_int; + + u8 rtsx_flag; + + int ss_counter; + int idle_counter; + enum RTSX_STAT rtsx_stat; + + u16 vendor_id; + u16 product_id; + u8 ic_version; + + int driver_first_load; + +#ifdef HW_AUTO_SWITCH_SD_BUS + int sdio_in_charge; +#endif + + u8 aspm_level[2]; + + int chip_insert_with_sdio; + + /* Options */ + + int adma_mode; + + int auto_delink_en; + int ss_en; + u8 lun_mode; + u8 aspm_l0s_l1_en; + + int power_down_in_ss; + + int sdr104_en; + int ddr50_en; + int sdr50_en; + + int baro_pkg; + + int asic_code; + int phy_debug_mode; + int hw_bypass_sd; + int sdio_func_exist; + int aux_pwr_exist; + u8 ms_power_class_en; + + int mspro_formatter_enable; + + int remote_wakeup_en; + + int ignore_sd; + int use_hw_setting; + + int ss_idle_period; + + int dynamic_aspm; + + int fpga_sd_sdr104_clk; + int fpga_sd_ddr50_clk; + int fpga_sd_sdr50_clk; + int fpga_sd_hs_clk; + int fpga_mmc_52m_clk; + int fpga_ms_hg_clk; + int fpga_ms_4bit_clk; + int fpga_ms_1bit_clk; + + int asic_sd_sdr104_clk; + int asic_sd_ddr50_clk; + int asic_sd_sdr50_clk; + int asic_sd_hs_clk; + int asic_mmc_52m_clk; + int asic_ms_hg_clk; + int asic_ms_4bit_clk; + int asic_ms_1bit_clk; + + u8 ssc_depth_sd_sdr104; + u8 ssc_depth_sd_ddr50; + u8 ssc_depth_sd_sdr50; + u8 ssc_depth_sd_hs; + u8 ssc_depth_mmc_52m; + u8 ssc_depth_ms_hg; + u8 ssc_depth_ms_4bit; + u8 ssc_depth_low_speed; + + u8 card_drive_sel; + u8 sd30_drive_sel_1v8; + u8 sd30_drive_sel_3v3; + + u8 sd_400mA_ocp_thd; + u8 sd_800mA_ocp_thd; + u8 ms_ocp_thd; + + int ssc_en; + int msi_en; + + int xd_timeout; + int sd_timeout; + int ms_timeout; + int mspro_timeout; + + int auto_power_down; + + int sd_ddr_tx_phase; + int mmc_ddr_tx_phase; + int sd_default_tx_phase; + int sd_default_rx_phase; + + int pmos_pwr_on_interval; + int sd_voltage_switch_delay; + int s3_pwr_off_delay; + + int force_clkreq_0; + int ft2_fast_mode; + + int do_delink_before_power_down; + int polling_config; + int sdio_retry_cnt; + + int delink_stage1_step; + int delink_stage2_step; + int delink_stage3_step; + + int auto_delink_in_L1; + int hp_watch_bios_hotplug; + int support_ms_8bit; + + u8 blink_led; + u8 phy_voltage; + u8 max_payload; + + u32 sd_speed_prior; + u32 sd_current_prior; + u32 sd_ctl; +}; + +#define rtsx_set_stat(chip, stat) \ +do { \ + if ((stat) != RTSX_STAT_IDLE) { \ + (chip)->idle_counter = 0; \ + } \ + (chip)->rtsx_stat = (enum RTSX_STAT)(stat); \ +} while (0) +#define rtsx_get_stat(chip) ((chip)->rtsx_stat) +#define rtsx_chk_stat(chip, stat) ((chip)->rtsx_stat == (stat)) + +#define RTSX_SET_DELINK(chip) ((chip)->rtsx_flag |= 0x01) +#define RTSX_CLR_DELINK(chip) ((chip)->rtsx_flag &= 0xFE) +#define RTSX_TST_DELINK(chip) ((chip)->rtsx_flag & 0x01) + +#define CHECK_PID(chip, pid) ((chip)->product_id == (pid)) +#define CHECK_BARO_PKG(chip, pkg) ((chip)->baro_pkg == (pkg)) +#define CHECK_LUN_MODE(chip, mode) ((chip)->lun_mode == (mode)) + +/* Power down control */ +#define SSC_PDCTL 0x01 +#define OC_PDCTL 0x02 + +int rtsx_force_power_on(struct rtsx_chip *chip, u8 ctl); +int rtsx_force_power_down(struct rtsx_chip *chip, u8 ctl); + +void rtsx_disable_card_int(struct rtsx_chip *chip); +void rtsx_enable_card_int(struct rtsx_chip *chip); +void rtsx_enable_bus_int(struct rtsx_chip *chip); +void rtsx_disable_bus_int(struct rtsx_chip *chip); +int rtsx_reset_chip(struct rtsx_chip *chip); +int rtsx_init_chip(struct rtsx_chip *chip); +void rtsx_release_chip(struct rtsx_chip *chip); +void rtsx_polling_func(struct rtsx_chip *chip); +void rtsx_undo_delink(struct rtsx_chip *chip); +void rtsx_stop_cmd(struct rtsx_chip *chip, int card); +int rtsx_write_register(struct rtsx_chip *chip, u16 addr, u8 mask, u8 data); +int rtsx_read_register(struct rtsx_chip *chip, u16 addr, u8 *data); +int rtsx_write_cfg_dw(struct rtsx_chip *chip, + u8 func_no, u16 addr, u32 mask, u32 val); +int rtsx_read_cfg_dw(struct rtsx_chip *chip, u8 func_no, u16 addr, u32 *val); +int rtsx_write_cfg_seq(struct rtsx_chip *chip, + u8 func, u16 addr, u8 *buf, int len); +int rtsx_read_cfg_seq(struct rtsx_chip *chip, + u8 func, u16 addr, u8 *buf, int len); +int rtsx_write_phy_register(struct rtsx_chip *chip, u8 addr, u16 val); +int rtsx_read_phy_register(struct rtsx_chip *chip, u8 addr, u16 *val); +int rtsx_read_efuse(struct rtsx_chip *chip, u8 addr, u8 *val); +int rtsx_write_efuse(struct rtsx_chip *chip, u8 addr, u8 val); +int rtsx_clr_phy_reg_bit(struct rtsx_chip *chip, u8 reg, u8 bit); +int rtsx_set_phy_reg_bit(struct rtsx_chip *chip, u8 reg, u8 bit); +int rtsx_check_link_ready(struct rtsx_chip *chip); +void rtsx_enter_ss(struct rtsx_chip *chip); +void rtsx_exit_ss(struct rtsx_chip *chip); +int rtsx_pre_handle_interrupt(struct rtsx_chip *chip); +void rtsx_enter_L1(struct rtsx_chip *chip); +void rtsx_exit_L1(struct rtsx_chip *chip); +void rtsx_do_before_power_down(struct rtsx_chip *chip, int pm_stat); +void rtsx_enable_aspm(struct rtsx_chip *chip); +void rtsx_disable_aspm(struct rtsx_chip *chip); +int rtsx_read_ppbuf(struct rtsx_chip *chip, u8 *buf, int buf_len); +int rtsx_write_ppbuf(struct rtsx_chip *chip, u8 *buf, int buf_len); +int rtsx_check_chip_exist(struct rtsx_chip *chip); + +#define RTSX_WRITE_REG(chip, addr, mask, data) \ + do { \ + int retval = rtsx_write_register((chip), (addr), (mask), (data)); \ + if (retval != STATUS_SUCCESS) { \ + TRACE_RET((chip), retval); \ + } \ + } while (0) + +#define RTSX_READ_REG(chip, addr, data) \ + do { \ + int retval = rtsx_read_register((chip), (addr), (data)); \ + if (retval != STATUS_SUCCESS) { \ + TRACE_RET((chip), retval); \ + } \ + } while (0) + +#endif /* __REALTEK_RTSX_CHIP_H */ |