diff options
Diffstat (limited to 'drivers/staging/slicoss/slichw.h')
| -rw-r--r-- | drivers/staging/slicoss/slichw.h | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/drivers/staging/slicoss/slichw.h b/drivers/staging/slicoss/slichw.h index f06450e..ae04bf6 100644 --- a/drivers/staging/slicoss/slichw.h +++ b/drivers/staging/slicoss/slichw.h @@ -402,225 +402,6 @@ struct slic_rspbuf { #define SLIC_REG_HOSTID 0x1554 -struct slic_regs { - u32 slic_reset; /* Reset Register */ - u32 pad0; - - u32 slic_icr; /* Interrupt Control Register */ - u32 pad2; -#define SLIC_ICR 0x0008 - - u32 slic_isp; /* Interrupt status pointer */ - u32 pad1; -#define SLIC_ISP 0x0010 - - u32 slic_isr; /* Interrupt status */ - u32 pad3; -#define SLIC_ISR 0x0018 - - u32 slic_hbar; /* Header buffer address reg */ - u32 pad4; - /* - * 31-8 - phy addr of set of contiguous hdr buffers - * 7-0 - number of buffers passed - * Buffers are 256 bytes long on 256-byte boundaries. - */ -#define SLIC_HBAR 0x0020 -#define SLIC_HBAR_CNT_MSK 0x000000FF - - u32 slic_dbar; /* Data buffer handle & address reg */ - u32 pad5; - - /* 4 sets of registers; Buffers are 2K bytes long 2 per 4K page. */ -#define SLIC_DBAR 0x0028 -#define SLIC_DBAR_SIZE 2048 - - u32 slic_cbar; /* Xmt Cmd buf addr regs.*/ - /* - * 1 per XMT interface - * 31-5 - phy addr of host command buffer - * 4-0 - length of cmd in multiples of 32 bytes - * Buffers are 32 bytes up to 512 bytes long - */ -#define SLIC_CBAR 0x0030 -#define SLIC_CBAR_LEN_MSK 0x0000001F -#define SLIC_CBAR_ALIGN 0x00000020 - - u32 slic_wcs; /* write control store*/ -#define SLIC_WCS 0x0034 -#define SLIC_WCS_START 0x80000000 /*Start the SLIC (Jump to WCS)*/ -#define SLIC_WCS_COMPARE 0x40000000 /* Compare with value in WCS*/ - - u32 slic_rbar; /* Response buffer address reg.*/ - u32 pad7; - /* - * 31-8 - phy addr of set of contiguous response buffers - * 7-0 - number of buffers passed - * Buffers are 32 bytes long on 32-byte boundaries. - */ -#define SLIC_RBAR 0x0038 -#define SLIC_RBAR_CNT_MSK 0x000000FF -#define SLIC_RBAR_SIZE 32 - - u32 slic_stats; /* read statistics (UPR) */ - u32 pad8; -#define SLIC_RSTAT 0x0040 - - u32 slic_rlsr; /* read link status */ - u32 pad9; -#define SLIC_LSTAT 0x0048 - - u32 slic_wmcfg; /* Write Mac Config */ - u32 pad10; -#define SLIC_WMCFG 0x0050 - - u32 slic_wphy; /* Write phy register */ - u32 pad11; -#define SLIC_WPHY 0x0058 - - u32 slic_rcbar; /* Rcv Cmd buf addr reg */ - u32 pad12; -#define SLIC_RCBAR 0x0060 - - u32 slic_rconfig; /* Read SLIC Config*/ - u32 pad13; -#define SLIC_RCONFIG 0x0068 - - u32 slic_intagg; /* Interrupt aggregation time */ - u32 pad14; -#define SLIC_INTAGG 0x0070 - - u32 slic_wxcfg; /* Write XMIT config reg*/ - u32 pad16; -#define SLIC_WXCFG 0x0078 - - u32 slic_wrcfg; /* Write RCV config reg*/ - u32 pad17; -#define SLIC_WRCFG 0x0080 - - u32 slic_wraddral; /* Write rcv addr a low*/ - u32 pad18; -#define SLIC_WRADDRAL 0x0088 - - u32 slic_wraddrah; /* Write rcv addr a high*/ - u32 pad19; -#define SLIC_WRADDRAH 0x0090 - - u32 slic_wraddrbl; /* Write rcv addr b low*/ - u32 pad20; -#define SLIC_WRADDRBL 0x0098 - - u32 slic_wraddrbh; /* Write rcv addr b high*/ - u32 pad21; -#define SLIC_WRADDRBH 0x00a0 - - u32 slic_mcastlow; /* Low bits of mcast mask*/ - u32 pad22; -#define SLIC_MCASTLOW 0x00a8 - - u32 slic_mcasthigh; /* High bits of mcast mask*/ - u32 pad23; -#define SLIC_MCASTHIGH 0x00b0 - - u32 slic_ping; /* Ping the card*/ - u32 pad24; -#define SLIC_PING 0x00b8 - - u32 slic_dump_cmd; /* Dump command */ - u32 pad25; -#define SLIC_DUMP_CMD 0x00c0 - - u32 slic_dump_data; /* Dump data pointer */ - u32 pad26; -#define SLIC_DUMP_DATA 0x00c8 - - u32 slic_pcistatus; /* Read card's pci_status register */ - u32 pad27; -#define SLIC_PCISTATUS 0x00d0 - - u32 slic_wrhostid; /* Write hostid field */ - u32 pad28; -#define SLIC_WRHOSTID 0x00d8 -#define SLIC_RDHOSTID_1GB 0x1554 -#define SLIC_RDHOSTID_2GB 0x1554 - - u32 slic_low_power; /* Put card in a low power state */ - u32 pad29; -#define SLIC_LOW_POWER 0x00e0 - - u32 slic_quiesce; /* force slic into quiescent state - * before soft reset - */ - u32 pad30; -#define SLIC_QUIESCE 0x00e8 - - u32 slic_reset_iface;/* reset interface queues */ - u32 pad31; -#define SLIC_RESET_IFACE 0x00f0 - - u32 slic_addr_upper;/* Bits 63-32 for host i/f addrs */ - u32 pad32; -#define SLIC_ADDR_UPPER 0x00f8 /*Register is only written when it has changed*/ - - u32 slic_hbar64; /* 64 bit Header buffer address reg */ - u32 pad33; -#define SLIC_HBAR64 0x0100 - - u32 slic_dbar64; /* 64 bit Data buffer handle & address reg */ - u32 pad34; -#define SLIC_DBAR64 0x0108 - - u32 slic_cbar64; /* 64 bit Xmt Cmd buf addr regs. */ - u32 pad35; -#define SLIC_CBAR64 0x0110 - - u32 slic_rbar64; /* 64 bit Response buffer address reg.*/ - u32 pad36; -#define SLIC_RBAR64 0x0118 - - u32 slic_rcbar64; /* 64 bit Rcv Cmd buf addr reg*/ - u32 pad37; -#define SLIC_RCBAR64 0x0120 - - u32 slic_stats64; /* read statistics (64 bit UPR) */ - u32 pad38; -#define SLIC_RSTAT64 0x0128 - - u32 slic_rcv_wcs; /*Download Gigabit RCV sequencer ucode*/ - u32 pad39; -#define SLIC_RCV_WCS 0x0130 -#define SLIC_RCVWCS_BEGIN 0x40000000 -#define SLIC_RCVWCS_FINISH 0x80000000 - - u32 slic_wrvlanid; /* Write VlanId field */ - u32 pad40; -#define SLIC_WRVLANID 0x0138 - - u32 slic_read_xf_info; /* Read Transformer info */ - u32 pad41; -#define SLIC_READ_XF_INFO 0x0140 - - u32 slic_write_xf_info; /* Write Transformer info */ - u32 pad42; -#define SLIC_WRITE_XF_INFO 0x0148 - - u32 RSVD1; /* TOE Only */ - u32 pad43; - - u32 RSVD2; /* TOE Only */ - u32 pad44; - - u32 RSVD3; /* TOE Only */ - u32 pad45; - - u32 RSVD4; /* TOE Only */ - u32 pad46; - - u32 slic_ticks_per_sec; /* Write card ticks per second */ - u32 pad47; -#define SLIC_TICKS_PER_SEC 0x0170 -}; - enum UPR_REQUEST { SLIC_UPR_STATS, SLIC_UPR_RLSR, |