diff options
Diffstat (limited to 'drivers/thermal')
-rw-r--r-- | drivers/thermal/ti-soc-thermal/omap5-thermal-data.c | 3 | ||||
-rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.c | 41 | ||||
-rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 |
3 files changed, 45 insertions, 3 deletions
diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c index eff0c80..79ff70c 100644 --- a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c @@ -319,7 +319,8 @@ const struct ti_bandgap_data omap5430_data = { TI_BANDGAP_FEATURE_FREEZE_BIT | TI_BANDGAP_FEATURE_TALERT | TI_BANDGAP_FEATURE_COUNTER_DELAY | - TI_BANDGAP_FEATURE_HISTORY_BUFFER, + TI_BANDGAP_FEATURE_HISTORY_BUFFER | + TI_BANDGAP_FEATURE_ERRATA_813, .fclock_name = "l3instr_ts_gclk_div", .div_ck_name = "l3instr_ts_gclk_div", .conv_table = omap5430_adc_to_temp, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 9747523..bc14dc8 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -445,7 +445,7 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, { struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data; struct temp_sensor_registers *tsr; - u32 thresh_val, reg_val, t_hot, t_cold; + u32 thresh_val, reg_val, t_hot, t_cold, ctrl; int err = 0; tsr = bgp->conf->sensors[id].registers; @@ -477,8 +477,47 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask); reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) | (t_cold << __ffs(tsr->threshold_tcold_mask)); + + /** + * Errata i813: + * Spurious Thermal Alert: Talert can happen randomly while the device + * remains under the temperature limit defined for this event to trig. + * This spurious event is caused by a incorrect re-synchronization + * between clock domains. The comparison between configured threshold + * and current temperature value can happen while the value is + * transitioning (metastable), thus causing inappropriate event + * generation. No spurious event occurs as long as the threshold value + * stays unchanged. Spurious event can be generated while a thermal + * alert threshold is modified in + * CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n. + */ + + if (TI_BANDGAP_HAS(bgp, ERRATA_813)) { + /* Mask t_hot and t_cold events at the IP Level */ + ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + + if (hot) + ctrl &= ~tsr->mask_hot_mask; + else + ctrl &= ~tsr->mask_cold_mask; + + ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); + } + + /* Write the threshold value */ ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold); + if (TI_BANDGAP_HAS(bgp, ERRATA_813)) { + /* Unmask t_hot and t_cold events at the IP Level */ + ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl); + if (hot) + ctrl |= tsr->mask_hot_mask; + else + ctrl |= tsr->mask_cold_mask; + + ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl); + } + if (err) { dev_err(bgp->dev, "failed to reprogram thot threshold\n"); err = -EIO; diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index b2da3fc..0c52f7a 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -320,7 +320,8 @@ struct ti_temp_sensor { * * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device * has Errata 814 - * + * TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device + * has Errata 813 * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ @@ -335,6 +336,7 @@ struct ti_temp_sensor { #define TI_BANDGAP_FEATURE_COUNTER_DELAY BIT(8) #define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) #define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) +#define TI_BANDGAP_FEATURE_ERRATA_813 BIT(11) #define TI_BANDGAP_HAS(b, f) \ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) |