diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_dma.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 10 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/ifx6x60.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/imx.c | 20 | ||||
| -rw-r--r-- | drivers/tty/serial/max3100.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/max310x.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/sc16is7xx.c | 1 |
8 files changed, 26 insertions, 15 deletions
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index 21d01a4..e508939 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -80,10 +80,6 @@ int serial8250_tx_dma(struct uart_8250_port *p) return 0; dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (dma->tx_size < p->port.fifosize) { - ret = -EINVAL; - goto err; - } desc = dmaengine_prep_slave_single(dma->txchan, dma->tx_addr + xmit->tail, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 54e6c8d..0bbf340 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -261,6 +261,14 @@ configured less than Maximum supported fifo bytes */ UART_FCR7_64BYTE, .flags = UART_CAP_FIFO, }, + [PORT_RT2880] = { + .name = "Palmchip BK-3103", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ @@ -2910,3 +2918,5 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe) } #endif /* CONFIG_SERIAL_8250_CONSOLE */ + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 5ca5cf3..538ea03 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2786,7 +2786,7 @@ static int atmel_serial_probe(struct platform_device *pdev) ret = atmel_init_gpios(port, &pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "Failed to initialize GPIOs."); - goto err; + goto err_clear_bit; } ret = atmel_init_port(port, pdev); diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 536a33b..88246f7 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1362,7 +1362,7 @@ static struct spi_driver ifx_spi_driver = { .driver = { .name = DRVNAME, .pm = &ifx_spi_pm, - .owner = THIS_MODULE}, + }, .probe = ifx_spi_spi_probe, .shutdown = ifx_spi_spi_shutdown, .remove = ifx_spi_spi_remove, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index fe3d41c..d0388a0 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1631,12 +1631,12 @@ imx_console_write(struct console *co, const char *s, unsigned int count) int locked = 1; int retval; - retval = clk_prepare_enable(sport->clk_per); + retval = clk_enable(sport->clk_per); if (retval) return; - retval = clk_prepare_enable(sport->clk_ipg); + retval = clk_enable(sport->clk_ipg); if (retval) { - clk_disable_unprepare(sport->clk_per); + clk_disable(sport->clk_per); return; } @@ -1675,8 +1675,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count) if (locked) spin_unlock_irqrestore(&sport->port.lock, flags); - clk_disable_unprepare(sport->clk_ipg); - clk_disable_unprepare(sport->clk_per); + clk_disable(sport->clk_ipg); + clk_disable(sport->clk_per); } /* @@ -1777,7 +1777,15 @@ imx_console_setup(struct console *co, char *options) retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); - clk_disable_unprepare(sport->clk_ipg); + clk_disable(sport->clk_ipg); + if (retval) { + clk_unprepare(sport->clk_ipg); + goto error_console; + } + + retval = clk_prepare(sport->clk_per); + if (retval) + clk_disable_unprepare(sport->clk_ipg); error_console: return retval; diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 0773772..5c4c280 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -904,7 +904,6 @@ static SIMPLE_DEV_PM_OPS(max3100_pm_ops, max3100_suspend, max3100_resume); static struct spi_driver max3100_driver = { .driver = { .name = "max3100", - .owner = THIS_MODULE, .pm = MAX3100_PM_OPS, }, .probe = max3100_probe, diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 182549f..d451330 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1338,7 +1338,6 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table); static struct spi_driver max310x_uart_driver = { .driver = { .name = MAX310X_NAME, - .owner = THIS_MODULE, .of_match_table = of_match_ptr(max310x_dt_ids), .pm = &max310x_pm_ops, }, diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 72ffd0d..55b61d7 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1357,7 +1357,6 @@ MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table); static struct spi_driver sc16is7xx_spi_uart_driver = { .driver = { .name = SC16IS7XX_NAME, - .owner = THIS_MODULE, .of_match_table = of_match_ptr(sc16is7xx_dt_ids), }, .probe = sc16is7xx_spi_probe, |