diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/amiserial.c | 3 | ||||
-rw-r--r-- | drivers/tty/n_tty.c | 22 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 2 | ||||
-rw-r--r-- | drivers/tty/serial/pmac_zilog.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/serial-tegra.c | 38 | ||||
-rw-r--r-- | drivers/tty/tty_io.c | 1 |
6 files changed, 38 insertions, 31 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 2b86f8e..71630a2 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1855,6 +1855,9 @@ static struct console sercons = { */ static int __init amiserial_console_init(void) { + if (!MACH_IS_AMIGA) + return -ENODEV; + register_console(&sercons); return 0; } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 7cdd1eb..268b627 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -768,7 +768,7 @@ static size_t __process_echoes(struct tty_struct *tty) * data at the tail to prevent a subsequent overrun */ while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) { if (echo_buf(ldata, tail) == ECHO_OP_START) { - if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB) + if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB) tail += 3; else tail += 2; @@ -810,7 +810,8 @@ static void process_echoes(struct tty_struct *tty) struct n_tty_data *ldata = tty->disc_data; size_t echoed; - if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail) + if ((!L_ECHO(tty) && !L_ECHONL(tty)) || + ldata->echo_commit == ldata->echo_tail) return; mutex_lock(&ldata->output_lock); @@ -825,7 +826,8 @@ static void flush_echoes(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_head) + if ((!L_ECHO(tty) && !L_ECHONL(tty)) || + ldata->echo_commit == ldata->echo_head) return; mutex_lock(&ldata->output_lock); @@ -1998,7 +2000,10 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, found = 1; size = N_TTY_BUF_SIZE - tail; - n = (found + eol + size) & (N_TTY_BUF_SIZE - 1); + n = eol - tail; + if (n > 4096) + n += 4096; + n += found; c = n; if (found && read_buf(ldata, eol) == __DISABLED_CHAR) { @@ -2243,18 +2248,19 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (time) timeout = time; } - mutex_unlock(&ldata->atomic_read_lock); - remove_wait_queue(&tty->read_wait, &wait); + n_tty_set_room(tty); + up_read(&tty->termios_rwsem); + remove_wait_queue(&tty->read_wait, &wait); if (!waitqueue_active(&tty->read_wait)) ldata->minimum_to_wake = minimum; + mutex_unlock(&ldata->atomic_read_lock); + __set_current_state(TASK_RUNNING); if (b - buf) retval = b - buf; - n_tty_set_room(tty); - up_read(&tty->termios_rwsem); return retval; } diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index f3b306e..2332991 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -41,7 +41,7 @@ config SERIAL_8250_DEPRECATED_OPTIONS accept kernel parameters in both forms like 8250_core.nr_uarts=4 and 8250.nr_uarts=4. We now renamed the module back to 8250, but if anybody noticed in 3.7 and changed their userspace we still have to - keep the 8350_core.* options around until they revert the changes + keep the 8250_core.* options around until they revert the changes they already did. If 8250 is built as a module, this adds 8250_core alias instead. diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 481b781..e9d420f 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -2052,6 +2052,9 @@ static int __init pmz_console_init(void) /* Probe ports */ pmz_probe(); + if (pmz_ports_count == 0) + return -ENODEV; + /* TODO: Autoprobe console based on OF */ /* pmz_console.index = i; */ register_console(&pmz_console); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index dfe79cc..d5c2a28 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -34,6 +34,7 @@ #include <linux/of_device.h> #include <linux/pagemap.h> #include <linux/platform_device.h> +#include <linux/reset.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> @@ -44,8 +45,6 @@ #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/clk/tegra.h> - #define TEGRA_UART_TYPE "TEGRA_UART" #define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE) #define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3) @@ -103,6 +102,7 @@ struct tegra_uart_port { const struct tegra_uart_chip_data *cdata; struct clk *uart_clk; + struct reset_control *rst; unsigned int current_baud; /* Register shadow */ @@ -120,7 +120,6 @@ struct tegra_uart_port { bool rx_timeout; int rx_in_progress; int symb_bit; - int dma_req_sel; struct dma_chan *rx_dma_chan; struct dma_chan *tx_dma_chan; @@ -832,9 +831,9 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) clk_prepare_enable(tup->uart_clk); /* Reset the UART controller to clear all previous status.*/ - tegra_periph_reset_assert(tup->uart_clk); + reset_control_assert(tup->rst); udelay(10); - tegra_periph_reset_deassert(tup->uart_clk); + reset_control_deassert(tup->rst); tup->rx_in_progress = 0; tup->tx_in_progress = 0; @@ -910,15 +909,14 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, dma_addr_t dma_phys; int ret; struct dma_slave_config dma_sconfig; - dma_cap_mask_t mask; - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - dma_chan = dma_request_channel(mask, NULL, NULL); - if (!dma_chan) { + dma_chan = dma_request_slave_channel_reason(tup->uport.dev, + dma_to_memory ? "rx" : "tx"); + if (IS_ERR(dma_chan)) { + ret = PTR_ERR(dma_chan); dev_err(tup->uport.dev, - "Dma channel is not available, will try later\n"); - return -EPROBE_DEFER; + "DMA channel alloc failed: %d\n", ret); + return ret; } if (dma_to_memory) { @@ -938,7 +936,6 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, dma_buf = tup->uport.state->xmit.buf; } - dma_sconfig.slave_id = tup->dma_req_sel; if (dma_to_memory) { dma_sconfig.src_addr = tup->uport.mapbase; dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; @@ -1222,17 +1219,8 @@ static int tegra_uart_parse_dt(struct platform_device *pdev, struct tegra_uart_port *tup) { struct device_node *np = pdev->dev.of_node; - u32 of_dma[2]; int port; - if (of_property_read_u32_array(np, "nvidia,dma-request-selector", - of_dma, 2) >= 0) { - tup->dma_req_sel = of_dma[1]; - } else { - dev_err(&pdev->dev, "missing dma requestor in device tree\n"); - return -EINVAL; - } - port = of_alias_get_id(np, "serial"); if (port < 0) { dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port); @@ -1320,6 +1308,12 @@ static int tegra_uart_probe(struct platform_device *pdev) return PTR_ERR(tup->uart_clk); } + tup->rst = devm_reset_control_get(&pdev->dev, "serial"); + if (IS_ERR(tup->rst)) { + dev_err(&pdev->dev, "Couldn't get the reset\n"); + return PTR_ERR(tup->rst); + } + u->iotype = UPIO_MEM32; u->irq = platform_get_irq(pdev, 0); u->regshift = 2; diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 3a1a01a..c74a00a 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2086,6 +2086,7 @@ retry_open: filp->f_op = &tty_fops; goto retry_open; } + clear_bit(TTY_HUPPED, &tty->flags); tty_unlock(tty); |