summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_console.c2
-rw-r--r--drivers/tty/n_tty.c4
-rw-r--r--drivers/tty/serial/8250/8250_core.c4
-rw-r--r--drivers/tty/serial/8250/8250_dma.c9
-rw-r--r--drivers/tty/serial/samsung.c23
-rw-r--r--drivers/tty/serial/serial_core.c39
-rw-r--r--drivers/tty/tty_buffer.c17
7 files changed, 61 insertions, 37 deletions
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 94f9e3a..0ff7fda 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -190,7 +190,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index)
return hvc_driver;
}
-static int __init hvc_console_setup(struct console *co, char *options)
+static int hvc_console_setup(struct console *co, char *options)
{
if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES)
return -ENODEV;
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 41fe8a0..fe9d129 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2353,8 +2353,12 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
} else {
+ struct n_tty_data *ldata = tty->disc_data;
+
while (nr > 0) {
+ mutex_lock(&ldata->output_lock);
c = tty->ops->write(tty, b, nr);
+ mutex_unlock(&ldata->output_lock);
if (c < 0) {
retval = c;
goto break_out;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 81f909c..2d4bd39 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -555,7 +555,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
*/
if ((p->port.type == PORT_XR17V35X) ||
(p->port.type == PORT_XR17D15X)) {
- serial_out(p, UART_EXAR_SLEEP, 0xff);
+ serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0);
return;
}
@@ -1520,7 +1520,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
status = serial8250_rx_chars(up, status);
}
serial8250_modem_status(up);
- if (status & UART_LSR_THRE)
+ if (!up->dma && (status & UART_LSR_THRE))
serial8250_tx_chars(up);
spin_unlock_irqrestore(&port->lock, flags);
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 7046769..ab9096d 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -20,12 +20,15 @@ static void __dma_tx_complete(void *param)
struct uart_8250_port *p = param;
struct uart_8250_dma *dma = p->dma;
struct circ_buf *xmit = &p->port.state->xmit;
-
- dma->tx_running = 0;
+ unsigned long flags;
dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr,
UART_XMIT_SIZE, DMA_TO_DEVICE);
+ spin_lock_irqsave(&p->port.lock, flags);
+
+ dma->tx_running = 0;
+
xmit->tail += dma->tx_size;
xmit->tail &= UART_XMIT_SIZE - 1;
p->port.icount.tx += dma->tx_size;
@@ -35,6 +38,8 @@ static void __dma_tx_complete(void *param)
if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port))
serial8250_tx_dma(p);
+
+ spin_unlock_irqrestore(&p->port.lock, flags);
}
static void __dma_rx_complete(void *param)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 23f4596..1f5505e 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1446,8 +1446,8 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port)
static void s3c24xx_serial_put_poll_char(struct uart_port *port,
unsigned char c)
{
- unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
- unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+ unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+ unsigned int ucon = rd_regl(port, S3C2410_UCON);
/* not possible to xmit on unconfigured port */
if (!s3c24xx_port_configured(ucon))
@@ -1455,7 +1455,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
- wr_regb(cons_uart, S3C2410_UTXH, c);
+ wr_regb(port, S3C2410_UTXH, c);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1463,22 +1463,23 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
static void
s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
{
- unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
- unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
-
- /* not possible to xmit on unconfigured port */
- if (!s3c24xx_port_configured(ucon))
- return;
+ unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
while (!s3c24xx_serial_console_txrdy(port, ufcon))
- barrier();
- wr_regb(cons_uart, S3C2410_UTXH, ch);
+ cpu_relax();
+ wr_regb(port, S3C2410_UTXH, ch);
}
static void
s3c24xx_serial_console_write(struct console *co, const char *s,
unsigned int count)
{
+ unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+ /* not possible to xmit on unconfigured port */
+ if (!s3c24xx_port_configured(ucon))
+ return;
+
uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f26834d..b68550d 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -137,6 +137,11 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
return 1;
/*
+ * Make sure the device is in D0 state.
+ */
+ uart_change_pm(state, UART_PM_STATE_ON);
+
+ /*
* Initialise and allocate the transmit and temporary
* buffer.
*/
@@ -825,25 +830,29 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
* If we fail to request resources for the
* new port, try to restore the old settings.
*/
- if (retval && old_type != PORT_UNKNOWN) {
+ if (retval) {
uport->iobase = old_iobase;
uport->type = old_type;
uport->hub6 = old_hub6;
uport->iotype = old_iotype;
uport->regshift = old_shift;
uport->mapbase = old_mapbase;
- retval = uport->ops->request_port(uport);
- /*
- * If we failed to restore the old settings,
- * we fail like this.
- */
- if (retval)
- uport->type = PORT_UNKNOWN;
- /*
- * We failed anyway.
- */
- retval = -EBUSY;
+ if (old_type != PORT_UNKNOWN) {
+ retval = uport->ops->request_port(uport);
+ /*
+ * If we failed to restore the old settings,
+ * we fail like this.
+ */
+ if (retval)
+ uport->type = PORT_UNKNOWN;
+
+ /*
+ * We failed anyway.
+ */
+ retval = -EBUSY;
+ }
+
/* Added to return the correct error -Ram Gupta */
goto exit;
}
@@ -1571,12 +1580,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
}
/*
- * Make sure the device is in D0 state.
- */
- if (port->count == 1)
- uart_change_pm(state, UART_PM_STATE_ON);
-
- /*
* Start up the serial port.
*/
retval = uart_startup(tty, state, 0);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 8ebd9f8..cf78d19 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -258,7 +258,11 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size,
n->flags = flags;
buf->tail = n;
b->commit = b->used;
- smp_mb();
+ /* paired w/ barrier in flush_to_ldisc(); ensures the
+ * latest commit value can be read before the head is
+ * advanced to the next buffer
+ */
+ smp_wmb();
b->next = n;
} else if (change)
size = 0;
@@ -444,17 +448,24 @@ static void flush_to_ldisc(struct work_struct *work)
while (1) {
struct tty_buffer *head = buf->head;
+ struct tty_buffer *next;
int count;
/* Ldisc or user is trying to gain exclusive access */
if (atomic_read(&buf->priority))
break;
+ next = head->next;
+ /* paired w/ barrier in __tty_buffer_request_room();
+ * ensures commit value read is not stale if the head
+ * is advancing to the next buffer
+ */
+ smp_rmb();
count = head->commit - head->read;
if (!count) {
- if (head->next == NULL)
+ if (next == NULL)
break;
- buf->head = head->next;
+ buf->head = next;
tty_buffer_free(port, head);
continue;
}
generated by cgit v0.10.2 at 2024-10-31 05:36:14 (GMT)