summaryrefslogtreecommitdiff
path: root/drivers/usb/core
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core')
-rw-r--r--drivers/usb/core/devio.c54
-rw-r--r--drivers/usb/core/driver.c7
-rw-r--r--drivers/usb/core/file.c8
-rw-r--r--drivers/usb/core/hcd-pci.c3
-rw-r--r--drivers/usb/core/hcd.c122
-rw-r--r--drivers/usb/core/hub.c185
-rw-r--r--drivers/usb/core/message.c4
-rw-r--r--drivers/usb/core/quirks.c43
-rw-r--r--drivers/usb/core/sysfs.c64
-rw-r--r--drivers/usb/core/urb.c44
-rw-r--r--drivers/usb/core/usb.c2
-rw-r--r--drivers/usb/core/usb.h1
12 files changed, 341 insertions, 196 deletions
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 737e3c1..967152a 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -742,6 +742,22 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
if ((index & ~USB_DIR_IN) == 0)
return 0;
ret = findintfep(ps->dev, index);
+ if (ret < 0) {
+ /*
+ * Some not fully compliant Win apps seem to get
+ * index wrong and have the endpoint number here
+ * rather than the endpoint address (with the
+ * correct direction). Win does let this through,
+ * so we'll not reject it here but leave it to
+ * the device to not break KVM. But we warn.
+ */
+ ret = findintfep(ps->dev, index ^ 0x80);
+ if (ret >= 0)
+ dev_info(&ps->dev->dev,
+ "%s: process %i (%s) requesting ep %02x but needs %02x\n",
+ __func__, task_pid_nr(current),
+ current->comm, index, index ^ 0x80);
+ }
if (ret >= 0)
ret = checkintf(ps, ret);
break;
@@ -898,10 +914,8 @@ static int proc_control(struct dev_state *ps, void __user *arg)
snoop(&dev->dev, "control urb: bRequestType=%02x "
"bRequest=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
- ctrl.bRequestType, ctrl.bRequest,
- __le16_to_cpup(&ctrl.wValue),
- __le16_to_cpup(&ctrl.wIndex),
- __le16_to_cpup(&ctrl.wLength));
+ ctrl.bRequestType, ctrl.bRequest, ctrl.wValue,
+ ctrl.wIndex, ctrl.wLength);
if (ctrl.bRequestType & 0x80) {
if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data,
ctrl.wLength)) {
@@ -1620,32 +1634,32 @@ static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
static int proc_control_compat(struct dev_state *ps,
struct usbdevfs_ctrltransfer32 __user *p32)
{
- struct usbdevfs_ctrltransfer __user *p;
- __u32 udata;
- p = compat_alloc_user_space(sizeof(*p));
- if (copy_in_user(p, p32, (sizeof(*p32) - sizeof(compat_caddr_t))) ||
- get_user(udata, &p32->data) ||
+ struct usbdevfs_ctrltransfer __user *p;
+ __u32 udata;
+ p = compat_alloc_user_space(sizeof(*p));
+ if (copy_in_user(p, p32, (sizeof(*p32) - sizeof(compat_caddr_t))) ||
+ get_user(udata, &p32->data) ||
put_user(compat_ptr(udata), &p->data))
return -EFAULT;
- return proc_control(ps, p);
+ return proc_control(ps, p);
}
static int proc_bulk_compat(struct dev_state *ps,
struct usbdevfs_bulktransfer32 __user *p32)
{
- struct usbdevfs_bulktransfer __user *p;
- compat_uint_t n;
- compat_caddr_t addr;
+ struct usbdevfs_bulktransfer __user *p;
+ compat_uint_t n;
+ compat_caddr_t addr;
- p = compat_alloc_user_space(sizeof(*p));
+ p = compat_alloc_user_space(sizeof(*p));
- if (get_user(n, &p32->ep) || put_user(n, &p->ep) ||
- get_user(n, &p32->len) || put_user(n, &p->len) ||
- get_user(n, &p32->timeout) || put_user(n, &p->timeout) ||
- get_user(addr, &p32->data) || put_user(compat_ptr(addr), &p->data))
- return -EFAULT;
+ if (get_user(n, &p32->ep) || put_user(n, &p->ep) ||
+ get_user(n, &p32->len) || put_user(n, &p->len) ||
+ get_user(n, &p32->timeout) || put_user(n, &p->timeout) ||
+ get_user(addr, &p32->data) || put_user(compat_ptr(addr), &p->data))
+ return -EFAULT;
- return proc_bulk(ps, p);
+ return proc_bulk(ps, p);
}
static int proc_disconnectsignal_compat(struct dev_state *ps, void __user *arg)
{
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f7841d4..47aade2 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1179,8 +1179,8 @@ static int usb_resume_interface(struct usb_device *udev,
"reset_resume", status);
} else {
intf->needs_binding = 1;
- dev_warn(&intf->dev, "no %s for driver %s?\n",
- "reset_resume", driver->name);
+ dev_dbg(&intf->dev, "no reset_resume for driver %s?\n",
+ driver->name);
}
} else {
status = driver->resume(intf);
@@ -1790,6 +1790,9 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
int ret = -EPERM;
+ if (enable && !udev->usb2_hw_lpm_allowed)
+ return 0;
+
if (hcd->driver->set_usb2_hw_lpm) {
ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
if (!ret)
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 7421888..3bdfbf8 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -8,7 +8,7 @@
* (C) Copyright Deti Fliegl 1999 (new USB architecture)
* (C) Copyright Randy Dunlap 2000
* (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id,
- more docs, etc)
+ * more docs, etc)
* (C) Copyright Yggdrasil Computing, Inc. 2000
* (usb_device_id matching changes by Adam J. Richter)
* (C) Copyright Greg Kroah-Hartman 2002-2003
@@ -27,7 +27,7 @@
static const struct file_operations *usb_minors[MAX_USB_MINORS];
static DECLARE_RWSEM(minor_rwsem);
-static int usb_open(struct inode * inode, struct file * file)
+static int usb_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
const struct file_operations *c;
@@ -44,7 +44,7 @@ static int usb_open(struct inode * inode, struct file * file)
file->f_op = new_fops;
/* Curiouser and curiouser... NULL ->open() as "no device" ? */
if (file->f_op->open)
- err = file->f_op->open(inode,file);
+ err = file->f_op->open(inode, file);
if (err) {
fops_put(file->f_op);
file->f_op = fops_get(old_fops);
@@ -166,7 +166,7 @@ int usb_register_dev(struct usb_interface *intf,
char *temp;
#ifdef CONFIG_USB_DYNAMIC_MINORS
- /*
+ /*
* We don't care what the device tries to start at, we want to start
* at zero to pack the devices into the smallest available space with
* no holes in the minor range.
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index b9d3c43..dfe9d0f 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -215,6 +215,9 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto disable_pci;
}
+ hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+ driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
hcd->rsrc_start = pci_resource_start(dev, 0);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index d6a8d23..6bffb8c 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -6,7 +6,7 @@
* (C) Copyright Deti Fliegl 1999
* (C) Copyright Randy Dunlap 2000
* (C) Copyright David Brownell 2000-2002
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -40,6 +40,7 @@
#include <linux/platform_device.h>
#include <linux/workqueue.h>
#include <linux/pm_runtime.h>
+#include <linux/types.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -92,10 +93,7 @@ EXPORT_SYMBOL_GPL (usb_bus_list);
/* used when allocating bus numbers */
#define USB_MAXBUS 64
-struct usb_busmap {
- unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))];
-};
-static struct usb_busmap busmap;
+static DECLARE_BITMAP(busmap, USB_MAXBUS);
/* used when updating list of hcds */
DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
@@ -171,7 +169,7 @@ static const u8 usb25_rh_dev_descriptor[18] = {
};
/* usb 2.0 root hub device descriptor */
-static const u8 usb2_rh_dev_descriptor [18] = {
+static const u8 usb2_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
0x01, /* __u8 bDescriptorType; Device */
0x00, 0x02, /* __le16 bcdUSB; v2.0 */
@@ -194,7 +192,7 @@ static const u8 usb2_rh_dev_descriptor [18] = {
/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
/* usb 1.1 root hub device descriptor */
-static const u8 usb11_rh_dev_descriptor [18] = {
+static const u8 usb11_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
0x01, /* __u8 bDescriptorType; Device */
0x10, 0x01, /* __le16 bcdUSB; v1.1 */
@@ -219,7 +217,7 @@ static const u8 usb11_rh_dev_descriptor [18] = {
/* Configuration descriptors for our root hubs */
-static const u8 fs_rh_config_descriptor [] = {
+static const u8 fs_rh_config_descriptor[] = {
/* one configuration */
0x09, /* __u8 bLength; */
@@ -228,13 +226,13 @@ static const u8 fs_rh_config_descriptor [] = {
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
- 0xc0, /* __u8 bmAttributes;
+ 0xc0, /* __u8 bmAttributes;
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
-
+
/* USB 1.1:
* USB 2.0, single TT organization (mandatory):
* one interface, protocol 0
@@ -256,17 +254,17 @@ static const u8 fs_rh_config_descriptor [] = {
0x00, /* __u8 if_bInterfaceSubClass; */
0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
0x00, /* __u8 if_iInterface; */
-
+
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
0x05, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
};
-static const u8 hs_rh_config_descriptor [] = {
+static const u8 hs_rh_config_descriptor[] = {
/* one configuration */
0x09, /* __u8 bLength; */
@@ -275,13 +273,13 @@ static const u8 hs_rh_config_descriptor [] = {
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
- 0xc0, /* __u8 bmAttributes;
+ 0xc0, /* __u8 bmAttributes;
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
-
+
/* USB 1.1:
* USB 2.0, single TT organization (mandatory):
* one interface, protocol 0
@@ -303,12 +301,12 @@ static const u8 hs_rh_config_descriptor [] = {
0x00, /* __u8 if_bInterfaceSubClass; */
0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
0x00, /* __u8 if_iInterface; */
-
+
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
0x05, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
/* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
* see hub.c:hub_configure() for details. */
(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
@@ -428,7 +426,7 @@ rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
char const *s;
static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
- // language ids
+ /* language ids */
switch (id) {
case 0:
/* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
@@ -464,7 +462,7 @@ rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
{
struct usb_ctrlrequest *cmd;
- u16 typeReq, wValue, wIndex, wLength;
+ u16 typeReq, wValue, wIndex, wLength;
u8 *ubuf = urb->transfer_buffer;
unsigned len = 0;
int status;
@@ -526,10 +524,10 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
*/
case DeviceRequest | USB_REQ_GET_STATUS:
- tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+ tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
<< USB_DEVICE_REMOTE_WAKEUP)
| (1 << USB_DEVICE_SELF_POWERED);
- tbuf [1] = 0;
+ tbuf[1] = 0;
len = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
@@ -546,7 +544,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
goto error;
break;
case DeviceRequest | USB_REQ_GET_CONFIGURATION:
- tbuf [0] = 1;
+ tbuf[0] = 1;
len = 1;
/* FALLTHROUGH */
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
@@ -609,13 +607,13 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
}
break;
case DeviceRequest | USB_REQ_GET_INTERFACE:
- tbuf [0] = 0;
+ tbuf[0] = 0;
len = 1;
/* FALLTHROUGH */
case DeviceOutRequest | USB_REQ_SET_INTERFACE:
break;
case DeviceOutRequest | USB_REQ_SET_ADDRESS:
- // wValue == urb->dev->devaddr
+ /* wValue == urb->dev->devaddr */
dev_dbg (hcd->self.controller, "root hub device address %d\n",
wValue);
break;
@@ -625,9 +623,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
/* ENDPOINT REQUESTS */
case EndpointRequest | USB_REQ_GET_STATUS:
- // ENDPOINT_HALT flag
- tbuf [0] = 0;
- tbuf [1] = 0;
+ /* ENDPOINT_HALT flag */
+ tbuf[0] = 0;
+ tbuf[1] = 0;
len = 2;
/* FALLTHROUGH */
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
@@ -683,7 +681,7 @@ error:
if (urb->transfer_buffer_length < len)
len = urb->transfer_buffer_length;
urb->actual_length = len;
- // always USB_DIR_IN, toward host
+ /* always USB_DIR_IN, toward host */
memcpy (ubuf, bufp, len);
/* report whether RH hardware supports remote wakeup */
@@ -877,11 +875,11 @@ static ssize_t authorized_default_store(struct device *dev,
usb_hcd = bus_to_hcd(usb_bus);
result = sscanf(buf, "%u\n", &val);
if (result == 1) {
- usb_hcd->authorized_default = val? 1 : 0;
+ usb_hcd->authorized_default = val ? 1 : 0;
result = size;
- }
- else
+ } else {
result = -EINVAL;
+ }
return result;
}
static DEVICE_ATTR_RW(authorized_default);
@@ -941,12 +939,12 @@ static int usb_register_bus(struct usb_bus *bus)
int busnum;
mutex_lock(&usb_bus_list_lock);
- busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
+ busnum = find_next_zero_bit(busmap, USB_MAXBUS, 1);
if (busnum >= USB_MAXBUS) {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
goto error_find_busnum;
}
- set_bit (busnum, busmap.busmap);
+ set_bit(busnum, busmap);
bus->busnum = busnum;
/* Add it to the local list of buses */
@@ -987,7 +985,7 @@ static void usb_deregister_bus (struct usb_bus *bus)
usb_notify_remove_bus(bus);
- clear_bit (bus->busnum, busmap.busmap);
+ clear_bit(bus->busnum, busmap);
}
/**
@@ -1033,6 +1031,7 @@ static int register_root_hub(struct usb_hcd *hcd)
dev_name(&usb_dev->dev), retval);
return retval;
}
+ usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
}
retval = usb_new_device (usb_dev);
@@ -1120,21 +1119,21 @@ long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
case USB_SPEED_LOW: /* INTR only */
if (is_input) {
tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
+ return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
} else {
tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
+ return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
}
case USB_SPEED_FULL: /* ISOC or INTR */
if (isoc) {
tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp);
+ return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
} else {
tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
- return (9107L + BW_HOST_DELAY + tmp);
+ return 9107L + BW_HOST_DELAY + tmp;
}
case USB_SPEED_HIGH: /* ISOC or INTR */
- // FIXME adjust for input vs output
+ /* FIXME adjust for input vs output */
if (isoc)
tmp = HS_NSECS_ISO (bytecount);
else
@@ -1651,6 +1650,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status)
static void __usb_hcd_giveback_urb(struct urb *urb)
{
struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
+ struct usb_anchor *anchor = urb->anchor;
int status = urb->unlinked;
unsigned long flags;
@@ -1662,6 +1662,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
unmap_urb_for_dma(hcd, urb);
usbmon_urb_complete(&hcd->self, urb, status);
+ usb_anchor_suspend_wakeups(anchor);
usb_unanchor_urb(urb);
/* pass ownership to the completion handler */
@@ -1681,6 +1682,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
urb->complete(urb);
local_irq_restore(flags);
+ usb_anchor_resume_wakeups(anchor);
atomic_dec(&urb->use_count);
if (unlikely(atomic_read(&urb->reject)))
wake_up(&usb_kill_urb_queue);
@@ -1703,7 +1705,9 @@ static void usb_giveback_urb_bh(unsigned long param)
urb = list_entry(local_list.next, struct urb, urb_list);
list_del_init(&urb->urb_list);
+ bh->completing_ep = urb->ep;
__usb_hcd_giveback_urb(urb);
+ bh->completing_ep = NULL;
}
/* check if there are new URBs to giveback */
@@ -1812,7 +1816,7 @@ rescan:
case USB_ENDPOINT_XFER_INT:
s = "-intr"; break;
default:
- s = "-iso"; break;
+ s = "-iso"; break;
};
s;
}));
@@ -2073,8 +2077,11 @@ EXPORT_SYMBOL_GPL(usb_alloc_streams);
*
* Reverts a group of bulk endpoints back to not using stream IDs.
* Can fail if we are given bad arguments, or HCD is broken.
+ *
+ * Return: On success, the number of allocated streams. On failure, a negative
+ * error code.
*/
-void usb_free_streams(struct usb_interface *interface,
+int usb_free_streams(struct usb_interface *interface,
struct usb_host_endpoint **eps, unsigned int num_eps,
gfp_t mem_flags)
{
@@ -2085,14 +2092,14 @@ void usb_free_streams(struct usb_interface *interface,
dev = interface_to_usbdev(interface);
hcd = bus_to_hcd(dev->bus);
if (dev->speed != USB_SPEED_SUPER)
- return;
+ return -EINVAL;
/* Streams only apply to bulk endpoints. */
for (i = 0; i < num_eps; i++)
if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
- return;
+ return -EINVAL;
- hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
+ return hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
}
EXPORT_SYMBOL_GPL(usb_free_streams);
@@ -2245,7 +2252,7 @@ static void hcd_resume_work(struct work_struct *work)
}
/**
- * usb_hcd_resume_root_hub - called by HCD to resume its root hub
+ * usb_hcd_resume_root_hub - called by HCD to resume its root hub
* @hcd: host controller for this root hub
*
* The USB host controller calls this function when its root hub is
@@ -2324,15 +2331,8 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
- unsigned long flags;
irqreturn_t rc;
- /* IRQF_DISABLED doesn't work correctly with shared IRQs
- * when the first handler doesn't use it. So let's just
- * assume it's never used.
- */
- local_irq_save(flags);
-
if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
rc = IRQ_NONE;
else if (hcd->driver->irq(hcd) == IRQ_NONE)
@@ -2340,7 +2340,6 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
else
rc = IRQ_HANDLED;
- local_irq_restore(flags);
return rc;
}
EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2547,13 +2546,6 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
if (hcd->driver->irq) {
- /* IRQF_DISABLED doesn't work as advertised when used together
- * with IRQF_SHARED. As usb_hcd_irq() will always disable
- * interrupts we can remove it here.
- */
- if (irqflags & IRQF_SHARED)
- irqflags &= ~IRQF_DISABLED;
-
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
@@ -2600,7 +2592,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
/* Keep old behaviour if authorized_default is not in [0, 1]. */
if (authorized_default < 0 || authorized_default > 1)
- hcd->authorized_default = hcd->wireless? 0 : 1;
+ hcd->authorized_default = hcd->wireless ? 0 : 1;
else
hcd->authorized_default = authorized_default;
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -2743,7 +2735,7 @@ err_allocate_root_hub:
err_register_bus:
hcd_buffer_destroy(hcd);
return retval;
-}
+}
EXPORT_SYMBOL_GPL(usb_add_hcd);
/**
@@ -2818,7 +2810,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
EXPORT_SYMBOL_GPL(usb_remove_hcd);
void
-usb_hcd_platform_shutdown(struct platform_device* dev)
+usb_hcd_platform_shutdown(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -2840,7 +2832,7 @@ struct usb_mon_operations *mon_ops;
* Notice that the code is minimally error-proof. Because usbmon needs
* symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
*/
-
+
int usb_mon_register (struct usb_mon_operations *ops)
{
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index dde4c83..06cec635 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -120,7 +120,7 @@ static inline char *portspeed(struct usb_hub *hub, int portstatus)
if (hub_is_superspeed(hub->hdev))
return "5.0 Gb/s";
if (portstatus & USB_PORT_STAT_HIGH_SPEED)
- return "480 Mb/s";
+ return "480 Mb/s";
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
return "1.5 Mb/s";
else
@@ -135,7 +135,7 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
return usb_get_intfdata(hdev->actconfig->interface[0]);
}
-static int usb_device_supports_lpm(struct usb_device *udev)
+int usb_device_supports_lpm(struct usb_device *udev)
{
/* USB 2.1 (and greater) devices indicate LPM support through
* their USB 2.0 Extended Capabilities BOS descriptor.
@@ -156,6 +156,11 @@ static int usb_device_supports_lpm(struct usb_device *udev)
"Power management will be impacted.\n");
return 0;
}
+
+ /* udev is root hub */
+ if (!udev->parent)
+ return 1;
+
if (udev->parent->lpm_capable)
return 1;
@@ -310,9 +315,9 @@ static void usb_set_lpm_parameters(struct usb_device *udev)
return;
udev_u1_del = udev->bos->ss_cap->bU1devExitLat;
- udev_u2_del = udev->bos->ss_cap->bU2DevExitLat;
+ udev_u2_del = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat);
hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat;
- hub_u2_del = udev->parent->bos->ss_cap->bU2DevExitLat;
+ hub_u2_del = le16_to_cpu(udev->parent->bos->ss_cap->bU2DevExitLat);
usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del,
hub, &udev->parent->u1_params, hub_u1_del);
@@ -433,7 +438,7 @@ static void set_port_led(
case HUB_LED_OFF: s = "off"; break;
case HUB_LED_AUTO: s = "auto"; break;
default: s = "??"; break;
- }; s; }),
+ } s; }),
status);
}
@@ -857,7 +862,7 @@ static int hub_hub_status(struct usb_hub *hub,
"%s failed (err = %d)\n", __func__, ret);
} else {
*status = le16_to_cpu(hub->status->hub.wHubStatus);
- *change = le16_to_cpu(hub->status->hub.wHubChange);
+ *change = le16_to_cpu(hub->status->hub.wHubChange);
ret = 0;
}
mutex_unlock(&hub->status_mutex);
@@ -956,7 +961,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
*/
set_bit(port1, hub->change_bits);
- kick_khubd(hub);
+ kick_khubd(hub);
}
/**
@@ -1107,16 +1112,13 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
/*
* USB3 protocol ports will automatically transition
* to Enabled state when detect an USB3.0 device attach.
- * Do not disable USB3 protocol ports.
+ * Do not disable USB3 protocol ports, just pretend
+ * power was lost
*/
- if (!hub_is_superspeed(hdev)) {
+ portstatus &= ~USB_PORT_STAT_ENABLE;
+ if (!hub_is_superspeed(hdev))
usb_clear_port_feature(hdev, port1,
USB_PORT_FEAT_ENABLE);
- portstatus &= ~USB_PORT_STAT_ENABLE;
- } else {
- /* Pretend that power was lost for USB3 devs */
- portstatus &= ~USB_PORT_STAT_ENABLE;
- }
}
/* Clear status-change flags; we'll debounce later */
@@ -1130,6 +1132,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
}
+ if (portchange & USB_PORT_STAT_C_RESET) {
+ need_debounce_delay = true;
+ usb_clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_RESET);
+ }
if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
hub_is_superspeed(hub->hdev)) {
need_debounce_delay = true;
@@ -1361,7 +1368,7 @@ static int hub_configure(struct usb_hub *hub,
if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
!(hub_is_superspeed(hdev))) {
int i;
- char portstr [USB_MAXCHILDREN + 1];
+ char portstr[USB_MAXCHILDREN + 1];
for (i = 0; i < hdev->maxchild; i++)
portstr[i] = hub->descriptor->u.hs.DeviceRemovable
@@ -1429,32 +1436,32 @@ static int hub_configure(struct usb_hub *hub,
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
switch (wHubCharacteristics & HUB_CHAR_TTTT) {
- case HUB_TTTT_8_BITS:
- if (hdev->descriptor.bDeviceProtocol != 0) {
- hub->tt.think_time = 666;
- dev_dbg(hub_dev, "TT requires at most %d "
- "FS bit times (%d ns)\n",
- 8, hub->tt.think_time);
- }
- break;
- case HUB_TTTT_16_BITS:
- hub->tt.think_time = 666 * 2;
+ case HUB_TTTT_8_BITS:
+ if (hdev->descriptor.bDeviceProtocol != 0) {
+ hub->tt.think_time = 666;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
- 16, hub->tt.think_time);
- break;
- case HUB_TTTT_24_BITS:
- hub->tt.think_time = 666 * 3;
- dev_dbg(hub_dev, "TT requires at most %d "
- "FS bit times (%d ns)\n",
- 24, hub->tt.think_time);
- break;
- case HUB_TTTT_32_BITS:
- hub->tt.think_time = 666 * 4;
- dev_dbg(hub_dev, "TT requires at most %d "
- "FS bit times (%d ns)\n",
- 32, hub->tt.think_time);
- break;
+ 8, hub->tt.think_time);
+ }
+ break;
+ case HUB_TTTT_16_BITS:
+ hub->tt.think_time = 666 * 2;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 16, hub->tt.think_time);
+ break;
+ case HUB_TTTT_24_BITS:
+ hub->tt.think_time = 666 * 3;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 24, hub->tt.think_time);
+ break;
+ case HUB_TTTT_32_BITS:
+ hub->tt.think_time = 666 * 4;
+ dev_dbg(hub_dev, "TT requires at most %d "
+ "FS bit times (%d ns)\n",
+ 32, hub->tt.think_time);
+ break;
}
/* probe() zeroes hub->indicator[] */
@@ -1560,7 +1567,7 @@ static int hub_configure(struct usb_hub *hub,
/* maybe cycle the hub leds */
if (hub->has_indicators && blinkenlights)
- hub->indicator [0] = INDICATOR_CYCLE;
+ hub->indicator[0] = INDICATOR_CYCLE;
for (i = 0; i < hdev->maxchild; i++) {
ret = usb_hub_create_port_device(hub, i + 1);
@@ -1978,7 +1985,7 @@ static void choose_devnum(struct usb_device *udev)
if (devnum >= 128)
devnum = find_next_zero_bit(bus->devmap.devicemap,
128, 1);
- bus->devnum_next = ( devnum >= 127 ? 1 : devnum + 1);
+ bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
}
if (devnum < 128) {
set_bit(devnum, bus->devmap.devicemap);
@@ -2018,8 +2025,8 @@ static void hub_free_dev(struct usb_device *udev)
* Something got disconnected. Get rid of it and all of its children.
*
* If *pdev is a normal device then the parent hub must already be locked.
- * If *pdev is a root hub then this routine will acquire the
- * usb_bus_list_lock on behalf of the caller.
+ * If *pdev is a root hub then the caller must hold the usb_bus_list_lock,
+ * which protects the set of root hubs as well as the list of buses.
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
@@ -2232,8 +2239,7 @@ static int usb_enumerate_device(struct usb_device *udev)
udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- }
- else {
+ } else {
/* read the standard strings and cache them if present */
udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
udev->manufacturer = usb_cache_string(udev,
@@ -2489,7 +2495,7 @@ error_device_descriptor:
usb_autosuspend_device(usb_dev);
error_autoresume:
out_authorized:
- usb_unlock_device(usb_dev); // complements locktree
+ usb_unlock_device(usb_dev); /* complements locktree */
return result;
}
@@ -3108,8 +3114,8 @@ static int finish_port_resume(struct usb_device *udev)
retry_reset_resume:
status = usb_reset_and_verify_device(udev);
- /* 10.5.4.5 says be sure devices in the tree are still there.
- * For now let's assume the device didn't go crazy on resume,
+ /* 10.5.4.5 says be sure devices in the tree are still there.
+ * For now let's assume the device didn't go crazy on resume,
* and device drivers will know about any resume quirks.
*/
if (status == 0) {
@@ -3211,7 +3217,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
if (status == 0 && !port_is_suspended(hub, portstatus))
goto SuspendCleared;
- // dev_dbg(hub->intfdev, "resume port %d\n", port1);
+ /* dev_dbg(hub->intfdev, "resume port %d\n", port1); */
set_bit(port1, hub->busy_bits);
@@ -3426,6 +3432,9 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
unsigned long long u2_pel;
int ret;
+ if (udev->state != USB_STATE_CONFIGURED)
+ return 0;
+
/* Convert SEL and PEL stored in ns to us */
u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
@@ -3852,7 +3861,7 @@ EXPORT_SYMBOL_GPL(usb_enable_ltm);
* Between connect detection and reset signaling there must be a delay
* of 100ms at least for debounce and power-settling. The corresponding
* timer shall restart whenever the downstream port detects a disconnect.
- *
+ *
* Apparently there are some bluetooth and irda-dongles and a number of
* low-speed devices for which this debounce period may last over a second.
* Not covered by the spec - but easy to deal with.
@@ -3946,6 +3955,32 @@ static int hub_set_address(struct usb_device *udev, int devnum)
return retval;
}
+/*
+ * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
+ * when they're plugged into a USB 2.0 port, but they don't work when LPM is
+ * enabled.
+ *
+ * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
+ * device says it supports the new USB 2.0 Link PM errata by setting the BESL
+ * support bit in the BOS descriptor.
+ */
+static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
+{
+ int connect_type;
+
+ if (!udev->usb2_hw_lpm_capable)
+ return;
+
+ connect_type = usb_get_hub_port_connect_type(udev->parent,
+ udev->portnum);
+
+ if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) ||
+ connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+ udev->usb2_hw_lpm_allowed = 1;
+ usb_set_usb2_hardware_lpm(udev, 1);
+ }
+}
+
/* Reset device, (re)assign address, get device descriptor.
* Device connection must be stable, no more debouncing needed.
* Returns device in USB_STATE_ADDRESS, except on error.
@@ -4052,7 +4087,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
udev->tt = &hub->tt;
udev->ttport = port1;
}
-
+
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
* Because device hardware and firmware is sometimes buggy in
* this area, and this is how Linux has done it for ages.
@@ -4127,11 +4162,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
#undef GET_DESCRIPTOR_BUFSIZE
}
- /*
- * If device is WUSB, we already assigned an
- * unauthorized address in the Connect Ack sequence;
- * authorization will assign the final address.
- */
+ /*
+ * If device is WUSB, we already assigned an
+ * unauthorized address in the Connect Ack sequence;
+ * authorization will assign the final address.
+ */
if (udev->wusb == 0) {
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev, devnum);
@@ -4160,7 +4195,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
msleep(10);
if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
break;
- }
+ }
retval = usb_get_device_descriptor(udev, 8);
if (retval < 8) {
@@ -4216,7 +4251,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
usb_ep0_reinit(udev);
}
-
+
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
if (retval < (signed)sizeof(udev->descriptor)) {
if (retval != -ENODEV)
@@ -4239,6 +4274,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
/* notify HCD that we have a device connected and addressed */
if (hcd->driver->update_device)
hcd->driver->update_device(hcd, udev);
+ hub_set_initial_usb2_lpm_policy(udev);
fail:
if (retval) {
hub_port_disable(hub, port1, 0);
@@ -4313,7 +4349,7 @@ hub_power_remaining (struct usb_hub *hub)
}
if (remaining < 0) {
dev_warn(hub->intfdev, "%dmA over power budget!\n",
- - remaining);
+ -remaining);
remaining = 0;
}
return remaining;
@@ -4424,7 +4460,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)
- goto done;
+ goto done;
return;
}
if (hub_is_superspeed(hub->hdev))
@@ -4447,7 +4483,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
}
usb_set_device_state(udev, USB_STATE_POWERED);
- udev->bus_mA = hub->mA_per_port;
+ udev->bus_mA = hub->mA_per_port;
udev->level = hdev->level + 1;
udev->wusb = hub_is_wusb(hub);
@@ -4501,7 +4537,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
goto loop_disable;
}
}
-
+
/* check for devices running slower than they could */
if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
&& udev->speed == USB_SPEED_FULL
@@ -4561,7 +4597,7 @@ loop:
dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
port1);
}
-
+
done:
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent)
@@ -4726,7 +4762,7 @@ static void hub_events(void)
* EM interference sometimes causes badly
* shielded USB devices to be shutdown by
* the hub, this hack enables them again.
- * Works at least with mouse driver.
+ * Works at least with mouse driver.
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
&& !connect_change
@@ -4838,7 +4874,7 @@ static void hub_events(void)
dev_dbg(hub_dev, "over-current change\n");
clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
msleep(500); /* Cool down */
- hub_power_on(hub, true);
+ hub_power_on(hub, true);
hub_hub_status(hub, &status, &unused);
if (status & HUB_STATUS_OVERCURRENT)
dev_err(hub_dev, "over-current "
@@ -4858,7 +4894,7 @@ static void hub_events(void)
usb_unlock_device(hdev);
kref_put(&hub->kref, hub_release);
- } /* end while (1) */
+ } /* end while (1) */
}
static int hub_thread(void *__unused)
@@ -4883,7 +4919,7 @@ static int hub_thread(void *__unused)
static const struct usb_device_id hub_id_table[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
- | USB_DEVICE_ID_MATCH_INT_CLASS,
+ | USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_GENESYS_LOGIC,
.bInterfaceClass = USB_CLASS_HUB,
.driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
@@ -5083,6 +5119,12 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
}
parent_hub = usb_hub_to_struct_hub(parent_hdev);
+ /* Disable USB2 hardware LPM.
+ * It will be re-enabled by the enumeration process.
+ */
+ if (udev->usb2_hw_lpm_enabled == 1)
+ usb_set_usb2_hardware_lpm(udev, 0);
+
bos = udev->bos;
udev->bos = NULL;
@@ -5117,13 +5159,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (ret < 0)
goto re_enumerate;
-
+
/* Device might have changed firmware (DFU or similar) */
if (descriptors_changed(udev, &descriptor, bos)) {
dev_info(&udev->dev, "device firmware changed\n");
udev->descriptor = descriptor; /* for disconnect() calls */
goto re_enumerate;
- }
+ }
/* Restore the device's previous configuration */
if (!udev->actconfig)
@@ -5148,7 +5190,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
udev->actconfig->desc.bConfigurationValue, ret);
mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
- }
+ }
mutex_unlock(hcd->bandwidth_mutex);
usb_set_device_state(udev, USB_STATE_CONFIGURED);
@@ -5190,12 +5232,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
done:
/* Now that the alt settings are re-installed, enable LTM and LPM. */
+ usb_set_usb2_hardware_lpm(udev, 1);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
usb_release_bos_descriptor(udev);
udev->bos = bos;
return 0;
-
+
re_enumerate:
/* LPM state doesn't matter when we're about to destroy the device. */
hub_port_logical_disconnect(parent_hub, port1);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 82927e1..bb31597 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1182,8 +1182,12 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
put_device(&dev->actconfig->interface[i]->dev);
dev->actconfig->interface[i] = NULL;
}
+
+ if (dev->usb2_hw_lpm_enabled == 1)
+ usb_set_usb2_hardware_lpm(dev, 0);
usb_unlocked_disable_lpm(dev);
usb_disable_ltm(dev);
+
dev->actconfig = NULL;
if (dev->state == USB_STATE_CONFIGURED)
usb_set_device_state(dev, USB_STATE_ADDRESS);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 5b44cd4..12924db 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -13,6 +13,7 @@
#include <linux/usb.h>
#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
#include "usb.h"
/* Lists of quirky USB devices, split in device quirks and interface quirks.
@@ -97,6 +98,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Alcor Micro Corp. Hub */
{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* MicroTouch Systems touchscreen */
+ { USB_DEVICE(0x0596, 0x051e), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -130,6 +134,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Broadcom BCM92035DGROM BT dongle */
{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* MAYA44USB sound device */
+ { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
@@ -155,6 +162,21 @@ static const struct usb_device_id usb_interface_quirk_list[] = {
{ } /* terminating entry must be last */
};
+static const struct usb_device_id usb_amd_resume_quirk_list[] = {
+ /* Lenovo Mouse with Pixart controller */
+ { USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Pixart Mouse */
+ { USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Optical Mouse M90/M100 */
+ { USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ { } /* terminating entry must be last */
+};
+
static bool usb_match_any_interface(struct usb_device *udev,
const struct usb_device_id *id)
{
@@ -181,6 +203,18 @@ static bool usb_match_any_interface(struct usb_device *udev,
return false;
}
+static int usb_amd_resume_quirk(struct usb_device *udev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = bus_to_hcd(udev->bus);
+ /* The device should be attached directly to root hub */
+ if (udev->level == 1 && hcd->amd_resume_bug == 1)
+ return 1;
+
+ return 0;
+}
+
static u32 __usb_detect_quirks(struct usb_device *udev,
const struct usb_device_id *id)
{
@@ -206,6 +240,15 @@ static u32 __usb_detect_quirks(struct usb_device *udev,
void usb_detect_quirks(struct usb_device *udev)
{
udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
+
+ /*
+ * Pixart-based mice would trigger remote wakeup issue on AMD
+ * Yangtze chipset, so set them as RESET_RESUME flag.
+ */
+ if (usb_amd_resume_quirk(udev))
+ udev->quirks |= __usb_detect_quirks(udev,
+ usb_amd_resume_quirk_list);
+
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 6d2c8ed..52a97ad 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -23,14 +23,16 @@ static ssize_t field##_show(struct device *dev, \
{ \
struct usb_device *udev; \
struct usb_host_config *actconfig; \
+ ssize_t rc = 0; \
\
udev = to_usb_device(dev); \
+ usb_lock_device(udev); \
actconfig = udev->actconfig; \
if (actconfig) \
- return sprintf(buf, format_string, \
+ rc = sprintf(buf, format_string, \
actconfig->desc.field); \
- else \
- return 0; \
+ usb_unlock_device(udev); \
+ return rc; \
} \
#define usb_actconfig_attr(field, format_string) \
@@ -45,12 +47,15 @@ static ssize_t bMaxPower_show(struct device *dev,
{
struct usb_device *udev;
struct usb_host_config *actconfig;
+ ssize_t rc = 0;
udev = to_usb_device(dev);
+ usb_lock_device(udev);
actconfig = udev->actconfig;
- if (!actconfig)
- return 0;
- return sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig));
+ if (actconfig)
+ rc = sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig));
+ usb_unlock_device(udev);
+ return rc;
}
static DEVICE_ATTR_RO(bMaxPower);
@@ -59,12 +64,15 @@ static ssize_t configuration_show(struct device *dev,
{
struct usb_device *udev;
struct usb_host_config *actconfig;
+ ssize_t rc = 0;
udev = to_usb_device(dev);
+ usb_lock_device(udev);
actconfig = udev->actconfig;
- if ((!actconfig) || (!actconfig->string))
- return 0;
- return sprintf(buf, "%s\n", actconfig->string);
+ if (actconfig && actconfig->string)
+ rc = sprintf(buf, "%s\n", actconfig->string);
+ usb_unlock_device(udev);
+ return rc;
}
static DEVICE_ATTR_RO(configuration);
@@ -390,7 +398,8 @@ static DEVICE_ATTR_RW(autosuspend);
static const char on_string[] = "on";
static const char auto_string[] = "auto";
-static void warn_level(void) {
+static void warn_level(void)
+{
static int level_warned;
if (!level_warned) {
@@ -449,7 +458,7 @@ static ssize_t usb2_hardware_lpm_show(struct device *dev,
struct usb_device *udev = to_usb_device(dev);
const char *p;
- if (udev->usb2_hw_lpm_enabled == 1)
+ if (udev->usb2_hw_lpm_allowed == 1)
p = "enabled";
else
p = "disabled";
@@ -469,8 +478,10 @@ static ssize_t usb2_hardware_lpm_store(struct device *dev,
ret = strtobool(buf, &value);
- if (!ret)
+ if (!ret) {
+ udev->usb2_hw_lpm_allowed = value;
ret = usb_set_usb2_hardware_lpm(udev, value);
+ }
usb_unlock_device(udev);
@@ -644,7 +655,7 @@ static ssize_t authorized_store(struct device *dev,
result = usb_deauthorize_device(usb_dev);
else
result = usb_authorize_device(usb_dev);
- return result < 0? result : size;
+ return result < 0 ? result : size;
}
static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR,
authorized_show, authorized_store);
@@ -764,6 +775,7 @@ read_descriptors(struct file *filp, struct kobject *kobj,
* Following that are the raw descriptor entries for all the
* configurations (config plus subsidiary descriptors).
*/
+ usb_lock_device(udev);
for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
nleft > 0; ++cfgno) {
if (cfgno < 0) {
@@ -784,6 +796,7 @@ read_descriptors(struct file *filp, struct kobject *kobj,
off -= srclen;
}
}
+ usb_unlock_device(udev);
return count - nleft;
}
@@ -870,9 +883,7 @@ static ssize_t interface_show(struct device *dev, struct device_attribute *attr,
char *string;
intf = to_usb_interface(dev);
- string = intf->cur_altsetting->string;
- barrier(); /* The altsetting might change! */
-
+ string = ACCESS_ONCE(intf->cur_altsetting->string);
if (!string)
return 0;
return sprintf(buf, "%s\n", string);
@@ -888,7 +899,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
- alt = intf->cur_altsetting;
+ alt = ACCESS_ONCE(intf->cur_altsetting);
return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
"ic%02Xisc%02Xip%02Xin%02X\n",
@@ -909,23 +920,14 @@ static ssize_t supports_autosuspend_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- struct usb_interface *intf;
- struct usb_device *udev;
- int ret;
+ int s;
- intf = to_usb_interface(dev);
- udev = interface_to_usbdev(intf);
-
- usb_lock_device(udev);
+ device_lock(dev);
/* Devices will be autosuspended even when an interface isn't claimed */
- if (!intf->dev.driver ||
- to_usb_driver(intf->dev.driver)->supports_autosuspend)
- ret = sprintf(buf, "%u\n", 1);
- else
- ret = sprintf(buf, "%u\n", 0);
- usb_unlock_device(udev);
+ s = (!dev->driver || to_usb_driver(dev->driver)->supports_autosuspend);
+ device_unlock(dev);
- return ret;
+ return sprintf(buf, "%u\n", s);
}
static DEVICE_ATTR_RO(supports_autosuspend);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c12bc79..e622083 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -138,13 +138,19 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
}
EXPORT_SYMBOL_GPL(usb_anchor_urb);
+static int usb_anchor_check_wakeup(struct usb_anchor *anchor)
+{
+ return atomic_read(&anchor->suspend_wakeups) == 0 &&
+ list_empty(&anchor->urb_list);
+}
+
/* Callers must hold anchor->lock */
static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
{
urb->anchor = NULL;
list_del(&urb->anchor_list);
usb_put_urb(urb);
- if (list_empty(&anchor->urb_list))
+ if (usb_anchor_check_wakeup(anchor))
wake_up(&anchor->wait);
}
@@ -846,6 +852,39 @@ void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
/**
+ * usb_anchor_suspend_wakeups
+ * @anchor: the anchor you want to suspend wakeups on
+ *
+ * Call this to stop the last urb being unanchored from waking up any
+ * usb_wait_anchor_empty_timeout waiters. This is used in the hcd urb give-
+ * back path to delay waking up until after the completion handler has run.
+ */
+void usb_anchor_suspend_wakeups(struct usb_anchor *anchor)
+{
+ if (anchor)
+ atomic_inc(&anchor->suspend_wakeups);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_suspend_wakeups);
+
+/**
+ * usb_anchor_resume_wakeups
+ * @anchor: the anchor you want to resume wakeups on
+ *
+ * Allow usb_wait_anchor_empty_timeout waiters to be woken up again, and
+ * wake up any current waiters if the anchor is empty.
+ */
+void usb_anchor_resume_wakeups(struct usb_anchor *anchor)
+{
+ if (!anchor)
+ return;
+
+ atomic_dec(&anchor->suspend_wakeups);
+ if (usb_anchor_check_wakeup(anchor))
+ wake_up(&anchor->wait);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_resume_wakeups);
+
+/**
* usb_wait_anchor_empty_timeout - wait for an anchor to be unused
* @anchor: the anchor you want to become unused
* @timeout: how long you are willing to wait in milliseconds
@@ -858,7 +897,8 @@ EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
unsigned int timeout)
{
- return wait_event_timeout(anchor->wait, list_empty(&anchor->urb_list),
+ return wait_event_timeout(anchor->wait,
+ usb_anchor_check_wakeup(anchor),
msecs_to_jiffies(timeout));
}
EXPORT_SYMBOL_GPL(usb_wait_anchor_empty_timeout);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0a6ee2e..4d11449 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -497,7 +497,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->authorized = 1;
else {
dev->authorized = usb_hcd->authorized_default;
- dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
+ dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
}
return dev;
}
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 8238577..c493836 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -35,6 +35,7 @@ extern int usb_get_device_descriptor(struct usb_device *dev,
unsigned int size);
extern int usb_get_bos_descriptor(struct usb_device *dev);
extern void usb_release_bos_descriptor(struct usb_device *dev);
+extern int usb_device_supports_lpm(struct usb_device *udev);
extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern int usb_choose_configuration(struct usb_device *udev);
generated by cgit v0.10.2 at 2024-07-01 10:08:10 (GMT)