diff options
Diffstat (limited to 'drivers/usb/dwc2/core_intr.c')
-rw-r--r-- | drivers/usb/dwc2/core_intr.c | 492 |
1 files changed, 492 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c new file mode 100644 index 0000000..8205799 --- /dev/null +++ b/drivers/usb/dwc2/core_intr.c @@ -0,0 +1,492 @@ +/* + * core_intr.c - DesignWare HS OTG Controller common interrupt handling + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the common interrupt handlers + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) +{ + switch (hsotg->op_state) { + case OTG_STATE_A_HOST: + return "a_host"; + case OTG_STATE_A_SUSPEND: + return "a_suspend"; + case OTG_STATE_A_PERIPHERAL: + return "a_peripheral"; + case OTG_STATE_B_PERIPHERAL: + return "b_peripheral"; + case OTG_STATE_B_HOST: + return "b_host"; + default: + return "unknown"; + } +} + +/** + * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) +{ + dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* Clear interrupt */ + writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); +} + +/** + * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has occurred. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) +{ + u32 gotgint; + u32 gotgctl; + u32 gintmsk; + + gotgint = readl(hsotg->regs + GOTGINT); + gotgctl = readl(hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, + dwc2_op_state_str(hsotg)); + + if (gotgint & GOTGINT_SES_END_DET) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session End Detected++ (%s)\n", + dwc2_op_state_str(hsotg)); + gotgctl = readl(hsotg->regs + GOTGCTL); + + if (hsotg->op_state == OTG_STATE_B_HOST) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } else { + /* + * If not B_HOST and Device HNP still set, HNP did + * not succeed! + */ + if (gotgctl & GOTGCTL_DEVHNPEN) { + dev_dbg(hsotg->dev, "Session End Detected\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding!\n"); + } + + /* + * If Session End Detected the B-Cable has been + * disconnected + */ + /* Reset to a clean state */ + hsotg->lx_state = DWC2_L0; + } + + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_DEVHNPEN; + writel(gotgctl, hsotg->regs + GOTGCTL); + } + + if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session Request Success Status Change++\n"); + gotgctl = readl(hsotg->regs + GOTGCTL); + if (gotgctl & GOTGCTL_SESREQSCS) { + if (hsotg->core_params->phy_type == + DWC2_PHY_TYPE_PARAM_FS + && hsotg->core_params->i2c_enable > 0) { + hsotg->srp_success = 1; + } else { + /* Clear Session Request */ + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_SESREQ; + writel(gotgctl, hsotg->regs + GOTGCTL); + } + } + } + + if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { + /* + * Print statements during the HNP interrupt handling + * can cause it to fail + */ + gotgctl = readl(hsotg->regs + GOTGCTL); + /* + * WA for 3.00a- HW is not setting cur_mode, even sometimes + * this does not help + */ + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) + udelay(100); + if (gotgctl & GOTGCTL_HSTNEGSCS) { + if (dwc2_is_host_mode(hsotg)) { + hsotg->op_state = OTG_STATE_B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the interrupt + * if host mode is already set. The HCD + * interrupt handler won't get called if the + * HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + + /* + * Call callback function with spin lock + * released + */ + spin_unlock(&hsotg->lock); + + /* Initialize the Core for Host mode */ + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_B_HOST; + } + } else { + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); + writel(gotgctl, hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "HNP Failed\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding\n"); + } + } + + if (gotgint & GOTGINT_HST_NEG_DET) { + /* + * The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode switch all + * interrupts are cleared so the disconnect interrupt + * handler will not get executed. + */ + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", + (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", + hsotg->op_state); + spin_unlock(&hsotg->lock); + dwc2_hcd_disconnect(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_PERIPHERAL; + } else { + /* Need to disable SOF interrupt immediately */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + if (gotgint & GOTGINT_A_DEV_TOUT_CHG) + dev_dbg(hsotg->dev, + " ++OTG Interrupt: A-Device Timeout Change++\n"); + if (gotgint & GOTGINT_DBNCE_DONE) + dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); + + /* Clear GOTGINT */ + writel(gotgint, hsotg->regs + GOTGINT); +} + +/** + * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status + * Change Interrupt + * + * @hsotg: Programming view of DWC_otg controller + * + * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a + * Device to Host Mode transition or a Host to Device Mode transition. This only + * occurs when the cable is connected/removed from the PHY connector. + */ +static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintmsk = readl(hsotg->regs + GINTMSK); + + /* Need to disable SOF interrupt immediately */ + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + + dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* + * Need to schedule a work, as there are possible DELAY function calls. + * Release lock before scheduling workq as it holds spinlock during + * scheduling. + */ + spin_unlock(&hsotg->lock); + queue_work(hsotg->wq_otg, &hsotg->wf_otg); + spin_lock(&hsotg->lock); + + /* Clear interrupt */ + writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); +} + +/** + * dwc2_handle_session_req_intr() - This interrupt indicates that a device is + * initiating the Session Request Protocol to request the host to turn on bus + * power so a new session can begin + * + * @hsotg: Programming view of DWC_otg controller + * + * This handler responds by turning on bus power. If the DWC_otg controller is + * in low power mode, this handler brings the controller out of low power mode + * before turning on bus power. + */ +static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Session Request Interrupt++\n"); + + /* Clear interrupt */ + writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume signaling. + * The handler schedules a time to stop resume signaling. + */ +static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); + dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); + + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS)); + if (hsotg->lx_state == DWC2_L2) { + u32 dctl = readl(hsotg->regs + DCTL); + + /* Clear Remote Wakeup Signaling */ + dctl &= ~DCTL_RMTWKUPSIG; + writel(dctl, hsotg->regs + DCTL); + } + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } else { + if (hsotg->lx_state != DWC2_L1) { + u32 pcgcctl = readl(hsotg->regs + PCGCTL); + + /* Restart the Phy Clock */ + pcgcctl &= ~PCGCTL_STOPPCLK; + writel(pcgcctl, hsotg->regs + PCGCTL); + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } + } + + /* Clear interrupt */ + writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that a device has been disconnected from the + * root port + */ +static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device", + dwc2_op_state_str(hsotg)); + + /* Change to L3 (OFF) state */ + hsotg->lx_state = DWC2_L3; + + writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that SUSPEND state has been detected on the USB. + * + * For HNP the USB Suspend interrupt signals the change from "a_peripheral" + * to "a_host". + * + * When power management is enabled the core will be put in low power mode. + */ +static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) +{ + u32 dsts; + + dev_dbg(hsotg->dev, "USB SUSPEND\n"); + + if (dwc2_is_device_mode(hsotg)) { + /* + * Check the Device status register to determine if the Suspend + * state is active + */ + dsts = readl(hsotg->regs + DSTS); + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts); + dev_dbg(hsotg->dev, + "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n", + !!(dsts & DSTS_SUSPSTS), + hsotg->hw_params.power_optimized); + } else { + if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { + dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); + + /* Clear the a_peripheral flag, back to a_host */ + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + /* Change to L2 (suspend) state */ + hsotg->lx_state = DWC2_L2; + + /* Clear interrupt */ + writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); +} + +#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ + GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ + GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ + GINTSTS_USBSUSP | GINTSTS_PRTINT) + +/* + * This function returns the Core Interrupt register + */ +static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintsts; + u32 gintmsk; + u32 gahbcfg; + u32 gintmsk_common = GINTMSK_COMMON; + + gintsts = readl(hsotg->regs + GINTSTS); + gintmsk = readl(hsotg->regs + GINTMSK); + gahbcfg = readl(hsotg->regs + GAHBCFG); + + /* If any common interrupts set */ + if (gintsts & gintmsk_common) + dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", + gintsts, gintmsk); + + if (gahbcfg & GAHBCFG_GLBL_INTR_EN) + return gintsts & gintmsk & gintmsk_common; + else + return 0; +} + +/* + * Common interrupt handler + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Disconnect Interrupt + * - Session Request Interrupt + * - Resume / Remote Wakeup Detected Interrupt + * - Suspend Interrupt + */ +irqreturn_t dwc2_handle_common_intr(int irq, void *dev) +{ + struct dwc2_hsotg *hsotg = dev; + u32 gintsts; + irqreturn_t retval = IRQ_NONE; + + if (!dwc2_is_controller_alive(hsotg)) { + dev_warn(hsotg->dev, "Controller is dead\n"); + goto out; + } + + spin_lock(&hsotg->lock); + + gintsts = dwc2_read_common_intr(hsotg); + if (gintsts & ~GINTSTS_PRTINT) + retval = IRQ_HANDLED; + + if (gintsts & GINTSTS_MODEMIS) + dwc2_handle_mode_mismatch_intr(hsotg); + if (gintsts & GINTSTS_OTGINT) + dwc2_handle_otg_intr(hsotg); + if (gintsts & GINTSTS_CONIDSTSCHNG) + dwc2_handle_conn_id_status_change_intr(hsotg); + if (gintsts & GINTSTS_DISCONNINT) + dwc2_handle_disconnect_intr(hsotg); + if (gintsts & GINTSTS_SESSREQINT) + dwc2_handle_session_req_intr(hsotg); + if (gintsts & GINTSTS_WKUPINT) + dwc2_handle_wakeup_detected_intr(hsotg); + if (gintsts & GINTSTS_USBSUSP) + dwc2_handle_usb_suspend_intr(hsotg); + + if (gintsts & GINTSTS_PRTINT) { + /* + * The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable + */ + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, + " --Port interrupt received in Device mode--\n"); + gintsts = GINTSTS_PRTINT; + writel(gintsts, hsotg->regs + GINTSTS); + retval = 1; + } + } + + spin_unlock(&hsotg->lock); +out: + return retval; +} +EXPORT_SYMBOL_GPL(dwc2_handle_common_intr); |