summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-hcd.c')
-rw-r--r--drivers/usb/host/xhci-hcd.c290
1 files changed, 199 insertions, 91 deletions
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index dba3e07..816c39c 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -103,7 +103,10 @@ int xhci_reset(struct xhci_hcd *xhci)
u32 state;
state = xhci_readl(xhci, &xhci->op_regs->status);
- BUG_ON((state & STS_HALT) == 0);
+ if ((state & STS_HALT) == 0) {
+ xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+ return 0;
+ }
xhci_dbg(xhci, "// Reset the HC\n");
command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -226,6 +229,7 @@ int xhci_init(struct usb_hcd *hcd)
static void xhci_work(struct xhci_hcd *xhci)
{
u32 temp;
+ u64 temp_64;
/*
* Clear the op reg interrupt status first,
@@ -248,9 +252,9 @@ static void xhci_work(struct xhci_hcd *xhci)
/* FIXME this should be a delayed service routine that clears the EHB */
xhci_handle_event(xhci);
- /* Clear the event handler busy flag; the event ring should be empty. */
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+ /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
/* Flush posted writes -- FIXME is this necessary? */
xhci_readl(xhci, &xhci->ir_set->irq_pending);
}
@@ -266,19 +270,34 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 temp, temp2;
+ union xhci_trb *trb;
spin_lock(&xhci->lock);
+ trb = xhci->event_ring->dequeue;
/* Check if the xHC generated the interrupt, or the irq is shared */
temp = xhci_readl(xhci, &xhci->op_regs->status);
temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (temp == 0xffffffff && temp2 == 0xffffffff)
+ goto hw_died;
+
if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
spin_unlock(&xhci->lock);
return IRQ_NONE;
}
+ xhci_dbg(xhci, "op reg status = %08x\n", temp);
+ xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+ xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+ xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+ (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
if (temp & STS_FATAL) {
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_halt(xhci);
+hw_died:
xhci_to_hcd(xhci)->state = HC_STATE_HALT;
spin_unlock(&xhci->lock);
return -ESHUTDOWN;
@@ -295,6 +314,7 @@ void xhci_event_ring_work(unsigned long arg)
{
unsigned long flags;
int temp;
+ u64 temp_64;
struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
int i, j;
@@ -311,9 +331,9 @@ void xhci_event_ring_work(unsigned long arg)
xhci_dbg(xhci, "Event ring:\n");
xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
xhci_dbg(xhci, "Command ring:\n");
xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
@@ -356,6 +376,7 @@ void xhci_event_ring_work(unsigned long arg)
int xhci_run(struct usb_hcd *hcd)
{
u32 temp;
+ u64 temp_64;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
void (*doorbell)(struct xhci_hcd *) = NULL;
@@ -382,6 +403,20 @@ int xhci_run(struct usb_hcd *hcd)
add_timer(&xhci->event_ring_timer);
#endif
+ xhci_dbg(xhci, "Command ring memory map follows:\n");
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ xhci_dbg(xhci, "ERST memory map follows:\n");
+ xhci_dbg_erst(xhci, &xhci->erst);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
xhci_dbg(xhci, "// Set the interrupt modulation register\n");
temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -406,22 +441,6 @@ int xhci_run(struct usb_hcd *hcd)
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
- xhci_dbg(xhci, "Command ring memory map follows:\n");
- xhci_debug_ring(xhci, xhci->cmd_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
- xhci_dbg_cmd_ptrs(xhci);
-
- xhci_dbg(xhci, "ERST memory map follows:\n");
- xhci_dbg_erst(xhci, &xhci->erst);
- xhci_dbg(xhci, "Event ring:\n");
- xhci_debug_ring(xhci, xhci->event_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
- xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
-
temp = xhci_readl(xhci, &xhci->op_regs->command);
temp |= (CMD_RUN);
xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
@@ -601,10 +620,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
goto exit;
}
if (usb_endpoint_xfer_control(&urb->ep->desc))
- ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+ /* We have a spinlock and interrupts disabled, so we must pass
+ * atomic context to this function, which may allocate memory.
+ */
+ ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
- ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+ ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else
ret = -EINVAL;
@@ -661,8 +683,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
goto done;
xhci_dbg(xhci, "Cancel URB %p\n", urb);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+ xhci_dbg(xhci, "Endpoint ring:\n");
+ xhci_debug_ring(xhci, ep_ring);
td = (struct xhci_td *) urb->hcpriv;
ep_ring->cancels_pending++;
@@ -696,7 +722,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
unsigned int last_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
@@ -724,31 +752,34 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HC already knows the endpoint is disabled,
* or the HCD has noted it is disabled, ignore this request
*/
if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
- in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
__func__, ep);
return 0;
}
- in_ctx->drop_flags |= drop_flag;
- new_drop_flags = in_ctx->drop_flags;
+ ctrl_ctx->drop_flags |= drop_flag;
+ new_drop_flags = ctrl_ctx->drop_flags;
- in_ctx->add_flags = ~drop_flag;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags = ~drop_flag;
+ new_add_flags = ctrl_ctx->add_flags;
- last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+ last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we deleted the last one */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
@@ -778,17 +809,22 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
u32 added_ctxs;
unsigned int last_ctx;
u32 new_add_flags, new_drop_flags, new_slot_info;
int ret = 0;
ret = xhci_check_args(hcd, udev, ep, 1, __func__);
- if (ret <= 0)
+ if (ret <= 0) {
+ /* So we won't queue a reset ep command for a root hub */
+ ep->hcpriv = NULL;
return ret;
+ }
xhci = hcd_to_xhci(hcd);
added_ctxs = xhci_get_endpoint_flag(&ep->desc);
@@ -810,12 +846,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HCD has already noted the endpoint is enabled,
* ignore this request.
*/
- if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
__func__, ep);
return 0;
@@ -833,8 +871,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
return -ENOMEM;
}
- in_ctx->add_flags |= added_ctxs;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags |= added_ctxs;
+ new_add_flags = ctrl_ctx->add_flags;
/* If xhci_endpoint_disable() was called for this endpoint, but the
* xHC hasn't been notified yet through the check_bandwidth() call,
@@ -842,14 +880,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
* descriptors. We must drop and re-add this endpoint, so we leave the
* drop flags alone.
*/
- new_drop_flags = in_ctx->drop_flags;
+ new_drop_flags = ctrl_ctx->drop_flags;
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we just added one past */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
+
+ /* Store the usb_device pointer for later use */
+ ep->hcpriv = udev;
xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
@@ -860,9 +902,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
return 0;
}
-static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
{
+ struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
int i;
/* When a device's add flag and drop flag are zero, any subsequent
@@ -870,17 +914,18 @@ static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
* untouched. Make sure we don't leave any old state in the input
* endpoint contexts.
*/
- virt_dev->in_ctx->drop_flags = 0;
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->drop_flags = 0;
+ ctrl_ctx->add_flags = 0;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
/* Endpoint 0 is always valid */
- virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ slot_ctx->dev_info |= LAST_CTX(1);
for (i = 1; i < 31; ++i) {
- ep_ctx = &virt_dev->in_ctx->ep[i];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
- ep_ctx->deq[0] = 0;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
}
}
@@ -903,6 +948,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
unsigned long flags;
struct xhci_hcd *xhci;
struct xhci_virt_device *virt_dev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
if (ret <= 0)
@@ -918,16 +965,18 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev = xhci->devs[udev->slot_id];
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- virt_dev->in_ctx->add_flags |= SLOT_FLAG;
- virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
- virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
- virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags |= SLOT_FLAG;
+ ctrl_ctx->add_flags &= ~EP0_FLAG;
+ ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+ ctrl_ctx->drop_flags &= ~EP0_FLAG;
xhci_dbg(xhci, "New Input Control Context:\n");
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+ ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
udev->slot_id);
if (ret < 0) {
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -982,10 +1031,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
}
xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
/* Free any old rings */
for (i = 1; i < 31; ++i) {
if (virt_dev->new_ep_rings[i]) {
@@ -1023,7 +1072,67 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev->new_ep_rings[i] = NULL;
}
}
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+/* Deal with stalled endpoints. The core should have sent the control message
+ * to clear the halt condition. However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct usb_device *udev;
+ unsigned int ep_index;
+ unsigned long flags;
+ int ret;
+ struct xhci_dequeue_state deq_state;
+ struct xhci_ring *ep_ring;
+
+ xhci = hcd_to_xhci(hcd);
+ udev = (struct usb_device *) ep->hcpriv;
+ /* Called with a root hub endpoint (or an endpoint that wasn't added
+ * with xhci_add_endpoint()
+ */
+ if (!ep->hcpriv)
+ return;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
+ if (!ep_ring->stopped_td) {
+ xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+ ep->desc.bEndpointAddress);
+ return;
+ }
+
+ xhci_dbg(xhci, "Queueing reset endpoint command\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+ /*
+ * Can't change the ring dequeue pointer until it's transitioned to the
+ * stopped state, which is only upon a successful reset endpoint
+ * command. Better hope that last command worked!
+ */
+ if (!ret) {
+ xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+ /* We need to move the HW's dequeue pointer past this TD,
+ * or it will attempt to resend it on the next doorbell ring.
+ */
+ xhci_find_new_dequeue_state(xhci, udev->slot_id,
+ ep_index, ep_ring->stopped_td, &deq_state);
+ xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ udev->slot_id,
+ ep_index, &deq_state);
+ kfree(ep_ring->stopped_td);
+ xhci_ring_cmd_db(xhci);
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (ret)
+ xhci_warn(xhci, "FIXME allocate a new ring segment\n");
}
/*
@@ -1120,7 +1229,9 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_virt_device *virt_dev;
int ret = 0;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 temp;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u64 temp_64;
if (!udev->slot_id) {
xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -1133,10 +1244,12 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
- udev->slot_id);
+ ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+ udev->slot_id);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
@@ -1176,41 +1289,37 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
default:
xhci_err(xhci, "ERROR: unexpected command completion "
"code 0x%x.\n", virt_dev->cmd_status);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
ret = -EINVAL;
break;
}
if (ret) {
return ret;
}
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
- udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+ &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+ (unsigned long long)
+ xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
- (unsigned long long)virt_dev->out_ctx_dma);
+ (unsigned long long)virt_dev->out_ctx->dma);
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
/*
* USB core uses address 1 for the roothubs, so we add one to the
* address given back to us by the HC.
*/
- udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
/* Zero the input context control for later use */
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->drop_flags = 0;
- /* Mirror flags in the output context for future ep enable/disable */
- virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
- virt_dev->out_ctx->drop_flags = 0;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags = 0;
+ ctrl_ctx->drop_flags = 0;
xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
/* XXX Meh, not sure if anyone else but choose_address uses this. */
@@ -1252,7 +1361,6 @@ static int __init xhci_hcd_init(void)
/* xhci_device_control has eight fields, and also
* embeds one xhci_slot_ctx and 31 xhci_ep_ctx
*/
- BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);