diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/Kconfig | 4 | ||||
-rw-r--r-- | drivers/usb/host/pci-quirks.c | 104 | ||||
-rw-r--r-- | drivers/usb/host/pci-quirks.h | 2 | ||||
-rw-r--r-- | drivers/usb/host/xhci-hub.c | 36 | ||||
-rw-r--r-- | drivers/usb/host/xhci-pci.c | 6 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 11 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 9 | ||||
-rw-r--r-- | drivers/usb/host/xhci.h | 4 |
8 files changed, 141 insertions, 35 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a57d95c..ba98fc3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -45,9 +45,9 @@ config USB_XHCI_PLATFORM If unsure, say N. config USB_XHCI_MTK - tristate "xHCI support for Mediatek MT65xx" + tristate "xHCI support for Mediatek MT65xx/MT7621" select MFD_SYSCON - depends on ARCH_MEDIATEK || COMPILE_TEST + depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST ---help--- Say 'Y' to enable the support for the xHCI host controller found in Mediatek MT65xx SoCs. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index a9a1e4c..ee213c5 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -77,6 +77,16 @@ #define USB_INTEL_USB3_PSSEN 0xD8 #define USB_INTEL_USB3PRM 0xDC +/* ASMEDIA quirk use */ +#define ASMT_DATA_WRITE0_REG 0xF8 +#define ASMT_DATA_WRITE1_REG 0xFC +#define ASMT_CONTROL_REG 0xE0 +#define ASMT_CONTROL_WRITE_BIT 0x02 +#define ASMT_WRITEREG_CMD 0x10423 +#define ASMT_FLOWCTL_ADDR 0xFA30 +#define ASMT_FLOWCTL_DATA 0xBA +#define ASMT_PSEUDO_DATA 0 + /* * amd_chipset_gen values represent AMD different chipset generations */ @@ -88,6 +98,7 @@ enum amd_chipset_gen { AMD_CHIPSET_HUDSON2, AMD_CHIPSET_BOLTON, AMD_CHIPSET_YANGTZE, + AMD_CHIPSET_TAISHAN, AMD_CHIPSET_UNKNOWN, }; @@ -135,20 +146,26 @@ static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo) pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL); - if (!pinfo->smbus_dev) { - pinfo->sb_type.gen = NOT_AMD_CHIPSET; - return 0; + if (pinfo->smbus_dev) { + rev = pinfo->smbus_dev->revision; + if (rev >= 0x11 && rev <= 0x14) + pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2; + else if (rev >= 0x15 && rev <= 0x18) + pinfo->sb_type.gen = AMD_CHIPSET_BOLTON; + else if (rev >= 0x39 && rev <= 0x3a) + pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE; + } else { + pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x145c, NULL); + if (pinfo->smbus_dev) { + rev = pinfo->smbus_dev->revision; + pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN; + } else { + pinfo->sb_type.gen = NOT_AMD_CHIPSET; + return 0; + } } - - rev = pinfo->smbus_dev->revision; - if (rev >= 0x11 && rev <= 0x14) - pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2; - else if (rev >= 0x15 && rev <= 0x18) - pinfo->sb_type.gen = AMD_CHIPSET_BOLTON; - else if (rev >= 0x39 && rev <= 0x3a) - pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE; } - pinfo->sb_type.rev = rev; return 1; } @@ -250,11 +267,12 @@ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev) { /* Make sure amd chipset type has already been initialized */ usb_amd_find_chipset_info(); - if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE) - return 0; - - dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n"); - return 1; + if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE || + amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) { + dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n"); + return 1; + } + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk); @@ -412,6 +430,50 @@ void usb_amd_quirk_pll_disable(void) } EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable); +static int usb_asmedia_wait_write(struct pci_dev *pdev) +{ + unsigned long retry_count; + unsigned char value; + + for (retry_count = 1000; retry_count > 0; --retry_count) { + + pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value); + + if (value == 0xff) { + dev_err(&pdev->dev, "%s: check_ready ERROR", __func__); + return -EIO; + } + + if ((value & ASMT_CONTROL_WRITE_BIT) == 0) + return 0; + + udelay(50); + } + + dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__); + return -ETIMEDOUT; +} + +void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) +{ + if (usb_asmedia_wait_write(pdev) != 0) + return; + + /* send command and address to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); + + if (usb_asmedia_wait_write(pdev) != 0) + return; + + /* send data to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); +} +EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol); + void usb_amd_quirk_pll_enable(void) { usb_amd_quirk_pll(0); @@ -960,7 +1022,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); * * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS. * It signals to the BIOS that the OS wants control of the host controller, - * and then waits 5 seconds for the BIOS to hand over control. + * and then waits 1 second for the BIOS to hand over control. * If we timeout, assume the BIOS is broken and take control anyway. */ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) @@ -1007,9 +1069,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) if (val & XHCI_HC_BIOS_OWNED) { writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); - /* Wait for 5 seconds with 10 microsecond polling interval */ + /* Wait for 1 second with 10 microsecond polling interval */ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED, - 0, 5000, 10); + 0, 1000000, 10); /* Assume a buggy BIOS and take HC ownership anyway */ if (timeout) { @@ -1038,7 +1100,7 @@ hc_init: * operational or runtime registers. Wait 5 seconds and no more. */ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0, - 5000, 10); + 5000000, 10); /* Assume a buggy HC and start HC initialization anyway */ if (timeout) { val = readl(op_reg_base + XHCI_STS_OFFSET); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index c622ddf..6463fdb 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -11,6 +11,7 @@ bool usb_amd_prefetch_quirk(void); void usb_amd_dev_put(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); +void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); void sb800_prefetch(struct device *dev, int on); @@ -18,6 +19,7 @@ void sb800_prefetch(struct device *dev, int on); struct pci_dev; static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} +static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {} static inline void usb_amd_dev_put(void) {} static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} static inline void sb800_prefetch(struct device *dev, int on) {} diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 1d41637..0722f75 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -112,7 +112,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, /* If PSI table exists, add the custom speed attributes from it */ if (usb3_1 && xhci->usb3_rhub.psi_count) { - u32 ssp_cap_base, bm_attrib, psi; + u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp; int offset; ssp_cap_base = USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE; @@ -139,6 +139,15 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, for (i = 0; i < xhci->usb3_rhub.psi_count; i++) { psi = xhci->usb3_rhub.psi[i]; psi &= ~USB_SSP_SUBLINK_SPEED_RSVD; + psi_exp = XHCI_EXT_PORT_PSIE(psi); + psi_mant = XHCI_EXT_PORT_PSIM(psi); + + /* Shift to Gbps and set SSP Link BIT(14) if 10Gpbs */ + for (; psi_exp < 3; psi_exp++) + psi_mant /= 1000; + if (psi_mant >= 10) + psi |= BIT(14); + if ((psi & PLT_MASK) == PLT_SYM) { /* Symmetric, create SSA RX and TX from one PSI entry */ put_unaligned_le32(psi, &buf[offset]); @@ -403,15 +412,25 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) GFP_NOWAIT); if (!command) { spin_unlock_irqrestore(&xhci->lock, flags); - xhci_free_command(xhci, cmd); - return -ENOMEM; + ret = -ENOMEM; + goto cmd_cleanup; + } + ret = xhci_queue_stop_endpoint(xhci, command, slot_id, + i, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, command); + goto cmd_cleanup; } - xhci_queue_stop_endpoint(xhci, command, slot_id, i, - suspend); } } - xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + goto cmd_cleanup; + } + xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); @@ -422,6 +441,8 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); ret = -ETIME; } + +cmd_cleanup: xhci_free_command(xhci, cmd); return ret; } @@ -783,6 +804,9 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, clear_bit(wIndex, &bus_state->resuming_ports); set_bit(wIndex, &bus_state->rexit_ports); + + xhci_test_and_clear_bit(xhci, port_array, wIndex, + PORT_PLC); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 69864ba..c87ef38 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -54,6 +54,8 @@ #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 +#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 + static const char hcd_name[] = "xhci_hcd"; static struct hc_driver __read_mostly xhci_pci_hc_driver; @@ -205,6 +207,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x1142) xhci->quirks |= XHCI_TRUST_TX_LENGTH; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) + xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; + if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 521c181..63735b5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -860,13 +860,16 @@ static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci, (ep->ep_state & EP_GETTING_NO_STREAMS)) { int stream_id; - for (stream_id = 0; stream_id < ep->stream_info->num_streams; + for (stream_id = 1; stream_id < ep->stream_info->num_streams; stream_id++) { + ring = ep->stream_info->stream_rings[stream_id]; + if (!ring) + continue; + xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Killing URBs for slot ID %u, ep index %u, stream %u", - slot_id, ep_index, stream_id + 1); - xhci_kill_ring_urbs(xhci, - ep->stream_info->stream_rings[stream_id]); + slot_id, ep_index, stream_id); + xhci_kill_ring_urbs(xhci, ring); } } else { ring = ep->ring; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 34e23c7..a7d239f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -192,6 +192,9 @@ int xhci_reset(struct xhci_hcd *xhci) if (ret) return ret; + if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL) + usb_asmedia_modifyflowcontrol(to_pci_dev(xhci_to_hcd(xhci)->self.controller)); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Wait for controller to be ready for doorbell rings"); /* @@ -1122,6 +1125,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); + if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL) + usb_asmedia_modifyflowcontrol(to_pci_dev(hcd->self.controller)); + /* Re-enable port polling. */ xhci_dbg(xhci, "%s: starting port polling.\n", __func__); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); @@ -4849,7 +4855,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) */ hcd->has_tt = 1; } else { - if (xhci->sbrn == 0x31) { + /* Some 3.1 hosts return sbrn 0x30, can't rely on sbrn alone */ + if (xhci->sbrn == 0x31 || xhci->usb3_rhub.min_rev >= 1) { xhci_info(xhci, "Host supports USB 3.1 Enhanced SuperSpeed\n"); hcd->speed = HCD_USB31; hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 328fe06..836398a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1509,7 +1509,7 @@ struct xhci_bus_state { static inline unsigned int hcd_index(struct usb_hcd *hcd) { - if (hcd->speed == HCD_USB3) + if (hcd->speed >= HCD_USB3) return 0; else return 1; @@ -1660,6 +1660,8 @@ struct xhci_hcd { /* For controller with a broken Port Disable implementation */ #define XHCI_BROKEN_PORT_PED (1 << 25) #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26) +/* Reserved. It was XHCI_U2_DISABLE_WAKE */ +#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28) unsigned int num_active_eps; unsigned int limit_active_eps; |