diff options
Diffstat (limited to 'drivers/usb/host')
47 files changed, 3156 insertions, 3088 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0e6afa2..9483acd 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -91,17 +91,28 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_EHCI_HCD_PMC_MSP + tristate "EHCI support for on-chip PMC MSP71xx USB controller" + depends on USB_EHCI_HCD && MSP_HAS_USB + default n + select USB_EHCI_BIG_ENDIAN_DESC + select USB_EHCI_BIG_ENDIAN_MMIO + ---help--- + Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. + If unsure, say N. + config USB_EHCI_BIG_ENDIAN_MMIO bool depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || CPU_CAVIUM_OCTEON) + PPC_MPC512x || CPU_CAVIUM_OCTEON || \ + PMC_MSP) default y config USB_EHCI_BIG_ENDIAN_DESC bool depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x) + PPC_MPC512x || PMC_MSP) default y config XPS_USB_HCD_XILINX @@ -145,7 +156,7 @@ config USB_EHCI_MSM bool "Support for MSM on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MSM select USB_EHCI_ROOT_HUB_TT - select USB_MSM_OTG_72K + select USB_MSM_OTG ---help--- Enables support for the USB Host controller present on the Qualcomm chipsets. Root Hub has inbuilt TT. @@ -154,6 +165,14 @@ config USB_EHCI_MSM This driver is not supported on boards like trout which has an external PHY. +config USB_EHCI_TEGRA + boolean "NVIDIA Tegra HCD support" + depends on USB_EHCI_HCD && ARCH_TEGRA + select USB_EHCI_ROOT_HUB_TT + help + This driver enables support for the internal USB Host Controllers + found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. + config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" depends on USB_EHCI_HCD && PPC_OF @@ -162,6 +181,13 @@ config USB_EHCI_HCD_PPC_OF Enables support for the USB controller present on the PowerPC OpenFirmware platform bus. +config USB_EHCI_SH + bool "EHCI support for SuperH USB controller" + depends on USB_EHCI_HCD && SUPERH + ---help--- + Enables support for the on-chip EHCI controller on the SuperH. + If you use the PCI EHCI controller, this option is not necessary. + config USB_W90X900_EHCI bool "W90X900(W90P910) EHCI support" depends on USB_EHCI_HCD && ARCH_W90X900 @@ -315,6 +341,13 @@ config USB_OHCI_HCD_SSB If unsure, say N. +config USB_OHCI_SH + bool "OHCI support for SuperH USB controller" + depends on USB_OHCI_HCD && SUPERH + ---help--- + Enables support for the on-chip OHCI controller on the SuperH. + If you use the PCI OHCI controller, this option is not necessary. + config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module" depends on USB_OHCI_HCD && ARCH_CNS3XXX diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index d6a69d5..b2ed55c 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -115,7 +115,7 @@ static const struct hc_driver ehci_atmel_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; -static int __init ehci_atmel_drv_probe(struct platform_device *pdev) +static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; const struct hc_driver *driver = &ehci_atmel_hc_driver; @@ -207,7 +207,7 @@ fail_create_hcd: return retval; } -static int __exit ehci_atmel_drv_remove(struct platform_device *pdev) +static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); @@ -227,7 +227,7 @@ static int __exit ehci_atmel_drv_remove(struct platform_device *pdev) static struct platform_driver ehci_atmel_driver = { .probe = ehci_atmel_drv_probe, - .remove = __exit_p(ehci_atmel_drv_remove), + .remove = __devexit_p(ehci_atmel_drv_remove), .shutdown = usb_hcd_platform_shutdown, .driver.name = "atmel-ehci", }; diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 3be238a..693c29b 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -28,11 +28,9 @@ dev_warn (ehci_to_hcd(ehci)->self.controller , fmt , ## args ) #ifdef VERBOSE_DEBUG -# define vdbg dbg # define ehci_vdbg ehci_dbg #else -# define vdbg(fmt,args...) do { } while (0) -# define ehci_vdbg(ehci, fmt, args...) do { } while (0) + static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {} #endif #ifdef DEBUG diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 74dcf49..78561d1 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -114,13 +114,11 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n"); #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) -/* for ASPM quirk of ISOC on AMD SB800 */ -static struct pci_dev *amd_nb_dev; - /*-------------------------------------------------------------------------*/ #include "ehci.h" #include "ehci-dbg.c" +#include "pci-quirks.h" /*-------------------------------------------------------------------------*/ @@ -532,10 +530,8 @@ static void ehci_stop (struct usb_hcd *hcd) spin_unlock_irq (&ehci->lock); ehci_mem_cleanup (ehci); - if (amd_nb_dev) { - pci_dev_put(amd_nb_dev); - amd_nb_dev = NULL; - } + if (ehci->amd_pll_fix == 1) + usb_amd_dev_put(); #ifdef EHCI_STATS ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", @@ -679,7 +675,12 @@ static int ehci_run (struct usb_hcd *hcd) hcd->uses_new_polling = 1; /* EHCI spec section 4.1 */ - if ((retval = ehci_reset(ehci)) != 0) { + /* + * TDI driver does the ehci_reset in their reset callback. + * Don't reset here, because configuration settings will + * vanish. + */ + if (!ehci_is_TDI(ehci) && (retval = ehci_reset(ehci)) != 0) { ehci_mem_cleanup(ehci); return retval; } @@ -1179,7 +1180,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_mxc_driver #endif -#ifdef CONFIG_CPU_SUBTYPE_SH7786 +#ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver #endif @@ -1254,6 +1255,16 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_msm_driver #endif +#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP +#include "ehci-pmcmsp.c" +#define PLATFORM_DRIVER ehci_hcd_msp_driver +#endif + +#ifdef CONFIG_USB_EHCI_TEGRA +#include "ehci-tegra.c" +#define PLATFORM_DRIVER tegra_ehci_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) @@ -1306,24 +1317,24 @@ static int __init ehci_hcd_init(void) #endif #ifdef OF_PLATFORM_DRIVER - retval = of_register_platform_driver(&OF_PLATFORM_DRIVER); + retval = platform_driver_register(&OF_PLATFORM_DRIVER); if (retval < 0) goto clean3; #endif #ifdef XILINX_OF_PLATFORM_DRIVER - retval = of_register_platform_driver(&XILINX_OF_PLATFORM_DRIVER); + retval = platform_driver_register(&XILINX_OF_PLATFORM_DRIVER); if (retval < 0) goto clean4; #endif return retval; #ifdef XILINX_OF_PLATFORM_DRIVER - /* of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); */ + /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */ clean4: #endif #ifdef OF_PLATFORM_DRIVER - of_unregister_platform_driver(&OF_PLATFORM_DRIVER); + platform_driver_unregister(&OF_PLATFORM_DRIVER); clean3: #endif #ifdef PS3_SYSTEM_BUS_DRIVER @@ -1351,10 +1362,10 @@ module_init(ehci_hcd_init); static void __exit ehci_hcd_cleanup(void) { #ifdef XILINX_OF_PLATFORM_DRIVER - of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); + platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); #endif #ifdef OF_PLATFORM_DRIVER - of_unregister_platform_driver(&OF_PLATFORM_DRIVER); + platform_driver_unregister(&OF_PLATFORM_DRIVER); #endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 8a515f0..d05ea03 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -106,6 +106,27 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) ehci->owned_ports = 0; } +static int ehci_port_change(struct ehci_hcd *ehci) +{ + int i = HCS_N_PORTS(ehci->hcs_params); + + /* First check if the controller indicates a change event */ + + if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD) + return 1; + + /* + * Not all controllers appear to update this while going from D3 to D0, + * so check the individual port status registers as well + */ + + while (i--) + if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC) + return 1; + + return 0; +} + static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, bool suspending, bool do_wakeup) { @@ -173,7 +194,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, } /* Does the root hub have a port wakeup pending? */ - if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) + if (!suspending && ehci_port_change(ehci)) usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); spin_unlock_irqrestore(&ehci->lock, flags); @@ -538,14 +559,15 @@ static ssize_t store_companion(struct device *dev, } static DEVICE_ATTR(companion, 0644, show_companion, store_companion); -static inline void create_companion_file(struct ehci_hcd *ehci) +static inline int create_companion_file(struct ehci_hcd *ehci) { - int i; + int i = 0; /* with integrated TT there is no companion! */ if (!ehci_is_TDI(ehci)) i = device_create_file(ehci_to_hcd(ehci)->self.controller, &dev_attr_companion); + return i; } static inline void remove_companion_file(struct ehci_hcd *ehci) @@ -695,8 +717,8 @@ ehci_hub_descriptor ( desc->bDescLength = 7 + 2 * temp; /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset (&desc->bitmap [0], 0, temp); - memset (&desc->bitmap [temp], 0xff, temp); + memset(&desc->u.hs.DeviceRemovable[0], 0, temp); + memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); temp = 0x0008; /* per-port overcurrent reporting */ if (HCS_PPC (ehci->hcs_params)) diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c index b4d4d63..2111627 100644 --- a/drivers/usb/host/ehci-lpm.c +++ b/drivers/usb/host/ehci-lpm.c @@ -17,7 +17,8 @@ */ /* this file is part of ehci-hcd.c */ -static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num) +static int __maybe_unused ehci_lpm_set_da(struct ehci_hcd *ehci, + int dev_addr, int port_num) { u32 __iomem portsc; @@ -37,7 +38,7 @@ static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num) * this function is used to check if the device support LPM * if yes, mark the PORTSC register with PORT_LPM bit */ -static int ehci_lpm_check(struct ehci_hcd *ehci, int port) +static int __maybe_unused ehci_lpm_check(struct ehci_hcd *ehci, int port) { u32 __iomem *portsc ; u32 val32; diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 413f4de..9ce1b0b 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -1,6 +1,6 @@ /* ehci-msm.c - HSUSB Host Controller Driver Implementation * - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. * * Partly derived from ehci-fsl.c and ehci-hcd.c * Copyright (c) 2000-2004 by David Brownell @@ -34,92 +34,6 @@ static struct otg_transceiver *otg; -/* - * ehci_run defined in drivers/usb/host/ehci-hcd.c reset the controller and - * the configuration settings in ehci_msm_reset vanish after controller is - * reset. Resetting the controler in ehci_run seems to be un-necessary - * provided HCD reset the controller before calling ehci_run. Most of the HCD - * do but some are not. So this function is same as ehci_run but we don't - * reset the controller here. - */ -static int ehci_msm_run(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - u32 temp; - u32 hcc_params; - - hcd->uses_new_polling = 1; - - ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); - ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); - - /* - * hcc_params controls whether ehci->regs->segment must (!!!) - * be used; it constrains QH/ITD/SITD and QTD locations. - * pci_pool consistent memory always uses segment zero. - * streaming mappings for I/O buffers, like pci_map_single(), - * can return segments above 4GB, if the device allows. - * - * NOTE: the dma mask is visible through dma_supported(), so - * drivers can pass this info along ... like NETIF_F_HIGHDMA, - * Scsi_Host.highmem_io, and so forth. It's readonly to all - * host side drivers though. - */ - hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); - if (HCC_64BIT_ADDR(hcc_params)) - ehci_writel(ehci, 0, &ehci->regs->segment); - - /* - * Philips, Intel, and maybe others need CMD_RUN before the - * root hub will detect new devices (why?); NEC doesn't - */ - ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); - ehci->command |= CMD_RUN; - ehci_writel(ehci, ehci->command, &ehci->regs->command); - dbg_cmd(ehci, "init", ehci->command); - - /* - * Start, enabling full USB 2.0 functionality ... usb 1.1 devices - * are explicitly handed to companion controller(s), so no TT is - * involved with the root hub. (Except where one is integrated, - * and there's no companion controller unless maybe for USB OTG.) - * - * Turning on the CF flag will transfer ownership of all ports - * from the companions to the EHCI controller. If any of the - * companions are in the middle of a port reset at the time, it - * could cause trouble. Write-locking ehci_cf_port_reset_rwsem - * guarantees that no resets are in progress. After we set CF, - * a short delay lets the hardware catch up; new resets shouldn't - * be started before the port switching actions could complete. - */ - down_write(&ehci_cf_port_reset_rwsem); - hcd->state = HC_STATE_RUNNING; - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - usleep_range(5000, 5500); - up_write(&ehci_cf_port_reset_rwsem); - ehci->last_periodic_enable = ktime_get_real(); - - temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci_info(ehci, - "USB %x.%x started, EHCI %x.%02x%s\n", - ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - temp >> 8, temp & 0xff, - ignore_oc ? ", overcurrent ignored" : ""); - - ehci_writel(ehci, INTR_MASK, - &ehci->regs->intr_enable); /* Turn On Interrupts */ - - /* GRR this is run-once init(), being done every time the HC starts. - * So long as they're part of class devices, we can't do it init() - * since the class device isn't created that early. - */ - create_debug_files(ehci); - create_companion_file(ehci); - - return 0; -} - static int ehci_msm_reset(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -128,6 +42,8 @@ static int ehci_msm_reset(struct usb_hcd *hcd) ehci->caps = USB_CAPLENGTH; ehci->regs = USB_CAPLENGTH + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); /* cache the data to minimize the chip reads*/ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); @@ -135,6 +51,10 @@ static int ehci_msm_reset(struct usb_hcd *hcd) hcd->has_tt = 1; ehci->sbrn = HCD_USB2; + retval = ehci_halt(ehci); + if (retval) + return retval; + /* data structure init */ retval = ehci_init(hcd); if (retval) @@ -167,7 +87,7 @@ static struct hc_driver msm_hc_driver = { .flags = HCD_USB2 | HCD_MEMORY, .reset = ehci_msm_reset, - .start = ehci_msm_run, + .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index f784ceb..7e41a95 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -4,9 +4,10 @@ * Bus Glue for the EHCI controllers in OMAP3/4 * Tested on several OMAP3 boards, and OMAP4 Pandaboard * - * Copyright (C) 2007-2010 Texas Instruments, Inc. + * Copyright (C) 2007-2011 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Copyright (C) 2009 Nokia Corporation * Contact: Felipe Balbi <felipe.balbi@nokia.com> @@ -27,116 +28,19 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Nov 21, 2010): + * TODO (last updated Feb 27, 2010): * - add kernel-doc * - enable AUTOIDLE * - add suspend/resume - * - move workarounds to board-files - * - factor out code common to OHCI * - add HSIC and TLL support * - convert to use hwmod and runtime PM */ #include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/usb/ulpi.h> #include <plat/usb.h> -/* - * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES - * Use ehci_omap_readl()/ehci_omap_writel() functions - */ - -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) -#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) -#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) -#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) -#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) - -#define OMAP_TLL_CHANNEL_COUNT 3 -#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) -#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) -#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) - -/* UHH Register Set */ -#define OMAP_UHH_REVISION (0x00) -#define OMAP_UHH_SYSCONFIG (0x10) -#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) -#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_UHH_SYSSTATUS (0x14) -#define OMAP_UHH_HOSTCONFIG (0x40) -#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) -#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) -#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) -#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) -#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) -#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) -#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) - -/* OMAP4-specific defines */ -#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) -#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) - -#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) -#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) -#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) - -#define OMAP4_P1_MODE_CLEAR (3 << 16) -#define OMAP4_P1_MODE_TLL (1 << 16) -#define OMAP4_P1_MODE_HSIC (3 << 16) -#define OMAP4_P2_MODE_CLEAR (3 << 18) -#define OMAP4_P2_MODE_TLL (1 << 18) -#define OMAP4_P2_MODE_HSIC (3 << 18) - -#define OMAP_REV2_TLL_CHANNEL_COUNT 2 - -#define OMAP_UHH_DEBUG_CSR (0x44) - /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) #define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) @@ -148,137 +52,24 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Values of UHH_REVISION - Note: these are not given in the TRM */ -#define OMAP_EHCI_REV1 0x00000010 /* OMAP3 */ -#define OMAP_EHCI_REV2 0x50700100 /* OMAP4 */ - -#define is_omap_ehci_rev1(x) (x->omap_ehci_rev == OMAP_EHCI_REV1) -#define is_omap_ehci_rev2(x) (x->omap_ehci_rev == OMAP_EHCI_REV2) +/*-------------------------------------------------------------------------*/ -#define is_ehci_phy_mode(x) (x == EHCI_HCD_OMAP_MODE_PHY) -#define is_ehci_tll_mode(x) (x == EHCI_HCD_OMAP_MODE_TLL) -#define is_ehci_hsic_mode(x) (x == EHCI_HCD_OMAP_MODE_HSIC) +static const struct hc_driver ehci_omap_hc_driver; -/*-------------------------------------------------------------------------*/ -static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val) +static inline void ehci_write(void __iomem *base, u32 reg, u32 val) { __raw_writel(val, base + reg); } -static inline u32 ehci_omap_readl(void __iomem *base, u32 reg) +static inline u32 ehci_read(void __iomem *base, u32 reg) { return __raw_readl(base + reg); } -static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val) -{ - __raw_writeb(val, base + reg); -} - -static inline u8 ehci_omap_readb(void __iomem *base, u8 reg) -{ - return __raw_readb(base + reg); -} - -/*-------------------------------------------------------------------------*/ - -struct ehci_hcd_omap { - struct ehci_hcd *ehci; - struct device *dev; - - struct clk *usbhost_ick; - struct clk *usbhost_hs_fck; - struct clk *usbhost_fs_fck; - struct clk *usbtll_fck; - struct clk *usbtll_ick; - struct clk *xclk60mhsp1_ck; - struct clk *xclk60mhsp2_ck; - struct clk *utmi_p1_fck; - struct clk *utmi_p2_fck; - - /* FIXME the following two workarounds are - * board specific not silicon-specific so these - * should be moved to board-file instead. - * - * Maybe someone from TI will know better which - * board is affected and needs the workarounds - * to be applied - */ - - /* gpio for resetting phy */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* phy reset workaround */ - int phy_reset; - - /* IP revision */ - u32 omap_ehci_rev; - - /* desired phy_mode: TLL, PHY */ - enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; - - void __iomem *uhh_base; - void __iomem *tll_base; - void __iomem *ehci_base; - - /* Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - -/*-------------------------------------------------------------------------*/ - -static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask, - u8 tll_channel_count) -{ - unsigned reg; - int i; - - /* Program the 3 TLL channels upfront */ - for (i = 0; i < tll_channel_count; i++) { - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - - /* Disable AutoIdle, BitStuffing and use SDR Mode */ - reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE - | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF - | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); - ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - } - - /* Program Common TLL register */ - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON - | OMAP_TLL_SHARED_CONF_USB_DIVRATION - | OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - - ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Enable channels now */ - for (i = 0; i < tll_channel_count; i++) { - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - - /* Enable only the reg that is needed */ - if (!(tll_channel_mask & 1<<i)) - continue; - - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - - ehci_omap_writeb(omap->tll_base, - OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); - dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n", - i+1, ehci_omap_readb(omap->tll_base, - OMAP_TLL_ULPI_SCRATCH_REGISTER(i))); - } -} - -/*-------------------------------------------------------------------------*/ - -static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) +static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) { + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); unsigned long timeout = jiffies + msecs_to_jiffies(1000); unsigned reg = 0; @@ -292,266 +83,87 @@ static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) /* start ULPI access*/ | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT); - ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg); + ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg); /* Wait for ULPI access completion */ - while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI) + while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI) & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) { cpu_relax(); if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "phy reset operation timed out\n"); + dev_dbg(&pdev->dev, "phy reset operation timed out\n"); break; } } } -/* omap_start_ehc - * - Start the TI USBHOST controller - */ -static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - u8 tll_ch_mask = 0; - unsigned reg = 0; - int ret = 0; - - dev_dbg(omap->dev, "starting TI EHCI USB Controller\n"); - /* Enable Clocks for USBHOST */ - omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - ret = PTR_ERR(omap->usbhost_ick); - goto err_host_ick; - } - clk_enable(omap->usbhost_ick); - - omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck"); - if (IS_ERR(omap->usbhost_hs_fck)) { - ret = PTR_ERR(omap->usbhost_hs_fck); - goto err_host_120m_fck; - } - clk_enable(omap->usbhost_hs_fck); +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ - omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck"); - if (IS_ERR(omap->usbhost_fs_fck)) { - ret = PTR_ERR(omap->usbhost_fs_fck); - goto err_host_48m_fck; - } - clk_enable(omap->usbhost_fs_fck); - - if (omap->phy_reset) { - /* Refer: ISSUE1 */ - if (gpio_is_valid(omap->reset_gpio_port[0])) { - gpio_request(omap->reset_gpio_port[0], - "USB1 PHY reset"); - gpio_direction_output(omap->reset_gpio_port[0], 0); - } +/** + * ehci_hcd_omap_probe - initialize TI-based HCDs + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int ehci_hcd_omap_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; + struct resource *res; + struct usb_hcd *hcd; + void __iomem *regs; + struct ehci_hcd *omap_ehci; + int ret = -ENODEV; + int irq; - if (gpio_is_valid(omap->reset_gpio_port[1])) { - gpio_request(omap->reset_gpio_port[1], - "USB2 PHY reset"); - gpio_direction_output(omap->reset_gpio_port[1], 0); - } + if (usb_disabled()) + return -ENODEV; - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; } - /* Configure TLL for 60Mhz clk for ULPI */ - omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - ret = PTR_ERR(omap->usbtll_fck); - goto err_tll_fck; + irq = platform_get_irq_byname(pdev, "ehci-irq"); + if (irq < 0) { + dev_err(dev, "EHCI irq failed\n"); + return -ENODEV; } - clk_enable(omap->usbtll_fck); - omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - ret = PTR_ERR(omap->usbtll_ick); - goto err_tll_ick; + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "ehci"); + if (!res) { + dev_err(dev, "UHH EHCI get resource failed\n"); + return -ENODEV; } - clk_enable(omap->usbtll_ick); - - omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base, - OMAP_UHH_REVISION); - dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n", - omap->omap_ehci_rev); - /* - * Enable per-port clocks as needed (newer controllers only). - * - External ULPI clock for PHY mode - * - Internal clocks for TLL and HSIC modes (TODO) - */ - if (is_omap_ehci_rev2(omap)) { - switch (omap->port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap->xclk60mhsp1_ck = clk_get(omap->dev, - "xclk60mhsp1_ck"); - if (IS_ERR(omap->xclk60mhsp1_ck)) { - ret = PTR_ERR(omap->xclk60mhsp1_ck); - dev_err(omap->dev, - "Unable to get Port1 ULPI clock\n"); - } - - omap->utmi_p1_fck = clk_get(omap->dev, - "utmi_p1_gfclk"); - if (IS_ERR(omap->utmi_p1_fck)) { - ret = PTR_ERR(omap->utmi_p1_fck); - dev_err(omap->dev, - "Unable to get utmi_p1_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p1_fck, - omap->xclk60mhsp1_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P1 f-clock\n"); - } - break; - case EHCI_HCD_OMAP_MODE_TLL: - /* TODO */ - default: - break; - } - switch (omap->port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap->xclk60mhsp2_ck = clk_get(omap->dev, - "xclk60mhsp2_ck"); - if (IS_ERR(omap->xclk60mhsp2_ck)) { - ret = PTR_ERR(omap->xclk60mhsp2_ck); - dev_err(omap->dev, - "Unable to get Port2 ULPI clock\n"); - } - - omap->utmi_p2_fck = clk_get(omap->dev, - "utmi_p2_gfclk"); - if (IS_ERR(omap->utmi_p2_fck)) { - ret = PTR_ERR(omap->utmi_p2_fck); - dev_err(omap->dev, - "Unable to get utmi_p2_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p2_fck, - omap->xclk60mhsp2_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P2 f-clock\n"); - } - break; - case EHCI_HCD_OMAP_MODE_TLL: - /* TODO */ - default: - break; - } + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "UHH EHCI ioremap failed\n"); + return -ENOMEM; } - - /* perform TLL soft reset, and wait until reset is complete */ - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "operation timed out\n"); - ret = -EINVAL; - goto err_sys_status; - } + hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, + dev_name(dev)); + if (!hcd) { + dev_err(dev, "failed to create hcd with err %d\n", ret); + ret = -ENOMEM; + goto err_io; } - dev_dbg(omap->dev, "TLL RESET DONE\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_CACTIVITY); - - - /* Put UHH in NoIdle/NoStandby mode */ - reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); - if (is_omap_ehci_rev1(omap)) { - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = regs; - } else if (is_omap_ehci_rev2(omap)) { - reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; - reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; - } - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - - reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - /* setup ULPI bypass and burst configurations */ - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); - reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - - if (is_omap_ehci_rev1(omap)) { - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - /* Bypass the TLL module for PHY mode operation */ - if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); - if (is_ehci_phy_mode(omap->port_mode[0]) || - is_ehci_phy_mode(omap->port_mode[1]) || - is_ehci_phy_mode(omap->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (is_ehci_phy_mode(omap->port_mode[0])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[0])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - - if (is_ehci_phy_mode(omap->port_mode[1])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[1])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - - if (is_ehci_phy_mode(omap->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[2])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - } - } else if (is_omap_ehci_rev2(omap)) { - /* Clear port mode fields for PHY mode*/ - reg &= ~OMAP4_P1_MODE_CLEAR; - reg &= ~OMAP4_P2_MODE_CLEAR; - - if (is_ehci_tll_mode(omap->port_mode[0])) - reg |= OMAP4_P1_MODE_TLL; - else if (is_ehci_hsic_mode(omap->port_mode[0])) - reg |= OMAP4_P1_MODE_HSIC; - - if (is_ehci_tll_mode(omap->port_mode[1])) - reg |= OMAP4_P2_MODE_TLL; - else if (is_ehci_hsic_mode(omap->port_mode[1])) - reg |= OMAP4_P2_MODE_HSIC; + ret = omap_usbhs_enable(dev); + if (ret) { + dev_err(dev, "failed to start usbhs with err %d\n", ret); + goto err_enable; } - ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - - /* * An undocumented "feature" in the OMAP3 EHCI controller, * causes suspended ports to be taken out of suspend when @@ -561,363 +173,50 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) * to suspend. Writing 1 to this undocumented register bit * disables this feature and restores normal behavior. */ - ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04, + ehci_write(regs, EHCI_INSNREG04, EHCI_INSNREG04_DISABLE_UNSUSPEND); - if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || - (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || - (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { - - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK; - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK; - if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK; - - /* Enable UTMI mode for required TLL channels */ - omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT); - } - - if (omap->phy_reset) { - /* Refer ISSUE1: - * Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_set_value(omap->reset_gpio_port[0], 1); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_set_value(omap->reset_gpio_port[1], 1); - } - /* Soft reset the PHY using PHY reset command over ULPI */ - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) - omap_ehci_soft_phy_reset(omap, 0); - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) - omap_ehci_soft_phy_reset(omap, 1); - - return 0; - -err_sys_status: - clk_disable(omap->utmi_p2_fck); - clk_put(omap->utmi_p2_fck); - clk_disable(omap->xclk60mhsp2_ck); - clk_put(omap->xclk60mhsp2_ck); - clk_disable(omap->utmi_p1_fck); - clk_put(omap->utmi_p1_fck); - clk_disable(omap->xclk60mhsp1_ck); - clk_put(omap->xclk60mhsp1_ck); - clk_disable(omap->usbtll_ick); - clk_put(omap->usbtll_ick); - -err_tll_ick: - clk_disable(omap->usbtll_fck); - clk_put(omap->usbtll_fck); - -err_tll_fck: - clk_disable(omap->usbhost_fs_fck); - clk_put(omap->usbhost_fs_fck); - - if (omap->phy_reset) { - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_free(omap->reset_gpio_port[0]); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_free(omap->reset_gpio_port[1]); - } - -err_host_48m_fck: - clk_disable(omap->usbhost_hs_fck); - clk_put(omap->usbhost_hs_fck); + if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 0); + if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 1); -err_host_120m_fck: - clk_disable(omap->usbhost_ick); - clk_put(omap->usbhost_ick); - -err_host_ick: - return ret; -} - -static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - - dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); - - /* Reset OMAP modules for insmod/rmmod to work */ - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, - is_omap_ehci_rev2(omap) ? - OMAP4_UHH_SYSCONFIG_SOFTRESET : - OMAP_UHH_SYSCONFIG_SOFTRESET); - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 1))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 2))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); - - while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - if (omap->usbtll_fck != NULL) { - clk_disable(omap->usbtll_fck); - clk_put(omap->usbtll_fck); - omap->usbtll_fck = NULL; - } - - if (omap->usbhost_ick != NULL) { - clk_disable(omap->usbhost_ick); - clk_put(omap->usbhost_ick); - omap->usbhost_ick = NULL; - } - - if (omap->usbhost_fs_fck != NULL) { - clk_disable(omap->usbhost_fs_fck); - clk_put(omap->usbhost_fs_fck); - omap->usbhost_fs_fck = NULL; - } - - if (omap->usbhost_hs_fck != NULL) { - clk_disable(omap->usbhost_hs_fck); - clk_put(omap->usbhost_hs_fck); - omap->usbhost_hs_fck = NULL; - } - - if (omap->usbtll_ick != NULL) { - clk_disable(omap->usbtll_ick); - clk_put(omap->usbtll_ick); - omap->usbtll_ick = NULL; - } - - if (is_omap_ehci_rev2(omap)) { - if (omap->xclk60mhsp1_ck != NULL) { - clk_disable(omap->xclk60mhsp1_ck); - clk_put(omap->xclk60mhsp1_ck); - omap->xclk60mhsp1_ck = NULL; - } - - if (omap->utmi_p1_fck != NULL) { - clk_disable(omap->utmi_p1_fck); - clk_put(omap->utmi_p1_fck); - omap->utmi_p1_fck = NULL; - } - - if (omap->xclk60mhsp2_ck != NULL) { - clk_disable(omap->xclk60mhsp2_ck); - clk_put(omap->xclk60mhsp2_ck); - omap->xclk60mhsp2_ck = NULL; - } - - if (omap->utmi_p2_fck != NULL) { - clk_disable(omap->utmi_p2_fck); - clk_put(omap->utmi_p2_fck); - omap->utmi_p2_fck = NULL; - } - } - - if (omap->phy_reset) { - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_free(omap->reset_gpio_port[0]); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_free(omap->reset_gpio_port[1]); - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ehci_omap_hc_driver; - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - -/** - * ehci_hcd_omap_probe - initialize TI-based HCDs - * - * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - */ -static int ehci_hcd_omap_probe(struct platform_device *pdev) -{ - struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; - struct ehci_hcd_omap *omap; - struct resource *res; - struct usb_hcd *hcd; - - int irq = platform_get_irq(pdev, 0); - int ret = -ENODEV; - int i; - char supply[7]; - - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform_data\n"); - goto err_pdata; - } - - if (usb_disabled()) - goto err_disabled; - - omap = kzalloc(sizeof(*omap), GFP_KERNEL); - if (!omap) { - ret = -ENOMEM; - goto err_disabled; - } - - hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret); - ret = -ENOMEM; - goto err_create_hcd; - } - - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->phy_reset = pdata->phy_reset; - omap->reset_gpio_port[0] = pdata->reset_gpio_port[0]; - omap->reset_gpio_port[1] = pdata->reset_gpio_port[1]; - omap->reset_gpio_port[2] = pdata->reset_gpio_port[2]; - omap->port_mode[0] = pdata->port_mode[0]; - omap->port_mode[1] = pdata->port_mode[1]; - omap->port_mode[2] = pdata->port_mode[2]; - omap->ehci = hcd_to_ehci(hcd); - omap->ehci->sbrn = 0x20; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "EHCI ioremap failed\n"); - ret = -ENOMEM; - goto err_ioremap; - } + omap_ehci = hcd_to_ehci(hcd); + omap_ehci->sbrn = 0x20; /* we know this is the memory we want, no need to ioremap again */ - omap->ehci->caps = hcd->regs; - omap->ehci_base = hcd->regs; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(&pdev->dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_uhh_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(&pdev->dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll_ioremap; - } - - /* get ehci regulator and enable */ - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) { - omap->regulator[i] = NULL; - continue; - } - snprintf(supply, sizeof(supply), "hsusb%d", i); - omap->regulator[i] = regulator_get(omap->dev, supply); - if (IS_ERR(omap->regulator[i])) { - omap->regulator[i] = NULL; - dev_dbg(&pdev->dev, - "failed to get ehci port%d regulator\n", i); - } else { - regulator_enable(omap->regulator[i]); - } - } - - ret = omap_start_ehc(omap, hcd); - if (ret) { - dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret); - goto err_start; - } + omap_ehci->caps = hcd->regs; + omap_ehci->regs = hcd->regs + + HC_LENGTH(readl(&omap_ehci->caps->hc_capbase)); - omap->ehci->regs = hcd->regs - + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase)); - - dbg_hcs_params(omap->ehci, "reset"); - dbg_hcc_params(omap->ehci, "reset"); + dbg_hcs_params(omap_ehci, "reset"); + dbg_hcc_params(omap_ehci, "reset"); /* cache this readonly data; minimize chip reads */ - omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); + omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { - dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_err(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } /* root ports should always stay powered */ - ehci_port_power(omap->ehci, 1); + ehci_port_power(omap_ehci, 1); return 0; err_add_hcd: - omap_stop_ehc(omap, hcd); + omap_usbhs_disable(dev); -err_start: - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->regulator[i]) { - regulator_disable(omap->regulator[i]); - regulator_put(omap->regulator[i]); - } - } - iounmap(omap->tll_base); - -err_tll_ioremap: - iounmap(omap->uhh_base); - -err_uhh_ioremap: - iounmap(hcd->regs); - -err_ioremap: +err_enable: usb_put_hcd(hcd); -err_create_hcd: - kfree(omap); -err_disabled: -err_pdata: +err_io: return ret; } -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ /** * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs @@ -929,31 +228,18 @@ err_pdata: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); - int i; + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); usb_remove_hcd(hcd); - omap_stop_ehc(omap, hcd); - iounmap(hcd->regs); - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->regulator[i]) { - regulator_disable(omap->regulator[i]); - regulator_put(omap->regulator[i]); - } - } - iounmap(omap->tll_base); - iounmap(omap->uhh_base); + omap_usbhs_disable(dev); usb_put_hcd(hcd); - kfree(omap); - return 0; } static void ehci_hcd_omap_shutdown(struct platform_device *pdev) { - struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 0f87dc7..281e094 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -105,7 +105,8 @@ static int ehci_orion_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; - ehci_reset(ehci); + hcd->has_tt = 1; + retval = ehci_halt(ehci); if (retval) return retval; @@ -117,7 +118,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd) if (retval) return retval; - hcd->has_tt = 1; + ehci_reset(ehci); ehci_port_power(ehci, 0); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 07bb982..d5eaea7 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -44,42 +44,6 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) return 0; } -static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci) -{ - struct pci_dev *amd_smbus_dev; - u8 rev = 0; - - amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); - if (amd_smbus_dev) { - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); - if (rev < 0x40) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; - } - } else { - amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL); - if (!amd_smbus_dev) - return 0; - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); - if (rev < 0x11 || rev > 0x18) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; - } - } - - if (!amd_nb_dev) - amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL); - - ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n"); - - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - - return 1; -} - /* called during probe() after chip reset completes */ static int ehci_pci_setup(struct usb_hcd *hcd) { @@ -138,9 +102,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - if (ehci_quirk_amd_hudson(ehci)) - ehci->amd_l1_fix = 1; - retval = ehci_halt(ehci); if (retval) return retval; @@ -191,6 +152,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } break; case PCI_VENDOR_ID_AMD: + /* AMD PLL quirk */ + if (usb_amd_find_chipset_info()) + ehci->amd_pll_fix = 1; /* AMD8111 EHCI doesn't work, according to AMD errata */ if (pdev->device == 0x7463) { ehci_info(ehci, "ignoring AMD8111 (errata)\n"); @@ -236,6 +200,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } break; case PCI_VENDOR_ID_ATI: + /* AMD PLL quirk */ + if (usb_amd_find_chipset_info()) + ehci->amd_pll_fix = 1; /* SB600 and old version of SB700 have a bug in EHCI controller, * which causes usb devices lose response in some cases. */ diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c new file mode 100644 index 0000000..a216864 --- /dev/null +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -0,0 +1,383 @@ +/* + * PMC MSP EHCI (Host Controller Driver) for USB. + * + * (C) Copyright 2006-2010 PMC-Sierra Inc + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +/* includes */ +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/usb.h> +#include <msp_usb.h> + +/* stream disable*/ +#define USB_CTRL_MODE_STREAM_DISABLE 0x10 + +/* threshold */ +#define USB_CTRL_FIFO_THRESH 0x00300000 + +/* register offset for usb_mode */ +#define USB_EHCI_REG_USB_MODE 0x68 + +/* register offset for usb fifo */ +#define USB_EHCI_REG_USB_FIFO 0x24 + +/* register offset for usb status */ +#define USB_EHCI_REG_USB_STATUS 0x44 + +/* serial/parallel transceiver */ +#define USB_EHCI_REG_BIT_STAT_STS (1<<29) + +/* TWI USB0 host device pin */ +#define MSP_PIN_USB0_HOST_DEV 49 + +/* TWI USB1 host device pin */ +#define MSP_PIN_USB1_HOST_DEV 50 + + +static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci) +{ + u8 *base; + u8 *statreg; + u8 *fiforeg; + u32 val; + struct ehci_regs *reg_base = ehci->regs; + + /* get register base */ + base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE; + statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS; + fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO; + + /* Disable controller mode stream */ + val = ehci_readl(ehci, (u32 *)base); + ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE), + (u32 *)base); + + /* clear STS to select parallel transceiver interface */ + val = ehci_readl(ehci, (u32 *)statreg); + val = val & ~USB_EHCI_REG_BIT_STAT_STS; + ehci_writel(ehci, val, (u32 *)statreg); + + /* write to set the proper fifo threshold */ + ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg); + + /* set TWI GPIO USB_HOST_DEV pin high */ + gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1); +#ifdef CONFIG_MSP_HAS_DUAL_USB + gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1); +#endif +} + +/* called during probe() after chip reset completes */ +static int ehci_msp_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + hcd->has_tt = 1; + + retval = ehci_halt(ehci); + if (retval) + return retval; + + ehci_reset(ehci); + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + usb_hcd_tdi_set_mode(ehci); + ehci_port_power(ehci, 0); + + return retval; +} + + +/* configure so an HC device and id are always provided + * always called with process context; sleeping is OK + */ + +static int usb_hcd_msp_map_regs(struct mspusb_device *dev) +{ + struct resource *res; + struct platform_device *pdev = &dev->dev; + u32 res_len; + int retval; + + /* MAB register space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res == NULL) + return -ENOMEM; + res_len = res->end - res->start + 1; + if (!request_mem_region(res->start, res_len, "mab regs")) + return -EBUSY; + + dev->mab_regs = ioremap_nocache(res->start, res_len); + if (dev->mab_regs == NULL) { + retval = -ENOMEM; + goto err1; + } + + /* MSP USB register space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (res == NULL) { + retval = -ENOMEM; + goto err2; + } + res_len = res->end - res->start + 1; + if (!request_mem_region(res->start, res_len, "usbid regs")) { + retval = -EBUSY; + goto err2; + } + dev->usbid_regs = ioremap_nocache(res->start, res_len); + if (dev->usbid_regs == NULL) { + retval = -ENOMEM; + goto err3; + } + + return 0; +err3: + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + res_len = res->end - res->start + 1; + release_mem_region(res->start, res_len); +err2: + iounmap(dev->mab_regs); +err1: + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + res_len = res->end - res->start + 1; + release_mem_region(res->start, res_len); + dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n"); + return retval; +} + +/** + * usb_hcd_msp_probe - initialize PMC MSP-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_hcd_msp_probe(const struct hc_driver *driver, + struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + struct resource *res; + struct ehci_hcd *ehci ; + + hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp"); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) { + pr_debug("No IOMEM resource info for %s.\n", dev->name); + retval = -ENOMEM; + goto err1; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) { + retval = -EBUSY; + goto err1; + } + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_debug("ioremap failed"); + retval = -ENOMEM; + goto err2; + } + + res = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name); + retval = -ENOMEM; + goto err3; + } + + /* Map non-EHCI register spaces */ + retval = usb_hcd_msp_map_regs(to_mspusb_device(dev)); + if (retval != 0) + goto err3; + + ehci = hcd_to_ehci(hcd); + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + + + retval = usb_add_hcd(hcd, res->start, IRQF_SHARED); + if (retval == 0) + return 0; + + usb_remove_hcd(hcd); +err3: + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + + return retval; +} + + + +/** + * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_msp_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + * may be called without controller electrically present + * may be called with controller, bus, and devices active + */ +void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +#ifdef CONFIG_MSP_HAS_DUAL_USB +/* + * Wrapper around the main ehci_irq. Since both USB host controllers are + * sharing the same IRQ, need to first determine whether we're the intended + * recipient of this interrupt. + */ +static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd) +{ + u32 int_src; + struct device *dev = hcd->self.controller; + struct platform_device *pdev; + struct mspusb_device *mdev; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + /* need to reverse-map a couple of containers to get our device */ + pdev = to_platform_device(dev); + mdev = to_mspusb_device(pdev); + + /* Check to see if this interrupt is for this host controller */ + int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat); + if (int_src & (1 << pdev->id)) + return ehci_irq(hcd); + + /* Not for this device */ + return IRQ_NONE; +} +#endif /* DUAL_USB */ + +static const struct hc_driver ehci_msp_hc_driver = { + .description = hcd_name, + .product_desc = "PMC MSP EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ +#ifdef CONFIG_MSP_HAS_DUAL_USB + .irq = ehci_msp_irq, +#else + .irq = ehci_irq, +#endif + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_msp_setup, + .start = ehci_run, + .shutdown = ehci_shutdown, + .start = ehci_run, + .stop = ehci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_msp_drv_probe(struct platform_device *pdev) +{ + int ret; + + pr_debug("In ehci_hcd_msp_drv_probe"); + + if (usb_disabled()) + return -ENODEV; + + gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO"); +#ifdef CONFIG_MSP_HAS_DUAL_USB + gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO"); +#endif + + ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev); + + return ret; +} + +static int ehci_hcd_msp_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_hcd_msp_remove(hcd, pdev); + + /* free TWI GPIO USB_HOST_DEV pin */ + gpio_free(MSP_PIN_USB0_HOST_DEV); +#ifdef CONFIG_MSP_HAS_DUAL_USB + gpio_free(MSP_PIN_USB1_HOST_DEV); +#endif + + return 0; +} + +MODULE_ALIAS("pmcmsp-ehci"); + +static struct platform_driver ehci_hcd_msp_driver = { + .probe = ehci_hcd_msp_drv_probe, + .remove = ehci_hcd_msp_drv_remove, + .driver = { + .name = "pmcmsp-ehci", + .owner = THIS_MODULE, + }, +}; diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index ba52be4..1f09f25 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -105,8 +105,7 @@ ppc44x_enable_bmt(struct device_node *dn) } -static int __devinit -ehci_hcd_ppc_of_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; @@ -255,14 +254,12 @@ static int ehci_hcd_ppc_of_remove(struct platform_device *op) } -static int ehci_hcd_ppc_of_shutdown(struct platform_device *op) +static void ehci_hcd_ppc_of_shutdown(struct platform_device *op) { struct usb_hcd *hcd = dev_get_drvdata(&op->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); - - return 0; } @@ -275,7 +272,7 @@ static const struct of_device_id ehci_hcd_ppc_of_match[] = { MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match); -static struct of_platform_driver ehci_hcd_ppc_of_driver = { +static struct platform_driver ehci_hcd_ppc_of_driver = { .probe = ehci_hcd_ppc_of_probe, .remove = ehci_hcd_ppc_of_remove, .shutdown = ehci_hcd_ppc_of_shutdown, diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 233c288..fe99895 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1107,22 +1107,24 @@ submit_async ( struct list_head *qtd_list, gfp_t mem_flags ) { - struct ehci_qtd *qtd; int epnum; unsigned long flags; struct ehci_qh *qh = NULL; int rc; - qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list); epnum = urb->ep->desc.bEndpointAddress; #ifdef EHCI_URB_TRACE - ehci_dbg (ehci, - "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n", - __func__, urb->dev->devpath, urb, - epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out", - urb->transfer_buffer_length, - qtd, urb->ep->hcpriv); + { + struct ehci_qtd *qtd; + qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list); + ehci_dbg(ehci, + "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n", + __func__, urb->dev->devpath, urb, + epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out", + urb->transfer_buffer_length, + qtd, urb->ep->hcpriv); + } #endif spin_lock_irqsave (&ehci->lock, flags); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index aa46f57..1543c83 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1048,8 +1048,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) * not like a QH -- no persistent state (toggle, halt) */ if (stream->refcount == 1) { - int is_in; - // BUG_ON (!list_empty(&stream->td_list)); while (!list_empty (&stream->free_list)) { @@ -1076,7 +1074,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) } } - is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0; stream->bEndpointAddress &= 0x0f; if (stream->ep) stream->ep->hcpriv = NULL; @@ -1590,63 +1587,6 @@ itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd) *hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD); } -#define AB_REG_BAR_LOW 0xe0 -#define AB_REG_BAR_HIGH 0xe1 -#define AB_INDX(addr) ((addr) + 0x00) -#define AB_DATA(addr) ((addr) + 0x04) -#define NB_PCIE_INDX_ADDR 0xe0 -#define NB_PCIE_INDX_DATA 0xe4 -#define NB_PIF0_PWRDOWN_0 0x01100012 -#define NB_PIF0_PWRDOWN_1 0x01100013 - -static void ehci_quirk_amd_L1(struct ehci_hcd *ehci, int disable) -{ - u32 addr, addr_low, addr_high, val; - - outb_p(AB_REG_BAR_LOW, 0xcd6); - addr_low = inb_p(0xcd7); - outb_p(AB_REG_BAR_HIGH, 0xcd6); - addr_high = inb_p(0xcd7); - addr = addr_high << 8 | addr_low; - outl_p(0x30, AB_INDX(addr)); - outl_p(0x40, AB_DATA(addr)); - outl_p(0x34, AB_INDX(addr)); - val = inl_p(AB_DATA(addr)); - - if (disable) { - val &= ~0x8; - val |= (1 << 4) | (1 << 9); - } else { - val |= 0x8; - val &= ~((1 << 4) | (1 << 9)); - } - outl_p(val, AB_DATA(addr)); - - if (amd_nb_dev) { - addr = NB_PIF0_PWRDOWN_0; - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr); - pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val); - if (disable) - val &= ~(0x3f << 7); - else - val |= 0x3f << 7; - - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val); - - addr = NB_PIF0_PWRDOWN_1; - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr); - pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val); - if (disable) - val &= ~(0x3f << 7); - else - val |= 0x3f << 7; - - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val); - } - - return; -} - /* fit urb's itds into the selected schedule slot; activate as needed */ static int itd_link_urb ( @@ -1675,8 +1615,8 @@ itd_link_urb ( } if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 1); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_disable(); } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -1804,8 +1744,8 @@ itd_complete ( ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 0); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_enable(); } if (unlikely(list_is_singular(&stream->td_list))) { @@ -2095,8 +2035,8 @@ sitd_link_urb ( } if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 1); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_disable(); } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -2200,8 +2140,8 @@ sitd_complete ( ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 0); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_enable(); } if (list_is_singular(&stream->td_list)) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c new file mode 100644 index 0000000..a516af2 --- /dev/null +++ b/drivers/usb/host/ehci-tegra.c @@ -0,0 +1,715 @@ +/* + * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs + * + * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2009 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/platform_data/tegra_usb.h> +#include <linux/irq.h> +#include <linux/usb/otg.h> +#include <mach/usb_phy.h> + +#define TEGRA_USB_DMA_ALIGN 32 + +struct tegra_ehci_hcd { + struct ehci_hcd *ehci; + struct tegra_usb_phy *phy; + struct clk *clk; + struct clk *emc_clk; + struct otg_transceiver *transceiver; + int host_resumed; + int bus_suspended; + int port_resuming; + int power_down_on_bus_suspend; + enum tegra_usb_phy_port_speed port_speed; +}; + +static void tegra_ehci_power_up(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + clk_enable(tegra->emc_clk); + clk_enable(tegra->clk); + tegra_usb_phy_power_on(tegra->phy); + tegra->host_resumed = 1; +} + +static void tegra_ehci_power_down(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + tegra->host_resumed = 0; + tegra_usb_phy_power_off(tegra->phy); + clk_disable(tegra->clk); + clk_disable(tegra->emc_clk); +} + +static int tegra_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + u32 __iomem *status_reg; + u32 temp; + unsigned long flags; + int retval = 0; + + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; + + spin_lock_irqsave(&ehci->lock, flags); + + /* + * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits + * that are write on clear, by writing back the register read value, so + * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits + */ + if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) { + temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS; + ehci_writel(ehci, temp & ~PORT_PE, status_reg); + goto done; + } + + else if (typeReq == GetPortStatus) { + temp = ehci_readl(ehci, status_reg); + if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { + /* Resume completed, re-enable disconnect detection */ + tegra->port_resuming = 0; + tegra_usb_phy_postresume(tegra->phy); + } + } + + else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + /* + * If a transaction is in progress, there may be a delay in + * suspending the port. Poll until the port is suspended. + */ + if (handshake(ehci, status_reg, PORT_SUSPEND, + PORT_SUSPEND, 5000)) + pr_err("%s: timeout waiting for SUSPEND\n", __func__); + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + /* + * Tegra host controller will time the resume operation to clear the bit + * when the port control state switches to HS or FS Idle. This behavior + * is different from EHCI where the host controller driver is required + * to set this bit to a zero after the resume duration is timed in the + * driver. + */ + else if (typeReq == ClearPortFeature && + wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_RESET) || !(temp & PORT_PE)) { + retval = -EPIPE; + goto done; + } + + if (!(temp & PORT_SUSPEND)) + goto done; + + /* Disable disconnect detection during port resume */ + tegra_usb_phy_preresume(tegra->phy); + + ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25); + + temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); + /* start resume signalling */ + ehci_writel(ehci, temp | PORT_RESUME, status_reg); + + spin_unlock_irqrestore(&ehci->lock, flags); + msleep(20); + spin_lock_irqsave(&ehci->lock, flags); + + /* Poll until the controller clears RESUME and SUSPEND */ + if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000)) + pr_err("%s: timeout waiting for RESUME\n", __func__); + if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000)) + pr_err("%s: timeout waiting for SUSPEND\n", __func__); + + ehci->reset_done[wIndex-1] = 0; + + tegra->port_resuming = 1; + goto done; + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} + +static void tegra_ehci_restart(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci_reset(ehci); + + /* setup the frame list and Async q heads */ + ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); + ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); + /* setup the command register and set the controller in RUN mode */ + ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); + ehci->command |= CMD_RUN; + ehci_writel(ehci, ehci->command, &ehci->regs->command); + + down_write(&ehci_cf_port_reset_rwsem); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + /* flush posted writes */ + ehci_readl(ehci, &ehci->regs->command); + up_write(&ehci_cf_port_reset_rwsem); +} + +static int tegra_usb_suspend(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + struct ehci_regs __iomem *hw = tegra->ehci->regs; + unsigned long flags; + + spin_lock_irqsave(&tegra->ehci->lock, flags); + + tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; + ehci_halt(tegra->ehci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_unlock_irqrestore(&tegra->ehci->lock, flags); + + tegra_ehci_power_down(hcd); + return 0; +} + +static int tegra_usb_resume(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long val; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + tegra_ehci_power_up(hcd); + + if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { + /* Wait for the phy to detect new devices + * before we restart the controller */ + msleep(10); + goto restart; + } + + /* Force the phy to keep data lines in suspend state */ + tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + + /* Enable host mode */ + tdi_reset(ehci); + + /* Enable Port Power */ + val = readl(&hw->port_status[0]); + val |= PORT_POWER; + writel(val, &hw->port_status[0]); + udelay(10); + + /* Check if the phy resume from LP0. When the phy resume from LP0 + * USB register will be reset. */ + if (!readl(&hw->async_next)) { + /* Program the field PTC based on the saved speed mode */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) + val |= PORT_TEST_FORCE; + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) + val |= PORT_TEST(6); + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= PORT_TEST(7); + writel(val, &hw->port_status[0]); + udelay(10); + + /* Disable test mode by setting PTC field to NORMAL_OP */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + writel(val, &hw->port_status[0]); + udelay(10); + } + + /* Poll until CCS is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, + PORT_CONNECT, 2000)) { + pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); + goto restart; + } + + /* Poll until PE is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_PE, + PORT_PE, 2000)) { + pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); + goto restart; + } + + /* Clear the PCI status, to avoid an interrupt taken upon resume */ + val = readl(&hw->status); + val |= STS_PCD; + writel(val, &hw->status); + + /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ + val = readl(&hw->port_status[0]); + if ((val & PORT_POWER) && (val & PORT_PE)) { + val |= PORT_SUSPEND; + writel(val, &hw->port_status[0]); + + /* Wait until port suspend completes */ + if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, + PORT_SUSPEND, 1000)) { + pr_err("%s: timeout waiting for PORT_SUSPEND\n", + __func__); + goto restart; + } + } + + tegra_ehci_phy_restore_end(tegra->phy); + return 0; + +restart: + if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) + tegra_ehci_phy_restore_end(tegra->phy); + + tegra_ehci_restart(hcd); + return 0; +} + +static void tegra_ehci_shutdown(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + /* ehci_shutdown touches the USB controller registers, make sure + * controller has clocks to it */ + if (!tegra->host_resumed) + tegra_ehci_power_up(hcd); + + ehci_shutdown(hcd); +} + +static int tegra_ehci_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + /* EHCI registers start at offset 0x100 */ + ehci->caps = hcd->regs + 0x100; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(readl(&ehci->caps->hc_capbase)); + + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl(&ehci->caps->hcs_params); + + /* switch to host mode */ + hcd->has_tt = 1; + ehci_reset(ehci); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci->sbrn = 0x20; + + ehci_port_power(ehci, 1); + return retval; +} + +#ifdef CONFIG_PM +static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + int error_status = 0; + + error_status = ehci_bus_suspend(hcd); + if (!error_status && tegra->power_down_on_bus_suspend) { + tegra_usb_suspend(hcd); + tegra->bus_suspended = 1; + } + + return error_status; +} + +static int tegra_ehci_bus_resume(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { + tegra_usb_resume(hcd); + tegra->bus_suspended = 0; + } + + tegra_usb_phy_preresume(tegra->phy); + tegra->port_resuming = 1; + return ehci_bus_resume(hcd); +} +#endif + +struct temp_buffer { + void *kmalloc_ptr; + void *old_xfer_buffer; + u8 data[0]; +}; + +static void free_temp_buffer(struct urb *urb) +{ + enum dma_data_direction dir; + struct temp_buffer *temp; + + if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) + return; + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + temp = container_of(urb->transfer_buffer, struct temp_buffer, + data); + + if (dir == DMA_FROM_DEVICE) + memcpy(temp->old_xfer_buffer, temp->data, + urb->transfer_buffer_length); + urb->transfer_buffer = temp->old_xfer_buffer; + kfree(temp->kmalloc_ptr); + + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; +} + +static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) +{ + enum dma_data_direction dir; + struct temp_buffer *temp, *kmalloc_ptr; + size_t kmalloc_size; + + if (urb->num_sgs || urb->sg || + urb->transfer_buffer_length == 0 || + !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1))) + return 0; + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + /* Allocate a buffer with enough padding for alignment */ + kmalloc_size = urb->transfer_buffer_length + + sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1; + + kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); + if (!kmalloc_ptr) + return -ENOMEM; + + /* Position our struct temp_buffer such that data is aligned */ + temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1; + + temp->kmalloc_ptr = kmalloc_ptr; + temp->old_xfer_buffer = urb->transfer_buffer; + if (dir == DMA_TO_DEVICE) + memcpy(temp->data, urb->transfer_buffer, + urb->transfer_buffer_length); + urb->transfer_buffer = temp->data; + + urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; + + return 0; +} + +static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + int ret; + + ret = alloc_temp_buffer(urb, mem_flags); + if (ret) + return ret; + + ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); + if (ret) + free_temp_buffer(urb); + + return ret; +} + +static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + usb_hcd_unmap_urb_for_dma(hcd, urb); + free_temp_buffer(urb); +} + +static const struct hc_driver tegra_ehci_hc_driver = { + .description = hcd_name, + .product_desc = "Tegra EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + .flags = HCD_USB2 | HCD_MEMORY, + + .reset = tegra_ehci_setup, + .irq = ehci_irq, + + .start = ehci_run, + .stop = ehci_stop, + .shutdown = tegra_ehci_shutdown, + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .map_urb_for_dma = tegra_ehci_map_urb_for_dma, + .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + .get_frame_number = ehci_get_frame, + .hub_status_data = ehci_hub_status_data, + .hub_control = tegra_ehci_hub_control, + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +#ifdef CONFIG_PM + .bus_suspend = tegra_ehci_bus_suspend, + .bus_resume = tegra_ehci_bus_resume, +#endif + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, +}; + +static int tegra_ehci_probe(struct platform_device *pdev) +{ + struct resource *res; + struct usb_hcd *hcd; + struct tegra_ehci_hcd *tegra; + struct tegra_ehci_platform_data *pdata; + int err = 0; + int irq; + int instance = pdev->id; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Platform data missing\n"); + return -EINVAL; + } + + tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL); + if (!tegra) + return -ENOMEM; + + hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) { + dev_err(&pdev->dev, "Unable to create HCD\n"); + err = -ENOMEM; + goto fail_hcd; + } + + platform_set_drvdata(pdev, tegra); + + tegra->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(tegra->clk)) { + dev_err(&pdev->dev, "Can't get ehci clock\n"); + err = PTR_ERR(tegra->clk); + goto fail_clk; + } + + err = clk_enable(tegra->clk); + if (err) + goto fail_clken; + + tegra->emc_clk = clk_get(&pdev->dev, "emc"); + if (IS_ERR(tegra->emc_clk)) { + dev_err(&pdev->dev, "Can't get emc clock\n"); + err = PTR_ERR(tegra->emc_clk); + goto fail_emc_clk; + } + + clk_enable(tegra->emc_clk); + clk_set_rate(tegra->emc_clk, 400000000); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get I/O memory\n"); + err = -ENXIO; + goto fail_io; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = ioremap(res->start, resource_size(res)); + if (!hcd->regs) { + dev_err(&pdev->dev, "Failed to remap I/O memory\n"); + err = -ENOMEM; + goto fail_io; + } + + tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config, + TEGRA_USB_PHY_MODE_HOST); + if (IS_ERR(tegra->phy)) { + dev_err(&pdev->dev, "Failed to open USB phy\n"); + err = -ENXIO; + goto fail_phy; + } + + err = tegra_usb_phy_power_on(tegra->phy); + if (err) { + dev_err(&pdev->dev, "Failed to power on the phy\n"); + goto fail; + } + + tegra->host_resumed = 1; + tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; + tegra->ehci = hcd_to_ehci(hcd); + + irq = platform_get_irq(pdev, 0); + if (!irq) { + dev_err(&pdev->dev, "Failed to get IRQ\n"); + err = -ENODEV; + goto fail; + } + set_irq_flags(irq, IRQF_VALID); + +#ifdef CONFIG_USB_OTG_UTILS + if (pdata->operating_mode == TEGRA_USB_OTG) { + tegra->transceiver = otg_get_transceiver(); + if (tegra->transceiver) + otg_set_host(tegra->transceiver, &hcd->self); + } +#endif + + err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (err) { + dev_err(&pdev->dev, "Failed to add USB HCD\n"); + goto fail; + } + + return err; + +fail: +#ifdef CONFIG_USB_OTG_UTILS + if (tegra->transceiver) { + otg_set_host(tegra->transceiver, NULL); + otg_put_transceiver(tegra->transceiver); + } +#endif + tegra_usb_phy_close(tegra->phy); +fail_phy: + iounmap(hcd->regs); +fail_io: + clk_disable(tegra->emc_clk); + clk_put(tegra->emc_clk); +fail_emc_clk: + clk_disable(tegra->clk); +fail_clken: + clk_put(tegra->clk); +fail_clk: + usb_put_hcd(hcd); +fail_hcd: + kfree(tegra); + return err; +} + +#ifdef CONFIG_PM +static int tegra_ehci_resume(struct platform_device *pdev) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (tegra->bus_suspended) + return 0; + + return tegra_usb_resume(hcd); +} + +static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (tegra->bus_suspended) + return 0; + + if (time_before(jiffies, tegra->ehci->next_statechange)) + msleep(10); + + return tegra_usb_suspend(hcd); +} +#endif + +static int tegra_ehci_remove(struct platform_device *pdev) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (tegra == NULL || hcd == NULL) + return -EINVAL; + +#ifdef CONFIG_USB_OTG_UTILS + if (tegra->transceiver) { + otg_set_host(tegra->transceiver, NULL); + otg_put_transceiver(tegra->transceiver); + } +#endif + + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + + tegra_usb_phy_close(tegra->phy); + iounmap(hcd->regs); + + clk_disable(tegra->clk); + clk_put(tegra->clk); + + clk_disable(tegra->emc_clk); + clk_put(tegra->emc_clk); + + kfree(tegra); + return 0; +} + +static void tegra_ehci_hcd_shutdown(struct platform_device *pdev) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} + +static struct platform_driver tegra_ehci_driver = { + .probe = tegra_ehci_probe, + .remove = tegra_ehci_remove, +#ifdef CONFIG_PM + .suspend = tegra_ehci_suspend, + .resume = tegra_ehci_resume, +#endif + .shutdown = tegra_ehci_hcd_shutdown, + .driver = { + .name = "tegra-ehci", + } +}; diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index e8f4f36..effc58d 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -29,6 +29,7 @@ #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/of_address.h> /** * ehci_xilinx_of_setup - Initialize the device for ehci_reset() @@ -142,15 +143,13 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = { /** * ehci_hcd_xilinx_of_probe - Probe method for the USB host controller * @op: pointer to the platform_device bound to the host controller - * @match: pointer to of_device_id structure, not used * * This function requests resources and sets up appropriate properties for the * host controller. Because the Xilinx USB host controller can be configured * as HS only or HS/FS only, it checks the configuration in the device tree * entry, and sets an appropriate value for hcd->has_tt. */ -static int __devinit -ehci_hcd_xilinx_of_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; @@ -288,7 +287,7 @@ static const struct of_device_id ehci_hcd_xilinx_of_match[] = { }; MODULE_DEVICE_TABLE(of, ehci_hcd_xilinx_of_match); -static struct of_platform_driver ehci_hcd_xilinx_of_driver = { +static struct platform_driver ehci_hcd_xilinx_of_driver = { .probe = ehci_hcd_xilinx_of_probe, .remove = ehci_hcd_xilinx_of_remove, .shutdown = ehci_hcd_xilinx_of_shutdown, diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 799ac16..f86d3fa 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -131,7 +131,7 @@ struct ehci_hcd { /* one per controller */ unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; unsigned broken_periodic:1; - unsigned amd_l1_fix:1; + unsigned amd_pll_fix:1; unsigned fs_i_thresh:1; /* Intel iso scheduling */ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 12fd184..b84ff7e 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -561,8 +561,7 @@ static const struct hc_driver fhci_driver = { .hub_control = fhci_hub_control, }; -static int __devinit of_fhci_probe(struct platform_device *ofdev, - const struct of_device_id *ofid) +static int __devinit of_fhci_probe(struct platform_device *ofdev) { struct device *dev = &ofdev->dev; struct device_node *node = dev->of_node; @@ -812,7 +811,7 @@ static const struct of_device_id of_fhci_match[] = { }; MODULE_DEVICE_TABLE(of, of_fhci_match); -static struct of_platform_driver of_fhci_driver = { +static struct platform_driver of_fhci_driver = { .driver = { .name = "fsl,usb-fhci", .owner = THIS_MODULE, @@ -824,13 +823,13 @@ static struct of_platform_driver of_fhci_driver = { static int __init fhci_module_init(void) { - return of_register_platform_driver(&of_fhci_driver); + return platform_driver_register(&of_fhci_driver); } module_init(fhci_module_init); static void __exit fhci_module_exit(void) { - of_unregister_platform_driver(&of_fhci_driver); + platform_driver_unregister(&of_fhci_driver); } module_exit(fhci_module_exit); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index f90d003..2562e92 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -927,7 +927,8 @@ static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) if (state == US_CTRL_SETUP) { dir = TD_DIR_SETUP; if (unsuitable_for_dma(urb->setup_dma)) - unmap_urb_setup_for_dma(imx21->hcd, urb); + usb_hcd_unmap_urb_setup_for_dma(imx21->hcd, + urb); etd->dma_handle = urb->setup_dma; etd->cpu_buffer = urb->setup_packet; bufround = 0; @@ -943,7 +944,7 @@ static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN; bufround = (dir == TD_DIR_IN) ? 1 : 0; if (unsuitable_for_dma(urb->transfer_dma)) - unmap_urb_for_dma(imx21->hcd, urb); + usb_hcd_unmap_urb_for_dma(imx21->hcd, urb); etd->dma_handle = urb->transfer_dma; etd->cpu_buffer = urb->transfer_buffer; @@ -1471,8 +1472,8 @@ static int get_hub_descriptor(struct usb_hcd *hcd, 0x0010 | /* No over current protection */ 0); - desc->bitmap[0] = 1 << 1; - desc->bitmap[1] = ~0; + desc->u.hs.DeviceRemovable[0] = 1 << 1; + desc->u.hs.DeviceRemovable[1] = ~0; return 0; } diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 0da7fc0..c0e22f2 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -951,9 +951,9 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x, /* Power switching, device type, overcurrent. */ desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f)); desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff); - /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = 0; - desc->bitmap[1] = ~0; + /* ports removable, and legacy PortPwrCtrlMask */ + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = ~0; } /* Perform reset of a given port. diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 43a39eb..662cd00 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -226,7 +226,6 @@ static int claim_ptd_buffers(struct isp1362_ep_queue *epq, static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1362_ep *ep) { - int index = ep->ptd_index; int last = ep->ptd_index + ep->num_ptds; if (last > epq->buf_count) @@ -236,10 +235,8 @@ static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1 epq->buf_map, epq->skip_map); BUG_ON(last > epq->buf_count); - for (; index < last; index++) { - __clear_bit(index, &epq->buf_map); - __set_bit(index, &epq->skip_map); - } + bitmap_clear(&epq->buf_map, ep->ptd_index, ep->num_ptds); + bitmap_set(&epq->skip_map, ep->ptd_index, ep->num_ptds); epq->buf_avail += ep->num_ptds; epq->ptd_count--; @@ -1555,9 +1552,9 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd, desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & 0x1f); DBG(0, "%s: hubcharacteristics = %02x\n", __func__, cpu_to_le16((reg >> 8) & 0x1f)); desc->bPwrOn2PwrGood = (reg >> 24) & 0xff; - /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; - desc->bitmap[1] = ~0; + /* ports removable, and legacy PortPwrCtrlMask */ + desc->u.hs.DeviceRemovable[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; + desc->u.hs.DeviceRemovable[1] = ~0; DBG(3, "%s: exit\n", __func__); } diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index bdba8c5..f50e84a 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -33,6 +33,7 @@ struct isp1760_hcd { struct inter_packet_info atl_ints[32]; struct inter_packet_info int_ints[32]; struct memory_chunk memory_pool[BLOCKS]; + u32 atl_queued; /* periodic schedule support */ #define DEFAULT_I_TDPS 1024 @@ -47,10 +48,6 @@ static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd) { return (struct isp1760_hcd *) (hcd->hcd_priv); } -static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv) -{ - return container_of((void *) priv, struct usb_hcd, hcd_priv); -} /* Section 2.2 Host Controller Capability Registers */ #define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ @@ -80,11 +77,10 @@ static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv) #define PORT_RWC_BITS (PORT_CSC) struct isp1760_qtd { - struct isp1760_qtd *hw_next; u8 packet_type; - u8 toggle; - void *data_buffer; + u32 payload_addr; + /* the rest is HCD-private */ struct list_head qtd_list; struct urb *urb; @@ -92,205 +88,267 @@ struct isp1760_qtd { /* isp special*/ u32 status; -#define URB_COMPLETE_NOTIFY (1 << 0) #define URB_ENQUEUED (1 << 1) -#define URB_TYPE_ATL (1 << 2) -#define URB_TYPE_INT (1 << 3) }; struct isp1760_qh { /* first part defined by EHCI spec */ struct list_head qtd_list; - struct isp1760_hcd *priv; - - /* periodic schedule info */ - unsigned short period; /* polling interval */ - struct usb_device *dev; u32 toggle; u32 ping; }; -#define ehci_port_speed(priv, portsc) USB_PORT_STAT_HIGH_SPEED - -static unsigned int isp1760_readl(__u32 __iomem *regs) +/* + * Access functions for isp176x registers (addresses 0..0x03FF). + */ +static u32 reg_read32(void __iomem *base, u32 reg) { - return readl(regs); + return readl(base + reg); } -static void isp1760_writel(const unsigned int val, __u32 __iomem *regs) +static void reg_write32(void __iomem *base, u32 reg, u32 val) { - writel(val, regs); + writel(val, base + reg); } /* - * The next two copy via MMIO data to/from the device. memcpy_{to|from}io() + * Access functions for isp176x memory (offset >= 0x0400). + * + * bank_reads8() reads memory locations prefetched by an earlier write to + * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi- + * bank optimizations, you should use the more generic mem_reads8() below. + * + * For access to ptd memory, use the specialized ptd_read() and ptd_write() + * below. + * + * These functions copy via MMIO data to/from the device. memcpy_{to|from}io() * doesn't quite work because some people have to enforce 32-bit access */ -static void priv_read_copy(struct isp1760_hcd *priv, u32 *src, - __u32 __iomem *dst, u32 len) +static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr, + __u32 *dst, u32 bytes) { + __u32 __iomem *src; u32 val; - u8 *buff8; + __u8 *src_byteptr; + __u8 *dst_byteptr; - if (!src) { - printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len); - return; - } + src = src_base + (bank_addr | src_offset); - while (len >= 4) { - *src = __raw_readl(dst); - len -= 4; - src++; - dst++; + if (src_offset < PAYLOAD_OFFSET) { + while (bytes >= 4) { + *dst = le32_to_cpu(__raw_readl(src)); + bytes -= 4; + src++; + dst++; + } + } else { + while (bytes >= 4) { + *dst = __raw_readl(src); + bytes -= 4; + src++; + dst++; + } } - if (!len) + if (!bytes) return; /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully * allocated. */ - val = isp1760_readl(dst); - - buff8 = (u8 *)src; - while (len) { - - *buff8 = val; - val >>= 8; - len--; - buff8++; + if (src_offset < PAYLOAD_OFFSET) + val = le32_to_cpu(__raw_readl(src)); + else + val = __raw_readl(src); + + dst_byteptr = (void *) dst; + src_byteptr = (void *) &val; + while (bytes > 0) { + *dst_byteptr = *src_byteptr; + dst_byteptr++; + src_byteptr++; + bytes--; } } -static void priv_write_copy(const struct isp1760_hcd *priv, const u32 *src, - __u32 __iomem *dst, u32 len) +static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst, + u32 bytes) { - while (len >= 4) { - __raw_writel(*src, dst); - len -= 4; - src++; - dst++; + reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0)); + ndelay(90); + bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes); +} + +static void mem_writes8(void __iomem *dst_base, u32 dst_offset, + __u32 const *src, u32 bytes) +{ + __u32 __iomem *dst; + + dst = dst_base + dst_offset; + + if (dst_offset < PAYLOAD_OFFSET) { + while (bytes >= 4) { + __raw_writel(cpu_to_le32(*src), dst); + bytes -= 4; + src++; + dst++; + } + } else { + while (bytes >= 4) { + __raw_writel(*src, dst); + bytes -= 4; + src++; + dst++; + } } - if (!len) + if (!bytes) return; - /* in case we have 3, 2 or 1 by left. The buffer is allocated and the - * extra bytes should not be read by the HW + /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the + * extra bytes should not be read by the HW. */ - __raw_writel(*src, dst); + if (dst_offset < PAYLOAD_OFFSET) + __raw_writel(cpu_to_le32(*src), dst); + else + __raw_writel(*src, dst); +} + +/* + * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET, + * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32. + */ +static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + reg_write32(base, HC_MEMORY_REG, + ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd)); + ndelay(90); + bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0), + (void *) ptd, sizeof(*ptd)); +} + +static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0), + &ptd->dw1, 7*sizeof(ptd->dw1)); + /* Make sure dw0 gets written last (after other dw's and after payload) + since it contains the enable bit */ + wmb(); + mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0, + sizeof(ptd->dw0)); } + /* memory management of the 60kb on the chip from 0x1000 to 0xffff */ static void init_memory(struct isp1760_hcd *priv) { - int i; - u32 payload; + int i, curr; + u32 payload_addr; - payload = 0x1000; + payload_addr = PAYLOAD_OFFSET; for (i = 0; i < BLOCK_1_NUM; i++) { - priv->memory_pool[i].start = payload; + priv->memory_pool[i].start = payload_addr; priv->memory_pool[i].size = BLOCK_1_SIZE; priv->memory_pool[i].free = 1; - payload += priv->memory_pool[i].size; + payload_addr += priv->memory_pool[i].size; } - - for (i = BLOCK_1_NUM; i < BLOCK_1_NUM + BLOCK_2_NUM; i++) { - priv->memory_pool[i].start = payload; - priv->memory_pool[i].size = BLOCK_2_SIZE; - priv->memory_pool[i].free = 1; - payload += priv->memory_pool[i].size; + curr = i; + for (i = 0; i < BLOCK_2_NUM; i++) { + priv->memory_pool[curr + i].start = payload_addr; + priv->memory_pool[curr + i].size = BLOCK_2_SIZE; + priv->memory_pool[curr + i].free = 1; + payload_addr += priv->memory_pool[curr + i].size; } - - for (i = BLOCK_1_NUM + BLOCK_2_NUM; i < BLOCKS; i++) { - priv->memory_pool[i].start = payload; - priv->memory_pool[i].size = BLOCK_3_SIZE; - priv->memory_pool[i].free = 1; - payload += priv->memory_pool[i].size; + curr = i; + for (i = 0; i < BLOCK_3_NUM; i++) { + priv->memory_pool[curr + i].start = payload_addr; + priv->memory_pool[curr + i].size = BLOCK_3_SIZE; + priv->memory_pool[curr + i].free = 1; + payload_addr += priv->memory_pool[curr + i].size; } - BUG_ON(payload - priv->memory_pool[i - 1].size > PAYLOAD_SIZE); + BUG_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE); } -static u32 alloc_mem(struct isp1760_hcd *priv, u32 size) +static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); int i; - if (!size) - return ISP1760_NULL_POINTER; + BUG_ON(qtd->payload_addr); + + if (!qtd->length) + return; for (i = 0; i < BLOCKS; i++) { - if (priv->memory_pool[i].size >= size && + if (priv->memory_pool[i].size >= qtd->length && priv->memory_pool[i].free) { - priv->memory_pool[i].free = 0; - return priv->memory_pool[i].start; + qtd->payload_addr = priv->memory_pool[i].start; + return; } } - printk(KERN_ERR "ISP1760 MEM: can not allocate %d bytes of memory\n", - size); - printk(KERN_ERR "Current memory map:\n"); + dev_err(hcd->self.controller, + "%s: Can not allocate %lu bytes of memory\n" + "Current memory map:\n", + __func__, qtd->length); for (i = 0; i < BLOCKS; i++) { - printk(KERN_ERR "Pool %2d size %4d status: %d\n", + dev_err(hcd->self.controller, "Pool %2d size %4d status: %d\n", i, priv->memory_pool[i].size, priv->memory_pool[i].free); } /* XXX maybe -ENOMEM could be possible */ BUG(); - return 0; + return; } -static void free_mem(struct isp1760_hcd *priv, u32 mem) +static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); int i; - if (mem == ISP1760_NULL_POINTER) + if (!qtd->payload_addr) return; for (i = 0; i < BLOCKS; i++) { - if (priv->memory_pool[i].start == mem) { - + if (priv->memory_pool[i].start == qtd->payload_addr) { BUG_ON(priv->memory_pool[i].free); - priv->memory_pool[i].free = 1; - return ; + qtd->payload_addr = 0; + return; } } - printk(KERN_ERR "Trying to free not-here-allocated memory :%08x\n", - mem); + dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n", + __func__, qtd->payload_addr); BUG(); } static void isp1760_init_regs(struct usb_hcd *hcd) { - isp1760_writel(0, hcd->regs + HC_BUFFER_STATUS_REG); - isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); - isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + - HC_INT_PTD_SKIPMAP_REG); - isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + - HC_ISO_PTD_SKIPMAP_REG); - - isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + - HC_ATL_PTD_DONEMAP_REG); - isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + - HC_INT_PTD_DONEMAP_REG); - isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + - HC_ISO_PTD_DONEMAP_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); + + reg_write32(hcd->regs, HC_ATL_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_INT_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_ISO_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE); } -static int handshake(struct isp1760_hcd *priv, void __iomem *ptr, +static int handshake(struct usb_hcd *hcd, u32 reg, u32 mask, u32 done, int usec) { u32 result; do { - result = isp1760_readl(ptr); + result = reg_read32(hcd->regs, reg); if (result == ~0) return -ENODEV; result &= mask; @@ -303,17 +361,18 @@ static int handshake(struct isp1760_hcd *priv, void __iomem *ptr, } /* reset a non-running (STS_HALT == 1) controller */ -static int ehci_reset(struct isp1760_hcd *priv) +static int ehci_reset(struct usb_hcd *hcd) { int retval; - struct usb_hcd *hcd = priv_to_hcd(priv); - u32 command = isp1760_readl(hcd->regs + HC_USBCMD); + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + u32 command = reg_read32(hcd->regs, HC_USBCMD); command |= CMD_RESET; - isp1760_writel(command, hcd->regs + HC_USBCMD); + reg_write32(hcd->regs, HC_USBCMD, command); hcd->state = HC_STATE_HALT; priv->next_statechange = jiffies; - retval = handshake(priv, hcd->regs + HC_USBCMD, + retval = handshake(hcd, HC_USBCMD, CMD_RESET, 0, 250 * 1000); return retval; } @@ -324,8 +383,7 @@ static void qh_destroy(struct isp1760_qh *qh) kmem_cache_free(qh_cachep, qh); } -static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv, - gfp_t flags) +static struct isp1760_qh *isp1760_qh_alloc(gfp_t flags) { struct isp1760_qh *qh; @@ -334,7 +392,6 @@ static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv, return qh; INIT_LIST_HEAD(&qh->qtd_list); - qh->priv = priv; return qh; } @@ -361,7 +418,7 @@ static int priv_init(struct usb_hcd *hcd) priv->periodic_size = DEFAULT_I_TDPS; /* controllers may cache some of the periodic schedule ... */ - hcc_params = isp1760_readl(hcd->regs + HC_HCCPARAMS); + hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS); /* full frame cache */ if (HCC_ISOC_CACHE(hcc_params)) priv->i_thresh = 8; @@ -398,15 +455,15 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) * Write it twice to ensure correct upper bits if switching * to 16-bit mode. */ - isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); - isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG); + reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe); /* Change bus pattern */ - scratch = isp1760_readl(hcd->regs + HC_CHIP_ID_REG); - scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG); + scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG); + scratch = reg_read32(hcd->regs, HC_SCRATCH_REG); if (scratch != 0xdeadbabe) { - printk(KERN_ERR "ISP1760: Scratch test failed.\n"); + dev_err(hcd->self.controller, "Scratch test failed.\n"); return -ENODEV; } @@ -414,30 +471,30 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) isp1760_init_regs(hcd); /* reset */ - isp1760_writel(SW_RESET_RESET_ALL, hcd->regs + HC_RESET_REG); + reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_ALL); mdelay(100); - isp1760_writel(SW_RESET_RESET_HC, hcd->regs + HC_RESET_REG); + reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_HC); mdelay(100); - result = ehci_reset(priv); + result = ehci_reset(hcd); if (result) return result; /* Step 11 passed */ - isp1760_info(priv, "bus width: %d, oc: %s\n", + dev_info(hcd->self.controller, "bus width: %d, oc: %s\n", (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) ? 16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ? "analog" : "digital"); /* ATL reset */ - isp1760_writel(hwmode | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET); mdelay(10); - isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); - isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG); - isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE); + reg_write32(hcd->regs, HC_INTERRUPT_REG, INTERRUPT_ENABLE_MASK); + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK); /* * PORT 1 Control register of the ISP1760 is the OTG control @@ -445,11 +502,10 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) * support in this driver, we use port 1 as a "normal" USB host port on * both chips. */ - isp1760_writel(PORT1_POWER | PORT1_INIT2, - hcd->regs + HC_PORT1_CTRL); + reg_write32(hcd->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2); mdelay(10); - priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS); + priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS); return priv_init(hcd); } @@ -457,25 +513,24 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) static void isp1760_init_maps(struct usb_hcd *hcd) { /*set last maps, for iso its only 1, else 32 tds bitmap*/ - isp1760_writel(0x80000000, hcd->regs + HC_ATL_PTD_LASTPTD_REG); - isp1760_writel(0x80000000, hcd->regs + HC_INT_PTD_LASTPTD_REG); - isp1760_writel(0x00000001, hcd->regs + HC_ISO_PTD_LASTPTD_REG); + reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); } static void isp1760_enable_interrupts(struct usb_hcd *hcd) { - isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_AND_REG); - isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_OR_REG); - isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_AND_REG); - isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_OR_REG); - isp1760_writel(0, hcd->regs + HC_ISO_IRQ_MASK_AND_REG); - isp1760_writel(0xffffffff, hcd->regs + HC_ISO_IRQ_MASK_OR_REG); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); /* step 23 passed */ } static int isp1760_run(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(hcd); int retval; u32 temp; u32 command; @@ -485,15 +540,15 @@ static int isp1760_run(struct usb_hcd *hcd) hcd->state = HC_STATE_RUNNING; isp1760_enable_interrupts(hcd); - temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(temp | HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL); + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); - command = isp1760_readl(hcd->regs + HC_USBCMD); + command = reg_read32(hcd->regs, HC_USBCMD); command &= ~(CMD_LRESET|CMD_RESET); command |= CMD_RUN; - isp1760_writel(command, hcd->regs + HC_USBCMD); + reg_write32(hcd->regs, HC_USBCMD, command); - retval = handshake(priv, hcd->regs + HC_USBCMD, CMD_RUN, CMD_RUN, + retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); if (retval) return retval; @@ -504,17 +559,16 @@ static int isp1760_run(struct usb_hcd *hcd) * the semaphore while doing so. */ down_write(&ehci_cf_port_reset_rwsem); - isp1760_writel(FLAG_CF, hcd->regs + HC_CONFIGFLAG); + reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); - retval = handshake(priv, hcd->regs + HC_CONFIGFLAG, FLAG_CF, FLAG_CF, - 250 * 1000); + retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); up_write(&ehci_cf_port_reset_rwsem); if (retval) return retval; - chipid = isp1760_readl(hcd->regs + HC_CHIP_ID_REG); - isp1760_info(priv, "USB ISP %04x HW rev. %d started\n", chipid & 0xffff, - chipid >> 16); + chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); + dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", + chipid & 0xffff, chipid >> 16); /* PTD Register Init Part 2, Step 28 */ /* enable INTs */ @@ -532,160 +586,156 @@ static u32 base_to_chip(u32 base) return ((base - 0x400) >> 3); } -static void transform_into_atl(struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct urb *urb, - u32 payload, struct ptd *ptd) +static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh) +{ + struct urb *urb; + + if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) + return 1; + + urb = qtd->urb; + qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list); + return (qtd->urb != urb); +} + +static void transform_into_atl(struct isp1760_qh *qh, + struct isp1760_qtd *qtd, struct ptd *ptd) { - u32 dw0; - u32 dw1; - u32 dw2; - u32 dw3; u32 maxpacket; u32 multi; u32 pid_code; u32 rl = RL_COUNTER; u32 nak = NAK_COUNTER; + memset(ptd, 0, sizeof(*ptd)); + /* according to 3.6.2, max packet len can not be > 0x400 */ - maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); + maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe, + usb_pipeout(qtd->urb->pipe)); multi = 1 + ((maxpacket >> 11) & 0x3); maxpacket &= 0x7ff; /* DW0 */ - dw0 = PTD_VALID; - dw0 |= PTD_LENGTH(qtd->length); - dw0 |= PTD_MAXPACKET(maxpacket); - dw0 |= PTD_ENDPOINT(usb_pipeendpoint(urb->pipe)); - dw1 = usb_pipeendpoint(urb->pipe) >> 1; + ptd->dw0 = PTD_VALID; + ptd->dw0 |= PTD_LENGTH(qtd->length); + ptd->dw0 |= PTD_MAXPACKET(maxpacket); + ptd->dw0 |= PTD_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe)); /* DW1 */ - dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(urb->pipe)); + ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1; + ptd->dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe)); pid_code = qtd->packet_type; - dw1 |= PTD_PID_TOKEN(pid_code); + ptd->dw1 |= PTD_PID_TOKEN(pid_code); - if (usb_pipebulk(urb->pipe)) - dw1 |= PTD_TRANS_BULK; - else if (usb_pipeint(urb->pipe)) - dw1 |= PTD_TRANS_INT; + if (usb_pipebulk(qtd->urb->pipe)) + ptd->dw1 |= PTD_TRANS_BULK; + else if (usb_pipeint(qtd->urb->pipe)) + ptd->dw1 |= PTD_TRANS_INT; - if (urb->dev->speed != USB_SPEED_HIGH) { + if (qtd->urb->dev->speed != USB_SPEED_HIGH) { /* split transaction */ - dw1 |= PTD_TRANS_SPLIT; - if (urb->dev->speed == USB_SPEED_LOW) - dw1 |= PTD_SE_USB_LOSPEED; + ptd->dw1 |= PTD_TRANS_SPLIT; + if (qtd->urb->dev->speed == USB_SPEED_LOW) + ptd->dw1 |= PTD_SE_USB_LOSPEED; - dw1 |= PTD_PORT_NUM(urb->dev->ttport); - dw1 |= PTD_HUB_NUM(urb->dev->tt->hub->devnum); + ptd->dw1 |= PTD_PORT_NUM(qtd->urb->dev->ttport); + ptd->dw1 |= PTD_HUB_NUM(qtd->urb->dev->tt->hub->devnum); /* SE bit for Split INT transfers */ - if (usb_pipeint(urb->pipe) && - (urb->dev->speed == USB_SPEED_LOW)) - dw1 |= 2 << 16; + if (usb_pipeint(qtd->urb->pipe) && + (qtd->urb->dev->speed == USB_SPEED_LOW)) + ptd->dw1 |= 2 << 16; - dw3 = 0; + ptd->dw3 = 0; rl = 0; nak = 0; } else { - dw0 |= PTD_MULTI(multi); - if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) - dw3 = qh->ping; + ptd->dw0 |= PTD_MULTI(multi); + if (usb_pipecontrol(qtd->urb->pipe) || + usb_pipebulk(qtd->urb->pipe)) + ptd->dw3 = qh->ping; else - dw3 = 0; + ptd->dw3 = 0; } /* DW2 */ - dw2 = 0; - dw2 |= PTD_DATA_START_ADDR(base_to_chip(payload)); - dw2 |= PTD_RL_CNT(rl); - dw3 |= PTD_NAC_CNT(nak); + ptd->dw2 = 0; + ptd->dw2 |= PTD_DATA_START_ADDR(base_to_chip(qtd->payload_addr)); + ptd->dw2 |= PTD_RL_CNT(rl); + ptd->dw3 |= PTD_NAC_CNT(nak); /* DW3 */ - if (usb_pipecontrol(urb->pipe)) - dw3 |= PTD_DATA_TOGGLE(qtd->toggle); - else - dw3 |= qh->toggle; - + ptd->dw3 |= qh->toggle; + if (usb_pipecontrol(qtd->urb->pipe)) { + if (qtd->data_buffer == qtd->urb->setup_packet) + ptd->dw3 &= ~PTD_DATA_TOGGLE(1); + else if (last_qtd_of_urb(qtd, qh)) + ptd->dw3 |= PTD_DATA_TOGGLE(1); + } - dw3 |= PTD_ACTIVE; + ptd->dw3 |= PTD_ACTIVE; /* Cerr */ - dw3 |= PTD_CERR(ERR_COUNTER); - - memset(ptd, 0, sizeof(*ptd)); - - ptd->dw0 = cpu_to_le32(dw0); - ptd->dw1 = cpu_to_le32(dw1); - ptd->dw2 = cpu_to_le32(dw2); - ptd->dw3 = cpu_to_le32(dw3); + ptd->dw3 |= PTD_CERR(ERR_COUNTER); } -static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct urb *urb, - u32 payload, struct ptd *ptd) +static void transform_add_int(struct isp1760_qh *qh, + struct isp1760_qtd *qtd, struct ptd *ptd) { - u32 maxpacket; - u32 multi; - u32 numberofusofs; - u32 i; - u32 usofmask, usof; + u32 usof; u32 period; - maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - multi = 1 + ((maxpacket >> 11) & 0x3); - maxpacket &= 0x7ff; - /* length of the data per uframe */ - maxpacket = multi * maxpacket; - - numberofusofs = urb->transfer_buffer_length / maxpacket; - if (urb->transfer_buffer_length % maxpacket) - numberofusofs += 1; - - usofmask = 1; - usof = 0; - for (i = 0; i < numberofusofs; i++) { - usof |= usofmask; - usofmask <<= 1; - } - - if (urb->dev->speed != USB_SPEED_HIGH) { - /* split */ - ptd->dw5 = cpu_to_le32(0x1c); + /* + * Most of this is guessing. ISP1761 datasheet is quite unclear, and + * the algorithm from the original Philips driver code, which was + * pretty much used in this driver before as well, is quite horrendous + * and, i believe, incorrect. The code below follows the datasheet and + * USB2.0 spec as far as I can tell, and plug/unplug seems to be much + * more reliable this way (fingers crossed...). + */ - if (qh->period >= 32) - period = qh->period / 2; + if (qtd->urb->dev->speed == USB_SPEED_HIGH) { + /* urb->interval is in units of microframes (1/8 ms) */ + period = qtd->urb->interval >> 3; + + if (qtd->urb->interval > 4) + usof = 0x01; /* One bit set => + interval 1 ms * uFrame-match */ + else if (qtd->urb->interval > 2) + usof = 0x22; /* Two bits set => interval 1/2 ms */ + else if (qtd->urb->interval > 1) + usof = 0x55; /* Four bits set => interval 1/4 ms */ else - period = qh->period; - + usof = 0xff; /* All bits set => interval 1/8 ms */ } else { + /* urb->interval is in units of frames (1 ms) */ + period = qtd->urb->interval; + usof = 0x0f; /* Execute Start Split on any of the + four first uFrames */ - if (qh->period >= 8) - period = qh->period/8; - else - period = qh->period; - - if (period >= 32) - period = 16; - - if (qh->period >= 8) { - /* millisecond period */ - period = (period << 3); - } else { - /* usof based tranmsfers */ - /* minimum 4 usofs */ - usof = 0x11; - } + /* + * First 8 bits in dw5 is uSCS and "specifies which uSOF the + * complete split needs to be sent. Valid only for IN." Also, + * "All bits can be set to one for every transfer." (p 82, + * ISP1761 data sheet.) 0x1c is from Philips driver. Where did + * that number come from? 0xff seems to work fine... + */ + /* ptd->dw5 = 0x1c; */ + ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */ } - ptd->dw2 |= cpu_to_le32(period); - ptd->dw4 = cpu_to_le32(usof); + period = period >> 1;/* Ensure equal or shorter period than requested */ + period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */ + + ptd->dw2 |= period; + ptd->dw4 = usof; } -static void transform_into_int(struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct urb *urb, - u32 payload, struct ptd *ptd) +static void transform_into_int(struct isp1760_qh *qh, + struct isp1760_qtd *qtd, struct ptd *ptd) { - transform_into_atl(priv, qh, qtd, urb, payload, ptd); - transform_add_int(priv, qh, qtd, urb, payload, ptd); + transform_into_atl(qh, qtd, ptd); + transform_add_int(qh, qtd, ptd); } static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len, @@ -695,10 +745,9 @@ static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len, qtd->data_buffer = databuffer; qtd->packet_type = GET_QTD_TOKEN_TYPE(token); - qtd->toggle = GET_DATA_TOGGLE(token); - if (len > HC_ATL_PL_SIZE) - count = HC_ATL_PL_SIZE; + if (len > MAX_PAYLOAD_SIZE) + count = MAX_PAYLOAD_SIZE; else count = len; @@ -706,29 +755,27 @@ static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len, return count; } -static int check_error(struct ptd *ptd) +static int check_error(struct usb_hcd *hcd, struct ptd *ptd) { int error = 0; - u32 dw3; - dw3 = le32_to_cpu(ptd->dw3); - if (dw3 & DW3_HALT_BIT) { + if (ptd->dw3 & DW3_HALT_BIT) { error = -EPIPE; - if (dw3 & DW3_ERROR_BIT) + if (ptd->dw3 & DW3_ERROR_BIT) pr_err("error bit is set in DW3\n"); } - if (dw3 & DW3_QTD_ACTIVE) { - printk(KERN_ERR "transfer active bit is set DW3\n"); - printk(KERN_ERR "nak counter: %d, rl: %d\n", (dw3 >> 19) & 0xf, - (le32_to_cpu(ptd->dw2) >> 25) & 0xf); + if (ptd->dw3 & DW3_QTD_ACTIVE) { + dev_err(hcd->self.controller, "Transfer active bit is set DW3\n" + "nak counter: %d, rl: %d\n", + (ptd->dw3 >> 19) & 0xf, (ptd->dw2 >> 25) & 0xf); } return error; } -static void check_int_err_status(u32 dw4) +static void check_int_err_status(struct usb_hcd *hcd, u32 dw4) { u32 i; @@ -737,79 +784,67 @@ static void check_int_err_status(u32 dw4) for (i = 0; i < 8; i++) { switch (dw4 & 0x7) { case INT_UNDERRUN: - printk(KERN_ERR "ERROR: under run , %d\n", i); + dev_err(hcd->self.controller, "Underrun (%d)\n", i); break; case INT_EXACT: - printk(KERN_ERR "ERROR: transaction error, %d\n", i); + dev_err(hcd->self.controller, + "Transaction error (%d)\n", i); break; case INT_BABBLE: - printk(KERN_ERR "ERROR: babble error, %d\n", i); + dev_err(hcd->self.controller, "Babble error (%d)\n", i); break; } dw4 >>= 3; } } -static void enqueue_one_qtd(struct isp1760_qtd *qtd, struct isp1760_hcd *priv, - u32 payload) +static void enqueue_one_qtd(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { - u32 token; - struct usb_hcd *hcd = priv_to_hcd(priv); - - token = qtd->packet_type; - - if (qtd->length && (qtd->length <= HC_ATL_PL_SIZE)) { - switch (token) { + if (qtd->length && (qtd->length <= MAX_PAYLOAD_SIZE)) { + switch (qtd->packet_type) { case IN_PID: break; case OUT_PID: case SETUP_PID: - priv_write_copy(priv, qtd->data_buffer, - hcd->regs + payload, - qtd->length); + mem_writes8(hcd->regs, qtd->payload_addr, + qtd->data_buffer, qtd->length); } } } -static void enqueue_one_atl_qtd(u32 atl_regs, u32 payload, - struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct urb *urb, u32 slot, struct isp1760_qtd *qtd) +static void enqueue_one_atl_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, + u32 slot, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct ptd ptd; - struct usb_hcd *hcd = priv_to_hcd(priv); - transform_into_atl(priv, qh, qtd, urb, payload, &ptd); - priv_write_copy(priv, (u32 *)&ptd, hcd->regs + atl_regs, sizeof(ptd)); - enqueue_one_qtd(qtd, priv, payload); + alloc_mem(hcd, qtd); + transform_into_atl(qh, qtd, &ptd); + ptd_write(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); + enqueue_one_qtd(hcd, qtd); - priv->atl_ints[slot].urb = urb; priv->atl_ints[slot].qh = qh; priv->atl_ints[slot].qtd = qtd; - priv->atl_ints[slot].data_buffer = qtd->data_buffer; - priv->atl_ints[slot].payload = payload; - qtd->status |= URB_ENQUEUED | URB_TYPE_ATL; + qtd->status |= URB_ENQUEUED; qtd->status |= slot << 16; } -static void enqueue_one_int_qtd(u32 int_regs, u32 payload, - struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct urb *urb, u32 slot, struct isp1760_qtd *qtd) +static void enqueue_one_int_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, + u32 slot, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct ptd ptd; - struct usb_hcd *hcd = priv_to_hcd(priv); - transform_into_int(priv, qh, qtd, urb, payload, &ptd); - priv_write_copy(priv, (u32 *)&ptd, hcd->regs + int_regs, sizeof(ptd)); - enqueue_one_qtd(qtd, priv, payload); + alloc_mem(hcd, qtd); + transform_into_int(qh, qtd, &ptd); + ptd_write(hcd->regs, INT_PTD_OFFSET, slot, &ptd); + enqueue_one_qtd(hcd, qtd); - priv->int_ints[slot].urb = urb; priv->int_ints[slot].qh = qh; priv->int_ints[slot].qtd = qtd; - priv->int_ints[slot].data_buffer = qtd->data_buffer; - priv->int_ints[slot].payload = payload; - qtd->status |= URB_ENQUEUED | URB_TYPE_INT; + qtd->status |= URB_ENQUEUED; qtd->status |= slot << 16; } @@ -818,9 +853,7 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, { struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 skip_map, or_map; - u32 queue_entry; u32 slot; - u32 atl_regs, payload; u32 buffstatus; /* @@ -831,38 +864,35 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, */ mmiowb(); ndelay(195); - skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); BUG_ON(!skip_map); slot = __ffs(skip_map); - queue_entry = 1 << slot; - - atl_regs = ATL_REGS_OFFSET + slot * sizeof(struct ptd); - payload = alloc_mem(priv, qtd->length); + enqueue_one_atl_qtd(hcd, qh, slot, qtd); - enqueue_one_atl_qtd(atl_regs, payload, priv, qh, qtd->urb, slot, qtd); + or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG); + or_map |= (1 << slot); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map); - or_map = isp1760_readl(hcd->regs + HC_ATL_IRQ_MASK_OR_REG); - or_map |= queue_entry; - isp1760_writel(or_map, hcd->regs + HC_ATL_IRQ_MASK_OR_REG); + skip_map &= ~(1 << slot); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); - skip_map &= ~queue_entry; - isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG); + priv->atl_queued++; + if (priv->atl_queued == 2) + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, + INTERRUPT_ENABLE_SOT_MASK); - buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG); + buffstatus = reg_read32(hcd->regs, HC_BUFFER_STATUS_REG); buffstatus |= ATL_BUFFER; - isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, buffstatus); } static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, struct isp1760_qtd *qtd) { - struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 skip_map, or_map; - u32 queue_entry; u32 slot; - u32 int_regs, payload; u32 buffstatus; /* @@ -873,37 +903,34 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, */ mmiowb(); ndelay(195); - skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); BUG_ON(!skip_map); slot = __ffs(skip_map); - queue_entry = 1 << slot; - - int_regs = INT_REGS_OFFSET + slot * sizeof(struct ptd); - payload = alloc_mem(priv, qtd->length); + enqueue_one_int_qtd(hcd, qh, slot, qtd); - enqueue_one_int_qtd(int_regs, payload, priv, qh, qtd->urb, slot, qtd); + or_map = reg_read32(hcd->regs, HC_INT_IRQ_MASK_OR_REG); + or_map |= (1 << slot); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, or_map); - or_map = isp1760_readl(hcd->regs + HC_INT_IRQ_MASK_OR_REG); - or_map |= queue_entry; - isp1760_writel(or_map, hcd->regs + HC_INT_IRQ_MASK_OR_REG); + skip_map &= ~(1 << slot); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); - skip_map &= ~queue_entry; - isp1760_writel(skip_map, hcd->regs + HC_INT_PTD_SKIPMAP_REG); - - buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG); + buffstatus = reg_read32(hcd->regs, HC_BUFFER_STATUS_REG); buffstatus |= INT_BUFFER; - isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, buffstatus); } -static void isp1760_urb_done(struct isp1760_hcd *priv, struct urb *urb, int status) +static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb) __releases(priv->lock) __acquires(priv->lock) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); + if (!urb->unlinked) { - if (status == -EINPROGRESS) - status = 0; + if (urb->status == -EINPROGRESS) + urb->status = 0; } if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { @@ -915,22 +942,28 @@ __acquires(priv->lock) } /* complete() can reenter this HCD */ - usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); + usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock(&priv->lock); - usb_hcd_giveback_urb(priv_to_hcd(priv), urb, status); + usb_hcd_giveback_urb(hcd, urb, urb->status); spin_lock(&priv->lock); } static void isp1760_qtd_free(struct isp1760_qtd *qtd) { + BUG_ON(qtd->payload_addr); kmem_cache_free(qtd_cachep, qtd); } -static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd) +static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd, + struct isp1760_qh *qh) { struct isp1760_qtd *tmp_qtd; - tmp_qtd = qtd->hw_next; + if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) + tmp_qtd = NULL; + else + tmp_qtd = list_entry(qtd->qtd_list.next, struct isp1760_qtd, + qtd_list); list_del(&qtd->qtd_list); isp1760_qtd_free(qtd); return tmp_qtd; @@ -941,32 +974,26 @@ static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd) * isn't the last one than remove also his successor(s). * Returns the QTD which is part of an new URB and should be enqueued. */ -static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd) +static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd, + struct isp1760_qh *qh) { - struct isp1760_qtd *tmp_qtd; - int last_one; + struct urb *urb; + urb = qtd->urb; do { - tmp_qtd = qtd->hw_next; - last_one = qtd->status & URB_COMPLETE_NOTIFY; - list_del(&qtd->qtd_list); - isp1760_qtd_free(qtd); - qtd = tmp_qtd; - } while (!last_one && qtd); + qtd = clean_this_qtd(qtd, qh); + } while (qtd && (qtd->urb == urb)); return qtd; } -static void do_atl_int(struct usb_hcd *usb_hcd) +static void do_atl_int(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 done_map, skip_map; struct ptd ptd; - struct urb *urb = NULL; - u32 atl_regs_base; - u32 atl_regs; - u32 queue_entry; - u32 payload; + struct urb *urb; + u32 slot; u32 length; u32 or_map; u32 status = -EINVAL; @@ -976,62 +1003,36 @@ static void do_atl_int(struct usb_hcd *usb_hcd) u32 rl; u32 nakcount; - done_map = isp1760_readl(usb_hcd->regs + - HC_ATL_PTD_DONEMAP_REG); - skip_map = isp1760_readl(usb_hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); + done_map = reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); - or_map = isp1760_readl(usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG); + or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG); or_map &= ~done_map; - isp1760_writel(or_map, usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map); - atl_regs_base = ATL_REGS_OFFSET; while (done_map) { - u32 dw1; - u32 dw2; - u32 dw3; - status = 0; + priv->atl_queued--; - queue_entry = __ffs(done_map); - done_map &= ~(1 << queue_entry); - skip_map |= 1 << queue_entry; - - atl_regs = atl_regs_base + queue_entry * sizeof(struct ptd); + slot = __ffs(done_map); + done_map &= ~(1 << slot); + skip_map |= (1 << slot); - urb = priv->atl_ints[queue_entry].urb; - qtd = priv->atl_ints[queue_entry].qtd; - qh = priv->atl_ints[queue_entry].qh; - payload = priv->atl_ints[queue_entry].payload; + qtd = priv->atl_ints[slot].qtd; + qh = priv->atl_ints[slot].qh; if (!qh) { - printk(KERN_ERR "qh is 0\n"); + dev_err(hcd->self.controller, "qh is 0\n"); continue; } - isp1760_writel(atl_regs + ISP_BANK(0), usb_hcd->regs + - HC_MEMORY_REG); - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); - /* - * write bank1 address twice to ensure the 90ns delay (time - * between BANK0 write and the priv_read_copy() call is at - * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns) - */ - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); + ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); - priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs + - ISP_BANK(0), sizeof(ptd)); - - dw1 = le32_to_cpu(ptd.dw1); - dw2 = le32_to_cpu(ptd.dw2); - dw3 = le32_to_cpu(ptd.dw3); - rl = (dw2 >> 25) & 0x0f; - nakcount = (dw3 >> 19) & 0xf; + rl = (ptd.dw2 >> 25) & 0x0f; + nakcount = (ptd.dw3 >> 19) & 0xf; /* Transfer Error, *but* active and no HALT -> reload */ - if ((dw3 & DW3_ERROR_BIT) && (dw3 & DW3_QTD_ACTIVE) && - !(dw3 & DW3_HALT_BIT)) { + if ((ptd.dw3 & DW3_ERROR_BIT) && (ptd.dw3 & DW3_QTD_ACTIVE) && + !(ptd.dw3 & DW3_HALT_BIT)) { /* according to ppriv code, we have to * reload this one if trasfered bytes != requested bytes @@ -1040,13 +1041,14 @@ static void do_atl_int(struct usb_hcd *usb_hcd) * triggered so far. */ - length = PTD_XFERRED_LENGTH(dw3); - printk(KERN_ERR "Should reload now.... transfered %d " + length = PTD_XFERRED_LENGTH(ptd.dw3); + dev_err(hcd->self.controller, + "Should reload now... transferred %d " "of %zu\n", length, qtd->length); BUG(); } - if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) { + if (!nakcount && (ptd.dw3 & DW3_QTD_ACTIVE)) { u32 buffstatus; /* @@ -1054,52 +1056,45 @@ static void do_atl_int(struct usb_hcd *usb_hcd) * device is not able to send data fast enough. * This happens mostly on slower hardware. */ - printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: " - "%d of %zu done: %08x cur: %08x\n", qtd, - urb, qh, PTD_XFERRED_LENGTH(dw3), - qtd->length, done_map, - (1 << queue_entry)); /* RL counter = ERR counter */ - dw3 &= ~(0xf << 19); - dw3 |= rl << 19; - dw3 &= ~(3 << (55 - 32)); - dw3 |= ERR_COUNTER << (55 - 32); + ptd.dw3 &= ~(0xf << 19); + ptd.dw3 |= rl << 19; + ptd.dw3 &= ~(3 << (55 - 32)); + ptd.dw3 |= ERR_COUNTER << (55 - 32); /* * It is not needed to write skip map back because it * is unchanged. Just make sure that this entry is * unskipped once it gets written to the HW. */ - skip_map &= ~(1 << queue_entry); - or_map = isp1760_readl(usb_hcd->regs + - HC_ATL_IRQ_MASK_OR_REG); - or_map |= 1 << queue_entry; - isp1760_writel(or_map, usb_hcd->regs + - HC_ATL_IRQ_MASK_OR_REG); - - ptd.dw3 = cpu_to_le32(dw3); - priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + - atl_regs, sizeof(ptd)); - - ptd.dw0 |= cpu_to_le32(PTD_VALID); - priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + - atl_regs, sizeof(ptd)); - - buffstatus = isp1760_readl(usb_hcd->regs + - HC_BUFFER_STATUS_REG); + skip_map &= ~(1 << slot); + or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG); + or_map |= 1 << slot; + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map); + + ptd.dw0 |= PTD_VALID; + ptd_write(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); + + priv->atl_queued++; + if (priv->atl_queued == 2) + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, + INTERRUPT_ENABLE_SOT_MASK); + + buffstatus = reg_read32(hcd->regs, + HC_BUFFER_STATUS_REG); buffstatus |= ATL_BUFFER; - isp1760_writel(buffstatus, usb_hcd->regs + - HC_BUFFER_STATUS_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, + buffstatus); continue; } - error = check_error(&ptd); + error = check_error(hcd, &ptd); if (error) { status = error; - priv->atl_ints[queue_entry].qh->toggle = 0; - priv->atl_ints[queue_entry].qh->ping = 0; - urb->status = -EPIPE; + priv->atl_ints[slot].qh->toggle = 0; + priv->atl_ints[slot].qh->ping = 0; + qtd->urb->status = -EPIPE; #if 0 printk(KERN_ERR "Error in %s().\n", __func__); @@ -1110,154 +1105,123 @@ static void do_atl_int(struct usb_hcd *usb_hcd) ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7); #endif } else { - if (usb_pipetype(urb->pipe) == PIPE_BULK) { - priv->atl_ints[queue_entry].qh->toggle = dw3 & - (1 << 25); - priv->atl_ints[queue_entry].qh->ping = dw3 & - (1 << 26); - } + priv->atl_ints[slot].qh->toggle = ptd.dw3 & (1 << 25); + priv->atl_ints[slot].qh->ping = ptd.dw3 & (1 << 26); } - length = PTD_XFERRED_LENGTH(dw3); + length = PTD_XFERRED_LENGTH(ptd.dw3); if (length) { - switch (DW1_GET_PID(dw1)) { + switch (DW1_GET_PID(ptd.dw1)) { case IN_PID: - priv_read_copy(priv, - priv->atl_ints[queue_entry].data_buffer, - usb_hcd->regs + payload + ISP_BANK(1), - length); + mem_reads8(hcd->regs, qtd->payload_addr, + qtd->data_buffer, length); case OUT_PID: - urb->actual_length += length; + qtd->urb->actual_length += length; case SETUP_PID: break; } } - priv->atl_ints[queue_entry].data_buffer = NULL; - priv->atl_ints[queue_entry].urb = NULL; - priv->atl_ints[queue_entry].qtd = NULL; - priv->atl_ints[queue_entry].qh = NULL; + priv->atl_ints[slot].qtd = NULL; + priv->atl_ints[slot].qh = NULL; - free_mem(priv, payload); + free_mem(hcd, qtd); - isp1760_writel(skip_map, usb_hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); - if (urb->status == -EPIPE) { + if (qtd->urb->status == -EPIPE) { /* HALT was received */ - qtd = clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); - } else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) { + } else if (usb_pipebulk(qtd->urb->pipe) && + (length < qtd->length)) { /* short BULK received */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - urb->status = -EREMOTEIO; - isp1760_dbg(priv, "short bulk, %d instead %zu " - "with URB_SHORT_NOT_OK flag.\n", - length, qtd->length); + if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK) { + qtd->urb->status = -EREMOTEIO; + dev_dbg(hcd->self.controller, + "short bulk, %d instead %zu " + "with URB_SHORT_NOT_OK flag.\n", + length, qtd->length); } - if (urb->status == -EINPROGRESS) - urb->status = 0; - - qtd = clean_up_qtdlist(qtd); + if (qtd->urb->status == -EINPROGRESS) + qtd->urb->status = 0; - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); - } else if (qtd->status & URB_COMPLETE_NOTIFY) { + } else if (last_qtd_of_urb(qtd, qh)) { /* that was the last qtd of that URB */ - if (urb->status == -EINPROGRESS) - urb->status = 0; + if (qtd->urb->status == -EINPROGRESS) + qtd->urb->status = 0; - qtd = clean_this_qtd(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); } else { /* next QTD of this URB */ - qtd = clean_this_qtd(qtd); + qtd = clean_this_qtd(qtd, qh); BUG_ON(!qtd); } if (qtd) - enqueue_an_ATL_packet(usb_hcd, qh, qtd); + enqueue_an_ATL_packet(hcd, qh, qtd); - skip_map = isp1760_readl(usb_hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); } + if (priv->atl_queued <= 1) + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, + INTERRUPT_ENABLE_MASK); } -static void do_intl_int(struct usb_hcd *usb_hcd) +static void do_intl_int(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 done_map, skip_map; struct ptd ptd; - struct urb *urb = NULL; - u32 int_regs; - u32 int_regs_base; - u32 payload; + struct urb *urb; u32 length; u32 or_map; int error; - u32 queue_entry; + u32 slot; struct isp1760_qtd *qtd; struct isp1760_qh *qh; - done_map = isp1760_readl(usb_hcd->regs + - HC_INT_PTD_DONEMAP_REG); - skip_map = isp1760_readl(usb_hcd->regs + - HC_INT_PTD_SKIPMAP_REG); + done_map = reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG); + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); - or_map = isp1760_readl(usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG); + or_map = reg_read32(hcd->regs, HC_INT_IRQ_MASK_OR_REG); or_map &= ~done_map; - isp1760_writel(or_map, usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG); - - int_regs_base = INT_REGS_OFFSET; + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, or_map); while (done_map) { - u32 dw1; - u32 dw3; + slot = __ffs(done_map); + done_map &= ~(1 << slot); + skip_map |= (1 << slot); - queue_entry = __ffs(done_map); - done_map &= ~(1 << queue_entry); - skip_map |= 1 << queue_entry; - - int_regs = int_regs_base + queue_entry * sizeof(struct ptd); - urb = priv->int_ints[queue_entry].urb; - qtd = priv->int_ints[queue_entry].qtd; - qh = priv->int_ints[queue_entry].qh; - payload = priv->int_ints[queue_entry].payload; + qtd = priv->int_ints[slot].qtd; + qh = priv->int_ints[slot].qh; if (!qh) { - printk(KERN_ERR "(INT) qh is 0\n"); + dev_err(hcd->self.controller, "(INT) qh is 0\n"); continue; } - isp1760_writel(int_regs + ISP_BANK(0), usb_hcd->regs + - HC_MEMORY_REG); - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); - /* - * write bank1 address twice to ensure the 90ns delay (time - * between BANK0 write and the priv_read_copy() call is at - * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns) - */ - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); + ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd); + check_int_err_status(hcd, ptd.dw4); - priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs + - ISP_BANK(0), sizeof(ptd)); - dw1 = le32_to_cpu(ptd.dw1); - dw3 = le32_to_cpu(ptd.dw3); - check_int_err_status(le32_to_cpu(ptd.dw4)); - - error = check_error(&ptd); + error = check_error(hcd, &ptd); if (error) { #if 0 printk(KERN_ERR "Error in %s().\n", __func__); @@ -1267,83 +1231,77 @@ static void do_intl_int(struct usb_hcd *usb_hcd) ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3, ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7); #endif - urb->status = -EPIPE; - priv->int_ints[queue_entry].qh->toggle = 0; - priv->int_ints[queue_entry].qh->ping = 0; + qtd->urb->status = -EPIPE; + priv->int_ints[slot].qh->toggle = 0; + priv->int_ints[slot].qh->ping = 0; } else { - priv->int_ints[queue_entry].qh->toggle = - dw3 & (1 << 25); - priv->int_ints[queue_entry].qh->ping = dw3 & (1 << 26); + priv->int_ints[slot].qh->toggle = ptd.dw3 & (1 << 25); + priv->int_ints[slot].qh->ping = ptd.dw3 & (1 << 26); } - if (urb->dev->speed != USB_SPEED_HIGH) - length = PTD_XFERRED_LENGTH_LO(dw3); + if (qtd->urb->dev->speed != USB_SPEED_HIGH) + length = PTD_XFERRED_LENGTH_LO(ptd.dw3); else - length = PTD_XFERRED_LENGTH(dw3); + length = PTD_XFERRED_LENGTH(ptd.dw3); if (length) { - switch (DW1_GET_PID(dw1)) { + switch (DW1_GET_PID(ptd.dw1)) { case IN_PID: - priv_read_copy(priv, - priv->int_ints[queue_entry].data_buffer, - usb_hcd->regs + payload + ISP_BANK(1), - length); + mem_reads8(hcd->regs, qtd->payload_addr, + qtd->data_buffer, length); case OUT_PID: - urb->actual_length += length; + qtd->urb->actual_length += length; case SETUP_PID: break; } } - priv->int_ints[queue_entry].data_buffer = NULL; - priv->int_ints[queue_entry].urb = NULL; - priv->int_ints[queue_entry].qtd = NULL; - priv->int_ints[queue_entry].qh = NULL; + priv->int_ints[slot].qtd = NULL; + priv->int_ints[slot].qh = NULL; - isp1760_writel(skip_map, usb_hcd->regs + - HC_INT_PTD_SKIPMAP_REG); - free_mem(priv, payload); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); + free_mem(hcd, qtd); - if (urb->status == -EPIPE) { + if (qtd->urb->status == -EPIPE) { /* HALT received */ - qtd = clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); - } else if (qtd->status & URB_COMPLETE_NOTIFY) { + } else if (last_qtd_of_urb(qtd, qh)) { - if (urb->status == -EINPROGRESS) - urb->status = 0; + if (qtd->urb->status == -EINPROGRESS) + qtd->urb->status = 0; - qtd = clean_this_qtd(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); } else { /* next QTD of this URB */ - qtd = clean_this_qtd(qtd); + qtd = clean_this_qtd(qtd, qh); BUG_ON(!qtd); } if (qtd) - enqueue_an_INT_packet(usb_hcd, qh, qtd); + enqueue_an_INT_packet(hcd, qh, qtd); - skip_map = isp1760_readl(usb_hcd->regs + - HC_INT_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); } } -#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) -static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb, +static struct isp1760_qh *qh_make(struct usb_hcd *hcd, struct urb *urb, gfp_t flags) { struct isp1760_qh *qh; int is_input, type; - qh = isp1760_qh_alloc(priv, flags); + qh = isp1760_qh_alloc(flags); if (!qh) return qh; @@ -1353,29 +1311,6 @@ static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb, is_input = usb_pipein(urb->pipe); type = usb_pipetype(urb->pipe); - if (type == PIPE_INTERRUPT) { - - if (urb->dev->speed == USB_SPEED_HIGH) { - - qh->period = urb->interval >> 3; - if (qh->period == 0 && urb->interval != 1) { - /* NOTE interval 2 or 4 uframes could work. - * But interval 1 scheduling is simpler, and - * includes high bandwidth. - */ - printk(KERN_ERR "intr period %d uframes, NYET!", - urb->interval); - qh_destroy(qh); - return NULL; - } - } else { - qh->period = urb->interval; - } - } - - /* support for tt scheduling, and access to toggles */ - qh->dev = urb->dev; - if (!usb_pipecontrol(urb->pipe)) usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input, 1); @@ -1388,43 +1323,27 @@ static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb, * Returns null if it can't allocate a QH it needs to. * If the QH has TDs (urbs) already, that's great. */ -static struct isp1760_qh *qh_append_tds(struct isp1760_hcd *priv, +static struct isp1760_qh *qh_append_tds(struct usb_hcd *hcd, struct urb *urb, struct list_head *qtd_list, int epnum, void **ptr) { struct isp1760_qh *qh; - struct isp1760_qtd *qtd; - struct isp1760_qtd *prev_qtd; qh = (struct isp1760_qh *)*ptr; if (!qh) { /* can't sleep here, we have priv->lock... */ - qh = qh_make(priv, urb, GFP_ATOMIC); + qh = qh_make(hcd, urb, GFP_ATOMIC); if (!qh) return qh; *ptr = qh; } - qtd = list_entry(qtd_list->next, struct isp1760_qtd, - qtd_list); - if (!list_empty(&qh->qtd_list)) - prev_qtd = list_entry(qh->qtd_list.prev, - struct isp1760_qtd, qtd_list); - else - prev_qtd = NULL; - list_splice(qtd_list, qh->qtd_list.prev); - if (prev_qtd) { - BUG_ON(prev_qtd->hw_next); - prev_qtd->hw_next = qtd; - } - urb->hcpriv = qh; return qh; } -static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb, - struct list_head *qtd_list) +static void qtd_list_free(struct urb *urb, struct list_head *qtd_list) { struct list_head *entry, *temp; @@ -1437,9 +1356,10 @@ static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb, } } -static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, +static int isp1760_prepare_enqueue(struct usb_hcd *hcd, struct urb *urb, struct list_head *qtd_list, gfp_t mem_flags, packet_enqueue *p) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct isp1760_qtd *qtd; int epnum; unsigned long flags; @@ -1451,11 +1371,11 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, epnum = urb->ep->desc.bEndpointAddress; spin_lock_irqsave(&priv->lock, flags); - if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) { + if (!HCD_HW_ACCESSIBLE(hcd)) { rc = -ESHUTDOWN; goto done; } - rc = usb_hcd_link_urb_to_ep(priv_to_hcd(priv), urb); + rc = usb_hcd_link_urb_to_ep(hcd, urb); if (rc) goto done; @@ -1465,25 +1385,24 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, else qh_busy = 0; - qh = qh_append_tds(priv, urb, qtd_list, epnum, &urb->ep->hcpriv); + qh = qh_append_tds(hcd, urb, qtd_list, epnum, &urb->ep->hcpriv); if (!qh) { - usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); + usb_hcd_unlink_urb_from_ep(hcd, urb); rc = -ENOMEM; goto done; } if (!qh_busy) - p(priv_to_hcd(priv), qh, qtd); + p(hcd, qh, qtd); done: spin_unlock_irqrestore(&priv->lock, flags); if (!qh) - qtd_list_free(priv, urb, qtd_list); + qtd_list_free(urb, qtd_list); return rc; } -static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv, - gfp_t flags) +static struct isp1760_qtd *isp1760_qtd_alloc(gfp_t flags) { struct isp1760_qtd *qtd; @@ -1497,10 +1416,11 @@ static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv, /* * create a list of filled qtds for this URB; won't link into qh. */ -static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, +#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) +static struct list_head *qh_urb_transaction(struct usb_hcd *hcd, struct urb *urb, struct list_head *head, gfp_t flags) { - struct isp1760_qtd *qtd, *qtd_prev; + struct isp1760_qtd *qtd; void *buf; int len, maxpacket; int is_input; @@ -1509,7 +1429,7 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, /* * URBs map to sequences of QTDs: one logical transaction */ - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) return NULL; @@ -1529,13 +1449,10 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, token | SETUP_PID); /* ... and always at least one more pid */ - token ^= DATA_TOGGLE; - qtd_prev = qtd; - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) goto cleanup; qtd->urb = urb; - qtd_prev->hw_next = qtd; list_add_tail(&qtd->qtd_list, head); /* for zero length DATA stages, STATUS is always IN */ @@ -1565,7 +1482,7 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, if (!buf && len) { /* XXX This looks like usb storage / SCSI bug */ - printk(KERN_ERR "buf is null, dma is %08lx len is %d\n", + dev_err(hcd->self.controller, "buf is null, dma is %08lx len is %d\n", (long unsigned)urb->transfer_dma, len); WARN_ON(1); } @@ -1574,19 +1491,13 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, len -= this_qtd_len; buf += this_qtd_len; - /* qh makes control packets use qtd toggle; maybe switch it */ - if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0) - token ^= DATA_TOGGLE; - if (len <= 0) break; - qtd_prev = qtd; - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) goto cleanup; qtd->urb = urb; - qtd_prev->hw_next = qtd; list_add_tail(&qtd->qtd_list, head); } @@ -1601,20 +1512,16 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, one_more = 1; /* "in" <--> "out" */ token ^= IN_PID; - /* force DATA1 */ - token |= DATA_TOGGLE; } else if (usb_pipebulk(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) && !(urb->transfer_buffer_length % maxpacket)) { one_more = 1; } if (one_more) { - qtd_prev = qtd; - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) goto cleanup; qtd->urb = urb; - qtd_prev->hw_next = qtd; list_add_tail(&qtd->qtd_list, head); /* never any data in such packets */ @@ -1622,18 +1529,17 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, } } - qtd->status = URB_COMPLETE_NOTIFY; + qtd->status = 0; return head; cleanup: - qtd_list_free(priv, urb, head); + qtd_list_free(urb, head); return NULL; } static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { - struct isp1760_hcd *priv = hcd_to_priv(hcd); struct list_head qtd_list; packet_enqueue *pe; @@ -1642,29 +1548,27 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, switch (usb_pipetype(urb->pipe)) { case PIPE_CONTROL: case PIPE_BULK: - - if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags)) + if (!qh_urb_transaction(hcd, urb, &qtd_list, mem_flags)) return -ENOMEM; pe = enqueue_an_ATL_packet; break; case PIPE_INTERRUPT: - if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags)) + if (!qh_urb_transaction(hcd, urb, &qtd_list, mem_flags)) return -ENOMEM; pe = enqueue_an_INT_packet; break; case PIPE_ISOCHRONOUS: - printk(KERN_ERR "PIPE_ISOCHRONOUS ain't supported\n"); + dev_err(hcd->self.controller, "PIPE_ISOCHRONOUS ain't supported\n"); default: return -EPIPE; } - return isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe); + return isp1760_prepare_enqueue(hcd, urb, &qtd_list, mem_flags, pe); } -static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, - int status) +static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { struct isp1760_hcd *priv = hcd_to_priv(hcd); struct inter_packet_info *ints; @@ -1681,7 +1585,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, case PIPE_INTERRUPT: ints = priv->int_ints; - reg_base = INT_REGS_OFFSET; + reg_base = INT_PTD_OFFSET; or_reg = HC_INT_IRQ_MASK_OR_REG; skip_reg = HC_INT_PTD_SKIPMAP_REG; pe = enqueue_an_INT_packet; @@ -1689,7 +1593,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, default: ints = priv->atl_ints; - reg_base = ATL_REGS_OFFSET; + reg_base = ATL_PTD_OFFSET; or_reg = HC_ATL_IRQ_MASK_OR_REG; skip_reg = HC_ATL_PTD_SKIPMAP_REG; pe = enqueue_an_ATL_packet; @@ -1700,81 +1604,84 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, spin_lock_irqsave(&priv->lock, flags); for (i = 0; i < 32; i++) { - if (ints->urb == urb) { + if (!ints[i].qh) + continue; + BUG_ON(!ints[i].qtd); + + if (ints[i].qtd->urb == urb) { u32 skip_map; u32 or_map; struct isp1760_qtd *qtd; - struct isp1760_qh *qh = ints->qh; + struct isp1760_qh *qh; - skip_map = isp1760_readl(hcd->regs + skip_reg); + skip_map = reg_read32(hcd->regs, skip_reg); skip_map |= 1 << i; - isp1760_writel(skip_map, hcd->regs + skip_reg); + reg_write32(hcd->regs, skip_reg, skip_map); - or_map = isp1760_readl(hcd->regs + or_reg); + or_map = reg_read32(hcd->regs, or_reg); or_map &= ~(1 << i); - isp1760_writel(or_map, hcd->regs + or_reg); + reg_write32(hcd->regs, or_reg, or_map); + + ptd_write(hcd->regs, reg_base, i, &ptd); - priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base - + i * sizeof(ptd), sizeof(ptd)); - qtd = ints->qtd; - qtd = clean_up_qtdlist(qtd); + qtd = ints[i].qtd; + qh = ints[i].qh; - free_mem(priv, ints->payload); + free_mem(hcd, qtd); + qtd = clean_up_qtdlist(qtd, qh); - ints->urb = NULL; - ints->qh = NULL; - ints->qtd = NULL; - ints->data_buffer = NULL; - ints->payload = 0; + ints[i].qh = NULL; + ints[i].qtd = NULL; - isp1760_urb_done(priv, urb, status); + isp1760_urb_done(hcd, urb); if (qtd) pe(hcd, qh, qtd); break; - } else if (ints->qtd) { - struct isp1760_qtd *qtd, *prev_qtd = ints->qtd; + } else { + struct isp1760_qtd *qtd; - for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) { + list_for_each_entry(qtd, &ints[i].qtd->qtd_list, + qtd_list) { if (qtd->urb == urb) { - prev_qtd->hw_next = clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, status); + clean_up_qtdlist(qtd, ints[i].qh); + isp1760_urb_done(hcd, urb); + qtd = NULL; break; } - prev_qtd = qtd; } - /* we found the urb before the end of the list */ - if (qtd) + + /* We found the urb before the last slot */ + if (!qtd) break; } - ints++; } spin_unlock_irqrestore(&priv->lock, flags); return 0; } -static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd) +static irqreturn_t isp1760_irq(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 imask; irqreturn_t irqret = IRQ_NONE; spin_lock(&priv->lock); - if (!(usb_hcd->state & HC_STATE_RUNNING)) + if (!(hcd->state & HC_STATE_RUNNING)) goto leave; - imask = isp1760_readl(usb_hcd->regs + HC_INTERRUPT_REG); + imask = reg_read32(hcd->regs, HC_INTERRUPT_REG); if (unlikely(!imask)) goto leave; - isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG); - if (imask & HC_ATL_INT) - do_atl_int(usb_hcd); + reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); + if (imask & (HC_ATL_INT | HC_SOT_INT)) + do_atl_int(hcd); if (imask & HC_INTL_INT) - do_intl_int(usb_hcd); + do_intl_int(hcd); irqret = IRQ_HANDLED; leave: @@ -1799,12 +1706,12 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) mask = PORT_CSC; spin_lock_irqsave(&priv->lock, flags); - temp = isp1760_readl(hcd->regs + HC_PORTSC1); + temp = reg_read32(hcd->regs, HC_PORTSC1); if (temp & PORT_OWNER) { if (temp & PORT_CSC) { temp &= ~PORT_CSC; - isp1760_writel(temp, hcd->regs + HC_PORTSC1); + reg_write32(hcd->regs, HC_PORTSC1, temp); goto done; } } @@ -1844,9 +1751,9 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv, temp = 1 + (ports / 8); desc->bDescLength = 7 + 2 * temp; - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&desc->bitmap[0], 0, temp); - memset(&desc->bitmap[temp], 0xff, temp); + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&desc->u.hs.DeviceRemovable[0], 0, temp); + memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); /* per-port overcurrent reporting */ temp = 0x0008; @@ -1861,8 +1768,8 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv, #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) -static int check_reset_complete(struct isp1760_hcd *priv, int index, - u32 __iomem *status_reg, int port_status) +static int check_reset_complete(struct usb_hcd *hcd, int index, + int port_status) { if (!(port_status & PORT_CONNECT)) return port_status; @@ -1870,15 +1777,17 @@ static int check_reset_complete(struct isp1760_hcd *priv, int index, /* if reset finished and it's still not enabled -- handoff */ if (!(port_status & PORT_PE)) { - printk(KERN_ERR "port %d full speed --> companion\n", - index + 1); + dev_err(hcd->self.controller, + "port %d full speed --> companion\n", + index + 1); port_status |= PORT_OWNER; port_status &= ~PORT_RWC_BITS; - isp1760_writel(port_status, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, port_status); } else - printk(KERN_ERR "port %d high speed\n", index + 1); + dev_err(hcd->self.controller, "port %d high speed\n", + index + 1); return port_status; } @@ -1888,7 +1797,6 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, { struct isp1760_hcd *priv = hcd_to_priv(hcd); int ports = HCS_N_PORTS(priv->hcs_params); - u32 __iomem *status_reg = hcd->regs + HC_PORTSC1; u32 temp, status; unsigned long flags; int retval = 0; @@ -1917,7 +1825,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, if (!wIndex || wIndex > ports) goto error; wIndex--; - temp = isp1760_readl(status_reg); + temp = reg_read32(hcd->regs, HC_PORTSC1); /* * Even if OWNER is set, so the port is owned by the @@ -1928,7 +1836,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, switch (wValue) { case USB_PORT_FEAT_ENABLE: - isp1760_writel(temp & ~PORT_PE, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE); break; case USB_PORT_FEAT_C_ENABLE: /* XXX error? */ @@ -1942,8 +1850,8 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, goto error; /* resume signaling for 20 msec */ temp &= ~(PORT_RWC_BITS); - isp1760_writel(temp | PORT_RESUME, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, + temp | PORT_RESUME); priv->reset_done = jiffies + msecs_to_jiffies(20); } @@ -1953,11 +1861,11 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, break; case USB_PORT_FEAT_POWER: if (HCS_PPC(priv->hcs_params)) - isp1760_writel(temp & ~PORT_POWER, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, + temp & ~PORT_POWER); break; case USB_PORT_FEAT_C_CONNECTION: - isp1760_writel(temp | PORT_CSC, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC); break; case USB_PORT_FEAT_C_OVER_CURRENT: /* XXX error ?*/ @@ -1968,7 +1876,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, default: goto error; } - isp1760_readl(hcd->regs + HC_USBCMD); + reg_read32(hcd->regs, HC_USBCMD); break; case GetHubDescriptor: isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *) @@ -1983,7 +1891,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, goto error; wIndex--; status = 0; - temp = isp1760_readl(status_reg); + temp = reg_read32(hcd->regs, HC_PORTSC1); /* wPortChange bits */ if (temp & PORT_CSC) @@ -1992,7 +1900,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, /* whoever resumes must GetPortStatus to complete it!! */ if (temp & PORT_RESUME) { - printk(KERN_ERR "Port resume should be skipped.\n"); + dev_err(hcd->self.controller, "Port resume should be skipped.\n"); /* Remote Wakeup received? */ if (!priv->reset_done) { @@ -2000,8 +1908,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = jiffies + msecs_to_jiffies(20); /* check the port again */ - mod_timer(&priv_to_hcd(priv)->rh_timer, - priv->reset_done); + mod_timer(&hcd->rh_timer, priv->reset_done); } /* resume completed? */ @@ -2011,14 +1918,13 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = 0; /* stop resume signaling */ - temp = isp1760_readl(status_reg); - isp1760_writel( - temp & ~(PORT_RWC_BITS | PORT_RESUME), - status_reg); - retval = handshake(priv, status_reg, + temp = reg_read32(hcd->regs, HC_PORTSC1); + reg_write32(hcd->regs, HC_PORTSC1, + temp & ~(PORT_RWC_BITS | PORT_RESUME)); + retval = handshake(hcd, HC_PORTSC1, PORT_RESUME, 0, 2000 /* 2msec */); if (retval != 0) { - isp1760_err(priv, + dev_err(hcd->self.controller, "port %d resume error %d\n", wIndex + 1, retval); goto error; @@ -2035,22 +1941,21 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = 0; /* force reset to complete */ - isp1760_writel(temp & ~PORT_RESET, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET); /* REVISIT: some hardware needs 550+ usec to clear * this bit; seems too long to spin routinely... */ - retval = handshake(priv, status_reg, + retval = handshake(hcd, HC_PORTSC1, PORT_RESET, 0, 750); if (retval != 0) { - isp1760_err(priv, "port %d reset error %d\n", + dev_err(hcd->self.controller, "port %d reset error %d\n", wIndex + 1, retval); goto error; } /* see what we found out */ - temp = check_reset_complete(priv, wIndex, status_reg, - isp1760_readl(status_reg)); + temp = check_reset_complete(hcd, wIndex, + reg_read32(hcd->regs, HC_PORTSC1)); } /* * Even if OWNER is set, there's no harm letting khubd @@ -2059,12 +1964,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, */ if (temp & PORT_OWNER) - printk(KERN_ERR "Warning: PORT_OWNER is set\n"); + dev_err(hcd->self.controller, "PORT_OWNER is set\n"); if (temp & PORT_CONNECT) { status |= USB_PORT_STAT_CONNECTION; /* status may be from integrated TT */ - status |= ehci_port_speed(priv, temp); + status |= USB_PORT_STAT_HIGH_SPEED; } if (temp & PORT_PE) status |= USB_PORT_STAT_ENABLE; @@ -2093,14 +1998,14 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, if (!wIndex || wIndex > ports) goto error; wIndex--; - temp = isp1760_readl(status_reg); + temp = reg_read32(hcd->regs, HC_PORTSC1); if (temp & PORT_OWNER) break; /* temp &= ~PORT_RWC_BITS; */ switch (wValue) { case USB_PORT_FEAT_ENABLE: - isp1760_writel(temp | PORT_PE, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE); break; case USB_PORT_FEAT_SUSPEND: @@ -2108,12 +2013,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, || (temp & PORT_RESET) != 0) goto error; - isp1760_writel(temp | PORT_SUSPEND, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND); break; case USB_PORT_FEAT_POWER: if (HCS_PPC(priv->hcs_params)) - isp1760_writel(temp | PORT_POWER, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, + temp | PORT_POWER); break; case USB_PORT_FEAT_RESET: if (temp & PORT_RESUME) @@ -2136,12 +2041,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = jiffies + msecs_to_jiffies(50); } - isp1760_writel(temp, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp); break; default: goto error; } - isp1760_readl(hcd->regs + HC_USBCMD); + reg_read32(hcd->regs, HC_USBCMD); break; default: @@ -2153,10 +2058,10 @@ error: return retval; } -static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd, +static void isp1760_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct isp1760_qh *qh; struct isp1760_qtd *qtd; unsigned long flags; @@ -2176,16 +2081,16 @@ static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd, qtd_list); if (qtd->status & URB_ENQUEUED) { - spin_unlock_irqrestore(&priv->lock, flags); - isp1760_urb_dequeue(usb_hcd, qtd->urb, -ECONNRESET); + isp1760_urb_dequeue(hcd, qtd->urb, -ECONNRESET); spin_lock_irqsave(&priv->lock, flags); } else { struct urb *urb; urb = qtd->urb; - clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, -ECONNRESET); + clean_up_qtdlist(qtd, qh); + urb->status = -ECONNRESET; + isp1760_urb_done(hcd, urb); } } while (1); @@ -2203,7 +2108,7 @@ static int isp1760_get_frame(struct usb_hcd *hcd) struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 fr; - fr = isp1760_readl(hcd->regs + HC_FRINDEX); + fr = reg_read32(hcd->regs, HC_FRINDEX); return (fr >> 3) % priv->periodic_size; } @@ -2217,13 +2122,13 @@ static void isp1760_stop(struct usb_hcd *hcd) mdelay(20); spin_lock_irq(&priv->lock); - ehci_reset(priv); + ehci_reset(hcd); /* Disable IRQ */ - temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL); + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN); spin_unlock_irq(&priv->lock); - isp1760_writel(0, hcd->regs + HC_CONFIGFLAG); + reg_write32(hcd->regs, HC_CONFIGFLAG, 0); } static void isp1760_shutdown(struct usb_hcd *hcd) @@ -2231,12 +2136,12 @@ static void isp1760_shutdown(struct usb_hcd *hcd) u32 command, temp; isp1760_stop(hcd); - temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL); + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN); - command = isp1760_readl(hcd->regs + HC_USBCMD); + command = reg_read32(hcd->regs, HC_USBCMD); command &= ~CMD_RUN; - isp1760_writel(command, hcd->regs + HC_USBCMD); + reg_write32(hcd->regs, HC_USBCMD, command); } static const struct hc_driver isp1760_hc_driver = { diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h index 6931ef5..8705076 100644 --- a/drivers/usb/host/isp1760-hcd.h +++ b/drivers/usb/host/isp1760-hcd.h @@ -69,6 +69,7 @@ void deinit_kmem_cache(void); #define HC_INTERRUPT_ENABLE 0x314 #define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT) +#define INTERRUPT_ENABLE_SOT_MASK (HC_INTL_INT | HC_SOT_INT | HC_EOT_INT) #define HC_ISO_INT (1 << 9) #define HC_ATL_INT (1 << 8) @@ -83,37 +84,29 @@ void deinit_kmem_cache(void); #define HC_INT_IRQ_MASK_AND_REG 0x328 #define HC_ATL_IRQ_MASK_AND_REG 0x32C -/* Register sets */ -#define HC_BEGIN_OF_ATL 0x0c00 -#define HC_BEGIN_OF_INT 0x0800 -#define HC_BEGIN_OF_ISO 0x0400 -#define HC_BEGIN_OF_PAYLOAD 0x1000 - /* urb state*/ #define DELETE_URB (0x0008) #define NO_TRANSFER_ACTIVE (0xffffffff) -#define ATL_REGS_OFFSET (0xc00) -#define INT_REGS_OFFSET (0x800) - -/* Philips Transfer Descriptor (PTD) */ +/* Philips Proprietary Transfer Descriptor (PTD) */ +typedef __u32 __bitwise __dw; struct ptd { - __le32 dw0; - __le32 dw1; - __le32 dw2; - __le32 dw3; - __le32 dw4; - __le32 dw5; - __le32 dw6; - __le32 dw7; + __dw dw0; + __dw dw1; + __dw dw2; + __dw dw3; + __dw dw4; + __dw dw5; + __dw dw6; + __dw dw7; }; +#define PTD_OFFSET 0x0400 +#define ISO_PTD_OFFSET 0x0400 +#define INT_PTD_OFFSET 0x0800 +#define ATL_PTD_OFFSET 0x0c00 +#define PAYLOAD_OFFSET 0x1000 struct inter_packet_info { - void *data_buffer; - u32 payload; -#define PTD_FIRE_NEXT (1 << 0) -#define PTD_URB_FINISHED (1 << 1) - struct urb *urb; struct isp1760_qh *qh; struct isp1760_qtd *qtd; }; @@ -122,15 +115,6 @@ struct inter_packet_info { typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh, struct isp1760_qtd *qtd); -#define isp1760_dbg(priv, fmt, args...) \ - dev_dbg(priv_to_hcd(priv)->self.controller, fmt, ##args) - -#define isp1760_info(priv, fmt, args...) \ - dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args) - -#define isp1760_err(priv, fmt, args...) \ - dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args) - /* * Device flags that can vary from board to board. All of these * indicate the most "atypical" case, so that a devflags of 0 is @@ -167,10 +151,8 @@ struct memory_chunk { #define BLOCK_2_SIZE 1024 #define BLOCK_3_SIZE 8192 #define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM) -#define PAYLOAD_SIZE 0xf000 - -/* I saw if some reloads if the pointer was negative */ -#define ISP1760_NULL_POINTER (0x400) +#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE +#define PAYLOAD_AREA_SIZE 0xf000 /* ATL */ /* DW0 */ @@ -224,6 +206,4 @@ struct memory_chunk { #define NAK_COUNTER (0) #define ERR_COUNTER (2) -#define HC_ATL_PL_SIZE (8192) - #endif diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 3b28dbfc..7ee3005 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -27,8 +27,7 @@ #endif #ifdef CONFIG_PPC_OF -static int of_isp1760_probe(struct platform_device *dev, - const struct of_device_id *match) +static int of_isp1760_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct device_node *dp = dev->dev.of_node; @@ -119,7 +118,7 @@ static const struct of_device_id of_isp1760_match[] = { }; MODULE_DEVICE_TABLE(of, of_isp1760_match); -static struct of_platform_driver isp1760_of_driver = { +static struct platform_driver isp1760_of_driver = { .driver = { .name = "nxp-isp1760", .owner = THIS_MODULE, @@ -398,7 +397,7 @@ static int __init isp1760_init(void) if (!ret) any_ret = 0; #ifdef CONFIG_PPC_OF - ret = of_register_platform_driver(&isp1760_of_driver); + ret = platform_driver_register(&isp1760_of_driver); if (!ret) any_ret = 0; #endif @@ -418,7 +417,7 @@ static void __exit isp1760_exit(void) { platform_driver_unregister(&isp1760_plat_driver); #ifdef CONFIG_PPC_OF - of_unregister_platform_driver(&isp1760_of_driver); + platform_driver_unregister(&isp1760_of_driver); #endif #ifdef CONFIG_PCI pci_unregister_driver(&isp1761_pci_driver); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 759a12f..e728863 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -75,6 +75,7 @@ static const char hcd_name [] = "ohci_hcd"; #define STATECHANGE_DELAY msecs_to_jiffies(300) #include "ohci.h" +#include "pci-quirks.h" static void ohci_dump (struct ohci_hcd *ohci, int verbose); static int ohci_init (struct ohci_hcd *ohci); @@ -85,18 +86,8 @@ static int ohci_restart (struct ohci_hcd *ohci); #endif #ifdef CONFIG_PCI -static void quirk_amd_pll(int state); -static void amd_iso_dev_put(void); static void sb800_prefetch(struct ohci_hcd *ohci, int on); #else -static inline void quirk_amd_pll(int state) -{ - return; -} -static inline void amd_iso_dev_put(void) -{ - return; -} static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) { return; @@ -912,7 +903,7 @@ static void ohci_stop (struct usb_hcd *hcd) if (quirk_zfmicro(ohci)) del_timer(&ohci->unlink_watchdog); if (quirk_amdiso(ohci)) - amd_iso_dev_put(); + usb_amd_dev_put(); remove_debug_files (ohci); ohci_mem_cleanup (ohci); @@ -1023,11 +1014,6 @@ MODULE_LICENSE ("GPL"); #define OMAP3_PLATFORM_DRIVER ohci_hcd_omap3_driver #endif -#ifdef CONFIG_ARCH_LH7A404 -#include "ohci-lh7a404.c" -#define PLATFORM_DRIVER ohci_hcd_lh7a404_driver -#endif - #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #include "ohci-pxa27x.c" #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver @@ -1068,10 +1054,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) +#ifdef CONFIG_USB_OHCI_SH #include "ohci-sh.c" #define PLATFORM_DRIVER ohci_hcd_sh_driver #endif @@ -1180,7 +1163,7 @@ static int __init ohci_hcd_mod_init(void) #endif #ifdef OF_PLATFORM_DRIVER - retval = of_register_platform_driver(&OF_PLATFORM_DRIVER); + retval = platform_driver_register(&OF_PLATFORM_DRIVER); if (retval < 0) goto error_of_platform; #endif @@ -1239,7 +1222,7 @@ static int __init ohci_hcd_mod_init(void) error_sa1111: #endif #ifdef OF_PLATFORM_DRIVER - of_unregister_platform_driver(&OF_PLATFORM_DRIVER); + platform_driver_unregister(&OF_PLATFORM_DRIVER); error_of_platform: #endif #ifdef PLATFORM_DRIVER @@ -1287,7 +1270,7 @@ static void __exit ohci_hcd_mod_exit(void) sa1111_driver_unregister(&SA1111_DRIVER); #endif #ifdef OF_PLATFORM_DRIVER - of_unregister_platform_driver(&OF_PLATFORM_DRIVER); + platform_driver_unregister(&OF_PLATFORM_DRIVER); #endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index cddcda9..9154615 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -580,15 +580,16 @@ ohci_hub_descriptor ( temp |= 0x0008; desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp); - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ rh = roothub_b (ohci); - memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); - desc->bitmap [0] = rh & RH_B_DR; + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR; if (ohci->num_ports > 7) { - desc->bitmap [1] = (rh & RH_B_DR) >> 8; - desc->bitmap [2] = 0xff; + desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8; + desc->u.hs.DeviceRemovable[2] = 0xff; } else - desc->bitmap [1] = 0xff; + desc->u.hs.DeviceRemovable[1] = 0xff; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c deleted file mode 100644 index 18d39f0..0000000 --- a/drivers/usb/host/ohci-lh7a404.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> - * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * (C) Copyright 2002 Hewlett-Packard Company - * - * Bus Glue for Sharp LH7A404 - * - * Written by Christopher Hoover <ch@hpl.hp.com> - * Based on fragments of previous driver by Russell King et al. - * - * Modified for LH7A404 from ohci-sa1111.c - * by Durgesh Pattamatta <pattamattad@sharpsec.com> - * - * This file is licenced under the GPL. - */ - -#include <linux/platform_device.h> -#include <linux/signal.h> - -#include <mach/hardware.h> - - -extern int usb_disabled(void); - -/*-------------------------------------------------------------------------*/ - -static void lh7a404_start_hc(struct platform_device *dev) -{ - printk(KERN_DEBUG "%s: starting LH7A404 OHCI USB Controller\n", - __FILE__); - - /* - * Now, carefully enable the USB clock, and take - * the USB host controller out of reset. - */ - CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */ - udelay(1000); - USBH_CMDSTATUS = OHCI_HCR; - - printk(KERN_DEBUG "%s: Clock to USB host has been enabled \n", __FILE__); -} - -static void lh7a404_stop_hc(struct platform_device *dev) -{ - printk(KERN_DEBUG "%s: stopping LH7A404 OHCI USB Controller\n", - __FILE__); - - CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */ -} - - -/*-------------------------------------------------------------------------*/ - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - - -/** - * usb_hcd_lh7a404_probe - initialize LH7A404-based HCDs - * Context: !in_interrupt() - * - * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - * - */ -int usb_hcd_lh7a404_probe (const struct hc_driver *driver, - struct platform_device *dev) -{ - int retval; - struct usb_hcd *hcd; - - if (dev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug("resource[1] is not IORESOURCE_IRQ"); - return -ENOMEM; - } - - hcd = usb_create_hcd(driver, &dev->dev, "lh7a404"); - if (!hcd) - return -ENOMEM; - hcd->rsrc_start = dev->resource[0].start; - hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - pr_debug("ioremap failed"); - retval = -ENOMEM; - goto err2; - } - - lh7a404_start_hc(dev); - ohci_hcd_init(hcd_to_ohci(hcd)); - - retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED); - if (retval == 0) - return retval; - - lh7a404_stop_hc(dev); - iounmap(hcd->regs); - err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - err1: - usb_put_hcd(hcd); - return retval; -} - - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - -/** - * usb_hcd_lh7a404_remove - shutdown processing for LH7A404-based HCDs - * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_lh7a404_probe(), first invoking - * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. - * - */ -void usb_hcd_lh7a404_remove (struct usb_hcd *hcd, struct platform_device *dev) -{ - usb_remove_hcd(hcd); - lh7a404_stop_hc(dev); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); -} - -/*-------------------------------------------------------------------------*/ - -static int __devinit -ohci_lh7a404_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - ohci_dbg (ohci, "ohci_lh7a404_start, ohci:%p", ohci); - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_lh7a404_hc_driver = { - .description = hcd_name, - .product_desc = "LH7A404 OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_lh7a404_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_lh7a404_drv_probe(struct platform_device *pdev) -{ - int ret; - - pr_debug ("In ohci_hcd_lh7a404_drv_probe"); - - if (usb_disabled()) - return -ENODEV; - - ret = usb_hcd_lh7a404_probe(&ohci_lh7a404_hc_driver, pdev); - return ret; -} - -static int ohci_hcd_lh7a404_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_hcd_lh7a404_remove(hcd, pdev); - return 0; -} - /*TBD*/ -/*static int ohci_hcd_lh7a404_drv_suspend(struct platform_device *dev) -{ - struct usb_hcd *hcd = platform_get_drvdata(dev); - - return 0; -} -static int ohci_hcd_lh7a404_drv_resume(struct platform_device *dev) -{ - struct usb_hcd *hcd = platform_get_drvdata(dev); - - - return 0; -} -*/ - -static struct platform_driver ohci_hcd_lh7a404_driver = { - .probe = ohci_hcd_lh7a404_drv_probe, - .remove = ohci_hcd_lh7a404_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - /*.suspend = ohci_hcd_lh7a404_drv_suspend, */ - /*.resume = ohci_hcd_lh7a404_drv_resume, */ - .driver = { - .name = "lh7a404-ohci", - .owner = THIS_MODULE, - }, -}; - -MODULE_ALIAS("platform:lh7a404-ohci"); diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index a37d599..6048f2f 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -7,6 +7,7 @@ * Copyright (C) 2007-2010 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Based on ehci-omap.c and some other ohci glue layers * @@ -24,150 +25,15 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Mar 10th, 2010): + * TODO (last updated Feb 27, 2011): * - add kernel-doc - * - Factor out code common to EHCI to a separate file - * - Make EHCI and OHCI coexist together - * - needs newer silicon versions to actually work - * - the last one to be loaded currently steps on the other's toes - * - Add hooks for configuring transceivers, etc. at init/exit - * - Add aggressive clock-management code */ #include <linux/platform_device.h> -#include <linux/clk.h> - #include <plat/usb.h> -/* - * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES - * Use ohci_omap_readl()/ohci_omap_writel() functions - */ - -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_CHANNEL_COUNT 3 - -/* UHH Register Set */ -#define OMAP_UHH_REVISION (0x00) -#define OMAP_UHH_SYSCONFIG (0x10) -#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) -#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_UHH_SYSSTATUS (0x14) -#define OMAP_UHH_SYSSTATUS_UHHRESETDONE (1 << 0) -#define OMAP_UHH_SYSSTATUS_OHCIRESETDONE (1 << 1) -#define OMAP_UHH_SYSSTATUS_EHCIRESETDONE (1 << 2) -#define OMAP_UHH_HOSTCONFIG (0x40) -#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) -#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) -#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) -#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) -#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) -#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) -#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) - -#define OMAP_UHH_DEBUG_CSR (0x44) - /*-------------------------------------------------------------------------*/ -static inline void ohci_omap_writel(void __iomem *base, u32 reg, u32 val) -{ - __raw_writel(val, base + reg); -} - -static inline u32 ohci_omap_readl(void __iomem *base, u32 reg) -{ - return __raw_readl(base + reg); -} - -static inline void ohci_omap_writeb(void __iomem *base, u8 reg, u8 val) -{ - __raw_writeb(val, base + reg); -} - -static inline u8 ohci_omap_readb(void __iomem *base, u8 reg) -{ - return __raw_readb(base + reg); -} - -/*-------------------------------------------------------------------------*/ - -struct ohci_hcd_omap3 { - struct ohci_hcd *ohci; - struct device *dev; - - struct clk *usbhost_ick; - struct clk *usbhost2_120m_fck; - struct clk *usbhost1_48m_fck; - struct clk *usbtll_fck; - struct clk *usbtll_ick; - - /* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */ - enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; - void __iomem *uhh_base; - void __iomem *tll_base; - void __iomem *ohci_base; - - unsigned es2_compatibility:1; -}; - -/*-------------------------------------------------------------------------*/ - -static void ohci_omap3_clock_power(struct ohci_hcd_omap3 *omap, int on) -{ - if (on) { - clk_enable(omap->usbtll_ick); - clk_enable(omap->usbtll_fck); - clk_enable(omap->usbhost_ick); - clk_enable(omap->usbhost1_48m_fck); - clk_enable(omap->usbhost2_120m_fck); - } else { - clk_disable(omap->usbhost2_120m_fck); - clk_disable(omap->usbhost1_48m_fck); - clk_disable(omap->usbhost_ick); - clk_disable(omap->usbtll_fck); - clk_disable(omap->usbtll_ick); - } -} - static int ohci_omap3_init(struct usb_hcd *hcd) { dev_dbg(hcd->self.controller, "starting OHCI controller\n"); @@ -175,7 +41,6 @@ static int ohci_omap3_init(struct usb_hcd *hcd) return ohci_init(hcd_to_ohci(hcd)); } - /*-------------------------------------------------------------------------*/ static int ohci_omap3_start(struct usb_hcd *hcd) @@ -202,325 +67,6 @@ static int ohci_omap3_start(struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ -/* - * convert the port-mode enum to a value we can use in the FSLSMODE - * field of USBTLL_CHANNEL_CONF - */ -static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode) -{ - switch (mode) { - case OMAP_OHCI_PORT_MODE_UNUSED: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - return 0x0; - - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - return 0x1; - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - return 0x2; - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - return 0x3; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - return 0x4; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - return 0x5; - - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - return 0x6; - - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - return 0x7; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - return 0xA; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - return 0xB; - default: - pr_warning("Invalid port mode, using default\n"); - return 0x0; - } -} - -static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap) -{ - u32 reg; - int i; - - /* Program TLL SHARED CONF */ - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; - reg |= OMAP_TLL_SHARED_CONF_USB_DIVRATION; - reg |= OMAP_TLL_SHARED_CONF_FCLK_IS_ON; - ohci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Program each TLL channel */ - /* - * REVISIT: Only the 3-pin and 4-pin PHY modes have - * actually been tested. - */ - for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { - - /* Enable only those channels that are actually used */ - if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED) - continue; - - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - reg |= ohci_omap3_fslsmode(omap->port_mode[i]) - << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; - reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - ohci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - } -} - -/* omap3_start_ohci - * - Start the TI USBHOST controller - */ -static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - u32 reg = 0; - int ret = 0; - - dev_dbg(omap->dev, "starting TI OHCI USB Controller\n"); - - /* Get all the clock handles we need */ - omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - dev_err(omap->dev, "could not get usbhost_ick\n"); - ret = PTR_ERR(omap->usbhost_ick); - goto err_host_ick; - } - - omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck"); - if (IS_ERR(omap->usbhost2_120m_fck)) { - dev_err(omap->dev, "could not get usbhost_120m_fck\n"); - ret = PTR_ERR(omap->usbhost2_120m_fck); - goto err_host_120m_fck; - } - - omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck"); - if (IS_ERR(omap->usbhost1_48m_fck)) { - dev_err(omap->dev, "could not get usbhost_48m_fck\n"); - ret = PTR_ERR(omap->usbhost1_48m_fck); - goto err_host_48m_fck; - } - - omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - dev_err(omap->dev, "could not get usbtll_fck\n"); - ret = PTR_ERR(omap->usbtll_fck); - goto err_tll_fck; - } - - omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - dev_err(omap->dev, "could not get usbtll_ick\n"); - ret = PTR_ERR(omap->usbtll_ick); - goto err_tll_ick; - } - - /* Now enable all the clocks in the correct order */ - ohci_omap3_clock_power(omap, 1); - - /* perform TLL soft reset, and wait until reset is complete */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "operation timed out\n"); - ret = -EINVAL; - goto err_sys_status; - } - } - - dev_dbg(omap->dev, "TLL reset done\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_CACTIVITY); - - - /* Put UHH in NoIdle/NoStandby mode */ - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - reg &= ~OMAP_UHH_SYSCONFIG_SOFTRESET; - - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - /* setup ULPI bypass and burst configurations */ - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); - reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - - /* - * REVISIT: Pi_CONNECT_STATUS controls MStandby - * assertion and Swakeup generation - let us not - * worry about this for now. OMAP HWMOD framework - * might take care of this later. If not, we can - * update these registers when adding aggressive - * clock management code. - * - * For now, turn off all the Pi_CONNECT_STATUS bits - * - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - */ - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - if (omap->es2_compatibility) { - /* - * All OHCI modes need to go through the TLL, - * unlike in the EHCI case. So use UTMI mode - * for all ports for OHCI, on ES2.x silicon - */ - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - - } - ohci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - - ohci_omap3_tll_config(omap); - - return 0; - -err_sys_status: - ohci_omap3_clock_power(omap, 0); - clk_put(omap->usbtll_ick); - -err_tll_ick: - clk_put(omap->usbtll_fck); - -err_tll_fck: - clk_put(omap->usbhost1_48m_fck); - -err_host_48m_fck: - clk_put(omap->usbhost2_120m_fck); - -err_host_120m_fck: - clk_put(omap->usbhost_ick); - -err_host_ick: - return ret; -} - -static void omap3_stop_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - - dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); - - /* Reset USBHOST for insmod/rmmod to work */ - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, - OMAP_UHH_SYSCONFIG_SOFTRESET); - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_UHHRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_OHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_EHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); - - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap3_clock_power(omap, 0); - - if (omap->usbtll_fck != NULL) { - clk_put(omap->usbtll_fck); - omap->usbtll_fck = NULL; - } - - if (omap->usbhost_ick != NULL) { - clk_put(omap->usbhost_ick); - omap->usbhost_ick = NULL; - } - - if (omap->usbhost1_48m_fck != NULL) { - clk_put(omap->usbhost1_48m_fck); - omap->usbhost1_48m_fck = NULL; - } - - if (omap->usbhost2_120m_fck != NULL) { - clk_put(omap->usbhost2_120m_fck); - omap->usbhost2_120m_fck = NULL; - } - - if (omap->usbtll_ick != NULL) { - clk_put(omap->usbtll_ick); - omap->usbtll_ick = NULL; - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -} - -/*-------------------------------------------------------------------------*/ - static const struct hc_driver ohci_omap3_hc_driver = { .description = hcd_name, .product_desc = "OMAP3 OHCI Host Controller", @@ -580,107 +126,77 @@ static const struct hc_driver ohci_omap3_hc_driver = { */ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) { - struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; - struct ohci_hcd_omap3 *omap; - struct resource *res; - struct usb_hcd *hcd; - int ret = -ENODEV; - int irq; + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = NULL; + void __iomem *regs = NULL; + struct resource *res; + int ret = -ENODEV; + int irq; if (usb_disabled()) - goto err_disabled; + goto err_end; - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform_data\n"); - goto err_pdata; + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; } - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_byname(pdev, "ohci-irq"); + if (irq < 0) { + dev_err(dev, "OHCI irq failed\n"); + return -ENODEV; + } - omap = kzalloc(sizeof(*omap), GFP_KERNEL); - if (!omap) { - ret = -ENOMEM; - goto err_disabled; + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "ohci"); + if (!ret) { + dev_err(dev, "UHH OHCI get resource failed\n"); + return -ENOMEM; } - hcd = usb_create_hcd(&ohci_omap3_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - ret = -ENOMEM; - goto err_create_hcd; + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "UHH OHCI ioremap failed\n"); + return -ENOMEM; } - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->port_mode[0] = pdata->port_mode[0]; - omap->port_mode[1] = pdata->port_mode[1]; - omap->port_mode[2] = pdata->port_mode[2]; - omap->es2_compatibility = pdata->es2_compatibility; - omap->ohci = hcd_to_ohci(hcd); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, + dev_name(dev)); + if (!hcd) { + dev_err(dev, "usb_create_hcd failed\n"); + goto err_io; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); + hcd->regs = regs; - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "OHCI ioremap failed\n"); - ret = -ENOMEM; - goto err_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(&pdev->dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_uhh_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(&pdev->dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll_ioremap; - } - - ret = omap3_start_ohci(omap, hcd); + ret = omap_usbhs_enable(dev); if (ret) { - dev_dbg(&pdev->dev, "failed to start ohci\n"); - goto err_start; + dev_dbg(dev, "failed to start ohci\n"); + goto err_end; } - ohci_hcd_init(omap->ohci); + ohci_hcd_init(hcd_to_ohci(hcd)); ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_dbg(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } return 0; err_add_hcd: - omap3_stop_ohci(omap, hcd); - -err_start: - iounmap(omap->tll_base); - -err_tll_ioremap: - iounmap(omap->uhh_base); - -err_uhh_ioremap: - iounmap(hcd->regs); + omap_usbhs_disable(dev); -err_ioremap: +err_end: usb_put_hcd(hcd); -err_create_hcd: - kfree(omap); -err_pdata: -err_disabled: +err_io: + iounmap(regs); + return ret; } @@ -699,24 +215,20 @@ err_disabled: */ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); - usb_remove_hcd(hcd); - omap3_stop_ohci(omap, hcd); iounmap(hcd->regs); - iounmap(omap->tll_base); - iounmap(omap->uhh_base); + usb_remove_hcd(hcd); + omap_usbhs_disable(dev); usb_put_hcd(hcd); - kfree(omap); return 0; } static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 36ee9a6..d84d6f0 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -22,24 +22,6 @@ #include <linux/io.h> -/* constants used to work around PM-related transfer - * glitches in some AMD 700 series southbridges - */ -#define AB_REG_BAR 0xf0 -#define AB_INDX(addr) ((addr) + 0x00) -#define AB_DATA(addr) ((addr) + 0x04) -#define AX_INDXC 0X30 -#define AX_DATAC 0x34 - -#define NB_PCIE_INDX_ADDR 0xe0 -#define NB_PCIE_INDX_DATA 0xe4 -#define PCIE_P_CNTL 0x10040 -#define BIF_NB 0x10002 - -static struct pci_dev *amd_smbus_dev; -static struct pci_dev *amd_hb_dev; -static int amd_ohci_iso_count; - /*-------------------------------------------------------------------------*/ static int broken_suspend(struct usb_hcd *hcd) @@ -168,15 +150,18 @@ static int ohci_quirk_nec(struct usb_hcd *hcd) static int ohci_quirk_amd700(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); - u8 rev = 0; + struct pci_dev *amd_smbus_dev; + u8 rev; - if (!amd_smbus_dev) - amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, - PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); + if (usb_amd_find_chipset_info()) + ohci->flags |= OHCI_QUIRK_AMD_PLL; + + amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, + PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); if (!amd_smbus_dev) return 0; - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + rev = amd_smbus_dev->revision; /* SB800 needs pre-fetch fix */ if ((rev >= 0x40) && (rev <= 0x4f)) { @@ -184,19 +169,8 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); } - if ((rev > 0x3b) || (rev < 0x30)) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; - } - - amd_ohci_iso_count++; - - if (!amd_hb_dev) - amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL); - - ohci->flags |= OHCI_QUIRK_AMD_ISO; - ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n"); + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; return 0; } @@ -215,74 +189,6 @@ static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd) return 0; } -/* - * The hardware normally enables the A-link power management feature, which - * lets the system lower the power consumption in idle states. - * - * Assume the system is configured to have USB 1.1 ISO transfers going - * to or from a USB device. Without this quirk, that stream may stutter - * or have breaks occasionally. For transfers going to speakers, this - * makes a very audible mess... - * - * That audio playback corruption is due to the audio stream getting - * interrupted occasionally when the link goes in lower power state - * This USB quirk prevents the link going into that lower power state - * during audio playback or other ISO operations. - */ -static void quirk_amd_pll(int on) -{ - u32 addr; - u32 val; - u32 bit = (on > 0) ? 1 : 0; - - pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr); - - /* BIT names/meanings are NDA-protected, sorry ... */ - - outl(AX_INDXC, AB_INDX(addr)); - outl(0x40, AB_DATA(addr)); - outl(AX_DATAC, AB_INDX(addr)); - val = inl(AB_DATA(addr)); - val &= ~((1 << 3) | (1 << 4) | (1 << 9)); - val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9); - outl(val, AB_DATA(addr)); - - if (amd_hb_dev) { - addr = PCIE_P_CNTL; - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr); - - pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val); - val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12)); - val |= bit | (bit << 3) | (bit << 12); - val |= ((!bit) << 4) | ((!bit) << 9); - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val); - - addr = BIF_NB; - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr); - - pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val); - val &= ~(1 << 8); - val |= bit << 8; - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val); - } -} - -static void amd_iso_dev_put(void) -{ - amd_ohci_iso_count--; - if (amd_ohci_iso_count == 0) { - if (amd_smbus_dev) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - } - if (amd_hb_dev) { - pci_dev_put(amd_hb_dev); - amd_hb_dev = NULL; - } - } - -} - static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index b2c2dbf..1ca1821 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -80,8 +80,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = { }; -static int __devinit -ohci_hcd_ppc_of_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; @@ -201,14 +200,12 @@ static int ohci_hcd_ppc_of_remove(struct platform_device *op) return 0; } -static int ohci_hcd_ppc_of_shutdown(struct platform_device *op) +static void ohci_hcd_ppc_of_shutdown(struct platform_device *op) { struct usb_hcd *hcd = dev_get_drvdata(&op->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); - - return 0; } @@ -243,7 +240,7 @@ MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match); #endif -static struct of_platform_driver ohci_hcd_ppc_of_driver = { +static struct platform_driver ohci_hcd_ppc_of_driver = { .probe = ohci_hcd_ppc_of_probe, .remove = ohci_hcd_ppc_of_remove, .shutdown = ohci_hcd_ppc_of_shutdown, diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index 83094d0..dd24fc1 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -52,7 +52,7 @@ __acquires(ohci->lock) ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--; if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { if (quirk_amdiso(ohci)) - quirk_amd_pll(1); + usb_amd_quirk_pll_enable(); if (quirk_amdprefetch(ohci)) sb800_prefetch(ohci, 0); } @@ -686,7 +686,7 @@ static void td_submit_urb ( } if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { if (quirk_amdiso(ohci)) - quirk_amd_pll(0); + usb_amd_quirk_pll_disable(); if (quirk_amdprefetch(ohci)) sb800_prefetch(ohci, 1); } diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 51facb9..35e5fd6 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -401,7 +401,7 @@ struct ohci_hcd { #define OHCI_QUIRK_NEC 0x40 /* lost interrupts */ #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ -#define OHCI_QUIRK_AMD_ISO 0x200 /* ISO transfers*/ +#define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ #define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ // there are also chip quirks/bugs in init logic @@ -433,7 +433,7 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci) } static inline int quirk_amdiso(struct ohci_hcd *ohci) { - return ohci->flags & OHCI_QUIRK_AMD_ISO; + return ohci->flags & OHCI_QUIRK_AMD_PLL; } static inline int quirk_amdprefetch(struct ohci_hcd *ohci) { @@ -575,18 +575,8 @@ static inline void _ohci_writel (const struct ohci_hcd *ohci, #endif } -#ifdef CONFIG_ARCH_LH7A404 -/* Marc Singer: at the time this code was written, the LH7A404 - * had a problem reading the USB host registers. This - * implementation of the ohci_readl function performs the read - * twice as a work-around. - */ -#define ohci_readl(o,r) (_ohci_readl(o,r),_ohci_readl(o,r)) -#define ohci_writel(o,v,r) _ohci_writel(o,v,r) -#else #define ohci_readl(o,r) _ohci_readl(o,r) #define ohci_writel(o,v,r) _ohci_writel(o,v,r) -#endif /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index e0cb12b..38193f4 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -451,9 +451,9 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu, temp = 1 + (ports / 8); desc->bDescLength = 7 + 2 * temp; - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&desc->bitmap[0], 0, temp); - memset(&desc->bitmap[temp], 0xff, temp); + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&desc->u.hs.DeviceRemovable[0], 0, temp); + memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); temp = 0x0008; /* per-port overcurrent reporting */ if (HCS_PPC(oxu->hcs_params)) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 4c502c8..1d586d4 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -52,6 +52,264 @@ #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ +/* AMD quirk use */ +#define AB_REG_BAR_LOW 0xe0 +#define AB_REG_BAR_HIGH 0xe1 +#define AB_REG_BAR_SB700 0xf0 +#define AB_INDX(addr) ((addr) + 0x00) +#define AB_DATA(addr) ((addr) + 0x04) +#define AX_INDXC 0x30 +#define AX_DATAC 0x34 + +#define NB_PCIE_INDX_ADDR 0xe0 +#define NB_PCIE_INDX_DATA 0xe4 +#define PCIE_P_CNTL 0x10040 +#define BIF_NB 0x10002 +#define NB_PIF0_PWRDOWN_0 0x01100012 +#define NB_PIF0_PWRDOWN_1 0x01100013 + +static struct amd_chipset_info { + struct pci_dev *nb_dev; + struct pci_dev *smbus_dev; + int nb_type; + int sb_type; + int isoc_reqs; + int probe_count; + int probe_result; +} amd_chipset; + +static DEFINE_SPINLOCK(amd_lock); + +int usb_amd_find_chipset_info(void) +{ + u8 rev = 0; + unsigned long flags; + + spin_lock_irqsave(&amd_lock, flags); + + amd_chipset.probe_count++; + /* probe only once */ + if (amd_chipset.probe_count > 1) { + spin_unlock_irqrestore(&amd_lock, flags); + return amd_chipset.probe_result; + } + + amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); + if (amd_chipset.smbus_dev) { + rev = amd_chipset.smbus_dev->revision; + if (rev >= 0x40) + amd_chipset.sb_type = 1; + else if (rev >= 0x30 && rev <= 0x3b) + amd_chipset.sb_type = 3; + } else { + amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x780b, NULL); + if (!amd_chipset.smbus_dev) { + spin_unlock_irqrestore(&amd_lock, flags); + return 0; + } + rev = amd_chipset.smbus_dev->revision; + if (rev >= 0x11 && rev <= 0x18) + amd_chipset.sb_type = 2; + } + + if (amd_chipset.sb_type == 0) { + if (amd_chipset.smbus_dev) { + pci_dev_put(amd_chipset.smbus_dev); + amd_chipset.smbus_dev = NULL; + } + spin_unlock_irqrestore(&amd_lock, flags); + return 0; + } + + amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL); + if (amd_chipset.nb_dev) { + amd_chipset.nb_type = 1; + } else { + amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x1510, NULL); + if (amd_chipset.nb_dev) { + amd_chipset.nb_type = 2; + } else { + amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x9600, NULL); + if (amd_chipset.nb_dev) + amd_chipset.nb_type = 3; + } + } + + amd_chipset.probe_result = 1; + printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); + + spin_unlock_irqrestore(&amd_lock, flags); + return amd_chipset.probe_result; +} +EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); + +/* + * The hardware normally enables the A-link power management feature, which + * lets the system lower the power consumption in idle states. + * + * This USB quirk prevents the link going into that lower power state + * during isochronous transfers. + * + * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of + * some AMD platforms may stutter or have breaks occasionally. + */ +static void usb_amd_quirk_pll(int disable) +{ + u32 addr, addr_low, addr_high, val; + u32 bit = disable ? 0 : 1; + unsigned long flags; + + spin_lock_irqsave(&amd_lock, flags); + + if (disable) { + amd_chipset.isoc_reqs++; + if (amd_chipset.isoc_reqs > 1) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + } else { + amd_chipset.isoc_reqs--; + if (amd_chipset.isoc_reqs > 0) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + } + + if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) { + outb_p(AB_REG_BAR_LOW, 0xcd6); + addr_low = inb_p(0xcd7); + outb_p(AB_REG_BAR_HIGH, 0xcd6); + addr_high = inb_p(0xcd7); + addr = addr_high << 8 | addr_low; + + outl_p(0x30, AB_INDX(addr)); + outl_p(0x40, AB_DATA(addr)); + outl_p(0x34, AB_INDX(addr)); + val = inl_p(AB_DATA(addr)); + } else if (amd_chipset.sb_type == 3) { + pci_read_config_dword(amd_chipset.smbus_dev, + AB_REG_BAR_SB700, &addr); + outl(AX_INDXC, AB_INDX(addr)); + outl(0x40, AB_DATA(addr)); + outl(AX_DATAC, AB_INDX(addr)); + val = inl(AB_DATA(addr)); + } else { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + + if (disable) { + val &= ~0x08; + val |= (1 << 4) | (1 << 9); + } else { + val |= 0x08; + val &= ~((1 << 4) | (1 << 9)); + } + outl_p(val, AB_DATA(addr)); + + if (!amd_chipset.nb_dev) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + + if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) { + addr = PCIE_P_CNTL; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + + val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12)); + val |= bit | (bit << 3) | (bit << 12); + val |= ((!bit) << 4) | ((!bit) << 9); + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + + addr = BIF_NB; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + val &= ~(1 << 8); + val |= bit << 8; + + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + } else if (amd_chipset.nb_type == 2) { + addr = NB_PIF0_PWRDOWN_0; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + if (disable) + val &= ~(0x3f << 7); + else + val |= 0x3f << 7; + + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + + addr = NB_PIF0_PWRDOWN_1; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + if (disable) + val &= ~(0x3f << 7); + else + val |= 0x3f << 7; + + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + } + + spin_unlock_irqrestore(&amd_lock, flags); + return; +} + +void usb_amd_quirk_pll_disable(void) +{ + usb_amd_quirk_pll(1); +} +EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable); + +void usb_amd_quirk_pll_enable(void) +{ + usb_amd_quirk_pll(0); +} +EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable); + +void usb_amd_dev_put(void) +{ + unsigned long flags; + + spin_lock_irqsave(&amd_lock, flags); + + amd_chipset.probe_count--; + if (amd_chipset.probe_count > 0) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + + if (amd_chipset.nb_dev) { + pci_dev_put(amd_chipset.nb_dev); + amd_chipset.nb_dev = NULL; + } + if (amd_chipset.smbus_dev) { + pci_dev_put(amd_chipset.smbus_dev); + amd_chipset.smbus_dev = NULL; + } + amd_chipset.nb_type = 0; + amd_chipset.sb_type = 0; + amd_chipset.isoc_reqs = 0; + amd_chipset.probe_result = 0; + + spin_unlock_irqrestore(&amd_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_amd_dev_put); /* * Make sure the controller is completely inactive, unable to diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 1564edf..6ae9f78 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -1,7 +1,17 @@ #ifndef __LINUX_USB_PCI_QUIRKS_H #define __LINUX_USB_PCI_QUIRKS_H +#ifdef CONFIG_PCI void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); +int usb_amd_find_chipset_info(void); +void usb_amd_dev_put(void); +void usb_amd_quirk_pll_disable(void); +void usb_amd_quirk_pll_enable(void); +#else +static inline void usb_amd_quirk_pll_disable(void) {} +static inline void usb_amd_quirk_pll_enable(void) {} +static inline void usb_amd_dev_put(void) {} +#endif /* CONFIG_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 3076b1c..db6f8b9 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2150,8 +2150,9 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597, desc->bDescLength = 9; desc->bPwrOn2PwrGood = 0; desc->wHubCharacteristics = cpu_to_le16(0x0011); - desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1; - desc->bitmap[1] = ~0; + desc->u.hs.DeviceRemovable[0] = + ((1 << r8a66597->max_root_hub) - 1) << 1; + desc->u.hs.DeviceRemovable[1] = ~0; } static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 2e9602a..18b7099 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1111,9 +1111,9 @@ sl811h_hub_descriptor ( desc->wHubCharacteristics = cpu_to_le16(temp); - /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = 0 << 1; - desc->bitmap[1] = ~0; + /* ports removable, and legacy PortPwrCtrlMask */ + desc->u.hs.DeviceRemovable[0] = 0 << 1; + desc->u.hs.DeviceRemovable[1] = ~0; } static void diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index fab7649..b478593 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2604,13 +2604,14 @@ static int u132_roothub_descriptor(struct u132 *u132, retval = u132_read_pcimem(u132, roothub.b, &rh_b); if (retval) return retval; - memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); - desc->bitmap[0] = rh_b & RH_B_DR; + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + desc->u.hs.DeviceRemovable[0] = rh_b & RH_B_DR; if (u132->num_ports > 7) { - desc->bitmap[1] = (rh_b & RH_B_DR) >> 8; - desc->bitmap[2] = 0xff; + desc->u.hs.DeviceRemovable[1] = (rh_b & RH_B_DR) >> 8; + desc->u.hs.DeviceRemovable[2] = 0xff; } else - desc->bitmap[1] = 0xff; + desc->u.hs.DeviceRemovable[1] = 0xff; return 0; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index cee8678..4f65b14 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -471,7 +471,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) /* * Store the current frame number in uhci->frame_number if the controller - * is runnning. Expand from 11 bits (of which we use only 10) to a + * is running. Expand from 11 bits (of which we use only 10) to a * full-sized integer. * * Like many other parts of the driver, this code relies on being polled diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index fcbf4ab..0231814 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -169,9 +169,10 @@ static void xhci_print_ports(struct xhci_hcd *xhci) } } -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num) +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) { - void *addr; + struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num]; + void __iomem *addr; u32 temp; u64 temp_64; @@ -449,7 +450,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, } } -void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) +static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; @@ -488,7 +489,7 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) dbg_rsvd64(xhci, (u64 *)slot_ctx, dma); } -void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, +static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep) { diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index 78c4eda..ce5c9e5 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -19,8 +19,8 @@ * along with this program; if not, write to the Free Software Foundation, * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* Up to 16 microframes to halt an HC - one microframe is 125 microsectonds */ -#define XHCI_MAX_HALT_USEC (16*125) +/* Up to 16 ms to halt an HC */ +#define XHCI_MAX_HALT_USEC (16*1000) /* HC not running - set to 1 when run/stop bit is cleared. */ #define XHCI_STS_HALT (1<<0) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5d963e3..a78f2eb 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -28,27 +28,15 @@ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ PORT_RC | PORT_PLC | PORT_PE) -static void xhci_hub_descriptor(struct xhci_hcd *xhci, - struct usb_hub_descriptor *desc) +static void xhci_common_hub_descriptor(struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc, int ports) { - int ports; u16 temp; - ports = HCS_MAX_PORTS(xhci->hcs_params1); - - /* USB 3.0 hubs have a different descriptor, but we fake this for now */ - desc->bDescriptorType = 0x29; desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */ desc->bHubContrCurrent = 0; desc->bNbrPorts = ports; - temp = 1 + (ports / 8); - desc->bDescLength = 7 + 2 * temp; - - /* Why does core/hcd.h define bitmap? It's just confusing. */ - memset(&desc->DeviceRemovable[0], 0, temp); - memset(&desc->DeviceRemovable[temp], 0xff, temp); - /* Ugh, these should be #defines, FIXME */ /* Using table 11-13 in USB 2.0 spec. */ temp = 0; @@ -65,14 +53,108 @@ static void xhci_hub_descriptor(struct xhci_hcd *xhci, desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp); } +/* Fill in the USB 2.0 roothub descriptor */ +static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 temp; + __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; + u32 portsc; + unsigned int i; + + ports = xhci->num_usb2_ports; + + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = 0x29; + temp = 1 + (ports / 8); + desc->bDescLength = 7 + 2 * temp; + + /* The Device Removable bits are reported on a byte granularity. + * If the port doesn't exist within that byte, the bit is set to 0. + */ + memset(port_removable, 0, sizeof(port_removable)); + for (i = 0; i < ports; i++) { + portsc = xhci_readl(xhci, xhci->usb3_ports[i]); + /* If a device is removable, PORTSC reports a 0, same as in the + * hub descriptor DeviceRemovable bits. + */ + if (portsc & PORT_DEV_REMOVE) + /* This math is hairy because bit 0 of DeviceRemovable + * is reserved, and bit 1 is for port 1, etc. + */ + port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8); + } + + /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN + * ports on it. The USB 2.0 specification says that there are two + * variable length fields at the end of the hub descriptor: + * DeviceRemovable and PortPwrCtrlMask. But since we can have less than + * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array + * to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to + * 0xFF, so we initialize the both arrays (DeviceRemovable and + * PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each + * set of ports that actually exist. + */ + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + memset(desc->u.hs.PortPwrCtrlMask, 0xff, + sizeof(desc->u.hs.PortPwrCtrlMask)); + + for (i = 0; i < (ports + 1 + 7) / 8; i++) + memset(&desc->u.hs.DeviceRemovable[i], port_removable[i], + sizeof(__u8)); +} + +/* Fill in the USB 3.0 roothub descriptor */ +static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 port_removable; + u32 portsc; + unsigned int i; + + ports = xhci->num_usb3_ports; + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = 0x2a; + desc->bDescLength = 12; + + /* header decode latency should be zero for roothubs, + * see section 4.23.5.2. + */ + desc->u.ss.bHubHdrDecLat = 0; + desc->u.ss.wHubDelay = 0; + + port_removable = 0; + /* bit 0 is reserved, bit 1 is for port 1, etc. */ + for (i = 0; i < ports; i++) { + portsc = xhci_readl(xhci, xhci->usb3_ports[i]); + if (portsc & PORT_DEV_REMOVE) + port_removable |= 1 << (i + 1); + } + memset(&desc->u.ss.DeviceRemovable, + (__force __u16) cpu_to_le16(port_removable), + sizeof(__u16)); +} + +static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + + if (hcd->speed == HCD_USB3) + xhci_usb3_hub_descriptor(hcd, xhci, desc); + else + xhci_usb2_hub_descriptor(hcd, xhci, desc); + +} + static unsigned int xhci_port_speed(unsigned int port_status) { if (DEV_LOWSPEED(port_status)) return USB_PORT_STAT_LOW_SPEED; if (DEV_HIGHSPEED(port_status)) return USB_PORT_STAT_HIGH_SPEED; - if (DEV_SUPERSPEED(port_status)) - return USB_PORT_STAT_SUPER_SPEED; /* * FIXME: Yes, we should check for full speed, but the core uses that as * a default in portspeed() in usb/core/hub.c (which is the only place @@ -135,17 +217,22 @@ u32 xhci_port_state_to_neutral(u32 state) /* * find slot id based on port number. + * @port: The one-based port number from one of the two split roothubs. */ -int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port) +int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 port) { int slot_id; int i; + enum usb_device_speed speed; slot_id = 0; for (i = 0; i < MAX_HC_SLOTS; i++) { if (!xhci->devs[i]) continue; - if (xhci->devs[i]->port == port) { + speed = xhci->devs[i]->udev->speed; + if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3)) + && xhci->devs[i]->port == port) { slot_id = i; break; } @@ -226,11 +313,11 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) return; } -static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, - u32 __iomem *addr, u32 port_status) +static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 wIndex, u32 __iomem *addr, u32 port_status) { /* Don't allow the USB core to disable SuperSpeed ports. */ - if (xhci->port_array[wIndex] == 0x03) { + if (hcd->speed == HCD_USB3) { xhci_dbg(xhci, "Ignoring request to disable " "SuperSpeed port.\n"); return; @@ -289,10 +376,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, unsigned long flags; u32 temp, temp1, status; int retval = 0; - u32 __iomem *addr; + u32 __iomem **port_array; int slot_id; - - ports = HCS_MAX_PORTS(xhci->hcs_params1); + struct xhci_bus_state *bus_state; + + if (hcd->speed == HCD_USB3) { + ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + } else { + ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); switch (typeReq) { @@ -301,17 +396,35 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, memset(buf, 0, 4); break; case GetHubDescriptor: - xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf); + /* Check to make sure userspace is asking for the USB 3.0 hub + * descriptor for the USB 3.0 roothub. If not, we stall the + * endpoint, like external hubs do. + */ + if (hcd->speed == HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + xhci_dbg(xhci, "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + xhci_hub_descriptor(hcd, xhci, + (struct usb_hub_descriptor *) buf); break; case GetPortStatus: if (!wIndex || wIndex > ports) goto error; wIndex--; status = 0; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp); + /* FIXME - should we return a port status value like the USB + * 3.0 external hubs do? + */ /* wPortChange bits */ if (temp & PORT_CSC) status |= USB_PORT_STAT_C_CONNECTION << 16; @@ -330,38 +443,33 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if ((temp & PORT_RESET) || !(temp & PORT_PE)) goto error; if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies, - xhci->resume_done[wIndex])) { + bus_state->resume_done[wIndex])) { xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); - xhci->resume_done[wIndex] = 0; + bus_state->resume_done[wIndex] = 0; temp1 = xhci_port_state_to_neutral(temp); temp1 &= ~PORT_PLS_MASK; temp1 |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp1, addr); + xhci_writel(xhci, temp1, port_array[wIndex]); xhci_dbg(xhci, "set port %d resume\n", wIndex + 1); - slot_id = xhci_find_slot_id_by_port(xhci, + slot_id = xhci_find_slot_id_by_port(hcd, xhci, wIndex + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto error; } xhci_ring_device(xhci, slot_id); - xhci->port_c_suspend[wIndex >> 5] |= - 1 << (wIndex & 31); - xhci->suspended_ports[wIndex >> 5] &= - ~(1 << (wIndex & 31)); + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); } } if ((temp & PORT_PLS_MASK) == XDEV_U0 && (temp & PORT_POWER) - && (xhci->suspended_ports[wIndex >> 5] & - (1 << (wIndex & 31)))) { - xhci->suspended_ports[wIndex >> 5] &= - ~(1 << (wIndex & 31)); - xhci->port_c_suspend[wIndex >> 5] |= - 1 << (wIndex & 31); + && (bus_state->suspended_ports & (1 << wIndex))) { + bus_state->suspended_ports &= ~(1 << wIndex); + bus_state->port_c_suspend |= 1 << wIndex; } if (temp & PORT_CONNECT) { status |= USB_PORT_STAT_CONNECTION; @@ -375,7 +483,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) status |= USB_PORT_STAT_POWER; - if (xhci->port_c_suspend[wIndex >> 5] & (1 << (wIndex & 31))) + if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; xhci_dbg(xhci, "Get port status returned 0x%x\n", status); put_unaligned(cpu_to_le32(status), (__le32 *) buf); @@ -385,12 +493,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > ports) goto error; wIndex--; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } temp = xhci_port_state_to_neutral(temp); + /* FIXME: What new port features do we need to support? */ switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); /* In spec software should not attempt to suspend * a port unless the port reports that it is in the * enabled (PED = ‘1’,PLS < ‘3’) state. @@ -402,7 +514,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } - slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); if (!slot_id) { xhci_warn(xhci, "slot_id is zero\n"); goto error; @@ -415,15 +528,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U3; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[wIndex]); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_readl(xhci, addr); - xhci->suspended_ports[wIndex >> 5] |= - 1 << (wIndex & (31)); + temp = xhci_readl(xhci, port_array[wIndex]); + bus_state->suspended_ports |= 1 << wIndex; break; case USB_PORT_FEAT_POWER: /* @@ -432,34 +544,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * However, khubd will ignore the roothub events until * the roothub is registered. */ - xhci_writel(xhci, temp | PORT_POWER, addr); + xhci_writel(xhci, temp | PORT_POWER, + port_array[wIndex]); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[wIndex]); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; default: goto error; } - temp = xhci_readl(xhci, addr); /* unblock any posted writes */ + /* unblock any posted writes */ + temp = xhci_readl(xhci, port_array[wIndex]); break; case ClearPortFeature: if (!wIndex || wIndex > ports) goto error; wIndex--; - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } + /* FIXME: What new port features do we need to support? */ temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) @@ -471,30 +588,34 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); - xhci_readl(xhci, addr); + xhci_writel(xhci, temp, + port_array[wIndex]); + xhci_readl(xhci, port_array[wIndex]); } else { temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_RESUME; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, + port_array[wIndex]); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, + port_array[wIndex]); temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, + port_array[wIndex]); } - xhci->port_c_suspend[wIndex >> 5] |= - 1 << (wIndex & 31); + bus_state->port_c_suspend |= 1 << wIndex; } - slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto error; @@ -502,17 +623,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_ring_device(xhci, slot_id); break; case USB_PORT_FEAT_C_SUSPEND: - xhci->port_c_suspend[wIndex >> 5] &= - ~(1 << (wIndex & 31)); + bus_state->port_c_suspend &= ~(1 << wIndex); case USB_PORT_FEAT_C_RESET: case USB_PORT_FEAT_C_CONNECTION: case USB_PORT_FEAT_C_OVER_CURRENT: case USB_PORT_FEAT_C_ENABLE: xhci_clear_port_change_bit(xhci, wValue, wIndex, - addr, temp); + port_array[wIndex], temp); break; case USB_PORT_FEAT_ENABLE: - xhci_disable_port(xhci, wIndex, addr, temp); + xhci_disable_port(hcd, xhci, wIndex, + port_array[wIndex], temp); break; default: goto error; @@ -543,9 +664,17 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int i, retval; struct xhci_hcd *xhci = hcd_to_xhci(hcd); int ports; - u32 __iomem *addr; - - ports = HCS_MAX_PORTS(xhci->hcs_params1); + u32 __iomem **port_array; + struct xhci_bus_state *bus_state; + + if (hcd->speed == HCD_USB3) { + ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + } else { + ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; /* Initial status is no changes */ retval = (ports + 8) / 8; @@ -557,13 +686,15 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < ports; i++) { - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[i]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } if ((temp & mask) != 0 || - (xhci->port_c_suspend[i >> 5] & 1 << (i & 31)) || - (xhci->resume_done[i] && time_after_eq( - jiffies, xhci->resume_done[i]))) { + (bus_state->port_c_suspend & 1 << i) || + (bus_state->resume_done[i] && time_after_eq( + jiffies, bus_state->resume_done[i]))) { buf[(i + 1) / 8] |= 1 << (i + 1) % 8; status = 1; } @@ -577,42 +708,51 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int xhci_bus_suspend(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int port; + int max_ports, port_index; + u32 __iomem **port_array; + struct xhci_bus_state *bus_state; unsigned long flags; - xhci_dbg(xhci, "suspend root hub\n"); + if (hcd->speed == HCD_USB3) { + max_ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + xhci_dbg(xhci, "suspend USB 3.0 root hub\n"); + } else { + max_ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + xhci_dbg(xhci, "suspend USB 2.0 root hub\n"); + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); if (hcd->self.root_hub->do_remote_wakeup) { - port = HCS_MAX_PORTS(xhci->hcs_params1); - while (port--) { - if (xhci->resume_done[port] != 0) { + port_index = max_ports; + while (port_index--) { + if (bus_state->resume_done[port_index] != 0) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "suspend failed because " "port %d is resuming\n", - port + 1); + port_index + 1); return -EBUSY; } } } - port = HCS_MAX_PORTS(xhci->hcs_params1); - xhci->bus_suspended = 0; - while (port--) { + port_index = max_ports; + bus_state->bus_suspended = 0; + while (port_index--) { /* suspend the port if the port is not suspended */ - u32 __iomem *addr; u32 t1, t2; int slot_id; - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS * (port & 0xff); - t1 = xhci_readl(xhci, addr); + t1 = xhci_readl(xhci, port_array[port_index]); t2 = xhci_port_state_to_neutral(t1); if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { - xhci_dbg(xhci, "port %d not suspended\n", port); - slot_id = xhci_find_slot_id_by_port(xhci, port + 1); + xhci_dbg(xhci, "port %d not suspended\n", port_index); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); if (slot_id) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_stop_device(xhci, slot_id, 1); @@ -620,7 +760,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) } t2 &= ~PORT_PLS_MASK; t2 |= PORT_LINK_STROBE | XDEV_U3; - set_bit(port, &xhci->bus_suspended); + set_bit(port_index, &bus_state->bus_suspended); } if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { @@ -635,22 +775,24 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - xhci_writel(xhci, t2, addr); + xhci_writel(xhci, t2, port_array[port_index]); if (DEV_HIGHSPEED(t1)) { /* enable remote wake up for USB 2.0 */ u32 __iomem *addr; u32 tmp; - addr = &xhci->op_regs->port_power_base + - NUM_PORT_REGS * (port & 0xff); + /* Add one to the port status register address to get + * the port power control register address. + */ + addr = port_array[port_index] + 1; tmp = xhci_readl(xhci, addr); tmp |= PORT_RWE; xhci_writel(xhci, tmp, addr); } } hcd->state = HC_STATE_SUSPENDED; - xhci->next_statechange = jiffies + msecs_to_jiffies(10); + bus_state->next_statechange = jiffies + msecs_to_jiffies(10); spin_unlock_irqrestore(&xhci->lock, flags); return 0; } @@ -658,13 +800,24 @@ int xhci_bus_suspend(struct usb_hcd *hcd) int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int port; + int max_ports, port_index; + u32 __iomem **port_array; + struct xhci_bus_state *bus_state; u32 temp; unsigned long flags; - xhci_dbg(xhci, "resume root hub\n"); + if (hcd->speed == HCD_USB3) { + max_ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + xhci_dbg(xhci, "resume USB 3.0 root hub\n"); + } else { + max_ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + xhci_dbg(xhci, "resume USB 2.0 root hub\n"); + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; - if (time_before(jiffies, xhci->next_statechange)) + if (time_before(jiffies, bus_state->next_statechange)) msleep(5); spin_lock_irqsave(&xhci->lock, flags); @@ -678,57 +831,57 @@ int xhci_bus_resume(struct usb_hcd *hcd) temp &= ~CMD_EIE; xhci_writel(xhci, temp, &xhci->op_regs->command); - port = HCS_MAX_PORTS(xhci->hcs_params1); - while (port--) { + port_index = max_ports; + while (port_index--) { /* Check whether need resume ports. If needed resume port and disable remote wakeup */ - u32 __iomem *addr; u32 temp; int slot_id; - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS * (port & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[port_index]); if (DEV_SUPERSPEED(temp)) temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); else temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); - if (test_bit(port, &xhci->bus_suspended) && + if (test_bit(port_index, &bus_state->bus_suspended) && (temp & PORT_PLS_MASK)) { if (DEV_SUPERSPEED(temp)) { temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); } else { temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_RESUME; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[port_index]); temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); } - slot_id = xhci_find_slot_id_by_port(xhci, port + 1); + slot_id = xhci_find_slot_id_by_port(hcd, + xhci, port_index + 1); if (slot_id) xhci_ring_device(xhci, slot_id); } else - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); if (DEV_HIGHSPEED(temp)) { /* disable remote wake up for USB 2.0 */ u32 __iomem *addr; u32 tmp; - addr = &xhci->op_regs->port_power_base + - NUM_PORT_REGS * (port & 0xff); + /* Add one to the port status register address to get + * the port power control register address. + */ + addr = port_array[port_index] + 1; tmp = xhci_readl(xhci, addr); tmp &= ~PORT_RWE; xhci_writel(xhci, tmp, addr); @@ -737,8 +890,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) (void) xhci_readl(xhci, &xhci->op_regs->command); - xhci->next_statechange = jiffies + msecs_to_jiffies(5); - hcd->state = HC_STATE_RUNNING; + bus_state->next_statechange = jiffies + msecs_to_jiffies(5); /* re-enable irqs */ temp = xhci_readl(xhci, &xhci->op_regs->command); temp |= CMD_EIE; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1d0f45f..a003e79 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -307,7 +307,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, /***************** Streams structures manipulation *************************/ -void xhci_free_stream_ctx(struct xhci_hcd *xhci, +static void xhci_free_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { @@ -335,7 +335,7 @@ void xhci_free_stream_ctx(struct xhci_hcd *xhci, * The stream context array must be a power of 2, and can be as small as * 64 bytes or as large as 1MB. */ -struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, +static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, dma_addr_t *dma, gfp_t mem_flags) { @@ -814,14 +814,64 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, ep0_ctx->deq |= ep_ring->cycle_state; } +/* + * The xHCI roothub may have ports of differing speeds in any order in the port + * status registers. xhci->port_array provides an array of the port speed for + * each offset into the port status registers. + * + * The xHCI hardware wants to know the roothub port number that the USB device + * is attached to (or the roothub port its ancestor hub is attached to). All we + * know is the index of that port under either the USB 2.0 or the USB 3.0 + * roothub, but that doesn't give us the real index into the HW port status + * registers. Scan through the xHCI roothub port array, looking for the Nth + * entry of the correct port speed. Return the port number of that entry. + */ +static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, + struct usb_device *udev) +{ + struct usb_device *top_dev; + unsigned int num_similar_speed_ports; + unsigned int faked_port_num; + int i; + + for (top_dev = udev; top_dev->parent && top_dev->parent->parent; + top_dev = top_dev->parent) + /* Found device below root hub */; + faked_port_num = top_dev->portnum; + for (i = 0, num_similar_speed_ports = 0; + i < HCS_MAX_PORTS(xhci->hcs_params1); i++) { + u8 port_speed = xhci->port_array[i]; + + /* + * Skip ports that don't have known speeds, or have duplicate + * Extended Capabilities port speed entries. + */ + if (port_speed == 0 || port_speed == -1) + continue; + + /* + * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and + * 1.1 ports are under the USB 2.0 hub. If the port speed + * matches the device speed, it's a similar speed port. + */ + if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER)) + num_similar_speed_ports++; + if (num_similar_speed_ports == faked_port_num) + /* Roothub ports are numbered from 1 to N */ + return i+1; + } + return 0; +} + /* Setup an xHCI virtual device for a Set Address command */ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev) { struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; - struct usb_device *top_dev; struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; + u32 port_num; + struct usb_device *top_dev; dev = xhci->devs[udev->slot_id]; /* Slot ID 0 is reserved */ @@ -863,16 +913,20 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud BUG(); } /* Find the root hub port this device is under */ + port_num = xhci_find_real_port_number(xhci, udev); + if (!port_num) + return -EINVAL; + slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(port_num); + /* Set the port number in the virtual_device to the faked port number */ for (top_dev = udev; top_dev->parent && top_dev->parent->parent; top_dev = top_dev->parent) /* Found device below root hub */; - slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum); dev->port = top_dev->portnum; - xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum); + xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num); + xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port); - /* Is this a LS/FS device under a HS hub? */ - if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) && - udev->tt) { + /* Is this a LS/FS device under an external HS hub? */ + if (udev->tt && udev->tt->hub->parent) { slot_ctx->tt_info = udev->tt->hub->slot_id; slot_ctx->tt_info |= udev->ttport << 8; if (udev->tt->multi) @@ -1452,7 +1506,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->page_size = 0; xhci->page_shift = 0; - xhci->bus_suspended = 0; + xhci->bus_state[0].bus_suspended = 0; + xhci->bus_state[1].bus_suspended = 0; } static int xhci_test_trb_in_td(struct xhci_hcd *xhci, @@ -1748,6 +1803,20 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) } xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n", xhci->num_usb2_ports, xhci->num_usb3_ports); + + /* Place limits on the number of roothub ports so that the hub + * descriptors aren't longer than the USB core will allocate. + */ + if (xhci->num_usb3_ports > 15) { + xhci_dbg(xhci, "Limiting USB 3.0 roothub ports to 15.\n"); + xhci->num_usb3_ports = 15; + } + if (xhci->num_usb2_ports > USB_MAXCHILDREN) { + xhci_dbg(xhci, "Limiting USB 2.0 roothub ports to %u.\n", + USB_MAXCHILDREN); + xhci->num_usb2_ports = USB_MAXCHILDREN; + } + /* * Note we could have all USB 3.0 ports, or all USB 2.0 ports. * Not sure how the USB core will handle a hub with no ports... @@ -1772,6 +1841,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) "addr = %p\n", i, xhci->usb2_ports[port_index]); port_index++; + if (port_index == xhci->num_usb2_ports) + break; } } if (xhci->num_usb3_ports) { @@ -1790,6 +1861,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) "addr = %p\n", i, xhci->usb3_ports[port_index]); port_index++; + if (port_index == xhci->num_usb3_ports) + break; } } return 0; @@ -1900,11 +1973,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) val &= DBOFF_MASK; xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x" " from cap regs base addr\n", val); - xhci->dba = (void *) xhci->cap_regs + val; + xhci->dba = (void __iomem *) xhci->cap_regs + val; xhci_dbg_regs(xhci); xhci_print_run_regs(xhci); /* Set ir_set to interrupt register set 0 */ - xhci->ir_set = (void *) xhci->run_regs->ir_set; + xhci->ir_set = &xhci->run_regs->ir_set[0]; /* * Event ring setup: Allocate a normal ring, but also setup @@ -1961,7 +2034,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n"); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); /* * XXX: Might need to set the Interrupter Moderation Register to @@ -1971,8 +2044,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) init_completion(&xhci->addr_dev); for (i = 0; i < MAX_HC_SLOTS; ++i) xhci->devs[i] = NULL; - for (i = 0; i < MAX_HC_PORTS; ++i) - xhci->resume_done[i] = 0; + for (i = 0; i < USB_MAXCHILDREN; ++i) { + xhci->bus_state[0].resume_done[i] = 0; + xhci->bus_state[1].resume_done[i] = 0; + } if (scratchpad_alloc(xhci, flags)) goto fail; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index bb668a8..ceea9f3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -50,13 +50,45 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_hcd *xhci; struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval; u32 temp; hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; + if (usb_hcd_is_primary_hcd(hcd)) { + xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); + if (!xhci) + return -ENOMEM; + *((struct xhci_hcd **) hcd->hcd_priv) = xhci; + xhci->main_hcd = hcd; + /* Mark the first roothub as being USB 2.0. + * The xHCI driver will register the USB 3.0 roothub. + */ + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_HIGH; + /* + * USB 2.0 roothub under xHCI has an integrated TT, + * (rate matching hub) as opposed to having an OHCI/UHCI + * companion controller. + */ + hcd->has_tt = 1; + } else { + /* xHCI private pointer was set in xhci_pci_probe for the second + * registered roothub. + */ + xhci = hcd_to_xhci(hcd); + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); + } else { + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); + } + return 0; + } + xhci->cap_regs = hcd->regs; xhci->op_regs = hcd->regs + HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase)); @@ -85,13 +117,13 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) - return retval; + goto error; xhci_dbg(xhci, "Resetting HCD\n"); /* Reset the internal HC memory state and registers. */ retval = xhci_reset(xhci); if (retval) - return retval; + goto error; xhci_dbg(xhci, "Reset complete\n"); temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); @@ -106,14 +138,85 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* Initialize HCD and host controller data structures. */ retval = xhci_init(hcd); if (retval) - return retval; + goto error; xhci_dbg(xhci, "Called HCD init\n"); pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); /* Find any debug ports */ - return xhci_pci_reinit(xhci, pdev); + retval = xhci_pci_reinit(xhci, pdev); + if (!retval) + return retval; + +error: + kfree(xhci); + return retval; +} + +/* + * We need to register our own PCI probe function (instead of the USB core's + * function) in order to create a second roothub under xHCI. + */ +static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + struct xhci_hcd *xhci; + struct hc_driver *driver; + struct usb_hcd *hcd; + + driver = (struct hc_driver *)id->driver_data; + /* Register the USB 2.0 roothub. + * FIXME: USB core must know to register the USB 2.0 roothub first. + * This is sort of silly, because we could just set the HCD driver flags + * to say USB 2.0, but I'm not sure what the implications would be in + * the other parts of the HCD code. + */ + retval = usb_hcd_pci_probe(dev, id); + + if (retval) + return retval; + + /* USB 2.0 roothub is stored in the PCI device now. */ + hcd = dev_get_drvdata(&dev->dev); + xhci = hcd_to_xhci(hcd); + xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, + pci_name(dev), hcd); + if (!xhci->shared_hcd) { + retval = -ENOMEM; + goto dealloc_usb2_hcd; + } + + /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset) + * is called by usb_add_hcd(). + */ + *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; + + retval = usb_add_hcd(xhci->shared_hcd, dev->irq, + IRQF_DISABLED | IRQF_SHARED); + if (retval) + goto put_usb3_hcd; + /* Roothub already marked as USB 3.0 speed */ + return 0; + +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); +dealloc_usb2_hcd: + usb_hcd_pci_remove(dev); + return retval; +} + +static void xhci_pci_remove(struct pci_dev *dev) +{ + struct xhci_hcd *xhci; + + xhci = hcd_to_xhci(pci_get_drvdata(dev)); + if (xhci->shared_hcd) { + usb_remove_hcd(xhci->shared_hcd); + usb_put_hcd(xhci->shared_hcd); + } + usb_hcd_pci_remove(dev); + kfree(xhci); } #ifdef CONFIG_PM @@ -122,7 +225,8 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int retval = 0; - if (hcd->state != HC_STATE_SUSPENDED) + if (hcd->state != HC_STATE_SUSPENDED || + xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; retval = xhci_suspend(xhci); @@ -143,13 +247,13 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) static const struct hc_driver xhci_pci_hc_driver = { .description = hcd_name, .product_desc = "xHCI Host Controller", - .hcd_priv_size = sizeof(struct xhci_hcd), + .hcd_priv_size = sizeof(struct xhci_hcd *), /* * generic hardware linkage */ .irq = xhci_irq, - .flags = HCD_MEMORY | HCD_USB3, + .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, /* * basic lifecycle operations @@ -210,8 +314,8 @@ static struct pci_driver xhci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, - .probe = usb_hcd_pci_probe, - .remove = usb_hcd_pci_remove, + .probe = xhci_pci_probe, + .remove = xhci_pci_remove, /* suspend and resume implemented later */ .shutdown = usb_hcd_pci_shutdown, diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3e8211c..cfc1ad9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -380,10 +380,8 @@ static struct xhci_segment *find_trb_seg( while (cur_seg->trbs > trb || &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) { generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic; - if ((generic_trb->field[3] & TRB_TYPE_BITMASK) == - TRB_TYPE(TRB_LINK) && - (generic_trb->field[3] & LINK_TOGGLE)) - *cycle_state = ~(*cycle_state) & 0x1; + if (generic_trb->field[3] & LINK_TOGGLE) + *cycle_state ^= 0x1; cur_seg = cur_seg->next; if (cur_seg == start_seg) /* Looped over the entire list. Oops! */ @@ -474,8 +472,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(cur_td->start_seg, dev->eps[ep_index].stopped_trb, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } + /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg(xhci, "Finding endpoint context\n"); ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); @@ -486,24 +487,37 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(state->new_deq_seg, state->new_deq_ptr, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } trb = &state->new_deq_ptr->generic; if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) && (trb->field[3] & LINK_TOGGLE)) - state->new_cycle_state = ~(state->new_cycle_state) & 0x1; + state->new_cycle_state ^= 0x1; next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr); + /* + * If there is only one segment in a ring, find_trb_seg()'s while loop + * will not run, and it will return before it has a chance to see if it + * needs to toggle the cycle bit. It can't tell if the stalled transfer + * ended just before the link TRB on a one-segment ring, or if the TD + * wrapped around the top of the ring, because it doesn't have the TD in + * question. Look for the one-segment case where stalled TRB's address + * is greater than the new dequeue pointer address. + */ + if (ep_ring->first_seg == ep_ring->first_seg->next && + state->new_deq_ptr < dev->eps[ep_index].stopped_trb) + state->new_cycle_state ^= 0x1; + xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state); + /* Don't update the ring cycle state for the producer (us). */ xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n", state->new_deq_seg); addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr); xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n", (unsigned long long) addr); - xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n"); - ep_ring->dequeue = state->new_deq_ptr; - ep_ring->deq_seg = state->new_deq_seg; } static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, @@ -594,13 +608,14 @@ static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, struct xhci_td *cur_td, int status, char *adjective) { - struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct usb_hcd *hcd; struct urb *urb; struct urb_priv *urb_priv; urb = cur_td->urb; urb_priv = urb->hcpriv; urb_priv->td_cnt++; + hcd = bus_to_hcd(urb->dev->bus); /* Only giveback urb when this is the last td in urb */ if (urb_priv->td_cnt == urb_priv->length) { @@ -819,8 +834,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) if (ret < 0) { /* This is bad; the host is not responding to commands and it's * not allowing itself to be halted. At least interrupts are - * disabled, so we can set HC_STATE_HALT and notify the - * USB core. But if we call usb_hc_died(), it will attempt to + * disabled. If we call usb_hc_died(), it will attempt to * disconnect all device drivers under this host. Those * disconnect() methods will wait for all URBs to be unlinked, * so we must complete them. @@ -865,9 +879,8 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) } } spin_unlock(&xhci->lock); - xhci_to_hcd(xhci)->state = HC_STATE_HALT; xhci_dbg(xhci, "Calling usb_hc_died()\n"); - usb_hc_died(xhci_to_hcd(xhci)); + usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); } @@ -946,9 +959,26 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, } else { xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n", ep_ctx->deq); + if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg, + dev->eps[ep_index].queued_deq_ptr) == + (ep_ctx->deq & ~(EP_CTX_CYCLE_MASK))) { + /* Update the ring's dequeue segment and dequeue pointer + * to reflect the new position. + */ + ep_ring->deq_seg = dev->eps[ep_index].queued_deq_seg; + ep_ring->dequeue = dev->eps[ep_index].queued_deq_ptr; + } else { + xhci_warn(xhci, "Mismatch between completed Set TR Deq " + "Ptr command & xHCI internal state.\n"); + xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n", + dev->eps[ep_index].queued_deq_seg, + dev->eps[ep_index].queued_deq_ptr); + } } dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; + dev->eps[ep_index].queued_deq_seg = NULL; + dev->eps[ep_index].queued_deq_ptr = NULL; /* Restart any rings with pending URBs */ ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } @@ -1113,7 +1143,6 @@ bandwidth_change: handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue); break; case TRB_TYPE(TRB_CMD_NOOP): - ++xhci->noops_handled; break; case TRB_TYPE(TRB_RESET_EP): handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue); @@ -1157,15 +1186,55 @@ static void handle_vendor_event(struct xhci_hcd *xhci, handle_cmd_completion(xhci, &event->event_cmd); } +/* @port_id: the one-based port ID from the hardware (indexed from array of all + * port registers -- USB 3.0 and USB 2.0). + * + * Returns a zero-based port number, which is suitable for indexing into each of + * the split roothubs' port arrays and bus state arrays. + */ +static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, + struct xhci_hcd *xhci, u32 port_id) +{ + unsigned int i; + unsigned int num_similar_speed_ports = 0; + + /* port_id from the hardware is 1-based, but port_array[], usb3_ports[], + * and usb2_ports are 0-based indexes. Count the number of similar + * speed ports, up to 1 port before this port. + */ + for (i = 0; i < (port_id - 1); i++) { + u8 port_speed = xhci->port_array[i]; + + /* + * Skip ports that don't have known speeds, or have duplicate + * Extended Capabilities port speed entries. + */ + if (port_speed == 0 || port_speed == -1) + continue; + + /* + * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and + * 1.1 ports are under the USB 2.0 hub. If the port speed + * matches the device speed, it's a similar speed port. + */ + if ((port_speed == 0x03) == (hcd->speed == HCD_USB3)) + num_similar_speed_ports++; + } + return num_similar_speed_ports; +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { - struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct usb_hcd *hcd; u32 port_id; u32 temp, temp1; - u32 __iomem *addr; - int ports; + int max_ports; int slot_id; + unsigned int faked_port_index; + u8 major_revision; + struct xhci_bus_state *bus_state; + u32 __iomem **port_array; /* Port status change events always have a successful completion code */ if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) { @@ -1175,14 +1244,50 @@ static void handle_port_status(struct xhci_hcd *xhci, port_id = GET_PORT_ID(event->generic.field[0]); xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id); - ports = HCS_MAX_PORTS(xhci->hcs_params1); - if ((port_id <= 0) || (port_id > ports)) { + max_ports = HCS_MAX_PORTS(xhci->hcs_params1); + if ((port_id <= 0) || (port_id > max_ports)) { xhci_warn(xhci, "Invalid port id %d\n", port_id); goto cleanup; } - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1); - temp = xhci_readl(xhci, addr); + /* Figure out which usb_hcd this port is attached to: + * is it a USB 3.0 port or a USB 2.0/1.1 port? + */ + major_revision = xhci->port_array[port_id - 1]; + if (major_revision == 0) { + xhci_warn(xhci, "Event for port %u not in " + "Extended Capabilities, ignoring.\n", + port_id); + goto cleanup; + } + if (major_revision == (u8) -1) { + xhci_warn(xhci, "Event for port %u duplicated in" + "Extended Capabilities, ignoring.\n", + port_id); + goto cleanup; + } + + /* + * Hardware port IDs reported by a Port Status Change Event include USB + * 3.0 and USB 2.0 ports. We want to check if the port has reported a + * resume event, but we first need to translate the hardware port ID + * into the index into the ports on the correct split roothub, and the + * correct bus_state structure. + */ + /* Find the right roothub. */ + hcd = xhci_to_hcd(xhci); + if ((major_revision == 0x03) != (hcd->speed == HCD_USB3)) + hcd = xhci->shared_hcd; + bus_state = &xhci->bus_state[hcd_index(hcd)]; + if (hcd->speed == HCD_USB3) + port_array = xhci->usb3_ports; + else + port_array = xhci->usb2_ports; + /* Find the faked port hub number */ + faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci, + port_id); + + temp = xhci_readl(xhci, port_array[faked_port_index]); if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); usb_hcd_resume_root_hub(hcd); @@ -1202,8 +1307,9 @@ static void handle_port_status(struct xhci_hcd *xhci, temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); - slot_id = xhci_find_slot_id_by_port(xhci, port_id); + xhci_writel(xhci, temp, port_array[faked_port_index]); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + faked_port_index); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto cleanup; @@ -1211,16 +1317,16 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_ring_device(xhci, slot_id); xhci_dbg(xhci, "resume SS port %d finished\n", port_id); /* Clear PORT_PLC */ - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[faked_port_index]); temp = xhci_port_state_to_neutral(temp); temp |= PORT_PLC; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[faked_port_index]); } else { xhci_dbg(xhci, "resume HS port %d\n", port_id); - xhci->resume_done[port_id - 1] = jiffies + + bus_state->resume_done[faked_port_index] = jiffies + msecs_to_jiffies(20); mod_timer(&hcd->rh_timer, - xhci->resume_done[port_id - 1]); + bus_state->resume_done[faked_port_index]); /* Do the rest in GetPortStatus */ } } @@ -1231,7 +1337,7 @@ cleanup: spin_unlock(&xhci->lock); /* Pass this up to the core */ - usb_hcd_poll_rh_status(xhci_to_hcd(xhci)); + usb_hcd_poll_rh_status(hcd); spin_lock(&xhci->lock); } @@ -1985,12 +2091,12 @@ cleanup: trb_comp_code != COMP_BABBLE)) xhci_urb_free_priv(xhci, urb_priv); - usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); + usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); xhci_dbg(xhci, "Giveback URB %p, len = %d, " "status = %d\n", urb, urb->actual_length, status); spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); + usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); spin_lock(&xhci->lock); } @@ -2114,7 +2220,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) xhci_warn(xhci, "WARNING: Host System Error\n"); xhci_halt(xhci); hw_died: - xhci_to_hcd(xhci)->state = HC_STATE_HALT; spin_unlock(&xhci->lock); return -ESHUTDOWN; } @@ -2182,8 +2287,12 @@ hw_died: irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd) { irqreturn_t ret; + struct xhci_hcd *xhci; + xhci = hcd_to_xhci(hcd); set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + if (xhci->shared_hcd) + set_bit(HCD_FLAG_SAW_IRQ, &xhci->shared_hcd->flags); ret = xhci_irq(hcd); @@ -2327,7 +2436,7 @@ static int prepare_transfer(struct xhci_hcd *xhci, INIT_LIST_HEAD(&td->cancelled_td_list); if (td_index == 0) { - ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb); + ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb); if (unlikely(ret)) { xhci_urb_free_priv(xhci, urb_priv); urb->hcpriv = NULL; @@ -2363,12 +2472,13 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - - (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; /* How many more 64KB chunks to transfer, how many more TRBs? */ - while (running_total < sg_dma_len(sg)) { + while (running_total < sg_dma_len(sg) && running_total < temp) { num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } @@ -2394,11 +2504,11 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) static void check_trb_math(struct urb *urb, int num_trbs, int running_total) { if (num_trbs != 0) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " "TRBs, %d left\n", __func__, urb->ep->desc.bEndpointAddress, num_trbs); if (running_total != urb->transfer_buffer_length) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " "queued %#x (%d), asked for %#x (%d)\n", __func__, urb->ep->desc.bEndpointAddress, @@ -2533,8 +2643,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, sg = urb->sg; addr = (u64) sg_dma_address(sg); this_sg_len = sg_dma_len(sg); - trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; @@ -2572,7 +2681,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), (unsigned int) addr + trb_buff_len); if (TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) { + (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) { xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n"); xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n", (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), @@ -2616,7 +2725,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (running_total + trb_buff_len > urb->transfer_buffer_length) trb_buff_len = @@ -2656,7 +2765,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = 0; /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2700,8 +2810,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; trb_buff_len = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); - if (urb->transfer_buffer_length < trb_buff_len) + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; first_trb = true; @@ -2879,8 +2989,8 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; @@ -3125,24 +3235,6 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, return 0; } -/* Queue a no-op command on the command ring */ -static int queue_cmd_noop(struct xhci_hcd *xhci) -{ - return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false); -} - -/* - * Place a no-op command on the command ring to test the command and - * event ring. - */ -void *xhci_setup_one_noop(struct xhci_hcd *xhci) -{ - if (queue_cmd_noop(xhci) < 0) - return NULL; - xhci->noops_submitted++; - return xhci_ring_cmd_db; -} - /* Queue a slot enable or disable request on the command ring */ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) { @@ -3223,6 +3315,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id); u32 type = TRB_TYPE(TRB_SET_DEQ); + struct xhci_virt_ep *ep; addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr); if (addr == 0) { @@ -3231,6 +3324,14 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, deq_seg, deq_ptr); return 0; } + ep = &xhci->devs[slot_id]->eps[ep_index]; + if ((ep->ep_state & SET_DEQ_PENDING)) { + xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n"); + xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n"); + return 0; + } + ep->queued_deq_seg = deq_seg; + ep->queued_deq_ptr = deq_ptr; return queue_command(xhci, lower_32_bits(addr) | cycle_state, upper_32_bits(addr), trb_stream_id, trb_slot_id | trb_ep_index | type, false); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 34cf4e1..9a3645f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -93,23 +93,26 @@ void xhci_quiesce(struct xhci_hcd *xhci) * * Disable any IRQs and clear the run/stop bit. * HC will complete any current and actively pipelined transactions, and - * should halt within 16 microframes of the run/stop bit being cleared. + * should halt within 16 ms of the run/stop bit being cleared. * Read HC Halted bit in the status register to see when the HC is finished. - * XXX: shouldn't we set HC_STATE_HALT here somewhere? */ int xhci_halt(struct xhci_hcd *xhci) { + int ret; xhci_dbg(xhci, "// Halt the HC\n"); xhci_quiesce(xhci); - return handshake(xhci, &xhci->op_regs->status, + ret = handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); + if (!ret) + xhci->xhc_state |= XHCI_STATE_HALTED; + return ret; } /* * Set the run bit and wait for the host to be running. */ -int xhci_start(struct xhci_hcd *xhci) +static int xhci_start(struct xhci_hcd *xhci) { u32 temp; int ret; @@ -130,11 +133,13 @@ int xhci_start(struct xhci_hcd *xhci) xhci_err(xhci, "Host took too long to start, " "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); + if (!ret) + xhci->xhc_state &= ~XHCI_STATE_HALTED; return ret; } /* - * Reset a halted HC, and set the internal HC state to HC_STATE_HALT. + * Reset a halted HC. * * This resets pipelines, timers, counters, state machines, etc. * Transactions will be terminated immediately, and operational registers @@ -156,8 +161,6 @@ int xhci_reset(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RESET; xhci_writel(xhci, command, &xhci->op_regs->command); - /* XXX: Why does EHCI set this here? Shouldn't other code do this? */ - xhci_to_hcd(xhci)->state = HC_STATE_HALT; ret = handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000); @@ -329,7 +332,7 @@ int xhci_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING -void xhci_event_ring_work(unsigned long arg) +static void xhci_event_ring_work(unsigned long arg) { unsigned long flags; int temp; @@ -350,7 +353,6 @@ void xhci_event_ring_work(unsigned long arg) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp); - xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled); xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask); xhci->error_bitmask = 0; xhci_dbg(xhci, "Event ring:\n"); @@ -370,10 +372,6 @@ void xhci_event_ring_work(unsigned long arg) xhci_dbg_ep_rings(xhci, i, j, &xhci->devs[i]->eps[j]); } } - - if (xhci->noops_submitted != NUM_TEST_NOOPS) - if (xhci_setup_one_noop(xhci)) - xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); if (!xhci->zombie) @@ -383,6 +381,21 @@ void xhci_event_ring_work(unsigned long arg) } #endif +static int xhci_run_finished(struct xhci_hcd *xhci) +{ + if (xhci_start(xhci)) { + xhci_halt(xhci); + return -ENODEV; + } + xhci->shared_hcd->state = HC_STATE_RUNNING; + + if (xhci->quirks & XHCI_NEC_HOST) + xhci_ring_cmd_db(xhci); + + xhci_dbg(xhci, "Finished xhci_run for USB3 roothub\n"); + return 0; +} + /* * Start the HC after it was halted. * @@ -402,9 +415,14 @@ int xhci_run(struct usb_hcd *hcd) u32 ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - void (*doorbell)(struct xhci_hcd *) = NULL; + + /* Start the xHCI host controller running only after the USB 2.0 roothub + * is setup. + */ hcd->uses_new_polling = 1; + if (!usb_hcd_is_primary_hcd(hcd)) + return xhci_run_finished(xhci); xhci_dbg(xhci, "xhci_run\n"); /* unregister the legacy interrupt */ @@ -461,7 +479,6 @@ int xhci_run(struct usb_hcd *hcd) xhci_writel(xhci, temp, &xhci->ir_set->irq_control); /* Set the HCD state before we enable the irqs */ - hcd->state = HC_STATE_RUNNING; temp = xhci_readl(xhci, &xhci->op_regs->command); temp |= (CMD_EIE); xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n", @@ -473,26 +490,29 @@ int xhci_run(struct usb_hcd *hcd) xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); xhci_writel(xhci, ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); - if (NUM_TEST_NOOPS > 0) - doorbell = xhci_setup_one_noop(xhci); if (xhci->quirks & XHCI_NEC_HOST) xhci_queue_vendor_command(xhci, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); - if (xhci_start(xhci)) { - xhci_halt(xhci); - return -ENODEV; - } + xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n"); + return 0; +} - if (doorbell) - (*doorbell)(xhci); - if (xhci->quirks & XHCI_NEC_HOST) - xhci_ring_cmd_db(xhci); +static void xhci_only_stop_hcd(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); - xhci_dbg(xhci, "Finished xhci_run\n"); - return 0; + spin_lock_irq(&xhci->lock); + xhci_halt(xhci); + + /* The shared_hcd is going to be deallocated shortly (the USB core only + * calls this function when allocation fails in usb_add_hcd(), or + * usb_remove_hcd() is called). So we need to unset xHCI's pointer. + */ + xhci->shared_hcd = NULL; + spin_unlock_irq(&xhci->lock); } /* @@ -509,7 +529,15 @@ void xhci_stop(struct usb_hcd *hcd) u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (!usb_hcd_is_primary_hcd(hcd)) { + xhci_only_stop_hcd(xhci->shared_hcd); + return; + } + spin_lock_irq(&xhci->lock); + /* Make sure the xHC is halted for a USB3 roothub + * (xhci_stop() could be called as part of failed init). + */ xhci_halt(xhci); xhci_reset(xhci); spin_unlock_irq(&xhci->lock); @@ -528,7 +556,7 @@ void xhci_stop(struct usb_hcd *hcd) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); @@ -542,6 +570,8 @@ void xhci_stop(struct usb_hcd *hcd) * This is called when the machine is rebooting or halting. We assume that the * machine will be powered off, and the HC's internal state will be reset. * Don't bother to free memory. + * + * This will only ever be called with the main usb_hcd (the USB3 roothub). */ void xhci_shutdown(struct usb_hcd *hcd) { @@ -657,6 +687,7 @@ int xhci_suspend(struct xhci_hcd *xhci) spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); /* step 1: stop endpoint */ /* skipped assuming that port suspend has done */ @@ -706,10 +737,15 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); - int old_state, retval; + struct usb_hcd *secondary_hcd; + int retval; - old_state = hcd->state; - if (time_before(jiffies, xhci->next_statechange)) + /* Wait a bit if either of the roothubs need to settle from the + * transistion into bus suspend. + */ + if (time_before(jiffies, xhci->bus_state[0].next_statechange) || + time_before(jiffies, + xhci->bus_state[1].next_statechange)) msleep(100); spin_lock_irq(&xhci->lock); @@ -755,23 +791,41 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); xhci_dbg(xhci, "xhci_stop completed - status = %x\n", xhci_readl(xhci, &xhci->op_regs->status)); - xhci_dbg(xhci, "Initialize the HCD\n"); - retval = xhci_init(hcd); + /* USB core calls the PCI reinit and start functions twice: + * first with the primary HCD, and then with the secondary HCD. + * If we don't do the same, the host will never be started. + */ + if (!usb_hcd_is_primary_hcd(hcd)) + secondary_hcd = hcd; + else + secondary_hcd = xhci->shared_hcd; + + xhci_dbg(xhci, "Initialize the xhci_hcd\n"); + retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + xhci_dbg(xhci, "Start the primary HCD\n"); + retval = xhci_run(hcd->primary_hcd); + if (retval) + goto failed_restart; - xhci_dbg(xhci, "Start the HCD\n"); - retval = xhci_run(hcd); - if (!retval) + xhci_dbg(xhci, "Start the secondary HCD\n"); + retval = xhci_run(secondary_hcd); + if (!retval) { set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + set_bit(HCD_FLAG_HW_ACCESSIBLE, + &xhci->shared_hcd->flags); + } +failed_restart: hcd->state = HC_STATE_SUSPENDED; + xhci->shared_hcd->state = HC_STATE_SUSPENDED; return retval; } @@ -792,10 +846,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - if (!hibernated) - hcd->state = old_state; - else - hcd->state = HC_STATE_SUSPENDED; + set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); spin_unlock_irq(&xhci->lock); return 0; @@ -857,7 +908,7 @@ unsigned int xhci_last_valid_endpoint(u32 added_ctxs) /* Returns 1 if the arguments are OK; * returns 0 this is a root hub; returns -EINVAL for NULL pointers. */ -int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev, const char *func) { struct xhci_hcd *xhci; @@ -1167,13 +1218,13 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (ret || !urb->hcpriv) goto done; temp = xhci_readl(xhci, &xhci->op_regs->status); - if (temp == 0xffffffff) { + if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "HW died, freeing TD.\n"); urb_priv = urb->hcpriv; usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); - usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN); + usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN); xhci_urb_free_priv(xhci, urb_priv); return ret; } @@ -1693,7 +1744,7 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); } -void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, +static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7f236fd..711de25 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -644,6 +644,9 @@ struct xhci_ep_ctx { #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) +/* deq bitmasks */ +#define EP_CTX_CYCLE_MASK (1 << 0) + /** * struct xhci_input_control_context @@ -746,6 +749,12 @@ struct xhci_virt_ep { struct timer_list stop_cmd_timer; int stop_cmds_pending; struct xhci_hcd *xhci; + /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue + * command. We'll need to update the ring's dequeue segment and dequeue + * pointer after the command completes. + */ + struct xhci_segment *queued_deq_seg; + union xhci_trb *queued_deq_ptr; /* * Sometimes the xHC can not process isochronous endpoint ring quickly * enough, and it will miss some isoc tds on the ring and generate @@ -1161,8 +1170,29 @@ struct s3_save { u64 erst_dequeue; }; +struct xhci_bus_state { + unsigned long bus_suspended; + unsigned long next_statechange; + + /* Port suspend arrays are indexed by the portnum of the fake roothub */ + /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */ + u32 port_c_suspend; + u32 suspended_ports; + unsigned long resume_done[USB_MAXCHILDREN]; +}; + +static inline unsigned int hcd_index(struct usb_hcd *hcd) +{ + if (hcd->speed == HCD_USB3) + return 0; + else + return 1; +} + /* There is one ehci_hci structure per controller */ struct xhci_hcd { + struct usb_hcd *main_hcd; + struct usb_hcd *shared_hcd; /* glue to PCI and HCD framework */ struct xhci_cap_regs __iomem *cap_regs; struct xhci_op_regs __iomem *op_regs; @@ -1224,9 +1254,6 @@ struct xhci_hcd { /* Host controller watchdog timer structures */ unsigned int xhc_state; - unsigned long bus_suspended; - unsigned long next_statechange; - u32 command; struct s3_save s3; /* Host controller is dying - not responding to commands. "I'm not dead yet!" @@ -1242,18 +1269,15 @@ struct xhci_hcd { * There are no reports of xHCI host controllers that display this issue. */ #define XHCI_STATE_DYING (1 << 0) +#define XHCI_STATE_HALTED (1 << 1) /* Statistics */ - int noops_submitted; - int noops_handled; int error_bitmask; unsigned int quirks; #define XHCI_LINK_TRB_QUIRK (1 << 0) #define XHCI_RESET_EP_QUIRK (1 << 1) #define XHCI_NEC_HOST (1 << 2) - u32 port_c_suspend[8]; /* port suspend change*/ - u32 suspended_ports[8]; /* which ports are - suspended */ - unsigned long resume_done[MAX_HC_PORTS]; + /* There are two roothubs to keep track of bus suspend info for */ + struct xhci_bus_state bus_state[2]; /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ u8 *port_array; /* Array of pointers to USB 3.0 PORTSC registers */ @@ -1264,18 +1288,15 @@ struct xhci_hcd { unsigned int num_usb2_ports; }; -/* For testing purposes */ -#define NUM_TEST_NOOPS 0 - /* convert between an HCD pointer and the corresponding EHCI_HCD */ static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd) { - return (struct xhci_hcd *) (hcd->hcd_priv); + return *((struct xhci_hcd **) (hcd->hcd_priv)); } static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) { - return container_of((void *) xhci, struct usb_hcd, hcd_priv); + return xhci->main_hcd; } #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING @@ -1348,7 +1369,7 @@ static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) } /* xHCI debugging */ -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num); +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); void xhci_dbg_regs(struct xhci_hcd *xhci); void xhci_print_run_regs(struct xhci_hcd *xhci); @@ -1471,7 +1492,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, dma_addr_t suspect_dma); int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); -void *xhci_setup_one_noop(struct xhci_hcd *xhci); int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id); int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); @@ -1525,7 +1545,8 @@ int xhci_bus_resume(struct usb_hcd *hcd); #endif /* CONFIG_PM */ u32 xhci_port_state_to_neutral(u32 state); -int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port); +int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 port); void xhci_ring_device(struct xhci_hcd *xhci, int slot_id); /* xHCI contexts */ |