diff options
Diffstat (limited to 'drivers/usb/serial/option.c')
-rw-r--r-- | drivers/usb/serial/option.c | 64 |
1 files changed, 32 insertions, 32 deletions
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f491420..9202418 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -408,24 +408,24 @@ module_exit(option_exit); static void option_rx_throttle(struct usb_serial_port *port) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void option_rx_unthrottle(struct usb_serial_port *port) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void option_break_ctl(struct usb_serial_port *port, int break_state) { /* Unfortunately, I don't know how to send a break */ - dbg("%s", __FUNCTION__); + dbg("%s", __func__); } static void option_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Doesn't support option setting */ tty_termios_copy_hw(port->tty->termios, old_termios); option_send_setup(port); @@ -486,7 +486,7 @@ static int option_write(struct usb_serial_port *port, portdata = usb_get_serial_port_data(port); - dbg("%s: write (%d chars)", __FUNCTION__, count); + dbg("%s: write (%d chars)", __func__, count); i = 0; left = count; @@ -507,7 +507,7 @@ static int option_write(struct usb_serial_port *port, dbg("usb_write %p failed (err=%d)", this_urb, this_urb->status); - dbg("%s: endpoint %d buf %d", __FUNCTION__, + dbg("%s: endpoint %d buf %d", __func__, usb_pipeendpoint(this_urb->pipe), i); /* send the data */ @@ -529,7 +529,7 @@ static int option_write(struct usb_serial_port *port, } count -= left; - dbg("%s: wrote (did %d)", __FUNCTION__, count); + dbg("%s: wrote (did %d)", __func__, count); return count; } @@ -542,14 +542,14 @@ static void option_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg("%s: %p", __FUNCTION__, urb); + dbg("%s: %p", __func__, urb); endpoint = usb_pipeendpoint(urb->pipe); port = (struct usb_serial_port *) urb->context; if (status) { dbg("%s: nonzero status: %d on endpoint %02x.", - __FUNCTION__, status, endpoint); + __func__, status, endpoint); } else { tty = port->tty; if (urb->actual_length) { @@ -557,7 +557,7 @@ static void option_indat_callback(struct urb *urb) tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } else { - dbg("%s: empty read urb received", __FUNCTION__); + dbg("%s: empty read urb received", __func__); } /* Resubmit urb so we continue receiving */ @@ -565,7 +565,7 @@ static void option_indat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err) printk(KERN_ERR "%s: resubmit read urb failed. " - "(%d)", __FUNCTION__, err); + "(%d)", __func__, err); } } return; @@ -577,7 +577,7 @@ static void option_outdat_callback(struct urb *urb) struct option_port_private *portdata; int i; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); port = (struct usb_serial_port *) urb->context; @@ -601,15 +601,15 @@ static void option_instat_callback(struct urb *urb) struct option_port_private *portdata = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; - dbg("%s", __FUNCTION__); - dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata); + dbg("%s", __func__); + dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata); if (status == 0) { struct usb_ctrlrequest *req_pkt = (struct usb_ctrlrequest *)urb->transfer_buffer; if (!req_pkt) { - dbg("%s: NULL req_pkt\n", __FUNCTION__); + dbg("%s: NULL req_pkt\n", __func__); return; } if ((req_pkt->bRequestType == 0xA1) && @@ -619,7 +619,7 @@ static void option_instat_callback(struct urb *urb) urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); - dbg("%s: signal x%x", __FUNCTION__, signals); + dbg("%s: signal x%x", __func__, signals); old_dcd_state = portdata->dcd_state; portdata->cts_state = 1; @@ -631,11 +631,11 @@ static void option_instat_callback(struct urb *urb) old_dcd_state && !portdata->dcd_state) tty_hangup(port->tty); } else { - dbg("%s: type %x req %x", __FUNCTION__, + dbg("%s: type %x req %x", __func__, req_pkt->bRequestType,req_pkt->bRequest); } } else - dbg("%s: error %d", __FUNCTION__, status); + dbg("%s: error %d", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN) { @@ -643,7 +643,7 @@ static void option_instat_callback(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dbg("%s: resubmit intr urb failed. (%d)", - __FUNCTION__, err); + __func__, err); } } @@ -662,7 +662,7 @@ static int option_write_room(struct usb_serial_port *port) data_len += OUT_BUFLEN; } - dbg("%s: %d", __FUNCTION__, data_len); + dbg("%s: %d", __func__, data_len); return data_len; } @@ -680,7 +680,7 @@ static int option_chars_in_buffer(struct usb_serial_port *port) if (this_urb && test_bit(i, &portdata->out_busy)) data_len += this_urb->transfer_buffer_length; } - dbg("%s: %d", __FUNCTION__, data_len); + dbg("%s: %d", __func__, data_len); return data_len; } @@ -693,7 +693,7 @@ static int option_open(struct usb_serial_port *port, struct file *filp) portdata = usb_get_serial_port_data(port); - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Set some sane defaults */ portdata->rts_state = 1; @@ -705,7 +705,7 @@ static int option_open(struct usb_serial_port *port, struct file *filp) if (! urb) continue; if (urb->dev != serial->dev) { - dbg("%s: dev %p != %p", __FUNCTION__, + dbg("%s: dev %p != %p", __func__, urb->dev, serial->dev); continue; } @@ -719,7 +719,7 @@ static int option_open(struct usb_serial_port *port, struct file *filp) err = usb_submit_urb(urb, GFP_KERNEL); if (err) { dbg("%s: submit urb %d failed (%d) %d", - __FUNCTION__, i, err, + __func__, i, err, urb->transfer_buffer_length); } } @@ -747,7 +747,7 @@ static void option_close(struct usb_serial_port *port, struct file *filp) struct usb_serial *serial = port->serial; struct option_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); portdata = usb_get_serial_port_data(port); portdata->rts_state = 0; @@ -780,7 +780,7 @@ static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint, urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint); + dbg("%s: alloc for endpoint %d failed.", __func__, endpoint); return NULL; } @@ -799,7 +799,7 @@ static void option_setup_urbs(struct usb_serial *serial) struct usb_serial_port *port; struct option_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -832,7 +832,7 @@ static int option_send_setup(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); portdata = usb_get_serial_port_data(port); @@ -858,7 +858,7 @@ static int option_startup(struct usb_serial *serial) struct option_port_private *portdata; u8 *buffer; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Now setup per port private data */ for (i = 0; i < serial->num_ports; i++) { @@ -866,7 +866,7 @@ static int option_startup(struct usb_serial *serial) portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); if (!portdata) { dbg("%s: kmalloc for option_port_private (%d) failed!.", - __FUNCTION__, i); + __func__, i); return (1); } @@ -891,7 +891,7 @@ static int option_startup(struct usb_serial *serial) err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) dbg("%s: submit irq_in urb failed %d", - __FUNCTION__, err); + __func__, err); } option_setup_urbs(serial); @@ -915,7 +915,7 @@ static void option_shutdown(struct usb_serial *serial) struct usb_serial_port *port; struct option_port_private *portdata; - dbg("%s", __FUNCTION__); + dbg("%s", __func__); /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { |