diff options
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r-- | drivers/usb/storage/scsiglue.c | 3 | ||||
-rw-r--r-- | drivers/usb/storage/transport.c | 17 | ||||
-rw-r--r-- | drivers/usb/storage/unusual_devs.h | 7 | ||||
-rw-r--r-- | drivers/usb/storage/usb.c | 43 | ||||
-rw-r--r-- | drivers/usb/storage/usb.h | 1 |
5 files changed, 54 insertions, 17 deletions
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index cfa26d5..e5e6df3 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -73,7 +73,8 @@ static const char* host_info(struct Scsi_Host *host) { - return "SCSI emulation for USB Mass Storage devices"; + struct us_data *us = host_to_us(host); + return us->scsi_name; } static int slave_alloc (struct scsi_device *sdev) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 589f6b4..cc313d1 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -666,10 +666,11 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) * to wait for at least one CHECK_CONDITION to determine * SANE_SENSE support */ - if ((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) && + if (unlikely((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) && result == USB_STOR_TRANSPORT_GOOD && !(us->fflags & US_FL_SANE_SENSE) && - !(srb->cmnd[2] & 0x20)) { + !(us->fflags & US_FL_BAD_SENSE) && + !(srb->cmnd[2] & 0x20))) { US_DEBUGP("-- SAT supported, increasing auto-sense\n"); us->fflags |= US_FL_SANE_SENSE; } @@ -718,6 +719,12 @@ Retry_Sense: if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { US_DEBUGP("-- auto-sense aborted\n"); srb->result = DID_ABORT << 16; + + /* If SANE_SENSE caused this problem, disable it */ + if (sense_size != US_SENSE_SIZE) { + us->fflags &= ~US_FL_SANE_SENSE; + us->fflags |= US_FL_BAD_SENSE; + } goto Handle_Errors; } @@ -727,10 +734,11 @@ Retry_Sense: * (small) sense request. This fixes some USB GSM modems */ if (temp_result == USB_STOR_TRANSPORT_FAILED && - (us->fflags & US_FL_SANE_SENSE) && - sense_size != US_SENSE_SIZE) { + sense_size != US_SENSE_SIZE) { US_DEBUGP("-- auto-sense failure, retry small sense\n"); sense_size = US_SENSE_SIZE; + us->fflags &= ~US_FL_SANE_SENSE; + us->fflags |= US_FL_BAD_SENSE; goto Retry_Sense; } @@ -754,6 +762,7 @@ Retry_Sense: */ if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) && !(us->fflags & US_FL_SANE_SENSE) && + !(us->fflags & US_FL_BAD_SENSE) && (srb->sense_buffer[0] & 0x7C) == 0x70) { US_DEBUGP("-- SANE_SENSE support enabled\n"); us->fflags |= US_FL_SANE_SENSE; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d4f034e..64a0a2c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -818,6 +818,13 @@ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Daniel Kukula <daniel.kuku@gmail.com> */ +UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100, + "Prolific Technology, Inc.", + "Prolific Storage Gadget", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_BAD_SENSE ), + /* Reported by Rogerio Brito <rbrito@ime.usp.br> */ UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001, "Prolific Technology, Inc.", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 8060b85..5a53d4f 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -45,6 +45,10 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#ifdef CONFIG_USB_STORAGE_DEBUG +#define DEBUG +#endif + #include <linux/sched.h> #include <linux/errno.h> #include <linux/freezer.h> @@ -228,6 +232,7 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data, if (data_len<36) // You lose. return; + memset(data+8, ' ', 28); if(data[0]&0x20) { /* USB device currently not connected. Return peripheral qualifier 001b ("...however, the physical device is not currently connected @@ -237,15 +242,15 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data, device, it may return zeros or ASCII spaces (20h) in those fields until the data is available from the device."). */ - memset(data+8,0,28); } else { u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice); - memcpy(data+8, us->unusual_dev->vendorName, - strlen(us->unusual_dev->vendorName) > 8 ? 8 : - strlen(us->unusual_dev->vendorName)); - memcpy(data+16, us->unusual_dev->productName, - strlen(us->unusual_dev->productName) > 16 ? 16 : - strlen(us->unusual_dev->productName)); + int n; + + n = strlen(us->unusual_dev->vendorName); + memcpy(data+8, us->unusual_dev->vendorName, min(8, n)); + n = strlen(us->unusual_dev->productName); + memcpy(data+16, us->unusual_dev->productName, min(16, n)); + data[32] = 0x30 + ((bcdDevice>>12) & 0x0F); data[33] = 0x30 + ((bcdDevice>>8) & 0x0F); data[34] = 0x30 + ((bcdDevice>>4) & 0x0F); @@ -459,6 +464,9 @@ static void adjust_quirks(struct us_data *us) case 'a': f |= US_FL_SANE_SENSE; break; + case 'b': + f |= US_FL_BAD_SENSE; + break; case 'c': f |= US_FL_FIX_CAPACITY; break; @@ -808,14 +816,13 @@ static int usb_stor_scan_thread(void * __us) { struct us_data *us = (struct us_data *)__us; - printk(KERN_DEBUG - "usb-storage: device found at %d\n", us->pusb_dev->devnum); + dev_dbg(&us->pusb_intf->dev, "device found\n"); set_freezable(); /* Wait for the timeout to expire or for a disconnect */ if (delay_use > 0) { - printk(KERN_DEBUG "usb-storage: waiting for device " - "to settle before scanning\n"); + dev_dbg(&us->pusb_intf->dev, "waiting for device to settle " + "before scanning\n"); wait_event_freezable_timeout(us->delay_wait, test_bit(US_FLIDX_DONT_SCAN, &us->dflags), delay_use * HZ); @@ -832,7 +839,7 @@ static int usb_stor_scan_thread(void * __us) mutex_unlock(&us->dev_mutex); } scsi_scan_host(us_to_host(us)); - printk(KERN_DEBUG "usb-storage: device scan complete\n"); + dev_dbg(&us->pusb_intf->dev, "scan complete\n"); /* Should we unbind if no devices were detected? */ } @@ -840,6 +847,15 @@ static int usb_stor_scan_thread(void * __us) complete_and_exit(&us->scanning_done, 0); } +static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) +{ + struct usb_device *usb_dev = interface_to_usbdev(intf); + + if (usb_dev->bus->sg_tablesize) { + return usb_dev->bus->sg_tablesize; + } + return SG_ALL; +} /* First part of general USB mass-storage probing */ int usb_stor_probe1(struct us_data **pus, @@ -868,6 +884,7 @@ int usb_stor_probe1(struct us_data **pus, * Allow 16-byte CDBs and thus > 2TB */ host->max_cmd_len = 16; + host->sg_tablesize = usb_stor_sg_tablesize(intf); *pus = us = host_to_us(host); memset(us, 0, sizeof(struct us_data)); mutex_init(&(us->dev_mutex)); @@ -929,6 +946,8 @@ int usb_stor_probe2(struct us_data *us) result = usb_stor_acquire_resources(us); if (result) goto BadDevice; + snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s", + dev_name(&us->pusb_intf->dev)); result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev); if (result) { printk(KERN_WARNING USB_STORAGE diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 2609efb..6971713 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -132,6 +132,7 @@ struct us_data { /* SCSI interfaces */ struct scsi_cmnd *srb; /* current srb */ unsigned int tag; /* current dCBWTag */ + char scsi_name[32]; /* scsi_host name */ /* control and bulk communications data */ struct urb *current_urb; /* USB requests */ |