summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c4
-rw-r--r--drivers/usb/host/ehci-ps3.c7
-rw-r--r--drivers/usb/host/ohci-ps3.c8
-rw-r--r--drivers/usb/host/ohci-pxa27x.c4
-rw-r--r--drivers/usb/input/Makefile5
-rw-r--r--drivers/usb/input/acecad.c28
-rw-r--r--drivers/usb/input/aiptek.c38
-rw-r--r--drivers/usb/input/appletouch.c29
-rw-r--r--drivers/usb/input/ati_remote.c42
-rw-r--r--drivers/usb/input/ati_remote2.c16
-rw-r--r--drivers/usb/input/gtco.c634
-rw-r--r--drivers/usb/input/itmtouch.c271
-rw-r--r--drivers/usb/input/kbtab.c22
-rw-r--r--drivers/usb/input/keyspan_remote.c29
-rw-r--r--drivers/usb/input/mtouchusb.c332
-rw-r--r--drivers/usb/input/powermate.c27
-rw-r--r--drivers/usb/input/touchkitusb.c392
-rw-r--r--drivers/usb/input/usbtouchscreen.c10
-rw-r--r--drivers/usb/input/wacom_sys.c22
-rw-r--r--drivers/usb/input/xpad.c22
-rw-r--r--drivers/usb/input/yealink.c13
-rw-r--r--drivers/usb/net/kaweth.c1
22 files changed, 480 insertions, 1476 deletions
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 2c043a1..84392e8 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -1483,7 +1483,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
#ifdef CONFIG_ARCH_PXA
/* Disable clock for USB device */
- pxa_set_cken(CKEN11_USB, 0);
+ pxa_set_cken(CKEN_USB, 0);
#endif
ep0_idle (dev);
@@ -1529,7 +1529,7 @@ static void udc_enable (struct pxa2xx_udc *dev)
#ifdef CONFIG_ARCH_PXA
/* Enable clock for USB device */
- pxa_set_cken(CKEN11_USB, 1);
+ pxa_set_cken(CKEN_USB, 1);
udelay(5);
#endif
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 29dcd27..37b83ba 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -73,13 +73,6 @@ static const struct hc_driver ps3_ehci_hc_driver = {
#endif
};
-#if !defined(DEBUG)
-#undef dev_dbg
-static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
- const struct device *_dev, const char *fmt, ...) {return 0;}
-#endif
-
-
static int ps3_ehci_sb_probe(struct ps3_system_bus_device *dev)
{
int result;
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 93a6eb0..d7cf072 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -75,14 +75,6 @@ static const struct hc_driver ps3_ohci_hc_driver = {
#endif
};
-/* redefine dev_dbg to do a syntax check */
-
-#if !defined(DEBUG)
-#undef dev_dbg
-static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
- const struct device *_dev, const char *fmt, ...) {return 0;}
-#endif
-
static int ps3_ohci_sb_probe(struct ps3_system_bus_device *dev)
{
int result;
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index f1563dc..23d2fe5 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -80,7 +80,7 @@ static int pxa27x_start_hc(struct device *dev)
inf = dev->platform_data;
- pxa_set_cken(CKEN10_USBHOST, 1);
+ pxa_set_cken(CKEN_USBHOST, 1);
UHCHR |= UHCHR_FHR;
udelay(11);
@@ -123,7 +123,7 @@ static void pxa27x_stop_hc(struct device *dev)
UHCCOMS |= 1;
udelay(10);
- pxa_set_cken(CKEN10_USBHOST, 0);
+ pxa_set_cken(CKEN_USBHOST, 0);
}
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index 9bf420e..284a073 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -10,9 +10,6 @@ obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_USB_KBTAB) += kbtab.o
obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o
-obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o
-obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o
-obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
obj-$(CONFIG_USB_TOUCHSCREEN) += usbtouchscreen.o
obj-$(CONFIG_USB_POWERMATE) += powermate.o
obj-$(CONFIG_USB_WACOM) += wacom.o
@@ -20,7 +17,7 @@ obj-$(CONFIG_USB_ACECAD) += acecad.o
obj-$(CONFIG_USB_YEALINK) += yealink.o
obj-$(CONFIG_USB_XPAD) += xpad.o
obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
-obj-$(CONFIG_USB_GTCO) += gtco.o
+obj-$(CONFIG_USB_GTCO) += gtco.o
ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
index 909138e..be8e924 100644
--- a/drivers/usb/input/acecad.c
+++ b/drivers/usb/input/acecad.c
@@ -111,7 +111,7 @@ resubmit:
static int usb_acecad_open(struct input_dev *dev)
{
- struct usb_acecad *acecad = dev->private;
+ struct usb_acecad *acecad = input_get_drvdata(dev);
acecad->irq->dev = acecad->usbdev;
if (usb_submit_urb(acecad->irq, GFP_KERNEL))
@@ -122,7 +122,7 @@ static int usb_acecad_open(struct input_dev *dev)
static void usb_acecad_close(struct input_dev *dev)
{
- struct usb_acecad *acecad = dev->private;
+ struct usb_acecad *acecad = input_get_drvdata(dev);
usb_kill_urb(acecad->irq);
}
@@ -135,6 +135,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
struct usb_acecad *acecad;
struct input_dev *input_dev;
int pipe, maxp;
+ int err = -ENOMEM;
if (interface->desc.bNumEndpoints != 1)
return -ENODEV;
@@ -149,16 +150,22 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
input_dev = input_allocate_device();
- if (!acecad || !input_dev)
+ if (!acecad || !input_dev) {
+ err = -ENOMEM;
goto fail1;
+ }
acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma);
- if (!acecad->data)
+ if (!acecad->data) {
+ err= -ENOMEM;
goto fail1;
+ }
acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!acecad->irq)
+ if (!acecad->irq) {
+ err = -ENOMEM;
goto fail2;
+ }
acecad->usbdev = dev;
acecad->input = input_dev;
@@ -178,8 +185,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
input_dev->name = acecad->name;
input_dev->phys = acecad->phys;
usb_to_input_id(dev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = acecad;
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, acecad);
input_dev->open = usb_acecad_open;
input_dev->close = usb_acecad_close;
@@ -221,7 +229,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
acecad->irq->transfer_dma = acecad->data_dma;
acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(acecad->input);
+ err = input_register_device(acecad->input);
+ if (err)
+ goto fail2;
usb_set_intfdata(intf, acecad);
@@ -230,7 +240,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
fail1: input_free_device(input_dev);
kfree(acecad);
- return -ENOMEM;
+ return err;
}
static void usb_acecad_disconnect(struct usb_interface *intf)
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index f857935..cc0a498 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -798,7 +798,7 @@ MODULE_DEVICE_TABLE(usb, aiptek_ids);
*/
static int aiptek_open(struct input_dev *inputdev)
{
- struct aiptek *aiptek = inputdev->private;
+ struct aiptek *aiptek = input_get_drvdata(inputdev);
aiptek->urb->dev = aiptek->usbdev;
if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
@@ -812,7 +812,7 @@ static int aiptek_open(struct input_dev *inputdev)
*/
static void aiptek_close(struct input_dev *inputdev)
{
- struct aiptek *aiptek = inputdev->private;
+ struct aiptek *aiptek = input_get_drvdata(inputdev);
usb_kill_urb(aiptek->urb);
}
@@ -1972,6 +1972,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
AIPTEK_PROGRAMMABLE_DELAY_200,
AIPTEK_PROGRAMMABLE_DELAY_300
};
+ int err = -ENOMEM;
/* programmableDelay is where the command-line specified
* delay is kept. We make it the first element of speeds[],
@@ -2043,8 +2044,10 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
inputdev->name = "Aiptek";
inputdev->phys = aiptek->features.usbPath;
usb_to_input_id(usbdev, &inputdev->id);
- inputdev->cdev.dev = &intf->dev;
- inputdev->private = aiptek;
+ inputdev->dev.parent = &intf->dev;
+
+ input_set_drvdata(inputdev, aiptek);
+
inputdev->open = aiptek_open;
inputdev->close = aiptek_close;
@@ -2133,7 +2136,9 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
/* Register the tablet as an Input Device
*/
- input_register_device(aiptek->inputdev);
+ err = input_register_device(aiptek->inputdev);
+ if (err)
+ goto fail2;
/* We now will look for the evdev device which is mapped to
* the tablet. The partial name is kept in the link list of
@@ -2165,23 +2170,13 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
return 0;
-fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+ fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
aiptek->data_dma);
-fail1: input_free_device(inputdev);
+ fail1: input_free_device(inputdev);
kfree(aiptek);
- return -ENOMEM;
+ return err;
}
-/* Forward declaration */
-static void aiptek_disconnect(struct usb_interface *intf);
-
-static struct usb_driver aiptek_driver = {
- .name = "aiptek",
- .probe = aiptek_probe,
- .disconnect = aiptek_disconnect,
- .id_table = aiptek_ids,
-};
-
/***********************************************************************
* Deal with tablet disconnecting from the system.
*/
@@ -2206,6 +2201,13 @@ static void aiptek_disconnect(struct usb_interface *intf)
}
}
+static struct usb_driver aiptek_driver = {
+ .name = "aiptek",
+ .probe = aiptek_probe,
+ .disconnect = aiptek_disconnect,
+ .id_table = aiptek_ids,
+};
+
static int __init aiptek_init(void)
{
int result = usb_register(&aiptek_driver);
diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c
index c77291d..e321526 100644
--- a/drivers/usb/input/appletouch.c
+++ b/drivers/usb/input/appletouch.c
@@ -466,7 +466,7 @@ exit:
static int atp_open(struct input_dev *input)
{
- struct atp *dev = input->private;
+ struct atp *dev = input_get_drvdata(input);
if (usb_submit_urb(dev->urb, GFP_ATOMIC))
return -EIO;
@@ -477,7 +477,7 @@ static int atp_open(struct input_dev *input)
static void atp_close(struct input_dev *input)
{
- struct atp *dev = input->private;
+ struct atp *dev = input_get_drvdata(input);
usb_kill_urb(dev->urb);
dev->open = 0;
@@ -491,8 +491,7 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
int int_in_endpointAddr = 0;
- int i, retval = -ENOMEM;
-
+ int i, error = -ENOMEM;
/* set up the endpoint information */
/* use only the first interrupt-in endpoint */
@@ -567,17 +566,13 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
}
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->urb) {
- retval = -ENOMEM;
+ if (!dev->urb)
goto err_free_devs;
- }
dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL,
&dev->urb->transfer_dma);
- if (!dev->data) {
- retval = -ENOMEM;
+ if (!dev->data)
goto err_free_urb;
- }
usb_fill_int_urb(dev->urb, udev,
usb_rcvintpipe(udev, int_in_endpointAddr),
@@ -589,9 +584,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
input_dev->name = "appletouch";
input_dev->phys = dev->phys;
usb_to_input_id(dev->udev, &input_dev->id);
- input_dev->cdev.dev = &iface->dev;
+ input_dev->dev.parent = &iface->dev;
+
+ input_set_drvdata(input_dev, dev);
- input_dev->private = dev;
input_dev->open = atp_open;
input_dev->close = atp_close;
@@ -633,20 +629,25 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
set_bit(BTN_LEFT, input_dev->keybit);
- input_register_device(dev->input);
+ error = input_register_device(dev->input);
+ if (error)
+ goto err_free_buffer;
/* save our data pointer in this interface device */
usb_set_intfdata(iface, dev);
return 0;
+ err_free_buffer:
+ usb_buffer_free(dev->udev, dev->datalen,
+ dev->data, dev->urb->transfer_dma);
err_free_urb:
usb_free_urb(dev->urb);
err_free_devs:
usb_set_intfdata(iface, NULL);
kfree(dev);
input_free_device(input_dev);
- return retval;
+ return error;
}
static void atp_disconnect(struct usb_interface *iface)
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index b724e36..471aab2 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -120,6 +120,7 @@
* behaviour.
*/
#define FILTER_TIME 60 /* msec */
+#define REPEAT_DELAY 500 /* msec */
static unsigned long channel_mask;
module_param(channel_mask, ulong, 0644);
@@ -133,6 +134,10 @@ static int repeat_filter = FILTER_TIME;
module_param(repeat_filter, int, 0644);
MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
+static int repeat_delay = REPEAT_DELAY;
+module_param(repeat_delay, int, 0644);
+MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec");
+
#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
#undef err
#define err(format, arg...) printk(KERN_ERR format , ## arg)
@@ -174,6 +179,8 @@ struct ati_remote {
unsigned char old_data[2]; /* Detect duplicate events */
unsigned long old_jiffies;
unsigned long acc_jiffies; /* handle acceleration */
+ unsigned long first_jiffies;
+
unsigned int repeat_count;
char name[NAME_BUFSIZE];
@@ -318,7 +325,7 @@ static void ati_remote_dump(unsigned char *data, unsigned int len)
*/
static int ati_remote_open(struct input_dev *inputdev)
{
- struct ati_remote *ati_remote = inputdev->private;
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
/* On first open, submit the read urb which was set up previously. */
ati_remote->irq_urb->dev = ati_remote->udev;
@@ -336,7 +343,7 @@ static int ati_remote_open(struct input_dev *inputdev)
*/
static void ati_remote_close(struct input_dev *inputdev)
{
- struct ati_remote *ati_remote = inputdev->private;
+ struct ati_remote *ati_remote = input_get_drvdata(inputdev);
usb_kill_urb(ati_remote->irq_urb);
}
@@ -501,21 +508,31 @@ static void ati_remote_input_report(struct urb *urb)
}
if (ati_remote_tbl[index].kind == KIND_FILTERED) {
+ unsigned long now = jiffies;
+
/* Filter duplicate events which happen "too close" together. */
if (ati_remote->old_data[0] == data[1] &&
ati_remote->old_data[1] == data[2] &&
- time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(repeat_filter))) {
+ time_before(now, ati_remote->old_jiffies +
+ msecs_to_jiffies(repeat_filter))) {
ati_remote->repeat_count++;
} else {
ati_remote->repeat_count = 0;
+ ati_remote->first_jiffies = now;
}
ati_remote->old_data[0] = data[1];
ati_remote->old_data[1] = data[2];
- ati_remote->old_jiffies = jiffies;
+ ati_remote->old_jiffies = now;
+ /* Ensure we skip at least the 4 first duplicate events (generated
+ * by a single keypress), and continue skipping until repeat_delay
+ * msecs have passed
+ */
if (ati_remote->repeat_count > 0 &&
- ati_remote->repeat_count < 5)
+ (ati_remote->repeat_count < 5 ||
+ time_before(now, ati_remote->first_jiffies +
+ msecs_to_jiffies(repeat_delay))))
return;
@@ -653,7 +670,8 @@ static void ati_remote_input_init(struct ati_remote *ati_remote)
if (ati_remote_tbl[i].type == EV_KEY)
set_bit(ati_remote_tbl[i].code, idev->keybit);
- idev->private = ati_remote;
+ input_set_drvdata(idev, ati_remote);
+
idev->open = ati_remote_open;
idev->close = ati_remote_close;
@@ -661,7 +679,7 @@ static void ati_remote_input_init(struct ati_remote *ati_remote)
idev->phys = ati_remote->phys;
usb_to_input_id(ati_remote->udev, &idev->id);
- idev->cdev.dev = &ati_remote->udev->dev;
+ idev->dev.parent = &ati_remote->udev->dev;
}
static int ati_remote_initialize(struct ati_remote *ati_remote)
@@ -772,15 +790,17 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
goto fail3;
/* Set up and register input device */
- input_register_device(ati_remote->idev);
+ err = input_register_device(ati_remote->idev);
+ if (err)
+ goto fail3;
usb_set_intfdata(interface, ati_remote);
return 0;
-fail3: usb_kill_urb(ati_remote->irq_urb);
+ fail3: usb_kill_urb(ati_remote->irq_urb);
usb_kill_urb(ati_remote->out_urb);
-fail2: ati_remote_free_buffers(ati_remote);
-fail1: input_free_device(input_dev);
+ fail2: ati_remote_free_buffers(ati_remote);
+ fail1: input_free_device(input_dev);
kfree(ati_remote);
return err;
}
diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c
index 6459be9..a9032aa 100644
--- a/drivers/usb/input/ati_remote2.c
+++ b/drivers/usb/input/ati_remote2.c
@@ -131,7 +131,7 @@ static struct usb_driver ati_remote2_driver = {
static int ati_remote2_open(struct input_dev *idev)
{
- struct ati_remote2 *ar2 = idev->private;
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
int r;
r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
@@ -153,7 +153,7 @@ static int ati_remote2_open(struct input_dev *idev)
static void ati_remote2_close(struct input_dev *idev)
{
- struct ati_remote2 *ar2 = idev->private;
+ struct ati_remote2 *ar2 = input_get_drvdata(idev);
usb_kill_urb(ar2->urb[0]);
usb_kill_urb(ar2->urb[1]);
@@ -337,14 +337,14 @@ static void ati_remote2_complete_key(struct urb *urb)
static int ati_remote2_input_init(struct ati_remote2 *ar2)
{
struct input_dev *idev;
- int i;
+ int i, retval;
idev = input_allocate_device();
if (!idev)
return -ENOMEM;
ar2->idev = idev;
- idev->private = ar2;
+ input_set_drvdata(idev, ar2);
idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL);
idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
@@ -362,13 +362,13 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
idev->phys = ar2->phys;
usb_to_input_id(ar2->udev, &idev->id);
- idev->cdev.dev = &ar2->udev->dev;
+ idev->dev.parent = &ar2->udev->dev;
- i = input_register_device(idev);
- if (i)
+ retval = input_register_device(idev);
+ if (retval)
input_free_device(idev);
- return i;
+ return retval;
}
static int ati_remote2_urb_init(struct ati_remote2 *ar2)
diff --git a/drivers/usb/input/gtco.c b/drivers/usb/input/gtco.c
index ae756e0..b2ca10f2f 100644
--- a/drivers/usb/input/gtco.c
+++ b/drivers/usb/input/gtco.c
@@ -187,7 +187,6 @@ struct hid_descriptor
/*
- *
* This is an abbreviated parser for the HID Report Descriptor. We
* know what devices we are talking to, so this is by no means meant
* to be generic. We can make some safe assumptions:
@@ -204,7 +203,7 @@ struct hid_descriptor
static void parse_hid_report_descriptor(struct gtco *device, char * report,
int length)
{
- int x,i=0;
+ int x, i = 0;
/* Tag primitive vars */
__u8 prefix;
@@ -215,7 +214,6 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
__u16 data16 = 0;
__u32 data32 = 0;
-
/* For parsing logic */
int inputnum = 0;
__u32 usage = 0;
@@ -225,46 +223,46 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
__u32 oldval[TAG_GLOB_MAX];
/* Debug stuff */
- char maintype='x';
+ char maintype = 'x';
char globtype[12];
- int indent=0;
- char indentstr[10]="";
-
+ int indent = 0;
+ char indentstr[10] = "";
dbg("======>>>>>>PARSE<<<<<<======");
/* Walk this report and pull out the info we need */
- while (i<length){
- prefix=report[i];
+ while (i < length) {
+ prefix = report[i];
/* Skip over prefix */
i++;
/* Determine data size and save the data in the proper variable */
size = PREF_SIZE(prefix);
- switch(size){
+ switch (size) {
case 1:
data = report[i];
break;
case 2:
- data16 = le16_to_cpu(get_unaligned((__le16*)(&(report[i]))));
+ data16 = le16_to_cpu(get_unaligned((__le16 *)&report[i]));
break;
case 3:
size = 4;
- data32 = le32_to_cpu(get_unaligned((__le32*)(&(report[i]))));
+ data32 = le32_to_cpu(get_unaligned((__le32 *)&report[i]));
+ break;
}
/* Skip size of data */
- i+=size;
+ i += size;
/* What we do depends on the tag type */
tag = PREF_TAG(prefix);
type = PREF_TYPE(prefix);
- switch(type){
+ switch (type) {
case TYPE_MAIN:
- strcpy(globtype,"");
- switch(tag){
+ strcpy(globtype, "");
+ switch (tag) {
case TAG_MAIN_INPUT:
/*
@@ -274,19 +272,17 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
* min/max values
*/
- maintype='I';
- if (data==2){
- strcpy(globtype,"Variable");
- }
- if (data==3){
- strcpy(globtype,"Var|Const");
- }
+ maintype = 'I';
+ if (data == 2)
+ strcpy(globtype, "Variable");
+ else if (data == 3)
+ strcpy(globtype, "Var|Const");
dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits",
- globalval[TAG_GLOB_REPORT_ID],inputnum,
- globalval[TAG_GLOB_LOG_MAX],globalval[TAG_GLOB_LOG_MAX],
- globalval[TAG_GLOB_LOG_MIN],globalval[TAG_GLOB_LOG_MIN],
- (globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]));
+ globalval[TAG_GLOB_REPORT_ID], inputnum,
+ globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
+ globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
+ globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
/*
@@ -295,43 +291,43 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
that, we look for everything else by
local usage value
*/
- switch (inputnum){
+ switch (inputnum) {
case 0: /* X coord */
- dbg("GER: X Usage: 0x%x",usage);
- if (device->max_X == 0){
+ dbg("GER: X Usage: 0x%x", usage);
+ if (device->max_X == 0) {
device->max_X = globalval[TAG_GLOB_LOG_MAX];
device->min_X = globalval[TAG_GLOB_LOG_MIN];
}
-
break;
+
case 1: /* Y coord */
- dbg("GER: Y Usage: 0x%x",usage);
- if (device->max_Y == 0){
+ dbg("GER: Y Usage: 0x%x", usage);
+ if (device->max_Y == 0) {
device->max_Y = globalval[TAG_GLOB_LOG_MAX];
device->min_Y = globalval[TAG_GLOB_LOG_MIN];
}
break;
+
default:
/* Tilt X */
- if (usage == DIGITIZER_USAGE_TILT_X){
- if (device->maxtilt_X == 0){
+ if (usage == DIGITIZER_USAGE_TILT_X) {
+ if (device->maxtilt_X == 0) {
device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
}
}
/* Tilt Y */
- if (usage == DIGITIZER_USAGE_TILT_Y){
- if (device->maxtilt_Y == 0){
+ if (usage == DIGITIZER_USAGE_TILT_Y) {
+ if (device->maxtilt_Y == 0) {
device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
}
}
-
/* Pressure */
- if (usage == DIGITIZER_USAGE_TIP_PRESSURE){
- if (device->maxpressure == 0){
+ if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
+ if (device->maxpressure == 0) {
device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
device->minpressure = globalval[TAG_GLOB_LOG_MIN];
}
@@ -341,214 +337,226 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
}
inputnum++;
-
-
break;
+
case TAG_MAIN_OUTPUT:
- maintype='O';
+ maintype = 'O';
break;
+
case TAG_MAIN_FEATURE:
- maintype='F';
+ maintype = 'F';
break;
+
case TAG_MAIN_COL_START:
- maintype='S';
+ maintype = 'S';
- if (data==0){
+ if (data == 0) {
dbg("======>>>>>> Physical");
- strcpy(globtype,"Physical");
- }else{
+ strcpy(globtype, "Physical");
+ } else
dbg("======>>>>>>");
- }
/* Indent the debug output */
indent++;
- for (x=0;x<indent;x++){
- indentstr[x]='-';
- }
- indentstr[x]=0;
+ for (x = 0; x < indent; x++)
+ indentstr[x] = '-';
+ indentstr[x] = 0;
/* Save global tags */
- for (x=0;x<TAG_GLOB_MAX;x++){
+ for (x = 0; x < TAG_GLOB_MAX; x++)
oldval[x] = globalval[x];
- }
break;
+
case TAG_MAIN_COL_END:
dbg("<<<<<<======");
- maintype='E';
+ maintype = 'E';
indent--;
- for (x=0;x<indent;x++){
- indentstr[x]='-';
- }
- indentstr[x]=0;
+ for (x = 0; x < indent; x++)
+ indentstr[x] = '-';
+ indentstr[x] = 0;
/* Copy global tags back */
- for (x=0;x<TAG_GLOB_MAX;x++){
+ for (x = 0; x < TAG_GLOB_MAX; x++)
globalval[x] = oldval[x];
- }
break;
}
- switch (size){
+ switch (size) {
case 1:
dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
- indentstr,tag,maintype,size,globtype,data);
+ indentstr, tag, maintype, size, globtype, data);
break;
+
case 2:
dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
- indentstr,tag,maintype,size,globtype, data16);
+ indentstr, tag, maintype, size, globtype, data16);
break;
+
case 4:
dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
- indentstr,tag,maintype,size,globtype,data32);
+ indentstr, tag, maintype, size, globtype, data32);
break;
}
break;
+
case TYPE_GLOBAL:
- switch(tag){
+ switch (tag) {
case TAG_GLOB_USAGE:
/*
* First time we hit the global usage tag,
* it should tell us the type of device
*/
- if (device->usage == 0){
+ if (device->usage == 0)
device->usage = data;
- }
- strcpy(globtype,"USAGE");
+
+ strcpy(globtype, "USAGE");
break;
- case TAG_GLOB_LOG_MIN :
- strcpy(globtype,"LOG_MIN");
+
+ case TAG_GLOB_LOG_MIN:
+ strcpy(globtype, "LOG_MIN");
break;
- case TAG_GLOB_LOG_MAX :
- strcpy(globtype,"LOG_MAX");
+
+ case TAG_GLOB_LOG_MAX:
+ strcpy(globtype, "LOG_MAX");
break;
- case TAG_GLOB_PHYS_MIN :
- strcpy(globtype,"PHYS_MIN");
+
+ case TAG_GLOB_PHYS_MIN:
+ strcpy(globtype, "PHYS_MIN");
break;
- case TAG_GLOB_PHYS_MAX :
- strcpy(globtype,"PHYS_MAX");
+
+ case TAG_GLOB_PHYS_MAX:
+ strcpy(globtype, "PHYS_MAX");
break;
- case TAG_GLOB_UNIT_EXP :
- strcpy(globtype,"EXP");
+
+ case TAG_GLOB_UNIT_EXP:
+ strcpy(globtype, "EXP");
break;
- case TAG_GLOB_UNIT :
- strcpy(globtype,"UNIT");
+
+ case TAG_GLOB_UNIT:
+ strcpy(globtype, "UNIT");
break;
- case TAG_GLOB_REPORT_SZ :
- strcpy(globtype,"REPORT_SZ");
+
+ case TAG_GLOB_REPORT_SZ:
+ strcpy(globtype, "REPORT_SZ");
break;
- case TAG_GLOB_REPORT_ID :
- strcpy(globtype,"REPORT_ID");
+
+ case TAG_GLOB_REPORT_ID:
+ strcpy(globtype, "REPORT_ID");
/* New report, restart numbering */
- inputnum=0;
+ inputnum = 0;
break;
+
case TAG_GLOB_REPORT_CNT:
- strcpy(globtype,"REPORT_CNT");
+ strcpy(globtype, "REPORT_CNT");
break;
- case TAG_GLOB_PUSH :
- strcpy(globtype,"PUSH");
+
+ case TAG_GLOB_PUSH:
+ strcpy(globtype, "PUSH");
break;
+
case TAG_GLOB_POP:
- strcpy(globtype,"POP");
+ strcpy(globtype, "POP");
break;
}
-
/* Check to make sure we have a good tag number
so we don't overflow array */
- if (tag < TAG_GLOB_MAX){
- switch (size){
+ if (tag < TAG_GLOB_MAX) {
+ switch (size) {
case 1:
- dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data);
- globalval[tag]=data;
+ dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
+ indentstr, globtype, tag, size, data);
+ globalval[tag] = data;
break;
+
case 2:
- dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data16);
- globalval[tag]=data16;
+ dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
+ indentstr, globtype, tag, size, data16);
+ globalval[tag] = data16;
break;
+
case 4:
- dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data32);
- globalval[tag]=data32;
+ dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
+ indentstr, globtype, tag, size, data32);
+ globalval[tag] = data32;
break;
}
- }else{
+ } else {
dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ",
- indentstr,tag,size);
+ indentstr, tag, size);
}
-
-
break;
case TYPE_LOCAL:
- switch(tag){
+ switch (tag) {
case TAG_GLOB_USAGE:
- strcpy(globtype,"USAGE");
+ strcpy(globtype, "USAGE");
/* Always 1 byte */
usage = data;
break;
- case TAG_GLOB_LOG_MIN :
- strcpy(globtype,"MIN");
+
+ case TAG_GLOB_LOG_MIN:
+ strcpy(globtype, "MIN");
break;
- case TAG_GLOB_LOG_MAX :
- strcpy(globtype,"MAX");
+
+ case TAG_GLOB_LOG_MAX:
+ strcpy(globtype, "MAX");
break;
+
default:
- strcpy(globtype,"UNKNOWN");
+ strcpy(globtype, "UNKNOWN");
+ break;
}
- switch (size){
+ switch (size) {
case 1:
dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
- indentstr,tag,globtype,size,data);
+ indentstr, tag, globtype, size, data);
break;
+
case 2:
dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
- indentstr,tag,globtype,size,data16);
+ indentstr, tag, globtype, size, data16);
break;
+
case 4:
dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
- indentstr,tag,globtype,size,data32);
+ indentstr, tag, globtype, size, data32);
break;
}
break;
}
-
}
-
}
-
-
/* INPUT DRIVER Routines */
-
/*
- * Called when opening the input device. This will submit the URB to
- * the usb system so we start getting reports
+ * Called when opening the input device. This will submit the URB to
+ * the usb system so we start getting reports
*/
static int gtco_input_open(struct input_dev *inputdev)
{
- struct gtco *device;
- device = inputdev->private;
+ struct gtco *device = input_get_drvdata(inputdev);
device->urbinfo->dev = device->usbdev;
- if (usb_submit_urb(device->urbinfo, GFP_KERNEL)) {
+ if (usb_submit_urb(device->urbinfo, GFP_KERNEL))
return -EIO;
- }
+
return 0;
}
-/**
- Called when closing the input device. This will unlink the URB
-*/
+/*
+ * Called when closing the input device. This will unlink the URB
+ */
static void gtco_input_close(struct input_dev *inputdev)
{
- struct gtco *device = inputdev->private;
+ struct gtco *device = input_get_drvdata(inputdev);
usb_kill_urb(device->urbinfo);
-
}
@@ -560,19 +568,16 @@ static void gtco_input_close(struct input_dev *inputdev)
* placed in the struct gtco structure
*
*/
-static void gtco_setup_caps(struct input_dev *inputdev)
+static void gtco_setup_caps(struct input_dev *inputdev)
{
- struct gtco *device = inputdev->private;
-
+ struct gtco *device = input_get_drvdata(inputdev);
/* Which events */
inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
-
/* Misc event menu block */
inputdev->mscbit[0] = BIT(MSC_SCAN)|BIT(MSC_SERIAL)|BIT(MSC_RAW) ;
-
/* Absolute values based on HID report info */
input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X,
0, 0);
@@ -590,17 +595,12 @@ static void gtco_setup_caps(struct input_dev *inputdev)
input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure,
device->maxpressure, 0, 0);
-
/* Transducer */
- input_set_abs_params(inputdev, ABS_MISC, 0,0xFF, 0, 0);
-
+ input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0);
}
-
-
/* USB Routines */
-
/*
* URB callback routine. Called when we get IRQ reports from the
* digitizer.
@@ -610,9 +610,7 @@ static void gtco_setup_caps(struct input_dev *inputdev)
*/
static void gtco_urb_callback(struct urb *urbinfo)
{
-
-
- struct gtco *device = urbinfo->context;
+ struct gtco *device = urbinfo->context;
struct input_dev *inputdev;
int rc;
u32 val = 0;
@@ -621,19 +619,20 @@ static void gtco_urb_callback(struct urb *urbinfo)
inputdev = device->inputdevice;
-
/* Was callback OK? */
- if ((urbinfo->status == -ECONNRESET ) ||
- (urbinfo->status == -ENOENT ) ||
- (urbinfo->status == -ESHUTDOWN )){
+ if (urbinfo->status == -ECONNRESET ||
+ urbinfo->status == -ENOENT ||
+ urbinfo->status == -ESHUTDOWN) {
/* Shutdown is occurring. Return and don't queue up any more */
return;
}
- if (urbinfo->status != 0 ) {
- /* Some unknown error. Hopefully temporary. Just go and */
- /* requeue an URB */
+ if (urbinfo->status != 0) {
+ /*
+ * Some unknown error. Hopefully temporary. Just go and
+ * requeue an URB
+ */
goto resubmit;
}
@@ -642,10 +641,9 @@ static void gtco_urb_callback(struct urb *urbinfo)
*/
/* PID dependent when we interpret the report */
- if ((inputdev->id.product == PID_1000 )||
- (inputdev->id.product == PID_1001 )||
- (inputdev->id.product == PID_1002 ))
- {
+ if (inputdev->id.product == PID_1000 ||
+ inputdev->id.product == PID_1001 ||
+ inputdev->id.product == PID_1002) {
/*
* Switch on the report ID
@@ -653,10 +651,10 @@ static void gtco_urb_callback(struct urb *urbinfo)
* the report number. We can just fall through the case
* statements if we start with the highest number report
*/
- switch(device->buffer[0]){
+ switch (device->buffer[0]) {
case 5:
/* Pressure is 9 bits */
- val = ((u16)(device->buffer[8]) << 1);
+ val = ((u16)(device->buffer[8]) << 1);
val |= (u16)(device->buffer[7] >> 7);
input_report_abs(inputdev, ABS_PRESSURE,
device->buffer[8]);
@@ -664,7 +662,6 @@ static void gtco_urb_callback(struct urb *urbinfo)
/* Mask out the Y tilt value used for pressure */
device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
-
/* Fall thru */
case 4:
/* Tilt */
@@ -684,11 +681,10 @@ static void gtco_urb_callback(struct urb *urbinfo)
input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned);
/* Fall thru */
-
case 2:
case 3:
/* Convert buttons, only 5 bits possible */
- val = (device->buffer[5])&MASK_BUTTON;
+ val = (device->buffer[5]) & MASK_BUTTON;
/* We don't apply any meaning to the bitmask,
just report */
@@ -696,132 +692,109 @@ static void gtco_urb_callback(struct urb *urbinfo)
/* Fall thru */
case 1:
-
/* All reports have X and Y coords in the same place */
- val = le16_to_cpu(get_unaligned((__le16 *) &(device->buffer[1])));
+ val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1]));
input_report_abs(inputdev, ABS_X, val);
- val = le16_to_cpu(get_unaligned((__le16 *) &(device->buffer[3])));
+ val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3]));
input_report_abs(inputdev, ABS_Y, val);
-
/* Ditto for proximity bit */
- if (device->buffer[5]& MASK_INRANGE){
- val = 1;
- }else{
- val=0;
- }
+ val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
input_report_abs(inputdev, ABS_DISTANCE, val);
-
/* Report 1 is an exception to how we handle buttons */
/* Buttons are an index, not a bitmask */
- if (device->buffer[0] == 1){
+ if (device->buffer[0] == 1) {
- /* Convert buttons, 5 bit index */
- /* Report value of index set as one,
- the rest as 0 */
- val = device->buffer[5]& MASK_BUTTON;
+ /*
+ * Convert buttons, 5 bit index
+ * Report value of index set as one,
+ * the rest as 0
+ */
+ val = device->buffer[5] & MASK_BUTTON;
dbg("======>>>>>>REPORT 1: val 0x%X(%d)",
- val,val);
+ val, val);
/*
* We don't apply any meaning to the button
* index, just report it
*/
input_event(inputdev, EV_MSC, MSC_SERIAL, val);
-
-
}
-
break;
+
case 7:
/* Menu blocks */
input_event(inputdev, EV_MSC, MSC_SCAN,
device->buffer[1]);
-
-
break;
-
}
-
-
}
+
/* Other pid class */
- if ((inputdev->id.product == PID_400 )||
- (inputdev->id.product == PID_401 ))
- {
+ if (inputdev->id.product == PID_400 ||
+ inputdev->id.product == PID_401) {
/* Report 2 */
- if (device->buffer[0] == 2){
+ if (device->buffer[0] == 2) {
/* Menu blocks */
- input_event(inputdev, EV_MSC, MSC_SCAN,
- device->buffer[1]);
+ input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
}
/* Report 1 */
- if (device->buffer[0] == 1){
+ if (device->buffer[0] == 1) {
char buttonbyte;
-
/* IF X max > 64K, we still a bit from the y report */
- if (device->max_X > 0x10000){
+ if (device->max_X > 0x10000) {
- val = (u16)(((u16)(device->buffer[2]<<8))|((u8)(device->buffer[1])));
- val |= (u32)(((u8)device->buffer[3]&0x1)<< 16);
+ val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
+ val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
input_report_abs(inputdev, ABS_X, val);
- le_buffer[0] = (u8)((u8)(device->buffer[3])>>1);
- le_buffer[0] |= (u8)((device->buffer[3]&0x1)<<7);
-
- le_buffer[1] = (u8)(device->buffer[4]>>1);
- le_buffer[1] |= (u8)((device->buffer[5]&0x1)<<7);
+ le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1);
+ le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
- val = le16_to_cpu(get_unaligned((__le16 *)(le_buffer)));
+ le_buffer[1] = (u8)(device->buffer[4] >> 1);
+ le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
+ val = le16_to_cpu(get_unaligned((__le16 *)le_buffer));
input_report_abs(inputdev, ABS_Y, val);
-
/*
* Shift the button byte right by one to
* make it look like the standard report
*/
- buttonbyte = (device->buffer[5])>>1;
- }else{
+ buttonbyte = device->buffer[5] >> 1;
+ } else {
- val = le16_to_cpu(get_unaligned((__le16 *) (&(device->buffer[1]))));
+ val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1]));
input_report_abs(inputdev, ABS_X, val);
- val = le16_to_cpu(get_unaligned((__le16 *) (&(device->buffer[3]))));
+ val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3]));
input_report_abs(inputdev, ABS_Y, val);
buttonbyte = device->buffer[5];
-
}
-
/* BUTTONS and PROXIMITY */
- if (buttonbyte& MASK_INRANGE){
- val = 1;
- }else{
- val=0;
- }
+ val = buttonbyte & MASK_INRANGE ? 1 : 0;
input_report_abs(inputdev, ABS_DISTANCE, val);
/* Convert buttons, only 4 bits possible */
- val = buttonbyte&0x0F;
+ val = buttonbyte & 0x0F;
#ifdef USE_BUTTONS
- for ( i=0;i<5;i++){
- input_report_key(inputdev, BTN_DIGI+i,val&(1<<i));
- }
+ for (i = 0; i < 5; i++)
+ input_report_key(inputdev, BTN_DIGI + i, val & (1 << i));
#else
/* We don't apply any meaning to the bitmask, just report */
input_event(inputdev, EV_MSC, MSC_SERIAL, val);
#endif
+
/* TRANSDUCER */
input_report_abs(inputdev, ABS_MISC, device->buffer[6]);
-
}
}
@@ -833,10 +806,8 @@ static void gtco_urb_callback(struct urb *urbinfo)
resubmit:
rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
- if (rc != 0) {
- err("usb_submit_urb failed rc=0x%x",rc);
- }
-
+ if (rc != 0)
+ err("usb_submit_urb failed rc=0x%x", rc);
}
/*
@@ -854,58 +825,46 @@ static int gtco_probe(struct usb_interface *usbinterface,
const struct usb_device_id *id)
{
- struct gtco *device = NULL;
- char path[PATHLENGTH];
- struct input_dev *inputdev;
+ struct gtco *gtco;
+ struct input_dev *input_dev;
struct hid_descriptor *hid_desc;
- char *report;
- int result=0, retry;
+ char *report = NULL;
+ int result = 0, retry;
+ int error;
struct usb_endpoint_descriptor *endpoint;
/* Allocate memory for device structure */
- device = kzalloc(sizeof(struct gtco), GFP_KERNEL);
- if (device == NULL) {
+ gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!gtco || !input_dev) {
err("No more memory");
- return -ENOMEM;
+ error = -ENOMEM;
+ goto err_free_devs;
}
-
- device->inputdevice = input_allocate_device();
- if (!device->inputdevice){
- kfree(device);
- err("No more memory");
- return -ENOMEM;
- }
-
- /* Get pointer to the input device */
- inputdev = device->inputdevice;
+ /* Set pointer to the input device */
+ gtco->inputdevice = input_dev;
/* Save interface information */
- device->usbdev = usb_get_dev(interface_to_usbdev(usbinterface));
-
+ gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface));
/* Allocate some data for incoming reports */
- device->buffer = usb_buffer_alloc(device->usbdev, REPORT_MAX_SIZE,
- GFP_KERNEL, &(device->buf_dma));
- if (!device->buffer){
- input_free_device(device->inputdevice);
- kfree(device);
- err("No more memory");
- return -ENOMEM;
+ gtco->buffer = usb_buffer_alloc(gtco->usbdev, REPORT_MAX_SIZE,
+ GFP_KERNEL, &gtco->buf_dma);
+ if (!gtco->buffer) {
+ err("No more memory for us buffers");
+ error = -ENOMEM;
+ goto err_free_devs;
}
/* Allocate URB for reports */
- device->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
- if (!device->urbinfo) {
- usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
- device->buffer, device->buf_dma);
- input_free_device(device->inputdevice);
- kfree(device);
- err("No more memory");
+ gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
+ if (!gtco->urbinfo) {
+ err("Failed to allocate URB");
return -ENOMEM;
+ goto err_free_buf;
}
-
/*
* The endpoint is always altsetting 0, we know this since we know
* this device only has one interrupt endpoint
@@ -913,51 +872,43 @@ static int gtco_probe(struct usb_interface *usbinterface,
endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
/* Some debug */
- dbg("gtco # interfaces: %d",usbinterface->num_altsetting);
- dbg("num endpoints: %d",usbinterface->cur_altsetting->desc.bNumEndpoints);
- dbg("interface class: %d",usbinterface->cur_altsetting->desc.bInterfaceClass);
- dbg("endpoint: attribute:0x%x type:0x%x",endpoint->bmAttributes,endpoint->bDescriptorType);
+ dbg("gtco # interfaces: %d", usbinterface->num_altsetting);
+ dbg("num endpoints: %d", usbinterface->cur_altsetting->desc.bNumEndpoints);
+ dbg("interface class: %d", usbinterface->cur_altsetting->desc.bInterfaceClass);
+ dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType);
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)
dbg("endpoint: we have interrupt endpoint\n");
- dbg("endpoint extra len:%d ",usbinterface->altsetting[0].extralen);
-
-
+ dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen);
/*
* Find the HID descriptor so we can find out the size of the
* HID report descriptor
*/
if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
- HID_DEVICE_TYPE,&hid_desc) != 0){
+ HID_DEVICE_TYPE, &hid_desc) != 0){
err("Can't retrieve exta USB descriptor to get hid report descriptor length");
- usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
- device->buffer, device->buf_dma);
- input_free_device(device->inputdevice);
- kfree(device);
- return -EIO;
+ error = -EIO;
+ goto err_free_urb;
}
dbg("Extra descriptor success: type:%d len:%d",
hid_desc->bDescriptorType, hid_desc->wDescriptorLength);
- if (!(report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL))) {
- usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
- device->buffer, device->buf_dma);
-
- input_free_device(device->inputdevice);
- kfree(device);
- err("No more memory");
- return -ENOMEM;
+ report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+ if (!report) {
+ err("No more memory for report");
+ error = -ENOMEM;
+ goto err_free_urb;
}
/* Couple of tries to get reply */
- for (retry=0;retry<3;retry++) {
- result = usb_control_msg(device->usbdev,
- usb_rcvctrlpipe(device->usbdev, 0),
+ for (retry = 0; retry < 3; retry++) {
+ result = usb_control_msg(gtco->usbdev,
+ usb_rcvctrlpipe(gtco->usbdev, 0),
USB_REQ_GET_DESCRIPTOR,
USB_RECIP_INTERFACE | USB_DIR_IN,
- (REPORT_DEVICE_TYPE << 8),
+ REPORT_DEVICE_TYPE << 8,
0, /* interface */
report,
hid_desc->wDescriptorLength,
@@ -969,72 +920,76 @@ static int gtco_probe(struct usb_interface *usbinterface,
/* If we didn't get the report, fail */
dbg("usb_control_msg result: :%d", result);
- if (result != hid_desc->wDescriptorLength){
- kfree(report);
- usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
- device->buffer, device->buf_dma);
- input_free_device(device->inputdevice);
- kfree(device);
+ if (result != hid_desc->wDescriptorLength) {
err("Failed to get HID Report Descriptor of size: %d",
hid_desc->wDescriptorLength);
- return -EIO;
+ error = -EIO;
+ goto err_free_urb;
}
-
/* Now we parse the report */
- parse_hid_report_descriptor(device,report,result);
+ parse_hid_report_descriptor(gtco, report, result);
/* Now we delete it */
kfree(report);
/* Create a device file node */
- usb_make_path(device->usbdev, path, PATHLENGTH);
- sprintf(device->usbpath, "%s/input0", path);
-
+ usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
+ strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
/* Set Input device functions */
- inputdev->open = gtco_input_open;
- inputdev->close = gtco_input_close;
+ input_dev->open = gtco_input_open;
+ input_dev->close = gtco_input_close;
/* Set input device information */
- inputdev->name = "GTCO_CalComp";
- inputdev->phys = device->usbpath;
- inputdev->private = device;
+ input_dev->name = "GTCO_CalComp";
+ input_dev->phys = gtco->usbpath;
+ input_set_drvdata(input_dev, gtco);
/* Now set up all the input device capabilities */
- gtco_setup_caps(inputdev);
+ gtco_setup_caps(input_dev);
/* Set input device required ID information */
- usb_to_input_id(device->usbdev, &device->inputdevice->id);
- inputdev->cdev.dev = &usbinterface->dev;
+ usb_to_input_id(gtco->usbdev, &input_dev->id);
+ input_dev->dev.parent = &usbinterface->dev;
/* Setup the URB, it will be posted later on open of input device */
endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
- usb_fill_int_urb(device->urbinfo,
- device->usbdev,
- usb_rcvintpipe(device->usbdev,
+ usb_fill_int_urb(gtco->urbinfo,
+ gtco->usbdev,
+ usb_rcvintpipe(gtco->usbdev,
endpoint->bEndpointAddress),
- device->buffer,
+ gtco->buffer,
REPORT_MAX_SIZE,
gtco_urb_callback,
- device,
+ gtco,
endpoint->bInterval);
- device->urbinfo->transfer_dma = device->buf_dma;
- device->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
+ gtco->urbinfo->transfer_dma = gtco->buf_dma;
+ gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- /* Save device pointer in USB interface device */
- usb_set_intfdata(usbinterface, device);
+ /* Save gtco pointer in USB interface gtco */
+ usb_set_intfdata(usbinterface, gtco);
/* All done, now register the input device */
- input_register_device(inputdev);
+ error = input_register_device(input_dev);
+ if (error)
+ goto err_free_urb;
- info( "gtco driver created usb: %s\n", path);
return 0;
+ err_free_urb:
+ usb_free_urb(gtco->urbinfo);
+ err_free_buf:
+ usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
+ gtco->buffer, gtco->buf_dma);
+ err_free_devs:
+ kfree(report);
+ input_free_device(input_dev);
+ kfree(gtco);
+ return error;
}
/*
@@ -1044,47 +999,46 @@ static int gtco_probe(struct usb_interface *usbinterface,
*/
static void gtco_disconnect(struct usb_interface *interface)
{
-
/* Grab private device ptr */
- struct gtco *device = usb_get_intfdata (interface);
+ struct gtco *gtco = usb_get_intfdata(interface);
/* Now reverse all the registration stuff */
- if (device) {
- input_unregister_device(device->inputdevice);
- usb_kill_urb(device->urbinfo);
- usb_free_urb(device->urbinfo);
- usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
- device->buffer, device->buf_dma);
- kfree(device);
+ if (gtco) {
+ input_unregister_device(gtco->inputdevice);
+ usb_kill_urb(gtco->urbinfo);
+ usb_free_urb(gtco->urbinfo);
+ usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
+ gtco->buffer, gtco->buf_dma);
+ kfree(gtco);
}
info("gtco driver disconnected");
}
-
/* STANDARD MODULE LOAD ROUTINES */
static struct usb_driver gtco_driverinfo_table = {
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
- .owner = THIS_MODULE,
-#endif
- .name = "gtco",
- .id_table = gtco_usbid_table,
- .probe = gtco_probe,
- .disconnect = gtco_disconnect,
+ .name = "gtco",
+ .id_table = gtco_usbid_table,
+ .probe = gtco_probe,
+ .disconnect = gtco_disconnect,
};
+
/*
* Register this module with the USB subsystem
*/
static int __init gtco_init(void)
{
- int rc;
- rc = usb_register(&gtco_driverinfo_table);
- if (rc) {
- err("usb_register() failed rc=0x%x", rc);
+ int error;
+
+ error = usb_register(&gtco_driverinfo_table);
+ if (error) {
+ err("usb_register() failed rc=0x%x", error);
+ return error;
}
- printk("GTCO usb driver version: %s",GTCO_VERSION);
- return rc;
+
+ printk("GTCO usb driver version: %s", GTCO_VERSION);
+ return 0;
}
/*
@@ -1095,7 +1049,7 @@ static void __exit gtco_exit(void)
usb_deregister(&gtco_driverinfo_table);
}
-module_init (gtco_init);
-module_exit (gtco_exit);
+module_init(gtco_init);
+module_exit(gtco_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
deleted file mode 100644
index aac968a..0000000
--- a/drivers/usb/input/itmtouch.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/******************************************************************************
- * itmtouch.c -- Driver for ITM touchscreen panel
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Based upon original work by Chris Collins <xfire-itmtouch@xware.cx>.
- *
- * Kudos to ITM for providing me with the datasheet for the panel,
- * even though it was a day later than I had finished writing this
- * driver.
- *
- * It has meant that I've been able to correct my interpretation of the
- * protocol packets however.
- *
- * CC -- 2003/9/29
- *
- * History
- * 1.0 & 1.1 2003 (CC) vojtech@suse.cz
- * Original version for 2.4.x kernels
- *
- * 1.2 02/03/2005 (HCE) hc@mivu.no
- * Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
- * Unfortunately no calibration support at this time.
- *
- * 1.2.1 09/03/2005 (HCE) hc@mivu.no
- * Code cleanup and adjusting syntax to start matching kernel standards
- *
- * 1.2.2 10/05/2006 (MJA) massad@gmail.com
- * Flag for detecting if the screen was being touch was incorrectly
- * inverted, so no touch events were being detected.
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-
-/* only an 8 byte buffer necessary for a single packet */
-#define ITM_BUFSIZE 8
-#define PATH_SIZE 64
-
-#define USB_VENDOR_ID_ITMINC 0x0403
-#define USB_PRODUCT_ID_TOUCHPANEL 0xf9e9
-
-#define DRIVER_AUTHOR "Hans-Christian Egtvedt <hc@mivu.no>"
-#define DRIVER_VERSION "v1.2.2"
-#define DRIVER_DESC "USB ITM Inc Touch Panel Driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE( DRIVER_LICENSE );
-
-struct itmtouch_dev {
- struct usb_device *usbdev; /* usb device */
- struct input_dev *inputdev; /* input device */
- struct urb *readurb; /* urb */
- char rbuf[ITM_BUFSIZE]; /* data */
- int users;
- char name[128];
- char phys[64];
-};
-
-static struct usb_device_id itmtouch_ids [] = {
- { USB_DEVICE(USB_VENDOR_ID_ITMINC, USB_PRODUCT_ID_TOUCHPANEL) },
- { }
-};
-
-static void itmtouch_irq(struct urb *urb)
-{
- struct itmtouch_dev *itmtouch = urb->context;
- unsigned char *data = urb->transfer_buffer;
- struct input_dev *dev = itmtouch->inputdev;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ETIME:
- /* this urb is timing out */
- dbg("%s - urb timed out - was the device unplugged?",
- __FUNCTION__);
- return;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- goto exit;
- }
-
- /* if pressure has been released, then don't report X/Y */
- if (!(data[7] & 0x20)) {
- input_report_abs(dev, ABS_X, (data[0] & 0x1F) << 7 | (data[3] & 0x7F));
- input_report_abs(dev, ABS_Y, (data[1] & 0x1F) << 7 | (data[4] & 0x7F));
- }
-
- input_report_abs(dev, ABS_PRESSURE, (data[2] & 1) << 7 | (data[5] & 0x7F));
- input_report_key(dev, BTN_TOUCH, ~data[7] & 0x20);
- input_sync(dev);
-
-exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- printk(KERN_ERR "%s - usb_submit_urb failed with result: %d",
- __FUNCTION__, retval);
-}
-
-static int itmtouch_open(struct input_dev *input)
-{
- struct itmtouch_dev *itmtouch = input->private;
-
- itmtouch->readurb->dev = itmtouch->usbdev;
-
- if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL))
- return -EIO;
-
- return 0;
-}
-
-static void itmtouch_close(struct input_dev *input)
-{
- struct itmtouch_dev *itmtouch = input->private;
-
- usb_kill_urb(itmtouch->readurb);
-}
-
-static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct itmtouch_dev *itmtouch;
- struct input_dev *input_dev;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_device *udev = interface_to_usbdev(intf);
- unsigned int pipe;
- unsigned int maxp;
-
- interface = intf->cur_altsetting;
- endpoint = &interface->endpoint[0].desc;
-
- itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!itmtouch || !input_dev) {
- err("%s - Out of memory.", __FUNCTION__);
- goto fail;
- }
-
- itmtouch->usbdev = udev;
- itmtouch->inputdev = input_dev;
-
- if (udev->manufacturer)
- strlcpy(itmtouch->name, udev->manufacturer, sizeof(itmtouch->name));
-
- if (udev->product) {
- if (udev->manufacturer)
- strlcat(itmtouch->name, " ", sizeof(itmtouch->name));
- strlcat(itmtouch->name, udev->product, sizeof(itmtouch->name));
- }
-
- if (!strlen(itmtouch->name))
- sprintf(itmtouch->name, "USB ITM touchscreen");
-
- usb_make_path(udev, itmtouch->phys, sizeof(itmtouch->phys));
- strlcpy(itmtouch->phys, "/input0", sizeof(itmtouch->phys));
-
- input_dev->name = itmtouch->name;
- input_dev->phys = itmtouch->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = itmtouch;
-
- input_dev->open = itmtouch_open;
- input_dev->close = itmtouch_close;
-
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- /* device limits */
- /* as specified by the ITM datasheet, X and Y are 12bit,
- * Z (pressure) is 8 bit. However, the fields are defined up
- * to 14 bits for future possible expansion.
- */
- input_set_abs_params(input_dev, ABS_X, 0, 0x0FFF, 2, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, 0x0FFF, 2, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 2, 0);
-
- /* initialise the URB so we can read from the transport stream */
- pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
- maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-
- if (maxp > ITM_BUFSIZE)
- maxp = ITM_BUFSIZE;
-
- itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
- if (!itmtouch->readurb) {
- dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
- goto fail;
- }
-
- usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf,
- maxp, itmtouch_irq, itmtouch, endpoint->bInterval);
-
- input_register_device(itmtouch->inputdev);
-
- usb_set_intfdata(intf, itmtouch);
-
- return 0;
-
- fail: input_free_device(input_dev);
- kfree(itmtouch);
- return -ENOMEM;
-}
-
-static void itmtouch_disconnect(struct usb_interface *intf)
-{
- struct itmtouch_dev *itmtouch = usb_get_intfdata(intf);
-
- usb_set_intfdata(intf, NULL);
-
- if (itmtouch) {
- input_unregister_device(itmtouch->inputdev);
- usb_kill_urb(itmtouch->readurb);
- usb_free_urb(itmtouch->readurb);
- kfree(itmtouch);
- }
-}
-
-MODULE_DEVICE_TABLE(usb, itmtouch_ids);
-
-static struct usb_driver itmtouch_driver = {
- .name = "itmtouch",
- .probe = itmtouch_probe,
- .disconnect = itmtouch_disconnect,
- .id_table = itmtouch_ids,
-};
-
-static int __init itmtouch_init(void)
-{
- info(DRIVER_DESC " " DRIVER_VERSION);
- info(DRIVER_AUTHOR);
- return usb_register(&itmtouch_driver);
-}
-
-static void __exit itmtouch_exit(void)
-{
- usb_deregister(&itmtouch_driver);
-}
-
-module_init(itmtouch_init);
-module_exit(itmtouch_exit);
diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c
index fedbcb1..c4781b9 100644
--- a/drivers/usb/input/kbtab.c
+++ b/drivers/usb/input/kbtab.c
@@ -100,7 +100,7 @@ MODULE_DEVICE_TABLE(usb, kbtab_ids);
static int kbtab_open(struct input_dev *dev)
{
- struct kbtab *kbtab = dev->private;
+ struct kbtab *kbtab = input_get_drvdata(dev);
kbtab->irq->dev = kbtab->usbdev;
if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
@@ -111,7 +111,7 @@ static int kbtab_open(struct input_dev *dev)
static void kbtab_close(struct input_dev *dev)
{
- struct kbtab *kbtab = dev->private;
+ struct kbtab *kbtab = input_get_drvdata(dev);
usb_kill_urb(kbtab->irq);
}
@@ -122,6 +122,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
struct usb_endpoint_descriptor *endpoint;
struct kbtab *kbtab;
struct input_dev *input_dev;
+ int error = -ENOMEM;
kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -145,8 +146,9 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
input_dev->name = "KB Gear Tablet";
input_dev->phys = kbtab->phys;
usb_to_input_id(dev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = kbtab;
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, kbtab);
input_dev->open = kbtab_open;
input_dev->close = kbtab_close;
@@ -168,15 +170,19 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
kbtab->irq->transfer_dma = kbtab->data_dma;
kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(kbtab->dev);
+ error = input_register_device(kbtab->dev);
+ if (error)
+ goto fail3;
usb_set_intfdata(intf, kbtab);
+
return 0;
-fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
-fail1: input_free_device(input_dev);
+ fail3: usb_free_urb(kbtab->irq);
+ fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
+ fail1: input_free_device(input_dev);
kfree(kbtab);
- return -ENOMEM;
+ return error;
}
static void kbtab_disconnect(struct usb_interface *intf)
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index 98bd323..1bffc9f 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -394,7 +394,7 @@ resubmit:
static int keyspan_open(struct input_dev *dev)
{
- struct usb_keyspan *remote = dev->private;
+ struct usb_keyspan *remote = input_get_drvdata(dev);
remote->irq_urb->dev = remote->udev;
if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
@@ -405,7 +405,7 @@ static int keyspan_open(struct input_dev *dev)
static void keyspan_close(struct input_dev *dev)
{
- struct usb_keyspan *remote = dev->private;
+ struct usb_keyspan *remote = input_get_drvdata(dev);
usb_kill_urb(remote->irq_urb);
}
@@ -437,7 +437,7 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
struct usb_endpoint_descriptor *endpoint;
struct usb_keyspan *remote;
struct input_dev *input_dev;
- int i, retval;
+ int i, error;
endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
if (!endpoint)
@@ -446,7 +446,7 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
remote = kzalloc(sizeof(*remote), GFP_KERNEL);
input_dev = input_allocate_device();
if (!remote || !input_dev) {
- retval = -ENOMEM;
+ error = -ENOMEM;
goto fail1;
}
@@ -458,19 +458,19 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
if (!remote->in_buffer) {
- retval = -ENOMEM;
+ error = -ENOMEM;
goto fail1;
}
remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!remote->irq_urb) {
- retval = -ENOMEM;
+ error = -ENOMEM;
goto fail2;
}
- retval = keyspan_setup(udev);
- if (retval) {
- retval = -ENODEV;
+ error = keyspan_setup(udev);
+ if (error) {
+ error = -ENODEV;
goto fail3;
}
@@ -495,14 +495,15 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
input_dev->name = remote->name;
input_dev->phys = remote->phys;
usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &interface->dev;
+ input_dev->dev.parent = &interface->dev;
input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */
for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
if (keyspan_key_table[i] != KEY_RESERVED)
set_bit(keyspan_key_table[i], input_dev->keybit);
- input_dev->private = remote;
+ input_set_drvdata(input_dev, remote);
+
input_dev->open = keyspan_open;
input_dev->close = keyspan_close;
@@ -517,7 +518,9 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* we can register the device now, as it is ready */
- input_register_device(remote->input);
+ error = input_register_device(remote->input);
+ if (error)
+ goto fail3;
/* save our data pointer in this interface device */
usb_set_intfdata(interface, remote);
@@ -529,7 +532,7 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
fail1: kfree(remote);
input_free_device(input_dev);
- return retval;
+ return error;
}
/*
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
deleted file mode 100644
index 92c4e07..0000000
--- a/drivers/usb/input/mtouchusb.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/******************************************************************************
- * mtouchusb.c -- Driver for Microtouch (Now 3M) USB Touchscreens
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Based upon original work by Radoslaw Garbacz (usb-support@ite.pl)
- * (http://freshmeat.net/projects/3mtouchscreendriver)
- *
- * History
- *
- * 0.3 & 0.4 2002 (TEJ) tejohnson@yahoo.com
- * Updated to 2.4.18, then 2.4.19
- * Old version still relied on stealing a minor
- *
- * 0.5 02/26/2004 (TEJ) tejohnson@yahoo.com
- * Complete rewrite using Linux Input in 2.6.3
- * Unfortunately no calibration support at this time
- *
- * 1.4 04/25/2004 (TEJ) tejohnson@yahoo.com
- * Changed reset from standard USB dev reset to vendor reset
- * Changed data sent to host from compensated to raw coordinates
- * Eliminated vendor/product module params
- * Performed multiple successful tests with an EXII-5010UC
- *
- * 1.5 02/27/2005 ddstreet@ieee.org
- * Added module parameter to select raw or hw-calibrated coordinate reporting
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-
-#define MTOUCHUSB_MIN_XC 0x0
-#define MTOUCHUSB_MAX_RAW_XC 0x4000
-#define MTOUCHUSB_MAX_CALIB_XC 0xffff
-#define MTOUCHUSB_XC_FUZZ 0x0
-#define MTOUCHUSB_XC_FLAT 0x0
-#define MTOUCHUSB_MIN_YC 0x0
-#define MTOUCHUSB_MAX_RAW_YC 0x4000
-#define MTOUCHUSB_MAX_CALIB_YC 0xffff
-#define MTOUCHUSB_YC_FUZZ 0x0
-#define MTOUCHUSB_YC_FLAT 0x0
-
-#define MTOUCHUSB_ASYNC_REPORT 1
-#define MTOUCHUSB_RESET 7
-#define MTOUCHUSB_REPORT_DATA_SIZE 11
-#define MTOUCHUSB_REQ_CTRLLR_ID 10
-
-#define MTOUCHUSB_GET_RAW_XC(data) (data[8]<<8 | data[7])
-#define MTOUCHUSB_GET_CALIB_XC(data) (data[4]<<8 | data[3])
-#define MTOUCHUSB_GET_RAW_YC(data) (data[10]<<8 | data[9])
-#define MTOUCHUSB_GET_CALIB_YC(data) (data[6]<<8 | data[5])
-#define MTOUCHUSB_GET_XC(data) (raw_coordinates ? \
- MTOUCHUSB_GET_RAW_XC(data) : \
- MTOUCHUSB_GET_CALIB_XC(data))
-#define MTOUCHUSB_GET_YC(data) (raw_coordinates ? \
- MTOUCHUSB_GET_RAW_YC(data) : \
- MTOUCHUSB_GET_CALIB_YC(data))
-#define MTOUCHUSB_GET_TOUCHED(data) ((data[2] & 0x40) ? 1:0)
-
-#define DRIVER_VERSION "v1.5"
-#define DRIVER_AUTHOR "Todd E. Johnson, tejohnson@yahoo.com"
-#define DRIVER_DESC "3M USB Touchscreen Driver"
-#define DRIVER_LICENSE "GPL"
-
-static int raw_coordinates = 1;
-
-module_param(raw_coordinates, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(raw_coordinates, "report raw coordinate values (y, default) or hardware-calibrated coordinate values (n)");
-
-struct mtouch_usb {
- unsigned char *data;
- dma_addr_t data_dma;
- struct urb *irq;
- struct usb_device *udev;
- struct input_dev *input;
- char name[128];
- char phys[64];
-};
-
-static struct usb_device_id mtouchusb_devices[] = {
- { USB_DEVICE(0x0596, 0x0001) },
- { }
-};
-
-static void mtouchusb_irq(struct urb *urb)
-{
- struct mtouch_usb *mtouch = urb->context;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ETIME:
- /* this urb is timing out */
- dbg("%s - urb timed out - was the device unplugged?",
- __FUNCTION__);
- return;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- goto exit;
- }
-
- input_report_key(mtouch->input, BTN_TOUCH,
- MTOUCHUSB_GET_TOUCHED(mtouch->data));
- input_report_abs(mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data));
- input_report_abs(mtouch->input, ABS_Y,
- (raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC)
- - MTOUCHUSB_GET_YC(mtouch->data));
- input_sync(mtouch->input);
-
-exit:
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
- err("%s - usb_submit_urb failed with result: %d",
- __FUNCTION__, retval);
-}
-
-static int mtouchusb_open(struct input_dev *input)
-{
- struct mtouch_usb *mtouch = input->private;
-
- mtouch->irq->dev = mtouch->udev;
-
- if (usb_submit_urb(mtouch->irq, GFP_ATOMIC))
- return -EIO;
-
- return 0;
-}
-
-static void mtouchusb_close(struct input_dev *input)
-{
- struct mtouch_usb *mtouch = input->private;
-
- usb_kill_urb(mtouch->irq);
-}
-
-static int mtouchusb_alloc_buffers(struct usb_device *udev, struct mtouch_usb *mtouch)
-{
- dbg("%s - called", __FUNCTION__);
-
- mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
- GFP_ATOMIC, &mtouch->data_dma);
-
- if (!mtouch->data)
- return -1;
-
- return 0;
-}
-
-static void mtouchusb_free_buffers(struct usb_device *udev, struct mtouch_usb *mtouch)
-{
- dbg("%s - called", __FUNCTION__);
-
- if (mtouch->data)
- usb_buffer_free(udev, MTOUCHUSB_REPORT_DATA_SIZE,
- mtouch->data, mtouch->data_dma);
-}
-
-static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct mtouch_usb *mtouch;
- struct input_dev *input_dev;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_device *udev = interface_to_usbdev(intf);
- int nRet;
-
- dbg("%s - called", __FUNCTION__);
-
- dbg("%s - setting interface", __FUNCTION__);
- interface = intf->cur_altsetting;
-
- dbg("%s - setting endpoint", __FUNCTION__);
- endpoint = &interface->endpoint[0].desc;
-
- mtouch = kzalloc(sizeof(struct mtouch_usb), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!mtouch || !input_dev) {
- err("%s - Out of memory.", __FUNCTION__);
- goto fail1;
- }
-
- dbg("%s - allocating buffers", __FUNCTION__);
- if (mtouchusb_alloc_buffers(udev, mtouch))
- goto fail2;
-
- mtouch->udev = udev;
- mtouch->input = input_dev;
-
- if (udev->manufacturer)
- strlcpy(mtouch->name, udev->manufacturer, sizeof(mtouch->name));
-
- if (udev->product) {
- if (udev->manufacturer)
- strlcat(mtouch->name, " ", sizeof(mtouch->name));
- strlcat(mtouch->name, udev->product, sizeof(mtouch->name));
- }
-
- if (!strlen(mtouch->name))
- snprintf(mtouch->name, sizeof(mtouch->name),
- "USB Touchscreen %04x:%04x",
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct));
-
- usb_make_path(udev, mtouch->phys, sizeof(mtouch->phys));
- strlcpy(mtouch->phys, "/input0", sizeof(mtouch->phys));
-
- input_dev->name = mtouch->name;
- input_dev->phys = mtouch->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = mtouch;
-
- input_dev->open = mtouchusb_open;
- input_dev->close = mtouchusb_close;
-
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(input_dev, ABS_X, MTOUCHUSB_MIN_XC,
- raw_coordinates ? MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC,
- MTOUCHUSB_XC_FUZZ, MTOUCHUSB_XC_FLAT);
- input_set_abs_params(input_dev, ABS_Y, MTOUCHUSB_MIN_YC,
- raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC,
- MTOUCHUSB_YC_FUZZ, MTOUCHUSB_YC_FLAT);
-
- nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
- MTOUCHUSB_RESET,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
- dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
- __FUNCTION__, nRet);
-
- dbg("%s - usb_alloc_urb: mtouch->irq", __FUNCTION__);
- mtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!mtouch->irq) {
- dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__);
- goto fail2;
- }
-
- dbg("%s - usb_fill_int_urb", __FUNCTION__);
- usb_fill_int_urb(mtouch->irq, mtouch->udev,
- usb_rcvintpipe(mtouch->udev, 0x81),
- mtouch->data, MTOUCHUSB_REPORT_DATA_SIZE,
- mtouchusb_irq, mtouch, endpoint->bInterval);
-
- dbg("%s - input_register_device", __FUNCTION__);
- input_register_device(mtouch->input);
-
- nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
- MTOUCHUSB_ASYNC_REPORT,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
- dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
- __FUNCTION__, nRet);
-
- usb_set_intfdata(intf, mtouch);
- return 0;
-
-fail2: mtouchusb_free_buffers(udev, mtouch);
-fail1: input_free_device(input_dev);
- kfree(mtouch);
- return -ENOMEM;
-}
-
-static void mtouchusb_disconnect(struct usb_interface *intf)
-{
- struct mtouch_usb *mtouch = usb_get_intfdata(intf);
-
- dbg("%s - called", __FUNCTION__);
- usb_set_intfdata(intf, NULL);
- if (mtouch) {
- dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__);
- usb_kill_urb(mtouch->irq);
- input_unregister_device(mtouch->input);
- usb_free_urb(mtouch->irq);
- mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch);
- kfree(mtouch);
- }
-}
-
-MODULE_DEVICE_TABLE(usb, mtouchusb_devices);
-
-static struct usb_driver mtouchusb_driver = {
- .name = "mtouchusb",
- .probe = mtouchusb_probe,
- .disconnect = mtouchusb_disconnect,
- .id_table = mtouchusb_devices,
-};
-
-static int __init mtouchusb_init(void)
-{
- dbg("%s - called", __FUNCTION__);
- return usb_register(&mtouchusb_driver);
-}
-
-static void __exit mtouchusb_cleanup(void)
-{
- dbg("%s - called", __FUNCTION__);
- usb_deregister(&mtouchusb_driver);
-}
-
-module_init(mtouchusb_init);
-module_exit(mtouchusb_cleanup);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index fea97e5..4f93a76 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -252,7 +252,7 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne
static int powermate_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int _value)
{
unsigned int command = (unsigned int)_value;
- struct powermate_device *pm = dev->private;
+ struct powermate_device *pm = input_get_drvdata(dev);
if (type == EV_MSC && code == MSC_PULSELED){
/*
@@ -308,7 +308,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
struct powermate_device *pm;
struct input_dev *input_dev;
int pipe, maxp;
- int err = -ENOMEM;
+ int error = -ENOMEM;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
@@ -359,8 +359,9 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
input_dev->phys = pm->phys;
usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = pm;
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, pm);
input_dev->event = powermate_input_event;
@@ -387,11 +388,14 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
/* register our interrupt URB with the USB system */
if (usb_submit_urb(pm->irq, GFP_KERNEL)) {
- err = -EIO;
+ error = -EIO;
goto fail4;
}
- input_register_device(pm->input);
+ error = input_register_device(pm->input);
+ if (error)
+ goto fail5;
+
/* force an update of everything */
pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS;
@@ -400,12 +404,13 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
usb_set_intfdata(intf, pm);
return 0;
-fail4: usb_free_urb(pm->config);
-fail3: usb_free_urb(pm->irq);
-fail2: powermate_free_buffers(udev, pm);
-fail1: input_free_device(input_dev);
+ fail5: usb_kill_urb(pm->irq);
+ fail4: usb_free_urb(pm->config);
+ fail3: usb_free_urb(pm->irq);
+ fail2: powermate_free_buffers(udev, pm);
+ fail1: input_free_device(input_dev);
kfree(pm);
- return err;
+ return error;
}
/* Called when a USB device we've accepted ownership of is removed */
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
deleted file mode 100644
index 2a314b0..0000000
--- a/drivers/usb/input/touchkitusb.c
+++ /dev/null
@@ -1,392 +0,0 @@
-/******************************************************************************
- * touchkitusb.c -- Driver for eGalax TouchKit USB Touchscreens
- *
- * Copyright (C) 2004-2005 by Daniel Ritz <daniel.ritz@gmx.ch>
- * Copyright (C) by Todd E. Johnson (mtouchusb.c)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Based upon mtouchusb.c
- *
- *****************************************************************************/
-
-//#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-
-#define TOUCHKIT_MIN_XC 0x0
-#define TOUCHKIT_MAX_XC 0x07ff
-#define TOUCHKIT_XC_FUZZ 0x0
-#define TOUCHKIT_XC_FLAT 0x0
-#define TOUCHKIT_MIN_YC 0x0
-#define TOUCHKIT_MAX_YC 0x07ff
-#define TOUCHKIT_YC_FUZZ 0x0
-#define TOUCHKIT_YC_FLAT 0x0
-#define TOUCHKIT_REPORT_DATA_SIZE 16
-
-#define TOUCHKIT_DOWN 0x01
-
-#define TOUCHKIT_PKT_TYPE_MASK 0xFE
-#define TOUCHKIT_PKT_TYPE_REPT 0x80
-#define TOUCHKIT_PKT_TYPE_DIAG 0x0A
-
-#define DRIVER_VERSION "v0.1"
-#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
-#define DRIVER_DESC "eGalax TouchKit USB HID Touchscreen Driver"
-
-static int swap_xy;
-module_param(swap_xy, bool, 0644);
-MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
-
-struct touchkit_usb {
- unsigned char *data;
- dma_addr_t data_dma;
- char buffer[TOUCHKIT_REPORT_DATA_SIZE];
- int buf_len;
- struct urb *irq;
- struct usb_device *udev;
- struct input_dev *input;
- char name[128];
- char phys[64];
-};
-
-static struct usb_device_id touchkit_devices[] = {
- {USB_DEVICE(0x3823, 0x0001)},
- {USB_DEVICE(0x0123, 0x0001)},
- {USB_DEVICE(0x0eef, 0x0001)},
- {USB_DEVICE(0x0eef, 0x0002)},
- {}
-};
-
-/* helpers to read the data */
-static inline int touchkit_get_touched(char *data)
-{
- return (data[0] & TOUCHKIT_DOWN) ? 1 : 0;
-}
-
-static inline int touchkit_get_x(char *data)
-{
- return ((data[3] & 0x0F) << 7) | (data[4] & 0x7F);
-}
-
-static inline int touchkit_get_y(char *data)
-{
- return ((data[1] & 0x0F) << 7) | (data[2] & 0x7F);
-}
-
-
-/* processes one input packet. */
-static void touchkit_process_pkt(struct touchkit_usb *touchkit, char *pkt)
-{
- int x, y;
-
- /* only process report packets */
- if ((pkt[0] & TOUCHKIT_PKT_TYPE_MASK) != TOUCHKIT_PKT_TYPE_REPT)
- return;
-
- if (swap_xy) {
- y = touchkit_get_x(pkt);
- x = touchkit_get_y(pkt);
- } else {
- x = touchkit_get_x(pkt);
- y = touchkit_get_y(pkt);
- }
-
- input_report_key(touchkit->input, BTN_TOUCH, touchkit_get_touched(pkt));
- input_report_abs(touchkit->input, ABS_X, x);
- input_report_abs(touchkit->input, ABS_Y, y);
- input_sync(touchkit->input);
-}
-
-
-static int touchkit_get_pkt_len(char *buf)
-{
- switch (buf[0] & TOUCHKIT_PKT_TYPE_MASK) {
- case TOUCHKIT_PKT_TYPE_REPT:
- return 5;
-
- case TOUCHKIT_PKT_TYPE_DIAG:
- return buf[1] + 2;
- }
-
- return 0;
-}
-
-static void touchkit_process(struct touchkit_usb *touchkit, int len)
-{
- char *buffer;
- int pkt_len, buf_len, pos;
-
- /* if the buffer contains data, append */
- if (unlikely(touchkit->buf_len)) {
- int tmp;
-
- /* if only 1 byte in buffer, add another one to get length */
- if (touchkit->buf_len == 1)
- touchkit->buffer[1] = touchkit->data[0];
-
- pkt_len = touchkit_get_pkt_len(touchkit->buffer);
-
- /* unknown packet: drop everything */
- if (!pkt_len)
- return;
-
- /* append, process */
- tmp = pkt_len - touchkit->buf_len;
- memcpy(touchkit->buffer + touchkit->buf_len, touchkit->data, tmp);
- touchkit_process_pkt(touchkit, touchkit->buffer);
-
- buffer = touchkit->data + tmp;
- buf_len = len - tmp;
- } else {
- buffer = touchkit->data;
- buf_len = len;
- }
-
- /* only one byte left in buffer */
- if (unlikely(buf_len == 1)) {
- touchkit->buffer[0] = buffer[0];
- touchkit->buf_len = 1;
- return;
- }
-
- /* loop over the buffer */
- pos = 0;
- while (pos < buf_len) {
- /* get packet len */
- pkt_len = touchkit_get_pkt_len(buffer + pos);
-
- /* unknown packet: drop everything */
- if (unlikely(!pkt_len))
- return;
-
- /* full packet: process */
- if (likely(pkt_len <= buf_len)) {
- touchkit_process_pkt(touchkit, buffer + pos);
- } else {
- /* incomplete packet: save in buffer */
- memcpy(touchkit->buffer, buffer + pos, buf_len - pos);
- touchkit->buf_len = buf_len - pos;
- }
- pos += pkt_len;
- }
-}
-
-
-static void touchkit_irq(struct urb *urb)
-{
- struct touchkit_usb *touchkit = urb->context;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ETIME:
- /* this urb is timing out */
- dbg("%s - urb timed out - was the device unplugged?",
- __FUNCTION__);
- return;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- goto exit;
- }
-
- touchkit_process(touchkit, urb->actual_length);
-
-exit:
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
- err("%s - usb_submit_urb failed with result: %d",
- __FUNCTION__, retval);
-}
-
-static int touchkit_open(struct input_dev *input)
-{
- struct touchkit_usb *touchkit = input->private;
-
- touchkit->irq->dev = touchkit->udev;
-
- if (usb_submit_urb(touchkit->irq, GFP_ATOMIC))
- return -EIO;
-
- return 0;
-}
-
-static void touchkit_close(struct input_dev *input)
-{
- struct touchkit_usb *touchkit = input->private;
-
- usb_kill_urb(touchkit->irq);
-}
-
-static int touchkit_alloc_buffers(struct usb_device *udev,
- struct touchkit_usb *touchkit)
-{
- touchkit->data = usb_buffer_alloc(udev, TOUCHKIT_REPORT_DATA_SIZE,
- GFP_ATOMIC, &touchkit->data_dma);
-
- if (!touchkit->data)
- return -1;
-
- return 0;
-}
-
-static void touchkit_free_buffers(struct usb_device *udev,
- struct touchkit_usb *touchkit)
-{
- if (touchkit->data)
- usb_buffer_free(udev, TOUCHKIT_REPORT_DATA_SIZE,
- touchkit->data, touchkit->data_dma);
-}
-
-static int touchkit_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct touchkit_usb *touchkit;
- struct input_dev *input_dev;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_device *udev = interface_to_usbdev(intf);
-
- interface = intf->cur_altsetting;
- endpoint = &interface->endpoint[0].desc;
-
- touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!touchkit || !input_dev)
- goto out_free;
-
- if (touchkit_alloc_buffers(udev, touchkit))
- goto out_free;
-
- touchkit->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!touchkit->irq) {
- dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__);
- goto out_free_buffers;
- }
-
- touchkit->udev = udev;
- touchkit->input = input_dev;
-
- if (udev->manufacturer)
- strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name));
-
- if (udev->product) {
- if (udev->manufacturer)
- strlcat(touchkit->name, " ", sizeof(touchkit->name));
- strlcat(touchkit->name, udev->product, sizeof(touchkit->name));
- }
-
- if (!strlen(touchkit->name))
- snprintf(touchkit->name, sizeof(touchkit->name),
- "USB Touchscreen %04x:%04x",
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct));
-
- usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys));
- strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys));
-
- input_dev->name = touchkit->name;
- input_dev->phys = touchkit->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = touchkit;
- input_dev->open = touchkit_open;
- input_dev->close = touchkit_close;
-
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC,
- TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT);
- input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC,
- TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT);
-
- usb_fill_int_urb(touchkit->irq, touchkit->udev,
- usb_rcvintpipe(touchkit->udev, 0x81),
- touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
- touchkit_irq, touchkit, endpoint->bInterval);
-
- touchkit->irq->transfer_dma = touchkit->data_dma;
- touchkit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- input_register_device(touchkit->input);
-
- usb_set_intfdata(intf, touchkit);
- return 0;
-
-out_free_buffers:
- touchkit_free_buffers(udev, touchkit);
-out_free:
- input_free_device(input_dev);
- kfree(touchkit);
- return -ENOMEM;
-}
-
-static void touchkit_disconnect(struct usb_interface *intf)
-{
- struct touchkit_usb *touchkit = usb_get_intfdata(intf);
-
- dbg("%s - called", __FUNCTION__);
-
- if (!touchkit)
- return;
-
- dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__);
- usb_set_intfdata(intf, NULL);
- usb_kill_urb(touchkit->irq);
- input_unregister_device(touchkit->input);
- usb_free_urb(touchkit->irq);
- touchkit_free_buffers(interface_to_usbdev(intf), touchkit);
- kfree(touchkit);
-}
-
-MODULE_DEVICE_TABLE(usb, touchkit_devices);
-
-static struct usb_driver touchkit_driver = {
- .name = "touchkitusb",
- .probe = touchkit_probe,
- .disconnect = touchkit_disconnect,
- .id_table = touchkit_devices,
-};
-
-static int __init touchkit_init(void)
-{
- return usb_register(&touchkit_driver);
-}
-
-static void __exit touchkit_cleanup(void)
-{
- usb_deregister(&touchkit_driver);
-}
-
-module_init(touchkit_init);
-module_exit(touchkit_cleanup);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 86e37a2..e082941 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -647,7 +647,7 @@ exit:
static int usbtouch_open(struct input_dev *input)
{
- struct usbtouch_usb *usbtouch = input->private;
+ struct usbtouch_usb *usbtouch = input_get_drvdata(input);
usbtouch->irq->dev = usbtouch->udev;
@@ -659,7 +659,7 @@ static int usbtouch_open(struct input_dev *input)
static void usbtouch_close(struct input_dev *input)
{
- struct usbtouch_usb *usbtouch = input->private;
+ struct usbtouch_usb *usbtouch = input_get_drvdata(input);
usb_kill_urb(usbtouch->irq);
}
@@ -740,8 +740,10 @@ static int usbtouch_probe(struct usb_interface *intf,
input_dev->name = usbtouch->name;
input_dev->phys = usbtouch->phys;
usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = usbtouch;
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, usbtouch);
+
input_dev->open = usbtouch_open;
input_dev->close = usbtouch_close;
diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c
index 12b4274..1fe4820 100644
--- a/drivers/usb/input/wacom_sys.c
+++ b/drivers/usb/input/wacom_sys.c
@@ -122,7 +122,7 @@ void wacom_input_sync(void *wcombo)
static int wacom_open(struct input_dev *dev)
{
- struct wacom *wacom = dev->private;
+ struct wacom *wacom = input_get_drvdata(dev);
wacom->irq->dev = wacom->usbdev;
if (usb_submit_urb(wacom->irq, GFP_KERNEL))
@@ -133,7 +133,7 @@ static int wacom_open(struct input_dev *dev)
static void wacom_close(struct input_dev *dev)
{
- struct wacom *wacom = dev->private;
+ struct wacom *wacom = input_get_drvdata(dev);
usb_kill_urb(wacom->irq);
}
@@ -201,6 +201,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
struct wacom *wacom;
struct wacom_wac *wacom_wac;
struct input_dev *input_dev;
+ int error = -ENOMEM;
char rep_data[2], limit = 0;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
@@ -229,8 +230,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
wacom->wacom_wac = wacom_wac;
usb_to_input_id(dev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = wacom;
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, wacom);
+
input_dev->open = wacom_open;
input_dev->close = wacom_close;
@@ -252,7 +255,9 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
wacom->irq->transfer_dma = wacom->data_dma;
wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(wacom->dev);
+ error = input_register_device(wacom->dev);
+ if (error)
+ goto fail3;
/* Ask the tablet to report tablet data. Repeat until it succeeds */
do {
@@ -265,11 +270,12 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
usb_set_intfdata(intf, wacom);
return 0;
-fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
-fail1: input_free_device(input_dev);
+ fail3: usb_free_urb(wacom->irq);
+ fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
+ fail1: input_free_device(input_dev);
kfree(wacom);
kfree(wacom_wac);
- return -ENOMEM;
+ return error;
}
static void wacom_disconnect(struct usb_interface *intf)
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index e4bc76e..7357239 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -267,7 +267,7 @@ exit:
static int xpad_open (struct input_dev *dev)
{
- struct usb_xpad *xpad = dev->private;
+ struct usb_xpad *xpad = input_get_drvdata(dev);
xpad->irq_in->dev = xpad->udev;
if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
@@ -278,7 +278,7 @@ static int xpad_open (struct input_dev *dev)
static void xpad_close (struct input_dev *dev)
{
- struct usb_xpad *xpad = dev->private;
+ struct usb_xpad *xpad = input_get_drvdata(dev);
usb_kill_urb(xpad->irq_in);
}
@@ -312,6 +312,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
int i;
+ int error = -ENOMEM;
for (i = 0; xpad_device[i].idVendor; i++) {
if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
@@ -344,8 +345,10 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
input_dev->name = xpad_device[i].name;
input_dev->phys = xpad->phys;
usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = xpad;
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, xpad);
+
input_dev->open = xpad_open;
input_dev->close = xpad_close;
@@ -373,15 +376,18 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(xpad->dev);
+ error = input_register_device(xpad->dev);
+ if (error)
+ goto fail3;
usb_set_intfdata(intf, xpad);
return 0;
-fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
-fail1: input_free_device(input_dev);
+ fail3: usb_free_urb(xpad->irq_in);
+ fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+ fail1: input_free_device(input_dev);
kfree(xpad);
- return -ENOMEM;
+ return error;
}
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index caff8e6..c54f1a5 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -502,7 +502,7 @@ static int input_ev(struct input_dev *dev, unsigned int type,
static int input_open(struct input_dev *dev)
{
- struct yealink_dev *yld = dev->private;
+ struct yealink_dev *yld = input_get_drvdata(dev);
int i, ret;
dbg("%s", __FUNCTION__);
@@ -529,7 +529,7 @@ static int input_open(struct input_dev *dev)
static void input_close(struct input_dev *dev)
{
- struct yealink_dev *yld = dev->private;
+ struct yealink_dev *yld = input_get_drvdata(dev);
usb_kill_urb(yld->urb_ctl);
usb_kill_urb(yld->urb_irq);
@@ -937,9 +937,10 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
input_dev->name = nfo->name;
input_dev->phys = yld->phys;
usb_to_input_id(udev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, yld);
- input_dev->private = yld;
input_dev->open = input_open;
input_dev->close = input_close;
/* input_dev->event = input_ev; TODO */
@@ -955,7 +956,9 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
}
}
- input_register_device(yld->idev);
+ ret = input_register_device(yld->idev);
+ if (ret)
+ return usb_cleanup(yld, ret);
usb_set_intfdata(intf, yld);
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index a0cc05d..60d2944 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -55,7 +55,6 @@
#include <linux/usb.h>
#include <linux/types.h>
#include <linux/ethtool.h>
-#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/wait.h>
#include <asm/uaccess.h>
generated by cgit v0.10.2 at 2024-11-15 14:08:26 (GMT)