summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-wdm.c7
-rw-r--r--drivers/usb/core/hcd-pci.c9
-rw-r--r--drivers/usb/core/hub.c3
-rw-r--r--drivers/usb/core/message.c6
-rw-r--r--drivers/usb/dwc3/core.c6
-rw-r--r--drivers/usb/dwc3/ep0.c12
-rw-r--r--drivers/usb/gadget/at91_udc.c8
-rw-r--r--drivers/usb/gadget/dummy_hcd.c1
-rw-r--r--drivers/usb/gadget/f_fs.c3
-rw-r--r--drivers/usb/gadget/f_mass_storage.c2
-rw-r--r--drivers/usb/gadget/f_rndis.c1
-rw-r--r--drivers/usb/gadget/file_storage.c2
-rw-r--r--drivers/usb/gadget/fsl_udc_core.c25
-rw-r--r--drivers/usb/gadget/g_ffs.c4
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c17
-rw-r--r--drivers/usb/gadget/udc-core.c6
-rw-r--r--drivers/usb/gadget/uvc.h2
-rw-r--r--drivers/usb/gadget/uvc_queue.c4
-rw-r--r--drivers/usb/gadget/uvc_v4l2.c2
-rw-r--r--drivers/usb/host/ehci-fsl.c7
-rw-r--r--drivers/usb/host/ehci-hcd.c9
-rw-r--r--drivers/usb/host/ehci-omap.c39
-rw-r--r--drivers/usb/host/ehci-pci.c8
-rw-r--r--drivers/usb/host/ehci-tegra.c377
-rw-r--r--drivers/usb/host/ohci-at91.c12
-rw-r--r--drivers/usb/misc/usbtest.c9
-rw-r--r--drivers/usb/misc/yurex.c10
-rw-r--r--drivers/usb/musb/davinci.c3
-rw-r--r--drivers/usb/musb/musb_core.c40
-rw-r--r--drivers/usb/musb/musb_core.h2
-rw-r--r--drivers/usb/musb/musb_host.c2
-rw-r--r--drivers/usb/musb/omap2430.c31
-rw-r--r--drivers/usb/otg/gpio_vbus.c15
-rw-r--r--drivers/usb/serial/cp210x.c9
-rw-r--r--drivers/usb/serial/sierra.c6
35 files changed, 422 insertions, 277 deletions
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index c6f6560..0bb2b32 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb)
spin_lock(&desc->iuspin);
desc->werr = urb->status;
spin_unlock(&desc->iuspin);
- clear_bit(WDM_IN_USE, &desc->flags);
kfree(desc->outbuf);
+ desc->outbuf = NULL;
+ clear_bit(WDM_IN_USE, &desc->flags);
wake_up(&desc->wait);
}
@@ -338,7 +339,7 @@ static ssize_t wdm_write
if (we < 0)
return -EIO;
- desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+ buf = kmalloc(count, GFP_KERNEL);
if (!buf) {
rv = -ENOMEM;
goto outnl;
@@ -406,10 +407,12 @@ static ssize_t wdm_write
req->wIndex = desc->inum;
req->wLength = cpu_to_le16(count);
set_bit(WDM_IN_USE, &desc->flags);
+ desc->outbuf = buf;
rv = usb_submit_urb(desc->command, GFP_KERNEL);
if (rv < 0) {
kfree(buf);
+ desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
} else {
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a4..57ed9e4 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
pci_save_state(pci_dev);
+ /*
+ * Some systems crash if an EHCI controller is in D3 during
+ * a sleep transition. We have to leave such controllers in D0.
+ */
+ if (hcd->broken_pci_sleep) {
+ dev_dbg(dev, "Staying in PCI D0\n");
+ return retval;
+ }
+
/* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a2aa9d6..ec6c97d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1667,7 +1667,6 @@ void usb_disconnect(struct usb_device **pdev)
{
struct usb_device *udev = *pdev;
int i;
- struct usb_hcd *hcd = bus_to_hcd(udev->bus);
/* mark the device as inactive, so any further urb submissions for
* this device (and any of its children) will fail immediately.
@@ -1690,9 +1689,7 @@ void usb_disconnect(struct usb_device **pdev)
* so that the hardware is now fully quiesced.
*/
dev_dbg (&udev->dev, "unregistering device\n");
- mutex_lock(hcd->bandwidth_mutex);
usb_disable_device(udev, 0);
- mutex_unlock(hcd->bandwidth_mutex);
usb_hcd_synchronize_unlinks(udev);
usb_remove_ep_devs(&udev->ep0);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index aed3e07..ca717da 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1136,8 +1136,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
* Deallocates hcd/hardware state for the endpoints (nuking all or most
* pending urbs) and usbcore state for the interfaces, so that usbcore
* must usb_set_configuration() before any interfaces could be used.
- *
- * Must be called with hcd->bandwidth_mutex held.
*/
void usb_disable_device(struct usb_device *dev, int skip_ep0)
{
@@ -1190,7 +1188,9 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
usb_disable_endpoint(dev, i + USB_DIR_IN, false);
}
/* Remove endpoints from the host controller internal state */
+ mutex_lock(hcd->bandwidth_mutex);
usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ mutex_unlock(hcd->bandwidth_mutex);
/* Second pass: remove endpoint pointers */
}
for (i = skip_ep0; i < 16; ++i) {
@@ -1750,7 +1750,6 @@ free_interfaces:
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
- mutex_lock(hcd->bandwidth_mutex);
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device(dev, 1); /* Skip ep0 */
@@ -1763,6 +1762,7 @@ free_interfaces:
* host controller will not allow submissions to dropped endpoints. If
* this call fails, the device state is unchanged.
*/
+ mutex_lock(hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 7bd815a..99b58d84 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -206,11 +206,11 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
for (i = 0; i < dwc->num_event_buffers; i++) {
evt = dwc->ev_buffs[i];
- if (evt) {
+ if (evt)
dwc3_free_one_event_buffer(dwc, evt);
- dwc->ev_buffs[i] = NULL;
- }
}
+
+ kfree(dwc->ev_buffs);
}
/**
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 25910e2..3584a16 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -353,6 +353,9 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
dwc->test_mode_nr = wIndex >> 8;
dwc->test_mode = true;
+ break;
+ default:
+ return -EINVAL;
}
break;
@@ -559,15 +562,20 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
length = trb->size & DWC3_TRB_SIZE_MASK;
if (dwc->ep0_bounced) {
+ unsigned transfer_size = ur->length;
+ unsigned maxp = ep0->endpoint.maxpacket;
+
+ transfer_size += (maxp - (transfer_size % maxp));
transferred = min_t(u32, ur->length,
- ep0->endpoint.maxpacket - length);
+ transfer_size - length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
dwc->ep0_bounced = false;
} else {
transferred = ur->length - length;
- ur->actual += transferred;
}
+ ur->actual += transferred;
+
if ((epnum & 1) && ur->actual < ur->length) {
/* for some reason we did not get everything out */
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0c935d7..9d7bcd9 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1863,8 +1863,8 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
mod_timer(&udc->vbus_timer,
jiffies + VBUS_POLL_TIMEOUT);
} else {
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
- 0, driver_name, udc)) {
+ if (request_irq(gpio_to_irq(udc->board.vbus_pin),
+ at91_vbus_irq, 0, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
retval = -EBUSY;
@@ -1886,7 +1886,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
return 0;
fail4:
if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
fail3:
if (gpio_is_valid(udc->board.vbus_pin))
gpio_free(udc->board.vbus_pin);
@@ -1924,7 +1924,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
if (gpio_is_valid(udc->board.vbus_pin)) {
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
gpio_free(udc->board.vbus_pin);
}
free_irq(udc->udp_irq, udc);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a6dfd21..170cbe8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
dum->driver = NULL;
- dummy_pullup(&dum->gadget, 0);
return 0;
}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 1cbba70..f52cb1a 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -712,7 +712,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
if (code == FUNCTIONFS_INTERFACE_REVMAP) {
struct ffs_function *func = ffs->func;
ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
- } else if (gadget->ops->ioctl) {
+ } else if (gadget && gadget->ops->ioctl) {
ret = gadget->ops->ioctl(gadget, code, value);
} else {
ret = -ENOTTY;
@@ -1382,6 +1382,7 @@ static void functionfs_unbind(struct ffs_data *ffs)
ffs->ep0req = NULL;
ffs->gadget = NULL;
ffs_data_put(ffs);
+ clear_bit(FFS_FL_BOUND, &ffs->flags);
}
}
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a371e96..cb8c162 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2189,7 +2189,7 @@ unknown_cmnd:
common->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
reply = check_command(common, common->cmnd_size,
- DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+ DATA_DIR_UNKNOWN, ~0, 0, unknown);
if (reply == 0) {
common->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 7b1cf18..5234365 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -500,6 +500,7 @@ rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
if (buf) {
memcpy(req->buf, buf, n);
req->complete = rndis_response_complete;
+ req->context = rndis;
rndis_free_response(rndis->config, buf);
value = n;
}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 4fac569..a896d73 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
fsg->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
if ((reply = check_command(fsg, fsg->cmnd_size,
- DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
fsg->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 5f94e79..55abfb6 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -730,7 +730,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
: (1 << (ep_index(ep)));
/* check if the pipe is empty */
- if (!(list_empty(&ep->queue))) {
+ if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) {
/* Add td to the end */
struct fsl_req *lastreq;
lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
@@ -918,10 +918,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
return -ENOMEM;
}
- /* Update ep0 state */
- if ((ep_index(ep) == 0))
- udc->ep0_state = DATA_STATE_XMIT;
-
/* irq handler advances the queue */
if (req != NULL)
list_add_tail(&req->queue, &ep->queue);
@@ -1279,7 +1275,8 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
udc->ep0_dir = USB_DIR_OUT;
ep = &udc->eps[0];
- udc->ep0_state = WAIT_FOR_OUT_STATUS;
+ if (udc->ep0_state != DATA_STATE_XMIT)
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
req->ep = ep;
req->req.length = 0;
@@ -1384,6 +1381,9 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
list_add_tail(&req->queue, &ep->queue);
udc->ep0_state = DATA_STATE_XMIT;
+ if (ep0_prime_status(udc, EP_DIR_OUT))
+ ep0stall(udc);
+
return;
stall:
ep0stall(udc);
@@ -1492,6 +1492,14 @@ static void setup_received_irq(struct fsl_udc *udc,
spin_lock(&udc->lock);
udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
? DATA_STATE_XMIT : DATA_STATE_RECV;
+ /*
+ * If the data stage is IN, send status prime immediately.
+ * See 2.0 Spec chapter 8.5.3.3 for detail.
+ */
+ if (udc->ep0_state == DATA_STATE_XMIT)
+ if (ep0_prime_status(udc, EP_DIR_OUT))
+ ep0stall(udc);
+
} else {
/* No data phase, IN status from gadget */
udc->ep0_dir = USB_DIR_IN;
@@ -1520,9 +1528,8 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
switch (udc->ep0_state) {
case DATA_STATE_XMIT:
- /* receive status phase */
- if (ep0_prime_status(udc, EP_DIR_OUT))
- ep0stall(udc);
+ /* already primed at setup_received_irq */
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
break;
case DATA_STATE_RECV:
/* send status phase */
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 331cd67..a85eaf4 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -161,7 +161,7 @@ static struct usb_composite_driver gfs_driver = {
static struct ffs_data *gfs_ffs_data;
static unsigned long gfs_registered;
-static int gfs_init(void)
+static int __init gfs_init(void)
{
ENTER();
@@ -169,7 +169,7 @@ static int gfs_init(void)
}
module_init(gfs_init);
-static void gfs_exit(void)
+static void __exit gfs_exit(void)
{
ENTER();
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 69295ba..105b206 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -340,7 +340,7 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
/* currently we allocate TX FIFOs for all possible endpoints,
* and assume that they are all the same size. */
- for (ep = 0; ep <= 15; ep++) {
+ for (ep = 1; ep <= 15; ep++) {
val = addr;
val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
addr += size;
@@ -741,7 +741,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
/* write size / packets */
writel(epsize, hsotg->regs + epsize_reg);
- if (using_dma(hsotg)) {
+ if (using_dma(hsotg) && !continuing) {
unsigned int dma_reg;
/* write DMA address to control register, buffer already
@@ -1696,10 +1696,12 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
reg |= mpsval;
writel(reg, regs + S3C_DIEPCTL(ep));
- reg = readl(regs + S3C_DOEPCTL(ep));
- reg &= ~S3C_DxEPCTL_MPS_MASK;
- reg |= mpsval;
- writel(reg, regs + S3C_DOEPCTL(ep));
+ if (ep) {
+ reg = readl(regs + S3C_DOEPCTL(ep));
+ reg &= ~S3C_DxEPCTL_MPS_MASK;
+ reg |= mpsval;
+ writel(reg, regs + S3C_DOEPCTL(ep));
+ }
return;
@@ -1919,7 +1921,8 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
ints & S3C_DIEPMSK_TxFIFOEmpty) {
dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
__func__, idx);
- s3c_hsotg_trytx(hsotg, hs_ep);
+ if (!using_dma(hsotg))
+ s3c_hsotg_trytx(hsotg, hs_ep);
}
}
}
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 56da49f..e5e44f8 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -263,9 +263,9 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
if (udc_is_newstyle(udc)) {
udc->driver->disconnect(udc->gadget);
+ usb_gadget_disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
usb_gadget_udc_stop(udc->gadget, udc->driver);
- usb_gadget_disconnect(udc->gadget);
} else {
usb_gadget_stop(udc->gadget, udc->driver);
}
@@ -411,9 +411,13 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
if (sysfs_streq(buf, "connect")) {
+ if (udc_is_newstyle(udc))
+ usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
} else if (sysfs_streq(buf, "disconnect")) {
usb_gadget_disconnect(udc->gadget);
+ if (udc_is_newstyle(udc))
+ usb_gadget_udc_stop(udc->gadget, udc->driver);
} else {
dev_err(dev, "unsupported command '%s'\n", buf);
return -EINVAL;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index bc78c60..ca4e03a 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -28,7 +28,7 @@
struct uvc_request_data
{
- unsigned int length;
+ __s32 length;
__u8 data[60];
};
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index d776adb..0cdf89d 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -543,11 +543,11 @@ done:
return ret;
}
+/* called with queue->irqlock held.. */
static struct uvc_buffer *
uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
{
struct uvc_buffer *nextbuf;
- unsigned long flags;
if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
buf->buf.length != buf->buf.bytesused) {
@@ -556,14 +556,12 @@ uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
return buf;
}
- spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
queue);
else
nextbuf = NULL;
- spin_unlock_irqrestore(&queue->irqlock, flags);
buf->buf.sequence = queue->sequence++;
do_gettimeofday(&buf->buf.timestamp);
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index f6e083b..54d7ca5 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
if (data->length < 0)
return usb_ep_set_halt(cdev->gadget->ep0);
- req->length = min(uvc->event_length, data->length);
+ req->length = min_t(unsigned int, uvc->event_length, data->length);
req->zero = data->length < uvc->event_length;
req->dma = DMA_ADDR_INVALID;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 3e73451..d0a84bd 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -218,6 +218,9 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
u32 portsc;
struct usb_hcd *hcd = ehci_to_hcd(ehci);
void __iomem *non_ehci = hcd->regs;
+ struct fsl_usb2_platform_data *pdata;
+
+ pdata = hcd->self.controller->platform_data;
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
@@ -234,7 +237,9 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
/* fall through */
case FSL_USB2_PHY_UTMI:
/* enable UTMI PHY */
- setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
+ if (pdata->have_sysif_regs)
+ setbits32(non_ehci + FSL_SOC_USB_CTRL,
+ CTRL_UTMI_PHY_EN);
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 806cc95..4a3bc5b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -858,8 +858,13 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
goto dead;
}
+ /*
+ * We don't use STS_FLR, but some controllers don't like it to
+ * remain on, so mask it out along with the other status bits.
+ */
+ masked_status = status & (INTR_MASK | STS_FLR);
+
/* Shared IRQ? */
- masked_status = status & INTR_MASK;
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
spin_unlock(&ehci->lock);
return IRQ_NONE;
@@ -910,7 +915,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
pcd_status = status;
/* resume root hub? */
- if (!(cmd & CMD_RUN))
+ if (ehci->rh_state == EHCI_RH_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
/* get per-port change detect bits */
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index bba9850..5c78f9e 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -42,6 +42,7 @@
#include <plat/usb.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/gpio.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -191,6 +192,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_request_one(pdata->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_request_one(pdata->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -237,6 +251,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
+ if (pdata->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_set_value(pdata->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_set_value(pdata->reset_gpio_port[1], 1);
+ }
+
return 0;
err_add_hcd:
@@ -259,8 +286,9 @@ err_io:
*/
static int ehci_hcd_omap_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_hcd_omap_platform_data *pdata = dev->platform_data;
usb_remove_hcd(hcd);
disable_put_regulator(dev->platform_data);
@@ -269,6 +297,13 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_free(pdata->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_free(pdata->reset_gpio_port[1]);
+ }
return 0;
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb7241d..fe8dc06 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
hcd->has_tt = 1;
tdi_reset(ehci);
}
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+ /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+ if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+ ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+ hcd->broken_pci_sleep = 1;
+ device_set_wakeup_capable(&pdev->dev, false);
+ }
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 73544bd..f214a80 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
#include <mach/usb_phy.h>
#include <mach/iomap.h>
@@ -37,9 +38,7 @@ struct tegra_ehci_hcd {
struct clk *emc_clk;
struct usb_phy *transceiver;
int host_resumed;
- int bus_suspended;
int port_resuming;
- int power_down_on_bus_suspend;
enum tegra_usb_phy_port_speed port_speed;
};
@@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd)
up_write(&ehci_cf_port_reset_rwsem);
}
-static int tegra_usb_suspend(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- struct ehci_regs __iomem *hw = tegra->ehci->regs;
- unsigned long flags;
-
- spin_lock_irqsave(&tegra->ehci->lock, flags);
-
- tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
- ehci_halt(tegra->ehci);
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
- spin_unlock_irqrestore(&tegra->ehci->lock, flags);
-
- tegra_ehci_power_down(hcd);
- return 0;
-}
-
-static int tegra_usb_resume(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- struct ehci_regs __iomem *hw = ehci->regs;
- unsigned long val;
-
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- tegra_ehci_power_up(hcd);
-
- if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
- /* Wait for the phy to detect new devices
- * before we restart the controller */
- msleep(10);
- goto restart;
- }
-
- /* Force the phy to keep data lines in suspend state */
- tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
-
- /* Enable host mode */
- tdi_reset(ehci);
-
- /* Enable Port Power */
- val = readl(&hw->port_status[0]);
- val |= PORT_POWER;
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Check if the phy resume from LP0. When the phy resume from LP0
- * USB register will be reset. */
- if (!readl(&hw->async_next)) {
- /* Program the field PTC based on the saved speed mode */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
- val |= PORT_TEST_FORCE;
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
- val |= PORT_TEST(6);
- else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
- val |= PORT_TEST(7);
- writel(val, &hw->port_status[0]);
- udelay(10);
-
- /* Disable test mode by setting PTC field to NORMAL_OP */
- val = readl(&hw->port_status[0]);
- val &= ~PORT_TEST(~0);
- writel(val, &hw->port_status[0]);
- udelay(10);
- }
-
- /* Poll until CCS is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
- PORT_CONNECT, 2000)) {
- pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
- goto restart;
- }
-
- /* Poll until PE is enabled */
- if (handshake(ehci, &hw->port_status[0], PORT_PE,
- PORT_PE, 2000)) {
- pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
- goto restart;
- }
-
- /* Clear the PCI status, to avoid an interrupt taken upon resume */
- val = readl(&hw->status);
- val |= STS_PCD;
- writel(val, &hw->status);
-
- /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
- val = readl(&hw->port_status[0]);
- if ((val & PORT_POWER) && (val & PORT_PE)) {
- val |= PORT_SUSPEND;
- writel(val, &hw->port_status[0]);
-
- /* Wait until port suspend completes */
- if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
- PORT_SUSPEND, 1000)) {
- pr_err("%s: timeout waiting for PORT_SUSPEND\n",
- __func__);
- goto restart;
- }
- }
-
- tegra_ehci_phy_restore_end(tegra->phy);
- return 0;
-
-restart:
- if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
- tegra_ehci_phy_restore_end(tegra->phy);
-
- tegra_ehci_restart(hcd);
- return 0;
-}
-
static void tegra_ehci_shutdown(struct usb_hcd *hcd)
{
struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
@@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd)
return retval;
}
-#ifdef CONFIG_PM
-static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
- int error_status = 0;
-
- error_status = ehci_bus_suspend(hcd);
- if (!error_status && tegra->power_down_on_bus_suspend) {
- tegra_usb_suspend(hcd);
- tegra->bus_suspended = 1;
- }
-
- return error_status;
-}
-
-static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
-{
- struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
- if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
- tegra_usb_resume(hcd);
- tegra->bus_suspended = 0;
- }
-
- tegra_usb_phy_preresume(tegra->phy);
- tegra->port_resuming = 1;
- return ehci_bus_resume(hcd);
-}
-#endif
-
struct temp_buffer {
void *kmalloc_ptr;
void *old_xfer_buffer;
@@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = {
.hub_control = tegra_ehci_hub_control,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
#ifdef CONFIG_PM
- .bus_suspend = tegra_ehci_bus_suspend,
- .bus_resume = tegra_ehci_bus_resume,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
@@ -603,11 +458,187 @@ static int setup_vbus_gpio(struct platform_device *pdev)
dev_err(&pdev->dev, "can't enable vbus\n");
return err;
}
- gpio_set_value(gpio, 1);
return err;
}
+#ifdef CONFIG_PM
+
+static int controller_suspend(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct ehci_hcd *ehci = tegra->ehci;
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_regs __iomem *hw = ehci->regs;
+ unsigned long flags;
+
+ if (time_before(jiffies, ehci->next_statechange))
+ msleep(10);
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+ ehci_halt(ehci);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ tegra_ehci_power_down(hcd);
+ return 0;
+}
+
+static int controller_resume(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct ehci_hcd *ehci = tegra->ehci;
+ struct usb_hcd *hcd = ehci_to_hcd(ehci);
+ struct ehci_regs __iomem *hw = ehci->regs;
+ unsigned long val;
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ tegra_ehci_power_up(hcd);
+
+ if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+ /* Wait for the phy to detect new devices
+ * before we restart the controller */
+ msleep(10);
+ goto restart;
+ }
+
+ /* Force the phy to keep data lines in suspend state */
+ tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+ /* Enable host mode */
+ tdi_reset(ehci);
+
+ /* Enable Port Power */
+ val = readl(&hw->port_status[0]);
+ val |= PORT_POWER;
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Check if the phy resume from LP0. When the phy resume from LP0
+ * USB register will be reset. */
+ if (!readl(&hw->async_next)) {
+ /* Program the field PTC based on the saved speed mode */
+ val = readl(&hw->port_status[0]);
+ val &= ~PORT_TEST(~0);
+ if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ val |= PORT_TEST_FORCE;
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+ val |= PORT_TEST(6);
+ else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+ val |= PORT_TEST(7);
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+
+ /* Disable test mode by setting PTC field to NORMAL_OP */
+ val = readl(&hw->port_status[0]);
+ val &= ~PORT_TEST(~0);
+ writel(val, &hw->port_status[0]);
+ udelay(10);
+ }
+
+ /* Poll until CCS is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+ PORT_CONNECT, 2000)) {
+ pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+ goto restart;
+ }
+
+ /* Poll until PE is enabled */
+ if (handshake(ehci, &hw->port_status[0], PORT_PE,
+ PORT_PE, 2000)) {
+ pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+ goto restart;
+ }
+
+ /* Clear the PCI status, to avoid an interrupt taken upon resume */
+ val = readl(&hw->status);
+ val |= STS_PCD;
+ writel(val, &hw->status);
+
+ /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+ val = readl(&hw->port_status[0]);
+ if ((val & PORT_POWER) && (val & PORT_PE)) {
+ val |= PORT_SUSPEND;
+ writel(val, &hw->port_status[0]);
+
+ /* Wait until port suspend completes */
+ if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+ PORT_SUSPEND, 1000)) {
+ pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+ __func__);
+ goto restart;
+ }
+ }
+
+ tegra_ehci_phy_restore_end(tegra->phy);
+ goto done;
+
+ restart:
+ if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+ tegra_ehci_phy_restore_end(tegra->phy);
+
+ tegra_ehci_restart(hcd);
+
+ done:
+ tegra_usb_phy_preresume(tegra->phy);
+ tegra->port_resuming = 1;
+ return 0;
+}
+
+static int tegra_ehci_suspend(struct device *dev)
+{
+ struct tegra_ehci_hcd *tegra =
+ platform_get_drvdata(to_platform_device(dev));
+ struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+ int rc = 0;
+
+ /*
+ * When system sleep is supported and USB controller wakeup is
+ * implemented: If the controller is runtime-suspended and the
+ * wakeup setting needs to be changed, call pm_runtime_resume().
+ */
+ if (HCD_HW_ACCESSIBLE(hcd))
+ rc = controller_suspend(dev);
+ return rc;
+}
+
+static int tegra_ehci_resume(struct device *dev)
+{
+ int rc;
+
+ rc = controller_resume(dev);
+ if (rc == 0) {
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ }
+ return rc;
+}
+
+static int tegra_ehci_runtime_suspend(struct device *dev)
+{
+ return controller_suspend(dev);
+}
+
+static int tegra_ehci_runtime_resume(struct device *dev)
+{
+ return controller_resume(dev);
+}
+
+static const struct dev_pm_ops tegra_ehci_pm_ops = {
+ .suspend = tegra_ehci_suspend,
+ .resume = tegra_ehci_resume,
+ .runtime_suspend = tegra_ehci_runtime_suspend,
+ .runtime_resume = tegra_ehci_runtime_resume,
+};
+
+#endif
+
static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
static int tegra_ehci_probe(struct platform_device *pdev)
@@ -722,7 +753,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
}
tegra->host_resumed = 1;
- tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
tegra->ehci = hcd_to_ehci(hcd);
irq = platform_get_irq(pdev, 0);
@@ -731,7 +761,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
err = -ENODEV;
goto fail;
}
- set_irq_flags(irq, IRQF_VALID);
#ifdef CONFIG_USB_OTG_UTILS
if (pdata->operating_mode == TEGRA_USB_OTG) {
@@ -747,6 +776,14 @@ static int tegra_ehci_probe(struct platform_device *pdev)
goto fail;
}
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
+ /* Don't skip the pm_runtime_forbid call if wakeup isn't working */
+ /* if (!pdata->power_down_on_bus_suspend) */
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
return err;
fail:
@@ -773,33 +810,6 @@ fail_hcd:
return err;
}
-#ifdef CONFIG_PM
-static int tegra_ehci_resume(struct platform_device *pdev)
-{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
- if (tegra->bus_suspended)
- return 0;
-
- return tegra_usb_resume(hcd);
-}
-
-static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
- if (tegra->bus_suspended)
- return 0;
-
- if (time_before(jiffies, tegra->ehci->next_statechange))
- msleep(10);
-
- return tegra_usb_suspend(hcd);
-}
-#endif
-
static int tegra_ehci_remove(struct platform_device *pdev)
{
struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
@@ -808,6 +818,10 @@ static int tegra_ehci_remove(struct platform_device *pdev)
if (tegra == NULL || hcd == NULL)
return -EINVAL;
+ pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
#ifdef CONFIG_USB_OTG_UTILS
if (tegra->transceiver) {
otg_set_host(tegra->transceiver->otg, NULL);
@@ -848,13 +862,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
static struct platform_driver tegra_ehci_driver = {
.probe = tegra_ehci_probe,
.remove = tegra_ehci_remove,
-#ifdef CONFIG_PM
- .suspend = tegra_ehci_suspend,
- .resume = tegra_ehci_resume,
-#endif
.shutdown = tegra_ehci_hcd_shutdown,
.driver = {
.name = "tegra-ehci",
.of_match_table = tegra_ehci_of_match,
+#ifdef CONFIG_PM
+ .pm = &tegra_ehci_pm_ops,
+#endif
}
};
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 09f597a..13ebeca 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -94,7 +94,7 @@ static void at91_stop_hc(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
-static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -108,7 +108,7 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-static int usb_hcd_at91_probe(const struct hc_driver *driver,
+static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval;
@@ -203,7 +203,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
* context, "rmmod" or something similar.
*
*/
-static void usb_hcd_at91_remove(struct usb_hcd *hcd,
+static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
usb_remove_hcd(hcd);
@@ -545,7 +545,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
-static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata;
int i;
@@ -620,7 +620,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}
-static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
@@ -696,7 +696,7 @@ MODULE_ALIAS("platform:at91_ohci");
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
- .remove = ohci_hcd_at91_drv_remove,
+ .remove = __devexit_p(ohci_hcd_at91_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 959145b..9dcb68f 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -423,7 +423,7 @@ alloc_sglist(int nents, int max, int vary)
unsigned i;
unsigned size = max;
- sg = kmalloc(nents * sizeof *sg, GFP_KERNEL);
+ sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
sg_init_table(sg, nents);
@@ -904,6 +904,9 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
struct ctrl_ctx context;
int i;
+ if (param->sglen == 0 || param->iterations > UINT_MAX / param->sglen)
+ return -EOPNOTSUPP;
+
spin_lock_init(&context.lock);
context.dev = dev;
init_completion(&context.complete);
@@ -1981,8 +1984,6 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
/* queued control messaging */
case 10:
- if (param->sglen == 0)
- break;
retval = 0;
dev_info(&intf->dev,
"TEST 10: queue %d control calls, %d times\n",
@@ -2276,6 +2277,8 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
if (status < 0) {
WARNING(dev, "couldn't get endpoints, %d\n",
status);
+ kfree(dev->buf);
+ kfree(dev);
return status;
}
/* may find bulk or ISO pipes */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 897edda..7020146 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -99,9 +99,7 @@ static void yurex_delete(struct kref *kref)
usb_put_dev(dev->udev);
if (dev->cntl_urb) {
usb_kill_urb(dev->cntl_urb);
- if (dev->cntl_req)
- usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
- dev->cntl_req, dev->cntl_urb->setup_dma);
+ kfree(dev->cntl_req);
if (dev->cntl_buffer)
usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
dev->cntl_buffer, dev->cntl_urb->transfer_dma);
@@ -234,9 +232,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
}
/* allocate buffer for control req */
- dev->cntl_req = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
- GFP_KERNEL,
- &dev->cntl_urb->setup_dma);
+ dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL);
if (!dev->cntl_req) {
err("Could not allocate cntl_req");
goto error;
@@ -286,7 +282,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
usb_rcvintpipe(dev->udev, dev->int_in_endpointAddr),
dev->int_buffer, YUREX_BUF_SIZE, yurex_interrupt,
dev, 1);
- dev->cntl_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ dev->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (usb_submit_urb(dev->urb, GFP_KERNEL)) {
retval = -EIO;
err("Could not submitting URB");
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 97ab975..768b4b5 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
usb_nop_xceiv_register();
musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
- return -ENODEV;
+ goto unregister;
musb->mregs += DAVINCI_BASE_OFFSET;
@@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb)
fail:
usb_put_transceiver(musb->xceiv);
+unregister:
usb_nop_xceiv_unregister();
return -ENODEV;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0f8b829..66aaccf 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -137,6 +137,9 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
int i = 0;
u8 r;
u8 power;
+ int ret;
+
+ pm_runtime_get_sync(phy->io_dev);
/* Make sure the transceiver is not in low power mode */
power = musb_readb(addr, MUSB_POWER);
@@ -154,15 +157,22 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
& MUSB_ULPI_REG_CMPLT)) {
i++;
- if (i == 10000)
- return -ETIMEDOUT;
+ if (i == 10000) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
}
r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
r &= ~MUSB_ULPI_REG_CMPLT;
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
- return musb_readb(addr, MUSB_ULPI_REG_DATA);
+ ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
+
+out:
+ pm_runtime_put(phy->io_dev);
+
+ return ret;
}
static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
@@ -171,6 +181,9 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
int i = 0;
u8 r = 0;
u8 power;
+ int ret = 0;
+
+ pm_runtime_get_sync(phy->io_dev);
/* Make sure the transceiver is not in low power mode */
power = musb_readb(addr, MUSB_POWER);
@@ -184,15 +197,20 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
& MUSB_ULPI_REG_CMPLT)) {
i++;
- if (i == 10000)
- return -ETIMEDOUT;
+ if (i == 10000) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
}
r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
r &= ~MUSB_ULPI_REG_CMPLT;
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
- return 0;
+out:
+ pm_runtime_put(phy->io_dev);
+
+ return ret;
}
#else
#define musb_ulpi_read NULL
@@ -1904,14 +1922,17 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
if (!musb->isr) {
status = -ENODEV;
- goto fail3;
+ goto fail2;
}
if (!musb->xceiv->io_ops) {
+ musb->xceiv->io_dev = musb->controller;
musb->xceiv->io_priv = musb->mregs;
musb->xceiv->io_ops = &musb_ulpi_access;
}
+ pm_runtime_get_sync(musb->controller);
+
#ifndef CONFIG_MUSB_PIO_ONLY
if (use_dma && dev->dma_mask) {
struct dma_controller *c;
@@ -2023,6 +2044,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
goto fail5;
#endif
+ pm_runtime_put(musb->controller);
+
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
({char *s;
switch (musb->board_mode) {
@@ -2047,6 +2070,9 @@ fail4:
musb_gadget_cleanup(musb);
fail3:
+ pm_runtime_put_sync(musb->controller);
+
+fail2:
if (musb->irq_wake)
device_init_wakeup(dev, 0);
musb_platform_exit(musb);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 93de517..f4a40f0 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -449,7 +449,7 @@ struct musb {
* We added this flag to forcefully disable double
* buffering until we get it working.
*/
- unsigned double_buffer_not_ok:1 __deprecated;
+ unsigned double_buffer_not_ok:1;
struct musb_hdrc_config *config;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 79cb0af..ef8d744 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2098,7 +2098,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
}
/* turn off DMA requests, discard state, stop polling ... */
- if (is_in) {
+ if (ep->epnum && is_in) {
/* giveback saves bulk toggle */
csr = musb_h_flush_rxfifo(ep, 0);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2ae0bb3..c7785e8 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -282,7 +282,8 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
static int omap2430_musb_init(struct musb *musb)
{
- u32 l, status = 0;
+ u32 l;
+ int status = 0;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev->platform_data;
struct omap_musb_board_data *data = plat->board_data;
@@ -301,7 +302,7 @@ static int omap2430_musb_init(struct musb *musb)
status = pm_runtime_get_sync(dev);
if (status < 0) {
- dev_err(dev, "pm_runtime_get_sync FAILED");
+ dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
goto err1;
}
@@ -333,6 +334,7 @@ static int omap2430_musb_init(struct musb *musb)
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+ pm_runtime_put_noidle(musb->controller);
return 0;
err1:
@@ -452,14 +454,14 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
goto err2;
}
+ pm_runtime_enable(&pdev->dev);
+
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
goto err2;
}
- pm_runtime_enable(&pdev->dev);
-
return 0;
err2:
@@ -478,7 +480,6 @@ static int __devexit omap2430_remove(struct platform_device *pdev)
platform_device_del(glue->musb);
platform_device_put(glue->musb);
- pm_runtime_put(&pdev->dev);
kfree(glue);
return 0;
@@ -491,11 +492,13 @@ static int omap2430_runtime_suspend(struct device *dev)
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- musb->context.otg_interfsel = musb_readl(musb->mregs,
- OTG_INTERFSEL);
+ if (musb) {
+ musb->context.otg_interfsel = musb_readl(musb->mregs,
+ OTG_INTERFSEL);
- omap2430_low_level_exit(musb);
- usb_phy_set_suspend(musb->xceiv, 1);
+ omap2430_low_level_exit(musb);
+ usb_phy_set_suspend(musb->xceiv, 1);
+ }
return 0;
}
@@ -505,11 +508,13 @@ static int omap2430_runtime_resume(struct device *dev)
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- omap2430_low_level_init(musb);
- musb_writel(musb->mregs, OTG_INTERFSEL,
- musb->context.otg_interfsel);
+ if (musb) {
+ omap2430_low_level_init(musb);
+ musb_writel(musb->mregs, OTG_INTERFSEL,
+ musb->context.otg_interfsel);
- usb_phy_set_suspend(musb->xceiv, 0);
+ usb_phy_set_suspend(musb->xceiv, 0);
+ }
return 0;
}
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 3ece43a..a0a2178 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work)
struct gpio_vbus_data *gpio_vbus =
container_of(work, struct gpio_vbus_data, work);
struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
- int gpio;
+ int gpio, status;
if (!gpio_vbus->phy.otg->gadget)
return;
@@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work)
*/
gpio = pdata->gpio_pullup;
if (is_vbus_powered(pdata)) {
+ status = USB_EVENT_VBUS;
gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+ gpio_vbus->phy.last_event = status;
usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
/* drawing a "unit load" is *always* OK, except for OTG */
@@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work)
/* optionally enable D+ pullup */
if (gpio_is_valid(gpio))
gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
} else {
/* optionally disable D+ pullup */
if (gpio_is_valid(gpio))
@@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work)
set_vbus_draw(gpio_vbus, 0);
usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+ status = USB_EVENT_NONE;
gpio_vbus->phy.state = OTG_STATE_B_IDLE;
+ gpio_vbus->phy.last_event = status;
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
}
}
@@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
irq, err);
goto err_irq;
}
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
+
INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 0310e2d..ec30f95 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -287,7 +287,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- port_priv->bInterfaceNumber, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_GET_TIMEOUT);
/* Convert data into an array of integers */
for (i = 0; i < length; i++)
@@ -340,12 +341,14 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, 0x0000,
- port_priv->bInterfaceNumber, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_SET_TIMEOUT);
} else {
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, data[0],
- port_priv->bInterfaceNumber, NULL, 0, 300);
+ port_priv->bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
}
kfree(buf);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index fdd5aa2..8c8bf80 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -221,7 +221,7 @@ static const struct sierra_iface_info typeB_interface_list = {
};
/* 'blacklist' of interfaces not served by this driver */
-static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11, 19, 20 };
static const struct sierra_iface_info direct_ip_interface_blacklist = {
.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
.ifaceinfo = direct_ip_non_serial_ifaces,
@@ -289,7 +289,6 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
{ USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
- { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
@@ -299,6 +298,9 @@ static const struct usb_device_id id_table[] = {
/* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x68A2), /* Sierra Wireless MC77xx in QMI mode */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},