diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/class/cdc-acm.c | 14 | ||||
-rw-r--r-- | drivers/usb/class/cdc-acm.h | 1 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 8 | ||||
-rw-r--r-- | drivers/usb/serial/cp210x.c | 1 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 1 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio_ids.h | 1 | ||||
-rw-r--r-- | drivers/usb/serial/mxu11x0.c | 20 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 18 | ||||
-rw-r--r-- | drivers/usb/serial/visor.c | 11 |
9 files changed, 68 insertions, 7 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 26ca4f9..fa4e239 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -428,7 +428,8 @@ static void acm_read_bulk_callback(struct urb *urb) set_bit(rb->index, &acm->read_urbs_free); dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n", __func__, status); - return; + if ((status != -ENOENT) || (urb->actual_length == 0)) + return; } usb_mark_last_busy(acm->dev); @@ -1404,6 +1405,8 @@ made_compressed_probe: usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), NULL, acm->writesize, acm_write_bulk, snd); snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (quirks & SEND_ZERO_PACKET) + snd->urb->transfer_flags |= URB_ZERO_PACKET; snd->instance = acm; } @@ -1838,6 +1841,11 @@ static const struct usb_device_id acm_ids[] = { }, #endif + /*Samsung phone in firmware update mode */ + { USB_DEVICE(0x04e8, 0x685d), + .driver_info = IGNORE_DEVICE, + }, + /* Exclude Infineon Flash Loader utility */ { USB_DEVICE(0x058b, 0x0041), .driver_info = IGNORE_DEVICE, @@ -1861,6 +1869,10 @@ static const struct usb_device_id acm_ids[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_CDMA) }, + { USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */ + .driver_info = SEND_ZERO_PACKET, + }, + { } }; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index dd9af38..ccfaba9 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -134,3 +134,4 @@ struct acm { #define IGNORE_DEVICE BIT(5) #define QUIRK_CONTROL_LINE_STATE BIT(6) #define CLEAR_HALT_CONDITIONS BIT(7) +#define SEND_ZERO_PACKET BIT(8) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 51b43691..350dcd9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5401,7 +5401,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) } bos = udev->bos; - udev->bos = NULL; for (i = 0; i < SET_CONFIG_TRIES; ++i) { @@ -5494,8 +5493,11 @@ done: usb_set_usb2_hardware_lpm(udev, 1); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); - usb_release_bos_descriptor(udev); - udev->bos = bos; + /* release the new BOS descriptor allocated by hub_port_init() */ + if (udev->bos != bos) { + usb_release_bos_descriptor(udev); + udev->bos = bos; + } return 0; re_enumerate: diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 9b90ad7..987813b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -99,6 +99,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a5a0376..8c660ae 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -824,6 +824,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, + { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, /* Papouch devices based on FTDI chip */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 67c6d44..a84df25 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -615,6 +615,7 @@ */ #define RATOC_VENDOR_ID 0x0584 #define RATOC_PRODUCT_ID_USB60F 0xb020 +#define RATOC_PRODUCT_ID_SCU18 0xb03a /* * Infineon Technologies diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c index e3c3f57c..6196073 100644 --- a/drivers/usb/serial/mxu11x0.c +++ b/drivers/usb/serial/mxu11x0.c @@ -368,6 +368,16 @@ static int mxu1_port_probe(struct usb_serial_port *port) return 0; } +static int mxu1_port_remove(struct usb_serial_port *port) +{ + struct mxu1_port *mxport; + + mxport = usb_get_serial_port_data(port); + kfree(mxport); + + return 0; +} + static int mxu1_startup(struct usb_serial *serial) { struct mxu1_device *mxdev; @@ -427,6 +437,14 @@ err_free_mxdev: return err; } +static void mxu1_release(struct usb_serial *serial) +{ + struct mxu1_device *mxdev; + + mxdev = usb_get_serial_data(serial); + kfree(mxdev); +} + static int mxu1_write_byte(struct usb_serial_port *port, u32 addr, u8 mask, u8 byte) { @@ -957,7 +975,9 @@ static struct usb_serial_driver mxu11x0_device = { .id_table = mxu1_idtable, .num_ports = 1, .port_probe = mxu1_port_probe, + .port_remove = mxu1_port_remove, .attach = mxu1_startup, + .release = mxu1_release, .open = mxu1_open, .close = mxu1_close, .ioctl = mxu1_ioctl, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f228060..db86e51 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -268,6 +268,8 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_CC864_SINGLE 0x1006 #define TELIT_PRODUCT_DE910_DUAL 0x1010 #define TELIT_PRODUCT_UE910_V2 0x1012 +#define TELIT_PRODUCT_LE922_USBCFG0 0x1042 +#define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 @@ -615,6 +617,16 @@ static const struct option_blacklist_info telit_le920_blacklist = { .reserved = BIT(1) | BIT(5), }; +static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = { + .sendsetup = BIT(2), + .reserved = BIT(0) | BIT(1) | BIT(3), +}; + +static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = { + .sendsetup = BIT(0), + .reserved = BIT(1) | BIT(2) | BIT(3), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -1160,6 +1172,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), @@ -1679,7 +1695,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 60afb39..337a0be 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -544,6 +544,11 @@ static int treo_attach(struct usb_serial *serial) (serial->num_interrupt_in == 0)) return 0; + if (serial->num_bulk_in < 2 || serial->num_interrupt_in < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + /* * It appears that Treos and Kyoceras want to use the * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, @@ -597,8 +602,10 @@ static int clie_5_attach(struct usb_serial *serial) */ /* some sanity check */ - if (serial->num_ports < 2) - return -1; + if (serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing bulk out endpoints\n"); + return -ENODEV; + } /* port 0 now uses the modified endpoint Address */ port = serial->port[0]; |