diff options
Diffstat (limited to 'drivers')
28 files changed, 3915 insertions, 475 deletions
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c index f364fa4..72fe0a5 100644 --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -30,6 +30,10 @@ #include <asm/signal.h> #endif +#ifdef CONFIG_MIPS +#include <asm/traps.h> +#endif + #define ARB_ERR_CAP_CLEAR (1 << 0) #define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12) #define ARB_ERR_CAP_STATUS_TEA (1 << 11) @@ -238,6 +242,29 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr, } #endif +#ifdef CONFIG_MIPS +static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup) +{ + int ret = 0; + struct brcmstb_gisb_arb_device *gdev; + u32 cap_status; + + list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next) { + cap_status = gisb_read(gdev, ARB_ERR_CAP_STATUS); + + /* Invalid captured address, bail out */ + if (!(cap_status & ARB_ERR_CAP_STATUS_VALID)) { + is_fixup = 1; + goto out; + } + + ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error"); + } +out: + return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; +} +#endif + static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id) { brcmstb_gisb_arb_decode_addr(dev_id, "timeout"); @@ -355,6 +382,9 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev) hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0, "imprecise external abort"); #endif +#ifdef CONFIG_MIPS + board_be_handler = brcmstb_bus_error_handler; +#endif dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n", gdev->base, timeout_irq, tea_irq); diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c index 1c543ef..cad49bc 100644 --- a/drivers/bus/mips_cdmm.c +++ b/drivers/bus/mips_cdmm.c @@ -599,8 +599,8 @@ BUILD_PERDEV_HELPER(cpu_up) /* int mips_cdmm_cpu_up_helper(...) */ * mips_cdmm_bus_down() - Tear down the CDMM bus. * @data: Pointer to unsigned int CPU number. * - * This work_on_cpu callback function is executed on a given CPU to call the - * CDMM driver cpu_down callback for all devices on that CPU. + * This function is executed on the hotplugged CPU and calls the CDMM + * driver cpu_down callback for all devices on that CPU. */ static long mips_cdmm_bus_down(void *data) { @@ -630,7 +630,9 @@ static long mips_cdmm_bus_down(void *data) * CDMM devices on that CPU, or to call the CDMM driver cpu_up callback for all * devices already discovered on that CPU. * - * It is used during initialisation and when CPUs are brought online. + * It is used as work_on_cpu callback function during + * initialisation. When CPUs are brought online the function is + * invoked directly on the hotplugged CPU. */ static long mips_cdmm_bus_up(void *data) { @@ -677,10 +679,10 @@ static int mips_cdmm_cpu_notify(struct notifier_block *nb, switch (action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: case CPU_DOWN_FAILED: - work_on_cpu(cpu, mips_cdmm_bus_up, &cpu); + mips_cdmm_bus_up(&cpu); break; case CPU_DOWN_PREPARE: - work_on_cpu(cpu, mips_cdmm_bus_down, &cpu); + mips_cdmm_bus_down(&cpu); break; default: return NOTIFY_DONE; diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index c455549..90518cd 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -197,6 +197,9 @@ config COMMON_CLK_PXA ---help--- Support for the Marvell PXA SoC. +config COMMON_CLK_PIC32 + def_bool COMMON_CLK && MACH_PIC32 + source "drivers/clk/bcm/Kconfig" source "drivers/clk/hisilicon/Kconfig" source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 46869d6..18e64bb 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_ARCH_MXC) += imx/ obj-$(CONFIG_MACH_INGENIC) += ingenic/ obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ +obj-$(CONFIG_MACH_PIC32) += microchip/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif diff --git a/drivers/clk/microchip/Makefile b/drivers/clk/microchip/Makefile new file mode 100644 index 0000000..2152f41 --- /dev/null +++ b/drivers/clk/microchip/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_COMMON_CLK_PIC32) += clk-core.o +obj-$(CONFIG_PIC32MZDA) += clk-pic32mzda.o diff --git a/drivers/clk/microchip/clk-core.c b/drivers/clk/microchip/clk-core.c new file mode 100644 index 0000000..ca85cea --- /dev/null +++ b/drivers/clk/microchip/clk-core.c @@ -0,0 +1,1031 @@ +/* + * Purna Chandra Mandal,<purna.mandal@microchip.com> + * Copyright (C) 2015 Microchip Technology Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <asm/mach-pic32/pic32.h> +#include <asm/traps.h> + +#include "clk-core.h" + +/* OSCCON Reg fields */ +#define OSC_CUR_MASK 0x07 +#define OSC_CUR_SHIFT 12 +#define OSC_NEW_MASK 0x07 +#define OSC_NEW_SHIFT 8 +#define OSC_SWEN BIT(0) + +/* SPLLCON Reg fields */ +#define PLL_RANGE_MASK 0x07 +#define PLL_RANGE_SHIFT 0 +#define PLL_ICLK_MASK 0x01 +#define PLL_ICLK_SHIFT 7 +#define PLL_IDIV_MASK 0x07 +#define PLL_IDIV_SHIFT 8 +#define PLL_ODIV_MASK 0x07 +#define PLL_ODIV_SHIFT 24 +#define PLL_MULT_MASK 0x7F +#define PLL_MULT_SHIFT 16 +#define PLL_MULT_MAX 128 +#define PLL_ODIV_MIN 1 +#define PLL_ODIV_MAX 5 + +/* Peripheral Bus Clock Reg Fields */ +#define PB_DIV_MASK 0x7f +#define PB_DIV_SHIFT 0 +#define PB_DIV_READY BIT(11) +#define PB_DIV_ENABLE BIT(15) +#define PB_DIV_MAX 128 +#define PB_DIV_MIN 0 + +/* Reference Oscillator Control Reg fields */ +#define REFO_SEL_MASK 0x0f +#define REFO_SEL_SHIFT 0 +#define REFO_ACTIVE BIT(8) +#define REFO_DIVSW_EN BIT(9) +#define REFO_OE BIT(12) +#define REFO_ON BIT(15) +#define REFO_DIV_SHIFT 16 +#define REFO_DIV_MASK 0x7fff + +/* Reference Oscillator Trim Register Fields */ +#define REFO_TRIM_REG 0x10 +#define REFO_TRIM_MASK 0x1ff +#define REFO_TRIM_SHIFT 23 +#define REFO_TRIM_MAX 511 + +/* Mux Slew Control Register fields */ +#define SLEW_BUSY BIT(0) +#define SLEW_DOWNEN BIT(1) +#define SLEW_UPEN BIT(2) +#define SLEW_DIV 0x07 +#define SLEW_DIV_SHIFT 8 +#define SLEW_SYSDIV 0x0f +#define SLEW_SYSDIV_SHIFT 20 + +/* Clock Poll Timeout */ +#define LOCK_TIMEOUT_US USEC_PER_MSEC + +/* SoC specific clock needed during SPLL clock rate switch */ +static struct clk_hw *pic32_sclk_hw; + +/* add instruction pipeline delay while CPU clock is in-transition. */ +#define cpu_nop5() \ +do { \ + __asm__ __volatile__("nop"); \ + __asm__ __volatile__("nop"); \ + __asm__ __volatile__("nop"); \ + __asm__ __volatile__("nop"); \ + __asm__ __volatile__("nop"); \ +} while (0) + +/* Perpheral bus clocks */ +struct pic32_periph_clk { + struct clk_hw hw; + void __iomem *ctrl_reg; + struct pic32_clk_common *core; +}; + +#define clkhw_to_pbclk(_hw) container_of(_hw, struct pic32_periph_clk, hw) + +static int pbclk_is_enabled(struct clk_hw *hw) +{ + struct pic32_periph_clk *pb = clkhw_to_pbclk(hw); + + return readl(pb->ctrl_reg) & PB_DIV_ENABLE; +} + +static int pbclk_enable(struct clk_hw *hw) +{ + struct pic32_periph_clk *pb = clkhw_to_pbclk(hw); + + writel(PB_DIV_ENABLE, PIC32_SET(pb->ctrl_reg)); + return 0; +} + +static void pbclk_disable(struct clk_hw *hw) +{ + struct pic32_periph_clk *pb = clkhw_to_pbclk(hw); + + writel(PB_DIV_ENABLE, PIC32_CLR(pb->ctrl_reg)); +} + +static unsigned long calc_best_divided_rate(unsigned long rate, + unsigned long parent_rate, + u32 divider_max, + u32 divider_min) +{ + unsigned long divided_rate, divided_rate_down, best_rate; + unsigned long div, div_up; + + /* eq. clk_rate = parent_rate / divider. + * + * Find best divider to produce closest of target divided rate. + */ + div = parent_rate / rate; + div = clamp_val(div, divider_min, divider_max); + div_up = clamp_val(div + 1, divider_min, divider_max); + + divided_rate = parent_rate / div; + divided_rate_down = parent_rate / div_up; + if (abs(rate - divided_rate_down) < abs(rate - divided_rate)) + best_rate = divided_rate_down; + else + best_rate = divided_rate; + + return best_rate; +} + +static inline u32 pbclk_read_pbdiv(struct pic32_periph_clk *pb) +{ + return ((readl(pb->ctrl_reg) >> PB_DIV_SHIFT) & PB_DIV_MASK) + 1; +} + +static unsigned long pbclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct pic32_periph_clk *pb = clkhw_to_pbclk(hw); + + return parent_rate / pbclk_read_pbdiv(pb); +} + +static long pbclk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + return calc_best_divided_rate(rate, *parent_rate, + PB_DIV_MAX, PB_DIV_MIN); +} + +static int pbclk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct pic32_periph_clk *pb = clkhw_to_pbclk(hw); + unsigned long flags; + u32 v, div; + int err; + + /* check & wait for DIV_READY */ + err = readl_poll_timeout(pb->ctrl_reg, v, v & PB_DIV_READY, + 1, LOCK_TIMEOUT_US); + if (err) + return err; + + /* calculate clkdiv and best rate */ + div = DIV_ROUND_CLOSEST(parent_rate, rate); + + spin_lock_irqsave(&pb->core->reg_lock, flags); + + /* apply new div */ + v = readl(pb->ctrl_reg); + v &= ~PB_DIV_MASK; + v |= (div - 1); + + pic32_syskey_unlock(); + + writel(v, pb->ctrl_reg); + + spin_unlock_irqrestore(&pb->core->reg_lock, flags); + + /* wait again, for pbdivready */ + err = readl_poll_timeout_atomic(pb->ctrl_reg, v, v & PB_DIV_READY, + 1, LOCK_TIMEOUT_US); + if (err) + return err; + + /* confirm that new div is applied correctly */ + return (pbclk_read_pbdiv(pb) == div) ? 0 : -EBUSY; +} + +const struct clk_ops pic32_pbclk_ops = { + .enable = pbclk_enable, + .disable = pbclk_disable, + .is_enabled = pbclk_is_enabled, + .recalc_rate = pbclk_recalc_rate, + .round_rate = pbclk_round_rate, + .set_rate = pbclk_set_rate, +}; + +struct clk *pic32_periph_clk_register(const struct pic32_periph_clk_data *desc, + struct pic32_clk_common *core) +{ + struct pic32_periph_clk *pbclk; + struct clk *clk; + + pbclk = devm_kzalloc(core->dev, sizeof(*pbclk), GFP_KERNEL); + if (!pbclk) + return ERR_PTR(-ENOMEM); + + pbclk->hw.init = &desc->init_data; + pbclk->core = core; + pbclk->ctrl_reg = desc->ctrl_reg + core->iobase; + + clk = devm_clk_register(core->dev, &pbclk->hw); + if (IS_ERR(clk)) { + dev_err(core->dev, "%s: clk_register() failed\n", __func__); + devm_kfree(core->dev, pbclk); + } + + return clk; +} + +/* Reference oscillator operations */ +struct pic32_ref_osc { + struct clk_hw hw; + void __iomem *ctrl_reg; + const u32 *parent_map; + struct pic32_clk_common *core; +}; + +#define clkhw_to_refosc(_hw) container_of(_hw, struct pic32_ref_osc, hw) + +static int roclk_is_enabled(struct clk_hw *hw) +{ + struct pic32_ref_osc *refo = clkhw_to_refosc(hw); + + return readl(refo->ctrl_reg) & REFO_ON; +} + +static int roclk_enable(struct clk_hw *hw) +{ + struct pic32_ref_osc *refo = clkhw_to_refosc(hw); + + writel(REFO_ON | REFO_OE, PIC32_SET(refo->ctrl_reg)); + return 0; +} + +static void roclk_disable(struct clk_hw *hw) +{ + struct pic32_ref_osc *refo = clkhw_to_refosc(hw); + + writel(REFO_ON | REFO_OE, PIC32_CLR(refo->ctrl_reg)); +} + +static void roclk_init(struct clk_hw *hw) +{ + /* initialize clock in disabled state */ + roclk_disable(hw); +} + +static u8 roclk_get_parent(struct clk_hw *hw) +{ + struct pic32_ref_osc *refo = clkhw_to_refosc(hw); + u32 v, i; + + v = (readl(refo->ctrl_reg) >> REFO_SEL_SHIFT) & REFO_SEL_MASK; + + if (!refo->parent_map) + return v; + + for (i = 0; i < clk_hw_get_num_parents(hw); i++) + if (refo->parent_map[i] == v) + return i; + + return -EINVAL; +} + +static unsigned long roclk_calc_rate(unsigned long parent_rate, + u32 rodiv, u32 rotrim) +{ + u64 rate64; + + /* fout = fin / [2 * {div + (trim / 512)}] + * = fin * 512 / [1024 * div + 2 * trim] + * = fin * 256 / (512 * div + trim) + * = (fin << 8) / ((div << 9) + trim) + */ + if (rotrim) { + rodiv = (rodiv << 9) + rotrim; + rate64 = parent_rate; + rate64 <<= 8; + do_div(rate64, rodiv); + } else if (rodiv) { + rate64 = parent_rate / (rodiv << 1); + } else { + rate64 = parent_rate; + } + return rate64; +} + +static void roclk_calc_div_trim(unsigned long rate, + unsigned long parent_rate, + u32 *rodiv_p, u32 *rotrim_p) +{ + u32 div, rotrim, rodiv; + u64 frac; + + /* Find integer approximation of floating-point arithmetic. + * fout = fin / [2 * {rodiv + (rotrim / 512)}] ... (1) + * i.e. fout = fin / 2 * DIV + * whereas DIV = rodiv + (rotrim / 512) + * + * Since kernel does not perform floating-point arithmatic so + * (rotrim/512) will be zero. And DIV & rodiv will result same. + * + * ie. fout = (fin * 256) / [(512 * rodiv) + rotrim] ... from (1) + * ie. rotrim = ((fin * 256) / fout) - (512 * DIV) + */ + if (parent_rate <= rate) { + div = 0; + frac = 0; + rodiv = 0; + rotrim = 0; + } else { + div = parent_rate / (rate << 1); + frac = parent_rate; + frac <<= 8; + do_div(frac, rate); + frac -= (u64)(div << 9); + + rodiv = (div > REFO_DIV_MASK) ? REFO_DIV_MASK : div; + rotrim = (frac >= REFO_TRIM_MAX) ? REFO_TRIM_MAX : frac; + } + + if (rodiv_p) + *rodiv_p = rodiv; + + if (rotrim_p) + *rotrim_p = rotrim; +} + +static unsigned long roclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct pic32_ref_osc *refo = clkhw_to_refosc(hw); + u32 v, rodiv, rotrim; + + /* get rodiv */ + v = readl(refo->ctrl_reg); + rodiv = (v >> REFO_DIV_SHIFT) & REFO_DIV_MASK; + + /* get trim */ + v = readl(refo->ctrl_reg + REFO_TRIM_REG); + rotrim = (v >> REFO_TRIM_SHIFT) & REFO_TRIM_MASK; + + return roclk_calc_rate(parent_rate, rodiv, rotrim); +} + +static long roclk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + u32 rotrim, rodiv; + + /* calculate dividers for new rate */ + roclk_calc_div_trim(rate, *parent_rate, &rodiv, &rotrim); + + /* caclulate new rate (rounding) based on new rodiv & rotrim */ + return roclk_calc_rate(*parent_rate, rodiv, rotrim); +} + +static int roclk_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct clk_hw *parent_clk, *best_parent_clk = NULL; + unsigned int i, delta, best_delta = -1; + unsigned long parent_rate, best_parent_rate = 0; + unsigned long best = 0, nearest_rate; + + /* find a parent which can generate nearest clkrate >= rate */ + for (i = 0; i < clk_hw_get_num_parents(hw); i++) { + /* get parent */ + parent_clk = clk_hw_get_parent_by_index(hw, i); + if (!parent_clk) + continue; + + /* skip if parent runs slower than target rate */ + parent_rate = clk_hw_get_rate(parent_clk); + if (req->rate > parent_rate) + continue; + + nearest_rate = roclk_round_rate(hw, req->rate, &parent_rate); + delta = abs(nearest_rate - req->rate); + if ((nearest_rate >= req->rate) && (delta < best_delta)) { + best_parent_clk = parent_clk; + best_parent_rate = parent_rate; + best = nearest_rate; + best_delta = delta; + + if (delta == 0) + break; + } + } + + /* if no match found, retain old rate */ + if (!best_parent_clk) { + pr_err("%s:%s, no parent found for rate %lu.\n", + __func__, clk_hw_get_name(hw), req->rate); + return clk_hw_get_rate(hw); + } + + pr_debug("%s,rate %lu, best_parent(%s, %lu), best %lu, delta %d\n", + clk_hw_get_name(hw), req->rate, + clk_hw_get_name(best_parent_clk), best_parent_rate, + best, best_delta); + + if (req->best_parent_rate) + req->best_parent_rate = best_parent_rate; + + if (req->best_parent_hw) + req->best_parent_hw = best_parent_clk; + + return best; +} + +static int roclk_set_parent(struct clk_hw *hw, u8 index) +{ + struct pic32_ref_osc *refo = clkhw_to_refosc(hw); + unsigned long flags; + u32 v; + int err; + + if (refo->parent_map) + index = refo->parent_map[index]; + + /* wait until ACTIVE bit is zero or timeout */ + err = readl_poll_timeout(refo->ctrl_reg, v, !(v & REFO_ACTIVE), + 1, LOCK_TIMEOUT_US); + if (err) { + pr_err("%s: poll failed, clk active\n", clk_hw_get_name(hw)); + return err; + } + + spin_lock_irqsave(&refo->core->reg_lock, flags); + + pic32_syskey_unlock(); + + /* calculate & apply new */ + v = readl(refo->ctrl_reg); + v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT); + v |= index << REFO_SEL_SHIFT; + + writel(v, refo->ctrl_reg); + + spin_unlock_irqrestore(&refo->core->reg_lock, flags); + + return 0; +} + +static int roclk_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 index) +{ + struct pic32_ref_osc *refo = clkhw_to_refosc(hw); + unsigned long flags; + u32 trim, rodiv, v; + int err; + + /* calculate new rodiv & rotrim for new rate */ + roclk_calc_div_trim(rate, parent_rate, &rodiv, &trim); + + pr_debug("parent_rate = %lu, rate = %lu, div = %d, trim = %d\n", + parent_rate, rate, rodiv, trim); + + /* wait till source change is active */ + err = readl_poll_timeout(refo->ctrl_reg, v, + !(v & (REFO_ACTIVE | REFO_DIVSW_EN)), + 1, LOCK_TIMEOUT_US); + if (err) { + pr_err("%s: poll timedout, clock is still active\n", __func__); + return err; + } + + spin_lock_irqsave(&refo->core->reg_lock, flags); + v = readl(refo->ctrl_reg); + + pic32_syskey_unlock(); + + /* apply parent, if required */ + if (refo->parent_map) + index = refo->parent_map[index]; + + v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT); + v |= index << REFO_SEL_SHIFT; + + /* apply RODIV */ + v &= ~(REFO_DIV_MASK << REFO_DIV_SHIFT); + v |= rodiv << REFO_DIV_SHIFT; + writel(v, refo->ctrl_reg); + + /* apply ROTRIM */ + v = readl(refo->ctrl_reg + REFO_TRIM_REG); + v &= ~(REFO_TRIM_MASK << REFO_TRIM_SHIFT); + v |= trim << REFO_TRIM_SHIFT; + writel(v, refo->ctrl_reg + REFO_TRIM_REG); + + /* enable & activate divider switching */ + writel(REFO_ON | REFO_DIVSW_EN, PIC32_SET(refo->ctrl_reg)); + + /* wait till divswen is in-progress */ + err = readl_poll_timeout_atomic(refo->ctrl_reg, v, !(v & REFO_DIVSW_EN), + 1, LOCK_TIMEOUT_US); + /* leave the clk gated as it was */ + writel(REFO_ON, PIC32_CLR(refo->ctrl_reg)); + + spin_unlock_irqrestore(&refo->core->reg_lock, flags); + + return err; +} + +static int roclk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u8 index = roclk_get_parent(hw); + + return roclk_set_rate_and_parent(hw, rate, parent_rate, index); +} + +const struct clk_ops pic32_roclk_ops = { + .enable = roclk_enable, + .disable = roclk_disable, + .is_enabled = roclk_is_enabled, + .get_parent = roclk_get_parent, + .set_parent = roclk_set_parent, + .determine_rate = roclk_determine_rate, + .recalc_rate = roclk_recalc_rate, + .set_rate_and_parent = roclk_set_rate_and_parent, + .set_rate = roclk_set_rate, + .init = roclk_init, +}; + +struct clk *pic32_refo_clk_register(const struct pic32_ref_osc_data *data, + struct pic32_clk_common *core) +{ + struct pic32_ref_osc *refo; + struct clk *clk; + + refo = devm_kzalloc(core->dev, sizeof(*refo), GFP_KERNEL); + if (!refo) + return ERR_PTR(-ENOMEM); + + refo->core = core; + refo->hw.init = &data->init_data; + refo->ctrl_reg = data->ctrl_reg + core->iobase; + refo->parent_map = data->parent_map; + + clk = devm_clk_register(core->dev, &refo->hw); + if (IS_ERR(clk)) + dev_err(core->dev, "%s: clk_register() failed\n", __func__); + + return clk; +} + +struct pic32_sys_pll { + struct clk_hw hw; + void __iomem *ctrl_reg; + void __iomem *status_reg; + u32 lock_mask; + u32 idiv; /* PLL iclk divider, treated fixed */ + struct pic32_clk_common *core; +}; + +#define clkhw_to_spll(_hw) container_of(_hw, struct pic32_sys_pll, hw) + +static inline u32 spll_odiv_to_divider(u32 odiv) +{ + odiv = clamp_val(odiv, PLL_ODIV_MIN, PLL_ODIV_MAX); + + return 1 << odiv; +} + +static unsigned long spll_calc_mult_div(struct pic32_sys_pll *pll, + unsigned long rate, + unsigned long parent_rate, + u32 *mult_p, u32 *odiv_p) +{ + u32 mul, div, best_mul = 1, best_div = 1; + unsigned long new_rate, best_rate = rate; + unsigned int best_delta = -1, delta, match_found = 0; + u64 rate64; + + parent_rate /= pll->idiv; + + for (mul = 1; mul <= PLL_MULT_MAX; mul++) { + for (div = PLL_ODIV_MIN; div <= PLL_ODIV_MAX; div++) { + rate64 = parent_rate; + rate64 *= mul; + do_div(rate64, 1 << div); + new_rate = rate64; + delta = abs(rate - new_rate); + if ((new_rate >= rate) && (delta < best_delta)) { + best_delta = delta; + best_rate = new_rate; + best_mul = mul; + best_div = div; + match_found = 1; + } + } + } + + if (!match_found) { + pr_warn("spll: no match found\n"); + return 0; + } + + pr_debug("rate %lu, par_rate %lu/mult %u, div %u, best_rate %lu\n", + rate, parent_rate, best_mul, best_div, best_rate); + + if (mult_p) + *mult_p = best_mul - 1; + + if (odiv_p) + *odiv_p = best_div; + + return best_rate; +} + +static unsigned long spll_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct pic32_sys_pll *pll = clkhw_to_spll(hw); + unsigned long pll_in_rate; + u32 mult, odiv, div, v; + u64 rate64; + + v = readl(pll->ctrl_reg); + odiv = ((v >> PLL_ODIV_SHIFT) & PLL_ODIV_MASK); + mult = ((v >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; + div = spll_odiv_to_divider(odiv); + + /* pll_in_rate = parent_rate / idiv + * pll_out_rate = pll_in_rate * mult / div; + */ + pll_in_rate = parent_rate / pll->idiv; + rate64 = pll_in_rate; + rate64 *= mult; + do_div(rate64, div); + + return rate64; +} + +static long spll_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct pic32_sys_pll *pll = clkhw_to_spll(hw); + + return spll_calc_mult_div(pll, rate, *parent_rate, NULL, NULL); +} + +static int spll_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct pic32_sys_pll *pll = clkhw_to_spll(hw); + unsigned long ret, flags; + u32 mult, odiv, v; + int err; + + ret = spll_calc_mult_div(pll, rate, parent_rate, &mult, &odiv); + if (!ret) + return -EINVAL; + + /* + * We can't change SPLL counters when it is in-active use + * by SYSCLK. So check before applying new counters/rate. + */ + + /* Is spll_clk active parent of sys_clk ? */ + if (unlikely(clk_hw_get_parent(pic32_sclk_hw) == hw)) { + pr_err("%s: failed, clk in-use\n", __func__); + return -EBUSY; + } + + spin_lock_irqsave(&pll->core->reg_lock, flags); + + /* apply new multiplier & divisor */ + v = readl(pll->ctrl_reg); + v &= ~(PLL_MULT_MASK << PLL_MULT_SHIFT); + v &= ~(PLL_ODIV_MASK << PLL_ODIV_SHIFT); + v |= (mult << PLL_MULT_SHIFT) | (odiv << PLL_ODIV_SHIFT); + + /* sys unlock before write */ + pic32_syskey_unlock(); + + writel(v, pll->ctrl_reg); + cpu_relax(); + + /* insert few nops (5-stage) to ensure CPU does not hang */ + cpu_nop5(); + cpu_nop5(); + + /* Wait until PLL is locked (maximum 100 usecs). */ + err = readl_poll_timeout_atomic(pll->status_reg, v, + v & pll->lock_mask, 1, 100); + spin_unlock_irqrestore(&pll->core->reg_lock, flags); + + return err; +} + +/* SPLL clock operation */ +const struct clk_ops pic32_spll_ops = { + .recalc_rate = spll_clk_recalc_rate, + .round_rate = spll_clk_round_rate, + .set_rate = spll_clk_set_rate, +}; + +struct clk *pic32_spll_clk_register(const struct pic32_sys_pll_data *data, + struct pic32_clk_common *core) +{ + struct pic32_sys_pll *spll; + struct clk *clk; + + spll = devm_kzalloc(core->dev, sizeof(*spll), GFP_KERNEL); + if (!spll) + return ERR_PTR(-ENOMEM); + + spll->core = core; + spll->hw.init = &data->init_data; + spll->ctrl_reg = data->ctrl_reg + core->iobase; + spll->status_reg = data->status_reg + core->iobase; + spll->lock_mask = data->lock_mask; + + /* cache PLL idiv; PLL driver uses it as constant.*/ + spll->idiv = (readl(spll->ctrl_reg) >> PLL_IDIV_SHIFT) & PLL_IDIV_MASK; + spll->idiv += 1; + + clk = devm_clk_register(core->dev, &spll->hw); + if (IS_ERR(clk)) + dev_err(core->dev, "sys_pll: clk_register() failed\n"); + + return clk; +} + +/* System mux clock(aka SCLK) */ + +struct pic32_sys_clk { + struct clk_hw hw; + void __iomem *mux_reg; + void __iomem *slew_reg; + u32 slew_div; + const u32 *parent_map; + struct pic32_clk_common *core; +}; + +#define clkhw_to_sys_clk(_hw) container_of(_hw, struct pic32_sys_clk, hw) + +static unsigned long sclk_get_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw); + u32 div; + + div = (readl(sclk->slew_reg) >> SLEW_SYSDIV_SHIFT) & SLEW_SYSDIV; + div += 1; /* sys-div to divider */ + + return parent_rate / div; +} + +static long sclk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + return calc_best_divided_rate(rate, *parent_rate, SLEW_SYSDIV, 1); +} + +static int sclk_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw); + unsigned long flags; + u32 v, div; + int err; + + div = parent_rate / rate; + + spin_lock_irqsave(&sclk->core->reg_lock, flags); + + /* apply new div */ + v = readl(sclk->slew_reg); + v &= ~(SLEW_SYSDIV << SLEW_SYSDIV_SHIFT); + v |= (div - 1) << SLEW_SYSDIV_SHIFT; + + pic32_syskey_unlock(); + + writel(v, sclk->slew_reg); + + /* wait until BUSY is cleared */ + err = readl_poll_timeout_atomic(sclk->slew_reg, v, + !(v & SLEW_BUSY), 1, LOCK_TIMEOUT_US); + + spin_unlock_irqrestore(&sclk->core->reg_lock, flags); + + return err; +} + +static u8 sclk_get_parent(struct clk_hw *hw) +{ + struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw); + u32 i, v; + + v = (readl(sclk->mux_reg) >> OSC_CUR_SHIFT) & OSC_CUR_MASK; + + if (!sclk->parent_map) + return v; + + for (i = 0; i < clk_hw_get_num_parents(hw); i++) + if (sclk->parent_map[i] == v) + return i; + return -EINVAL; +} + +static int sclk_set_parent(struct clk_hw *hw, u8 index) +{ + struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw); + unsigned long flags; + u32 nosc, cosc, v; + int err; + + spin_lock_irqsave(&sclk->core->reg_lock, flags); + + /* find new_osc */ + nosc = sclk->parent_map ? sclk->parent_map[index] : index; + + /* set new parent */ + v = readl(sclk->mux_reg); + v &= ~(OSC_NEW_MASK << OSC_NEW_SHIFT); + v |= nosc << OSC_NEW_SHIFT; + + pic32_syskey_unlock(); + + writel(v, sclk->mux_reg); + + /* initate switch */ + writel(OSC_SWEN, PIC32_SET(sclk->mux_reg)); + cpu_relax(); + + /* add nop to flush pipeline (as cpu_clk is in-flux) */ + cpu_nop5(); + + /* wait for SWEN bit to clear */ + err = readl_poll_timeout_atomic(sclk->slew_reg, v, + !(v & OSC_SWEN), 1, LOCK_TIMEOUT_US); + + spin_unlock_irqrestore(&sclk->core->reg_lock, flags); + + /* + * SCLK clock-switching logic might reject a clock switching request + * if pre-requisites (like new clk_src not present or unstable) are + * not met. + * So confirm before claiming success. + */ + cosc = (readl(sclk->mux_reg) >> OSC_CUR_SHIFT) & OSC_CUR_MASK; + if (cosc != nosc) { + pr_err("%s: err, failed to set_parent() to %d, current %d\n", + clk_hw_get_name(hw), nosc, cosc); + err = -EBUSY; + } + + return err; +} + +static void sclk_init(struct clk_hw *hw) +{ + struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw); + unsigned long flags; + u32 v; + + /* Maintain reference to this clk, required in spll_clk_set_rate() */ + pic32_sclk_hw = hw; + + /* apply slew divider on both up and down scaling */ + if (sclk->slew_div) { + spin_lock_irqsave(&sclk->core->reg_lock, flags); + v = readl(sclk->slew_reg); + v &= ~(SLEW_DIV << SLEW_DIV_SHIFT); + v |= sclk->slew_div << SLEW_DIV_SHIFT; + v |= SLEW_DOWNEN | SLEW_UPEN; + writel(v, sclk->slew_reg); + spin_unlock_irqrestore(&sclk->core->reg_lock, flags); + } +} + +/* sclk with post-divider */ +const struct clk_ops pic32_sclk_ops = { + .get_parent = sclk_get_parent, + .set_parent = sclk_set_parent, + .round_rate = sclk_round_rate, + .set_rate = sclk_set_rate, + .recalc_rate = sclk_get_rate, + .init = sclk_init, + .determine_rate = __clk_mux_determine_rate, +}; + +/* sclk with no slew and no post-divider */ +const struct clk_ops pic32_sclk_no_div_ops = { + .get_parent = sclk_get_parent, + .set_parent = sclk_set_parent, + .init = sclk_init, + .determine_rate = __clk_mux_determine_rate, +}; + +struct clk *pic32_sys_clk_register(const struct pic32_sys_clk_data *data, + struct pic32_clk_common *core) +{ + struct pic32_sys_clk *sclk; + struct clk *clk; + + sclk = devm_kzalloc(core->dev, sizeof(*sclk), GFP_KERNEL); + if (!sclk) + return ERR_PTR(-ENOMEM); + + sclk->core = core; + sclk->hw.init = &data->init_data; + sclk->mux_reg = data->mux_reg + core->iobase; + sclk->slew_reg = data->slew_reg + core->iobase; + sclk->slew_div = data->slew_div; + sclk->parent_map = data->parent_map; + + clk = devm_clk_register(core->dev, &sclk->hw); + if (IS_ERR(clk)) + dev_err(core->dev, "%s: clk register failed\n", __func__); + + return clk; +} + +/* secondary oscillator */ +struct pic32_sec_osc { + struct clk_hw hw; + void __iomem *enable_reg; + void __iomem *status_reg; + u32 enable_mask; + u32 status_mask; + unsigned long fixed_rate; + struct pic32_clk_common *core; +}; + +#define clkhw_to_sosc(_hw) container_of(_hw, struct pic32_sec_osc, hw) +static int sosc_clk_enable(struct clk_hw *hw) +{ + struct pic32_sec_osc *sosc = clkhw_to_sosc(hw); + u32 v; + + /* enable SOSC */ + pic32_syskey_unlock(); + writel(sosc->enable_mask, PIC32_SET(sosc->enable_reg)); + + /* wait till warm-up period expires or ready-status is updated */ + return readl_poll_timeout_atomic(sosc->status_reg, v, + v & sosc->status_mask, 1, 100); +} + +static void sosc_clk_disable(struct clk_hw *hw) +{ + struct pic32_sec_osc *sosc = clkhw_to_sosc(hw); + + pic32_syskey_unlock(); + writel(sosc->enable_mask, PIC32_CLR(sosc->enable_reg)); +} + +static int sosc_clk_is_enabled(struct clk_hw *hw) +{ + struct pic32_sec_osc *sosc = clkhw_to_sosc(hw); + u32 enabled, ready; + + /* check enabled and ready status */ + enabled = readl(sosc->enable_reg) & sosc->enable_mask; + ready = readl(sosc->status_reg) & sosc->status_mask; + + return enabled && ready; +} + +static unsigned long sosc_clk_calc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return clkhw_to_sosc(hw)->fixed_rate; +} + +const struct clk_ops pic32_sosc_ops = { + .enable = sosc_clk_enable, + .disable = sosc_clk_disable, + .is_enabled = sosc_clk_is_enabled, + .recalc_rate = sosc_clk_calc_rate, +}; + +struct clk *pic32_sosc_clk_register(const struct pic32_sec_osc_data *data, + struct pic32_clk_common *core) +{ + struct pic32_sec_osc *sosc; + + sosc = devm_kzalloc(core->dev, sizeof(*sosc), GFP_KERNEL); + if (!sosc) + return ERR_PTR(-ENOMEM); + + sosc->core = core; + sosc->hw.init = &data->init_data; + sosc->fixed_rate = data->fixed_rate; + sosc->enable_mask = data->enable_mask; + sosc->status_mask = data->status_mask; + sosc->enable_reg = data->enable_reg + core->iobase; + sosc->status_reg = data->status_reg + core->iobase; + + return devm_clk_register(core->dev, &sosc->hw); +} diff --git a/drivers/clk/microchip/clk-core.h b/drivers/clk/microchip/clk-core.h new file mode 100644 index 0000000..8566642 --- /dev/null +++ b/drivers/clk/microchip/clk-core.h @@ -0,0 +1,84 @@ +/* + * Purna Chandra Mandal,<purna.mandal@microchip.com> + * Copyright (C) 2015 Microchip Technology Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#ifndef __MICROCHIP_CLK_PIC32_H_ +#define __MICROCHIP_CLK_PIC32_H_ + +#include <linux/clk-provider.h> + +/* PIC32 clock data */ +struct pic32_clk_common { + struct device *dev; + void __iomem *iobase; + spinlock_t reg_lock; /* clock lock */ +}; + +/* System PLL clock */ +struct pic32_sys_pll_data { + struct clk_init_data init_data; + const u32 ctrl_reg; + const u32 status_reg; + const u32 lock_mask; +}; + +/* System clock */ +struct pic32_sys_clk_data { + struct clk_init_data init_data; + const u32 mux_reg; + const u32 slew_reg; + const u32 *parent_map; + const u32 slew_div; +}; + +/* Reference Oscillator clock */ +struct pic32_ref_osc_data { + struct clk_init_data init_data; + const u32 ctrl_reg; + const u32 *parent_map; +}; + +/* Peripheral Bus clock */ +struct pic32_periph_clk_data { + struct clk_init_data init_data; + const u32 ctrl_reg; +}; + +/* External Secondary Oscillator clock */ +struct pic32_sec_osc_data { + struct clk_init_data init_data; + const u32 enable_reg; + const u32 status_reg; + const u32 enable_mask; + const u32 status_mask; + const unsigned long fixed_rate; +}; + +extern const struct clk_ops pic32_pbclk_ops; +extern const struct clk_ops pic32_sclk_ops; +extern const struct clk_ops pic32_sclk_no_div_ops; +extern const struct clk_ops pic32_spll_ops; +extern const struct clk_ops pic32_roclk_ops; +extern const struct clk_ops pic32_sosc_ops; + +struct clk *pic32_periph_clk_register(const struct pic32_periph_clk_data *data, + struct pic32_clk_common *core); +struct clk *pic32_refo_clk_register(const struct pic32_ref_osc_data *data, + struct pic32_clk_common *core); +struct clk *pic32_sys_clk_register(const struct pic32_sys_clk_data *data, + struct pic32_clk_common *core); +struct clk *pic32_spll_clk_register(const struct pic32_sys_pll_data *data, + struct pic32_clk_common *core); +struct clk *pic32_sosc_clk_register(const struct pic32_sec_osc_data *data, + struct pic32_clk_common *core); + +#endif /* __MICROCHIP_CLK_PIC32_H_*/ diff --git a/drivers/clk/microchip/clk-pic32mzda.c b/drivers/clk/microchip/clk-pic32mzda.c new file mode 100644 index 0000000..020a29a --- /dev/null +++ b/drivers/clk/microchip/clk-pic32mzda.c @@ -0,0 +1,275 @@ +/* + * Purna Chandra Mandal,<purna.mandal@microchip.com> + * Copyright (C) 2015 Microchip Technology Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ +#include <dt-bindings/clock/microchip,pic32-clock.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <asm/traps.h> + +#include "clk-core.h" + +/* FRC Postscaler */ +#define OSC_FRCDIV_MASK 0x07 +#define OSC_FRCDIV_SHIFT 24 + +/* SPLL fields */ +#define PLL_ICLK_MASK 0x01 +#define PLL_ICLK_SHIFT 7 + +#define DECLARE_PERIPHERAL_CLOCK(__clk_name, __reg, __flags) \ + { \ + .ctrl_reg = (__reg), \ + .init_data = { \ + .name = (__clk_name), \ + .parent_names = (const char *[]) { \ + "sys_clk" \ + }, \ + .num_parents = 1, \ + .ops = &pic32_pbclk_ops, \ + .flags = (__flags), \ + }, \ + } + +#define DECLARE_REFO_CLOCK(__clkid, __reg) \ + { \ + .ctrl_reg = (__reg), \ + .init_data = { \ + .name = "refo" #__clkid "_clk", \ + .parent_names = (const char *[]) { \ + "sys_clk", "pb1_clk", "posc_clk", \ + "frc_clk", "lprc_clk", "sosc_clk", \ + "sys_pll", "refi" #__clkid "_clk", \ + "bfrc_clk", \ + }, \ + .num_parents = 9, \ + .flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\ + .ops = &pic32_roclk_ops, \ + }, \ + .parent_map = (const u32[]) { \ + 0, 1, 2, 3, 4, 5, 7, 8, 9 \ + }, \ + } + +static const struct pic32_ref_osc_data ref_clks[] = { + DECLARE_REFO_CLOCK(1, 0x80), + DECLARE_REFO_CLOCK(2, 0xa0), + DECLARE_REFO_CLOCK(3, 0xc0), + DECLARE_REFO_CLOCK(4, 0xe0), + DECLARE_REFO_CLOCK(5, 0x100), +}; + +static const struct pic32_periph_clk_data periph_clocks[] = { + DECLARE_PERIPHERAL_CLOCK("pb1_clk", 0x140, 0), + DECLARE_PERIPHERAL_CLOCK("pb2_clk", 0x150, CLK_IGNORE_UNUSED), + DECLARE_PERIPHERAL_CLOCK("pb3_clk", 0x160, 0), + DECLARE_PERIPHERAL_CLOCK("pb4_clk", 0x170, 0), + DECLARE_PERIPHERAL_CLOCK("pb5_clk", 0x180, 0), + DECLARE_PERIPHERAL_CLOCK("pb6_clk", 0x190, 0), + DECLARE_PERIPHERAL_CLOCK("cpu_clk", 0x1a0, CLK_IGNORE_UNUSED), +}; + +static const struct pic32_sys_clk_data sys_mux_clk = { + .slew_reg = 0x1c0, + .slew_div = 2, /* step of div_4 -> div_2 -> no_div */ + .init_data = { + .name = "sys_clk", + .parent_names = (const char *[]) { + "frcdiv_clk", "sys_pll", "posc_clk", + "sosc_clk", "lprc_clk", "frcdiv_clk", + }, + .num_parents = 6, + .ops = &pic32_sclk_ops, + }, + .parent_map = (const u32[]) { + 0, 1, 2, 4, 5, 7, + }, +}; + +static const struct pic32_sys_pll_data sys_pll = { + .ctrl_reg = 0x020, + .status_reg = 0x1d0, + .lock_mask = BIT(7), + .init_data = { + .name = "sys_pll", + .parent_names = (const char *[]) { + "spll_mux_clk" + }, + .num_parents = 1, + .ops = &pic32_spll_ops, + }, +}; + +static const struct pic32_sec_osc_data sosc_clk = { + .status_reg = 0x1d0, + .enable_mask = BIT(1), + .status_mask = BIT(4), + .init_data = { + .name = "sosc_clk", + .parent_names = NULL, + .ops = &pic32_sosc_ops, + }, +}; + +static int pic32mzda_critical_clks[] = { + PB2CLK, PB7CLK +}; + +/* PIC32MZDA clock data */ +struct pic32mzda_clk_data { + struct clk *clks[MAXCLKS]; + struct pic32_clk_common core; + struct clk_onecell_data onecell_data; + struct notifier_block failsafe_notifier; +}; + +static int pic32_fscm_nmi(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct pic32mzda_clk_data *cd; + + cd = container_of(nb, struct pic32mzda_clk_data, failsafe_notifier); + + /* SYSCLK is now running from BFRCCLK. Report clock failure. */ + if (readl(cd->core.iobase) & BIT(2)) + pr_alert("pic32-clk: FSCM detected clk failure.\n"); + + /* TODO: detect reason of failure and recover accordingly */ + + return NOTIFY_OK; +} + +static int pic32mzda_clk_probe(struct platform_device *pdev) +{ + const char *const pll_mux_parents[] = {"posc_clk", "frc_clk"}; + struct device_node *np = pdev->dev.of_node; + struct pic32mzda_clk_data *cd; + struct pic32_clk_common *core; + struct clk *pll_mux_clk, *clk; + struct clk **clks; + int nr_clks, i, ret; + + cd = devm_kzalloc(&pdev->dev, sizeof(*cd), GFP_KERNEL); + if (!cd) + return -ENOMEM; + + core = &cd->core; + core->iobase = of_io_request_and_map(np, 0, of_node_full_name(np)); + if (IS_ERR(core->iobase)) { + dev_err(&pdev->dev, "pic32-clk: failed to map registers\n"); + return PTR_ERR(core->iobase); + } + + spin_lock_init(&core->reg_lock); + core->dev = &pdev->dev; + clks = &cd->clks[0]; + + /* register fixed rate clocks */ + clks[POSCCLK] = clk_register_fixed_rate(&pdev->dev, "posc_clk", NULL, + CLK_IS_ROOT, 24000000); + clks[FRCCLK] = clk_register_fixed_rate(&pdev->dev, "frc_clk", NULL, + CLK_IS_ROOT, 8000000); + clks[BFRCCLK] = clk_register_fixed_rate(&pdev->dev, "bfrc_clk", NULL, + CLK_IS_ROOT, 8000000); + clks[LPRCCLK] = clk_register_fixed_rate(&pdev->dev, "lprc_clk", NULL, + CLK_IS_ROOT, 32000); + clks[UPLLCLK] = clk_register_fixed_rate(&pdev->dev, "usbphy_clk", NULL, + CLK_IS_ROOT, 24000000); + /* fixed rate (optional) clock */ + if (of_find_property(np, "microchip,pic32mzda-sosc", NULL)) { + pr_info("pic32-clk: dt requests SOSC.\n"); + clks[SOSCCLK] = pic32_sosc_clk_register(&sosc_clk, core); + } + /* divider clock */ + clks[FRCDIVCLK] = clk_register_divider(&pdev->dev, "frcdiv_clk", + "frc_clk", 0, + core->iobase, + OSC_FRCDIV_SHIFT, + OSC_FRCDIV_MASK, + CLK_DIVIDER_POWER_OF_TWO, + &core->reg_lock); + /* PLL ICLK mux */ + pll_mux_clk = clk_register_mux(&pdev->dev, "spll_mux_clk", + pll_mux_parents, 2, 0, + core->iobase + 0x020, + PLL_ICLK_SHIFT, 1, 0, &core->reg_lock); + if (IS_ERR(pll_mux_clk)) + pr_err("spll_mux_clk: clk register failed\n"); + + /* PLL */ + clks[PLLCLK] = pic32_spll_clk_register(&sys_pll, core); + /* SYSTEM clock */ + clks[SCLK] = pic32_sys_clk_register(&sys_mux_clk, core); + /* Peripheral bus clocks */ + for (nr_clks = PB1CLK, i = 0; nr_clks <= PB7CLK; i++, nr_clks++) + clks[nr_clks] = pic32_periph_clk_register(&periph_clocks[i], + core); + /* Reference oscillator clock */ + for (nr_clks = REF1CLK, i = 0; nr_clks <= REF5CLK; i++, nr_clks++) + clks[nr_clks] = pic32_refo_clk_register(&ref_clks[i], core); + + /* register clkdev */ + for (i = 0; i < MAXCLKS; i++) { + if (IS_ERR(clks[i])) + continue; + clk_register_clkdev(clks[i], NULL, __clk_get_name(clks[i])); + } + + /* register clock provider */ + cd->onecell_data.clks = clks; + cd->onecell_data.clk_num = MAXCLKS; + ret = of_clk_add_provider(np, of_clk_src_onecell_get, + &cd->onecell_data); + if (ret) + return ret; + + /* force enable critical clocks */ + for (i = 0; i < ARRAY_SIZE(pic32mzda_critical_clks); i++) { + clk = clks[pic32mzda_critical_clks[i]]; + if (clk_prepare_enable(clk)) + dev_err(&pdev->dev, "clk_prepare_enable(%s) failed\n", + __clk_get_name(clk)); + } + + /* register NMI for failsafe clock monitor */ + cd->failsafe_notifier.notifier_call = pic32_fscm_nmi; + return register_nmi_notifier(&cd->failsafe_notifier); +} + +static const struct of_device_id pic32mzda_clk_match_table[] = { + { .compatible = "microchip,pic32mzda-clk", }, + { } +}; +MODULE_DEVICE_TABLE(of, pic32mzda_clk_match_table); + +static struct platform_driver pic32mzda_clk_driver = { + .probe = pic32mzda_clk_probe, + .driver = { + .name = "clk-pic32mzda", + .of_match_table = pic32mzda_clk_match_table, + }, +}; + +static int __init microchip_pic32mzda_clk_init(void) +{ + return platform_driver_register(&pic32mzda_clk_driver); +} +core_initcall(microchip_pic32mzda_clk_init); + +MODULE_DESCRIPTION("Microchip PIC32MZDA Clock Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:clk-pic32mzda"); diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index e1eb11e..0a9b6a09 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -102,7 +102,7 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o -obj-$(CONFIG_LOONGSON1_CPUFREQ) += ls1x-cpufreq.o +obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o diff --git a/drivers/cpufreq/ls1x-cpufreq.c b/drivers/cpufreq/loongson1-cpufreq.c index 262581b..be89416 100644 --- a/drivers/cpufreq/ls1x-cpufreq.c +++ b/drivers/cpufreq/loongson1-cpufreq.c @@ -1,7 +1,7 @@ /* * CPU Frequency Scaling for Loongson 1 SoC * - * Copyright (C) 2014 Zhang, Keguang <keguang.zhang@gmail.com> + * Copyright (C) 2014-2016 Zhang, Keguang <keguang.zhang@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -20,7 +20,7 @@ #include <cpufreq.h> #include <loongson1.h> -static struct { +struct ls1x_cpufreq { struct device *dev; struct clk *clk; /* CPU clk */ struct clk *mux_clk; /* MUX of CPU clk */ @@ -28,7 +28,9 @@ static struct { struct clk *osc_clk; /* OSC clk */ unsigned int max_freq; unsigned int min_freq; -} ls1x_cpufreq; +}; + +static struct ls1x_cpufreq *cpufreq; static int ls1x_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) @@ -46,6 +48,7 @@ static struct notifier_block ls1x_cpufreq_notifier_block = { static int ls1x_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) { + struct device *cpu_dev = get_cpu_device(policy->cpu); unsigned int old_freq, new_freq; old_freq = policy->cur; @@ -60,53 +63,49 @@ static int ls1x_cpufreq_target(struct cpufreq_policy *policy, * - Reparent CPU clk back to CPU DIV clk */ - dev_dbg(ls1x_cpufreq.dev, "%u KHz --> %u KHz\n", old_freq, new_freq); - clk_set_parent(policy->clk, ls1x_cpufreq.osc_clk); + clk_set_parent(policy->clk, cpufreq->osc_clk); __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU, LS1X_CLK_PLL_DIV); __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU), LS1X_CLK_PLL_DIV); - clk_set_rate(ls1x_cpufreq.mux_clk, new_freq * 1000); - clk_set_parent(policy->clk, ls1x_cpufreq.mux_clk); + clk_set_rate(cpufreq->mux_clk, new_freq * 1000); + clk_set_parent(policy->clk, cpufreq->mux_clk); + dev_dbg(cpu_dev, "%u KHz --> %u KHz\n", old_freq, new_freq); return 0; } static int ls1x_cpufreq_init(struct cpufreq_policy *policy) { + struct device *cpu_dev = get_cpu_device(policy->cpu); struct cpufreq_frequency_table *freq_tbl; unsigned int pll_freq, freq; int steps, i, ret; - pll_freq = clk_get_rate(ls1x_cpufreq.pll_clk) / 1000; + pll_freq = clk_get_rate(cpufreq->pll_clk) / 1000; steps = 1 << DIV_CPU_WIDTH; - freq_tbl = kzalloc(sizeof(*freq_tbl) * steps, GFP_KERNEL); - if (!freq_tbl) { - dev_err(ls1x_cpufreq.dev, - "failed to alloc cpufreq_frequency_table\n"); - ret = -ENOMEM; - goto out; - } + freq_tbl = kcalloc(steps, sizeof(*freq_tbl), GFP_KERNEL); + if (!freq_tbl) + return -ENOMEM; for (i = 0; i < (steps - 1); i++) { freq = pll_freq / (i + 1); - if ((freq < ls1x_cpufreq.min_freq) || - (freq > ls1x_cpufreq.max_freq)) + if ((freq < cpufreq->min_freq) || (freq > cpufreq->max_freq)) freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID; else freq_tbl[i].frequency = freq; - dev_dbg(ls1x_cpufreq.dev, + dev_dbg(cpu_dev, "cpufreq table: index %d: frequency %d\n", i, freq_tbl[i].frequency); } freq_tbl[i].frequency = CPUFREQ_TABLE_END; - policy->clk = ls1x_cpufreq.clk; + policy->clk = cpufreq->clk; ret = cpufreq_generic_init(policy, freq_tbl, 0); if (ret) kfree(freq_tbl); -out: + return ret; } @@ -138,85 +137,86 @@ static int ls1x_cpufreq_remove(struct platform_device *pdev) static int ls1x_cpufreq_probe(struct platform_device *pdev) { - struct plat_ls1x_cpufreq *pdata = pdev->dev.platform_data; + struct plat_ls1x_cpufreq *pdata = dev_get_platdata(&pdev->dev); struct clk *clk; int ret; - if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) + if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) { + dev_err(&pdev->dev, "platform data missing\n"); return -EINVAL; + } - ls1x_cpufreq.dev = &pdev->dev; + cpufreq = + devm_kzalloc(&pdev->dev, sizeof(struct ls1x_cpufreq), GFP_KERNEL); + if (!cpufreq) + return -ENOMEM; + + cpufreq->dev = &pdev->dev; clk = devm_clk_get(&pdev->dev, pdata->clk_name); if (IS_ERR(clk)) { - dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n", + dev_err(&pdev->dev, "unable to get %s clock\n", pdata->clk_name); - ret = PTR_ERR(clk); - goto out; + return PTR_ERR(clk); } - ls1x_cpufreq.clk = clk; + cpufreq->clk = clk; clk = clk_get_parent(clk); if (IS_ERR(clk)) { - dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n", - __clk_get_name(ls1x_cpufreq.clk)); - ret = PTR_ERR(clk); - goto out; + dev_err(&pdev->dev, "unable to get parent of %s clock\n", + __clk_get_name(cpufreq->clk)); + return PTR_ERR(clk); } - ls1x_cpufreq.mux_clk = clk; + cpufreq->mux_clk = clk; clk = clk_get_parent(clk); if (IS_ERR(clk)) { - dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n", - __clk_get_name(ls1x_cpufreq.mux_clk)); - ret = PTR_ERR(clk); - goto out; + dev_err(&pdev->dev, "unable to get parent of %s clock\n", + __clk_get_name(cpufreq->mux_clk)); + return PTR_ERR(clk); } - ls1x_cpufreq.pll_clk = clk; + cpufreq->pll_clk = clk; clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name); if (IS_ERR(clk)) { - dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n", + dev_err(&pdev->dev, "unable to get %s clock\n", pdata->osc_clk_name); - ret = PTR_ERR(clk); - goto out; + return PTR_ERR(clk); } - ls1x_cpufreq.osc_clk = clk; + cpufreq->osc_clk = clk; - ls1x_cpufreq.max_freq = pdata->max_freq; - ls1x_cpufreq.min_freq = pdata->min_freq; + cpufreq->max_freq = pdata->max_freq; + cpufreq->min_freq = pdata->min_freq; ret = cpufreq_register_driver(&ls1x_cpufreq_driver); if (ret) { - dev_err(ls1x_cpufreq.dev, - "failed to register cpufreq driver: %d\n", ret); - goto out; + dev_err(&pdev->dev, + "failed to register CPUFreq driver: %d\n", ret); + return ret; } ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); - if (!ret) - goto out; - - dev_err(ls1x_cpufreq.dev, "failed to register cpufreq notifier: %d\n", - ret); + if (ret) { + dev_err(&pdev->dev, + "failed to register CPUFreq notifier: %d\n",ret); + cpufreq_unregister_driver(&ls1x_cpufreq_driver); + } - cpufreq_unregister_driver(&ls1x_cpufreq_driver); -out: return ret; } static struct platform_driver ls1x_cpufreq_platdrv = { - .driver = { + .probe = ls1x_cpufreq_probe, + .remove = ls1x_cpufreq_remove, + .driver = { .name = "ls1x-cpufreq", }, - .probe = ls1x_cpufreq_probe, - .remove = ls1x_cpufreq_remove, }; module_platform_driver(ls1x_cpufreq_platdrv); MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>"); -MODULE_DESCRIPTION("Loongson 1 CPUFreq driver"); +MODULE_DESCRIPTION("Loongson1 CPUFreq driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig index 6bed119..3c7e5b7 100644 --- a/drivers/firmware/broadcom/Kconfig +++ b/drivers/firmware/broadcom/Kconfig @@ -9,3 +9,14 @@ config BCM47XX_NVRAM This driver provides an easy way to get value of requested parameter. It simply reads content of NVRAM and parses it. It doesn't control any hardware part itself. + +config BCM47XX_SPROM + bool "Broadcom SPROM driver" + depends on BCM47XX_NVRAM + help + Broadcom devices store configuration data in SPROM. Accessing it is + specific to the bus host type, e.g. PCI(e) devices have it mapped in + a PCI BAR. + In case of SoC devices SPROM content is stored on a flash used by + bootloader firmware CFE. This driver provides method to ssb and bcma + drivers to read SPROM on SoC. diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile index d0e6835..f93efc4 100644 --- a/drivers/firmware/broadcom/Makefile +++ b/drivers/firmware/broadcom/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o +obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o diff --git a/drivers/firmware/broadcom/bcm47xx_sprom.c b/drivers/firmware/broadcom/bcm47xx_sprom.c new file mode 100644 index 0000000..b6eb875 --- /dev/null +++ b/drivers/firmware/broadcom/bcm47xx_sprom.c @@ -0,0 +1,737 @@ +/* + * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006 Michael Buesch <m@bues.ch> + * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org> + * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/bcm47xx_nvram.h> +#include <linux/bcma/bcma.h> +#include <linux/etherdevice.h> +#include <linux/if_ether.h> +#include <linux/ssb/ssb.h> + +static void create_key(const char *prefix, const char *postfix, + const char *name, char *buf, int len) +{ + if (prefix && postfix) + snprintf(buf, len, "%s%s%s", prefix, name, postfix); + else if (prefix) + snprintf(buf, len, "%s%s", prefix, name); + else if (postfix) + snprintf(buf, len, "%s%s", name, postfix); + else + snprintf(buf, len, "%s", name); +} + +static int get_nvram_var(const char *prefix, const char *postfix, + const char *name, char *buf, int len, bool fallback) +{ + char key[40]; + int err; + + create_key(prefix, postfix, name, key, sizeof(key)); + + err = bcm47xx_nvram_getenv(key, buf, len); + if (fallback && err == -ENOENT && prefix) { + create_key(NULL, postfix, name, key, sizeof(key)); + err = bcm47xx_nvram_getenv(key, buf, len); + } + return err; +} + +#define NVRAM_READ_VAL(type) \ +static void nvram_read_ ## type(const char *prefix, \ + const char *postfix, const char *name, \ + type *val, type allset, bool fallback) \ +{ \ + char buf[100]; \ + int err; \ + type var; \ + \ + err = get_nvram_var(prefix, postfix, name, buf, sizeof(buf), \ + fallback); \ + if (err < 0) \ + return; \ + err = kstrto ## type(strim(buf), 0, &var); \ + if (err) { \ + pr_warn("can not parse nvram name %s%s%s with value %s got %i\n", \ + prefix, name, postfix, buf, err); \ + return; \ + } \ + if (allset && var == allset) \ + return; \ + *val = var; \ +} + +NVRAM_READ_VAL(u8) +NVRAM_READ_VAL(s8) +NVRAM_READ_VAL(u16) +NVRAM_READ_VAL(u32) + +#undef NVRAM_READ_VAL + +static void nvram_read_u32_2(const char *prefix, const char *name, + u16 *val_lo, u16 *val_hi, bool fallback) +{ + char buf[100]; + int err; + u32 val; + + err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); + if (err < 0) + return; + err = kstrtou32(strim(buf), 0, &val); + if (err) { + pr_warn("can not parse nvram name %s%s with value %s got %i\n", + prefix, name, buf, err); + return; + } + *val_lo = (val & 0x0000FFFFU); + *val_hi = (val & 0xFFFF0000U) >> 16; +} + +static void nvram_read_leddc(const char *prefix, const char *name, + u8 *leddc_on_time, u8 *leddc_off_time, + bool fallback) +{ + char buf[100]; + int err; + u32 val; + + err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); + if (err < 0) + return; + err = kstrtou32(strim(buf), 0, &val); + if (err) { + pr_warn("can not parse nvram name %s%s with value %s got %i\n", + prefix, name, buf, err); + return; + } + + if (val == 0xffff || val == 0xffffffff) + return; + + *leddc_on_time = val & 0xff; + *leddc_off_time = (val >> 16) & 0xff; +} + +static void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6]) +{ + if (strchr(buf, ':')) + sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], + &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], + &macaddr[5]); + else if (strchr(buf, '-')) + sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0], + &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], + &macaddr[5]); + else + pr_warn("Can not parse mac address: %s\n", buf); +} + +static void nvram_read_macaddr(const char *prefix, const char *name, + u8 val[6], bool fallback) +{ + char buf[100]; + int err; + + err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); + if (err < 0) + return; + + bcm47xx_nvram_parse_macaddr(buf, val); +} + +static void nvram_read_alpha2(const char *prefix, const char *name, + char val[2], bool fallback) +{ + char buf[10]; + int err; + + err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); + if (err < 0) + return; + if (buf[0] == '0') + return; + if (strlen(buf) > 2) { + pr_warn("alpha2 is too long %s\n", buf); + return; + } + memcpy(val, buf, 2); +} + +/* This is one-function-only macro, it uses local "sprom" variable! */ +#define ENTRY(_revmask, _type, _prefix, _name, _val, _allset, _fallback) \ + if (_revmask & BIT(sprom->revision)) \ + nvram_read_ ## _type(_prefix, NULL, _name, &sprom->_val, \ + _allset, _fallback) +/* + * Special version of filling function that can be safely called for any SPROM + * revision. For every NVRAM to SPROM mapping it contains bitmask of revisions + * for which the mapping is valid. + * It obviously requires some hexadecimal/bitmasks knowledge, but allows + * writing cleaner code (easy revisions handling). + * Note that while SPROM revision 0 was never used, we still keep BIT(0) + * reserved for it, just to keep numbering sane. + */ +static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom, + const char *prefix, bool fallback) +{ + const char *pre = prefix; + bool fb = fallback; + + /* Broadcom extracts it for rev 8+ but it was found on 2 and 4 too */ + ENTRY(0xfffffffe, u16, pre, "devid", dev_id, 0, fallback); + + ENTRY(0xfffffffe, u16, pre, "boardrev", board_rev, 0, true); + ENTRY(0xfffffffe, u32, pre, "boardflags", boardflags, 0, fb); + ENTRY(0xfffffff0, u32, pre, "boardflags2", boardflags2, 0, fb); + ENTRY(0xfffff800, u32, pre, "boardflags3", boardflags3, 0, fb); + ENTRY(0x00000002, u16, pre, "boardflags", boardflags_lo, 0, fb); + ENTRY(0xfffffffc, u16, pre, "boardtype", board_type, 0, true); + ENTRY(0xfffffffe, u16, pre, "boardnum", board_num, 0, fb); + ENTRY(0x00000002, u8, pre, "cc", country_code, 0, fb); + ENTRY(0xfffffff8, u8, pre, "regrev", regrev, 0, fb); + + ENTRY(0xfffffffe, u8, pre, "ledbh0", gpio0, 0xff, fb); + ENTRY(0xfffffffe, u8, pre, "ledbh1", gpio1, 0xff, fb); + ENTRY(0xfffffffe, u8, pre, "ledbh2", gpio2, 0xff, fb); + ENTRY(0xfffffffe, u8, pre, "ledbh3", gpio3, 0xff, fb); + + ENTRY(0x0000070e, u16, pre, "pa0b0", pa0b0, 0, fb); + ENTRY(0x0000070e, u16, pre, "pa0b1", pa0b1, 0, fb); + ENTRY(0x0000070e, u16, pre, "pa0b2", pa0b2, 0, fb); + ENTRY(0x0000070e, u8, pre, "pa0itssit", itssi_bg, 0, fb); + ENTRY(0x0000070e, u8, pre, "pa0maxpwr", maxpwr_bg, 0, fb); + + ENTRY(0x0000070c, u8, pre, "opo", opo, 0, fb); + ENTRY(0xfffffffe, u8, pre, "aa2g", ant_available_bg, 0, fb); + ENTRY(0xfffffffe, u8, pre, "aa5g", ant_available_a, 0, fb); + ENTRY(0x000007fe, s8, pre, "ag0", antenna_gain.a0, 0, fb); + ENTRY(0x000007fe, s8, pre, "ag1", antenna_gain.a1, 0, fb); + ENTRY(0x000007f0, s8, pre, "ag2", antenna_gain.a2, 0, fb); + ENTRY(0x000007f0, s8, pre, "ag3", antenna_gain.a3, 0, fb); + + ENTRY(0x0000070e, u16, pre, "pa1b0", pa1b0, 0, fb); + ENTRY(0x0000070e, u16, pre, "pa1b1", pa1b1, 0, fb); + ENTRY(0x0000070e, u16, pre, "pa1b2", pa1b2, 0, fb); + ENTRY(0x0000070c, u16, pre, "pa1lob0", pa1lob0, 0, fb); + ENTRY(0x0000070c, u16, pre, "pa1lob1", pa1lob1, 0, fb); + ENTRY(0x0000070c, u16, pre, "pa1lob2", pa1lob2, 0, fb); + ENTRY(0x0000070c, u16, pre, "pa1hib0", pa1hib0, 0, fb); + ENTRY(0x0000070c, u16, pre, "pa1hib1", pa1hib1, 0, fb); + ENTRY(0x0000070c, u16, pre, "pa1hib2", pa1hib2, 0, fb); + ENTRY(0x0000070e, u8, pre, "pa1itssit", itssi_a, 0, fb); + ENTRY(0x0000070e, u8, pre, "pa1maxpwr", maxpwr_a, 0, fb); + ENTRY(0x0000070c, u8, pre, "pa1lomaxpwr", maxpwr_al, 0, fb); + ENTRY(0x0000070c, u8, pre, "pa1himaxpwr", maxpwr_ah, 0, fb); + + ENTRY(0x00000708, u8, pre, "bxa2g", bxa2g, 0, fb); + ENTRY(0x00000708, u8, pre, "rssisav2g", rssisav2g, 0, fb); + ENTRY(0x00000708, u8, pre, "rssismc2g", rssismc2g, 0, fb); + ENTRY(0x00000708, u8, pre, "rssismf2g", rssismf2g, 0, fb); + ENTRY(0x00000708, u8, pre, "bxa5g", bxa5g, 0, fb); + ENTRY(0x00000708, u8, pre, "rssisav5g", rssisav5g, 0, fb); + ENTRY(0x00000708, u8, pre, "rssismc5g", rssismc5g, 0, fb); + ENTRY(0x00000708, u8, pre, "rssismf5g", rssismf5g, 0, fb); + ENTRY(0x00000708, u8, pre, "tri2g", tri2g, 0, fb); + ENTRY(0x00000708, u8, pre, "tri5g", tri5g, 0, fb); + ENTRY(0x00000708, u8, pre, "tri5gl", tri5gl, 0, fb); + ENTRY(0x00000708, u8, pre, "tri5gh", tri5gh, 0, fb); + ENTRY(0x00000708, s8, pre, "rxpo2g", rxpo2g, 0, fb); + ENTRY(0x00000708, s8, pre, "rxpo5g", rxpo5g, 0, fb); + ENTRY(0xfffffff0, u8, pre, "txchain", txchain, 0xf, fb); + ENTRY(0xfffffff0, u8, pre, "rxchain", rxchain, 0xf, fb); + ENTRY(0xfffffff0, u8, pre, "antswitch", antswitch, 0xff, fb); + ENTRY(0x00000700, u8, pre, "tssipos2g", fem.ghz2.tssipos, 0, fb); + ENTRY(0x00000700, u8, pre, "extpagain2g", fem.ghz2.extpa_gain, 0, fb); + ENTRY(0x00000700, u8, pre, "pdetrange2g", fem.ghz2.pdet_range, 0, fb); + ENTRY(0x00000700, u8, pre, "triso2g", fem.ghz2.tr_iso, 0, fb); + ENTRY(0x00000700, u8, pre, "antswctl2g", fem.ghz2.antswlut, 0, fb); + ENTRY(0x00000700, u8, pre, "tssipos5g", fem.ghz5.tssipos, 0, fb); + ENTRY(0x00000700, u8, pre, "extpagain5g", fem.ghz5.extpa_gain, 0, fb); + ENTRY(0x00000700, u8, pre, "pdetrange5g", fem.ghz5.pdet_range, 0, fb); + ENTRY(0x00000700, u8, pre, "triso5g", fem.ghz5.tr_iso, 0, fb); + ENTRY(0x00000700, u8, pre, "antswctl5g", fem.ghz5.antswlut, 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid2ga0", txpid2g[0], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid2ga1", txpid2g[1], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid2ga2", txpid2g[2], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid2ga3", txpid2g[3], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5ga0", txpid5g[0], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5ga1", txpid5g[1], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5ga2", txpid5g[2], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5ga3", txpid5g[3], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gla0", txpid5gl[0], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gla1", txpid5gl[1], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gla2", txpid5gl[2], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gla3", txpid5gl[3], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gha0", txpid5gh[0], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gha1", txpid5gh[1], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gha2", txpid5gh[2], 0, fb); + ENTRY(0x000000f0, u8, pre, "txpid5gha3", txpid5gh[3], 0, fb); + + ENTRY(0xffffff00, u8, pre, "tempthresh", tempthresh, 0, fb); + ENTRY(0xffffff00, u8, pre, "tempoffset", tempoffset, 0, fb); + ENTRY(0xffffff00, u16, pre, "rawtempsense", rawtempsense, 0, fb); + ENTRY(0xffffff00, u8, pre, "measpower", measpower, 0, fb); + ENTRY(0xffffff00, u8, pre, "tempsense_slope", tempsense_slope, 0, fb); + ENTRY(0xffffff00, u8, pre, "tempcorrx", tempcorrx, 0, fb); + ENTRY(0xffffff00, u8, pre, "tempsense_option", tempsense_option, 0, fb); + ENTRY(0x00000700, u8, pre, "freqoffset_corr", freqoffset_corr, 0, fb); + ENTRY(0x00000700, u8, pre, "iqcal_swp_dis", iqcal_swp_dis, 0, fb); + ENTRY(0x00000700, u8, pre, "hw_iqcal_en", hw_iqcal_en, 0, fb); + ENTRY(0x00000700, u8, pre, "elna2g", elna2g, 0, fb); + ENTRY(0x00000700, u8, pre, "elna5g", elna5g, 0, fb); + ENTRY(0xffffff00, u8, pre, "phycal_tempdelta", phycal_tempdelta, 0, fb); + ENTRY(0xffffff00, u8, pre, "temps_period", temps_period, 0, fb); + ENTRY(0xffffff00, u8, pre, "temps_hysteresis", temps_hysteresis, 0, fb); + ENTRY(0xffffff00, u8, pre, "measpower1", measpower1, 0, fb); + ENTRY(0xffffff00, u8, pre, "measpower2", measpower2, 0, fb); + + ENTRY(0x000001f0, u16, pre, "cck2gpo", cck2gpo, 0, fb); + ENTRY(0x000001f0, u32, pre, "ofdm2gpo", ofdm2gpo, 0, fb); + ENTRY(0x000001f0, u32, pre, "ofdm5gpo", ofdm5gpo, 0, fb); + ENTRY(0x000001f0, u32, pre, "ofdm5glpo", ofdm5glpo, 0, fb); + ENTRY(0x000001f0, u32, pre, "ofdm5ghpo", ofdm5ghpo, 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo0", mcs2gpo[0], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo1", mcs2gpo[1], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo2", mcs2gpo[2], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo3", mcs2gpo[3], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo4", mcs2gpo[4], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo5", mcs2gpo[5], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo6", mcs2gpo[6], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs2gpo7", mcs2gpo[7], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo0", mcs5gpo[0], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo1", mcs5gpo[1], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo2", mcs5gpo[2], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo3", mcs5gpo[3], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo4", mcs5gpo[4], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo5", mcs5gpo[5], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo6", mcs5gpo[6], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5gpo7", mcs5gpo[7], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo0", mcs5glpo[0], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo1", mcs5glpo[1], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo2", mcs5glpo[2], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo3", mcs5glpo[3], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo4", mcs5glpo[4], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo5", mcs5glpo[5], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo6", mcs5glpo[6], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5glpo7", mcs5glpo[7], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo0", mcs5ghpo[0], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo1", mcs5ghpo[1], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo2", mcs5ghpo[2], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo3", mcs5ghpo[3], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo4", mcs5ghpo[4], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo5", mcs5ghpo[5], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo6", mcs5ghpo[6], 0, fb); + ENTRY(0x000001f0, u16, pre, "mcs5ghpo7", mcs5ghpo[7], 0, fb); + ENTRY(0x000001f0, u16, pre, "cddpo", cddpo, 0, fb); + ENTRY(0x000001f0, u16, pre, "stbcpo", stbcpo, 0, fb); + ENTRY(0x000001f0, u16, pre, "bw40po", bw40po, 0, fb); + ENTRY(0x000001f0, u16, pre, "bwduppo", bwduppo, 0, fb); + + ENTRY(0xfffffe00, u16, pre, "cckbw202gpo", cckbw202gpo, 0, fb); + ENTRY(0xfffffe00, u16, pre, "cckbw20ul2gpo", cckbw20ul2gpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw202gpo", legofdmbw202gpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw20ul2gpo", legofdmbw20ul2gpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw205glpo", legofdmbw205glpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw20ul5glpo", legofdmbw20ul5glpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw205gmpo", legofdmbw205gmpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw20ul5gmpo", legofdmbw20ul5gmpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw205ghpo", legofdmbw205ghpo, 0, fb); + ENTRY(0x00000600, u32, pre, "legofdmbw20ul5ghpo", legofdmbw20ul5ghpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw202gpo", mcsbw202gpo, 0, fb); + ENTRY(0x00000600, u32, pre, "mcsbw20ul2gpo", mcsbw20ul2gpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw402gpo", mcsbw402gpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw205glpo", mcsbw205glpo, 0, fb); + ENTRY(0x00000600, u32, pre, "mcsbw20ul5glpo", mcsbw20ul5glpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw405glpo", mcsbw405glpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw205gmpo", mcsbw205gmpo, 0, fb); + ENTRY(0x00000600, u32, pre, "mcsbw20ul5gmpo", mcsbw20ul5gmpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw405gmpo", mcsbw405gmpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw205ghpo", mcsbw205ghpo, 0, fb); + ENTRY(0x00000600, u32, pre, "mcsbw20ul5ghpo", mcsbw20ul5ghpo, 0, fb); + ENTRY(0xfffffe00, u32, pre, "mcsbw405ghpo", mcsbw405ghpo, 0, fb); + ENTRY(0x00000600, u16, pre, "mcs32po", mcs32po, 0, fb); + ENTRY(0x00000600, u16, pre, "legofdm40duppo", legofdm40duppo, 0, fb); + ENTRY(0x00000700, u8, pre, "pcieingress_war", pcieingress_war, 0, fb); + + /* TODO: rev 11 support */ + ENTRY(0x00000700, u8, pre, "rxgainerr2ga0", rxgainerr2ga[0], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr2ga1", rxgainerr2ga[1], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr2ga2", rxgainerr2ga[2], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gla0", rxgainerr5gla[0], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gla1", rxgainerr5gla[1], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gla2", rxgainerr5gla[2], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gma0", rxgainerr5gma[0], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gma1", rxgainerr5gma[1], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gma2", rxgainerr5gma[2], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gha0", rxgainerr5gha[0], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gha1", rxgainerr5gha[1], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gha2", rxgainerr5gha[2], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gua0", rxgainerr5gua[0], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gua1", rxgainerr5gua[1], 0, fb); + ENTRY(0x00000700, u8, pre, "rxgainerr5gua2", rxgainerr5gua[2], 0, fb); + + ENTRY(0xfffffe00, u8, pre, "sar2g", sar2g, 0, fb); + ENTRY(0xfffffe00, u8, pre, "sar5g", sar5g, 0, fb); + + /* TODO: rev 11 support */ + ENTRY(0x00000700, u8, pre, "noiselvl2ga0", noiselvl2ga[0], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl2ga1", noiselvl2ga[1], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl2ga2", noiselvl2ga[2], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gla0", noiselvl5gla[0], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gla1", noiselvl5gla[1], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gla2", noiselvl5gla[2], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gma0", noiselvl5gma[0], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gma1", noiselvl5gma[1], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gma2", noiselvl5gma[2], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gha0", noiselvl5gha[0], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gha1", noiselvl5gha[1], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gha2", noiselvl5gha[2], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gua0", noiselvl5gua[0], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gua1", noiselvl5gua[1], 0, fb); + ENTRY(0x00000700, u8, pre, "noiselvl5gua2", noiselvl5gua[2], 0, fb); +} +#undef ENTRY /* It's specififc, uses local variable, don't use it (again). */ + +static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom, + const char *prefix, bool fallback) +{ + char postfix[2]; + int i; + + for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) { + struct ssb_sprom_core_pwr_info *pwr_info; + + pwr_info = &sprom->core_pwr_info[i]; + + snprintf(postfix, sizeof(postfix), "%i", i); + nvram_read_u8(prefix, postfix, "maxp2ga", + &pwr_info->maxpwr_2g, 0, fallback); + nvram_read_u8(prefix, postfix, "itt2ga", + &pwr_info->itssi_2g, 0, fallback); + nvram_read_u8(prefix, postfix, "itt5ga", + &pwr_info->itssi_5g, 0, fallback); + nvram_read_u16(prefix, postfix, "pa2gw0a", + &pwr_info->pa_2g[0], 0, fallback); + nvram_read_u16(prefix, postfix, "pa2gw1a", + &pwr_info->pa_2g[1], 0, fallback); + nvram_read_u16(prefix, postfix, "pa2gw2a", + &pwr_info->pa_2g[2], 0, fallback); + nvram_read_u8(prefix, postfix, "maxp5ga", + &pwr_info->maxpwr_5g, 0, fallback); + nvram_read_u8(prefix, postfix, "maxp5gha", + &pwr_info->maxpwr_5gh, 0, fallback); + nvram_read_u8(prefix, postfix, "maxp5gla", + &pwr_info->maxpwr_5gl, 0, fallback); + nvram_read_u16(prefix, postfix, "pa5gw0a", + &pwr_info->pa_5g[0], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5gw1a", + &pwr_info->pa_5g[1], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5gw2a", + &pwr_info->pa_5g[2], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5glw0a", + &pwr_info->pa_5gl[0], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5glw1a", + &pwr_info->pa_5gl[1], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5glw2a", + &pwr_info->pa_5gl[2], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5ghw0a", + &pwr_info->pa_5gh[0], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5ghw1a", + &pwr_info->pa_5gh[1], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5ghw2a", + &pwr_info->pa_5gh[2], 0, fallback); + } +} + +static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom, + const char *prefix, bool fallback) +{ + char postfix[2]; + int i; + + for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) { + struct ssb_sprom_core_pwr_info *pwr_info; + + pwr_info = &sprom->core_pwr_info[i]; + + snprintf(postfix, sizeof(postfix), "%i", i); + nvram_read_u16(prefix, postfix, "pa2gw3a", + &pwr_info->pa_2g[3], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5gw3a", + &pwr_info->pa_5g[3], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5glw3a", + &pwr_info->pa_5gl[3], 0, fallback); + nvram_read_u16(prefix, postfix, "pa5ghw3a", + &pwr_info->pa_5gh[3], 0, fallback); + } +} + +static bool bcm47xx_is_valid_mac(u8 *mac) +{ + return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c); +} + +static int bcm47xx_increase_mac_addr(u8 *mac, u8 num) +{ + u8 *oui = mac + ETH_ALEN/2 - 1; + u8 *p = mac + ETH_ALEN - 1; + + do { + (*p) += num; + if (*p > num) + break; + p--; + num = 1; + } while (p != oui); + + if (p == oui) { + pr_err("unable to fetch mac address\n"); + return -ENOENT; + } + return 0; +} + +static int mac_addr_used = 2; + +static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, + const char *prefix, bool fallback) +{ + bool fb = fallback; + + nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback); + nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0, + fallback); + nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0, + fallback); + + nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback); + nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0, + fallback); + nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0, + fallback); + + nvram_read_macaddr(prefix, "et2macaddr", sprom->et2mac, fb); + nvram_read_u8(prefix, NULL, "et2mdcport", &sprom->et2mdcport, 0, fb); + nvram_read_u8(prefix, NULL, "et2phyaddr", &sprom->et2phyaddr, 0, fb); + + nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback); + nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback); + + /* The address prefix 00:90:4C is used by Broadcom in their initial + * configuration. When a mac address with the prefix 00:90:4C is used + * all devices from the same series are sharing the same mac address. + * To prevent mac address collisions we replace them with a mac address + * based on the base address. + */ + if (!bcm47xx_is_valid_mac(sprom->il0mac)) { + u8 mac[6]; + + nvram_read_macaddr(NULL, "et0macaddr", mac, false); + if (bcm47xx_is_valid_mac(mac)) { + int err = bcm47xx_increase_mac_addr(mac, mac_addr_used); + + if (!err) { + ether_addr_copy(sprom->il0mac, mac); + mac_addr_used++; + } + } + } +} + +static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix, + bool fallback) +{ + nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo, + &sprom->boardflags_hi, fallback); + nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo, + &sprom->boardflags2_hi, fallback); +} + +void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix, + bool fallback) +{ + bcm47xx_fill_sprom_ethernet(sprom, prefix, fallback); + bcm47xx_fill_board_data(sprom, prefix, fallback); + + nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0, fallback); + + /* Entries requiring custom functions */ + nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback); + if (sprom->revision >= 3) + nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time, + &sprom->leddc_off_time, fallback); + + switch (sprom->revision) { + case 4: + case 5: + bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback); + bcm47xx_fill_sprom_path_r45(sprom, prefix, fallback); + break; + case 8: + case 9: + bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback); + break; + } + + bcm47xx_sprom_fill_auto(sprom, prefix, fallback); +} + +#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM) +static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out) +{ + char prefix[10]; + + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + bcm47xx_fill_sprom(out, NULL, false); + return 0; + case SSB_BUSTYPE_PCI: + memset(out, 0, sizeof(struct ssb_sprom)); + snprintf(prefix, sizeof(prefix), "pci/%u/%u/", + bus->host_pci->bus->number + 1, + PCI_SLOT(bus->host_pci->devfn)); + bcm47xx_fill_sprom(out, prefix, false); + return 0; + default: + pr_warn("Unable to fill SPROM for given bustype.\n"); + return -EINVAL; + } +} +#endif + +#if IS_BUILTIN(CONFIG_BCMA) +/* + * Having many NVRAM entries for PCI devices led to repeating prefixes like + * pci/1/1/ all the time and wasting flash space. So at some point Broadcom + * decided to introduce prefixes like 0: 1: 2: etc. + * If we find e.g. devpath0=pci/2/1 or devpath0=pci/2/1/ we should use 0: + * instead of pci/2/1/. + */ +static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size) +{ + size_t prefix_len = strlen(prefix); + size_t short_len = prefix_len - 1; + char nvram_var[10]; + char buf[20]; + int i; + + /* Passed prefix has to end with a slash */ + if (prefix_len <= 0 || prefix[prefix_len - 1] != '/') + return; + + for (i = 0; i < 3; i++) { + if (snprintf(nvram_var, sizeof(nvram_var), "devpath%d", i) <= 0) + continue; + if (bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf)) < 0) + continue; + if (!strcmp(buf, prefix) || + (short_len && strlen(buf) == short_len && !strncmp(buf, prefix, short_len))) { + snprintf(prefix, prefix_size, "%d:", i); + return; + } + } +} + +static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out) +{ + struct bcma_boardinfo *binfo = &bus->boardinfo; + struct bcma_device *core; + char buf[10]; + char *prefix; + bool fallback = false; + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: + memset(out, 0, sizeof(struct ssb_sprom)); + /* On BCM47XX all PCI buses share the same domain */ + if (config_enabled(CONFIG_BCM47XX)) + snprintf(buf, sizeof(buf), "pci/%u/%u/", + bus->host_pci->bus->number + 1, + PCI_SLOT(bus->host_pci->devfn)); + else + snprintf(buf, sizeof(buf), "pci/%u/%u/", + pci_domain_nr(bus->host_pci->bus) + 1, + bus->host_pci->bus->number); + bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf)); + prefix = buf; + break; + case BCMA_HOSTTYPE_SOC: + memset(out, 0, sizeof(struct ssb_sprom)); + core = bcma_find_core(bus, BCMA_CORE_80211); + if (core) { + snprintf(buf, sizeof(buf), "sb/%u/", + core->core_index); + prefix = buf; + fallback = true; + } else { + prefix = NULL; + } + break; + default: + pr_warn("Unable to fill SPROM for given bustype.\n"); + return -EINVAL; + } + + nvram_read_u16(prefix, NULL, "boardvendor", &binfo->vendor, 0, true); + if (!binfo->vendor) + binfo->vendor = SSB_BOARDVENDOR_BCM; + nvram_read_u16(prefix, NULL, "boardtype", &binfo->type, 0, true); + + bcm47xx_fill_sprom(out, prefix, fallback); + + return 0; +} +#endif + +static unsigned int bcm47xx_sprom_registered; + +/* + * On bcm47xx we need to register SPROM fallback handler very early, so we can't + * use anything like platform device / driver for this. + */ +int bcm47xx_sprom_register_fallbacks(void) +{ + if (bcm47xx_sprom_registered) + return 0; + +#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM) + if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb)) + pr_warn("Failed to register ssb SPROM handler\n"); +#endif + +#if IS_BUILTIN(CONFIG_BCMA) + if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma)) + pr_warn("Failed to register bcma SPROM handler\n"); +#endif + + bcm47xx_sprom_registered = 1; + + return 0; +} + +fs_initcall(bcm47xx_sprom_register_fallbacks); diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 4dffccf..c089f49 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -197,7 +197,7 @@ void gic_write_cpu_compare(cycle_t cnt, int cpu) local_irq_save(flags); - gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), cpu); + gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), mips_cm_vp_id(cpu)); if (mips_cm_is64) { gic_write(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE), cnt); @@ -246,6 +246,14 @@ void gic_stop_count(void) #endif +unsigned gic_read_local_vp_id(void) +{ + unsigned long ident; + + ident = gic_read(GIC_REG(VPE_LOCAL, GIC_VP_IDENT)); + return ident & GIC_VP_IDENT_VCNUM_MSK; +} + static bool gic_local_irq_is_routable(int intr) { u32 vpe_ctl; @@ -553,7 +561,8 @@ static void gic_mask_local_irq_all_vpes(struct irq_data *d) spin_lock_irqsave(&gic_lock, flags); for (i = 0; i < gic_vpes; i++) { - gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i); + gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), + mips_cm_vp_id(i)); gic_write32(GIC_REG(VPE_OTHER, GIC_VPE_RMASK), 1 << intr); } spin_unlock_irqrestore(&gic_lock, flags); @@ -567,7 +576,8 @@ static void gic_unmask_local_irq_all_vpes(struct irq_data *d) spin_lock_irqsave(&gic_lock, flags); for (i = 0; i < gic_vpes; i++) { - gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i); + gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), + mips_cm_vp_id(i)); gic_write32(GIC_REG(VPE_OTHER, GIC_VPE_SMASK), 1 << intr); } spin_unlock_irqrestore(&gic_lock, flags); @@ -607,7 +617,8 @@ static void __init gic_basic_init(void) for (i = 0; i < gic_vpes; i++) { unsigned int j; - gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i); + gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), + mips_cm_vp_id(i)); for (j = 0; j < GIC_NUM_LOCAL_INTRS; j++) { if (!gic_local_irq_is_routable(j)) continue; @@ -652,7 +663,8 @@ static int gic_local_irq_domain_map(struct irq_domain *d, unsigned int virq, for (i = 0; i < gic_vpes; i++) { u32 val = GIC_MAP_TO_PIN_MSK | gic_cpu_pin; - gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i); + gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), + mips_cm_vp_id(i)); switch (intr) { case GIC_LOCAL_INT_WD: diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig index 125e569..b3ae30a 100644 --- a/drivers/platform/mips/Kconfig +++ b/drivers/platform/mips/Kconfig @@ -15,10 +15,6 @@ menuconfig MIPS_PLATFORM_DEVICES if MIPS_PLATFORM_DEVICES -config MIPS_ACPI - bool - default y if LOONGSON_MACH3X - config CPU_HWMON tristate "Loongson CPU HWMon Driver" depends on LOONGSON_MACH3X diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile index 4341284..8dfd039 100644 --- a/drivers/platform/mips/Makefile +++ b/drivers/platform/mips/Makefile @@ -1,2 +1 @@ -obj-$(CONFIG_MIPS_ACPI) += acpi_init.o obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o diff --git a/drivers/platform/mips/acpi_init.c b/drivers/platform/mips/acpi_init.c deleted file mode 100644 index dbdad79..0000000 --- a/drivers/platform/mips/acpi_init.c +++ /dev/null @@ -1,150 +0,0 @@ -#include <linux/io.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/export.h> - -#define SBX00_ACPI_IO_BASE 0x800 -#define SBX00_ACPI_IO_SIZE 0x100 - -#define ACPI_PM_EVT_BLK (SBX00_ACPI_IO_BASE + 0x00) /* 4 bytes */ -#define ACPI_PM_CNT_BLK (SBX00_ACPI_IO_BASE + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (SBX00_ACPI_IO_BASE + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (SBX00_ACPI_IO_BASE + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (SBX00_ACPI_IO_BASE + 0x10) /* 8 bytes */ -#define ACPI_END (SBX00_ACPI_IO_BASE + 0x80) - -#define PM_INDEX 0xCD6 -#define PM_DATA 0xCD7 -#define PM2_INDEX 0xCD0 -#define PM2_DATA 0xCD1 - -/* - * SCI interrupt need acpi space, allocate here - */ - -static int __init register_acpi_resource(void) -{ - request_region(SBX00_ACPI_IO_BASE, SBX00_ACPI_IO_SIZE, "acpi"); - return 0; -} - -static void pmio_write_index(u16 index, u8 reg, u8 value) -{ - outb(reg, index); - outb(value, index + 1); -} - -static u8 pmio_read_index(u16 index, u8 reg) -{ - outb(reg, index); - return inb(index + 1); -} - -void pm_iowrite(u8 reg, u8 value) -{ - pmio_write_index(PM_INDEX, reg, value); -} -EXPORT_SYMBOL(pm_iowrite); - -u8 pm_ioread(u8 reg) -{ - return pmio_read_index(PM_INDEX, reg); -} -EXPORT_SYMBOL(pm_ioread); - -void pm2_iowrite(u8 reg, u8 value) -{ - pmio_write_index(PM2_INDEX, reg, value); -} -EXPORT_SYMBOL(pm2_iowrite); - -u8 pm2_ioread(u8 reg) -{ - return pmio_read_index(PM2_INDEX, reg); -} -EXPORT_SYMBOL(pm2_ioread); - -static void acpi_hw_clear_status(void) -{ - u16 value; - - /* PMStatus: Clear WakeStatus/PwrBtnStatus */ - value = inw(ACPI_PM_EVT_BLK); - value |= (1 << 8 | 1 << 15); - outw(value, ACPI_PM_EVT_BLK); - - /* GPEStatus: Clear all generated events */ - outl(inl(ACPI_GPE0_BLK), ACPI_GPE0_BLK); -} - -void acpi_registers_setup(void) -{ - u32 value; - - /* PM Status Base */ - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xff); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - - /* PM Control Base */ - pm_iowrite(0x22, ACPI_PM_CNT_BLK & 0xff); - pm_iowrite(0x23, ACPI_PM_CNT_BLK >> 8); - - /* GPM Base */ - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xff); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* ACPI End */ - pm_iowrite(0x2e, ACPI_END & 0xff); - pm_iowrite(0x2f, ACPI_END >> 8); - - /* IO Decode: When AcpiDecodeEnable set, South-Bridge uses the contents - * of the PM registers at index 0x20~0x2B to decode ACPI I/O address. */ - pm_iowrite(0x0e, 1 << 3); - - /* SCI_EN set */ - outw(1, ACPI_PM_CNT_BLK); - - /* Enable to generate SCI */ - pm_iowrite(0x10, pm_ioread(0x10) | 1); - - /* GPM3/GPM9 enable */ - value = inl(ACPI_GPE0_BLK + 4); - outl(value | (1 << 14) | (1 << 22), ACPI_GPE0_BLK + 4); - - /* Set GPM9 as input */ - pm_iowrite(0x8d, pm_ioread(0x8d) & (~(1 << 1))); - - /* Set GPM9 as non-output */ - pm_iowrite(0x94, pm_ioread(0x94) | (1 << 3)); - - /* GPM3 config ACPI trigger SCIOUT */ - pm_iowrite(0x33, pm_ioread(0x33) & (~(3 << 4))); - - /* GPM9 config ACPI trigger SCIOUT */ - pm_iowrite(0x3d, pm_ioread(0x3d) & (~(3 << 2))); - - /* GPM3 config falling edge trigger */ - pm_iowrite(0x37, pm_ioread(0x37) & (~(1 << 6))); - - /* No wait for STPGNT# in ACPI Sx state */ - pm_iowrite(0x7c, pm_ioread(0x7c) | (1 << 6)); - - /* Set GPM3 pull-down enable */ - value = pm2_ioread(0xf6); - value |= ((1 << 7) | (1 << 3)); - pm2_iowrite(0xf6, value); - - /* Set GPM9 pull-down enable */ - value = pm2_ioread(0xf8); - value |= ((1 << 5) | (1 << 1)); - pm2_iowrite(0xf8, value); -} - -int __init sbx00_acpi_init(void) -{ - register_acpi_resource(); - acpi_registers_setup(); - acpi_hw_clear_status(); - - return 0; -} diff --git a/drivers/platform/mips/cpu_hwmon.c b/drivers/platform/mips/cpu_hwmon.c index 4993e19..4300a55 100644 --- a/drivers/platform/mips/cpu_hwmon.c +++ b/drivers/platform/mips/cpu_hwmon.c @@ -20,9 +20,9 @@ int loongson3_cpu_temp(int cpu) u32 reg; reg = LOONGSON_CHIPTEMP(cpu); - if (loongson_sysconf.cputype == Loongson_3A) + if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) reg = (reg >> 8) & 0xff; - else if (loongson_sysconf.cputype == Loongson_3B) + else reg = ((reg >> 8) & 0xff) - 100; return (int)reg * 1000; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 13d4ed6..7711b26 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -900,6 +900,27 @@ config SERIAL_SGI_L1_CONSOLE controller serial port as your console (you want this!), say Y. Otherwise, say N. +config SERIAL_PIC32 + tristate "Microchip PIC32 serial support" + depends on MACH_PIC32 + select SERIAL_CORE + help + If you have a PIC32, this driver supports the serial ports. + + Say Y or M to use PIC32 serial ports, otherwise say N. Note that + to use a serial port as a console, this must be included in kernel and + not as a module. + +config SERIAL_PIC32_CONSOLE + bool "PIC32 serial console support" + depends on SERIAL_PIC32 + select SERIAL_CORE_CONSOLE + help + If you have a PIC32, this driver supports the putting a console on one + of the serial ports. + + Say Y to use the PIC32 console, otherwise say N. + config SERIAL_MPC52xx tristate "Freescale MPC52xx/MPC512x family PSC serial support" depends on PPC_MPC52xx || PPC_MPC512x diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 8c261ad..74914aa 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -91,6 +91,7 @@ obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o +obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c new file mode 100644 index 0000000..62a43bf --- /dev/null +++ b/drivers/tty/serial/pic32_uart.c @@ -0,0 +1,960 @@ +/* + * PIC32 Integrated Serial Driver. + * + * Copyright (C) 2015 Microchip Technology, Inc. + * + * Authors: + * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/console.h> +#include <linux/clk.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/delay.h> + +#include <asm/mach-pic32/pic32.h> +#include "pic32_uart.h" + +/* UART name and device definitions */ +#define PIC32_DEV_NAME "pic32-uart" +#define PIC32_MAX_UARTS 6 +#define PIC32_SDEV_NAME "ttyPIC" + +/* pic32_sport pointer for console use */ +static struct pic32_sport *pic32_sports[PIC32_MAX_UARTS]; + +static inline void pic32_wait_deplete_txbuf(struct pic32_sport *sport) +{ + /* wait for tx empty, otherwise chars will be lost or corrupted */ + while (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_TRMT)) + udelay(1); +} + +static inline int pic32_enable_clock(struct pic32_sport *sport) +{ + int ret = clk_prepare_enable(sport->clk); + + if (ret) + return ret; + + sport->ref_clk++; + return 0; +} + +static inline void pic32_disable_clock(struct pic32_sport *sport) +{ + sport->ref_clk--; + clk_disable_unprepare(sport->clk); +} + +/* serial core request to check if uart tx buffer is empty */ +static unsigned int pic32_uart_tx_empty(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + u32 val = pic32_uart_readl(sport, PIC32_UART_STA); + + return (val & PIC32_UART_STA_TRMT) ? 1 : 0; +} + +/* serial core request to set UART outputs */ +static void pic32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + /* set loopback mode */ + if (mctrl & TIOCM_LOOP) + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_LPBK); + else + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_LPBK); +} + +/* get the state of CTS input pin for this port */ +static unsigned int get_cts_state(struct pic32_sport *sport) +{ + /* read and invert UxCTS */ + if (gpio_is_valid(sport->cts_gpio)) + return !gpio_get_value(sport->cts_gpio); + + return 1; +} + +/* serial core request to return the state of misc UART input pins */ +static unsigned int pic32_uart_get_mctrl(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned int mctrl = 0; + + if (!sport->hw_flow_ctrl) + mctrl |= TIOCM_CTS; + else if (get_cts_state(sport)) + mctrl |= TIOCM_CTS; + + /* DSR and CD are not supported in PIC32, so return 1 + * RI is not supported in PIC32, so return 0 + */ + mctrl |= TIOCM_CD; + mctrl |= TIOCM_DSR; + + return mctrl; +} + +/* stop tx and start tx are not called in pairs, therefore a flag indicates + * the status of irq to control the irq-depth. + */ +static inline void pic32_uart_irqtxen(struct pic32_sport *sport, u8 en) +{ + if (en && !tx_irq_enabled(sport)) { + enable_irq(sport->irq_tx); + tx_irq_enabled(sport) = 1; + } else if (!en && tx_irq_enabled(sport)) { + /* use disable_irq_nosync() and not disable_irq() to avoid self + * imposed deadlock by not waiting for irq handler to end, + * since this callback is called from interrupt context. + */ + disable_irq_nosync(sport->irq_tx); + tx_irq_enabled(sport) = 0; + } +} + +/* serial core request to disable tx ASAP (used for flow control) */ +static void pic32_uart_stop_tx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) + return; + + if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) + return; + + /* wait for tx empty */ + pic32_wait_deplete_txbuf(sport); + + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXEN); + pic32_uart_irqtxen(sport, 0); +} + +/* serial core request to (re)enable tx */ +static void pic32_uart_start_tx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + pic32_uart_irqtxen(sport, 1); + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), + PIC32_UART_STA_UTXEN); +} + +/* serial core request to stop rx, called before port shutdown */ +static void pic32_uart_stop_rx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + /* disable rx interrupts */ + disable_irq(sport->irq_rx); + + /* receiver Enable bit OFF */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_URXEN); +} + +/* serial core request to start/stop emitting break char */ +static void pic32_uart_break_ctl(struct uart_port *port, int ctl) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + if (ctl) + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), + PIC32_UART_STA_UTXBRK); + else + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXBRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* get port type in string format */ +static const char *pic32_uart_type(struct uart_port *port) +{ + return (port->type == PORT_PIC32) ? PIC32_DEV_NAME : NULL; +} + +/* read all chars in rx fifo and send them to core */ +static void pic32_uart_do_rx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + struct tty_port *tty; + unsigned int max_count; + + /* limit number of char read in interrupt, should not be + * higher than fifo size anyway since we're much faster than + * serial port + */ + max_count = PIC32_UART_RX_FIFO_DEPTH; + + spin_lock(&port->lock); + + tty = &port->state->port; + + do { + u32 sta_reg, c; + char flag; + + /* get overrun/fifo empty information from status register */ + sta_reg = pic32_uart_readl(sport, PIC32_UART_STA); + if (unlikely(sta_reg & PIC32_UART_STA_OERR)) { + + /* fifo reset is required to clear interrupt */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_OERR); + + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + /* Can at least one more character can be read? */ + if (!(sta_reg & PIC32_UART_STA_URXDA)) + break; + + /* read the character and increment the rx counter */ + c = pic32_uart_readl(sport, PIC32_UART_RX); + + port->icount.rx++; + flag = TTY_NORMAL; + c &= 0xff; + + if (unlikely((sta_reg & PIC32_UART_STA_PERR) || + (sta_reg & PIC32_UART_STA_FERR))) { + + /* do stats first */ + if (sta_reg & PIC32_UART_STA_PERR) + port->icount.parity++; + if (sta_reg & PIC32_UART_STA_FERR) + port->icount.frame++; + + /* update flag wrt read_status_mask */ + sta_reg &= port->read_status_mask; + + if (sta_reg & PIC32_UART_STA_FERR) + flag = TTY_FRAME; + if (sta_reg & PIC32_UART_STA_PERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + + if ((sta_reg & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, c, flag); + + } while (--max_count); + + spin_unlock(&port->lock); + + tty_flip_buffer_push(tty); +} + +/* fill tx fifo with chars to send, stop when fifo is about to be full + * or when all chars have been sent. + */ +static void pic32_uart_do_tx(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + struct circ_buf *xmit = &port->state->xmit; + unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH; + + if (port->x_char) { + pic32_uart_writel(sport, PIC32_UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port)) { + pic32_uart_stop_tx(port); + return; + } + + if (uart_circ_empty(xmit)) + goto txq_empty; + + /* keep stuffing chars into uart tx buffer + * 1) until uart fifo is full + * or + * 2) until the circ buffer is empty + * (all chars have been sent) + * or + * 3) until the max count is reached + * (prevents lingering here for too long in certain cases) + */ + while (!(PIC32_UART_STA_UTXBF & + pic32_uart_readl(sport, PIC32_UART_STA))) { + unsigned int c = xmit->buf[xmit->tail]; + + pic32_uart_writel(sport, PIC32_UART_TX, c); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + if (--max_count == 0) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + goto txq_empty; + + return; + +txq_empty: + pic32_uart_irqtxen(sport, 0); +} + +/* RX interrupt handler */ +static irqreturn_t pic32_uart_rx_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + + pic32_uart_do_rx(port); + + return IRQ_HANDLED; +} + +/* TX interrupt handler */ +static irqreturn_t pic32_uart_tx_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + pic32_uart_do_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +/* FAULT interrupt handler */ +static irqreturn_t pic32_uart_fault_interrupt(int irq, void *dev_id) +{ + /* do nothing: pic32_uart_do_rx() handles faults. */ + return IRQ_HANDLED; +} + +/* enable rx & tx operation on uart */ +static void pic32_uart_en_and_unmask(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_STA), + PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_ON); +} + +/* disable rx & tx operation on uart */ +static void pic32_uart_dsbl_and_mask(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + /* wait for tx empty, otherwise chars will be lost or corrupted */ + pic32_wait_deplete_txbuf(sport); + + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXEN | PIC32_UART_STA_URXEN); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_ON); +} + +/* serial core request to initialize uart and start rx operation */ +static int pic32_uart_startup(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + u32 dflt_baud = (port->uartclk / PIC32_UART_DFLT_BRATE / 16) - 1; + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = pic32_enable_clock(sport); + if (ret) { + local_irq_restore(flags); + goto out_done; + } + + /* clear status and mode registers */ + pic32_uart_writel(sport, PIC32_UART_MODE, 0); + pic32_uart_writel(sport, PIC32_UART_STA, 0); + + /* disable uart and mask all interrupts */ + pic32_uart_dsbl_and_mask(port); + + /* set default baud */ + pic32_uart_writel(sport, PIC32_UART_BRG, dflt_baud); + + local_irq_restore(flags); + + /* Each UART of a PIC32 has three interrupts therefore, + * we setup driver to register the 3 irqs for the device. + * + * For each irq request_irq() is called with interrupt disabled. + * And the irq is enabled as soon as we are ready to handle them. + */ + tx_irq_enabled(sport) = 0; + + sport->irq_fault_name = kasprintf(GFP_KERNEL, "%s%d-fault", + pic32_uart_type(port), + sport->idx); + if (!sport->irq_fault_name) { + dev_err(port->dev, "%s: kasprintf err!", __func__); + ret = -ENOMEM; + goto out_done; + } + irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN); + ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt, + sport->irqflags_fault, sport->irq_fault_name, port); + if (ret) { + dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", + __func__, sport->irq_fault, ret, + pic32_uart_type(port)); + goto out_f; + } + + sport->irq_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx", + pic32_uart_type(port), + sport->idx); + if (!sport->irq_rx_name) { + dev_err(port->dev, "%s: kasprintf err!", __func__); + kfree(sport->irq_fault_name); + ret = -ENOMEM; + goto out_f; + } + irq_set_status_flags(sport->irq_rx, IRQ_NOAUTOEN); + ret = request_irq(sport->irq_rx, pic32_uart_rx_interrupt, + sport->irqflags_rx, sport->irq_rx_name, port); + if (ret) { + dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", + __func__, sport->irq_rx, ret, + pic32_uart_type(port)); + goto out_r; + } + + sport->irq_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx", + pic32_uart_type(port), + sport->idx); + if (!sport->irq_tx_name) { + dev_err(port->dev, "%s: kasprintf err!", __func__); + ret = -ENOMEM; + goto out_r; + } + irq_set_status_flags(sport->irq_tx, IRQ_NOAUTOEN); + ret = request_irq(sport->irq_tx, pic32_uart_tx_interrupt, + sport->irqflags_tx, sport->irq_tx_name, port); + if (ret) { + dev_err(port->dev, "%s: request irq(%d) err! ret:%d name:%s\n", + __func__, sport->irq_tx, ret, + pic32_uart_type(port)); + goto out_t; + } + + local_irq_save(flags); + + /* set rx interrupt on first receive */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_URXISEL1 | PIC32_UART_STA_URXISEL0); + + /* set interrupt on empty */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_STA), + PIC32_UART_STA_UTXISEL1); + + /* enable all interrupts and eanable uart */ + pic32_uart_en_and_unmask(port); + + enable_irq(sport->irq_rx); + + return 0; + +out_t: + kfree(sport->irq_tx_name); + free_irq(sport->irq_tx, sport); +out_r: + kfree(sport->irq_rx_name); + free_irq(sport->irq_rx, sport); +out_f: + kfree(sport->irq_fault_name); + free_irq(sport->irq_fault, sport); +out_done: + return ret; +} + +/* serial core request to flush & disable uart */ +static void pic32_uart_shutdown(struct uart_port *port) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned long flags; + + /* disable uart */ + spin_lock_irqsave(&port->lock, flags); + pic32_uart_dsbl_and_mask(port); + spin_unlock_irqrestore(&port->lock, flags); + pic32_disable_clock(sport); + + /* free all 3 interrupts for this UART */ + free_irq(sport->irq_fault, port); + free_irq(sport->irq_tx, port); + free_irq(sport->irq_rx, port); +} + +/* serial core request to change current uart setting */ +static void pic32_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + struct pic32_sport *sport = to_pic32_sport(port); + unsigned int baud; + unsigned int quot; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable uart and mask all interrupts while changing speed */ + pic32_uart_dsbl_and_mask(port); + + /* stop bit options */ + if (new->c_cflag & CSTOPB) + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_STSEL); + else + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_STSEL); + + /* parity options */ + if (new->c_cflag & PARENB) { + if (new->c_cflag & PARODD) { + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL1); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL0); + } else { + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL0); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL1); + } + } else { + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_PDSEL1 | + PIC32_UART_MODE_PDSEL0); + } + /* if hw flow ctrl, then the pins must be specified in device tree */ + if ((new->c_cflag & CRTSCTS) && sport->hw_flow_ctrl) { + /* enable hardware flow control */ + pic32_uart_writel(sport, PIC32_SET(PIC32_UART_MODE), + PIC32_UART_MODE_UEN1); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_UEN0); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_RTSMD); + } else { + /* disable hardware flow control */ + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_UEN1); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_UEN0); + pic32_uart_writel(sport, PIC32_CLR(PIC32_UART_MODE), + PIC32_UART_MODE_RTSMD); + } + + /* Always 8-bit */ + new->c_cflag |= CS8; + + /* Mark/Space parity is not supported */ + new->c_cflag &= ~CMSPAR; + + /* update baud */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud) - 1; + pic32_uart_writel(sport, PIC32_UART_BRG, quot); + uart_update_timeout(port, new->c_cflag, baud); + + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); + + /* enable uart */ + pic32_uart_en_and_unmask(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* serial core request to claim uart iomem */ +static int pic32_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res_mem; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res_mem)) + return -EINVAL; + + if (!request_mem_region(port->mapbase, resource_size(res_mem), + "pic32_uart_mem")) + return -EBUSY; + + port->membase = devm_ioremap_nocache(port->dev, port->mapbase, + resource_size(res_mem)); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, resource_size(res_mem)); + return -ENOMEM; + } + + return 0; +} + +/* serial core request to release uart iomem */ +static void pic32_uart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res_mem; + unsigned int res_size; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res_mem)) + return; + res_size = resource_size(res_mem); + + release_mem_region(port->mapbase, res_size); +} + +/* serial core request to do any port required auto-configuration */ +static void pic32_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + if (pic32_uart_request_port(port)) + return; + port->type = PORT_PIC32; + } +} + +/* serial core request to check that port information in serinfo are suitable */ +static int pic32_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + if (port->type != PORT_PIC32) + return -EINVAL; + if (port->irq != serinfo->irq) + return -EINVAL; + if (port->iotype != serinfo->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serinfo->iomem_base) + return -EINVAL; + + return 0; +} + +/* serial core callbacks */ +static const struct uart_ops pic32_uart_ops = { + .tx_empty = pic32_uart_tx_empty, + .get_mctrl = pic32_uart_get_mctrl, + .set_mctrl = pic32_uart_set_mctrl, + .start_tx = pic32_uart_start_tx, + .stop_tx = pic32_uart_stop_tx, + .stop_rx = pic32_uart_stop_rx, + .break_ctl = pic32_uart_break_ctl, + .startup = pic32_uart_startup, + .shutdown = pic32_uart_shutdown, + .set_termios = pic32_uart_set_termios, + .type = pic32_uart_type, + .release_port = pic32_uart_release_port, + .request_port = pic32_uart_request_port, + .config_port = pic32_uart_config_port, + .verify_port = pic32_uart_verify_port, +}; + +#ifdef CONFIG_SERIAL_PIC32_CONSOLE +/* output given char */ +static void pic32_console_putchar(struct uart_port *port, int ch) +{ + struct pic32_sport *sport = to_pic32_sport(port); + + if (!(pic32_uart_readl(sport, PIC32_UART_MODE) & PIC32_UART_MODE_ON)) + return; + + if (!(pic32_uart_readl(sport, PIC32_UART_STA) & PIC32_UART_STA_UTXEN)) + return; + + /* wait for tx empty */ + pic32_wait_deplete_txbuf(sport); + + pic32_uart_writel(sport, PIC32_UART_TX, ch & 0xff); +} + +/* console core request to output given string */ +static void pic32_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct pic32_sport *sport = pic32_sports[co->index]; + struct uart_port *port = pic32_get_port(sport); + + /* call uart helper to deal with \r\n */ + uart_console_write(port, s, count, pic32_console_putchar); +} + +/* console core request to setup given console, find matching uart + * port and setup it. + */ +static int pic32_console_setup(struct console *co, char *options) +{ + struct pic32_sport *sport; + struct uart_port *port = NULL; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret = 0; + + if (unlikely(co->index < 0 || co->index >= PIC32_MAX_UARTS)) + return -ENODEV; + + sport = pic32_sports[co->index]; + if (!sport) + return -ENODEV; + port = pic32_get_port(sport); + + ret = pic32_enable_clock(sport); + if (ret) + return ret; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver pic32_uart_driver; +static struct console pic32_console = { + .name = PIC32_SDEV_NAME, + .write = pic32_console_write, + .device = uart_console_device, + .setup = pic32_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pic32_uart_driver, +}; +#define PIC32_SCONSOLE (&pic32_console) + +static int __init pic32_console_init(void) +{ + register_console(&pic32_console); + return 0; +} +console_initcall(pic32_console_init); + +static inline bool is_pic32_console_port(struct uart_port *port) +{ + return port->cons && port->cons->index == port->line; +} + +/* + * Late console initialization. + */ +static int __init pic32_late_console_init(void) +{ + if (!(pic32_console.flags & CON_ENABLED)) + register_console(&pic32_console); + + return 0; +} + +core_initcall(pic32_late_console_init); + +#else +#define PIC32_SCONSOLE NULL +#endif + +static struct uart_driver pic32_uart_driver = { + .owner = THIS_MODULE, + .driver_name = PIC32_DEV_NAME, + .dev_name = PIC32_SDEV_NAME, + .nr = PIC32_MAX_UARTS, + .cons = PIC32_SCONSOLE, +}; + +static int pic32_uart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pic32_sport *sport; + int uart_idx = 0; + struct resource *res_mem; + struct uart_port *port; + int ret; + + uart_idx = of_alias_get_id(np, "serial"); + if (uart_idx < 0 || uart_idx >= PIC32_MAX_UARTS) + return -EINVAL; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -EINVAL; + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + sport->idx = uart_idx; + sport->irq_fault = irq_of_parse_and_map(np, 0); + sport->irqflags_fault = IRQF_NO_THREAD; + sport->irq_rx = irq_of_parse_and_map(np, 1); + sport->irqflags_rx = IRQF_NO_THREAD; + sport->irq_tx = irq_of_parse_and_map(np, 2); + sport->irqflags_tx = IRQF_NO_THREAD; + sport->clk = devm_clk_get(&pdev->dev, NULL); + sport->cts_gpio = -EINVAL; + sport->dev = &pdev->dev; + + /* Hardware flow control: gpios + * !Note: Basically, CTS is needed for reading the status. + */ + sport->hw_flow_ctrl = false; + sport->cts_gpio = of_get_named_gpio(np, "cts-gpios", 0); + if (gpio_is_valid(sport->cts_gpio)) { + sport->hw_flow_ctrl = true; + + ret = devm_gpio_request(sport->dev, + sport->cts_gpio, "CTS"); + if (ret) { + dev_err(&pdev->dev, + "error requesting CTS GPIO\n"); + goto err; + } + + ret = gpio_direction_input(sport->cts_gpio); + if (ret) { + dev_err(&pdev->dev, "error setting CTS GPIO\n"); + goto err; + } + } + + pic32_sports[uart_idx] = sport; + port = &sport->port; + memset(port, 0, sizeof(*port)); + port->iotype = UPIO_MEM; + port->mapbase = res_mem->start; + port->ops = &pic32_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + port->fifosize = PIC32_UART_TX_FIFO_DEPTH; + port->uartclk = clk_get_rate(sport->clk); + port->line = uart_idx; + + ret = uart_add_one_port(&pic32_uart_driver, port); + if (ret) { + port->membase = NULL; + dev_err(port->dev, "%s: uart add port error!\n", __func__); + goto err; + } + +#ifdef CONFIG_SERIAL_PIC32_CONSOLE + if (is_pic32_console_port(port) && + (pic32_console.flags & CON_ENABLED)) { + /* The peripheral clock has been enabled by console_setup, + * so disable it till the port is used. + */ + pic32_disable_clock(sport); + } +#endif + + platform_set_drvdata(pdev, port); + + dev_info(&pdev->dev, "%s: uart(%d) driver initialized.\n", + __func__, uart_idx); + + return 0; +err: + /* automatic unroll of sport and gpios */ + return ret; +} + +static int pic32_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct pic32_sport *sport = to_pic32_sport(port); + + uart_remove_one_port(&pic32_uart_driver, port); + pic32_disable_clock(sport); + platform_set_drvdata(pdev, NULL); + pic32_sports[sport->idx] = NULL; + + /* automatic unroll of sport and gpios */ + return 0; +} + +static const struct of_device_id pic32_serial_dt_ids[] = { + { .compatible = "microchip,pic32mzda-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids); + +static struct platform_driver pic32_uart_platform_driver = { + .probe = pic32_uart_probe, + .remove = pic32_uart_remove, + .driver = { + .name = PIC32_DEV_NAME, + .of_match_table = of_match_ptr(pic32_serial_dt_ids), + }, +}; + +static int __init pic32_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&pic32_uart_driver); + if (ret) { + pr_err("failed to register %s:%d\n", + pic32_uart_driver.driver_name, ret); + return ret; + } + + ret = platform_driver_register(&pic32_uart_platform_driver); + if (ret) { + pr_err("fail to register pic32 uart\n"); + uart_unregister_driver(&pic32_uart_driver); + } + + return ret; +} +arch_initcall(pic32_uart_init); + +static void __exit pic32_uart_exit(void) +{ +#ifdef CONFIG_SERIAL_PIC32_CONSOLE + unregister_console(&pic32_console); +#endif + platform_driver_unregister(&pic32_uart_platform_driver); + uart_unregister_driver(&pic32_uart_driver); +} +module_exit(pic32_uart_exit); + +MODULE_AUTHOR("Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>"); +MODULE_DESCRIPTION("Microchip PIC32 integrated serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/pic32_uart.h b/drivers/tty/serial/pic32_uart.h new file mode 100644 index 0000000..ec379da --- /dev/null +++ b/drivers/tty/serial/pic32_uart.h @@ -0,0 +1,126 @@ +/* + * PIC32 Integrated Serial Driver. + * + * Copyright (C) 2015 Microchip Technology, Inc. + * + * Authors: + * Sorin-Andrei Pistirica <andrei.pistirica@microchip.com> + * + * Licensed under GPLv2 or later. + */ +#ifndef __DT_PIC32_UART_H__ +#define __DT_PIC32_UART_H__ + +#define PIC32_UART_DFLT_BRATE (9600) +#define PIC32_UART_TX_FIFO_DEPTH (8) +#define PIC32_UART_RX_FIFO_DEPTH (8) + +#define PIC32_UART_MODE 0x00 +#define PIC32_UART_STA 0x10 +#define PIC32_UART_TX 0x20 +#define PIC32_UART_RX 0x30 +#define PIC32_UART_BRG 0x40 + +struct pic32_console_opt { + int baud; + int parity; + int bits; + int flow; +}; + +/* struct pic32_sport - pic32 serial port descriptor + * @port: uart port descriptor + * @idx: port index + * @irq_fault: virtual fault interrupt number + * @irqflags_fault: flags related to fault irq + * @irq_fault_name: irq fault name + * @irq_rx: virtual rx interrupt number + * @irqflags_rx: flags related to rx irq + * @irq_rx_name: irq rx name + * @irq_tx: virtual tx interrupt number + * @irqflags_tx: : flags related to tx irq + * @irq_tx_name: irq tx name + * @cts_gpio: clear to send gpio + * @dev: device descriptor + **/ +struct pic32_sport { + struct uart_port port; + struct pic32_console_opt opt; + int idx; + + int irq_fault; + int irqflags_fault; + const char *irq_fault_name; + int irq_rx; + int irqflags_rx; + const char *irq_rx_name; + int irq_tx; + int irqflags_tx; + const char *irq_tx_name; + u8 enable_tx_irq; + + bool hw_flow_ctrl; + int cts_gpio; + + int ref_clk; + struct clk *clk; + + struct device *dev; +}; +#define to_pic32_sport(c) container_of(c, struct pic32_sport, port) +#define pic32_get_port(sport) (&sport->port) +#define pic32_get_opt(sport) (&sport->opt) +#define tx_irq_enabled(sport) (sport->enable_tx_irq) + +static inline void pic32_uart_writel(struct pic32_sport *sport, + u32 reg, u32 val) +{ + struct uart_port *port = pic32_get_port(sport); + + __raw_writel(val, port->membase + reg); +} + +static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg) +{ + struct uart_port *port = pic32_get_port(sport); + + return __raw_readl(port->membase + reg); +} + +/* pic32 uart mode register bits */ +#define PIC32_UART_MODE_ON BIT(15) +#define PIC32_UART_MODE_FRZ BIT(14) +#define PIC32_UART_MODE_SIDL BIT(13) +#define PIC32_UART_MODE_IREN BIT(12) +#define PIC32_UART_MODE_RTSMD BIT(11) +#define PIC32_UART_MODE_RESV1 BIT(10) +#define PIC32_UART_MODE_UEN1 BIT(9) +#define PIC32_UART_MODE_UEN0 BIT(8) +#define PIC32_UART_MODE_WAKE BIT(7) +#define PIC32_UART_MODE_LPBK BIT(6) +#define PIC32_UART_MODE_ABAUD BIT(5) +#define PIC32_UART_MODE_RXINV BIT(4) +#define PIC32_UART_MODE_BRGH BIT(3) +#define PIC32_UART_MODE_PDSEL1 BIT(2) +#define PIC32_UART_MODE_PDSEL0 BIT(1) +#define PIC32_UART_MODE_STSEL BIT(0) + +/* pic32 uart status register bits */ +#define PIC32_UART_STA_UTXISEL1 BIT(15) +#define PIC32_UART_STA_UTXISEL0 BIT(14) +#define PIC32_UART_STA_UTXINV BIT(13) +#define PIC32_UART_STA_URXEN BIT(12) +#define PIC32_UART_STA_UTXBRK BIT(11) +#define PIC32_UART_STA_UTXEN BIT(10) +#define PIC32_UART_STA_UTXBF BIT(9) +#define PIC32_UART_STA_TRMT BIT(8) +#define PIC32_UART_STA_URXISEL1 BIT(7) +#define PIC32_UART_STA_URXISEL0 BIT(6) +#define PIC32_UART_STA_ADDEN BIT(5) +#define PIC32_UART_STA_RIDLE BIT(4) +#define PIC32_UART_STA_PERR BIT(3) +#define PIC32_UART_STA_FERR BIT(2) +#define PIC32_UART_STA_OERR BIT(1) +#define PIC32_UART_STA_URXDA BIT(0) + +#endif /* __DT_PIC32_UART_H__ */ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 04dcedf..0449235 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1245,11 +1245,6 @@ MODULE_LICENSE ("GPL"); #define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver #endif -#ifdef CONFIG_MACH_JZ4740 -#include "ohci-jz4740.c" -#define PLATFORM_DRIVER ohci_hcd_jz4740_driver -#endif - #ifdef CONFIG_TILE_USB #include "ohci-tilegx.c" #define PLATFORM_DRIVER ohci_hcd_tilegx_driver diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c deleted file mode 100644 index 4db78f1..0000000 --- a/drivers/usb/host/ohci-jz4740.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/regulator/consumer.h> - -struct jz4740_ohci_hcd { - struct ohci_hcd ohci_hcd; - - struct regulator *vbus; - bool vbus_enabled; - struct clk *clk; -}; - -static inline struct jz4740_ohci_hcd *hcd_to_jz4740_hcd(struct usb_hcd *hcd) -{ - return (struct jz4740_ohci_hcd *)(hcd->hcd_priv); -} - -static inline struct usb_hcd *jz4740_hcd_to_hcd(struct jz4740_ohci_hcd *jz4740_ohci) -{ - return container_of((void *)jz4740_ohci, struct usb_hcd, hcd_priv); -} - -static int ohci_jz4740_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - ohci->num_ports = 1; - - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "Can not start %s", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - return 0; -} - -static int ohci_jz4740_set_vbus_power(struct jz4740_ohci_hcd *jz4740_ohci, - bool enabled) -{ - int ret = 0; - - if (!jz4740_ohci->vbus) - return 0; - - if (enabled && !jz4740_ohci->vbus_enabled) { - ret = regulator_enable(jz4740_ohci->vbus); - if (ret) - dev_err(jz4740_hcd_to_hcd(jz4740_ohci)->self.controller, - "Could not power vbus\n"); - } else if (!enabled && jz4740_ohci->vbus_enabled) { - ret = regulator_disable(jz4740_ohci->vbus); - } - - if (ret == 0) - jz4740_ohci->vbus_enabled = enabled; - - return ret; -} - -static int ohci_jz4740_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - u16 wIndex, char *buf, u16 wLength) -{ - struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd); - int ret = 0; - - switch (typeReq) { - case SetPortFeature: - if (wValue == USB_PORT_FEAT_POWER) - ret = ohci_jz4740_set_vbus_power(jz4740_ohci, true); - break; - case ClearPortFeature: - if (wValue == USB_PORT_FEAT_POWER) - ret = ohci_jz4740_set_vbus_power(jz4740_ohci, false); - break; - } - - if (ret) - return ret; - - return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); -} - - -static const struct hc_driver ohci_jz4740_hc_driver = { - .description = hcd_name, - .product_desc = "JZ4740 OHCI", - .hcd_priv_size = sizeof(struct jz4740_ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_jz4740_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_jz4740_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - - -static int jz4740_ohci_probe(struct platform_device *pdev) -{ - int ret; - struct usb_hcd *hcd; - struct jz4740_ohci_hcd *jz4740_ohci; - struct resource *res; - int irq; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "Failed to get platform irq\n"); - return irq; - } - - hcd = usb_create_hcd(&ohci_jz4740_hc_driver, &pdev->dev, "jz4740"); - if (!hcd) { - dev_err(&pdev->dev, "Failed to create hcd.\n"); - return -ENOMEM; - } - - jz4740_ohci = hcd_to_jz4740_hcd(hcd); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); - goto err_free; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - jz4740_ohci->clk = devm_clk_get(&pdev->dev, "uhc"); - if (IS_ERR(jz4740_ohci->clk)) { - ret = PTR_ERR(jz4740_ohci->clk); - dev_err(&pdev->dev, "Failed to get clock: %d\n", ret); - goto err_free; - } - - jz4740_ohci->vbus = devm_regulator_get(&pdev->dev, "vbus"); - if (IS_ERR(jz4740_ohci->vbus)) - jz4740_ohci->vbus = NULL; - - - clk_set_rate(jz4740_ohci->clk, 48000000); - clk_enable(jz4740_ohci->clk); - if (jz4740_ohci->vbus) - ohci_jz4740_set_vbus_power(jz4740_ohci, true); - - platform_set_drvdata(pdev, hcd); - - ohci_hcd_init(hcd_to_ohci(hcd)); - - ret = usb_add_hcd(hcd, irq, 0); - if (ret) { - dev_err(&pdev->dev, "Failed to add hcd: %d\n", ret); - goto err_disable; - } - device_wakeup_enable(hcd->self.controller); - - return 0; - -err_disable: - if (jz4740_ohci->vbus) - regulator_disable(jz4740_ohci->vbus); - clk_disable(jz4740_ohci->clk); - -err_free: - usb_put_hcd(hcd); - - return ret; -} - -static int jz4740_ohci_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd); - - usb_remove_hcd(hcd); - - if (jz4740_ohci->vbus) - regulator_disable(jz4740_ohci->vbus); - - clk_disable(jz4740_ohci->clk); - - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ohci_hcd_jz4740_driver = { - .probe = jz4740_ohci_probe, - .remove = jz4740_ohci_remove, - .driver = { - .name = "jz4740-ohci", - }, -}; - -MODULE_ALIAS("platform:jz4740-ohci"); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index fb94765..9c41431 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1475,6 +1475,32 @@ config MT7621_WDT help Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer. +config PIC32_WDT + tristate "Microchip PIC32 hardware watchdog" + select WATCHDOG_CORE + depends on MACH_PIC32 + help + Watchdog driver for the built in watchdog hardware in a PIC32. + + Configuration bits must be set appropriately for the watchdog to be + controlled by this driver. + + To compile this driver as a loadable module, choose M here. + The module will be called pic32-wdt. + +config PIC32_DMT + tristate "Microchip PIC32 Deadman Timer" + select WATCHDOG_CORE + depends on MACH_PIC32 + help + Watchdog driver for PIC32 instruction fetch counting timer. This specific + timer is typically be used in misson critical and safety critical + applications, where any single failure of the software functionality + and sequencing must be detected. + + To compile this driver as a loadable module, choose M here. + The module will be called pic32-dmt. + # PARISC Architecture # POWERPC Architecture diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index feb6270..9bde095 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -157,6 +157,8 @@ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o +obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o +obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o # PARISC Architecture diff --git a/drivers/watchdog/pic32-dmt.c b/drivers/watchdog/pic32-dmt.c new file mode 100644 index 0000000..962f58c --- /dev/null +++ b/drivers/watchdog/pic32-dmt.c @@ -0,0 +1,257 @@ +/* + * PIC32 deadman timer driver + * + * Purna Chandra Mandal <purna.mandal@microchip.com> + * Copyright (c) 2016, Microchip Technology Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/watchdog.h> + +#include <asm/mach-pic32/pic32.h> + +/* Deadman Timer Regs */ +#define DMTCON_REG 0x00 +#define DMTPRECLR_REG 0x10 +#define DMTCLR_REG 0x20 +#define DMTSTAT_REG 0x30 +#define DMTCNT_REG 0x40 +#define DMTPSCNT_REG 0x60 +#define DMTPSINTV_REG 0x70 + +/* Deadman Timer Regs fields */ +#define DMT_ON BIT(15) +#define DMT_STEP1_KEY BIT(6) +#define DMT_STEP2_KEY BIT(3) +#define DMTSTAT_WINOPN BIT(0) +#define DMTSTAT_EVENT BIT(5) +#define DMTSTAT_BAD2 BIT(6) +#define DMTSTAT_BAD1 BIT(7) + +/* Reset Control Register fields for watchdog */ +#define RESETCON_DMT_TIMEOUT BIT(5) + +struct pic32_dmt { + void __iomem *regs; + struct clk *clk; +}; + +static inline void dmt_enable(struct pic32_dmt *dmt) +{ + writel(DMT_ON, PIC32_SET(dmt->regs + DMTCON_REG)); +} + +static inline void dmt_disable(struct pic32_dmt *dmt) +{ + writel(DMT_ON, PIC32_CLR(dmt->regs + DMTCON_REG)); + /* + * Cannot touch registers in the CPU cycle following clearing the + * ON bit. + */ + nop(); +} + +static inline int dmt_bad_status(struct pic32_dmt *dmt) +{ + u32 val; + + val = readl(dmt->regs + DMTSTAT_REG); + val &= (DMTSTAT_BAD1 | DMTSTAT_BAD2 | DMTSTAT_EVENT); + if (val) + return -EAGAIN; + + return 0; +} + +static inline int dmt_keepalive(struct pic32_dmt *dmt) +{ + u32 v; + u32 timeout = 500; + + /* set pre-clear key */ + writel(DMT_STEP1_KEY << 8, dmt->regs + DMTPRECLR_REG); + + /* wait for DMT window to open */ + while (--timeout) { + v = readl(dmt->regs + DMTSTAT_REG) & DMTSTAT_WINOPN; + if (v == DMTSTAT_WINOPN) + break; + } + + /* apply key2 */ + writel(DMT_STEP2_KEY, dmt->regs + DMTCLR_REG); + + /* check whether keys are latched correctly */ + return dmt_bad_status(dmt); +} + +static inline u32 pic32_dmt_get_timeout_secs(struct pic32_dmt *dmt) +{ + unsigned long rate; + + rate = clk_get_rate(dmt->clk); + if (rate) + return readl(dmt->regs + DMTPSCNT_REG) / rate; + + return 0; +} + +static inline u32 pic32_dmt_bootstatus(struct pic32_dmt *dmt) +{ + u32 v; + void __iomem *rst_base; + + rst_base = ioremap(PIC32_BASE_RESET, 0x10); + if (!rst_base) + return 0; + + v = readl(rst_base); + + writel(RESETCON_DMT_TIMEOUT, PIC32_CLR(rst_base)); + + iounmap(rst_base); + return v & RESETCON_DMT_TIMEOUT; +} + +static int pic32_dmt_start(struct watchdog_device *wdd) +{ + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + dmt_enable(dmt); + return dmt_keepalive(dmt); +} + +static int pic32_dmt_stop(struct watchdog_device *wdd) +{ + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + dmt_disable(dmt); + + return 0; +} + +static int pic32_dmt_ping(struct watchdog_device *wdd) +{ + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + return dmt_keepalive(dmt); +} + +static const struct watchdog_ops pic32_dmt_fops = { + .owner = THIS_MODULE, + .start = pic32_dmt_start, + .stop = pic32_dmt_stop, + .ping = pic32_dmt_ping, +}; + +static const struct watchdog_info pic32_dmt_ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .identity = "PIC32 Deadman Timer", +}; + +static struct watchdog_device pic32_dmt_wdd = { + .info = &pic32_dmt_ident, + .ops = &pic32_dmt_fops, +}; + +static int pic32_dmt_probe(struct platform_device *pdev) +{ + int ret; + struct pic32_dmt *dmt; + struct resource *mem; + struct watchdog_device *wdd = &pic32_dmt_wdd; + + dmt = devm_kzalloc(&pdev->dev, sizeof(*dmt), GFP_KERNEL); + if (IS_ERR(dmt)) + return PTR_ERR(dmt); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dmt->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(dmt->regs)) + return PTR_ERR(dmt->regs); + + dmt->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(dmt->clk)) { + dev_err(&pdev->dev, "clk not found\n"); + return PTR_ERR(dmt->clk); + } + + ret = clk_prepare_enable(dmt->clk); + if (ret) + return ret; + + wdd->timeout = pic32_dmt_get_timeout_secs(dmt); + if (!wdd->timeout) { + dev_err(&pdev->dev, + "failed to read watchdog register timeout\n"); + ret = -EINVAL; + goto out_disable_clk; + } + + dev_info(&pdev->dev, "timeout %d\n", wdd->timeout); + + wdd->bootstatus = pic32_dmt_bootstatus(dmt) ? WDIOF_CARDRESET : 0; + + watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT); + watchdog_set_drvdata(wdd, dmt); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, "watchdog register failed, err %d\n", ret); + goto out_disable_clk; + } + + platform_set_drvdata(pdev, wdd); + return 0; + +out_disable_clk: + clk_disable_unprepare(dmt->clk); + return ret; +} + +static int pic32_dmt_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + struct pic32_dmt *dmt = watchdog_get_drvdata(wdd); + + watchdog_unregister_device(wdd); + clk_disable_unprepare(dmt->clk); + + return 0; +} + +static const struct of_device_id pic32_dmt_of_ids[] = { + { .compatible = "microchip,pic32mzda-dmt",}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pic32_dmt_of_ids); + +static struct platform_driver pic32_dmt_driver = { + .probe = pic32_dmt_probe, + .remove = pic32_dmt_remove, + .driver = { + .name = "pic32-dmt", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pic32_dmt_of_ids), + } +}; + +module_platform_driver(pic32_dmt_driver); + +MODULE_AUTHOR("Purna Chandra Mandal <purna.mandal@microchip.com>"); +MODULE_DESCRIPTION("Microchip PIC32 DMT Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/pic32-wdt.c b/drivers/watchdog/pic32-wdt.c new file mode 100644 index 0000000..6047aa8 --- /dev/null +++ b/drivers/watchdog/pic32-wdt.c @@ -0,0 +1,263 @@ +/* + * PIC32 watchdog driver + * + * Joshua Henderson <joshua.henderson@microchip.com> + * Copyright (c) 2016, Microchip Technology Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/watchdog.h> + +#include <asm/mach-pic32/pic32.h> + +/* Watchdog Timer Registers */ +#define WDTCON_REG 0x00 + +/* Watchdog Timer Control Register fields */ +#define WDTCON_WIN_EN BIT(0) +#define WDTCON_RMCS_MASK 0x0003 +#define WDTCON_RMCS_SHIFT 0x0006 +#define WDTCON_RMPS_MASK 0x001F +#define WDTCON_RMPS_SHIFT 0x0008 +#define WDTCON_ON BIT(15) +#define WDTCON_CLR_KEY 0x5743 + +/* Reset Control Register fields for watchdog */ +#define RESETCON_TIMEOUT_IDLE BIT(2) +#define RESETCON_TIMEOUT_SLEEP BIT(3) +#define RESETCON_WDT_TIMEOUT BIT(4) + +struct pic32_wdt { + void __iomem *regs; + void __iomem *rst_base; + struct clk *clk; +}; + +static inline bool pic32_wdt_is_win_enabled(struct pic32_wdt *wdt) +{ + return !!(readl(wdt->regs + WDTCON_REG) & WDTCON_WIN_EN); +} + +static inline u32 pic32_wdt_get_post_scaler(struct pic32_wdt *wdt) +{ + u32 v = readl(wdt->regs + WDTCON_REG); + + return (v >> WDTCON_RMPS_SHIFT) & WDTCON_RMPS_MASK; +} + +static inline u32 pic32_wdt_get_clk_id(struct pic32_wdt *wdt) +{ + u32 v = readl(wdt->regs + WDTCON_REG); + + return (v >> WDTCON_RMCS_SHIFT) & WDTCON_RMCS_MASK; +} + +static int pic32_wdt_bootstatus(struct pic32_wdt *wdt) +{ + u32 v = readl(wdt->rst_base); + + writel(RESETCON_WDT_TIMEOUT, PIC32_CLR(wdt->rst_base)); + + return v & RESETCON_WDT_TIMEOUT; +} + +static u32 pic32_wdt_get_timeout_secs(struct pic32_wdt *wdt, struct device *dev) +{ + unsigned long rate; + u32 period, ps, terminal; + + rate = clk_get_rate(wdt->clk); + + dev_dbg(dev, "wdt: clk_id %d, clk_rate %lu (prescale)\n", + pic32_wdt_get_clk_id(wdt), rate); + + /* default, prescaler of 32 (i.e. div-by-32) is implicit. */ + rate >>= 5; + if (!rate) + return 0; + + /* calculate terminal count from postscaler. */ + ps = pic32_wdt_get_post_scaler(wdt); + terminal = BIT(ps); + + /* find time taken (in secs) to reach terminal count */ + period = terminal / rate; + dev_dbg(dev, + "wdt: clk_rate %lu (postscale) / terminal %d, timeout %dsec\n", + rate, terminal, period); + + return period; +} + +static void pic32_wdt_keepalive(struct pic32_wdt *wdt) +{ + /* write key through single half-word */ + writew(WDTCON_CLR_KEY, wdt->regs + WDTCON_REG + 2); +} + +static int pic32_wdt_start(struct watchdog_device *wdd) +{ + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + writel(WDTCON_ON, PIC32_SET(wdt->regs + WDTCON_REG)); + pic32_wdt_keepalive(wdt); + + return 0; +} + +static int pic32_wdt_stop(struct watchdog_device *wdd) +{ + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + writel(WDTCON_ON, PIC32_CLR(wdt->regs + WDTCON_REG)); + + /* + * Cannot touch registers in the CPU cycle following clearing the + * ON bit. + */ + nop(); + + return 0; +} + +static int pic32_wdt_ping(struct watchdog_device *wdd) +{ + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + pic32_wdt_keepalive(wdt); + + return 0; +} + +static const struct watchdog_ops pic32_wdt_fops = { + .owner = THIS_MODULE, + .start = pic32_wdt_start, + .stop = pic32_wdt_stop, + .ping = pic32_wdt_ping, +}; + +static const struct watchdog_info pic32_wdt_ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | WDIOF_CARDRESET, + .identity = "PIC32 Watchdog", +}; + +static struct watchdog_device pic32_wdd = { + .info = &pic32_wdt_ident, + .ops = &pic32_wdt_fops, +}; + +static const struct of_device_id pic32_wdt_dt_ids[] = { + { .compatible = "microchip,pic32mzda-wdt", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, pic32_wdt_dt_ids); + +static int pic32_wdt_drv_probe(struct platform_device *pdev) +{ + int ret; + struct watchdog_device *wdd = &pic32_wdd; + struct pic32_wdt *wdt; + struct resource *mem; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (IS_ERR(wdt)) + return PTR_ERR(wdt); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(wdt->regs)) + return PTR_ERR(wdt->regs); + + wdt->rst_base = devm_ioremap(&pdev->dev, PIC32_BASE_RESET, 0x10); + if (IS_ERR(wdt->rst_base)) + return PTR_ERR(wdt->rst_base); + + wdt->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt->clk)) { + dev_err(&pdev->dev, "clk not found\n"); + return PTR_ERR(wdt->clk); + } + + ret = clk_prepare_enable(wdt->clk); + if (ret) { + dev_err(&pdev->dev, "clk enable failed\n"); + return ret; + } + + if (pic32_wdt_is_win_enabled(wdt)) { + dev_err(&pdev->dev, "windowed-clear mode is not supported.\n"); + ret = -ENODEV; + goto out_disable_clk; + } + + wdd->timeout = pic32_wdt_get_timeout_secs(wdt, &pdev->dev); + if (!wdd->timeout) { + dev_err(&pdev->dev, + "failed to read watchdog register timeout\n"); + ret = -EINVAL; + goto out_disable_clk; + } + + dev_info(&pdev->dev, "timeout %d\n", wdd->timeout); + + wdd->bootstatus = pic32_wdt_bootstatus(wdt) ? WDIOF_CARDRESET : 0; + + watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT); + watchdog_set_drvdata(wdd, wdt); + + ret = watchdog_register_device(wdd); + if (ret) { + dev_err(&pdev->dev, "watchdog register failed, err %d\n", ret); + goto out_disable_clk; + } + + platform_set_drvdata(pdev, wdd); + + return 0; + +out_disable_clk: + clk_disable_unprepare(wdt->clk); + + return ret; +} + +static int pic32_wdt_drv_remove(struct platform_device *pdev) +{ + struct watchdog_device *wdd = platform_get_drvdata(pdev); + struct pic32_wdt *wdt = watchdog_get_drvdata(wdd); + + watchdog_unregister_device(wdd); + clk_disable_unprepare(wdt->clk); + + return 0; +} + +static struct platform_driver pic32_wdt_driver = { + .probe = pic32_wdt_drv_probe, + .remove = pic32_wdt_drv_remove, + .driver = { + .name = "pic32-wdt", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pic32_wdt_dt_ids), + } +}; + +module_platform_driver(pic32_wdt_driver); + +MODULE_AUTHOR("Joshua Henderson <joshua.henderson@microchip.com>"); +MODULE_DESCRIPTION("Microchip PIC32 Watchdog Timer"); +MODULE_LICENSE("GPL"); |