diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 40 |
1 files changed, 37 insertions, 3 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index f8a60ca..ebd6e44 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -138,17 +138,51 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) **/ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) { + u32 i; + u16 ctrl = 0; + s32 status = 0; + + if (hw->phy.type == ixgbe_phy_unknown) + status = ixgbe_identify_phy_generic(hw); + + if (status != 0 || hw->phy.type == ixgbe_phy_none) + goto out; + /* Don't reset PHY if it's shut down due to overtemp. */ if (!hw->phy.reset_if_overtemp && (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) - return 0; + goto out; /* * Perform soft PHY reset to the PHY_XS. * This will cause a soft reset to the PHY */ - return hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, - MDIO_CTRL1_RESET); + hw->phy.ops.write_reg(hw, MDIO_CTRL1, + MDIO_MMD_PHYXS, + MDIO_CTRL1_RESET); + + /* + * Poll for reset bit to self-clear indicating reset is complete. + * Some PHYs could take up to 3 seconds to complete and need about + * 1.7 usec delay after the reset is complete. + */ + for (i = 0; i < 30; i++) { + msleep(100); + hw->phy.ops.read_reg(hw, MDIO_CTRL1, + MDIO_MMD_PHYXS, &ctrl); + if (!(ctrl & MDIO_CTRL1_RESET)) { + udelay(2); + break; + } + } + + if (ctrl & MDIO_CTRL1_RESET) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "PHY reset polling failed to complete.\n"); + } + +out: + return status; } /** |