diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/igb/e1000_82575.c | 208 | ||||
-rw-r--r-- | drivers/net/igb/e1000_82575.h | 9 | ||||
-rw-r--r-- | drivers/net/igb/e1000_defines.h | 10 | ||||
-rw-r--r-- | drivers/net/igb/e1000_hw.h | 8 | ||||
-rw-r--r-- | drivers/net/igb/e1000_mac.c | 3 | ||||
-rw-r--r-- | drivers/net/igb/e1000_mac.h | 1 | ||||
-rw-r--r-- | drivers/net/igb/e1000_regs.h | 7 | ||||
-rw-r--r-- | drivers/net/igb/igb_ethtool.c | 146 | ||||
-rw-r--r-- | drivers/net/igb/igb_main.c | 170 |
9 files changed, 476 insertions, 86 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 2c8b910..e098f23 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -31,6 +31,7 @@ #include <linux/types.h> #include <linux/slab.h> +#include <linux/if_ether.h> #include "e1000_mac.h" #include "e1000_82575.h" @@ -45,7 +46,6 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *); static s32 igb_init_hw_82575(struct e1000_hw *); static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *); static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *); -static void igb_rar_set_82575(struct e1000_hw *, u8 *, u32); static s32 igb_reset_hw_82575(struct e1000_hw *); static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool); static s32 igb_setup_copper_link_82575(struct e1000_hw *); @@ -84,6 +84,12 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_82575GB_QUAD_COPPER: mac->type = e1000_82575; break; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + mac->type = e1000_82576; + break; default: return -E1000_ERR_MAC_INIT; break; @@ -128,6 +134,8 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->mta_reg_count = 128; /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + if (mac->type == e1000_82576) + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; /* Set if part includes ASF firmware */ mac->asf_firmware_present = true; /* Set if manageability features are enabled. */ @@ -694,13 +702,12 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) if ((hw->phy.media_type != e1000_media_type_copper) || (igb_sgmii_active_82575(hw))) ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, - &duplex); + &duplex); else ret_val = igb_check_for_copper_link(hw); return ret_val; } - /** * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex * @hw: pointer to the HW structure @@ -757,18 +764,129 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, } /** - * igb_rar_set_82575 - Set receive address register + * igb_init_rx_addrs_82575 - Initialize receive address's + * @hw: pointer to the HW structure + * @rar_count: receive address registers + * + * Setups the receive address registers by setting the base receive address + * register to the devices MAC address and clearing all the other receive + * address registers to 0. + **/ +static void igb_init_rx_addrs_82575(struct e1000_hw *hw, u16 rar_count) +{ + u32 i; + u8 addr[6] = {0,0,0,0,0,0}; + /* + * This function is essentially the same as that of + * e1000_init_rx_addrs_generic. However it also takes care + * of the special case where the register offset of the + * second set of RARs begins elsewhere. This is implicitly taken care by + * function e1000_rar_set_generic. + */ + + hw_dbg("e1000_init_rx_addrs_82575"); + + /* Setup the receive address */ + hw_dbg("Programming MAC Address into RAR[0]\n"); + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + /* Zero out the other (rar_entry_count - 1) receive addresses */ + hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); + for (i = 1; i < rar_count; i++) + hw->mac.ops.rar_set(hw, addr, i); +} + +/** + * igb_update_mc_addr_list_82575 - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @rar_used_count: the first RAR register free to program + * @rar_count: total number of supported Receive Address Registers + * + * Updates the Receive Address Registers and Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + * The parameter rar_count will usually be hw->mac.rar_entry_count + * unless there are workarounds that change this. + **/ +void igb_update_mc_addr_list_82575(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 rar_used_count, u32 rar_count) +{ + u32 hash_value; + u32 i; + u8 addr[6] = {0,0,0,0,0,0}; + /* + * This function is essentially the same as that of + * igb_update_mc_addr_list_generic. However it also takes care + * of the special case where the register offset of the + * second set of RARs begins elsewhere. This is implicitly taken care by + * function e1000_rar_set_generic. + */ + + /* + * Load the first set of multicast addresses into the exact + * filters (RAR). If there are not enough to fill the RAR + * array, clear the filters. + */ + for (i = rar_used_count; i < rar_count; i++) { + if (mc_addr_count) { + igb_rar_set(hw, mc_addr_list, i); + mc_addr_count--; + mc_addr_list += ETH_ALEN; + } else { + igb_rar_set(hw, addr, i); + } + } + + /* Clear the old settings from the MTA */ + hw_dbg("Clearing MTA\n"); + for (i = 0; i < hw->mac.mta_reg_count; i++) { + array_wr32(E1000_MTA, i, 0); + wrfl(); + } + + /* Load any remaining multicast addresses into the hash table. */ + for (; mc_addr_count > 0; mc_addr_count--) { + hash_value = igb_hash_mc_addr(hw, mc_addr_list); + hw_dbg("Hash value = 0x%03X\n", hash_value); + hw->mac.ops.mta_set(hw, hash_value); + mc_addr_list += ETH_ALEN; + } +} + +/** + * igb_shutdown_fiber_serdes_link_82575 - Remove link during power down * @hw: pointer to the HW structure - * @addr: pointer to the receive address - * @index: receive address array register * - * Sets the receive address array register at index to the address passed - * in by addr. + * In the case of fiber serdes, shut down optics and PCS on driver unload + * when management pass thru is not enabled. **/ -static void igb_rar_set_82575(struct e1000_hw *hw, u8 *addr, u32 index) +void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw) { - if (index < E1000_RAR_ENTRIES_82575) - igb_rar_set(hw, addr, index); + u32 reg; + + if (hw->mac.type != e1000_82576 || + (hw->phy.media_type != e1000_media_type_fiber && + hw->phy.media_type != e1000_media_type_internal_serdes)) + return; + + /* if the management interface is not enabled, then power down */ + if (!igb_enable_mng_pass_thru(hw)) { + /* Disable PCS to turn off link */ + reg = rd32(E1000_PCS_CFG0); + reg &= ~E1000_PCS_CFG_PCS_EN; + wr32(E1000_PCS_CFG0, reg); + + /* shutdown the laser */ + reg = rd32(E1000_CTRL_EXT); + reg |= E1000_CTRL_EXT_SDP7_DATA; + wr32(E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + wrfl(); + msleep(1); + } return; } @@ -854,7 +972,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) igb_clear_vfta(hw); /* Setup the receive address */ - igb_init_rx_addrs(hw, rar_count); + igb_init_rx_addrs_82575(hw, rar_count); /* Zero out the Multicast HASH table */ hw_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) @@ -1114,6 +1232,70 @@ out: } /** + * igb_translate_register_82576 - Translate the proper register offset + * @reg: e1000 register to be read + * + * Registers in 82576 are located in different offsets than other adapters + * even though they function in the same manner. This function takes in + * the name of the register to read and returns the correct offset for + * 82576 silicon. + **/ +u32 igb_translate_register_82576(u32 reg) +{ + /* + * Some of the Kawela registers are located at different + * offsets than they are in older adapters. + * Despite the difference in location, the registers + * function in the same manner. + */ + switch (reg) { + case E1000_TDBAL(0): + reg = 0x0E000; + break; + case E1000_TDBAH(0): + reg = 0x0E004; + break; + case E1000_TDLEN(0): + reg = 0x0E008; + break; + case E1000_TDH(0): + reg = 0x0E010; + break; + case E1000_TDT(0): + reg = 0x0E018; + break; + case E1000_TXDCTL(0): + reg = 0x0E028; + break; + case E1000_RDBAL(0): + reg = 0x0C000; + break; + case E1000_RDBAH(0): + reg = 0x0C004; + break; + case E1000_RDLEN(0): + reg = 0x0C008; + break; + case E1000_RDH(0): + reg = 0x0C010; + break; + case E1000_RDT(0): + reg = 0x0C018; + break; + case E1000_RXDCTL(0): + reg = 0x0C028; + break; + case E1000_SRRCTL(0): + reg = 0x0C00C; + break; + default: + break; + } + + return reg; +} + +/** * igb_reset_init_script_82575 - Inits HW defaults after reset * @hw: pointer to the HW structure * @@ -1304,7 +1486,7 @@ static struct e1000_mac_operations e1000_mac_ops_82575 = { .reset_hw = igb_reset_hw_82575, .init_hw = igb_init_hw_82575, .check_for_link = igb_check_for_link_82575, - .rar_set = igb_rar_set_82575, + .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, .get_speed_and_duplex = igb_get_speed_and_duplex_copper, }; diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index 02e57a8..d273236 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -28,9 +28,13 @@ #ifndef _E1000_82575_H_ #define _E1000_82575_H_ +u32 igb_translate_register_82576(u32 reg); +void igb_update_mc_addr_list_82575(struct e1000_hw*, u8*, u32, u32, u32); +extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); #define E1000_RAR_ENTRIES_82575 16 +#define E1000_RAR_ENTRIES_82576 24 /* SRRCTL bit definitions */ #define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ @@ -159,5 +163,10 @@ struct e1000_adv_tx_context_desc { #define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ #define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ +/* Additional DCA related definitions, note change in position of CPUID */ +#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ +#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ +#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */ +#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */ #endif diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index ed748dc..afdba3c 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -90,6 +90,11 @@ #define E1000_I2CCMD_ERROR 0x80000000 #define E1000_MAX_SGMII_PHY_REG_ADDR 255 #define E1000_I2CCMD_PHY_TIMEOUT 200 +#define E1000_IVAR_VALID 0x80 +#define E1000_GPIE_NSICR 0x00000001 +#define E1000_GPIE_MSIX_MODE 0x00000010 +#define E1000_GPIE_EIAME 0x40000000 +#define E1000_GPIE_PBA 0x80000000 /* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ @@ -213,6 +218,7 @@ /* Device Control */ #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ #define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ #define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ #define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ #define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ @@ -244,6 +250,7 @@ */ #define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_PCS_CFG_PCS_EN 8 #define E1000_PCS_LCTL_FLV_LINK_UP 1 #define E1000_PCS_LCTL_FSV_100 2 #define E1000_PCS_LCTL_FSV_1000 4 @@ -253,6 +260,7 @@ #define E1000_PCS_LCTL_AN_ENABLE 0x10000 #define E1000_PCS_LCTL_AN_RESTART 0x20000 #define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 +#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 #define E1000_PCS_LSTS_LINK_OK 1 #define E1000_PCS_LSTS_SPEED_100 2 @@ -360,6 +368,7 @@ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_24K 0x0018 #define E1000_PBA_34K 0x0022 +#define E1000_PBA_64K 0x0040 /* 64KB */ #define IFS_MAX 80 #define IFS_MIN 40 @@ -528,6 +537,7 @@ /* PHY Control Register */ #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 746c3ea..19fa4ee 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -38,6 +38,10 @@ struct e1000_hw; +#define E1000_DEV_ID_82576 0x10C9 +#define E1000_DEV_ID_82576_FIBER 0x10E6 +#define E1000_DEV_ID_82576_SERDES 0x10E7 +#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 #define E1000_DEV_ID_82575EB_COPPER 0x10A7 #define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 #define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 @@ -50,6 +54,7 @@ struct e1000_hw; enum e1000_mac_type { e1000_undefined = 0, e1000_82575, + e1000_82576, e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ }; @@ -410,14 +415,17 @@ struct e1000_mac_operations { s32 (*check_for_link)(struct e1000_hw *); s32 (*reset_hw)(struct e1000_hw *); s32 (*init_hw)(struct e1000_hw *); + bool (*check_mng_mode)(struct e1000_hw *); s32 (*setup_physical_interface)(struct e1000_hw *); void (*rar_set)(struct e1000_hw *, u8 *, u32); s32 (*read_mac_addr)(struct e1000_hw *); s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); + void (*mta_set)(struct e1000_hw *, u32); }; struct e1000_phy_operations { s32 (*acquire_phy)(struct e1000_hw *); + s32 (*check_reset_block)(struct e1000_hw *); s32 (*force_speed_duplex)(struct e1000_hw *); s32 (*get_cfg_done)(struct e1000_hw *hw); s32 (*get_cable_length)(struct e1000_hw *); diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 47ad2c4..20408aa 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -36,7 +36,6 @@ static s32 igb_set_default_fc(struct e1000_hw *hw); static s32 igb_set_fc_watermarks(struct e1000_hw *hw); -static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); /** * igb_remove_device - Free device specific structure @@ -360,7 +359,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, * the multicast filter table array address and new table value. See * igb_mta_set() **/ -static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) +u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { u32 hash_value, hash_mask; u8 bit_shift = 0; diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index 326b659..dc2f8cc 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -94,5 +94,6 @@ enum e1000_mng_mode { #define E1000_HICR_C 0x02 extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); +extern u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); #endif diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index d25e914..b95093d 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -56,6 +56,9 @@ #define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ #define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ #define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ +#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ #define E1000_TCTL 0x00400 /* TX Control - RW */ #define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ #define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ @@ -217,6 +220,7 @@ #define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ #define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_RA2 0x054E0 /* 2nd half of receive address array - RW Array */ #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ #define E1000_VMD_CTL 0x0581C /* VMDq Control - RW */ #define E1000_WUC 0x05800 /* Wakeup Control - RW */ @@ -258,7 +262,8 @@ #define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */ -#define E1000_REGISTER(a, reg) reg +#define E1000_REGISTER(a, reg) (((a)->mac.type < e1000_82576) \ + ? reg : e1000_translate_register_82576(reg)) #define wr32(reg, value) (writel(value, hw->hw_addr + reg)) #define rd32(reg) (readl(hw->hw_addr + reg)) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index ed756c1..e27d5a5 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -827,8 +827,9 @@ err_setup: /* ethtool register test data */ struct igb_reg_test { u16 reg; - u8 array_len; - u8 test_type; + u16 reg_offset; + u16 array_len; + u16 test_type; u32 mask; u32 write; }; @@ -850,34 +851,72 @@ struct igb_reg_test { #define TABLE64_TEST_LO 5 #define TABLE64_TEST_HI 6 -/* default register test */ +/* 82576 reg test */ +static struct igb_reg_test reg_test_82576[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 8, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 8, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 8, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + /* Enable all four RX queues before testing. */ + { E1000_RXDCTL(0), 0x100, 1, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + /* RDH is read-only for 82576, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 8, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 8, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 8, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128,TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82575 register test */ static struct igb_reg_test reg_test_82575[] = { - { E1000_FCAL, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_FCAH, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_FCT, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_VET, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, /* Enable all four RX queues before testing. */ - { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, /* RDH is read-only for 82575, only test RDT. */ - { E1000_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, - { E1000_FCRTH, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, - { E1000_FCTTV, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TIPG, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, - { E1000_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { E1000_RCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, - { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, - { E1000_TCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_TXCW, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, - { E1000_RA, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF }, - { E1000_MTA, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, { 0, 0, 0, 0 } }; @@ -937,7 +976,15 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) u32 i, toggle; toggle = 0x7FFFF3FF; - test = reg_test_82575; + + switch (adapter->hw.mac.type) { + case e1000_82576: + test = reg_test_82576; + break; + default: + test = reg_test_82575; + break; + } /* Because the status register is such a special case, * we handle it separately from the rest of the register @@ -964,19 +1011,19 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) for (i = 0; i < test->array_len; i++) { switch (test->test_type) { case PATTERN_TEST: - REG_PATTERN_TEST(test->reg + (i * 0x100), + REG_PATTERN_TEST(test->reg + (i * test->reg_offset), test->mask, test->write); break; case SET_READ_TEST: - REG_SET_AND_CHECK(test->reg + (i * 0x100), + REG_SET_AND_CHECK(test->reg + (i * test->reg_offset), test->mask, test->write); break; case WRITE_NO_TEST: writel(test->write, (adapter->hw.hw_addr + test->reg) - + (i * 0x100)); + + (i * test->reg_offset)); break; case TABLE32_TEST: REG_PATTERN_TEST(test->reg + (i * 4), @@ -1392,13 +1439,39 @@ static int igb_set_phy_loopback(struct igb_adapter *adapter) static int igb_setup_loopback_test(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - u32 rctl; + u32 reg; if (hw->phy.media_type == e1000_media_type_fiber || hw->phy.media_type == e1000_media_type_internal_serdes) { - rctl = rd32(E1000_RCTL); - rctl |= E1000_RCTL_LBM_TCVR; - wr32(E1000_RCTL, rctl); + reg = rd32(E1000_RCTL); + reg |= E1000_RCTL_LBM_TCVR; + wr32(E1000_RCTL, reg); + + wr32(E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK); + + reg = rd32(E1000_CTRL); + reg &= ~(E1000_CTRL_RFCE | + E1000_CTRL_TFCE | + E1000_CTRL_LRST); + reg |= E1000_CTRL_SLU | + E1000_CTRL_FD; + wr32(E1000_CTRL, reg); + + /* Unset switch control to serdes energy detect */ + reg = rd32(E1000_CONNSW); + reg &= ~E1000_CONNSW_ENRGSRC; + wr32(E1000_CONNSW, reg); + + /* Set PCS register for forced speed */ + reg = rd32(E1000_PCS_LCTL); + reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/ + reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ + E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ + E1000_PCS_LCTL_FSD | /* Force Speed */ + E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ + wr32(E1000_PCS_LCTL, reg); + return 0; } else if (hw->phy.media_type == e1000_media_type_copper) { return igb_set_phy_loopback(adapter); @@ -1654,10 +1727,13 @@ static int igb_wol_exclusion(struct igb_adapter *adapter, switch (hw->device_id) { case E1000_DEV_ID_82575GB_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER: /* WoL not supported */ wol->supported = 0; break; case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: /* Wake events not supported on port B */ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1436326..ba043c4 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -51,7 +51,7 @@ char igb_driver_name[] = "igb"; char igb_driver_version[] = DRV_VERSION; static const char igb_driver_string[] = "Intel(R) Gigabit Ethernet Network Driver"; -static const char igb_copyright[] = "Copyright (c) 2007 Intel Corporation."; +static const char igb_copyright[] = "Copyright (c) 2008 Intel Corporation."; static const struct e1000_info *igb_info_tbl[] = { @@ -59,6 +59,10 @@ static const struct e1000_info *igb_info_tbl[] = { }; static struct pci_device_id igb_pci_tbl[] = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 }, @@ -268,6 +272,10 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue, { u32 msixbm = 0; struct e1000_hw *hw = &adapter->hw; + u32 ivar, index; + + switch (hw->mac.type) { + case e1000_82575: /* The 82575 assigns vectors using a bitmask, which matches the bitmask for the EICR/EIMS/EIMC registers. To assign one or more queues to a vector, we write the appropriate bits @@ -282,6 +290,47 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue, E1000_EICR_TX_QUEUE0 << tx_queue; } array_wr32(E1000_MSIXBM(0), msix_vector, msixbm); + break; + case e1000_82576: + /* Kawela uses a table-based method for assigning vectors. + Each queue has a single entry in the table to which we write + a vector number along with a "valid" bit. Sadly, the layout + of the table is somewhat counterintuitive. */ + if (rx_queue > IGB_N0_QUEUE) { + index = (rx_queue & 0x7); + ivar = array_rd32(E1000_IVAR0, index); + if (rx_queue < 8) { + /* vector goes into low byte of register */ + ivar = ivar & 0xFFFFFF00; + ivar |= msix_vector | E1000_IVAR_VALID; + } else { + /* vector goes into third byte of register */ + ivar = ivar & 0xFF00FFFF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 16; + } + adapter->rx_ring[rx_queue].eims_value= 1 << msix_vector; + array_wr32(E1000_IVAR0, index, ivar); + } + if (tx_queue > IGB_N0_QUEUE) { + index = (tx_queue & 0x7); + ivar = array_rd32(E1000_IVAR0, index); + if (tx_queue < 8) { + /* vector goes into second byte of register */ + ivar = ivar & 0xFFFF00FF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 8; + } else { + /* vector goes into high byte of register */ + ivar = ivar & 0x00FFFFFF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 24; + } + adapter->tx_ring[tx_queue].eims_value= 1 << msix_vector; + array_wr32(E1000_IVAR0, index, ivar); + } + break; + default: + BUG(); + break; + } } /** @@ -297,6 +346,12 @@ static void igb_configure_msix(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; adapter->eims_enable_mask = 0; + if (hw->mac.type == e1000_82576) + /* Turn on MSI-X capability first, or our settings + * won't stick. And it will take days to debug. */ + wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE | + E1000_GPIE_PBA | E1000_GPIE_EIAME | + E1000_GPIE_NSICR); for (i = 0; i < adapter->num_tx_queues; i++) { struct igb_ring *tx_ring = &adapter->tx_ring[i]; @@ -322,6 +377,8 @@ static void igb_configure_msix(struct igb_adapter *adapter) /* set vector for other causes, i.e. link changes */ + switch (hw->mac.type) { + case e1000_82575: array_wr32(E1000_MSIXBM(0), vector++, E1000_EIMS_OTHER); @@ -337,6 +394,19 @@ static void igb_configure_msix(struct igb_adapter *adapter) adapter->eims_enable_mask |= E1000_EIMS_OTHER; adapter->eims_other = E1000_EIMS_OTHER; + break; + + case e1000_82576: + tmp = (vector++ | E1000_IVAR_VALID) << 8; + wr32(E1000_IVAR_MISC, tmp); + + adapter->eims_enable_mask = (1 << (vector)) - 1; + adapter->eims_other = 1 << (vector - 1); + break; + default: + /* do nothing, since nothing else supports MSI-X */ + break; + } /* switch (hw->mac.type) */ wrfl(); } @@ -474,8 +544,17 @@ static int igb_request_irq(struct igb_adapter *adapter) adapter->num_rx_queues = 1; igb_alloc_queues(adapter); } else { - wr32(E1000_MSIXBM(0), (E1000_EICR_RX_QUEUE0 | - E1000_EIMS_OTHER)); + switch (hw->mac.type) { + case e1000_82575: + wr32(E1000_MSIXBM(0), + (E1000_EICR_RX_QUEUE0 | E1000_EIMS_OTHER)); + break; + case e1000_82576: + wr32(E1000_IVAR0, E1000_IVAR_VALID); + break; + default: + break; + } } if (adapter->msi_enabled) { @@ -770,16 +849,23 @@ void igb_reinit_locked(struct igb_adapter *adapter) void igb_reset(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct e1000_fc_info *fc = &adapter->hw.fc; + struct e1000_mac_info *mac = &hw->mac; + struct e1000_fc_info *fc = &hw->fc; u32 pba = 0, tx_space, min_tx_space, min_rx_space; u16 hwm; /* Repartition Pba for greater than 9k mtu * To take effect CTRL.RST is required. */ + if (mac->type != e1000_82576) { pba = E1000_PBA_34K; + } + else { + pba = E1000_PBA_64K; + } - if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { + if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) && + (mac->type < e1000_82576)) { /* adjust PBA for jumbo frames */ wr32(E1000_PBA, pba); @@ -818,8 +904,8 @@ void igb_reset(struct igb_adapter *adapter) if (pba < min_rx_space) pba = min_rx_space; } + wr32(E1000_PBA, pba); } - wr32(E1000_PBA, pba); /* flow control settings */ /* The high water mark must be low enough to fit one full frame @@ -828,10 +914,15 @@ void igb_reset(struct igb_adapter *adapter) * - 90% of the Rx FIFO size, or * - the full Rx FIFO size minus one full frame */ hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - adapter->max_frame_size)); + ((pba << 10) - 2 * adapter->max_frame_size)); - fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ - fc->low_water = fc->high_water - 8; + if (mac->type < e1000_82576) { + fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } else { + fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; + } fc->pause_time = 0xFFFF; fc->send_xon = 1; fc->type = fc->original_type; @@ -1118,9 +1209,12 @@ static int __devinit igb_probe(struct pci_dev *pdev, * lan on a particular port */ switch (pdev->device) { case E1000_DEV_ID_82575GB_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER: adapter->eeprom_wol = 0; break; case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: /* Wake events only supported on port A for dual fiber * regardless of eeprom setting */ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) @@ -1801,7 +1895,10 @@ static void igb_configure_rx(struct igb_adapter *adapter) get_random_bytes(&random[0], 40); - shift = 6; + if (hw->mac.type >= e1000_82576) + shift = 0; + else + shift = 6; for (j = 0; j < (32 * 4); j++) { reta.bytes[j & 3] = (j % adapter->num_rx_queues) << shift; @@ -2127,7 +2224,7 @@ static void igb_set_multi(struct net_device *netdev) if (!netdev->mc_count) { /* nothing to program, so clear mc list */ - igb_update_mc_addr_list(hw, NULL, 0, 1, + igb_update_mc_addr_list_82575(hw, NULL, 0, 1, mac->rar_entry_count); return; } @@ -2145,7 +2242,8 @@ static void igb_set_multi(struct net_device *netdev) memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN); mc_ptr = mc_ptr->next; } - igb_update_mc_addr_list(hw, mta_list, i, 1, mac->rar_entry_count); + igb_update_mc_addr_list_82575(hw, mta_list, i, 1, + mac->rar_entry_count); kfree(mta_list); } @@ -3211,8 +3309,14 @@ static void igb_update_rx_dca(struct igb_ring *rx_ring) if (rx_ring->cpu != cpu) { dca_rxctrl = rd32(E1000_DCA_RXCTRL(q)); - dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK; - dca_rxctrl |= dca_get_tag(cpu); + if (hw->mac.type == e1000_82576) { + dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576; + dca_rxctrl |= dca_get_tag(cpu) << + E1000_DCA_RXCTRL_CPUID_SHIFT; + } else { + dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK; + dca_rxctrl |= dca_get_tag(cpu); + } dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN; dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN; dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN; @@ -3232,8 +3336,14 @@ static void igb_update_tx_dca(struct igb_ring *tx_ring) if (tx_ring->cpu != cpu) { dca_txctrl = rd32(E1000_DCA_TXCTRL(q)); - dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK; - dca_txctrl |= dca_get_tag(cpu); + if (hw->mac.type == e1000_82576) { + dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576; + dca_txctrl |= dca_get_tag(cpu) << + E1000_DCA_TXCTRL_CPUID_SHIFT; + } else { + dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK; + dca_txctrl |= dca_get_tag(cpu); + } dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN; wr32(E1000_DCA_TXCTRL(q), dca_txctrl); tx_ring->cpu = cpu; @@ -3572,7 +3682,7 @@ done_cleaning: /* detected Tx unit hang */ dev_err(&adapter->pdev->dev, "Detected Tx Unit Hang\n" - " Tx Queue <%lu>\n" + " Tx Queue <%d>\n" " TDH <%x>\n" " TDT <%x>\n" " next_to_use <%x>\n" @@ -3582,8 +3692,7 @@ done_cleaning: " time_stamp <%lx>\n" " jiffies <%lx>\n" " desc.status <%x>\n", - (unsigned long)((tx_ring - adapter->tx_ring) / - sizeof(struct igb_ring)), + tx_ring->queue_index, readl(adapter->hw.hw_addr + tx_ring->head), readl(adapter->hw.hw_addr + tx_ring->tail), tx_ring->next_to_use, @@ -4098,7 +4207,7 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state) struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 ctrl, ctrl_ext, rctl, status; + u32 ctrl, rctl, status; u32 wufc = adapter->wol; #ifdef CONFIG_PM int retval = 0; @@ -4141,33 +4250,24 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state) ctrl |= E1000_CTRL_ADVD3WUC; wr32(E1000_CTRL, ctrl); - if (adapter->hw.phy.media_type == e1000_media_type_fiber || - adapter->hw.phy.media_type == - e1000_media_type_internal_serdes) { - /* keep the laser running in D3 */ - ctrl_ext = rd32(E1000_CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; - wr32(E1000_CTRL_EXT, ctrl_ext); - } - /* Allow time for pending master requests to run */ igb_disable_pcie_master(&adapter->hw); wr32(E1000_WUC, E1000_WUC_PME_EN); wr32(E1000_WUFC, wufc); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); } else { wr32(E1000_WUC, 0); wr32(E1000_WUFC, 0); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); } - /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->en_mng_pt) { + /* make sure adapter isn't asleep if manageability/wol is enabled */ + if (wufc || adapter->en_mng_pt) { pci_enable_wake(pdev, PCI_D3hot, 1); pci_enable_wake(pdev, PCI_D3cold, 1); + } else { + igb_shutdown_fiber_serdes_link_82575(hw); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); } /* Release control of h/w to f/w. If f/w is AMT enabled, this |