diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/staging/tm6000/tm6000-cards.c | 37 |
1 files changed, 28 insertions, 9 deletions
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c index e43a4c4..5155572 100644 --- a/drivers/staging/tm6000/tm6000-cards.c +++ b/drivers/staging/tm6000/tm6000-cards.c @@ -195,9 +195,16 @@ struct tm6000_board tm6000_boards[] = { .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, + .has_remote = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, }, }, [TM6010_BOARD_BEHOLD_WANDER] = { @@ -248,6 +255,12 @@ struct tm6000_board tm6000_boards[] = { }, .gpio = { .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, }, }, [TM6010_BOARD_TWINHAN_TU501] = { @@ -265,6 +278,12 @@ struct tm6000_board tm6000_boards[] = { }, .gpio = { .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, }, } }; @@ -382,30 +401,30 @@ int tm6000_cards_setup(struct tm6000_core *dev) case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: /* Turn xceive 3028 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01); msleep(15); /* Turn zarlink zl10353 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x00); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); msleep(15); /* Reset zarlink zl10353 */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_1, 0x00); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); msleep(50); - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_1, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); msleep(15); /* Turn zarlink zl10353 off */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01); msleep(15); /* ir ? */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_0, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01); msleep(15); /* Power led on (blue) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_7, 0x00); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); msleep(15); /* DVB led off (orange) */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_5, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01); msleep(15); /* Turn zarlink zl10353 on */ - tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x00); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); msleep(15); break; default: |