diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/acpi/Makefile | 3 | ||||
| -rw-r--r-- | drivers/acpi/bus.c | 21 | ||||
| -rw-r--r-- | drivers/acpi/device_pm.c | 668 | ||||
| -rw-r--r-- | drivers/acpi/scan.c | 9 | ||||
| -rw-r--r-- | drivers/acpi/sleep.c | 178 | ||||
| -rw-r--r-- | drivers/base/power/domain.c | 11 | ||||
| -rw-r--r-- | drivers/base/power/power.h | 6 | ||||
| -rw-r--r-- | drivers/base/power/qos.c | 308 | ||||
| -rw-r--r-- | drivers/base/power/sysfs.c | 94 | ||||
| -rw-r--r-- | drivers/mtd/nand/sh_flctl.c | 4 | ||||
| -rw-r--r-- | drivers/pci/pci-acpi.c | 79 |
11 files changed, 1061 insertions, 320 deletions
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 7198b6d..2a4502b 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -21,9 +21,10 @@ obj-y += acpi.o \ acpi-y += osl.o utils.o reboot.o acpi-y += nvs.o -# sleep related files +# Power management related files acpi-y += wakeup.o acpi-y += sleep.o +acpi-$(CONFIG_PM) += device_pm.o acpi-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index d59175e..1f0d457 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -257,7 +257,15 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state) } -static int __acpi_bus_set_power(struct acpi_device *device, int state) +/** + * acpi_device_set_power - Set power state of an ACPI device. + * @device: Device to set the power state of. + * @state: New power state to set. + * + * Callers must ensure that the device is power manageable before using this + * function. + */ +int acpi_device_set_power(struct acpi_device *device, int state) { int result = 0; acpi_status status = AE_OK; @@ -298,6 +306,12 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state) * a lower-powered state. */ if (state < device->power.state) { + if (device->power.state >= ACPI_STATE_D3_HOT && + state != ACPI_STATE_D0) { + printk(KERN_WARNING PREFIX + "Cannot transition to non-D0 state from D3\n"); + return -ENODEV; + } if (device->power.flags.power_resources) { result = acpi_power_transition(device, state); if (result) @@ -341,6 +355,7 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state) return result; } +EXPORT_SYMBOL(acpi_device_set_power); int acpi_bus_set_power(acpi_handle handle, int state) @@ -359,7 +374,7 @@ int acpi_bus_set_power(acpi_handle handle, int state) return -ENODEV; } - return __acpi_bus_set_power(device, state); + return acpi_device_set_power(device, state); } EXPORT_SYMBOL(acpi_bus_set_power); @@ -402,7 +417,7 @@ int acpi_bus_update_power(acpi_handle handle, int *state_p) if (result) return result; - result = __acpi_bus_set_power(device, state); + result = acpi_device_set_power(device, state); if (!result && state_p) *state_p = state; diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c new file mode 100644 index 0000000..f09dc98 --- /dev/null +++ b/drivers/acpi/device_pm.c @@ -0,0 +1,668 @@ +/* + * drivers/acpi/device_pm.c - ACPI device power management routines. + * + * Copyright (C) 2012, Intel Corp. + * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/device.h> +#include <linux/export.h> +#include <linux/mutex.h> +#include <linux/pm_qos.h> +#include <linux/pm_runtime.h> + +#include <acpi/acpi.h> +#include <acpi/acpi_bus.h> + +static DEFINE_MUTEX(acpi_pm_notifier_lock); + +/** + * acpi_add_pm_notifier - Register PM notifier for given ACPI device. + * @adev: ACPI device to add the notifier for. + * @context: Context information to pass to the notifier routine. + * + * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of + * PM wakeup events. For example, wakeup events may be generated for bridges + * if one of the devices below the bridge is signaling wakeup, even if the + * bridge itself doesn't have a wakeup GPE associated with it. + */ +acpi_status acpi_add_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler, void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&acpi_pm_notifier_lock); + + if (adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + +/** + * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @adev: ACPI device to remove the notifier from. + */ +acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&acpi_pm_notifier_lock); + + if (!adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + +/** + * acpi_device_power_state - Get preferred power state of ACPI device. + * @dev: Device whose preferred target power state to return. + * @adev: ACPI device node corresponding to @dev. + * @target_state: System state to match the resultant device state. + * @d_max_in: Deepest low-power state to take into consideration. + * @d_min_p: Location to store the upper limit of the allowed states range. + * Return value: Preferred power state of the device on success, -ENODEV + * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure + * + * Find the lowest power (highest number) ACPI device power state that the + * device can be in while the system is in the state represented by + * @target_state. If @d_min_p is set, the highest power (lowest number) device + * power state that @dev can be in for the given system sleep state is stored + * at the location pointed to by it. + * + * Callers must ensure that @dev and @adev are valid pointers and that @adev + * actually corresponds to @dev before using this function. + */ +int acpi_device_power_state(struct device *dev, struct acpi_device *adev, + u32 target_state, int d_max_in, int *d_min_p) +{ + char acpi_method[] = "_SxD"; + unsigned long long d_min, d_max; + bool wakeup = false; + + if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3) + return -EINVAL; + + if (d_max_in > ACPI_STATE_D3_HOT) { + enum pm_qos_flags_status stat; + + stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); + if (stat == PM_QOS_FLAGS_ALL) + d_max_in = ACPI_STATE_D3_HOT; + } + + acpi_method[2] = '0' + target_state; + /* + * If the sleep state is S0, the lowest limit from ACPI is D3, + * but if the device has _S0W, we will use the value from _S0W + * as the lowest limit from ACPI. Finally, we will constrain + * the lowest limit with the specified one. + */ + d_min = ACPI_STATE_D0; + d_max = ACPI_STATE_D3; + + /* + * If present, _SxD methods return the minimum D-state (highest power + * state) we can use for the corresponding S-states. Otherwise, the + * minimum D-state is D0 (ACPI 3.x). + * + * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer + * provided -- that's our fault recovery, we ignore retval. + */ + if (target_state > ACPI_STATE_S0) { + acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min); + wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid + && adev->wakeup.sleep_state >= target_state; + } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) != + PM_QOS_FLAGS_NONE) { + wakeup = adev->wakeup.flags.valid; + } + + /* + * If _PRW says we can wake up the system from the target sleep state, + * the D-state returned by _SxD is sufficient for that (we assume a + * wakeup-aware driver if wake is set). Still, if _SxW exists + * (ACPI 3.x), it should return the maximum (lowest power) D-state that + * can wake the system. _S0W may be valid, too. + */ + if (wakeup) { + acpi_status status; + + acpi_method[3] = 'W'; + status = acpi_evaluate_integer(adev->handle, acpi_method, NULL, + &d_max); + if (ACPI_FAILURE(status)) { + if (target_state != ACPI_STATE_S0 || + status != AE_NOT_FOUND) + d_max = d_min; + } else if (d_max < d_min) { + /* Warn the user of the broken DSDT */ + printk(KERN_WARNING "ACPI: Wrong value from %s\n", + acpi_method); + /* Sanitize it */ + d_min = d_max; + } + } + + if (d_max_in < d_min) + return -EINVAL; + if (d_min_p) + *d_min_p = d_min; + /* constrain d_max with specified lowest limit (max number) */ + if (d_max > d_max_in) { + for (d_max = d_max_in; d_max > d_min; d_max--) { + if (adev->power.states[d_max].flags.valid) + break; + } + } + return d_max; +} +EXPORT_SYMBOL_GPL(acpi_device_power_state); + +/** + * acpi_pm_device_sleep_state - Get preferred power state of ACPI device. + * @dev: Device whose preferred target power state to return. + * @d_min_p: Location to store the upper limit of the allowed states range. + * @d_max_in: Deepest low-power state to take into consideration. + * Return value: Preferred power state of the device on success, -ENODEV + * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure + * + * The caller must ensure that @dev is valid before using this function. + */ +int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(dev); + struct acpi_device *adev; + + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + dev_dbg(dev, "ACPI handle without context in %s!\n", __func__); + return -ENODEV; + } + + return acpi_device_power_state(dev, adev, acpi_target_system_state(), + d_max_in, d_min_p); +} +EXPORT_SYMBOL(acpi_pm_device_sleep_state); + +#ifdef CONFIG_PM_RUNTIME +/** + * acpi_wakeup_device - Wakeup notification handler for ACPI devices. + * @handle: ACPI handle of the device the notification is for. + * @event: Type of the signaled event. + * @context: Device corresponding to @handle. + */ +static void acpi_wakeup_device(acpi_handle handle, u32 event, void *context) +{ + struct device *dev = context; + + if (event == ACPI_NOTIFY_DEVICE_WAKE && dev) { + pm_wakeup_event(dev, 0); + pm_runtime_resume(dev); + } +} + +/** + * __acpi_device_run_wake - Enable/disable runtime remote wakeup for device. + * @adev: ACPI device to enable/disable the remote wakeup for. + * @enable: Whether to enable or disable the wakeup functionality. + * + * Enable/disable the GPE associated with @adev so that it can generate + * wakeup signals for the device in response to external (remote) events and + * enable/disable device wakeup power. + * + * Callers must ensure that @adev is a valid ACPI device node before executing + * this function. + */ +int __acpi_device_run_wake(struct acpi_device *adev, bool enable) +{ + struct acpi_device_wakeup *wakeup = &adev->wakeup; + + if (enable) { + acpi_status res; + int error; + + error = acpi_enable_wakeup_device_power(adev, ACPI_STATE_S0); + if (error) + return error; + + res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number); + if (ACPI_FAILURE(res)) { + acpi_disable_wakeup_device_power(adev); + return -EIO; + } + } else { + acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number); + acpi_disable_wakeup_device_power(adev); + } + return 0; +} + +/** + * acpi_pm_device_run_wake - Enable/disable remote wakeup for given device. + * @dev: Device to enable/disable the platform to wake up. + * @enable: Whether to enable or disable the wakeup functionality. + */ +int acpi_pm_device_run_wake(struct device *phys_dev, bool enable) +{ + struct acpi_device *adev; + acpi_handle handle; + + if (!device_run_wake(phys_dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(phys_dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + dev_dbg(phys_dev, "ACPI handle without context in %s!\n", + __func__); + return -ENODEV; + } + + return __acpi_device_run_wake(adev, enable); +} +EXPORT_SYMBOL(acpi_pm_device_run_wake); +#else +static inline void acpi_wakeup_device(acpi_handle handle, u32 event, + void *context) {} +#endif /* CONFIG_PM_RUNTIME */ + + #ifdef CONFIG_PM_SLEEP +/** + * __acpi_device_sleep_wake - Enable or disable device to wake up the system. + * @dev: Device to enable/desible to wake up the system. + * @target_state: System state the device is supposed to wake up from. + * @enable: Whether to enable or disable @dev to wake up the system. + */ +int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state, + bool enable) +{ + return enable ? + acpi_enable_wakeup_device_power(adev, target_state) : + acpi_disable_wakeup_device_power(adev); +} + +/** + * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system. + * @dev: Device to enable/desible to wake up the system from sleep states. + * @enable: Whether to enable or disable @dev to wake up the system. + */ +int acpi_pm_device_sleep_wake(struct device *dev, bool enable) +{ + acpi_handle handle; + struct acpi_device *adev; + int error; + + if (!device_can_wakeup(dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + dev_dbg(dev, "ACPI handle without context in %s!\n", __func__); + return -ENODEV; + } + + error = __acpi_device_sleep_wake(adev, acpi_target_system_state(), + enable); + if (!error) + dev_info(dev, "System wakeup %s by ACPI\n", + enable ? "enabled" : "disabled"); + + return error; +} +#endif /* CONFIG_PM_SLEEP */ + +/** + * acpi_dev_pm_get_node - Get ACPI device node for the given physical device. + * @dev: Device to get the ACPI node for. + */ +static struct acpi_device *acpi_dev_pm_get_node(struct device *dev) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(dev); + struct acpi_device *adev; + + return handle && ACPI_SUCCESS(acpi_bus_get_device(handle, &adev)) ? + adev : NULL; +} + +/** + * acpi_dev_pm_low_power - Put ACPI device into a low-power state. + * @dev: Device to put into a low-power state. + * @adev: ACPI device node corresponding to @dev. + * @system_state: System state to choose the device state for. + */ +static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev, + u32 system_state) +{ + int power_state; + + if (!acpi_device_power_manageable(adev)) + return 0; + + power_state = acpi_device_power_state(dev, adev, system_state, + ACPI_STATE_D3, NULL); + if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3) + return -EIO; + + return acpi_device_set_power(adev, power_state); +} + +/** + * acpi_dev_pm_full_power - Put ACPI device into the full-power state. + * @adev: ACPI device node to put into the full-power state. + */ +static int acpi_dev_pm_full_power(struct acpi_device *adev) +{ + return acpi_device_power_manageable(adev) ? + acpi_device_set_power(adev, ACPI_STATE_D0) : 0; +} + +#ifdef CONFIG_PM_RUNTIME +/** + * acpi_dev_runtime_suspend - Put device into a low-power state using ACPI. + * @dev: Device to put into a low-power state. + * + * Put the given device into a runtime low-power state using the standard ACPI + * mechanism. Set up remote wakeup if desired, choose the state to put the + * device into (this checks if remote wakeup is expected to work too), and set + * the power state of the device. + */ +int acpi_dev_runtime_suspend(struct device *dev) +{ + struct acpi_device *adev = acpi_dev_pm_get_node(dev); + bool remote_wakeup; + int error; + + if (!adev) + return 0; + + remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) > + PM_QOS_FLAGS_NONE; + error = __acpi_device_run_wake(adev, remote_wakeup); + if (remote_wakeup && error) + return -EAGAIN; + + error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0); + if (error) + __acpi_device_run_wake(adev, false); + + return error; +} +EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend); + +/** + * acpi_dev_runtime_resume - Put device into the full-power state using ACPI. + * @dev: Device to put into the full-power state. + * + * Put the given device into the full-power state using the standard ACPI + * mechanism at run time. Set the power state of the device to ACPI D0 and + * disable remote wakeup. + */ +int acpi_dev_runtime_resume(struct device *dev) +{ + struct acpi_device *adev = acpi_dev_pm_get_node(dev); + int error; + + if (!adev) + return 0; + + error = acpi_dev_pm_full_power(adev); + __acpi_device_run_wake(adev, false); + return error; +} +EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume); + +/** + * acpi_subsys_runtime_suspend - Suspend device using ACPI. + * @dev: Device to suspend. + * + * Carry out the generic runtime suspend procedure for @dev and use ACPI to put + * it into a runtime low-power state. + */ +int acpi_subsys_runtime_suspend(struct device *dev) +{ + int ret = pm_generic_runtime_suspend(dev); + return ret ? ret : acpi_dev_runtime_suspend(dev); +} +EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend); + +/** + * acpi_subsys_runtime_resume - Resume device using ACPI. + * @dev: Device to Resume. + * + * Use ACPI to put the given device into the full-power state and carry out the + * generic runtime resume procedure for it. + */ +int acpi_subsys_runtime_resume(struct device *dev) +{ + int ret = acpi_dev_runtime_resume(dev); + return ret ? ret : pm_generic_runtime_resume(dev); +} +EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume); +#endif /* CONFIG_PM_RUNTIME */ + +#ifdef CONFIG_PM_SLEEP +/** + * acpi_dev_suspend_late - Put device into a low-power state using ACPI. + * @dev: Device to put into a low-power state. + * + * Put the given device into a low-power state during system transition to a + * sleep state using the standard ACPI mechanism. Set up system wakeup if + * desired, choose the state to put the device into (this checks if system + * wakeup is expected to work too), and set the power state of the device. + */ +int acpi_dev_suspend_late(struct device *dev) +{ + struct acpi_device *adev = acpi_dev_pm_get_node(dev); + u32 target_state; + bool wakeup; + int error; + + if (!adev) + return 0; + + target_state = acpi_target_system_state(); + wakeup = device_may_wakeup(dev); + error = __acpi_device_sleep_wake(adev, target_state, wakeup); + if (wakeup && error) + return error; + + error = acpi_dev_pm_low_power(dev, adev, target_state); + if (error) + __acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false); + + return error; +} +EXPORT_SYMBOL_GPL(acpi_dev_suspend_late); + +/** + * acpi_dev_resume_early - Put device into the full-power state using ACPI. + * @dev: Device to put into the full-power state. + * + * Put the given device into the full-power state using the standard ACPI + * mechanism during system transition to the working state. Set the power + * state of the device to ACPI D0 and disable remote wakeup. + */ +int acpi_dev_resume_early(struct device *dev) +{ + struct acpi_device *adev = acpi_dev_pm_get_node(dev); + int error; + + if (!adev) + return 0; + + error = acpi_dev_pm_full_power(adev); + __acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false); + return error; +} +EXPORT_SYMBOL_GPL(acpi_dev_resume_early); + +/** + * acpi_subsys_prepare - Prepare device for system transition to a sleep state. + * @dev: Device to prepare. + */ +int acpi_subsys_prepare(struct device *dev) +{ + /* + * Follow PCI and resume devices suspended at run time before running + * their system suspend callbacks. + */ + pm_runtime_resume(dev); + return pm_generic_prepare(dev); +} +EXPORT_SYMBOL_GPL(acpi_subsys_prepare); + +/** + * acpi_subsys_suspend_late - Suspend device using ACPI. + * @dev: Device to suspend. + * + * Carry out the generic late suspend procedure for @dev and use ACPI to put + * it into a low-power state during system transition into a sleep state. + */ +int acpi_subsys_suspend_late(struct device *dev) +{ + int ret = pm_generic_suspend_late(dev); + return ret ? ret : acpi_dev_suspend_late(dev); +} +EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late); + +/** + * acpi_subsys_resume_early - Resume device using ACPI. + * @dev: Device to Resume. + * + * Use ACPI to put the given device into the full-power state and carry out the + * generic early resume procedure for it during system transition into the + * working state. + */ +int acpi_subsys_resume_early(struct device *dev) +{ + int ret = acpi_dev_resume_early(dev); + return ret ? ret : pm_generic_resume_early(dev); +} +EXPORT_SYMBOL_GPL(acpi_subsys_resume_early); +#endif /* CONFIG_PM_SLEEP */ + +static struct dev_pm_domain acpi_general_pm_domain = { + .ops = { +#ifdef CONFIG_PM_RUNTIME + .runtime_suspend = acpi_subsys_runtime_suspend, + .runtime_resume = acpi_subsys_runtime_resume, + .runtime_idle = pm_generic_runtime_idle, +#endif +#ifdef CONFIG_PM_SLEEP + .prepare = acpi_subsys_prepare, + .suspend_late = acpi_subsys_suspend_late, + .resume_early = acpi_subsys_resume_early, + .poweroff_late = acpi_subsys_suspend_late, + .restore_early = acpi_subsys_resume_early, +#endif + }, +}; + +/** + * acpi_dev_pm_attach - Prepare device for ACPI power management. + * @dev: Device to prepare. + * @power_on: Whether or not to power on the device. + * + * If @dev has a valid ACPI handle that has a valid struct acpi_device object + * attached to it, install a wakeup notification handler for the device and + * add it to the general ACPI PM domain. If @power_on is set, the device will + * be put into the ACPI D0 state before the function returns. + * + * This assumes that the @dev's bus type uses generic power management callbacks + * (or doesn't use any power management callbacks at all). + * + * Callers must ensure proper synchronization of this function with power + * management callbacks. + */ +int acpi_dev_pm_attach(struct device *dev, bool power_on) +{ + struct acpi_device *adev = acpi_dev_pm_get_node(dev); + + if (!adev) + return -ENODEV; + + if (dev->pm_domain) + return -EEXIST; + + acpi_add_pm_notifier(adev, acpi_wakeup_device, dev); + dev->pm_domain = &acpi_general_pm_domain; + if (power_on) { + acpi_dev_pm_full_power(adev); + __acpi_device_run_wake(adev, false); + } + return 0; +} +EXPORT_SYMBOL_GPL(acpi_dev_pm_attach); + +/** + * acpi_dev_pm_detach - Remove ACPI power management from the device. + * @dev: Device to take care of. + * @power_off: Whether or not to try to remove power from the device. + * + * Remove the device from the general ACPI PM domain and remove its wakeup + * notifier. If @power_off is set, additionally remove power from the device if + * possible. + * + * Callers must ensure proper synchronization of this function with power + * management callbacks. + */ +void acpi_dev_pm_detach(struct device *dev, bool power_off) +{ + struct acpi_device *adev = acpi_dev_pm_get_node(dev); + + if (adev && dev->pm_domain == &acpi_general_pm_domain) { + dev->pm_domain = NULL; + acpi_remove_pm_notifier(adev, acpi_wakeup_device); + if (power_off) { + /* + * If the device's PM QoS resume latency limit or flags + * have been exposed to user space, they have to be + * hidden at this point, so that they don't affect the + * choice of the low-power state to put the device into. + */ + dev_pm_qos_hide_latency_limit(dev); + dev_pm_qos_hide_flags(dev); + __acpi_device_run_wake(adev, false); + acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0); + } + } +} +EXPORT_SYMBOL_GPL(acpi_dev_pm_detach); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 671bbe6..d59a607 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1006,8 +1006,10 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) * D3hot is only valid if _PR3 present. */ if (ps->resources.count || - (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) + (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) { ps->flags.valid = 1; + ps->flags.os_accessible = 1; + } ps->power = -1; /* Unknown - driver assigned */ ps->latency = -1; /* Unknown - driver assigned */ @@ -1023,6 +1025,11 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set) device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1; + /* Presence of _PS3 or _PRx means we can put the device into D3 cold */ + if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set || + device->power.flags.power_resources) + device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1; + acpi_bus_init_power(device); return 0; diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index fdcdbb6..13a285d 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -18,7 +18,6 @@ #include <linux/reboot.h> #include <linux/acpi.h> #include <linux/module.h> -#include <linux/pm_runtime.h> #include <asm/io.h> @@ -81,6 +80,12 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +u32 acpi_target_system_state(void) +{ + return acpi_target_sleep_state; +} + static bool pwr_btn_event_pending; /* @@ -681,177 +686,6 @@ int acpi_suspend(u32 acpi_state) return -EINVAL; } -#ifdef CONFIG_PM -/** - * acpi_pm_device_sleep_state - return preferred power state of ACPI device - * in the system sleep state given by %acpi_target_sleep_state - * @dev: device to examine; its driver model wakeup flags control - * whether it should be able to wake up the system - * @d_min_p: used to store the upper limit of allowed states range - * @d_max_in: specify the lowest allowed states - * Return value: preferred power state of the device on success, -ENODEV - * (ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure - * - * Find the lowest power (highest number) ACPI device power state that - * device @dev can be in while the system is in the sleep state represented - * by %acpi_target_sleep_state. If @wake is nonzero, the device should be - * able to wake up the system from this sleep state. If @d_min_p is set, - * the highest power (lowest number) device power state of @dev allowed - * in this system sleep state is stored at the location pointed to by it. - * - * The caller must ensure that @dev is valid before using this function. - * The caller is also responsible for figuring out if the device is - * supposed to be able to wake up the system and passing this information - * via @wake. - */ - -int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) -{ - acpi_handle handle = DEVICE_ACPI_HANDLE(dev); - struct acpi_device *adev; - char acpi_method[] = "_SxD"; - unsigned long long d_min, d_max; - - if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3) - return -EINVAL; - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - printk(KERN_DEBUG "ACPI handle has no context!\n"); - return -ENODEV; - } - - acpi_method[2] = '0' + acpi_target_sleep_state; - /* - * If the sleep state is S0, the lowest limit from ACPI is D3, - * but if the device has _S0W, we will use the value from _S0W - * as the lowest limit from ACPI. Finally, we will constrain - * the lowest limit with the specified one. - */ - d_min = ACPI_STATE_D0; - d_max = ACPI_STATE_D3; - - /* - * If present, _SxD methods return the minimum D-state (highest power - * state) we can use for the corresponding S-states. Otherwise, the - * minimum D-state is D0 (ACPI 3.x). - * - * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer - * provided -- that's our fault recovery, we ignore retval. - */ - if (acpi_target_sleep_state > ACPI_STATE_S0) - acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); - - /* - * If _PRW says we can wake up the system from the target sleep state, - * the D-state returned by _SxD is sufficient for that (we assume a - * wakeup-aware driver if wake is set). Still, if _SxW exists - * (ACPI 3.x), it should return the maximum (lowest power) D-state that - * can wake the system. _S0W may be valid, too. - */ - if (acpi_target_sleep_state == ACPI_STATE_S0 || - (device_may_wakeup(dev) && adev->wakeup.flags.valid && - adev->wakeup.sleep_state >= acpi_target_sleep_state)) { - acpi_status status; - - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(handle, acpi_method, NULL, - &d_max); - if (ACPI_FAILURE(status)) { - if (acpi_target_sleep_state != ACPI_STATE_S0 || - status != AE_NOT_FOUND) - d_max = d_min; - } else if (d_max < d_min) { - /* Warn the user of the broken DSDT */ - printk(KERN_WARNING "ACPI: Wrong value from %s\n", - acpi_method); - /* Sanitize it */ - d_min = d_max; - } - } - - if (d_max_in < d_min) - return -EINVAL; - if (d_min_p) - *d_min_p = d_min; - /* constrain d_max with specified lowest limit (max number) */ - if (d_max > d_max_in) { - for (d_max = d_max_in; d_max > d_min; d_max--) { - if (adev->power.states[d_max].flags.valid) - break; - } - } - return d_max; -} -EXPORT_SYMBOL(acpi_pm_device_sleep_state); -#endif /* CONFIG_PM */ - -#ifdef CONFIG_PM_SLEEP -/** - * acpi_pm_device_run_wake - Enable/disable wake-up for given device. - * @phys_dev: Device to enable/disable the platform to wake-up the system for. - * @enable: Whether enable or disable the wake-up functionality. - * - * Find the ACPI device object corresponding to @pci_dev and try to - * enable/disable the GPE associated with it. - */ -int acpi_pm_device_run_wake(struct device *phys_dev, bool enable) -{ - struct acpi_device *dev; - acpi_handle handle; - - if (!device_run_wake(phys_dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(phys_dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { - dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", - __func__); - return -ENODEV; - } - - if (enable) { - acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); - acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - } else { - acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - acpi_disable_wakeup_device_power(dev); - } - - return 0; -} -EXPORT_SYMBOL(acpi_pm_device_run_wake); - -/** - * acpi_pm_device_sleep_wake - enable or disable the system wake-up - * capability of given device - * @dev: device to handle - * @enable: 'true' - enable, 'false' - disable the wake-up capability - */ -int acpi_pm_device_sleep_wake(struct device *dev, bool enable) -{ - acpi_handle handle; - struct acpi_device *adev; - int error; - - if (!device_can_wakeup(dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__); - return -ENODEV; - } - - error = enable ? - acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : - acpi_disable_wakeup_device_power(adev); - if (!error) - dev_info(dev, "wake-up capability %s by ACPI\n", - enable ? "enabled" : "disabled"); - - return error; -} -#endif /* CONFIG_PM_SLEEP */ - static void acpi_power_off_prepare(void) { /* Prepare to power off the system */ diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 96b71b6..acc3a8d 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -470,10 +470,19 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd) return -EBUSY; not_suspended = 0; - list_for_each_entry(pdd, &genpd->dev_list, list_node) + list_for_each_entry(pdd, &genpd->dev_list, list_node) { + enum pm_qos_flags_status stat; + + stat = dev_pm_qos_flags(pdd->dev, + PM_QOS_FLAG_NO_POWER_OFF + | PM_QOS_FLAG_REMOTE_WAKEUP); + if (stat > PM_QOS_FLAGS_NONE) + return -EBUSY; + if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev) || pdd->dev->power.irq_safe)) not_suspended++; + } if (not_suspended > genpd->in_progress) return -EBUSY; diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 0dbfdf4..b16686a 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -93,8 +93,10 @@ extern void dpm_sysfs_remove(struct device *dev); extern void rpm_sysfs_remove(struct device *dev); extern int wakeup_sysfs_add(struct device *dev); extern void wakeup_sysfs_remove(struct device *dev); -extern int pm_qos_sysfs_add(struct device *dev); -extern void pm_qos_sysfs_remove(struct device *dev); +extern int pm_qos_sysfs_add_latency(struct device *dev); +extern void pm_qos_sysfs_remove_latency(struct device *dev); +extern int pm_qos_sysfs_add_flags(struct device *dev); +extern void pm_qos_sysfs_remove_flags(struct device *dev); #else /* CONFIG_PM */ diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 74a67e0..fdc3894 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -40,6 +40,7 @@ #include <linux/device.h> #include <linux/mutex.h> #include <linux/export.h> +#include <linux/pm_runtime.h> #include "power.h" @@ -48,6 +49,50 @@ static DEFINE_MUTEX(dev_pm_qos_mtx); static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers); /** + * __dev_pm_qos_flags - Check PM QoS flags for a given device. + * @dev: Device to check the PM QoS flags for. + * @mask: Flags to check against. + * + * This routine must be called with dev->power.lock held. + */ +enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask) +{ + struct dev_pm_qos *qos = dev->power.qos; + struct pm_qos_flags *pqf; + s32 val; + + if (!qos) + return PM_QOS_FLAGS_UNDEFINED; + + pqf = &qos->flags; + if (list_empty(&pqf->list)) + return PM_QOS_FLAGS_UNDEFINED; + + val = pqf->effective_flags & mask; + if (val) + return (val == mask) ? PM_QOS_FLAGS_ALL : PM_QOS_FLAGS_SOME; + + return PM_QOS_FLAGS_NONE; +} + +/** + * dev_pm_qos_flags - Check PM QoS flags for a given device (locked). + * @dev: Device to check the PM QoS flags for. + * @mask: Flags to check against. + */ +enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask) +{ + unsigned long irqflags; + enum pm_qos_flags_status ret; + + spin_lock_irqsave(&dev->power.lock, irqflags); + ret = __dev_pm_qos_flags(dev, mask); + spin_unlock_irqrestore(&dev->power.lock, irqflags); + + return ret; +} + +/** * __dev_pm_qos_read_value - Get PM QoS constraint for a given device. * @dev: Device to get the PM QoS constraint value for. * @@ -55,9 +100,7 @@ static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers); */ s32 __dev_pm_qos_read_value(struct device *dev) { - struct pm_qos_constraints *c = dev->power.constraints; - - return c ? pm_qos_read_value(c) : 0; + return dev->power.qos ? pm_qos_read_value(&dev->power.qos->latency) : 0; } /** @@ -76,30 +119,39 @@ s32 dev_pm_qos_read_value(struct device *dev) return ret; } -/* - * apply_constraint - * @req: constraint request to apply - * @action: action to perform add/update/remove, of type enum pm_qos_req_action - * @value: defines the qos request +/** + * apply_constraint - Add/modify/remove device PM QoS request. + * @req: Constraint request to apply + * @action: Action to perform (add/update/remove). + * @value: Value to assign to the QoS request. * * Internal function to update the constraints list using the PM QoS core * code and if needed call the per-device and the global notification * callbacks */ static int apply_constraint(struct dev_pm_qos_request *req, - enum pm_qos_req_action action, int value) + enum pm_qos_req_action action, s32 value) { - int ret, curr_value; - - ret = pm_qos_update_target(req->dev->power.constraints, - &req->node, action, value); + struct dev_pm_qos *qos = req->dev->power.qos; + int ret; - if (ret) { - /* Call the global callbacks if needed */ - curr_value = pm_qos_read_value(req->dev->power.constraints); - blocking_notifier_call_chain(&dev_pm_notifiers, - (unsigned long)curr_value, - req); + switch(req->type) { + case DEV_PM_QOS_LATENCY: + ret = pm_qos_update_target(&qos->latency, &req->data.pnode, + action, value); + if (ret) { + value = pm_qos_read_value(&qos->latency); + blocking_notifier_call_chain(&dev_pm_notifiers, + (unsigned long)value, + req); + } + break; + case DEV_PM_QOS_FLAGS: + ret = pm_qos_update_flags(&qos->flags, &req->data.flr, + action, value); + break; + default: + ret = -EINVAL; } return ret; @@ -114,28 +166,32 @@ static int apply_constraint(struct dev_pm_qos_request *req, */ static int dev_pm_qos_constraints_allocate(struct device *dev) { + struct dev_pm_qos *qos; struct pm_qos_constraints *c; struct blocking_notifier_head *n; - c = kzalloc(sizeof(*c), GFP_KERNEL); - if (!c) + qos = kzalloc(sizeof(*qos), GFP_KERNEL); + if (!qos) return -ENOMEM; n = kzalloc(sizeof(*n), GFP_KERNEL); if (!n) { - kfree(c); + kfree(qos); return -ENOMEM; } BLOCKING_INIT_NOTIFIER_HEAD(n); + c = &qos->latency; plist_head_init(&c->list); c->target_value = PM_QOS_DEV_LAT_DEFAULT_VALUE; c->default_value = PM_QOS_DEV_LAT_DEFAULT_VALUE; c->type = PM_QOS_MIN; c->notifiers = n; + INIT_LIST_HEAD(&qos->flags.list); + spin_lock_irq(&dev->power.lock); - dev->power.constraints = c; + dev->power.qos = qos; spin_unlock_irq(&dev->power.lock); return 0; @@ -151,7 +207,7 @@ static int dev_pm_qos_constraints_allocate(struct device *dev) void dev_pm_qos_constraints_init(struct device *dev) { mutex_lock(&dev_pm_qos_mtx); - dev->power.constraints = NULL; + dev->power.qos = NULL; dev->power.power_state = PMSG_ON; mutex_unlock(&dev_pm_qos_mtx); } @@ -164,6 +220,7 @@ void dev_pm_qos_constraints_init(struct device *dev) */ void dev_pm_qos_constraints_destroy(struct device *dev) { + struct dev_pm_qos *qos; struct dev_pm_qos_request *req, *tmp; struct pm_qos_constraints *c; @@ -176,12 +233,13 @@ void dev_pm_qos_constraints_destroy(struct device *dev) mutex_lock(&dev_pm_qos_mtx); dev->power.power_state = PMSG_INVALID; - c = dev->power.constraints; - if (!c) + qos = dev->power.qos; + if (!qos) goto out; + c = &qos->latency; /* Flush the constraints list for the device */ - plist_for_each_entry_safe(req, tmp, &c->list, node) { + plist_for_each_entry_safe(req, tmp, &c->list, data.pnode) { /* * Update constraints list and call the notification * callbacks if needed @@ -191,11 +249,11 @@ void dev_pm_qos_constraints_destroy(struct device *dev) } spin_lock_irq(&dev->power.lock); - dev->power.constraints = NULL; + dev->power.qos = NULL; spin_unlock_irq(&dev->power.lock); kfree(c->notifiers); - kfree(c); + kfree(qos); out: mutex_unlock(&dev_pm_qos_mtx); @@ -205,6 +263,7 @@ void dev_pm_qos_constraints_destroy(struct device *dev) * dev_pm_qos_add_request - inserts new qos request into the list * @dev: target device for the constraint * @req: pointer to a preallocated handle + * @type: type of the request * @value: defines the qos request * * This function inserts a new entry in the device constraints list of @@ -218,9 +277,12 @@ void dev_pm_qos_constraints_destroy(struct device *dev) * -EINVAL in case of wrong parameters, -ENOMEM if there's not enough memory * to allocate for data structures, -ENODEV if the device has just been removed * from the system. + * + * Callers should ensure that the target device is not RPM_SUSPENDED before + * using this function for requests of type DEV_PM_QOS_FLAGS. */ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, - s32 value) + enum dev_pm_qos_req_type type, s32 value) { int ret = 0; @@ -235,7 +297,7 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, mutex_lock(&dev_pm_qos_mtx); - if (!dev->power.constraints) { + if (!dev->power.qos) { if (dev->power.power_state.event == PM_EVENT_INVALID) { /* The device has been removed from the system. */ req->dev = NULL; @@ -251,8 +313,10 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, } } - if (!ret) + if (!ret) { + req->type = type; ret = apply_constraint(req, PM_QOS_ADD_REQ, value); + } out: mutex_unlock(&dev_pm_qos_mtx); @@ -262,6 +326,37 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, EXPORT_SYMBOL_GPL(dev_pm_qos_add_request); /** + * __dev_pm_qos_update_request - Modify an existing device PM QoS request. + * @req : PM QoS request to modify. + * @new_value: New value to request. + */ +static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req, + s32 new_value) +{ + s32 curr_value; + int ret = 0; + + if (!req->dev->power.qos) + return -ENODEV; + + switch(req->type) { + case DEV_PM_QOS_LATENCY: + curr_value = req->data.pnode.prio; + break; + case DEV_PM_QOS_FLAGS: + curr_value = req->data.flr.flags; + break; + default: + return -EINVAL; + } + + if (curr_value != new_value) + ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value); + + return ret; +} + +/** * dev_pm_qos_update_request - modifies an existing qos request * @req : handle to list element holding a dev_pm_qos request to use * @new_value: defines the qos request @@ -275,11 +370,13 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_add_request); * 0 if the aggregated constraint value has not changed, * -EINVAL in case of wrong parameters, -ENODEV if the device has been * removed from the system + * + * Callers should ensure that the target device is not RPM_SUSPENDED before + * using this function for requests of type DEV_PM_QOS_FLAGS. */ -int dev_pm_qos_update_request(struct dev_pm_qos_request *req, - s32 new_value) +int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value) { - int ret = 0; + int ret; if (!req) /*guard against callers passing in null */ return -EINVAL; @@ -289,17 +386,9 @@ int dev_pm_qos_update_request(struct dev_pm_qos_request *req, return -EINVAL; mutex_lock(&dev_pm_qos_mtx); - - if (req->dev->power.constraints) { - if (new_value != req->node.prio) - ret = apply_constraint(req, PM_QOS_UPDATE_REQ, - new_value); - } else { - /* Return if the device has been removed */ - ret = -ENODEV; - } - + ret = __dev_pm_qos_update_request(req, new_value); mutex_unlock(&dev_pm_qos_mtx); + return ret; } EXPORT_SYMBOL_GPL(dev_pm_qos_update_request); @@ -315,6 +404,9 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_update_request); * 0 if the aggregated constraint value has not changed, * -EINVAL in case of wrong parameters, -ENODEV if the device has been * removed from the system + * + * Callers should ensure that the target device is not RPM_SUSPENDED before + * using this function for requests of type DEV_PM_QOS_FLAGS. */ int dev_pm_qos_remove_request(struct dev_pm_qos_request *req) { @@ -329,7 +421,7 @@ int dev_pm_qos_remove_request(struct dev_pm_qos_request *req) mutex_lock(&dev_pm_qos_mtx); - if (req->dev->power.constraints) { + if (req->dev->power.qos) { ret = apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE); memset(req, 0, sizeof(*req)); @@ -362,13 +454,13 @@ int dev_pm_qos_add_notifier(struct device *dev, struct notifier_block *notifier) mutex_lock(&dev_pm_qos_mtx); - if (!dev->power.constraints) + if (!dev->power.qos) ret = dev->power.power_state.event != PM_EVENT_INVALID ? dev_pm_qos_constraints_allocate(dev) : -ENODEV; if (!ret) ret = blocking_notifier_chain_register( - dev->power.constraints->notifiers, notifier); + dev->power.qos->latency.notifiers, notifier); mutex_unlock(&dev_pm_qos_mtx); return ret; @@ -393,9 +485,9 @@ int dev_pm_qos_remove_notifier(struct device *dev, mutex_lock(&dev_pm_qos_mtx); /* Silently return if the constraints object is not present. */ - if (dev->power.constraints) + if (dev->power.qos) retval = blocking_notifier_chain_unregister( - dev->power.constraints->notifiers, + dev->power.qos->latency.notifiers, notifier); mutex_unlock(&dev_pm_qos_mtx); @@ -449,7 +541,8 @@ int dev_pm_qos_add_ancestor_request(struct device *dev, ancestor = ancestor->parent; if (ancestor) - error = dev_pm_qos_add_request(ancestor, req, value); + error = dev_pm_qos_add_request(ancestor, req, + DEV_PM_QOS_LATENCY, value); if (error) req->dev = NULL; @@ -459,10 +552,19 @@ int dev_pm_qos_add_ancestor_request(struct device *dev, EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request); #ifdef CONFIG_PM_RUNTIME -static void __dev_pm_qos_drop_user_request(struct device *dev) +static void __dev_pm_qos_drop_user_request(struct device *dev, + enum dev_pm_qos_req_type type) { - dev_pm_qos_remove_request(dev->power.pq_req); - dev->power.pq_req = NULL; + switch(type) { + case DEV_PM_QOS_LATENCY: + dev_pm_qos_remove_request(dev->power.qos->latency_req); + dev->power.qos->latency_req = NULL; + break; + case DEV_PM_QOS_FLAGS: + dev_pm_qos_remove_request(dev->power.qos->flags_req); + dev->power.qos->flags_req = NULL; + break; + } } /** @@ -478,21 +580,21 @@ int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value) if (!device_is_registered(dev) || value < 0) return -EINVAL; - if (dev->power.pq_req) + if (dev->power.qos && dev->power.qos->latency_req) return -EEXIST; req = kzalloc(sizeof(*req), GFP_KERNEL); if (!req) return -ENOMEM; - ret = dev_pm_qos_add_request(dev, req, value); + ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_LATENCY, value); if (ret < 0) return ret; - dev->power.pq_req = req; - ret = pm_qos_sysfs_add(dev); + dev->power.qos->latency_req = req; + ret = pm_qos_sysfs_add_latency(dev); if (ret) - __dev_pm_qos_drop_user_request(dev); + __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY); return ret; } @@ -504,10 +606,92 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit); */ void dev_pm_qos_hide_latency_limit(struct device *dev) { - if (dev->power.pq_req) { - pm_qos_sysfs_remove(dev); - __dev_pm_qos_drop_user_request(dev); + if (dev->power.qos && dev->power.qos->latency_req) { + pm_qos_sysfs_remove_latency(dev); + __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY); } } EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit); + +/** + * dev_pm_qos_expose_flags - Expose PM QoS flags of a device to user space. + * @dev: Device whose PM QoS flags are to be exposed to user space. + * @val: Initial values of the flags. + */ +int dev_pm_qos_expose_flags(struct device *dev, s32 val) +{ + struct dev_pm_qos_request *req; + int ret; + + if (!device_is_registered(dev)) + return -EINVAL; + + if (dev->power.qos && dev->power.qos->flags_req) + return -EEXIST; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return -ENOMEM; + + pm_runtime_get_sync(dev); + ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_FLAGS, val); + if (ret < 0) + goto fail; + + dev->power.qos->flags_req = req; + ret = pm_qos_sysfs_add_flags(dev); + if (ret) + __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS); + +fail: + pm_runtime_put(dev); + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_qos_expose_flags); + +/** + * dev_pm_qos_hide_flags - Hide PM QoS flags of a device from user space. + * @dev: Device whose PM QoS flags are to be hidden from user space. + */ +void dev_pm_qos_hide_flags(struct device *dev) +{ + if (dev->power.qos && dev->power.qos->flags_req) { + pm_qos_sysfs_remove_flags(dev); + pm_runtime_get_sync(dev); + __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS); + pm_runtime_put(dev); + } +} +EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags); + +/** + * dev_pm_qos_update_flags - Update PM QoS flags request owned by user space. + * @dev: Device to update the PM QoS flags request for. + * @mask: Flags to set/clear. + * @set: Whether to set or clear the flags (true means set). + */ +int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set) +{ + s32 value; + int ret; + + if (!dev->power.qos || !dev->power.qos->flags_req) + return -EINVAL; + + pm_runtime_get_sync(dev); + mutex_lock(&dev_pm_qos_mtx); + + value = dev_pm_qos_requested_flags(dev); + if (set) + value |= mask; + else + value &= ~mask; + + ret = __dev_pm_qos_update_request(dev->power.qos->flags_req, value); + + mutex_unlock(&dev_pm_qos_mtx); + pm_runtime_put(dev); + + return ret; +} #endif /* CONFIG_PM_RUNTIME */ diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index b91dc6f..50d16e3 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -221,7 +221,7 @@ static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show, static ssize_t pm_qos_latency_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%d\n", dev->power.pq_req->node.prio); + return sprintf(buf, "%d\n", dev_pm_qos_requested_latency(dev)); } static ssize_t pm_qos_latency_store(struct device *dev, @@ -237,12 +237,66 @@ static ssize_t pm_qos_latency_store(struct device *dev, if (value < 0) return -EINVAL; - ret = dev_pm_qos_update_request(dev->power.pq_req, value); + ret = dev_pm_qos_update_request(dev->power.qos->latency_req, value); return ret < 0 ? ret : n; } static DEVICE_ATTR(pm_qos_resume_latency_us, 0644, pm_qos_latency_show, pm_qos_latency_store); + +static ssize_t pm_qos_no_power_off_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev) + & PM_QOS_FLAG_NO_POWER_OFF)); +} + +static ssize_t pm_qos_no_power_off_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t n) +{ + int ret; + + if (kstrtoint(buf, 0, &ret)) + return -EINVAL; + + if (ret != 0 && ret != 1) + return -EINVAL; + + ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret); + return ret < 0 ? ret : n; +} + +static DEVICE_ATTR(pm_qos_no_power_off, 0644, + pm_qos_no_power_off_show, pm_qos_no_power_off_store); + +static ssize_t pm_qos_remote_wakeup_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev) + & PM_QOS_FLAG_REMOTE_WAKEUP)); +} + +static ssize_t pm_qos_remote_wakeup_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t n) +{ + int ret; + + if (kstrtoint(buf, 0, &ret)) + return -EINVAL; + + if (ret != 0 && ret != 1) + return -EINVAL; + + ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP, ret); + return ret < 0 ? ret : n; +} + +static DEVICE_ATTR(pm_qos_remote_wakeup, 0644, + pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store); #endif /* CONFIG_PM_RUNTIME */ #ifdef CONFIG_PM_SLEEP @@ -564,15 +618,27 @@ static struct attribute_group pm_runtime_attr_group = { .attrs = runtime_attrs, }; -static struct attribute *pm_qos_attrs[] = { +static struct attribute *pm_qos_latency_attrs[] = { #ifdef CONFIG_PM_RUNTIME &dev_attr_pm_qos_resume_latency_us.attr, #endif /* CONFIG_PM_RUNTIME */ NULL, }; -static struct attribute_group pm_qos_attr_group = { +static struct attribute_group pm_qos_latency_attr_group = { .name = power_group_name, - .attrs = pm_qos_attrs, + .attrs = pm_qos_latency_attrs, +}; + +static struct attribute *pm_qos_flags_attrs[] = { +#ifdef CONFIG_PM_RUNTIME + &dev_attr_pm_qos_no_power_off.attr, + &dev_attr_pm_qos_remote_wakeup.attr, +#endif /* CONFIG_PM_RUNTIME */ + NULL, +}; +static struct attribute_group pm_qos_flags_attr_group = { + .name = power_group_name, + .attrs = pm_qos_flags_attrs, }; int dpm_sysfs_add(struct device *dev) @@ -615,14 +681,24 @@ void wakeup_sysfs_remove(struct device *dev) sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group); } -int pm_qos_sysfs_add(struct device *dev) +int pm_qos_sysfs_add_latency(struct device *dev) +{ + return sysfs_merge_group(&dev->kobj, &pm_qos_latency_attr_group); +} + +void pm_qos_sysfs_remove_latency(struct device *dev) +{ + sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_attr_group); +} + +int pm_qos_sysfs_add_flags(struct device *dev) { - return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group); + return sysfs_merge_group(&dev->kobj, &pm_qos_flags_attr_group); } -void pm_qos_sysfs_remove(struct device *dev) +void pm_qos_sysfs_remove_flags(struct device *dev) { - sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group); + sysfs_unmerge_group(&dev->kobj, &pm_qos_flags_attr_group); } void rpm_sysfs_remove(struct device *dev) diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 4fbfe96..f48ac5d 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -727,7 +727,9 @@ static void flctl_select_chip(struct mtd_info *mtd, int chipnr) if (!flctl->qos_request) { ret = dev_pm_qos_add_request(&flctl->pdev->dev, - &flctl->pm_qos, 100); + &flctl->pm_qos, + DEV_PM_QOS_LATENCY, + 100); if (ret < 0) dev_err(&flctl->pdev->dev, "PM QoS request failed: %d\n", ret); diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index c5792d6..1af4008 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -17,10 +17,9 @@ #include <linux/pci-acpi.h> #include <linux/pm_runtime.h> +#include <linux/pm_qos.h> #include "pci.h" -static DEFINE_MUTEX(pci_acpi_pm_notify_mtx); - /** * pci_acpi_wake_bus - Wake-up notification handler for root buses. * @handle: ACPI handle of a device the notification is for. @@ -68,67 +67,6 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) } /** - * add_pm_notifier - Register PM notifier for given ACPI device. - * @dev: ACPI device to add the notifier for. - * @context: PCI device or bus to check for PME status if an event is signaled. - * - * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of - * PM wake-up events. For example, wake-up events may be generated for bridges - * if one of the devices below the bridge is signaling PME, even if the bridge - * itself doesn't have a wake-up GPE associated with it. - */ -static acpi_status add_pm_notifier(struct acpi_device *dev, - acpi_notify_handler handler, - void *context) -{ - acpi_status status = AE_ALREADY_EXISTS; - - mutex_lock(&pci_acpi_pm_notify_mtx); - - if (dev->wakeup.flags.notifier_present) - goto out; - - status = acpi_install_notify_handler(dev->handle, - ACPI_SYSTEM_NOTIFY, - handler, context); - if (ACPI_FAILURE(status)) - goto out; - - dev->wakeup.flags.notifier_present = true; - - out: - mutex_unlock(&pci_acpi_pm_notify_mtx); - return status; -} - -/** - * remove_pm_notifier - Unregister PM notifier from given ACPI device. - * @dev: ACPI device to remove the notifier from. - */ -static acpi_status remove_pm_notifier(struct acpi_device *dev, - acpi_notify_handler handler) -{ - acpi_status status = AE_BAD_PARAMETER; - - mutex_lock(&pci_acpi_pm_notify_mtx); - - if (!dev->wakeup.flags.notifier_present) - goto out; - - status = acpi_remove_notify_handler(dev->handle, - ACPI_SYSTEM_NOTIFY, - handler); - if (ACPI_FAILURE(status)) - goto out; - - dev->wakeup.flags.notifier_present = false; - - out: - mutex_unlock(&pci_acpi_pm_notify_mtx); - return status; -} - -/** * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus. * @dev: ACPI device to add the notifier for. * @pci_bus: PCI bus to walk checking for PME status if an event is signaled. @@ -136,7 +74,7 @@ static acpi_status remove_pm_notifier(struct acpi_device *dev, acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, struct pci_bus *pci_bus) { - return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus); + return acpi_add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus); } /** @@ -145,7 +83,7 @@ acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, */ acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev) { - return remove_pm_notifier(dev, pci_acpi_wake_bus); + return acpi_remove_pm_notifier(dev, pci_acpi_wake_bus); } /** @@ -156,7 +94,7 @@ acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev) acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, struct pci_dev *pci_dev) { - return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev); + return acpi_add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev); } /** @@ -165,7 +103,7 @@ acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, */ acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev) { - return remove_pm_notifier(dev, pci_acpi_wake_dev); + return acpi_remove_pm_notifier(dev, pci_acpi_wake_dev); } phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle) @@ -257,11 +195,16 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) return -ENODEV; switch (state) { + case PCI_D3cold: + if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) == + PM_QOS_FLAGS_ALL) { + error = -EBUSY; + break; + } case PCI_D0: case PCI_D1: case PCI_D2: case PCI_D3hot: - case PCI_D3cold: error = acpi_bus_set_power(handle, state_conv[state]); } |