diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/staging/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/staging/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/sep/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/staging/sep/Makefile | 2 | ||||
| -rw-r--r-- | drivers/staging/sep/TODO | 12 | ||||
| -rw-r--r-- | drivers/staging/sep/sep_dev.h | 156 | ||||
| -rw-r--r-- | drivers/staging/sep/sep_driver.c | 4152 | ||||
| -rw-r--r-- | drivers/staging/sep/sep_driver_api.h | 309 | ||||
| -rw-r--r-- | drivers/staging/sep/sep_driver_config.h | 428 | ||||
| -rw-r--r-- | drivers/staging/sep/sep_driver_hw_defs.h | 234 |
10 files changed, 5307 insertions, 0 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 49aee27..1f61914 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -119,6 +119,8 @@ source "drivers/staging/vme/Kconfig" source "drivers/staging/memrar/Kconfig" +source "drivers/staging/sep/Kconfig" + source "drivers/staging/iio/Kconfig" source "drivers/staging/zram/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 20c5641..75c0c1f 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_FB_UDL) += udlfb/ obj-$(CONFIG_HYPERV) += hv/ obj-$(CONFIG_VME_BUS) += vme/ obj-$(CONFIG_MRST_RAR_HANDLER) += memrar/ +obj-$(CONFIG_DX_SEP) += sep/ obj-$(CONFIG_IIO) += iio/ obj-$(CONFIG_ZRAM) += zram/ obj-$(CONFIG_WLAGS49_H2) += wlags49_h2/ diff --git a/drivers/staging/sep/Kconfig b/drivers/staging/sep/Kconfig new file mode 100644 index 0000000..34f3ef5 --- /dev/null +++ b/drivers/staging/sep/Kconfig @@ -0,0 +1,11 @@ +config DX_SEP + tristate "Discretix SEP driver" + depends on PCI + default y + help + Discretix SEP driver; used for the security processor subsystem + on bard the Intel Mobile Internet Device. + + The driver's name is sep_driver. + + If unsure, select N. diff --git a/drivers/staging/sep/Makefile b/drivers/staging/sep/Makefile new file mode 100644 index 0000000..628d5f9 --- /dev/null +++ b/drivers/staging/sep/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_DX_SEP) := sep_driver.o + diff --git a/drivers/staging/sep/TODO b/drivers/staging/sep/TODO new file mode 100644 index 0000000..371ee27 --- /dev/null +++ b/drivers/staging/sep/TODO @@ -0,0 +1,12 @@ +Todo's so far (from Alan Cox) +- Fix firmware loading - Done 09/10 M. Allyn +- Get firmware into firmware git tree - Firmware is non open source +- Review and tidy each algorithm function - Done 09/10 M. Allyn +- Check whether it can be plugged into any of the kernel crypto API + interfaces - Crypto API 'glue' is still not ready to submit +- Do something about the magic shared memory interface and replace it + with something saner (in Linux terms) - Done 09/10 M. Allyn +- Clean up unused ioctls - Needs vendor help +- Clean up unused fields in ioctl structures - Needs vendor help +- 64 bit size to be used for all user space addresses passed + to ioctl - Done 10/10 M. Allyn diff --git a/drivers/staging/sep/sep_dev.h b/drivers/staging/sep/sep_dev.h new file mode 100644 index 0000000..7b4993b --- /dev/null +++ b/drivers/staging/sep/sep_dev.h @@ -0,0 +1,156 @@ +#ifndef __SEP_DEV_H__ +#define __SEP_DEV_H__ + +/* + * + * sep_dev.h - Security Processor Device Structures + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES + * 2010.09.14 upgrade to Medfield + */ + +struct sep_device { + /* pointer to pci dev */ + struct pci_dev *pdev; + + /* character device file */ + struct cdev sep_cdev; + struct cdev sep_daemon_cdev; + struct cdev sep_singleton_cdev; + + /* devices (using misc dev) */ + struct miscdevice miscdev_sep; + struct miscdevice miscdev_singleton; + struct miscdevice miscdev_daemon; + + /* major / minor numbers of device */ + dev_t sep_devno; + dev_t sep_daemon_devno; + dev_t sep_singleton_devno; + + struct mutex sep_mutex; + struct mutex ioctl_mutex; + spinlock_t snd_rply_lck; + + /* flags to indicate use and lock status of sep */ + u32 pid_doing_transaction; + unsigned long in_use_flags; + + /* request daemon alread open */ + unsigned long request_daemon_open; + + /* 1 = Moorestown; 0 = Medfield */ + int mrst; + + /* address of the shared memory allocated during init for SEP driver + (coherent alloc) */ + dma_addr_t shared_bus; + size_t shared_size; + void *shared_addr; + + /* restricted access region (coherent alloc) */ + dma_addr_t rar_bus; + size_t rar_size; + void *rar_addr; + + /* Firmware regions; cache is at rar for Moorestown and + resident is at rar for Medfield */ + dma_addr_t cache_bus; + size_t cache_size; + void *cache_addr; + + dma_addr_t resident_bus; + size_t resident_size; + void *resident_addr; + + /* sep's scratchpad */ + dma_addr_t dcache_bus; + size_t dcache_size; + void *dcache_addr; + + /* Only used on Medfield */ + dma_addr_t extapp_bus; + size_t extapp_size; + void *extapp_addr; + + /* start address of the access to the SEP registers from driver */ + dma_addr_t reg_physical_addr; + dma_addr_t reg_physical_end; + void __iomem *reg_addr; + + /* wait queue head (event) of the driver */ + wait_queue_head_t event; + wait_queue_head_t event_request_daemon; + wait_queue_head_t event_mmap; + + struct sep_caller_id_entry + caller_id_table[SEP_CALLER_ID_TABLE_NUM_ENTRIES]; + + /* access flag for singleton device */ + unsigned long singleton_access_flag; + + /* transaction counter that coordinates the + transactions between SEP and HOST */ + unsigned long send_ct; + /* counter for the messages from sep */ + unsigned long reply_ct; + /* counter for the number of bytes allocated in the pool for the + current transaction */ + long data_pool_bytes_allocated; + + u32 num_of_data_allocations; + + /* number of the lli tables created in the current transaction */ + u32 num_lli_tables_created; + + /* number of data control blocks */ + u32 nr_dcb_creat; + + struct sep_dma_resource dma_res_arr[SEP_MAX_NUM_SYNC_DMA_OPS]; + +}; + +static inline void sep_write_reg(struct sep_device *dev, int reg, u32 value) +{ + void __iomem *addr = dev->reg_addr + reg; + writel(value, addr); +} + +static inline u32 sep_read_reg(struct sep_device *dev, int reg) +{ + void __iomem *addr = dev->reg_addr + reg; + return readl(addr); +} + +/* wait for SRAM write complete(indirect write */ +static inline void sep_wait_sram_write(struct sep_device *dev) +{ + u32 reg_val; + do + reg_val = sep_read_reg(dev, HW_SRAM_DATA_READY_REG_ADDR); + while (!(reg_val & 1)); +} + + +#endif diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c new file mode 100644 index 0000000..ef36239 --- /dev/null +++ b/drivers/staging/sep/sep_driver.c @@ -0,0 +1,4152 @@ +/* + * + * sep_driver.c - Security Processor Driver main group of functions + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2009.06.26 Initial publish + * 2010.09.14 Upgrade to Medfield + * + */ +#define DEBUG +#include <linux/init.h> +#include <linux/module.h> +#include <linux/miscdevice.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/kdev_t.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/poll.h> +#include <linux/wait.h> +#include <linux/pci.h> +#include <linux/firmware.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/current.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/pagemap.h> +#include <asm/cacheflush.h> +#include <linux/sched.h> +#include <linux/delay.h> + +#include <linux/netlink.h> +#include <linux/connector.h> +#include <linux/cn_proc.h> + +#include "sep_driver_hw_defs.h" +#include "sep_driver_config.h" +#include "sep_driver_api.h" +#include "sep_dev.h" + +/*---------------------------------------- + DEFINES +-----------------------------------------*/ + +#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000 + +/*-------------------------------------------- + GLOBAL variables +--------------------------------------------*/ + +/* Keep this a single static object for now to keep the conversion easy */ + +static struct sep_device *sep_dev; + +/** + * sep_load_firmware - copy firmware cache/resident + * This functions copies the cache and resident from their source + * location into destination shared memory. + * @sep: pointer to struct sep_device + */ + +static int sep_load_firmware(struct sep_device *sep) +{ + const struct firmware *fw; + char *cache_name = "cache.image.bin"; + char *res_name = "resident.image.bin"; + char *extapp_name = "extapp.image.bin"; + + int error = 0; + unsigned int work1, work2, work3; + + /* set addresses and load resident */ + sep->resident_bus = sep->rar_bus; + sep->resident_addr = sep->rar_addr; + + error = request_firmware(&fw, res_name, &sep->pdev->dev); + if (error) { + dev_warn(&sep->pdev->dev, "cant request resident fw\n"); + return error; + } + + memcpy(sep->resident_addr, (void *)fw->data, fw->size); + sep->resident_size = fw->size; + release_firmware(fw); + + dev_dbg(&sep->pdev->dev, "resident virtual is %p\n", + sep->resident_addr); + dev_dbg(&sep->pdev->dev, "residnet bus is %lx\n", + (unsigned long)sep->resident_bus); + dev_dbg(&sep->pdev->dev, "resident size is %08x\n", + sep->resident_size); + + /* set addresses for dcache (no loading needed) */ + work1 = (unsigned int)sep->resident_bus; + work2 = (unsigned int)sep->resident_size; + work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000; + sep->dcache_bus = (dma_addr_t)work3; + + work1 = (unsigned int)sep->resident_addr; + work2 = (unsigned int)sep->resident_size; + work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000; + sep->dcache_addr = (void *)work3; + + sep->dcache_size = 1024 * 128; + + /* set addresses and load cache */ + sep->cache_bus = sep->dcache_bus + sep->dcache_size; + sep->cache_addr = sep->dcache_addr + sep->dcache_size; + + error = request_firmware(&fw, cache_name, &sep->pdev->dev); + if (error) { + dev_warn(&sep->pdev->dev, "cant request cache fw\n"); + return error; + } + + memcpy(sep->cache_addr, (void *)fw->data, fw->size); + sep->cache_size = fw->size; + release_firmware(fw); + + dev_dbg(&sep->pdev->dev, "cache virtual is %p\n", + sep->cache_addr); + dev_dbg(&sep->pdev->dev, "cache bus is %08lx\n", + (unsigned long)sep->cache_bus); + dev_dbg(&sep->pdev->dev, "cache size is %08x\n", + sep->cache_size); + + /* set addresses and load extapp */ + sep->extapp_bus = sep->cache_bus + (1024 * 370); + sep->extapp_addr = sep->cache_addr + (1024 * 370); + + error = request_firmware(&fw, extapp_name, &sep->pdev->dev); + if (error) { + dev_warn(&sep->pdev->dev, "cant request extapp fw\n"); + return error; + } + + memcpy(sep->extapp_addr, (void *)fw->data, fw->size); + sep->extapp_size = fw->size; + release_firmware(fw); + + dev_dbg(&sep->pdev->dev, "extapp virtual is %p\n", + sep->extapp_addr); + dev_dbg(&sep->pdev->dev, "extapp bus is %08llx\n", + (unsigned long long)sep->extapp_bus); + dev_dbg(&sep->pdev->dev, "extapp size is %08x\n", + sep->extapp_size); + + return error; +} + +MODULE_FIRMWARE("sep/cache.image.bin"); +MODULE_FIRMWARE("sep/resident.image.bin"); +MODULE_FIRMWARE("sep/extapp.image.bin"); + +/** + * sep_dump_message - dump the message that is pending + * @sep: sep device + */ + +static void sep_dump_message(struct sep_device *sep) +{ + int count; + u32 *p = sep->shared_addr; + for (count = 0; count < 12 * 4; count += 4) + dev_dbg(&sep->pdev->dev, + "Word %d of the message is %x\n", + count, *p++); +} + +/** + * sep_map_and_alloc_shared_area - allocate shared block + * @sep: security processor + * @size: size of shared area + */ + +static int sep_map_and_alloc_shared_area(struct sep_device *sep) +{ + sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev, + sep->shared_size, + &sep->shared_bus, GFP_KERNEL); + + if (!sep->shared_addr) { + dev_warn(&sep->pdev->dev, + "shared memory dma_alloc_coherent failed\n"); + return -ENOMEM; + } + dev_dbg(&sep->pdev->dev, + "sep: shared_addr %x bytes @%p (bus %llx)\n", + sep->shared_size, sep->shared_addr, + (unsigned long long)sep->shared_bus); + return 0; +} + +/** + * sep_unmap_and_free_shared_area - free shared block + * @sep: security processor + */ +static void sep_unmap_and_free_shared_area(struct sep_device *sep) +{ + dev_dbg(&sep->pdev->dev, "shared area unmap and free\n"); + dma_free_coherent(&sep->pdev->dev, sep->shared_size, + sep->shared_addr, sep->shared_bus); +} + +/** + * sep_shared_bus_to_virt - convert bus/virt addresses + * Returns virtual address inside the shared area according + * to the bus address. + * @sep: pointer to struct sep_device + * @bus_address: address to convert + */ + +static void *sep_shared_bus_to_virt(struct sep_device *sep, + dma_addr_t bus_address) +{ + return sep->shared_addr + (bus_address - sep->shared_bus); +} + +/** + * open function for the singleton driver + * @inode_ptr struct inode * + * @file_ptr struct file * + */ + +static int sep_singleton_open(struct inode *inode_ptr, struct file *file_ptr) +{ + int error = 0; + + struct sep_device *sep; + + /** + * get the sep device structure and use it for the + * private_data field in filp for other methods + */ + sep = sep_dev; + + file_ptr->private_data = sep; + + dev_dbg(&sep->pdev->dev, "Singleton open for pid %d\n", + current->pid); + + dev_dbg(&sep->pdev->dev, "calling test and set for singleton 0\n"); + if (test_and_set_bit(0, &sep->singleton_access_flag)) { + error = -EBUSY; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, + "sep_singleton_open end\n"); +end_function: + + return error; +} + +/** + * sep_open - device open method + * @inode: inode of sep device + * @filp: file handle to sep device + * + * Open method for the SEP device. Called when userspace opens + * the SEP device node. Must also release the memory data pool + * allocations. + * + * Returns zero on success otherwise an error code. + */ + +static int sep_open(struct inode *inode, struct file *filp) +{ + struct sep_device *sep; + + /** + * get the sep device structure and use it for the + * private_data field in filp for other methods + */ + sep = sep_dev; + filp->private_data = sep; + + dev_dbg(&sep->pdev->dev, "Open for pid %d\n", current->pid); + + /* anyone can open; locking takes place at transaction level */ + return 0; +} + +/** + * sep_singleton_release - close a SEP singleton device + * @inode: inode of SEP device + * @filp: file handle being closed + * + * Called on the final close of a SEP device. As the open protects against + * multiple simultaenous opens that means this method is called when the + * final reference to the open handle is dropped. + */ + +static int sep_singleton_release(struct inode *inode, struct file *filp) +{ + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, "Singleton release for pid %d\n", + current->pid); + + clear_bit(0, &sep->singleton_access_flag); + + return 0; +} + +/** + * sep_request_daemonopen - request daemon open method + * @inode: inode of sep device + * @filp: file handle to sep device + * + * Open method for the SEP request daemon. Called when + * request daemon in userspace opens + * the SEP device node. + * + * Returns zero on success otherwise an error code. + */ + +static int sep_request_daemon_open(struct inode *inode, struct file *filp) +{ + struct sep_device *sep; + + int error = 0; + + sep = sep_dev; + filp->private_data = sep; + + dev_dbg(&sep->pdev->dev, "Request daemon open for pid %d\n", + current->pid); + + /* There is supposed to be only one request daemon */ + dev_dbg(&sep->pdev->dev, "calling test and set for req_dmon open 0\n"); + if (test_and_set_bit(0, &sep->request_daemon_open)) { + error = -EBUSY; + goto end_function; + } + +end_function: + + return error; +} + +/** + * sep_request_daemon_release - close a SEP daemon + * @inode: inode of SEP device + * @filp: file handle being closed + * + * Called on the final close of a SEP daemon. + */ + +static int sep_request_daemon_release(struct inode *inode, struct file *filp) +{ + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, "Reques daemon release for pid %d\n", + current->pid); + + /* clear the request_daemon_open flag */ + clear_bit(0, &sep->request_daemon_open); + + return 0; +} + +/** + * This function raises interrupt to SEPm that signals that is has a + * new command from HOST + * @sep: struct sep_device * + */ +static int sep_req_daemon_send_reply_command_handler(struct sep_device *sep) +{ + int error = 0; + + unsigned long lck_flags; + + dev_dbg(&sep->pdev->dev, + "sep_req_daemon_send_reply_command_handler start\n"); + + error = 0; + + sep_dump_message(sep); + + /* counters are lockable region */ + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + sep->send_ct++; + sep->reply_ct++; + + /* send the interrupt to SEP */ + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, + sep->send_ct); + + sep->send_ct++; + + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, + "sep_req_daemon_send_reply send_ct %lx reply_ct %lx\n", + sep->send_ct, sep->reply_ct); + + dev_dbg(&sep->pdev->dev, + "sep_req_daemon_send_reply_command_handler end\n"); + + return error; +} + + +/** + * sep_free_dma_table_data_handler - handles the request + * for freeing dma table for synhronic actions + * @sep: pointere to struct sep_device + */ + +static int sep_free_dma_table_data_handler(struct sep_device *sep) +{ + /* counter */ + int count = 0; + + /* dcb counter */ + int dcb_counter = 0; + + /* pointer to the current dma_resource struct */ + struct sep_dma_resource *dma; + + dev_dbg(&sep->pdev->dev, + "sep_free_dma_table_data_handler start\n"); + + + for (dcb_counter = 0; dcb_counter < sep->nr_dcb_creat; + dcb_counter++) { + + dma = &sep->dma_res_arr[dcb_counter]; + + /* unmap and free input map array */ + if (dma->in_map_array) { + + for (count = 0; count < dma->in_num_pages; + count++) { + + dma_unmap_page(&sep->pdev->dev, + dma->in_map_array[count].dma_addr, + dma->in_map_array[count].size, + DMA_TO_DEVICE); + } + + kfree(dma->in_map_array); + } + + /* unmap output map array, DON'T free it yet */ + if (dma->out_map_array) { + for (count = 0; count < dma->out_num_pages; + count++) { + + dma_unmap_page(&sep->pdev->dev, + dma->out_map_array[count].dma_addr, + dma->out_map_array[count].size, + DMA_FROM_DEVICE); + } + + kfree(dma->out_map_array); + } + + /* free page cache for output */ + if (dma->in_page_array) { + for (count = 0; count < dma->in_num_pages; + count++) { + + flush_dcache_page(dma->in_page_array[count]); + page_cache_release(dma->in_page_array[count]); + } + + kfree(dma->in_page_array); + + } + + if (dma->out_page_array) { + for (count = 0; count < dma->out_num_pages; + count++) { + + if (!PageReserved(dma->out_page_array[count])) + SetPageDirty(dma->out_page_array[count]); + + flush_dcache_page(dma->out_page_array[count]); + page_cache_release(dma->out_page_array[count]); + } + + kfree(dma->out_page_array); + } + + /* reset all the values */ + dma->in_page_array = 0; + dma->out_page_array = 0; + dma->in_num_pages = 0; + dma->out_num_pages = 0; + dma->in_map_array = 0; + dma->out_map_array = 0; + dma->in_map_num_entries = 0; + dma->out_map_num_entries = 0; + + } + + sep->nr_dcb_creat = 0; + sep->num_lli_tables_created = 0; + + dev_dbg(&sep->pdev->dev, + "sep_free_dma_table_data_handler end\n"); + + return 0; +} + + +/** + * sep_request_daemon_mmap - maps the + * shared area to user space + * @filp: pointer to struct file + * @vma: pointer to vm_area_struct + */ +static int sep_request_daemon_mmap(struct file *filp, + struct vm_area_struct *vma) +{ + /* device */ + struct sep_device *sep = filp->private_data; + + dma_addr_t bus_address; + + int error = 0; + + dev_dbg(&sep->pdev->dev, "daemon mmap start\n"); + + if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { + error = -EINVAL; + goto end_function; + } + + /* get physical address */ + bus_address = sep->shared_bus; + + dev_dbg(&sep->pdev->dev, + "bus_address is %08lx\n", + (unsigned long)bus_address); + + if (remap_pfn_range(vma, vma->vm_start, bus_address >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot)) { + + dev_warn(&sep->pdev->dev, + "remap_page_range failed\n"); + error = -EAGAIN; + goto end_function; + } + +end_function: + + dev_dbg(&sep->pdev->dev, "daemon mmap end\n"); + + return error; +} + +/** + * sep_request_daemon_poll - + * @sep: struct sep_device * for current sep device + * @filp: struct file * for open file + * @wait: poll_table * for poll + */ +static unsigned int sep_request_daemon_poll(struct file *filp, + poll_table *wait) +{ + u32 mask = 0; + + /* GPR2 register */ + u32 retval2; + + unsigned long lck_flags; + + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, + "daemon poll: start\n"); + + dev_dbg(&sep->pdev->dev, "daemon poll: calling poll wait sep_event\n"); + + poll_wait(filp, &sep->event_request_daemon, wait); + + dev_dbg(&sep->pdev->dev, "daemon poll: exit poll wait sep_event\n"); + + dev_dbg(&sep->pdev->dev, + "daemon poll: send_ct is %lx reply ct is %lx\n", + sep->send_ct, sep->reply_ct); + + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + /* check if the data is ready */ + if (sep->send_ct == sep->reply_ct) { + + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); + + dev_dbg(&sep->pdev->dev, + "daemon poll: data check (GPR2) is %x\n", retval2); + + /* check if PRINT request */ + if ((retval2 >> 30) & 0x1) { + + dev_dbg(&sep->pdev->dev, + "daemon poll: PRINTF request in\n"); + mask |= POLLIN; + goto end_function; + } + + /* check if NVS request */ + if (retval2 >> 31) { + + dev_dbg(&sep->pdev->dev, + "daemon poll: NVS request in\n"); + mask |= POLLPRI | POLLWRNORM; + } + } + + else { + + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, + "daemon poll: no reply received; returning 0\n"); + mask = 0; + } + +end_function: + + dev_dbg(&sep->pdev->dev, + "daemon poll: exit\n"); + return mask; +} + +/** + * sep_release - close a SEP device + * @inode: inode of SEP device + * @filp: file handle being closed + * + * Called on the final close of a SEP device. + */ + +static int sep_release(struct inode *inode, struct file *filp) +{ + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, "Release for pid %d\n", current->pid); + + mutex_lock(&sep->sep_mutex); + /* is this the process that has a transaction open? + * If so, lets reset pid_doing_transaction to 0 and + * clear the in use flags, and then wake up sep_event + * so that other processes can do transactions + */ + dev_dbg(&sep->pdev->dev, "waking up event and mmap_event\n"); + if (sep->pid_doing_transaction == current->pid) { + clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); + clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags); + sep_free_dma_table_data_handler(sep); + wake_up(&sep->event); + sep->pid_doing_transaction = 0; + } + + mutex_unlock(&sep->sep_mutex); + return 0; +} + +/** + * sep_mmap - maps the shared area to user space + * @filp: pointer to struct file + * @vma: pointer to vm_area_struct + */ +static int sep_mmap(struct file *filp, struct vm_area_struct *vma) +{ + dma_addr_t bus_addr; + struct sep_device *sep = filp->private_data; + unsigned long error = 0; + + dev_dbg(&sep->pdev->dev, "mmap start\n"); + + + dev_dbg(&sep->pdev->dev, "calling wait on event_mmap, tsetbit" + " SEP_MMAP_LOCK_BIT in_use_flags 0\n"); + /* Set the transaction busy (own the device) */ + wait_event_interruptible(sep->event, + test_and_set_bit(SEP_MMAP_LOCK_BIT, + &sep->in_use_flags) == 0); + + if (signal_pending(current)) { + error = -EINTR; + goto end_function_with_error; + } + /* + * The pid_doing_transaction indicates that this process + * now owns the facilities to performa a transaction with + * the sep. While this process is performing a transaction, + * no other process who has the sep device open can perform + * any transactions. This method allows more than one process + * to have the device open at any given time, which provides + * finer granularity for device utilization by multiple + * processes. + */ + mutex_lock(&sep->sep_mutex); + sep->pid_doing_transaction = current->pid; + mutex_unlock(&sep->sep_mutex); + + /* zero the pools and the number of data pool alocation pointers */ + sep->data_pool_bytes_allocated = 0; + sep->num_of_data_allocations = 0; + + /* + * check that the size of the mapped range is as the size of the message + * shared area + */ + if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { + error = -EINVAL; + goto end_function_with_error; + } + + dev_dbg(&sep->pdev->dev, + "shared_addr is %p\n", sep->shared_addr); + + /* get bus address */ + bus_addr = sep->shared_bus; + + dev_dbg(&sep->pdev->dev, + "bus_address is %lx\n", (unsigned long)bus_addr); + + if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot)) { + dev_warn(&sep->pdev->dev, + "remap_page_range failed\n"); + error = -EAGAIN; + goto end_function_with_error; + } + + dev_dbg(&sep->pdev->dev, "mmap end\n"); + goto end_function; + +end_function_with_error: + + /* clear the bit */ + clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); + mutex_lock(&sep->sep_mutex); + sep->pid_doing_transaction = 0; + mutex_unlock(&sep->sep_mutex); + + /* raise event for stuck contextes */ + + dev_warn(&sep->pdev->dev, "mmap error - waking up event\n"); + wake_up(&sep->event); + +end_function: + + return error; +} + +/** + * sep_poll - + * @filp: pointer to struct file + * @wait: pointer to poll_table + */ +static unsigned int sep_poll(struct file *filp, poll_table *wait) +{ + u32 mask = 0; + u32 retval = 0; + u32 retval2 = 0; + + unsigned long lck_flags; + + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, "poll: start\n"); + + /* am I the process that own the transaction? */ + mutex_lock(&sep->sep_mutex); + if (current->pid != sep->pid_doing_transaction) { + dev_warn(&sep->pdev->dev, "poll; wrong pid\n"); + mask = POLLERR; + mutex_unlock(&sep->sep_mutex); + goto end_function; + } + + mutex_unlock(&sep->sep_mutex); + + /* check if send command or send_reply were activated previously */ + if (!test_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) { + dev_warn(&sep->pdev->dev, "poll; lock bit set\n"); + mask = POLLERR; + goto end_function; + } + + /* add the event to the polling wait table */ + dev_dbg(&sep->pdev->dev, "poll: calling wait sep_event\n"); + + poll_wait(filp, &sep->event, wait); + + dev_dbg(&sep->pdev->dev, "poll: exit wait sep_event\n"); + + dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n", + sep->send_ct, sep->reply_ct); + + /* check if error occured during poll */ + retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); + + if (retval2 != 0x0) { + + dev_warn(&sep->pdev->dev, "poll; poll error %x\n", + retval2); + mask |= POLLERR; + goto end_function; + } + + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + + if (sep->send_ct == sep->reply_ct) { + + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); + dev_dbg(&sep->pdev->dev, "poll: data ready check (GPR2) %x\n", + retval); + + /* check if printf request */ + if ((retval >> 30) & 0x1) { + + dev_dbg(&sep->pdev->dev, "poll: sep printf request\n"); + wake_up(&sep->event_request_daemon); + goto end_function; + + } + + /* check if the this is sep reply or request */ + if (retval >> 31) { + + dev_dbg(&sep->pdev->dev, "poll: sep request\n"); + wake_up(&sep->event_request_daemon); + + } else { + + dev_dbg(&sep->pdev->dev, "poll: normal return\n"); + + /* in case it is again by send_reply_comand */ + + clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags); + + sep_dump_message(sep); + + dev_dbg(&sep->pdev->dev, + "poll; sep reply POLLIN | POLLRDNORM\n"); + + mask |= POLLIN | POLLRDNORM; + } + + } else { + + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, + "poll; no reply received; returning mask of 0\n"); + mask = 0; + } + +end_function: + + dev_dbg(&sep->pdev->dev, "poll: end\n"); + return mask; +} + +/** + * sep_time_address - address in SEP memory of time + * @sep: SEP device we want the address from + * + * Return the address of the two dwords in memory used for time + * setting. + */ + +static u32 *sep_time_address(struct sep_device *sep) +{ + return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES; +} + +/** + * sep_set_time - set the SEP time + * @sep: the SEP we are setting the time for + * + * Calculates time and sets it at the predefined address. + * Called with the sep mutex held. + */ +static unsigned long sep_set_time(struct sep_device *sep) +{ + struct timeval time; + u32 *time_addr; /* address of time as seen by the kernel */ + + + dev_dbg(&sep->pdev->dev, + "sep:sep_set_time start\n"); + + do_gettimeofday(&time); + + /* set value in the SYSTEM MEMORY offset */ + time_addr = sep_time_address(sep); + + time_addr[0] = SEP_TIME_VAL_TOKEN; + time_addr[1] = time.tv_sec; + + dev_dbg(&sep->pdev->dev, + "time.tv_sec is %lu\n", time.tv_sec); + dev_dbg(&sep->pdev->dev, + "time_addr is %p\n", time_addr); + dev_dbg(&sep->pdev->dev, + "sep->shared_addr is %p\n", sep->shared_addr); + + return time.tv_sec; +} + +/** + * sep_init_caller_id - initializes the caller id functionality + * @sep: pointer to struct sep_device + */ +static int sep_init_caller_id(struct sep_device *sep) +{ + /* return value */ + int ret_val; + + /* counter */ + int counter; + + struct cb_id caller_id; + + dev_dbg(&sep->pdev->dev, + "sep_init_caller_id start\n"); + + ret_val = 0; + + /* init cb_id struct */ + caller_id.idx = CN_IDX_PROC; + caller_id.val = CN_VAL_PROC; + + /** + * init caller id table + * note that locking is not needed here as this function is + * called prior to registering the device file + */ + for (counter = 0; counter < SEP_CALLER_ID_TABLE_NUM_ENTRIES; counter++) + sep->caller_id_table[counter].pid = 0; + + + /* init access flag */ + sep->singleton_access_flag = 0; + + dev_dbg(&sep->pdev->dev, + "caller id table init finished\n"); + + /* register to netlink connector */ + + if (ret_val) + dev_warn(&sep->pdev->dev, + "cn_add_callback failed %x\n", ret_val); + + dev_dbg(&sep->pdev->dev, + "sep_init_caller_id end\n"); + + return ret_val; +} + +/** + * sep_set_caller_id_handler - inserts the data into the caller id table + * note that this function does fall under the ioctl lock + * @sep: sep device + * @arg: pointer to struct caller_id_struct + */ +static int sep_set_caller_id_handler(struct sep_device *sep, u32 arg) +{ + void __user *hash; + int error; + int i; + struct caller_id_struct command_args; + + dev_dbg(&sep->pdev->dev, + "sep_set_caller_id_handler start\n"); + + error = 0; + + for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) { + if (sep->caller_id_table[i].pid == 0) + break; + } + + if (i == SEP_CALLER_ID_TABLE_NUM_ENTRIES) { + dev_warn(&sep->pdev->dev, + "no more caller id entries left\n"); + dev_warn(&sep->pdev->dev, + "maximum number is %d\n", + SEP_CALLER_ID_TABLE_NUM_ENTRIES); + + error = -EUSERS; + goto end_function; + } + + /* copy the data */ + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(command_args))) { + error = -EFAULT; + goto end_function; + } + + hash = (void __user *)(unsigned long)command_args.callerIdAddress; + + if (!command_args.pid || !command_args.callerIdSizeInBytes) { + error = -EINVAL; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, "pid is %x\n", command_args.pid); + dev_dbg(&sep->pdev->dev, "callerIdSizeInBytes is %x\n", + command_args.callerIdSizeInBytes); + + if (command_args.callerIdSizeInBytes > + SEP_CALLER_ID_HASH_SIZE_IN_BYTES) { + error = -EMSGSIZE; + goto end_function; + } + + sep->caller_id_table[i].pid = command_args.pid; + + if (copy_from_user(sep->caller_id_table[i].callerIdHash, + hash, command_args.callerIdSizeInBytes)) + error = -EFAULT; +end_function: + dev_dbg(&sep->pdev->dev, + "sep_set_caller_id_handler end\n"); + return error; +} + +/** + * sep_set_current_caller_id - set the caller id (if exists) to the sep + * note that this function does fall under the ioctl lock + * @sep: pointer to struct_sep + */ +static int sep_set_current_caller_id(struct sep_device *sep) +{ + int i; + + dev_dbg(&sep->pdev->dev, "sep_set_current_caller_id start\n"); + + dev_dbg(&sep->pdev->dev, "current process is %d\n", current->pid); + + /* zero the previous value */ + memset((void *)(sep->shared_addr + + (SEP_CALLER_ID_OFFSET_BYTES)), + 0, + SEP_CALLER_ID_HASH_SIZE_IN_BYTES); + + for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) { + if (sep->caller_id_table[i].pid == current->pid) { + dev_dbg(&sep->pdev->dev, "Caller Id found\n"); + + memcpy((void *)(sep->shared_addr + + (SEP_CALLER_ID_OFFSET_BYTES)), + (void *)(sep->caller_id_table[i].callerIdHash), + SEP_CALLER_ID_HASH_SIZE_IN_BYTES); + break; + } + } + + dev_dbg(&sep->pdev->dev, "sep_set_current_caller_id end\n"); + + return 0; +} + +/** + * sep_send_command_handler - kick off a command + * note that this function does fall under the ioctl lock + * This function raises interrupt to SEP that signals that is has a new + * command from the host + * @sep: sep being signalled + */ + +static int sep_send_command_handler(struct sep_device *sep) +{ + unsigned long lck_flags; + int error = 0; + + dev_dbg(&sep->pdev->dev, "sep_send_command_handler start\n"); + + dev_dbg(&sep->pdev->dev, "calling test and set for " + " in_use_flags SEP_SEND_MSG_LOCK_BIT 0\n"); + if (test_and_set_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) { + error = -EPROTO; + goto end_function; + } + + sep_set_time(sep); + + /* only Medfield has caller id */ + if (sep->mrst == 0) + sep_set_current_caller_id(sep); + + sep_dump_message(sep); + + /* update counter */ + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + sep->send_ct++; + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, "sep_send_command_handler" + "send_ct %lx reply_ct %lx\n", sep->send_ct, sep->reply_ct); + + /* send interrupt to SEP */ + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); + +end_function: + dev_dbg(&sep->pdev->dev, "sep_send_command_handler end\n"); + return error; +} + +/** + * sep_allocate_data_pool_memory_handler - + * This function handles the allocate data pool memory request + * This function returns calculates the bus address of the + * allocated memory, and the offset of this area from the mapped address. + * Therefore, the FVOs in user space can calculate the exact virtual + * address of this allocated memory + * @sep: pointer to struct_sep + * @arg: pointer to struct alloc_struct + */ +static int sep_allocate_data_pool_memory_handler(struct sep_device *sep, + unsigned long arg) +{ + int error = 0; + struct alloc_struct command_args; + + /* holds the allocated buffer address in the system memory pool */ + u32 *token_addr; + + dev_dbg(&sep->pdev->dev, + "sep_allocate_data_pool_memory_handler start\n"); + + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(struct alloc_struct))) { + error = -EFAULT; + goto end_function; + } + + /* allocate memory */ + if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) { + error = -ENOMEM; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, + "bytes_allocated: %x\n", (int)sep->data_pool_bytes_allocated); + dev_dbg(&sep->pdev->dev, + "offset: %x\n", SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES); + /* set the virtual and bus address */ + command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + + sep->data_pool_bytes_allocated; + + dev_dbg(&sep->pdev->dev, + "command_args.offset: %x\n", command_args.offset); + + /* place in the shared area that is known by the sep */ + token_addr = (u32 *)(sep->shared_addr + + SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES + + (sep->num_of_data_allocations)*2*sizeof(u32)); + + dev_dbg(&sep->pdev->dev, + "allocation offset: %x\n", + SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES); + dev_dbg(&sep->pdev->dev, "data pool token addr is %p\n", token_addr); + + token_addr[0] = SEP_DATA_POOL_POINTERS_VAL_TOKEN; + token_addr[1] = (u32)sep->shared_bus + + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + + sep->data_pool_bytes_allocated; + + dev_dbg(&sep->pdev->dev, "data pool token [0] %x\n", token_addr[0]); + dev_dbg(&sep->pdev->dev, "data pool token [1] %x\n", token_addr[1]); + + /* write the memory back to the user space */ + error = copy_to_user((void *)arg, (void *)&command_args, + sizeof(struct alloc_struct)); + if (error) { + + dev_warn(&sep->pdev->dev, + "allocate data pool copy to user error\n"); + goto end_function; + } + + /* update the allocation */ + sep->data_pool_bytes_allocated += command_args.num_bytes; + sep->num_of_data_allocations += 1; + + dev_dbg(&sep->pdev->dev, "data_allocations %d\n", + sep->num_of_data_allocations); + dev_dbg(&sep->pdev->dev, "bytes allocated %d\n", + (int)sep->data_pool_bytes_allocated); + +end_function: + + dev_dbg(&sep->pdev->dev, + "sep_allocate_data_pool_memory_handler end\n"); + return error; +} + +/** + * sep_lock_kernel_pages - + * This function locks all the physical pages of the kernel virtual buffer + * and construct a basic lli array, where each entry holds the physical + * page address and the size that application data holds in this page + * This function is used only during kernel crypto mod calls from within + * the kernel (when ioctl is not used) + * @sep: pointer to struct sep_device + * @kernel_virt_addr: address of data buffer in kernel + * @data_size: size of data + * @lli_array_ptr: lli array + * @in_out_flag: input into device or output from device + */ +static int sep_lock_kernel_pages(struct sep_device *sep, + u32 kernel_virt_addr, + u32 data_size, + struct sep_lli_entry **lli_array_ptr, + int in_out_flag) + +{ + /* error */ + int error = 0; + + /* array of lli */ + struct sep_lli_entry *lli_array; + + /* map array */ + struct sep_dma_map *map_array; + + dev_dbg(&sep->pdev->dev, + "sep_lock_kernel_pages start\n"); + + dev_dbg(&sep->pdev->dev, + "kernel_virt_addr is %08x\n", kernel_virt_addr); + dev_dbg(&sep->pdev->dev, + "data_size is %x\n", data_size); + + lli_array = kmalloc(sizeof(struct sep_lli_entry), GFP_ATOMIC); + if (!lli_array) { + + error = -ENOMEM; + goto end_function; + } + + map_array = kmalloc(sizeof(struct sep_dma_map), GFP_ATOMIC); + if (!map_array) { + error = -ENOMEM; + goto end_function_with_error; + } + + map_array[0].dma_addr = + dma_map_single(&sep->pdev->dev, (void *)kernel_virt_addr, + data_size, DMA_BIDIRECTIONAL); + map_array[0].size = data_size; + + + /* + * set the start address of the first page - app data may start not at + * the beginning of the page + */ + lli_array[0].bus_address = (u32)map_array[0].dma_addr; + lli_array[0].block_size = map_array[0].size; + + dev_dbg(&sep->pdev->dev, + "lli_array[0].bus_address is %08lx," + " lli_array[0].block_size is %x\n", + (unsigned long)lli_array[0].bus_address, + lli_array[0].block_size); + + /* set the output parameters */ + if (in_out_flag == SEP_DRIVER_IN_FLAG) { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 1; + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = 0; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = 1; + } else { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = 1; + sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = 0; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = 1; + } + + goto end_function; + +end_function_with_error: + + kfree(lli_array); + +end_function: + + dev_dbg(&sep->pdev->dev, + "sep_lock_kernel_pages end\n"); + + return error; +} + +/** + * sep_lock_user_pages - + * This function locks all the physical pages of the application + * virtual buffer and construct a basic lli array, where each entry + * holds the physical page address and the size that application + * data holds in this physical pages + * @sep: pointer to struct sep_device + * @app_virt_addr: user memory data buffer + * @data_size: size of data buffer + * @lli_array_ptr: lli array + * @in_out_flag: input or output to device + */ +static int sep_lock_user_pages(struct sep_device *sep, + u32 app_virt_addr, + u32 data_size, + struct sep_lli_entry **lli_array_ptr, + int in_out_flag) + +{ + /* error */ + int error; + + /* the the page of the end address of the user space buffer */ + u32 end_page; + + /* the page of the start address of the user space buffer */ + u32 start_page; + + /* the range in pages */ + u32 num_pages; + + /* array of pointers ot page */ + struct page **page_array; + + /* array of lli */ + struct sep_lli_entry *lli_array; + + /* map array */ + struct sep_dma_map *map_array; + + /* direction of the DMA mapping for locked pages */ + enum dma_data_direction dir; + + /* count */ + u32 count; + + /* result */ + int result; + + dev_dbg(&sep->pdev->dev, + "sep_lock_user_pages start\n"); + + error = 0; + + /* set start and end pages and num pages */ + end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT; + start_page = app_virt_addr >> PAGE_SHIFT; + num_pages = end_page - start_page + 1; + + dev_dbg(&sep->pdev->dev, + "app_virt_addr is %x\n", app_virt_addr); + dev_dbg(&sep->pdev->dev, + "data_size is %x\n", data_size); + dev_dbg(&sep->pdev->dev, + "start_page is %x\n", start_page); + dev_dbg(&sep->pdev->dev, + "end_page is %x\n", end_page); + dev_dbg(&sep->pdev->dev, + "num_pages is %x\n", num_pages); + + dev_dbg(&sep->pdev->dev, + "starting page_array malloc\n"); + + /* allocate array of pages structure pointers */ + page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC); + if (!page_array) { + error = -ENOMEM; + goto end_function; + } + + map_array = kmalloc(sizeof(struct sep_dma_map) * num_pages, GFP_ATOMIC); + if (!map_array) { + dev_warn(&sep->pdev->dev, + "kmalloc for map_array failed\n"); + error = -ENOMEM; + goto end_function_with_error1; + } + + lli_array = kmalloc(sizeof(struct sep_lli_entry) * num_pages, + GFP_ATOMIC); + + if (!lli_array) { + + dev_warn(&sep->pdev->dev, + "kmalloc for lli_array failed\n"); + error = -ENOMEM; + goto end_function_with_error2; + } + + dev_dbg(&sep->pdev->dev, + "starting get_user_pages\n"); + + /* convert the application virtual address into a set of physical */ + down_read(¤t->mm->mmap_sem); + result = get_user_pages(current, current->mm, app_virt_addr, + num_pages, + ((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1), + 0, page_array, 0); + + up_read(¤t->mm->mmap_sem); + + /* check the number of pages locked - if not all then exit with error */ + if (result != num_pages) { + + dev_warn(&sep->pdev->dev, + "not all pages locked by get_user_pages\n"); + error = -ENOMEM; + goto end_function_with_error3; + } + + dev_dbg(&sep->pdev->dev, + "get_user_pages succeeded\n"); + + /* set direction */ + if (in_out_flag == SEP_DRIVER_IN_FLAG) + dir = DMA_TO_DEVICE; + else + dir = DMA_FROM_DEVICE; + + /* + * fill the array using page array data and + * map the pages - this action + * will also flush the cache as needed + */ + for (count = 0; count < num_pages; count++) { + /* fill the map array */ + map_array[count].dma_addr = + dma_map_page(&sep->pdev->dev, page_array[count], + 0, PAGE_SIZE, /*dir*/DMA_BIDIRECTIONAL); + + map_array[count].size = PAGE_SIZE; + + /* fill the lli array entry */ + lli_array[count].bus_address = (u32)map_array[count].dma_addr; + lli_array[count].block_size = PAGE_SIZE; + + dev_warn(&sep->pdev->dev, + "lli_array[%x].bus_address is %08lx, \ + lli_array[%x].block_size is %x\n", + count, (unsigned long)lli_array[count].bus_address, + count, lli_array[count].block_size); + } + + /* check the offset for the first page */ + lli_array[0].bus_address = + lli_array[0].bus_address + (app_virt_addr & (~PAGE_MASK)); + + /* check that not all the data is in the first page only */ + if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size) + lli_array[0].block_size = data_size; + else + lli_array[0].block_size = + PAGE_SIZE - (app_virt_addr & (~PAGE_MASK)); + + dev_dbg(&sep->pdev->dev, + "lli_array[0].bus_address is %08lx, \ + lli_array[0].block_size is %x\n", + (unsigned long)lli_array[count].bus_address, + lli_array[count].block_size); + + /* check the size of the last page */ + if (num_pages > 1) { + + lli_array[num_pages - 1].block_size = + (app_virt_addr + data_size) & (~PAGE_MASK); + + dev_warn(&sep->pdev->dev, + "lli_array[%x].bus_address is %08lx, \ + lli_array[%x].block_size is %x\n", + num_pages - 1, + (unsigned long)lli_array[count].bus_address, + num_pages - 1, + lli_array[count].block_size); + } + + /* set output params acording to the in_out flag */ + if (in_out_flag == SEP_DRIVER_IN_FLAG) { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = + num_pages; + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = + page_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = + map_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = + num_pages; + } else { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = + num_pages; + sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = + page_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = + map_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = + num_pages; + } + + goto end_function; + +end_function_with_error3: + + /* free lli array */ + kfree(lli_array); + +end_function_with_error2: + + kfree(map_array); + +end_function_with_error1: + + /* free page array */ + kfree(page_array); + +end_function: + + dev_dbg(&sep->pdev->dev, + "sep_lock_user_pages end\n"); + + return error; +} + +/** + * u32 sep_calculate_lli_table_max_size - + * this function calculates the size of data + * that can be inserted into the lli + * table from this array the condition is that + * either the table is full + * (all etnries are entered), or there are no more + * entries in the lli array + * @sep: pointer to struct sep_device + * @lli_in_array_ptr + * @num_array_entries + * @last_table_flag + */ +static u32 sep_calculate_lli_table_max_size(struct sep_device *sep, + struct sep_lli_entry *lli_in_array_ptr, + u32 num_array_entries, + u32 *last_table_flag) +{ + /* table data size */ + u32 table_data_size; + + /* data size for the next table */ + u32 next_table_data_size; + + /* counter */ + u32 counter; + + table_data_size = 0; + *last_table_flag = 0; + + /* + * calculate the data in the out lli table till we fill the whole + * table or till the data has ended + */ + for (counter = 0; + (counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) && + (counter < num_array_entries); counter++) + table_data_size += lli_in_array_ptr[counter].block_size; + + /* + * check if we reached the last entry, + * meaning this ia the last table to build, + * and no need to check the block alignment + */ + if (counter == num_array_entries) { + + /* set the last table flag */ + *last_table_flag = 1; + goto end_function; + } + + /* + * calculate the data size of the next table. + * Stop if no entries left or + * if data size is more the DMA restriction + */ + next_table_data_size = 0; + for (; counter < num_array_entries; counter++) { + + next_table_data_size += lli_in_array_ptr[counter].block_size; + + if (next_table_data_size >= SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) + + break; + } + + /* + * check if the next table data size is less then DMA rstriction. + * if it is - recalculate the current table size, so that the next + * table data size will be adaquete for DMA + */ + if (next_table_data_size && + next_table_data_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) + + table_data_size -= (SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE - + next_table_data_size); + + dev_dbg(&sep->pdev->dev, + "table data size is %x\n", table_data_size); + +end_function: + + return table_data_size; +} + +/** + * sep_build_lli_table - + * this functions builds ont lli table from the lli_array according to + * the given size of data + * @sep: pointer to struct sep_device + * @lli_array_ptr: pointer to lli array + * @lli_table_ptr: pointer to lli table + * @num_processed_entries_ptr: pointer to number of entries + * @num_table_entries_ptr: pointer to number of tables + * @table_data_size: total data size + */ +static void sep_build_lli_table(struct sep_device *sep, + struct sep_lli_entry *lli_array_ptr, + struct sep_lli_entry *lli_table_ptr, + u32 *num_processed_entries_ptr, + u32 *num_table_entries_ptr, + u32 table_data_size) +{ + /* current table data size */ + u32 curr_table_data_size; + + /* counter of lli array entry */ + u32 array_counter; + + dev_dbg(&sep->pdev->dev, + "sep_build_lli_table start\n"); + + /* init currrent table data size and lli array entry counter */ + curr_table_data_size = 0; + array_counter = 0; + *num_table_entries_ptr = 1; + + dev_dbg(&sep->pdev->dev, + "table_data_size is %x\n", table_data_size); + + /* fill the table till table size reaches the needed amount */ + while (curr_table_data_size < table_data_size) { + /* update the number of entries in table */ + (*num_table_entries_ptr)++; + + lli_table_ptr->bus_address = + cpu_to_le32(lli_array_ptr[array_counter].bus_address); + + lli_table_ptr->block_size = + cpu_to_le32(lli_array_ptr[array_counter].block_size); + + curr_table_data_size += lli_array_ptr[array_counter].block_size; + + dev_dbg(&sep->pdev->dev, + "lli_table_ptr is %p\n", lli_table_ptr); + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->bus_address is %08lx\n", + (unsigned long)lli_table_ptr->bus_address); + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->block_size is %x\n", + lli_table_ptr->block_size); + + /* check for overflow of the table data */ + if (curr_table_data_size > table_data_size) { + + dev_dbg(&sep->pdev->dev, + "curr_table_data_size too large\n"); + + /* update the size of block in the table */ + lli_table_ptr->block_size -= + cpu_to_le32((curr_table_data_size - table_data_size)); + + /* update the physical address in the lli array */ + lli_array_ptr[array_counter].bus_address += + cpu_to_le32(lli_table_ptr->block_size); + + /* update the block size left in the lli array */ + lli_array_ptr[array_counter].block_size = + (curr_table_data_size - table_data_size); + + } else + + /* advance to the next entry in the lli_array */ + array_counter++; + + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->bus_address is %08lx\n", + (unsigned long)lli_table_ptr->bus_address); + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->block_size is %x\n", + lli_table_ptr->block_size); + + /* move to the next entry in table */ + lli_table_ptr++; + } + + /* set the info entry to default */ + lli_table_ptr->bus_address = 0xffffffff; + lli_table_ptr->block_size = 0; + + dev_dbg(&sep->pdev->dev, + "lli_table_ptr is %p\n", lli_table_ptr); + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->bus_address is %08lx\n", + (unsigned long)lli_table_ptr->bus_address); + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->block_size is %x\n", + lli_table_ptr->block_size); + + /* set the output parameter */ + *num_processed_entries_ptr += array_counter; + + dev_dbg(&sep->pdev->dev, + "num_processed_entries_ptr is %x\n", + *num_processed_entries_ptr); + + dev_dbg(&sep->pdev->dev, + "sep_build_lli_table end\n"); + + return; +} + +/** + * sep_shared_area_virt_to_bus - + * This functions returns the physical address inside shared area according + * to the virtual address. It can be either on the externa RAM device + * (ioremapped), or on the system RAM + * This implementation is for the external RAM + * @sep: pointer to struct sep_device + * @virt_address: virtual address to convert + */ +static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep, + void *virt_address) +{ + dev_dbg(&sep->pdev->dev, + "sh virt to phys v %08lx\n", + (unsigned long)virt_address); + dev_dbg(&sep->pdev->dev, + "sh virt to phys p %08lx\n", + (unsigned long)(sep->shared_bus + + (virt_address - sep->shared_addr))); + + return sep->shared_bus + + (size_t)(virt_address - sep->shared_addr); +} + +/** + * sep_shared_area_bus_to_virt - + * This functions returns the virtual address inside shared area + * according to the physical address. It can be either on the + * externa RAM device (ioremapped), or on the system RAM + * This implementation is for the external RAM + * @sep: pointer to struct sep_device + * @bus_address: bus address to convert + */ + +static void *sep_shared_area_bus_to_virt(struct sep_device *sep, + dma_addr_t bus_address) +{ + dev_dbg(&sep->pdev->dev, + "shared bus to virt b=%x v=%x\n", + (u32)bus_address, + (u32)(sep->shared_addr + + (size_t)(bus_address - sep->shared_bus))); + + return sep->shared_addr + + (size_t)(bus_address - sep->shared_bus); +} + +/** + * sep_debug_print_lli_tables - + * this function goes over the list of the print created tables and + * prints all the data + * @sep: pointer to struct sep_device + * @lli_table_ptr: pointer to sep_lli_entry + * @num_table_entries: number of entries + * @table_data_size: total data size + */ +static void sep_debug_print_lli_tables(struct sep_device *sep, + struct sep_lli_entry *lli_table_ptr, + unsigned long num_table_entries, + unsigned long table_data_size) +{ + unsigned long table_count = 0; + unsigned long entries_count = 0; + + dev_dbg(&sep->pdev->dev, + "sep_debug_print_lli_tables start\n"); + + table_count = 1; + while ((unsigned long) lli_table_ptr != 0xffffffff) { + dev_dbg(&sep->pdev->dev, + "lli table %08lx, table_data_size is %lu\n", + table_count, table_data_size); + dev_dbg(&sep->pdev->dev, + "num_table_entries is %lu\n", + num_table_entries); + + /* print entries of the table (without info entry) */ + for (entries_count = 0; entries_count < num_table_entries; + entries_count++, lli_table_ptr++) { + + dev_dbg(&sep->pdev->dev, + "lli_table_ptr address is %08lx\n", + (unsigned long) lli_table_ptr); + + dev_dbg(&sep->pdev->dev, + "phys address is %08lx block size is %x\n", + (unsigned long)lli_table_ptr->bus_address, + lli_table_ptr->block_size); + } + + /* point to the info entry */ + lli_table_ptr--; + + dev_dbg(&sep->pdev->dev, + "phys lli_table_ptr->block_size is %x\n", + lli_table_ptr->block_size); + + dev_dbg(&sep->pdev->dev, + "phys lli_table_ptr->physical_address is %08lu\n", + (unsigned long)lli_table_ptr->bus_address); + + + table_data_size = lli_table_ptr->block_size & 0xffffff; + num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff; + lli_table_ptr = (struct sep_lli_entry *) + (lli_table_ptr->bus_address); + + dev_dbg(&sep->pdev->dev, + "phys table_data_size is %lu num_table_entries is" + " %lu lli_table_ptr is%lu\n", table_data_size, + num_table_entries, (unsigned long)lli_table_ptr); + + if ((unsigned long)lli_table_ptr != 0xffffffff) + lli_table_ptr = (struct sep_lli_entry *) + sep_shared_bus_to_virt(sep, + (unsigned long)lli_table_ptr); + + table_count++; + } + dev_dbg(&sep->pdev->dev, + "sep_debug_print_lli_tables end\n"); +} + + +/** + * sep_prepare_empty_lli_table - + * This function creates empty lli tables when there is no data + * @sep: pointer to struct sep_device + * @lli_table_addr_ptr: pointer to lli table + * @num_entries_ptr: pointer to number of entries + * @table_data_size_ptr: point to table data size + */ +static void sep_prepare_empty_lli_table(struct sep_device *sep, + dma_addr_t *lli_table_addr_ptr, + u32 *num_entries_ptr, + u32 *table_data_size_ptr) +{ + struct sep_lli_entry *lli_table_ptr; + + dev_dbg(&sep->pdev->dev, "sep_prepare_empty_lli_table start\n"); + + /* find the area for new table */ + lli_table_ptr = + (struct sep_lli_entry *)(sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + sep->num_lli_tables_created * + sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); + + lli_table_ptr->bus_address = 0; + lli_table_ptr->block_size = 0; + + lli_table_ptr++; + lli_table_ptr->bus_address = 0xFFFFFFFF; + lli_table_ptr->block_size = 0; + + /* set the output parameter value */ + *lli_table_addr_ptr = sep->shared_bus + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + sep->num_lli_tables_created * + sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + /* set the num of entries and table data size for empty table */ + *num_entries_ptr = 2; + *table_data_size_ptr = 0; + + /* update the number of created tables */ + sep->num_lli_tables_created++; + + dev_dbg(&sep->pdev->dev, "sep_prepare_empty_lli_table start\n"); + +} + +/** + * sep_prepare_input_dma_table - + * This function prepares only input DMA table for synhronic symmetric + * operations (HASH) + * Note that all bus addresses that are passed to the sep + * are in 32 bit format; the SEP is a 32 bit device + * @sep: pointer to struct sep_device + * @data_size: + * @block_size: + * @lli_table_ptr: + * @num_entries_ptr: + * @table_data_size_ptr: + * @is_kva: set for kernel data (kernel cryptio call) + */ +static int sep_prepare_input_dma_table(struct sep_device *sep, + unsigned long app_virt_addr, + u32 data_size, + u32 block_size, + dma_addr_t *lli_table_ptr, + u32 *num_entries_ptr, + u32 *table_data_size_ptr, + bool is_kva) +{ + /* pointer to the info entry of the table - the last entry */ + struct sep_lli_entry *info_entry_ptr; + + /* array of pointers ot page */ + struct sep_lli_entry *lli_array_ptr; + + /* points to the first entry to be processed in the lli_in_array */ + u32 current_entry = 0; + + /* num entries in the virtual buffer */ + u32 sep_lli_entries = 0; + + /* lli table pointer */ + struct sep_lli_entry *in_lli_table_ptr; + + /* the total data in one table */ + u32 table_data_size = 0; + + /* flag for last table */ + u32 last_table_flag = 0; + + /* number of entries in lli table */ + u32 num_entries_in_table = 0; + + /* next table address */ + u32 lli_table_alloc_addr = 0; + + /* error */ + int error = 0; + + dev_dbg(&sep->pdev->dev, + "sep_prepare_input_dma_table start\n"); + + dev_dbg(&sep->pdev->dev, + "data_size is %x\n", data_size); + dev_dbg(&sep->pdev->dev, + "block_size is %x\n", block_size); + + /* initialize the pages pointers */ + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = 0; + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 0; + + /* set the kernel address for first table to be allocated */ + lli_table_alloc_addr = (u32)(sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + sep->num_lli_tables_created * + sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); + + if (data_size == 0) { + + /* special case - create meptu table - 2 entries, zero data */ + sep_prepare_empty_lli_table(sep, lli_table_ptr, + num_entries_ptr, + table_data_size_ptr); + + goto update_dcb_counter; + } + + /* check if the pages are in Kernel Virtual Address layout */ + if (is_kva == true) + + /* lock the pages in the kernel */ + error = sep_lock_kernel_pages(sep, app_virt_addr, + data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG); + + else + + /* + * lock the pages of the user buffer + * and translate them to pages + */ + error = sep_lock_user_pages(sep, app_virt_addr, + data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG); + + if (error) + goto end_function; + + dev_dbg(&sep->pdev->dev, + "output sep_in_num_pages is %x\n", + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages); + + current_entry = 0; + info_entry_ptr = 0; + + sep_lli_entries = + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages; + + /* loop till all the entries in in array are not processed */ + while (current_entry < sep_lli_entries) { + + /* set the new input and output tables */ + in_lli_table_ptr = + (struct sep_lli_entry *)lli_table_alloc_addr; + + lli_table_alloc_addr += sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + if (lli_table_alloc_addr > + ((u32)sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) { + + error = -ENOMEM; + goto end_function_error; + + } + + /* update the number of created tables */ + sep->num_lli_tables_created++; + + /* calculate the maximum size of data for input table */ + table_data_size = sep_calculate_lli_table_max_size(sep, + &lli_array_ptr[current_entry], + (sep_lli_entries - current_entry), + &last_table_flag); + + /** + * if this is not the last table - + * then allign it to the block size + */ + if (!last_table_flag) + table_data_size = + (table_data_size / block_size) * block_size; + + dev_dbg(&sep->pdev->dev, + "output table_data_size is %x\n", + table_data_size); + + /* construct input lli table */ + sep_build_lli_table(sep, &lli_array_ptr[current_entry], + in_lli_table_ptr, + ¤t_entry, &num_entries_in_table, table_data_size); + + if (info_entry_ptr == 0) { + + /* set the output parameters to physical addresses */ + *lli_table_ptr = sep_shared_area_virt_to_bus(sep, + in_lli_table_ptr); + *num_entries_ptr = num_entries_in_table; + *table_data_size_ptr = table_data_size; + + dev_dbg(&sep->pdev->dev, + "output lli_table_in_ptr is %08lx\n", + (unsigned long)*lli_table_ptr); + + } + + else { + + /* update the info entry of the previous in table */ + info_entry_ptr->bus_address = + sep_shared_area_virt_to_bus(sep, + in_lli_table_ptr); + info_entry_ptr->block_size = + ((num_entries_in_table) << 24) | + (table_data_size); + } + + /* save the pointer to the info entry of the current tables */ + info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1; + + } + + /* print input tables */ + sep_debug_print_lli_tables(sep, (struct sep_lli_entry *) + sep_shared_area_bus_to_virt(sep, *lli_table_ptr), + *num_entries_ptr, + *table_data_size_ptr); + + /* the array of the pages */ + kfree(lli_array_ptr); + +update_dcb_counter: + + /* update dcb counter */ + sep->nr_dcb_creat++; + + goto end_function; + +end_function_error: + + /* free all the allocated resources */ + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array); + kfree(lli_array_ptr); + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array); + +end_function: + + dev_dbg(&sep->pdev->dev, + "sep_prepare_input_dma_table end\n"); + + return error; + +} +/** + * sep_construct_dma_tables_from_lli - + * This function creates the input and output dma tables for + * symmetric operations (AES/DES) according to the block + * size from LLI arays + * Note that all bus addresses that are passed to the sep + * are in 32 bit format; the SEP is a 32 bit device + * @sep: pointer to struct_sep + * @lli_in_array: + * @sep_in_lli_entries: + * @lli_out_array: + * @sep_out_lli_entries + * @block_size + * @lli_table_in_ptr + * @lli_table_out_ptr + * @in_num_entries_ptr + * @out_num_entries_ptr + * @table_data_size_ptr + */ +static int sep_construct_dma_tables_from_lli( + struct sep_device *sep, + struct sep_lli_entry *lli_in_array, + u32 sep_in_lli_entries, + struct sep_lli_entry *lli_out_array, + u32 sep_out_lli_entries, + u32 block_size, + dma_addr_t *lli_table_in_ptr, + dma_addr_t *lli_table_out_ptr, + u32 *in_num_entries_ptr, + u32 *out_num_entries_ptr, + u32 *table_data_size_ptr) +{ + /* points to the area where next lli table can be allocated */ + u32 lli_table_alloc_addr = 0; + + /* input lli table */ + struct sep_lli_entry *in_lli_table_ptr = 0; + + /* output lli table */ + struct sep_lli_entry *out_lli_table_ptr = 0; + + /* pointer to the info entry of the table - the last entry */ + struct sep_lli_entry *info_in_entry_ptr = 0; + + /* pointer to the info entry of the table - the last entry */ + struct sep_lli_entry *info_out_entry_ptr = 0; + + /* points to the first entry to be processed in the lli_in_array */ + u32 current_in_entry = 0; + + /* points to the first entry to be processed in the lli_out_array */ + u32 current_out_entry = 0; + + /* max size of the input table */ + u32 in_table_data_size = 0; + + /* max size of the output table */ + u32 out_table_data_size = 0; + + /* flag te signifies if this is the last tables build */ + u32 last_table_flag = 0; + + /* the data size that should be in table */ + u32 table_data_size = 0; + + /* number of etnries in the input table */ + u32 num_entries_in_table = 0; + + /* number of etnries in the output table */ + u32 num_entries_out_table = 0; + + dev_dbg(&sep->pdev->dev, + "sep_construct_dma_tables_from_lli start\n"); + + /* initiate to point after the message area */ + lli_table_alloc_addr = (u32)(sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + (sep->num_lli_tables_created * + (sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP))); + + /* loop till all the entries in in array are not processed */ + while (current_in_entry < sep_in_lli_entries) { + + /* set the new input and output tables */ + in_lli_table_ptr = + (struct sep_lli_entry *)lli_table_alloc_addr; + + lli_table_alloc_addr += sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + /* set the first output tables */ + out_lli_table_ptr = + (struct sep_lli_entry *)lli_table_alloc_addr; + + /* check if the DMA table area limit was overrun */ + if ((lli_table_alloc_addr + sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP) > + ((u32)sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) { + + dev_warn(&sep->pdev->dev, + "dma table limit overrun\n"); + return -ENOMEM; + } + + /* update the number of the lli tables created */ + sep->num_lli_tables_created += 2; + + lli_table_alloc_addr += sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + /* calculate the maximum size of data for input table */ + in_table_data_size = + sep_calculate_lli_table_max_size(sep, + &lli_in_array[current_in_entry], + (sep_in_lli_entries - current_in_entry), + &last_table_flag); + + /* calculate the maximum size of data for output table */ + out_table_data_size = + sep_calculate_lli_table_max_size(sep, + &lli_out_array[current_out_entry], + (sep_out_lli_entries - current_out_entry), + &last_table_flag); + + dev_dbg(&sep->pdev->dev, + "in_table_data_size is %x\n", + in_table_data_size); + + dev_dbg(&sep->pdev->dev, + "out_table_data_size is %x\n", + out_table_data_size); + + table_data_size = in_table_data_size; + + if (!last_table_flag) { + /* + * if this is not the last table, + * then must check where the data is smallest + * and then align it to the block size + */ + if (table_data_size > out_table_data_size) + table_data_size = out_table_data_size; + + /* + * now calculate the table size so that + * it will be module block size + */ + table_data_size = (table_data_size / block_size) * + block_size; + } + + dev_dbg(&sep->pdev->dev, + "table_data_size is %x\n", table_data_size); + + /* construct input lli table */ + sep_build_lli_table(sep, &lli_in_array[current_in_entry], + in_lli_table_ptr, + ¤t_in_entry, + &num_entries_in_table, + table_data_size); + + /* construct output lli table */ + sep_build_lli_table(sep, &lli_out_array[current_out_entry], + out_lli_table_ptr, + ¤t_out_entry, + &num_entries_out_table, + table_data_size); + + /* if info entry is null - this is the first table built */ + if (info_in_entry_ptr == 0) { + /* set the output parameters to physical addresses */ + *lli_table_in_ptr = + sep_shared_area_virt_to_bus(sep, in_lli_table_ptr); + + *in_num_entries_ptr = num_entries_in_table; + + *lli_table_out_ptr = + sep_shared_area_virt_to_bus(sep, + out_lli_table_ptr); + + *out_num_entries_ptr = num_entries_out_table; + *table_data_size_ptr = table_data_size; + + dev_dbg(&sep->pdev->dev, + "output lli_table_in_ptr is %08lx\n", + (unsigned long)*lli_table_in_ptr); + dev_dbg(&sep->pdev->dev, + "output lli_table_out_ptr is %08lx\n", + (unsigned long)*lli_table_out_ptr); + } else { + /* update the info entry of the previous in table */ + info_in_entry_ptr->bus_address = + sep_shared_area_virt_to_bus(sep, + in_lli_table_ptr); + + info_in_entry_ptr->block_size = + ((num_entries_in_table) << 24) | + (table_data_size); + + /* update the info entry of the previous in table */ + info_out_entry_ptr->bus_address = + sep_shared_area_virt_to_bus(sep, + out_lli_table_ptr); + + info_out_entry_ptr->block_size = + ((num_entries_out_table) << 24) | + (table_data_size); + + dev_dbg(&sep->pdev->dev, + "output lli_table_in_ptr:%08lx %08x\n", + (unsigned long)info_in_entry_ptr->bus_address, + info_in_entry_ptr->block_size); + + dev_dbg(&sep->pdev->dev, + "output lli_table_out_ptr:%08lx %08x\n", + (unsigned long)info_out_entry_ptr->bus_address, + info_out_entry_ptr->block_size); + } + + /* save the pointer to the info entry of the current tables */ + info_in_entry_ptr = in_lli_table_ptr + + num_entries_in_table - 1; + info_out_entry_ptr = out_lli_table_ptr + + num_entries_out_table - 1; + + dev_dbg(&sep->pdev->dev, + "output num_entries_out_table is %x\n", + (u32)num_entries_out_table); + dev_dbg(&sep->pdev->dev, + "output info_in_entry_ptr is %lx\n", + (unsigned long)info_in_entry_ptr); + dev_dbg(&sep->pdev->dev, + "output info_out_entry_ptr is %lx\n", + (unsigned long)info_out_entry_ptr); + } + + /* print input tables */ + sep_debug_print_lli_tables(sep, + (struct sep_lli_entry *) + sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr), + *in_num_entries_ptr, + *table_data_size_ptr); + + /* print output tables */ + sep_debug_print_lli_tables(sep, + (struct sep_lli_entry *) + sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr), + *out_num_entries_ptr, + *table_data_size_ptr); + + dev_dbg(&sep->pdev->dev, + "sep_construct_dma_tables_from_lli end\n"); + + return 0; +} + +/** + * sep_prepare_input_output_dma_table - + * This function builds input and output DMA tables for synhronic + * symmetric operations (AES, DES, HASH). It also checks that each table + * is of the modular block size + * Note that all bus addresses that are passed to the sep + * are in 32 bit format; the SEP is a 32 bit device + * @app_virt_in_addr: + * @app_virt_out_addr: + * @data_size: + * @block_size: + * @lli_table_in_ptr: + * @lli_table_out_ptr: + * @in_num_entries_ptr: + * @out_num_entries_ptr: + * @table_data_size_ptr: + * @is_kva: set for kernel data; used only for kernel crypto module + */ +static int sep_prepare_input_output_dma_table(struct sep_device *sep, + unsigned long app_virt_in_addr, + unsigned long app_virt_out_addr, + u32 data_size, + u32 block_size, + dma_addr_t *lli_table_in_ptr, + dma_addr_t *lli_table_out_ptr, + u32 *in_num_entries_ptr, + u32 *out_num_entries_ptr, + u32 *table_data_size_ptr, + bool is_kva) + +{ + /* array of pointers of page */ + struct sep_lli_entry *lli_in_array; + + /* array of pointers of page */ + struct sep_lli_entry *lli_out_array; + + /* error */ + int error = 0; + + dev_dbg(&sep->pdev->dev, + "sep_prepare_input_output_dma_table start\n"); + + if (data_size == 0) { + + /* prepare empty table for input and output */ + sep_prepare_empty_lli_table(sep, lli_table_in_ptr, + in_num_entries_ptr, table_data_size_ptr); + + sep_prepare_empty_lli_table(sep, lli_table_out_ptr, + out_num_entries_ptr, table_data_size_ptr); + + goto update_dcb_counter; + } + + /* initialize the pages pointers */ + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = 0; + sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = 0; + + /* lock the pages of the buffer and translate them to pages */ + if (is_kva == true) { + error = sep_lock_kernel_pages(sep, app_virt_in_addr, + data_size, &lli_in_array, SEP_DRIVER_IN_FLAG); + + if (error) { + dev_warn(&sep->pdev->dev, + "lock kernel for in failed\n"); + goto end_function; + } + + error = sep_lock_kernel_pages(sep, app_virt_out_addr, + data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG); + + if (error) { + dev_warn(&sep->pdev->dev, + "lock kernel for out failed\n"); + goto end_function; + } + } + + else { + error = sep_lock_user_pages(sep, app_virt_in_addr, + data_size, &lli_in_array, SEP_DRIVER_IN_FLAG); + if (error) { + dev_warn(&sep->pdev->dev, "sep_lock_user_pages for " + "input virtual buffer failed\n"); + goto end_function; + } + + error = sep_lock_user_pages(sep, app_virt_out_addr, + data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG); + + if (error) { + dev_warn(&sep->pdev->dev, "sep_lock_user_pages for " + "output virtual buffer failed\n"); + goto end_function_free_lli_in; + } + } + + dev_dbg(&sep->pdev->dev, + "sep_in_num_pages is %x\n", + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages); + dev_dbg(&sep->pdev->dev, + "sep_out_num_pages is %x\n", + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages); + dev_dbg(&sep->pdev->dev, + "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n", + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); + + /* call the fucntion that creates table from the lli arrays */ + error = sep_construct_dma_tables_from_lli(sep, lli_in_array, + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages, + lli_out_array, + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages, + block_size, lli_table_in_ptr, lli_table_out_ptr, + in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr); + + if (error) { + dev_warn(&sep->pdev->dev, + "sep_construct_dma_tables_from_lli failed\n"); + goto end_function_with_error; + } + + kfree(lli_out_array); + kfree(lli_in_array); + +update_dcb_counter: + + /* update dcb counter */ + sep->nr_dcb_creat++; + + /* fall through - free the lli entry arrays */ + dev_dbg(&sep->pdev->dev, + "in_num_entries_ptr is %08x\n", *in_num_entries_ptr); + dev_dbg(&sep->pdev->dev, + "out_num_entries_ptr is %08x\n", *out_num_entries_ptr); + dev_dbg(&sep->pdev->dev, + "table_data_size_ptr is %08x\n", *table_data_size_ptr); + + goto end_function; + +end_function_with_error: + + kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_map_array); + kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_page_array); + kfree(lli_out_array); + + +end_function_free_lli_in: + + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array); + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array); + kfree(lli_in_array); + +end_function: + + dev_dbg(&sep->pdev->dev, + "sep_prepare_input_output_dma_table" + " end result = %d\n", error); + + return error; + +} + +/** + * sep_prepare_input_output_dma_table_in_dcb - + * This function prepares the linked dma tables and puts the + * address for the linked list of tables inta a dcb (data control + * block) the address of which is known by the sep hardware + * Note that all bus addresses that are passed to the sep + * are in 32 bit format; the SEP is a 32 bit device + * @app_in_address: unsigned long; for data buffer in (user space) + * @app_out_address: unsigned long; for data buffer out (user space) + * @data_in_size: u32; for size of data + * @block_size: u32; for block size + * @tail_block_size: u32; for size of tail block + * @isapplet: bool; to indicate external app + * @is_kva: bool; kernel buffer; only used for kernel crypto module + */ +static int sep_prepare_input_output_dma_table_in_dcb(struct sep_device *sep, + u32 app_in_address, + u32 app_out_address, + u32 data_in_size, + u32 block_size, + u32 tail_block_size, + bool isapplet, + bool is_kva) +{ + /* error */ + int error = 0; + + /* size of tail */ + u32 tail_size = 0; + + /* address of the created dcb table */ + struct sep_dcblock *dcb_table_ptr = 0; + + /* the physical address of the first input DMA table */ + dma_addr_t in_first_mlli_address = 0; + + /* number of entries in the first input DMA table */ + u32 in_first_num_entries = 0; + + /* the physical address of the first output DMA table */ + dma_addr_t out_first_mlli_address = 0; + + /* number of entries in the first output DMA table */ + u32 out_first_num_entries = 0; + + /* data in the first input/output table */ + u32 first_data_size = 0; + + dev_dbg(&sep->pdev->dev, + "prepare_input_output_dma_table_in_dcb start\n"); + + if (sep->nr_dcb_creat == SEP_MAX_NUM_SYNC_DMA_OPS) { + /*No more DCBS to allocate*/ + dev_warn(&sep->pdev->dev, "no more dcb's available\n"); + error = -ENOSPC; + goto end_function; + } + + /* allocate new DCB */ + dcb_table_ptr = (struct sep_dcblock *)(sep->shared_addr + + SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES + + (sep->nr_dcb_creat * sizeof(struct sep_dcblock))); + + /* set the default values in the dcb */ + dcb_table_ptr->input_mlli_address = 0; + dcb_table_ptr->input_mlli_num_entries = 0; + dcb_table_ptr->input_mlli_data_size = 0; + dcb_table_ptr->output_mlli_address = 0; + dcb_table_ptr->output_mlli_num_entries = 0; + dcb_table_ptr->output_mlli_data_size = 0; + dcb_table_ptr->tail_data_size = 0; + dcb_table_ptr->out_vr_tail_pt = 0; + + if (isapplet == true) { + tail_size = data_in_size % block_size; + + if (tail_size) { + + if (data_in_size < tail_block_size) { + dev_warn(&sep->pdev->dev, + "data in size smaller than tail" + " block size\n"); + error = -ENOSPC; + goto end_function; + } + + if (tail_block_size) + /* + * case the tail size should be + * bigger than the real block size + */ + tail_size = tail_block_size + + ((data_in_size - + tail_block_size) % block_size); + } + + /* check if there is enough data for dma operation */ + if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) { + if (is_kva == true) { + memcpy(dcb_table_ptr->tail_data, + (void *)app_in_address, data_in_size); + } + + else { + if (copy_from_user(dcb_table_ptr->tail_data, + (void __user *)app_in_address, + data_in_size)) { + error = -EFAULT; + goto end_function; + } + } + + dcb_table_ptr->tail_data_size = data_in_size; + + /* set the output user-space address for mem2mem op */ + if (app_out_address) + dcb_table_ptr->out_vr_tail_pt = + (u32)app_out_address; + + /* + * Update both data length parameters in order to avoid + * second data copy and allow building of empty mlli + * tables + */ + tail_size = 0x0; + data_in_size = 0x0; + } + + if (tail_size) { + if (is_kva == true) { + memcpy(dcb_table_ptr->tail_data, + (void *)(app_in_address + data_in_size - + tail_size), tail_size); + } + + else { + /* we have tail data - copy it to dcb */ + if (copy_from_user(dcb_table_ptr->tail_data, + (void *)(app_in_address + + data_in_size - tail_size), tail_size)) { + error = -EFAULT; + goto end_function; + } + } + + if (app_out_address) + /* + * Caclulate the output address + * according to tail data size + */ + dcb_table_ptr->out_vr_tail_pt = + app_out_address + data_in_size + - tail_size; + + /*save the real tail data size*/ + dcb_table_ptr->tail_data_size = tail_size; + /* + * Update the data size without the tail + * data size AKA data for the dma + */ + data_in_size = (data_in_size - tail_size); + } + } + + /* check if we need to build only input table or input/output */ + if (app_out_address) { + /* prepare input/output tables */ + error = sep_prepare_input_output_dma_table(sep, + app_in_address, + app_out_address, + data_in_size, + block_size, + &in_first_mlli_address, + &out_first_mlli_address, + &in_first_num_entries, + &out_first_num_entries, + &first_data_size, + is_kva); + } + + else { + /* prepare input tables */ + error = sep_prepare_input_dma_table(sep, + app_in_address, + data_in_size, + block_size, + &in_first_mlli_address, + &in_first_num_entries, + &first_data_size, + is_kva); + } + + if (error) { + dev_warn(&sep->pdev->dev, "prepare dma table call failed" + " from prepare dcb call\n"); + goto end_function; + } + + /* set the dcb values */ + dcb_table_ptr->input_mlli_address = in_first_mlli_address; + dcb_table_ptr->input_mlli_num_entries = in_first_num_entries; + dcb_table_ptr->input_mlli_data_size = first_data_size; + dcb_table_ptr->output_mlli_address = out_first_mlli_address; + dcb_table_ptr->output_mlli_num_entries = out_first_num_entries; + dcb_table_ptr->output_mlli_data_size = first_data_size; + +end_function: + + dev_dbg(&sep->pdev->dev, + "sep_prepare_input_output_dma_table_in_dcb end\n"); + return error; + +} + + +/** + * sep_create_sync_dma_tables_handler - + * this function handles tha request for creation of the DMA table + * for the synchronic symmetric operations (AES,DES) + * Note that all bus addresses that are passed to the sep + * are in 32 bit format; the SEP is a 32 bit device + * @sep: pointer to struct sep_device + * @arg: pointer to struct bld_syn_tab_struct +*/ +static int sep_create_sync_dma_tables_handler(struct sep_device *sep, + unsigned long arg) +{ + int error = 0; + + /* command arguments */ + struct bld_syn_tab_struct command_args; + + dev_dbg(&sep->pdev->dev, + "sep_create_sync_dma_tables_handler start\n"); + + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(struct bld_syn_tab_struct))) { + error = -EFAULT; + dev_warn(&sep->pdev->dev, "create dma tables;" + " copy_from_user fails\n"); + goto end_function; + } + + dev_dbg(&sep->pdev->dev, + "app_in_address is %08llx\n", command_args.app_in_address); + dev_dbg(&sep->pdev->dev, + "app_out_address is %08llx\n", command_args.app_out_address); + dev_dbg(&sep->pdev->dev, + "data_size is %u\n", command_args.data_in_size); + dev_dbg(&sep->pdev->dev, + "block_size is %u\n", command_args.block_size); + + /* validate user parameters */ + if (!command_args.app_in_address) { + + dev_warn(&sep->pdev->dev, + "params validation error\n"); + + error = -EINVAL; + goto end_function; + } + + error = sep_prepare_input_output_dma_table_in_dcb(sep, + command_args.app_in_address, + command_args.app_out_address, + command_args.data_in_size, + command_args.block_size, + 0x0, + false, + false); + +end_function: + + dev_dbg(&sep->pdev->dev, "sep_create_sync_dma_tables_handler end\n"); + return error; +} + +/** + * sep_free_dma_tables_and_dcb - + * This function frees the dma tables and dcb block + * @sep: pointer to struct sep_device + * @isapplet: indicates external application (used for kernel access) + * @is_kva: indicates kernel addresses (only used for kernel crypto) + */ +static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet, + bool is_kva) +{ + + int i = 0; + int error = 0; + int error_temp = 0; + + struct sep_dcblock *dcb_table_ptr; + + dev_dbg(&sep->pdev->dev, "sep_free_dma_tables_and_dcb start\n"); + + if (isapplet == true) { + + /* set pointer to first dcb table */ + dcb_table_ptr = (struct sep_dcblock *) + (sep->shared_addr + + SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES); + + /* go over each dcb and see if tail pointer must be updated */ + for (i = 0; i < sep->nr_dcb_creat; i++, dcb_table_ptr++) { + + if (dcb_table_ptr->out_vr_tail_pt) { + + if (is_kva == true) { + memcpy((void *)dcb_table_ptr->out_vr_tail_pt, + dcb_table_ptr->tail_data, + dcb_table_ptr->tail_data_size); + } + + else { + error_temp = copy_to_user( + (void *)dcb_table_ptr->out_vr_tail_pt, + dcb_table_ptr->tail_data, + dcb_table_ptr->tail_data_size); + } + + if (error_temp) { + /* release the dma resource */ + error = error_temp; + } + } + } + } + + /* free the output pages, if any */ + sep_free_dma_table_data_handler(sep); + + dev_dbg(&sep->pdev->dev, "sep_free_dma_tables_and_dcb end\n"); + return error; +} + +/** + * sep_get_static_pool_addr_handler - + * this function sets the bus and virtual addresses of the static pool + * and returns the virtual address + * @sep: pointer to struct sep_device + * @arg: parameters from user space application + */ +static int sep_get_static_pool_addr_handler(struct sep_device *sep, + unsigned long arg) +{ + struct stat_pool_addr_struct command_args; + + u32 *static_pool_addr = 0; + + unsigned long addr_hold; + + dev_dbg(&sep->pdev->dev, "sep_get_static_pool_addr_handler start\n"); + + static_pool_addr = (u32 *)(sep->shared_addr + + SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES); + + static_pool_addr[0] = SEP_STATIC_POOL_VAL_TOKEN; + static_pool_addr[1] = sep->shared_bus + + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES; + + addr_hold = (unsigned long) + (sep->shared_addr + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES); + command_args.static_virt_address = (aligned_u64)addr_hold; + + dev_dbg(&sep->pdev->dev, "static pool: physical %x virtual %x\n", + (u32)static_pool_addr[1], + (u32)command_args.static_virt_address); + + /* send the parameters to user application */ + if (copy_to_user((void __user *) arg, &command_args, + sizeof(struct stat_pool_addr_struct))) + return -EFAULT; + + dev_dbg(&sep->pdev->dev, "sep_get_static_pool_addr_handler end\n"); + + return 0; +} + +/** + * sep_start_handler - + * This function starts the sep device + * @sep: pointer to struct sep_device + */ +static int sep_start_handler(struct sep_device *sep) +{ + unsigned long reg_val; + unsigned long error = 0; + + dev_dbg(&sep->pdev->dev, "sep_start_handler start\n"); + + /* wait in polling for message from SEP */ + do + reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); + while (!reg_val); + + /* check the value */ + if (reg_val == 0x1) + /* fatal error - read error status from GPRO */ + error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); + dev_dbg(&sep->pdev->dev, "sep_start_handler end\n"); + return error; +} + +/** + * ep_check_sum_calc - + * This function performs a checsum for messages that are sent + * to the sep + * @data: + * @length: + */ +static u32 sep_check_sum_calc(u8 *data, u32 length) +{ + u32 sum = 0; + u16 *Tdata = (u16 *)data; + + while (length > 1) { + /* This is the inner loop */ + sum += *Tdata++; + length -= 2; + } + + /* Add left-over byte, if any */ + if (length > 0) + sum += *(u8 *)Tdata; + + /* Fold 32-bit sum to 16 bits */ + while (sum>>16) + sum = (sum & 0xffff) + (sum >> 16); + + return ~sum & 0xFFFF; +} + +/** + * sep_init_handler - + * this function handles the request for SEP initialization + * Note that this will go away for Medfield once the SCU + * SEP initialization is complete + * Also note that the message to the sep has components + * from user space as well as components written by the driver + * This is becuase the portions of the message that partain to + * physical addresses must be set by the driver after the message + * leaves custody of the user space application for security + * reasons. + * @sep: pointer to struct sep_device + * @arg: parameters from user space application + */ +static int sep_init_handler(struct sep_device *sep, unsigned long arg) +{ + u32 message_buff[14]; + u32 counter; + int error = 0; + u32 reg_val; + dma_addr_t new_base_addr; + unsigned long addr_hold; + struct init_struct command_args; + + dev_dbg(&sep->pdev->dev, "sep_init_handler start\n"); + error = 0; + + /* make sure that we have not initialized already */ + reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); + + if (reg_val != 0x2) { + error = SEP_ALREADY_INITIALIZED_ERR; + dev_warn(&sep->pdev->dev, + "init; device already initialized\n"); + goto end_function; + } + + /* only root can initialize */ + if (!capable(CAP_SYS_ADMIN)) { + dev_warn(&sep->pdev->dev, + "init; only root can init\n"); + error = -EACCES; + goto end_function; + } + + /* copy in the parameters */ + error = copy_from_user(&command_args, (void __user *)arg, + sizeof(struct init_struct)); + + if (error) { + dev_warn(&sep->pdev->dev, + "init; copy_from_user failed %x\n", error); + goto end_function; + } + + /* validate parameters */ + if (!command_args.message_addr || !command_args.sep_sram_addr || + command_args.message_size_in_words > 14) { + + dev_warn(&sep->pdev->dev, + "init; parameter error\n"); + error = -EINVAL; + goto end_function; + } + + /* copy in the sep init message */ + addr_hold = (unsigned long)command_args.message_addr; + error = copy_from_user(message_buff, + (void __user *)addr_hold, + command_args.message_size_in_words*sizeof(u32)); + + if (error) { + + dev_warn(&sep->pdev->dev, + "init; copy sep init message failed %x\n", error); + goto end_function; + } + + /* load resident, cache, and extapp firmware */ + error = sep_load_firmware(sep); + + if (error) { + + dev_warn(&sep->pdev->dev, + "init; copy sep init message failed %x\n", error); + goto end_function; + } + + /* compute the base address */ + new_base_addr = sep->shared_bus; + + if (sep->resident_bus < new_base_addr) + new_base_addr = sep->resident_bus; + + if (sep->cache_bus < new_base_addr) + new_base_addr = sep->cache_bus; + + if (sep->dcache_bus < new_base_addr) + new_base_addr = sep->dcache_bus; + + /* put physical addresses in sep message */ + message_buff[3] = (u32)new_base_addr; + message_buff[4] = (u32)sep->shared_bus; + message_buff[6] = (u32)sep->resident_bus; + message_buff[7] = (u32)sep->cache_bus; + message_buff[8] = (u32)sep->dcache_bus; + + message_buff[command_args.message_size_in_words - 1] = 0x0; + message_buff[command_args.message_size_in_words - 1] = + sep_check_sum_calc((u8 *)message_buff, + command_args.message_size_in_words*sizeof(u32)); + + /* debug print of message */ + for (counter = 0; counter < command_args.message_size_in_words; + counter++) + + dev_dbg(&sep->pdev->dev, + "init; sep message word %d is %x\n", + counter, message_buff[counter]); + + /* tell the sep the sram address */ + sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, command_args.sep_sram_addr); + + /* push the message to the sep */ + for (counter = 0; counter < command_args.message_size_in_words; + counter++) { + + sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR, + message_buff[counter]); + + sep_wait_sram_write(sep); + } + + /* signal sep that message is ready and to init */ + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1); + + /* wait for acknowledge */ + dev_dbg(&sep->pdev->dev, "init; waiting for msg response\n"); + + do + reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); + while (!(reg_val & 0xFFFFFFFD)); + + if (reg_val == 0x1) { + + dev_warn(&sep->pdev->dev, "init; device int failed\n"); + error = sep_read_reg(sep, 0x8060); + dev_warn(&sep->pdev->dev, "init; sw monitor is %x\n", error); + error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); + dev_warn(&sep->pdev->dev, "init; error is %x\n", error); + goto end_function; + } + + dev_dbg(&sep->pdev->dev, "init; end CC INIT, reg_val is %x\n", + reg_val); + + /* signal sep to zero the GPR3 */ + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x10); + + /* wait for response */ + dev_dbg(&sep->pdev->dev, "init; waiting for zero set response\n"); + + do + reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); + while (reg_val != 0); + + +end_function: + dev_dbg(&sep->pdev->dev, "init is done\n"); + return error; +} + +/** + * sep_end_transaction_handler - + * This API handles the end transaction request + * @sep: pointer to struct sep_device + */ +static int sep_end_transaction_handler(struct sep_device *sep) +{ + dev_dbg(&sep->pdev->dev, "sep_end_transaction_handler start\n"); + + /* clear the data pool pointers Token */ + memset((void *)(sep->shared_addr + + SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES), + 0, sep->num_of_data_allocations*2*sizeof(u32)); + + /* check that all the dma resources were freed */ + sep_free_dma_table_data_handler(sep); + + clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); + + /* + * we are now through with the transaction. Let's + * allow other processes who have the device open + * to perform transactions + */ + mutex_lock(&sep->sep_mutex); + sep->pid_doing_transaction = 0; + mutex_unlock(&sep->sep_mutex); + /* raise event for stuck contextes */ + wake_up(&sep->event); + + dev_dbg(&sep->pdev->dev, "waking up event\n"); + dev_dbg(&sep->pdev->dev, "sep_end_transaction_handler end\n"); + + return 0; +} + +/** + * sep_prepare_dcb_handler - + * This function will retrieve the RAR buffer physical addresses, type + * & size corresponding to the RAR handles provided in the buffers vector. + * @sep: pointer to struct sep_device + * @arg: pointer to user parameters + */ + +static int sep_prepare_dcb_handler(struct sep_device *sep, unsigned long arg) +{ + /* error */ + int error = 0; + + /* command arguments */ + struct build_dcb_struct command_args; + + dev_dbg(&sep->pdev->dev, "sep_prepare_dcb_handler start\n"); + + /* get the command arguments */ + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(struct build_dcb_struct))) { + error = -EFAULT; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, + "app_in_address is %08llx\n", command_args.app_in_address); + dev_dbg(&sep->pdev->dev, + "app_out_address is %08llx\n", command_args.app_out_address); + dev_dbg(&sep->pdev->dev, + "data_size is %x\n", command_args.data_in_size); + dev_dbg(&sep->pdev->dev, + "block_size is %x\n", command_args.block_size); + dev_dbg(&sep->pdev->dev, + "tail block_size is %x\n", command_args.tail_block_size); + + error = sep_prepare_input_output_dma_table_in_dcb(sep, + command_args.app_in_address, command_args.app_out_address, + command_args.data_in_size, command_args.block_size, + command_args.tail_block_size, true, false); + +end_function: + + dev_dbg(&sep->pdev->dev, "sep_prepare_dcb_handler end\n"); + return error; + +} + +/** + * sep_free_dcb_handler - + * this function frees the DCB resources + * and updates the needed user-space buffers + * @sep: pointer to struct sep_device + */ +static int sep_free_dcb_handler(struct sep_device *sep) +{ + int error ; + + dev_dbg(&sep->pdev->dev, "sep_prepare_dcb_handler start\n"); + dev_dbg(&sep->pdev->dev, "num of DCBs %x\n", sep->nr_dcb_creat); + + error = sep_free_dma_tables_and_dcb(sep, false, false); + + dev_dbg(&sep->pdev->dev, "sep_free_dcb_handler end\n"); + return error; +} + +/** + * sep_rar_prepare_output_msg_handler - + * This function will retrieve the RAR buffer physical addresses, type + * & size corresponding to the RAR handles provided in the buffers vector. + * @sep: pointer to struct sep_device + * @arg: pointer to user parameters + */ + +static int sep_rar_prepare_output_msg_handler(struct sep_device *sep, + unsigned long arg) +{ + /* error return code */ + int error = 0; + + /* command args */ + struct rar_hndl_to_bus_struct command_args; + struct RAR_buffer rar_buf; + + /* bus address */ + dma_addr_t rar_bus = 0; + + /* holds the RAR address in the system memory offset */ + u32 *rar_addr; + + dev_dbg(&sep->pdev->dev, + "sep_rar_prepare_output_msg_handler start\n"); + + /* copy the data */ + if (copy_from_user(&command_args, + (void __user *)arg, + sizeof(command_args))) { + error = -EFAULT; + goto end_function; + } + + /* call to translation function only if user handle is not NULL */ + if (command_args.rar_handle) { + + memset(&rar_buf, 0, sizeof(rar_buf)); + rar_buf.info.handle = (u32)command_args.rar_handle; + + if (rar_handle_to_bus(&rar_buf, 1) != 1) { + dev_dbg(&sep->pdev->dev, + "rar_handle_to_bus failure\n"); + error = -EFAULT; + goto end_function; + } + + rar_bus = rar_buf.bus_address; + } + + dev_dbg(&sep->pdev->dev, "rar msg; rar_addr_bus = %x\n", + (u32)rar_bus); + + /* set value in the SYSTEM MEMORY offset */ + rar_addr = (u32 *)(sep->shared_addr + + SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES); + + /* copy the physical address to the System Area for the sep */ + rar_addr[0] = SEP_RAR_VAL_TOKEN; + rar_addr[1] = rar_bus; + +end_function: + + dev_dbg(&sep->pdev->dev, + "sep_rar_prepare_output_msg_handler start\n"); + + return error; +} + +/** + * sep_realloc_ext_cache_handler - + * This function tells the sep where the extapp is located + * @sep: pointer to struct sep_device + * @arg: pointer to user parameters + */ +static int sep_realloc_ext_cache_handler(struct sep_device *sep, + unsigned long arg) +{ + /* holds the new ext cache address in the system memory offset */ + u32 *system_addr; + + /* set value in the SYSTEM MEMORY offset */ + system_addr = (u32 *)(sep->shared_addr + + SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES); + + /* copy the physical address to the System Area for the sep */ + + system_addr[0] = SEP_EXT_CACHE_ADDR_VAL_TOKEN; + dev_dbg(&sep->pdev->dev, + "ext cache init; system addr 0 is %x\n", system_addr[0]); + system_addr[1] = sep->extapp_bus; + dev_dbg(&sep->pdev->dev, + "ext cache init; system addr 1 is %x\n", system_addr[1]); + + return 0; +} + +/** + * sep_ioctl - ioctl api + * @filp: pointer to struct file + * @cmd: command + * @arg: pointer to argument structure + */ +static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + int error = 0; + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, "ioctl start\n"); + + dev_dbg(&sep->pdev->dev, "cmd is %x\n", cmd); + dev_dbg(&sep->pdev->dev, + "SEP_IOCSENDSEPCOMMAND is %x\n", SEP_IOCSENDSEPCOMMAND); + dev_dbg(&sep->pdev->dev, + "SEP_IOCALLOCDATAPOLL is %x\n", SEP_IOCALLOCDATAPOLL); + dev_dbg(&sep->pdev->dev, + "SEP_IOCCREATESYMDMATABLE is %x\n", SEP_IOCCREATESYMDMATABLE); + dev_dbg(&sep->pdev->dev, + "SEP_IOCFREEDMATABLEDATA is %x\n", SEP_IOCFREEDMATABLEDATA); + dev_dbg(&sep->pdev->dev, + "SEP_IOCSEPSTART is %x\n", SEP_IOCSEPSTART); + dev_dbg(&sep->pdev->dev, + "SEP_IOCSEPINIT is %x\n", SEP_IOCSEPINIT); + dev_dbg(&sep->pdev->dev, + "SEP_IOCGETSTATICPOOLADDR is %x\n", SEP_IOCGETSTATICPOOLADDR); + dev_dbg(&sep->pdev->dev, + "SEP_IOCENDTRANSACTION is %x\n", SEP_IOCENDTRANSACTION); + dev_dbg(&sep->pdev->dev, + "SEP_IOCREALLOCEXTCACHE is %x\n", SEP_IOCREALLOCEXTCACHE); + dev_dbg(&sep->pdev->dev, + "SEP_IOCRARPREPAREMESSAGE is %x\n", SEP_IOCRARPREPAREMESSAGE); + dev_dbg(&sep->pdev->dev, + "SEP_IOCPREPAREDCB is %x\n", SEP_IOCPREPAREDCB); + dev_dbg(&sep->pdev->dev, + "SEP_IOCFREEDCB is %x\n", SEP_IOCFREEDCB); + + /* make sure we own this device */ + mutex_lock(&sep->sep_mutex); + if ((current->pid != sep->pid_doing_transaction) && + (sep->pid_doing_transaction != 0)) { + + dev_dbg(&sep->pdev->dev, "ioctl pid is not owner\n"); + mutex_unlock(&sep->sep_mutex); + error = -EACCES; + goto end_function; + } + + mutex_unlock(&sep->sep_mutex); + + /* check that the command is for sep device */ + if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) { + error = -ENOTTY; + goto end_function; + } + + /* lock to prevent the daemon to interfere with operation */ + mutex_lock(&sep->ioctl_mutex); + + switch (cmd) { + case SEP_IOCSENDSEPCOMMAND: + /* send command to SEP */ + error = sep_send_command_handler(sep); + break; + case SEP_IOCALLOCDATAPOLL: + /* allocate data pool */ + error = sep_allocate_data_pool_memory_handler(sep, arg); + break; + case SEP_IOCCREATESYMDMATABLE: + /* create dma table for synhronic operation */ + error = sep_create_sync_dma_tables_handler(sep, arg); + break; + case SEP_IOCFREEDMATABLEDATA: + /* free the pages */ + error = sep_free_dma_table_data_handler(sep); + break; + case SEP_IOCSEPSTART: + /* start command to sep */ + if (sep->pdev->revision == 0) /* only for old chip */ + error = sep_start_handler(sep); + else + error = -EPERM; /* not permitted on new chip */ + break; + case SEP_IOCSEPINIT: + /* init command to sep */ + if (sep->pdev->revision == 0) /* only for old chip */ + error = sep_init_handler(sep, arg); + else + error = -EPERM; /* not permitted on new chip */ + break; + case SEP_IOCGETSTATICPOOLADDR: + /* get the physical and virtual addresses of the static pool */ + error = sep_get_static_pool_addr_handler(sep, arg); + break; + case SEP_IOCENDTRANSACTION: + error = sep_end_transaction_handler(sep); + break; + case SEP_IOCREALLOCEXTCACHE: + if (sep->mrst) + error = -ENODEV; + if (sep->pdev->revision == 0) /* only for old chip */ + error = sep_realloc_ext_cache_handler(sep, arg); + else + error = -EPERM; /* not permitted on new chip */ + break; + case SEP_IOCRARPREPAREMESSAGE: + error = sep_rar_prepare_output_msg_handler(sep, arg); + break; + case SEP_IOCPREPAREDCB: + error = sep_prepare_dcb_handler(sep, arg); + break; + case SEP_IOCFREEDCB: + error = sep_free_dcb_handler(sep); + break; + default: + dev_warn(&sep->pdev->dev, "invalid ioctl %x\n", cmd); + error = -ENOTTY; + break; + } + + mutex_unlock(&sep->ioctl_mutex); + +end_function: + + dev_dbg(&sep->pdev->dev, "ioctl end\n"); + return error; +} + +/** + * sep_singleton_ioctl - ioctl api for singleton interface + * @filp: pointer to struct file + * @cmd: command + * @arg: pointer to argument structure + */ +static long sep_singleton_ioctl(struct file *filp, u32 cmd, unsigned long arg) +{ + + /* error */ + long error; + struct sep_device *sep = filp->private_data; + + error = 0; + + dev_dbg(&sep->pdev->dev, + "singleton_ioctl start\n"); + + dev_dbg(&sep->pdev->dev, + "cmd is %x\n", cmd); + + /* check that the command is for sep device */ + if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) { + error = -ENOTTY; + goto end_function; + } + + /* make sure we own this device */ + mutex_lock(&sep->sep_mutex); + if ((current->pid != sep->pid_doing_transaction) && + (sep->pid_doing_transaction != 0)) { + + dev_dbg(&sep->pdev->dev, "singleton ioctl pid is not owner\n"); + mutex_unlock(&sep->sep_mutex); + error = -EACCES; + goto end_function; + } + + mutex_unlock(&sep->sep_mutex); + + switch (cmd) { + + case SEP_IOCTLSETCALLERID: + mutex_lock(&sep->ioctl_mutex); + error = sep_set_caller_id_handler(sep, arg); + mutex_unlock(&sep->ioctl_mutex); + break; + + default: + error = sep_ioctl(filp, cmd, arg); + break; + + } + +end_function: + + dev_dbg(&sep->pdev->dev, "singleton ioctl end\n"); + return error; +} + +/** + * sep_request_daemon_ioctl - ioctl for daemon + * @filp: pointer to struct file + * @cmd: command + * @arg: pointer to argument structure + * Called by the request daemon to perform ioctls on the daemon device + */ + +static long sep_request_daemon_ioctl(struct file *filp, u32 cmd, + unsigned long arg) +{ + + long error; + + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, + "daemon ioctl: start\n"); + + dev_dbg(&sep->pdev->dev, + "daemon ioctl: cmd is %x\n", cmd); + + /* check that the command is for sep device */ + if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) { + error = -ENOTTY; + goto end_function; + } + + /* only one process can access ioctl at any given time */ + mutex_lock(&sep->ioctl_mutex); + + switch (cmd) { + case SEP_IOCSENDSEPRPLYCOMMAND: + + /* send reply command to SEP */ + error = sep_req_daemon_send_reply_command_handler(sep); + break; + + case SEP_IOCENDTRANSACTION: + + /* + * end req daemon transaction, do nothing + * will be removed upon update in middleware + * API library + */ + error = 0; + break; + + default: + dev_dbg(&sep->pdev->dev, + "daemon ioctl: no such IOCTL\n"); + error = -ENOTTY; + } + + mutex_unlock(&sep->ioctl_mutex); + +end_function: + + dev_dbg(&sep->pdev->dev, + "daemon ioctl: end\n"); + return error; + +} + +/** + * sep_inthandler - Interrupt Handler + * @irq: interrupt + * @dev_id: device id + */ + +static irqreturn_t sep_inthandler(int irq, void *dev_id) +{ + irqreturn_t int_error = IRQ_HANDLED; + unsigned long lck_flags; + u32 reg_val, reg_val2 = 0; + struct sep_device *sep = dev_id; + + /* read the IRR register to check if this is SEP interrupt */ + reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR); + dev_dbg(&sep->pdev->dev, + "SEP Interrupt - reg is %08x\n", reg_val); + + if (reg_val & (0x1 << 13)) { + + /* lock and update the counter of reply messages */ + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + sep->reply_ct++; + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, "sep int: send_ct %lx reply_ct %lx\n", + sep->send_ct, sep->reply_ct); + + /* is this printf or daemon request? */ + reg_val2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); + dev_dbg(&sep->pdev->dev, + "SEP Interrupt - reg2 is %08x\n", reg_val2); + + if ((reg_val2 >> 30) & 0x1) { + + dev_dbg(&sep->pdev->dev, "int: printf request\n"); + wake_up(&sep->event_request_daemon); + } + + else if (reg_val2 >> 31) { + + dev_dbg(&sep->pdev->dev, "int: daemon request\n"); + wake_up(&sep->event_request_daemon); + } else { + + dev_dbg(&sep->pdev->dev, "int: sep reply\n"); + wake_up(&sep->event); + } + + } else { + + dev_dbg(&sep->pdev->dev, "int: not sep interrupt\n"); + int_error = IRQ_NONE; + } + + if (int_error == IRQ_HANDLED) + sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val); + + return int_error; +} + +/** + * sep_callback - + * Function that is called by rar_register when it is ready with + * a region (only for Moorestown) + * @sep_context_pointer: pointer to struct sep_device + */ +static int sep_callback(unsigned long sep_context_pointer) +{ + int error = 0; + struct sep_device *sep = + (struct sep_device *)sep_context_pointer; + + dma_addr_t rar_end_address = 0; + + dev_dbg(&sep->pdev->dev, "callback start\n"); + + error = rar_get_address(RAR_TYPE_IMAGE, &sep->rar_bus, + &rar_end_address); + + if (error) { + dev_warn(&sep->pdev->dev, "mrst cant get rar region\n"); + goto end_function; + } + + sep->rar_size = (size_t)(rar_end_address - sep->rar_bus + 1); + + if (!request_mem_region(sep->rar_bus, sep->rar_size, + "sep_sec_driver")) { + dev_warn(&sep->pdev->dev, + "request mem region for mrst failed\n"); + error = -1; + goto end_function; + } + + sep->rar_addr = ioremap_nocache(sep->rar_bus, sep->rar_size); + if (!sep->rar_addr) { + dev_warn(&sep->pdev->dev, + "ioremap nocache for mrst rar failed\n"); + error = -1; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, "rar start is %p, phy is %llx," + " size is %x\n", + sep->rar_addr, (unsigned long long)sep->rar_bus, + sep->rar_size); + +end_function: + + dev_dbg(&sep->pdev->dev, "callback end\n"); + return error; +} + +/** + * sep_probe - + * Function that is activated on the successful probe of the SEP device + * @pdev: pci_device + * @end: pci_device_id + */ +static int __devinit sep_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int error = 0; + struct sep_device *sep; + + pr_debug("Sep pci probe starting\n"); + if (sep_dev != NULL) { + dev_warn(&pdev->dev, "only one SEP supported.\n"); + return -EBUSY; + } + + /* enable the device */ + error = pci_enable_device(pdev); + if (error) { + dev_warn(&pdev->dev, "error enabling pci device\n"); + goto end_function; + } + + /* allocate the sep_device structure for this device */ + sep_dev = kmalloc(sizeof(struct sep_device), GFP_ATOMIC); + + if (sep_dev == NULL) { + dev_warn(&pdev->dev, + "can't kmalloc the sep_device structure\n"); + return -ENOMEM; + } + + /* zero out sep structure */ + memset((void *)sep_dev, 0, sizeof(struct sep_device)); + + /* + * we're going to use another variable for actually + * working with the device; this way, if we have + * multiple devices in the future, it would be easier + * to make appropriate changes + */ + sep = sep_dev; + + sep->pdev = pdev; + + if (pdev->device == MRST_PCI_DEVICE_ID) + sep->mrst = 1; + else + sep->mrst = 0; + + dev_dbg(&sep->pdev->dev, "PCI obtained, device being prepared\n"); + dev_dbg(&sep->pdev->dev, "revision is %d\n", sep->pdev->revision); + + /* set up our register area */ + sep->reg_physical_addr = pci_resource_start(sep->pdev, 0); + if (!sep->reg_physical_addr) { + dev_warn(&sep->pdev->dev, "Error getting register start\n"); + pci_dev_put(sep->pdev); + return -ENODEV; + } + + sep->reg_physical_end = pci_resource_end(sep->pdev, 0); + if (!sep->reg_physical_end) { + dev_warn(&sep->pdev->dev, "Error getting register end\n"); + pci_dev_put(sep->pdev); + return -ENODEV; + } + + sep->reg_addr = ioremap_nocache(sep->reg_physical_addr, + (size_t)(sep->reg_physical_end - sep->reg_physical_addr + 1)); + if (!sep->reg_addr) { + dev_warn(&sep->pdev->dev, "Error getting register virtual\n"); + pci_dev_put(sep->pdev); + return -ENODEV; + } + + dev_dbg(&sep->pdev->dev, + "Register area start %llx end %llx virtual %p\n", + (unsigned long long)sep->reg_physical_addr, + (unsigned long long)sep->reg_physical_end, + sep->reg_addr); + + /* allocate the shared area */ + sep->shared_size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES + + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES; + + if (sep_map_and_alloc_shared_area(sep)) { + error = -ENOMEM; + /* allocation failed */ + goto end_function_error; + } + + /* the next section depends on type of unit */ + if (sep->mrst) { + error = register_rar(RAR_TYPE_IMAGE, &sep_callback, + (unsigned long)sep); + if (error) { + dev_dbg(&sep->pdev->dev, + "error register_rar\n"); + goto end_function_deallocate_sep_shared_area; + } + } else { + + sep->rar_size = FAKE_RAR_SIZE; + sep->rar_addr = dma_alloc_coherent(NULL, + sep->rar_size, &sep->rar_bus, GFP_KERNEL); + if (sep->rar_addr == NULL) { + dev_warn(&sep->pdev->dev, "cant allocate mfld rar\n"); + error = -ENOMEM; + goto end_function_deallocate_sep_shared_area; + } + + dev_dbg(&sep->pdev->dev, "rar start is %p, phy is %llx," + " size is %x\n", sep->rar_addr, + (unsigned long long)sep->rar_bus, + sep->rar_size); + } + + dev_dbg(&sep->pdev->dev, + "about to write IMR and ICR REG_ADDR\n"); + + /* clear ICR register */ + sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF); + + /* set the IMR register - open only GPR 2 */ + sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); + + dev_dbg(&sep->pdev->dev, + "about to call request_irq\n"); + /* get the interrupt line */ + error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED, + "sep_driver", sep); + + if (error) + goto end_function_free_res; + + goto end_function; + +end_function_free_res: + if (sep->rar_addr) + dma_free_coherent(&sep->pdev->dev, sep->rar_size, + sep->rar_addr, sep->rar_bus); + goto end_function; + +end_function_deallocate_sep_shared_area: + /* de-allocate shared area */ + sep_unmap_and_free_shared_area(sep); + +end_function_error: + iounmap(sep->reg_addr); + kfree(sep_dev); + sep_dev = NULL; + +end_function: + return error; +} + +static DEFINE_PCI_DEVICE_TABLE(sep_pci_id_tbl) = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MRST_PCI_DEVICE_ID)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MFLD_PCI_DEVICE_ID)}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl); + +/* field for registering driver to PCI device */ +static struct pci_driver sep_pci_driver = { + .name = "sep_sec_driver", + .id_table = sep_pci_id_tbl, + .probe = sep_probe + /* FIXME: remove handler */ +}; + +/* file operation for singleton sep operations */ +static const struct file_operations singleton_file_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = sep_singleton_ioctl, + .poll = sep_poll, + .open = sep_singleton_open, + .release = sep_singleton_release, + .mmap = sep_mmap, +}; + +/* file operation for daemon operations */ +static const struct file_operations daemon_file_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = sep_request_daemon_ioctl, + .poll = sep_request_daemon_poll, + .open = sep_request_daemon_open, + .release = sep_request_daemon_release, + .mmap = sep_request_daemon_mmap, +}; + +/* the files operations structure of the driver */ +static const struct file_operations sep_file_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = sep_ioctl, + .poll = sep_poll, + .open = sep_open, + .release = sep_release, + .mmap = sep_mmap, +}; + +/** + * sep_reconfig_shared_area - + * reconfig the shared area between HOST and SEP - needed in case + * the DX_CC_Init function was called before OS loading + * @sep: pointer to struct sep_device + */ +static int sep_reconfig_shared_area(struct sep_device *sep) +{ + int ret_val = 0; + + dev_dbg(&sep->pdev->dev, "reconfig shared area start\n"); + + /* send the new SHARED MESSAGE AREA to the SEP */ + dev_dbg(&sep->pdev->dev, "sending %08llx to sep\n", + (unsigned long long)sep->shared_bus); + + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, + sep->shared_bus); + + /* poll for SEP response */ + ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); + + while (ret_val != 0xffffffff && + ret_val != sep->shared_bus) { + + ret_val = sep_read_reg(sep, + HW_HOST_SEP_HOST_GPR1_REG_ADDR); + } + + /* check the return value (register) */ + if (ret_val != sep->shared_bus) { + dev_warn(&sep->pdev->dev, "could not reconfig shared area\n"); + dev_warn(&sep->pdev->dev, "result was %x\n", ret_val); + ret_val = -ENOMEM; + } + + else { + ret_val = 0; + } + + dev_dbg(&sep->pdev->dev, "reconfig shared area end\n"); + return ret_val; +} + +/** + * sep_register_driver_to_fs - + * This function registers the driver to the file system + * @sep: pointer to struct sep_device + */ +static int sep_register_driver_to_fs(struct sep_device *sep) +{ + int ret_val = 0; + + sep->miscdev_sep.minor = MISC_DYNAMIC_MINOR; + sep->miscdev_sep.name = SEP_DEV_NAME; + sep->miscdev_sep.fops = &sep_file_operations; + + sep->miscdev_singleton.minor = MISC_DYNAMIC_MINOR; + sep->miscdev_singleton.name = SEP_DEV_SINGLETON; + sep->miscdev_singleton.fops = &singleton_file_operations; + + sep->miscdev_daemon.minor = MISC_DYNAMIC_MINOR; + sep->miscdev_daemon.name = SEP_DEV_DAEMON; + sep->miscdev_daemon.fops = &daemon_file_operations; + + ret_val = misc_register(&sep->miscdev_sep); + if (ret_val) { + dev_warn(&sep->pdev->dev, "misc reg fails for sep %x\n", + ret_val); + return ret_val; + } + + ret_val = misc_register(&sep->miscdev_singleton); + if (ret_val) { + dev_warn(&sep->pdev->dev, "misc reg fails for sing %x\n", + ret_val); + misc_deregister(&sep->miscdev_sep); + return ret_val; + } + + if (!sep->mrst) { + ret_val = misc_register(&sep->miscdev_daemon); + if (ret_val) { + dev_warn(&sep->pdev->dev, + "misc reg fails for dmn %x\n", + ret_val); + misc_deregister(&sep->miscdev_sep); + misc_deregister(&sep->miscdev_singleton); + + return ret_val; + } + } + + return ret_val; +} + +/** + * sep_init - init function; this is the first thing called on boot + */ +static int __init sep_init(void) +{ + int ret_val = 0; + struct sep_device *sep = NULL; + + pr_debug("Sep driver: Init start\n"); + + ret_val = pci_register_driver(&sep_pci_driver); + if (ret_val) { + pr_debug("sep_driver:sep_driver_to_device failed," + " ret_val is %d\n", ret_val); + goto end_function; + } + + sep = sep_dev; + + init_waitqueue_head(&sep->event); + init_waitqueue_head(&sep->event_request_daemon); + spin_lock_init(&sep->snd_rply_lck); + mutex_init(&sep->sep_mutex); + mutex_init(&sep->ioctl_mutex); + + if (sep->mrst == 0) { + ret_val = sep_init_caller_id(sep); + if (ret_val) { + dev_warn(&sep->pdev->dev, + "cant init caller id\n"); + goto end_function_unregister_pci; + } + + } + + /* new chip requires share area reconfigure */ + if (sep->pdev->revision == 4) { /* only for new chip */ + ret_val = sep_reconfig_shared_area(sep); + if (ret_val) + goto end_function_unregister_pci; + } + + /* register driver to fs */ + ret_val = sep_register_driver_to_fs(sep); + if (ret_val) { + dev_warn(&sep->pdev->dev, + "error registering device to file\n"); + goto end_function_unregister_pci; + } + + goto end_function; + +end_function_unregister_pci: + pci_unregister_driver(&sep_pci_driver); + +end_function: + dev_dbg(&sep->pdev->dev, "Init end\n"); + return ret_val; +} + + +/** + * sep_exit - called to unload driver (never called on static compile) + */ +static void __exit sep_exit(void) +{ + struct sep_device *sep; + + sep = sep_dev; + pr_debug("Exit start\n"); + + /* unregister from fs */ + misc_deregister(&sep->miscdev_sep); + misc_deregister(&sep->miscdev_singleton); + misc_deregister(&sep->miscdev_daemon); + + /* free the irq */ + free_irq(sep->pdev->irq, sep); + + /* unregister the driver */ + pci_unregister_driver(&sep_pci_driver); + + /* free shared area */ + if (sep_dev) { + sep_unmap_and_free_shared_area(sep_dev); + dev_dbg(&sep->pdev->dev, + "free pages SEP SHARED AREA\n"); + iounmap((void *) sep_dev->reg_addr); + dev_dbg(&sep->pdev->dev, + "iounmap\n"); + } + pr_debug("release_mem_region\n"); + pr_debug("Exit end\n"); +} + + +module_init(sep_init); +module_exit(sep_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/sep/sep_driver_api.h b/drivers/staging/sep/sep_driver_api.h new file mode 100644 index 0000000..1207722 --- /dev/null +++ b/drivers/staging/sep/sep_driver_api.h @@ -0,0 +1,309 @@ +/* + * + * sep_driver_api.h - Security Processor Driver api definitions + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2010.09.14 Upgrade to Medfield + * + */ + +#ifndef __SEP_DRIVER_API_H__ +#define __SEP_DRIVER_API_H__ + +/* Type of request from device */ +#define SEP_DRIVER_SRC_REPLY 1 +#define SEP_DRIVER_SRC_REQ 2 +#define SEP_DRIVER_SRC_PRINTF 3 + + +/*------------------------------------------- + TYPEDEFS +----------------------------------------------*/ + +/* + * Note that several members of these structres are only here + * for campatability with the middleware; they are not used + * by this driver. + * All user space buffer addresses are set to aligned u64 + * in order to ensure compatibility with 64 bit systems + */ + +/* + init command struct; this will go away when SCU does init +*/ +struct init_struct { + /* address that SEP can access for message */ + aligned_u64 message_addr; + + /* message size */ + u32 message_size_in_words; + + /* offset of the init message in the sep sram */ + aligned_u64 sep_sram_addr; + + /* -not used- resident size in bytes*/ + u32 unused_resident_size_in_bytes; + + /* -not used- cache size in bytes*/ + u32 unused_cache_size_in_bytes; + + /* -not used- ext cache current address */ + aligned_u64 unused_extcache_addr; + + /* -not used- ext cache size in bytes*/ + u32 unused_extcache_size_in_bytes; +}; + +struct realloc_ext_struct { + /* -not used- current external cache address */ + aligned_u64 unused_ext_cache_addr; + + /* -not used- external cache size in bytes*/ + u32 unused_ext_cache_size_in_bytes; +}; + +struct alloc_struct { + /* offset from start of shared pool area */ + u32 offset; + /* number of bytes to allocate */ + u32 num_bytes; +}; + +/* + Note that all app addresses are cast as u32; the sep + middleware sends them as fixed 32 bit words +*/ +struct bld_syn_tab_struct { + /* address value of the data in (user space addr) */ + aligned_u64 app_in_address; + + /* size of data in */ + u32 data_in_size; + + /* address of the data out (user space addr) */ + aligned_u64 app_out_address; + + /* the size of the block of the operation - if needed, + every table will be modulo this parameter */ + u32 block_size; + + /* -not used- distinct user/kernel layout */ + bool isKernelVirtualAddress; + +}; + +/* + * command struct for static pool addresses + * Please note that this is a kernel virtual + * address; this will be removed at the next + * release of the Discretix middleware + */ +struct stat_pool_addr_struct { + /* virtual address of the static pool */ + aligned_u64 static_virt_address; +}; + + +/* command struct for getting caller id value and address */ +struct caller_id_struct { + /* pid of the process */ + u32 pid; + /* virtual address of the caller id hash */ + aligned_u64 callerIdAddress; + /* caller id hash size in bytes */ + u32 callerIdSizeInBytes; +}; + +/* + structure that represents DCB +*/ +struct sep_dcblock { + /* physical address of the first input mlli */ + u32 input_mlli_address; + /* num of entries in the first input mlli */ + u32 input_mlli_num_entries; + /* size of data in the first input mlli */ + u32 input_mlli_data_size; + /* physical address of the first output mlli */ + u32 output_mlli_address; + /* num of entries in the first output mlli */ + u32 output_mlli_num_entries; + /* size of data in the first output mlli */ + u32 output_mlli_data_size; + /* pointer to the output virtual tail */ + u32 out_vr_tail_pt; + /* size of tail data */ + u32 tail_data_size; + /* input tail data array */ + u8 tail_data[64]; +}; + +struct sep_caller_id_entry { + int pid; + unsigned char callerIdHash[SEP_CALLER_ID_HASH_SIZE_IN_BYTES]; +}; + +/* + command structure for building dcb block (currently for ext app only +*/ +struct build_dcb_struct { + /* address value of the data in */ + aligned_u64 app_in_address; + /* size of data in */ + u32 data_in_size; + /* address of the data out */ + aligned_u64 app_out_address; + /* the size of the block of the operation - if needed, + every table will be modulo this parameter */ + u32 block_size; + /* the size of the block of the operation - if needed, + every table will be modulo this parameter */ + u32 tail_block_size; +}; + +/** + * @struct sep_dma_map + * + * Structure that contains all information needed for mapping the user pages + * or kernel buffers for dma operations + * + * + */ +struct sep_dma_map { + /* mapped dma address */ + dma_addr_t dma_addr; + /* size of the mapped data */ + size_t size; +}; + +struct sep_dma_resource { + /* array of pointers to the pages that represent + input data for the synchronic DMA action */ + struct page **in_page_array; + + /* array of pointers to the pages that represent out + data for the synchronic DMA action */ + struct page **out_page_array; + + /* number of pages in the sep_in_page_array */ + u32 in_num_pages; + + /* number of pages in the sep_out_page_array */ + u32 out_num_pages; + + /* map array of the input data */ + struct sep_dma_map *in_map_array; + + /* map array of the output data */ + struct sep_dma_map *out_map_array; + + /* number of entries of the input mapp array */ + u32 in_map_num_entries; + + /* number of entries of the output mapp array */ + u32 out_map_num_entries; +}; + + +/* command struct for translating rar handle to bus address + and setting it at predefined location */ +struct rar_hndl_to_bus_struct { + + /* rar handle */ + aligned_u64 rar_handle; +}; + +/* + structure that represent one entry in the DMA LLI table +*/ +struct sep_lli_entry { + /* physical address */ + u32 bus_address; + + /* block size */ + u32 block_size; +}; + +/*---------------------------------------------------------------- + IOCTL command defines + -----------------------------------------------------------------*/ + +/* magic number 1 of the sep IOCTL command */ +#define SEP_IOC_MAGIC_NUMBER 's' + +/* sends interrupt to sep that message is ready */ +#define SEP_IOCSENDSEPCOMMAND \ + _IO(SEP_IOC_MAGIC_NUMBER, 0) + +/* sends interrupt to sep that message is ready */ +#define SEP_IOCSENDSEPRPLYCOMMAND \ + _IO(SEP_IOC_MAGIC_NUMBER, 1) + +/* allocate memory in data pool */ +#define SEP_IOCALLOCDATAPOLL \ + _IOW(SEP_IOC_MAGIC_NUMBER, 2, struct alloc_struct) + +/* create sym dma lli tables */ +#define SEP_IOCCREATESYMDMATABLE \ + _IOW(SEP_IOC_MAGIC_NUMBER, 5, struct bld_syn_tab_struct) + +/* free dynamic data aalocated during table creation */ +#define SEP_IOCFREEDMATABLEDATA \ + _IO(SEP_IOC_MAGIC_NUMBER, 7) + +/* get the static pool area addersses (physical and virtual) */ +#define SEP_IOCGETSTATICPOOLADDR \ + _IOR(SEP_IOC_MAGIC_NUMBER, 8, struct stat_pool_addr_struct) + +/* start sep command */ +#define SEP_IOCSEPSTART \ + _IO(SEP_IOC_MAGIC_NUMBER, 12) + +/* init sep command */ +#define SEP_IOCSEPINIT \ + _IOW(SEP_IOC_MAGIC_NUMBER, 13, struct init_struct) + +/* end transaction command */ +#define SEP_IOCENDTRANSACTION \ + _IO(SEP_IOC_MAGIC_NUMBER, 15) + +/* reallocate external app; unused structure still needed for + * compatability with middleware */ +#define SEP_IOCREALLOCEXTCACHE \ + _IOW(SEP_IOC_MAGIC_NUMBER, 18, struct realloc_ext_struct) + +#define SEP_IOCRARPREPAREMESSAGE \ + _IOW(SEP_IOC_MAGIC_NUMBER, 20, struct rar_hndl_to_bus_struct) + +#define SEP_IOCTLSETCALLERID \ + _IOW(SEP_IOC_MAGIC_NUMBER, 34, struct caller_id_struct) + +#define SEP_IOCPREPAREDCB \ + _IOW(SEP_IOC_MAGIC_NUMBER, 35, struct build_dcb_struct) + +#define SEP_IOCFREEDCB \ + _IO(SEP_IOC_MAGIC_NUMBER, 36) + +#endif diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h new file mode 100644 index 0000000..686a353 --- /dev/null +++ b/drivers/staging/sep/sep_driver_config.h @@ -0,0 +1,428 @@ +/* + * + * sep_driver_config.h - Security Processor Driver configuration + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2010.06.26 Upgrade to Medfield + * + */ + +#ifndef __SEP_DRIVER_CONFIG_H__ +#define __SEP_DRIVER_CONFIG_H__ + + +/*-------------------------------------- + DRIVER CONFIGURATION FLAGS + -------------------------------------*/ + +/* if flag is on , then the driver is running in polling and + not interrupt mode */ +#define SEP_DRIVER_POLLING_MODE 0 + +/* flag which defines if the shared area address should be + reconfiged (send to SEP anew) during init of the driver */ +#define SEP_DRIVER_RECONFIG_MESSAGE_AREA 0 + +/* the mode for running on the ARM1172 Evaluation platform (flag is 1) */ +#define SEP_DRIVER_ARM_DEBUG_MODE 0 + +/*------------------------------------------- + INTERNAL DATA CONFIGURATION + -------------------------------------------*/ + +/* flag for the input array */ +#define SEP_DRIVER_IN_FLAG 0 + +/* flag for output array */ +#define SEP_DRIVER_OUT_FLAG 1 + +/* maximum number of entries in one LLI tables */ +#define SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP 31 + +/* minimum data size of the MLLI table */ +#define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE 16 + +/* flag that signifies tah the lock is +currently held by the proccess (struct file) */ +#define SEP_DRIVER_OWN_LOCK_FLAG 1 + +/* flag that signifies tah the lock is currently NOT +held by the proccess (struct file) */ +#define SEP_DRIVER_DISOWN_LOCK_FLAG 0 + +/* indicates whether driver has mapped/unmapped shared area */ +#define SEP_REQUEST_DAEMON_MAPPED 1 +#define SEP_REQUEST_DAEMON_UNMAPPED 0 + +/*-------------------------------------------------------- + SHARED AREA memory total size is 36K + it is divided is following: + + SHARED_MESSAGE_AREA 8K } + } + STATIC_POOL_AREA 4K } MAPPED AREA ( 24 K) + } + DATA_POOL_AREA 12K } + + SYNCHRONIC_DMA_TABLES_AREA 5K + + placeholder until drver changes + FLOW_DMA_TABLES_AREA 4K + + SYSTEM_MEMORY_AREA 3k + + SYSTEM_MEMORY total size is 3k + it is divided as following: + + TIME_MEMORY_AREA 8B +-----------------------------------------------------------*/ + +#define SEP_DEV_NAME "sep_sec_driver" +#define SEP_DEV_SINGLETON "sep_sec_singleton_driver" +#define SEP_DEV_DAEMON "sep_req_daemon_driver" + + +/* + the maximum length of the message - the rest of the message shared + area will be dedicated to the dma lli tables +*/ +#define SEP_DRIVER_MAX_MESSAGE_SIZE_IN_BYTES (8 * 1024) + +/* the size of the message shared area in pages */ +#define SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES (8 * 1024) + +/* the size of the data pool static area in pages */ +#define SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES (4 * 1024) + +/* the size of the data pool shared area size in pages */ +#define SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES (16 * 1024) + +/* the size of the message shared area in pages */ +#define SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES (1024 * 5) + +/* Placeholder until driver changes */ +#define SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 4) + +/* system data (time, caller id etc') pool */ +#define SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES (1024 * 3) + +/* the size in bytes of the time memory */ +#define SEP_DRIVER_TIME_MEMORY_SIZE_IN_BYTES 8 + +/* the size in bytes of the RAR parameters memory */ +#define SEP_DRIVER_SYSTEM_RAR_MEMORY_SIZE_IN_BYTES 8 + +/* area size that is mapped - we map the MESSAGE AREA, STATIC POOL and + DATA POOL areas. area must be module 4k */ +#define SEP_DRIVER_MMMAP_AREA_SIZE (1024 * 28) + +/*----------------------------------------------- + offsets of the areas starting from the shared area start address +*/ + +/* message area offset */ +#define SEP_DRIVER_MESSAGE_AREA_OFFSET_IN_BYTES 0 + +/* static pool area offset */ +#define SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES \ + (SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES) + +/* data pool area offset */ +#define SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES \ + (SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES + \ + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES) + +/* synhronic dma tables area offset */ +#define SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES \ + (SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + \ + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) + +/* system memory offset in bytes */ +#define SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES \ + (SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + \ + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES) + +/* offset of the time area */ +#define SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES \ + (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES) + +/* offset of the RAR area */ +#define SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES \ + (SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES + \ + SEP_DRIVER_TIME_MEMORY_SIZE_IN_BYTES) + +/* offset of the caller id area */ +#define SEP_CALLER_ID_OFFSET_BYTES \ + (SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES + \ + SEP_DRIVER_SYSTEM_RAR_MEMORY_SIZE_IN_BYTES) + +/* offset of the DCB area */ +#define SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES \ + (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES + \ + 0x400) + +/* offset of the ext cache area */ +#define SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES \ + SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES + +/* offset of the allocation data pointer area */ +#define SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES \ + (SEP_CALLER_ID_OFFSET_BYTES + \ + SEP_CALLER_ID_HASH_SIZE_IN_BYTES) + +/* the token that defines the start of time address */ +#define SEP_TIME_VAL_TOKEN 0x12345678 + +#define FAKE_RAR_SIZE (1024*1024) /* used only for mfld */ +/* DEBUG LEVEL MASKS */ + +/* size of the caller id hash (sha2) */ +#define SEP_CALLER_ID_HASH_SIZE_IN_BYTES 32 + +/* maximum number of entries in the caller id table */ +#define SEP_CALLER_ID_TABLE_NUM_ENTRIES 20 + +/* maximum number of symetric operation (that require DMA resource) + per one message */ +#define SEP_MAX_NUM_SYNC_DMA_OPS 16 + +/* the token that defines the start of time address */ +#define SEP_RAR_VAL_TOKEN 0xABABABAB + +/* ioctl error that should be returned when trying + to realloc the cache/resident second time */ +#define SEP_ALREADY_INITIALIZED_ERR 12 + +/* bit that locks access to the shared area */ +#define SEP_MMAP_LOCK_BIT 0 + +/* bit that lock access to the poll - after send_command */ +#define SEP_SEND_MSG_LOCK_BIT 1 + +/* the token that defines the static pool address address */ +#define SEP_STATIC_POOL_VAL_TOKEN 0xABBAABBA + +/* the token that defines the data pool pointers address */ +#define SEP_DATA_POOL_POINTERS_VAL_TOKEN 0xEDDEEDDE + +/* the token that defines the data pool pointers address */ +#define SEP_EXT_CACHE_ADDR_VAL_TOKEN 0xBABABABA + +/* rar handler */ +#ifndef CONFIG_MRST_RAR_HANDLER + +/* This stub header is for non Moorestown driver only */ + +/* + * Constants that specify different kinds of RAR regions that could be + * set up. + */ +static __u32 const RAR_TYPE_VIDEO; /* 0 */ +static __u32 const RAR_TYPE_AUDIO = 1; +static __u32 const RAR_TYPE_IMAGE = 2; +static __u32 const RAR_TYPE_DATA = 3; + +/* + * @struct RAR_stat + * + * @brief This structure is used for @c RAR_HANDLER_STAT ioctl and for + * @c RAR_get_stat() user space wrapper function. + */ +struct RAR_stat { + /* Type of RAR memory (e.g., audio vs. video) */ + __u32 type; + + /* + * Total size of RAR memory region. + */ + __u32 capacity; + + /* Size of the largest reservable block. */ + __u32 largest_block_size; +}; + + +/* + * @struct RAR_block_info + * + * @brief The argument for the @c RAR_HANDLER_RESERVE @c ioctl. + * + */ +struct RAR_block_info { + /* Type of RAR memory (e.g., audio vs. video) */ + __u32 type; + + /* Requested size of a block to be reserved in RAR. */ + __u32 size; + + /* Handle that can be used to refer to reserved block. */ + __u32 handle; +}; + +/* + * @struct RAR_buffer + * + * Structure that contains all information related to a given block of + * memory in RAR. It is generally only used when retrieving bus + * addresses. + * + * @note This structure is used only by RAR-enabled drivers, and is + * not intended to be exposed to the user space. + */ +struct RAR_buffer { + /* Structure containing base RAR buffer information */ + struct RAR_block_info info; + + /* Buffer bus address */ + __u32 bus_address; +}; + + +#define RAR_IOCTL_BASE 0xE0 + +/* Reserve RAR block. */ +#define RAR_HANDLER_RESERVE _IOWR(RAR_IOCTL_BASE, 0x00, struct RAR_block_info) + +/* Release previously reserved RAR block. */ +#define RAR_HANDLER_RELEASE _IOW(RAR_IOCTL_BASE, 0x01, __u32) + +/* Get RAR stats. */ +#define RAR_HANDLER_STAT _IOWR(RAR_IOCTL_BASE, 0x02, struct RAR_stat) + + +/* -------------------------------------------------------------- */ +/* Kernel Side RAR Handler Interface */ +/* -------------------------------------------------------------- */ + +/* + * @function rar_reserve + * + * @brief Reserve RAR buffers. + * + * This function will reserve buffers in the restricted access regions + * of given types. + * + * @return Number of successfully reserved buffers. + * Successful buffer reservations will have the corresponding + * @c bus_address field set to a non-zero value in the + * given @a buffers vector. + */ +#define rar_reserve(a, b) ((size_t)NULL) + +/* + * @function rar_release + * + * @brief Release RAR buffers retrieved through call to + * @c rar_reserve() or @c rar_handle_to_bus(). + * + * This function will release RAR buffers that were retrieved through + * a call to @c rar_reserve() or @c rar_handle_to_bus() by + * decrementing the reference count. The RAR buffer will be reclaimed + * when the reference count drops to zero. + * + * @return Number of successfully released buffers. + * Successful releases will have their handle field set to + * zero in the given @a buffers vector. + */ +#define rar_release(a, b) ((size_t)NULL) + +/* + * @function rar_handle_to_bus + * + * @brief Convert a vector of RAR handles to bus addresses. + * + * This function will retrieve the RAR buffer bus addresses, type and + * size corresponding to the RAR handles provided in the @a buffers + * vector. + * + * @return Number of successfully converted buffers. + * The bus address will be set to @c 0 for unrecognized + * handles. + * + * @note The reference count for each corresponding buffer in RAR will + * be incremented. Call @c rar_release() when done with the + * buffers. + */ +#define rar_handle_to_bus(a, b) ((size_t)NULL) + +#else /* using rear memrar */ + +#include "../memrar/memrar.h" + +#endif /* MEMRAR */ + +/* rar_register */ +#ifndef CONFIG_RAR_REGISTER +/* This stub header is for non Moorestown driver only */ + +/* The register_rar function is to used by other device drivers + * to ensure that this driver is ready. As we cannot be sure of + * the compile/execute order of dirvers in ther kernel, it is + * best to give this driver a callback function to call when + * it is ready to give out addresses. The callback function + * would have those steps that continue the initialization of + * a driver that do require a valid RAR address. One of those + * steps would be to call get_rar_address() + * This function return 0 on success an -1 on failure. + */ +#define register_rar(a, b, c) (-ENODEV) + +/* The get_rar_address function is used by other device drivers + * to obtain RAR address information on a RAR. It takes two + * parameter: + * + * int rar_index + * The rar_index is an index to the rar for which you wish to retrieve + * the address information. + * Values can be 0,1, or 2. + * + * struct RAR_address_struct is a pointer to a place to which the function + * can return the address structure for the RAR. + * + * The function returns a 0 upon success or a -1 if there is no RAR + * facility on this system. + */ +#define rar_get_address(a, b, c) (-ENODEV) + +/* The lock_rar function is ued by other device drivers to lock an RAR. + * once an RAR is locked, it stays locked until the next system reboot. + * The function takes one parameter: + * + * int rar_index + * The rar_index is an index to the rar that you want to lock. + * Values can be 0,1, or 2. + * + * The function returns a 0 upon success or a -1 if there is no RAR + * facility on this system. + */ +#define rar_lock(a) (-1) + +#else /* using real RAR_REGISTER */ + +#include "../rar_register/rar_register.h" + +#endif /* CONFIG_RAR_REGISTER */ + +#endif /* SEP DRIVER CONFIG */ diff --git a/drivers/staging/sep/sep_driver_hw_defs.h b/drivers/staging/sep/sep_driver_hw_defs.h new file mode 100644 index 0000000..29addd7 --- /dev/null +++ b/drivers/staging/sep/sep_driver_hw_defs.h @@ -0,0 +1,234 @@ +/* + * + * sep_driver_hw_defs.h - Security Processor Driver hardware definitions + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2010.09.20 Upgrade to Medfield + * + */ + +#ifndef SEP_DRIVER_HW_DEFS__H +#define SEP_DRIVER_HW_DEFS__H + +/* PCI ID's */ +#define MRST_PCI_DEVICE_ID 0x080c +#define MFLD_PCI_DEVICE_ID 0x0826 + +/*----------------------- */ +/* HW Registers Defines. */ +/* */ +/*---------------------- -*/ + + +/* cf registers */ +#define HW_R0B_ADDR_0_REG_ADDR 0x0000UL +#define HW_R0B_ADDR_1_REG_ADDR 0x0004UL +#define HW_R0B_ADDR_2_REG_ADDR 0x0008UL +#define HW_R0B_ADDR_3_REG_ADDR 0x000cUL +#define HW_R0B_ADDR_4_REG_ADDR 0x0010UL +#define HW_R0B_ADDR_5_REG_ADDR 0x0014UL +#define HW_R0B_ADDR_6_REG_ADDR 0x0018UL +#define HW_R0B_ADDR_7_REG_ADDR 0x001cUL +#define HW_R0B_ADDR_8_REG_ADDR 0x0020UL +#define HW_R2B_ADDR_0_REG_ADDR 0x0080UL +#define HW_R2B_ADDR_1_REG_ADDR 0x0084UL +#define HW_R2B_ADDR_2_REG_ADDR 0x0088UL +#define HW_R2B_ADDR_3_REG_ADDR 0x008cUL +#define HW_R2B_ADDR_4_REG_ADDR 0x0090UL +#define HW_R2B_ADDR_5_REG_ADDR 0x0094UL +#define HW_R2B_ADDR_6_REG_ADDR 0x0098UL +#define HW_R2B_ADDR_7_REG_ADDR 0x009cUL +#define HW_R2B_ADDR_8_REG_ADDR 0x00a0UL +#define HW_R3B_REG_ADDR 0x00C0UL +#define HW_R4B_REG_ADDR 0x0100UL +#define HW_CSA_ADDR_0_REG_ADDR 0x0140UL +#define HW_CSA_ADDR_1_REG_ADDR 0x0144UL +#define HW_CSA_ADDR_2_REG_ADDR 0x0148UL +#define HW_CSA_ADDR_3_REG_ADDR 0x014cUL +#define HW_CSA_ADDR_4_REG_ADDR 0x0150UL +#define HW_CSA_ADDR_5_REG_ADDR 0x0154UL +#define HW_CSA_ADDR_6_REG_ADDR 0x0158UL +#define HW_CSA_ADDR_7_REG_ADDR 0x015cUL +#define HW_CSA_ADDR_8_REG_ADDR 0x0160UL +#define HW_CSA_REG_ADDR 0x0140UL +#define HW_SINB_REG_ADDR 0x0180UL +#define HW_SOUTB_REG_ADDR 0x0184UL +#define HW_PKI_CONTROL_REG_ADDR 0x01C0UL +#define HW_PKI_STATUS_REG_ADDR 0x01C4UL +#define HW_PKI_BUSY_REG_ADDR 0x01C8UL +#define HW_PKI_A_1025_REG_ADDR 0x01CCUL +#define HW_PKI_SDMA_CTL_REG_ADDR 0x01D0UL +#define HW_PKI_SDMA_OFFSET_REG_ADDR 0x01D4UL +#define HW_PKI_SDMA_POINTERS_REG_ADDR 0x01D8UL +#define HW_PKI_SDMA_DLENG_REG_ADDR 0x01DCUL +#define HW_PKI_SDMA_EXP_POINTERS_REG_ADDR 0x01E0UL +#define HW_PKI_SDMA_RES_POINTERS_REG_ADDR 0x01E4UL +#define HW_PKI_CLR_REG_ADDR 0x01E8UL +#define HW_PKI_SDMA_BUSY_REG_ADDR 0x01E8UL +#define HW_PKI_SDMA_FIRST_EXP_N_REG_ADDR 0x01ECUL +#define HW_PKI_SDMA_MUL_BY1_REG_ADDR 0x01F0UL +#define HW_PKI_SDMA_RMUL_SEL_REG_ADDR 0x01F4UL +#define HW_DES_KEY_0_REG_ADDR 0x0208UL +#define HW_DES_KEY_1_REG_ADDR 0x020CUL +#define HW_DES_KEY_2_REG_ADDR 0x0210UL +#define HW_DES_KEY_3_REG_ADDR 0x0214UL +#define HW_DES_KEY_4_REG_ADDR 0x0218UL +#define HW_DES_KEY_5_REG_ADDR 0x021CUL +#define HW_DES_CONTROL_0_REG_ADDR 0x0220UL +#define HW_DES_CONTROL_1_REG_ADDR 0x0224UL +#define HW_DES_IV_0_REG_ADDR 0x0228UL +#define HW_DES_IV_1_REG_ADDR 0x022CUL +#define HW_AES_KEY_0_ADDR_0_REG_ADDR 0x0400UL +#define HW_AES_KEY_0_ADDR_1_REG_ADDR 0x0404UL +#define HW_AES_KEY_0_ADDR_2_REG_ADDR 0x0408UL +#define HW_AES_KEY_0_ADDR_3_REG_ADDR 0x040cUL +#define HW_AES_KEY_0_ADDR_4_REG_ADDR 0x0410UL +#define HW_AES_KEY_0_ADDR_5_REG_ADDR 0x0414UL +#define HW_AES_KEY_0_ADDR_6_REG_ADDR 0x0418UL +#define HW_AES_KEY_0_ADDR_7_REG_ADDR 0x041cUL +#define HW_AES_KEY_0_REG_ADDR 0x0400UL +#define HW_AES_IV_0_ADDR_0_REG_ADDR 0x0440UL +#define HW_AES_IV_0_ADDR_1_REG_ADDR 0x0444UL +#define HW_AES_IV_0_ADDR_2_REG_ADDR 0x0448UL +#define HW_AES_IV_0_ADDR_3_REG_ADDR 0x044cUL +#define HW_AES_IV_0_REG_ADDR 0x0440UL +#define HW_AES_CTR1_ADDR_0_REG_ADDR 0x0460UL +#define HW_AES_CTR1_ADDR_1_REG_ADDR 0x0464UL +#define HW_AES_CTR1_ADDR_2_REG_ADDR 0x0468UL +#define HW_AES_CTR1_ADDR_3_REG_ADDR 0x046cUL +#define HW_AES_CTR1_REG_ADDR 0x0460UL +#define HW_AES_SK_REG_ADDR 0x0478UL +#define HW_AES_MAC_OK_REG_ADDR 0x0480UL +#define HW_AES_PREV_IV_0_ADDR_0_REG_ADDR 0x0490UL +#define HW_AES_PREV_IV_0_ADDR_1_REG_ADDR 0x0494UL +#define HW_AES_PREV_IV_0_ADDR_2_REG_ADDR 0x0498UL +#define HW_AES_PREV_IV_0_ADDR_3_REG_ADDR 0x049cUL +#define HW_AES_PREV_IV_0_REG_ADDR 0x0490UL +#define HW_AES_CONTROL_REG_ADDR 0x04C0UL +#define HW_HASH_H0_REG_ADDR 0x0640UL +#define HW_HASH_H1_REG_ADDR 0x0644UL +#define HW_HASH_H2_REG_ADDR 0x0648UL +#define HW_HASH_H3_REG_ADDR 0x064CUL +#define HW_HASH_H4_REG_ADDR 0x0650UL +#define HW_HASH_H5_REG_ADDR 0x0654UL +#define HW_HASH_H6_REG_ADDR 0x0658UL +#define HW_HASH_H7_REG_ADDR 0x065CUL +#define HW_HASH_H8_REG_ADDR 0x0660UL +#define HW_HASH_H9_REG_ADDR 0x0664UL +#define HW_HASH_H10_REG_ADDR 0x0668UL +#define HW_HASH_H11_REG_ADDR 0x066CUL +#define HW_HASH_H12_REG_ADDR 0x0670UL +#define HW_HASH_H13_REG_ADDR 0x0674UL +#define HW_HASH_H14_REG_ADDR 0x0678UL +#define HW_HASH_H15_REG_ADDR 0x067CUL +#define HW_HASH_CONTROL_REG_ADDR 0x07C0UL +#define HW_HASH_PAD_EN_REG_ADDR 0x07C4UL +#define HW_HASH_PAD_CFG_REG_ADDR 0x07C8UL +#define HW_HASH_CUR_LEN_0_REG_ADDR 0x07CCUL +#define HW_HASH_CUR_LEN_1_REG_ADDR 0x07D0UL +#define HW_HASH_CUR_LEN_2_REG_ADDR 0x07D4UL +#define HW_HASH_CUR_LEN_3_REG_ADDR 0x07D8UL +#define HW_HASH_PARAM_REG_ADDR 0x07DCUL +#define HW_HASH_INT_BUSY_REG_ADDR 0x07E0UL +#define HW_HASH_SW_RESET_REG_ADDR 0x07E4UL +#define HW_HASH_ENDIANESS_REG_ADDR 0x07E8UL +#define HW_HASH_DATA_REG_ADDR 0x07ECUL +#define HW_DRNG_CONTROL_REG_ADDR 0x0800UL +#define HW_DRNG_VALID_REG_ADDR 0x0804UL +#define HW_DRNG_DATA_REG_ADDR 0x0808UL +#define HW_RND_SRC_EN_REG_ADDR 0x080CUL +#define HW_AES_CLK_ENABLE_REG_ADDR 0x0810UL +#define HW_DES_CLK_ENABLE_REG_ADDR 0x0814UL +#define HW_HASH_CLK_ENABLE_REG_ADDR 0x0818UL +#define HW_PKI_CLK_ENABLE_REG_ADDR 0x081CUL +#define HW_CLK_STATUS_REG_ADDR 0x0824UL +#define HW_CLK_ENABLE_REG_ADDR 0x0828UL +#define HW_DRNG_SAMPLE_REG_ADDR 0x0850UL +#define HW_RND_SRC_CTL_REG_ADDR 0x0858UL +#define HW_CRYPTO_CTL_REG_ADDR 0x0900UL +#define HW_CRYPTO_STATUS_REG_ADDR 0x090CUL +#define HW_CRYPTO_BUSY_REG_ADDR 0x0910UL +#define HW_AES_BUSY_REG_ADDR 0x0914UL +#define HW_DES_BUSY_REG_ADDR 0x0918UL +#define HW_HASH_BUSY_REG_ADDR 0x091CUL +#define HW_CONTENT_REG_ADDR 0x0924UL +#define HW_VERSION_REG_ADDR 0x0928UL +#define HW_CONTEXT_ID_REG_ADDR 0x0930UL +#define HW_DIN_BUFFER_REG_ADDR 0x0C00UL +#define HW_DIN_MEM_DMA_BUSY_REG_ADDR 0x0c20UL +#define HW_SRC_LLI_MEM_ADDR_REG_ADDR 0x0c24UL +#define HW_SRC_LLI_WORD0_REG_ADDR 0x0C28UL +#define HW_SRC_LLI_WORD1_REG_ADDR 0x0C2CUL +#define HW_SRAM_SRC_ADDR_REG_ADDR 0x0c30UL +#define HW_DIN_SRAM_BYTES_LEN_REG_ADDR 0x0c34UL +#define HW_DIN_SRAM_DMA_BUSY_REG_ADDR 0x0C38UL +#define HW_WRITE_ALIGN_REG_ADDR 0x0C3CUL +#define HW_OLD_DATA_REG_ADDR 0x0C48UL +#define HW_WRITE_ALIGN_LAST_REG_ADDR 0x0C4CUL +#define HW_DOUT_BUFFER_REG_ADDR 0x0C00UL +#define HW_DST_LLI_WORD0_REG_ADDR 0x0D28UL +#define HW_DST_LLI_WORD1_REG_ADDR 0x0D2CUL +#define HW_DST_LLI_MEM_ADDR_REG_ADDR 0x0D24UL +#define HW_DOUT_MEM_DMA_BUSY_REG_ADDR 0x0D20UL +#define HW_SRAM_DEST_ADDR_REG_ADDR 0x0D30UL +#define HW_DOUT_SRAM_BYTES_LEN_REG_ADDR 0x0D34UL +#define HW_DOUT_SRAM_DMA_BUSY_REG_ADDR 0x0D38UL +#define HW_READ_ALIGN_REG_ADDR 0x0D3CUL +#define HW_READ_LAST_DATA_REG_ADDR 0x0D44UL +#define HW_RC4_THRU_CPU_REG_ADDR 0x0D4CUL +#define HW_AHB_SINGLE_REG_ADDR 0x0E00UL +#define HW_SRAM_DATA_REG_ADDR 0x0F00UL +#define HW_SRAM_ADDR_REG_ADDR 0x0F04UL +#define HW_SRAM_DATA_READY_REG_ADDR 0x0F08UL +#define HW_HOST_IRR_REG_ADDR 0x0A00UL +#define HW_HOST_IMR_REG_ADDR 0x0A04UL +#define HW_HOST_ICR_REG_ADDR 0x0A08UL +#define HW_HOST_SEP_SRAM_THRESHOLD_REG_ADDR 0x0A10UL +#define HW_HOST_SEP_BUSY_REG_ADDR 0x0A14UL +#define HW_HOST_SEP_LCS_REG_ADDR 0x0A18UL +#define HW_HOST_CC_SW_RST_REG_ADDR 0x0A40UL +#define HW_HOST_SEP_SW_RST_REG_ADDR 0x0A44UL +#define HW_HOST_FLOW_DMA_SW_INT0_REG_ADDR 0x0A80UL +#define HW_HOST_FLOW_DMA_SW_INT1_REG_ADDR 0x0A84UL +#define HW_HOST_FLOW_DMA_SW_INT2_REG_ADDR 0x0A88UL +#define HW_HOST_FLOW_DMA_SW_INT3_REG_ADDR 0x0A8cUL +#define HW_HOST_FLOW_DMA_SW_INT4_REG_ADDR 0x0A90UL +#define HW_HOST_FLOW_DMA_SW_INT5_REG_ADDR 0x0A94UL +#define HW_HOST_FLOW_DMA_SW_INT6_REG_ADDR 0x0A98UL +#define HW_HOST_FLOW_DMA_SW_INT7_REG_ADDR 0x0A9cUL +#define HW_HOST_SEP_HOST_GPR0_REG_ADDR 0x0B00UL +#define HW_HOST_SEP_HOST_GPR1_REG_ADDR 0x0B04UL +#define HW_HOST_SEP_HOST_GPR2_REG_ADDR 0x0B08UL +#define HW_HOST_SEP_HOST_GPR3_REG_ADDR 0x0B0CUL +#define HW_HOST_HOST_SEP_GPR0_REG_ADDR 0x0B80UL +#define HW_HOST_HOST_SEP_GPR1_REG_ADDR 0x0B84UL +#define HW_HOST_HOST_SEP_GPR2_REG_ADDR 0x0B88UL +#define HW_HOST_HOST_SEP_GPR3_REG_ADDR 0x0B8CUL +#define HW_HOST_HOST_ENDIAN_REG_ADDR 0x0B90UL +#define HW_HOST_HOST_COMM_CLK_EN_REG_ADDR 0x0B94UL +#define HW_CLR_SRAM_BUSY_REG_REG_ADDR 0x0F0CUL +#define HW_CC_SRAM_BASE_ADDRESS 0x5800UL + +#endif /* ifndef HW_DEFS */ |