summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/wireless/ti/wl18xx/conf.h37
-rw-r--r--drivers/net/wireless/ti/wl18xx/main.c52
-rw-r--r--drivers/net/wireless/ti/wl18xx/reg.h57
3 files changed, 36 insertions, 110 deletions
diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h
index 130546a..fac0b7e 100644
--- a/drivers/net/wireless/ti/wl18xx/conf.h
+++ b/drivers/net/wireless/ti/wl18xx/conf.h
@@ -23,41 +23,70 @@
#define __WL18XX_CONF_H__
#define WL18XX_CONF_MAGIC 0x10e100ca
-#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0001)
+#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0002)
#define WL18XX_CONF_MASK 0x0000ffff
#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \
sizeof(struct wl18xx_priv_conf))
-struct wl18xx_conf_phy {
+#define NUM_OF_CHANNELS_11_ABG 150
+#define NUM_OF_CHANNELS_11_P 7
+#define WL18XX_NUM_OF_SUB_BANDS 9
+#define SRF_TABLE_LEN 16
+#define PIN_MUXING_SIZE 2
+
+struct wl18xx_mac_and_phy_params {
u8 phy_standalone;
u8 rdl;
u8 enable_clpc;
u8 enable_tx_low_pwr_on_siso_rdl;
u8 auto_detect;
u8 dedicated_fem;
+
u8 low_band_component;
+
+ /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
u8 low_band_component_type;
+
u8 high_band_component;
+
+ /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
u8 high_band_component_type;
+ u8 number_of_assembled_ant2_4;
+ u8 number_of_assembled_ant5;
+ u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
+ u8 external_pa_dc2dc;
u8 tcxo_ldo_voltage;
u8 xtal_itrim_val;
u8 srf_state;
+ u8 srf1[SRF_TABLE_LEN];
+ u8 srf2[SRF_TABLE_LEN];
+ u8 srf3[SRF_TABLE_LEN];
u8 io_configuration;
u8 sdio_configuration;
u8 settings;
u8 rx_profile;
+ u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
+ u8 pwr_limit_reference_11_abg;
+ u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
+ u8 pwr_limit_reference_11p;
+ u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
+ u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
u8 primary_clock_setting_time;
u8 clock_valid_on_wake_up;
u8 secondary_clock_setting_time;
- u8 pwr_limit_reference_11_abg;
+ u8 board_type;
+ /* enable point saturation */
u8 psat;
+ /* low/medium/high Tx power in dBm */
s8 low_power_val;
s8 med_power_val;
s8 high_power_val;
+ u8 padding[1];
} __packed;
struct wl18xx_priv_conf {
- struct wl18xx_conf_phy phy;
+ /* this structure is copied wholesale to FW */
+ struct wl18xx_mac_and_phy_params phy;
} __packed;
#endif /* __WL18XX_CONF_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index c26015b..78b2e54 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -716,63 +716,17 @@ static void wl18xx_pre_upload(struct wl1271 *wl)
static void wl18xx_set_mac_and_phy(struct wl1271 *wl)
{
struct wl18xx_priv *priv = wl->priv;
- struct wl18xx_conf_phy *phy = &priv->conf.phy;
- struct wl18xx_mac_and_phy_params params;
size_t len;
- memset(&params, 0, sizeof(params));
-
- params.phy_standalone = phy->phy_standalone;
- params.rdl = phy->rdl;
- params.enable_clpc = phy->enable_clpc;
- params.enable_tx_low_pwr_on_siso_rdl =
- phy->enable_tx_low_pwr_on_siso_rdl;
- params.auto_detect = phy->auto_detect;
- params.dedicated_fem = phy->dedicated_fem;
- params.low_band_component = phy->low_band_component;
- params.low_band_component_type =
- phy->low_band_component_type;
- params.high_band_component = phy->high_band_component;
- params.high_band_component_type =
- phy->high_band_component_type;
- params.number_of_assembled_ant2_4 =
- n_antennas_2_param;
- params.number_of_assembled_ant5 =
- n_antennas_5_param;
- params.external_pa_dc2dc = dc2dc_param;
- params.tcxo_ldo_voltage = phy->tcxo_ldo_voltage;
- params.xtal_itrim_val = phy->xtal_itrim_val;
- params.srf_state = phy->srf_state;
- params.io_configuration = phy->io_configuration;
- params.sdio_configuration = phy->sdio_configuration;
- params.settings = phy->settings;
- params.rx_profile = phy->rx_profile;
- params.primary_clock_setting_time =
- phy->primary_clock_setting_time;
- params.clock_valid_on_wake_up =
- phy->clock_valid_on_wake_up;
- params.secondary_clock_setting_time =
- phy->secondary_clock_setting_time;
- params.pwr_limit_reference_11_abg =
- phy->pwr_limit_reference_11_abg;
-
- params.board_type = priv->board_type;
-
- /* for PG2 only */
- params.psat = phy->psat;
- params.low_power_val = phy->low_power_val;
- params.med_power_val = phy->med_power_val;
- params.high_power_val = phy->high_power_val;
-
/* the parameters struct is smaller for PG1 */
if (wl->chip.id == CHIP_ID_185x_PG10)
len = offsetof(struct wl18xx_mac_and_phy_params, psat) + 1;
else
- len = sizeof(params);
+ len = sizeof(struct wl18xx_mac_and_phy_params);
wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
- wl1271_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)&params,
- len, false);
+ wl1271_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)&priv->conf.phy, len,
+ false);
}
static void wl18xx_enable_interrupts(struct wl1271 *wl)
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
index a824b26..937b71d 100644
--- a/drivers/net/wireless/ti/wl18xx/reg.h
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -164,13 +164,6 @@
*/
#define WL18XX_SCR_PAD8_PLT 0xBABABEBE
-/* TODO: maybe move elsewhere? */
-#define NUM_OF_CHANNELS_11_ABG 150
-#define NUM_OF_CHANNELS_11_P 7
-#define WL18XX_NUM_OF_SUB_BANDS 9
-#define SRF_TABLE_LEN 16
-#define PIN_MUXING_SIZE 2
-
enum {
COMPONENT_NO_SWITCH = 0x0,
COMPONENT_2_WAY_SWITCH = 0x1,
@@ -195,54 +188,4 @@ enum {
NUM_BOARD_TYPES,
};
-struct wl18xx_mac_and_phy_params {
- u8 phy_standalone;
- u8 rdl;
- u8 enable_clpc;
- u8 enable_tx_low_pwr_on_siso_rdl;
- u8 auto_detect;
- u8 dedicated_fem;
-
- u8 low_band_component;
-
- /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
- u8 low_band_component_type;
-
- u8 high_band_component;
-
- /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
- u8 high_band_component_type;
- u8 number_of_assembled_ant2_4;
- u8 number_of_assembled_ant5;
- u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
- u8 external_pa_dc2dc;
- u8 tcxo_ldo_voltage;
- u8 xtal_itrim_val;
- u8 srf_state;
- u8 srf1[SRF_TABLE_LEN];
- u8 srf2[SRF_TABLE_LEN];
- u8 srf3[SRF_TABLE_LEN];
- u8 io_configuration;
- u8 sdio_configuration;
- u8 settings;
- u8 rx_profile;
- u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
- u8 pwr_limit_reference_11_abg;
- u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
- u8 pwr_limit_reference_11p;
- u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
- u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
- u8 primary_clock_setting_time;
- u8 clock_valid_on_wake_up;
- u8 secondary_clock_setting_time;
- u8 board_type;
- /* enable point saturation */
- u8 psat;
- /* low/medium/high Tx power in dBm */
- s8 low_power_val;
- s8 med_power_val;
- s8 high_power_val;
- u8 padding[1];
-} __packed;
-
#endif /* __REG_H__ */
generated by cgit v0.10.2 at 2024-11-05 11:52:52 (GMT)