diff options
Diffstat (limited to 'drivers')
204 files changed, 7276 insertions, 2960 deletions
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 536562c..81dbeb8 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -34,6 +34,7 @@ acpi-$(CONFIG_ACPI_SLEEP) += proc.o acpi-y += bus.o glue.o acpi-y += scan.o acpi-y += resource.o +acpi-y += acpi_processor.o acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o @@ -43,6 +44,7 @@ acpi-y += acpi_platform.o acpi-y += power.o acpi-y += event.o acpi-y += sysfs.o +acpi-$(CONFIG_X86) += acpi_cmos_rtc.o acpi-$(CONFIG_DEBUG_FS) += debugfs.o acpi-$(CONFIG_ACPI_NUMA) += numa.o acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o diff --git a/drivers/acpi/acpi_cmos_rtc.c b/drivers/acpi/acpi_cmos_rtc.c new file mode 100644 index 0000000..84190ed --- /dev/null +++ b/drivers/acpi/acpi_cmos_rtc.c @@ -0,0 +1,92 @@ +/* + * ACPI support for CMOS RTC Address Space access + * + * Copyright (C) 2013, Intel Corporation + * Authors: Lan Tianyu <tianyu.lan@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm-generic/rtc.h> + +#include "internal.h" + +#define PREFIX "ACPI: " + +ACPI_MODULE_NAME("cmos rtc"); + +static const struct acpi_device_id acpi_cmos_rtc_ids[] = { + { "PNP0B00" }, + { "PNP0B01" }, + { "PNP0B02" }, + {} +}; + +static acpi_status +acpi_cmos_rtc_space_handler(u32 function, acpi_physical_address address, + u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + int i; + u8 *value = (u8 *)&value64; + + if (address > 0xff || !value64) + return AE_BAD_PARAMETER; + + if (function != ACPI_WRITE && function != ACPI_READ) + return AE_BAD_PARAMETER; + + spin_lock_irq(&rtc_lock); + + for (i = 0; i < DIV_ROUND_UP(bits, 8); ++i, ++address, ++value) + if (function == ACPI_READ) + *value = CMOS_READ(address); + else + CMOS_WRITE(*value, address); + + spin_unlock_irq(&rtc_lock); + + return AE_OK; +} + +static int acpi_install_cmos_rtc_space_handler(struct acpi_device *adev, + const struct acpi_device_id *id) +{ + acpi_status status; + + status = acpi_install_address_space_handler(adev->handle, + ACPI_ADR_SPACE_CMOS, + &acpi_cmos_rtc_space_handler, + NULL, NULL); + if (ACPI_FAILURE(status)) { + pr_err(PREFIX "Error installing CMOS-RTC region handler\n"); + return -ENODEV; + } + + return 0; +} + +static void acpi_remove_cmos_rtc_space_handler(struct acpi_device *adev) +{ + if (ACPI_FAILURE(acpi_remove_address_space_handler(adev->handle, + ACPI_ADR_SPACE_CMOS, &acpi_cmos_rtc_space_handler))) + pr_err(PREFIX "Error removing CMOS-RTC region handler\n"); +} + +static struct acpi_scan_handler cmos_rtc_handler = { + .ids = acpi_cmos_rtc_ids, + .attach = acpi_install_cmos_rtc_space_handler, + .detach = acpi_remove_cmos_rtc_space_handler, +}; + +void __init acpi_cmos_rtc_init(void) +{ + acpi_scan_add_handler(&cmos_rtc_handler); +} diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index cab13f2..6a38218 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -32,12 +32,26 @@ ACPI_MODULE_NAME("acpi_lpss"); #define LPSS_GENERAL_LTR_MODE_SW BIT(2) #define LPSS_SW_LTR 0x10 #define LPSS_AUTO_LTR 0x14 +#define LPSS_TX_INT 0x20 +#define LPSS_TX_INT_MASK BIT(1) + +struct lpss_shared_clock { + const char *name; + unsigned long rate; + struct clk *clk; +}; + +struct lpss_private_data; struct lpss_device_desc { bool clk_required; const char *clkdev_name; bool ltr_required; unsigned int prv_offset; + size_t prv_size_override; + bool clk_gate; + struct lpss_shared_clock *shared_clock; + void (*setup)(struct lpss_private_data *pdata); }; static struct lpss_device_desc lpss_dma_desc = { @@ -52,17 +66,76 @@ struct lpss_private_data { const struct lpss_device_desc *dev_desc; }; +static void lpss_uart_setup(struct lpss_private_data *pdata) +{ + unsigned int tx_int_offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; + u32 reg; + + reg = readl(pdata->mmio_base + tx_int_offset); + writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + tx_int_offset); +} + static struct lpss_device_desc lpt_dev_desc = { .clk_required = true, .prv_offset = 0x800, .ltr_required = true, + .clk_gate = true, +}; + +static struct lpss_device_desc lpt_uart_dev_desc = { + .clk_required = true, + .prv_offset = 0x800, + .ltr_required = true, + .clk_gate = true, + .setup = lpss_uart_setup, }; static struct lpss_device_desc lpt_sdio_dev_desc = { .prv_offset = 0x1000, + .prv_size_override = 0x1018, .ltr_required = true, }; +static struct lpss_shared_clock uart_clock = { + .name = "uart_clk", + .rate = 44236800, +}; + +static struct lpss_device_desc byt_uart_dev_desc = { + .clk_required = true, + .prv_offset = 0x800, + .clk_gate = true, + .shared_clock = &uart_clock, + .setup = lpss_uart_setup, +}; + +static struct lpss_shared_clock spi_clock = { + .name = "spi_clk", + .rate = 50000000, +}; + +static struct lpss_device_desc byt_spi_dev_desc = { + .clk_required = true, + .prv_offset = 0x400, + .clk_gate = true, + .shared_clock = &spi_clock, +}; + +static struct lpss_device_desc byt_sdio_dev_desc = { + .clk_required = true, +}; + +static struct lpss_shared_clock i2c_clock = { + .name = "i2c_clk", + .rate = 100000000, +}; + +static struct lpss_device_desc byt_i2c_dev_desc = { + .clk_required = true, + .prv_offset = 0x800, + .shared_clock = &i2c_clock, +}; + static const struct acpi_device_id acpi_lpss_device_ids[] = { /* Generic LPSS devices */ { "INTL9C60", (unsigned long)&lpss_dma_desc }, @@ -72,11 +145,18 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = { { "INT33C1", (unsigned long)&lpt_dev_desc }, { "INT33C2", (unsigned long)&lpt_dev_desc }, { "INT33C3", (unsigned long)&lpt_dev_desc }, - { "INT33C4", (unsigned long)&lpt_dev_desc }, - { "INT33C5", (unsigned long)&lpt_dev_desc }, + { "INT33C4", (unsigned long)&lpt_uart_dev_desc }, + { "INT33C5", (unsigned long)&lpt_uart_dev_desc }, { "INT33C6", (unsigned long)&lpt_sdio_dev_desc }, { "INT33C7", }, + /* BayTrail LPSS devices */ + { "80860F0A", (unsigned long)&byt_uart_dev_desc }, + { "80860F0E", (unsigned long)&byt_spi_dev_desc }, + { "80860F14", (unsigned long)&byt_sdio_dev_desc }, + { "80860F41", (unsigned long)&byt_i2c_dev_desc }, + { "INT33B2", }, + { } }; @@ -98,7 +178,10 @@ static int register_device_clock(struct acpi_device *adev, struct lpss_private_data *pdata) { const struct lpss_device_desc *dev_desc = pdata->dev_desc; + struct lpss_shared_clock *shared_clock = dev_desc->shared_clock; + struct clk *clk = ERR_PTR(-ENODEV); struct lpss_clk_data *clk_data; + const char *parent; if (!lpss_clk_dev) lpt_register_clock_device(); @@ -117,14 +200,30 @@ static int register_device_clock(struct acpi_device *adev, || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) return -ENODATA; - pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev), - clk_data->name, 0, - pdata->mmio_base + dev_desc->prv_offset, - 0, 0, NULL); - if (IS_ERR(pdata->clk)) - return PTR_ERR(pdata->clk); + parent = clk_data->name; + + if (shared_clock) { + clk = shared_clock->clk; + if (!clk) { + clk = clk_register_fixed_rate(NULL, shared_clock->name, + "lpss_clk", 0, + shared_clock->rate); + shared_clock->clk = clk; + } + parent = shared_clock->name; + } + + if (dev_desc->clk_gate) { + clk = clk_register_gate(NULL, dev_name(&adev->dev), parent, 0, + pdata->mmio_base + dev_desc->prv_offset, + 0, 0, NULL); + pdata->clk = clk; + } - clk_register_clkdev(pdata->clk, NULL, dev_name(&adev->dev)); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_register_clkdev(clk, NULL, dev_name(&adev->dev)); return 0; } @@ -152,7 +251,10 @@ static int acpi_lpss_create_device(struct acpi_device *adev, list_for_each_entry(rentry, &resource_list, node) if (resource_type(&rentry->res) == IORESOURCE_MEM) { - pdata->mmio_size = resource_size(&rentry->res); + if (dev_desc->prv_size_override) + pdata->mmio_size = dev_desc->prv_size_override; + else + pdata->mmio_size = resource_size(&rentry->res); pdata->mmio_base = ioremap(rentry->res.start, pdata->mmio_size); pdata->dev_desc = dev_desc; @@ -182,6 +284,9 @@ static int acpi_lpss_create_device(struct acpi_device *adev, goto err_out; } + if (dev_desc->setup) + dev_desc->setup(pdata); + adev->driver_data = pdata; ret = acpi_create_platform_device(adev, id); if (ret > 0) diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 5e6301e..c711d11 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -28,6 +28,7 @@ */ #include <linux/acpi.h> +#include <linux/memory.h> #include <linux/memory_hotplug.h> #include "internal.h" @@ -166,13 +167,50 @@ static int acpi_memory_check_device(struct acpi_memory_device *mem_device) return 0; } +static unsigned long acpi_meminfo_start_pfn(struct acpi_memory_info *info) +{ + return PFN_DOWN(info->start_addr); +} + +static unsigned long acpi_meminfo_end_pfn(struct acpi_memory_info *info) +{ + return PFN_UP(info->start_addr + info->length-1); +} + +static int acpi_bind_memblk(struct memory_block *mem, void *arg) +{ + return acpi_bind_one(&mem->dev, (acpi_handle)arg); +} + +static int acpi_bind_memory_blocks(struct acpi_memory_info *info, + acpi_handle handle) +{ + return walk_memory_range(acpi_meminfo_start_pfn(info), + acpi_meminfo_end_pfn(info), (void *)handle, + acpi_bind_memblk); +} + +static int acpi_unbind_memblk(struct memory_block *mem, void *arg) +{ + acpi_unbind_one(&mem->dev); + return 0; +} + +static void acpi_unbind_memory_blocks(struct acpi_memory_info *info, + acpi_handle handle) +{ + walk_memory_range(acpi_meminfo_start_pfn(info), + acpi_meminfo_end_pfn(info), NULL, acpi_unbind_memblk); +} + static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) { + acpi_handle handle = mem_device->device->handle; int result, num_enabled = 0; struct acpi_memory_info *info; int node; - node = acpi_get_node(mem_device->device->handle); + node = acpi_get_node(handle); /* * Tell the VM there is more memory here... * Note: Assume that this function returns zero on success @@ -203,6 +241,12 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) if (result && result != -EEXIST) continue; + result = acpi_bind_memory_blocks(info, handle); + if (result) { + acpi_unbind_memory_blocks(info, handle); + return -ENODEV; + } + info->enabled = 1; /* @@ -227,12 +271,11 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) return 0; } -static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device) +static void acpi_memory_remove_memory(struct acpi_memory_device *mem_device) { - int result = 0, nid; + acpi_handle handle = mem_device->device->handle; struct acpi_memory_info *info, *n; - - nid = acpi_get_node(mem_device->device->handle); + int nid = acpi_get_node(handle); list_for_each_entry_safe(info, n, &mem_device->res_list, list) { if (!info->enabled) @@ -240,15 +283,12 @@ static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device) if (nid < 0) nid = memory_add_physaddr_to_nid(info->start_addr); - result = remove_memory(nid, info->start_addr, info->length); - if (result) - return result; + acpi_unbind_memory_blocks(info, handle); + remove_memory(nid, info->start_addr, info->length); list_del(&info->list); kfree(info); } - - return result; } static void acpi_memory_device_free(struct acpi_memory_device *mem_device) @@ -300,7 +340,7 @@ static int acpi_memory_device_add(struct acpi_device *device, if (result) { dev_err(&device->dev, "acpi_memory_enable_device() error\n"); acpi_memory_device_free(mem_device); - return -ENODEV; + return result; } dev_dbg(&device->dev, "Memory device configured by ACPI\n"); diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c new file mode 100644 index 0000000..e9b01e3 --- /dev/null +++ b/drivers/acpi/acpi_processor.c @@ -0,0 +1,494 @@ +/* + * acpi_processor.c - ACPI processor enumeration support + * + * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> + * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> + * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> + * Copyright (C) 2013, Intel Corporation + * Rafael J. Wysocki <rafael.j.wysocki@intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> + +#include <acpi/processor.h> + +#include <asm/cpu.h> + +#include "internal.h" + +#define _COMPONENT ACPI_PROCESSOR_COMPONENT + +ACPI_MODULE_NAME("processor"); + +DEFINE_PER_CPU(struct acpi_processor *, processors); +EXPORT_PER_CPU_SYMBOL(processors); + +/* -------------------------------------------------------------------------- + Errata Handling + -------------------------------------------------------------------------- */ + +struct acpi_processor_errata errata __read_mostly; +EXPORT_SYMBOL_GPL(errata); + +static int acpi_processor_errata_piix4(struct pci_dev *dev) +{ + u8 value1 = 0; + u8 value2 = 0; + + + if (!dev) + return -EINVAL; + + /* + * Note that 'dev' references the PIIX4 ACPI Controller. + */ + + switch (dev->revision) { + case 0: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); + break; + case 1: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n")); + break; + case 2: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n")); + break; + case 3: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n")); + break; + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n")); + break; + } + + switch (dev->revision) { + + case 0: /* PIIX4 A-step */ + case 1: /* PIIX4 B-step */ + /* + * See specification changes #13 ("Manual Throttle Duty Cycle") + * and #14 ("Enabling and Disabling Manual Throttle"), plus + * erratum #5 ("STPCLK# Deassertion Time") from the January + * 2002 PIIX4 specification update. Applies to only older + * PIIX4 models. + */ + errata.piix4.throttle = 1; + + case 2: /* PIIX4E */ + case 3: /* PIIX4M */ + /* + * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA + * Livelock") from the January 2002 PIIX4 specification update. + * Applies to all PIIX4 models. + */ + + /* + * BM-IDE + * ------ + * Find the PIIX4 IDE Controller and get the Bus Master IDE + * Status register address. We'll use this later to read + * each IDE controller's DMA status to make sure we catch all + * DMA activity. + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (dev) { + errata.piix4.bmisx = pci_resource_start(dev, 4); + pci_dev_put(dev); + } + + /* + * Type-F DMA + * ---------- + * Find the PIIX4 ISA Controller and read the Motherboard + * DMA controller's status to see if Type-F (Fast) DMA mode + * is enabled (bit 7) on either channel. Note that we'll + * disable C3 support if this is enabled, as some legacy + * devices won't operate well if fast DMA is disabled. + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_0, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (dev) { + pci_read_config_byte(dev, 0x76, &value1); + pci_read_config_byte(dev, 0x77, &value2); + if ((value1 & 0x80) || (value2 & 0x80)) + errata.piix4.fdma = 1; + pci_dev_put(dev); + } + + break; + } + + if (errata.piix4.bmisx) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Bus master activity detection (BM-IDE) erratum enabled\n")); + if (errata.piix4.fdma) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Type-F DMA livelock erratum (C3 disabled)\n")); + + return 0; +} + +static int acpi_processor_errata(struct acpi_processor *pr) +{ + int result = 0; + struct pci_dev *dev = NULL; + + + if (!pr) + return -EINVAL; + + /* + * PIIX4 + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, + PCI_ANY_ID, NULL); + if (dev) { + result = acpi_processor_errata_piix4(dev); + pci_dev_put(dev); + } + + return result; +} + +/* -------------------------------------------------------------------------- + Initialization + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI_HOTPLUG_CPU +static int acpi_processor_hotadd_init(struct acpi_processor *pr) +{ + unsigned long long sta; + acpi_status status; + int ret; + + status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); + if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) + return -ENODEV; + + ret = acpi_map_lsapic(pr->handle, &pr->id); + if (ret) + return ret; + + ret = arch_register_cpu(pr->id); + if (ret) { + acpi_unmap_lsapic(pr->id); + return ret; + } + + /* + * CPU got hot-added, but cpu_data is not initialized yet. Set a flag + * to delay cpu_idle/throttling initialization and do it when the CPU + * gets online for the first time. + */ + pr_info("CPU%d has been hot-added\n", pr->id); + pr->flags.need_hotplug_init = 1; + return 0; +} +#else +static inline int acpi_processor_hotadd_init(struct acpi_processor *pr) +{ + return -ENODEV; +} +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +static int acpi_processor_get_info(struct acpi_device *device) +{ + union acpi_object object = { 0 }; + struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; + struct acpi_processor *pr = acpi_driver_data(device); + int cpu_index, device_declaration = 0; + acpi_status status = AE_OK; + static int cpu0_initialized; + + if (num_online_cpus() > 1) + errata.smp = TRUE; + + acpi_processor_errata(pr); + + /* + * Check to see if we have bus mastering arbitration control. This + * is required for proper C3 usage (to maintain cache coherency). + */ + if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) { + pr->flags.bm_control = 1; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Bus mastering arbitration control present\n")); + } else + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "No bus mastering arbitration control\n")); + + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { + /* Declared with "Processor" statement; match ProcessorID */ + status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, + "Failed to evaluate processor object (0x%x)\n", + status); + return -ENODEV; + } + + /* + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ + pr->acpi_id = object.processor.proc_id; + } else { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ + unsigned long long value; + status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, + NULL, &value); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, + "Failed to evaluate processor _UID (0x%x)\n", + status); + return -ENODEV; + } + device_declaration = 1; + pr->acpi_id = value; + } + cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id); + + /* Handle UP system running SMP kernel, with no LAPIC in MADT */ + if (!cpu0_initialized && (cpu_index == -1) && + (num_online_cpus() == 1)) { + cpu_index = 0; + } + + cpu0_initialized = 1; + + pr->id = cpu_index; + + /* + * Extra Processor objects may be enumerated on MP systems with + * less than the max # of CPUs. They should be ignored _iff + * they are physically not present. + */ + if (pr->id == -1) { + int ret = acpi_processor_hotadd_init(pr); + if (ret) + return ret; + } + /* + * On some boxes several processors use the same processor bus id. + * But they are located in different scope. For example: + * \_SB.SCK0.CPU0 + * \_SB.SCK1.CPU0 + * Rename the processor device bus id. And the new bus id will be + * generated as the following format: + * CPU+CPU ID. + */ + sprintf(acpi_device_bid(device), "CPU%X", pr->id); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, + pr->acpi_id)); + + if (!object.processor.pblk_address) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); + else if (object.processor.pblk_length != 6) + dev_err(&device->dev, "Invalid PBLK length [%d]\n", + object.processor.pblk_length); + else { + pr->throttling.address = object.processor.pblk_address; + pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; + pr->throttling.duty_width = acpi_gbl_FADT.duty_width; + + pr->pblk = object.processor.pblk_address; + + /* + * We don't care about error returns - we just try to mark + * these reserved so that nobody else is confused into thinking + * that this region might be unused.. + * + * (In particular, allocating the IO range for Cardbus) + */ + request_region(pr->throttling.address, 6, "ACPI CPU throttle"); + } + + /* + * If ACPI describes a slot number for this CPU, we can use it to + * ensure we get the right value in the "physical id" field + * of /proc/cpuinfo + */ + status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer); + if (ACPI_SUCCESS(status)) + arch_fix_phys_package_id(pr->id, object.integer.value); + + return 0; +} + +/* + * Do not put anything in here which needs the core to be online. + * For example MSR access or setting up things which check for cpuinfo_x86 + * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. + * Such things have to be put in and set up by the processor driver's .probe(). + */ +static DEFINE_PER_CPU(void *, processor_device_array); + +static int __cpuinit acpi_processor_add(struct acpi_device *device, + const struct acpi_device_id *id) +{ + struct acpi_processor *pr; + struct device *dev; + int result = 0; + + pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); + if (!pr) + return -ENOMEM; + + if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { + result = -ENOMEM; + goto err_free_pr; + } + + pr->handle = device->handle; + strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS); + device->driver_data = pr; + + result = acpi_processor_get_info(device); + if (result) /* Processor is not physically present or unavailable */ + return 0; + +#ifdef CONFIG_SMP + if (pr->id >= setup_max_cpus && pr->id != 0) + return 0; +#endif + + BUG_ON(pr->id >= nr_cpu_ids); + + /* + * Buggy BIOS check. + * ACPI id of processors can be reported wrongly by the BIOS. + * Don't trust it blindly + */ + if (per_cpu(processor_device_array, pr->id) != NULL && + per_cpu(processor_device_array, pr->id) != device) { + dev_warn(&device->dev, + "BIOS reported wrong ACPI id %d for the processor\n", + pr->id); + /* Give up, but do not abort the namespace scan. */ + goto err; + } + /* + * processor_device_array is not cleared on errors to allow buggy BIOS + * checks. + */ + per_cpu(processor_device_array, pr->id) = device; + per_cpu(processors, pr->id) = pr; + + dev = get_cpu_device(pr->id); + if (!dev) { + result = -ENODEV; + goto err; + } + + result = acpi_bind_one(dev, pr->handle); + if (result) + goto err; + + pr->dev = dev; + dev->offline = pr->flags.need_hotplug_init; + + /* Trigger the processor driver's .probe() if present. */ + if (device_attach(dev) >= 0) + return 1; + + dev_err(dev, "Processor driver could not be attached\n"); + acpi_unbind_one(dev); + + err: + free_cpumask_var(pr->throttling.shared_cpu_map); + device->driver_data = NULL; + per_cpu(processors, pr->id) = NULL; + err_free_pr: + kfree(pr); + return result; +} + +#ifdef CONFIG_ACPI_HOTPLUG_CPU +/* -------------------------------------------------------------------------- + Removal + -------------------------------------------------------------------------- */ + +static void acpi_processor_remove(struct acpi_device *device) +{ + struct acpi_processor *pr; + + if (!device || !acpi_driver_data(device)) + return; + + pr = acpi_driver_data(device); + if (pr->id >= nr_cpu_ids) + goto out; + + /* + * The only reason why we ever get here is CPU hot-removal. The CPU is + * already offline and the ACPI device removal locking prevents it from + * being put back online at this point. + * + * Unbind the driver from the processor device and detach it from the + * ACPI companion object. + */ + device_release_driver(pr->dev); + acpi_unbind_one(pr->dev); + + /* Clean up. */ + per_cpu(processor_device_array, pr->id) = NULL; + per_cpu(processors, pr->id) = NULL; + try_offline_node(cpu_to_node(pr->id)); + + /* Remove the CPU. */ + get_online_cpus(); + arch_unregister_cpu(pr->id); + acpi_unmap_lsapic(pr->id); + put_online_cpus(); + + out: + free_cpumask_var(pr->throttling.shared_cpu_map); + kfree(pr); +} +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +/* + * The following ACPI IDs are known to be suitable for representing as + * processor devices. + */ +static const struct acpi_device_id processor_device_ids[] = { + + { ACPI_PROCESSOR_OBJECT_HID, }, + { ACPI_PROCESSOR_DEVICE_HID, }, + + { } +}; + +static struct acpi_scan_handler __refdata processor_handler = { + .ids = processor_device_ids, + .attach = acpi_processor_add, +#ifdef CONFIG_ACPI_HOTPLUG_CPU + .detach = acpi_processor_remove, +#endif + .hotplug = { + .enabled = true, + }, +}; + +void __init acpi_processor_init(void) +{ + acpi_scan_add_handler_with_hotplug(&processor_handler, "processor"); +} diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 7ddf29e..4383040 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -83,6 +83,7 @@ acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o acpi-y += \ nsaccess.o \ nsalloc.o \ + nsarguments.o \ nsconvert.o \ nsdump.o \ nseval.o \ @@ -137,6 +138,7 @@ acpi-y += \ tbfadt.o \ tbfind.o \ tbinstal.o \ + tbprint.o \ tbutils.o \ tbxface.o \ tbxfload.o \ @@ -145,11 +147,13 @@ acpi-y += \ acpi-y += \ utaddress.o \ utalloc.o \ + utbuffer.o \ utcopy.o \ utexcep.o \ utdebug.o \ utdecode.o \ utdelete.o \ + uterror.o \ uteval.o \ utglobal.o \ utids.o \ diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 0716092..b8d3811 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -132,6 +132,12 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE); */ u8 ACPI_INIT_GLOBAL(acpi_gbl_disable_auto_repair, FALSE); +/* + * Optionally do not load any SSDTs from the RSDT/XSDT during initialization. + * This can be useful for debugging ACPI problems on some machines. + */ +u8 ACPI_INIT_GLOBAL(acpi_gbl_disable_ssdt_table_load, FALSE); + /* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */ struct acpi_table_fadt acpi_gbl_FADT; diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index d5bfbd3..dfed265 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -362,23 +362,6 @@ union acpi_predefined_info { #pragma pack() -/* Data block used during object validation */ - -struct acpi_predefined_data { - char *pathname; - const union acpi_predefined_info *predefined; - union acpi_operand_object *parent_package; - struct acpi_namespace_node *node; - u32 flags; - u32 return_btype; - u8 node_flags; -}; - -/* Defines for Flags field above */ - -#define ACPI_OBJECT_REPAIRED 1 -#define ACPI_OBJECT_WRAPPED 2 - /* Return object auto-repair info */ typedef acpi_status(*acpi_object_converter) (union acpi_operand_object diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index 53666bd..530a2f8 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -374,10 +374,11 @@ * the plist contains a set of parens to allow variable-length lists. * These macros are used for both the debug and non-debug versions of the code. */ -#define ACPI_ERROR_NAMESPACE(s, e) acpi_ut_namespace_error (AE_INFO, s, e); -#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ut_method_error (AE_INFO, s, n, p, e); -#define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist -#define ACPI_INFO_PREDEFINED(plist) acpi_ut_predefined_info plist +#define ACPI_ERROR_NAMESPACE(s, e) acpi_ut_namespace_error (AE_INFO, s, e); +#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ut_method_error (AE_INFO, s, n, p, e); +#define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist +#define ACPI_INFO_PREDEFINED(plist) acpi_ut_predefined_info plist +#define ACPI_BIOS_ERROR_PREDEFINED(plist) acpi_ut_predefined_bios_error plist #else @@ -387,6 +388,7 @@ #define ACPI_ERROR_METHOD(s, n, p, e) #define ACPI_WARN_PREDEFINED(plist) #define ACPI_INFO_PREDEFINED(plist) +#define ACPI_BIOS_ERROR_PREDEFINED(plist) #endif /* ACPI_NO_ERROR_MESSAGES */ diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index d2e4918..b83dc32 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -223,22 +223,33 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info); void acpi_ns_exec_module_code_list(void); /* - * nspredef - Support for predefined/reserved names + * nsarguments - Argument count/type checking for predefined/reserved names */ -acpi_status -acpi_ns_check_predefined_names(struct acpi_namespace_node *node, - u32 user_param_count, - acpi_status return_status, - union acpi_operand_object **return_object); +void +acpi_ns_check_argument_count(char *pathname, + struct acpi_namespace_node *node, + u32 user_param_count, + const union acpi_predefined_info *info); void -acpi_ns_check_parameter_count(char *pathname, +acpi_ns_check_acpi_compliance(char *pathname, struct acpi_namespace_node *node, - u32 user_param_count, - const union acpi_predefined_info *info); + const union acpi_predefined_info *predefined); + +void acpi_ns_check_argument_types(struct acpi_evaluate_info *info); + +/* + * nspredef - Return value checking for predefined/reserved names + */ +acpi_status +acpi_ns_check_return_value(struct acpi_namespace_node *node, + struct acpi_evaluate_info *info, + u32 user_param_count, + acpi_status return_status, + union acpi_operand_object **return_object); acpi_status -acpi_ns_check_object_type(struct acpi_predefined_data *data, +acpi_ns_check_object_type(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr, u32 expected_btypes, u32 package_index); @@ -246,7 +257,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, * nsprepkg - Validation of predefined name packages */ acpi_status -acpi_ns_check_package(struct acpi_predefined_data *data, +acpi_ns_check_package(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); /* @@ -308,24 +319,24 @@ acpi_ns_get_attached_data(struct acpi_namespace_node *node, * predefined methods/objects */ acpi_status -acpi_ns_simple_repair(struct acpi_predefined_data *data, +acpi_ns_simple_repair(struct acpi_evaluate_info *info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr); acpi_status -acpi_ns_wrap_with_package(struct acpi_predefined_data *data, +acpi_ns_wrap_with_package(struct acpi_evaluate_info *info, union acpi_operand_object *original_object, union acpi_operand_object **obj_desc_ptr); acpi_status -acpi_ns_repair_null_element(struct acpi_predefined_data *data, +acpi_ns_repair_null_element(struct acpi_evaluate_info *info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr); void -acpi_ns_remove_null_elements(struct acpi_predefined_data *data, +acpi_ns_remove_null_elements(struct acpi_evaluate_info *info, u8 package_type, union acpi_operand_object *obj_desc); @@ -334,7 +345,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, * predefined methods/objects */ acpi_status -acpi_ns_complex_repairs(struct acpi_predefined_data *data, +acpi_ns_complex_repairs(struct acpi_evaluate_info *info, struct acpi_namespace_node *node, acpi_status validate_status, union acpi_operand_object **return_object_ptr); diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index b22b709..f600aded 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -128,8 +128,8 @@ enum acpi_return_package_types { #define ARG_COUNT_IS_MINIMUM 0x8000 #define METHOD_MAX_ARG_TYPE ACPI_TYPE_PACKAGE -#define METHOD_GET_COUNT(arg_list) (arg_list & METHOD_ARG_MASK) -#define METHOD_GET_NEXT_ARG(arg_list) (arg_list >> METHOD_ARG_BIT_WIDTH) +#define METHOD_GET_ARG_COUNT(arg_list) ((arg_list) & METHOD_ARG_MASK) +#define METHOD_GET_NEXT_TYPE(arg_list) (((arg_list) >>= METHOD_ARG_BIT_WIDTH) & METHOD_ARG_MASK) /* Macros used to build the predefined info table */ diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h index 7896d85..fc83c0a 100644 --- a/drivers/acpi/acpica/acstruct.h +++ b/drivers/acpi/acpica/acstruct.h @@ -178,25 +178,41 @@ union acpi_aml_operands { }; /* - * Structure used to pass object evaluation parameters. + * Structure used to pass object evaluation information and parameters. * Purpose is to reduce CPU stack use. */ struct acpi_evaluate_info { - struct acpi_namespace_node *prefix_node; - char *pathname; - union acpi_operand_object *obj_desc; - union acpi_operand_object **parameters; - struct acpi_namespace_node *resolved_node; - union acpi_operand_object *return_object; - u8 param_count; - u8 pass_number; - u8 return_object_type; - u8 flags; + /* The first 3 elements are passed by the caller to acpi_ns_evaluate */ + + struct acpi_namespace_node *prefix_node; /* Input: starting node */ + char *relative_pathname; /* Input: path relative to prefix_node */ + union acpi_operand_object **parameters; /* Input: argument list */ + + struct acpi_namespace_node *node; /* Resolved node (prefix_node:relative_pathname) */ + union acpi_operand_object *obj_desc; /* Object attached to the resolved node */ + char *full_pathname; /* Full pathname of the resolved node */ + + const union acpi_predefined_info *predefined; /* Used if Node is a predefined name */ + union acpi_operand_object *return_object; /* Object returned from the evaluation */ + union acpi_operand_object *parent_package; /* Used if return object is a Package */ + + u32 return_flags; /* Used for return value analysis */ + u32 return_btype; /* Bitmapped type of the returned object */ + u16 param_count; /* Count of the input argument list */ + u8 pass_number; /* Parser pass number */ + u8 return_object_type; /* Object type of the returned object */ + u8 node_flags; /* Same as Node->Flags */ + u8 flags; /* General flags */ }; /* Values for Flags above */ -#define ACPI_IGNORE_RETURN_VALUE 1 +#define ACPI_IGNORE_RETURN_VALUE 1 + +/* Defines for return_flags field above */ + +#define ACPI_OBJECT_REPAIRED 1 +#define ACPI_OBJECT_WRAPPED 2 /* Info used by acpi_ns_initialize_devices */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 202f4f1..3c76ede 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -87,6 +87,48 @@ extern const char *acpi_gbl_fc_decode[]; extern const char *acpi_gbl_pt_decode[]; #endif +/* + * For the iASL compiler case, the output is redirected to stderr so that + * any of the various ACPI errors and warnings do not appear in the output + * files, for either the compiler or disassembler portions of the tool. + */ +#ifdef ACPI_ASL_COMPILER + +#include <stdio.h> +extern FILE *acpi_gbl_output_file; + +#define ACPI_MSG_REDIRECT_BEGIN \ + FILE *output_file = acpi_gbl_output_file; \ + acpi_os_redirect_output (stderr); + +#define ACPI_MSG_REDIRECT_END \ + acpi_os_redirect_output (output_file); + +#else +/* + * non-iASL case - no redirection, nothing to do + */ +#define ACPI_MSG_REDIRECT_BEGIN +#define ACPI_MSG_REDIRECT_END +#endif + +/* + * Common error message prefixes + */ +#define ACPI_MSG_ERROR "ACPI Error: " +#define ACPI_MSG_EXCEPTION "ACPI Exception: " +#define ACPI_MSG_WARNING "ACPI Warning: " +#define ACPI_MSG_INFO "ACPI: " + +#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Error (bug): " +#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Warning (bug): " + +/* + * Common message suffix + */ +#define ACPI_MSG_SUFFIX \ + acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) + /* Types for Resource descriptor entries */ #define ACPI_INVALID_RESOURCE 0 @@ -578,7 +620,7 @@ void acpi_ut_print_string(char *string, u8 max_length); void ut_convert_backslashes(char *pathname); -u8 acpi_ut_valid_acpi_name(u32 name); +u8 acpi_ut_valid_acpi_name(char *name); u8 acpi_ut_valid_acpi_char(char character, u32 position); @@ -670,6 +712,12 @@ acpi_ut_predefined_info(const char *module_name, u32 line_number, char *pathname, u8 node_flags, const char *format, ...); +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_bios_error(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...); + void acpi_ut_namespace_error(const char *module_name, u32 line_number, diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c index 7ea0f16..eb56b66 100644 --- a/drivers/acpi/acpica/dscontrol.c +++ b/drivers/acpi/acpica/dscontrol.c @@ -78,7 +78,6 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, switch (op->common.aml_opcode) { case AML_WHILE_OP: - /* * If this is an additional iteration of a while loop, continue. * There is no need to allocate a new control state. @@ -99,7 +98,6 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, /*lint -fallthrough */ case AML_IF_OP: - /* * IF/WHILE: Create a new control state to manage these * constructs. We need to manage these as a stack, in order @@ -142,6 +140,7 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, break; default: + break; } @@ -344,6 +343,7 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state, case AML_NOOP_OP: /* Just do nothing! */ + break; case AML_BREAK_POINT_OP: diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c index feadeed..d4bfe7b 100644 --- a/drivers/acpi/acpica/dsfield.c +++ b/drivers/acpi/acpica/dsfield.c @@ -563,21 +563,25 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, */ switch (walk_state->opcode) { case AML_FIELD_OP: + arg = acpi_ps_get_arg(op, 2); type = ACPI_TYPE_LOCAL_REGION_FIELD; break; case AML_BANK_FIELD_OP: + arg = acpi_ps_get_arg(op, 4); type = ACPI_TYPE_LOCAL_BANK_FIELD; break; case AML_INDEX_FIELD_OP: + arg = acpi_ps_get_arg(op, 3); type = ACPI_TYPE_LOCAL_INDEX_FIELD; break; default: + return_ACPI_STATUS(AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c index bc8e63f..1442420 100644 --- a/drivers/acpi/acpica/dsinit.c +++ b/drivers/acpi/acpica/dsinit.c @@ -127,6 +127,7 @@ acpi_ds_init_one_object(acpi_handle obj_handle, break; default: + break; } diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c index 3da8046..c4b0b36 100644 --- a/drivers/acpi/acpica/dsmthdat.c +++ b/drivers/acpi/acpica/dsmthdat.c @@ -285,6 +285,7 @@ acpi_ds_method_data_get_node(u8 type, break; default: + ACPI_ERROR((AE_INFO, "Type %u is invalid", type)); return_ACPI_STATUS(AE_TYPE); } @@ -428,7 +429,6 @@ acpi_ds_method_data_get_value(u8 type, return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG); case ACPI_REFCLASS_LOCAL: - /* * No error message for this case, will be trapped again later to * detect and ignore cases of Store(local_x,local_x) diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c index e20e9f8..63f0d22 100644 --- a/drivers/acpi/acpica/dsobject.c +++ b/drivers/acpi/acpica/dsobject.c @@ -648,7 +648,6 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, switch (obj_desc->common.type) { case ACPI_TYPE_BUFFER: - /* * Defer evaluation of Buffer term_arg operand */ @@ -660,7 +659,6 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, break; case ACPI_TYPE_PACKAGE: - /* * Defer evaluation of Package term_arg operand */ @@ -741,6 +739,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, break; default: + ACPI_ERROR((AE_INFO, "Unknown Integer type 0x%X", op_info->type)); status = AE_AML_OPERAND_TYPE; diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c index ee6367b..1fc1ff1 100644 --- a/drivers/acpi/acpica/dsopcode.c +++ b/drivers/acpi/acpica/dsopcode.c @@ -636,6 +636,7 @@ acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state, break; default: + return_ACPI_STATUS(AE_AML_BAD_OPCODE); } diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c index 9977899..c666fc0 100644 --- a/drivers/acpi/acpica/dsutils.c +++ b/drivers/acpi/acpica/dsutils.c @@ -240,7 +240,6 @@ acpi_ds_is_result_used(union acpi_parse_object * op, case AML_IF_OP: case AML_WHILE_OP: - /* * If we are executing the predicate AND this is the predicate op, * we will use the return value @@ -254,7 +253,9 @@ acpi_ds_is_result_used(union acpi_parse_object * op, break; default: + /* Ignore other control opcodes */ + break; } @@ -263,7 +264,6 @@ acpi_ds_is_result_used(union acpi_parse_object * op, goto result_not_used; case AML_CLASS_CREATE: - /* * These opcodes allow term_arg(s) as operands and therefore * the operands can be method calls. The result is used. @@ -292,7 +292,6 @@ acpi_ds_is_result_used(union acpi_parse_object * op, goto result_not_used; default: - /* * In all other cases. the parent will actually use the return * object, so keep it. diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index e2199a9..151d924 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -327,6 +327,7 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state, break; default: + break; } @@ -488,7 +489,6 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state) break; case AML_TYPE_METHOD_CALL: - /* * If the method is referenced from within a package * declaration, it is not a invocation of the method, just @@ -582,7 +582,6 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state) switch (op->common.parent->common.aml_opcode) { case AML_NAME_OP: - /* * Put the Node on the object stack (Contains the ACPI Name * of this object) diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c index 6e17c0e..95e681a 100644 --- a/drivers/acpi/acpica/dswload.c +++ b/drivers/acpi/acpica/dswload.c @@ -74,6 +74,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) switch (pass_number) { case 1: + walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE; walk_state->descending_callback = acpi_ds_load1_begin_op; @@ -81,6 +82,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) break; case 2: + walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE; walk_state->descending_callback = acpi_ds_load2_begin_op; @@ -88,6 +90,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) break; case 3: + #ifndef ACPI_NO_METHOD_EXECUTION walk_state->parse_flags |= ACPI_PARSE_EXECUTE | ACPI_PARSE_DELETE_TREE; @@ -97,6 +100,7 @@ acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) break; default: + return (AE_BAD_PARAMETER); } @@ -161,7 +165,6 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, switch (walk_state->opcode) { case AML_SCOPE_OP: - /* * The target name of the Scope() operator must exist at this point so * that we can actually open the scope to enter new names underneath it. @@ -210,7 +213,6 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: - /* * These types we will allow, but we will change the type. * This enables some existing code of the form: @@ -232,7 +234,6 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, break; case ACPI_TYPE_METHOD: - /* * Allow scope change to root during execution of module-level * code. Root is typed METHOD during this time. diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c index 4407ff2..b1f8f47 100644 --- a/drivers/acpi/acpica/dswload2.c +++ b/drivers/acpi/acpica/dswload2.c @@ -509,6 +509,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) break; default: + /* All NAMED_FIELD opcodes must be handled above */ break; } @@ -548,6 +549,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) break; default: + /* Unknown opcode */ status = AE_OK; @@ -674,6 +676,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) #endif /* ACPI_NO_METHOD_EXECUTION */ default: + /* All NAMED_COMPLEX opcodes must be handled above */ break; } @@ -721,6 +724,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) break; default: + break; } diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index a621481..fdb0a76 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -128,6 +128,7 @@ acpi_status acpi_ev_remove_global_lock_handler(void) status = acpi_remove_fixed_event_handler(ACPI_EVENT_GLOBAL, acpi_ev_global_lock_handler); + acpi_os_delete_lock(acpi_gbl_global_lock_pending_lock); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index a493b52..c8a1f7d 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -529,7 +529,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) switch (local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) { case ACPI_GPE_DISPATCH_NOTIFY: - /* * Implicit notify. * Dispatch a DEVICE_WAKE notify to the appropriate handler. @@ -579,11 +578,11 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) (local_gpe_event_info->dispatch. method_node))); } - break; default: - return_VOID; /* Should never happen */ + + return_VOID; /* Should never happen */ } /* Defer enabling of GPE until all notify handlers are done */ @@ -755,7 +754,6 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, case ACPI_GPE_DISPATCH_METHOD: case ACPI_GPE_DISPATCH_NOTIFY: - /* * Execute the method associated with the GPE * NOTE: Level-triggered GPEs are cleared after the method completes. @@ -771,7 +769,6 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, break; default: - /* * No handler or method to run! * 03/2010: This case should no longer be possible. We will not allow diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index a2d688b..c1aa1ed 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -382,6 +382,8 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, status = acpi_ev_install_gpe_block(gpe_block, interrupt_number); if (ACPI_FAILURE(status)) { + ACPI_FREE(gpe_block->register_info); + ACPI_FREE(gpe_block->event_info); ACPI_FREE(gpe_block); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index 72b8f6b..9037f17 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -363,14 +363,17 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, */ switch (name[1]) { case 'L': + type = ACPI_GPE_LEVEL_TRIGGERED; break; case 'E': + type = ACPI_GPE_EDGE_TRIGGERED; break; default: + /* Unknown method type, just ignore it */ ACPI_DEBUG_PRINT((ACPI_DB_LOAD, diff --git a/drivers/acpi/acpica/evhandler.c b/drivers/acpi/acpica/evhandler.c index d4f8311..068af96 100644 --- a/drivers/acpi/acpica/evhandler.c +++ b/drivers/acpi/acpica/evhandler.c @@ -354,36 +354,43 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node, switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: + handler = acpi_ex_system_memory_space_handler; setup = acpi_ev_system_memory_region_setup; break; case ACPI_ADR_SPACE_SYSTEM_IO: + handler = acpi_ex_system_io_space_handler; setup = acpi_ev_io_space_region_setup; break; case ACPI_ADR_SPACE_PCI_CONFIG: + handler = acpi_ex_pci_config_space_handler; setup = acpi_ev_pci_config_region_setup; break; case ACPI_ADR_SPACE_CMOS: + handler = acpi_ex_cmos_space_handler; setup = acpi_ev_cmos_region_setup; break; case ACPI_ADR_SPACE_PCI_BAR_TARGET: + handler = acpi_ex_pci_bar_space_handler; setup = acpi_ev_pci_bar_region_setup; break; case ACPI_ADR_SPACE_DATA_TABLE: + handler = acpi_ex_data_table_space_handler; setup = NULL; break; default: + status = AE_BAD_PARAMETER; goto unlock_and_exit; } diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index c986b23..1b111ef 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -78,6 +78,7 @@ u8 acpi_ev_is_notify_object(struct acpi_namespace_node *node) return (TRUE); default: + return (FALSE); } } @@ -275,6 +276,8 @@ void acpi_ev_terminate(void) ACPI_ERROR((AE_INFO, "Could not remove Global Lock handler")); } + + acpi_gbl_events_initialized = FALSE; } /* Deallocate all handler objects installed within GPE info structs */ diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 6555e35..cea14d6 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -54,7 +54,8 @@ extern u8 acpi_gbl_default_address_spaces[]; /* Local prototypes */ -static void acpi_ev_orphan_ec_reg_method(void); +static void +acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node *ec_device_node); static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, @@ -532,7 +533,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) } info->prefix_node = region_obj2->extra.method_REG; - info->pathname = NULL; + info->relative_pathname = NULL; info->parameters = args; info->flags = ACPI_IGNORE_RETURN_VALUE; @@ -612,7 +613,7 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, /* Special case for EC: handle "orphan" _REG methods with no region */ if (space_id == ACPI_ADR_SPACE_EC) { - acpi_ev_orphan_ec_reg_method(); + acpi_ev_orphan_ec_reg_method(node); } return_ACPI_STATUS(status); @@ -681,7 +682,7 @@ acpi_ev_reg_run(acpi_handle obj_handle, * * FUNCTION: acpi_ev_orphan_ec_reg_method * - * PARAMETERS: None + * PARAMETERS: ec_device_node - Namespace node for an EC device * * RETURN: None * @@ -693,37 +694,27 @@ acpi_ev_reg_run(acpi_handle obj_handle, * detected by providing a _REG method object underneath the * Embedded Controller device." * - * To quickly access the EC device, we use the EC_ID that appears - * within the ECDT. Otherwise, we would need to perform a time- - * consuming namespace walk, executing _HID methods to find the - * EC device. + * To quickly access the EC device, we use the ec_device_node used + * during EC handler installation. Otherwise, we would need to + * perform a time consuming namespace walk, executing _HID + * methods to find the EC device. + * + * MUTEX: Assumes the namespace is locked * ******************************************************************************/ -static void acpi_ev_orphan_ec_reg_method(void) +static void +acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node *ec_device_node) { - struct acpi_table_ecdt *table; + acpi_handle reg_method; + struct acpi_namespace_node *next_node; acpi_status status; struct acpi_object_list args; union acpi_object objects[2]; - struct acpi_namespace_node *ec_device_node; - struct acpi_namespace_node *reg_method; - struct acpi_namespace_node *next_node; ACPI_FUNCTION_TRACE(ev_orphan_ec_reg_method); - /* Get the ECDT (if present in system) */ - - status = acpi_get_table(ACPI_SIG_ECDT, 0, - ACPI_CAST_INDIRECT_PTR(struct acpi_table_header, - &table)); - if (ACPI_FAILURE(status)) { - return_VOID; - } - - /* We need a valid EC_ID string */ - - if (!(*table->id)) { + if (!ec_device_node) { return_VOID; } @@ -731,22 +722,11 @@ static void acpi_ev_orphan_ec_reg_method(void) (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - /* Get a handle to the EC device referenced in the ECDT */ - - status = acpi_get_handle(NULL, - ACPI_CAST_PTR(char, table->id), - ACPI_CAST_PTR(acpi_handle, &ec_device_node)); - if (ACPI_FAILURE(status)) { - goto exit; - } - /* Get a handle to a _REG method immediately under the EC device */ - status = acpi_get_handle(ec_device_node, - METHOD_NAME__REG, ACPI_CAST_PTR(acpi_handle, - ®_method)); + status = acpi_get_handle(ec_device_node, METHOD_NAME__REG, ®_method); if (ACPI_FAILURE(status)) { - goto exit; + goto exit; /* There is no _REG method present */ } /* @@ -754,19 +734,20 @@ static void acpi_ev_orphan_ec_reg_method(void) * this scope with the Embedded Controller space ID. Otherwise, it * will already have been executed. Note, this allows for Regions * with other space IDs to be present; but the code below will then - * execute the _REG method with the EC space ID argument. + * execute the _REG method with the embedded_control space_ID argument. */ next_node = acpi_ns_get_next_node(ec_device_node, NULL); while (next_node) { if ((next_node->type == ACPI_TYPE_REGION) && (next_node->object) && (next_node->object->region.space_id == ACPI_ADR_SPACE_EC)) { - goto exit; /* Do not execute _REG */ + goto exit; /* Do not execute the _REG */ } + next_node = acpi_ns_get_next_node(ec_device_node, next_node); } - /* Evaluate the _REG(EC,Connect) method */ + /* Evaluate the _REG(embedded_control,Connect) method */ args.count = 2; args.pointer = objects; diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index 3bb6167..8354c4f 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -596,7 +596,9 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj, break; default: + /* Ignore other objects */ + break; } diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index aff4cc2..7662f1a 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -366,16 +366,19 @@ acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action) switch (action) { case ACPI_GPE_ENABLE: + ACPI_SET_BIT(gpe_register_info->enable_for_wake, (u8)register_bit); break; case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, (u8)register_bit); break; default: + ACPI_ERROR((AE_INFO, "%u, Invalid action", action)); status = AE_BAD_PARAMETER; break; diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index 96c9e5f..80cecf8 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -139,6 +139,7 @@ acpi_install_address_space_handler(acpi_handle device, break; default: + break; } diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index d93b70b..06d216c 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -480,6 +480,7 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, break; default: + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } @@ -588,7 +589,7 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) (ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) || (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE) || (!(ddb_handle->common.flags & AOPOBJ_DATA_VALID))) { - return_ACPI_STATUS(AE_BAD_PARAMETER); + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* Get the table index from the ddb_handle */ diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c index d2b9613..69e4a8c 100644 --- a/drivers/acpi/acpica/exconvrt.c +++ b/drivers/acpi/acpica/exconvrt.c @@ -99,6 +99,7 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, break; default: + return_ACPI_STATUS(AE_TYPE); } @@ -117,7 +118,6 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, switch (obj_desc->common.type) { case ACPI_TYPE_STRING: - /* * Convert string to an integer - for most cases, the string must be * hexadecimal as per the ACPI specification. The only exception (as @@ -161,6 +161,7 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, default: /* No other types can get here */ + break; } @@ -213,7 +214,6 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, return_ACPI_STATUS(AE_OK); case ACPI_TYPE_INTEGER: - /* * Create a new Buffer object. * Need enough space for one integer @@ -233,7 +233,6 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, break; case ACPI_TYPE_STRING: - /* * Create a new Buffer object * Size will be the string length @@ -258,6 +257,7 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, break; default: + return_ACPI_STATUS(AE_TYPE); } @@ -304,15 +304,18 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 data_width) switch (data_width) { case 1: + decimal_length = ACPI_MAX8_DECIMAL_DIGITS; break; case 4: + decimal_length = ACPI_MAX32_DECIMAL_DIGITS; break; case 8: default: + decimal_length = ACPI_MAX64_DECIMAL_DIGITS; break; } @@ -546,6 +549,7 @@ acpi_ex_convert_to_string(union acpi_operand_object * obj_desc, break; default: + return_ACPI_STATUS(AE_TYPE); } @@ -599,6 +603,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, break; default: + /* No conversion allowed for these types */ if (destination_type != source_desc->common.type) { @@ -649,6 +654,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, break; default: + ACPI_ERROR((AE_INFO, "Bad destination type during conversion: 0x%X", destination_type)); @@ -664,6 +670,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, break; default: + ACPI_ERROR((AE_INFO, "Unknown Target type ID 0x%X AmlOpcode 0x%X DestType %s", GET_CURRENT_ARG_TYPE(walk_state->op_info-> diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c index 26a13f6..269e81d 100644 --- a/drivers/acpi/acpica/excreate.c +++ b/drivers/acpi/acpica/excreate.c @@ -103,7 +103,6 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) case ACPI_TYPE_BUFFER: case ACPI_TYPE_PACKAGE: case ACPI_TYPE_BUFFER_FIELD: - /* * These types open a new scope, so we need the NS node in order to access * any children. @@ -113,7 +112,6 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) case ACPI_TYPE_PROCESSOR: case ACPI_TYPE_THERMAL: case ACPI_TYPE_LOCAL_SCOPE: - /* * The new alias has the type ALIAS and points to the original * NS node, not the object itself. @@ -124,7 +122,6 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) break; case ACPI_TYPE_METHOD: - /* * Control method aliases need to be differentiated */ diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c index 7eb853c..81c72a4 100644 --- a/drivers/acpi/acpica/exdebug.c +++ b/drivers/acpi/acpica/exdebug.c @@ -193,6 +193,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc, return_VOID; default: + break; } @@ -226,6 +227,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc, break; default: + acpi_ex_do_debug_object((source_desc-> reference. node)->object, diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index e5a3c24..c740f24 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -357,6 +357,7 @@ acpi_ex_dump_object(union acpi_operand_object *obj_desc, switch (info->opcode) { case ACPI_EXD_INIT: + break; case ACPI_EXD_TYPE: @@ -718,6 +719,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) break; default: + /* Unknown Type */ acpi_os_printf("Unknown Type %X\n", obj_desc->common.type); diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index 7d4bae7..c2a65aa 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -331,21 +331,25 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, switch (source_desc->common.type) { case ACPI_TYPE_INTEGER: + buffer = &source_desc->integer.value; length = sizeof(source_desc->integer.value); break; case ACPI_TYPE_BUFFER: + buffer = source_desc->buffer.pointer; length = source_desc->buffer.length; break; case ACPI_TYPE_STRING: + buffer = source_desc->string.pointer; length = source_desc->string.length; break; default: + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index c84ee95..7e0afe7 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -446,7 +446,6 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, break; case ACPI_TYPE_LOCAL_BANK_FIELD: - /* * Ensure that the bank_value is not beyond the capacity of * the register @@ -488,7 +487,6 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, break; case ACPI_TYPE_LOCAL_INDEX_FIELD: - /* * Ensure that the index_value is not beyond the capacity of * the register diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 72a2a13..00bf298 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -105,7 +105,6 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc, break; case ACPI_DESC_TYPE_NAMED: - /* * A named reference that has already been resolved to a Node */ @@ -261,20 +260,24 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, */ switch (operand0->common.type) { case ACPI_TYPE_INTEGER: + status = acpi_ex_convert_to_integer(operand1, &local_operand1, 16); break; case ACPI_TYPE_STRING: + status = acpi_ex_convert_to_string(operand1, &local_operand1, ACPI_IMPLICIT_CONVERT_HEX); break; case ACPI_TYPE_BUFFER: + status = acpi_ex_convert_to_buffer(operand1, &local_operand1); break; default: + ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X", operand0->common.type)); status = AE_AML_INTERNAL; @@ -519,6 +522,7 @@ acpi_ex_do_logical_numeric_op(u16 opcode, break; default: + status = AE_AML_INTERNAL; break; } @@ -580,20 +584,24 @@ acpi_ex_do_logical_op(u16 opcode, */ switch (operand0->common.type) { case ACPI_TYPE_INTEGER: + status = acpi_ex_convert_to_integer(operand1, &local_operand1, 16); break; case ACPI_TYPE_STRING: + status = acpi_ex_convert_to_string(operand1, &local_operand1, ACPI_IMPLICIT_CONVERT_HEX); break; case ACPI_TYPE_BUFFER: + status = acpi_ex_convert_to_buffer(operand1, &local_operand1); break; default: + status = AE_AML_INTERNAL; break; } @@ -636,6 +644,7 @@ acpi_ex_do_logical_op(u16 opcode, break; default: + status = AE_AML_INTERNAL; break; } @@ -703,6 +712,7 @@ acpi_ex_do_logical_op(u16 opcode, break; default: + status = AE_AML_INTERNAL; break; } diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c index b60c877..814b4a3 100644 --- a/drivers/acpi/acpica/exoparg1.c +++ b/drivers/acpi/acpica/exoparg1.c @@ -327,7 +327,6 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state) break; case AML_FROM_BCD_OP: /* from_bcd (BCDValue, Result) */ - /* * The 64-bit ACPI integer can hold 16 4-bit BCD characters * (if table is 32-bit, integer can hold 8 BCD characters) @@ -407,7 +406,6 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state) break; case AML_COND_REF_OF_OP: /* cond_ref_of (source_object, Result) */ - /* * This op is a little strange because the internal return value is * different than the return value stored in the result descriptor @@ -442,13 +440,14 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state) goto cleanup; default: + /* No other opcodes get here */ + break; } break; case AML_STORE_OP: /* Store (Source, Target) */ - /* * A store operand is typically a number, string, buffer or lvalue * Be careful about deleting the source object, @@ -615,7 +614,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) case AML_DECREMENT_OP: /* Decrement (Operand) */ case AML_INCREMENT_OP: /* Increment (Operand) */ - /* * Create a new integer. Can't just get the base integer and * increment it because it may be an Arg or Field. @@ -682,7 +680,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case AML_TYPE_OP: /* object_type (source_object) */ - /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. For example, we don't @@ -709,7 +706,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case AML_SIZE_OF_OP: /* size_of (source_object) */ - /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. @@ -735,10 +731,12 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) */ switch (type) { case ACPI_TYPE_INTEGER: + value = acpi_gbl_integer_byte_width; break; case ACPI_TYPE_STRING: + value = temp_desc->string.length; break; @@ -759,6 +757,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; default: + ACPI_ERROR((AE_INFO, "Operand must be Buffer/Integer/String/Package - found type %s", acpi_ut_get_type_name(type))); @@ -860,9 +859,11 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case ACPI_TYPE_STRING: + break; default: + status = AE_AML_OPERAND_TYPE; goto cleanup; } @@ -923,7 +924,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) */ switch (operand[0]->reference.class) { case ACPI_REFCLASS_INDEX: - /* * The target type for the Index operator must be * either a Buffer or a Package @@ -956,7 +956,6 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; case ACPI_TYPE_PACKAGE: - /* * Return the referenced element of the package. We must * add another reference to the referenced object, however. @@ -999,6 +998,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) break; default: + ACPI_ERROR((AE_INFO, "Unknown class in reference(%p) - 0x%2.2X", operand[0], diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c index b0838a4..d5088f7 100644 --- a/drivers/acpi/acpica/exoparg2.c +++ b/drivers/acpi/acpica/exoparg2.c @@ -304,7 +304,6 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state) break; case AML_TO_STRING_OP: /* to_string (Buffer, Length, Result) (ACPI 2.0) */ - /* * Input object is guaranteed to be a buffer at this point (it may have * been converted.) Copy the raw buffer data to a new object of diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c index 2d7491f..37656f1 100644 --- a/drivers/acpi/acpica/exoparg3.c +++ b/drivers/acpi/acpica/exoparg3.c @@ -155,7 +155,6 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state) switch (walk_state->opcode) { case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */ - /* * Create the return object. The Source operand is guaranteed to be * either a String or a Buffer, so just use its type. diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c index b76b970..879b6cd 100644 --- a/drivers/acpi/acpica/exoparg6.c +++ b/drivers/acpi/acpica/exoparg6.c @@ -119,7 +119,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MEQ: - /* * True if equal: (P[i] == M) * Change to: (M == P[i]) @@ -133,7 +132,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MLE: - /* * True if less than or equal: (P[i] <= M) (P[i] not_greater than M) * Change to: (M >= P[i]) (M not_less than P[i]) @@ -148,7 +146,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MLT: - /* * True if less than: (P[i] < M) * Change to: (M > P[i]) @@ -162,7 +159,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MGE: - /* * True if greater than or equal: (P[i] >= M) (P[i] not_less than M) * Change to: (M <= P[i]) (M not_greater than P[i]) @@ -177,7 +173,6 @@ acpi_ex_do_match(u32 match_op, break; case MATCH_MGT: - /* * True if greater than: (P[i] > M) * Change to: (M < P[i]) diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index 6b728ae..5a58861 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -253,26 +253,31 @@ acpi_ex_decode_field_access(union acpi_operand_object *obj_desc, case AML_FIELD_ACCESS_BYTE: case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */ + byte_alignment = 1; bit_length = 8; break; case AML_FIELD_ACCESS_WORD: + byte_alignment = 2; bit_length = 16; break; case AML_FIELD_ACCESS_DWORD: + byte_alignment = 4; bit_length = 32; break; case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */ + byte_alignment = 8; bit_length = 64; break; default: + /* Invalid field access type */ ACPI_ERROR((AE_INFO, "Unknown field access type 0x%X", access)); @@ -598,7 +603,9 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) break; default: + /* No other types should get here */ + break; } diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 182abaf..303429bb 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -88,22 +88,27 @@ acpi_ex_system_memory_space_handler(u32 function, switch (bit_width) { case 8: + length = 1; break; case 16: + length = 2; break; case 32: + length = 4; break; case 64: + length = 8; break; default: + ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %u", bit_width)); return_ACPI_STATUS(AE_AML_OPERAND_VALUE); @@ -214,23 +219,29 @@ acpi_ex_system_memory_space_handler(u32 function, *value = 0; switch (bit_width) { case 8: - *value = (u64) ACPI_GET8(logical_addr_ptr); + + *value = (u64)ACPI_GET8(logical_addr_ptr); break; case 16: - *value = (u64) ACPI_GET16(logical_addr_ptr); + + *value = (u64)ACPI_GET16(logical_addr_ptr); break; case 32: - *value = (u64) ACPI_GET32(logical_addr_ptr); + + *value = (u64)ACPI_GET32(logical_addr_ptr); break; case 64: - *value = (u64) ACPI_GET64(logical_addr_ptr); + + *value = (u64)ACPI_GET64(logical_addr_ptr); break; default: + /* bit_width was already validated */ + break; } break; @@ -239,28 +250,35 @@ acpi_ex_system_memory_space_handler(u32 function, switch (bit_width) { case 8: + ACPI_SET8(logical_addr_ptr, *value); break; case 16: + ACPI_SET16(logical_addr_ptr, *value); break; case 32: + ACPI_SET32(logical_addr_ptr, *value); break; case 64: + ACPI_SET64(logical_addr_ptr, *value); break; default: + /* bit_width was already validated */ + break; } break; default: + status = AE_BAD_PARAMETER; break; } @@ -320,6 +338,7 @@ acpi_ex_system_io_space_handler(u32 function, break; default: + status = AE_BAD_PARAMETER; break; } diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c index 8565b6b..acd34f5 100644 --- a/drivers/acpi/acpica/exresnte.c +++ b/drivers/acpi/acpica/exresnte.c @@ -248,6 +248,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr, break; default: + /* No named references are allowed here */ ACPI_ERROR((AE_INFO, diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c index e4f9dfb..ac04278 100644 --- a/drivers/acpi/acpica/exresolv.c +++ b/drivers/acpi/acpica/exresolv.c @@ -156,7 +156,6 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, switch (ref_type) { case ACPI_REFCLASS_LOCAL: case ACPI_REFCLASS_ARG: - /* * Get the local from the method's state info * Note: this increments the local's object reference count @@ -309,6 +308,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, break; default: + break; } @@ -348,10 +348,12 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state, switch (ACPI_GET_DESCRIPTOR_TYPE(obj_desc)) { case ACPI_DESC_TYPE_OPERAND: + type = obj_desc->common.type; break; case ACPI_DESC_TYPE_NAMED: + type = ((struct acpi_namespace_node *)obj_desc)->type; obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *) @@ -538,7 +540,9 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state, break; default: + /* No change to Type required */ + break; } diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index 9fb9f5e..00e5af7 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -307,7 +307,6 @@ acpi_ex_resolve_operands(u16 opcode, case ARGI_TARGETREF: /* Allows implicit conversion rules before store */ case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */ case ARGI_SIMPLE_TARGET: /* Name, Local, or arg - no implicit conversion */ - /* * Need an operand of type ACPI_TYPE_LOCAL_REFERENCE * A Namespace Node is OK as-is @@ -326,7 +325,6 @@ acpi_ex_resolve_operands(u16 opcode, goto next_operand; case ARGI_DATAREFOBJ: /* Store operator only */ - /* * We don't want to resolve index_op reference objects during * a store because this would be an implicit de_ref_of operation. @@ -343,7 +341,9 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + /* All cases covered above */ + break; } @@ -433,7 +433,6 @@ acpi_ex_resolve_operands(u16 opcode, goto next_operand; case ARGI_BUFFER: - /* * Need an operand of type ACPI_TYPE_BUFFER, * But we can implicitly convert from a STRING or INTEGER @@ -459,7 +458,6 @@ acpi_ex_resolve_operands(u16 opcode, goto next_operand; case ARGI_STRING: - /* * Need an operand of type ACPI_TYPE_STRING, * But we can implicitly convert from a BUFFER or INTEGER @@ -562,6 +560,7 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + ACPI_ERROR((AE_INFO, "Needed [Buffer/String/Package/Reference], found [%s] %p", acpi_ut_get_object_type_name @@ -584,6 +583,7 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + ACPI_ERROR((AE_INFO, "Needed [Buffer/String/Package], found [%s] %p", acpi_ut_get_object_type_name @@ -605,6 +605,7 @@ acpi_ex_resolve_operands(u16 opcode, break; default: + ACPI_ERROR((AE_INFO, "Needed [Region/Buffer], found [%s] %p", acpi_ut_get_object_type_name diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c index 93c6049..2bdba6f 100644 --- a/drivers/acpi/acpica/exstore.c +++ b/drivers/acpi/acpica/exstore.c @@ -114,6 +114,7 @@ acpi_ex_store(union acpi_operand_object *source_desc, switch (dest_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: + break; case ACPI_TYPE_INTEGER: @@ -178,7 +179,6 @@ acpi_ex_store(union acpi_operand_object *source_desc, break; case ACPI_REFCLASS_DEBUG: - /* * Storing to the Debug object causes the value stored to be * displayed and otherwise has no effect -- see ACPI Specification @@ -291,7 +291,6 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, break; case ACPI_TYPE_BUFFER_FIELD: - /* * Store into a Buffer or String (not actually a real buffer_field) * at a location defined by an Index. @@ -447,7 +446,6 @@ acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: - /* * These target types are all of type Integer/String/Buffer, and * therefore support implicit conversion before the store. diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c index 1cefe77..20d809d 100644 --- a/drivers/acpi/acpica/exstoren.c +++ b/drivers/acpi/acpica/exstoren.c @@ -85,11 +85,9 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, * These cases all require only Integers or values that * can be converted to Integers (Strings or Buffers) */ - case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: - /* * Stores into a Field/Region or into a Integer/Buffer/String * are all essentially the same. This case handles the @@ -133,7 +131,6 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, case ACPI_TYPE_LOCAL_ALIAS: case ACPI_TYPE_LOCAL_METHOD_ALIAS: - /* * All aliases should have been resolved earlier, during the * operand resolution phase. @@ -144,7 +141,6 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, case ACPI_TYPE_PACKAGE: default: - /* * All other types than Alias and the various Fields come here, * including the untyped case - ACPI_TYPE_ANY. diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index 579c3a5..3d36df8 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -108,7 +108,6 @@ acpi_status acpi_hw_set_mode(u32 mode) break; case ACPI_SYS_MODE_LEGACY: - /* * BIOS should clear all fixed status bits and restore fixed event * enable bits to default @@ -120,6 +119,7 @@ acpi_status acpi_hw_set_mode(u32 mode) break; default: + return_ACPI_STATUS(AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 20d02e9..9654050 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -127,14 +127,17 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action) /*lint -fallthrough */ case ACPI_GPE_ENABLE: + ACPI_SET_BIT(enable_mask, register_bit); break; case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(enable_mask, register_bit); break; default: + ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u", action)); return (AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 083d655..8d2e866 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -419,6 +419,7 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) break; default: + ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; @@ -491,7 +492,6 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; case ACPI_REGISTER_PM1_CONTROL: /* PM1 A/B: 16-bit access each */ - /* * Perform a read first to preserve certain bits (per ACPI spec) * Note: This includes SCI_EN, we never want to change this bit @@ -520,7 +520,6 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ - /* * For control registers, all reserved bits must be preserved, * as per the ACPI spec. @@ -555,6 +554,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; default: + ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 04c2e16..5ee7a814 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -495,7 +495,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) * Evaluate the \_Sx namespace object containing the register values * for this state */ - info->pathname = + info->relative_pathname = ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]); status = acpi_ns_evaluate(info); if (ACPI_FAILURE(status)) { @@ -506,7 +506,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) if (!info->return_object) { ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]", - info->pathname)); + info->relative_pathname)); status = AE_AML_NO_RETURN_VALUE; goto cleanup; } @@ -528,10 +528,12 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) elements = info->return_object->package.elements; switch (info->return_object->package.count) { case 0: + status = AE_AML_PACKAGE_LIMIT; break; case 1: + if (elements[0]->common.type != ACPI_TYPE_INTEGER) { status = AE_AML_OPERAND_TYPE; break; @@ -545,6 +547,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) case 2: default: + if ((elements[0]->common.type != ACPI_TYPE_INTEGER) || (elements[1]->common.type != ACPI_TYPE_INTEGER)) { status = AE_AML_OPERAND_TYPE; @@ -565,7 +568,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "While evaluating Sleep State [%s]", - info->pathname)); + info->relative_pathname)); } ACPI_FREE(info); diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index 35eebda..f2e669db 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -240,12 +240,14 @@ static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) &acpi_sleep_dispatch[function_id]; #if (!ACPI_REDUCED_HARDWARE) - /* * If the Hardware Reduced flag is set (from the FADT), we must - * use the extended sleep registers + * use the extended sleep registers (FADT). Note: As per the ACPI + * specification, these extended registers are to be used for HW-reduced + * platforms only. They are not general-purpose replacements for the + * legacy PM register sleep support. */ - if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + if (acpi_gbl_reduced_hardware) { status = sleep_functions->extended_function(sleep_state); } else { /* Legacy sleep */ @@ -314,20 +316,24 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) switch (sleep_state) { case ACPI_STATE_S0: + sst_value = ACPI_SST_WORKING; break; case ACPI_STATE_S1: case ACPI_STATE_S2: case ACPI_STATE_S3: + sst_value = ACPI_SST_SLEEPING; break; case ACPI_STATE_S4: + sst_value = ACPI_SST_SLEEP_CONTEXT; break; default: + sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */ break; } diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index 8769cf8..c5316e5 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -151,6 +151,7 @@ acpi_status acpi_ns_root_initialize(void) */ switch (init_val->type) { case ACPI_TYPE_METHOD: + obj_desc->method.param_count = (u8) ACPI_TO_INTEGER(val); obj_desc->common.flags |= AOPOBJ_DATA_VALID; diff --git a/drivers/acpi/acpica/nsarguments.c b/drivers/acpi/acpica/nsarguments.c new file mode 100644 index 0000000..74b24c8 --- /dev/null +++ b/drivers/acpi/acpica/nsarguments.c @@ -0,0 +1,294 @@ +/****************************************************************************** + * + * Module Name: nsarguments - Validation of args for ACPI predefined methods + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" +#include "acpredef.h" + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("nsarguments") + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_argument_types + * + * PARAMETERS: info - Method execution information block + * + * RETURN: None + * + * DESCRIPTION: Check the incoming argument count and all argument types + * against the argument type list for a predefined name. + * + ******************************************************************************/ +void acpi_ns_check_argument_types(struct acpi_evaluate_info *info) +{ + u16 arg_type_list; + u8 arg_count; + u8 arg_type; + u8 user_arg_type; + u32 i; + + /* If not a predefined name, cannot typecheck args */ + + if (!info->predefined) { + return; + } + + arg_type_list = info->predefined->info.argument_list; + arg_count = METHOD_GET_ARG_COUNT(arg_type_list); + + /* Typecheck all arguments */ + + for (i = 0; ((i < arg_count) && (i < info->param_count)); i++) { + arg_type = METHOD_GET_NEXT_TYPE(arg_type_list); + user_arg_type = info->parameters[i]->common.type; + + if (user_arg_type != arg_type) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + ACPI_WARN_ALWAYS, + "Argument #%u type mismatch - " + "Found [%s], ACPI requires [%s]", + (i + 1), + acpi_ut_get_type_name + (user_arg_type), + acpi_ut_get_type_name(arg_type))); + } + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_acpi_compliance + * + * PARAMETERS: pathname - Full pathname to the node (for error msgs) + * node - Namespace node for the method/object + * predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that the declared parameter count (in ASL/AML) for a + * predefined name is what is expected (matches what is defined in + * the ACPI specification for this predefined name.) + * + ******************************************************************************/ + +void +acpi_ns_check_acpi_compliance(char *pathname, + struct acpi_namespace_node *node, + const union acpi_predefined_info *predefined) +{ + u32 aml_param_count; + u32 required_param_count; + + if (!predefined) { + return; + } + + /* Get the ACPI-required arg count from the predefined info table */ + + required_param_count = + METHOD_GET_ARG_COUNT(predefined->info.argument_list); + + /* + * If this object is not a control method, we can check if the ACPI + * spec requires that it be a method. + */ + if (node->type != ACPI_TYPE_METHOD) { + if (required_param_count > 0) { + + /* Object requires args, must be implemented as a method */ + + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Object (%s) must be a control method with %u arguments", + acpi_ut_get_type_name(node-> + type), + required_param_count)); + } else if (!required_param_count + && !predefined->info.expected_btypes) { + + /* Object requires no args and no return value, must be a method */ + + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Object (%s) must be a control method " + "with no arguments and no return value", + acpi_ut_get_type_name(node-> + type))); + } + + return; + } + + /* + * This is a control method. + * Check that the ASL/AML-defined parameter count for this method + * matches the ACPI-required parameter count + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + * + * Note: These are BIOS errors in the declaration of the object + */ + aml_param_count = node->object->method.param_count; + + if (aml_param_count < required_param_count) { + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "ASL declared %u, ACPI requires %u", + aml_param_count, + required_param_count)); + } else if ((aml_param_count > required_param_count) + && !(predefined->info. + argument_list & ARG_COUNT_IS_MINIMUM)) { + ACPI_BIOS_ERROR_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "ASL declared %u, ACPI requires %u", + aml_param_count, + required_param_count)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_argument_count + * + * PARAMETERS: pathname - Full pathname to the node (for error msgs) + * node - Namespace node for the method/object + * user_param_count - Number of args passed in by the caller + * predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that incoming argument count matches the declared + * parameter count (in the ASL/AML) for an object. + * + ******************************************************************************/ + +void +acpi_ns_check_argument_count(char *pathname, + struct acpi_namespace_node *node, + u32 user_param_count, + const union acpi_predefined_info *predefined) +{ + u32 aml_param_count; + u32 required_param_count; + + if (!predefined) { + /* + * Not a predefined name. Check the incoming user argument count + * against the count that is specified in the method/object. + */ + if (node->type != ACPI_TYPE_METHOD) { + if (user_param_count) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "%u arguments were passed to a non-method ACPI object (%s)", + user_param_count, + acpi_ut_get_type_name + (node->type))); + } + + return; + } + + /* + * This is a control method. Check the parameter count. + * We can only check the incoming argument count against the + * argument count declared for the method in the ASL/AML. + * + * Emit a message if too few or too many arguments have been passed + * by the caller. + * + * Note: Too many arguments will not cause the method to + * fail. However, the method will fail if there are too few + * arguments and the method attempts to use one of the missing ones. + */ + aml_param_count = node->object->method.param_count; + + if (user_param_count < aml_param_count) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, method requires %u", + user_param_count, + aml_param_count)); + } else if (user_param_count > aml_param_count) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, method requires %u", + user_param_count, + aml_param_count)); + } + + return; + } + + /* + * This is a predefined name. Validate the user-supplied parameter + * count against the ACPI specification. We don't validate against + * the method itself because what is important here is that the + * caller is in conformance with the spec. (The arg count for the + * method was checked against the ACPI spec earlier.) + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + */ + required_param_count = + METHOD_GET_ARG_COUNT(predefined->info.argument_list); + + if (user_param_count < required_param_count) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, ACPI requires %u", + user_param_count, required_param_count)); + } else if ((user_param_count > required_param_count) && + !(predefined->info.argument_list & ARG_COUNT_IS_MINIMUM)) { + ACPI_INFO_PREDEFINED((AE_INFO, pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, ACPI requires %u", + user_param_count, required_param_count)); + } +} diff --git a/drivers/acpi/acpica/nsconvert.c b/drivers/acpi/acpica/nsconvert.c index 8f79a9d..acd2964 100644 --- a/drivers/acpi/acpica/nsconvert.c +++ b/drivers/acpi/acpica/nsconvert.c @@ -103,6 +103,7 @@ acpi_ns_convert_to_integer(union acpi_operand_object *original_object, break; default: + return (AE_AML_OPERAND_TYPE); } @@ -191,6 +192,7 @@ acpi_ns_convert_to_string(union acpi_operand_object *original_object, break; default: + return (AE_AML_OPERAND_TYPE); } @@ -294,6 +296,7 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, break; default: + return (AE_AML_OPERAND_TYPE); } diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index ce6e973..7418c77 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -244,10 +244,12 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, case ACPI_TYPE_BUFFER: case ACPI_TYPE_STRING: case ACPI_TYPE_METHOD: + acpi_os_printf("<No attached object>"); break; default: + break; } @@ -433,6 +435,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, break; default: + break; } break; @@ -567,32 +570,39 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, goto cleanup; case ACPI_TYPE_BUFFER_FIELD: + obj_desc = (union acpi_operand_object *)obj_desc->buffer_field. buffer_obj; break; case ACPI_TYPE_PACKAGE: + obj_desc = (void *)obj_desc->package.elements; break; case ACPI_TYPE_METHOD: + obj_desc = (void *)obj_desc->method.aml_start; break; case ACPI_TYPE_LOCAL_REGION_FIELD: + obj_desc = (void *)obj_desc->field.region_obj; break; case ACPI_TYPE_LOCAL_BANK_FIELD: + obj_desc = (void *)obj_desc->bank_field.region_obj; break; case ACPI_TYPE_LOCAL_INDEX_FIELD: + obj_desc = (void *)obj_desc->index_field.index_obj; break; default: + goto cleanup; } diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c index b61db69..18108bc 100644 --- a/drivers/acpi/acpica/nseval.c +++ b/drivers/acpi/acpica/nseval.c @@ -61,7 +61,7 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj, * * PARAMETERS: info - Evaluation info block, contains: * prefix_node - Prefix or Method/Object Node to execute - * pathname - Name of method to execute, If NULL, the + * relative_path - Name of method to execute, If NULL, the * Node is the object to execute * parameters - List of parameters to pass to the method, * terminated by NULL. Params itself may be @@ -82,10 +82,9 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj, * ******************************************************************************/ -acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) +acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info) { acpi_status status; - struct acpi_namespace_node *node; ACPI_FUNCTION_TRACE(ns_evaluate); @@ -93,83 +92,138 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) return_ACPI_STATUS(AE_BAD_PARAMETER); } - /* Initialize the return value to an invalid object */ - - info->return_object = NULL; - info->param_count = 0; - - if (!info->resolved_node) { + if (!info->node) { /* - * Get the actual namespace node for the target object if we need to. - * Handles these cases: + * Get the actual namespace node for the target object if we + * need to. Handles these cases: * - * 1) Null node, Pathname (absolute path) - * 2) Node, Pathname (path relative to Node) - * 3) Node, Null Pathname + * 1) Null node, valid pathname from root (absolute path) + * 2) Node and valid pathname (path relative to Node) + * 3) Node, Null pathname */ - status = acpi_ns_get_node(info->prefix_node, info->pathname, - ACPI_NS_NO_UPSEARCH, - &info->resolved_node); + status = + acpi_ns_get_node(info->prefix_node, info->relative_pathname, + ACPI_NS_NO_UPSEARCH, &info->node); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* - * For a method alias, we must grab the actual method node so that proper - * scoping context will be established before execution. + * For a method alias, we must grab the actual method node so that + * proper scoping context will be established before execution. */ - if (acpi_ns_get_type(info->resolved_node) == - ACPI_TYPE_LOCAL_METHOD_ALIAS) { - info->resolved_node = + if (acpi_ns_get_type(info->node) == ACPI_TYPE_LOCAL_METHOD_ALIAS) { + info->node = ACPI_CAST_PTR(struct acpi_namespace_node, - info->resolved_node->object); + info->node->object); + } + + /* Complete the info block initialization */ + + info->return_object = NULL; + info->node_flags = info->node->flags; + info->obj_desc = acpi_ns_get_attached_object(info->node); + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s [%p] Value %p\n", + info->relative_pathname, info->node, + acpi_ns_get_attached_object(info->node))); + + /* Get info if we have a predefined name (_HID, etc.) */ + + info->predefined = + acpi_ut_match_predefined_method(info->node->name.ascii); + + /* Get the full pathname to the object, for use in warning messages */ + + info->full_pathname = acpi_ns_get_external_pathname(info->node); + if (!info->full_pathname) { + return_ACPI_STATUS(AE_NO_MEMORY); } - ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s [%p] Value %p\n", info->pathname, - info->resolved_node, - acpi_ns_get_attached_object(info->resolved_node))); + /* Count the number of arguments being passed in */ + + info->param_count = 0; + if (info->parameters) { + while (info->parameters[info->param_count]) { + info->param_count++; + } + + /* Warn on impossible argument count */ + + if (info->param_count > ACPI_METHOD_NUM_ARGS) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + ACPI_WARN_ALWAYS, + "Excess arguments (%u) - using only %u", + info->param_count, + ACPI_METHOD_NUM_ARGS)); + + info->param_count = ACPI_METHOD_NUM_ARGS; + } + } + + /* + * For predefined names: Check that the declared argument count + * matches the ACPI spec -- otherwise this is a BIOS error. + */ + acpi_ns_check_acpi_compliance(info->full_pathname, info->node, + info->predefined); + + /* + * For all names: Check that the incoming argument count for + * this method/object matches the actual ASL/AML definition. + */ + acpi_ns_check_argument_count(info->full_pathname, info->node, + info->param_count, info->predefined); - node = info->resolved_node; + /* For predefined names: Typecheck all incoming arguments */ + + acpi_ns_check_argument_types(info); /* - * Two major cases here: + * Three major evaluation cases: * - * 1) The object is a control method -- execute it - * 2) The object is not a method -- just return it's current value + * 1) Object types that cannot be evaluated by definition + * 2) The object is a control method -- execute it + * 3) The object is not a method -- just return it's current value */ - if (acpi_ns_get_type(info->resolved_node) == ACPI_TYPE_METHOD) { + switch (acpi_ns_get_type(info->node)) { + case ACPI_TYPE_DEVICE: + case ACPI_TYPE_EVENT: + case ACPI_TYPE_MUTEX: + case ACPI_TYPE_REGION: + case ACPI_TYPE_THERMAL: + case ACPI_TYPE_LOCAL_SCOPE: + /* + * 1) Disallow evaluation of certain object types. For these, + * object evaluation is undefined and not supported. + */ + ACPI_ERROR((AE_INFO, + "%s: Evaluation of object type [%s] is not supported", + info->full_pathname, + acpi_ut_get_type_name(info->node->type))); + + status = AE_TYPE; + goto cleanup; + + case ACPI_TYPE_METHOD: /* - * 1) Object is a control method - execute it + * 2) Object is a control method - execute it */ /* Verify that there is a method object associated with this node */ - info->obj_desc = - acpi_ns_get_attached_object(info->resolved_node); if (!info->obj_desc) { ACPI_ERROR((AE_INFO, - "Control method has no attached sub-object")); - return_ACPI_STATUS(AE_NULL_OBJECT); + "%s: Method has no attached sub-object", + info->full_pathname)); + status = AE_NULL_OBJECT; + goto cleanup; } - /* Count the number of arguments being passed to the method */ - - if (info->parameters) { - while (info->parameters[info->param_count]) { - if (info->param_count > ACPI_METHOD_MAX_ARG) { - return_ACPI_STATUS(AE_LIMIT); - } - info->param_count++; - } - } - - - ACPI_DUMP_PATHNAME(info->resolved_node, "ACPI: Execute Method", - ACPI_LV_INFO, _COMPONENT); - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "Method at AML address %p Length %X\n", + "**** Execute method [%s] at AML address %p length %X\n", + info->full_pathname, info->obj_desc->method.aml_start + 1, info->obj_desc->method.aml_length - 1)); @@ -184,81 +238,61 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) acpi_ex_enter_interpreter(); status = acpi_ps_execute_method(info); acpi_ex_exit_interpreter(); - } else { + break; + + default: /* - * 2) Object is not a method, return its current value - * - * Disallow certain object types. For these, "evaluation" is undefined. + * 3) All other non-method objects -- get the current object value */ - switch (info->resolved_node->type) { - case ACPI_TYPE_DEVICE: - case ACPI_TYPE_EVENT: - case ACPI_TYPE_MUTEX: - case ACPI_TYPE_REGION: - case ACPI_TYPE_THERMAL: - case ACPI_TYPE_LOCAL_SCOPE: - - ACPI_ERROR((AE_INFO, - "[%4.4s] Evaluation of object type [%s] is not supported", - info->resolved_node->name.ascii, - acpi_ut_get_type_name(info->resolved_node-> - type))); - - return_ACPI_STATUS(AE_TYPE); - - default: - break; - } /* - * Objects require additional resolution steps (e.g., the Node may be - * a field that must be read, etc.) -- we can't just grab the object - * out of the node. + * Some objects require additional resolution steps (e.g., the Node + * may be a field that must be read, etc.) -- we can't just grab + * the object out of the node. * * Use resolve_node_to_value() to get the associated value. * * NOTE: we can get away with passing in NULL for a walk state because - * resolved_node is guaranteed to not be a reference to either a method + * the Node is guaranteed to not be a reference to either a method * local or a method argument (because this interface is never called * from a running method.) * * Even though we do not directly invoke the interpreter for object - * resolution, we must lock it because we could access an opregion. - * The opregion access code assumes that the interpreter is locked. + * resolution, we must lock it because we could access an op_region. + * The op_region access code assumes that the interpreter is locked. */ acpi_ex_enter_interpreter(); - /* Function has a strange interface */ + /* TBD: resolve_node_to_value has a strange interface, fix */ + + info->return_object = + ACPI_CAST_PTR(union acpi_operand_object, info->node); status = - acpi_ex_resolve_node_to_value(&info->resolved_node, NULL); + acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR + (struct acpi_namespace_node, + &info->return_object), NULL); acpi_ex_exit_interpreter(); - /* - * If acpi_ex_resolve_node_to_value() succeeded, the return value was placed - * in resolved_node. - */ - if (ACPI_SUCCESS(status)) { - status = AE_CTRL_RETURN_VALUE; - info->return_object = - ACPI_CAST_PTR(union acpi_operand_object, - info->resolved_node); - - ACPI_DEBUG_PRINT((ACPI_DB_NAMES, - "Returning object %p [%s]\n", - info->return_object, - acpi_ut_get_object_type_name(info-> - return_object))); + if (ACPI_FAILURE(status)) { + goto cleanup; } + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "Returned object %p [%s]\n", + info->return_object, + acpi_ut_get_object_type_name(info-> + return_object))); + + status = AE_CTRL_RETURN_VALUE; /* Always has a "return value" */ + break; } /* - * Check input argument count against the ASL-defined count for a method. - * Also check predefined names: argument count and return value against - * the ACPI specification. Some incorrect return value types are repaired. + * For predefined names, check the return value against the ACPI + * specification. Some incorrect return value types are repaired. */ - (void)acpi_ns_check_predefined_names(node, info->param_count, - status, &info->return_object); + (void)acpi_ns_check_return_value(info->node, info, info->param_count, + status, &info->return_object); /* Check if there is a return value that must be dealt with */ @@ -278,12 +312,15 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "*** Completed evaluation of object %s ***\n", - info->pathname)); + info->relative_pathname)); + cleanup: /* * Namespace was unlocked by the handling acpi_ns* function, so we - * just return + * just free the pathname and return */ + ACPI_FREE(info->full_pathname); + info->full_pathname = NULL; return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 46f0f83..dd2ceae 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -176,7 +176,7 @@ acpi_status acpi_ns_initialize_devices(void) * part of the ACPI specification. */ info.evaluate_info->prefix_node = acpi_gbl_root_node; - info.evaluate_info->pathname = METHOD_NAME__INI; + info.evaluate_info->relative_pathname = METHOD_NAME__INI; info.evaluate_info->parameters = NULL; info.evaluate_info->flags = ACPI_IGNORE_RETURN_VALUE; @@ -266,28 +266,34 @@ acpi_ns_init_one_object(acpi_handle obj_handle, switch (type) { case ACPI_TYPE_REGION: + info->op_region_count++; break; case ACPI_TYPE_BUFFER_FIELD: + info->field_count++; break; case ACPI_TYPE_LOCAL_BANK_FIELD: + info->field_count++; break; case ACPI_TYPE_BUFFER: + info->buffer_count++; break; case ACPI_TYPE_PACKAGE: + info->package_count++; break; default: /* No init required, just exit now */ + return (AE_OK); } @@ -337,7 +343,9 @@ acpi_ns_init_one_object(acpi_handle obj_handle, break; default: + /* No other types can get here */ + break; } @@ -416,6 +424,7 @@ acpi_ns_find_ini_methods(acpi_handle obj_handle, break; default: + break; } @@ -560,7 +569,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle, ACPI_MEMSET(info, 0, sizeof(struct acpi_evaluate_info)); info->prefix_node = device_node; - info->pathname = METHOD_NAME__INI; + info->relative_pathname = METHOD_NAME__INI; info->parameters = NULL; info->flags = ACPI_IGNORE_RETURN_VALUE; @@ -574,8 +583,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle, /* Ignore error and move on to next device */ - char *scope_name = - acpi_ns_get_external_pathname(info->resolved_node); + char *scope_name = acpi_ns_get_external_pathname(info->node); ACPI_EXCEPTION((AE_INFO, status, "during %s._INI execution", scope_name)); diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 8a52916..24b71a0 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -61,28 +61,29 @@ ACPI_MODULE_NAME("nspredef") * There are several areas that are validated: * * 1) The number of input arguments as defined by the method/object in the - * ASL is validated against the ACPI specification. + * ASL is validated against the ACPI specification. * 2) The type of the return object (if any) is validated against the ACPI - * specification. + * specification. * 3) For returned package objects, the count of package elements is - * validated, as well as the type of each package element. Nested - * packages are supported. + * validated, as well as the type of each package element. Nested + * packages are supported. * * For any problems found, a warning message is issued. * ******************************************************************************/ /* Local prototypes */ static acpi_status -acpi_ns_check_reference(struct acpi_predefined_data *data, +acpi_ns_check_reference(struct acpi_evaluate_info *info, union acpi_operand_object *return_object); static u32 acpi_ns_get_bitmapped_type(union acpi_operand_object *return_object); /******************************************************************************* * - * FUNCTION: acpi_ns_check_predefined_names + * FUNCTION: acpi_ns_check_return_value * * PARAMETERS: node - Namespace node for the method/object + * info - Method execution information block * user_param_count - Number of parameters actually passed * return_status - Status from the object evaluation * return_object_ptr - Pointer to the object returned from the @@ -90,44 +91,25 @@ static u32 acpi_ns_get_bitmapped_type(union acpi_operand_object *return_object); * * RETURN: Status * - * DESCRIPTION: Check an ACPI name for a match in the predefined name list. + * DESCRIPTION: Check the value returned from a predefined name. * ******************************************************************************/ acpi_status -acpi_ns_check_predefined_names(struct acpi_namespace_node *node, - u32 user_param_count, - acpi_status return_status, - union acpi_operand_object **return_object_ptr) +acpi_ns_check_return_value(struct acpi_namespace_node *node, + struct acpi_evaluate_info *info, + u32 user_param_count, + acpi_status return_status, + union acpi_operand_object **return_object_ptr) { - acpi_status status = AE_OK; + acpi_status status; const union acpi_predefined_info *predefined; - char *pathname; - struct acpi_predefined_data *data; - - /* Match the name for this method/object against the predefined list */ - - predefined = acpi_ut_match_predefined_method(node->name.ascii); - - /* Get the full pathname to the object, for use in warning messages */ - - pathname = acpi_ns_get_external_pathname(node); - if (!pathname) { - return (AE_OK); /* Could not get pathname, ignore */ - } - - /* - * Check that the parameter count for this method matches the ASL - * definition. For predefined names, ensure that both the caller and - * the method itself are in accordance with the ACPI specification. - */ - acpi_ns_check_parameter_count(pathname, node, user_param_count, - predefined); /* If not a predefined name, we cannot validate the return object */ + predefined = info->predefined; if (!predefined) { - goto cleanup; + return (AE_OK); } /* @@ -135,7 +117,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, * validate the return object */ if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) { - goto cleanup; + return (AE_OK); } /* @@ -154,25 +136,14 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, if (acpi_gbl_disable_auto_repair || (!predefined->info.expected_btypes) || (predefined->info.expected_btypes == ACPI_RTYPE_ALL)) { - goto cleanup; - } - - /* Create the parameter data block for object validation */ - - data = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_predefined_data)); - if (!data) { - goto cleanup; + return (AE_OK); } - data->predefined = predefined; - data->node = node; - data->node_flags = node->flags; - data->pathname = pathname; /* * Check that the type of the main return object is what is expected * for this predefined name */ - status = acpi_ns_check_object_type(data, return_object_ptr, + status = acpi_ns_check_object_type(info, return_object_ptr, predefined->info.expected_btypes, ACPI_NOT_PACKAGE_ELEMENT); if (ACPI_FAILURE(status)) { @@ -184,10 +155,16 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, * Note: Package may have been newly created by call above. */ if ((*return_object_ptr)->common.type == ACPI_TYPE_PACKAGE) { - data->parent_package = *return_object_ptr; - status = acpi_ns_check_package(data, return_object_ptr); + info->parent_package = *return_object_ptr; + status = acpi_ns_check_package(info, return_object_ptr); if (ACPI_FAILURE(status)) { - goto exit; + + /* We might be able to fix some errors */ + + if ((status != AE_AML_OPERAND_TYPE) && + (status != AE_AML_OPERAND_VALUE)) { + goto exit; + } } } @@ -199,7 +176,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, * performed on a per-name basis, i.e., the code is specific to * particular predefined names. */ - status = acpi_ns_complex_repairs(data, node, status, return_object_ptr); + status = acpi_ns_complex_repairs(info, node, status, return_object_ptr); exit: /* @@ -207,112 +184,18 @@ exit: * or more objects, mark the parent node to suppress further warning * messages during the next evaluation of the same method/object. */ - if (ACPI_FAILURE(status) || (data->flags & ACPI_OBJECT_REPAIRED)) { + if (ACPI_FAILURE(status) || (info->return_flags & ACPI_OBJECT_REPAIRED)) { node->flags |= ANOBJ_EVALUATED; } - ACPI_FREE(data); -cleanup: - ACPI_FREE(pathname); return (status); } /******************************************************************************* * - * FUNCTION: acpi_ns_check_parameter_count - * - * PARAMETERS: pathname - Full pathname to the node (for error msgs) - * node - Namespace node for the method/object - * user_param_count - Number of args passed in by the caller - * predefined - Pointer to entry in predefined name table - * - * RETURN: None - * - * DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a - * predefined name is what is expected (i.e., what is defined in - * the ACPI specification for this predefined name.) - * - ******************************************************************************/ - -void -acpi_ns_check_parameter_count(char *pathname, - struct acpi_namespace_node *node, - u32 user_param_count, - const union acpi_predefined_info *predefined) -{ - u32 param_count; - u32 required_params_current; - u32 required_params_old; - - /* Methods have 0-7 parameters. All other types have zero. */ - - param_count = 0; - if (node->type == ACPI_TYPE_METHOD) { - param_count = node->object->method.param_count; - } - - if (!predefined) { - /* - * Check the parameter count for non-predefined methods/objects. - * - * Warning if too few or too many arguments have been passed by the - * caller. An incorrect number of arguments may not cause the method - * to fail. However, the method will fail if there are too few - * arguments and the method attempts to use one of the missing ones. - */ - if (user_param_count < param_count) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, - ACPI_WARN_ALWAYS, - "Insufficient arguments - needs %u, found %u", - param_count, user_param_count)); - } else if (user_param_count > param_count) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, - ACPI_WARN_ALWAYS, - "Excess arguments - needs %u, found %u", - param_count, user_param_count)); - } - return; - } - - /* - * Validate the user-supplied parameter count. - * Allow two different legal argument counts (_SCP, etc.) - */ - required_params_current = - predefined->info.argument_list & METHOD_ARG_MASK; - required_params_old = - predefined->info.argument_list >> METHOD_ARG_BIT_WIDTH; - - if (user_param_count != ACPI_UINT32_MAX) { - if ((user_param_count != required_params_current) && - (user_param_count != required_params_old)) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, - ACPI_WARN_ALWAYS, - "Parameter count mismatch - " - "caller passed %u, ACPI requires %u", - user_param_count, - required_params_current)); - } - } - - /* - * Check that the ASL-defined parameter count is what is expected for - * this predefined name (parameter count as defined by the ACPI - * specification) - */ - if ((param_count != required_params_current) && - (param_count != required_params_old)) { - ACPI_WARN_PREDEFINED((AE_INFO, pathname, node->flags, - "Parameter count mismatch - ASL declared %u, ACPI requires %u", - param_count, required_params_current)); - } -} - -/******************************************************************************* - * * FUNCTION: acpi_ns_check_object_type * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * expected_btypes - Bitmap of expected return type(s) @@ -328,7 +211,7 @@ acpi_ns_check_parameter_count(char *pathname, ******************************************************************************/ acpi_status -acpi_ns_check_object_type(struct acpi_predefined_data *data, +acpi_ns_check_object_type(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr, u32 expected_btypes, u32 package_index) { @@ -340,7 +223,8 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, if (return_object && ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Invalid return type - Found a Namespace node [%4.4s] type %s", return_object->node.name.ascii, acpi_ut_get_type_name(return_object->node. @@ -356,8 +240,8 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, * from all of the predefined names (including elements of returned * packages) */ - data->return_btype = acpi_ns_get_bitmapped_type(return_object); - if (data->return_btype == ACPI_RTYPE_ANY) { + info->return_btype = acpi_ns_get_bitmapped_type(return_object); + if (info->return_btype == ACPI_RTYPE_ANY) { /* Not one of the supported objects, must be incorrect */ goto type_error_exit; @@ -365,16 +249,18 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, /* For reference objects, check that the reference type is correct */ - if ((data->return_btype & expected_btypes) == ACPI_RTYPE_REFERENCE) { - status = acpi_ns_check_reference(data, return_object); + if ((info->return_btype & expected_btypes) == ACPI_RTYPE_REFERENCE) { + status = acpi_ns_check_reference(info, return_object); return (status); } /* Attempt simple repair of the returned object if necessary */ - status = acpi_ns_simple_repair(data, expected_btypes, + status = acpi_ns_simple_repair(info, expected_btypes, package_index, return_object_ptr); - return (status); + if (ACPI_SUCCESS(status)) { + return (AE_OK); /* Successful repair */ + } type_error_exit: @@ -383,12 +269,14 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, acpi_ut_get_expected_return_types(type_buffer, expected_btypes); if (package_index == ACPI_NOT_PACKAGE_ELEMENT) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Return type mismatch - found %s, expected %s", acpi_ut_get_object_type_name (return_object), type_buffer)); } else { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Return Package type mismatch at index %u - " "found %s, expected %s", package_index, acpi_ut_get_object_type_name @@ -402,7 +290,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_reference * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object - Object returned from the evaluation of a * method or object * @@ -415,7 +303,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data, ******************************************************************************/ static acpi_status -acpi_ns_check_reference(struct acpi_predefined_data *data, +acpi_ns_check_reference(struct acpi_evaluate_info *info, union acpi_operand_object *return_object) { @@ -428,7 +316,7 @@ acpi_ns_check_reference(struct acpi_predefined_data *data, return (AE_OK); } - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, "Return type mismatch - unexpected reference object type [%s] %2.2X", acpi_ut_get_reference_name(return_object), return_object->reference.class)); @@ -462,26 +350,32 @@ static u32 acpi_ns_get_bitmapped_type(union acpi_operand_object *return_object) switch (return_object->common.type) { case ACPI_TYPE_INTEGER: + return_btype = ACPI_RTYPE_INTEGER; break; case ACPI_TYPE_BUFFER: + return_btype = ACPI_RTYPE_BUFFER; break; case ACPI_TYPE_STRING: + return_btype = ACPI_RTYPE_STRING; break; case ACPI_TYPE_PACKAGE: + return_btype = ACPI_RTYPE_PACKAGE; break; case ACPI_TYPE_LOCAL_REFERENCE: + return_btype = ACPI_RTYPE_REFERENCE; break; default: + /* Not one of the supported objects, must be incorrect */ return_btype = ACPI_RTYPE_ANY; diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c index 77cdd53..6d55cef 100644 --- a/drivers/acpi/acpica/nsprepkg.c +++ b/drivers/acpi/acpica/nsprepkg.c @@ -51,12 +51,12 @@ ACPI_MODULE_NAME("nsprepkg") /* Local prototypes */ static acpi_status -acpi_ns_check_package_list(struct acpi_predefined_data *data, +acpi_ns_check_package_list(struct acpi_evaluate_info *info, const union acpi_predefined_info *package, union acpi_operand_object **elements, u32 count); static acpi_status -acpi_ns_check_package_elements(struct acpi_predefined_data *data, +acpi_ns_check_package_elements(struct acpi_evaluate_info *info, union acpi_operand_object **elements, u8 type1, u32 count1, @@ -66,7 +66,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_package * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -78,7 +78,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, ******************************************************************************/ acpi_status -acpi_ns_check_package(struct acpi_predefined_data *data, +acpi_ns_check_package(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -93,18 +93,18 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* The package info for this name is in the next table entry */ - package = data->predefined + 1; + package = info->predefined + 1; ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s Validating return Package of Type %X, Count %X\n", - data->pathname, package->ret_info.type, + info->full_pathname, package->ret_info.type, return_object->package.count)); /* * For variable-length Packages, we can safely remove all embedded * and trailing NULL package elements */ - acpi_ns_remove_null_elements(data, package->ret_info.type, + acpi_ns_remove_null_elements(info, package->ret_info.type, return_object); /* Extract package count and elements array */ @@ -121,7 +121,8 @@ acpi_ns_check_package(struct acpi_predefined_data *data, return (AE_OK); } - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Return Package has no elements (empty)")); return (AE_AML_OPERAND_VALUE); @@ -135,7 +136,6 @@ acpi_ns_check_package(struct acpi_predefined_data *data, */ switch (package->ret_info.type) { case ACPI_PTYPE1_FIXED: - /* * The package count is fixed and there are no sub-packages * @@ -150,13 +150,13 @@ acpi_ns_check_package(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Return Package is larger than needed - " "found %u, expected %u\n", - data->pathname, count, + info->full_pathname, count, expected_count)); } /* Validate all elements of the returned package */ - status = acpi_ns_check_package_elements(data, elements, + status = acpi_ns_check_package_elements(info, elements, package->ret_info. object_type1, package->ret_info. @@ -168,13 +168,12 @@ acpi_ns_check_package(struct acpi_predefined_data *data, break; case ACPI_PTYPE1_VAR: - /* * The package count is variable, there are no sub-packages, and all * elements must be of the same type */ for (i = 0; i < count; i++) { - status = acpi_ns_check_object_type(data, elements, + status = acpi_ns_check_object_type(info, elements, package->ret_info. object_type1, i); if (ACPI_FAILURE(status)) { @@ -185,7 +184,6 @@ acpi_ns_check_package(struct acpi_predefined_data *data, break; case ACPI_PTYPE1_OPTION: - /* * The package count is variable, there are no sub-packages. There are * a fixed number of required elements, and a variable number of @@ -206,7 +204,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* These are the required package elements (0, 1, or 2) */ status = - acpi_ns_check_object_type(data, elements, + acpi_ns_check_object_type(info, elements, package-> ret_info3. object_type[i], @@ -218,7 +216,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* These are the optional package elements */ status = - acpi_ns_check_object_type(data, elements, + acpi_ns_check_object_type(info, elements, package-> ret_info3. tail_object_type, @@ -235,7 +233,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* First element is the (Integer) revision */ - status = acpi_ns_check_object_type(data, elements, + status = acpi_ns_check_object_type(info, elements, ACPI_RTYPE_INTEGER, 0); if (ACPI_FAILURE(status)) { return (status); @@ -247,14 +245,14 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Examine the sub-packages */ status = - acpi_ns_check_package_list(data, package, elements, count); + acpi_ns_check_package_list(info, package, elements, count); break; case ACPI_PTYPE2_PKG_COUNT: /* First element is the (Integer) count of sub-packages to follow */ - status = acpi_ns_check_object_type(data, elements, + status = acpi_ns_check_object_type(info, elements, ACPI_RTYPE_INTEGER, 0); if (ACPI_FAILURE(status)) { return (status); @@ -275,7 +273,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Examine the sub-packages */ status = - acpi_ns_check_package_list(data, package, elements, count); + acpi_ns_check_package_list(info, package, elements, count); break; case ACPI_PTYPE2: @@ -283,7 +281,6 @@ acpi_ns_check_package(struct acpi_predefined_data *data, case ACPI_PTYPE2_MIN: case ACPI_PTYPE2_COUNT: case ACPI_PTYPE2_FIX_VAR: - /* * These types all return a single Package that consists of a * variable number of sub-Packages. @@ -300,7 +297,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Create the new outer package and populate it */ status = - acpi_ns_wrap_with_package(data, return_object, + acpi_ns_wrap_with_package(info, return_object, return_object_ptr); if (ACPI_FAILURE(status)) { return (status); @@ -316,14 +313,15 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Examine the sub-packages */ status = - acpi_ns_check_package_list(data, package, elements, count); + acpi_ns_check_package_list(info, package, elements, count); break; default: /* Should not get here if predefined info table is correct */ - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Invalid internal return type in table entry: %X", package->ret_info.type)); @@ -336,7 +334,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Error exit for the case with an incorrect package count */ - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, "Return Package is too small - found %u elements, expected %u", count, expected_count)); @@ -347,7 +345,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_package_list * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * package - Pointer to package-specific info for method * elements - Element list of parent package. All elements * of this list should be of type Package. @@ -360,7 +358,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data, ******************************************************************************/ static acpi_status -acpi_ns_check_package_list(struct acpi_predefined_data *data, +acpi_ns_check_package_list(struct acpi_evaluate_info *info, const union acpi_predefined_info *package, union acpi_operand_object **elements, u32 count) { @@ -381,11 +379,11 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, for (i = 0; i < count; i++) { sub_package = *elements; sub_elements = sub_package->package.elements; - data->parent_package = sub_package; + info->parent_package = sub_package; /* Each sub-object must be of type Package */ - status = acpi_ns_check_object_type(data, &sub_package, + status = acpi_ns_check_object_type(info, &sub_package, ACPI_RTYPE_PACKAGE, i); if (ACPI_FAILURE(status)) { return (status); @@ -393,7 +391,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* Examine the different types of expected sub-packages */ - data->parent_package = sub_package; + info->parent_package = sub_package; switch (package->ret_info.type) { case ACPI_PTYPE2: case ACPI_PTYPE2_PKG_COUNT: @@ -408,7 +406,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, } status = - acpi_ns_check_package_elements(data, sub_elements, + acpi_ns_check_package_elements(info, sub_elements, package->ret_info. object_type1, package->ret_info. @@ -434,7 +432,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, } status = - acpi_ns_check_package_elements(data, sub_elements, + acpi_ns_check_package_elements(info, sub_elements, package->ret_info. object_type1, package->ret_info. @@ -463,7 +461,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, for (j = 0; j < expected_count; j++) { status = - acpi_ns_check_object_type(data, + acpi_ns_check_object_type(info, &sub_elements[j], package-> ret_info2. @@ -487,7 +485,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* Check the type of each sub-package element */ status = - acpi_ns_check_package_elements(data, sub_elements, + acpi_ns_check_package_elements(info, sub_elements, package->ret_info. object_type1, sub_package->package. @@ -498,12 +496,11 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, break; case ACPI_PTYPE2_COUNT: - /* * First element is the (Integer) count of elements, including * the count field (the ACPI name is num_elements) */ - status = acpi_ns_check_object_type(data, sub_elements, + status = acpi_ns_check_object_type(info, sub_elements, ACPI_RTYPE_INTEGER, 0); if (ACPI_FAILURE(status)) { @@ -537,7 +534,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* Check the type of each sub-package element */ status = - acpi_ns_check_package_elements(data, + acpi_ns_check_package_elements(info, (sub_elements + 1), package->ret_info. object_type1, @@ -562,7 +559,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, /* The sub-package count was smaller than required */ - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, info->node_flags, "Return Sub-Package[%u] is too small - found %u elements, expected %u", i, sub_package->package.count, expected_count)); @@ -573,7 +570,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_check_package_elements * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * elements - Pointer to the package elements array * type1 - Object type for first group * count1 - Count for first group @@ -589,7 +586,7 @@ acpi_ns_check_package_list(struct acpi_predefined_data *data, ******************************************************************************/ static acpi_status -acpi_ns_check_package_elements(struct acpi_predefined_data *data, +acpi_ns_check_package_elements(struct acpi_evaluate_info *info, union acpi_operand_object **elements, u8 type1, u32 count1, @@ -605,7 +602,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, * The second group can have a count of zero. */ for (i = 0; i < count1; i++) { - status = acpi_ns_check_object_type(data, this_element, + status = acpi_ns_check_object_type(info, this_element, type1, i + start_index); if (ACPI_FAILURE(status)) { return (status); @@ -614,7 +611,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data, } for (i = 0; i < count2; i++) { - status = acpi_ns_check_object_type(data, this_element, + status = acpi_ns_check_object_type(info, this_element, type2, (i + count1 + start_index)); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 18f02e4..f8e71ea 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -130,7 +130,7 @@ static const struct acpi_simple_repair_info acpi_object_repair_info[] = { * * FUNCTION: acpi_ns_simple_repair * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * expected_btypes - Object types expected * package_index - Index of object within parent package (if * applicable - ACPI_NOT_PACKAGE_ELEMENT @@ -146,7 +146,7 @@ static const struct acpi_simple_repair_info acpi_object_repair_info[] = { ******************************************************************************/ acpi_status -acpi_ns_simple_repair(struct acpi_predefined_data *data, +acpi_ns_simple_repair(struct acpi_evaluate_info *info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr) @@ -162,12 +162,12 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * Special repairs for certain names that are in the repair table. * Check if this name is in the list of repairable names. */ - predefined = acpi_ns_match_simple_repair(data->node, - data->return_btype, + predefined = acpi_ns_match_simple_repair(info->node, + info->return_btype, package_index); if (predefined) { if (!return_object) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, ACPI_WARN_ALWAYS, "Missing expected return value")); } @@ -191,7 +191,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * Do not perform simple object repair unless the return type is not * expected. */ - if (data->return_btype & expected_btypes) { + if (info->return_btype & expected_btypes) { return (AE_OK); } @@ -211,7 +211,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, */ if (!return_object) { if (expected_btypes && (!(expected_btypes & ACPI_RTYPE_NONE))) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, ACPI_WARN_ALWAYS, "Missing expected return value")); @@ -247,14 +247,14 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * for correct contents (expected object type or types). */ status = - acpi_ns_wrap_with_package(data, return_object, &new_object); + acpi_ns_wrap_with_package(info, return_object, &new_object); if (ACPI_SUCCESS(status)) { /* * The original object just had its reference count * incremented for being inserted into the new package. */ *return_object_ptr = new_object; /* New Package object */ - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } } @@ -277,7 +277,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, * package object as part of the repair, we don't need to * change the reference count. */ - if (!(data->flags & ACPI_OBJECT_WRAPPED)) { + if (!(info->return_flags & ACPI_OBJECT_WRAPPED)) { new_object->common.reference_count = return_object->common.reference_count; @@ -288,14 +288,14 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Converted %s to expected %s at Package index %u\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object), package_index)); } else { ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Converted %s to expected %s\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object))); } @@ -304,7 +304,7 @@ acpi_ns_simple_repair(struct acpi_predefined_data *data, acpi_ut_remove_reference(return_object); *return_object_ptr = new_object; - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -359,7 +359,7 @@ static const struct acpi_simple_repair_info *acpi_ns_match_simple_repair(struct * * FUNCTION: acpi_ns_repair_null_element * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * expected_btypes - Object types expected * package_index - Index of object within parent package (if * applicable - ACPI_NOT_PACKAGE_ELEMENT @@ -374,7 +374,7 @@ static const struct acpi_simple_repair_info *acpi_ns_match_simple_repair(struct ******************************************************************************/ acpi_status -acpi_ns_repair_null_element(struct acpi_predefined_data *data, +acpi_ns_repair_null_element(struct acpi_evaluate_info * info, u32 expected_btypes, u32 package_index, union acpi_operand_object **return_object_ptr) @@ -424,16 +424,16 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, /* Set the reference count according to the parent Package object */ new_object->common.reference_count = - data->parent_package->common.reference_count; + info->parent_package->common.reference_count; ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Converted NULL package element to expected %s at index %u\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(new_object), package_index)); *return_object_ptr = new_object; - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -441,7 +441,7 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_remove_null_elements * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * package_type - An acpi_return_package_types value * obj_desc - A Package object * @@ -454,7 +454,7 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data, *****************************************************************************/ void -acpi_ns_remove_null_elements(struct acpi_predefined_data *data, +acpi_ns_remove_null_elements(struct acpi_evaluate_info *info, u8 package_type, union acpi_operand_object *obj_desc) { @@ -480,6 +480,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, case ACPI_PTYPE2_MIN: case ACPI_PTYPE2_REV_FIXED: case ACPI_PTYPE2_FIX_VAR: + break; default: @@ -511,7 +512,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, if (new_count < count) { ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Found and removed %u NULL elements\n", - data->pathname, (count - new_count))); + info->full_pathname, (count - new_count))); /* NULL terminate list and update the package count */ @@ -524,7 +525,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_wrap_with_package * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * original_object - Pointer to the object to repair. * obj_desc_ptr - The new package object is returned here * @@ -545,7 +546,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, ******************************************************************************/ acpi_status -acpi_ns_wrap_with_package(struct acpi_predefined_data *data, +acpi_ns_wrap_with_package(struct acpi_evaluate_info *info, union acpi_operand_object *original_object, union acpi_operand_object **obj_desc_ptr) { @@ -566,12 +567,12 @@ acpi_ns_wrap_with_package(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Wrapped %s with expected Package object\n", - data->pathname, + info->full_pathname, acpi_ut_get_object_type_name(original_object))); /* Return the new object in the object pointer */ *obj_desc_ptr = pkg_obj_desc; - data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; + info->return_flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; return (AE_OK); } diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 149e9b9..c84603e 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -54,7 +54,7 @@ ACPI_MODULE_NAME("nsrepair2") * be repaired on a per-name basis. */ typedef -acpi_status(*acpi_repair_function) (struct acpi_predefined_data *data, +acpi_status(*acpi_repair_function) (struct acpi_evaluate_info * info, union acpi_operand_object **return_object_ptr); @@ -71,45 +71,57 @@ static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct *node); static acpi_status -acpi_ns_repair_ALR(struct acpi_predefined_data *data, +acpi_ns_repair_ALR(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_CID(struct acpi_predefined_data *data, +acpi_ns_repair_CID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_FDE(struct acpi_predefined_data *data, +acpi_ns_repair_CST(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_HID(struct acpi_predefined_data *data, +acpi_ns_repair_FDE(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_PSS(struct acpi_predefined_data *data, +acpi_ns_repair_HID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_repair_TSS(struct acpi_predefined_data *data, +acpi_ns_repair_PRT(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr); static acpi_status -acpi_ns_check_sorted_list(struct acpi_predefined_data *data, +acpi_ns_repair_PSS(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr); + +static acpi_status +acpi_ns_repair_TSS(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr); + +static acpi_status +acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, union acpi_operand_object *return_object, + u32 start_index, u32 expected_count, u32 sort_index, u8 sort_direction, char *sort_key_name); -static void -acpi_ns_sort_list(union acpi_operand_object **elements, - u32 count, u32 index, u8 sort_direction); - /* Values for sort_direction above */ #define ACPI_SORT_ASCENDING 0 #define ACPI_SORT_DESCENDING 1 +static void +acpi_ns_remove_element(union acpi_operand_object *obj_desc, u32 index); + +static void +acpi_ns_sort_list(union acpi_operand_object **elements, + u32 count, u32 index, u8 sort_direction); + /* * This table contains the names of the predefined methods for which we can * perform more complex repairs. @@ -118,9 +130,11 @@ acpi_ns_sort_list(union acpi_operand_object **elements, * * _ALR: Sort the list ascending by ambient_illuminance * _CID: Strings: uppercase all, remove any leading asterisk + * _CST: Sort the list ascending by C state type * _FDE: Convert Buffer of BYTEs to a Buffer of DWORDs * _GTM: Convert Buffer of BYTEs to a Buffer of DWORDs * _HID: Strings: uppercase all, remove any leading asterisk + * _PRT: Fix reversed source_name and source_index * _PSS: Sort the list descending by Power * _TSS: Sort the list descending by Power * @@ -134,9 +148,11 @@ acpi_ns_sort_list(union acpi_operand_object **elements, static const struct acpi_repair_info acpi_ns_repairable_names[] = { {"_ALR", acpi_ns_repair_ALR}, {"_CID", acpi_ns_repair_CID}, + {"_CST", acpi_ns_repair_CST}, {"_FDE", acpi_ns_repair_FDE}, {"_GTM", acpi_ns_repair_FDE}, /* _GTM has same repair as _FDE */ {"_HID", acpi_ns_repair_HID}, + {"_PRT", acpi_ns_repair_PRT}, {"_PSS", acpi_ns_repair_PSS}, {"_TSS", acpi_ns_repair_TSS}, {{0, 0, 0, 0}, NULL} /* Table terminator */ @@ -150,7 +166,7 @@ static const struct acpi_repair_info acpi_ns_repairable_names[] = { * * FUNCTION: acpi_ns_complex_repairs * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * node - Namespace node for the method/object * validate_status - Original status of earlier validation * return_object_ptr - Pointer to the object returned from the @@ -165,7 +181,7 @@ static const struct acpi_repair_info acpi_ns_repairable_names[] = { *****************************************************************************/ acpi_status -acpi_ns_complex_repairs(struct acpi_predefined_data *data, +acpi_ns_complex_repairs(struct acpi_evaluate_info *info, struct acpi_namespace_node *node, acpi_status validate_status, union acpi_operand_object **return_object_ptr) @@ -180,7 +196,7 @@ acpi_ns_complex_repairs(struct acpi_predefined_data *data, return (validate_status); } - status = predefined->repair_function(data, return_object_ptr); + status = predefined->repair_function(info, return_object_ptr); return (status); } @@ -219,7 +235,7 @@ static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct * * FUNCTION: acpi_ns_repair_ALR * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -231,13 +247,13 @@ static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct *****************************************************************************/ static acpi_status -acpi_ns_repair_ALR(struct acpi_predefined_data *data, +acpi_ns_repair_ALR(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; acpi_status status; - status = acpi_ns_check_sorted_list(data, return_object, 2, 1, + status = acpi_ns_check_sorted_list(info, return_object, 0, 2, 1, ACPI_SORT_ASCENDING, "AmbientIlluminance"); @@ -248,7 +264,7 @@ acpi_ns_repair_ALR(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_FDE * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -262,7 +278,7 @@ acpi_ns_repair_ALR(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_FDE(struct acpi_predefined_data *data, +acpi_ns_repair_FDE(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -285,8 +301,8 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, /* We can only repair if we have exactly 5 BYTEs */ if (return_object->buffer.length != ACPI_FDE_BYTE_BUFFER_SIZE) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, - data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Incorrect return buffer length %u, expected %u", return_object->buffer.length, ACPI_FDE_DWORD_BUFFER_SIZE)); @@ -316,10 +332,11 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s Expanded Byte Buffer to expected DWord Buffer\n", - data->pathname)); + info->full_pathname)); break; default: + return (AE_AML_OPERAND_TYPE); } @@ -328,7 +345,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, acpi_ut_remove_reference(return_object); *return_object_ptr = buffer_object; - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -336,7 +353,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, * * FUNCTION: acpi_ns_repair_CID * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -349,7 +366,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_CID(struct acpi_predefined_data *data, +acpi_ns_repair_CID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { acpi_status status; @@ -362,7 +379,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, /* Check for _CID as a simple string */ if (return_object->common.type == ACPI_TYPE_STRING) { - status = acpi_ns_repair_HID(data, return_object_ptr); + status = acpi_ns_repair_HID(info, return_object_ptr); return (status); } @@ -379,7 +396,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, original_element = *element_ptr; original_ref_count = original_element->common.reference_count; - status = acpi_ns_repair_HID(data, element_ptr); + status = acpi_ns_repair_HID(info, element_ptr); if (ACPI_FAILURE(status)) { return (status); } @@ -404,9 +421,95 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, /****************************************************************************** * + * FUNCTION: acpi_ns_repair_CST + * + * PARAMETERS: info - Method execution information block + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status. AE_OK if object is OK or was repaired successfully + * + * DESCRIPTION: Repair for the _CST object: + * 1. Sort the list ascending by C state type + * 2. Ensure type cannot be zero + * 3. A sub-package count of zero means _CST is meaningless + * 4. Count must match the number of C state sub-packages + * + *****************************************************************************/ + +static acpi_status +acpi_ns_repair_CST(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + union acpi_operand_object **outer_elements; + u32 outer_element_count; + union acpi_operand_object *obj_desc; + acpi_status status; + u8 removing; + u32 i; + + ACPI_FUNCTION_NAME(ns_repair_CST); + + /* + * Check if the C-state type values are proportional. + */ + outer_element_count = return_object->package.count - 1; + i = 0; + while (i < outer_element_count) { + outer_elements = &return_object->package.elements[i + 1]; + removing = FALSE; + + if ((*outer_elements)->package.count == 0) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, + "SubPackage[%u] - removing entry due to zero count", + i)); + removing = TRUE; + goto remove_element; + } + + obj_desc = (*outer_elements)->package.elements[1]; /* Index1 = Type */ + if ((u32)obj_desc->integer.value == 0) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, + "SubPackage[%u] - removing entry due to invalid Type(0)", + i)); + removing = TRUE; + } + + remove_element: + if (removing) { + acpi_ns_remove_element(return_object, i + 1); + outer_element_count--; + } else { + i++; + } + } + + /* Update top-level package count, Type "Integer" checked elsewhere */ + + obj_desc = return_object->package.elements[0]; + obj_desc->integer.value = outer_element_count; + + /* + * Entries (subpackages) in the _CST Package must be sorted by the + * C-state type, in ascending order. + */ + status = acpi_ns_check_sorted_list(info, return_object, 1, 4, 1, + ACPI_SORT_ASCENDING, "C-State Type"); + if (ACPI_FAILURE(status)) { + return (status); + } + + return (AE_OK); +} + +/****************************************************************************** + * * FUNCTION: acpi_ns_repair_HID * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -418,7 +521,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_HID(struct acpi_predefined_data *data, +acpi_ns_repair_HID(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -435,12 +538,13 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, } if (return_object->string.length == 0) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "Invalid zero-length _HID or _CID string")); /* Return AE_OK anyway, let driver handle it */ - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; return (AE_OK); } @@ -464,7 +568,7 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Removed invalid leading asterisk\n", - data->pathname)); + info->full_pathname)); } /* @@ -486,53 +590,69 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data, /****************************************************************************** * - * FUNCTION: acpi_ns_repair_TSS + * FUNCTION: acpi_ns_repair_PRT * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * * RETURN: Status. AE_OK if object is OK or was repaired successfully * - * DESCRIPTION: Repair for the _TSS object. If necessary, sort the object list - * descending by the power dissipation values. + * DESCRIPTION: Repair for the _PRT object. If necessary, fix reversed + * source_name and source_index field, a common BIOS bug. * *****************************************************************************/ static acpi_status -acpi_ns_repair_TSS(struct acpi_predefined_data *data, +acpi_ns_repair_PRT(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { - union acpi_operand_object *return_object = *return_object_ptr; - acpi_status status; - struct acpi_namespace_node *node; + union acpi_operand_object *package_object = *return_object_ptr; + union acpi_operand_object **top_object_list; + union acpi_operand_object **sub_object_list; + union acpi_operand_object *obj_desc; + u32 element_count; + u32 index; - /* - * We can only sort the _TSS return package if there is no _PSS in the - * same scope. This is because if _PSS is present, the ACPI specification - * dictates that the _TSS Power Dissipation field is to be ignored, and - * therefore some BIOSs leave garbage values in the _TSS Power field(s). - * In this case, it is best to just return the _TSS package as-is. - * (May, 2011) - */ - status = - acpi_ns_get_node(data->node, "^_PSS", ACPI_NS_NO_UPSEARCH, &node); - if (ACPI_SUCCESS(status)) { - return (AE_OK); - } + /* Each element in the _PRT package is a subpackage */ - status = acpi_ns_check_sorted_list(data, return_object, 5, 1, - ACPI_SORT_DESCENDING, - "PowerDissipation"); + top_object_list = package_object->package.elements; + element_count = package_object->package.count; - return (status); + for (index = 0; index < element_count; index++) { + sub_object_list = (*top_object_list)->package.elements; + + /* + * If the BIOS has erroneously reversed the _PRT source_name (index 2) + * and the source_index (index 3), fix it. _PRT is important enough to + * workaround this BIOS error. This also provides compatibility with + * other ACPI implementations. + */ + obj_desc = sub_object_list[3]; + if (!obj_desc || (obj_desc->common.type != ACPI_TYPE_INTEGER)) { + sub_object_list[3] = sub_object_list[2]; + sub_object_list[2] = obj_desc; + info->return_flags |= ACPI_OBJECT_REPAIRED; + + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, + "PRT[%X]: Fixed reversed SourceName and SourceIndex", + index)); + } + + /* Point to the next union acpi_operand_object in the top level package */ + + top_object_list++; + } + + return (AE_OK); } /****************************************************************************** * * FUNCTION: acpi_ns_repair_PSS * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object_ptr - Pointer to the object returned from the * evaluation of a method or object * @@ -546,7 +666,7 @@ acpi_ns_repair_TSS(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_repair_PSS(struct acpi_predefined_data *data, +acpi_ns_repair_PSS(struct acpi_evaluate_info *info, union acpi_operand_object **return_object_ptr) { union acpi_operand_object *return_object = *return_object_ptr; @@ -564,7 +684,7 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, * incorrectly sorted, sort it. We sort by cpu_frequency, since this * should be proportional to the power. */ - status = acpi_ns_check_sorted_list(data, return_object, 6, 0, + status = acpi_ns_check_sorted_list(info, return_object, 0, 6, 0, ACPI_SORT_DESCENDING, "CpuFrequency"); if (ACPI_FAILURE(status)) { @@ -584,8 +704,8 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, obj_desc = elements[1]; /* Index1 = power_dissipation */ if ((u32) obj_desc->integer.value > previous_value) { - ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, - data->node_flags, + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + info->node_flags, "SubPackage[%u,%u] - suspicious power dissipation values", i - 1, i)); } @@ -599,10 +719,55 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, /****************************************************************************** * + * FUNCTION: acpi_ns_repair_TSS + * + * PARAMETERS: info - Method execution information block + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status. AE_OK if object is OK or was repaired successfully + * + * DESCRIPTION: Repair for the _TSS object. If necessary, sort the object list + * descending by the power dissipation values. + * + *****************************************************************************/ + +static acpi_status +acpi_ns_repair_TSS(struct acpi_evaluate_info *info, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + acpi_status status; + struct acpi_namespace_node *node; + + /* + * We can only sort the _TSS return package if there is no _PSS in the + * same scope. This is because if _PSS is present, the ACPI specification + * dictates that the _TSS Power Dissipation field is to be ignored, and + * therefore some BIOSs leave garbage values in the _TSS Power field(s). + * In this case, it is best to just return the _TSS package as-is. + * (May, 2011) + */ + status = acpi_ns_get_node(info->node, "^_PSS", + ACPI_NS_NO_UPSEARCH, &node); + if (ACPI_SUCCESS(status)) { + return (AE_OK); + } + + status = acpi_ns_check_sorted_list(info, return_object, 0, 5, 1, + ACPI_SORT_DESCENDING, + "PowerDissipation"); + + return (status); +} + +/****************************************************************************** + * * FUNCTION: acpi_ns_check_sorted_list * - * PARAMETERS: data - Pointer to validation data structure + * PARAMETERS: info - Method execution information block * return_object - Pointer to the top-level returned object + * start_index - Index of the first sub-package * expected_count - Minimum length of each sub-package * sort_index - Sub-package entry to sort on * sort_direction - Ascending or descending @@ -617,8 +782,9 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data, *****************************************************************************/ static acpi_status -acpi_ns_check_sorted_list(struct acpi_predefined_data *data, +acpi_ns_check_sorted_list(struct acpi_evaluate_info *info, union acpi_operand_object *return_object, + u32 start_index, u32 expected_count, u32 sort_index, u8 sort_direction, char *sort_key_name) @@ -643,12 +809,14 @@ acpi_ns_check_sorted_list(struct acpi_predefined_data *data, * Any NULL elements should have been removed by earlier call * to acpi_ns_remove_null_elements. */ - outer_elements = return_object->package.elements; outer_element_count = return_object->package.count; - if (!outer_element_count) { + if (!outer_element_count || start_index >= outer_element_count) { return (AE_AML_PACKAGE_LIMIT); } + outer_elements = &return_object->package.elements[start_index]; + outer_element_count -= start_index; + previous_value = 0; if (sort_direction == ACPI_SORT_DESCENDING) { previous_value = ACPI_UINT32_MAX; @@ -685,15 +853,16 @@ acpi_ns_check_sorted_list(struct acpi_predefined_data *data, (obj_desc->integer.value < previous_value)) || ((sort_direction == ACPI_SORT_DESCENDING) && (obj_desc->integer.value > previous_value))) { - acpi_ns_sort_list(return_object->package.elements, + acpi_ns_sort_list(&return_object->package. + elements[start_index], outer_element_count, sort_index, sort_direction); - data->flags |= ACPI_OBJECT_REPAIRED; + info->return_flags |= ACPI_OBJECT_REPAIRED; ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, "%s: Repaired unsorted list - now sorted by %s\n", - data->pathname, sort_key_name)); + info->full_pathname, sort_key_name)); return (AE_OK); } @@ -752,3 +921,52 @@ acpi_ns_sort_list(union acpi_operand_object **elements, } } } + +/****************************************************************************** + * + * FUNCTION: acpi_ns_remove_element + * + * PARAMETERS: obj_desc - Package object element list + * index - Index of element to remove + * + * RETURN: None + * + * DESCRIPTION: Remove the requested element of a package and delete it. + * + *****************************************************************************/ + +static void +acpi_ns_remove_element(union acpi_operand_object *obj_desc, u32 index) +{ + union acpi_operand_object **source; + union acpi_operand_object **dest; + u32 count; + u32 new_count; + u32 i; + + ACPI_FUNCTION_NAME(ns_remove_element); + + count = obj_desc->package.count; + new_count = count - 1; + + source = obj_desc->package.elements; + dest = source; + + /* Examine all elements of the package object, remove matched index */ + + for (i = 0; i < count; i++) { + if (i == index) { + acpi_ut_remove_reference(*source); /* Remove one ref for being in pkg */ + acpi_ut_remove_reference(*source); + } else { + *dest = *source; + dest++; + } + source++; + } + + /* NULL terminate list and update the package count */ + + *dest = NULL; + obj_desc->package.count = new_count; +} diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index 2808586..08c0b5b 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -419,10 +419,12 @@ acpi_ns_externalize_name(u32 internal_name_length, switch (internal_name[0]) { case AML_ROOT_PREFIX: + prefix_length = 1; break; case AML_PARENT_PREFIX: + for (i = 0; i < internal_name_length; i++) { if (ACPI_IS_PARENT_PREFIX(internal_name[i])) { prefix_length = i + 1; @@ -438,6 +440,7 @@ acpi_ns_externalize_name(u32 internal_name_length, break; default: + break; } diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c index fc69949..f553cfd 100644 --- a/drivers/acpi/acpica/nsxfeval.c +++ b/drivers/acpi/acpica/nsxfeval.c @@ -187,8 +187,6 @@ acpi_evaluate_object(acpi_handle handle, return_ACPI_STATUS(AE_NO_MEMORY); } - info->pathname = pathname; - /* Convert and validate the device handle */ info->prefix_node = acpi_ns_validate_handle(handle); @@ -198,17 +196,64 @@ acpi_evaluate_object(acpi_handle handle, } /* - * If there are parameters to be passed to a control method, the external - * objects must all be converted to internal objects + * Get the actual namespace node for the target object. + * Handles these cases: + * + * 1) Null node, valid pathname from root (absolute path) + * 2) Node and valid pathname (path relative to Node) + * 3) Node, Null pathname + */ + if ((pathname) && (ACPI_IS_ROOT_PREFIX(pathname[0]))) { + + /* The path is fully qualified, just evaluate by name */ + + info->prefix_node = NULL; + } else if (!handle) { + /* + * A handle is optional iff a fully qualified pathname is specified. + * Since we've already handled fully qualified names above, this is + * an error. + */ + if (!pathname) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Both Handle and Pathname are NULL")); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Null Handle with relative pathname [%s]", + pathname)); + } + + status = AE_BAD_PARAMETER; + goto cleanup; + } + + info->relative_pathname = pathname; + + /* + * Convert all external objects passed as arguments to the + * internal version(s). */ if (external_params && external_params->count) { + info->param_count = (u16)external_params->count; + + /* Warn on impossible argument count */ + + if (info->param_count > ACPI_METHOD_NUM_ARGS) { + ACPI_WARN_PREDEFINED((AE_INFO, pathname, + ACPI_WARN_ALWAYS, + "Excess arguments (%u) - using only %u", + info->param_count, + ACPI_METHOD_NUM_ARGS)); + + info->param_count = ACPI_METHOD_NUM_ARGS; + } + /* * Allocate a new parameter block for the internal objects * Add 1 to count to allow for null terminated internal list */ - info->parameters = ACPI_ALLOCATE_ZEROED(((acpi_size) - external_params-> - count + + info->parameters = ACPI_ALLOCATE_ZEROED(((acpi_size) info-> + param_count + 1) * sizeof(void *)); if (!info->parameters) { status = AE_NO_MEMORY; @@ -217,7 +262,7 @@ acpi_evaluate_object(acpi_handle handle, /* Convert each external object in the list to an internal object */ - for (i = 0; i < external_params->count; i++) { + for (i = 0; i < info->param_count; i++) { status = acpi_ut_copy_eobject_to_iobject(&external_params-> pointer[i], @@ -227,43 +272,96 @@ acpi_evaluate_object(acpi_handle handle, goto cleanup; } } - info->parameters[external_params->count] = NULL; + + info->parameters[info->param_count] = NULL; } +#if 0 + /* - * Three major cases: - * 1) Fully qualified pathname - * 2) No handle, not fully qualified pathname (error) - * 3) Valid handle + * Begin incoming argument count analysis. Check for too few args + * and too many args. */ - if ((pathname) && (ACPI_IS_ROOT_PREFIX(pathname[0]))) { - /* The path is fully qualified, just evaluate by name */ + switch (acpi_ns_get_type(info->node)) { + case ACPI_TYPE_METHOD: + + /* Check incoming argument count against the method definition */ + + if (info->obj_desc->method.param_count > info->param_count) { + ACPI_ERROR((AE_INFO, + "Insufficient arguments (%u) - %u are required", + info->param_count, + info->obj_desc->method.param_count)); + + status = AE_MISSING_ARGUMENTS; + goto cleanup; + } + + else if (info->obj_desc->method.param_count < info->param_count) { + ACPI_WARNING((AE_INFO, + "Excess arguments (%u) - only %u are required", + info->param_count, + info->obj_desc->method.param_count)); + + /* Just pass the required number of arguments */ + + info->param_count = info->obj_desc->method.param_count; + } - info->prefix_node = NULL; - status = acpi_ns_evaluate(info); - } else if (!handle) { /* - * A handle is optional iff a fully qualified pathname is specified. - * Since we've already handled fully qualified names above, this is - * an error + * Any incoming external objects to be passed as arguments to the + * method must be converted to internal objects */ - if (!pathname) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Both Handle and Pathname are NULL")); - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Null Handle with relative pathname [%s]", - pathname)); + if (info->param_count) { + /* + * Allocate a new parameter block for the internal objects + * Add 1 to count to allow for null terminated internal list + */ + info->parameters = ACPI_ALLOCATE_ZEROED(((acpi_size) + info-> + param_count + + 1) * + sizeof(void *)); + if (!info->parameters) { + status = AE_NO_MEMORY; + goto cleanup; + } + + /* Convert each external object in the list to an internal object */ + + for (i = 0; i < info->param_count; i++) { + status = + acpi_ut_copy_eobject_to_iobject + (&external_params->pointer[i], + &info->parameters[i]); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + } + + info->parameters[info->param_count] = NULL; } + break; - status = AE_BAD_PARAMETER; - } else { - /* We have a namespace a node and a possible relative path */ + default: + + /* Warn if arguments passed to an object that is not a method */ - status = acpi_ns_evaluate(info); + if (info->param_count) { + ACPI_WARNING((AE_INFO, + "%u arguments were passed to a non-method ACPI object", + info->param_count)); + } + break; } +#endif + + /* Now we can evaluate the object */ + + status = acpi_ns_evaluate(info); + /* * If we are expecting a return value, and all went well above, * copy the return value to an external object. @@ -413,6 +511,7 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info) break; default: + return; } diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 9f25a3d..91a5a69 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -629,24 +629,28 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state switch (opcode) { case AML_BYTE_OP: /* AML_BYTEDATA_ARG */ + buffer_length = ACPI_GET8(parser_state->aml); parser_state->aml += 1; break; case AML_WORD_OP: /* AML_WORDDATA_ARG */ + buffer_length = ACPI_GET16(parser_state->aml); parser_state->aml += 2; break; case AML_DWORD_OP: /* AML_DWORDATA_ARG */ + buffer_length = ACPI_GET32(parser_state->aml); parser_state->aml += 4; break; default: + buffer_length = 0; break; } diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c index 63c4554..065b44a 100644 --- a/drivers/acpi/acpica/psloop.c +++ b/drivers/acpi/acpica/psloop.c @@ -164,7 +164,6 @@ acpi_ps_get_arguments(struct acpi_walk_state *walk_state, case AML_IF_OP: case AML_ELSE_OP: case AML_WHILE_OP: - /* * Currently supported module-level opcodes are: * IF/ELSE/WHILE. These appear to be the most common, @@ -289,6 +288,7 @@ acpi_ps_get_arguments(struct acpi_walk_state *walk_state, default: /* No action for all other opcodes */ + break; } diff --git a/drivers/acpi/acpica/psobject.c b/drivers/acpi/acpica/psobject.c index 12c4028..95dc608 100644 --- a/drivers/acpi/acpica/psobject.c +++ b/drivers/acpi/acpica/psobject.c @@ -402,6 +402,7 @@ acpi_ps_complete_op(struct acpi_walk_state *walk_state, switch (status) { case AE_OK: + break; case AE_CTRL_TRANSFER: diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c index abc4c48..86198a9 100644 --- a/drivers/acpi/acpica/psparse.c +++ b/drivers/acpi/acpica/psparse.c @@ -176,10 +176,10 @@ acpi_ps_complete_this_op(struct acpi_walk_state * walk_state, switch (parent_info->class) { case AML_CLASS_CONTROL: + break; case AML_CLASS_CREATE: - /* * These opcodes contain term_arg operands. The current * op must be replaced by a placeholder return op @@ -192,7 +192,6 @@ acpi_ps_complete_this_op(struct acpi_walk_state * walk_state, break; case AML_CLASS_NAMED_OBJECT: - /* * These opcodes contain term_arg operands. The current * op must be replaced by a placeholder return op diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c index c1934bf..877dc0d 100644 --- a/drivers/acpi/acpica/pstree.c +++ b/drivers/acpi/acpica/pstree.c @@ -308,7 +308,9 @@ union acpi_parse_object *acpi_ps_get_child(union acpi_parse_object *op) break; default: + /* All others have no children */ + break; } diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c index f682542..11b99ab 100644 --- a/drivers/acpi/acpica/psxface.c +++ b/drivers/acpi/acpica/psxface.c @@ -125,7 +125,7 @@ static void acpi_ps_start_trace(struct acpi_evaluate_info *info) } if ((!acpi_gbl_trace_method_name) || - (acpi_gbl_trace_method_name != info->resolved_node->name.integer)) { + (acpi_gbl_trace_method_name != info->node->name.integer)) { goto exit; } @@ -170,7 +170,7 @@ static void acpi_ps_stop_trace(struct acpi_evaluate_info *info) } if ((!acpi_gbl_trace_method_name) || - (acpi_gbl_trace_method_name != info->resolved_node->name.integer)) { + (acpi_gbl_trace_method_name != info->node->name.integer)) { goto exit; } @@ -226,15 +226,14 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) /* Validate the Info and method Node */ - if (!info || !info->resolved_node) { + if (!info || !info->node) { return_ACPI_STATUS(AE_NULL_ENTRY); } /* Init for new method, wait on concurrency semaphore */ status = - acpi_ds_begin_method_execution(info->resolved_node, info->obj_desc, - NULL); + acpi_ds_begin_method_execution(info->node, info->obj_desc, NULL); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -253,8 +252,7 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) */ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Begin Method Parse/Execute [%4.4s] **** Node=%p Obj=%p\n", - info->resolved_node->name.ascii, info->resolved_node, - info->obj_desc)); + info->node->name.ascii, info->node, info->obj_desc)); /* Create and init a Root Node */ @@ -275,7 +273,7 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) goto cleanup; } - status = acpi_ds_init_aml_walk(walk_state, op, info->resolved_node, + status = acpi_ds_init_aml_walk(walk_state, op, info->node, info->obj_desc->method.aml_start, info->obj_desc->method.aml_length, info, info->pass_number); diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 72077fa..b62a0f4 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -352,6 +352,7 @@ acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed) break; default: + break; } @@ -539,6 +540,7 @@ acpi_rs_get_list_length(u8 * aml_buffer, break; default: + break; } @@ -650,8 +652,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, name_found = FALSE; - for (table_index = 0; table_index < 4 && !name_found; - table_index++) { + for (table_index = 0; + table_index < package_element->package.count + && !name_found; table_index++) { if (*sub_object_list && /* Null object allowed */ ((ACPI_TYPE_STRING == (*sub_object_list)->common.type) || diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index f8b55b4..65f3e1c 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -273,17 +273,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, */ user_prt->length = (sizeof(struct acpi_pci_routing_table) - 4); - /* Each element of the top-level package must also be a package */ - - if ((*top_object_list)->common.type != ACPI_TYPE_PACKAGE) { - ACPI_ERROR((AE_INFO, - "(PRT[%u]) Need sub-package, found %s", - index, - acpi_ut_get_object_type_name - (*top_object_list))); - return_ACPI_STATUS(AE_AML_OPERAND_TYPE); - } - /* Each sub-package must be of length 4 */ if ((*top_object_list)->package.count != 4) { @@ -327,22 +316,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, user_prt->pin = (u32) obj_desc->integer.value; /* - * If the BIOS has erroneously reversed the _PRT source_name (index 2) - * and the source_index (index 3), fix it. _PRT is important enough to - * workaround this BIOS error. This also provides compatibility with - * other ACPI implementations. - */ - obj_desc = sub_object_list[3]; - if (!obj_desc || (obj_desc->common.type != ACPI_TYPE_INTEGER)) { - sub_object_list[3] = sub_object_list[2]; - sub_object_list[2] = obj_desc; - - ACPI_WARNING((AE_INFO, - "(PRT[%X].Source) SourceName and SourceIndex are reversed, fixed", - index)); - } - - /* * 3) Third subobject: Dereference the PRT.source_name * The name may be unresolved (slack mode), so allow a null object */ diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c index b5fc0db..8a2d498 100644 --- a/drivers/acpi/acpica/rsdump.c +++ b/drivers/acpi/acpica/rsdump.c @@ -120,17 +120,20 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) /* Strings */ case ACPI_RSD_LITERAL: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table->pointer)); break; case ACPI_RSD_STRING: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, target)); break; /* Data items, 8/16/32/64 bit */ case ACPI_RSD_UINT8: + if (table->pointer) { acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> @@ -142,20 +145,24 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; case ACPI_RSD_UINT16: + acpi_rs_out_integer16(name, ACPI_GET16(target)); break; case ACPI_RSD_UINT32: + acpi_rs_out_integer32(name, ACPI_GET32(target)); break; case ACPI_RSD_UINT64: + acpi_rs_out_integer64(name, ACPI_GET64(target)); break; /* Flags: 1-bit and 2-bit flags supported */ case ACPI_RSD_1BITFLAG: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> pointer[*target & @@ -163,6 +170,7 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; case ACPI_RSD_2BITFLAG: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> pointer[*target & @@ -170,6 +178,7 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; case ACPI_RSD_3BITFLAG: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, table-> pointer[*target & @@ -258,6 +267,7 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) break; default: + acpi_os_printf("**** Invalid table opcode [%X] ****\n", table->opcode); return; diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c index d5bf05a..80d1299 100644 --- a/drivers/acpi/acpica/rsmisc.c +++ b/drivers/acpi/acpica/rsmisc.c @@ -194,7 +194,6 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, break; case ACPI_RSC_COUNT_GPIO_RES: - /* * Vendor data is optional (length/offset may both be zero) * Examine vendor data length field first @@ -410,12 +409,14 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, */ switch (info->resource_offset) { case ACPI_RSC_COMPARE_AML_LENGTH: + if (aml_resource_length != info->value) { goto exit; } break; case ACPI_RSC_COMPARE_VALUE: + if (ACPI_GET8(source) != info->value) { goto exit; } diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index a44953c..480b6b4 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -147,6 +147,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) case ACPI_RSC_MOVE_GPIO_RES: case ACPI_RSC_MOVE_SERIAL_VEN: case ACPI_RSC_MOVE_SERIAL_RES: + ACPI_MEMCPY(destination, source, item_count); return; @@ -157,21 +158,25 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) */ case ACPI_RSC_MOVE16: case ACPI_RSC_MOVE_GPIO_PIN: + ACPI_MOVE_16_TO_16(&ACPI_CAST_PTR(u16, destination)[i], &ACPI_CAST_PTR(u16, source)[i]); break; case ACPI_RSC_MOVE32: + ACPI_MOVE_32_TO_32(&ACPI_CAST_PTR(u32, destination)[i], &ACPI_CAST_PTR(u32, source)[i]); break; case ACPI_RSC_MOVE64: + ACPI_MOVE_64_TO_64(&ACPI_CAST_PTR(u64, destination)[i], &ACPI_CAST_PTR(u64, source)[i]); break; default: + return; } } @@ -736,7 +741,7 @@ acpi_rs_set_srs_method_data(struct acpi_namespace_node *node, } info->prefix_node = node; - info->pathname = METHOD_NAME__SRS; + info->relative_pathname = METHOD_NAME__SRS; info->parameters = args; info->flags = ACPI_IGNORE_RETURN_VALUE; diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c index c0e5d2d..94e3517 100644 --- a/drivers/acpi/acpica/rsxface.c +++ b/drivers/acpi/acpica/rsxface.c @@ -402,6 +402,7 @@ acpi_resource_to_address64(struct acpi_resource *resource, break; default: + return (AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index e57cd38..42a13c0 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -141,8 +141,7 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) ACPI_BIOS_ERROR((AE_INFO, "Table has invalid signature [%4.4s] (0x%8.8X), " "must be SSDT or OEMx", - acpi_ut_valid_acpi_name(*(u32 *)table_desc-> - pointer-> + acpi_ut_valid_acpi_name(table_desc->pointer-> signature) ? table_desc->pointer->signature : "????", *(u32 *)table_desc->pointer->signature)); @@ -471,15 +470,19 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc) } switch (table_desc->flags & ACPI_TABLE_ORIGIN_MASK) { case ACPI_TABLE_ORIGIN_MAPPED: + acpi_os_unmap_memory(table_desc->pointer, table_desc->length); break; + case ACPI_TABLE_ORIGIN_ALLOCATED: + ACPI_FREE(table_desc->pointer); break; /* Not mapped or allocated, there is nothing we can do */ default: + return; } diff --git a/drivers/acpi/acpica/tbprint.c b/drivers/acpi/acpica/tbprint.c new file mode 100644 index 0000000..dc963f8 --- /dev/null +++ b/drivers/acpi/acpica/tbprint.c @@ -0,0 +1,237 @@ +/****************************************************************************** + * + * Module Name: tbprint - Table output utilities + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "actables.h" + +#define _COMPONENT ACPI_TABLES +ACPI_MODULE_NAME("tbprint") + +/* Local prototypes */ +static void acpi_tb_fix_string(char *string, acpi_size length); + +static void +acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, + struct acpi_table_header *header); + +/******************************************************************************* + * + * FUNCTION: acpi_tb_fix_string + * + * PARAMETERS: string - String to be repaired + * length - Maximum length + * + * RETURN: None + * + * DESCRIPTION: Replace every non-printable or non-ascii byte in the string + * with a question mark '?'. + * + ******************************************************************************/ + +static void acpi_tb_fix_string(char *string, acpi_size length) +{ + + while (length && *string) { + if (!ACPI_IS_PRINT(*string)) { + *string = '?'; + } + string++; + length--; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_cleanup_table_header + * + * PARAMETERS: out_header - Where the cleaned header is returned + * header - Input ACPI table header + * + * RETURN: Returns the cleaned header in out_header + * + * DESCRIPTION: Copy the table header and ensure that all "string" fields in + * the header consist of printable characters. + * + ******************************************************************************/ + +static void +acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, + struct acpi_table_header *header) +{ + + ACPI_MEMCPY(out_header, header, sizeof(struct acpi_table_header)); + + acpi_tb_fix_string(out_header->signature, ACPI_NAME_SIZE); + acpi_tb_fix_string(out_header->oem_id, ACPI_OEM_ID_SIZE); + acpi_tb_fix_string(out_header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE); + acpi_tb_fix_string(out_header->asl_compiler_id, ACPI_NAME_SIZE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_print_table_header + * + * PARAMETERS: address - Table physical address + * header - Table header + * + * RETURN: None + * + * DESCRIPTION: Print an ACPI table header. Special cases for FACS and RSDP. + * + ******************************************************************************/ + +void +acpi_tb_print_table_header(acpi_physical_address address, + struct acpi_table_header *header) +{ + struct acpi_table_header local_header; + + /* + * The reason that the Address is cast to a void pointer is so that we + * can use %p which will work properly on both 32-bit and 64-bit hosts. + */ + if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) { + + /* FACS only has signature and length fields */ + + ACPI_INFO((AE_INFO, "%4.4s %p %05X", + header->signature, ACPI_CAST_PTR(void, address), + header->length)); + } else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) { + + /* RSDP has no common fields */ + + ACPI_MEMCPY(local_header.oem_id, + ACPI_CAST_PTR(struct acpi_table_rsdp, + header)->oem_id, ACPI_OEM_ID_SIZE); + acpi_tb_fix_string(local_header.oem_id, ACPI_OEM_ID_SIZE); + + ACPI_INFO((AE_INFO, "RSDP %p %05X (v%.2d %6.6s)", + ACPI_CAST_PTR(void, address), + (ACPI_CAST_PTR(struct acpi_table_rsdp, header)-> + revision > + 0) ? ACPI_CAST_PTR(struct acpi_table_rsdp, + header)->length : 20, + ACPI_CAST_PTR(struct acpi_table_rsdp, + header)->revision, + local_header.oem_id)); + } else { + /* Standard ACPI table with full common header */ + + acpi_tb_cleanup_table_header(&local_header, header); + + ACPI_INFO((AE_INFO, + "%4.4s %p %05X (v%.2d %6.6s %8.8s %08X %4.4s %08X)", + local_header.signature, ACPI_CAST_PTR(void, address), + local_header.length, local_header.revision, + local_header.oem_id, local_header.oem_table_id, + local_header.oem_revision, + local_header.asl_compiler_id, + local_header.asl_compiler_revision)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_validate_checksum + * + * PARAMETERS: table - ACPI table to verify + * length - Length of entire table + * + * RETURN: Status + * + * DESCRIPTION: Verifies that the table checksums to zero. Optionally returns + * exception on bad checksum. + * + ******************************************************************************/ + +acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) +{ + u8 checksum; + + /* Compute the checksum on the table */ + + checksum = acpi_tb_checksum(ACPI_CAST_PTR(u8, table), length); + + /* Checksum ok? (should be zero) */ + + if (checksum) { + ACPI_BIOS_WARNING((AE_INFO, + "Incorrect checksum in table [%4.4s] - 0x%2.2X, " + "should be 0x%2.2X", + table->signature, table->checksum, + (u8)(table->checksum - checksum))); + +#if (ACPI_CHECKSUM_ABORT) + return (AE_BAD_CHECKSUM); +#endif + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_checksum + * + * PARAMETERS: buffer - Pointer to memory region to be checked + * length - Length of this memory region + * + * RETURN: Checksum (u8) + * + * DESCRIPTION: Calculates circular checksum of memory region. + * + ******************************************************************************/ + +u8 acpi_tb_checksum(u8 *buffer, u32 length) +{ + u8 sum = 0; + u8 *end = buffer + length; + + while (buffer < end) { + sum = (u8)(sum + *(buffer++)); + } + + return (sum); +} diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index ce3d5db..bffdfc7 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Module Name: tbutils - table utilities + * Module Name: tbutils - ACPI Table utilities * *****************************************************************************/ @@ -49,12 +49,6 @@ ACPI_MODULE_NAME("tbutils") /* Local prototypes */ -static void acpi_tb_fix_string(char *string, acpi_size length); - -static void -acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, - struct acpi_table_header *header); - static acpi_physical_address acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size); @@ -176,189 +170,6 @@ u8 acpi_tb_tables_loaded(void) /******************************************************************************* * - * FUNCTION: acpi_tb_fix_string - * - * PARAMETERS: string - String to be repaired - * length - Maximum length - * - * RETURN: None - * - * DESCRIPTION: Replace every non-printable or non-ascii byte in the string - * with a question mark '?'. - * - ******************************************************************************/ - -static void acpi_tb_fix_string(char *string, acpi_size length) -{ - - while (length && *string) { - if (!ACPI_IS_PRINT(*string)) { - *string = '?'; - } - string++; - length--; - } -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_cleanup_table_header - * - * PARAMETERS: out_header - Where the cleaned header is returned - * header - Input ACPI table header - * - * RETURN: Returns the cleaned header in out_header - * - * DESCRIPTION: Copy the table header and ensure that all "string" fields in - * the header consist of printable characters. - * - ******************************************************************************/ - -static void -acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, - struct acpi_table_header *header) -{ - - ACPI_MEMCPY(out_header, header, sizeof(struct acpi_table_header)); - - acpi_tb_fix_string(out_header->signature, ACPI_NAME_SIZE); - acpi_tb_fix_string(out_header->oem_id, ACPI_OEM_ID_SIZE); - acpi_tb_fix_string(out_header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE); - acpi_tb_fix_string(out_header->asl_compiler_id, ACPI_NAME_SIZE); -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_print_table_header - * - * PARAMETERS: address - Table physical address - * header - Table header - * - * RETURN: None - * - * DESCRIPTION: Print an ACPI table header. Special cases for FACS and RSDP. - * - ******************************************************************************/ - -void -acpi_tb_print_table_header(acpi_physical_address address, - struct acpi_table_header *header) -{ - struct acpi_table_header local_header; - - /* - * The reason that the Address is cast to a void pointer is so that we - * can use %p which will work properly on both 32-bit and 64-bit hosts. - */ - if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) { - - /* FACS only has signature and length fields */ - - ACPI_INFO((AE_INFO, "%4.4s %p %05X", - header->signature, ACPI_CAST_PTR(void, address), - header->length)); - } else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) { - - /* RSDP has no common fields */ - - ACPI_MEMCPY(local_header.oem_id, - ACPI_CAST_PTR(struct acpi_table_rsdp, - header)->oem_id, ACPI_OEM_ID_SIZE); - acpi_tb_fix_string(local_header.oem_id, ACPI_OEM_ID_SIZE); - - ACPI_INFO((AE_INFO, "RSDP %p %05X (v%.2d %6.6s)", - ACPI_CAST_PTR (void, address), - (ACPI_CAST_PTR(struct acpi_table_rsdp, header)-> - revision > - 0) ? ACPI_CAST_PTR(struct acpi_table_rsdp, - header)->length : 20, - ACPI_CAST_PTR(struct acpi_table_rsdp, - header)->revision, - local_header.oem_id)); - } else { - /* Standard ACPI table with full common header */ - - acpi_tb_cleanup_table_header(&local_header, header); - - ACPI_INFO((AE_INFO, - "%4.4s %p %05X (v%.2d %6.6s %8.8s %08X %4.4s %08X)", - local_header.signature, ACPI_CAST_PTR(void, address), - local_header.length, local_header.revision, - local_header.oem_id, local_header.oem_table_id, - local_header.oem_revision, - local_header.asl_compiler_id, - local_header.asl_compiler_revision)); - - } -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_validate_checksum - * - * PARAMETERS: table - ACPI table to verify - * length - Length of entire table - * - * RETURN: Status - * - * DESCRIPTION: Verifies that the table checksums to zero. Optionally returns - * exception on bad checksum. - * - ******************************************************************************/ - -acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) -{ - u8 checksum; - - /* Compute the checksum on the table */ - - checksum = acpi_tb_checksum(ACPI_CAST_PTR(u8, table), length); - - /* Checksum ok? (should be zero) */ - - if (checksum) { - ACPI_BIOS_WARNING((AE_INFO, - "Incorrect checksum in table [%4.4s] - 0x%2.2X, " - "should be 0x%2.2X", - table->signature, table->checksum, - (u8)(table->checksum - checksum))); - -#if (ACPI_CHECKSUM_ABORT) - - return (AE_BAD_CHECKSUM); -#endif - } - - return (AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_tb_checksum - * - * PARAMETERS: buffer - Pointer to memory region to be checked - * length - Length of this memory region - * - * RETURN: Checksum (u8) - * - * DESCRIPTION: Calculates circular checksum of memory region. - * - ******************************************************************************/ - -u8 acpi_tb_checksum(u8 *buffer, u32 length) -{ - u8 sum = 0; - u8 *end = buffer + length; - - while (buffer < end) { - sum = (u8) (sum + *(buffer++)); - } - - return (sum); -} - -/******************************************************************************* - * * FUNCTION: acpi_tb_check_dsdt_header * * PARAMETERS: None diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c index 67e046e..0ba9e32 100644 --- a/drivers/acpi/acpica/tbxfload.c +++ b/drivers/acpi/acpica/tbxfload.c @@ -53,8 +53,6 @@ ACPI_MODULE_NAME("tbxfload") /* Local prototypes */ static acpi_status acpi_tb_load_namespace(void); -static int no_auto_ssdt; - /******************************************************************************* * * FUNCTION: acpi_load_tables @@ -180,8 +178,16 @@ static acpi_status acpi_tb_load_namespace(void) continue; } - if (no_auto_ssdt) { - printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n"); + /* + * Optionally do not load any SSDTs from the RSDT/XSDT. This can + * be useful for debugging ACPI problems on some machines. + */ + if (acpi_gbl_disable_ssdt_table_load) { + ACPI_INFO((AE_INFO, "Ignoring %4.4s at %p", + acpi_gbl_root_table_list.tables[i].signature. + ascii, ACPI_CAST_PTR(void, + acpi_gbl_root_table_list. + tables[i].address))); continue; } @@ -376,14 +382,3 @@ acpi_status acpi_unload_parent_table(acpi_handle object) } ACPI_EXPORT_SYMBOL(acpi_unload_parent_table) - -static int __init acpi_no_auto_ssdt_setup(char *s) { - - printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n"); - - no_auto_ssdt = 1; - - return 1; -} - -__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup); diff --git a/drivers/acpi/acpica/utbuffer.c b/drivers/acpi/acpica/utbuffer.c new file mode 100644 index 0000000..11fde93 --- /dev/null +++ b/drivers/acpi/acpica/utbuffer.c @@ -0,0 +1,201 @@ +/****************************************************************************** + * + * Module Name: utbuffer - Buffer dump routines + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utbuffer") + +/******************************************************************************* + * + * FUNCTION: acpi_ut_dump_buffer + * + * PARAMETERS: buffer - Buffer to dump + * count - Amount to dump, in bytes + * display - BYTE, WORD, DWORD, or QWORD display: + * DB_BYTE_DISPLAY + * DB_WORD_DISPLAY + * DB_DWORD_DISPLAY + * DB_QWORD_DISPLAY + * base_offset - Beginning buffer offset (display only) + * + * RETURN: None + * + * DESCRIPTION: Generic dump buffer in both hex and ascii. + * + ******************************************************************************/ +void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset) +{ + u32 i = 0; + u32 j; + u32 temp32; + u8 buf_char; + + if (!buffer) { + acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n"); + return; + } + + if ((count < 4) || (count & 0x01)) { + display = DB_BYTE_DISPLAY; + } + + /* Nasty little dump buffer routine! */ + + while (i < count) { + + /* Print current offset */ + + acpi_os_printf("%6.4X: ", (base_offset + i)); + + /* Print 16 hex chars */ + + for (j = 0; j < 16;) { + if (i + j >= count) { + + /* Dump fill spaces */ + + acpi_os_printf("%*s", ((display * 2) + 1), " "); + j += display; + continue; + } + + switch (display) { + case DB_BYTE_DISPLAY: + default: /* Default is BYTE display */ + + acpi_os_printf("%02X ", + buffer[(acpi_size) i + j]); + break; + + case DB_WORD_DISPLAY: + + ACPI_MOVE_16_TO_32(&temp32, + &buffer[(acpi_size) i + j]); + acpi_os_printf("%04X ", temp32); + break; + + case DB_DWORD_DISPLAY: + + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j]); + acpi_os_printf("%08X ", temp32); + break; + + case DB_QWORD_DISPLAY: + + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j]); + acpi_os_printf("%08X", temp32); + + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j + + 4]); + acpi_os_printf("%08X ", temp32); + break; + } + + j += display; + } + + /* + * Print the ASCII equivalent characters but watch out for the bad + * unprintable ones (printable chars are 0x20 through 0x7E) + */ + acpi_os_printf(" "); + for (j = 0; j < 16; j++) { + if (i + j >= count) { + acpi_os_printf("\n"); + return; + } + + buf_char = buffer[(acpi_size) i + j]; + if (ACPI_IS_PRINT(buf_char)) { + acpi_os_printf("%c", buf_char); + } else { + acpi_os_printf("."); + } + } + + /* Done with that line. */ + + acpi_os_printf("\n"); + i += 16; + } + + return; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_debug_dump_buffer + * + * PARAMETERS: buffer - Buffer to dump + * count - Amount to dump, in bytes + * display - BYTE, WORD, DWORD, or QWORD display: + * DB_BYTE_DISPLAY + * DB_WORD_DISPLAY + * DB_DWORD_DISPLAY + * DB_QWORD_DISPLAY + * component_ID - Caller's component ID + * + * RETURN: None + * + * DESCRIPTION: Generic dump buffer in both hex and ascii. + * + ******************************************************************************/ + +void +acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id) +{ + + /* Only dump the buffer if tracing is enabled */ + + if (!((ACPI_LV_TABLES & acpi_dbg_level) && + (component_id & acpi_dbg_layer))) { + return; + } + + acpi_ut_dump_buffer(buffer, count, display, 0); +} diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c index e4c9291..1731c27 100644 --- a/drivers/acpi/acpica/utcopy.c +++ b/drivers/acpi/acpica/utcopy.c @@ -178,7 +178,6 @@ acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object, switch (internal_object->reference.class) { case ACPI_REFCLASS_NAME: - /* * For namepath, return the object handle ("reference") * We are referring to the namespace node @@ -264,7 +263,6 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type, switch (object_type) { case ACPI_COPY_TYPE_SIMPLE: - /* * This is a simple or null object */ @@ -278,7 +276,6 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type, break; case ACPI_COPY_TYPE_PACKAGE: - /* * Build the package object */ @@ -304,6 +301,7 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type, break; default: + return (AE_BAD_PARAMETER); } @@ -481,6 +479,7 @@ acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object, return_ACPI_STATUS(AE_OK); default: + /* All other types are not supported */ ACPI_ERROR((AE_INFO, @@ -544,7 +543,9 @@ acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object, break; default: + /* Other types can't get here */ + break; } @@ -800,7 +801,9 @@ acpi_ut_copy_simple_object(union acpi_operand_object *source_desc, break; default: + /* Nothing to do for other simple objects */ + break; } @@ -868,7 +871,6 @@ acpi_ut_copy_ielement_to_ielement(u8 object_type, break; case ACPI_COPY_TYPE_PACKAGE: - /* * This object is a package - go down another nesting level * Create and build the package object @@ -891,6 +893,7 @@ acpi_ut_copy_ielement_to_ielement(u8 object_type, break; default: + return (AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index c57d9cc..5796e11 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Module Name: utdebug - Debug print routines + * Module Name: utdebug - Debug print/trace routines * *****************************************************************************/ @@ -543,149 +543,3 @@ acpi_ut_ptr_exit(u32 line_number, } #endif - -/******************************************************************************* - * - * FUNCTION: acpi_ut_dump_buffer - * - * PARAMETERS: buffer - Buffer to dump - * count - Amount to dump, in bytes - * display - BYTE, WORD, DWORD, or QWORD display - * offset - Beginning buffer offset (display only) - * - * RETURN: None - * - * DESCRIPTION: Generic dump buffer in both hex and ascii. - * - ******************************************************************************/ - -void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset) -{ - u32 i = 0; - u32 j; - u32 temp32; - u8 buf_char; - - if (!buffer) { - acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n"); - return; - } - - if ((count < 4) || (count & 0x01)) { - display = DB_BYTE_DISPLAY; - } - - /* Nasty little dump buffer routine! */ - - while (i < count) { - - /* Print current offset */ - - acpi_os_printf("%6.4X: ", (base_offset + i)); - - /* Print 16 hex chars */ - - for (j = 0; j < 16;) { - if (i + j >= count) { - - /* Dump fill spaces */ - - acpi_os_printf("%*s", ((display * 2) + 1), " "); - j += display; - continue; - } - - switch (display) { - case DB_BYTE_DISPLAY: - default: /* Default is BYTE display */ - - acpi_os_printf("%02X ", - buffer[(acpi_size) i + j]); - break; - - case DB_WORD_DISPLAY: - - ACPI_MOVE_16_TO_32(&temp32, - &buffer[(acpi_size) i + j]); - acpi_os_printf("%04X ", temp32); - break; - - case DB_DWORD_DISPLAY: - - ACPI_MOVE_32_TO_32(&temp32, - &buffer[(acpi_size) i + j]); - acpi_os_printf("%08X ", temp32); - break; - - case DB_QWORD_DISPLAY: - - ACPI_MOVE_32_TO_32(&temp32, - &buffer[(acpi_size) i + j]); - acpi_os_printf("%08X", temp32); - - ACPI_MOVE_32_TO_32(&temp32, - &buffer[(acpi_size) i + j + - 4]); - acpi_os_printf("%08X ", temp32); - break; - } - - j += display; - } - - /* - * Print the ASCII equivalent characters but watch out for the bad - * unprintable ones (printable chars are 0x20 through 0x7E) - */ - acpi_os_printf(" "); - for (j = 0; j < 16; j++) { - if (i + j >= count) { - acpi_os_printf("\n"); - return; - } - - buf_char = buffer[(acpi_size) i + j]; - if (ACPI_IS_PRINT(buf_char)) { - acpi_os_printf("%c", buf_char); - } else { - acpi_os_printf("."); - } - } - - /* Done with that line. */ - - acpi_os_printf("\n"); - i += 16; - } - - return; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_debug_dump_buffer - * - * PARAMETERS: buffer - Buffer to dump - * count - Amount to dump, in bytes - * display - BYTE, WORD, DWORD, or QWORD display - * component_ID - Caller's component ID - * - * RETURN: None - * - * DESCRIPTION: Generic dump buffer in both hex and ascii. - * - ******************************************************************************/ - -void -acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id) -{ - - /* Only dump the buffer if tracing is enabled */ - - if (!((ACPI_LV_TABLES & acpi_dbg_level) && - (component_id & acpi_dbg_layer))) { - return; - } - - acpi_ut_dump_buffer(buffer, count, display, 0); -} diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c index 29b9302..d6b33f2 100644 --- a/drivers/acpi/acpica/utdelete.c +++ b/drivers/acpi/acpica/utdelete.c @@ -303,6 +303,7 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object) break; default: + break; } @@ -508,7 +509,6 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) case ACPI_TYPE_PROCESSOR: case ACPI_TYPE_POWER: case ACPI_TYPE_THERMAL: - /* * Update the notify objects for these types (if present) * Two lists, system and device notify handlers. @@ -623,6 +623,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) case ACPI_TYPE_REGION: default: + break; /* No subobjects for all other types */ } diff --git a/drivers/acpi/acpica/uterror.c b/drivers/acpi/acpica/uterror.c new file mode 100644 index 0000000..154fdca --- /dev/null +++ b/drivers/acpi/acpica/uterror.c @@ -0,0 +1,289 @@ +/******************************************************************************* + * + * Module Name: uterror - Various internal error/warning output functions + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("uterror") + +/* + * This module contains internal error functions that may + * be configured out. + */ +#if !defined (ACPI_NO_ERROR_MESSAGES) +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_warning + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Warnings for the predefined validation module. Messages are + * only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of error + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_warning(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_WARNING "%s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_info + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Info messages for the predefined validation module. Messages + * are only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_info(const char *module_name, + u32 line_number, + char *pathname, u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_INFO "%s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_bios_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: BIOS error message for predefined names. Messages + * are only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_bios_error(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_BIOS_ERROR "%s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_namespace_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * internal_name - Name or path of the namespace node + * lookup_status - Exception code from NS lookup + * + * RETURN: None + * + * DESCRIPTION: Print error message with the full pathname for the NS node. + * + ******************************************************************************/ + +void +acpi_ut_namespace_error(const char *module_name, + u32 line_number, + const char *internal_name, acpi_status lookup_status) +{ + acpi_status status; + u32 bad_name; + char *name = NULL; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_ERROR); + + if (lookup_status == AE_BAD_CHARACTER) { + + /* There is a non-ascii character in the name */ + + ACPI_MOVE_32_TO_32(&bad_name, + ACPI_CAST_PTR(u32, internal_name)); + acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name); + } else { + /* Convert path to external format */ + + status = acpi_ns_externalize_name(ACPI_UINT32_MAX, + internal_name, NULL, &name); + + /* Print target name */ + + if (ACPI_SUCCESS(status)) { + acpi_os_printf("[%s]", name); + } else { + acpi_os_printf("[COULD NOT EXTERNALIZE NAME]"); + } + + if (name) { + ACPI_FREE(name); + } + } + + acpi_os_printf(" Namespace lookup failure, %s", + acpi_format_exception(lookup_status)); + + ACPI_MSG_SUFFIX; + ACPI_MSG_REDIRECT_END; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_method_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * message - Error message to use on failure + * prefix_node - Prefix relative to the path + * path - Path to the node (optional) + * method_status - Execution status + * + * RETURN: None + * + * DESCRIPTION: Print error message with the full pathname for the method. + * + ******************************************************************************/ + +void +acpi_ut_method_error(const char *module_name, + u32 line_number, + const char *message, + struct acpi_namespace_node *prefix_node, + const char *path, acpi_status method_status) +{ + acpi_status status; + struct acpi_namespace_node *node = prefix_node; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_ERROR); + + if (path) { + status = + acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH, + &node); + if (ACPI_FAILURE(status)) { + acpi_os_printf("[Could not get node by pathname]"); + } + } + + acpi_ns_print_node_pathname(node, message); + acpi_os_printf(", %s", acpi_format_exception(method_status)); + + ACPI_MSG_SUFFIX; + ACPI_MSG_REDIRECT_END; +} + +#endif /* ACPI_NO_ERROR_MESSAGES */ diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index c3f3a7e..ee83adb 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -68,7 +68,7 @@ ACPI_MODULE_NAME("uteval") ******************************************************************************/ acpi_status -acpi_ut_evaluate_object(struct acpi_namespace_node * prefix_node, +acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, char *path, u32 expected_return_btypes, union acpi_operand_object **return_desc) @@ -87,7 +87,7 @@ acpi_ut_evaluate_object(struct acpi_namespace_node * prefix_node, } info->prefix_node = prefix_node; - info->pathname = path; + info->relative_pathname = path; /* Evaluate the object/method */ @@ -123,22 +123,27 @@ acpi_ut_evaluate_object(struct acpi_namespace_node * prefix_node, switch ((info->return_object)->common.type) { case ACPI_TYPE_INTEGER: + return_btype = ACPI_BTYPE_INTEGER; break; case ACPI_TYPE_BUFFER: + return_btype = ACPI_BTYPE_BUFFER; break; case ACPI_TYPE_STRING: + return_btype = ACPI_BTYPE_STRING; break; case ACPI_TYPE_PACKAGE: + return_btype = ACPI_BTYPE_PACKAGE; break; default: + return_btype = 0; break; } diff --git a/drivers/acpi/acpica/utexcep.c b/drivers/acpi/acpica/utexcep.c index b543a14..ff6d9e8 100644 --- a/drivers/acpi/acpica/utexcep.c +++ b/drivers/acpi/acpica/utexcep.c @@ -146,6 +146,7 @@ const struct acpi_exception_info *acpi_ut_validate_exception(acpi_status status) break; default: + break; } diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c index 43a170a..fa69071 100644 --- a/drivers/acpi/acpica/utids.c +++ b/drivers/acpi/acpica/utids.c @@ -341,14 +341,17 @@ acpi_ut_execute_CID(struct acpi_namespace_node *device_node, switch (cid_objects[i]->common.type) { case ACPI_TYPE_INTEGER: + string_area_size += ACPI_EISAID_STRING_SIZE; break; case ACPI_TYPE_STRING: + string_area_size += cid_objects[i]->string.length + 1; break; default: + status = AE_TYPE; goto cleanup; } diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index 785fdd0..02f9101 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -382,10 +382,12 @@ acpi_ut_display_init_pathname(u8 type, switch (type) { case ACPI_TYPE_METHOD: + acpi_os_printf("Executing "); break; default: + acpi_os_printf("Initializing "); break; } diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c index 1099f5c..aa61f66 100644 --- a/drivers/acpi/acpica/utobject.c +++ b/drivers/acpi/acpica/utobject.c @@ -129,6 +129,7 @@ union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char break; default: + /* All others have no secondary object */ break; } @@ -353,6 +354,7 @@ u8 acpi_ut_valid_internal_object(void *object) return (TRUE); default: + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%p is not not an ACPI operand obj [%s]\n", object, acpi_ut_get_descriptor_name(object))); @@ -509,7 +511,6 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, switch (internal_object->reference.class) { case ACPI_REFCLASS_NAME: - /* * Get the actual length of the full pathname to this object. * The reference will be converted to the pathname to the object @@ -525,7 +526,6 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, break; default: - /* * No other reference opcodes are supported. * Notably, Locals and Args are not supported, but this may be @@ -585,7 +585,6 @@ acpi_ut_get_element_length(u8 object_type, switch (object_type) { case ACPI_COPY_TYPE_SIMPLE: - /* * Simple object - just get the size (Null object/entry is handled * here also) and sum it into the running package length diff --git a/drivers/acpi/acpica/utpredef.c b/drivers/acpi/acpica/utpredef.c index 2945947..2b1ce4c 100644 --- a/drivers/acpi/acpica/utpredef.c +++ b/drivers/acpi/acpica/utpredef.c @@ -147,6 +147,11 @@ void acpi_ut_get_expected_return_types(char *buffer, u32 expected_btypes) u32 i; u32 j; + if (!expected_btypes) { + ACPI_STRCPY(buffer, "NONE"); + return; + } + j = 1; buffer[0] = 0; this_rtype = ACPI_RTYPE_INTEGER; @@ -328,9 +333,7 @@ static u32 acpi_ut_get_argument_types(char *buffer, u16 argument_types) /* First field in the types list is the count of args to follow */ - arg_count = (argument_types & METHOD_ARG_MASK); - argument_types >>= METHOD_ARG_BIT_WIDTH; - + arg_count = METHOD_GET_ARG_COUNT(argument_types); if (arg_count > METHOD_PREDEF_ARGS_MAX) { printf("**** Invalid argument count (%u) " "in predefined info structure\n", arg_count); @@ -340,7 +343,8 @@ static u32 acpi_ut_get_argument_types(char *buffer, u16 argument_types) /* Get each argument from the list, convert to ascii, store to buffer */ for (i = 0; i < arg_count; i++) { - this_argument_type = (argument_types & METHOD_ARG_MASK); + this_argument_type = METHOD_GET_NEXT_TYPE(argument_types); + if (!this_argument_type || (this_argument_type > METHOD_MAX_ARG_TYPE)) { printf("**** Invalid argument type (%u) " @@ -351,10 +355,6 @@ static u32 acpi_ut_get_argument_types(char *buffer, u16 argument_types) strcat(buffer, ut_external_type_names[this_argument_type] + sub_index); - - /* Shift to next argument type field */ - - argument_types >>= METHOD_ARG_BIT_WIDTH; sub_index = 0; } diff --git a/drivers/acpi/acpica/utstring.c b/drivers/acpi/acpica/utstring.c index b3e36a8..c53759b 100644 --- a/drivers/acpi/acpica/utstring.c +++ b/drivers/acpi/acpica/utstring.c @@ -186,10 +186,13 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer) switch (base) { case ACPI_ANY_BASE: case 16: + break; default: + /* Invalid Base */ + return_ACPI_STATUS(AE_BAD_PARAMETER); } @@ -355,36 +358,44 @@ void acpi_ut_print_string(char *string, u8 max_length) switch (string[i]) { case 0x07: + acpi_os_printf("\\a"); /* BELL */ break; case 0x08: + acpi_os_printf("\\b"); /* BACKSPACE */ break; case 0x0C: + acpi_os_printf("\\f"); /* FORMFEED */ break; case 0x0A: + acpi_os_printf("\\n"); /* LINEFEED */ break; case 0x0D: + acpi_os_printf("\\r"); /* CARRIAGE RETURN */ break; case 0x09: + acpi_os_printf("\\t"); /* HORIZONTAL TAB */ break; case 0x0B: + acpi_os_printf("\\v"); /* VERTICAL TAB */ break; case '\'': /* Single Quote */ case '\"': /* Double Quote */ case '\\': /* Backslash */ + acpi_os_printf("\\%c", (int)string[i]); break; @@ -451,7 +462,8 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position) * * FUNCTION: acpi_ut_valid_acpi_name * - * PARAMETERS: name - The name to be examined + * PARAMETERS: name - The name to be examined. Does not have to + * be NULL terminated string. * * RETURN: TRUE if the name is valid, FALSE otherwise * @@ -462,15 +474,14 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position) * ******************************************************************************/ -u8 acpi_ut_valid_acpi_name(u32 name) +u8 acpi_ut_valid_acpi_name(char *name) { u32 i; ACPI_FUNCTION_ENTRY(); for (i = 0; i < ACPI_NAME_SIZE; i++) { - if (!acpi_ut_valid_acpi_char - ((ACPI_CAST_PTR(char, &name))[i], i)) { + if (!acpi_ut_valid_acpi_char(name[i], i)) { return (FALSE); } } diff --git a/drivers/acpi/acpica/uttrack.c b/drivers/acpi/acpica/uttrack.c index 62774c7..160f13f 100644 --- a/drivers/acpi/acpica/uttrack.c +++ b/drivers/acpi/acpica/uttrack.c @@ -603,6 +603,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) switch (ACPI_GET_DESCRIPTOR_TYPE (descriptor)) { case ACPI_DESC_TYPE_OPERAND: + if (element->size == sizeof(union acpi_operand_object)) @@ -613,6 +614,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_PARSER: + if (element->size == sizeof(union acpi_parse_object)) { @@ -622,6 +624,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_NAMED: + if (element->size == sizeof(struct acpi_namespace_node)) @@ -632,6 +635,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; default: + break; } @@ -639,6 +643,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) switch (descriptor_type) { case ACPI_DESC_TYPE_OPERAND: + acpi_os_printf ("%12.12s RefCount 0x%04X\n", acpi_ut_get_type_name @@ -649,6 +654,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_PARSER: + acpi_os_printf ("AmlOpcode 0x%04hX\n", descriptor->op.asl. @@ -656,6 +662,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; case ACPI_DESC_TYPE_NAMED: + acpi_os_printf("%4.4s\n", acpi_ut_get_node_name (&descriptor-> @@ -663,6 +670,7 @@ void acpi_ut_dump_allocations(u32 component, const char *module) break; default: + acpi_os_printf("\n"); break; } diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c index 976b6c7..e966a2e 100644 --- a/drivers/acpi/acpica/utxferror.c +++ b/drivers/acpi/acpica/utxferror.c @@ -44,7 +44,6 @@ #include <linux/export.h> #include <acpi/acpi.h> #include "accommon.h" -#include "acnamesp.h" #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utxferror") @@ -52,43 +51,7 @@ ACPI_MODULE_NAME("utxferror") /* * This module is used for the in-kernel ACPICA as well as the ACPICA * tools/applications. - * - * For the iASL compiler case, the output is redirected to stderr so that - * any of the various ACPI errors and warnings do not appear in the output - * files, for either the compiler or disassembler portions of the tool. */ -#ifdef ACPI_ASL_COMPILER -#include <stdio.h> -extern FILE *acpi_gbl_output_file; - -#define ACPI_MSG_REDIRECT_BEGIN \ - FILE *output_file = acpi_gbl_output_file; \ - acpi_os_redirect_output (stderr); - -#define ACPI_MSG_REDIRECT_END \ - acpi_os_redirect_output (output_file); - -#else -/* - * non-iASL case - no redirection, nothing to do - */ -#define ACPI_MSG_REDIRECT_BEGIN -#define ACPI_MSG_REDIRECT_END -#endif -/* - * Common message prefixes - */ -#define ACPI_MSG_ERROR "ACPI Error: " -#define ACPI_MSG_EXCEPTION "ACPI Exception: " -#define ACPI_MSG_WARNING "ACPI Warning: " -#define ACPI_MSG_INFO "ACPI: " -#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Bug: Error: " -#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Bug: Warning: " -/* - * Common message suffix - */ -#define ACPI_MSG_SUFFIX \ - acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) /******************************************************************************* * * FUNCTION: acpi_error @@ -285,200 +248,3 @@ acpi_bios_warning(const char *module_name, } ACPI_EXPORT_SYMBOL(acpi_bios_warning) - -/* - * The remainder of this module contains internal error functions that may - * be configured out. - */ -#if !defined (ACPI_NO_ERROR_MESSAGES) && !defined (ACPI_BIN_APP) -/******************************************************************************* - * - * FUNCTION: acpi_ut_predefined_warning - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * pathname - Full pathname to the node - * node_flags - From Namespace node for the method/object - * format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: Warnings for the predefined validation module. Messages are - * only emitted the first time a problem with a particular - * method/object is detected. This prevents a flood of error - * messages for methods that are repeatedly evaluated. - * - ******************************************************************************/ -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_warning(const char *module_name, - u32 line_number, - char *pathname, - u8 node_flags, const char *format, ...) -{ - va_list arg_list; - - /* - * Warning messages for this method/object will be disabled after the - * first time a validation fails or an object is successfully repaired. - */ - if (node_flags & ANOBJ_EVALUATED) { - return; - } - - acpi_os_printf(ACPI_MSG_WARNING "For %s: ", pathname); - - va_start(arg_list, format); - acpi_os_vprintf(format, arg_list); - ACPI_MSG_SUFFIX; - va_end(arg_list); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_predefined_info - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * pathname - Full pathname to the node - * node_flags - From Namespace node for the method/object - * format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: Info messages for the predefined validation module. Messages - * are only emitted the first time a problem with a particular - * method/object is detected. This prevents a flood of - * messages for methods that are repeatedly evaluated. - * - ******************************************************************************/ - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_info(const char *module_name, - u32 line_number, - char *pathname, u8 node_flags, const char *format, ...) -{ - va_list arg_list; - - /* - * Warning messages for this method/object will be disabled after the - * first time a validation fails or an object is successfully repaired. - */ - if (node_flags & ANOBJ_EVALUATED) { - return; - } - - acpi_os_printf(ACPI_MSG_INFO "For %s: ", pathname); - - va_start(arg_list, format); - acpi_os_vprintf(format, arg_list); - ACPI_MSG_SUFFIX; - va_end(arg_list); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_namespace_error - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * internal_name - Name or path of the namespace node - * lookup_status - Exception code from NS lookup - * - * RETURN: None - * - * DESCRIPTION: Print error message with the full pathname for the NS node. - * - ******************************************************************************/ - -void -acpi_ut_namespace_error(const char *module_name, - u32 line_number, - const char *internal_name, acpi_status lookup_status) -{ - acpi_status status; - u32 bad_name; - char *name = NULL; - - ACPI_MSG_REDIRECT_BEGIN; - acpi_os_printf(ACPI_MSG_ERROR); - - if (lookup_status == AE_BAD_CHARACTER) { - - /* There is a non-ascii character in the name */ - - ACPI_MOVE_32_TO_32(&bad_name, - ACPI_CAST_PTR(u32, internal_name)); - acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name); - } else { - /* Convert path to external format */ - - status = acpi_ns_externalize_name(ACPI_UINT32_MAX, - internal_name, NULL, &name); - - /* Print target name */ - - if (ACPI_SUCCESS(status)) { - acpi_os_printf("[%s]", name); - } else { - acpi_os_printf("[COULD NOT EXTERNALIZE NAME]"); - } - - if (name) { - ACPI_FREE(name); - } - } - - acpi_os_printf(" Namespace lookup failure, %s", - acpi_format_exception(lookup_status)); - - ACPI_MSG_SUFFIX; - ACPI_MSG_REDIRECT_END; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_method_error - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * message - Error message to use on failure - * prefix_node - Prefix relative to the path - * path - Path to the node (optional) - * method_status - Execution status - * - * RETURN: None - * - * DESCRIPTION: Print error message with the full pathname for the method. - * - ******************************************************************************/ - -void -acpi_ut_method_error(const char *module_name, - u32 line_number, - const char *message, - struct acpi_namespace_node *prefix_node, - const char *path, acpi_status method_status) -{ - acpi_status status; - struct acpi_namespace_node *node = prefix_node; - - ACPI_MSG_REDIRECT_BEGIN; - acpi_os_printf(ACPI_MSG_ERROR); - - if (path) { - status = - acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH, - &node); - if (ACPI_FAILURE(status)) { - acpi_os_printf("[Could not get node by pathname]"); - } - } - - acpi_ns_print_node_pathname(node, message); - acpi_os_printf(", %s", acpi_format_exception(method_status)); - - ACPI_MSG_SUFFIX; - ACPI_MSG_REDIRECT_END; -} - -#endif /* ACPI_NO_ERROR_MESSAGES */ diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index e710045..082b4dd 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -425,7 +425,7 @@ static int acpi_battery_get_info(struct acpi_battery *battery) { int result = -EFAULT; acpi_status status = 0; - char *name = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags)? + char *name = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags) ? "_BIX" : "_BIF"; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -661,11 +661,11 @@ static void find_battery(const struct dmi_header *dm, void *private) static void acpi_battery_quirks(struct acpi_battery *battery) { if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) - return ; + return; - if (battery->full_charge_capacity == 100 && - battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && - battery->capacity_now >=0 && battery->capacity_now <= 100) { + if (battery->full_charge_capacity == 100 && + battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && + battery->capacity_now >= 0 && battery->capacity_now <= 100) { set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags); battery->full_charge_capacity = battery->design_capacity; battery->capacity_now = (battery->capacity_now * @@ -673,7 +673,7 @@ static void acpi_battery_quirks(struct acpi_battery *battery) } if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags)) - return ; + return; if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { const char *s; @@ -761,7 +761,7 @@ static int acpi_battery_print_info(struct seq_file *seq, int result) goto end; seq_printf(seq, "present: %s\n", - acpi_battery_present(battery)?"yes":"no"); + acpi_battery_present(battery) ? "yes" : "no"); if (!acpi_battery_present(battery)) goto end; if (battery->design_capacity == ACPI_BATTERY_VALUE_UNKNOWN) @@ -817,12 +817,12 @@ static int acpi_battery_print_state(struct seq_file *seq, int result) goto end; seq_printf(seq, "present: %s\n", - acpi_battery_present(battery)?"yes":"no"); + acpi_battery_present(battery) ? "yes" : "no"); if (!acpi_battery_present(battery)) goto end; seq_printf(seq, "capacity state: %s\n", - (battery->state & 0x04)?"critical":"ok"); + (battery->state & 0x04) ? "critical" : "ok"); if ((battery->state & 0x01) && (battery->state & 0x02)) seq_printf(seq, "charging state: charging/discharging\n"); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 292de3c..a5bb33b 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -91,8 +91,7 @@ static struct dmi_system_id dsdt_dmi_table[] __initdata = { int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device) { - acpi_status status = AE_OK; - + acpi_status status; if (!device) return -EINVAL; @@ -162,7 +161,7 @@ EXPORT_SYMBOL(acpi_bus_private_data_handler); int acpi_bus_get_private_data(acpi_handle handle, void **data) { - acpi_status status = AE_OK; + acpi_status status; if (!*data) return -EINVAL; @@ -361,7 +360,7 @@ extern int event_is_open; int acpi_bus_generate_proc_event4(const char *device_class, const char *bus_id, u8 type, int data) { struct acpi_bus_event *event; - unsigned long flags = 0; + unsigned long flags; /* drop event on the floor if no one's listening */ if (!event_is_open) @@ -400,7 +399,7 @@ EXPORT_SYMBOL(acpi_bus_generate_proc_event); int acpi_bus_receive_event(struct acpi_bus_event *event) { - unsigned long flags = 0; + unsigned long flags; struct acpi_bus_event *entry = NULL; DECLARE_WAITQUEUE(wait, current); @@ -593,7 +592,7 @@ static void acpi_bus_notify(acpi_handle handle, u32 type, void *data) static int __init acpi_bus_init_irq(void) { - acpi_status status = AE_OK; + acpi_status status; union acpi_object arg = { ACPI_TYPE_INTEGER }; struct acpi_object_list arg_list = { 1, &arg }; char *message = NULL; @@ -640,7 +639,7 @@ u8 acpi_gbl_permanent_mmap; void __init acpi_early_init(void) { - acpi_status status = AE_OK; + acpi_status status; if (acpi_disabled) return; @@ -714,8 +713,8 @@ void __init acpi_early_init(void) static int __init acpi_bus_init(void) { - int result = 0; - acpi_status status = AE_OK; + int result; + acpi_status status; extern acpi_status acpi_os_initialize1(void); acpi_os_initialize1(); diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 31c217a..e9e8bb2 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -419,62 +419,73 @@ bool acpi_bus_can_wakeup(acpi_handle handle) EXPORT_SYMBOL(acpi_bus_can_wakeup); /** - * acpi_device_power_state - Get preferred power state of ACPI device. + * acpi_dev_pm_get_state - Get preferred power state of ACPI device. * @dev: Device whose preferred target power state to return. * @adev: ACPI device node corresponding to @dev. * @target_state: System state to match the resultant device state. - * @d_max_in: Deepest low-power state to take into consideration. - * @d_min_p: Location to store the upper limit of the allowed states range. - * Return value: Preferred power state of the device on success, -ENODEV - * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure + * @d_min_p: Location to store the highest power state available to the device. + * @d_max_p: Location to store the lowest power state available to the device. * - * Find the lowest power (highest number) ACPI device power state that the - * device can be in while the system is in the state represented by - * @target_state. If @d_min_p is set, the highest power (lowest number) device - * power state that @dev can be in for the given system sleep state is stored - * at the location pointed to by it. + * Find the lowest power (highest number) and highest power (lowest number) ACPI + * device power states that the device can be in while the system is in the + * state represented by @target_state. Store the integer numbers representing + * those stats in the memory locations pointed to by @d_max_p and @d_min_p, + * respectively. * * Callers must ensure that @dev and @adev are valid pointers and that @adev * actually corresponds to @dev before using this function. + * + * Returns 0 on success or -ENODATA when one of the ACPI methods fails or + * returns a value that doesn't make sense. The memory locations pointed to by + * @d_max_p and @d_min_p are only modified on success. */ -int acpi_device_power_state(struct device *dev, struct acpi_device *adev, - u32 target_state, int d_max_in, int *d_min_p) +static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev, + u32 target_state, int *d_min_p, int *d_max_p) { - char acpi_method[] = "_SxD"; - unsigned long long d_min, d_max; + char method[] = { '_', 'S', '0' + target_state, 'D', '\0' }; + acpi_handle handle = adev->handle; + unsigned long long ret; + int d_min, d_max; bool wakeup = false; + acpi_status status; - if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3) - return -EINVAL; - - if (d_max_in > ACPI_STATE_D3_HOT) { - enum pm_qos_flags_status stat; - - stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); - if (stat == PM_QOS_FLAGS_ALL) - d_max_in = ACPI_STATE_D3_HOT; - } - - acpi_method[2] = '0' + target_state; /* - * If the sleep state is S0, the lowest limit from ACPI is D3, - * but if the device has _S0W, we will use the value from _S0W - * as the lowest limit from ACPI. Finally, we will constrain - * the lowest limit with the specified one. + * If the system state is S0, the lowest power state the device can be + * in is D3cold, unless the device has _S0W and is supposed to signal + * wakeup, in which case the return value of _S0W has to be used as the + * lowest power state available to the device. */ d_min = ACPI_STATE_D0; - d_max = ACPI_STATE_D3; + d_max = ACPI_STATE_D3_COLD; /* * If present, _SxD methods return the minimum D-state (highest power * state) we can use for the corresponding S-states. Otherwise, the * minimum D-state is D0 (ACPI 3.x). - * - * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer - * provided -- that's our fault recovery, we ignore retval. */ if (target_state > ACPI_STATE_S0) { - acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min); + /* + * We rely on acpi_evaluate_integer() not clobbering the integer + * provided if AE_NOT_FOUND is returned. + */ + ret = d_min; + status = acpi_evaluate_integer(handle, method, NULL, &ret); + if ((ACPI_FAILURE(status) && status != AE_NOT_FOUND) + || ret > ACPI_STATE_D3_COLD) + return -ENODATA; + + /* + * We need to handle legacy systems where D3hot and D3cold are + * the same and 3 is returned in both cases, so fall back to + * D3cold if D3hot is not a valid state. + */ + if (!adev->power.states[ret].flags.valid) { + if (ret == ACPI_STATE_D3_HOT) + ret = ACPI_STATE_D3_COLD; + else + return -ENODATA; + } + d_min = ret; wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid && adev->wakeup.sleep_state >= target_state; } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) != @@ -490,38 +501,30 @@ int acpi_device_power_state(struct device *dev, struct acpi_device *adev, * can wake the system. _S0W may be valid, too. */ if (wakeup) { - acpi_status status; - - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(adev->handle, acpi_method, NULL, - &d_max); - if (ACPI_FAILURE(status)) { - if (target_state != ACPI_STATE_S0 || - status != AE_NOT_FOUND) + method[3] = 'W'; + status = acpi_evaluate_integer(handle, method, NULL, &ret); + if (status == AE_NOT_FOUND) { + if (target_state > ACPI_STATE_S0) d_max = d_min; - } else if (d_max < d_min) { - /* Warn the user of the broken DSDT */ - printk(KERN_WARNING "ACPI: Wrong value from %s\n", - acpi_method); - /* Sanitize it */ - d_min = d_max; + } else if (ACPI_SUCCESS(status) && ret <= ACPI_STATE_D3_COLD) { + /* Fall back to D3cold if ret is not a valid state. */ + if (!adev->power.states[ret].flags.valid) + ret = ACPI_STATE_D3_COLD; + + d_max = ret > d_min ? ret : d_min; + } else { + return -ENODATA; } } - if (d_max_in < d_min) - return -EINVAL; if (d_min_p) *d_min_p = d_min; - /* constrain d_max with specified lowest limit (max number) */ - if (d_max > d_max_in) { - for (d_max = d_max_in; d_max > d_min; d_max--) { - if (adev->power.states[d_max].flags.valid) - break; - } - } - return d_max; + + if (d_max_p) + *d_max_p = d_max; + + return 0; } -EXPORT_SYMBOL_GPL(acpi_device_power_state); /** * acpi_pm_device_sleep_state - Get preferred power state of ACPI device. @@ -529,7 +532,8 @@ EXPORT_SYMBOL_GPL(acpi_device_power_state); * @d_min_p: Location to store the upper limit of the allowed states range. * @d_max_in: Deepest low-power state to take into consideration. * Return value: Preferred power state of the device on success, -ENODEV - * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure + * if there's no 'struct acpi_device' for @dev, -EINVAL if @d_max_in is + * incorrect, or -ENODATA on ACPI method failure. * * The caller must ensure that @dev is valid before using this function. */ @@ -537,14 +541,43 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) { acpi_handle handle = DEVICE_ACPI_HANDLE(dev); struct acpi_device *adev; + int ret, d_min, d_max; + + if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3_COLD) + return -EINVAL; + + if (d_max_in > ACPI_STATE_D3_HOT) { + enum pm_qos_flags_status stat; + + stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); + if (stat == PM_QOS_FLAGS_ALL) + d_max_in = ACPI_STATE_D3_HOT; + } if (!handle || acpi_bus_get_device(handle, &adev)) { dev_dbg(dev, "ACPI handle without context in %s!\n", __func__); return -ENODEV; } - return acpi_device_power_state(dev, adev, acpi_target_system_state(), - d_max_in, d_min_p); + ret = acpi_dev_pm_get_state(dev, adev, acpi_target_system_state(), + &d_min, &d_max); + if (ret) + return ret; + + if (d_max_in < d_min) + return -EINVAL; + + if (d_max > d_max_in) { + for (d_max = d_max_in; d_max > d_min; d_max--) { + if (adev->power.states[d_max].flags.valid) + break; + } + } + + if (d_min_p) + *d_min_p = d_min; + + return d_max; } EXPORT_SYMBOL(acpi_pm_device_sleep_state); @@ -695,17 +728,13 @@ struct acpi_device *acpi_dev_pm_get_node(struct device *dev) static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev, u32 system_state) { - int power_state; + int ret, state; if (!acpi_device_power_manageable(adev)) return 0; - power_state = acpi_device_power_state(dev, adev, system_state, - ACPI_STATE_D3, NULL); - if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3) - return -EIO; - - return acpi_device_set_power(adev, power_state); + ret = acpi_dev_pm_get_state(dev, adev, system_state, NULL, &state); + return ret ? ret : acpi_device_set_power(adev, state); } /** @@ -908,7 +937,6 @@ static struct dev_pm_domain acpi_general_pm_domain = { #ifdef CONFIG_PM_RUNTIME .runtime_suspend = acpi_subsys_runtime_suspend, .runtime_resume = acpi_subsys_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, #endif #ifdef CONFIG_PM_SLEEP .prepare = acpi_subsys_prepare, diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index edc0081..80403c1 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -983,6 +983,10 @@ static struct dmi_system_id __initdata ec_dmi_table[] = { ec_enlarge_storm_threshold, "CLEVO hardware", { DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."), DMI_MATCH(DMI_PRODUCT_NAME, "M720T/M730T"),}, NULL}, + { + ec_skip_dsdt_scan, "HP Folio 13", { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13"),}, NULL}, {}, }; diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c index 7586544..4e7b798 100644 --- a/drivers/acpi/ec_sys.c +++ b/drivers/acpi/ec_sys.c @@ -12,6 +12,7 @@ #include <linux/acpi.h> #include <linux/debugfs.h> #include <linux/module.h> +#include <linux/uaccess.h> #include "internal.h" MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>"); @@ -34,7 +35,6 @@ static ssize_t acpi_ec_read_io(struct file *f, char __user *buf, * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private; */ unsigned int size = EC_SPACE_SIZE; - u8 *data = (u8 *) buf; loff_t init_off = *off; int err = 0; @@ -47,9 +47,15 @@ static ssize_t acpi_ec_read_io(struct file *f, char __user *buf, size = count; while (size) { - err = ec_read(*off, &data[*off - init_off]); + u8 byte_read; + err = ec_read(*off, &byte_read); if (err) return err; + if (put_user(byte_read, buf + *off - init_off)) { + if (*off - init_off) + return *off - init_off; /* partial read */ + return -EFAULT; + } *off += 1; size--; } @@ -65,7 +71,6 @@ static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf, unsigned int size = count; loff_t init_off = *off; - u8 *data = (u8 *) buf; int err = 0; if (*off >= EC_SPACE_SIZE) @@ -76,7 +81,12 @@ static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf, } while (size) { - u8 byte_write = data[*off - init_off]; + u8 byte_write; + if (get_user(byte_write, buf + *off - init_off)) { + if (*off - init_off) + return *off - init_off; /* partial write */ + return -EFAULT; + } err = ec_write(*off, byte_write); if (err) return err; diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 40a84cc..f680957 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -81,13 +81,15 @@ static struct acpi_bus_type *acpi_get_bus_type(struct device *dev) static acpi_status do_acpi_find_child(acpi_handle handle, u32 lvl_not_used, void *addr_p, void **ret_p) { - unsigned long long addr; + unsigned long long addr, sta; acpi_status status; status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr); if (ACPI_SUCCESS(status) && addr == *((u64 *)addr_p)) { *ret_p = handle; - return AE_CTRL_TERMINATE; + status = acpi_bus_get_status_handle(handle, &sta); + if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_ENABLED)) + return AE_CTRL_TERMINATE; } return AE_OK; } @@ -105,7 +107,7 @@ acpi_handle acpi_get_child(acpi_handle parent, u64 address) } EXPORT_SYMBOL(acpi_get_child); -static int acpi_bind_one(struct device *dev, acpi_handle handle) +int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; acpi_status status; @@ -188,8 +190,9 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) kfree(physical_node); goto err; } +EXPORT_SYMBOL_GPL(acpi_bind_one); -static int acpi_unbind_one(struct device *dev) +int acpi_unbind_one(struct device *dev) { struct acpi_device_physical_node *entry; struct acpi_device *acpi_dev; @@ -238,6 +241,7 @@ err: dev_err(dev, "Oops, 'acpi_handle' corrupt\n"); return -EINVAL; } +EXPORT_SYMBOL_GPL(acpi_unbind_one); static int acpi_platform_notify(struct device *dev) { diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index c610a76..3a50a34 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -33,6 +33,7 @@ static inline void acpi_pci_slot_init(void) { } void acpi_pci_root_init(void); void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); +void acpi_processor_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); #ifdef CONFIG_ACPI_CONTAINER @@ -50,6 +51,13 @@ void acpi_memory_hotplug_init(void); #else static inline void acpi_memory_hotplug_init(void) {} #endif +#ifdef CONFIG_X86 +void acpi_cmos_rtc_init(void); +#else +static inline void acpi_cmos_rtc_init(void) {} +#endif + +extern bool acpi_force_hot_remove; void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug, const char *name); @@ -81,6 +89,8 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle, int type, unsigned long long sta); void acpi_device_add_finalize(struct acpi_device *device); void acpi_free_pnp_ids(struct acpi_device_pnp *pnp); +int acpi_bind_one(struct device *dev, acpi_handle handle); +int acpi_unbind_one(struct device *dev); /* -------------------------------------------------------------------------- Power Resource diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e721863..6ab2c35 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -835,19 +835,9 @@ void acpi_os_stall(u32 us) */ u64 acpi_os_get_timer(void) { - static u64 t; - -#ifdef CONFIG_HPET - /* TBD: use HPET if available */ -#endif - -#ifdef CONFIG_X86_PM_TIMER - /* TBD: default to PM timer if HPET was not available */ -#endif - if (!t) - printk(KERN_ERR PREFIX "acpi_os_get_timer() TBD\n"); - - return ++t; + u64 time_ns = ktime_to_ns(ktime_get()); + do_div(time_ns, 100); + return time_ns; } acpi_status acpi_os_read_port(acpi_io_address port, u32 * value, u32 width) @@ -1715,6 +1705,17 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) } #endif +static int __init acpi_no_auto_ssdt_setup(char *s) +{ + printk(KERN_NOTICE PREFIX "SSDT auto-load disabled\n"); + + acpi_gbl_disable_ssdt_table_load = TRUE; + + return 1; +} + +__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup); + acpi_status __init acpi_os_initialize(void) { acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1a_event_block); diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index c266cdc..823be116 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -1,11 +1,13 @@ /* - * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $) + * processor_driver.c - ACPI Processor Driver * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> * - Added processor hotplug support + * Copyright (C) 2013, Intel Corporation + * Rafael J. Wysocki <rafael.j.wysocki@intel.com> * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * @@ -24,55 +26,26 @@ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * TBD: - * 1. Make # power states dynamic. - * 2. Support duty_cycle values that span bit 4. - * 3. Optimize by having scheduler determine business instead of - * having us try to calculate it here. - * 4. Need C1 timing -- must modify kernel (IRQ handler) to get this. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/pm.h> #include <linux/cpufreq.h> #include <linux/cpu.h> -#include <linux/dmi.h> -#include <linux/moduleparam.h> #include <linux/cpuidle.h> #include <linux/slab.h> #include <linux/acpi.h> -#include <linux/memory_hotplug.h> - -#include <asm/io.h> -#include <asm/cpu.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#include <asm/processor.h> -#include <asm/smp.h> -#include <asm/acpi.h> - -#include <acpi/acpi_bus.h> -#include <acpi/acpi_drivers.h> + #include <acpi/processor.h> +#include "internal.h" + #define PREFIX "ACPI: " -#define ACPI_PROCESSOR_CLASS "processor" -#define ACPI_PROCESSOR_DEVICE_NAME "Processor" -#define ACPI_PROCESSOR_FILE_INFO "info" -#define ACPI_PROCESSOR_FILE_THROTTLING "throttling" -#define ACPI_PROCESSOR_FILE_LIMIT "limit" #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 -#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" - -#define ACPI_PROCESSOR_LIMIT_USER 0 -#define ACPI_PROCESSOR_LIMIT_THERMAL 1 #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_driver"); @@ -81,12 +54,8 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI Processor Driver"); MODULE_LICENSE("GPL"); -static int acpi_processor_add(struct acpi_device *device); -static int acpi_processor_remove(struct acpi_device *device); -static void acpi_processor_notify(struct acpi_device *device, u32 event); -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr); -static int acpi_processor_handle_eject(struct acpi_processor *pr); -static int acpi_processor_start(struct acpi_processor *pr); +static int acpi_processor_start(struct device *dev); +static int acpi_processor_stop(struct device *dev); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, @@ -95,295 +64,24 @@ static const struct acpi_device_id processor_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); -static struct acpi_driver acpi_processor_driver = { +static struct device_driver acpi_processor_driver = { .name = "processor", - .class = ACPI_PROCESSOR_CLASS, - .ids = processor_device_ids, - .ops = { - .add = acpi_processor_add, - .remove = acpi_processor_remove, - .notify = acpi_processor_notify, - }, + .bus = &cpu_subsys, + .acpi_match_table = processor_device_ids, + .probe = acpi_processor_start, + .remove = acpi_processor_stop, }; -#define INSTALL_NOTIFY_HANDLER 1 -#define UNINSTALL_NOTIFY_HANDLER 2 - -DEFINE_PER_CPU(struct acpi_processor *, processors); -EXPORT_PER_CPU_SYMBOL(processors); - -struct acpi_processor_errata errata __read_mostly; - -/* -------------------------------------------------------------------------- - Errata Handling - -------------------------------------------------------------------------- */ - -static int acpi_processor_errata_piix4(struct pci_dev *dev) -{ - u8 value1 = 0; - u8 value2 = 0; - - - if (!dev) - return -EINVAL; - - /* - * Note that 'dev' references the PIIX4 ACPI Controller. - */ - - switch (dev->revision) { - case 0: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); - break; - case 1: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n")); - break; - case 2: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n")); - break; - case 3: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n")); - break; - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n")); - break; - } - - switch (dev->revision) { - - case 0: /* PIIX4 A-step */ - case 1: /* PIIX4 B-step */ - /* - * See specification changes #13 ("Manual Throttle Duty Cycle") - * and #14 ("Enabling and Disabling Manual Throttle"), plus - * erratum #5 ("STPCLK# Deassertion Time") from the January - * 2002 PIIX4 specification update. Applies to only older - * PIIX4 models. - */ - errata.piix4.throttle = 1; - - case 2: /* PIIX4E */ - case 3: /* PIIX4M */ - /* - * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA - * Livelock") from the January 2002 PIIX4 specification update. - * Applies to all PIIX4 models. - */ - - /* - * BM-IDE - * ------ - * Find the PIIX4 IDE Controller and get the Bus Master IDE - * Status register address. We'll use this later to read - * each IDE controller's DMA status to make sure we catch all - * DMA activity. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - errata.piix4.bmisx = pci_resource_start(dev, 4); - pci_dev_put(dev); - } - - /* - * Type-F DMA - * ---------- - * Find the PIIX4 ISA Controller and read the Motherboard - * DMA controller's status to see if Type-F (Fast) DMA mode - * is enabled (bit 7) on either channel. Note that we'll - * disable C3 support if this is enabled, as some legacy - * devices won't operate well if fast DMA is disabled. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_0, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - pci_read_config_byte(dev, 0x76, &value1); - pci_read_config_byte(dev, 0x77, &value2); - if ((value1 & 0x80) || (value2 & 0x80)) - errata.piix4.fdma = 1; - pci_dev_put(dev); - } - - break; - } - - if (errata.piix4.bmisx) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus master activity detection (BM-IDE) erratum enabled\n")); - if (errata.piix4.fdma) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Type-F DMA livelock erratum (C3 disabled)\n")); - - return 0; -} - -static int acpi_processor_errata(struct acpi_processor *pr) +static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) { - int result = 0; - struct pci_dev *dev = NULL; - - - if (!pr) - return -EINVAL; - - /* - * PIIX4 - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, - PCI_ANY_ID, NULL); - if (dev) { - result = acpi_processor_errata_piix4(dev); - pci_dev_put(dev); - } - - return result; -} - -/* -------------------------------------------------------------------------- - Driver Interface - -------------------------------------------------------------------------- */ - -static int acpi_processor_get_info(struct acpi_device *device) -{ - acpi_status status = 0; - union acpi_object object = { 0 }; - struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; + struct acpi_device *device = data; struct acpi_processor *pr; - int cpu_index, device_declaration = 0; - static int cpu0_initialized; - - pr = acpi_driver_data(device); - if (!pr) - return -EINVAL; - - if (num_online_cpus() > 1) - errata.smp = TRUE; - - acpi_processor_errata(pr); - - /* - * Check to see if we have bus mastering arbitration control. This - * is required for proper C3 usage (to maintain cache coherency). - */ - if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) { - pr->flags.bm_control = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus mastering arbitration control present\n")); - } else - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "No bus mastering arbitration control\n")); - - if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { - /* Declared with "Processor" statement; match ProcessorID */ - status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor object (0x%x)\n", - status); - return -ENODEV; - } - - /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in - * arch/xxx/acpi.c - */ - pr->acpi_id = object.processor.proc_id; - } else { - /* - * Declared with "Device" statement; match _UID. - * Note that we don't handle string _UIDs yet. - */ - unsigned long long value; - status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, - NULL, &value); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor _UID (0x%x)\n", - status); - return -ENODEV; - } - device_declaration = 1; - pr->acpi_id = value; - } - cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id); - - /* Handle UP system running SMP kernel, with no LAPIC in MADT */ - if (!cpu0_initialized && (cpu_index == -1) && - (num_online_cpus() == 1)) { - cpu_index = 0; - } - - cpu0_initialized = 1; - - pr->id = cpu_index; - - /* - * Extra Processor objects may be enumerated on MP systems with - * less than the max # of CPUs. They should be ignored _iff - * they are physically not present. - */ - if (pr->id == -1) { - if (ACPI_FAILURE(acpi_processor_hotadd_init(pr))) - return -ENODEV; - } - /* - * On some boxes several processors use the same processor bus id. - * But they are located in different scope. For example: - * \_SB.SCK0.CPU0 - * \_SB.SCK1.CPU0 - * Rename the processor device bus id. And the new bus id will be - * generated as the following format: - * CPU+CPU ID. - */ - sprintf(acpi_device_bid(device), "CPU%X", pr->id); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, - pr->acpi_id)); - - if (!object.processor.pblk_address) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); - else if (object.processor.pblk_length != 6) - dev_err(&device->dev, "Invalid PBLK length [%d]\n", - object.processor.pblk_length); - else { - pr->throttling.address = object.processor.pblk_address; - pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; - pr->throttling.duty_width = acpi_gbl_FADT.duty_width; - - pr->pblk = object.processor.pblk_address; - - /* - * We don't care about error returns - we just try to mark - * these reserved so that nobody else is confused into thinking - * that this region might be unused.. - * - * (In particular, allocating the IO range for Cardbus) - */ - request_region(pr->throttling.address, 6, "ACPI CPU throttle"); - } - - /* - * If ACPI describes a slot number for this CPU, we can use it - * ensure we get the right value in the "physical id" field - * of /proc/cpuinfo - */ - status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer); - if (ACPI_SUCCESS(status)) - arch_fix_phys_package_id(pr->id, object.integer.value); - - return 0; -} - -static DEFINE_PER_CPU(void *, processor_device_array); - -static void acpi_processor_notify(struct acpi_device *device, u32 event) -{ - struct acpi_processor *pr = acpi_driver_data(device); int saved; + if (device->handle != handle) + return; + + pr = acpi_driver_data(device); if (!pr) return; @@ -420,55 +118,62 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event) return; } -static int acpi_cpu_soft_notify(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static __cpuinit int __acpi_processor_start(struct acpi_device *device); + +static int __cpuinit acpi_cpu_soft_notify(struct notifier_block *nfb, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; struct acpi_processor *pr = per_cpu(processors, cpu); + struct acpi_device *device; + + if (!pr || acpi_bus_get_device(pr->handle, &device)) + return NOTIFY_DONE; - if (action == CPU_ONLINE && pr) { - /* CPU got physically hotplugged and onlined the first time: - * Initialize missing things + if (action == CPU_ONLINE) { + /* + * CPU got physically hotplugged and onlined for the first time: + * Initialize missing things. */ if (pr->flags.need_hotplug_init) { + int ret; + pr_info("Will online and init hotplugged CPU: %d\n", pr->id); - WARN(acpi_processor_start(pr), "Failed to start CPU:" - " %d\n", pr->id); pr->flags.need_hotplug_init = 0; - /* Normal CPU soft online event */ + ret = __acpi_processor_start(device); + WARN(ret, "Failed to start CPU: %d\n", pr->id); } else { + /* Normal CPU soft online event. */ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_hotplug(pr); acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } - } - if (action == CPU_DEAD && pr) { - /* invalidate the flag.throttling after one CPU is offline */ + } else if (action == CPU_DEAD) { + /* Invalidate flag.throttling after the CPU is offline. */ acpi_processor_reevaluate_tstate(pr, action); } return NOTIFY_OK; } -static struct notifier_block acpi_cpu_notifier = +static struct notifier_block __refdata acpi_cpu_notifier = { .notifier_call = acpi_cpu_soft_notify, }; -/* - * acpi_processor_start() is called by the cpu_hotplug_notifier func: - * acpi_cpu_soft_notify(). Getting it __cpuinit{data} is difficult, the - * root cause seem to be that acpi_processor_uninstall_hotplug_notify() - * is in the module_exit (__exit) func. Allowing acpi_processor_start() - * to not be in __cpuinit section, but being called from __cpuinit funcs - * via __ref looks like the right thing to do here. - */ -static __ref int acpi_processor_start(struct acpi_processor *pr) +static __cpuinit int __acpi_processor_start(struct acpi_device *device) { - struct acpi_device *device = per_cpu(processor_device_array, pr->id); + struct acpi_processor *pr = acpi_driver_data(device); + acpi_status status; int result = 0; + if (!pr) + return -ENODEV; + + if (pr->flags.need_hotplug_init) + return 0; + #ifdef CONFIG_CPU_FREQ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_load_module(pr); @@ -506,462 +211,95 @@ static __ref int acpi_processor_start(struct acpi_processor *pr) goto err_remove_sysfs_thermal; } - return 0; + status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify, device); + if (ACPI_SUCCESS(status)) + return 0; -err_remove_sysfs_thermal: + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + err_remove_sysfs_thermal: sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); -err_thermal_unregister: + err_thermal_unregister: thermal_cooling_device_unregister(pr->cdev); -err_power_exit: + err_power_exit: acpi_processor_power_exit(pr); - return result; } -/* - * Do not put anything in here which needs the core to be online. - * For example MSR access or setting up things which check for cpuinfo_x86 - * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. - * Such things have to be put in and set up above in acpi_processor_start() - */ -static int __cpuinit acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_start(struct device *dev) { - struct acpi_processor *pr = NULL; - int result = 0; - struct device *dev; - - pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); - if (!pr) - return -ENOMEM; - - if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - result = -ENOMEM; - goto err_free_pr; - } - - pr->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS); - device->driver_data = pr; - - result = acpi_processor_get_info(device); - if (result) { - /* Processor is physically not present */ - return 0; - } + struct acpi_device *device; -#ifdef CONFIG_SMP - if (pr->id >= setup_max_cpus && pr->id != 0) - return 0; -#endif - - BUG_ON(pr->id >= nr_cpu_ids); - - /* - * Buggy BIOS check - * ACPI id of processors can be reported wrongly by the BIOS. - * Don't trust it blindly - */ - if (per_cpu(processor_device_array, pr->id) != NULL && - per_cpu(processor_device_array, pr->id) != device) { - dev_warn(&device->dev, - "BIOS reported wrong ACPI id %d for the processor\n", - pr->id); - result = -ENODEV; - goto err_free_cpumask; - } - per_cpu(processor_device_array, pr->id) = device; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return -ENODEV; - per_cpu(processors, pr->id) = pr; - - dev = get_cpu_device(pr->id); - if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { - result = -EFAULT; - goto err_clear_processor; - } - - /* - * Do not start hotplugged CPUs now, but when they - * are onlined the first time - */ - if (pr->flags.need_hotplug_init) - return 0; - - result = acpi_processor_start(pr); - if (result) - goto err_remove_sysfs; - - return 0; - -err_remove_sysfs: - sysfs_remove_link(&device->dev.kobj, "sysdev"); -err_clear_processor: - /* - * processor_device_array is not cleared to allow checks for buggy BIOS - */ - per_cpu(processors, pr->id) = NULL; -err_free_cpumask: - free_cpumask_var(pr->throttling.shared_cpu_map); -err_free_pr: - kfree(pr); - return result; + return __acpi_processor_start(device); } -static int acpi_processor_remove(struct acpi_device *device) +static int acpi_processor_stop(struct device *dev) { - struct acpi_processor *pr = NULL; + struct acpi_device *device; + struct acpi_processor *pr; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return 0; - if (!device || !acpi_driver_data(device)) - return -EINVAL; + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify); pr = acpi_driver_data(device); - - if (pr->id >= nr_cpu_ids) - goto free; - - if (device->removal_type == ACPI_BUS_REMOVAL_EJECT) { - if (acpi_processor_handle_eject(pr)) - return -EINVAL; - } + if (!pr) + return 0; acpi_processor_power_exit(pr); - sysfs_remove_link(&device->dev.kobj, "sysdev"); - if (pr->cdev) { sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); sysfs_remove_link(&pr->cdev->device.kobj, "device"); thermal_cooling_device_unregister(pr->cdev); pr->cdev = NULL; } - - per_cpu(processors, pr->id) = NULL; - per_cpu(processor_device_array, pr->id) = NULL; - try_offline_node(cpu_to_node(pr->id)); - -free: - free_cpumask_var(pr->throttling.shared_cpu_map); - kfree(pr); - return 0; } -#ifdef CONFIG_ACPI_HOTPLUG_CPU -/**************************************************************************** - * Acpi processor hotplug support * - ****************************************************************************/ - -static int is_processor_present(acpi_handle handle) -{ - acpi_status status; - unsigned long long sta = 0; - - - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - - if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT)) - return 1; - - /* - * _STA is mandatory for a processor that supports hot plug - */ - if (status == AE_NOT_FOUND) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor does not support hot plug\n")); - else - ACPI_EXCEPTION((AE_INFO, status, - "Processor Device is not present")); - return 0; -} - -static void acpi_processor_hotplug_notify(acpi_handle handle, - u32 event, void *data) -{ - struct acpi_device *device = NULL; - struct acpi_eject_event *ej_event = NULL; - u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ - acpi_status status; - int result; - - acpi_scan_lock_acquire(); - - switch (event) { - case ACPI_NOTIFY_BUS_CHECK: - case ACPI_NOTIFY_DEVICE_CHECK: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor driver received %s event\n", - (event == ACPI_NOTIFY_BUS_CHECK) ? - "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK")); - - if (!is_processor_present(handle)) - break; - - if (!acpi_bus_get_device(handle, &device)) - break; - - result = acpi_bus_scan(handle); - if (result) { - acpi_handle_err(handle, "Unable to add the device\n"); - break; - } - result = acpi_bus_get_device(handle, &device); - if (result) { - acpi_handle_err(handle, "Missing device object\n"); - break; - } - ost_code = ACPI_OST_SC_SUCCESS; - break; - - case ACPI_NOTIFY_EJECT_REQUEST: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "received ACPI_NOTIFY_EJECT_REQUEST\n")); - - if (acpi_bus_get_device(handle, &device)) { - acpi_handle_err(handle, - "Device don't exist, dropping EJECT\n"); - break; - } - if (!acpi_driver_data(device)) { - acpi_handle_err(handle, - "Driver data is NULL, dropping EJECT\n"); - break; - } - - ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); - if (!ej_event) { - acpi_handle_err(handle, "No memory, dropping EJECT\n"); - break; - } - - get_device(&device->dev); - ej_event->device = device; - ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; - /* The eject is carried out asynchronously. */ - status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, - ej_event); - if (ACPI_FAILURE(status)) { - put_device(&device->dev); - kfree(ej_event); - break; - } - goto out; - - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Unsupported event [0x%x]\n", event)); - - /* non-hotplug event; possibly handled by other handler */ - goto out; - } - - /* Inform firmware that the hotplug operation has completed */ - (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL); - - out: - acpi_scan_lock_release(); -} - -static acpi_status is_processor_device(acpi_handle handle) -{ - struct acpi_device_info *info; - char *hid; - acpi_status status; - - status = acpi_get_object_info(handle, &info); - if (ACPI_FAILURE(status)) - return status; - - if (info->type == ACPI_TYPE_PROCESSOR) { - kfree(info); - return AE_OK; /* found a processor object */ - } - - if (!(info->valid & ACPI_VALID_HID)) { - kfree(info); - return AE_ERROR; - } - - hid = info->hardware_id.string; - if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { - kfree(info); - return AE_ERROR; - } - - kfree(info); - return AE_OK; /* found a processor device object */ -} - -static acpi_status -processor_walk_namespace_cb(acpi_handle handle, - u32 lvl, void *context, void **rv) -{ - acpi_status status; - int *action = context; - - status = is_processor_device(handle); - if (ACPI_FAILURE(status)) - return AE_OK; /* not a processor; continue to walk */ - - switch (*action) { - case INSTALL_NOTIFY_HANDLER: - acpi_install_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify, - NULL); - break; - case UNINSTALL_NOTIFY_HANDLER: - acpi_remove_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify); - break; - default: - break; - } - - /* found a processor; skip walking underneath */ - return AE_CTRL_DEPTH; -} - -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - acpi_handle handle = pr->handle; - - if (!is_processor_present(handle)) { - return AE_ERROR; - } - - if (acpi_map_lsapic(handle, &pr->id)) - return AE_ERROR; - - if (arch_register_cpu(pr->id)) { - acpi_unmap_lsapic(pr->id); - return AE_ERROR; - } - - /* CPU got hot-plugged, but cpu_data is not initialized yet - * Set flag to delay cpu_idle/throttling initialization - * in: - * acpi_processor_add() - * acpi_processor_get_info() - * and do it when the CPU gets online the first time - * TBD: Cleanup above functions and try to do this more elegant. - */ - pr_info("CPU %d got hotplugged\n", pr->id); - pr->flags.need_hotplug_init = 1; - - return AE_OK; -} - -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - if (cpu_online(pr->id)) - cpu_down(pr->id); - - get_online_cpus(); - /* - * The cpu might become online again at this point. So we check whether - * the cpu has been onlined or not. If the cpu became online, it means - * that someone wants to use the cpu. So acpi_processor_handle_eject() - * returns -EAGAIN. - */ - if (unlikely(cpu_online(pr->id))) { - put_online_cpus(); - pr_warn("Failed to remove CPU %d, because other task " - "brought the CPU back online\n", pr->id); - return -EAGAIN; - } - arch_unregister_cpu(pr->id); - acpi_unmap_lsapic(pr->id); - put_online_cpus(); - return (0); -} -#else -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - return AE_ERROR; -} -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - return (-EINVAL); -} -#endif - -static -void acpi_processor_install_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - register_hotcpu_notifier(&acpi_cpu_notifier); -} - -static -void acpi_processor_uninstall_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - unregister_hotcpu_notifier(&acpi_cpu_notifier); -} - /* * We keep the driver loaded even when ACPI is not running. * This is needed for the powernow-k8 driver, that works even without * ACPI, but needs symbols from this driver */ -static int __init acpi_processor_init(void) +static int __init acpi_processor_driver_init(void) { int result = 0; if (acpi_disabled) return 0; - result = acpi_bus_register_driver(&acpi_processor_driver); + result = driver_register(&acpi_processor_driver); if (result < 0) return result; acpi_processor_syscore_init(); - - acpi_processor_install_hotplug_notify(); - + register_hotcpu_notifier(&acpi_cpu_notifier); acpi_thermal_cpufreq_init(); - acpi_processor_ppc_init(); - acpi_processor_throttling_init(); - return 0; } -static void __exit acpi_processor_exit(void) +static void __exit acpi_processor_driver_exit(void) { if (acpi_disabled) return; acpi_processor_ppc_exit(); - acpi_thermal_cpufreq_exit(); - - acpi_processor_uninstall_hotplug_notify(); - + unregister_hotcpu_notifier(&acpi_cpu_notifier); acpi_processor_syscore_exit(); - - acpi_bus_unregister_driver(&acpi_processor_driver); - - return; + driver_unregister(&acpi_processor_driver); } -module_init(acpi_processor_init); -module_exit(acpi_processor_exit); +module_init(acpi_processor_driver_init); +module_exit(acpi_processor_driver_exit); MODULE_ALIAS("processor"); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index eb133c7..0461ccc 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -214,13 +214,13 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr, #ifdef CONFIG_PM_SLEEP static u32 saved_bm_rld; -int acpi_processor_suspend(void) +static int acpi_processor_suspend(void) { acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); return 0; } -void acpi_processor_resume(void) +static void acpi_processor_resume(void) { u32 resumed_bm_rld; diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index e854582..1e9732d 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -639,7 +639,7 @@ end: int acpi_processor_preregister_performance( struct acpi_processor_performance __percpu *performance) { - int count, count_target; + int count_target; int retval = 0; unsigned int i, j; cpumask_var_t covered_cpus; @@ -711,7 +711,6 @@ int acpi_processor_preregister_performance( /* Validate the Domain info */ count_target = pdomain->num_processors; - count = 1; if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL) pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL; else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL) @@ -745,7 +744,6 @@ int acpi_processor_preregister_performance( cpumask_set_cpu(j, covered_cpus); cpumask_set_cpu(j, pr->performance->shared_cpu_map); - count++; } for_each_possible_cpu(j) { diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 27da630..dfe76f1 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -27,6 +27,12 @@ extern struct acpi_device *acpi_root; #define ACPI_IS_ROOT_DEVICE(device) (!(device)->parent) +/* + * If set, devices will be hot-removed even if they cannot be put offline + * gracefully (from the kernel's standpoint). + */ +bool acpi_force_hot_remove; + static const char *dummy_hid = "device"; static LIST_HEAD(acpi_device_list); @@ -120,12 +126,78 @@ acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, cha } static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL); +static acpi_status acpi_bus_offline_companions(acpi_handle handle, u32 lvl, + void *data, void **ret_p) +{ + struct acpi_device *device = NULL; + struct acpi_device_physical_node *pn; + bool second_pass = (bool)data; + acpi_status status = AE_OK; + + if (acpi_bus_get_device(handle, &device)) + return AE_OK; + + mutex_lock(&device->physical_node_lock); + + list_for_each_entry(pn, &device->physical_node_list, node) { + int ret; + + if (second_pass) { + /* Skip devices offlined by the first pass. */ + if (pn->put_online) + continue; + } else { + pn->put_online = false; + } + ret = device_offline(pn->dev); + if (acpi_force_hot_remove) + continue; + + if (ret >= 0) { + pn->put_online = !ret; + } else { + *ret_p = pn->dev; + if (second_pass) { + status = AE_ERROR; + break; + } + } + } + + mutex_unlock(&device->physical_node_lock); + + return status; +} + +static acpi_status acpi_bus_online_companions(acpi_handle handle, u32 lvl, + void *data, void **ret_p) +{ + struct acpi_device *device = NULL; + struct acpi_device_physical_node *pn; + + if (acpi_bus_get_device(handle, &device)) + return AE_OK; + + mutex_lock(&device->physical_node_lock); + + list_for_each_entry(pn, &device->physical_node_list, node) + if (pn->put_online) { + device_online(pn->dev); + pn->put_online = false; + } + + mutex_unlock(&device->physical_node_lock); + + return AE_OK; +} + static int acpi_scan_hot_remove(struct acpi_device *device) { acpi_handle handle = device->handle; acpi_handle not_used; struct acpi_object_list arg_list; union acpi_object arg; + struct device *errdev; acpi_status status; unsigned long long sta; @@ -136,10 +208,53 @@ static int acpi_scan_hot_remove(struct acpi_device *device) return -EINVAL; } + lock_device_hotplug(); + + /* + * Carry out two passes here and ignore errors in the first pass, + * because if the devices in question are memory blocks and + * CONFIG_MEMCG is set, one of the blocks may hold data structures + * that the other blocks depend on, but it is not known in advance which + * block holds them. + * + * If the first pass is successful, the second one isn't needed, though. + */ + errdev = NULL; + acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX, + NULL, acpi_bus_offline_companions, + (void *)false, (void **)&errdev); + acpi_bus_offline_companions(handle, 0, (void *)false, (void **)&errdev); + if (errdev) { + errdev = NULL; + acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX, + NULL, acpi_bus_offline_companions, + (void *)true , (void **)&errdev); + if (!errdev || acpi_force_hot_remove) + acpi_bus_offline_companions(handle, 0, (void *)true, + (void **)&errdev); + + if (errdev && !acpi_force_hot_remove) { + dev_warn(errdev, "Offline failed.\n"); + acpi_bus_online_companions(handle, 0, NULL, NULL); + acpi_walk_namespace(ACPI_TYPE_ANY, handle, + ACPI_UINT32_MAX, + acpi_bus_online_companions, NULL, + NULL, NULL); + + unlock_device_hotplug(); + + put_device(&device->dev); + return -EBUSY; + } + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Hot-removing device %s...\n", dev_name(&device->dev))); acpi_bus_trim(device); + + unlock_device_hotplug(); + /* Device node has been unregistered. */ put_device(&device->dev); device = NULL; @@ -236,6 +351,7 @@ static void acpi_scan_bus_device_check(acpi_handle handle, u32 ost_source) int error; mutex_lock(&acpi_scan_lock); + lock_device_hotplug(); acpi_bus_get_device(handle, &device); if (device) { @@ -259,6 +375,7 @@ static void acpi_scan_bus_device_check(acpi_handle handle, u32 ost_source) kobject_uevent(&device->dev.kobj, KOBJ_ONLINE); out: + unlock_device_hotplug(); acpi_evaluate_hotplug_ost(handle, ost_source, ost_code, NULL); mutex_unlock(&acpi_scan_lock); } @@ -816,32 +933,43 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device) acpi_device_notify); } -static int acpi_bus_driver_init(struct acpi_device *, struct acpi_driver *); -static int acpi_device_probe(struct device * dev) +static int acpi_device_probe(struct device *dev) { struct acpi_device *acpi_dev = to_acpi_device(dev); struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); int ret; - ret = acpi_bus_driver_init(acpi_dev, acpi_drv); - if (!ret) { - if (acpi_drv->ops.notify) { - ret = acpi_device_install_notify_handler(acpi_dev); - if (ret) { - if (acpi_drv->ops.remove) - acpi_drv->ops.remove(acpi_dev); - acpi_dev->driver = NULL; - acpi_dev->driver_data = NULL; - return ret; - } - } + if (acpi_dev->handler) + return -EINVAL; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Found driver [%s] for device [%s]\n", - acpi_drv->name, acpi_dev->pnp.bus_id)); - get_device(dev); + if (!acpi_drv->ops.add) + return -ENOSYS; + + ret = acpi_drv->ops.add(acpi_dev); + if (ret) + return ret; + + acpi_dev->driver = acpi_drv; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Driver [%s] successfully bound to device [%s]\n", + acpi_drv->name, acpi_dev->pnp.bus_id)); + + if (acpi_drv->ops.notify) { + ret = acpi_device_install_notify_handler(acpi_dev); + if (ret) { + if (acpi_drv->ops.remove) + acpi_drv->ops.remove(acpi_dev); + + acpi_dev->driver = NULL; + acpi_dev->driver_data = NULL; + return ret; + } } - return ret; + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found driver [%s] for device [%s]\n", + acpi_drv->name, acpi_dev->pnp.bus_id)); + get_device(dev); + return 0; } static int acpi_device_remove(struct device * dev) @@ -952,7 +1080,6 @@ int acpi_device_add(struct acpi_device *device, printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", dev_name(&device->dev)); - device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; err: @@ -998,41 +1125,6 @@ static void acpi_device_unregister(struct acpi_device *device) Driver Management -------------------------------------------------------------------------- */ /** - * acpi_bus_driver_init - add a device to a driver - * @device: the device to add and initialize - * @driver: driver for the device - * - * Used to initialize a device via its device driver. Called whenever a - * driver is bound to a device. Invokes the driver's add() ops. - */ -static int -acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver) -{ - int result = 0; - - if (!device || !driver) - return -EINVAL; - - if (!driver->ops.add) - return -ENOSYS; - - result = driver->ops.add(device); - if (result) - return result; - - device->driver = driver; - - /* - * TBD - Configuration Management: Assign resources to device based - * upon possible configuration and currently allocated resources. - */ - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Driver successfully bound to device\n")); - return 0; -} - -/** * acpi_bus_register_driver - register a driver with the ACPI bus * @driver: driver being registered * @@ -1939,7 +2031,6 @@ static acpi_status acpi_bus_device_detach(acpi_handle handle, u32 lvl_not_used, if (!acpi_bus_get_device(handle, &device)) { struct acpi_scan_handler *dev_handler = device->handler; - device->removal_type = ACPI_BUS_REMOVAL_EJECT; if (dev_handler) { if (dev_handler->detach) dev_handler->detach(device); @@ -2038,8 +2129,10 @@ int __init acpi_scan_init(void) acpi_pci_root_init(); acpi_pci_link_init(); + acpi_processor_init(); acpi_platform_init(); acpi_lpss_init(); + acpi_cmos_rtc_init(); acpi_container_init(); acpi_memory_hotplug_init(); acpi_dock_init(); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 9c1a435..187ab61 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -494,6 +494,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) break; case ACPI_STATE_S3: + if (!acpi_suspend_lowlevel) + return -ENOSYS; error = acpi_suspend_lowlevel(); if (error) return error; diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index fcae5fa..5c5d162 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -780,6 +780,33 @@ void acpi_sysfs_add_hotplug_profile(struct acpi_hotplug_profile *hotplug, pr_err(PREFIX "Unable to add hotplug profile '%s'\n", name); } +static ssize_t force_remove_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", !!acpi_force_hot_remove); +} + +static ssize_t force_remove_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t size) +{ + bool val; + int ret; + + ret = strtobool(buf, &val); + if (ret < 0) + return ret; + + lock_device_hotplug(); + acpi_force_hot_remove = val; + unlock_device_hotplug(); + return size; +} + +static const struct kobj_attribute force_remove_attr = + __ATTR(force_remove, S_IRUGO | S_IWUSR, force_remove_show, + force_remove_store); + int __init acpi_sysfs_init(void) { int result; @@ -789,6 +816,10 @@ int __init acpi_sysfs_init(void) return result; hotplug_kobj = kobject_create_and_add("hotplug", acpi_kobj); + result = sysfs_create_file(hotplug_kobj, &force_remove_attr.attr); + if (result) + return result; + result = sysfs_create_file(acpi_kobj, &pm_profile_attr.attr); return result; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 440eadf..5d7075d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1722,9 +1722,6 @@ static int acpi_video_bus_add(struct acpi_device *device) int error; acpi_status status; - if (device->handler) - return -EINVAL; - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, device->parent->handle, 1, acpi_video_bus_match, NULL, diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index cdbad3a..c670727 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -284,7 +284,7 @@ static const struct dev_pm_ops amba_pm = { SET_RUNTIME_PM_OPS( amba_pm_runtime_suspend, amba_pm_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index adf002a..6e458a4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5436,7 +5436,7 @@ static int ata_port_runtime_idle(struct device *dev) return -EBUSY; } - return pm_runtime_suspend(dev); + return 0; } static int ata_port_runtime_suspend(struct device *dev) diff --git a/drivers/base/core.c b/drivers/base/core.c index 6fdc53d..dc3ea23 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -403,6 +403,36 @@ static ssize_t store_uevent(struct device *dev, struct device_attribute *attr, static struct device_attribute uevent_attr = __ATTR(uevent, S_IRUGO | S_IWUSR, show_uevent, store_uevent); +static ssize_t show_online(struct device *dev, struct device_attribute *attr, + char *buf) +{ + bool val; + + lock_device_hotplug(); + val = !dev->offline; + unlock_device_hotplug(); + return sprintf(buf, "%u\n", val); +} + +static ssize_t store_online(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + bool val; + int ret; + + ret = strtobool(buf, &val); + if (ret < 0) + return ret; + + lock_device_hotplug(); + ret = val ? device_online(dev) : device_offline(dev); + unlock_device_hotplug(); + return ret < 0 ? ret : count; +} + +static struct device_attribute online_attr = + __ATTR(online, S_IRUGO | S_IWUSR, show_online, store_online); + static int device_add_attributes(struct device *dev, struct device_attribute *attrs) { @@ -516,6 +546,12 @@ static int device_add_attrs(struct device *dev) if (error) goto err_remove_type_groups; + if (device_supports_offline(dev) && !dev->offline_disabled) { + error = device_create_file(dev, &online_attr); + if (error) + goto err_remove_type_groups; + } + return 0; err_remove_type_groups: @@ -536,6 +572,7 @@ static void device_remove_attrs(struct device *dev) struct class *class = dev->class; const struct device_type *type = dev->type; + device_remove_file(dev, &online_attr); device_remove_groups(dev, dev->groups); if (type) @@ -1435,6 +1472,99 @@ EXPORT_SYMBOL_GPL(put_device); EXPORT_SYMBOL_GPL(device_create_file); EXPORT_SYMBOL_GPL(device_remove_file); +static DEFINE_MUTEX(device_hotplug_lock); + +void lock_device_hotplug(void) +{ + mutex_lock(&device_hotplug_lock); +} + +void unlock_device_hotplug(void) +{ + mutex_unlock(&device_hotplug_lock); +} + +static int device_check_offline(struct device *dev, void *not_used) +{ + int ret; + + ret = device_for_each_child(dev, NULL, device_check_offline); + if (ret) + return ret; + + return device_supports_offline(dev) && !dev->offline ? -EBUSY : 0; +} + +/** + * device_offline - Prepare the device for hot-removal. + * @dev: Device to be put offline. + * + * Execute the device bus type's .offline() callback, if present, to prepare + * the device for a subsequent hot-removal. If that succeeds, the device must + * not be used until either it is removed or its bus type's .online() callback + * is executed. + * + * Call under device_hotplug_lock. + */ +int device_offline(struct device *dev) +{ + int ret; + + if (dev->offline_disabled) + return -EPERM; + + ret = device_for_each_child(dev, NULL, device_check_offline); + if (ret) + return ret; + + device_lock(dev); + if (device_supports_offline(dev)) { + if (dev->offline) { + ret = 1; + } else { + ret = dev->bus->offline(dev); + if (!ret) { + kobject_uevent(&dev->kobj, KOBJ_OFFLINE); + dev->offline = true; + } + } + } + device_unlock(dev); + + return ret; +} + +/** + * device_online - Put the device back online after successful device_offline(). + * @dev: Device to be put back online. + * + * If device_offline() has been successfully executed for @dev, but the device + * has not been removed subsequently, execute its bus type's .online() callback + * to indicate that the device can be used again. + * + * Call under device_hotplug_lock. + */ +int device_online(struct device *dev) +{ + int ret = 0; + + device_lock(dev); + if (device_supports_offline(dev)) { + if (dev->offline) { + ret = dev->bus->online(dev); + if (!ret) { + kobject_uevent(&dev->kobj, KOBJ_ONLINE); + dev->offline = false; + } + } else { + ret = 1; + } + } + device_unlock(dev); + + return ret; +} + struct root_device { struct device dev; struct module *owner; diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index c377673..a16d20e 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -13,17 +13,21 @@ #include <linux/gfp.h> #include <linux/slab.h> #include <linux/percpu.h> +#include <linux/acpi.h> #include "base.h" -struct bus_type cpu_subsys = { - .name = "cpu", - .dev_name = "cpu", -}; -EXPORT_SYMBOL_GPL(cpu_subsys); - static DEFINE_PER_CPU(struct device *, cpu_sys_devices); +static int cpu_subsys_match(struct device *dev, struct device_driver *drv) +{ + /* ACPI style match is the only one that may succeed. */ + if (acpi_driver_match_device(dev, drv)) + return 1; + + return 0; +} + #ifdef CONFIG_HOTPLUG_CPU static void change_cpu_under_node(struct cpu *cpu, unsigned int from_nid, unsigned int to_nid) @@ -34,65 +38,38 @@ static void change_cpu_under_node(struct cpu *cpu, cpu->node_id = to_nid; } -static ssize_t show_online(struct device *dev, - struct device_attribute *attr, - char *buf) +static int __ref cpu_subsys_online(struct device *dev) { struct cpu *cpu = container_of(dev, struct cpu, dev); + int cpuid = dev->id; + int from_nid, to_nid; + int ret; + + cpu_hotplug_driver_lock(); - return sprintf(buf, "%u\n", !!cpu_online(cpu->dev.id)); + from_nid = cpu_to_node(cpuid); + ret = cpu_up(cpuid); + /* + * When hot adding memory to memoryless node and enabling a cpu + * on the node, node number of the cpu may internally change. + */ + to_nid = cpu_to_node(cpuid); + if (from_nid != to_nid) + change_cpu_under_node(cpu, from_nid, to_nid); + + cpu_hotplug_driver_unlock(); + return ret; } -static ssize_t __ref store_online(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int cpu_subsys_offline(struct device *dev) { - struct cpu *cpu = container_of(dev, struct cpu, dev); - int cpuid = cpu->dev.id; - int from_nid, to_nid; - ssize_t ret; + int ret; cpu_hotplug_driver_lock(); - switch (buf[0]) { - case '0': - ret = cpu_down(cpuid); - if (!ret) - kobject_uevent(&dev->kobj, KOBJ_OFFLINE); - break; - case '1': - from_nid = cpu_to_node(cpuid); - ret = cpu_up(cpuid); - - /* - * When hot adding memory to memoryless node and enabling a cpu - * on the node, node number of the cpu may internally change. - */ - to_nid = cpu_to_node(cpuid); - if (from_nid != to_nid) - change_cpu_under_node(cpu, from_nid, to_nid); - - if (!ret) - kobject_uevent(&dev->kobj, KOBJ_ONLINE); - break; - default: - ret = -EINVAL; - } + ret = cpu_down(dev->id); cpu_hotplug_driver_unlock(); - - if (ret >= 0) - ret = count; return ret; } -static DEVICE_ATTR(online, 0644, show_online, store_online); - -static struct attribute *hotplug_cpu_attrs[] = { - &dev_attr_online.attr, - NULL -}; - -static struct attribute_group hotplug_cpu_attr_group = { - .attrs = hotplug_cpu_attrs, -}; void unregister_cpu(struct cpu *cpu) { @@ -127,6 +104,17 @@ static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store); #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ #endif /* CONFIG_HOTPLUG_CPU */ +struct bus_type cpu_subsys = { + .name = "cpu", + .dev_name = "cpu", + .match = cpu_subsys_match, +#ifdef CONFIG_HOTPLUG_CPU + .online = cpu_subsys_online, + .offline = cpu_subsys_offline, +#endif +}; +EXPORT_SYMBOL_GPL(cpu_subsys); + #ifdef CONFIG_KEXEC #include <linux/kexec.h> @@ -185,9 +173,6 @@ static const struct attribute_group *hotplugable_cpu_attr_groups[] = { #ifdef CONFIG_KEXEC &crash_note_cpu_attr_group, #endif -#ifdef CONFIG_HOTPLUG_CPU - &hotplug_cpu_attr_group, -#endif NULL }; @@ -302,6 +287,8 @@ int __cpuinit register_cpu(struct cpu *cpu, int num) cpu->dev.id = num; cpu->dev.bus = &cpu_subsys; cpu->dev.release = cpu_device_release; + cpu->dev.offline_disabled = !cpu->hotpluggable; + cpu->dev.offline = !cpu_online(num); #ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE cpu->dev.bus->uevent = arch_cpu_uevent; #endif diff --git a/drivers/base/memory.c b/drivers/base/memory.c index e315051..2b7813e 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -37,9 +37,14 @@ static inline int base_memory_block_id(int section_nr) return section_nr / sections_per_block; } +static int memory_subsys_online(struct device *dev); +static int memory_subsys_offline(struct device *dev); + static struct bus_type memory_subsys = { .name = MEMORY_CLASS_NAME, .dev_name = MEMORY_CLASS_NAME, + .online = memory_subsys_online, + .offline = memory_subsys_offline, }; static BLOCKING_NOTIFIER_HEAD(memory_chain); @@ -262,33 +267,64 @@ static int __memory_block_change_state(struct memory_block *mem, { int ret = 0; - if (mem->state != from_state_req) { - ret = -EINVAL; - goto out; - } + if (mem->state != from_state_req) + return -EINVAL; if (to_state == MEM_OFFLINE) mem->state = MEM_GOING_OFFLINE; ret = memory_block_action(mem->start_section_nr, to_state, online_type); + mem->state = ret ? from_state_req : to_state; + return ret; +} - if (ret) { - mem->state = from_state_req; - goto out; - } +static int memory_subsys_online(struct device *dev) +{ + struct memory_block *mem = container_of(dev, struct memory_block, dev); + int ret; - mem->state = to_state; - switch (mem->state) { - case MEM_OFFLINE: - kobject_uevent(&mem->dev.kobj, KOBJ_OFFLINE); - break; - case MEM_ONLINE: - kobject_uevent(&mem->dev.kobj, KOBJ_ONLINE); - break; - default: - break; + mutex_lock(&mem->state_mutex); + + ret = mem->state == MEM_ONLINE ? 0 : + __memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, + ONLINE_KEEP); + + mutex_unlock(&mem->state_mutex); + return ret; +} + +static int memory_subsys_offline(struct device *dev) +{ + struct memory_block *mem = container_of(dev, struct memory_block, dev); + int ret; + + mutex_lock(&mem->state_mutex); + + ret = mem->state == MEM_OFFLINE ? 0 : + __memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + + mutex_unlock(&mem->state_mutex); + return ret; +} + +static int __memory_block_change_state_uevent(struct memory_block *mem, + unsigned long to_state, unsigned long from_state_req, + int online_type) +{ + int ret = __memory_block_change_state(mem, to_state, from_state_req, + online_type); + if (!ret) { + switch (mem->state) { + case MEM_OFFLINE: + kobject_uevent(&mem->dev.kobj, KOBJ_OFFLINE); + break; + case MEM_ONLINE: + kobject_uevent(&mem->dev.kobj, KOBJ_ONLINE); + break; + default: + break; + } } -out: return ret; } @@ -299,8 +335,8 @@ static int memory_block_change_state(struct memory_block *mem, int ret; mutex_lock(&mem->state_mutex); - ret = __memory_block_change_state(mem, to_state, from_state_req, - online_type); + ret = __memory_block_change_state_uevent(mem, to_state, from_state_req, + online_type); mutex_unlock(&mem->state_mutex); return ret; @@ -310,22 +346,34 @@ store_mem_state(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct memory_block *mem; + bool offline; int ret = -EINVAL; mem = container_of(dev, struct memory_block, dev); - if (!strncmp(buf, "online_kernel", min_t(int, count, 13))) + lock_device_hotplug(); + + if (!strncmp(buf, "online_kernel", min_t(int, count, 13))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_KERNEL); - else if (!strncmp(buf, "online_movable", min_t(int, count, 14))) + } else if (!strncmp(buf, "online_movable", min_t(int, count, 14))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_MOVABLE); - else if (!strncmp(buf, "online", min_t(int, count, 6))) + } else if (!strncmp(buf, "online", min_t(int, count, 6))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_KEEP); - else if(!strncmp(buf, "offline", min_t(int, count, 7))) + } else if(!strncmp(buf, "offline", min_t(int, count, 7))) { + offline = true; ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + } + if (!ret) + dev->offline = offline; + + unlock_device_hotplug(); if (ret) return ret; @@ -523,6 +571,7 @@ int register_memory(struct memory_block *memory) memory->dev.id = memory->start_section_nr / sections_per_block; memory->dev.release = memory_block_release; memory->dev.groups = memory_memblk_attr_groups; + memory->dev.offline = memory->state == MEM_OFFLINE; error = device_register(&memory->dev); return error; @@ -646,21 +695,6 @@ int unregister_memory_section(struct mem_section *section) } #endif /* CONFIG_MEMORY_HOTREMOVE */ -/* - * offline one memory block. If the memory block has been offlined, do nothing. - */ -int offline_memory_block(struct memory_block *mem) -{ - int ret = 0; - - mutex_lock(&mem->state_mutex); - if (mem->state != MEM_OFFLINE) - ret = __memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); - mutex_unlock(&mem->state_mutex); - - return ret; -} - /* return true if the memory block is offlined, otherwise, return false */ bool is_memblock_offlined(struct memory_block *mem) { diff --git a/drivers/base/platform.c b/drivers/base/platform.c index ed75cf6..6eaa7ab 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -890,7 +890,6 @@ int platform_pm_restore(struct device *dev) static const struct dev_pm_ops platform_dev_pm_ops = { .runtime_suspend = pm_generic_runtime_suspend, .runtime_resume = pm_generic_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, USE_PLATFORM_PM_SLEEP_OPS }; diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 7072404..bfb8955 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2143,7 +2143,6 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->max_off_time_changed = true; genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; - genpd->domain.ops.runtime_idle = pm_generic_runtime_idle; genpd->domain.ops.prepare = pm_genpd_prepare; genpd->domain.ops.suspend = pm_genpd_suspend; genpd->domain.ops.suspend_late = pm_genpd_suspend_late; diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c index bfd898b..5ee030a 100644 --- a/drivers/base/power/generic_ops.c +++ b/drivers/base/power/generic_ops.c @@ -12,29 +12,6 @@ #ifdef CONFIG_PM_RUNTIME /** - * pm_generic_runtime_idle - Generic runtime idle callback for subsystems. - * @dev: Device to handle. - * - * If PM operations are defined for the @dev's driver and they include - * ->runtime_idle(), execute it and return its error code, if nonzero. - * Otherwise, execute pm_runtime_suspend() for the device and return 0. - */ -int pm_generic_runtime_idle(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm && pm->runtime_idle) { - int ret = pm->runtime_idle(dev); - if (ret) - return ret; - } - - pm_runtime_suspend(dev); - return 0; -} -EXPORT_SYMBOL_GPL(pm_generic_runtime_idle); - -/** * pm_generic_runtime_suspend - Generic runtime suspend callback for subsystems. * @dev: Device to suspend. * diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index f0077cb..c8ec186 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -648,14 +648,14 @@ int opp_init_cpufreq_table(struct device *dev, list_for_each_entry(opp, &dev_opp->opp_list, node) { if (opp->available) { - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = opp->rate / 1000; i++; } } mutex_unlock(&dev_opp_list_lock); - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; *table = &freq_table[0]; diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 71671c4..5c1361a 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -42,6 +42,7 @@ #include <linux/export.h> #include <linux/pm_runtime.h> #include <linux/err.h> +#include <trace/events/power.h> #include "power.h" @@ -305,6 +306,7 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, else if (!dev->power.qos) ret = dev_pm_qos_constraints_allocate(dev); + trace_dev_pm_qos_add_request(dev_name(dev), type, value); if (!ret) { req->dev = dev; req->type = type; @@ -349,6 +351,8 @@ static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req, return -EINVAL; } + trace_dev_pm_qos_update_request(dev_name(req->dev), req->type, + new_value); if (curr_value != new_value) ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value); @@ -398,6 +402,8 @@ static int __dev_pm_qos_remove_request(struct dev_pm_qos_request *req) if (IS_ERR_OR_NULL(req->dev->power.qos)) return -ENODEV; + trace_dev_pm_qos_remove_request(dev_name(req->dev), req->type, + PM_QOS_DEFAULT_VALUE); ret = apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE); memset(req, 0, sizeof(*req)); return ret; diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index ef13ad08..268a350 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -293,11 +293,8 @@ static int rpm_idle(struct device *dev, int rpmflags) /* Pending requests need to be canceled. */ dev->power.request = RPM_REQ_NONE; - if (dev->power.no_callbacks) { - /* Assume ->runtime_idle() callback would have suspended. */ - retval = rpm_suspend(dev, rpmflags); + if (dev->power.no_callbacks) goto out; - } /* Carry out an asynchronous or a synchronous idle notification. */ if (rpmflags & RPM_ASYNC) { @@ -306,7 +303,8 @@ static int rpm_idle(struct device *dev, int rpmflags) dev->power.request_pending = true; queue_work(pm_wq, &dev->power.work); } - goto out; + trace_rpm_return_int(dev, _THIS_IP_, 0); + return 0; } dev->power.idle_notification = true; @@ -326,14 +324,14 @@ static int rpm_idle(struct device *dev, int rpmflags) callback = dev->driver->pm->runtime_idle; if (callback) - __rpm_callback(callback, dev); + retval = __rpm_callback(callback, dev); dev->power.idle_notification = false; wake_up_all(&dev->power.wait_queue); out: trace_rpm_return_int(dev, _THIS_IP_, retval); - return retval; + return retval ? retval : rpm_suspend(dev, rpmflags); } /** diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 79715e7..2d56f41 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -659,7 +659,7 @@ void pm_wakeup_event(struct device *dev, unsigned int msec) } EXPORT_SYMBOL_GPL(pm_wakeup_event); -static void print_active_wakeup_sources(void) +void pm_print_active_wakeup_sources(void) { struct wakeup_source *ws; int active = 0; @@ -683,6 +683,7 @@ static void print_active_wakeup_sources(void) last_activity_ws->name); rcu_read_unlock(); } +EXPORT_SYMBOL_GPL(pm_print_active_wakeup_sources); /** * pm_wakeup_pending - Check if power transition in progress should be aborted. @@ -707,8 +708,10 @@ bool pm_wakeup_pending(void) } spin_unlock_irqrestore(&events_lock, flags); - if (ret) - print_active_wakeup_sources(); + if (ret) { + pr_info("PM: Wakeup pending, aborting suspend\n"); + pm_print_active_wakeup_sources(); + } return ret; } diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c index 4f45eee..812f83f 100644 --- a/drivers/clk/x86/clk-lpt.c +++ b/drivers/clk/x86/clk-lpt.c @@ -1,5 +1,5 @@ /* - * Intel Lynxpoint LPSS clocks. + * Intel Low Power Subsystem clocks. * * Copyright (C) 2013, Intel Corporation * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> @@ -18,8 +18,6 @@ #include <linux/platform_data/clk-lpss.h> #include <linux/platform_device.h> -#define PRV_CLOCK_PARAMS 0x800 - static int lpt_clk_probe(struct platform_device *pdev) { struct lpss_clk_data *drvdata; diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index a924408..de4d5d9 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -5,6 +5,7 @@ config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK + select CPU_FREQ_TABLE help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. @@ -18,6 +19,7 @@ config ARM_DT_BL_CPUFREQ config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" depends on ARCH_EXYNOS + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver common part for Samsung @@ -46,6 +48,7 @@ config ARM_EXYNOS5250_CPUFREQ config ARM_EXYNOS5440_CPUFREQ def_bool SOC_EXYNOS5440 depends on HAVE_CLK && PM_OPP && OF + select CPU_FREQ_TABLE help This adds the CPUFreq driver for Samsung EXYNOS5440 SoC. The nature of exynos5440 clock controller is @@ -55,7 +58,6 @@ config ARM_EXYNOS5440_CPUFREQ config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" depends on ARCH_HIGHBANK - select CPU_FREQ_TABLE select GENERIC_CPUFREQ_CPU0 select PM_OPP select REGULATOR @@ -71,6 +73,7 @@ config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6Q cpufreq support" depends on SOC_IMX6Q depends on REGULATOR_ANATOP + select CPU_FREQ_TABLE help This adds cpufreq driver support for Freescale i.MX6Q SOC. @@ -86,6 +89,7 @@ config ARM_INTEGRATOR config ARM_KIRKWOOD_CPUFREQ def_bool ARCH_KIRKWOOD && OF + select CPU_FREQ_TABLE help This adds the CPUFreq driver for Marvell Kirkwood SoCs. @@ -149,6 +153,7 @@ config ARM_S3C2412_CPUFREQ config ARM_S3C2416_CPUFREQ bool "S3C2416 CPU Frequency scaling support" depends on CPU_S3C2416 + select CPU_FREQ_TABLE help This adds the CPUFreq driver for the Samsung S3C2416 and S3C2450 SoC. The S3C2416 supports changing the rate of the @@ -179,6 +184,7 @@ config ARM_S3C2440_CPUFREQ config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410 + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver for Samsung S3C6410 SoC. @@ -205,6 +211,15 @@ config ARM_SA1110_CPUFREQ config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver support for SPEAr SOCs. + +config ARM_TEGRA_CPUFREQ + bool "TEGRA CPUFreq support" + depends on ARCH_TEGRA + select CPU_FREQ_TABLE + default y + help + This adds the CPUFreq driver support for TEGRA SOCs. diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 9c926ca..25ca9db 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -1,6 +1,7 @@ config CPU_FREQ_CBE tristate "CBE frequency scaling" depends on CBE_RAS && PPC_CELL + select CPU_FREQ_TABLE default m help This adds the cpufreq driver for Cell BE processors. @@ -23,3 +24,39 @@ config CPU_FREQ_MAPLE help This adds support for frequency switching on Maple 970FX Evaluation Board and compatible boards (IBM JS2x blades). + +config PPC_CORENET_CPUFREQ + tristate "CPU frequency scaling driver for Freescale E500MC SoCs" + depends on PPC_E500MC && OF && COMMON_CLK + select CPU_FREQ_TABLE + select CLK_PPC_CORENET + help + This adds the CPUFreq driver support for Freescale e500mc, + e5500 and e6500 series SoCs which are capable of changing + the CPU's frequency dynamically. + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on ADB_PMU && PPC32 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on PPC_PMAC && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC_PASEMI_CPUFREQ + bool "Support for PA Semi PWRficient" + depends on PPC_PASEMI + select CPU_FREQ_TABLE + default y + help + This adds the support for frequency switching on PA Semi + PWRficient processors. diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 6bd63d6..e2b6eab 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -132,6 +132,7 @@ config X86_POWERNOW_K8 config X86_AMD_FREQ_SENSITIVITY tristate "AMD frequency sensitivity feedback powersave bias" depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD + select CPU_FREQ_TABLE help This adds AMD-specific powersave bias function to the ondemand governor, which allows it to make more power-conscious frequency diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 6ad0b91..d345b5a 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -76,7 +76,7 @@ obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o -obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o +obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o ################################################################################## # PowerPC platform drivers @@ -84,11 +84,15 @@ obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o +obj-$(CONFIG_PPC_CORENET_CPUFREQ) += ppc-corenet-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o +obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o ################################################################################## # Other platform drivers obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o -obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o +obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index edc089e..3926402 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -70,6 +70,7 @@ struct acpi_cpufreq_data { struct cpufreq_frequency_table *freq_table; unsigned int resume; unsigned int cpu_feature; + cpumask_var_t freqdomain_cpus; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data); @@ -176,6 +177,15 @@ static struct global_attr global_boost = __ATTR(boost, 0644, show_global_boost, store_global_boost); +static ssize_t show_freqdomain_cpus(struct cpufreq_policy *policy, char *buf) +{ + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); + + return cpufreq_show_cpus(data->freqdomain_cpus, buf); +} + +cpufreq_freq_attr_ro(freqdomain_cpus); + #ifdef CONFIG_X86_ACPI_CPUFREQ_CPB static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, size_t count) @@ -232,7 +242,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) perf = data->acpi_data; for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) + if (msr == perf->states[data->freq_table[i].driver_data].status) return data->freq_table[i].frequency; } return data->freq_table[0].frequency; @@ -442,7 +452,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, goto out; } - next_perf_state = data->freq_table[next_state].index; + next_perf_state = data->freq_table[next_state].driver_data; if (perf->state == next_perf_state) { if (unlikely(data->resume)) { pr_debug("Called after resume, resetting to P%d\n", @@ -494,12 +504,14 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, pr_debug("acpi_cpufreq_target failed (%d)\n", policy->cpu); result = -EAGAIN; - goto out; + freqs.new = freqs.old; } } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - perf->state = next_perf_state; + + if (!result) + perf->state = next_perf_state; out: return result; @@ -702,6 +714,11 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (!data) return -ENOMEM; + if (!zalloc_cpumask_var(&data->freqdomain_cpus, GFP_KERNEL)) { + result = -ENOMEM; + goto err_free; + } + data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu); per_cpu(acfreq_data, cpu) = data; @@ -710,7 +727,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) result = acpi_processor_register_performance(data->acpi_data, cpu); if (result) - goto err_free; + goto err_free_mask; perf = data->acpi_data; policy->shared_type = perf->shared_type; @@ -723,6 +740,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { cpumask_copy(policy->cpus, perf->shared_cpu_map); } + cpumask_copy(data->freqdomain_cpus, perf->shared_cpu_map); #ifdef CONFIG_SMP dmi_check_system(sw_any_bug_dmi_table); @@ -734,6 +752,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) { cpumask_clear(policy->cpus); cpumask_set_cpu(cpu, policy->cpus); + cpumask_copy(data->freqdomain_cpus, cpu_sibling_mask(cpu)); policy->shared_type = CPUFREQ_SHARED_TYPE_HW; pr_info_once(PFX "overriding BIOS provided _PSD data\n"); } @@ -811,7 +830,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->freq_table[valid_states-1].frequency / 1000) continue; - data->freq_table[valid_states].index = i; + data->freq_table[valid_states].driver_data = i; data->freq_table[valid_states].frequency = perf->states[i].core_frequency * 1000; valid_states++; @@ -868,6 +887,8 @@ err_freqfree: kfree(data->freq_table); err_unreg: acpi_processor_unregister_performance(perf, cpu); +err_free_mask: + free_cpumask_var(data->freqdomain_cpus); err_free: kfree(data); per_cpu(acfreq_data, cpu) = NULL; @@ -886,6 +907,7 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) per_cpu(acfreq_data, policy->cpu) = NULL; acpi_processor_unregister_performance(data->acpi_data, policy->cpu); + free_cpumask_var(data->freqdomain_cpus); kfree(data->freq_table); kfree(data); } @@ -906,6 +928,7 @@ static int acpi_cpufreq_resume(struct cpufreq_policy *policy) static struct freq_attr *acpi_cpufreq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, + &freqdomain_cpus, NULL, /* this is a placeholder for cpb, do not remove */ NULL, }; @@ -947,7 +970,7 @@ static void __init acpi_cpufreq_boost_init(void) /* We create the boost file in any case, though for systems without * hardware support it will be read-only and hardwired to return 0. */ - if (sysfs_create_file(cpufreq_global_kobject, &(global_boost.attr))) + if (cpufreq_sysfs_create_file(&(global_boost.attr))) pr_warn(PFX "could not register global boost sysfs file\n"); else pr_debug("registered global boost sysfs file\n"); @@ -955,7 +978,7 @@ static void __init acpi_cpufreq_boost_init(void) static void __exit acpi_cpufreq_boost_exit(void) { - sysfs_remove_file(cpufreq_global_kobject, &(global_boost.attr)); + cpufreq_sysfs_remove_file(&(global_boost.attr)); if (msrs) { unregister_cpu_notifier(&boost_nb); @@ -1034,4 +1057,11 @@ static const struct x86_cpu_id acpi_cpufreq_ids[] = { }; MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); +static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, }, + {ACPI_PROCESSOR_DEVICE_HID, }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, processor_device_ids); + MODULE_ALIAS("acpi"); diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 5d7f53f..3549f07 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -84,11 +84,9 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy, ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000); if (ret) { pr_err("clk_set_rate failed: %d\n", ret); - return ret; + freqs.new = freqs.old; } - policy->cur = freqs.new; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c index 995511e80..9cdbbd2 100644 --- a/drivers/cpufreq/blackfin-cpufreq.c +++ b/drivers/cpufreq/blackfin-cpufreq.c @@ -20,23 +20,23 @@ /* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ +/* .driver_data is the entry in the auxiliary dpm_state_table[] */ static struct cpufreq_frequency_table bfin_freq_table[] = { { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, { .frequency = CPUFREQ_TABLE_END, - .index = 1, + .driver_data = 1, }, { .frequency = CPUFREQ_TABLE_END, - .index = 2, + .driver_data = 2, }, { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 2d53f47..6a015ad 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -3,6 +3,7 @@ * * Copyright (C) 2001 Russell King * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * (C) 2013 Viresh Kumar <viresh.kumar@linaro.org> * * Oct 2005 - Ashok Raj <ashok.raj@intel.com> * Added handling for CPU hotplug @@ -12,12 +13,13 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <asm/cputime.h> #include <linux/kernel.h> +#include <linux/kernel_stat.h> #include <linux/module.h> #include <linux/init.h> #include <linux/notifier.h> @@ -25,6 +27,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <linux/tick.h> #include <linux/device.h> #include <linux/slab.h> #include <linux/cpu.h> @@ -41,11 +44,13 @@ */ static struct cpufreq_driver *cpufreq_driver; static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); +static DEFINE_RWLOCK(cpufreq_driver_lock); +static DEFINE_MUTEX(cpufreq_governor_lock); + #ifdef CONFIG_HOTPLUG_CPU /* This one keeps track of the previously set governor of a removed CPU */ static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif -static DEFINE_RWLOCK(cpufreq_driver_lock); /* * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure @@ -132,6 +137,51 @@ bool have_governor_per_policy(void) { return cpufreq_driver->have_governor_per_policy; } +EXPORT_SYMBOL_GPL(have_governor_per_policy); + +struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) +{ + if (have_governor_per_policy()) + return &policy->kobj; + else + return cpufreq_global_kobject; +} +EXPORT_SYMBOL_GPL(get_governor_parent_kobj); + +static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) +{ + u64 idle_time; + u64 cur_wall_time; + u64 busy_time; + + cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); + + busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; + + idle_time = cur_wall_time - busy_time; + if (wall) + *wall = cputime_to_usecs(cur_wall_time); + + return cputime_to_usecs(idle_time); +} + +u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) +{ + u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); + + if (idle_time == -1ULL) + return get_cpu_idle_time_jiffy(cpu, wall); + else if (!io_busy) + idle_time += get_cpu_iowait_time_us(cpu, wall); + + return idle_time; +} +EXPORT_SYMBOL_GPL(get_cpu_idle_time); static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) { @@ -150,7 +200,6 @@ static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) if (!try_module_get(cpufreq_driver->owner)) goto err_out_unlock; - /* get the CPU */ data = per_cpu(cpufreq_cpu_data, cpu); @@ -220,7 +269,7 @@ static void cpufreq_cpu_put_sysfs(struct cpufreq_policy *data) */ #ifndef CONFIG_SMP static unsigned long l_p_j_ref; -static unsigned int l_p_j_ref_freq; +static unsigned int l_p_j_ref_freq; static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) { @@ -233,7 +282,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) pr_debug("saving %lu as reference value for loops_per_jiffy; " "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq); } - if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) || + if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) || (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) { loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, ci->new); @@ -248,8 +297,7 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) } #endif - -void __cpufreq_notify_transition(struct cpufreq_policy *policy, +static void __cpufreq_notify_transition(struct cpufreq_policy *policy, struct cpufreq_freqs *freqs, unsigned int state) { BUG_ON(irqs_disabled()); @@ -264,6 +312,12 @@ void __cpufreq_notify_transition(struct cpufreq_policy *policy, switch (state) { case CPUFREQ_PRECHANGE: + if (WARN(policy->transition_ongoing, + "In middle of another frequency transition\n")) + return; + + policy->transition_ongoing = true; + /* detect if the driver reported a value as "old frequency" * which is not equal to what the cpufreq core thinks is * "old frequency". @@ -283,6 +337,12 @@ void __cpufreq_notify_transition(struct cpufreq_policy *policy, break; case CPUFREQ_POSTCHANGE: + if (WARN(!policy->transition_ongoing, + "No frequency transition in progress\n")) + return; + + policy->transition_ongoing = false; + adjust_jiffies(CPUFREQ_POSTCHANGE, freqs); pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new, (unsigned long)freqs->cpu); @@ -294,6 +354,7 @@ void __cpufreq_notify_transition(struct cpufreq_policy *policy, break; } } + /** * cpufreq_notify_transition - call notifier chain and adjust_jiffies * on frequency transition. @@ -311,7 +372,6 @@ void cpufreq_notify_transition(struct cpufreq_policy *policy, EXPORT_SYMBOL_GPL(cpufreq_notify_transition); - /********************************************************************* * SYSFS INTERFACE * *********************************************************************/ @@ -376,7 +436,6 @@ out: return err; } - /** * cpufreq_per_cpu_attr_read() / show_##file_name() - * print out cpufreq information @@ -441,7 +500,6 @@ static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, return sprintf(buf, "%u\n", cur_freq); } - /** * show_scaling_governor - show the current policy for the specified CPU */ @@ -457,7 +515,6 @@ static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) return -EINVAL; } - /** * store_scaling_governor - store policy for the specified CPU */ @@ -480,8 +537,10 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy, &new_policy.governor)) return -EINVAL; - /* Do not use cpufreq_set_policy here or the user_policy.max - will be wrongly overridden */ + /* + * Do not use cpufreq_set_policy here or the user_policy.max + * will be wrongly overridden + */ ret = __cpufreq_set_policy(policy, &new_policy); policy->user_policy.policy = policy->policy; @@ -526,7 +585,7 @@ out: return i; } -static ssize_t show_cpus(const struct cpumask *mask, char *buf) +ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf) { ssize_t i = 0; unsigned int cpu; @@ -541,6 +600,7 @@ static ssize_t show_cpus(const struct cpumask *mask, char *buf) i += sprintf(&buf[i], "\n"); return i; } +EXPORT_SYMBOL_GPL(cpufreq_show_cpus); /** * show_related_cpus - show the CPUs affected by each transition even if @@ -548,7 +608,7 @@ static ssize_t show_cpus(const struct cpumask *mask, char *buf) */ static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) { - return show_cpus(policy->related_cpus, buf); + return cpufreq_show_cpus(policy->related_cpus, buf); } /** @@ -556,7 +616,7 @@ static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) */ static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf) { - return show_cpus(policy->cpus, buf); + return cpufreq_show_cpus(policy->cpus, buf); } static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, @@ -630,9 +690,6 @@ static struct attribute *default_attrs[] = { NULL }; -struct kobject *cpufreq_global_kobject; -EXPORT_SYMBOL(cpufreq_global_kobject); - #define to_policy(k) container_of(k, struct cpufreq_policy, kobj) #define to_attr(a) container_of(a, struct freq_attr, attr) @@ -703,6 +760,49 @@ static struct kobj_type ktype_cpufreq = { .release = cpufreq_sysfs_release, }; +struct kobject *cpufreq_global_kobject; +EXPORT_SYMBOL(cpufreq_global_kobject); + +static int cpufreq_global_kobject_usage; + +int cpufreq_get_global_kobject(void) +{ + if (!cpufreq_global_kobject_usage++) + return kobject_add(cpufreq_global_kobject, + &cpu_subsys.dev_root->kobj, "%s", "cpufreq"); + + return 0; +} +EXPORT_SYMBOL(cpufreq_get_global_kobject); + +void cpufreq_put_global_kobject(void) +{ + if (!--cpufreq_global_kobject_usage) + kobject_del(cpufreq_global_kobject); +} +EXPORT_SYMBOL(cpufreq_put_global_kobject); + +int cpufreq_sysfs_create_file(const struct attribute *attr) +{ + int ret = cpufreq_get_global_kobject(); + + if (!ret) { + ret = sysfs_create_file(cpufreq_global_kobject, attr); + if (ret) + cpufreq_put_global_kobject(); + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_sysfs_create_file); + +void cpufreq_sysfs_remove_file(const struct attribute *attr) +{ + sysfs_remove_file(cpufreq_global_kobject, attr); + cpufreq_put_global_kobject(); +} +EXPORT_SYMBOL(cpufreq_sysfs_remove_file); + /* symlink affected CPUs */ static int cpufreq_add_dev_symlink(unsigned int cpu, struct cpufreq_policy *policy) @@ -1005,7 +1105,8 @@ static void update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu) * Caller should already have policy_rwsem in write mode for this CPU. * This routine frees the rwsem before returning. */ -static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) +static int __cpufreq_remove_dev(struct device *dev, + struct subsys_interface *sif) { unsigned int cpu = dev->id, ret, cpus; unsigned long flags; @@ -1112,7 +1213,6 @@ static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif return 0; } - static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) { unsigned int cpu = dev->id; @@ -1125,7 +1225,6 @@ static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) return retval; } - static void handle_update(struct work_struct *work) { struct cpufreq_policy *policy = @@ -1136,7 +1235,8 @@ static void handle_update(struct work_struct *work) } /** - * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're in deep trouble. + * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're + * in deep trouble. * @cpu: cpu number * @old_freq: CPU frequency the kernel thinks the CPU runs at * @new_freq: CPU frequency the CPU actually runs at @@ -1151,7 +1251,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, struct cpufreq_freqs freqs; unsigned long flags; - pr_debug("Warning: CPU frequency out of sync: cpufreq and timing " "core thinks of %u, is %u kHz.\n", old_freq, new_freq); @@ -1166,7 +1265,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); } - /** * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur * @cpu: CPU number @@ -1212,7 +1310,6 @@ unsigned int cpufreq_quick_get_max(unsigned int cpu) } EXPORT_SYMBOL(cpufreq_quick_get_max); - static unsigned int __cpufreq_get(unsigned int cpu) { struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); @@ -1271,7 +1368,6 @@ static struct subsys_interface cpufreq_interface = { .remove_dev = cpufreq_remove_dev, }; - /** * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. * @@ -1408,11 +1504,10 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) } EXPORT_SYMBOL(cpufreq_register_notifier); - /** * cpufreq_unregister_notifier - unregister a driver with cpufreq * @nb: notifier block to be unregistered - * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER + * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER * * Remove a driver from the CPU frequency notifier list. * @@ -1448,7 +1543,6 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier); * GOVERNORS * *********************************************************************/ - int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) @@ -1458,6 +1552,8 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, if (cpufreq_disabled()) return -ENODEV; + if (policy->transition_ongoing) + return -EBUSY; /* Make sure that target_freq is within supported range */ if (target_freq > policy->max) @@ -1484,10 +1580,6 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, { int ret = -EINVAL; - policy = cpufreq_cpu_get(policy->cpu); - if (!policy) - goto no_policy; - if (unlikely(lock_policy_rwsem_write(policy->cpu))) goto fail; @@ -1496,30 +1588,19 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, unlock_policy_rwsem_write(policy->cpu); fail: - cpufreq_cpu_put(policy); -no_policy: return ret; } EXPORT_SYMBOL_GPL(cpufreq_driver_target); int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu) { - int ret = 0; - if (cpufreq_disabled()) - return ret; + return 0; if (!cpufreq_driver->getavg) return 0; - policy = cpufreq_cpu_get(policy->cpu); - if (!policy) - return -EINVAL; - - ret = cpufreq_driver->getavg(policy, cpu); - - cpufreq_cpu_put(policy); - return ret; + return cpufreq_driver->getavg(policy, cpu); } EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg); @@ -1562,6 +1643,21 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, pr_debug("__cpufreq_governor for CPU %u, event %u\n", policy->cpu, event); + + mutex_lock(&cpufreq_governor_lock); + if ((!policy->governor_enabled && (event == CPUFREQ_GOV_STOP)) || + (policy->governor_enabled && (event == CPUFREQ_GOV_START))) { + mutex_unlock(&cpufreq_governor_lock); + return -EBUSY; + } + + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = false; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = true; + + mutex_unlock(&cpufreq_governor_lock); + ret = policy->governor->governor(policy, event); if (!ret) { @@ -1569,6 +1665,14 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, policy->governor->initialized++; else if (event == CPUFREQ_GOV_POLICY_EXIT) policy->governor->initialized--; + } else { + /* Restore original values */ + mutex_lock(&cpufreq_governor_lock); + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = true; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = false; + mutex_unlock(&cpufreq_governor_lock); } /* we keep one module reference alive for @@ -1581,7 +1685,6 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, return ret; } - int cpufreq_register_governor(struct cpufreq_governor *governor) { int err; @@ -1606,7 +1709,6 @@ int cpufreq_register_governor(struct cpufreq_governor *governor) } EXPORT_SYMBOL_GPL(cpufreq_register_governor); - void cpufreq_unregister_governor(struct cpufreq_governor *governor) { #ifdef CONFIG_HOTPLUG_CPU @@ -1636,7 +1738,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor) EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); - /********************************************************************* * POLICY INTERFACE * *********************************************************************/ @@ -1665,7 +1766,6 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) } EXPORT_SYMBOL(cpufreq_get_policy); - /* * data : current policy. * policy : policy to be set. @@ -1699,8 +1799,10 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, blocking_notifier_call_chain(&cpufreq_policy_notifier_list, CPUFREQ_INCOMPATIBLE, policy); - /* verify the cpu speed can be set within this limit, - which might be different to the first one */ + /* + * verify the cpu speed can be set within this limit, which might be + * different to the first one + */ ret = cpufreq_driver->verify(policy); if (ret) goto error_out; @@ -1802,8 +1904,10 @@ int cpufreq_update_policy(unsigned int cpu) policy.policy = data->user_policy.policy; policy.governor = data->user_policy.governor; - /* BIOS might change freq behind our back - -> ask driver for current freq and notify governors about a change */ + /* + * BIOS might change freq behind our back + * -> ask driver for current freq and notify governors about a change + */ if (cpufreq_driver->get) { policy.cur = cpufreq_driver->get(cpu); if (!data->cur) { @@ -1852,7 +1956,7 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, } static struct notifier_block __refdata cpufreq_cpu_notifier = { - .notifier_call = cpufreq_cpu_callback, + .notifier_call = cpufreq_cpu_callback, }; /********************************************************************* @@ -1864,7 +1968,7 @@ static struct notifier_block __refdata cpufreq_cpu_notifier = { * @driver_data: A struct cpufreq_driver containing the values# * submitted by the CPU Frequency driver. * - * Registers a CPU Frequency driver to this core code. This code + * Registers a CPU Frequency driver to this core code. This code * returns zero on success, -EBUSY when another driver got here first * (and isn't unregistered in the meantime). * @@ -1931,11 +2035,10 @@ err_null_driver: } EXPORT_SYMBOL_GPL(cpufreq_register_driver); - /** * cpufreq_unregister_driver - unregister the current CPUFreq driver * - * Unregister the current CPUFreq driver. Only call this if you have + * Unregister the current CPUFreq driver. Only call this if you have * the right to do so, i.e. if you have succeeded in initialising before! * Returns zero if successful, and -EINVAL if the cpufreq_driver is * currently not initialised. @@ -1972,7 +2075,7 @@ static int __init cpufreq_core_init(void) init_rwsem(&per_cpu(cpu_policy_rwsem, cpu)); } - cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj); + cpufreq_global_kobject = kobject_create(); BUG_ON(!cpufreq_global_kobject); register_syscore_ops(&cpufreq_syscore_ops); diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index dc9b72e..4645876 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -23,21 +23,12 @@ #include <linux/kernel_stat.h> #include <linux/mutex.h> #include <linux/slab.h> -#include <linux/tick.h> #include <linux/types.h> #include <linux/workqueue.h> #include <linux/cpu.h> #include "cpufreq_governor.h" -static struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) -{ - if (have_governor_per_policy()) - return &policy->kobj; - else - return cpufreq_global_kobject; -} - static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data) { if (have_governor_per_policy()) @@ -46,41 +37,6 @@ static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data) return dbs_data->cdata->attr_group_gov_sys; } -static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) -{ - u64 idle_time; - u64 cur_wall_time; - u64 busy_time; - - cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); - - busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; - - idle_time = cur_wall_time - busy_time; - if (wall) - *wall = cputime_to_usecs(cur_wall_time); - - return cputime_to_usecs(idle_time); -} - -u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) -{ - u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); - - if (idle_time == -1ULL) - return get_cpu_idle_time_jiffy(cpu, wall); - else if (!io_busy) - idle_time += get_cpu_iowait_time_us(cpu, wall); - - return idle_time; -} -EXPORT_SYMBOL_GPL(get_cpu_idle_time); - void dbs_check_cpu(struct dbs_data *dbs_data, int cpu) { struct cpu_dbs_common_info *cdbs = dbs_data->cdata->get_cpu_cdbs(cpu); @@ -278,6 +234,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, return rc; } + if (!have_governor_per_policy()) + WARN_ON(cpufreq_get_global_kobject()); + rc = sysfs_create_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); if (rc) { @@ -316,6 +275,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, sysfs_remove_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); + if (!have_governor_per_policy()) + cpufreq_put_global_kobject(); + if ((dbs_data->cdata->governor == GOV_CONSERVATIVE) && (policy->governor->initialized == 1)) { struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; @@ -404,6 +366,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, mutex_lock(&dbs_data->mutex); mutex_destroy(&cpu_cdbs->timer_mutex); + cpu_cdbs->cur_policy = NULL; mutex_unlock(&dbs_data->mutex); diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index e16a961..6663ec3 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -81,7 +81,7 @@ static ssize_t show_##file_name##_gov_sys \ return sprintf(buf, "%u\n", tuners->file_name); \ } \ \ -static ssize_t show_##file_name##_gov_pol \ +static ssize_t show_##file_name##_gov_pol \ (struct cpufreq_policy *policy, char *buf) \ { \ struct dbs_data *dbs_data = policy->governor_data; \ @@ -91,7 +91,7 @@ static ssize_t show_##file_name##_gov_pol \ #define store_one(_gov, file_name) \ static ssize_t store_##file_name##_gov_sys \ -(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \ +(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \ { \ struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \ return store_##file_name(dbs_data, buf, count); \ @@ -256,7 +256,6 @@ static ssize_t show_sampling_rate_min_gov_pol \ return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \ } -u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy); void dbs_check_cpu(struct dbs_data *dbs_data, int cpu); bool need_load_eval(struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate); diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c index ceee068..9fef7d6 100644 --- a/drivers/cpufreq/cpufreq_performance.c +++ b/drivers/cpufreq/cpufreq_performance.c @@ -17,7 +17,6 @@ #include <linux/cpufreq.h> #include <linux/init.h> - static int cpufreq_governor_performance(struct cpufreq_policy *policy, unsigned int event) { @@ -44,19 +43,16 @@ struct cpufreq_governor cpufreq_gov_performance = { .owner = THIS_MODULE, }; - static int __init cpufreq_gov_performance_init(void) { return cpufreq_register_governor(&cpufreq_gov_performance); } - static void __exit cpufreq_gov_performance_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_performance); } - MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("CPUfreq policy governor 'performance'"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c index 2d948a1..32109a1 100644 --- a/drivers/cpufreq/cpufreq_powersave.c +++ b/drivers/cpufreq/cpufreq_powersave.c @@ -1,7 +1,7 @@ /* - * linux/drivers/cpufreq/cpufreq_powersave.c + * linux/drivers/cpufreq/cpufreq_powersave.c * - * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> * * * This program is free software; you can redistribute it and/or modify @@ -48,13 +48,11 @@ static int __init cpufreq_gov_powersave_init(void) return cpufreq_register_governor(&cpufreq_gov_powersave); } - static void __exit cpufreq_gov_powersave_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_powersave); } - MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("CPUfreq policy governor 'powersave'"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index fb65dec..cd9e817 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -27,7 +27,7 @@ static spinlock_t cpufreq_stats_lock; struct cpufreq_stats { unsigned int cpu; unsigned int total_trans; - unsigned long long last_time; + unsigned long long last_time; unsigned int max_state; unsigned int state_num; unsigned int last_index; @@ -116,7 +116,7 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ", stat->freq_table[i]); - for (j = 0; j < stat->state_num; j++) { + for (j = 0; j < stat->state_num; j++) { if (len >= PAGE_SIZE) break; len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", @@ -349,6 +349,7 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_ONLINE: + case CPU_ONLINE_FROZEN: cpufreq_update_policy(cpu); break; case CPU_DOWN_PREPARE: diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index bbeb9c0..0307809 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -13,55 +13,13 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> #include <linux/cpufreq.h> -#include <linux/cpu.h> -#include <linux/types.h> -#include <linux/fs.h> -#include <linux/sysfs.h> +#include <linux/init.h> +#include <linux/module.h> #include <linux/mutex.h> -/** - * A few values needed by the userspace governor - */ -static DEFINE_PER_CPU(unsigned int, cpu_max_freq); -static DEFINE_PER_CPU(unsigned int, cpu_min_freq); -static DEFINE_PER_CPU(unsigned int, cpu_cur_freq); /* current CPU freq */ -static DEFINE_PER_CPU(unsigned int, cpu_set_freq); /* CPU freq desired by - userspace */ static DEFINE_PER_CPU(unsigned int, cpu_is_managed); - static DEFINE_MUTEX(userspace_mutex); -static int cpus_using_userspace_governor; - -/* keep track of frequency transitions */ -static int -userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - - if (!per_cpu(cpu_is_managed, freq->cpu)) - return 0; - - if (val == CPUFREQ_POSTCHANGE) { - pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n", - freq->cpu, freq->new); - per_cpu(cpu_cur_freq, freq->cpu) = freq->new; - } - - return 0; -} - -static struct notifier_block userspace_cpufreq_notifier_block = { - .notifier_call = userspace_cpufreq_notifier -}; - /** * cpufreq_set - set the CPU frequency @@ -80,13 +38,6 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) if (!per_cpu(cpu_is_managed, policy->cpu)) goto err; - per_cpu(cpu_set_freq, policy->cpu) = freq; - - if (freq < per_cpu(cpu_min_freq, policy->cpu)) - freq = per_cpu(cpu_min_freq, policy->cpu); - if (freq > per_cpu(cpu_max_freq, policy->cpu)) - freq = per_cpu(cpu_max_freq, policy->cpu); - /* * We're safe from concurrent calls to ->target() here * as we hold the userspace_mutex lock. If we were calling @@ -104,10 +55,9 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) return ret; } - static ssize_t show_speed(struct cpufreq_policy *policy, char *buf) { - return sprintf(buf, "%u\n", per_cpu(cpu_cur_freq, policy->cpu)); + return sprintf(buf, "%u\n", policy->cur); } static int cpufreq_governor_userspace(struct cpufreq_policy *policy, @@ -119,73 +69,37 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, switch (event) { case CPUFREQ_GOV_START: BUG_ON(!policy->cur); - mutex_lock(&userspace_mutex); - - if (cpus_using_userspace_governor == 0) { - cpufreq_register_notifier( - &userspace_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - } - cpus_using_userspace_governor++; + pr_debug("started managing cpu %u\n", cpu); + mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 1; - per_cpu(cpu_min_freq, cpu) = policy->min; - per_cpu(cpu_max_freq, cpu) = policy->max; - per_cpu(cpu_cur_freq, cpu) = policy->cur; - per_cpu(cpu_set_freq, cpu) = policy->cur; - pr_debug("managing cpu %u started " - "(%u - %u kHz, currently %u kHz)\n", - cpu, - per_cpu(cpu_min_freq, cpu), - per_cpu(cpu_max_freq, cpu), - per_cpu(cpu_cur_freq, cpu)); - mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_STOP: - mutex_lock(&userspace_mutex); - cpus_using_userspace_governor--; - if (cpus_using_userspace_governor == 0) { - cpufreq_unregister_notifier( - &userspace_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - } + pr_debug("managing cpu %u stopped\n", cpu); + mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 0; - per_cpu(cpu_min_freq, cpu) = 0; - per_cpu(cpu_max_freq, cpu) = 0; - per_cpu(cpu_set_freq, cpu) = 0; - pr_debug("managing cpu %u stopped\n", cpu); mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_LIMITS: mutex_lock(&userspace_mutex); - pr_debug("limit event for cpu %u: %u - %u kHz, " - "currently %u kHz, last set to %u kHz\n", + pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n", cpu, policy->min, policy->max, - per_cpu(cpu_cur_freq, cpu), - per_cpu(cpu_set_freq, cpu)); - if (policy->max < per_cpu(cpu_set_freq, cpu)) { + policy->cur); + + if (policy->max < policy->cur) __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); - } else if (policy->min > per_cpu(cpu_set_freq, cpu)) { + else if (policy->min > policy->cur) __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); - } else { - __cpufreq_driver_target(policy, - per_cpu(cpu_set_freq, cpu), - CPUFREQ_RELATION_L); - } - per_cpu(cpu_min_freq, cpu) = policy->min; - per_cpu(cpu_max_freq, cpu) = policy->max; - per_cpu(cpu_cur_freq, cpu) = policy->cur; mutex_unlock(&userspace_mutex); break; } return rc; } - #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE static #endif @@ -202,13 +116,11 @@ static int __init cpufreq_gov_userspace_init(void) return cpufreq_register_governor(&cpufreq_gov_userspace); } - static void __exit cpufreq_gov_userspace_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_userspace); } - MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>, " "Russell King <rmk@arm.linux.org.uk>"); MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'"); diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c index c33c76c..551dd65 100644 --- a/drivers/cpufreq/davinci-cpufreq.c +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -114,6 +114,9 @@ static int davinci_target(struct cpufreq_policy *policy, pdata->set_voltage(idx); out: + if (ret) + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index 6ec6539..1fdb02b 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -57,13 +57,13 @@ static int dbx500_cpufreq_target(struct cpufreq_policy *policy, if (ret) { pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n", freqs.new * 1000, ret); - return ret; + freqs.new = freqs.old; } /* post change notification */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu) diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 37380fb..a60efae 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -161,6 +161,9 @@ postchange: current_multiplier); } #endif + if (err) + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return err; } @@ -188,7 +191,7 @@ static int eps_target(struct cpufreq_policy *policy, } /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; + dest_state = centaur->freq_table[newstate].driver_data & 0xffff; ret = eps_set_state(centaur, policy, dest_state); if (ret) printk(KERN_ERR "eps: Timeout!\n"); @@ -380,9 +383,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy) f_table = ¢aur->freq_table[0]; if (brand != EPS_BRAND_C7M) { f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[0].driver_data = (min_multiplier << 8) | min_voltage; f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[1].driver_data = (max_multiplier << 8) | max_voltage; f_table[2].frequency = CPUFREQ_TABLE_END; } else { k = 0; @@ -391,7 +394,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) for (i = min_multiplier; i <= max_multiplier; i++) { voltage = (k * step) / 256 + min_voltage; f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; + f_table[k].driver_data = (i << 8) | voltage; k++; } f_table[k].frequency = CPUFREQ_TABLE_END; diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index 475b4f6..0d32f02 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -113,7 +113,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } @@ -123,14 +124,19 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, safe_arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } exynos_info->set_freq(old_index, index); +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto out; + /* When the new frequency is lower than current frequency */ if ((freqs.new < freqs.old) || ((freqs.new > freqs.old) && safe_arm_volt)) { diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index d7a7966..f0d8741 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -34,8 +34,8 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, continue; } - pr_debug("table entry %u: %u kHz, %u index\n", - i, freq, table[i].index); + pr_debug("table entry %u: %u kHz, %u driver_data\n", + i, freq, table[i].driver_data); if (freq < min_freq) min_freq = freq; if (freq > max_freq) @@ -97,11 +97,11 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, unsigned int *index) { struct cpufreq_frequency_table optimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; struct cpufreq_frequency_table suboptimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; unsigned int i; @@ -129,12 +129,12 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq <= target_freq) { if (freq >= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq <= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; @@ -142,26 +142,26 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq >= target_freq) { if (freq <= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq >= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; } } - if (optimal.index > i) { - if (suboptimal.index > i) + if (optimal.driver_data > i) { + if (suboptimal.driver_data > i) return -EINVAL; - *index = suboptimal.index; + *index = suboptimal.driver_data; } else - *index = optimal.index; + *index = optimal.driver_data; pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency, - table[*index].index); + table[*index].driver_data); return 0; } diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index c0075db..573c14e 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -326,7 +326,7 @@ acpi_cpufreq_cpu_init ( /* table init */ for (i = 0; i <= data->acpi_data.state_count; i++) { - data->freq_table[i].index = i; + data->freq_table[i].driver_data = i; if (i < data->acpi_data.state_count) { data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index b78bc35..e37cdae 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -68,8 +68,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -86,13 +84,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old / 1000, freqs.new / 1000, volt / 1000); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (freqs.new > freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); if (ret) { dev_err(cpu_dev, "failed to scale vddarm up: %d\n", ret); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* @@ -145,15 +146,18 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* scaling down? scale voltage after frequency */ if (freqs.new < freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); - if (ret) + if (ret) { dev_warn(cpu_dev, "failed to scale vddarm down: %d\n", ret); + ret = 0; + } if (freqs.old == FREQ_1P2_GHZ / 1000) { regulator_set_voltage_tol(pu_reg, @@ -163,9 +167,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, } } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static int imx6q_cpufreq_init(struct cpufreq_policy *policy) diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index b2644af..c233ea6 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -59,7 +59,7 @@ static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; - unsigned int state = kirkwood_freq_table[index].index; + unsigned int state = kirkwood_freq_table[index].driver_data; unsigned long reg; freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index b448638..b6a0a7a 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -254,7 +254,7 @@ static void longhaul_setstate(struct cpufreq_policy *policy, u32 bm_timeout = 1000; unsigned int dir = 0; - mults_index = longhaul_table[table_index].index; + mults_index = longhaul_table[table_index].driver_data; /* Safety precautions */ mult = mults[mults_index & 0x1f]; if (mult == -1) @@ -487,7 +487,7 @@ static int __cpuinit longhaul_get_ranges(void) if (ratio > maxmult || ratio < minmult) continue; longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; + longhaul_table[k].driver_data = j; k++; } if (k <= 1) { @@ -508,8 +508,8 @@ static int __cpuinit longhaul_get_ranges(void) if (min_i != j) { swap(longhaul_table[j].frequency, longhaul_table[min_i].frequency); - swap(longhaul_table[j].index, - longhaul_table[min_i].index); + swap(longhaul_table[j].driver_data, + longhaul_table[min_i].driver_data); } } @@ -517,7 +517,7 @@ static int __cpuinit longhaul_get_ranges(void) /* Find index we are running on */ for (j = 0; j < k; j++) { - if (mults[longhaul_table[j].index & 0x1f] == mult) { + if (mults[longhaul_table[j].driver_data & 0x1f] == mult) { longhaul_index = j; break; } @@ -613,7 +613,7 @@ static void __cpuinit longhaul_setup_voltagescaling(void) pos = (speed - min_vid_speed) / kHz_step + minvid.pos; else pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; + longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); @@ -656,12 +656,12 @@ static int longhaul_target(struct cpufreq_policy *policy, * this in hardware, C3 is old and we need to do this * in software. */ i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8); + current_vid = (longhaul_table[longhaul_index].driver_data >> 8); current_vid &= 0x1f; if (table_index > longhaul_index) dir = 1; while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; + vid = (longhaul_table[i].driver_data >> 8) & 0x1f; if (vid != current_vid) { longhaul_setstate(policy, i); current_vid = vid; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index d539127..bb838b9 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -72,7 +72,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, freq = ((cpu_clock_freq / 1000) * - loongson2_clockmod_table[newstate].index) / 8; + loongson2_clockmod_table[newstate].driver_data) / 8; if (freq < policy->min || freq > policy->max) return -EINVAL; diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 0279d18..29468a5 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -93,9 +93,6 @@ static int omap_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new && policy->cur == freqs.new) return ret; - /* notifiers */ - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - freq = freqs.new * 1000; ret = clk_round_rate(mpu_clk, freq); if (IS_ERR_VALUE(ret)) { @@ -125,6 +122,9 @@ static int omap_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old ? volt_old / 1000 : -1, freqs.new / 1000, volt ? volt / 1000 : -1); + /* notifiers */ + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (mpu_reg && (freqs.new > freqs.old)) { r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 421ef37..9ee7817 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -118,7 +118,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, return -EINVAL; freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; + freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8; if (freqs.new == freqs.old) return 0; @@ -131,7 +131,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); + cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data); /* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c new file mode 100644 index 0000000..b704da4 --- /dev/null +++ b/drivers/cpufreq/pasemi-cpufreq.c @@ -0,0 +1,331 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Authors: Egor Martovetsky <egor@pasemi.com> + * Olof Johansson <olof@lixom.net> + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/cpufreq.h> +#include <linux/timer.h> +#include <linux/module.h> + +#include <asm/hw_irq.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/smp.h> + +#define SDCASR_REG 0x0100 +#define SDCASR_REG_STRIDE 0x1000 +#define SDCPWR_CFGA0_REG 0x0100 +#define SDCPWR_PWST0_REG 0x0000 +#define SDCPWR_GIZTIME_REG 0x0440 + +/* SDCPWR_GIZTIME_REG fields */ +#define SDCPWR_GIZTIME_GR 0x80000000 +#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff + +/* Offset of ASR registers from SDC base */ +#define SDCASR_OFFSET 0x120000 + +static void __iomem *sdcpwr_mapbase; +static void __iomem *sdcasr_mapbase; + +static DEFINE_MUTEX(pas_switch_mutex); + +/* Current astate, is used when waking up from power savings on + * one core, in case the other core has switched states during + * the idle time. + */ +static int current_astate; + +/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ +static struct cpufreq_frequency_table pas_freqs[] = { + {0, 0}, + {1, 0}, + {2, 0}, + {3, 0}, + {4, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr *pas_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* + * hardware specific functions + */ + +static int get_astate_freq(int astate) +{ + u32 ret; + ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); + + return ret & 0x3f; +} + +static int get_cur_astate(int cpu) +{ + u32 ret; + + ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); + ret = (ret >> (cpu * 4)) & 0x7; + + return ret; +} + +static int get_gizmo_latency(void) +{ + u32 giztime, ret; + + giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); + + /* just provide the upper bound */ + if (giztime & SDCPWR_GIZTIME_GR) + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; + else + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; + + return ret; +} + +static void set_astate(int cpu, unsigned int astate) +{ + unsigned long flags; + + /* Return if called before init has run */ + if (unlikely(!sdcasr_mapbase)) + return; + + local_irq_save(flags); + + out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); + + local_irq_restore(flags); +} + +int check_astate(void) +{ + return get_cur_astate(hard_smp_processor_id()); +} + +void restore_astate(int cpu) +{ + set_astate(cpu, current_astate); +} + +/* + * cpufreq functions + */ + +static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + const u32 *max_freqp; + u32 max_freq; + int i, cur_astate; + struct resource res; + struct device_node *cpu, *dn; + int err = -ENODEV; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + goto out; + + dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-sdc"); + if (!dn) + goto out; + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out; + sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); + if (!sdcasr_mapbase) { + err = -EINVAL; + goto out; + } + + dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gizmo"); + if (!dn) { + err = -ENODEV; + goto out_unmap_sdcasr; + } + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out_unmap_sdcasr; + sdcpwr_mapbase = ioremap(res.start, 0x1000); + if (!sdcpwr_mapbase) { + err = -EINVAL; + goto out_unmap_sdcasr; + } + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + if (!max_freqp) { + err = -EINVAL; + goto out_unmap_sdcpwr; + } + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { + pas_freqs[i].frequency = + get_astate_freq(pas_freqs[i].driver_data) * 100000; + pr_debug("%d: %d\n", i, pas_freqs[i].frequency); + } + + policy->cpuinfo.transition_latency = get_gizmo_latency(); + + cur_astate = get_cur_astate(policy->cpu); + pr_debug("current astate is at %d\n",cur_astate); + + policy->cur = pas_freqs[cur_astate].frequency; + cpumask_copy(policy->cpus, cpu_online_mask); + + ppc_proc_freq = policy->cur * 1000ul; + + cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); + + /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max + * are set correctly + */ + return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); + +out_unmap_sdcpwr: + iounmap(sdcpwr_mapbase); + +out_unmap_sdcasr: + iounmap(sdcasr_mapbase); +out: + return err; +} + +static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state != SYSTEM_BOOTING) + return 0; + + if (sdcasr_mapbase) + iounmap(sdcasr_mapbase); + if (sdcpwr_mapbase) + iounmap(sdcpwr_mapbase); + + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static int pas_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pas_freqs); +} + +static int pas_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + int pas_astate_new; + int i; + + cpufreq_frequency_table_target(policy, + pas_freqs, + target_freq, + relation, + &pas_astate_new); + + freqs.old = policy->cur; + freqs.new = pas_freqs[pas_astate_new].frequency; + + mutex_lock(&pas_switch_mutex); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + pas_freqs[pas_astate_new].frequency, + pas_freqs[pas_astate_new].driver_data); + + current_astate = pas_astate_new; + + for_each_online_cpu(i) + set_astate(i, pas_astate_new); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&pas_switch_mutex); + + ppc_proc_freq = freqs.new * 1000ul; + return 0; +} + +static struct cpufreq_driver pas_cpufreq_driver = { + .name = "pas-cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = pas_cpufreq_cpu_init, + .exit = pas_cpufreq_cpu_exit, + .verify = pas_cpufreq_verify, + .target = pas_cpufreq_target, + .attr = pas_cpu_freqs_attr, +}; + +/* + * module init and destoy + */ + +static int __init pas_cpufreq_init(void) +{ + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) + return -ENODEV; + + return cpufreq_register_driver(&pas_cpufreq_driver); +} + +static void __exit pas_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pas_cpufreq_driver); +} + +module_init(pas_cpufreq_init); +module_exit(pas_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 0de0008..1581fcc 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -243,6 +243,8 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy, return 0; cmd_incomplete: + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); iowrite16(0, &pcch_hdr->status); spin_unlock(&pcc_lock); return -EINVAL; diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c new file mode 100644 index 0000000..3104fad --- /dev/null +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -0,0 +1,721 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/hardirq.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/pmac_feature.h> +#include <asm/mmu_context.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/mpic.h> +#include <asm/keylargo.h> +#include <asm/switch_to.h> + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; +static unsigned long transition_latency; + +/* + * Different models uses different mechanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_6xx + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_6xx + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occurring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + switch_mmu_context(NULL, current->active_mm); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* + * Restore decrementer; we'll take a decrementer interrupt + * as soon as interrupts are re-enabled and the generic + * clockevents code will reprogram it with the right value. + */ + set_dec(1); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode, + int notify) +{ + struct cpufreq_freqs freqs; + unsigned long l3cr; + static unsigned long prev_l3cr; + + freqs.old = cur_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + if (freqs.old == freqs.new) + return 0; + + if (notify) + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + if (notify) + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + int rc; + + if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + rc = do_set_cpu_speed(policy, newstate, 1); + + ppc_proc_freq = cur_freq * 1000ul; + return rc; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = cur_freq; + + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); +} + +static u32 read_gpio(struct device_node *np) +{ + const u32 *reg = of_get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(policy, CPUFREQ_HIGH, 0); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(policy, sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); + + ppc_proc_freq = cur_freq * 1000ul; + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = pmac_cpufreq_verify, + .target = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, + .name = "powermac", + .owner = THIS_MODULE, +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + const u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + const u32 *freqs, *ratio; + + freqs = of_get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", + NULL); + if (ratio == NULL) { + printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = of_get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = of_get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ + printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr; + const u32 *value; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = of_get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + const u32 *value; + + if (strstr(cmd_line, "nocpufreq")) + return 0; + + /* Assume only one CPU */ + cpunode = of_find_node_by_type(NULL, "cpu"); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = of_get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + transition_latency = CPUFREQ_ETERNAL; + + /* Check for 7447A based MacRISC3 */ + if (of_machine_is_compatible("MacRISC3") && + of_get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + transition_latency = 8000000; + /* Check for other MacRISC3 machines */ + } else if (of_machine_is_compatible("PowerBook3,4") || + of_machine_is_compatible("PowerBook3,5") || + of_machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (of_machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 550 */ + else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + hi_freq = cur_freq; + low_freq = 500000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (of_machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + of_node_put(cpunode); + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; + + printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c new file mode 100644 index 0000000..7ba4234 --- /dev/null +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -0,0 +1,746 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#undef DEBUG + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/smu.h> +#include <asm/pmac_pfunc.h> + +#define DBG(fmt...) pr_debug(fmt) + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* g5_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retrieved from the device-tree + */ +static int g5_pmode_cur; + +static void (*g5_switch_volt)(int speed_mode); +static int (*g5_switch_freq)(int speed_mode); +static int (*g5_query_freq)(void); + +static DEFINE_MUTEX(g5_switch_mutex); + +static unsigned long transition_latency; + +#ifdef CONFIG_PMAC_SMU + +static const u32 *g5_pmode_data; +static int g5_pmode_max; + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* + * SMU based voltage switching for Neo2 platforms + */ + +static void g5_smu_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION_ONSTACK(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +/* + * Platform function based voltage/vdnap switching for Neo2 + */ + +static struct pmf_function *pfunc_set_vdnap0; +static struct pmf_function *pfunc_vdnap0_complete; + +static void g5_vdnap_switch_volt(int speed_mode) +{ + struct pmf_args args; + u32 slew, done = 0; + unsigned long timeout; + + slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; + args.count = 1; + args.u[0].p = &slew; + + pmf_call_one(pfunc_set_vdnap0, &args); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_vdnap0_complete, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); +} + + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int g5_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + local_irq_save(flags); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + local_irq_restore(flags); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_scom_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* + * Platform function based voltage switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu0_volt_high; +static struct pmf_function *pfunc_cpu0_volt_low; +static struct pmf_function *pfunc_cpu1_volt_high; +static struct pmf_function *pfunc_cpu1_volt_low; + +static void g5_pfunc_switch_volt(int speed_mode) +{ + if (speed_mode == CPUFREQ_HIGH) { + if (pfunc_cpu0_volt_high) + pmf_call_one(pfunc_cpu0_volt_high, NULL); + if (pfunc_cpu1_volt_high) + pmf_call_one(pfunc_cpu1_volt_high, NULL); + } else { + if (pfunc_cpu0_volt_low) + pmf_call_one(pfunc_cpu0_volt_low, NULL); + if (pfunc_cpu1_volt_low) + pmf_call_one(pfunc_cpu1_volt_low, NULL); + } + msleep(10); /* should be faster , to fix */ +} + +/* + * Platform function based frequency switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu_setfreq_high; +static struct pmf_function *pfunc_cpu_setfreq_low; +static struct pmf_function *pfunc_cpu_getfreq; +static struct pmf_function *pfunc_slewing_done; + +static int g5_pfunc_switch_freq(int speed_mode) +{ + struct pmf_args args; + u32 done = 0; + unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Do it */ + if (speed_mode == CPUFREQ_HIGH) + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); + else + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_slewing_done, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_pfunc_query_freq(void) +{ + struct pmf_args args; + u32 val = 0; + + args.count = 1; + args.u[0].p = &val; + pmf_call_one(pfunc_cpu_getfreq, &args); + return val ? CPUFREQ_HIGH : CPUFREQ_LOW; +} + + +/* + * Common interface to the cpufreq core + */ + +static int g5_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); +} + +static int g5_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + int rc; + + if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + if (g5_pmode_cur == newstate) + return 0; + + mutex_lock(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[newstate].frequency; + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + rc = g5_switch_freq(newstate); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + + mutex_unlock(&g5_switch_mutex); + + return rc; +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + /* secondary CPUs are tied to the primary one by the + * cpufreq core if in the secondary policy we tell it that + * it actually must be one policy together with all others. */ + cpumask_copy(policy->cpus, cpu_online_mask); + cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + g5_cpu_freqs); +} + + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = g5_cpufreq_verify, + .target = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = g5_cpu_freqs_attr, +}; + + +#ifdef CONFIG_PMAC_SMU + +static int __init g5_neo2_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpunode; + unsigned int psize, ssize; + unsigned long max_freq; + char *freq_method, *volt_method; + const u32 *valp; + u32 pvr_hi; + int use_volts_vdnap = 0; + int use_volts_smu = 0; + int rc = -ENODEV; + + /* Check supported platforms */ + if (of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2") || + of_machine_is_compatible("PowerMac9,1")) + use_volts_smu = 1; + else if (of_machine_is_compatible("PowerMac11,2")) + use_volts_vdnap = 1; + else + return -ENODEV; + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + const u32 *reg = of_get_property(cpunode, "reg", NULL); + if (reg == NULL || (*reg) != 0) + continue; + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); + return -ENODEV; + } + + /* Check 970FX for now */ + valp = of_get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + pvr_hi = (*valp) >> 16; + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + if (use_volts_smu) { + const struct smu_sdbp_header *shdr; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - + sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + g5_switch_volt = g5_smu_switch_volt; + volt_method = "SMU"; + } else if (use_volts_vdnap) { + struct device_node *root; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_ERR "cpufreq: Can't find root of " + "device tree\n"); + goto bail_noprops; + } + pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); + pfunc_vdnap0_complete = + pmf_find_function(root, "slewing-done"); + if (pfunc_set_vdnap0 == NULL || + pfunc_vdnap0_complete == NULL) { + printk(KERN_ERR "cpufreq: Can't find required " + "platform function\n"); + goto bail_noprops; + } + + g5_switch_volt = g5_vdnap_switch_volt; + volt_method = "GPIO"; + } else { + g5_switch_volt = g5_dummy_switch_volt; + volt_method = "none"; + } + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Set callbacks */ + transition_latency = 12000; + g5_switch_freq = g5_scom_switch_freq; + g5_query_freq = g5_scom_query_freq; + freq_method = "SCOM"; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +#endif /* CONFIG_PMAC_SMU */ + + +static int __init g5_pm72_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; + const u8 *eeprom = NULL; + const u32 *valp; + u64 max_freq, min_freq, ih, il; + int has_volt = 1, rc = 0; + + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); + return -ENODEV; + } + + /* Lookup the cpuid eeprom node */ + cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); + if (cpuid != NULL) + eeprom = of_get_property(cpuid, "cpuid", NULL); + if (eeprom == NULL) { + printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + rc = -ENODEV; + goto bail; + } + + /* Lookup the i2c hwclock */ + for (hwclock = NULL; + (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ + const char *loc = of_get_property(hwclock, + "hwctrl-location", NULL); + if (loc == NULL) + continue; + if (strcmp(loc, "CPU CLOCK")) + continue; + if (!of_get_property(hwclock, "platform-get-frequency", NULL)) + continue; + break; + } + if (hwclock == NULL) { + printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + rc = -ENODEV; + goto bail; + } + + DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); + + /* Now get all the platform functions */ + pfunc_cpu_getfreq = + pmf_find_function(hwclock, "get-frequency"); + pfunc_cpu_setfreq_high = + pmf_find_function(hwclock, "set-frequency-high"); + pfunc_cpu_setfreq_low = + pmf_find_function(hwclock, "set-frequency-low"); + pfunc_slewing_done = + pmf_find_function(hwclock, "slewing-done"); + pfunc_cpu0_volt_high = + pmf_find_function(hwclock, "set-voltage-high-0"); + pfunc_cpu0_volt_low = + pmf_find_function(hwclock, "set-voltage-low-0"); + pfunc_cpu1_volt_high = + pmf_find_function(hwclock, "set-voltage-high-1"); + pfunc_cpu1_volt_low = + pmf_find_function(hwclock, "set-voltage-low-1"); + + /* Check we have minimum requirements */ + if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || + pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { + printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + rc = -ENODEV; + goto bail; + } + + /* Check that we have complete sets */ + if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; + has_volt = 0; + } + if (!has_volt || + pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; + } + + /* Note: The device tree also contains a "platform-set-values" + * function for which I haven't quite figured out the usage. It + * might have to be called on init and/or wakeup, I'm not too sure + * but things seem to work fine without it so far ... + */ + + /* Get max frequency from device-tree */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) { + printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + rc = -ENODEV; + goto bail; + } + + max_freq = (*valp)/1000; + + /* Now calculate reduced frequency by using the cpuid input freq + * ratio. This requires 64 bits math unless we are willing to lose + * some precision + */ + ih = *((u32 *)(eeprom + 0x10)); + il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + printk(KERN_WARNING "cpufreq: No low frequency mode available" + " on this model !\n"); + rc = -ENODEV; + goto bail; + } + + min_freq = 0; + if (ih != 0 && il != 0) + min_freq = (max_freq * il) / ih; + + /* Sanity check */ + if (min_freq >= max_freq || min_freq < 1000) { + printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + rc = -ENXIO; + goto bail; + } + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = min_freq; + + /* Set callbacks */ + transition_latency = CPUFREQ_ETERNAL; + g5_switch_volt = g5_pfunc_switch_volt; + g5_switch_freq = g5_pfunc_switch_freq; + g5_query_freq = g5_pfunc_query_freq; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: i2c/pfunc, " + "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + bail: + if (rc != 0) { + pmf_put_function(pfunc_cpu_getfreq); + pmf_put_function(pfunc_cpu_setfreq_high); + pmf_put_function(pfunc_cpu_setfreq_low); + pmf_put_function(pfunc_slewing_done); + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + } + of_node_put(hwclock); + of_node_put(cpuid); + of_node_put(cpunode); + + return rc; +} + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpus; + int rc = 0; + + cpus = of_find_node_by_path("/cpus"); + if (cpus == NULL) { + DBG("No /cpus node !\n"); + return -ENODEV; + } + + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) + rc = g5_pm72_cpufreq_init(cpus); +#ifdef CONFIG_PMAC_SMU + else + rc = g5_neo2_cpufreq_init(cpus); +#endif /* CONFIG_PMAC_SMU */ + + of_node_put(cpus); + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index ea0222a..ea8e103 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -58,7 +58,7 @@ static int powernow_k6_get_cpu_multiplier(void) msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - return clock_ratio[(invalue >> 5)&7].index; + return clock_ratio[(invalue >> 5)&7].driver_data; } @@ -75,13 +75,13 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy, unsigned long msrval; struct cpufreq_freqs freqs; - if (clock_ratio[best_i].index > max_multiplier) { + if (clock_ratio[best_i].driver_data > max_multiplier) { printk(KERN_ERR PFX "invalid target frequency\n"); return; } freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; + freqs.new = busfreq * clock_ratio[best_i].driver_data; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -156,7 +156,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* table init */ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - f = clock_ratio[i].index; + f = clock_ratio[i].driver_data; if (f > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index 53888da..b9f80b7 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -186,7 +186,7 @@ static int get_ranges(unsigned char *pst) fid = *pst++; powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ + powernow_table[j].driver_data = fid; /* lower 8 bits */ speed = powernow_table[j].frequency; @@ -203,7 +203,7 @@ static int get_ranges(unsigned char *pst) maximum_speed = speed; vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, @@ -212,7 +212,7 @@ static int get_ranges(unsigned char *pst) mobile_vid_table[vid]%1000); } powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; + powernow_table[number_scales].driver_data = 0; return 0; } @@ -260,8 +260,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index) * vid are the upper 8 bits. */ - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; + fid = powernow_table[index].driver_data & 0xFF; + vid = (powernow_table[index].driver_data & 0xFF00) >> 8; rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; @@ -373,8 +373,8 @@ static int powernow_acpi_init(void) fid = pc.bits.fid; powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ + powernow_table[i].driver_data = fid; /* lower 8 bits */ + powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ speed = powernow_table[i].frequency; speed_mhz = speed / 1000; @@ -417,7 +417,7 @@ static int powernow_acpi_init(void) } powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; + powernow_table[i].driver_data = 0; /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index b828efe..78f018f 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -584,9 +584,9 @@ static void print_basics(struct powernow_k8_data *data) CPUFREQ_ENTRY_INVALID) { printk(KERN_INFO PFX "fid 0x%x (%d MHz), vid 0x%x\n", - data->powernow_table[j].index & 0xff, + data->powernow_table[j].driver_data & 0xff, data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); + data->powernow_table[j].driver_data >> 8); } } if (data->batps) @@ -632,13 +632,13 @@ static int fill_powernow_table(struct powernow_k8_data *data, for (j = 0; j < data->numps; j++) { int freq; - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */ + powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */ freq = find_khz_freq_from_fid(pst[j].fid); powernow_table[j].frequency = freq; } powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; + powernow_table[data->numps].driver_data = 0; if (query_current_values_with_pending_wait(data)) { kfree(powernow_table); @@ -810,7 +810,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; + powernow_table[data->acpi_data.state_count].driver_data = 0; data->powernow_table = powernow_table; if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) @@ -865,7 +865,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); index = fid | (vid<<8); - powernow_table[i].index = index; + powernow_table[i].driver_data = index; freq = find_khz_freq_from_fid(fid); powernow_table[i].frequency = freq; @@ -941,8 +941,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, * the cpufreq frequency table in find_psb_table, vid * are the upper 8 bits. */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; + fid = data->powernow_table[index].driver_data & 0xFF; + vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8; pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); @@ -967,9 +967,9 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, res = transition_fid_vid(data, fid, vid); if (res) - return res; - - freqs.new = find_khz_freq_from_fid(data->currfid); + freqs.new = freqs.old; + else + freqs.new = find_khz_freq_from_fid(data->currfid); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return res; diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c new file mode 100644 index 0000000..3cae452 --- /dev/null +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -0,0 +1,380 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * CPU Frequency Scaling driver for Freescale PowerPC corenet SoCs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/errno.h> +#include <sysdev/fsl_soc.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/smp.h> + +/** + * struct cpu_data - per CPU data struct + * @clk: the clk of CPU + * @parent: the parent node of cpu clock + * @table: frequency table + */ +struct cpu_data { + struct clk *clk; + struct device_node *parent; + struct cpufreq_frequency_table *table; +}; + +/** + * struct soc_data - SoC specific data + * @freq_mask: mask the disallowed frequencies + * @flag: unique flags + */ +struct soc_data { + u32 freq_mask[4]; + u32 flag; +}; + +#define FREQ_MASK 1 +/* see hardware specification for the allowed frqeuencies */ +static const struct soc_data sdata[] = { + { /* used by p2041 and p3041 */ + .freq_mask = {0x8, 0x8, 0x2, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p5020 */ + .freq_mask = {0x8, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p4080, p5040 */ + .freq_mask = {0}, + .flag = 0, + }, +}; + +/* + * the minimum allowed core frequency, in Hz + * for chassis v1.0, >= platform frequency + * for chassis v2.0, >= platform frequency / 2 + */ +static u32 min_cpufreq; +static const u32 *fmask; + +/* serialize frequency changes */ +static DEFINE_MUTEX(cpufreq_lock); +static DEFINE_PER_CPU(struct cpu_data *, cpu_data); + +/* cpumask in a cluster */ +static DEFINE_PER_CPU(cpumask_var_t, cpu_mask); + +#ifndef CONFIG_SMP +static inline const struct cpumask *cpu_core_mask(int cpu) +{ + return cpumask_of(0); +} +#endif + +static unsigned int corenet_cpufreq_get_speed(unsigned int cpu) +{ + struct cpu_data *data = per_cpu(cpu_data, cpu); + + return clk_get_rate(data->clk) / 1000; +} + +/* reduce the duplicated frequencies in frequency table */ +static void freq_table_redup(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j; + + for (i = 1; i < count; i++) { + for (j = 0; j < i; j++) { + if (freq_table[j].frequency == CPUFREQ_ENTRY_INVALID || + freq_table[j].frequency != + freq_table[i].frequency) + continue; + + freq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + break; + } + } +} + +/* sort the frequencies in frequency table in descenting order */ +static void freq_table_sort(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j, ind; + unsigned int freq, max_freq; + struct cpufreq_frequency_table table; + for (i = 0; i < count - 1; i++) { + max_freq = freq_table[i].frequency; + ind = i; + for (j = i + 1; j < count; j++) { + freq = freq_table[j].frequency; + if (freq == CPUFREQ_ENTRY_INVALID || + freq <= max_freq) + continue; + ind = j; + max_freq = freq; + } + + if (ind != i) { + /* exchange the frequencies */ + table.driver_data = freq_table[i].driver_data; + table.frequency = freq_table[i].frequency; + freq_table[i].driver_data = freq_table[ind].driver_data; + freq_table[i].frequency = freq_table[ind].frequency; + freq_table[ind].driver_data = table.driver_data; + freq_table[ind].frequency = table.frequency; + } + } +} + +static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct device_node *np; + int i, count, ret; + u32 freq, mask; + struct clk *clk; + struct cpufreq_frequency_table *table; + struct cpu_data *data; + unsigned int cpu = policy->cpu; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + pr_err("%s: no memory\n", __func__); + goto err_np; + } + + data->clk = of_clk_get(np, 0); + if (IS_ERR(data->clk)) { + pr_err("%s: no clock information\n", __func__); + goto err_nomem2; + } + + data->parent = of_parse_phandle(np, "clocks", 0); + if (!data->parent) { + pr_err("%s: could not get clock information\n", __func__); + goto err_nomem2; + } + + count = of_property_count_strings(data->parent, "clock-names"); + table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL); + if (!table) { + pr_err("%s: no memory\n", __func__); + goto err_node; + } + + if (fmask) + mask = fmask[get_hard_smp_processor_id(cpu)]; + else + mask = 0x0; + + for (i = 0; i < count; i++) { + clk = of_clk_get(data->parent, i); + freq = clk_get_rate(clk); + /* + * the clock is valid if its frequency is not masked + * and large than minimum allowed frequency. + */ + if (freq < min_cpufreq || (mask & (1 << i))) + table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + table[i].frequency = freq / 1000; + table[i].driver_data = i; + } + freq_table_redup(table, count); + freq_table_sort(table, count); + table[i].frequency = CPUFREQ_TABLE_END; + + /* set the min and max frequency properly */ + ret = cpufreq_frequency_table_cpuinfo(policy, table); + if (ret) { + pr_err("invalid frequency table: %d\n", ret); + goto err_nomem1; + } + + data->table = table; + per_cpu(cpu_data, cpu) = data; + + /* update ->cpus if we have cluster, no harm if not */ + cpumask_copy(policy->cpus, per_cpu(cpu_mask, cpu)); + for_each_cpu(i, per_cpu(cpu_mask, cpu)) + per_cpu(cpu_data, i) = data; + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = corenet_cpufreq_get_speed(policy->cpu); + + cpufreq_frequency_table_get_attr(table, cpu); + of_node_put(np); + + return 0; + +err_nomem1: + kfree(table); +err_node: + of_node_put(data->parent); +err_nomem2: + per_cpu(cpu_data, cpu) = NULL; + kfree(data); +err_np: + of_node_put(np); + + return -ENODEV; +} + +static int __exit corenet_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct cpu_data *data = per_cpu(cpu_data, policy->cpu); + unsigned int cpu; + + cpufreq_frequency_table_put_attr(policy->cpu); + of_node_put(data->parent); + kfree(data->table); + kfree(data); + + for_each_cpu(cpu, per_cpu(cpu_mask, policy->cpu)) + per_cpu(cpu_data, cpu) = NULL; + + return 0; +} + +static int corenet_cpufreq_verify(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *table = + per_cpu(cpu_data, policy->cpu)->table; + + return cpufreq_frequency_table_verify(policy, table); +} + +static int corenet_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + unsigned int new; + struct clk *parent; + int ret; + struct cpu_data *data = per_cpu(cpu_data, policy->cpu); + + cpufreq_frequency_table_target(policy, data->table, + target_freq, relation, &new); + + if (policy->cur == data->table[new].frequency) + return 0; + + freqs.old = policy->cur; + freqs.new = data->table[new].frequency; + + mutex_lock(&cpufreq_lock); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + parent = of_clk_get(data->parent, data->table[new].driver_data); + ret = clk_set_parent(data->clk, parent); + if (ret) + freqs.new = freqs.old; + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&cpufreq_lock); + + return ret; +} + +static struct freq_attr *corenet_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver ppc_corenet_cpufreq_driver = { + .name = "ppc_cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = corenet_cpufreq_cpu_init, + .exit = __exit_p(corenet_cpufreq_cpu_exit), + .verify = corenet_cpufreq_verify, + .target = corenet_cpufreq_target, + .get = corenet_cpufreq_get_speed, + .attr = corenet_cpufreq_attr, +}; + +static const struct of_device_id node_matches[] __initdata = { + { .compatible = "fsl,p2041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p3041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p5020-clockgen", .data = &sdata[1], }, + { .compatible = "fsl,p4080-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,p5040-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,qoriq-clockgen-2.0", }, + {} +}; + +static int __init ppc_corenet_cpufreq_init(void) +{ + int ret; + struct device_node *np; + const struct of_device_id *match; + const struct soc_data *data; + unsigned int cpu; + + np = of_find_matching_node(NULL, node_matches); + if (!np) + return -ENODEV; + + for_each_possible_cpu(cpu) { + if (!alloc_cpumask_var(&per_cpu(cpu_mask, cpu), GFP_KERNEL)) + goto err_mask; + cpumask_copy(per_cpu(cpu_mask, cpu), cpu_core_mask(cpu)); + } + + match = of_match_node(node_matches, np); + data = match->data; + if (data) { + if (data->flag) + fmask = data->freq_mask; + min_cpufreq = fsl_get_sys_freq(); + } else { + min_cpufreq = fsl_get_sys_freq() / 2; + } + + of_node_put(np); + + ret = cpufreq_register_driver(&ppc_corenet_cpufreq_driver); + if (!ret) + pr_info("Freescale PowerPC corenet CPU frequency scaling driver\n"); + + return ret; + +err_mask: + for_each_possible_cpu(cpu) + free_cpumask_var(per_cpu(cpu_mask, cpu)); + + return -ENOMEM; +} +module_init(ppc_corenet_cpufreq_init); + +static void __exit ppc_corenet_cpufreq_exit(void) +{ + unsigned int cpu; + + for_each_possible_cpu(cpu) + free_cpumask_var(per_cpu(cpu_mask, cpu)); + + cpufreq_unregister_driver(&ppc_corenet_cpufreq_driver); +} +module_exit(ppc_corenet_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>"); +MODULE_DESCRIPTION("cpufreq driver for Freescale e500mc series SoCs"); diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c index e577a1d..5936f8d 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq.c +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -106,7 +106,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) /* initialize frequency table */ for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; + cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data; pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); } @@ -165,7 +165,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy, "1/%d of max frequency\n", policy->cpu, cbe_freqs[cbe_pmode_new].frequency, - cbe_freqs[cbe_pmode_new].index); + cbe_freqs[cbe_pmode_new].driver_data); rc = set_pmode(policy->cpu, cbe_pmode_new); diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 9e5bc8e..fb3981a 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -420,7 +420,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) /* Generate pxa25x the run cpufreq_frequency_table struct */ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; - pxa255_run_freq_table[i].index = i; + pxa255_run_freq_table[i].driver_data = i; } pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -428,7 +428,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz; - pxa255_turbo_freq_table[i].index = i; + pxa255_turbo_freq_table[i].driver_data = i; } pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -440,9 +440,9 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) if (freq > pxa27x_maxfreq) break; pxa27x_freq_table[i].frequency = freq; - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; } - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c index 15d60f8..9c92ef0 100644 --- a/drivers/cpufreq/pxa3xx-cpufreq.c +++ b/drivers/cpufreq/pxa3xx-cpufreq.c @@ -98,10 +98,10 @@ static int setup_freqs_table(struct cpufreq_policy *policy, return -ENOMEM; for (i = 0; i < num; i++) { - table[i].index = i; + table[i].driver_data = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].index = i; + table[num].driver_data = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 4f1881e..e35865a 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -244,7 +244,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) goto out; - idx = s3c_freq->freq_table[i].index; + idx = s3c_freq->freq_table[i].driver_data; if (idx == SOURCE_HCLK) to_dvs = 1; @@ -312,7 +312,7 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) if (freq->frequency == CPUFREQ_ENTRY_INVALID) continue; - dvfs = &s3c2416_dvfs_table[freq->index]; + dvfs = &s3c2416_dvfs_table[freq->driver_data]; found = 0; /* Check only the min-voltage, more is always ok on S3C2416 */ @@ -462,7 +462,7 @@ static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) freq = s3c_freq->freq_table; while (freq->frequency != CPUFREQ_TABLE_END) { /* special handling for dvs mode */ - if (freq->index == 0) { + if (freq->driver_data == 0) { if (!s3c_freq->hclk) { pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n", freq->frequency); diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 3c0e78e..3513e74 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -70,7 +70,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - cfg->pll.index = __raw_readl(S3C2410_MPLLCON); + cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); cfg->pll.frequency = fclk; cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); @@ -431,7 +431,7 @@ static unsigned int suspend_freq; static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.index = __raw_readl(S3C2410_MPLLCON); + suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); suspend_freq = s3c_cpufreq_get(0) * 1000; return 0; diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 27cacb5..13bb4ba 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -87,7 +87,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, freqs.old = clk_get_rate(armclk) / 1000; freqs.new = s3c64xx_freq_table[i].frequency; freqs.flags = 0; - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data]; if (freqs.old == freqs.new) return 0; @@ -104,7 +104,8 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) { pr_err("Failed to set VDDARM for %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; + goto post_notify; } } #endif @@ -113,10 +114,13 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret < 0) { pr_err("Failed to set rate %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto err; #ifdef CONFIG_REGULATOR if (vddarm && freqs.new < freqs.old) { diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index f740b13..77a2109 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -71,7 +71,7 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_disable(); clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + *cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data; local_irq_enable(); diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c index 306ae46..93061a4 100644 --- a/drivers/cpufreq/sparc-us2e-cpufreq.c +++ b/drivers/cpufreq/sparc-us2e-cpufreq.c @@ -308,17 +308,17 @@ static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us2e_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 4; - table[2].index = 3; + table[2].driver_data = 3; table[2].frequency = clock_tick / 6; - table[2].index = 4; + table[2].driver_data = 4; table[2].frequency = clock_tick / 8; - table[2].index = 5; + table[2].driver_data = 5; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c index c71ee14..880ee29 100644 --- a/drivers/cpufreq/sparc-us3-cpufreq.c +++ b/drivers/cpufreq/sparc-us3-cpufreq.c @@ -169,13 +169,13 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us3_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 32; - table[3].index = 0; + table[3].driver_data = 0; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 156829f..c3efa7f 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -250,11 +250,11 @@ static int spear_cpufreq_driver_init(void) } for (i = 0; i < cnt; i++) { - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = be32_to_cpup(val++); } - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = CPUFREQ_TABLE_END; spear_cpufreq.freq_tbl = freq_tbl; diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index 618e6f4..0915e71 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -79,11 +79,11 @@ static struct cpufreq_driver centrino_driver; /* Computes the correct form for IA32_PERF_CTL MSR for a particular frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ + This is stored as "driver_data" in the structure. */ #define OP(mhz, mv) \ { \ .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ + .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ } /* @@ -307,7 +307,7 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) per_cpu(centrino_model, cpu)->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) + if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data) return per_cpu(centrino_model, cpu)-> op_points[i].frequency; } @@ -501,7 +501,7 @@ static int centrino_target (struct cpufreq_policy *policy, break; } - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; + msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data; if (first_cpu) { rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index c74c0e1..cd66b85 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -28,17 +28,16 @@ #include <linux/io.h> #include <linux/suspend.h> -/* Frequency table index must be sequential starting at 0 */ static struct cpufreq_frequency_table freq_table[] = { - { 0, 216000 }, - { 1, 312000 }, - { 2, 456000 }, - { 3, 608000 }, - { 4, 760000 }, - { 5, 816000 }, - { 6, 912000 }, - { 7, 1000000 }, - { 8, CPUFREQ_TABLE_END }, + { .frequency = 216000 }, + { .frequency = 312000 }, + { .frequency = 456000 }, + { .frequency = 608000 }, + { .frequency = 760000 }, + { .frequency = 816000 }, + { .frequency = 912000 }, + { .frequency = 1000000 }, + { .frequency = CPUFREQ_TABLE_END }, }; #define NUM_CPUS 2 @@ -138,12 +137,12 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy, if (ret) { pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", freqs.new); - return ret; + freqs.new = freqs.old; } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned long tegra_cpu_highest_speed(void) diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index e21cdfa..0e2cd5c 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -1,7 +1,9 @@ -config CPU_IDLE +menuconfig CPU_IDLE bool "CPU idle PM support" default y if ACPI || PPC_PSERIES + select CPU_IDLE_GOV_LADDER if (!NO_HZ && !NO_HZ_IDLE) + select CPU_IDLE_GOV_MENU if (NO_HZ || NO_HZ_IDLE) help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform @@ -9,9 +11,10 @@ config CPU_IDLE If you're using an ACPI-enabled platform, you should say Y here. +if CPU_IDLE + config CPU_IDLE_MULTIPLE_DRIVERS bool "Support multiple cpuidle drivers" - depends on CPU_IDLE default n help Allows the cpuidle framework to use different drivers for each CPU. @@ -19,20 +22,13 @@ config CPU_IDLE_MULTIPLE_DRIVERS states. If unsure say N. config CPU_IDLE_GOV_LADDER - bool - depends on CPU_IDLE + bool "Ladder governor (for periodic timer tick)" default y config CPU_IDLE_GOV_MENU - bool - depends on CPU_IDLE && NO_HZ + bool "Menu governor (for tickless system)" default y -config ARCH_NEEDS_CPU_IDLE_COUPLED - def_bool n - -if CPU_IDLE - config CPU_IDLE_CALXEDA bool "CPU Idle Driver for Calxeda processors" depends on ARCH_HIGHBANK @@ -40,4 +36,13 @@ config CPU_IDLE_CALXEDA help Select this to enable cpuidle on Calxeda processors. +config CPU_IDLE_ZYNQ + bool "CPU Idle Driver for Xilinx Zynq processors" + depends on ARCH_ZYNQ + help + Select this to enable cpuidle on Xilinx Zynq processors. + endif + +config ARCH_NEEDS_CPU_IDLE_COUPLED + def_bool n diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 0d8bd55..8767a7b 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o +obj-$(CONFIG_CPU_IDLE_ZYNQ) += cpuidle-zynq.o diff --git a/drivers/cpuidle/cpuidle-zynq.c b/drivers/cpuidle/cpuidle-zynq.c new file mode 100644 index 0000000..38e03a1 --- /dev/null +++ b/drivers/cpuidle/cpuidle-zynq.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012-2013 Xilinx + * + * CPU idle support for Xilinx Zynq + * + * based on arch/arm/mach-at91/cpuidle.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + * The cpu idle uses wait-for-interrupt and RAM self refresh in order + * to implement two idle states - + * #1 wait-for-interrupt + * #2 wait-for-interrupt and RAM self refresh + * + * Maintainer: Michal Simek <michal.simek@xilinx.com> + */ + +#include <linux/init.h> +#include <linux/cpu_pm.h> +#include <linux/cpuidle.h> +#include <linux/of.h> +#include <asm/proc-fns.h> +#include <asm/cpuidle.h> + +#define ZYNQ_MAX_STATES 2 + +/* Actual code that puts the SoC in different idle states */ +static int zynq_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + /* Devices must be stopped here */ + cpu_pm_enter(); + + /* Add code for DDR self refresh start */ + cpu_do_idle(); + + /* Add code for DDR self refresh stop */ + cpu_pm_exit(); + + return index; +} + +static struct cpuidle_driver zynq_idle_driver = { + .name = "zynq_idle", + .owner = THIS_MODULE, + .states = { + ARM_CPUIDLE_WFI_STATE, + { + .enter = zynq_enter_idle, + .exit_latency = 10, + .target_residency = 10000, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, + .name = "RAM_SR", + .desc = "WFI and RAM Self Refresh", + }, + }, + .safe_state_index = 0, + .state_count = ZYNQ_MAX_STATES, +}; + +/* Initialize CPU idle by registering the idle states */ +static int __init zynq_cpuidle_init(void) +{ + if (!of_machine_is_compatible("xlnx,zynq-7000")) + return -ENODEV; + + pr_info("Xilinx Zynq CpuIdle Driver started\n"); + + return cpuidle_register(&zynq_idle_driver, NULL); +} + +device_initcall(zynq_cpuidle_init); diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index c3a93fe..fdc432f 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -466,7 +466,7 @@ void cpuidle_unregister(struct cpuidle_driver *drv) int cpu; struct cpuidle_device *device; - for_each_possible_cpu(cpu) { + for_each_cpu(cpu, drv->cpumask) { device = &per_cpu(cpuidle_dev, cpu); cpuidle_unregister_device(device); } @@ -498,7 +498,7 @@ int cpuidle_register(struct cpuidle_driver *drv, return ret; } - for_each_possible_cpu(cpu) { + for_each_cpu(cpu, drv->cpumask) { device = &per_cpu(cpuidle_dev, cpu); device->cpu = cpu; diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 8dfaaae..3ac499d 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -18,182 +18,249 @@ DEFINE_SPINLOCK(cpuidle_driver_lock); -static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu); -static struct cpuidle_driver * __cpuidle_get_cpu_driver(int cpu); +#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS -static void cpuidle_setup_broadcast_timer(void *arg) +static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers); + +/** + * __cpuidle_get_cpu_driver - return the cpuidle driver tied to a CPU. + * @cpu: the CPU handled by the driver + * + * Returns a pointer to struct cpuidle_driver or NULL if no driver has been + * registered for @cpu. + */ +static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) { - int cpu = smp_processor_id(); - clockevents_notify((long)(arg), &cpu); + return per_cpu(cpuidle_drivers, cpu); } -static void __cpuidle_driver_init(struct cpuidle_driver *drv, int cpu) +/** + * __cpuidle_unset_driver - unset per CPU driver variables. + * @drv: a valid pointer to a struct cpuidle_driver + * + * For each CPU in the driver's CPU mask, unset the registered driver per CPU + * variable. If @drv is different from the registered driver, the corresponding + * variable is not cleared. + */ +static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) { - int i; - - drv->refcnt = 0; + int cpu; - for (i = drv->state_count - 1; i >= 0 ; i--) { + for_each_cpu(cpu, drv->cpumask) { - if (!(drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP)) + if (drv != __cpuidle_get_cpu_driver(cpu)) continue; - drv->bctimer = 1; - on_each_cpu_mask(get_cpu_mask(cpu), cpuidle_setup_broadcast_timer, - (void *)CLOCK_EVT_NOTIFY_BROADCAST_ON, 1); - break; + per_cpu(cpuidle_drivers, cpu) = NULL; } } -static int __cpuidle_register_driver(struct cpuidle_driver *drv, int cpu) +/** + * __cpuidle_set_driver - set per CPU driver variables the the given driver. + * @drv: a valid pointer to a struct cpuidle_driver + * + * For each CPU in the driver's cpumask, unset the registered driver per CPU + * to @drv. + * + * Returns 0 on success, -EBUSY if the CPUs have driver(s) already. + */ +static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) { - if (!drv || !drv->state_count) - return -EINVAL; - - if (cpuidle_disabled()) - return -ENODEV; + int cpu; - if (__cpuidle_get_cpu_driver(cpu)) - return -EBUSY; + for_each_cpu(cpu, drv->cpumask) { - __cpuidle_driver_init(drv, cpu); + if (__cpuidle_get_cpu_driver(cpu)) { + __cpuidle_unset_driver(drv); + return -EBUSY; + } - __cpuidle_set_cpu_driver(drv, cpu); + per_cpu(cpuidle_drivers, cpu) = drv; + } return 0; } -static void __cpuidle_unregister_driver(struct cpuidle_driver *drv, int cpu) -{ - if (drv != __cpuidle_get_cpu_driver(cpu)) - return; +#else - if (!WARN_ON(drv->refcnt > 0)) - __cpuidle_set_cpu_driver(NULL, cpu); +static struct cpuidle_driver *cpuidle_curr_driver; - if (drv->bctimer) { - drv->bctimer = 0; - on_each_cpu_mask(get_cpu_mask(cpu), cpuidle_setup_broadcast_timer, - (void *)CLOCK_EVT_NOTIFY_BROADCAST_OFF, 1); - } +/** + * __cpuidle_get_cpu_driver - return the global cpuidle driver pointer. + * @cpu: ignored without the multiple driver support + * + * Return a pointer to a struct cpuidle_driver object or NULL if no driver was + * previously registered. + */ +static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) +{ + return cpuidle_curr_driver; } -#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS +/** + * __cpuidle_set_driver - assign the global cpuidle driver variable. + * @drv: pointer to a struct cpuidle_driver object + * + * Returns 0 on success, -EBUSY if the driver is already registered. + */ +static inline int __cpuidle_set_driver(struct cpuidle_driver *drv) +{ + if (cpuidle_curr_driver) + return -EBUSY; -static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers); + cpuidle_curr_driver = drv; -static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu) -{ - per_cpu(cpuidle_drivers, cpu) = drv; + return 0; } -static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) +/** + * __cpuidle_unset_driver - unset the global cpuidle driver variable. + * @drv: a pointer to a struct cpuidle_driver + * + * Reset the global cpuidle variable to NULL. If @drv does not match the + * registered driver, do nothing. + */ +static inline void __cpuidle_unset_driver(struct cpuidle_driver *drv) { - return per_cpu(cpuidle_drivers, cpu); + if (drv == cpuidle_curr_driver) + cpuidle_curr_driver = NULL; } -static void __cpuidle_unregister_all_cpu_driver(struct cpuidle_driver *drv) +#endif + +/** + * cpuidle_setup_broadcast_timer - enable/disable the broadcast timer + * @arg: a void pointer used to match the SMP cross call API + * + * @arg is used as a value of type 'long' with on of the two values: + * - CLOCK_EVT_NOTIFY_BROADCAST_ON + * - CLOCK_EVT_NOTIFY_BROADCAST_OFF + * + * Set the broadcast timer notification for the current CPU. This function + * is executed per CPU by an SMP cross call. It not supposed to be called + * directly. + */ +static void cpuidle_setup_broadcast_timer(void *arg) { - int cpu; - for_each_present_cpu(cpu) - __cpuidle_unregister_driver(drv, cpu); + int cpu = smp_processor_id(); + clockevents_notify((long)(arg), &cpu); } -static int __cpuidle_register_all_cpu_driver(struct cpuidle_driver *drv) +/** + * __cpuidle_driver_init - initialize the driver's internal data + * @drv: a valid pointer to a struct cpuidle_driver + * + * Returns 0 on success, a negative error code otherwise. + */ +static int __cpuidle_driver_init(struct cpuidle_driver *drv) { - int ret = 0; - int i, cpu; + int i; - for_each_present_cpu(cpu) { - ret = __cpuidle_register_driver(drv, cpu); - if (ret) - break; - } + drv->refcnt = 0; - if (ret) - for_each_present_cpu(i) { - if (i == cpu) - break; - __cpuidle_unregister_driver(drv, i); - } + /* + * Use all possible CPUs as the default, because if the kernel boots + * with some CPUs offline and then we online one of them, the CPU + * notifier has to know which driver to assign. + */ + if (!drv->cpumask) + drv->cpumask = (struct cpumask *)cpu_possible_mask; + + /* + * Look for the timer stop flag in the different states, so that we know + * if the broadcast timer has to be set up. The loop is in the reverse + * order, because usually on of the the deeper states has this flag set. + */ + for (i = drv->state_count - 1; i >= 0 ; i--) { + if (!(drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP)) + continue; - return ret; + drv->bctimer = 1; + break; + } + + return 0; } -int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu) +/** + * __cpuidle_register_driver: register the driver + * @drv: a valid pointer to a struct cpuidle_driver + * + * Do some sanity checks, initialize the driver, assign the driver to the + * global cpuidle driver variable(s) and set up the broadcast timer if the + * cpuidle driver has some states that shut down the local timer. + * + * Returns 0 on success, a negative error code otherwise: + * * -EINVAL if the driver pointer is NULL or no idle states are available + * * -ENODEV if the cpuidle framework is disabled + * * -EBUSY if the driver is already assigned to the global variable(s) + */ +static int __cpuidle_register_driver(struct cpuidle_driver *drv) { int ret; - spin_lock(&cpuidle_driver_lock); - ret = __cpuidle_register_driver(drv, cpu); - spin_unlock(&cpuidle_driver_lock); + if (!drv || !drv->state_count) + return -EINVAL; - return ret; -} + if (cpuidle_disabled()) + return -ENODEV; -void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu) -{ - spin_lock(&cpuidle_driver_lock); - __cpuidle_unregister_driver(drv, cpu); - spin_unlock(&cpuidle_driver_lock); -} + ret = __cpuidle_driver_init(drv); + if (ret) + return ret; -/** - * cpuidle_register_driver - registers a driver - * @drv: the driver - */ -int cpuidle_register_driver(struct cpuidle_driver *drv) -{ - int ret; + ret = __cpuidle_set_driver(drv); + if (ret) + return ret; - spin_lock(&cpuidle_driver_lock); - ret = __cpuidle_register_all_cpu_driver(drv); - spin_unlock(&cpuidle_driver_lock); + if (drv->bctimer) + on_each_cpu_mask(drv->cpumask, cpuidle_setup_broadcast_timer, + (void *)CLOCK_EVT_NOTIFY_BROADCAST_ON, 1); - return ret; + return 0; } -EXPORT_SYMBOL_GPL(cpuidle_register_driver); /** - * cpuidle_unregister_driver - unregisters a driver - * @drv: the driver + * __cpuidle_unregister_driver - unregister the driver + * @drv: a valid pointer to a struct cpuidle_driver + * + * Check if the driver is no longer in use, reset the global cpuidle driver + * variable(s) and disable the timer broadcast notification mechanism if it was + * in use. + * */ -void cpuidle_unregister_driver(struct cpuidle_driver *drv) +static void __cpuidle_unregister_driver(struct cpuidle_driver *drv) { - spin_lock(&cpuidle_driver_lock); - __cpuidle_unregister_all_cpu_driver(drv); - spin_unlock(&cpuidle_driver_lock); -} -EXPORT_SYMBOL_GPL(cpuidle_unregister_driver); - -#else - -static struct cpuidle_driver *cpuidle_curr_driver; + if (WARN_ON(drv->refcnt > 0)) + return; -static inline void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu) -{ - cpuidle_curr_driver = drv; -} + if (drv->bctimer) { + drv->bctimer = 0; + on_each_cpu_mask(drv->cpumask, cpuidle_setup_broadcast_timer, + (void *)CLOCK_EVT_NOTIFY_BROADCAST_OFF, 1); + } -static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu) -{ - return cpuidle_curr_driver; + __cpuidle_unset_driver(drv); } /** * cpuidle_register_driver - registers a driver - * @drv: the driver + * @drv: a pointer to a valid struct cpuidle_driver + * + * Register the driver under a lock to prevent concurrent attempts to + * [un]register the driver from occuring at the same time. + * + * Returns 0 on success, a negative error code (returned by + * __cpuidle_register_driver()) otherwise. */ int cpuidle_register_driver(struct cpuidle_driver *drv) { - int ret, cpu; + int ret; - cpu = get_cpu(); spin_lock(&cpuidle_driver_lock); - ret = __cpuidle_register_driver(drv, cpu); + ret = __cpuidle_register_driver(drv); spin_unlock(&cpuidle_driver_lock); - put_cpu(); return ret; } @@ -201,23 +268,24 @@ EXPORT_SYMBOL_GPL(cpuidle_register_driver); /** * cpuidle_unregister_driver - unregisters a driver - * @drv: the driver + * @drv: a pointer to a valid struct cpuidle_driver + * + * Unregisters the cpuidle driver under a lock to prevent concurrent attempts + * to [un]register the driver from occuring at the same time. @drv has to + * match the currently registered driver. */ void cpuidle_unregister_driver(struct cpuidle_driver *drv) { - int cpu; - - cpu = get_cpu(); spin_lock(&cpuidle_driver_lock); - __cpuidle_unregister_driver(drv, cpu); + __cpuidle_unregister_driver(drv); spin_unlock(&cpuidle_driver_lock); - put_cpu(); } EXPORT_SYMBOL_GPL(cpuidle_unregister_driver); -#endif /** - * cpuidle_get_driver - return the current driver + * cpuidle_get_driver - return the driver tied to the current CPU. + * + * Returns a struct cpuidle_driver pointer, or NULL if no driver is registered. */ struct cpuidle_driver *cpuidle_get_driver(void) { @@ -233,7 +301,11 @@ struct cpuidle_driver *cpuidle_get_driver(void) EXPORT_SYMBOL_GPL(cpuidle_get_driver); /** - * cpuidle_get_cpu_driver - return the driver tied with a cpu + * cpuidle_get_cpu_driver - return the driver registered for a CPU. + * @dev: a valid pointer to a struct cpuidle_device + * + * Returns a struct cpuidle_driver pointer, or NULL if no driver is registered + * for the CPU associated with @dev. */ struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev) { @@ -244,6 +316,14 @@ struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev) } EXPORT_SYMBOL_GPL(cpuidle_get_cpu_driver); +/** + * cpuidle_driver_ref - get a reference to the driver. + * + * Increment the reference counter of the cpuidle driver associated with + * the current CPU. + * + * Returns a pointer to the driver, or NULL if the current CPU has no driver. + */ struct cpuidle_driver *cpuidle_driver_ref(void) { struct cpuidle_driver *drv; @@ -257,6 +337,12 @@ struct cpuidle_driver *cpuidle_driver_ref(void) return drv; } +/** + * cpuidle_driver_unref - puts down the refcount for the driver + * + * Decrement the reference counter of the cpuidle driver associated with + * the current CPU. + */ void cpuidle_driver_unref(void) { struct cpuidle_driver *drv = cpuidle_get_driver(); diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 0f079be..31f3adb 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -67,7 +67,7 @@ comment "DEVFREQ Drivers" config ARM_EXYNOS4_BUS_DEVFREQ bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" - depends on CPU_EXYNOS4210 || CPU_EXYNOS4212 || CPU_EXYNOS4412 + depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 select ARCH_HAS_OPP select DEVFREQ_GOV_SIMPLE_ONDEMAND help @@ -78,4 +78,14 @@ config ARM_EXYNOS4_BUS_DEVFREQ To operate with optimal voltages, ASV support is required (CONFIG_EXYNOS_ASV). +config ARM_EXYNOS5_BUS_DEVFREQ + bool "ARM Exynos5250 Bus DEVFREQ Driver" + depends on SOC_EXYNOS5250 + select ARCH_HAS_OPP + select DEVFREQ_GOV_SIMPLE_ONDEMAND + help + This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int). + It reads PPMU counters of memory controllers and adjusts the + operating frequencies and voltages with OPP support. + endif # PM_DEVFREQ diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile index 8c46423..16138c9 100644 --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile @@ -5,4 +5,5 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o # DEVFREQ Drivers -obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o +obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/ +obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/ diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 3b36797..44c4079 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -271,6 +271,7 @@ void devfreq_monitor_suspend(struct devfreq *devfreq) return; } + devfreq_update_status(devfreq, devfreq->previous_freq); devfreq->stop_polling = true; mutex_unlock(&devfreq->lock); cancel_delayed_work_sync(&devfreq->work); @@ -287,6 +288,8 @@ EXPORT_SYMBOL(devfreq_monitor_suspend); */ void devfreq_monitor_resume(struct devfreq *devfreq) { + unsigned long freq; + mutex_lock(&devfreq->lock); if (!devfreq->stop_polling) goto out; @@ -295,8 +298,14 @@ void devfreq_monitor_resume(struct devfreq *devfreq) devfreq->profile->polling_ms) queue_delayed_work(devfreq_wq, &devfreq->work, msecs_to_jiffies(devfreq->profile->polling_ms)); + + devfreq->last_stat_updated = jiffies; devfreq->stop_polling = false; + if (devfreq->profile->get_cur_freq && + !devfreq->profile->get_cur_freq(devfreq->dev.parent, &freq)) + devfreq->previous_freq = freq; + out: mutex_unlock(&devfreq->lock); } @@ -518,6 +527,8 @@ EXPORT_SYMBOL(devfreq_add_device); /** * devfreq_remove_device() - Remove devfreq feature from a device. * @devfreq: the devfreq instance to be removed + * + * The opposite of devfreq_add_device(). */ int devfreq_remove_device(struct devfreq *devfreq) { @@ -533,6 +544,10 @@ EXPORT_SYMBOL(devfreq_remove_device); /** * devfreq_suspend_device() - Suspend devfreq of a device. * @devfreq: the devfreq instance to be suspended + * + * This function is intended to be called by the pm callbacks + * (e.g., runtime_suspend, suspend) of the device driver that + * holds the devfreq. */ int devfreq_suspend_device(struct devfreq *devfreq) { @@ -550,6 +565,10 @@ EXPORT_SYMBOL(devfreq_suspend_device); /** * devfreq_resume_device() - Resume devfreq of a device. * @devfreq: the devfreq instance to be resumed + * + * This function is intended to be called by the pm callbacks + * (e.g., runtime_resume, resume) of the device driver that + * holds the devfreq. */ int devfreq_resume_device(struct devfreq *devfreq) { @@ -905,11 +924,11 @@ static ssize_t show_trans_table(struct device *dev, struct device_attribute *att { struct devfreq *devfreq = to_devfreq(dev); ssize_t len; - int i, j, err; + int i, j; unsigned int max_state = devfreq->profile->max_state; - err = devfreq_update_status(devfreq, devfreq->previous_freq); - if (err) + if (!devfreq->stop_polling && + devfreq_update_status(devfreq, devfreq->previous_freq)) return 0; len = sprintf(buf, " From : To\n"); diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile new file mode 100644 index 0000000..bfaaf5b --- /dev/null +++ b/drivers/devfreq/exynos/Makefile @@ -0,0 +1,3 @@ +# Exynos DEVFREQ Drivers +obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o +obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c index 3f37f3b..c5f86d8 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos/exynos4_bus.c @@ -974,6 +974,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, rcu_read_unlock(); dev_err(data->dev, "%s: unable to find a min freq\n", __func__); + mutex_unlock(&data->lock); return PTR_ERR(opp); } new_oppinfo.rate = opp_get_freq(opp); diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c new file mode 100644 index 0000000..574b16b --- /dev/null +++ b/drivers/devfreq/exynos/exynos5_bus.c @@ -0,0 +1,503 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework + * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com> + * Support for only EXYNOS5250 is present. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/devfreq.h> +#include <linux/io.h> +#include <linux/opp.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/opp.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/pm_qos.h> +#include <linux/regulator/consumer.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#include "exynos_ppmu.h" + +#define MAX_SAFEVOLT 1100000 /* 1.10V */ +/* Assume that the bus is saturated if the utilization is 25% */ +#define INT_BUS_SATURATION_RATIO 25 + +enum int_level_idx { + LV_0, + LV_1, + LV_2, + LV_3, + LV_4, + _LV_END +}; + +enum exynos_ppmu_list { + PPMU_RIGHT, + PPMU_END, +}; + +struct busfreq_data_int { + struct device *dev; + struct devfreq *devfreq; + struct regulator *vdd_int; + struct exynos_ppmu ppmu[PPMU_END]; + unsigned long curr_freq; + bool disabled; + + struct notifier_block pm_notifier; + struct mutex lock; + struct pm_qos_request int_req; + struct clk *int_clk; +}; + +struct int_bus_opp_table { + unsigned int idx; + unsigned long clk; + unsigned long volt; +}; + +static struct int_bus_opp_table exynos5_int_opp_table[] = { + {LV_0, 266000, 1025000}, + {LV_1, 200000, 1025000}, + {LV_2, 160000, 1025000}, + {LV_3, 133000, 1025000}, + {LV_4, 100000, 1025000}, + {0, 0, 0}, +}; + +static void busfreq_mon_reset(struct busfreq_data_int *data) +{ + unsigned int i; + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + void __iomem *ppmu_base = data->ppmu[i].hw_base; + + /* Reset the performance and cycle counters */ + exynos_ppmu_reset(ppmu_base); + + /* Setup count registers to monitor read/write transactions */ + data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT; + exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3, + data->ppmu[i].event[PPMU_PMNCNT3]); + + exynos_ppmu_start(ppmu_base); + } +} + +static void exynos5_read_ppmu(struct busfreq_data_int *data) +{ + int i, j; + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + void __iomem *ppmu_base = data->ppmu[i].hw_base; + + exynos_ppmu_stop(ppmu_base); + + /* Update local data from PPMU */ + data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT); + + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { + if (data->ppmu[i].event[j] == 0) + data->ppmu[i].count[j] = 0; + else + data->ppmu[i].count[j] = + exynos_ppmu_read(ppmu_base, j); + } + } + + busfreq_mon_reset(data); +} + +static int exynos5_int_setvolt(struct busfreq_data_int *data, + unsigned long volt) +{ + return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT); +} + +static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, + u32 flags) +{ + int err = 0; + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + struct opp *opp; + unsigned long old_freq, freq; + unsigned long volt; + + rcu_read_lock(); + opp = devfreq_recommended_opp(dev, _freq, flags); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(dev, "%s: Invalid OPP.\n", __func__); + return PTR_ERR(opp); + } + + freq = opp_get_freq(opp); + volt = opp_get_voltage(opp); + rcu_read_unlock(); + + old_freq = data->curr_freq; + + if (old_freq == freq) + return 0; + + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, volt); + + mutex_lock(&data->lock); + + if (data->disabled) + goto out; + + if (freq > exynos5_int_opp_table[0].clk) + pm_qos_update_request(&data->int_req, freq * 16 / 1000); + else + pm_qos_update_request(&data->int_req, -1); + + if (old_freq < freq) + err = exynos5_int_setvolt(data, volt); + if (err) + goto out; + + err = clk_set_rate(data->int_clk, freq * 1000); + + if (err) + goto out; + + if (old_freq > freq) + err = exynos5_int_setvolt(data, volt); + if (err) + goto out; + + data->curr_freq = freq; +out: + mutex_unlock(&data->lock); + return err; +} + +static int exynos5_get_busier_dmc(struct busfreq_data_int *data) +{ + int i, j; + int busy = 0; + unsigned int temp = 0; + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) { + if (data->ppmu[i].count[j] > temp) { + temp = data->ppmu[i].count[j]; + busy = i; + } + } + } + + return busy; +} + +static int exynos5_int_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + int busier_dmc; + + exynos5_read_ppmu(data); + busier_dmc = exynos5_get_busier_dmc(data); + + stat->current_frequency = data->curr_freq; + + /* Number of cycles spent on memory access */ + stat->busy_time = data->ppmu[busier_dmc].count[PPMU_PMNCNT3]; + stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO; + stat->total_time = data->ppmu[busier_dmc].ccnt; + + return 0; +} +static void exynos5_int_exit(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + + devfreq_unregister_opp_notifier(dev, data->devfreq); +} + +static struct devfreq_dev_profile exynos5_devfreq_int_profile = { + .initial_freq = 160000, + .polling_ms = 100, + .target = exynos5_busfreq_int_target, + .get_dev_status = exynos5_int_get_dev_status, + .exit = exynos5_int_exit, +}; + +static int exynos5250_init_int_tables(struct busfreq_data_int *data) +{ + int i, err = 0; + + for (i = LV_0; i < _LV_END; i++) { + err = opp_add(data->dev, exynos5_int_opp_table[i].clk, + exynos5_int_opp_table[i].volt); + if (err) { + dev_err(data->dev, "Cannot add opp entries.\n"); + return err; + } + } + + return 0; +} + +static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct busfreq_data_int *data = container_of(this, + struct busfreq_data_int, pm_notifier); + struct opp *opp; + unsigned long maxfreq = ULONG_MAX; + unsigned long freq; + unsigned long volt; + int err = 0; + + switch (event) { + case PM_SUSPEND_PREPARE: + /* Set Fastest and Deactivate DVFS */ + mutex_lock(&data->lock); + + data->disabled = true; + + rcu_read_lock(); + opp = opp_find_freq_floor(data->dev, &maxfreq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + err = PTR_ERR(opp); + goto unlock; + } + freq = opp_get_freq(opp); + volt = opp_get_voltage(opp); + rcu_read_unlock(); + + err = exynos5_int_setvolt(data, volt); + if (err) + goto unlock; + + err = clk_set_rate(data->int_clk, freq * 1000); + + if (err) + goto unlock; + + data->curr_freq = freq; +unlock: + mutex_unlock(&data->lock); + if (err) + return NOTIFY_BAD; + return NOTIFY_OK; + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + /* Reactivate */ + mutex_lock(&data->lock); + data->disabled = false; + mutex_unlock(&data->lock); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static int exynos5_busfreq_int_probe(struct platform_device *pdev) +{ + struct busfreq_data_int *data; + struct opp *opp; + struct device *dev = &pdev->dev; + struct device_node *np; + unsigned long initial_freq; + unsigned long initial_volt; + int err = 0; + int i; + + data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int), + GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Cannot allocate memory.\n"); + return -ENOMEM; + } + + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu"); + if (np == NULL) { + pr_err("Unable to find PPMU node\n"); + return -ENOENT; + } + + for (i = PPMU_RIGHT; i < PPMU_END; i++) { + /* map PPMU memory region */ + data->ppmu[i].hw_base = of_iomap(np, i); + if (data->ppmu[i].hw_base == NULL) { + dev_err(&pdev->dev, "failed to map memory region\n"); + return -ENOMEM; + } + } + data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event; + data->dev = dev; + mutex_init(&data->lock); + + err = exynos5250_init_int_tables(data); + if (err) + goto err_regulator; + + data->vdd_int = regulator_get(dev, "vdd_int"); + if (IS_ERR(data->vdd_int)) { + dev_err(dev, "Cannot get the regulator \"vdd_int\"\n"); + err = PTR_ERR(data->vdd_int); + goto err_regulator; + } + + data->int_clk = clk_get(dev, "int_clk"); + if (IS_ERR(data->int_clk)) { + dev_err(dev, "Cannot get clock \"int_clk\"\n"); + err = PTR_ERR(data->int_clk); + goto err_clock; + } + + rcu_read_lock(); + opp = opp_find_freq_floor(dev, + &exynos5_devfreq_int_profile.initial_freq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(dev, "Invalid initial frequency %lu kHz.\n", + exynos5_devfreq_int_profile.initial_freq); + err = PTR_ERR(opp); + goto err_opp_add; + } + initial_freq = opp_get_freq(opp); + initial_volt = opp_get_voltage(opp); + rcu_read_unlock(); + data->curr_freq = initial_freq; + + err = clk_set_rate(data->int_clk, initial_freq * 1000); + if (err) { + dev_err(dev, "Failed to set initial frequency\n"); + goto err_opp_add; + } + + err = exynos5_int_setvolt(data, initial_volt); + if (err) + goto err_opp_add; + + platform_set_drvdata(pdev, data); + + busfreq_mon_reset(data); + + data->devfreq = devfreq_add_device(dev, &exynos5_devfreq_int_profile, + "simple_ondemand", NULL); + + if (IS_ERR(data->devfreq)) { + err = PTR_ERR(data->devfreq); + goto err_devfreq_add; + } + + devfreq_register_opp_notifier(dev, data->devfreq); + + err = register_pm_notifier(&data->pm_notifier); + if (err) { + dev_err(dev, "Failed to setup pm notifier\n"); + goto err_devfreq_add; + } + + /* TODO: Add a new QOS class for int/mif bus */ + pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1); + + return 0; + +err_devfreq_add: + devfreq_remove_device(data->devfreq); + platform_set_drvdata(pdev, NULL); +err_opp_add: + clk_put(data->int_clk); +err_clock: + regulator_put(data->vdd_int); +err_regulator: + return err; +} + +static int exynos5_busfreq_int_remove(struct platform_device *pdev) +{ + struct busfreq_data_int *data = platform_get_drvdata(pdev); + + pm_qos_remove_request(&data->int_req); + unregister_pm_notifier(&data->pm_notifier); + devfreq_remove_device(data->devfreq); + regulator_put(data->vdd_int); + clk_put(data->int_clk); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static int exynos5_busfreq_int_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, + dev); + struct busfreq_data_int *data = platform_get_drvdata(pdev); + + busfreq_mon_reset(data); + return 0; +} + +static const struct dev_pm_ops exynos5_busfreq_int_pm = { + .resume = exynos5_busfreq_int_resume, +}; + +/* platform device pointer for exynos5 devfreq device. */ +static struct platform_device *exynos5_devfreq_pdev; + +static struct platform_driver exynos5_busfreq_int_driver = { + .probe = exynos5_busfreq_int_probe, + .remove = exynos5_busfreq_int_remove, + .driver = { + .name = "exynos5-bus-int", + .owner = THIS_MODULE, + .pm = &exynos5_busfreq_int_pm, + }, +}; + +static int __init exynos5_busfreq_int_init(void) +{ + int ret; + + ret = platform_driver_register(&exynos5_busfreq_int_driver); + if (ret < 0) + goto out; + + exynos5_devfreq_pdev = + platform_device_register_simple("exynos5-bus-int", -1, NULL, 0); + if (IS_ERR_OR_NULL(exynos5_devfreq_pdev)) { + ret = PTR_ERR(exynos5_devfreq_pdev); + goto out1; + } + + return 0; +out1: + platform_driver_unregister(&exynos5_busfreq_int_driver); +out: + return ret; +} +late_initcall(exynos5_busfreq_int_init); + +static void __exit exynos5_busfreq_int_exit(void) +{ + platform_device_unregister(exynos5_devfreq_pdev); + platform_driver_unregister(&exynos5_busfreq_int_driver); +} +module_exit(exynos5_busfreq_int_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework"); diff --git a/drivers/devfreq/exynos/exynos_ppmu.c b/drivers/devfreq/exynos/exynos_ppmu.c new file mode 100644 index 0000000..85fc5ac --- /dev/null +++ b/drivers/devfreq/exynos/exynos_ppmu.c @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS - PPMU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/io.h> + +#include "exynos_ppmu.h" + +void exynos_ppmu_reset(void __iomem *ppmu_base) +{ + __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base); + __raw_writel(PPMU_ENABLE_CYCLE | + PPMU_ENABLE_COUNT0 | + PPMU_ENABLE_COUNT1 | + PPMU_ENABLE_COUNT2 | + PPMU_ENABLE_COUNT3, + ppmu_base + PPMU_CNTENS); +} + +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, + unsigned int evt) +{ + __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch)); +} + +void exynos_ppmu_start(void __iomem *ppmu_base) +{ + __raw_writel(PPMU_ENABLE, ppmu_base); +} + +void exynos_ppmu_stop(void __iomem *ppmu_base) +{ + __raw_writel(PPMU_DISABLE, ppmu_base); +} + +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch) +{ + unsigned int total; + + if (ch == PPMU_PMNCNT3) + total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) | + __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1))); + else + total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch)); + + return total; +} diff --git a/drivers/devfreq/exynos/exynos_ppmu.h b/drivers/devfreq/exynos/exynos_ppmu.h new file mode 100644 index 0000000..7dfb221 --- /dev/null +++ b/drivers/devfreq/exynos/exynos_ppmu.h @@ -0,0 +1,78 @@ +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS PPMU header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __DEVFREQ_EXYNOS_PPMU_H +#define __DEVFREQ_EXYNOS_PPMU_H __FILE__ + +#include <linux/ktime.h> + +/* For PPMU Control */ +#define PPMU_ENABLE BIT(0) +#define PPMU_DISABLE 0x0 +#define PPMU_CYCLE_RESET BIT(1) +#define PPMU_COUNTER_RESET BIT(2) + +#define PPMU_ENABLE_COUNT0 BIT(0) +#define PPMU_ENABLE_COUNT1 BIT(1) +#define PPMU_ENABLE_COUNT2 BIT(2) +#define PPMU_ENABLE_COUNT3 BIT(3) +#define PPMU_ENABLE_CYCLE BIT(31) + +#define PPMU_CNTENS 0x10 +#define PPMU_FLAG 0x50 +#define PPMU_CCNT_OVERFLOW BIT(31) +#define PPMU_CCNT 0x100 + +#define PPMU_PMCNT0 0x110 +#define PPMU_PMCNT_OFFSET 0x10 +#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x)) + +#define PPMU_BEVT0SEL 0x1000 +#define PPMU_BEVTSEL_OFFSET 0x100 +#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET)) + +/* For Event Selection */ +#define RD_DATA_COUNT 0x5 +#define WR_DATA_COUNT 0x6 +#define RDWR_DATA_COUNT 0x7 + +enum ppmu_counter { + PPMU_PMNCNT0, + PPMU_PMCCNT1, + PPMU_PMNCNT2, + PPMU_PMNCNT3, + PPMU_PMNCNT_MAX, +}; + +struct bus_opp_table { + unsigned int idx; + unsigned long clk; + unsigned long volt; +}; + +struct exynos_ppmu { + void __iomem *hw_base; + unsigned int ccnt; + unsigned int event[PPMU_PMNCNT_MAX]; + unsigned int count[PPMU_PMNCNT_MAX]; + unsigned long long ns; + ktime_t reset_time; + bool ccnt_overflow; + bool count_overflow[PPMU_PMNCNT_MAX]; +}; + +void exynos_ppmu_reset(void __iomem *ppmu_base); +void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch, + unsigned int evt); +void exynos_ppmu_start(void __iomem *ppmu_base); +void exynos_ppmu_stop(void __iomem *ppmu_base); +unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch); +#endif /* __DEVFREQ_EXYNOS_PPMU_H */ diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index a0de82e..a975ebe 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -1405,7 +1405,7 @@ static int dma_runtime_idle(struct device *dev) return -EAGAIN; } - return pm_schedule_suspend(dev, 0); + return 0; } /****************************************************************************** diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index f4b7245..bfa1af1 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -300,11 +300,7 @@ static const struct irq_domain_ops lnw_gpio_irq_ops = { static int lnw_gpio_runtime_idle(struct device *dev) { - int err = pm_schedule_suspend(dev, 500); - - if (!err) - return 0; - + pm_schedule_suspend(dev, 500); return -EBUSY; } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 48e31ed..f32ca29 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -435,7 +435,7 @@ static const struct dev_pm_ops i2c_device_pm_ops = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 13f7866..3598b0e 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -886,12 +886,6 @@ static int ab8500_gpadc_runtime_resume(struct device *dev) return ret; } -static int ab8500_gpadc_runtime_idle(struct device *dev) -{ - pm_runtime_suspend(dev); - return 0; -} - static int ab8500_gpadc_suspend(struct device *dev) { struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); @@ -1039,7 +1033,7 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) static const struct dev_pm_ops ab8500_gpadc_pm_ops = { SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, ab8500_gpadc_runtime_resume, - ab8500_gpadc_runtime_idle) + NULL) SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend, ab8500_gpadc_resume) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index a292a1d..3c157fa 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1725,9 +1725,9 @@ static long round_clock_rate(u8 clock, unsigned long rate) /* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .index = ARM_EXTCLK,}, - { .frequency = 400000, .index = ARM_50_OPP,}, - { .frequency = 800000, .index = ARM_100_OPP,}, + { .frequency = 200000, .driver_data = ARM_EXTCLK,}, + { .frequency = 400000, .driver_data = ARM_50_OPP,}, + { .frequency = 800000, .driver_data = ARM_100_OPP,}, { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ { .frequency = CPUFREQ_TABLE_END,}, }; @@ -1902,7 +1902,7 @@ static int set_armss_rate(unsigned long rate) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index); + return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].driver_data); } static int set_plldsi_rate(unsigned long rate) @@ -3106,7 +3106,7 @@ static void db8500_prcmu_update_cpufreq(void) { if (prcmu_has_arm_maxopp()) { db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].index = ARM_MAX_OPP; + db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; } } diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index e219c97..9d5c711 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -164,7 +164,7 @@ static int mmc_runtime_resume(struct device *dev) static int mmc_runtime_idle(struct device *dev) { - return pm_runtime_suspend(dev); + return 0; } #endif /* !CONFIG_PM_RUNTIME */ diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 546c67c..6d67492 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -211,7 +211,7 @@ static const struct dev_pm_ops sdio_bus_pm_ops = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 79277fb..e6515e2 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -1050,26 +1050,22 @@ static int pci_pm_runtime_idle(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + int ret = 0; /* * If pci_dev->driver is not set (unbound), the device should * always remain in D0 regardless of the runtime PM status */ if (!pci_dev->driver) - goto out; + return 0; if (!pm) return -ENOSYS; - if (pm->runtime_idle) { - int ret = pm->runtime_idle(dev); - if (ret) - return ret; - } + if (pm->runtime_idle) + ret = pm->runtime_idle(dev); -out: - pm_runtime_suspend(dev); - return 0; + return ret; } #else /* !CONFIG_PM_RUNTIME */ diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index 95cebf0..9357aa7 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -211,6 +211,12 @@ static int pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) res->start = -1; res->end = -1; + if (!rule->map) { + res->flags |= IORESOURCE_DISABLED; + pnp_dbg(&dev->dev, " dma %d disabled\n", idx); + goto __add; + } + for (i = 0; i < 8; i++) { if (rule->map & (1 << xtab[i])) { res->start = res->end = xtab[i]; @@ -218,11 +224,9 @@ static int pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) goto __add; } } -#ifdef MAX_DMA_CHANNELS - res->start = res->end = MAX_DMA_CHANNELS; -#endif - res->flags |= IORESOURCE_DISABLED; - pnp_dbg(&dev->dev, " disable dma %d\n", idx); + + pnp_dbg(&dev->dev, " couldn't assign dma %d\n", idx); + return -EBUSY; __add: pnp_add_dma_resource(dev, res->start, res->flags); diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 6b2238b..db9973b 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -27,7 +27,8 @@ #include <linux/pm_runtime.h> #include <linux/power/smartreflex.h> -#define SMARTREFLEX_NAME_LEN 16 +#define DRIVER_NAME "smartreflex" +#define SMARTREFLEX_NAME_LEN 32 #define NVALUE_NAME_LEN 40 #define SR_DISABLE_TIMEOUT 200 @@ -207,12 +208,11 @@ static void sr_stop_vddautocomp(struct omap_sr *sr) static int sr_late_init(struct omap_sr *sr_info) { struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data; - struct resource *mem; int ret = 0; if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { - ret = request_irq(sr_info->irq, sr_interrupt, - 0, sr_info->name, sr_info); + ret = devm_request_irq(&sr_info->pdev->dev, sr_info->irq, + sr_interrupt, 0, sr_info->name, sr_info); if (ret) goto error; disable_irq(sr_info->irq); @@ -224,14 +224,10 @@ static int sr_late_init(struct omap_sr *sr_info) return ret; error: - iounmap(sr_info->base); - mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); list_del(&sr_info->node); dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" "interrupt handler. Smartreflex will" "not function as desired\n", __func__); - kfree(sr_info); return ret; } @@ -341,9 +337,9 @@ static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row( /* Public Functions */ /** - * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the + * sr_configure_errgen() - Configures the SmartReflex to perform AVS using the * error generator module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: SR module to be configured. * * This API is to be called from the smartreflex class driver to * configure the error generator module inside the smartreflex module. @@ -352,17 +348,17 @@ static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row( * SR CLASS 2 can choose between ERROR module and MINMAXAVG * module. Returns 0 on success and error value in case of failure. */ -int sr_configure_errgen(struct voltagedomain *voltdm) +int sr_configure_errgen(struct omap_sr *sr) { u32 sr_config, sr_errconfig, errconfig_offs; u32 vpboundint_en, vpboundint_st; u32 senp_en = 0, senn_en = 0; u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } if (!sr->clk_length) @@ -414,22 +410,22 @@ int sr_configure_errgen(struct voltagedomain *voltdm) /** * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: SR module to be configured. * * This API is to be called from the smartreflex class driver to * disable the error generator module inside the smartreflex module. * * Returns 0 on success and error value in case of failure. */ -int sr_disable_errgen(struct voltagedomain *voltdm) +int sr_disable_errgen(struct omap_sr *sr) { u32 errconfig_offs; u32 vpboundint_en, vpboundint_st; - struct omap_sr *sr = _sr_lookup(voltdm); - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } switch (sr->ip_type) { @@ -449,19 +445,24 @@ int sr_disable_errgen(struct voltagedomain *voltdm) return -EINVAL; } - /* Disable the interrupts of ERROR module */ - sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); - /* Disable the Sensor and errorgen */ sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0); + /* + * Disable the interrupts of ERROR module + * NOTE: modify is a read, modify,write - an implicit OCP barrier + * which is required is present here - sequencing is critical + * at this point (after errgen is disabled, vpboundint disable) + */ + sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0); + return 0; } /** - * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the + * sr_configure_minmax() - Configures the SmartReflex to perform AVS using the * minmaxavg module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: SR module to be configured. * * This API is to be called from the smartreflex class driver to * configure the minmaxavg module inside the smartreflex module. @@ -470,16 +471,16 @@ int sr_disable_errgen(struct voltagedomain *voltdm) * SR CLASS 2 can choose between ERROR module and MINMAXAVG * module. Returns 0 on success and error value in case of failure. */ -int sr_configure_minmax(struct voltagedomain *voltdm) +int sr_configure_minmax(struct omap_sr *sr) { u32 sr_config, sr_avgwt; u32 senp_en = 0, senn_en = 0; u8 senp_shift, senn_shift; - struct omap_sr *sr = _sr_lookup(voltdm); - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } if (!sr->clk_length) @@ -546,7 +547,7 @@ int sr_configure_minmax(struct voltagedomain *voltdm) /** * sr_enable() - Enables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: pointer to which the SR module to be configured belongs to. * @volt: The voltage at which the Voltage domain associated with * the smartreflex module is operating at. * This is required only to program the correct Ntarget value. @@ -555,16 +556,16 @@ int sr_configure_minmax(struct voltagedomain *voltdm) * enable a smartreflex module. Returns 0 on success. Returns error * value if the voltage passed is wrong or if ntarget value is wrong. */ -int sr_enable(struct voltagedomain *voltdm, unsigned long volt) +int sr_enable(struct omap_sr *sr, unsigned long volt) { struct omap_volt_data *volt_data; - struct omap_sr *sr = _sr_lookup(voltdm); struct omap_sr_nvalue_table *nvalue_row; int ret; - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); - return PTR_ERR(sr); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); + return -EINVAL; } volt_data = omap_voltage_get_voltdata(sr->voltdm, volt); @@ -606,17 +607,16 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt) /** * sr_disable() - Disables the smartreflex module. - * @voltdm: VDD pointer to which the SR module to be configured belongs to. + * @sr: pointer to which the SR module to be configured belongs to. * * This API is to be called from the smartreflex class driver to * disable a smartreflex module. */ -void sr_disable(struct voltagedomain *voltdm) +void sr_disable(struct omap_sr *sr) { - struct omap_sr *sr = _sr_lookup(voltdm); - - if (IS_ERR(sr)) { - pr_warning("%s: omap_sr struct for voltdm not found\n", __func__); + if (!sr) { + pr_warn("%s: NULL omap_sr from %pF\n", __func__, + (void *)_RET_IP_); return; } @@ -847,34 +847,33 @@ static int __init omap_sr_probe(struct platform_device *pdev) struct dentry *nvalue_dir; int i, ret = 0; - sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); + sr_info = devm_kzalloc(&pdev->dev, sizeof(struct omap_sr), GFP_KERNEL); if (!sr_info) { dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", __func__); return -ENOMEM; } + sr_info->name = devm_kzalloc(&pdev->dev, + SMARTREFLEX_NAME_LEN, GFP_KERNEL); + if (!sr_info->name) { + dev_err(&pdev->dev, "%s: unable to allocate SR instance name\n", + __func__); + return -ENOMEM; + } + platform_set_drvdata(pdev, sr_info); if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - ret = -EINVAL; - goto err_free_devinfo; + return -EINVAL; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem resource\n", __func__); - ret = -ENODEV; - goto err_free_devinfo; - } - - mem = request_mem_region(mem->start, resource_size(mem), - dev_name(&pdev->dev)); - if (!mem) { - dev_err(&pdev->dev, "%s: no mem region\n", __func__); - ret = -EBUSY; - goto err_free_devinfo; + sr_info->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(sr_info->base)) { + dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); + return PTR_ERR(sr_info->base); } irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -882,13 +881,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_irq_safe(&pdev->dev); - sr_info->name = kasprintf(GFP_KERNEL, "%s", pdata->name); - if (!sr_info->name) { - dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n", - __func__); - ret = -ENOMEM; - goto err_release_region; - } + snprintf(sr_info->name, SMARTREFLEX_NAME_LEN, "%s", pdata->name); sr_info->pdev = pdev; sr_info->srid = pdev->id; @@ -905,13 +898,6 @@ static int __init omap_sr_probe(struct platform_device *pdev) sr_info->autocomp_active = false; sr_info->ip_type = pdata->ip_type; - sr_info->base = ioremap(mem->start, resource_size(mem)); - if (!sr_info->base) { - dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); - ret = -ENOMEM; - goto err_free_name; - } - if (irq) sr_info->irq = irq->start; @@ -927,7 +913,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - goto err_iounmap; + goto err_list_del; } } @@ -938,7 +924,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = PTR_ERR(sr_dbg_dir); pr_err("%s:sr debugfs dir creation failed(%d)\n", __func__, ret); - goto err_iounmap; + goto err_list_del; } } @@ -991,16 +977,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) err_debugfs: debugfs_remove_recursive(sr_info->dbg_dir); -err_iounmap: +err_list_del: list_del(&sr_info->node); - iounmap(sr_info->base); -err_free_name: - kfree(sr_info->name); -err_release_region: - release_mem_region(mem->start, resource_size(mem)); -err_free_devinfo: - kfree(sr_info); - return ret; } @@ -1008,7 +986,6 @@ static int omap_sr_remove(struct platform_device *pdev) { struct omap_sr_data *pdata = pdev->dev.platform_data; struct omap_sr *sr_info; - struct resource *mem; if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); @@ -1027,13 +1004,8 @@ static int omap_sr_remove(struct platform_device *pdev) if (sr_info->dbg_dir) debugfs_remove_recursive(sr_info->dbg_dir); + pm_runtime_disable(&pdev->dev); list_del(&sr_info->node); - iounmap(sr_info->base); - kfree(sr_info->name); - kfree(sr_info); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - return 0; } @@ -1064,7 +1036,7 @@ static struct platform_driver smartreflex_driver = { .remove = omap_sr_remove, .shutdown = omap_sr_shutdown, .driver = { - .name = "smartreflex", + .name = DRIVER_NAME, }, }; diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index 42539ee..4c5aabe 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -229,8 +229,6 @@ static int scsi_runtime_resume(struct device *dev) static int scsi_runtime_idle(struct device *dev) { - int err; - dev_dbg(dev, "scsi_runtime_idle\n"); /* Insert hooks here for targets, hosts, and transport classes */ @@ -240,14 +238,11 @@ static int scsi_runtime_idle(struct device *dev) if (sdev->request_queue->dev) { pm_runtime_mark_last_busy(dev); - err = pm_runtime_autosuspend(dev); - } else { - err = pm_runtime_suspend(dev); + pm_runtime_autosuspend(dev); + return -EBUSY; } - } else { - err = pm_runtime_suspend(dev); } - return err; + return 0; } int scsi_autopm_get_device(struct scsi_device *sdev) diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 7715de2..7472785 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -63,12 +63,12 @@ void clk_rate_table_build(struct clk *clk, else freq = clk->parent->rate * mult / div; - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = freq; } /* Termination entry */ - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; } diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c index afe9282..8afa5a4 100644 --- a/drivers/sh/pm_runtime.c +++ b/drivers/sh/pm_runtime.c @@ -25,7 +25,7 @@ static int default_platform_runtime_idle(struct device *dev) { /* suspend synchronously to disable clocks immediately */ - return pm_runtime_suspend(dev); + return 0; } static struct dev_pm_domain default_pm_domain = { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 32b7bb1..095cfad 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -223,7 +223,7 @@ static const struct dev_pm_ops spi_pm = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index c6dc184..119d486 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -20,6 +20,7 @@ #include <asm/cacheflush.h> #include <linux/fdtable.h> #include <linux/file.h> +#include <linux/freezer.h> #include <linux/fs.h> #include <linux/list.h> #include <linux/miscdevice.h> @@ -2140,13 +2141,13 @@ retry: if (!binder_has_proc_work(proc, thread)) ret = -EAGAIN; } else - ret = wait_event_interruptible_exclusive(proc->wait, binder_has_proc_work(proc, thread)); + ret = wait_event_freezable_exclusive(proc->wait, binder_has_proc_work(proc, thread)); } else { if (non_block) { if (!binder_has_thread_work(thread)) ret = -EAGAIN; } else - ret = wait_event_interruptible(thread->wait, binder_has_thread_work(thread)); + ret = wait_event_freezable(thread->wait, binder_has_thread_work(thread)); } binder_lock(__func__); diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index e266eca..4a82267 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -1252,13 +1252,8 @@ static int serial_hsu_resume(struct pci_dev *pdev) #ifdef CONFIG_PM_RUNTIME static int serial_hsu_runtime_idle(struct device *dev) { - int err; - - err = pm_schedule_suspend(dev, 500); - if (err) - return -EBUSY; - - return 0; + pm_schedule_suspend(dev, 500); + return -EBUSY; } static int serial_hsu_runtime_suspend(struct device *dev) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 6eab440..7609ac4 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1765,7 +1765,8 @@ int usb_runtime_idle(struct device *dev) */ if (autosuspend_check(udev) == 0) pm_runtime_autosuspend(dev); - return 0; + /* Tell the core not to suspend it, though. */ + return -EBUSY; } int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 5fd3fee..d6b0fad 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -141,7 +141,6 @@ static const struct dev_pm_ops usb_port_pm_ops = { #ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_port_runtime_suspend, .runtime_resume = usb_port_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, #endif }; |