diff options
Diffstat (limited to 'drivers')
107 files changed, 1536 insertions, 938 deletions
diff --git a/drivers/base/topology.c b/drivers/base/topology.c index c2d6216..3ef9d51 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -139,7 +139,7 @@ static int __cpuinit topology_sysfs_init(void) (void *)(long)i); } - register_cpu_notifier(&topology_cpu_notifier); + register_hotcpu_notifier(&topology_cpu_notifier); return 0; } diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 0a1b1ea..bdbade9 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -300,6 +300,15 @@ static struct request *nbd_read_stat(struct nbd_device *lo) lo->disk->disk_name, result); goto harderror; } + + if (ntohl(reply.magic) != NBD_REPLY_MAGIC) { + printk(KERN_ERR "%s: Wrong magic (0x%lx)\n", + lo->disk->disk_name, + (unsigned long)ntohl(reply.magic)); + result = -EPROTO; + goto harderror; + } + req = nbd_find_request(lo, reply.handle); if (unlikely(IS_ERR(req))) { result = PTR_ERR(req); @@ -312,13 +321,6 @@ static struct request *nbd_read_stat(struct nbd_device *lo) goto harderror; } - if (ntohl(reply.magic) != NBD_REPLY_MAGIC) { - printk(KERN_ERR "%s: Wrong magic (0x%lx)\n", - lo->disk->disk_name, - (unsigned long)ntohl(reply.magic)); - result = -EPROTO; - goto harderror; - } if (ntohl(reply.error)) { printk(KERN_ERR "%s: Other side returned error (%d)\n", lo->disk->disk_name, ntohl(reply.error)); @@ -339,7 +341,8 @@ static struct request *nbd_read_stat(struct nbd_device *lo) printk(KERN_ERR "%s: Receive data failed (result %d)\n", lo->disk->disk_name, result); - goto harderror; + req->errors++; + return req; } dprintk(DBG_RX, "%s: request %p: got %d bytes data\n", lo->disk->disk_name, req, bvec->bv_len); diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index bde2c64..451b996 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -2577,19 +2577,19 @@ static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cm case PKT_CTRL_CMD_SETUP: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - mutex_lock(&ctl_mutex); + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); ret = pkt_setup_dev(&ctrl_cmd); mutex_unlock(&ctl_mutex); break; case PKT_CTRL_CMD_TEARDOWN: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - mutex_lock(&ctl_mutex); + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); ret = pkt_remove_dev(&ctrl_cmd); mutex_unlock(&ctl_mutex); break; case PKT_CTRL_CMD_STATUS: - mutex_lock(&ctl_mutex); + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); pkt_get_status(&ctrl_cmd); mutex_unlock(&ctl_mutex); break; diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c index be61f22..d37ced0 100644 --- a/drivers/char/hw_random/geode-rng.c +++ b/drivers/char/hw_random/geode-rng.c @@ -107,10 +107,14 @@ found: if (err) { printk(KERN_ERR PFX "RNG registering failed (%d)\n", err); - goto out; + goto err_unmap; } out: return err; + +err_unmap: + iounmap(mem); + goto out; } static void __exit mod_exit(void) diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 6594bd5..ccd7e71 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -164,7 +164,7 @@ static int __init mod_init(void) if (err) { printk(KERN_ERR PFX "RNG registering failed (%d)\n", err); - goto out; + goto err_unmap; } out: return err; diff --git a/drivers/char/pc8736x_gpio.c b/drivers/char/pc8736x_gpio.c index 645eb81..84e5a68 100644 --- a/drivers/char/pc8736x_gpio.c +++ b/drivers/char/pc8736x_gpio.c @@ -221,7 +221,6 @@ static struct nsc_gpio_ops pc8736x_gpio_ops = { .gpio_change = pc8736x_gpio_change, .gpio_current = pc8736x_gpio_current }; -EXPORT_SYMBOL(pc8736x_gpio_ops); static int pc8736x_gpio_open(struct inode *inode, struct file *file) { diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 498aa37..3ece692 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -51,6 +51,7 @@ void proc_fork_connector(struct task_struct *task) struct cn_msg *msg; struct proc_event *ev; __u8 buffer[CN_PROC_MSG_SIZE]; + struct timespec ts; if (atomic_read(&proc_event_num_listeners) < 1) return; @@ -58,7 +59,8 @@ void proc_fork_connector(struct task_struct *task) msg = (struct cn_msg*)buffer; ev = (struct proc_event*)msg->data; get_seq(&msg->seq, &ev->cpu); - ktime_get_ts(&ev->timestamp); /* get high res monotonic timestamp */ + ktime_get_ts(&ts); /* get high res monotonic timestamp */ + ev->timestamp_ns = timespec_to_ns(&ts); ev->what = PROC_EVENT_FORK; ev->event_data.fork.parent_pid = task->real_parent->pid; ev->event_data.fork.parent_tgid = task->real_parent->tgid; @@ -76,6 +78,7 @@ void proc_exec_connector(struct task_struct *task) { struct cn_msg *msg; struct proc_event *ev; + struct timespec ts; __u8 buffer[CN_PROC_MSG_SIZE]; if (atomic_read(&proc_event_num_listeners) < 1) @@ -84,7 +87,8 @@ void proc_exec_connector(struct task_struct *task) msg = (struct cn_msg*)buffer; ev = (struct proc_event*)msg->data; get_seq(&msg->seq, &ev->cpu); - ktime_get_ts(&ev->timestamp); + ktime_get_ts(&ts); /* get high res monotonic timestamp */ + ev->timestamp_ns = timespec_to_ns(&ts); ev->what = PROC_EVENT_EXEC; ev->event_data.exec.process_pid = task->pid; ev->event_data.exec.process_tgid = task->tgid; @@ -100,6 +104,7 @@ void proc_id_connector(struct task_struct *task, int which_id) struct cn_msg *msg; struct proc_event *ev; __u8 buffer[CN_PROC_MSG_SIZE]; + struct timespec ts; if (atomic_read(&proc_event_num_listeners) < 1) return; @@ -118,7 +123,8 @@ void proc_id_connector(struct task_struct *task, int which_id) } else return; get_seq(&msg->seq, &ev->cpu); - ktime_get_ts(&ev->timestamp); + ktime_get_ts(&ts); /* get high res monotonic timestamp */ + ev->timestamp_ns = timespec_to_ns(&ts); memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ @@ -131,6 +137,7 @@ void proc_exit_connector(struct task_struct *task) struct cn_msg *msg; struct proc_event *ev; __u8 buffer[CN_PROC_MSG_SIZE]; + struct timespec ts; if (atomic_read(&proc_event_num_listeners) < 1) return; @@ -138,7 +145,8 @@ void proc_exit_connector(struct task_struct *task) msg = (struct cn_msg*)buffer; ev = (struct proc_event*)msg->data; get_seq(&msg->seq, &ev->cpu); - ktime_get_ts(&ev->timestamp); + ktime_get_ts(&ts); /* get high res monotonic timestamp */ + ev->timestamp_ns = timespec_to_ns(&ts); ev->what = PROC_EVENT_EXIT; ev->event_data.exit.process_pid = task->pid; ev->event_data.exit.process_tgid = task->tgid; @@ -164,6 +172,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) struct cn_msg *msg; struct proc_event *ev; __u8 buffer[CN_PROC_MSG_SIZE]; + struct timespec ts; if (atomic_read(&proc_event_num_listeners) < 1) return; @@ -171,7 +180,8 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) msg = (struct cn_msg*)buffer; ev = (struct proc_event*)msg->data; msg->seq = rcvd_seq; - ktime_get_ts(&ev->timestamp); + ktime_get_ts(&ts); /* get high res monotonic timestamp */ + ev->timestamp_ns = timespec_to_ns(&ts); ev->cpu = -1; ev->what = PROC_EVENT_NONE; ev->event_data.ack.err = err; diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d1266fe..b6fb167 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -682,6 +682,7 @@ config BLK_DEV_SVWKS config BLK_DEV_SGIIOC4 tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support" depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4 + select IDEPCI_SHARE_IRQ help This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4 chipset, which has one channel and can support two devices. @@ -773,20 +774,6 @@ config BLK_DEV_IDEDMA_PMAC to transfer data to and from memory. Saying Y is safe and improves performance. -config BLK_DEV_IDE_PMAC_BLINK - bool "Blink laptop LED on drive activity (DEPRECATED)" - depends on BLK_DEV_IDE_PMAC && ADB_PMU - select ADB_PMU_LED - select LEDS_TRIGGERS - select LEDS_TRIGGER_IDE_DISK - help - This option enables the use of the sleep LED as a hard drive - activity LED. - This option is deprecated, it only selects ADB_PMU_LED and - LEDS_TRIGGER_IDE_DISK and changes the code in the new led class - device to default to the ide-disk trigger (which should be set - from userspace via sysfs). - config BLK_DEV_IDE_SWARM tristate "IDE for Sibyte evaluation boards" depends on SIBYTE_SB1xxx_SOC diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 6571652..77703ac 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -23,6 +23,7 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/bitops.h> +#include <linux/nmi.h> #include <asm/byteorder.h> #include <asm/irq.h> @@ -1243,6 +1244,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout) if (stat == 0xff) return -ENODEV; touch_softlockup_watchdog(); + touch_nmi_watchdog(); } return -EBUSY; } diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index d294bbc..1205e80 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -35,6 +35,7 @@ #include <net/arp.h> #include <net/neighbour.h> #include <net/route.h> +#include <net/netevent.h> #include <rdma/ib_addr.h> MODULE_AUTHOR("Sean Hefty"); @@ -326,25 +327,22 @@ void rdma_addr_cancel(struct rdma_dev_addr *addr) } EXPORT_SYMBOL(rdma_addr_cancel); -static int addr_arp_recv(struct sk_buff *skb, struct net_device *dev, - struct packet_type *pkt, struct net_device *orig_dev) +static int netevent_callback(struct notifier_block *self, unsigned long event, + void *ctx) { - struct arphdr *arp_hdr; + if (event == NETEVENT_NEIGH_UPDATE) { + struct neighbour *neigh = ctx; - arp_hdr = (struct arphdr *) skb->nh.raw; - - if (arp_hdr->ar_op == htons(ARPOP_REQUEST) || - arp_hdr->ar_op == htons(ARPOP_REPLY)) - set_timeout(jiffies); - - kfree_skb(skb); + if (neigh->dev->type == ARPHRD_INFINIBAND && + (neigh->nud_state & NUD_VALID)) { + set_timeout(jiffies); + } + } return 0; } -static struct packet_type addr_arp = { - .type = __constant_htons(ETH_P_ARP), - .func = addr_arp_recv, - .af_packet_priv = (void*) 1, +static struct notifier_block nb = { + .notifier_call = netevent_callback }; static int addr_init(void) @@ -353,13 +351,13 @@ static int addr_init(void) if (!addr_wq) return -ENOMEM; - dev_add_pack(&addr_arp); + register_netevent_notifier(&nb); return 0; } static void addr_cleanup(void) { - dev_remove_pack(&addr_arp); + unregister_netevent_notifier(&nb); destroy_workqueue(addr_wq); } diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index f85c97f..0de335b 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -975,8 +975,10 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, cm_id_priv->timewait_info = cm_create_timewait_info(cm_id_priv-> id.local_id); - if (IS_ERR(cm_id_priv->timewait_info)) + if (IS_ERR(cm_id_priv->timewait_info)) { + ret = PTR_ERR(cm_id_priv->timewait_info); goto out; + } ret = cm_init_av_by_path(param->primary_path, &cm_id_priv->av); if (ret) diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index bb9bee5..102a59c 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -42,6 +42,7 @@ #include <linux/kref.h> #include <linux/idr.h> #include <linux/mutex.h> +#include <linux/completion.h> #include <rdma/ib_verbs.h> #include <rdma/ib_user_verbs.h> @@ -69,6 +70,7 @@ struct ib_uverbs_device { struct kref ref; + struct completion comp; int devnum; struct cdev *dev; struct class_device *class_dev; diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index e725ccc..4e16314 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -122,7 +122,7 @@ static void ib_uverbs_release_dev(struct kref *ref) struct ib_uverbs_device *dev = container_of(ref, struct ib_uverbs_device, ref); - kfree(dev); + complete(&dev->comp); } void ib_uverbs_release_ucq(struct ib_uverbs_file *file, @@ -740,6 +740,7 @@ static void ib_uverbs_add_one(struct ib_device *device) return; kref_init(&uverbs_dev->ref); + init_completion(&uverbs_dev->comp); spin_lock(&map_lock); uverbs_dev->devnum = find_first_zero_bit(dev_map, IB_UVERBS_MAX_DEVICES); @@ -793,6 +794,8 @@ err_cdev: err: kref_put(&uverbs_dev->ref, ib_uverbs_release_dev); + wait_for_completion(&uverbs_dev->comp); + kfree(uverbs_dev); return; } @@ -812,7 +815,10 @@ static void ib_uverbs_remove_one(struct ib_device *device) spin_unlock(&map_lock); clear_bit(uverbs_dev->devnum, dev_map); + kref_put(&uverbs_dev->ref, ib_uverbs_release_dev); + wait_for_completion(&uverbs_dev->comp); + kfree(uverbs_dev); } static int uverbs_event_get_sb(struct file_system_type *fs_type, int flags, diff --git a/drivers/infiniband/hw/mthca/mthca_allocator.c b/drivers/infiniband/hw/mthca/mthca_allocator.c index 9ba3211..25157f5 100644 --- a/drivers/infiniband/hw/mthca/mthca_allocator.c +++ b/drivers/infiniband/hw/mthca/mthca_allocator.c @@ -108,14 +108,15 @@ void mthca_alloc_cleanup(struct mthca_alloc *alloc) * serialize access to the array. */ +#define MTHCA_ARRAY_MASK (PAGE_SIZE / sizeof (void *) - 1) + void *mthca_array_get(struct mthca_array *array, int index) { int p = (index * sizeof (void *)) >> PAGE_SHIFT; - if (array->page_list[p].page) { - int i = index & (PAGE_SIZE / sizeof (void *) - 1); - return array->page_list[p].page[i]; - } else + if (array->page_list[p].page) + return array->page_list[p].page[index & MTHCA_ARRAY_MASK]; + else return NULL; } @@ -130,8 +131,7 @@ int mthca_array_set(struct mthca_array *array, int index, void *value) if (!array->page_list[p].page) return -ENOMEM; - array->page_list[p].page[index & (PAGE_SIZE / sizeof (void *) - 1)] = - value; + array->page_list[p].page[index & MTHCA_ARRAY_MASK] = value; ++array->page_list[p].used; return 0; @@ -144,7 +144,8 @@ void mthca_array_clear(struct mthca_array *array, int index) if (--array->page_list[p].used == 0) { free_page((unsigned long) array->page_list[p].page); array->page_list[p].page = NULL; - } + } else + array->page_list[p].page[index & MTHCA_ARRAY_MASK] = NULL; if (array->page_list[p].used < 0) pr_debug("Array %p index %d page %d with ref count %d < 0\n", diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index 13d6d01..d74653d 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -6,8 +6,7 @@ config INFINIBAND_IPOIB transports IP packets over InfiniBand so you can use your IB device as a fancy NIC. - The IPoIB protocol is defined by the IETF ipoib working - group: <http://www.ietf.org/html.charters/ipoib-charter.html>. + See Documentation/infiniband/ipoib.txt for more information config INFINIBAND_IPOIB_DEBUG bool "IP-over-InfiniBand debugging" if EMBEDDED diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 8f472e7..8257d5a 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -77,6 +77,14 @@ MODULE_PARM_DESC(topspin_workarounds, static const u8 topspin_oui[3] = { 0x00, 0x05, 0xad }; +static int mellanox_workarounds = 1; + +module_param(mellanox_workarounds, int, 0444); +MODULE_PARM_DESC(mellanox_workarounds, + "Enable workarounds for Mellanox SRP target bugs if != 0"); + +static const u8 mellanox_oui[3] = { 0x00, 0x02, 0xc9 }; + static void srp_add_one(struct ib_device *device); static void srp_remove_one(struct ib_device *device); static void srp_completion(struct ib_cq *cq, void *target_ptr); @@ -526,8 +534,10 @@ static int srp_reconnect_target(struct srp_target_port *target) while (ib_poll_cq(target->cq, 1, &wc) > 0) ; /* nothing */ + spin_lock_irq(target->scsi_host->host_lock); list_for_each_entry_safe(req, tmp, &target->req_queue, list) srp_reset_req(target, req); + spin_unlock_irq(target->scsi_host->host_lock); target->rx_head = 0; target->tx_head = 0; @@ -567,7 +577,7 @@ err: return ret; } -static int srp_map_fmr(struct srp_device *dev, struct scatterlist *scat, +static int srp_map_fmr(struct srp_target_port *target, struct scatterlist *scat, int sg_cnt, struct srp_request *req, struct srp_direct_buf *buf) { @@ -577,10 +587,15 @@ static int srp_map_fmr(struct srp_device *dev, struct scatterlist *scat, int page_cnt; int i, j; int ret; + struct srp_device *dev = target->srp_host->dev; if (!dev->fmr_pool) return -ENODEV; + if ((sg_dma_address(&scat[0]) & ~dev->fmr_page_mask) && + mellanox_workarounds && !memcmp(&target->ioc_guid, mellanox_oui, 3)) + return -EINVAL; + len = page_cnt = 0; for (i = 0; i < sg_cnt; ++i) { if (sg_dma_address(&scat[i]) & ~dev->fmr_page_mask) { @@ -683,7 +698,7 @@ static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_target_port *target, buf->va = cpu_to_be64(sg_dma_address(scat)); buf->key = cpu_to_be32(target->srp_host->dev->mr->rkey); buf->len = cpu_to_be32(sg_dma_len(scat)); - } else if (srp_map_fmr(target->srp_host->dev, scat, count, req, + } else if (srp_map_fmr(target, scat, count, req, (void *) cmd->add_data)) { /* * FMR mapping failed, and the scatterlist has more diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f5fe7fb..d5d649f 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -90,6 +90,15 @@ config ADB_PMU_LED and the ide-disk LED trigger and configure appropriately through sysfs. +config ADB_PMU_LED_IDE + bool "Use front LED as IDE LED by default" + depends on ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK + help + This option makes the front LED default to the IDE trigger + so that it blinks on IDE activity. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 @@ -100,7 +109,7 @@ config PMAC_SMU config PMAC_APM_EMU tristate "APM emulation" - depends on PPC_PMAC && PPC32 && PM + depends on PPC_PMAC && PPC32 && PM && ADB_PMU config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" @@ -115,8 +124,6 @@ config PMAC_BACKLIGHT bool "Backlight control for LCD screens" depends on ADB_PMU && FB = y && (BROKEN || !PPC64) select FB_BACKLIGHT - select BACKLIGHT_CLASS_DEVICE - select BACKLIGHT_LCD_SUPPORT help Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index 545be1e..c69d23b 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -45,14 +45,11 @@ #include <linux/pmu.h> #include <asm/machdep.h> +#include <asm/backlight.h> #ifdef CONFIG_PPC_PMAC #include <asm/pmac_feature.h> #endif -#ifdef CONFIG_PMAC_BACKLIGHT -#include <asm/backlight.h> -#endif - MODULE_AUTHOR("Franz Sirl <Franz.Sirl-kernel@lauterbach.com>"); #define KEYB_KEYREG 0 /* register # for key up/down data */ @@ -237,11 +234,6 @@ static struct adb_ids keyboard_ids; static struct adb_ids mouse_ids; static struct adb_ids buttons_ids; -#ifdef CONFIG_PMAC_BACKLIGHT -/* Exported to via-pmu.c */ -int disable_kernel_backlight = 0; -#endif /* CONFIG_PMAC_BACKLIGHT */ - /* Kind of keyboard, see Apple technote 1152 */ #define ADB_KEYBOARD_UNKNOWN 0 #define ADB_KEYBOARD_ANSI 0x0100 @@ -527,7 +519,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0xa: /* brightness decrease */ #ifdef CONFIG_PMAC_BACKLIGHT - if (!disable_kernel_backlight && down) + if (down) pmac_backlight_key_down(); #endif input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); @@ -535,7 +527,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0x9: /* brightness increase */ #ifdef CONFIG_PMAC_BACKLIGHT - if (!disable_kernel_backlight && down) + if (down) pmac_backlight_key_up(); #endif input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down); diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index c1fe0b3..20bf672 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -95,6 +95,17 @@ * - Use min/max macros here or there * - Latest darwin updated U3H min fan speed to 20% PWM * + * July. 06, 2006 : 1.3 + * - Fix setting of RPM fans on Xserve G5 (they were going too fast) + * - Add missing slots fan control loop for Xserve G5 + * - Lower fixed slots fan speed from 50% to 40% on desktop G5s. We + * still can't properly implement the control loop for these, so let's + * reduce the noise a little bit, it appears that 40% still gives us + * a pretty good air flow + * - Add code to "tickle" the FCU regulary so it doesn't think that + * we are gone while in fact, the machine just didn't need any fan + * speed change lately + * */ #include <linux/types.h> @@ -121,7 +132,7 @@ #include "therm_pm72.h" -#define VERSION "1.2b2" +#define VERSION "1.3" #undef DEBUG @@ -146,6 +157,7 @@ static struct basckside_pid_params backside_params; static struct backside_pid_state backside_state; static struct drives_pid_state drives_state; static struct dimm_pid_state dimms_state; +static struct slots_pid_state slots_state; static int state; static int cpu_count; static int cpu_pid_type; @@ -154,7 +166,8 @@ static struct completion ctrl_complete; static int critical_state; static int rackmac; static s32 dimm_output_clamp; - +static int fcu_rpm_shift; +static int fcu_tickle_ticks; static DECLARE_MUTEX(driver_lock); /* @@ -495,13 +508,20 @@ static int start_fcu(void) rc = fan_write_reg(0x2e, &buf, 1); if (rc < 0) return -EIO; + rc = fan_read_reg(0, &buf, 1); + if (rc < 0) + return -EIO; + fcu_rpm_shift = (buf == 1) ? 2 : 3; + printk(KERN_DEBUG "FCU Initialized, RPM fan shift is %d\n", + fcu_rpm_shift); + return 0; } static int set_rpm_fan(int fan_index, int rpm) { unsigned char buf[2]; - int rc, id; + int rc, id, min, max; if (fcu_fans[fan_index].type != FCU_FAN_RPM) return -EINVAL; @@ -509,12 +529,15 @@ static int set_rpm_fan(int fan_index, int rpm) if (id == FCU_FAN_ABSENT_ID) return -EINVAL; - if (rpm < 300) - rpm = 300; - else if (rpm > 8191) - rpm = 8191; - buf[0] = rpm >> 5; - buf[1] = rpm << 3; + min = 2400 >> fcu_rpm_shift; + max = 56000 >> fcu_rpm_shift; + + if (rpm < min) + rpm = min; + else if (rpm > max) + rpm = max; + buf[0] = rpm >> (8 - fcu_rpm_shift); + buf[1] = rpm << fcu_rpm_shift; rc = fan_write_reg(0x10 + (id * 2), buf, 2); if (rc < 0) return -EIO; @@ -551,7 +574,7 @@ static int get_rpm_fan(int fan_index, int programmed) if (rc != 2) return -EIO; - return (buf[0] << 5) | buf[1] >> 3; + return (buf[0] << (8 - fcu_rpm_shift)) | buf[1] >> fcu_rpm_shift; } static int set_pwm_fan(int fan_index, int pwm) @@ -609,6 +632,26 @@ static int get_pwm_fan(int fan_index) return (buf[0] * 1000) / 2559; } +static void tickle_fcu(void) +{ + int pwm; + + pwm = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + + DBG("FCU Tickle, slots fan is: %d\n", pwm); + if (pwm < 0) + pwm = 100; + + if (!rackmac) { + pwm = SLOTS_FAN_DEFAULT_PWM; + } else if (pwm < SLOTS_PID_OUTPUT_MIN) + pwm = SLOTS_PID_OUTPUT_MIN; + + /* That is hopefully enough to make the FCU happy */ + set_pwm_fan(SLOTS_FAN_PWM_INDEX, pwm); +} + + /* * Utility routine to read the CPU calibration EEPROM data * from the device-tree @@ -715,6 +758,9 @@ BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm) BUILD_SHOW_FUNC_FIX(drives_temperature, drives_state.last_temp) BUILD_SHOW_FUNC_INT(drives_fan_rpm, drives_state.rpm) +BUILD_SHOW_FUNC_FIX(slots_temperature, slots_state.last_temp) +BUILD_SHOW_FUNC_INT(slots_fan_pwm, slots_state.pwm) + BUILD_SHOW_FUNC_FIX(dimms_temperature, dimms_state.last_temp) static DEVICE_ATTR(cpu0_temperature,S_IRUGO,show_cpu0_temperature,NULL); @@ -735,6 +781,9 @@ static DEVICE_ATTR(backside_fan_pwm,S_IRUGO,show_backside_fan_pwm,NULL); static DEVICE_ATTR(drives_temperature,S_IRUGO,show_drives_temperature,NULL); static DEVICE_ATTR(drives_fan_rpm,S_IRUGO,show_drives_fan_rpm,NULL); +static DEVICE_ATTR(slots_temperature,S_IRUGO,show_slots_temperature,NULL); +static DEVICE_ATTR(slots_fan_pwm,S_IRUGO,show_slots_fan_pwm,NULL); + static DEVICE_ATTR(dimms_temperature,S_IRUGO,show_dimms_temperature,NULL); /* @@ -1076,6 +1125,9 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state) fan_min = dimm_output_clamp; fan_min = max(fan_min, (int)state->mpu.rminn_intake_fan); + DBG(" CPU min mpu = %d, min dimm = %d\n", + state->mpu.rminn_intake_fan, dimm_output_clamp); + state->rpm = max(state->rpm, (int)fan_min); state->rpm = min(state->rpm, (int)state->mpu.rmaxn_intake_fan); state->intake_rpm = state->rpm; @@ -1374,7 +1426,8 @@ static void do_monitor_drives(struct drives_pid_state *state) DBG(" current rpm: %d\n", state->rpm); /* Get some sensor readings */ - temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, DS1775_TEMP)) << 8; + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; state->last_temp = temp; DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), FIX32TOPRINT(DRIVES_PID_INPUT_TARGET)); @@ -1575,7 +1628,7 @@ static int init_dimms_state(struct dimm_pid_state *state) } /* - * Dispose of the state data for the drives control loop + * Dispose of the state data for the DIMM control loop */ static void dispose_dimms_state(struct dimm_pid_state *state) { @@ -1588,6 +1641,127 @@ static void dispose_dimms_state(struct dimm_pid_state *state) state->monitor = NULL; } +/* + * Slots fan control loop + */ +static void do_monitor_slots(struct slots_pid_state *state) +{ + s32 temp, integral, derivative; + s64 integ_p, deriv_p, prop_p, sum; + int i, rc; + + if (--state->ticks != 0) + return; + state->ticks = SLOTS_PID_INTERVAL; + + DBG("slots:\n"); + + /* Check fan status */ + rc = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + if (rc < 0) { + printk(KERN_WARNING "Error %d reading slots fan !\n", rc); + /* XXX What do we do now ? */ + } else + state->pwm = rc; + DBG(" current pwm: %d\n", state->pwm); + + /* Get some sensor readings */ + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; + state->last_temp = temp; + DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), + FIX32TOPRINT(SLOTS_PID_INPUT_TARGET)); + + /* Store temperature and error in history array */ + state->cur_sample = (state->cur_sample + 1) % SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = temp - SLOTS_PID_INPUT_TARGET; + + /* If first loop, fill the history table */ + if (state->first) { + for (i = 0; i < (SLOTS_PID_HISTORY_SIZE - 1); i++) { + state->cur_sample = (state->cur_sample + 1) % + SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = + temp - SLOTS_PID_INPUT_TARGET; + } + state->first = 0; + } + + /* Calculate the integral term */ + sum = 0; + integral = 0; + for (i = 0; i < SLOTS_PID_HISTORY_SIZE; i++) + integral += state->error_history[i]; + integral *= SLOTS_PID_INTERVAL; + DBG(" integral: %08x\n", integral); + integ_p = ((s64)SLOTS_PID_G_r) * (s64)integral; + DBG(" integ_p: %d\n", (int)(integ_p >> 36)); + sum += integ_p; + + /* Calculate the derivative term */ + derivative = state->error_history[state->cur_sample] - + state->error_history[(state->cur_sample + SLOTS_PID_HISTORY_SIZE - 1) + % SLOTS_PID_HISTORY_SIZE]; + derivative /= SLOTS_PID_INTERVAL; + deriv_p = ((s64)SLOTS_PID_G_d) * (s64)derivative; + DBG(" deriv_p: %d\n", (int)(deriv_p >> 36)); + sum += deriv_p; + + /* Calculate the proportional term */ + prop_p = ((s64)SLOTS_PID_G_p) * (s64)(state->error_history[state->cur_sample]); + DBG(" prop_p: %d\n", (int)(prop_p >> 36)); + sum += prop_p; + + /* Scale sum */ + sum >>= 36; + + DBG(" sum: %d\n", (int)sum); + state->pwm = (s32)sum; + + state->pwm = max(state->pwm, SLOTS_PID_OUTPUT_MIN); + state->pwm = min(state->pwm, SLOTS_PID_OUTPUT_MAX); + + DBG("** DRIVES PWM: %d\n", (int)state->pwm); + set_pwm_fan(SLOTS_FAN_PWM_INDEX, state->pwm); +} + +/* + * Initialize the state structure for the slots bay fan control loop + */ +static int init_slots_state(struct slots_pid_state *state) +{ + state->ticks = 1; + state->first = 1; + state->pwm = 50; + + state->monitor = attach_i2c_chip(XSERVE_SLOTS_LM75, "slots_temp"); + if (state->monitor == NULL) + return -ENODEV; + + device_create_file(&of_dev->dev, &dev_attr_slots_temperature); + device_create_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + return 0; +} + +/* + * Dispose of the state data for the slots control loop + */ +static void dispose_slots_state(struct slots_pid_state *state) +{ + if (state->monitor == NULL) + return; + + device_remove_file(&of_dev->dev, &dev_attr_slots_temperature); + device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + detach_i2c_chip(state->monitor); + state->monitor = NULL; +} + + static int call_critical_overtemp(void) { char *argv[] = { critical_overtemp_path, NULL }; @@ -1617,14 +1791,17 @@ static int main_control_loop(void *x) goto out; } - /* Set the PCI fan once for now */ - set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); + /* Set the PCI fan once for now on non-RackMac */ + if (!rackmac) + set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); /* Initialize ADCs */ initialize_adc(&cpu_state[0]); if (cpu_state[1].monitor != NULL) initialize_adc(&cpu_state[1]); + fcu_tickle_ticks = FCU_TICKLE_TICKS; + up(&driver_lock); while (state == state_attached) { @@ -1634,6 +1811,12 @@ static int main_control_loop(void *x) down(&driver_lock); + /* Tickle the FCU just in case */ + if (--fcu_tickle_ticks < 0) { + fcu_tickle_ticks = FCU_TICKLE_TICKS; + tickle_fcu(); + } + /* First, we always calculate the new DIMMs state on an Xserve */ if (rackmac) do_monitor_dimms(&dimms_state); @@ -1654,7 +1837,9 @@ static int main_control_loop(void *x) } /* Then, the rest */ do_monitor_backside(&backside_state); - if (!rackmac) + if (rackmac) + do_monitor_slots(&slots_state); + else do_monitor_drives(&drives_state); up(&driver_lock); @@ -1696,6 +1881,7 @@ static void dispose_control_loops(void) dispose_cpu_state(&cpu_state[1]); dispose_backside_state(&backside_state); dispose_drives_state(&drives_state); + dispose_slots_state(&slots_state); dispose_dimms_state(&dimms_state); } @@ -1745,6 +1931,8 @@ static int create_control_loops(void) goto fail; if (rackmac && init_dimms_state(&dimms_state)) goto fail; + if (rackmac && init_slots_state(&slots_state)) + goto fail; if (!rackmac && init_drives_state(&drives_state)) goto fail; diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h index fc7e9b7..393cc9d 100644 --- a/drivers/macintosh/therm_pm72.h +++ b/drivers/macintosh/therm_pm72.h @@ -105,6 +105,7 @@ static char * critical_overtemp_path = "/sbin/critical_overtemp"; #define DRIVES_DALLAS_ID 0x94 #define BACKSIDE_MAX_ID 0x98 #define XSERVE_DIMMS_LM87 0x25a +#define XSERVE_SLOTS_LM75 0x290 /* * Some MAX6690, DS1775, LM87 register definitions @@ -198,7 +199,7 @@ struct drives_pid_state #define SLOTS_FAN_PWM_DEFAULT_ID 2 #define SLOTS_FAN_PWM_INDEX 2 -#define SLOTS_FAN_DEFAULT_PWM 50 /* Do better here ! */ +#define SLOTS_FAN_DEFAULT_PWM 40 /* Do better here ! */ /* @@ -206,7 +207,7 @@ struct drives_pid_state */ #define DIMM_PID_G_d 0 #define DIMM_PID_G_p 0 -#define DIMM_PID_G_r 0x6553600 +#define DIMM_PID_G_r 0x06553600 #define DIMM_PID_INPUT_TARGET 3276800 #define DIMM_PID_INTERVAL 1 #define DIMM_PID_OUTPUT_MAX 14000 @@ -226,6 +227,31 @@ struct dimm_pid_state }; +/* + * PID factors for the Xserve Slots control loop + */ +#define SLOTS_PID_G_d 0 +#define SLOTS_PID_G_p 0 +#define SLOTS_PID_G_r 0x00100000 +#define SLOTS_PID_INPUT_TARGET 3200000 +#define SLOTS_PID_INTERVAL 1 +#define SLOTS_PID_OUTPUT_MAX 100 +#define SLOTS_PID_OUTPUT_MIN 20 +#define SLOTS_PID_HISTORY_SIZE 20 + +struct slots_pid_state +{ + int ticks; + struct i2c_client * monitor; + s32 sample_history[SLOTS_PID_HISTORY_SIZE]; + s32 error_history[SLOTS_PID_HISTORY_SIZE]; + int cur_sample; + s32 last_temp; + int first; + int pwm; +}; + + /* Desktops */ @@ -283,6 +309,9 @@ struct cpu_pid_state s32 pump_max; }; +/* Tickle FCU every 10 seconds */ +#define FCU_TICKLE_TICKS 10 + /* * Driver state */ diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index b42d05f..d3f8d75 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -15,8 +15,9 @@ #define MAX_PMU_LEVEL 0xFF -static struct device_node *vias; static struct backlight_properties pmu_backlight_data; +static spinlock_t pmu_backlight_lock; +static int sleeping; static int pmu_backlight_get_level_brightness(struct fb_info *info, int level) @@ -40,23 +41,36 @@ static int pmu_backlight_update_status(struct backlight_device *bd) { struct fb_info *info = class_get_devdata(&bd->class_dev); struct adb_request req; - int pmulevel, level = bd->props->brightness; + unsigned long flags; + int level = bd->props->brightness; - if (vias == NULL) - return -ENODEV; + spin_lock_irqsave(&pmu_backlight_lock, flags); + + /* Don't update brightness when sleeping */ + if (sleeping) + goto out; if (bd->props->power != FB_BLANK_UNBLANK || bd->props->fb_blank != FB_BLANK_UNBLANK) level = 0; - pmulevel = pmu_backlight_get_level_brightness(info, level); + if (level > 0) { + int pmulevel = pmu_backlight_get_level_brightness(info, level); - pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel); - pmu_wait_complete(&req); + pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel); + pmu_wait_complete(&req); - pmu_request(&req, NULL, 2, PMU_POWER_CTRL, - PMU_POW_BACKLIGHT | (level > 0 ? PMU_POW_ON : PMU_POW_OFF)); - pmu_wait_complete(&req); + pmu_request(&req, NULL, 2, PMU_POWER_CTRL, + PMU_POW_BACKLIGHT | PMU_POW_ON); + pmu_wait_complete(&req); + } else { + pmu_request(&req, NULL, 2, PMU_POWER_CTRL, + PMU_POW_BACKLIGHT | PMU_POW_OFF); + pmu_wait_complete(&req); + } + +out: + spin_unlock_irqrestore(&pmu_backlight_lock, flags); return 0; } @@ -73,15 +87,39 @@ static struct backlight_properties pmu_backlight_data = { .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; -void __init pmu_backlight_init(struct device_node *in_vias) +#ifdef CONFIG_PM +static int pmu_backlight_sleep_call(struct pmu_sleep_notifier *self, int when) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_backlight_lock, flags); + + switch (when) { + case PBOOK_SLEEP_REQUEST: + sleeping = 1; + break; + case PBOOK_WAKE: + sleeping = 0; + break; + } + + spin_unlock_irqrestore(&pmu_backlight_lock, flags); + + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier pmu_backlight_sleep_notif = { + .notifier_call = pmu_backlight_sleep_call, +}; +#endif + +void __init pmu_backlight_init() { struct backlight_device *bd; struct fb_info *info; char name[10]; int level, autosave; - vias = in_vias; - /* Special case for the old PowerBook since I can't test on it */ autosave = machine_is_compatible("AAPL,3400/2400") || @@ -141,6 +179,10 @@ void __init pmu_backlight_init(struct device_node *in_vias) pmac_backlight = bd; mutex_unlock(&pmac_backlight_mutex); +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&pmu_backlight_sleep_notif); +#endif + printk("pmubl: Backlight initialized (%s)\n", name); return; diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index af8375e..5189d54 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -74,7 +74,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, static struct led_classdev pmu_led = { .name = "pmu-front-led", -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK +#ifdef CONFIG_ADB_PMU_LED_IDE .default_trigger = "ide-disk", #endif .brightness_set = pmu_led_set, diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 06ca80b..ea38680 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -16,7 +16,6 @@ * a sleep or a freq. switch * - Move sleep code out of here to pmac_pm, merge into new * common PM infrastructure - * - Move backlight code out as well * - Save/Restore PCI space properly * */ @@ -60,9 +59,7 @@ #include <asm/mmu_context.h> #include <asm/cputable.h> #include <asm/time.h> -#ifdef CONFIG_PMAC_BACKLIGHT #include <asm/backlight.h> -#endif #include "via-pmu-event.h" @@ -177,10 +174,6 @@ static int query_batt_timer = BATTERY_POLLING_COUNT; static struct adb_request batt_req; static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES]; -#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) -extern int disable_kernel_backlight; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ - int __fake_sleep; int asleep; BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); @@ -466,7 +459,7 @@ static int __init via_pmu_dev_init(void) #ifdef CONFIG_PMAC_BACKLIGHT /* Initialize backlight */ - pmu_backlight_init(vias); + pmu_backlight_init(); #endif #ifdef CONFIG_PPC32 @@ -1403,11 +1396,8 @@ next: else if ((1 << pirq) & PMU_INT_SNDBRT) { #ifdef CONFIG_PMAC_BACKLIGHT if (len == 3) -#ifdef CONFIG_INPUT_ADBHID - if (!disable_kernel_backlight) -#endif /* CONFIG_INPUT_ADBHID */ - pmac_backlight_set_legacy_brightness(data[1] >> 4); -#endif /* CONFIG_PMAC_BACKLIGHT */ + pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4); +#endif } /* Tick interrupt */ else if ((1 << pirq) & PMU_INT_TICK) { @@ -2414,7 +2404,7 @@ struct pmu_private { spinlock_t lock; #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) int backlight_locker; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ +#endif }; static LIST_HEAD(all_pmu_pvt); @@ -2464,7 +2454,7 @@ pmu_open(struct inode *inode, struct file *file) spin_lock_irqsave(&all_pvt_lock, flags); #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) pp->backlight_locker = 0; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ +#endif list_add(&pp->list, &all_pmu_pvt); spin_unlock_irqrestore(&all_pvt_lock, flags); file->private_data = pp; @@ -2559,13 +2549,12 @@ pmu_release(struct inode *inode, struct file *file) spin_lock_irqsave(&all_pvt_lock, flags); list_del(&pp->list); spin_unlock_irqrestore(&all_pvt_lock, flags); + #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) - if (pp->backlight_locker) { - spin_lock_irqsave(&pmu_lock, flags); - disable_kernel_backlight--; - spin_unlock_irqrestore(&pmu_lock, flags); - } -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ + if (pp->backlight_locker) + pmac_backlight_enable(); +#endif + kfree(pp); } unlock_kernel(); @@ -2642,18 +2631,18 @@ pmu_ioctl(struct inode * inode, struct file *filp, #ifdef CONFIG_INPUT_ADBHID case PMU_IOC_GRAB_BACKLIGHT: { struct pmu_private *pp = filp->private_data; - unsigned long flags; if (pp->backlight_locker) return 0; + pp->backlight_locker = 1; - spin_lock_irqsave(&pmu_lock, flags); - disable_kernel_backlight++; - spin_unlock_irqrestore(&pmu_lock, flags); + pmac_backlight_disable(); + return 0; } #endif /* CONFIG_INPUT_ADBHID */ #endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */ + case PMU_IOC_GET_MODEL: return put_user(pmu_kind, argp); case PMU_IOC_HAS_ADB: diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 59ac35d..57b34cd 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -526,7 +526,9 @@ static int dvb_frontend_thread(void *data) fepriv->delay = 3*HZ; fepriv->status = 0; fepriv->wakeup = 0; - fepriv->reinitialise = 1; + fepriv->reinitialise = 0; + + dvb_frontend_init(fe); while (1) { up(&fepriv->sem); /* is locked when we enter the thread... */ @@ -1013,17 +1015,18 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) return ret; if ((file->f_flags & O_ACCMODE) != O_RDONLY) { + + /* normal tune mode when opened R/W */ + fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT; + fepriv->tone = -1; + fepriv->voltage = -1; + ret = dvb_frontend_start (fe); if (ret) dvb_generic_release (inode, file); /* empty event queue */ fepriv->events.eventr = fepriv->events.eventw = 0; - - /* normal tune mode when opened R/W */ - fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT; - fepriv->tone = -1; - fepriv->voltage = -1; } return ret; diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index a189683..2be33f2 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -194,11 +194,11 @@ struct dvb_pll_desc dvb_pll_tda665x = { { 253834000, 36249333, 166667, 0xca, 0x62 /* 011 0 0 0 10 */ }, { 383834000, 36249333, 166667, 0xca, 0xa2 /* 101 0 0 0 10 */ }, { 443834000, 36249333, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ }, - { 444000000, 36249333, 166667, 0xca, 0xc3 /* 110 0 0 0 11 */ }, - { 583834000, 36249333, 166667, 0xca, 0x63 /* 011 0 0 0 11 */ }, - { 793834000, 36249333, 166667, 0xca, 0xa3 /* 101 0 0 0 11 */ }, - { 444834000, 36249333, 166667, 0xca, 0xc3 /* 110 0 0 0 11 */ }, - { 861000000, 36249333, 166667, 0xca, 0xe3 /* 111 0 0 0 11 */ }, + { 444000000, 36249333, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ }, + { 583834000, 36249333, 166667, 0xca, 0x64 /* 011 0 0 1 00 */ }, + { 793834000, 36249333, 166667, 0xca, 0xa4 /* 101 0 0 1 00 */ }, + { 444834000, 36249333, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ }, + { 861000000, 36249333, 166667, 0xca, 0xe4 /* 111 0 0 1 00 */ }, } }; EXPORT_SYMBOL(dvb_pll_tda665x); @@ -613,7 +613,21 @@ static struct dvb_tuner_ops dvb_pll_tuner_ops = { int dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struct i2c_adapter *i2c, struct dvb_pll_desc *desc) { + u8 b1 [] = { 0 }; + struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, .buf = b1, .len = 1 }; struct dvb_pll_priv *priv = NULL; + int ret; + + if (i2c != NULL) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + ret = i2c_transfer (i2c, &msg, 1); + if (ret != 1) + return -1; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } priv = kzalloc(sizeof(struct dvb_pll_priv), GFP_KERNEL); if (priv == NULL) diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 500f15c..4506165 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -2203,8 +2203,8 @@ static int frontend_init(struct av7110 *av7110) av7110->fe->ops.tuner_ops.set_params = nexusca_stv0297_tuner_set_params; /* set TDA9819 into DVB mode */ - saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD) - saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9198 pin30(VIF) + saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD) + saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF) /* tuner on this needs a slower i2c bus speed */ av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index 6405546..6ffe53f 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -272,8 +272,8 @@ static int av7110_dvb_c_switch(struct saa7146_fh *fh) if (ves1820_writereg(dev, 0x09, 0x0f, 0x60)) dprintk(1, "setting band in demodulator failed.\n"); } else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) { - saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // TDA9198 pin9(STD) - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); // TDA9198 pin30(VIF) + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // TDA9819 pin9(STD) + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); // TDA9819 pin30(VIF) } if (i2c_writereg(av7110, 0x48, 0x02, 0xd0) != 1) dprintk(1, "saa7113 write failed @ card %d", av7110->dvb_adapter.num); @@ -308,8 +308,8 @@ static int av7110_dvb_c_switch(struct saa7146_fh *fh) if (ves1820_writereg(dev, 0x09, 0x0f, 0x20)) dprintk(1, "setting band in demodulator failed.\n"); } else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) { - saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD) - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // TDA9198 pin30(VIF) + saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD) + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF) } } @@ -750,8 +750,8 @@ int av7110_init_analog_module(struct av7110 *av7110) if (ves1820_writereg(av7110->dev, 0x09, 0x0f, 0x20)) dprintk(1, "setting band in demodulator failed.\n"); } else if (av7110->analog_tuner_flags & ANALOG_TUNER_STV0297) { - saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD) - saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9198 pin30(VIF) + saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9819 pin9(STD) + saa7146_setgpio(av7110->dev, 3, SAA7146_GPIO_OUTLO); // TDA9819 pin30(VIF) } /* init the saa7113 */ diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 5f111d4..2d21fec 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -1303,6 +1303,9 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio budget_av->budget.dvb_adapter.priv = budget_av; frontend_init(budget_av); ciintf_init(budget_av); + + ttpci_budget_init_hooks(&budget_av->budget); + return 0; } diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 4b966ee..ffbbb3e 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -1101,6 +1101,8 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio budget_ci->budget.dvb_adapter.priv = budget_ci; frontend_init(budget_ci); + ttpci_budget_init_hooks(&budget_ci->budget); + return 0; } diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index e4cf777..e15562f 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -63,9 +63,6 @@ static int stop_ts_capture(struct budget *budget) { dprintk(2, "budget: %p\n", budget); - if (--budget->feeding) - return budget->feeding; - saa7146_write(budget->dev, MC1, MASK_20); // DMA3 off SAA7146_IER_DISABLE(budget->dev, MASK_10); return 0; @@ -77,8 +74,8 @@ static int start_ts_capture(struct budget *budget) dprintk(2, "budget: %p\n", budget); - if (budget->feeding) - return ++budget->feeding; + if (!budget->feeding || !budget->fe_synced) + return 0; saa7146_write(dev, MC1, MASK_20); // DMA3 off @@ -139,7 +136,33 @@ static int start_ts_capture(struct budget *budget) SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ saa7146_write(dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ - return ++budget->feeding; + return 0; +} + +static int budget_read_fe_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct budget *budget = (struct budget *) fe->dvb->priv; + int synced; + int ret; + + if (budget->read_fe_status) + ret = budget->read_fe_status(fe, status); + else + ret = -EINVAL; + + if (!ret) { + synced = (*status & FE_HAS_LOCK); + if (synced != budget->fe_synced) { + budget->fe_synced = synced; + spin_lock(&budget->feedlock); + if (synced) + start_ts_capture(budget); + else + stop_ts_capture(budget); + spin_unlock(&budget->feedlock); + } + } + return ret; } static void vpeirq(unsigned long data) @@ -267,7 +290,7 @@ static int budget_start_feed(struct dvb_demux_feed *feed) { struct dvb_demux *demux = feed->demux; struct budget *budget = (struct budget *) demux->priv; - int status; + int status = 0; dprintk(2, "budget: %p\n", budget); @@ -276,7 +299,8 @@ static int budget_start_feed(struct dvb_demux_feed *feed) spin_lock(&budget->feedlock); feed->pusi_seen = 0; /* have a clean section start */ - status = start_ts_capture(budget); + if (budget->feeding++ == 0) + status = start_ts_capture(budget); spin_unlock(&budget->feedlock); return status; } @@ -285,12 +309,13 @@ static int budget_stop_feed(struct dvb_demux_feed *feed) { struct dvb_demux *demux = feed->demux; struct budget *budget = (struct budget *) demux->priv; - int status; + int status = 0; dprintk(2, "budget: %p\n", budget); spin_lock(&budget->feedlock); - status = stop_ts_capture(budget); + if (--budget->feeding == 0) + status = stop_ts_capture(budget); spin_unlock(&budget->feedlock); return status; } @@ -470,6 +495,14 @@ err: return ret; } +void ttpci_budget_init_hooks(struct budget *budget) +{ + if (budget->dvb_frontend && !budget->read_fe_status) { + budget->read_fe_status = budget->dvb_frontend->ops.read_status; + budget->dvb_frontend->ops.read_status = budget_read_fe_status; + } +} + int ttpci_budget_deinit(struct budget *budget) { struct saa7146_dev *dev = budget->dev; @@ -508,11 +541,8 @@ void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port) spin_lock(&budget->feedlock); budget->video_port = video_port; if (budget->feeding) { - int oldfeeding = budget->feeding; - budget->feeding = 1; stop_ts_capture(budget); start_ts_capture(budget); - budget->feeding = oldfeeding; } spin_unlock(&budget->feedlock); } @@ -520,6 +550,7 @@ void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port) EXPORT_SYMBOL_GPL(ttpci_budget_debiread); EXPORT_SYMBOL_GPL(ttpci_budget_debiwrite); EXPORT_SYMBOL_GPL(ttpci_budget_init); +EXPORT_SYMBOL_GPL(ttpci_budget_init_hooks); EXPORT_SYMBOL_GPL(ttpci_budget_deinit); EXPORT_SYMBOL_GPL(ttpci_budget_irq10_handler); EXPORT_SYMBOL_GPL(ttpci_budget_set_video_port); diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index ee60ce9..5722744 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -617,6 +617,8 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte budget->dvb_adapter.priv = budget; frontend_init(budget); + ttpci_budget_init_hooks(budget); + return 0; } diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 35761f1..863dffb 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -375,9 +375,6 @@ static void frontend_init(struct budget *budget) if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; budget->dvb_frontend->tuner_priv = &budget->i2c_adap; - budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; - budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; - budget->dvb_frontend->ops.set_tone = budget_set_tone; break; } break; @@ -474,6 +471,8 @@ static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_ budget->dvb_adapter.priv = budget; frontend_init(budget); + ttpci_budget_init_hooks(budget); + return 0; } diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h index ecea3a1..e8a5c79 100644 --- a/drivers/media/dvb/ttpci/budget.h +++ b/drivers/media/dvb/ttpci/budget.h @@ -52,9 +52,6 @@ struct budget { struct dmx_frontend hw_frontend; struct dmx_frontend mem_frontend; - int fe_synced; - struct mutex pid_mutex; - int ci_present; int video_port; @@ -74,6 +71,9 @@ struct budget { struct dvb_adapter dvb_adapter; struct dvb_frontend *dvb_frontend; + int (*read_fe_status)(struct dvb_frontend *fe, fe_status_t *status); + int fe_synced; + void *priv; }; @@ -106,6 +106,7 @@ static struct saa7146_pci_extension_data x_var = { \ extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, struct saa7146_pci_extension_data *info, struct module *owner); +extern void ttpci_budget_init_hooks(struct budget *budget); extern int ttpci_budget_deinit(struct budget *budget); extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr); extern void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port); diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 6d532f1..fe56862 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -145,7 +145,7 @@ config VIDEO_SAA5246A config VIDEO_SAA5249 tristate "SAA5249 Teletext processor" - depends on VIDEO_DEV && I2C + depends on VIDEO_DEV && I2C && VIDEO_V4L1 help Support for I2C bus based teletext using the SAA5249 chip. At the moment this is only useful on some European WinTV cards. @@ -155,7 +155,7 @@ config VIDEO_SAA5249 config TUNER_3036 tristate "SAB3036 tuner" - depends on VIDEO_DEV && I2C + depends on VIDEO_DEV && I2C && VIDEO_V4L1 help Say Y here to include support for Philips SAB3036 compatible tuners. If in doubt, say N. diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig index 153f6a4..cdcf556 100644 --- a/drivers/media/video/bt8xx/Kconfig +++ b/drivers/media/video/bt8xx/Kconfig @@ -1,6 +1,6 @@ config VIDEO_BT848 tristate "BT848 Video For Linux" - depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 + depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L1 select I2C_ALGOBIT select FW_LOADER select VIDEO_BTCX diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 5764a89..20dff7c 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3923,7 +3923,12 @@ static int __devinit bttv_register_video(struct bttv *btv) goto err; printk(KERN_INFO "bttv%d: registered device video%d\n", btv->c.nr,btv->video_dev->minor & 0x1f); - video_device_create_file(btv->video_dev, &class_device_attr_card); + if (class_device_create_file(&btv->video_dev->class_dev, + &class_device_attr_card)<0) { + printk(KERN_ERR "bttv%d: class_device_create_file 'card' " + "failed\n", btv->c.nr); + goto err; + } /* vbi */ btv->vbi_dev = vdev_init(btv, &bttv_vbi_template, "vbi"); @@ -4287,6 +4292,8 @@ static struct pci_driver bttv_pci_driver = { static int bttv_init_module(void) { + int ret; + bttv_num = 0; printk(KERN_INFO "bttv: driver version %d.%d.%d loaded\n", @@ -4308,7 +4315,11 @@ static int bttv_init_module(void) bttv_check_chipset(); - bus_register(&bttv_sub_bus_type); + ret = bus_register(&bttv_sub_bus_type); + if (ret < 0) { + printk(KERN_WARNING "bttv: bus_register error: %d\n", ret); + return ret; + } return pci_register_driver(&bttv_pci_driver); } diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c index 8c9f0f7..63676e7 100644 --- a/drivers/media/video/bt8xx/bttv-vbi.c +++ b/drivers/media/video/bt8xx/bttv-vbi.c @@ -31,11 +31,16 @@ #include <asm/io.h> #include "bttvp.h" -/* Offset from line sync pulse leading edge (0H) in 1 / sampling_rate: - bt8x8 /HRESET pulse starts at 0H and has length 64 / fCLKx1 (E|O_VTC - HSFMT = 0). VBI_HDELAY (always 0) is an offset from the trailing edge - of /HRESET in 1 / fCLKx1, and the sampling_rate tvnorm->Fsc is fCLKx2. */ -#define VBI_OFFSET ((64 + 0) * 2) +/* Offset from line sync pulse leading edge (0H) to start of VBI capture, + in fCLKx2 pixels. According to the datasheet, VBI capture starts + VBI_HDELAY fCLKx1 pixels from the tailing edgeof /HRESET, and /HRESET + is 64 fCLKx1 pixels wide. VBI_HDELAY is set to 0, so this should be + (64 + 0) * 2 = 128 fCLKx2 pixels. But it's not! The datasheet is + Just Plain Wrong. The real value appears to be different for + different revisions of the bt8x8 chips, and to be affected by the + horizontal scaling factor. Experimentally, the value is measured + to be about 244. */ +#define VBI_OFFSET 244 #define VBI_DEFLINES 16 #define VBI_MAXLINES 32 diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index 353d02b..9dddff4 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -490,6 +490,23 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user return 0; } +struct video_code32 +{ + char loadwhat[16]; /* name or tag of file being passed */ + compat_int_t datasize; + unsigned char *data; +}; + +static inline int microcode32(struct video_code *kp, struct video_code32 __user *up) +{ + if(!access_ok(VERIFY_READ, up, sizeof(struct video_code32)) || + copy_from_user(kp->loadwhat, up->loadwhat, sizeof (up->loadwhat)) || + get_user(kp->datasize, &up->datasize) || + copy_from_user(kp->data, up->data, up->datasize)) + return -EFAULT; + return 0; +} + #define VIDIOCGTUNER32 _IOWR('v',4, struct video_tuner32) #define VIDIOCSTUNER32 _IOW('v',5, struct video_tuner32) #define VIDIOCGWIN32 _IOR('v',9, struct video_window32) @@ -498,6 +515,7 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user #define VIDIOCSFBUF32 _IOW('v',12, struct video_buffer32) #define VIDIOCGFREQ32 _IOR('v',14, u32) #define VIDIOCSFREQ32 _IOW('v',15, u32) +#define VIDIOCSMICROCODE32 _IOW('v',27, struct video_code32) /* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */ #define VIDIOC_ENUMINPUT32 VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4) @@ -590,6 +608,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg struct video_tuner vt; struct video_buffer vb; struct video_window vw; + struct video_code vc; struct v4l2_format v2f; struct v4l2_buffer v2b; struct v4l2_framebuffer v2fb; @@ -628,6 +647,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break; case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break; case VIDIOC_TRY_FMT32: cmd = VIDIOC_TRY_FMT; break; + case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break; }; switch(cmd) { @@ -703,6 +723,10 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOC_G_FBUF: case VIDIOC_G_INPUT: compatible_arg = 0; + case VIDIOCSMICROCODE: + err = microcode32(&karg.vc, up); + compatible_arg = 0; + break; }; if(err) diff --git a/drivers/media/video/cpia2/Kconfig b/drivers/media/video/cpia2/Kconfig index 513cc09..e39a961 100644 --- a/drivers/media/video/cpia2/Kconfig +++ b/drivers/media/video/cpia2/Kconfig @@ -1,6 +1,6 @@ config VIDEO_CPIA2 tristate "CPiA2 Video For Linux" - depends on VIDEO_DEV && USB + depends on VIDEO_DEV && USB && VIDEO_V4L1 ---help--- This is the video4linux driver for cameras based on Vision's CPiA2 (Colour Processor Interface ASIC), such as the Digital Blue QX5 diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 72b630a..c255646 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -89,7 +89,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) auxgpio = cx_read(MO_GP1_IO); /* Take out the parity part */ - gpio+=(gpio & 0x7fd) + (auxgpio & 0xef); + gpio=(gpio & 0x7fd) + (auxgpio & 0xef); } else auxgpio = gpio; diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 2225d4b..547cdbd 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1180,7 +1180,6 @@ static int video_do_ioctl(struct inode *inode, struct file *file, V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_VBI_CAPTURE | - V4L2_CAP_VIDEO_OVERLAY | 0; if (UNSET != core->tuner_type) cap->capabilities |= V4L2_CAP_TUNER; @@ -1226,7 +1225,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return cx8800_try_fmt(dev,fh,f); } -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { @@ -1585,7 +1584,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, *id = 0; return 0; } -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT case VIDIOCSTUNER: { struct video_tuner *v = arg; diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index dbb75a7..56246b8 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -362,7 +362,7 @@ int msp_sleep(struct msp_state *state, int timeout) } /* ------------------------------------------------------------------------ */ - +#ifdef CONFIG_VIDEO_V4L1 static int msp_mode_v4l2_to_v4l1(int rxsubchans, int audmode) { if (rxsubchans == V4L2_TUNER_SUB_MONO) @@ -384,6 +384,7 @@ static int msp_mode_v4l1_to_v4l2(int mode) return V4L2_TUNER_MODE_LANG1; return V4L2_TUNER_MODE_MONO; } +#endif static int msp_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) { @@ -509,6 +510,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) /* --- v4l ioctls --- */ /* take care: bttv does userspace copying, we'll get a kernel pointer here... */ +#ifdef CONFIG_VIDEO_V4L1 case VIDIOCGAUDIO: { struct video_audio *va = arg; @@ -577,6 +579,12 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) } case VIDIOCSFREQ: + { + /* new channel -- kick audio carrier scan */ + msp_wake_thread(client); + break; + } +#endif case VIDIOC_S_FREQUENCY: { /* new channel -- kick audio carrier scan */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 9b48abc..be1e5cc 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -852,7 +852,6 @@ unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw) return hdw->serial_number; } - int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw) { return hdw->unit_number; @@ -2318,7 +2317,6 @@ void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *hdw) } } - /* Return name for this driver instance */ const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) { @@ -2542,6 +2540,10 @@ static void pvr2_ctl_timeout(unsigned long data) } +/* Issue a command and get a response from the device. This extended + version includes a probe flag (which if set means that device errors + should not be logged or treated as fatal) and a timeout in jiffies. + This can be used to non-lethally probe the health of endpoint 1. */ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, unsigned int timeout,int probe_fl, void *write_data,unsigned int write_len, @@ -2970,6 +2972,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) } +/* Stop / start video stream transport */ static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl) { int status; @@ -3068,6 +3071,7 @@ int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val) } +/* Find I2C address of eeprom */ static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw) { int result; diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c index 681f79c..1e39376 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.c +++ b/drivers/media/video/pvrusb2/pvrusb2-io.c @@ -26,6 +26,8 @@ #include <linux/slab.h> #include <linux/mutex.h> +static const char *pvr2_buffer_state_decode(enum pvr2_buffer_state); + #define BUFFER_SIG 0x47653271 // #define SANITY_CHECK_BUFFERS @@ -515,6 +517,10 @@ void pvr2_stream_set_callback(struct pvr2_stream *sp, } /* Query / set the nominal buffer count */ +int pvr2_stream_get_buffer_count(struct pvr2_stream *sp) +{ + return sp->buffer_target_count; +} int pvr2_stream_set_buffer_count(struct pvr2_stream *sp,unsigned int cnt) { @@ -553,7 +559,6 @@ int pvr2_stream_get_ready_count(struct pvr2_stream *sp) return sp->r_count; } - void pvr2_stream_kill(struct pvr2_stream *sp) { struct pvr2_buffer *bp; @@ -607,7 +612,6 @@ int pvr2_buffer_queue(struct pvr2_buffer *bp) return ret; } - int pvr2_buffer_set_buffer(struct pvr2_buffer *bp,void *ptr,unsigned int cnt) { int ret = 0; @@ -646,7 +650,6 @@ int pvr2_buffer_get_status(struct pvr2_buffer *bp) return bp->status; } - int pvr2_buffer_get_id(struct pvr2_buffer *bp) { return bp->id; diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.h b/drivers/media/video/pvrusb2/pvrusb2-io.h index 96285ad..93279cc 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.h +++ b/drivers/media/video/pvrusb2/pvrusb2-io.h @@ -47,6 +47,7 @@ void pvr2_stream_set_callback(struct pvr2_stream *, void *data); /* Query / set the nominal buffer count */ +int pvr2_stream_get_buffer_count(struct pvr2_stream *); int pvr2_stream_set_buffer_count(struct pvr2_stream *,unsigned int); /* Get a pointer to a buffer that is either idle, ready, or is specified @@ -58,6 +59,7 @@ struct pvr2_buffer *pvr2_stream_get_buffer(struct pvr2_stream *sp,int id); /* Find out how many buffers are idle or ready */ int pvr2_stream_get_ready_count(struct pvr2_stream *); + /* Kill all pending buffers and throw away any ready buffers as well */ void pvr2_stream_kill(struct pvr2_stream *); diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c index f7a2e22..b71f9a9 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c @@ -213,7 +213,9 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp) " pvr2_ioread_setup (tear-down) id=%p",cp); pvr2_ioread_stop(cp); pvr2_stream_kill(cp->stream); - pvr2_stream_set_buffer_count(cp->stream,0); + if (pvr2_stream_get_buffer_count(cp->stream)) { + pvr2_stream_set_buffer_count(cp->stream,0); + } cp->stream = NULL; } if (sp) { @@ -251,7 +253,6 @@ int pvr2_ioread_set_enabled(struct pvr2_ioread *cp,int fl) return ret; } - static int pvr2_ioread_get_buffer(struct pvr2_ioread *cp) { int stat; diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 6af55a8..d1dda5c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -44,12 +44,16 @@ struct pvr2_sysfs { struct kobj_type ktype; struct class_device_attribute attr_v4l_minor_number; struct class_device_attribute attr_unit_number; + int v4l_minor_number_created_ok; + int unit_number_created_ok; }; #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC struct pvr2_sysfs_debugifc { struct class_device_attribute attr_debugcmd; struct class_device_attribute attr_debuginfo; + int debugcmd_created_ok; + int debuginfo_created_ok; }; #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */ @@ -67,6 +71,7 @@ struct pvr2_sysfs_ctl_item { struct pvr2_sysfs_ctl_item *item_next; struct attribute *attr_gen[7]; struct attribute_group grp; + int created_ok; char name[80]; }; @@ -487,6 +492,7 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) struct pvr2_sysfs_func_set *fp; struct pvr2_ctrl *cptr; unsigned int cnt,acnt; + int ret; if ((ctl_id < 0) || (ctl_id >= (sizeof(funcs)/sizeof(funcs[0])))) { return; @@ -589,7 +595,13 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) cip->grp.name = cip->name; cip->grp.attrs = cip->attr_gen; - sysfs_create_group(&sfp->class_dev->kobj,&cip->grp); + ret = sysfs_create_group(&sfp->class_dev->kobj,&cip->grp); + if (ret) { + printk(KERN_WARNING "%s: sysfs_create_group error: %d\n", + __FUNCTION__, ret); + return; + } + cip->created_ok = !0; } #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC @@ -600,6 +612,8 @@ static ssize_t debugcmd_store(struct class_device *,const char *,size_t count); static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp) { struct pvr2_sysfs_debugifc *dip; + int ret; + dip = kmalloc(sizeof(*dip),GFP_KERNEL); if (!dip) return; memset(dip,0,sizeof(*dip)); @@ -613,17 +627,34 @@ static void pvr2_sysfs_add_debugifc(struct pvr2_sysfs *sfp) dip->attr_debuginfo.attr.mode = S_IRUGO; dip->attr_debuginfo.show = debuginfo_show; sfp->debugifc = dip; - class_device_create_file(sfp->class_dev,&dip->attr_debugcmd); - class_device_create_file(sfp->class_dev,&dip->attr_debuginfo); + ret = class_device_create_file(sfp->class_dev,&dip->attr_debugcmd); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + dip->debugcmd_created_ok = !0; + } + ret = class_device_create_file(sfp->class_dev,&dip->attr_debuginfo); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + dip->debuginfo_created_ok = !0; + } } static void pvr2_sysfs_tear_down_debugifc(struct pvr2_sysfs *sfp) { if (!sfp->debugifc) return; - class_device_remove_file(sfp->class_dev, - &sfp->debugifc->attr_debuginfo); - class_device_remove_file(sfp->class_dev,&sfp->debugifc->attr_debugcmd); + if (sfp->debugifc->debuginfo_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->debugifc->attr_debuginfo); + } + if (sfp->debugifc->debugcmd_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->debugifc->attr_debugcmd); + } kfree(sfp->debugifc); sfp->debugifc = NULL; } @@ -645,7 +676,9 @@ static void pvr2_sysfs_tear_down_controls(struct pvr2_sysfs *sfp) struct pvr2_sysfs_ctl_item *cip1,*cip2; for (cip1 = sfp->item_first; cip1; cip1 = cip2) { cip2 = cip1->item_next; - sysfs_remove_group(&sfp->class_dev->kobj,&cip1->grp); + if (cip1->created_ok) { + sysfs_remove_group(&sfp->class_dev->kobj,&cip1->grp); + } pvr2_sysfs_trace("Destroying pvr2_sysfs_ctl_item id=%p",cip1); kfree(cip1); } @@ -675,8 +708,14 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp) pvr2_sysfs_tear_down_debugifc(sfp); #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */ pvr2_sysfs_tear_down_controls(sfp); - class_device_remove_file(sfp->class_dev,&sfp->attr_v4l_minor_number); - class_device_remove_file(sfp->class_dev,&sfp->attr_unit_number); + if (sfp->v4l_minor_number_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->attr_v4l_minor_number); + } + if (sfp->unit_number_created_ok) { + class_device_remove_file(sfp->class_dev, + &sfp->attr_unit_number); + } pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev); sfp->class_dev->class_data = NULL; class_device_unregister(sfp->class_dev); @@ -709,6 +748,8 @@ static void class_dev_create(struct pvr2_sysfs *sfp, { struct usb_device *usb_dev; struct class_device *class_dev; + int ret; + usb_dev = pvr2_hdw_get_dev(sfp->channel.hdw); if (!usb_dev) return; class_dev = kmalloc(sizeof(*class_dev),GFP_KERNEL); @@ -733,20 +774,40 @@ static void class_dev_create(struct pvr2_sysfs *sfp, sfp->class_dev = class_dev; class_dev->class_data = sfp; - class_device_register(class_dev); + ret = class_device_register(class_dev); + if (ret) { + printk(KERN_ERR "%s: class_device_register failed\n", + __FUNCTION__); + kfree(class_dev); + return; + } sfp->attr_v4l_minor_number.attr.owner = THIS_MODULE; sfp->attr_v4l_minor_number.attr.name = "v4l_minor_number"; sfp->attr_v4l_minor_number.attr.mode = S_IRUGO; sfp->attr_v4l_minor_number.show = v4l_minor_number_show; sfp->attr_v4l_minor_number.store = NULL; - class_device_create_file(sfp->class_dev,&sfp->attr_v4l_minor_number); + ret = class_device_create_file(sfp->class_dev, + &sfp->attr_v4l_minor_number); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + sfp->v4l_minor_number_created_ok = !0; + } + sfp->attr_unit_number.attr.owner = THIS_MODULE; sfp->attr_unit_number.attr.name = "unit_number"; sfp->attr_unit_number.attr.mode = S_IRUGO; sfp->attr_unit_number.show = unit_number_show; sfp->attr_unit_number.store = NULL; - class_device_create_file(sfp->class_dev,&sfp->attr_unit_number); + ret = class_device_create_file(sfp->class_dev,&sfp->attr_unit_number); + if (ret < 0) { + printk(KERN_WARNING "%s: class_device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + sfp->unit_number_created_ok = !0; + } pvr2_sysfs_add_controls(sfp); #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index f1fd69e..d73cff1 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -997,9 +997,9 @@ static int saa7134_alsa_init(void) struct saa7134_dev *dev = NULL; struct list_head *list; - if (!dmasound_init && !dmasound_exit) { - dmasound_init = alsa_device_init; - dmasound_exit = alsa_device_exit; + if (!saa7134_dmasound_init && !saa7134_dmasound_exit) { + saa7134_dmasound_init = alsa_device_init; + saa7134_dmasound_exit = alsa_device_exit; } else { printk(KERN_WARNING "saa7134 ALSA: can't load, DMA sound handler already assigned (probably to OSS)\n"); return -EBUSY; @@ -1036,8 +1036,8 @@ static void saa7134_alsa_exit(void) snd_card_free(snd_saa7134_cards[idx]); } - dmasound_init = NULL; - dmasound_exit = NULL; + saa7134_dmasound_init = NULL; + saa7134_dmasound_exit = NULL; printk(KERN_INFO "saa7134 ALSA driver for DMA sound unloaded\n"); return; diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 6e97cc8..be3a81f 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -95,8 +95,8 @@ LIST_HEAD(saa7134_devlist); static LIST_HEAD(mops_list); static unsigned int saa7134_devcount; -int (*dmasound_init)(struct saa7134_dev *dev); -int (*dmasound_exit)(struct saa7134_dev *dev); +int (*saa7134_dmasound_init)(struct saa7134_dev *dev); +int (*saa7134_dmasound_exit)(struct saa7134_dev *dev); #define dprintk(fmt, arg...) if (core_debug) \ printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg) @@ -1008,8 +1008,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, /* check for signal */ saa7134_irq_video_intl(dev); - if (dmasound_init && !dev->dmasound.priv_data) { - dmasound_init(dev); + if (saa7134_dmasound_init && !dev->dmasound.priv_data) { + saa7134_dmasound_init(dev); } return 0; @@ -1036,8 +1036,8 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev) struct saa7134_mpeg_ops *mops; /* Release DMA sound modules if present */ - if (dmasound_exit && dev->dmasound.priv_data) { - dmasound_exit(dev); + if (saa7134_dmasound_exit && dev->dmasound.priv_data) { + saa7134_dmasound_exit(dev); } /* debugging ... */ @@ -1169,8 +1169,8 @@ EXPORT_SYMBOL(saa7134_boards); /* ----------------- for the DMA sound modules --------------- */ -EXPORT_SYMBOL(dmasound_init); -EXPORT_SYMBOL(dmasound_exit); +EXPORT_SYMBOL(saa7134_dmasound_init); +EXPORT_SYMBOL(saa7134_dmasound_exit); EXPORT_SYMBOL(saa7134_pgtable_free); EXPORT_SYMBOL(saa7134_pgtable_build); EXPORT_SYMBOL(saa7134_pgtable_alloc); diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c index 3895d05..2e3ba5f 100644 --- a/drivers/media/video/saa7134/saa7134-oss.c +++ b/drivers/media/video/saa7134/saa7134-oss.c @@ -993,9 +993,9 @@ static int saa7134_oss_init(void) struct saa7134_dev *dev = NULL; struct list_head *list; - if (!dmasound_init && !dmasound_exit) { - dmasound_init = oss_device_init; - dmasound_exit = oss_device_exit; + if (!saa7134_dmasound_init && !saa7134_dmasound_exit) { + saa7134_dmasound_init = oss_device_init; + saa7134_dmasound_exit = oss_device_exit; } else { printk(KERN_WARNING "saa7134 OSS: can't load, DMA sound handler already assigned (probably to ALSA)\n"); return -EBUSY; @@ -1037,8 +1037,8 @@ static void saa7134_oss_exit(void) } - dmasound_init = NULL; - dmasound_exit = NULL; + saa7134_dmasound_init = NULL; + saa7134_dmasound_exit = NULL; printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n"); diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index e4156ec..8656f24 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -40,7 +40,7 @@ static unsigned int video_debug = 0; static unsigned int gbuffers = 8; -static unsigned int noninterlaced = 0; +static unsigned int noninterlaced = 1; static unsigned int gbufsize = 720*576*4; static unsigned int gbufsize_max = 720*576*4; module_param(video_debug, int, 0644); @@ -48,7 +48,7 @@ MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); module_param(gbuffers, int, 0444); MODULE_PARM_DESC(gbuffers,"number of capture buffers, range 2-32"); module_param(noninterlaced, int, 0644); -MODULE_PARM_DESC(noninterlaced,"video input is noninterlaced"); +MODULE_PARM_DESC(noninterlaced,"capture non interlaced video"); #define dprintk(fmt, arg...) if (video_debug) \ printk(KERN_DEBUG "%s/video: " fmt, dev->name , ## arg) @@ -2087,7 +2087,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return saa7134_try_fmt(dev,fh,f); } -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT case VIDIOCGMBUF: { struct video_mbuf *mbuf = arg; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index d5ee99c..c04ce61 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -586,8 +586,8 @@ void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf); int saa7134_set_dmabits(struct saa7134_dev *dev); -extern int (*dmasound_init)(struct saa7134_dev *dev); -extern int (*dmasound_exit)(struct saa7134_dev *dev); +extern int (*saa7134_dmasound_init)(struct saa7134_dev *dev); +extern int (*saa7134_dmasound_exit)(struct saa7134_dev *dev); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index b36ba9f..5686547 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -2181,7 +2181,6 @@ static struct pci_device_id stradis_pci_tbl[] = { { 0 } }; -MODULE_DEVICE_TABLE(pci, stradis_pci_tbl); static struct pci_driver stradis_driver = { .name = "stradis", diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index f7eb402..40590ba 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -196,14 +196,6 @@ static void set_type(struct i2c_client *c, unsigned int type, i2c_master_send(c, buffer, 4); default_tuner_init(c); break; - case TUNER_LG_TDVS_H06XF: - /* Set the Auxiliary Byte. */ - buffer[2] &= ~0x20; - buffer[2] |= 0x18; - buffer[3] = 0x20; - i2c_master_send(c, buffer, 4); - default_tuner_init(c); - break; case TUNER_PHILIPS_TD1316: buffer[0] = 0x0b; buffer[1] = 0xdc; @@ -598,6 +590,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (t->standby) t->standby (client); break; +#ifdef CONFIG_VIDEO_V4L1 case VIDIOCSAUDIO: if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) return 0; @@ -607,17 +600,6 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) /* Should be implemented, since bttv calls it */ tuner_dbg("VIDIOCSAUDIO not implemented.\n"); break; - case TDA9887_SET_CONFIG: - if (t->type == TUNER_TDA9887) { - int *i = arg; - - t->tda9887_config = *i; - set_freq(client, t->tv_freq); - } - break; - /* --- v4l ioctls --- */ - /* take care: bttv does userspace copying, we'll get a - kernel pointer here... */ case VIDIOCSCHAN: { static const v4l2_std_id map[] = { @@ -701,7 +683,18 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO; return 0; } +#endif + case TDA9887_SET_CONFIG: + if (t->type == TUNER_TDA9887) { + int *i = arg; + t->tda9887_config = *i; + set_freq(client, t->tv_freq); + } + break; + /* --- v4l ioctls --- */ + /* take care: bttv does userspace copying, we'll get a + kernel pointer here... */ case VIDIOC_S_STD: { v4l2_std_id *id = arg; diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index d071c5c..abe37cf 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -339,7 +339,20 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) if (4 != (rc = i2c_master_send(c,buffer,4))) tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); - if (t->type == TUNER_MICROTUNE_4042FI5) { + switch (t->type) { + case TUNER_LG_TDVS_H06XF: + /* Set the Auxiliary Byte. */ + buffer[0] = buffer[2]; + buffer[0] &= ~0x20; + buffer[0] |= 0x18; + buffer[1] = 0x20; + tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]); + + if (2 != (rc = i2c_master_send(c,buffer,2))) + tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); + break; + case TUNER_MICROTUNE_4042FI5: + { // FIXME - this may also work for other tuners unsigned long timeout = jiffies + msecs_to_jiffies(1); u8 status_byte = 0; @@ -364,10 +377,12 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) buffer[2] = config; buffer[3] = cb; tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", - buffer[0],buffer[1],buffer[2],buffer[3]); + buffer[0],buffer[1],buffer[2],buffer[3]); if (4 != (rc = i2c_master_send(c,buffer,4))) tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); + break; + } } } diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig index 59fb899..a0fd82b 100644 --- a/drivers/media/video/usbvideo/Kconfig +++ b/drivers/media/video/usbvideo/Kconfig @@ -3,7 +3,7 @@ config VIDEO_USBVIDEO config USB_VICAM tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" - depends on USB && VIDEO_V4L1 && EXPERIMENTAL + depends on USB && VIDEO_DEV && VIDEO_V4L1 && EXPERIMENTAL select VIDEO_USBVIDEO ---help--- Say Y here if you have 3com homeconnect camera (vicam). @@ -13,7 +13,7 @@ config USB_VICAM config USB_IBMCAM tristate "USB IBM (Xirlink) C-it Camera support" - depends on USB && VIDEO_V4L1 + depends on USB && VIDEO_DEV && VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- Say Y here if you want to connect a IBM "C-It" camera, also known as @@ -28,7 +28,7 @@ config USB_IBMCAM config USB_KONICAWC tristate "USB Konica Webcam support" - depends on USB && VIDEO_V4L1 + depends on USB && VIDEO_DEV && VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- Say Y here if you want support for webcams based on a Konica @@ -39,7 +39,7 @@ config USB_KONICAWC config USB_QUICKCAM_MESSENGER tristate "USB Logitech Quickcam Messenger" - depends on USB && VIDEO_DEV + depends on USB && VIDEO_DEV && VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- Say Y or M here to enable support for the USB Logitech Quickcam diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index f06dc19..2ecbeff 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -202,7 +202,7 @@ static char *v4l2_memory_names[] = { /* ------------------------------------------------------------------ */ /* debug help functions */ -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT static const char *v4l1_ioctls[] = { [_IOC_NR(VIDIOCGCAP)] = "VIDIOCGCAP", [_IOC_NR(VIDIOCGCHAN)] = "VIDIOCGCHAN", @@ -301,7 +301,7 @@ static const char *v4l2_ioctls[] = { #define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls) static const char *v4l2_int_ioctls[] = { -#ifdef HAVE_VIDEO_DECODER +#ifdef CONFIG_V4L1_COMPAT [_IOC_NR(DECODER_GET_CAPABILITIES)] = "DECODER_GET_CAPABILITIES", [_IOC_NR(DECODER_GET_STATUS)] = "DECODER_GET_STATUS", [_IOC_NR(DECODER_SET_NORM)] = "DECODER_SET_NORM", @@ -367,7 +367,7 @@ void v4l_printk_ioctl(unsigned int cmd) (_IOC_NR(cmd) < V4L2_INT_IOCTLS) ? v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd); break; -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT case 'v': printk("v4l1 ioctl %s, dir=%s (0x%08x)\n", (_IOC_NR(cmd) < V4L1_IOCTLS) ? @@ -414,6 +414,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) printk ("%s: tuner type=%d\n", s, *p); break; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT case DECODER_SET_VBI_BYPASS: case DECODER_ENABLE_OUTPUT: case DECODER_GET_STATUS: @@ -424,6 +425,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) case VIDIOCCAPTURE: case VIDIOCSYNC: case VIDIOCSWRITEMODE: +#endif case TUNER_SET_TYPE_ADDR: case TUNER_SET_STANDBY: case TDA9887_SET_CONFIG: @@ -755,6 +757,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) p->afc); break; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGVBIFMT: case VIDIOCSVBIFMT: { @@ -924,6 +927,14 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) p->clipcount); break; } + case VIDIOCGFREQ: + case VIDIOCSFREQ: + { + unsigned long *p=arg; + printk ("%s: value=%lu\n", s, *p); + break; + } +#endif case VIDIOC_INT_AUDIO_CLOCK_FREQ: case VIDIOC_INT_I2S_CLOCK_FREQ: case VIDIOC_INT_S_STANDBY: @@ -933,13 +944,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) printk ("%s: value=%d\n", s, *p); break; } - case VIDIOCGFREQ: - case VIDIOCSFREQ: - { - unsigned long *p=arg; - printk ("%s: value=%lu\n", s, *p); - break; - } case VIDIOC_G_STD: case VIDIOC_S_STD: case VIDIOC_QUERYSTD: diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index b26ebaf..0fc90cd 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -760,7 +760,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret=vfd->vidioc_overlay(file, fh, *i); break; } -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { @@ -1512,6 +1512,7 @@ int video_register_device(struct video_device *vfd, int type, int nr) int i=0; int base; int end; + int ret; char *name_base; switch(type) @@ -1537,6 +1538,8 @@ int video_register_device(struct video_device *vfd, int type, int nr) name_base = "radio"; break; default: + printk(KERN_ERR "%s called with unknown type: %d\n", + __FUNCTION__, type); return -1; } @@ -1571,9 +1574,18 @@ int video_register_device(struct video_device *vfd, int type, int nr) vfd->class_dev.class = &video_class; vfd->class_dev.devt = MKDEV(VIDEO_MAJOR, vfd->minor); sprintf(vfd->class_dev.class_id, "%s%d", name_base, i - base); - class_device_register(&vfd->class_dev); - class_device_create_file(&vfd->class_dev, - &class_device_attr_name); + ret = class_device_register(&vfd->class_dev); + if (ret < 0) { + printk(KERN_ERR "%s: class_device_register failed\n", + __FUNCTION__); + goto fail_minor; + } + ret = class_device_create_file(&vfd->class_dev, &class_device_attr_name); + if (ret < 0) { + printk(KERN_ERR "%s: class_device_create_file 'name' failed\n", + __FUNCTION__); + goto fail_classdev; + } #if 1 /* needed until all drivers are fixed */ @@ -1583,6 +1595,15 @@ int video_register_device(struct video_device *vfd, int type, int nr) "http://lwn.net/Articles/36850/\n", vfd->name); #endif return 0; + +fail_classdev: + class_device_unregister(&vfd->class_dev); +fail_minor: + mutex_lock(&videodev_lock); + video_device[vfd->minor] = NULL; + vfd->minor = -1; + mutex_unlock(&videodev_lock); + return ret; } /** diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 41d23c8..38bd0c1 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -986,7 +986,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) file->f_flags & O_NONBLOCK)); } -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf) { struct vivi_fh *fh=priv; @@ -1328,7 +1328,7 @@ static struct video_device vivi = { .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, -#ifdef HAVE_V4L1 +#ifdef CONFIG_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif .tvnorms = tvnorms, diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig index b14e890..0a0e0cd 100644 --- a/drivers/net/appletalk/Kconfig +++ b/drivers/net/appletalk/Kconfig @@ -29,7 +29,7 @@ config ATALK even politically correct people are allowed to say Y here. config DEV_APPLETALK - bool "Appletalk interfaces support" + tristate "Appletalk interfaces support" depends on ATALK help AppleTalk is the protocol that Apple computers can use to communicate diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index da62db8..627f224 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3127,7 +3127,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) break; } - /* NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size * i.e. RXBUFFER_2048 --> size-4096 slab */ @@ -3708,7 +3708,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, #define E1000_CB_LENGTH 256 if (length < E1000_CB_LENGTH) { struct sk_buff *new_skb = - dev_alloc_skb(length + NET_IP_ALIGN); + netdev_alloc_skb(netdev, length + NET_IP_ALIGN); if (new_skb) { skb_reserve(new_skb, NET_IP_ALIGN); new_skb->dev = netdev; @@ -3979,7 +3979,7 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter, while (cleaned_count--) { if (!(skb = buffer_info->skb)) - skb = dev_alloc_skb(bufsz); + skb = netdev_alloc_skb(netdev, bufsz); else { skb_trim(skb, 0); goto map_skb; @@ -3997,7 +3997,7 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter, DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes " "at %p\n", bufsz, skb->data); /* Try again, without freeing the previous */ - skb = dev_alloc_skb(bufsz); + skb = netdev_alloc_skb(netdev, bufsz); /* Failed allocation, critical failure */ if (!skb) { dev_kfree_skb(oldskb); @@ -4121,7 +4121,8 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, rx_desc->read.buffer_addr[j+1] = ~0; } - skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN); + skb = netdev_alloc_skb(netdev, + adapter->rx_ps_bsize0 + NET_IP_ALIGN); if (unlikely(!skb)) { adapter->alloc_rx_buff_failed++; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 1b8138f..6f97962 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.63" -#define DRV_MODULE_RELDATE "July 25, 2006" +#define DRV_MODULE_VERSION "3.64" +#define DRV_MODULE_RELDATE "July 31, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -3097,7 +3097,7 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key, * Callers depend upon this behavior and assume that * we leave everything unchanged if we fail. */ - skb = dev_alloc_skb(skb_size); + skb = netdev_alloc_skb(tp->dev, skb_size); if (skb == NULL) return -ENOMEM; @@ -3270,7 +3270,7 @@ static int tg3_rx(struct tg3 *tp, int budget) tg3_recycle_rx(tp, opaque_key, desc_idx, *post_ptr); - copy_skb = dev_alloc_skb(len + 2); + copy_skb = netdev_alloc_skb(tp->dev, len + 2); if (copy_skb == NULL) goto drop_it_no_recycle; @@ -8618,7 +8618,7 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) err = -EIO; tx_len = 1514; - skb = dev_alloc_skb(tx_len); + skb = netdev_alloc_skb(tp->dev, tx_len); if (!skb) return -ENOMEM; diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 622b3f8..f8ae2b7 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -61,7 +61,7 @@ struct pci_bus * __devinit pci_find_bus(int domain, int busnr) * @from: Previous PCI bus found, or %NULL for new search. * * Iterates through the list of known PCI busses. A new search is - * initiated by passing %NULL to the @from argument. Otherwise if + * initiated by passing %NULL as the @from argument. Otherwise if * @from is not %NULL, searches continue from next device on the * global list. */ @@ -148,13 +148,14 @@ struct pci_dev * pci_get_slot(struct pci_bus *bus, unsigned int devfn) * @from: Previous PCI device found in search, or %NULL for new search. * * Iterates through the list of known PCI devices. If a PCI device is - * found with a matching @vendor, @device, @ss_vendor and @ss_device, a pointer to its - * device structure is returned. Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL to the @from argument. - * Otherwise if @from is not %NULL, searches continue from next device on the global list. + * found with a matching @vendor, @device, @ss_vendor and @ss_device, a + * pointer to its device structure is returned. Otherwise, %NULL is returned. + * A new search is initiated by passing %NULL as the @from argument. + * Otherwise if @from is not %NULL, searches continue from next device + * on the global list. * - * NOTE: Do not use this function anymore, use pci_get_subsys() instead, as - * the pci device returned by this function can disappear at any moment in + * NOTE: Do not use this function any more; use pci_get_subsys() instead, as + * the PCI device returned by this function can disappear at any moment in * time. */ static struct pci_dev * pci_find_subsys(unsigned int vendor, @@ -191,14 +192,15 @@ exit: * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids * @from: Previous PCI device found in search, or %NULL for new search. * - * Iterates through the list of known PCI devices. If a PCI device is - * found with a matching @vendor and @device, a pointer to its device structure is + * Iterates through the list of known PCI devices. If a PCI device is found + * with a matching @vendor and @device, a pointer to its device structure is * returned. Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL to the @from argument. - * Otherwise if @from is not %NULL, searches continue from next device on the global list. + * A new search is initiated by passing %NULL as the @from argument. + * Otherwise if @from is not %NULL, searches continue from next device + * on the global list. * - * NOTE: Do not use this function anymore, use pci_get_device() instead, as - * the pci device returned by this function can disappear at any moment in + * NOTE: Do not use this function any more; use pci_get_device() instead, as + * the PCI device returned by this function can disappear at any moment in * time. */ struct pci_dev * @@ -215,11 +217,11 @@ pci_find_device(unsigned int vendor, unsigned int device, const struct pci_dev * * @ss_device: PCI subsystem device id to match, or %PCI_ANY_ID to match all device ids * @from: Previous PCI device found in search, or %NULL for new search. * - * Iterates through the list of known PCI devices. If a PCI device is - * found with a matching @vendor, @device, @ss_vendor and @ss_device, a pointer to its + * Iterates through the list of known PCI devices. If a PCI device is found + * with a matching @vendor, @device, @ss_vendor and @ss_device, a pointer to its * device structure is returned, and the reference count to the device is * incremented. Otherwise, %NULL is returned. A new search is initiated by - * passing %NULL to the @from argument. Otherwise if @from is not %NULL, + * passing %NULL as the @from argument. Otherwise if @from is not %NULL, * searches continue from next device on the global list. * The reference count for @from is always decremented if it is not %NULL. */ @@ -262,7 +264,7 @@ exit: * found with a matching @vendor and @device, the reference count to the * device is incremented and a pointer to its device structure is returned. * Otherwise, %NULL is returned. A new search is initiated by passing %NULL - * to the @from argument. Otherwise if @from is not %NULL, searches continue + * as the @from argument. Otherwise if @from is not %NULL, searches continue * from next device on the global list. The reference count for @from is * always decremented if it is not %NULL. */ @@ -279,11 +281,13 @@ pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from) * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids * @from: Previous PCI device found in search, or %NULL for new search. * - * Iterates through the list of known PCI devices in the reverse order of pci_find_device(). + * Iterates through the list of known PCI devices in the reverse order of + * pci_find_device(). * If a PCI device is found with a matching @vendor and @device, a pointer to * its device structure is returned. Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL to the @from argument. - * Otherwise if @from is not %NULL, searches continue from previous device on the global list. + * A new search is initiated by passing %NULL as the @from argument. + * Otherwise if @from is not %NULL, searches continue from previous device + * on the global list. */ struct pci_dev * pci_find_device_reverse(unsigned int vendor, unsigned int device, const struct pci_dev *from) @@ -317,7 +321,7 @@ exit: * found with a matching @class, the reference count to the device is * incremented and a pointer to its device structure is returned. * Otherwise, %NULL is returned. - * A new search is initiated by passing %NULL to the @from argument. + * A new search is initiated by passing %NULL as the @from argument. * Otherwise if @from is not %NULL, searches continue from next device * on the global list. The reference count for @from is always decremented * if it is not %NULL. diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 738b1ef..9ad18e6 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -601,12 +601,8 @@ static int ds_ioctl(struct inode * inode, struct file * file, ret = CS_BAD_ARGS; else { struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function); - if (p_dev == NULL) - ret = CS_BAD_ARGS; - else { - ret = pccard_get_configuration_info(s, p_dev, &buf->config); - pcmcia_put_dev(p_dev); - } + ret = pccard_get_configuration_info(s, p_dev, &buf->config); + pcmcia_put_dev(p_dev); } break; case DS_GET_FIRST_TUPLE: @@ -636,12 +632,8 @@ static int ds_ioctl(struct inode * inode, struct file * file, ret = CS_BAD_ARGS; else { struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function); - if (p_dev == NULL) - ret = CS_BAD_ARGS; - else { - ret = pccard_get_status(s, p_dev, &buf->status); - pcmcia_put_dev(p_dev); - } + ret = pccard_get_status(s, p_dev, &buf->status); + pcmcia_put_dev(p_dev); } break; case DS_VALIDATE_CIS: diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 7bf25b8..c832339 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -245,10 +245,17 @@ int pccard_get_configuration_info(struct pcmcia_socket *s, return CS_SUCCESS; } - /* !!! This is a hack !!! */ - memcpy(&config->Attributes, &c->Attributes, sizeof(config_t)); - config->Attributes |= CONF_VALID_CLIENT; - config->CardValues = c->CardValues; + config->Attributes = c->Attributes | CONF_VALID_CLIENT; + config->Vcc = s->socket.Vcc; + config->Vpp1 = config->Vpp2 = s->socket.Vpp; + config->IntType = c->IntType; + config->ConfigBase = c->ConfigBase; + config->Status = c->Status; + config->Pin = c->Pin; + config->Copy = c->Copy; + config->Option = c->Option; + config->ExtStatus = c->ExtStatus; + config->Present = config->CardValues = c->CardValues; config->IRQAttributes = c->irq.Attributes; config->AssignedIRQ = s->irq.AssignedIRQ; config->BasePort1 = c->io.BasePort1; diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c index b154b3f..551f58e 100644 --- a/drivers/pnp/pnpbios/core.c +++ b/drivers/pnp/pnpbios/core.c @@ -346,7 +346,7 @@ static int insert_device(struct pnp_dev *dev, struct pnp_bios_node * node) dev->flags = node->flags; if (!(dev->flags & PNPBIOS_NO_CONFIG)) dev->capabilities |= PNP_CONFIGURABLE; - if (!(dev->flags & PNPBIOS_NO_DISABLE)) + if (!(dev->flags & PNPBIOS_NO_DISABLE) && pnpbios_is_dynamic(dev)) dev->capabilities |= PNP_DISABLE; dev->capabilities |= PNP_READ; if (pnpbios_is_dynamic(dev)) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 35058f9..f5734a9 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1076,14 +1076,8 @@ static void ahci_host_intr(struct ata_port *ap) return; /* ignore interim PIO setup fis interrupts */ - if (ata_tag_valid(ap->active_tag)) { - struct ata_queued_cmd *qc = - ata_qc_from_tag(ap, ap->active_tag); - - if (qc && qc->tf.protocol == ATA_PROT_PIO && - (status & PORT_IRQ_PIOS_FIS)) - return; - } + if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) + return; if (ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " diff --git a/drivers/scsi/aic7xxx/aicasm/Makefile b/drivers/scsi/aic7xxx/aicasm/Makefile index 8c91fda..b98c5c1 100644 --- a/drivers/scsi/aic7xxx/aicasm/Makefile +++ b/drivers/scsi/aic7xxx/aicasm/Makefile @@ -14,6 +14,8 @@ LIBS= -ldb clean-files:= ${GENSRCS} ${GENHDRS} $(YSRCS:.y=.output) $(PROG) # Override default kernel CFLAGS. This is a userland app. AICASM_CFLAGS:= -I/usr/include -I. +LEX= flex +YACC= bison YFLAGS= -d NOMAN= noman diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 2ee742d..0050431 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_S3C2410 default y if PXA27x default y if ARCH_EP93XX - default y if ARCH_AT91RM9200 + default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261) # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index f7bdd94..218621b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -517,19 +517,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig static struct usb_device *usbdev_lookup_minor(int minor) { - struct device *device; - struct usb_device *udev = NULL; + struct class_device *class_dev; + struct usb_device *dev = NULL; down(&usb_device_class->sem); - list_for_each_entry(device, &usb_device_class->devices, node) { - if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { - udev = device->platform_data; + list_for_each_entry(class_dev, &usb_device_class->children, node) { + if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { + dev = class_dev->class_data; break; } } up(&usb_device_class->sem); - return udev; + return dev; }; /* @@ -1580,16 +1580,16 @@ static void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->usbfs_dev = device_create(usb_device_class, &dev->dev, - MKDEV(USB_DEVICE_MAJOR, minor), + dev->class_dev = class_device_create(usb_device_class, NULL, + MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev, "usbdev%d.%d", dev->bus->busnum, dev->devnum); - dev->usbfs_dev->platform_data = dev; + dev->class_dev->class_data = dev; } static void usbdev_remove(struct usb_device *dev) { - device_unregister(dev->usbfs_dev); + class_device_unregister(dev->class_dev); } static int usbdev_notify(struct notifier_block *self, unsigned long action, diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index abee0f5..8de4f8c 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -194,13 +194,14 @@ int usb_register_dev(struct usb_interface *intf, ++temp; else temp = name; - intf->usb_dev = device_create(usb_class->class, &intf->dev, - MKDEV(USB_MAJOR, minor), "%s", temp); - if (IS_ERR(intf->usb_dev)) { + intf->class_dev = class_device_create(usb_class->class, NULL, + MKDEV(USB_MAJOR, minor), + &intf->dev, "%s", temp); + if (IS_ERR(intf->class_dev)) { spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; spin_unlock (&minor_lock); - retval = PTR_ERR(intf->usb_dev); + retval = PTR_ERR(intf->class_dev); } exit: return retval; @@ -241,8 +242,8 @@ void usb_deregister_dev(struct usb_interface *intf, spin_unlock (&minor_lock); snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base); - device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); - intf->usb_dev = NULL; + class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); + intf->class_dev = NULL; intf->minor = -1; destroy_usb_class(); } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 363b2ad..1a32d96 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -207,7 +207,7 @@ config USB_AT91 config USB_GADGET_DUMMY_HCD boolean "Dummy HCD (DEVELOPMENT)" - depends on USB && EXPERIMENTAL + depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL select USB_GADGET_DUALSPEED help This host controller driver emulates USB, looping all data transfer diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 1c459ff..cfebca0 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -57,19 +57,23 @@ /* * This controller is simple and PIO-only. It's used in many AT91-series - * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU), - * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions. + * full speed USB controllers, including the at91rm9200 (arm920T, with MMU), + * at91sam926x (arm926ejs, with MMU), and several no-mmu versions. * * This driver expects the board has been wired with two GPIOs suppporting * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the - * testing hasn't covered such cases.) The pullup is most important; it + * testing hasn't covered such cases.) + * + * The pullup is most important (so it's integrated on sam926x parts). It * provides software control over whether the host enumerates the device. + * * The VBUS sensing helps during enumeration, and allows both USB clocks * (and the transceiver) to stay gated off until they're necessary, saving - * power. During USB suspend, the 48 MHz clock is gated off. + * power. During USB suspend, the 48 MHz clock is gated off in hardware; + * it may also be gated off by software during some Linux sleep states. */ -#define DRIVER_VERSION "8 March 2005" +#define DRIVER_VERSION "3 May 2006" static const char driver_name [] = "at91_udc"; static const char ep0name[] = "ep0"; @@ -316,9 +320,15 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status) * * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE * that shouldn't normally be changed. + * + * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains, + * implying a need to wait for one write to complete (test relevant bits) + * before starting the next write. This shouldn't be an issue given how + * infrequently we write, except maybe for write-then-read idioms. */ #define SET_FX (AT91_UDP_TXPKTRDY) -#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) +#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP \ + | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) /* pull OUT packet data from the endpoint's fifo */ static int read_fifo (struct at91_ep *ep, struct at91_request *req) @@ -472,7 +482,8 @@ static void nuke(struct at91_ep *ep, int status) /*-------------------------------------------------------------------------*/ -static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +static int at91_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); struct at91_udc *dev = ep->udc; @@ -582,11 +593,12 @@ static int at91_ep_disable (struct usb_ep * _ep) * interesting for request or buffer allocation. */ -static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags) +static struct usb_request * +at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags) { struct at91_request *req; - req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL); + req = kcalloc(1, sizeof (struct at91_request), gfp_flags); if (!req) return NULL; @@ -862,6 +874,7 @@ static void stop_activity(struct at91_udc *udc) if (udc->gadget.speed == USB_SPEED_UNKNOWN) driver = NULL; udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; for (i = 0; i < NUM_ENDPOINTS; i++) { struct at91_ep *ep = &udc->ep[i]; @@ -889,8 +902,8 @@ static void clk_off(struct at91_udc *udc) return; udc->clocked = 0; udc->gadget.speed = USB_SPEED_UNKNOWN; - clk_disable(udc->iclk); clk_disable(udc->fclk); + clk_disable(udc->iclk); } /* @@ -911,9 +924,6 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); at91_set_gpio_value(udc->board.pullup_pin, 0); clk_off(udc); - - // REVISIT: with transceiver disabled, will D- float - // so that a host would falsely detect a device? } } @@ -1290,7 +1300,8 @@ static void handle_ep0(struct at91_udc *udc) if (udc->wait_for_addr_ack) { u32 tmp; - at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr); + at91_udp_write(AT91_UDP_FADDR, + AT91_UDP_FEN | udc->addr); tmp = at91_udp_read(AT91_UDP_GLB_STAT); tmp &= ~AT91_UDP_FADDEN; if (udc->addr) @@ -1361,9 +1372,10 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) u32 rescans = 5; while (rescans--) { - u32 status = at91_udp_read(AT91_UDP_ISR); + u32 status; - status &= at91_udp_read(AT91_UDP_IMR); + status = at91_udp_read(AT91_UDP_ISR) + & at91_udp_read(AT91_UDP_IMR); if (!status) break; @@ -1379,18 +1391,17 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) stop_activity(udc); /* enable ep0 */ - at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); + at91_udp_write(AT91_UDP_CSR(0), + AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); udc->gadget.speed = USB_SPEED_FULL; udc->suspended = 0; at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0)); /* * NOTE: this driver keeps clocks off unless the - * USB host is present. That saves power, and also - * eliminates IRQs (reset, resume, suspend) that can - * otherwise flood from the controller. If your - * board doesn't support VBUS detection, suspend and - * resume irq logic may need more attention... + * USB host is present. That saves power, but for + * boards that don't support VBUS detection, both + * clocks need to be active most of the time. */ /* host initiated suspend (3+ms bus idle) */ @@ -1452,13 +1463,19 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) /*-------------------------------------------------------------------------*/ +static void nop_release(struct device *dev) +{ + /* nothing to free */ +} + static struct at91_udc controller = { .gadget = { - .ops = &at91_udc_ops, - .ep0 = &controller.ep[0].ep, - .name = driver_name, - .dev = { - .bus_id = "gadget" + .ops = &at91_udc_ops, + .ep0 = &controller.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, } }, .ep[0] = { @@ -1468,7 +1485,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(0)), .int_mask = 1 << 0, }, .ep[1] = { @@ -1479,7 +1497,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(1)), .int_mask = 1 << 1, }, .ep[2] = { @@ -1490,7 +1509,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(2)), .int_mask = 1 << 2, }, .ep[3] = { @@ -1501,7 +1521,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(3)), .int_mask = 1 << 3, }, .ep[4] = { @@ -1512,7 +1533,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(4)), .int_mask = 1 << 4, }, .ep[5] = { @@ -1523,10 +1545,11 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(5)), .int_mask = 1 << 5, }, - /* ep6 and ep7 are also reserved */ + /* ep6 and ep7 are also reserved (custom silicon might use them) */ }; static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r) @@ -1593,6 +1616,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) local_irq_disable(); udc->enabled = 0; + at91_udp_write(AT91_UDP_IDR, ~0); pullup(udc, 0); local_irq_enable(); @@ -1624,6 +1648,16 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return -ENODEV; } + if (pdev->num_resources != 2) { + DBG("invalid num_resources"); + return -ENODEV; + } + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + DBG("invalid resource type"); + return -ENODEV; + } + if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; @@ -1649,19 +1683,26 @@ static int __devinit at91udc_probe(struct platform_device *pdev) if (retval < 0) goto fail0; - /* disable everything until there's a gadget driver and vbus */ - pullup(udc, 0); + /* don't do anything until we have both gadget driver and VBUS */ + clk_enable(udc->iclk); + at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + at91_udp_write(AT91_UDP_IDR, 0xffffffff); + clk_disable(udc->iclk); /* request UDC and maybe VBUS irqs */ - if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request irq %d failed\n", AT91_ID_UDP); + udc->udp_irq = platform_get_irq(pdev, 0); + if (request_irq(udc->udp_irq, at91_udc_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request irq %d failed\n", udc->udp_irq); retval = -EBUSY; goto fail1; } if (udc->board.vbus_pin > 0) { - if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request vbus irq %d failed\n", udc->board.vbus_pin); - free_irq(AT91_ID_UDP, udc); + if (request_irq(udc->board.vbus_pin, at91_vbus_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request vbus irq %d failed\n", + udc->board.vbus_pin); + free_irq(udc->udp_irq, udc); retval = -EBUSY; goto fail1; } @@ -1670,6 +1711,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) udc->vbus = 1; } dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); create_debug_file(udc); INFO("%s version %s\n", driver_name, DRIVER_VERSION); @@ -1678,14 +1720,14 @@ static int __devinit at91udc_probe(struct platform_device *pdev) fail1: device_unregister(&udc->gadget.dev); fail0: - release_mem_region(AT91_VA_BASE_UDP, SZ_16K); + release_mem_region(AT91_BASE_UDP, SZ_16K); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } -static int __devexit at91udc_remove(struct platform_device *dev) +static int __devexit at91udc_remove(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); DBG("remove\n"); @@ -1694,10 +1736,11 @@ static int __devexit at91udc_remove(struct platform_device *dev) if (udc->driver != 0) usb_gadget_unregister_driver(udc->driver); + device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); if (udc->board.vbus_pin > 0) free_irq(udc->board.vbus_pin, udc); - free_irq(AT91_ID_UDP, udc); + free_irq(udc->udp_irq, udc); device_unregister(&udc->gadget.dev); release_mem_region(AT91_BASE_UDP, SZ_16K); @@ -1708,31 +1751,36 @@ static int __devexit at91udc_remove(struct platform_device *dev) } #ifdef CONFIG_PM -static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg) +static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); + int wake = udc->driver && device_may_wakeup(&pdev->dev); - /* - * The "safe" suspend transitions are opportunistic ... e.g. when - * the USB link is suspended (48MHz clock autogated off), or when - * it's disconnected (programmatically gated off, elsewhere). - * Then we can suspend, and the chip can enter slow clock mode. - * - * The problem case is some component (user mode?) suspending this - * device while it's active, with the 48 MHz clock in use. There - * are two basic approaches: (a) veto suspend levels involving slow - * clock mode, (b) disconnect, so 48 MHz will no longer be in use - * and we can enter slow clock mode. This uses (b) for now, since - * it's simplest until AT91 PM exists and supports the other option. + /* Unless we can act normally to the host (letting it wake us up + * whenever it has work for us) force disconnect. Wakeup requires + * PLLB for USB events (signaling for reset, wakeup, or incoming + * tokens) and VBUS irqs (on systems which support them). */ - if (udc->vbus && !udc->suspended) + if ((!udc->suspended && udc->addr) + || !wake + || at91_suspend_entering_slow_clock()) { pullup(udc, 0); + disable_irq_wake(udc->udp_irq); + } else + enable_irq_wake(udc->udp_irq); + + if (udc->board.vbus_pin > 0) { + if (wake) + enable_irq_wake(udc->board.vbus_pin); + else + disable_irq_wake(udc->board.vbus_pin); + } return 0; } -static int at91udc_resume(struct platform_device *dev) +static int at91udc_resume(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); /* maybe reconnect to host; if so, clocks on */ pullup(udc, 1); @@ -1748,7 +1796,7 @@ static struct platform_driver at91_udc = { .remove = __devexit_p(at91udc_remove), .shutdown = at91udc_shutdown, .suspend = at91udc_suspend, - .resume = at91udc_resume, + .resume = at91udc_resume, .driver = { .name = (char *) driver_name, .owner = THIS_MODULE, @@ -1767,6 +1815,6 @@ static void __devexit udc_exit_module(void) } module_exit(udc_exit_module); -MODULE_DESCRIPTION("AT91RM9200 udc driver"); +MODULE_DESCRIPTION("AT91 udc driver"); MODULE_AUTHOR("Thomas Rathbone, David Brownell"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 5a4799c..882af42 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -141,6 +141,7 @@ struct at91_udc { struct clk *iclk, *fclk; struct platform_device *pdev; struct proc_dir_entry *pde; + int udp_irq; }; static inline struct at91_udc *to_udc(struct usb_gadget *g) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4be4719..7d1c22c 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -609,7 +609,8 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) if (!dum->driver) return -ESHUTDOWN; - spin_lock_irqsave (&dum->lock, flags); + local_irq_save (flags); + spin_lock (&dum->lock); list_for_each_entry (req, &ep->queue, queue) { if (&req->req == _req) { list_del_init (&req->queue); @@ -618,7 +619,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) break; } } - spin_unlock_irqrestore (&dum->lock, flags); + spin_unlock (&dum->lock); if (retval == 0) { dev_dbg (udc_dev(dum), @@ -626,6 +627,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) req, _ep->name, _req->length, _req->buf); _req->complete (_ep, _req); } + local_irq_restore (flags); return retval; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 85b0b4a..d63177a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -892,7 +892,7 @@ MODULE_LICENSE ("GPL"); #define PCI_DRIVER ehci_pci_driver #endif -#ifdef CONFIG_PPC_83xx +#ifdef CONFIG_MPC834x #include "ehci-fsl.c" #define PLATFORM_DRIVER ehci_fsl_driver #endif diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index cdbafb7..85cc059 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -4,7 +4,7 @@ * Copyright (C) 2004 SAN People (Pty) Ltd. * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * - * AT91RM9200 Bus Glue + * AT91 Bus Glue * * Based on fragments of 2.4 driver by Rick Bronson. * Based on ohci-omap.c @@ -19,12 +19,13 @@ #include <asm/hardware.h> #include <asm/arch/board.h> -#ifndef CONFIG_ARCH_AT91RM9200 -#error "CONFIG_ARCH_AT91RM9200 must be defined." +#ifndef CONFIG_ARCH_AT91 +#error "CONFIG_ARCH_AT91 must be defined." #endif /* interface and function clocks */ static struct clk *iclk, *fclk; +static int clocked; extern int usb_disabled(void); @@ -35,13 +36,14 @@ static void at91_start_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "start\n"); /* * Start the USB clocks. */ clk_enable(iclk); clk_enable(fclk); + clocked = 1; /* * The USB host controller must remain in reset. @@ -54,7 +56,7 @@ static void at91_stop_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "stop\n"); /* * Put the USB host controller into reset. @@ -66,6 +68,7 @@ static void at91_stop_hc(struct platform_device *pdev) */ clk_disable(fclk); clk_disable(iclk); + clocked = 0; } @@ -78,14 +81,15 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /** - * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs + * usb_hcd_at91_probe - initialize AT91-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev) +static int usb_hcd_at91_probe(const struct hc_driver *driver, + struct platform_device *pdev) { int retval; struct usb_hcd *hcd = NULL; @@ -95,12 +99,13 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * return -ENODEV; } - if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { pr_debug("hcd probe: invalid resource type\n"); return -ENODEV; } - hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200"); + hcd = usb_create_hcd(driver, &pdev->dev, "at91"); if (!hcd) return -ENOMEM; hcd->rsrc_start = pdev->resource[0].start; @@ -149,21 +154,23 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * /* may be called with controller, bus, and devices active */ /** - * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs + * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_at91_probe(), first invoking * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. + * context, "rmmod" or something similar. * */ -static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static int usb_hcd_at91_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); at91_stop_hc(pdev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + disable_irq_wake(hcd->irq); clk_put(fclk); clk_put(iclk); @@ -178,19 +185,21 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde static int __devinit ohci_at91_start (struct usb_hcd *hcd) { -// struct at91_ohci_data *board = hcd->self.controller->platform_data; + struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); + struct usb_device *root = hcd->self.root_hub; int ret; if ((ret = ohci_init(ohci)) < 0) return ret; + root->maxchild = board->ports; + if ((ret = ohci_run(ohci)) < 0) { err("can't start %s", hcd->self.bus_name); ohci_stop(hcd); return ret; } -// hcd->self.root_hub->maxchild = board->ports; return 0; } @@ -198,7 +207,7 @@ ohci_at91_start (struct usb_hcd *hcd) static const struct hc_driver ohci_at91_hc_driver = { .description = hcd_name, - .product_desc = "AT91RM9200 OHCI", + .product_desc = "AT91 OHCI", .hcd_priv_size = sizeof(struct ohci_hcd), /* @@ -240,33 +249,54 @@ static const struct hc_driver ohci_at91_hc_driver = { /*-------------------------------------------------------------------------*/ -static int ohci_hcd_at91_drv_probe(struct platform_device *dev) +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev); + device_init_wakeup(&pdev->dev, 1); + return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int ohci_hcd_at91_drv_remove(struct platform_device *dev) +static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) { - return usb_hcd_at91_remove(platform_get_drvdata(dev), dev); + device_init_wakeup(&pdev->dev, 0); + return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); } #ifdef CONFIG_PM -/* REVISIT suspend/resume look "too" simple here */ - static int -ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg) +ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) { - clk_disable(fclk); - clk_disable(iclk); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(hcd->irq); + else + disable_irq_wake(hcd->irq); + + /* + * The integrated transceivers seem unable to notice disconnect, + * reconnect, or wakeup without the 48 MHz clock active. so for + * correctness, always discard connection state (using reset). + * + * REVISIT: some boards will be able to turn VBUS off... + */ + if (at91_suspend_entering_slow_clock()) { + ohci_usb_reset (ohci); + clk_disable(fclk); + clk_disable(iclk); + clocked = 0; + } return 0; } -static int ohci_hcd_at91_drv_resume(struct platform_device *dev) +static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) { - clk_enable(iclk); - clk_enable(fclk); + if (!clocked) { + clk_enable(iclk); + clk_enable(fclk); + } return 0; } @@ -275,7 +305,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev) #define ohci_hcd_at91_drv_resume NULL #endif -MODULE_ALIAS("at91rm9200-ohci"); +MODULE_ALIAS("at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, @@ -283,7 +313,7 @@ static struct platform_driver ohci_hcd_at91_driver = { .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, .driver = { - .name = "at91rm9200-ohci", + .name = "at91_ohci", .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index afef5ac..94d8cf4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -913,7 +913,7 @@ MODULE_LICENSE ("GPL"); #include "ohci-ppc-soc.c" #endif -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261) #include "ohci-at91.c" #endif @@ -927,6 +927,7 @@ MODULE_LICENSE ("GPL"); || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ || defined (CONFIG_ARCH_AT91RM9200) \ + || defined (CONFIG_ARCH_AT91SAM9261) \ ) #error "missing bus glue for ohci-hcd" #endif diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index c9d72ac..66c3f61 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -943,7 +943,9 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) /* We received a short packet */ if (urb->transfer_flags & URB_SHORT_NOT_OK) ret = -EREMOTEIO; - else if (ctrlstat & TD_CTRL_SPD) + + /* Fixup needed only if this isn't the URB's last TD */ + else if (&td->list != urbp->td_list.prev) ret = 1; } diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 05d2d60..df198cf 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -152,9 +152,8 @@ static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; * events. The hardware generates 5 events for the first keypress * and we have to take this into account for an accurate repeat * behaviour. - * (HZ / 20) == 50 ms and works well for me. */ -#define FILTER_TIME (HZ / 20) +#define FILTER_TIME 60 /* msec */ struct ati_remote { struct input_dev *idev; @@ -467,7 +466,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) /* Filter duplicate events which happen "too close" together. */ if ((ati_remote->old_data[0] == data[1]) && (ati_remote->old_data[1] == data[2]) && - time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) { + time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(FILTER_TIME))) { ati_remote->repeat_count++; } else { ati_remote->repeat_count = 0; diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index e091d32..a4062a6 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -12,8 +12,13 @@ * the single I/O ports of the device. * * Supported vendors: AK Modul-Bus Computer GmbH -* Supported devices: CY7C63001A-PC (to be continued...) -* Supported functions: Read/Write Ports (to be continued...) +* (Firmware "Port-Chip") +* +* Supported devices: CY7C63001A-PC +* CY7C63001C-PXC +* CY7C63001C-SXC +* +* Supported functions: Read/Write Ports * * * This program is free software; you can redistribute it and/or diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index e5e6e4f..bd09232 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -175,6 +175,8 @@ static inline struct sk_buff *pull_skb(rtl8150_t *); static void rtl8150_disconnect(struct usb_interface *intf); static int rtl8150_probe(struct usb_interface *intf, const struct usb_device_id *id); +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message); +static int rtl8150_resume(struct usb_interface *intf); static const char driver_name [] = "rtl8150"; @@ -183,6 +185,8 @@ static struct usb_driver rtl8150_driver = { .probe = rtl8150_probe, .disconnect = rtl8150_disconnect, .id_table = rtl8150_table, + .suspend = rtl8150_suspend, + .resume = rtl8150_resume }; /* @@ -238,9 +242,11 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) usb_fill_control_urb(dev->ctrl_urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr, &dev->rx_creg, size, ctrl_callback, dev); - if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) + if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { + if (ret == -ENODEV) + netif_device_detach(dev->netdev); err("control request submission failed: %d", ret); - else + } else set_bit(RX_REG_SET, &dev->flags); return ret; @@ -416,6 +422,7 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) struct sk_buff *skb; struct net_device *netdev; u16 rx_stat; + int status; dev = urb->context; if (!dev) @@ -465,7 +472,10 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) goon: usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto resched; } else { @@ -481,6 +491,7 @@ static void rx_fixup(unsigned long data) { rtl8150_t *dev; struct sk_buff *skb; + int status; dev = (rtl8150_t *)data; @@ -499,10 +510,13 @@ static void rx_fixup(unsigned long data) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); try_again: - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) { + netif_device_detach(dev->netdev); + } else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto tlsched; - } else { + } else { clear_bit(RX_URB_FAIL, &dev->flags); } @@ -574,12 +588,43 @@ static void intr_callback(struct urb *urb, struct pt_regs *regs) resubmit: status = usb_submit_urb (urb, SLAB_ATOMIC); - if (status) + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) err ("can't resubmit intr, %s-%s/input0, status %d", dev->udev->bus->bus_name, dev->udev->devpath, status); } +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_detach(dev->netdev); + + if (netif_running(dev->netdev)) { + usb_kill_urb(dev->rx_urb); + usb_kill_urb(dev->intr_urb); + } + return 0; +} + +static int rtl8150_resume(struct usb_interface *intf) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_attach(dev->netdev); + if (netif_running(dev->netdev)) { + dev->rx_urb->status = 0; + dev->rx_urb->actual_length = 0; + read_bulk_callback(dev->rx_urb, NULL); + + dev->intr_urb->status = 0; + dev->intr_urb->actual_length = 0; + intr_callback(dev->intr_urb, NULL); + } + return 0; +} /* ** @@ -690,9 +735,14 @@ static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev) usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), skb->data, count, write_bulk_callback, dev); if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) { - warn("failed tx_urb %d\n", res); - dev->stats.tx_errors++; - netif_start_queue(netdev); + /* Can we get/handle EPIPE here? */ + if (res == -ENODEV) + netif_device_detach(dev->netdev); + else { + warn("failed tx_urb %d\n", res); + dev->stats.tx_errors++; + netif_start_queue(netdev); + } } else { dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; @@ -729,16 +779,25 @@ static int rtl8150_open(struct net_device *netdev) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: rx_urb submit failed: %d", __FUNCTION__, res); + return res; + } usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3), dev->intr_buff, INTBUFSIZE, intr_callback, dev, dev->intr_interval); - if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: intr_urb submit failed: %d", __FUNCTION__, res); - netif_start_queue(netdev); + usb_kill_urb(dev->rx_urb); + return res; + } enable_net_traffic(dev); set_carrier(netdev); + netif_start_queue(netdev); return res; } diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index ac33bd4..f5b9438 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -62,15 +62,6 @@ config USB_SERIAL_AIRPRIME To compile this driver as a module, choose M here: the module will be called airprime. -config USB_SERIAL_ANYDATA - tristate "USB AnyData CDMA Wireless Driver" - depends on USB_SERIAL - help - Say Y here if you want to use a AnyData CDMA device. - - To compile this driver as a module, choose M here: the - module will be called anydata. - config USB_SERIAL_ARK3116 tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL @@ -502,15 +493,18 @@ config USB_SERIAL_XIRCOM module will be called keyspan_pda. config USB_SERIAL_OPTION - tristate "USB driver for GSM modems" + tristate "USB driver for GSM and CDMA modems" depends on USB_SERIAL help - Say Y here if you have an "Option" GSM PCMCIA card - (or an OEM version: branded Huawei, Audiovox, or Novatel). + Say Y here if you have a GSM or CDMA modem that's connected to USB. + + This driver also supports several PCMCIA cards which have a + built-in OHCI-USB adapter and an internally-connected GSM modem. + The USB bus on these cards is not accessible externally. - These cards feature a built-in OHCI-USB adapter and an - internally-connected GSM modem. The USB bus is not - accessible externally. + Supported devices include (some of?) those made by: + Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or + Anydata. To compile this driver as a module, choose M here: the module will be called option. diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 35d4acc..8efed2c 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -12,7 +12,6 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o -obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c deleted file mode 100644 index 01843ef..0000000 --- a/drivers/usb/serial/anydata.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * AnyData CDMA Serial USB driver - * - * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -static struct usb_device_id id_table [] = { - { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */ - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* if overridden by the user, then use their value for the size of the - * read and write urbs */ -static int buffer_size; -static int debug; - -static struct usb_driver anydata_driver = { - .name = "anydata", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, - .no_dynamic_id = 1, -}; - -static int anydata_open(struct usb_serial_port *port, struct file *filp) -{ - char *buffer; - int result = 0; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (buffer_size) { - /* override the default buffer sizes */ - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->read_urb->transfer_buffer); - port->read_urb->transfer_buffer = buffer; - port->read_urb->transfer_buffer_length = buffer_size; - - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->write_urb->transfer_buffer); - port->write_urb->transfer_buffer = buffer; - port->write_urb->transfer_buffer_length = buffer_size; - port->bulk_out_size = buffer_size; - } - - /* Start reading from the device */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - usb_serial_generic_read_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __FUNCTION__, result); - - return result; -} - -static struct usb_serial_driver anydata_device = { - .driver = { - .owner = THIS_MODULE, - .name = "anydata", - }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 1, - .open = anydata_open, -}; - -static int __init anydata_init(void) -{ - int retval; - - retval = usb_serial_register(&anydata_device); - if (retval) - return retval; - retval = usb_register(&anydata_driver); - if (retval) - usb_serial_deregister(&anydata_device); - return retval; -} - -static void __exit anydata_exit(void) -{ - usb_deregister(&anydata_driver); - usb_serial_deregister(&anydata_device); -} - -module_init(anydata_init); -module_exit(anydata_exit); -MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(buffer_size, int, 0); -MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers"); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b458aed..a20da85 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -337,6 +337,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 04ef90f..9f7343a 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -182,6 +182,10 @@ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ + +#define FTDI_TNC_X_PID 0xEBE0 + /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 59c5d99..7e1bd5d 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -250,6 +250,7 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0530c1..c856e6f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -9,40 +9,14 @@ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> - History: - - 2005-05-19 v0.1 Initial version, based on incomplete docs - and analysis of misbehavior with the standard driver - 2005-05-20 v0.2 Extended the input buffer to avoid losing - random 64-byte chunks of data - 2005-05-21 v0.3 implemented chars_in_buffer() - turned on low_latency - simplified the code somewhat - 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load - removed some dead code - added sponsor notice - coding style clean-up - 2005-06-20 v0.4.1 add missing braces :-/ - killed end-of-line whitespace - 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2 - 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard - 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes - wants to send >2000 bytes. - 2006-04-10 v0.5 fixed two array overrun errors :-/ - 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755 - 2006-05-15 v0.6 re-enable multi-port support - 2006-06-01 v0.6.1 add COBRA - 2006-06-01 v0.6.2 add backwards-compatibility stuff - 2006-06-01 v0.6.3 add Novatel Wireless - 2006-06-01 v0.7 Option => GSM - 2006-06-01 v0.7.1 add COBRA2 + History: see the git log. Work sponsored by: Sigos GmbH, Germany <info@sigos.de> This driver exists because the "normal" serial driver doesn't work too well with GSM modems. Issues: - data loss -- one single Receive URB is not nearly enough - - nonstandard flow (Option devices) and multiplex (Sierra) control + - nonstandard flow (Option devices) control - controlling the baud rate doesn't make sense This driver is named "option" because the most common device it's @@ -96,8 +70,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_VENDOR_ID 0x0AF0 #define HUAWEI_VENDOR_ID 0x12D1 #define AUDIOVOX_VENDOR_ID 0x0F3D -#define SIERRAWIRELESS_VENDOR_ID 0x1199 #define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define ANYDATA_VENDOR_ID 0x16d5 #define OPTION_PRODUCT_OLD 0x5000 #define OPTION_PRODUCT_FUSION 0x6000 @@ -106,8 +80,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_PRODUCT_COBRA2 0x6600 #define HUAWEI_PRODUCT_E600 0x1001 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 -#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802 #define NOVATELWIRELESS_PRODUCT_U740 0x1400 +#define ANYDATA_PRODUCT_ID 0x6501 static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, @@ -117,8 +91,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -131,10 +105,7 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, - { } /* Terminating entry */ -}; -static struct usb_device_id option_ids3[] = { - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -151,37 +122,11 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, which the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_driver option_3port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "option", - }, - .description = "GSM modem (3-port)", - .id_table = option_ids3, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 3, - .open = option_open, - .close = option_close, - .write = option_write, - .write_room = option_write_room, - .chars_in_buffer = option_chars_in_buffer, - .throttle = option_rx_throttle, - .unthrottle = option_rx_unthrottle, - .set_termios = option_set_termios, - .break_ctl = option_break_ctl, - .tiocmget = option_tiocmget, - .tiocmset = option_tiocmset, - .attach = option_startup, - .shutdown = option_shutdown, - .read_int_callback = option_instat_callback, -}; static struct usb_serial_driver option_1port_device = { .driver = { .owner = THIS_MODULE, - .name = "option", + .name = "option1", }, .description = "GSM modem (1-port)", .id_table = option_ids1, @@ -245,9 +190,6 @@ static int __init option_init(void) retval = usb_serial_register(&option_1port_device); if (retval) goto failed_1port_device_register; - retval = usb_serial_register(&option_3port_device); - if (retval) - goto failed_3port_device_register; retval = usb_register(&option_driver); if (retval) goto failed_driver_register; @@ -257,8 +199,6 @@ static int __init option_init(void) return 0; failed_driver_register: - usb_serial_deregister (&option_3port_device); -failed_3port_device_register: usb_serial_deregister (&option_1port_device); failed_1port_device_register: return retval; @@ -267,7 +207,6 @@ failed_1port_device_register: static void __exit option_exit(void) { usb_deregister (&option_driver); - usb_serial_deregister (&option_3port_device); usb_serial_deregister (&option_1port_device); } @@ -656,7 +595,6 @@ static void option_setup_urbs(struct usb_serial *serial) dbg("%s", __FUNCTION__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 259db31..efbbc0a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -81,6 +81,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, + { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index d9c1e6e..a692ac6 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -89,3 +89,7 @@ /* DATAPILOT Universal-2 Phone Cable */ #define DATAPILOT_U2_VENDOR_ID 0x0731 #define DATAPILOT_U2_PRODUCT_ID 0x2003 + +/* Belkin "F5U257" Serial Adapter */ +#define BELKIN_VENDOR_ID 0x050d +#define BELKIN_PRODUCT_ID 0x0257 diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a5ca449..2793f9a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -145,6 +145,13 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Mario Rettig <mariorettig@web.de> */ +UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, + "Nokia", + "Nokia 3250", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and * Einar Th. Einarsson <einarthered@gmail.com> */ UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, @@ -627,18 +634,6 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Digital Camera EX-20 DSC", US_SC_8070, US_PR_DEVICE, NULL, 0 ), -/* The entry was here before I took over, and had US_SC_RBC. It turns - * out that isn't needed. Additionally, Torsten Eriksson - * <Torsten.Eriksson@bergianska.se> is able to use his device fine - * without this entry at all - but I don't suspect that will be true - * for all users (the protocol is likely needed), so is staying at - * this time. - Phil Dibowitz <phil@ipom.com> - */ -UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200, - "LaCie", - "USB Hard Disk", - US_SC_DEVICE, US_PR_CB, NULL, 0 ), - /* Submitted by Joel Bourquard <numlock@freesurf.ch> * Some versions of this device need the SubClass and Protocol overrides * while others don't. @@ -1106,7 +1101,15 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, "Optio S/S4", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), - + +/* This is a virtual windows driver CD, which the zd1211rw driver automatically + * converts into a WLAN device. */ +UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, + "ZyXEL", + "G-220F USB-WLAN Install", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5ee19be..8d7bdcb 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -483,7 +483,7 @@ static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) } /* Get the unusual_devs entries and the string descriptors */ -static void get_device_info(struct us_data *us, const struct usb_device_id *id) +static int get_device_info(struct us_data *us, const struct usb_device_id *id) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = @@ -500,6 +500,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) unusual_dev->useTransport; us->flags = USB_US_ORIG_FLAGS(id->driver_info); + if (us->flags & US_FL_IGNORE_DEVICE) { + printk(KERN_INFO USB_STORAGE "device ignored\n"); + return -ENODEV; + } + /* * This flag is only needed when we're in high-speed, so let's * disable it if we're in full-speed @@ -541,6 +546,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) msgs[msg], UTS_RELEASE); } + + return 0; } /* Get the transport settings */ @@ -969,7 +976,9 @@ static int storage_probe(struct usb_interface *intf, * of the match from the usb_device_id table, so we can find the * corresponding entry in the private table. */ - get_device_info(us, id); + result = get_device_info(us, id); + if (result) + goto BadDevice; /* Get the transport, protocol, and pipe settings */ result = get_transport(us); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6533b0f..c40b9b8 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -86,9 +86,11 @@ config FB_MACMODES default n config FB_BACKLIGHT - bool - depends on FB - default n + bool + depends on FB + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + default n config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" @@ -420,7 +422,7 @@ config FB_OF config FB_CONTROL bool "Apple \"control\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -431,7 +433,7 @@ config FB_CONTROL config FB_PLATINUM bool "Apple \"platinum\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -442,7 +444,7 @@ config FB_PLATINUM config FB_VALKYRIE bool "Apple \"valkyrie\" display support" - depends on (FB = y) && (MAC || PPC_PMAC) + depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -453,7 +455,7 @@ config FB_VALKYRIE config FB_CT65550 bool "Chips 65550 display support" - depends on (FB = y) && PPC + depends on (FB = y) && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -721,10 +723,8 @@ config FB_NVIDIA_I2C config FB_NVIDIA_BACKLIGHT bool "Support for backlight control" - depends on FB_NVIDIA && PPC_PMAC + depends on FB_NVIDIA && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -769,10 +769,8 @@ config FB_RIVA_DEBUG config FB_RIVA_BACKLIGHT bool "Support for backlight control" - depends on FB_RIVA && PPC_PMAC + depends on FB_RIVA && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -1025,10 +1023,8 @@ config FB_RADEON_I2C config FB_RADEON_BACKLIGHT bool "Support for backlight control" - depends on FB_RADEON && PPC_PMAC + depends on FB_RADEON && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -1059,10 +1055,8 @@ config FB_ATY128 config FB_ATY128_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY128 && PPC_PMAC + depends on FB_ATY128 && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -1111,10 +1105,8 @@ config FB_ATY_GX config FB_ATY_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY && PPC_PMAC + depends on FB_ATY && PMAC_BACKLIGHT select FB_BACKLIGHT - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE default y help Say Y here if you want to control the backlight of your display. @@ -1620,7 +1612,7 @@ if FB || SGI_NEWPORT_CONSOLE source "drivers/video/logo/Kconfig" endif -if FB && SYSFS +if SYSFS source "drivers/video/backlight/Kconfig" endif diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 95563c9..481c6c9 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -4,6 +4,7 @@ # Each configuration option enables a list of files. +obj-y += fb_notify.o obj-$(CONFIG_FB) += fb.o fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \ modedb.o fbcvt.o diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index c64a717..8b08121 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -455,7 +455,10 @@ static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_idle(struct aty128fb_par *par); static u32 depth_to_dst(u32 depth); + +#ifdef CONFIG_FB_ATY128_BACKLIGHT static void aty128_bl_set_power(struct fb_info *info, int power); +#endif #define BIOS_IN8(v) (readb(bios + (v))) #define BIOS_IN16(v) (readb(bios + (v)) | \ diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 1507d19..053ff63 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2812,7 +2812,7 @@ static int atyfb_blank(int blank, struct fb_info *info) if (par->lock_blank || par->asleep) return 0; -#ifdef CONFIG_PMAC_BACKLIGHT +#ifdef CONFIG_FB_ATY_BACKLIGHT if (machine_is(powermac) && blank > FB_BLANK_NORMAL) aty_bl_set_power(info, FB_BLANK_POWERDOWN); #elif defined(CONFIG_FB_ATY_GENERIC_LCD) @@ -2844,7 +2844,7 @@ static int atyfb_blank(int blank, struct fb_info *info) } aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par); -#ifdef CONFIG_PMAC_BACKLIGHT +#ifdef CONFIG_FB_ATY_BACKLIGHT if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) aty_bl_set_power(info, FB_BLANK_UNBLANK); #elif defined(CONFIG_FB_ATY_GENERIC_LCD) diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 8d85fc5..8e3400d 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -266,6 +266,8 @@ static int force_measure_pll = 0; #ifdef CONFIG_MTRR static int nomtrr = 0; #endif +static int force_sleep; +static int ignore_devlist; /* * prototypes @@ -2327,9 +2329,9 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev, /* -2 is special: means ON on mobility chips and do not * change on others */ - radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1); + radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1, ignore_devlist, force_sleep); } else - radeonfb_pm_init(rinfo, default_dynclk); + radeonfb_pm_init(rinfo, default_dynclk, ignore_devlist, force_sleep); pci_set_drvdata(pdev, info); @@ -2477,6 +2479,12 @@ static int __init radeonfb_setup (char *options) force_measure_pll = 1; } else if (!strncmp(this_opt, "ignore_edid", 11)) { ignore_edid = 1; +#if defined(CONFIG_PM) && defined(CONFIG_X86) + } else if (!strncmp(this_opt, "force_sleep", 11)) { + force_sleep = 1; + } else if (!strncmp(this_opt, "ignore_devlist", 14)) { + ignore_devlist = 1; +#endif } else mode_option = this_opt; } @@ -2532,3 +2540,9 @@ module_param(panel_yres, int, 0); MODULE_PARM_DESC(panel_yres, "int: set panel yres"); module_param(mode_option, charp, 0); MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); +#if defined(CONFIG_PM) && defined(CONFIG_X86) +module_param(force_sleep, bool, 0); +MODULE_PARM_DESC(force_sleep, "bool: force D2 sleep mode on all hardware"); +module_param(ignore_devlist, bool, 0); +MODULE_PARM_DESC(ignore_devlist, "bool: ignore workarounds for bugs in specific laptops"); +#endif diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index c709176..f31e606 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -27,6 +27,99 @@ #include "ati_ids.h" +static void radeon_reinitialize_M10(struct radeonfb_info *rinfo); + +/* + * Workarounds for bugs in PC laptops: + * - enable D2 sleep in some IBM Thinkpads + * - special case for Samsung P35 + * + * Whitelist by subsystem vendor/device because + * its the subsystem vendor's fault! + */ + +#if defined(CONFIG_PM) && defined(CONFIG_X86) +struct radeon_device_id { + const char *ident; /* (arbitrary) Name */ + const unsigned short subsystem_vendor; /* Subsystem Vendor ID */ + const unsigned short subsystem_device; /* Subsystem Device ID */ + const enum radeon_pm_mode pm_mode_modifier; /* modify pm_mode */ + const reinit_function_ptr new_reinit_func; /* changed reinit_func */ +}; + +#define BUGFIX(model, sv, sd, pm, fn) { \ + .ident = model, \ + .subsystem_vendor = sv, \ + .subsystem_device = sd, \ + .pm_mode_modifier = pm, \ + .new_reinit_func = fn \ +} + +static struct radeon_device_id radeon_workaround_list[] = { + BUGFIX("IBM Thinkpad R32", + PCI_VENDOR_ID_IBM, 0x1905, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad R40", + PCI_VENDOR_ID_IBM, 0x0526, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad R40", + PCI_VENDOR_ID_IBM, 0x0527, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad R50/R51/T40/T41", + PCI_VENDOR_ID_IBM, 0x0531, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad R51/T40/T41/T42", + PCI_VENDOR_ID_IBM, 0x0530, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad T30", + PCI_VENDOR_ID_IBM, 0x0517, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad T40p", + PCI_VENDOR_ID_IBM, 0x054d, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad T42", + PCI_VENDOR_ID_IBM, 0x0550, + radeon_pm_d2, NULL), + BUGFIX("IBM Thinkpad X31/X32", + PCI_VENDOR_ID_IBM, 0x052f, + radeon_pm_d2, NULL), + BUGFIX("Samsung P35", + PCI_VENDOR_ID_SAMSUNG, 0xc00c, + radeon_pm_off, radeon_reinitialize_M10), + { .ident = NULL } +}; + +static int radeon_apply_workarounds(struct radeonfb_info *rinfo) +{ + struct radeon_device_id *id; + + for (id = radeon_workaround_list; id->ident != NULL; id++ ) + if ((id->subsystem_vendor == rinfo->pdev->subsystem_vendor ) && + (id->subsystem_device == rinfo->pdev->subsystem_device )) { + + /* we found a device that requires workaround */ + printk(KERN_DEBUG "radeonfb: %s detected" + ", enabling workaround\n", id->ident); + + rinfo->pm_mode |= id->pm_mode_modifier; + + if (id->new_reinit_func != NULL) + rinfo->reinit_func = id->new_reinit_func; + + return 1; + } + return 0; /* not found */ +} + +#else /* defined(CONFIG_PM) && defined(CONFIG_X86) */ +static inline int radeon_apply_workarounds(struct radeonfb_info *rinfo) +{ + return 0; +} +#endif /* defined(CONFIG_PM) && defined(CONFIG_X86) */ + + + static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo) { u32 tmp; @@ -852,18 +945,26 @@ static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo) /* because both INPLL and OUTPLL take the same lock, that's why. */ tmp = INPLL( pllMCLK_MISC) | MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND; OUTPLL( pllMCLK_MISC, tmp); - - /* AGP PLL control */ - if (rinfo->family <= CHIP_FAMILY_RV280) { - OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | BUS_CNTL1__AGPCLK_VALID); - OUTREG(BUS_CNTL1, - (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK) - | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT)); // 440BX - } else { - OUTREG(BUS_CNTL1, INREG(BUS_CNTL1)); - OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000); + /* BUS_CNTL1__MOBILE_PLATORM_SEL setting is northbridge chipset + * and radeon chip dependent. Thus we only enable it on Mac for + * now (until we get more info on how to compute the correct + * value for various X86 bridges). + */ +#ifdef CONFIG_PPC_PMAC + if (machine_is(powermac)) { + /* AGP PLL control */ + if (rinfo->family <= CHIP_FAMILY_RV280) { + OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | BUS_CNTL1__AGPCLK_VALID); + OUTREG(BUS_CNTL1, + (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK) + | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT)); // 440BX + } else { + OUTREG(BUS_CNTL1, INREG(BUS_CNTL1)); + OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000); + } } +#endif OUTREG(CRTC_OFFSET_CNTL, (INREG(CRTC_OFFSET_CNTL) & ~CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN)); @@ -2713,7 +2814,7 @@ static void radeonfb_early_resume(void *data) #endif /* CONFIG_PM */ -void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) +void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep) { /* Find PM registers in config space if any*/ rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM); @@ -2729,22 +2830,13 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) } #if defined(CONFIG_PM) +#if defined(CONFIG_PPC_PMAC) /* Check if we can power manage on suspend/resume. We can do * D2 on M6, M7 and M9, and we can resume from D3 cold a few other * "Mac" cards, but that's all. We need more infos about what the * BIOS does tho. Right now, all this PM stuff is pmac-only for that * reason. --BenH */ - /* Special case for Samsung P35 laptops - */ - if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) && - (rinfo->pdev->device == PCI_CHIP_RV350_NP) && - (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) && - (rinfo->pdev->subsystem_device == 0xc00c)) { - rinfo->reinit_func = radeon_reinitialize_M10; - rinfo->pm_mode |= radeon_pm_off; - } -#if defined(CONFIG_PPC_PMAC) if (machine_is(powermac) && rinfo->of_node) { if (rinfo->is_mobility && rinfo->pm_reg && rinfo->family <= CHIP_FAMILY_RV250) @@ -2790,6 +2882,18 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) } #endif /* defined(CONFIG_PPC_PMAC) */ #endif /* defined(CONFIG_PM) */ + + if (ignore_devlist) + printk(KERN_DEBUG + "radeonfb: skipping test for device workarounds\n"); + else + radeon_apply_workarounds(rinfo); + + if (force_sleep) { + printk(KERN_DEBUG + "radeonfb: forcefully enabling D2 sleep mode\n"); + rinfo->pm_mode |= radeon_pm_d2; + } } void radeonfb_pm_exit(struct radeonfb_info *rinfo) diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index 38657b2..d5ff224 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -273,6 +273,8 @@ enum radeon_pm_mode { radeon_pm_off = 0x00000002, /* Can resume from D3 cold */ }; +typedef void (*reinit_function_ptr)(struct radeonfb_info *rinfo); + struct radeonfb_info { struct fb_info *info; @@ -338,7 +340,7 @@ struct radeonfb_info { int dynclk; int no_schedule; enum radeon_pm_mode pm_mode; - void (*reinit_func)(struct radeonfb_info *rinfo); + reinit_function_ptr reinit_func; /* Lock on register access */ spinlock_t reg_lock; @@ -600,7 +602,7 @@ extern int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn, u8 /* PM Functions */ extern int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state); extern int radeonfb_pci_resume(struct pci_dev *pdev); -extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk); +extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep); extern void radeonfb_pm_exit(struct radeonfb_info *rinfo); /* Monitor probe functions */ diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 022f9d3..02f1529 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -10,7 +10,7 @@ menuconfig BACKLIGHT_LCD_SUPPORT config BACKLIGHT_CLASS_DEVICE tristate "Lowlevel Backlight controls" - depends on BACKLIGHT_LCD_SUPPORT && FB + depends on BACKLIGHT_LCD_SUPPORT default m help This framework adds support for low-level control of the LCD @@ -26,7 +26,7 @@ config BACKLIGHT_DEVICE config LCD_CLASS_DEVICE tristate "Lowlevel LCD controls" - depends on BACKLIGHT_LCD_SUPPORT && FB + depends on BACKLIGHT_LCD_SUPPORT default m help This framework adds support for low-level control of LCD. diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c index 52ed12b..eb4d03f 100644 --- a/drivers/video/console/mdacon.c +++ b/drivers/video/console/mdacon.c @@ -197,7 +197,7 @@ static int __init mdacon_setup(char *str) __setup("mdacon=", mdacon_setup); #endif -static int __init mda_detect(void) +static int mda_detect(void) { int count=0; u16 *p, p_save; @@ -282,7 +282,7 @@ static int __init mda_detect(void) return 1; } -static void __init mda_initialize(void) +static void mda_initialize(void) { write_mda_b(97, 0x00); /* horizontal total */ write_mda_b(80, 0x01); /* horizontal displayed */ diff --git a/drivers/video/fb_notify.c b/drivers/video/fb_notify.c new file mode 100644 index 0000000..8c02038 --- /dev/null +++ b/drivers/video/fb_notify.c @@ -0,0 +1,46 @@ +/* + * linux/drivers/video/fb_notify.c + * + * Copyright (C) 2006 Antonino Daplas <adaplas@pol.net> + * + * 2001 - Documented with DocBook + * - Brad Douglas <brad@neruo.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ +#include <linux/fb.h> +#include <linux/notifier.h> + +static BLOCKING_NOTIFIER_HEAD(fb_notifier_list); + +/** + * fb_register_client - register a client notifier + * @nb: notifier block to callback on events + */ +int fb_register_client(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&fb_notifier_list, nb); +} +EXPORT_SYMBOL(fb_register_client); + +/** + * fb_unregister_client - unregister a client notifier + * @nb: notifier block to callback on events + */ +int fb_unregister_client(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&fb_notifier_list, nb); +} +EXPORT_SYMBOL(fb_unregister_client); + +/** + * fb_notifier_call_chain - notify clients of fb_events + * + */ +int fb_notifier_call_chain(unsigned long val, void *v) +{ + return blocking_notifier_call_chain(&fb_notifier_list, val, v); +} +EXPORT_SYMBOL_GPL(fb_notifier_call_chain); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 4fc9df4..17961e3 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -52,7 +52,6 @@ #define FBPIXMAPSIZE (1024 * 8) -static BLOCKING_NOTIFIER_HEAD(fb_notifier_list); struct fb_info *registered_fb[FB_MAX]; int num_registered_fb; @@ -791,8 +790,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) event.info = info; event.data = &mode1; - ret = blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_MODE_DELETE, &event); + ret = fb_notifier_call_chain(FB_EVENT_MODE_DELETE, &event); } if (!ret) @@ -837,8 +835,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) info->flags &= ~FBINFO_MISC_USEREVENT; event.info = info; - blocking_notifier_call_chain(&fb_notifier_list, - evnt, &event); + fb_notifier_call_chain(evnt, &event); } } } @@ -861,8 +858,7 @@ fb_blank(struct fb_info *info, int blank) event.info = info; event.data = ␣ - blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_BLANK, &event); + fb_notifier_call_chain(FB_EVENT_BLANK, &event); } return ret; @@ -933,8 +929,7 @@ fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, con2fb.framebuffer = -1; event.info = info; event.data = &con2fb; - blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_GET_CONSOLE_MAP, &event); + fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event); return copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0; case FBIOPUT_CON2FBMAP: @@ -952,9 +947,8 @@ fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return -EINVAL; event.info = info; event.data = &con2fb; - return blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_SET_CONSOLE_MAP, - &event); + return fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, + &event); case FBIOBLANK: acquire_console_sem(); info->flags |= FBINFO_MISC_USEREVENT; @@ -1330,8 +1324,7 @@ register_framebuffer(struct fb_info *fb_info) registered_fb[i] = fb_info; event.info = fb_info; - blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_FB_REGISTERED, &event); + fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event); return 0; } @@ -1365,30 +1358,11 @@ unregister_framebuffer(struct fb_info *fb_info) fb_cleanup_class_device(fb_info); class_device_destroy(fb_class, MKDEV(FB_MAJOR, i)); event.info = fb_info; - blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_FB_UNREGISTERED, &event); + fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event); return 0; } /** - * fb_register_client - register a client notifier - * @nb: notifier block to callback on events - */ -int fb_register_client(struct notifier_block *nb) -{ - return blocking_notifier_chain_register(&fb_notifier_list, nb); -} - -/** - * fb_unregister_client - unregister a client notifier - * @nb: notifier block to callback on events - */ -int fb_unregister_client(struct notifier_block *nb) -{ - return blocking_notifier_chain_unregister(&fb_notifier_list, nb); -} - -/** * fb_set_suspend - low level driver signals suspend * @info: framebuffer affected * @state: 0 = resuming, !=0 = suspending @@ -1403,13 +1377,11 @@ void fb_set_suspend(struct fb_info *info, int state) event.info = info; if (state) { - blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_SUSPEND, &event); + fb_notifier_call_chain(FB_EVENT_SUSPEND, &event); info->state = FBINFO_STATE_SUSPENDED; } else { info->state = FBINFO_STATE_RUNNING; - blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_RESUME, &event); + fb_notifier_call_chain(FB_EVENT_RESUME, &event); } } @@ -1480,9 +1452,7 @@ int fb_new_modelist(struct fb_info *info) if (!list_empty(&info->modelist)) { event.info = info; - err = blocking_notifier_call_chain(&fb_notifier_list, - FB_EVENT_NEW_MODELIST, - &event); + err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event); } return err; @@ -1594,8 +1564,6 @@ EXPORT_SYMBOL(fb_blank); EXPORT_SYMBOL(fb_pan_display); EXPORT_SYMBOL(fb_get_buffer_offset); EXPORT_SYMBOL(fb_set_suspend); -EXPORT_SYMBOL(fb_register_client); -EXPORT_SYMBOL(fb_unregister_client); EXPORT_SYMBOL(fb_get_options); MODULE_LICENSE("GPL"); diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index 9f2066f..d4f8501 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -34,10 +34,6 @@ #include "nv_proto.h" #include "nv_dma.h" -#ifndef CONFIG_PCI /* sanity check */ -#error This driver requires PCI support. -#endif - #undef CONFIG_FB_NVIDIA_DEBUG #ifdef CONFIG_FB_NVIDIA_DEBUG #define NVTRACE printk @@ -1303,20 +1299,19 @@ static int __devinit nvidiafb_probe(struct pci_dev *pd, nvidia_save_vga(par, &par->SavedReg); + pci_set_drvdata(pd, info); + nvidia_bl_init(par); if (register_framebuffer(info) < 0) { printk(KERN_ERR PFX "error registering nVidia framebuffer\n"); goto err_out_iounmap_fb; } - pci_set_drvdata(pd, info); printk(KERN_INFO PFX "PCI nVidia %s framebuffer (%dMB @ 0x%lX)\n", info->fix.id, par->FbMapSize / (1024 * 1024), info->fix.smem_start); - nvidia_bl_init(par); - NVTRACE_LEAVE(); return 0; diff --git a/drivers/video/offb.c b/drivers/video/offb.c index ce5f303..0013311 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -62,8 +62,6 @@ struct offb_par default_par; * Interface used by the world */ -int offb_init(void); - static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info); static int offb_blank(int blank, struct fb_info *info); @@ -72,11 +70,6 @@ static int offb_blank(int blank, struct fb_info *info); extern boot_infos_t *boot_infos; #endif -static void offb_init_nodriver(struct device_node *); -static void offb_init_fb(const char *name, const char *full_name, - int width, int height, int depth, int pitch, - unsigned long address, struct device_node *dp); - static struct fb_ops offb_ops = { .owner = THIS_MODULE, .fb_setcolreg = offb_setcolreg, @@ -229,123 +222,17 @@ static int offb_blank(int blank, struct fb_info *info) return 0; } - /* - * Initialisation - */ -int __init offb_init(void) +static void __iomem *offb_map_reg(struct device_node *np, int index, + unsigned long offset, unsigned long size) { - struct device_node *dp = NULL, *boot_disp = NULL; - - if (fb_get_options("offb", NULL)) - return -ENODEV; + struct resource r; - for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { - if (get_property(dp, "linux,opened", NULL) && - get_property(dp, "linux,boot-display", NULL)) { - boot_disp = dp; - offb_init_nodriver(dp); - } - } - for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { - if (get_property(dp, "linux,opened", NULL) && - dp != boot_disp) - offb_init_nodriver(dp); - } - - return 0; -} - - -static void __init offb_init_nodriver(struct device_node *dp) -{ - unsigned int len; - int i, width = 640, height = 480, depth = 8, pitch = 640; - unsigned int flags, rsize, addr_prop = 0; - unsigned long max_size = 0; - u64 rstart, address = OF_BAD_ADDR; - u32 *pp, *addrp, *up; - u64 asize; - - pp = (u32 *)get_property(dp, "linux,bootx-depth", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "depth", &len); - if (pp && len == sizeof(u32)) - depth = *pp; - - pp = (u32 *)get_property(dp, "linux,bootx-width", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "width", &len); - if (pp && len == sizeof(u32)) - width = *pp; - - pp = (u32 *)get_property(dp, "linux,bootx-height", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "height", &len); - if (pp && len == sizeof(u32)) - height = *pp; - - pp = (u32 *)get_property(dp, "linux,bootx-linebytes", &len); - if (pp == NULL) - pp = (u32 *)get_property(dp, "linebytes", &len); - if (pp && len == sizeof(u32)) - pitch = *pp; - else - pitch = width * ((depth + 7) / 8); - - rsize = (unsigned long)pitch * (unsigned long)height; - - /* Ok, now we try to figure out the address of the framebuffer. - * - * Unfortunately, Open Firmware doesn't provide a standard way to do - * so. All we can do is a dodgy heuristic that happens to work in - * practice. On most machines, the "address" property contains what - * we need, though not on Matrox cards found in IBM machines. What I've - * found that appears to give good results is to go through the PCI - * ranges and pick one that is both big enough and if possible encloses - * the "address" property. If none match, we pick the biggest - */ - up = (u32 *)get_property(dp, "linux,bootx-addr", &len); - if (up == NULL) - up = (u32 *)get_property(dp, "address", &len); - if (up && len == sizeof(u32)) - addr_prop = *up; - - for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags)) - != NULL; i++) { - int match_addrp = 0; - - if (!(flags & IORESOURCE_MEM)) - continue; - if (asize < rsize) - continue; - rstart = of_translate_address(dp, addrp); - if (rstart == OF_BAD_ADDR) - continue; - if (addr_prop && (rstart <= addr_prop) && - ((rstart + asize) >= (addr_prop + rsize))) - match_addrp = 1; - if (match_addrp) { - address = addr_prop; - break; - } - if (rsize > max_size) { - max_size = rsize; - address = OF_BAD_ADDR; - } - - if (address == OF_BAD_ADDR) - address = rstart; - } - if (address == OF_BAD_ADDR && addr_prop) - address = (u64)addr_prop; - if (address != OF_BAD_ADDR) { - /* kludge for valkyrie */ - if (strcmp(dp->name, "valkyrie") == 0) - address += 0x1000; - offb_init_fb(dp->name, dp->full_name, width, height, depth, - pitch, address, dp); - } + if (of_address_to_resource(np, index, &r)) + return 0; + if ((r.start + offset + size) > r.end) + return 0; + return ioremap(r.start + offset, size); } static void __init offb_init_fb(const char *name, const char *full_name, @@ -402,45 +289,39 @@ static void __init offb_init_fb(const char *name, const char *full_name, par->cmap_type = cmap_unknown; if (depth == 8) { - /* Palette hacks disabled for now */ -#if 0 if (dp && !strncmp(name, "ATY,Rage128", 11)) { - unsigned long regbase = dp->addrs[2].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_r128; + par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_r128; } else if (dp && (!strncmp(name, "ATY,RageM3pA", 12) || !strncmp(name, "ATY,RageM3p12A", 14))) { - unsigned long regbase = - dp->parent->addrs[2].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_M3A; + par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_M3A; } else if (dp && !strncmp(name, "ATY,RageM3pB", 12)) { - unsigned long regbase = - dp->parent->addrs[2].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_M3B; + par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_M3B; } else if (dp && !strncmp(name, "ATY,Rage6", 9)) { - unsigned long regbase = dp->addrs[1].address; - par->cmap_adr = ioremap(regbase, 0x1FFF); - par->cmap_type = cmap_radeon; + par->cmap_adr = offb_map_reg(dp, 1, 0, 0x1fff); + if (par->cmap_adr) + par->cmap_type = cmap_radeon; } else if (!strncmp(name, "ATY,", 4)) { unsigned long base = address & 0xff000000UL; par->cmap_adr = ioremap(base + 0x7ff000, 0x1000) + 0xcc0; par->cmap_data = par->cmap_adr + 1; par->cmap_type = cmap_m64; - } else if (device_is_compatible(dp, "pci1014,b7")) { - unsigned long regbase = dp->addrs[0].address; - par->cmap_adr = ioremap(regbase + 0x6000, 0x1000); - par->cmap_type = cmap_gxt2000; + } else if (dp && device_is_compatible(dp, "pci1014,b7")) { + par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000); + if (par->cmap_adr) + par->cmap_type = cmap_gxt2000; } -#endif - fix->visual = par->cmap_adr ? FB_VISUAL_PSEUDOCOLOR - : FB_VISUAL_STATIC_PSEUDOCOLOR; + fix->visual = (par->cmap_type != cmap_unknown) ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_STATIC_PSEUDOCOLOR; } else - fix->visual = /* par->cmap_adr ? FB_VISUAL_DIRECTCOLOR - : */ FB_VISUAL_TRUECOLOR; + fix->visual = FB_VISUAL_TRUECOLOR; var->xoffset = var->yoffset = 0; switch (depth) { @@ -520,5 +401,139 @@ static void __init offb_init_fb(const char *name, const char *full_name, info->node, full_name); } + +static void __init offb_init_nodriver(struct device_node *dp, int no_real_node) +{ + unsigned int len; + int i, width = 640, height = 480, depth = 8, pitch = 640; + unsigned int flags, rsize, addr_prop = 0; + unsigned long max_size = 0; + u64 rstart, address = OF_BAD_ADDR; + u32 *pp, *addrp, *up; + u64 asize; + + pp = (u32 *)get_property(dp, "linux,bootx-depth", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "depth", &len); + if (pp && len == sizeof(u32)) + depth = *pp; + + pp = (u32 *)get_property(dp, "linux,bootx-width", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "width", &len); + if (pp && len == sizeof(u32)) + width = *pp; + + pp = (u32 *)get_property(dp, "linux,bootx-height", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "height", &len); + if (pp && len == sizeof(u32)) + height = *pp; + + pp = (u32 *)get_property(dp, "linux,bootx-linebytes", &len); + if (pp == NULL) + pp = (u32 *)get_property(dp, "linebytes", &len); + if (pp && len == sizeof(u32)) + pitch = *pp; + else + pitch = width * ((depth + 7) / 8); + + rsize = (unsigned long)pitch * (unsigned long)height; + + /* Ok, now we try to figure out the address of the framebuffer. + * + * Unfortunately, Open Firmware doesn't provide a standard way to do + * so. All we can do is a dodgy heuristic that happens to work in + * practice. On most machines, the "address" property contains what + * we need, though not on Matrox cards found in IBM machines. What I've + * found that appears to give good results is to go through the PCI + * ranges and pick one that is both big enough and if possible encloses + * the "address" property. If none match, we pick the biggest + */ + up = (u32 *)get_property(dp, "linux,bootx-addr", &len); + if (up == NULL) + up = (u32 *)get_property(dp, "address", &len); + if (up && len == sizeof(u32)) + addr_prop = *up; + + /* Hack for when BootX is passing us */ + if (no_real_node) + goto skip_addr; + + for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags)) + != NULL; i++) { + int match_addrp = 0; + + if (!(flags & IORESOURCE_MEM)) + continue; + if (asize < rsize) + continue; + rstart = of_translate_address(dp, addrp); + if (rstart == OF_BAD_ADDR) + continue; + if (addr_prop && (rstart <= addr_prop) && + ((rstart + asize) >= (addr_prop + rsize))) + match_addrp = 1; + if (match_addrp) { + address = addr_prop; + break; + } + if (rsize > max_size) { + max_size = rsize; + address = OF_BAD_ADDR; + } + + if (address == OF_BAD_ADDR) + address = rstart; + } + skip_addr: + if (address == OF_BAD_ADDR && addr_prop) + address = (u64)addr_prop; + if (address != OF_BAD_ADDR) { + /* kludge for valkyrie */ + if (strcmp(dp->name, "valkyrie") == 0) + address += 0x1000; + offb_init_fb(no_real_node ? "bootx" : dp->name, + no_real_node ? "display" : dp->full_name, + width, height, depth, pitch, address, + no_real_node ? dp : NULL); + } +} + +static int __init offb_init(void) +{ + struct device_node *dp = NULL, *boot_disp = NULL; + + if (fb_get_options("offb", NULL)) + return -ENODEV; + + /* Check if we have a MacOS display without a node spec */ + if (get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) { + /* The old code tried to work out which node was the MacOS + * display based on the address. I'm dropping that since the + * lack of a node spec only happens with old BootX versions + * (users can update) and with this code, they'll still get + * a display (just not the palette hacks). + */ + offb_init_nodriver(of_chosen, 1); + } + + for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { + if (get_property(dp, "linux,opened", NULL) && + get_property(dp, "linux,boot-display", NULL)) { + boot_disp = dp; + offb_init_nodriver(dp, 0); + } + } + for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { + if (get_property(dp, "linux,opened", NULL) && + dp != boot_disp) + offb_init_nodriver(dp, 0); + } + + return 0; +} + + module_init(offb_init); MODULE_LICENSE("GPL"); diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c index 33dddba..76fc9d3 100644 --- a/drivers/video/riva/fbdev.c +++ b/drivers/video/riva/fbdev.c @@ -2132,6 +2132,9 @@ static int __devinit rivafb_probe(struct pci_dev *pd, fb_destroy_modedb(info->monspecs.modedb); info->monspecs.modedb = NULL; + + pci_set_drvdata(pd, info); + riva_bl_init(info->par); ret = register_framebuffer(info); if (ret < 0) { printk(KERN_ERR PFX @@ -2139,8 +2142,6 @@ static int __devinit rivafb_probe(struct pci_dev *pd, goto err_iounmap_screen_base; } - pci_set_drvdata(pd, info); - printk(KERN_INFO PFX "PCI nVidia %s framebuffer ver %s (%dMB @ 0x%lX)\n", info->fix.id, @@ -2148,8 +2149,6 @@ static int __devinit rivafb_probe(struct pci_dev *pd, info->fix.smem_len / (1024 * 1024), info->fix.smem_start); - riva_bl_init(info->par); - NVTRACE_LEAVE(); return 0; |