summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/cciss.c2
-rw-r--r--drivers/block/drbd/drbd_receiver.c2
-rw-r--r--drivers/block/nbd.c2
-rw-r--r--drivers/char/synclink_gt.c2
-rw-r--r--drivers/crypto/amcc/crypto4xx_reg_def.h2
-rw-r--r--drivers/dma/at_hdmac.c2
-rw-r--r--drivers/dma/fsldma.c2
-rw-r--r--drivers/gpu/drm/drm_edid.c7
-rw-r--r--drivers/gpu/drm/i915/intel_sdvo.c4
-rw-r--r--drivers/gpu/drm/i915/intel_tv.c2
-rw-r--r--drivers/gpu/drm/savage/savage_bci.c2
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_resource.c2
-rw-r--r--drivers/ide/ide-gd.c2
-rw-r--r--drivers/infiniband/hw/cxgb3/iwch_qp.c4
-rw-r--r--drivers/infiniband/hw/cxgb4/qp.c4
-rw-r--r--drivers/infiniband/hw/ehca/hcp_if.h2
-rw-r--r--drivers/infiniband/hw/ipath/ipath_file_ops.c2
-rw-r--r--drivers/input/misc/ad714x.c2
-rw-r--r--drivers/isdn/hardware/mISDN/avmfritz.c2
-rw-r--r--drivers/isdn/hardware/mISDN/hfcmulti.c4
-rw-r--r--drivers/isdn/hardware/mISDN/hfcpci.c2
-rw-r--r--drivers/isdn/hardware/mISDN/mISDNinfineon.c2
-rw-r--r--drivers/isdn/hardware/mISDN/speedfax.c2
-rw-r--r--drivers/isdn/hardware/mISDN/w6692.c2
-rw-r--r--drivers/isdn/hisax/callc.c2
-rw-r--r--drivers/isdn/hisax/tei.c2
-rw-r--r--drivers/isdn/mISDN/tei.c2
-rw-r--r--drivers/media/dvb/siano/smscoreapi.c2
-rw-r--r--drivers/media/video/gspca/sunplus.c4
-rw-r--r--drivers/media/video/usbvideo/vicam.c2
-rw-r--r--drivers/media/video/v4l2-compat-ioctl32.c2
-rw-r--r--drivers/media/video/zoran/zoran.h2
-rw-r--r--drivers/media/video/zoran/zoran_device.c2
-rw-r--r--drivers/media/video/zoran/zr36050.c2
-rw-r--r--drivers/media/video/zoran/zr36060.c2
-rw-r--r--drivers/message/fusion/mptbase.c4
-rw-r--r--drivers/mtd/nand/denali.c2
-rw-r--r--drivers/net/3c527.c4
-rw-r--r--drivers/net/appletalk/ipddp.c2
-rw-r--r--drivers/net/benet/be_hw.h2
-rw-r--r--drivers/net/gianfar.c2
-rw-r--r--drivers/net/hp100.c2
-rw-r--r--drivers/net/ibm_newemac/core.c2
-rw-r--r--drivers/net/ksz884x.c2
-rw-r--r--drivers/net/ll_temac_main.c2
-rw-r--r--drivers/net/sh_eth.c2
-rw-r--r--drivers/net/tulip/dmfe.c20
-rw-r--r--drivers/net/wimax/i2400m/control.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_ap.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_hw.c2
-rw-r--r--drivers/parisc/ccio-dma.c4
-rw-r--r--drivers/pcmcia/sa11xx_base.c2
-rw-r--r--drivers/rapidio/rio.c2
-rw-r--r--drivers/rtc/rtc-fm3130.c2
-rw-r--r--drivers/rtc/rtc-rx8025.c2
-rw-r--r--drivers/scsi/advansys.c2
-rw-r--r--drivers/scsi/aic7xxx_old/aic7xxx.seq2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_seq.c4
-rw-r--r--drivers/scsi/bfa/bfa_core.c2
-rw-r--r--drivers/scsi/bfa/bfa_fcs.c10
-rw-r--r--drivers/scsi/bfa/bfa_ioim.c2
-rw-r--r--drivers/scsi/bfa/vport.c2
-rw-r--r--drivers/scsi/fcoe/fcoe.c4
-rw-r--r--drivers/scsi/libfc/fc_exch.c4
-rw-r--r--drivers/scsi/libfc/fc_lport.c6
-rw-r--r--drivers/scsi/libfc/fc_rport.c2
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.h2
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c4
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c4
-rw-r--r--drivers/scsi/qla2xxx/qla_iocb.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.h2
-rw-r--r--drivers/scsi/qla4xxx/ql4_init.c2
-rw-r--r--drivers/scsi/scsi_transport_fc.c2
-rw-r--r--drivers/serial/68360serial.c6
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/nwpserial.c2
-rw-r--r--drivers/serial/sn_console.c6
-rw-r--r--drivers/staging/winbond/wbusb.c2
-rw-r--r--drivers/usb/class/cdc-acm.c2
-rw-r--r--drivers/usb/class/usblp.c2
-rw-r--r--drivers/usb/host/fhci-sched.c2
-rw-r--r--drivers/usb/serial/kl5kusb105.c2
-rw-r--r--drivers/usb/wusbcore/wusbhc.c2
-rw-r--r--drivers/uwb/wlp/wss-lc.c2
-rw-r--r--drivers/video/backlight/locomolcd.c4
-rw-r--r--drivers/video/carminefb.c2
-rw-r--r--drivers/video/tgafb.c2
87 files changed, 119 insertions, 126 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 51ceaee..e1e7143 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -335,7 +335,7 @@ static void cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c,
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
-#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
+#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1)
#ifdef CONFIG_PROC_FS
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index dff4870..ec1711f 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1087,7 +1087,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
} else {
epoch->flags = 0;
atomic_set(&epoch->epoch_size, 0);
- /* atomic_set(&epoch->active, 0); is alrady zero */
+ /* atomic_set(&epoch->active, 0); is already zero */
if (rv == FE_STILL_LIVE)
rv = FE_RECYCLED;
}
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 218d091..16c3c86 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -4,7 +4,7 @@
* Note that you can not swap over this thing, yet. Seems to work but
* deadlocks sometimes - you can not swap over TCP in general.
*
- * Copyright 1997-2000, 2008 Pavel Machek <pavel@suse.cz>
+ * Copyright 1997-2000, 2008 Pavel Machek <pavel@ucw.cz>
* Parts copyright 2001 Steven Whitehouse <steve@chygwyn.com>
*
* This file is released under GPLv2 or later.
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 4561ce2..334cf5c 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -4845,7 +4845,7 @@ static int register_test(struct slgt_info *info)
{
static unsigned short patterns[] =
{0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
- static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
+ static unsigned int count = ARRAY_SIZE(patterns);
unsigned int i;
int rc = 0;
diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h
index 7d4edb0..5f5fbc0 100644
--- a/drivers/crypto/amcc/crypto4xx_reg_def.h
+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
@@ -113,7 +113,7 @@
#define CRYPTO4XX_PRNG_LFSR_H 0x00070034
/**
- * Initilize CRYPTO ENGINE registers, and memory bases.
+ * Initialize CRYPTO ENGINE registers, and memory bases.
*/
#define PPC4XX_PDR_POLL 0x3ff
#define PPC4XX_OUTPUT_THRESHOLD 2
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index bd5250e..e880760 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -69,7 +69,7 @@ static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
}
/**
- * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * atc_alloc_descriptor - allocate and return an initialized descriptor
* @chan: the channel to allocate descriptors for
* @gfp_flags: GFP allocation flags
*
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 8088b14..f0fd6db 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -10,7 +10,7 @@
* Description:
* DMA engine driver for Freescale MPC8540 DMA controller, which is
* also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
- * The support for MPC8349 DMA contorller is also added.
+ * The support for MPC8349 DMA controller is also added.
*
* This driver instructs the DMA controller to issue the PCI Read Multiple
* command for PCI read operations, instead of using the default PCI Read Line
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f87bf10..9585e53 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -929,13 +929,11 @@ drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
{ 1440, 576 },
{ 2880, 576 },
};
- static const int n_sizes =
- sizeof(cea_interlaced)/sizeof(cea_interlaced[0]);
if (!(pt->misc & DRM_EDID_PT_INTERLACED))
return;
- for (i = 0; i < n_sizes; i++) {
+ for (i = 0; i < ARRAY_SIZE(cea_interlaced); i++) {
if ((mode->hdisplay == cea_interlaced[i].w) &&
(mode->vdisplay == cea_interlaced[i].h / 2)) {
mode->vdisplay *= 2;
@@ -1375,7 +1373,6 @@ static const struct {
{ 1920, 1440, 60, 0 },
{ 1920, 1440, 75, 0 },
};
-static const int num_est3_modes = sizeof(est3_modes) / sizeof(est3_modes[0]);
static int
drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
@@ -1387,7 +1384,7 @@ drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
for (i = 0; i < 6; i++) {
for (j = 7; j > 0; j--) {
m = (i * 8) + (7 - j);
- if (m >= num_est3_modes)
+ if (m >= ARRAY_SIZE(est3_modes))
break;
if (est[i] & (1 << j)) {
mode = drm_mode_find_dmt(connector->dev,
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 76993ac..03c231b 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -392,13 +392,13 @@ static void intel_sdvo_debug_write(struct intel_encoder *intel_encoder, u8 cmd,
DRM_LOG_KMS("%02X ", ((u8 *)args)[i]);
for (; i < 8; i++)
DRM_LOG_KMS(" ");
- for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) {
if (cmd == sdvo_cmd_names[i].cmd) {
DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name);
break;
}
}
- if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0]))
+ if (i == ARRAY_SIZE(sdvo_cmd_names))
DRM_LOG_KMS("(%02X)", cmd);
DRM_LOG_KMS("\n");
}
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 6d553c2..d2d4e40 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1424,7 +1424,7 @@ intel_tv_get_modes(struct drm_connector *connector)
int j, count = 0;
u64 tmp;
- for (j = 0; j < sizeof(input_res_table) / sizeof(input_res_table[0]);
+ for (j = 0; j < ARRAY_SIZE(input_res_table);
j++) {
struct input_res *input = &input_res_table[j];
unsigned int hactive_s = input->w;
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index 2d0c9ca..fa05cda 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -552,7 +552,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset)
/*
- * Initalize mappings. On Savage4 and SavageIX the alignment
+ * Initialize mappings. On Savage4 and SavageIX the alignment
* and size of the aperture is not suitable for automatic MTRR setup
* in drm_addmap. Therefore we add them manually before the maps are
* initialized, and tear them down on last close.
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 8612378..5f2d5df 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -1017,7 +1017,7 @@ int vmw_gmr_id_alloc(struct vmw_private *dev_priv, uint32_t *p_id)
}
/*
- * Stream managment
+ * Stream management
*/
static void vmw_stream_destroy(struct vmw_resource *res)
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index c102d23..7939953 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -92,7 +92,7 @@ static void ide_disk_release(struct device *dev)
/*
* On HPA drives the capacity needs to be
- * reinitilized on resume otherwise the disk
+ * reinitialized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_gd_resume(ide_drive_t *drive)
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index ae47bfd..9bbb65b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -816,7 +816,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&rchp->cq);
@@ -827,7 +827,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag)
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&schp->cq);
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 7065cb3..86b93f2 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -905,7 +905,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&rchp->cq);
@@ -916,7 +916,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp,
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&schp->cq);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
index 39c1c36..a46e514 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.h
+++ b/drivers/infiniband/hw/ehca/hcp_if.h
@@ -49,7 +49,7 @@
#include "hipz_hw.h"
/*
- * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize
+ * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize
* resources, create the empty EQPT (ring).
*/
u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 9c5c66d..65eb892 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -2055,7 +2055,7 @@ static int ipath_close(struct inode *in, struct file *fp)
mutex_lock(&ipath_mutex);
- fd = (struct ipath_filedata *) fp->private_data;
+ fd = fp->private_data;
fp->private_data = NULL;
pd = fd->pd;
if (!pd) {
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0fe27ba..c431d09 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -1118,7 +1118,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq,
if (error)
goto err_free_mem;
- /* initilize and request sw/hw resources */
+ /* initialize and request sw/hw resources */
ad714x_hw_init(ad714x);
mutex_init(&ad714x->mutex);
diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c
index d421536..472a2af 100644
--- a/drivers/isdn/hardware/mISDN/avmfritz.c
+++ b/drivers/isdn/hardware/mISDN/avmfritz.c
@@ -1116,7 +1116,7 @@ fritz_remove_pci(struct pci_dev *pdev)
release_card(card);
else
if (debug)
- pr_info("%s: drvdata allready removed\n", __func__);
+ pr_info("%s: drvdata already removed\n", __func__);
}
static struct pci_device_id fcpci_ids[] __devinitdata = {
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 095ed76..d317195 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -4268,7 +4268,7 @@ init_card(struct hfc_multi *hc)
goto error;
/*
* Finally enable IRQ output
- * this is only allowed, if an IRQ routine is allready
+ * this is only allowed, if an IRQ routine is already
* established for this HFC, so don't do that earlier
*/
spin_lock_irqsave(&hc->lock, flags);
@@ -5212,7 +5212,7 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev)
spin_unlock_irqrestore(&HFClock, flags);
} else {
if (debug)
- printk(KERN_DEBUG "%s: drvdata allready removed\n",
+ printk(KERN_DEBUG "%s: drvdata already removed\n",
__func__);
}
}
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 5940a2c..65ded05 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1773,7 +1773,7 @@ init_card(struct hfc_pci *hc)
inithfcpci(hc);
/*
* Finally enable IRQ output
- * this is only allowed, if an IRQ routine is allready
+ * this is only allowed, if an IRQ routine is already
* established for this HFC, so don't do that earlier
*/
enable_hwirq(hc);
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index f5b3d2b..4975976 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -1150,7 +1150,7 @@ inf_remove(struct pci_dev *pdev)
if (card)
release_card(card);
else
- pr_debug("%s: drvdata allready removed\n", __func__);
+ pr_debug("%s: drvdata already removed\n", __func__);
}
static struct pci_driver infineon_driver = {
diff --git a/drivers/isdn/hardware/mISDN/speedfax.c b/drivers/isdn/hardware/mISDN/speedfax.c
index d097a4e..9e07246 100644
--- a/drivers/isdn/hardware/mISDN/speedfax.c
+++ b/drivers/isdn/hardware/mISDN/speedfax.c
@@ -484,7 +484,7 @@ sfax_remove_pci(struct pci_dev *pdev)
if (card)
release_card(card);
else
- pr_debug("%s: drvdata allready removed\n", __func__);
+ pr_debug("%s: drvdata already removed\n", __func__);
}
static struct pci_device_id sfaxpci_ids[] __devinitdata = {
diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c
index 31f9d71..9e84870 100644
--- a/drivers/isdn/hardware/mISDN/w6692.c
+++ b/drivers/isdn/hardware/mISDN/w6692.c
@@ -1402,7 +1402,7 @@ w6692_remove_pci(struct pci_dev *pdev)
release_card(card);
else
if (debug)
- pr_notice("%s: drvdata allready removed\n", __func__);
+ pr_notice("%s: drvdata already removed\n", __func__);
}
static struct pci_device_id w6692_ids[] = {
diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c
index f58ded8..f150330 100644
--- a/drivers/isdn/hisax/callc.c
+++ b/drivers/isdn/hisax/callc.c
@@ -1172,7 +1172,7 @@ CallcFreeChan(struct IsdnCardState *csta)
kfree(csta->channel[i].b_st);
csta->channel[i].b_st = NULL;
} else
- printk(KERN_WARNING "CallcFreeChan b_st ch%d allready freed\n", i);
+ printk(KERN_WARNING "CallcFreeChan b_st ch%d already freed\n", i);
if (i || test_bit(FLG_TWO_DCHAN, &csta->HW_Flags)) {
release_d_st(csta->channel + i);
} else
diff --git a/drivers/isdn/hisax/tei.c b/drivers/isdn/hisax/tei.c
index f4cb178..842f9c9 100644
--- a/drivers/isdn/hisax/tei.c
+++ b/drivers/isdn/hisax/tei.c
@@ -130,7 +130,7 @@ tei_id_request(struct FsmInst *fi, int event, void *arg)
if (st->l2.tei != -1) {
st->ma.tei_m.printdebug(&st->ma.tei_m,
- "assign request for allready asigned tei %d",
+ "assign request for already asigned tei %d",
st->l2.tei);
return;
}
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 34e898f..1b85d9d 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -457,7 +457,7 @@ tei_id_request(struct FsmInst *fi, int event, void *arg)
if (tm->l2->tei != GROUP_TEI) {
tm->tei_m.printdebug(&tm->tei_m,
- "assign request for allready assigned tei %d",
+ "assign request for already assigned tei %d",
tm->l2->tei);
return;
}
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 0c87a3c..a19f649 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1297,7 +1297,7 @@ int smsclient_sendrequest(struct smscore_client_t *client,
EXPORT_SYMBOL_GPL(smsclient_sendrequest);
-/* old GPIO managments implementation */
+/* old GPIO managements implementation */
int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
struct smscore_config_gpio *pinconfig)
{
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 0c786e0..d0a133a 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -805,7 +805,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
/* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 1);
- /* Twice sequencial need status 0xff->0x9e->0x9d */
+ /* Twice sequential need status 0xff->0x9e->0x9d */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 0);
@@ -880,7 +880,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
/* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 1);
- /* Twice sequencial need status 0xff->0x9e->0x9d */
+ /* Twice sequential need status 0xff->0x9e->0x9d */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 0);
spca504A_acknowledged_command(gspca_dev, 0x24,
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 6030410..5d6fd01 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -2,7 +2,7 @@
* USB ViCam WebCam driver
* Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
* Christopher L Cheney (ccheney@cheney.cx),
- * Pavel Machek (pavel@suse.cz),
+ * Pavel Machek (pavel@ucw.cz),
* John Tyner (jtyner@cs.ucr.edu),
* Monroe Williams (monroe@pobox.com)
*
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 9004a5f..d2f20c2 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -5,7 +5,7 @@
* Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 2001,2002 Andi Kleen, SuSE Labs
- * Copyright (C) 2003 Pavel Machek (pavel@suse.cz)
+ * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz)
* Copyright (C) 2005 Philippe De Muyter (phdm@macqel.be)
* Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
*
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 8997add..307e847 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -391,7 +391,7 @@ struct zoran {
struct mutex resource_lock; /* prevent evil stuff */
- u8 initialized; /* flag if zoran has been correctly initalized */
+ u8 initialized; /* flag if zoran has been correctly initialized */
int user; /* number of current users */
struct card_info card;
struct tvnorm *timing;
diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c
index e6ad4b2..6f846ab 100644
--- a/drivers/media/video/zoran/zoran_device.c
+++ b/drivers/media/video/zoran/zoran_device.c
@@ -484,7 +484,7 @@ zr36057_overlay (struct zoran *zr,
zr->overlay_settings.format);
/* Start and length of each line MUST be 4-byte aligned.
- * This should be allready checked before the call to this routine.
+ * This should be already checked before the call to this routine.
* All error messages are internal driver checking only! */
/* video display top and bottom registers */
diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c
index 639dd87..e198560 100644
--- a/drivers/media/video/zoran/zr36050.c
+++ b/drivers/media/video/zoran/zr36050.c
@@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36050 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36050_dqt[0x86] = {
diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c
index 008746f..5e4f57c 100644
--- a/drivers/media/video/zoran/zr36060.c
+++ b/drivers/media/video/zoran/zr36060.c
@@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr,
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36060 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36060_dqt[0x86] = {
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index a6a5701..14d162f 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1794,7 +1794,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->sh = NULL;
ioc->cached_fw = NULL;
- /* Initilize SCSI Config Data structure
+ /* Initialize SCSI Config Data structure
*/
memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
@@ -2471,7 +2471,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
/*
- * Initalize link list for inactive raid volumes.
+ * Initialize link list for inactive raid volumes.
*/
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca03428..3dfda9c 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern,
};
-/* initalize driver data structures */
+/* initialize driver data structures */
void denali_drv_init(struct denali_nand_info *denali)
{
denali->idx = 0;
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 38395df..70705d1 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev)
* mc32_load_rx_ring - load the ring of receive buffers
* @dev: 3c527 to build the ring for
*
- * This initalises the on-card and driver datastructures to
+ * This initialises the on-card and driver datastructures to
* the point where mc32_start_transceiver() can be called.
*
* The card sets up the receive ring for us. We are required to use the
* ring it provides, although the size of the ring is configurable.
*
* We allocate an sk_buff for each ring entry in turn and
- * initalise its house-keeping info. At the same time, we read
+ * initialise its house-keeping info. At the same time, we read
* each 'next' pointer in our rx_ring array. This reduces slow
* shared-memory reads and makes it easy to access predecessor
* descriptors.
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 79636ee..0362c8d 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void)
if (version_printed++ == 0)
printk(version);
- /* Initalize the device structure. */
+ /* Initialize the device structure. */
dev->netdev_ops = &ipddp_netdev_ops;
dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 063026d..3f1b7c3 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -52,7 +52,7 @@
*/
#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
-/********* Power managment (WOL) **********/
+/********* Power management (WOL) **********/
#define PCICFG_PM_CONTROL_OFFSET 0x44
#define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 28b53d1..efd4c70 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -916,7 +916,7 @@ static void gfar_init_filer_table(struct gfar_private *priv)
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP);
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP);
- /* cur_filer_idx indicated the fisrt non-masked rule */
+ /* cur_filer_idx indicated the first non-masked rule */
priv->cur_filer_idx = rqfar;
/* Rest are masked rules */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 68e5ac8..dfc787f 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1071,7 +1071,7 @@ static void hp100_mmuinit(struct net_device *dev)
if (lp->mode == 1)
hp100_init_pdls(dev);
- /* Go to performance page and initalize isr and imr registers */
+ /* Go to performance page and initialize isr and imr registers */
hp100_page(PERFORMANCE);
hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index b150c10..0f1d4e9 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1045,7 +1045,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu)
DBG(dev, "change_mtu(%d)" NL, new_mtu);
if (netif_running(ndev)) {
- /* Check if we really need to reinitalize RX ring */
+ /* Check if we really need to reinitialize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 7805bbf..aa50ee1 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -6812,7 +6812,7 @@ static int stp;
static int fast_aging;
/**
- * netdev_init - initalize network device.
+ * netdev_init - initialize network device.
* @dev: Network device.
*
* This function initializes the network device.
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 6474c49..dc6bf04 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -449,7 +449,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options)
return (0);
}
-/* Initilize temac */
+/* Initialize temac */
static void temac_device_reset(struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 501a55f..70a9bc5 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1325,7 +1325,7 @@ static int sh_mdio_init(struct net_device *ndev, int id)
bitbang->mdc_msk = 0x01;
bitbang->ctrl.ops = &bb_ops;
- /* MII contorller setting */
+ /* MII controller setting */
mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!mdp->mii_bus) {
ret = -ENOMEM;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 29e6c63..0bc4f30 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev)
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
- /* Initilize DM910X board */
+ /* Initialize DM910X board */
dmfe_init_dm910x(dev);
/* Active System Interface */
@@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev)
}
-/* Initilize DM910X board
+/* Initialize DM910X board
* Reset DM910X board
- * Initilize TX/Rx descriptor chain structure
+ * Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
@@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
if ( !(db->media_mode & DMFE_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
- /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
dmfe_descriptor_init(db, ioaddr);
/* Init CR6 to program DM910x operation */
@@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data)
* Stop DM910X board
* Free Tx/Rx allocated memory
* Reset DM910X board
- * Re-initilize DM910X board
+ * Re-initialize DM910X board
*/
static void dmfe_dynamic_reset(struct DEVICE *dev)
@@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
netif_carrier_off(dev);
db->wait_reset = 0;
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Restart upper layer interface */
@@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
/*
* Send a setup frame for DM9132
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void dm9132_id_table(struct DEVICE *dev)
@@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev)
/*
* Send a setup frame for DM9102/DM9102A
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void send_filter_frame(struct DEVICE *dev)
@@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev)
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Disable WOL */
@@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
/* Description:
* when user used insmod to add module, system invoked init_module()
- * to initilize and register.
+ * to initialize and register.
*/
static int __init dmfe_init_module(void)
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d86e8f3..7f48e04 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -50,7 +50,7 @@
*
* ROADMAP
*
- * i2400m_dev_initalize() Called by i2400m_dev_start()
+ * i2400m_dev_initialize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 231dbd7..cb3c25f 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -1225,7 +1225,7 @@ static void ap_crypt_init(struct ap_data *ap)
/* Generate challenge data for shared key authentication. IEEE 802.11 specifies
- * that WEP algorithm is used for generating challange. This should be unique,
+ * that WEP algorithm is used for generating challenge. This should be unique,
* but otherwise there is not really need for randomness etc. Initialize WEP
* with pseudo random key and then use increasing IV to get unique challenge
* streams.
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 2f999fc..e9d9d62 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -1896,7 +1896,7 @@ fail:
/* Some SMP systems have reported number of odd errors with hostap_pci. fid
* register has changed values between consecutive reads for an unknown reason.
* This should really not happen, so more debugging is needed. This test
- * version is a big slower, but it will detect most of such register changes
+ * version is a bit slower, but it will detect most of such register changes
* and will try to get the correct fid eventually. */
#define EXTRA_FID_READ_TESTS
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index f511e70..75a80e46b 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1241,10 +1241,10 @@ static struct parisc_driver ccio_driver = {
};
/**
- * ccio_ioc_init - Initalize the I/O Controller
+ * ccio_ioc_init - Initialize the I/O Controller
* @ioc: The I/O Controller.
*
- * Initalize the I/O Controller which includes setting up the
+ * Initialize the I/O Controller which includes setting up the
* I/O Page Directory, the resource map, and initalizing the
* U2/Uturn chip into virtual mode.
*/
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index fa28d89..0c62fe3 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -231,7 +231,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
sinfo->nskt = nr;
- /* Initiliaze processor specific parameters */
+ /* Initialize processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 08fa453..74e9d22 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -808,7 +808,7 @@ int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
/**
* rio_std_route_get_entry - Read switch route table entry (port number)
- * assosiated with specified destID using standard registers defined in RIO
+ * associated with specified destID using standard registers defined in RIO
* specification rev.1.3
* @mport: Master port to issue transaction
* @destid: Destination ID of the device
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
index ff6fce6..e4de8f3 100644
--- a/drivers/rtc/rtc-fm3130.c
+++ b/drivers/rtc/rtc-fm3130.c
@@ -104,7 +104,7 @@ static int fm3130_get_time(struct device *dev, struct rtc_time *t)
if (!fm3130->data_valid) {
/* We have invalid data in RTC, probably due
to battery faults or other problems. Return EIO
- for now, it will allow us to set data later insted
+ for now, it will allow us to set data later instead
of error during probing which disables device */
return -EIO;
}
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 789f62f..1146e35 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -461,7 +461,7 @@ static struct rtc_class_ops rx8025_rtc_ops = {
* Clock precision adjustment support
*
* According to the RX8025 SA/NB application manual the frequency and
- * temperature charateristics can be approximated using the following
+ * temperature characteristics can be approximated using the following
* equation:
*
* df = a * (ut - t)**2
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 7f87979..0ec3da6 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9717,7 +9717,7 @@ static ushort __devinit AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
asc_dvc->bug_fix_cntl = 0;
asc_dvc->pci_fix_asyn_xfer = 0;
asc_dvc->pci_fix_asyn_xfer_always = 0;
- /* asc_dvc->init_state initalized in AscInitGetConfig(). */
+ /* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
asc_dvc->is_in_int = 0;
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index f6fc4b7..5997e7c 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -615,7 +615,7 @@ ultra2_dmafifoflush:
* went empty and the next bit of data is copied from
* the SCSI fifo into the PCI fifo. It should only
* come on when both FIFOs (meaning the entire FIFO
- * chain) are emtpy. Since it can take up to 4 cycles
+ * chain) are empty. Since it can take up to 4 cycles
* for new data to be copied from the SCSI fifo into
* the PCI fifo, testing for FIFOEMP status for 4
* extra times gives the needed time for any
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index d01dcc6..7437461 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -588,7 +588,7 @@ static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
- * Setup and initialize Central sequencers. Initialiaze the mode
+ * Setup and initialize Central sequencers. Initialize the mode
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
@@ -782,7 +782,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
- * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
+ * (ENABLE SPINUP) primitive. Must be initialized to val - 1.
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 3a7b3f8..d845506 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -335,7 +335,7 @@ bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids)
{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT},
};
- *npciids = sizeof(__pciids) / sizeof(__pciids[0]);
+ *npciids = ARRAY_SIZE(__pciids);
*pciids = __pciids;
}
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index 3516172..153cb2a 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -86,7 +86,7 @@ bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
bfa_attach_fcs(bfa);
fcbuild_init();
- for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) {
mod = &fcs_modules[i];
if (mod->attach)
mod->attach(fcs);
@@ -102,7 +102,7 @@ bfa_fcs_init(struct bfa_fcs_s *fcs)
int i;
struct bfa_fcs_mod_s *mod;
- for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) {
mod = &fcs_modules[i];
if (mod->modinit)
mod->modinit(fcs);
@@ -163,13 +163,11 @@ void
bfa_fcs_exit(struct bfa_fcs_s *fcs)
{
struct bfa_fcs_mod_s *mod;
- int nmods, i;
+ int i;
bfa_wc_init(&fcs->wc, bfa_fcs_exit_comp, fcs);
- nmods = sizeof(fcs_modules) / sizeof(fcs_modules[0]);
-
- for (i = 0; i < nmods; i++) {
+ for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) {
mod = &fcs_modules[i];
if (mod->modexit) {
diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c
index 687f3d6..3d2eac1 100644
--- a/drivers/scsi/bfa/bfa_ioim.c
+++ b/drivers/scsi/bfa/bfa_ioim.c
@@ -488,7 +488,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
case BFA_IOIM_SM_ABORT:
/**
- * IO is alraedy being cleaned up implicitly
+ * IO is already being cleaned up implicitly
*/
ioim->io_cbfn = __bfa_cb_ioim_abort;
break;
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
index 27cd619..e2720c8 100644
--- a/drivers/scsi/bfa/vport.c
+++ b/drivers/scsi/bfa/vport.c
@@ -789,7 +789,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
switch (status) {
case BFA_STATUS_OK:
/*
- * Initialiaze the V-Port fields
+ * Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 44a0759..fe568ef 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2452,7 +2452,7 @@ module_exit(fcoe_exit);
* @fp: response frame, or error encoded in a pointer (timeout)
* @arg: pointer the the fcoe_ctlr structure
*
- * This handles MAC address managment for FCoE, then passes control on to
+ * This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
*/
static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
@@ -2484,7 +2484,7 @@ done:
* @fp: response frame, or error encoded in a pointer (timeout)
* @arg: pointer the the fcoe_ctlr structure
*
- * This handles MAC address managment for FCoE, then passes control on to
+ * This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
*/
static void fcoe_logo_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 104e0fb..ca52bfa 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -219,8 +219,6 @@ static void fc_exch_els_rrq(struct fc_seq *, struct fc_frame *);
*/
static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT;
-#define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0]))
-
/**
* fc_exch_name_lookup() - Lookup name by opcode
* @op: Opcode to be looked up
@@ -249,7 +247,7 @@ static inline const char *fc_exch_name_lookup(unsigned int op, char **table,
static const char *fc_exch_rctl_name(unsigned int op)
{
return fc_exch_name_lookup(op, fc_exch_rctl_names,
- FC_TABLE_SIZE(fc_exch_rctl_names));
+ ARRAY_SIZE(fc_exch_rctl_names));
}
/**
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 79c9e3c..ef32b06 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -32,11 +32,11 @@
* invalid SID. We also need to ensure that states don't change unexpectedly
* while processing another state.
*
- * HEIRARCHY
+ * HIERARCHY
*
- * The following heirarchy defines the locking rules. A greater lock
+ * The following hierarchy defines the locking rules. A greater lock
* may be held before acquiring a lesser lock, but a lesser lock should never
- * be held while attempting to acquire a greater lock. Here is the heirarchy-
+ * be held while attempting to acquire a greater lock. Here is the hierarchy-
*
* lport > disc, lport > rport, disc > rport
*
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 39e440f..2aa5993 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -34,7 +34,7 @@
* The rport should never hold the rport mutex and then attempt to acquire
* either the lport or disc mutexes. The rport's mutex is considered lesser
* than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
- * more comments on the heirarchy.
+ * more comments on the hierarchy.
*
* The locking strategy is similar to the lport's strategy. The lock protects
* the rport's states and is held and released by the entry points to the rport
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index b4afe43..41c29a8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -474,7 +474,7 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
* @shost_recovery: host reset in progress
* @ioc_reset_in_progress_lock:
* @ioc_link_reset_in_progress: phy/hard reset in progress
- * @ignore_loginfos: ignore loginfos during task managment
+ * @ignore_loginfos: ignore loginfos during task management
* @remove_host: flag for when driver unloads, to avoid sending dev resets
* @wait_for_port_enable_to_complete:
* @msix_enable: flag indicating msix is enabled
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index c5ff26a..06d645a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2979,7 +2979,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
/* host recovery or link resets sent via IOCTLs */
if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
return SCSI_MLQUEUE_HOST_BUSY;
- /* device busy with task managment */
+ /* device busy with task management */
else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
return SCSI_MLQUEUE_DEVICE_BUSY;
/* device has been deleted */
@@ -6845,7 +6845,7 @@ _scsih_init(void)
/* queuecommand callback hander */
scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
- /* task managment callback handler */
+ /* task management callback handler */
tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
/* base internal commands callback handler */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 5ff8261..e81efac 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1082,7 +1082,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm8001_chip_iounmap - which maped when initilized.
+ * pm8001_chip_iounmap - which maped when initialized.
* @pm8001_ha: our hba card information
*/
static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
@@ -4152,7 +4152,7 @@ static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
}
/**
- * pm8001_chip_ssp_tm_req - built the task managment command.
+ * pm8001_chip_ssp_tm_req - built the task management command.
* @pm8001_ha: our hba card information.
* @ccb: the ccb information.
* @tmf: task management function.
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 8ef9453..782b30d 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1129,7 +1129,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32(
MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
fcp_cmnd->task_attribute = 0;
- fcp_cmnd->task_managment = 0;
+ fcp_cmnd->task_management = 0;
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index f8f99a5..1b44d01 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -832,7 +832,7 @@ struct fcp_cmnd {
struct scsi_lun lun;
uint8_t crn;
uint8_t task_attribute;
- uint8_t task_managment;
+ uint8_t task_management;
uint8_t additional_cdb_len;
uint8_t cdb[260]; /* 256 for CDB len and 4 for FCP_DL */
};
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 5510df8..cd30432 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -183,7 +183,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha)
**/
static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
{
- /* Initilize aen queue */
+ /* Initialize aen queue */
ha->aen_q_count = MAX_AEN_ENTRIES;
return qla4xxx_get_firmware_status(ha);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 0681378..edb6b36 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -965,7 +965,7 @@ static FC_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR,
/*
* Note: in the target show function we recognize when the remote
- * port is in the heirarchy and do not allow the driver to get
+ * port is in the hierarchy and do not allow the driver to get
* involved in sysfs functions. The driver only gets involved if
* it's the "old" style that doesn't use rports.
*/
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 24661cd..768612f 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -2649,7 +2649,7 @@ static int __init rs_360_init(void)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
@@ -2728,7 +2728,7 @@ static int __init rs_360_init(void)
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
up->mrblr = 1;
@@ -2886,7 +2886,7 @@ int serial_console_setup( struct console *co, char *options)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index cd6cf57..6016179 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -852,7 +852,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
*/
cpm_set_smc_fcr(up);
- /* Using idle charater time requires some additional tuning. */
+ /* Using idle character time requires some additional tuning. */
out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
out_be16(&up->smc_brklen, 0);
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 3c02fa9..e65b0d9 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
uart_console_write(&up->port, s, count, nwpserial_console_putchar);
- /* wait for transmitter to become emtpy */
+ /* wait for transmitter to become empty */
while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
cpu_relax();
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0c..7e5e5ef 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 681419d..251caa0 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008 Pavel Machek <pavel@suse.cz>
+ * Copyright 2008 Pavel Machek <pavel@ucw.cz>
*
* Distribute under GPLv2.
*
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 162c95a..89d260d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -2,7 +2,7 @@
* cdc-acm.c
*
* Copyright (c) 1999 Armin Fuerst <fuerst@in.tum.de>
- * Copyright (c) 1999 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com>
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2004 Oliver Neukum <oliver@neukum.name>
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 2250095..84f9e52 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -2,7 +2,7 @@
* usblp.c
*
* Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
- * Copyright (c) 1999 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
# Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 4f2cbdc..a42ef38 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -125,7 +125,7 @@ void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
/*
* Flush all transmitted packets from BDs
* This routine is called when disabling the USB port to flush all
- * transmissions that are allready scheduled in the BDs
+ * transmissions that are already scheduled in the BDs
*/
void fhci_flush_all_transmissions(struct fhci_usb *usb)
{
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index cdbe8bf..e8a65ce 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -261,7 +261,7 @@ static int klsi_105_startup(struct usb_serial *serial)
spin_lock_init(&priv->lock);
- /* priv->termios is left uninitalized until port opening */
+ /* priv->termios is left uninitialized until port opening */
init_waitqueue_head(&serial->port[i]->write_wait);
}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index eab86e4..2054d4e 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -26,7 +26,7 @@
* the one that requires (phase B, wusbhc_b_{create,destroy}).
*
* This is so because usb_add_hcd() will start the HC, and thus, all
- * the HC specific stuff has to be already initialiazed (like sysfs
+ * the HC specific stuff has to be already initialized (like sysfs
* thingies).
*/
#include <linux/device.h>
diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c
index 90accdd..a005d2a 100644
--- a/drivers/uwb/wlp/wss-lc.c
+++ b/drivers/uwb/wlp/wss-lc.c
@@ -180,7 +180,7 @@ error_kobject_register:
* If memory was allocated for the kobject's name then it will
* be freed by the kobject system during this time.
*
- * The EDA cache is removed and reinitilized when the WSS is removed. We
+ * The EDA cache is removed and reinitialized when the WSS is removed. We
* thus loose knowledge of members of this WSS at that time and need not do
* it here.
*/
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index 7571bc2..d2f5901 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -2,7 +2,7 @@
* Backlight control code for Sharp Zaurus SL-5500
*
* Copyright 2005 John Lenz <lenz@cs.wisc.edu>
- * Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-)
+ * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-)
* GPL v2
*
* This driver assumes single CPU. That's okay, because collie is
@@ -246,6 +246,6 @@ static void __exit locomolcd_exit(void)
module_init(locomolcd_init);
module_exit(locomolcd_exit);
-MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>");
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>");
MODULE_DESCRIPTION("Collie LCD driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index d8345fc..6b19136 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -432,7 +432,7 @@ static int init_hardware(struct carmine_hw *hw)
u32 loops;
u32 ret;
- /* Initalize Carmine */
+ /* Initialize Carmine */
/* Sets internal clock */
c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE,
CARMINE_DFLT_IP_CLOCK_ENABLE);
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index 1b3b1c7..aba7686 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -305,7 +305,7 @@ tgafb_set_par(struct fb_info *info)
TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vtimings, TGA_VERT_REG);
- /* Initalise RAMDAC. */
+ /* Initialise RAMDAC. */
if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) {
/* Init BT485 RAMDAC registers. */