diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/lm85.c | 82 |
1 files changed, 2 insertions, 80 deletions
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 0c0fede..0d31435 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -56,16 +56,9 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_PWM(nr) (0x30 + (nr)) -#define ADT7463_REG_OPPOINT(nr) (0x33 + (nr)) - -#define ADT7463_REG_TMIN_CTL1 0x36 -#define ADT7463_REG_TMIN_CTL2 0x37 - -#define LM85_REG_DEVICE 0x3d #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f /* These are the recognized values for the above regs */ -#define LM85_DEVICE_ADX 0x27 #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 #define LM85_COMPANY_SMSC 0x5c @@ -91,27 +84,14 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) #define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) #define LM85_REG_AFAN_SPIKE1 0x62 -#define LM85_REG_AFAN_SPIKE2 0x63 #define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) #define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) #define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) #define LM85_REG_AFAN_HYST1 0x6d #define LM85_REG_AFAN_HYST2 0x6e -#define LM85_REG_TACH_MODE 0x74 -#define LM85_REG_SPINUP_CTL 0x75 - -#define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr)) -#define ADM1027_REG_CONFIG2 0x73 -#define ADM1027_REG_INTMASK1 0x74 -#define ADM1027_REG_INTMASK2 0x75 #define ADM1027_REG_EXTEND_ADC1 0x76 #define ADM1027_REG_EXTEND_ADC2 0x77 -#define ADM1027_REG_CONFIG3 0x78 -#define ADM1027_REG_FAN_PPR 0x7b - -#define ADT7463_REG_THERM 0x79 -#define ADT7463_REG_THERM_LIMIT 0x7A #define EMC6D100_REG_ALARM3 0x7d /* IN5, IN6 and IN7 */ @@ -263,13 +243,6 @@ static int ZONE_TO_REG(int zone) #define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15) #define HYST_FROM_REG(val) ((val) * 1000) -#define OFFSET_TO_REG(val) SENSORS_LIMIT((val) / 25, -127, 127) -#define OFFSET_FROM_REG(val) ((val) * 25) - -#define PPR_MASK(fan) (0x03 << ((fan) * 2)) -#define PPR_TO_REG(val, fan) (SENSORS_LIMIT((val) - 1, 0, 3) << ((fan) * 2)) -#define PPR_FROM_REG(val, fan) ((((val) >> ((fan) * 2)) & 0x03) + 1) - /* Chip sampling rates * * Some sensors are not updated more frequently than once per second @@ -330,23 +303,15 @@ struct lm85_data { s8 temp[3]; /* Register value */ s8 temp_min[3]; /* Register value */ s8 temp_max[3]; /* Register value */ - s8 temp_offset[3]; /* Register value */ u16 fan[4]; /* Register value */ u16 fan_min[4]; /* Register value */ u8 pwm[3]; /* Register value */ - u8 spinup_ctl; /* Register encoding, combined */ - u8 tach_mode; /* Register encoding, combined */ u8 temp_ext[3]; /* Decoded values */ u8 in_ext[8]; /* Decoded values */ - u8 fan_ppr; /* Register value */ - u8 smooth[3]; /* Register encoding */ + u8 smooth[1]; /* Register encoding */ u8 vid; /* Register value */ u8 vrm; /* VRM version */ u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ - u8 oppoint[3]; /* Register value */ - u16 tmin_ctl; /* Register value */ - unsigned long therm_total; /* Cummulative therm count */ - u8 therm_limit; /* Register value */ u32 alarms; /* Register encoding, combined */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; @@ -1335,10 +1300,6 @@ static int lm85_read_value(struct i2c_client *client, u8 reg) res = i2c_smbus_read_byte_data(client, reg) & 0xff; res |= i2c_smbus_read_byte_data(client, reg + 1) << 8; break; - case ADT7463_REG_TMIN_CTL1: /* Read WORD MSB, LSB */ - res = i2c_smbus_read_byte_data(client, reg) << 8; - res |= i2c_smbus_read_byte_data(client, reg + 1) & 0xff; - break; default: /* Read BYTE data */ res = i2c_smbus_read_byte_data(client, reg); break; @@ -1365,11 +1326,6 @@ static int lm85_write_value(struct i2c_client *client, u8 reg, int value) res |= i2c_smbus_write_byte_data(client, reg + 1, (value >> 8) & 0xff); break; - case ADT7463_REG_TMIN_CTL1: /* Write WORD MSB, LSB */ - res = i2c_smbus_write_byte_data(client, reg, - (value >> 8) & 0xff); - res |= i2c_smbus_write_byte_data(client, reg + 1, value & 0xff); - break; default: /* Write BYTE data */ res = i2c_smbus_write_byte_data(client, reg, value); break; @@ -1483,12 +1439,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->alarms = lm85_read_value(client, LM85_REG_ALARM1); - if (data->type == adt7463) { - if (data->therm_total < ULONG_MAX - 256) { - data->therm_total += - lm85_read_value(client, ADT7463_REG_THERM); - } - } else if (data->type == emc6d100) { + if (data->type == emc6d100) { /* Three more voltage sensors */ for (i = 5; i <= 7; ++i) { data->in[i] = lm85_read_value(client, @@ -1585,9 +1536,6 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->autofan[0].min_off = (i & 0x20) != 0; data->autofan[1].min_off = (i & 0x40) != 0; data->autofan[2].min_off = (i & 0x80) != 0; - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); - data->smooth[1] = (i >> 4) & 0x0f; - data->smooth[2] = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST1); data->zone[0].hyst = (i >> 4) & 0x0f; @@ -1596,32 +1544,6 @@ static struct lm85_data *lm85_update_device(struct device *dev) i = lm85_read_value(client, LM85_REG_AFAN_HYST2); data->zone[2].hyst = (i >> 4) & 0x0f; - if (data->type == lm85b || data->type == lm85c) { - data->tach_mode = lm85_read_value(client, - LM85_REG_TACH_MODE); - data->spinup_ctl = lm85_read_value(client, - LM85_REG_SPINUP_CTL); - } else if (data->type == adt7463 || data->type == adm1027) { - if (data->type == adt7463) { - for (i = 0; i <= 2; ++i) { - data->oppoint[i] = lm85_read_value(client, - ADT7463_REG_OPPOINT(i)); - } - data->tmin_ctl = lm85_read_value(client, - ADT7463_REG_TMIN_CTL1); - data->therm_limit = lm85_read_value(client, - ADT7463_REG_THERM_LIMIT); - } - for (i = 0; i <= 2; ++i) { - data->temp_offset[i] = lm85_read_value(client, - ADM1027_REG_TEMP_OFFSET(i)); - } - data->tach_mode = lm85_read_value(client, - ADM1027_REG_CONFIG3); - data->fan_ppr = lm85_read_value(client, - ADM1027_REG_FAN_PPR); - } - data->last_config = jiffies; } /* last_config */ |