diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/acpi/events/evregion.c | 8 | ||||
| -rw-r--r-- | drivers/acpi/pci_irq.c | 9 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 24 | ||||
| -rw-r--r-- | drivers/ata/libata-pmp.c | 12 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c | 3 | ||||
| -rw-r--r-- | drivers/ata/libata-sff.c | 7 | ||||
| -rw-r--r-- | drivers/ata/pata_ixp4xx_cf.c | 3 | ||||
| -rw-r--r-- | drivers/ata/pata_pdc202xx_old.c | 15 | ||||
| -rw-r--r-- | drivers/ata/sata_qstor.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_sil24.c | 37 | ||||
| -rw-r--r-- | drivers/crypto/padlock-aes.c | 4 | ||||
| -rw-r--r-- | drivers/ide/ide-acpi.c | 36 | ||||
| -rw-r--r-- | drivers/ide/ide-iops.c | 6 | ||||
| -rw-r--r-- | drivers/ide/pci/trm290.c | 29 | ||||
| -rw-r--r-- | drivers/scsi/qla1280.c | 2 |
15 files changed, 144 insertions, 53 deletions
diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c index e99f0c4..58ad097 100644 --- a/drivers/acpi/events/evregion.c +++ b/drivers/acpi/events/evregion.c @@ -344,7 +344,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, * setup will potentially execute control methods * (e.g., _REG method for this region) */ - acpi_ex_relinquish_interpreter(); + acpi_ex_exit_interpreter(); status = region_setup(region_obj, ACPI_REGION_ACTIVATE, handler_desc->address_space.context, @@ -352,7 +352,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, /* Re-enter the interpreter */ - acpi_ex_reacquire_interpreter(); + acpi_ex_enter_interpreter(); /* Check for failure of the Region Setup */ @@ -405,7 +405,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, * exit the interpreter because the handler *might* block -- we don't * know what it will do, so we can't hold the lock on the intepreter. */ - acpi_ex_relinquish_interpreter(); + acpi_ex_exit_interpreter(); } /* Call the handler */ @@ -426,7 +426,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, * We just returned from a non-default handler, we must re-enter the * interpreter */ - acpi_ex_reacquire_interpreter(); + acpi_ex_enter_interpreter(); } return_ACPI_STATUS(status); diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index dd3186a..62010c2 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -429,6 +429,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev) &polarity, &link, acpi_pci_allocate_irq); + if (irq < 0) { + /* + * IDE legacy mode controller IRQs are magic. Why do compat + * extensions always make such a nasty mess. + */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && + (dev->class & 0x05) == 0) + return 0; + } /* * No IRQ known to the ACPI subsystem - maybe the BIOS / * driver reported one, then use it. Exit in any case. diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f0124a8..21a81cd 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1733,11 +1733,15 @@ static void ata_eh_link_autopsy(struct ata_link *link) ehc->i.action &= ~ATA_EH_PERDEV_MASK; } - /* consider speeding down */ + /* propagate timeout to host link */ + if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link)) + ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT; + + /* record error and consider speeding down */ dev = ehc->i.dev; - if (!dev && ata_link_max_devices(link) == 1 && - ata_dev_enabled(link->device)) - dev = link->device; + if (!dev && ((ata_link_max_devices(link) == 1 && + ata_dev_enabled(link->device)))) + dev = link->device; if (dev) ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask); @@ -1759,8 +1763,14 @@ void ata_eh_autopsy(struct ata_port *ap) { struct ata_link *link; - __ata_port_for_each_link(link, ap) + ata_port_for_each_link(link, ap) ata_eh_link_autopsy(link); + + /* Autopsy of fanout ports can affect host link autopsy. + * Perform host link autopsy last. + */ + if (ap->nr_pmp_links) + ata_eh_link_autopsy(&ap->link); } /** @@ -2157,13 +2167,11 @@ int ata_eh_reset(struct ata_link *link, int classify, if (ata_link_offline(link)) continue; - /* apply class override and convert UNKNOWN to NONE */ + /* apply class override */ if (lflags & ATA_LFLAG_ASSUME_ATA) classes[dev->devno] = ATA_DEV_ATA; else if (lflags & ATA_LFLAG_ASSUME_SEMB) classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */ - else if (classes[dev->devno] == ATA_DEV_UNKNOWN) - classes[dev->devno] = ATA_DEV_NONE; } /* record current link speed */ diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index c0c4dbc..caef2bb 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -495,14 +495,12 @@ static void sata_pmp_quirks(struct ata_port *ap) /* SError.N need a kick in the ass to get working */ link->flags |= ATA_LFLAG_HRST_TO_RESUME; - /* class code report is unreliable */ - if (link->pmp < 5) - link->flags |= ATA_LFLAG_ASSUME_ATA; - - /* The config device, which can be either at - * port 0 or 5, locks up on SRST. + /* Class code report is unreliable and SRST + * times out under certain configurations. + * Config device can be at port 0 or 5 and + * locks up on SRST. */ - if (link->pmp == 0 || link->pmp == 5) + if (link->pmp <= 5) link->flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a883bb0..264ae60 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -872,7 +872,8 @@ int ata_scsi_slave_config(struct scsi_device *sdev) ata_scsi_sdev_config(sdev); - sdev->manage_start_stop = 1; + if (dev->class == ATA_DEV_ATA) + sdev->manage_start_stop = 1; if (dev) ata_scsi_dev_config(sdev, dev); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 48acc09..b7ac80b 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -806,7 +806,10 @@ int ata_pci_init_one(struct pci_dev *pdev, if (rc) goto err_out; - if (!legacy_mode) { + if (!legacy_mode && pdev->irq) { + /* We may have no IRQ assigned in which case we can poll. This + shouldn't happen on a sane system but robustness is cheap + in this case */ rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); if (rc) @@ -814,7 +817,7 @@ int ata_pci_init_one(struct pci_dev *pdev, ata_port_desc(host->ports[0], "irq %d", pdev->irq); ata_port_desc(host->ports[1], "irq %d", pdev->irq); - } else { + } else if (legacy_mode) { if (!ata_port_is_dummy(host->ports[0])) { rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), pi->port_ops->irq_handler, diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index fcd532a..120b5bf 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -130,10 +130,11 @@ static struct ata_port_operations ixp4xx_port_ops = { .port_start = ata_port_start, }; -static void ixp4xx_setup_port(struct ata_ioports *ioaddr, +static void ixp4xx_setup_port(struct ata_port *ap, struct ixp4xx_pata_data *data, unsigned long raw_cs0, unsigned long raw_cs1) { + struct ata_ioports *ioaddr = &ap->ioaddr; unsigned long raw_cmd = raw_cs0; unsigned long raw_ctl = raw_cs1 + 0x06; diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index bc7c2d5..8f28156 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -215,8 +215,8 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) /* Flip back to 33Mhz for PIO */ if (adev->dma_mode >= XFER_UDMA_2) iowrite8(ioread8(clock) & ~sel66, clock); - ata_bmdma_stop(qc); + pdc202xx_set_piomode(ap, adev); } /** @@ -233,6 +233,17 @@ static void pdc2026x_dev_config(struct ata_device *adev) adev->max_sectors = 256; } +static int pdc2026x_port_start(struct ata_port *ap) +{ + void __iomem *bmdma = ap->ioaddr.bmdma_addr; + if (bmdma) { + /* Enable burst mode */ + u8 burst = ioread8(bmdma + 0x1f); + iowrite8(burst | 0x01, bmdma + 0x1f); + } + return ata_sff_port_start(ap); +} + static struct scsi_host_template pdc202xx_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -313,7 +324,7 @@ static struct ata_port_operations pdc2026x_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_sff_port_start, + .port_start = pdc2026x_port_start, }; static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 2f1de6e..c68b241 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -270,7 +270,7 @@ static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) static void qs_error_handler(struct ata_port *ap) { qs_enter_reg_mode(ap); - ata_do_eh(ap, qs_prereset, ata_std_softreset, NULL, + ata_do_eh(ap, qs_prereset, NULL, sata_std_hardreset, ata_std_postreset); } diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 96fd526..b4c674d 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -832,16 +832,31 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc) struct ata_link *link = qc->dev->link; struct ata_port *ap = link->ap; u8 prot = qc->tf.protocol; - int is_atapi = (prot == ATA_PROT_ATAPI || - prot == ATA_PROT_ATAPI_NODATA || - prot == ATA_PROT_ATAPI_DMA); - - /* ATAPI commands completing with CHECK_SENSE cause various - * weird problems if other commands are active. PMP DMA CS - * errata doesn't cover all and HSM violation occurs even with - * only one other device active. Always run an ATAPI command - * by itself. - */ + + /* + * There is a bug in the chip: + * Port LRAM Causes the PRB/SGT Data to be Corrupted + * If the host issues a read request for LRAM and SActive registers + * while active commands are available in the port, PRB/SGT data in + * the LRAM can become corrupted. This issue applies only when + * reading from, but not writing to, the LRAM. + * + * Therefore, reading LRAM when there is no particular error [and + * other commands may be outstanding] is prohibited. + * + * To avoid this bug there are two situations where a command must run + * exclusive of any other commands on the port: + * + * - ATAPI commands which check the sense data + * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF + * set. + * + */ + int is_excl = (prot == ATA_PROT_ATAPI || + prot == ATA_PROT_ATAPI_NODATA || + prot == ATA_PROT_ATAPI_DMA || + (qc->flags & ATA_QCFLAG_RESULT_TF)); + if (unlikely(ap->excl_link)) { if (link == ap->excl_link) { if (ap->nr_active_links) @@ -849,7 +864,7 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_CLEAR_EXCL; } else return ATA_DEFER_PORT; - } else if (unlikely(is_atapi)) { + } else if (unlikely(is_excl)) { ap->excl_link = link; if (ap->nr_active_links) return ATA_DEFER_PORT; diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index a337b69..5f7e718 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -429,8 +429,8 @@ static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key, static void aes_crypt_copy(const u8 *in, u8 *out, u32 *key, struct cword *cword) { - u8 tmp[AES_BLOCK_SIZE * 2] - __attribute__ ((__aligned__(PADLOCK_ALIGNMENT))); + u8 buf[AES_BLOCK_SIZE * 2 + PADLOCK_ALIGNMENT - 1]; + u8 *tmp = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT); memcpy(tmp, in, AES_BLOCK_SIZE); padlock_xcrypt(tmp, out, key, cword); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 89df48f..fe6768a 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -16,6 +16,7 @@ #include <acpi/acpi.h> #include <linux/ide.h> #include <linux/pci.h> +#include <linux/dmi.h> #include <acpi/acpi_bus.h> #include <acpi/acnames.h> @@ -65,6 +66,37 @@ extern int ide_noacpi; extern int ide_noacpitfs; extern int ide_noacpionboot; +static bool ide_noacpi_psx; +static int no_acpi_psx(const struct dmi_system_id *id) +{ + ide_noacpi_psx = true; + printk(KERN_NOTICE"%s detected - disable ACPI _PSx.\n", id->ident); + return 0; +} + +static const struct dmi_system_id ide_acpi_dmi_table[] = { + /* Bug 9673. */ + /* We should check if this is because ACPI NVS isn't save/restored. */ + { + .callback = no_acpi_psx, + .ident = "HP nx9005", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies Ltd."), + DMI_MATCH(DMI_BIOS_VERSION, "KAM1.60") + }, + }, +}; + +static int ide_acpi_blacklist(void) +{ + static int done; + if (done) + return 0; + done = 1; + dmi_check_system(ide_acpi_dmi_table); + return 0; +} + /** * ide_get_dev_handle - finds acpi_handle and PCI device.function * @dev: device to locate @@ -623,7 +655,7 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) { int unit; - if (ide_noacpi) + if (ide_noacpi || ide_noacpi_psx) return; DEBPRINT("ENTER:\n"); @@ -668,6 +700,8 @@ void ide_acpi_init(ide_hwif_t *hwif) struct ide_acpi_drive_link *master; struct ide_acpi_drive_link *slave; + ide_acpi_blacklist(); + hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL); if (!hwif->acpidata) return; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index cef405d..bb9693d 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -612,12 +612,12 @@ u8 eighty_ninty_three (ide_drive_t *drive) printk(KERN_DEBUG "%s: skipping word 93 validity check\n", drive->name); + if (ide_dev_is_sata(id) && !ivb) + return 1; + if (hwif->cbl != ATA_CBL_PATA80 && !ivb) goto no_80w; - if (ide_dev_is_sata(id)) - return 1; - /* * FIXME: * - force bit13 (80c cable present) check also for !ivb devices diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 0895e75..0151d7f 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -1,7 +1,8 @@ /* - * linux/drivers/ide/pci/trm290.c Version 1.02 Mar. 18, 2000 + * linux/drivers/ide/pci/trm290.c Version 1.05 Dec. 26, 2007 * * Copyright (c) 1997-1998 Mark Lord + * Copyright (c) 2007 MontaVista Software, Inc. <source@mvista.com> * May be copied or modified under the terms of the GNU General Public License * * June 22, 2004 - get rid of check_region @@ -177,7 +178,7 @@ static void trm290_selectproc (ide_drive_t *drive) trm290_prepare_drive(drive, drive->using_dma); } -static void trm290_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command) { BUG_ON(HWGROUP(drive)->handler != NULL); /* paranoia check */ ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL); @@ -185,7 +186,7 @@ static void trm290_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) outb(command, IDE_COMMAND_REG); } -static int trm290_ide_dma_setup(ide_drive_t *drive) +static int trm290_dma_setup(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->hwgroup->rq; @@ -215,7 +216,7 @@ static int trm290_ide_dma_setup(ide_drive_t *drive) return 0; } -static void trm290_ide_dma_start(ide_drive_t *drive) +static void trm290_dma_start(ide_drive_t *drive) { } @@ -240,6 +241,14 @@ static int trm290_ide_dma_test_irq (ide_drive_t *drive) return (status == 0x00ff); } +static void trm290_dma_host_on(ide_drive_t *drive) +{ +} + +static void trm290_dma_host_off(ide_drive_t *drive) +{ +} + static void __devinit init_hwif_trm290(ide_hwif_t *hwif) { unsigned int cfgbase = 0; @@ -280,11 +289,13 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3); - hwif->dma_setup = &trm290_ide_dma_setup; - hwif->dma_exec_cmd = &trm290_ide_dma_exec_cmd; - hwif->dma_start = &trm290_ide_dma_start; - hwif->ide_dma_end = &trm290_ide_dma_end; - hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq; + hwif->dma_host_off = &trm290_dma_host_off; + hwif->dma_host_on = &trm290_dma_host_on; + hwif->dma_setup = &trm290_dma_setup; + hwif->dma_exec_cmd = &trm290_dma_exec_cmd; + hwif->dma_start = &trm290_dma_start; + hwif->ide_dma_end = &trm290_ide_dma_end; + hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq; hwif->selectproc = &trm290_selectproc; #if 1 diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 146d540..2886407 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -3041,7 +3041,6 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) int cnt; int req_cnt; int seg_cnt; - dma_addr_t dma_handle; u8 dir; ENTER("qla1280_32bit_start_scsi"); @@ -3050,6 +3049,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) cmd->cmnd[0]); /* Calculate number of entries and segments required. */ + req_cnt = 1; seg_cnt = scsi_dma_map(cmd); if (seg_cnt) { /* |