diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/staging/fbtft/fb_ili9320.c | 4 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_ili9325.c | 10 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_pcd8544.c | 4 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_ssd1289.c | 2 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_ssd1351.c | 2 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_tls8204.c | 2 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_uc1611.c | 12 | ||||
-rw-r--r-- | drivers/staging/fbtft/fb_watterott.c | 8 | ||||
-rw-r--r-- | drivers/staging/fbtft/fbtft-core.c | 24 | ||||
-rw-r--r-- | drivers/staging/fbtft/fbtft.h | 26 | ||||
-rw-r--r-- | drivers/staging/fbtft/fbtft_device.c | 22 |
11 files changed, 58 insertions, 58 deletions
diff --git a/drivers/staging/fbtft/fb_ili9320.c b/drivers/staging/fbtft/fb_ili9320.c index 6ff222d..278e4c7 100644 --- a/drivers/staging/fbtft/fb_ili9320.c +++ b/drivers/staging/fbtft/fb_ili9320.c @@ -29,7 +29,7 @@ #define DEFAULT_GAMMA "07 07 6 0 0 0 5 5 4 0\n" \ "07 08 4 7 5 1 2 0 7 7" -static unsigned read_devicecode(struct fbtft_par *par) +static unsigned int read_devicecode(struct fbtft_par *par) { int ret; u8 rxbuf[8] = {0, }; @@ -41,7 +41,7 @@ static unsigned read_devicecode(struct fbtft_par *par) static int init_display(struct fbtft_par *par) { - unsigned devcode; + unsigned int devcode; par->fbtftops.reset(par); diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c index fdf98d3..c31e2e0 100644 --- a/drivers/staging/fbtft/fb_ili9325.c +++ b/drivers/staging/fbtft/fb_ili9325.c @@ -32,26 +32,26 @@ #define DEFAULT_GAMMA "0F 00 7 2 0 0 6 5 4 1\n" \ "04 16 2 7 6 3 2 1 7 7" -static unsigned bt = 6; /* VGL=Vci*4 , VGH=Vci*4 */ +static unsigned int bt = 6; /* VGL=Vci*4 , VGH=Vci*4 */ module_param(bt, uint, 0); MODULE_PARM_DESC(bt, "Sets the factor used in the step-up circuits"); -static unsigned vc = 0x03; /* Vci1=Vci*0.80 */ +static unsigned int vc = 0x03; /* Vci1=Vci*0.80 */ module_param(vc, uint, 0); MODULE_PARM_DESC(vc, "Sets the ratio factor of Vci to generate the reference voltages Vci1"); -static unsigned vrh = 0x0d; /* VREG1OUT=Vci*1.85 */ +static unsigned int vrh = 0x0d; /* VREG1OUT=Vci*1.85 */ module_param(vrh, uint, 0); MODULE_PARM_DESC(vrh, "Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT"); -static unsigned vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */ +static unsigned int vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */ module_param(vdv, uint, 0); MODULE_PARM_DESC(vdv, "Select the factor of VREG1OUT to set the amplitude of Vcom"); -static unsigned vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */ +static unsigned int vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */ module_param(vcm, uint, 0); MODULE_PARM_DESC(vcm, "Set the internal VcomH voltage"); diff --git a/drivers/staging/fbtft/fb_pcd8544.c b/drivers/staging/fbtft/fb_pcd8544.c index a6b4332..a4710dc 100644 --- a/drivers/staging/fbtft/fb_pcd8544.c +++ b/drivers/staging/fbtft/fb_pcd8544.c @@ -32,11 +32,11 @@ #define TXBUFLEN (84 * 6) #define DEFAULT_GAMMA "40" /* gamma controls the contrast in this driver */ -static unsigned tc; +static unsigned int tc; module_param(tc, uint, 0); MODULE_PARM_DESC(tc, "TC[1:0] Temperature coefficient: 0-3 (default: 0)"); -static unsigned bs = 4; +static unsigned int bs = 4; module_param(bs, uint, 0); MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)"); diff --git a/drivers/staging/fbtft/fb_ssd1289.c b/drivers/staging/fbtft/fb_ssd1289.c index 1162c08..5d5f280 100644 --- a/drivers/staging/fbtft/fb_ssd1289.c +++ b/drivers/staging/fbtft/fb_ssd1289.c @@ -29,7 +29,7 @@ #define DEFAULT_GAMMA "02 03 2 5 7 7 4 2 4 2\n" \ "02 03 2 5 7 5 4 2 4 2" -static unsigned reg11 = 0x6040; +static unsigned int reg11 = 0x6040; module_param(reg11, uint, 0); MODULE_PARM_DESC(reg11, "Register 11h value"); diff --git a/drivers/staging/fbtft/fb_ssd1351.c b/drivers/staging/fbtft/fb_ssd1351.c index cef33e4..8267bbbc 100644 --- a/drivers/staging/fbtft/fb_ssd1351.c +++ b/drivers/staging/fbtft/fb_ssd1351.c @@ -66,7 +66,7 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) static int set_var(struct fbtft_par *par) { - unsigned remap; + unsigned int remap; if (par->fbtftops.init_display != init_display) { /* don't risk messing up register A0h */ diff --git a/drivers/staging/fbtft/fb_tls8204.c b/drivers/staging/fbtft/fb_tls8204.c index 2183f98..545f7cb 100644 --- a/drivers/staging/fbtft/fb_tls8204.c +++ b/drivers/staging/fbtft/fb_tls8204.c @@ -35,7 +35,7 @@ /* gamma is used to control contrast in this driver */ #define DEFAULT_GAMMA "40" -static unsigned bs = 4; +static unsigned int bs = 4; module_param(bs, uint, 0); MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)"); diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c index e87401a..b33b73f 100644 --- a/drivers/staging/fbtft/fb_uc1611.c +++ b/drivers/staging/fbtft/fb_uc1611.c @@ -41,30 +41,30 @@ */ /* BR -> actual ratio: 0-3 -> 5, 10, 11, 13 */ -static unsigned ratio = 2; +static unsigned int ratio = 2; module_param(ratio, uint, 0); MODULE_PARM_DESC(ratio, "BR[1:0] Bias voltage ratio: 0-3 (default: 2)"); -static unsigned gain = 3; +static unsigned int gain = 3; module_param(gain, uint, 0); MODULE_PARM_DESC(gain, "GN[1:0] Bias voltage gain: 0-3 (default: 3)"); -static unsigned pot = 16; +static unsigned int pot = 16; module_param(pot, uint, 0); MODULE_PARM_DESC(pot, "PM[6:0] Bias voltage pot.: 0-63 (default: 16)"); /* TC -> % compensation per deg C: 0-3 -> -.05, -.10, -.015, -.20 */ -static unsigned temp; +static unsigned int temp; module_param(temp, uint, 0); MODULE_PARM_DESC(temp, "TC[1:0] Temperature compensation: 0-3 (default: 0)"); /* PC[1:0] -> LCD capacitance: 0-3 -> <20nF, 20-28 nF, 29-40 nF, 40-56 nF */ -static unsigned load = 1; +static unsigned int load = 1; module_param(load, uint, 0); MODULE_PARM_DESC(load, "PC[1:0] Panel Loading: 0-3 (default: 1)"); /* PC[3:2] -> V_LCD: 0, 1, 3 -> ext., int. with ratio = 5, int. standard */ -static unsigned pump = 3; +static unsigned int pump = 3; module_param(pump, uint, 0); MODULE_PARM_DESC(pump, "PC[3:2] Pump control: 0,1,3 (default: 3)"); diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c index f8cb610..a52e28a 100644 --- a/drivers/staging/fbtft/fb_watterott.c +++ b/drivers/staging/fbtft/fb_watterott.c @@ -67,7 +67,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...) static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) { - unsigned start_line, end_line; + unsigned int start_line, end_line; u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset); u16 *pos = par->txbuf.buf + 1; u16 *buf16 = par->txbuf.buf + 10; @@ -104,7 +104,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len) { - unsigned start_line, end_line; + unsigned int start_line, end_line; u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset); u16 *pos = par->txbuf.buf + 1; u8 *buf8 = par->txbuf.buf + 10; @@ -137,7 +137,7 @@ static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len) return 0; } -static unsigned firmware_version(struct fbtft_par *par) +static unsigned int firmware_version(struct fbtft_par *par) { u8 rxbuf[4] = {0, }; @@ -152,7 +152,7 @@ static unsigned firmware_version(struct fbtft_par *par) static int init_display(struct fbtft_par *par) { int ret; - unsigned version; + unsigned int version; u8 save_mode; /* enable SPI interface by having CS and MOSI low during reset */ diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index ce4fd37..d9046162 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -341,8 +341,8 @@ static void fbtft_reset(struct fbtft_par *par) mdelay(120); } -static void fbtft_update_display(struct fbtft_par *par, unsigned start_line, - unsigned end_line) +static void fbtft_update_display(struct fbtft_par *par, unsigned int start_line, + unsigned int end_line) { size_t offset, len; ktime_t ts_start, ts_end; @@ -435,10 +435,10 @@ static void fbtft_mkdirty(struct fb_info *info, int y, int height) static void fbtft_deferred_io(struct fb_info *info, struct list_head *pagelist) { struct fbtft_par *par = info->par; - unsigned dirty_lines_start, dirty_lines_end; + unsigned int dirty_lines_start, dirty_lines_end; struct page *page; unsigned long index; - unsigned y_low = 0, y_high = 0; + unsigned int y_low = 0, y_high = 0; int count = 0; spin_lock(&par->dirty_lock); @@ -526,18 +526,18 @@ static ssize_t fbtft_fb_write(struct fb_info *info, const char __user *buf, } /* from pxafb.c */ -static unsigned int chan_to_field(unsigned chan, struct fb_bitfield *bf) +static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) { chan &= 0xffff; chan >>= 16 - bf->length; return chan << bf->offset; } -static int fbtft_fb_setcolreg(unsigned regno, unsigned red, unsigned green, - unsigned blue, unsigned transp, +static int fbtft_fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, + unsigned int blue, unsigned int transp, struct fb_info *info) { - unsigned val; + unsigned int val; int ret = 1; dev_dbg(info->dev, @@ -654,11 +654,11 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, u8 *vmem = NULL; void *txbuf = NULL; void *buf = NULL; - unsigned width; - unsigned height; + unsigned int width; + unsigned int height; int txbuflen = display->txbuflen; - unsigned bpp = display->bpp; - unsigned fps = display->fps; + unsigned int bpp = display->bpp; + unsigned int fps = display->fps; int vmem_size, i; int *init_sequence = display->init_sequence; char *gamma = display->gamma; diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h index d3bc394..89c4b5b 100644 --- a/drivers/staging/fbtft/fbtft.h +++ b/drivers/staging/fbtft/fbtft.h @@ -38,7 +38,7 @@ */ struct fbtft_gpio { char name[FBTFT_GPIO_NAME_SIZE]; - unsigned gpio; + unsigned int gpio; }; struct fbtft_par; @@ -79,7 +79,7 @@ struct fbtft_ops { void (*reset)(struct fbtft_par *par); void (*mkdirty)(struct fb_info *info, int from, int to); void (*update_display)(struct fbtft_par *par, - unsigned start_line, unsigned end_line); + unsigned int start_line, unsigned int end_line); int (*init_display)(struct fbtft_par *par); int (*blank)(struct fbtft_par *par, bool on); @@ -115,14 +115,14 @@ struct fbtft_ops { * This structure is not stored by FBTFT except for init_sequence. */ struct fbtft_display { - unsigned width; - unsigned height; - unsigned regwidth; - unsigned buswidth; - unsigned backlight; + unsigned int width; + unsigned int height; + unsigned int regwidth; + unsigned int buswidth; + unsigned int backlight; struct fbtft_ops fbtftops; - unsigned bpp; - unsigned fps; + unsigned int bpp; + unsigned int fps; int txbuflen; int *init_sequence; char *gamma; @@ -146,9 +146,9 @@ struct fbtft_display { struct fbtft_platform_data { struct fbtft_display display; const struct fbtft_gpio *gpios; - unsigned rotate; + unsigned int rotate; bool bgr; - unsigned fps; + unsigned int fps; int txbuflen; u8 startbyte; char *gamma; @@ -216,8 +216,8 @@ struct fbtft_par { u8 startbyte; struct fbtft_ops fbtftops; spinlock_t dirty_lock; - unsigned dirty_lines_start; - unsigned dirty_lines_end; + unsigned int dirty_lines_start; + unsigned int dirty_lines_end; struct { int reset; int dc; diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c index e4a355a..4d1f1e9 100644 --- a/drivers/staging/fbtft/fbtft_device.c +++ b/drivers/staging/fbtft/fbtft_device.c @@ -32,20 +32,20 @@ static char *name; module_param(name, charp, 0); MODULE_PARM_DESC(name, "Devicename (required). name=list => list all supported devices."); -static unsigned rotate; +static unsigned int rotate; module_param(rotate, uint, 0); MODULE_PARM_DESC(rotate, "Angle to rotate display counter clockwise: 0, 90, 180, 270"); -static unsigned busnum; +static unsigned int busnum; module_param(busnum, uint, 0); MODULE_PARM_DESC(busnum, "SPI bus number (default=0)"); -static unsigned cs; +static unsigned int cs; module_param(cs, uint, 0); MODULE_PARM_DESC(cs, "SPI chip select (default=0)"); -static unsigned speed; +static unsigned int speed; module_param(speed, uint, 0); MODULE_PARM_DESC(speed, "SPI speed (override device default)"); @@ -58,7 +58,7 @@ module_param(gpios, charp, 0); MODULE_PARM_DESC(gpios, "List of gpios. Comma separated with the form: reset:23,dc:24 (when overriding the default, all gpios must be specified)"); -static unsigned fps; +static unsigned int fps; module_param(fps, uint, 0); MODULE_PARM_DESC(fps, "Frames per second (override driver default)"); @@ -76,7 +76,7 @@ module_param(bgr, int, 0); MODULE_PARM_DESC(bgr, "BGR bit (supported by some drivers)."); -static unsigned startbyte; +static unsigned int startbyte; module_param(startbyte, uint, 0); MODULE_PARM_DESC(startbyte, "Sets the Start byte used by some SPI displays."); @@ -84,15 +84,15 @@ static bool custom; module_param(custom, bool, 0); MODULE_PARM_DESC(custom, "Add a custom display device. Use speed= argument to make it a SPI device, else platform_device"); -static unsigned width; +static unsigned int width; module_param(width, uint, 0); MODULE_PARM_DESC(width, "Display width, used with the custom argument"); -static unsigned height; +static unsigned int height; module_param(height, uint, 0); MODULE_PARM_DESC(height, "Display height, used with the custom argument"); -static unsigned buswidth = 8; +static unsigned int buswidth = 8; module_param(buswidth, uint, 0); MODULE_PARM_DESC(buswidth, "Display bus width, used with the custom argument"); @@ -106,7 +106,7 @@ module_param(debug, ulong, 0); MODULE_PARM_DESC(debug, "level: 0-7 (the remaining 29 bits is for advanced usage)"); -static unsigned verbose = 3; +static unsigned int verbose = 3; module_param(verbose, uint, 0); MODULE_PARM_DESC(verbose, "0 silent, >0 show gpios, >1 show devices, >2 show devices before (default=3)"); @@ -1346,7 +1346,7 @@ static void pr_p_devices(void) } #ifdef MODULE -static void fbtft_device_spi_delete(struct spi_master *master, unsigned cs) +static void fbtft_device_spi_delete(struct spi_master *master, unsigned int cs) { struct device *dev; char str[32]; |