diff options
Diffstat (limited to 'drivers')
138 files changed, 7779 insertions, 1925 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 90acb32..ed6f89b 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -379,6 +379,26 @@ static void quirk_ati_exploding_mce(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); /* + * In the AMD NL platform, this device ([1022:7912]) has a class code of + * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will + * claim it. + * But the dwc3 driver is a more specific driver for this device, and we'd + * prefer to use it instead of xhci. To prevent xhci from claiming the + * device, change the class code to 0x0c03fe, which the PCI r3.0 spec + * defines as "USB device (not host controller)". The dwc3 driver can then + * claim it based on its Vendor and Device ID. + */ +static void quirk_amd_nl_class(struct pci_dev *pdev) +{ + /* + * Use 'USB Device' (0x0c03fe) instead of PCI header provided + */ + pdev->class = 0x0c03fe; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, + quirk_amd_nl_class); + +/* * Let's make the southbridge information explicit instead * of having to worry about people probing the ACPI areas, * for example.. (Yes, it happens, and if you read the wrong diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index f091576..08f2da2 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -60,7 +60,7 @@ EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) { - struct omap_usb *phy = phy_to_omapusb(otg->phy); + struct omap_usb *phy = phy_to_omapusb(otg->usb_phy); if (!phy->comparator) return -ENODEV; @@ -70,7 +70,7 @@ static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) static int omap_usb_start_srp(struct usb_otg *otg) { - struct omap_usb *phy = phy_to_omapusb(otg->phy); + struct omap_usb *phy = phy_to_omapusb(otg->usb_phy); if (!phy->comparator) return -ENODEV; @@ -80,11 +80,9 @@ static int omap_usb_start_srp(struct usb_otg *otg) static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) { - struct usb_phy *phy = otg->phy; - otg->host = host; if (!host) - phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; return 0; } @@ -92,11 +90,9 @@ static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) static int omap_usb_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { - struct usb_phy *phy = otg->phy; - otg->gadget = gadget; if (!gadget) - phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; return 0; } @@ -255,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev) otg->set_vbus = omap_usb_set_vbus; if (phy_data->flags & OMAP_USB2_HAS_START_SRP) otg->start_srp = omap_usb_start_srp; - otg->phy = &phy->phy; + otg->usb_phy = &phy->phy; platform_set_drvdata(pdev, phy); pm_runtime_enable(phy->dev); diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 7b04bef..e2698d29 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -606,7 +606,7 @@ static int twl4030_set_peripheral(struct usb_otg *otg, otg->gadget = gadget; if (!gadget) - otg->phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; return 0; } @@ -618,7 +618,7 @@ static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) otg->host = host; if (!host) - otg->phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; return 0; } @@ -676,7 +676,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) twl->phy.otg = otg; twl->phy.type = USB_PHY_TYPE_USB2; - otg->phy = &twl->phy; + otg->usb_phy = &twl->phy; otg->set_host = twl4030_set_host; otg->set_peripheral = twl4030_set_peripheral; diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index ea40626..5bbfcc7 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -161,7 +161,8 @@ struct hw_bank { * @test_mode: the selected test mode * @platdata: platform specific information supplied by parent device * @vbus_active: is VBUS active - * @transceiver: pointer to USB PHY, if any + * @phy: pointer to PHY, if any + * @usb_phy: pointer to USB PHY, if any and if using the USB PHY framework * @hcd: pointer to usb_hcd for ehci host driver * @debugfs: root dentry for this controller in debugfs * @id_event: indicates there is an id event, and handled at ci_otg_work @@ -177,6 +178,7 @@ struct ci_hdrc { struct ci_role_driver *roles[CI_ROLE_END]; enum ci_role role; bool is_otg; + struct usb_otg otg; struct otg_fsm fsm; struct ci_otg_fsm_timer_list *fsm_timer; struct work_struct work; @@ -201,7 +203,9 @@ struct ci_hdrc { struct ci_hdrc_platform_data *platdata; int vbus_active; - struct usb_phy *transceiver; + struct phy *phy; + /* old usb_phy interface */ + struct usb_phy *usb_phy; struct usb_hcd *hcd; struct dentry *debugfs; bool id_event; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index a7ab0f1..6f8b1b1 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -147,7 +147,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) goto err_clk; } - pdata.phy = data->phy; + pdata.usb_phy = data->phy; if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX) pdata.flags |= CI_HDRC_IMX28_WRITE_FIX; diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index 4935ac3..3edf969 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -26,15 +26,15 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event) dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n"); writel(0, USB_AHBBURST); writel(0, USB_AHBMODE); - usb_phy_init(ci->transceiver); + usb_phy_init(ci->usb_phy); break; case CI_HDRC_CONTROLLER_STOPPED_EVENT: dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n"); /* - * Put the transceiver in non-driving mode. Otherwise host + * Put the phy in non-driving mode. Otherwise host * may not detect soft-disconnection. */ - usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN); + usb_phy_notify_disconnect(ci->usb_phy, USB_SPEED_UNKNOWN); break; default: dev_dbg(dev, "unknown ci_hdrc event\n"); @@ -68,7 +68,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) if (IS_ERR(phy)) return PTR_ERR(phy); - ci_hdrc_msm_platdata.phy = phy; + ci_hdrc_msm_platdata.usb_phy = phy; plat_ci = ci_hdrc_add_device(&pdev->dev, pdev->resource, pdev->num_resources, diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 9bdc6bd..60578d9 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -47,6 +47,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/module.h> #include <linux/idr.h> @@ -299,6 +300,49 @@ static void hw_phymode_configure(struct ci_hdrc *ci) } /** + * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy + * interfaces + * @ci: the controller + * + * This function returns an error code if the phy failed to init + */ +static int _ci_usb_phy_init(struct ci_hdrc *ci) +{ + int ret; + + if (ci->phy) { + ret = phy_init(ci->phy); + if (ret) + return ret; + + ret = phy_power_on(ci->phy); + if (ret) { + phy_exit(ci->phy); + return ret; + } + } else { + ret = usb_phy_init(ci->usb_phy); + } + + return ret; +} + +/** + * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy + * interfaces + * @ci: the controller + */ +static void ci_usb_phy_exit(struct ci_hdrc *ci) +{ + if (ci->phy) { + phy_power_off(ci->phy); + phy_exit(ci->phy); + } else { + usb_phy_shutdown(ci->usb_phy); + } +} + +/** * ci_usb_phy_init: initialize phy according to different phy type * @ci: the controller * @@ -312,7 +356,7 @@ static int ci_usb_phy_init(struct ci_hdrc *ci) case USBPHY_INTERFACE_MODE_UTMI: case USBPHY_INTERFACE_MODE_UTMIW: case USBPHY_INTERFACE_MODE_HSIC: - ret = usb_phy_init(ci->transceiver); + ret = _ci_usb_phy_init(ci); if (ret) return ret; hw_phymode_configure(ci); @@ -320,12 +364,12 @@ static int ci_usb_phy_init(struct ci_hdrc *ci) case USBPHY_INTERFACE_MODE_ULPI: case USBPHY_INTERFACE_MODE_SERIAL: hw_phymode_configure(ci); - ret = usb_phy_init(ci->transceiver); + ret = _ci_usb_phy_init(ci); if (ret) return ret; break; default: - ret = usb_phy_init(ci->transceiver); + ret = _ci_usb_phy_init(ci); } return ret; @@ -605,23 +649,26 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENODEV; } - if (ci->platdata->phy) - ci->transceiver = ci->platdata->phy; - else - ci->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); - - if (IS_ERR(ci->transceiver)) { - ret = PTR_ERR(ci->transceiver); - /* - * if -ENXIO is returned, it means PHY layer wasn't - * enabled, so it makes no sense to return -EPROBE_DEFER - * in that case, since no PHY driver will ever probe. - */ - if (ret == -ENXIO) - return ret; + if (ci->platdata->phy) { + ci->phy = ci->platdata->phy; + } else if (ci->platdata->usb_phy) { + ci->usb_phy = ci->platdata->usb_phy; + } else { + ci->phy = devm_phy_get(dev, "usb-phy"); + ci->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + + /* if both generic PHY and USB PHY layers aren't enabled */ + if (PTR_ERR(ci->phy) == -ENOSYS && + PTR_ERR(ci->usb_phy) == -ENXIO) + return -ENXIO; + + if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) + return -EPROBE_DEFER; - dev_err(dev, "no usb2 phy configured\n"); - return -EPROBE_DEFER; + if (IS_ERR(ci->phy)) + ci->phy = NULL; + else if (IS_ERR(ci->usb_phy)) + ci->usb_phy = NULL; } ret = ci_usb_phy_init(ci); @@ -728,7 +775,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) stop: ci_role_destroy(ci); deinit_phy: - usb_phy_shutdown(ci->transceiver); + ci_usb_phy_exit(ci); return ret; } @@ -741,7 +788,7 @@ static int ci_hdrc_remove(struct platform_device *pdev) free_irq(ci->irq, ci); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); - usb_phy_shutdown(ci->transceiver); + ci_usb_phy_exit(ci); return 0; } diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 795d653..268e423 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -220,7 +220,7 @@ static int ci_otg_show(struct seq_file *s, void *unused) /* ------ State ----- */ seq_printf(s, "OTG state: %s\n\n", - usb_otg_state_string(ci->transceiver->state)); + usb_otg_state_string(ci->otg.state)); /* ------ State Machine Variables ----- */ seq_printf(s, "a_bus_drop: %d\n", fsm->a_bus_drop); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 33027ab..48731d0 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -98,8 +98,11 @@ static int host_start(struct ci_hdrc *ci) hcd->has_tt = 1; hcd->power_budget = ci->platdata->power_budget; - hcd->usb_phy = ci->transceiver; hcd->tpl_support = ci->platdata->tpl_support; + if (ci->phy) + hcd->phy = ci->phy; + else + hcd->usb_phy = ci->usb_phy; ehci = hcd_to_ehci(hcd); ehci->caps = ci->hw_bank.cap; @@ -117,10 +120,11 @@ static int host_start(struct ci_hdrc *ci) if (ret) { goto put_hcd; } else { - struct usb_otg *otg = ci->transceiver->otg; + struct usb_otg *otg = &ci->otg; ci->hcd = hcd; - if (otg) { + + if (ci_otg_is_fsm_mode(ci)) { otg->host = &hcd->self; hcd->self.otg_port = 1; } diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index e683595..368cc8e 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -328,7 +328,7 @@ static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator) set_tmout(ci, indicator); /* only vbus fall below B_sess_vld in b_idle state */ - if (ci->transceiver->state == OTG_STATE_B_IDLE) + if (ci->fsm.otg->state == OTG_STATE_B_IDLE) ci_otg_queue_work(ci); } @@ -582,11 +582,11 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) * when there is no gadget class driver */ if (ci->fsm.id && !(ci->driver) && - ci->transceiver->state < OTG_STATE_A_IDLE) + ci->fsm.otg->state < OTG_STATE_A_IDLE) return 0; if (otg_statemachine(&ci->fsm)) { - if (ci->transceiver->state == OTG_STATE_A_IDLE) { + if (ci->fsm.otg->state == OTG_STATE_A_IDLE) { /* * Further state change for cases: * a_idle to b_idle; or @@ -600,7 +600,7 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) ci_otg_queue_work(ci); if (ci->id_event) ci->id_event = false; - } else if (ci->transceiver->state == OTG_STATE_B_IDLE) { + } else if (ci->fsm.otg->state == OTG_STATE_B_IDLE) { if (ci->fsm.b_sess_vld) { ci->fsm.power_up = 0; /* @@ -627,7 +627,7 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci) otg_bsess_vld = hw_read_otgsc(ci, OTGSC_BSV); port_conn = hw_read(ci, OP_PORTSC, PORTSC_CCS); - switch (ci->transceiver->state) { + switch (ci->fsm.otg->state) { case OTG_STATE_A_WAIT_BCON: if (port_conn) { fsm->b_conn = 1; @@ -778,20 +778,17 @@ void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci) int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) { int retval = 0; - struct usb_otg *otg; - otg = devm_kzalloc(ci->dev, - sizeof(struct usb_otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; + if (ci->phy) + ci->otg.phy = ci->phy; + else + ci->otg.usb_phy = ci->usb_phy; - otg->phy = ci->transceiver; - otg->gadget = &ci->gadget; - ci->fsm.otg = otg; - ci->transceiver->otg = ci->fsm.otg; + ci->otg.gadget = &ci->gadget; + ci->fsm.otg = &ci->otg; ci->fsm.power_up = 1; ci->fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0; - ci->transceiver->state = OTG_STATE_UNDEFINED; + ci->fsm.otg->state = OTG_STATE_UNDEFINED; ci->fsm.ops = &ci_otg_ops; mutex_init(&ci->fsm.lock); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 0444d3f..bdaa7ba 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -692,10 +692,8 @@ __acquires(ci->lock) int retval; spin_unlock(&ci->lock); - if (ci->gadget.speed != USB_SPEED_UNKNOWN) { - if (ci->driver) - ci->driver->disconnect(&ci->gadget); - } + if (ci->gadget.speed != USB_SPEED_UNKNOWN) + usb_gadget_udc_reset(&ci->gadget, ci->driver); retval = _gadget_stop_activity(&ci->gadget); if (retval) @@ -709,8 +707,6 @@ __acquires(ci->lock) if (ci->status == NULL) retval = -ENOMEM; - usb_gadget_set_state(&ci->gadget, USB_STATE_DEFAULT); - done: spin_lock(&ci->lock); @@ -1519,8 +1515,8 @@ static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma) { struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); - if (ci->transceiver) - return usb_phy_set_power(ci->transceiver, ma); + if (ci->usb_phy) + return usb_phy_set_power(ci->usb_phy, ma); return -ENOTSUPP; } @@ -1544,8 +1540,7 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) static int ci_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); -static int ci_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver); +static int ci_udc_stop(struct usb_gadget *gadget); /** * Device operations part of the API to the USB controller hardware, * which don't involve endpoints (or i/o) @@ -1682,8 +1677,7 @@ static int ci_udc_start(struct usb_gadget *gadget, /** * ci_udc_stop: unregister a gadget driver */ -static int ci_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int ci_udc_stop(struct usb_gadget *gadget) { struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); unsigned long flags; diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index 98e8340..c6b35b7 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -124,10 +124,10 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) { state_changed = 1; - if (fsm->otg->phy->state == new_state) + if (fsm->otg->state == new_state) return 0; VDBG("Set state: %s\n", usb_otg_state_string(new_state)); - otg_leave_state(fsm, fsm->otg->phy->state); + otg_leave_state(fsm, fsm->otg->state); switch (new_state) { case OTG_STATE_B_IDLE: otg_drv_vbus(fsm, 0); @@ -236,7 +236,7 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) break; } - fsm->otg->phy->state = new_state; + fsm->otg->state = new_state; return 0; } @@ -247,7 +247,7 @@ int otg_statemachine(struct otg_fsm *fsm) mutex_lock(&fsm->lock); - state = fsm->otg->phy->state; + state = fsm->otg->state; state_changed = 0; /* State machine state change judgement */ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index a6efb41..2f2118f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2650,7 +2650,7 @@ int usb_add_hcd(struct usb_hcd *hcd, } } - if (IS_ENABLED(CONFIG_GENERIC_PHY)) { + if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) { struct phy *phy = phy_get(hcd->self.controller, "usb"); if (IS_ERR(phy)) { @@ -2670,6 +2670,7 @@ int usb_add_hcd(struct usb_hcd *hcd, goto err_phy; } hcd->phy = phy; + hcd->remove_phy = 1; } } @@ -2816,7 +2817,7 @@ err_allocate_root_hub: err_register_bus: hcd_buffer_destroy(hcd); err_create_buf: - if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->phy) { + if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) { phy_power_off(hcd->phy); phy_exit(hcd->phy); phy_put(hcd->phy); @@ -2900,7 +2901,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) usb_deregister_bus(&hcd->self); hcd_buffer_destroy(hcd); - if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->phy) { + if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) { phy_power_off(hcd->phy); phy_exit(hcd->phy); phy_put(hcd->phy); diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index f93807b..b323c4c 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -1,6 +1,6 @@ config USB_DWC2 - bool "DesignWare USB2 DRD Core Support" - depends on USB + tristate "DesignWare USB2 DRD Core Support" + depends on USB || USB_GADGET help Say Y here if your system has a Dual Role Hi-Speed USB controller based on the DesignWare HSOTG IP Core. @@ -10,49 +10,61 @@ config USB_DWC2 bus interface module (if you have a PCI bus system) will be called dwc2_pci.ko, and the platform interface module (for controllers directly connected to the CPU) will be called - dwc2_platform.ko. For gadget mode, there will be a single - module called dwc2_gadget.ko. - - NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The - host and gadget drivers are still currently separate drivers. - There are plans to merge the dwc2_gadget driver with the dwc2 - host driver in the near future to create a dual-role driver. + dwc2_platform.ko. For all modes(host, gadget and dual-role), there + will be an additional module named dwc2.ko. if USB_DWC2 +choice + bool "DWC2 Mode Selection" + default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET) + default USB_DWC2_HOST if (USB && !USB_GADGET) + default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET) + config USB_DWC2_HOST - tristate "Host only mode" + bool "Host only mode" depends on USB help The Designware USB2.0 high-speed host controller - integrated into many SoCs. + integrated into many SoCs. Select this option if you want the + driver to operate in Host-only mode. -config USB_DWC2_PLATFORM - bool "DWC2 Platform" - depends on USB_DWC2_HOST - default USB_DWC2_HOST +comment "Gadget/Dual-role mode requires USB Gadget support to be enabled" + +config USB_DWC2_PERIPHERAL + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_DWC2 help - The Designware USB2.0 platform interface module for - controllers directly connected to the CPU. This is only - used for host mode. + The Designware USB2.0 high-speed gadget controller + integrated into many SoCs. Select this option if you want the + driver to operate in Peripheral-only mode. This option requires + USB_GADGET to be enabled. + +config USB_DWC2_DUAL_ROLE + bool "Dual Role mode" + depends on (USB=y || USB=USB_DWC2) && (USB_GADGET=y || USB_GADGET=USB_DWC2) + help + Select this option if you want the driver to work in a dual-role + mode. In this mode both host and gadget features are enabled, and + the role will be determined by the cable that gets plugged-in. This + option requires USB_GADGET to be enabled. +endchoice + +config USB_DWC2_PLATFORM + tristate "DWC2 Platform" + default USB_DWC2_HOST || USB_DWC2_PERIPHERAL + help + The Designware USB2.0 platform interface module for + controllers directly connected to the CPU. config USB_DWC2_PCI - bool "DWC2 PCI" + tristate "DWC2 PCI" depends on USB_DWC2_HOST && PCI default USB_DWC2_HOST help The Designware USB2.0 PCI interface module for controllers connected to a PCI bus. This is only used for host mode. -comment "Gadget mode requires USB Gadget support to be enabled" - -config USB_DWC2_PERIPHERAL - tristate "Gadget only mode" - depends on USB_GADGET - help - The Designware USB2.0 high-speed gadget controller - integrated into many SoCs. - config USB_DWC2_DEBUG bool "Enable Debugging Messages" help diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index b73d2a5..8f75267 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -1,28 +1,28 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG -obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o +obj-$(CONFIG_USB_DWC2) += dwc2.o dwc2-y := core.o core_intr.o -dwc2-y += hcd.o hcd_intr.o -dwc2-y += hcd_queue.o hcd_ddma.o + +ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += hcd.o hcd_intr.o + dwc2-y += hcd_queue.o hcd_ddma.o +endif + +ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += gadget.o +endif # NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to # this location and renamed gadget.c. When building for dynamically linked -# modules, dwc2_gadget.ko will get built for peripheral mode. For host mode, -# the core module will be dwc2.ko, the PCI bus interface module will called -# dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. -# At present the host and gadget driver will be separate drivers, but there -# are plans in the near future to create a dual-role driver. +# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role +# mode. The PCI bus interface module will called dwc2_pci.ko and the platform +# interface module will be called dwc2_platform.ko. ifneq ($(CONFIG_USB_DWC2_PCI),) - obj-$(CONFIG_USB_DWC2_HOST) += dwc2_pci.o + obj-$(CONFIG_USB_DWC2) += dwc2_pci.o dwc2_pci-y := pci.o endif -ifneq ($(CONFIG_USB_DWC2_PLATFORM),) - obj-$(CONFIG_USB_DWC2_HOST) += dwc2_platform.o - dwc2_platform-y := platform.o -endif - -obj-$(CONFIG_USB_DWC2_PERIPHERAL) += dwc2_gadget.o -dwc2_gadget-y := gadget.o +obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o +dwc2_platform-y := platform.o diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index d926945..7605850b 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -458,16 +458,6 @@ int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq) /* Clear the SRP success bit for FS-I2c */ hsotg->srp_success = 0; - if (irq >= 0) { - dev_dbg(hsotg->dev, "registering common handler for irq%d\n", - irq); - retval = devm_request_irq(hsotg->dev, irq, - dwc2_handle_common_intr, IRQF_SHARED, - dev_name(hsotg->dev), hsotg); - if (retval) - return retval; - } - /* Enable common interrupts */ dwc2_enable_common_interrupts(hsotg); diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 55c90c5..7a70a13 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -84,7 +84,7 @@ static const char * const s3c_hsotg_supply_names[] = { */ #define EP0_MPS_LIMIT 64 -struct s3c_hsotg; +struct dwc2_hsotg; struct s3c_hsotg_req; /** @@ -130,7 +130,7 @@ struct s3c_hsotg_req; struct s3c_hsotg_ep { struct usb_ep ep; struct list_head queue; - struct s3c_hsotg *parent; + struct dwc2_hsotg *parent; struct s3c_hsotg_req *req; struct dentry *debugfs; @@ -155,67 +155,6 @@ struct s3c_hsotg_ep { }; /** - * struct s3c_hsotg - driver state. - * @dev: The parent device supplied to the probe function - * @driver: USB gadget driver - * @phy: The otg phy transceiver structure for phy control. - * @uphy: The otg phy transceiver structure for old USB phy control. - * @plat: The platform specific configuration data. This can be removed once - * all SoCs support usb transceiver. - * @regs: The memory area mapped for accessing registers. - * @irq: The IRQ number we are using - * @supplies: Definition of USB power supplies - * @phyif: PHY interface width - * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. - * @num_of_eps: Number of available EPs (excluding EP0) - * @debug_root: root directrory for debugfs. - * @debug_file: main status file for debugfs. - * @debug_fifo: FIFO status file for debugfs. - * @ep0_reply: Request used for ep0 reply. - * @ep0_buff: Buffer for EP0 reply data, if needed. - * @ctrl_buff: Buffer for EP0 control requests. - * @ctrl_req: Request for EP0 control packets. - * @setup: NAK management for EP0 SETUP - * @last_rst: Time of last reset - * @eps: The endpoints being supplied to the gadget framework - */ -struct s3c_hsotg { - struct device *dev; - struct usb_gadget_driver *driver; - struct phy *phy; - struct usb_phy *uphy; - struct s3c_hsotg_plat *plat; - - spinlock_t lock; - - void __iomem *regs; - int irq; - struct clk *clk; - - struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; - - u32 phyif; - int fifo_mem; - unsigned int dedicated_fifos:1; - unsigned char num_of_eps; - u32 fifo_map; - - struct dentry *debug_root; - struct dentry *debug_file; - struct dentry *debug_fifo; - - struct usb_request *ep0_reply; - struct usb_request *ctrl_req; - u8 ep0_buff[8]; - u8 ctrl_buff[8]; - - struct usb_gadget gadget; - unsigned int setup; - unsigned long last_rst; - struct s3c_hsotg_ep *eps; -}; - -/** * struct s3c_hsotg_req - data transfer request * @req: The USB gadget request * @queue: The list of requests for the endpoint this is queued for. @@ -229,6 +168,7 @@ struct s3c_hsotg_req { unsigned char mapped; }; +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) #define call_gadget(_hs, _entry) \ do { \ if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ @@ -238,6 +178,9 @@ do { \ spin_lock(&_hs->lock); \ } \ } while (0) +#else +#define call_gadget(_hs, _entry) do {} while (0) +#endif struct dwc2_hsotg; struct dwc2_host_chan; @@ -495,11 +438,13 @@ struct dwc2_hw_params { * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic * and periodic schedules * + * These are common for both host and peripheral modes: + * * @dev: The struct device pointer * @regs: Pointer to controller regs - * @core_params: Parameters that define how the core should be configured * @hw_params: Parameters that were autodetected from the * hardware registers + * @core_params: Parameters that define how the core should be configured * @op_state: The operational State, during transitions (a_host=> * a_peripheral and b_device=>b_host) this may not match * the core, but allows the software to determine @@ -508,6 +453,8 @@ struct dwc2_hw_params { * - USB_DR_MODE_PERIPHERAL * - USB_DR_MODE_HOST * - USB_DR_MODE_OTG + * @lock: Spinlock that protects all the driver data structures + * @priv: Stores a pointer to the struct usb_hcd * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth * transfer are in process of being queued * @srp_success: Stores status of SRP request in the case of a FS PHY @@ -517,6 +464,9 @@ struct dwc2_hw_params { * interrupt * @wkp_timer: Timer object for handling Wakeup Detected interrupt * @lx_state: Lx state of connected device + * + * These are for host mode: + * * @flags: Flags for handling root port state changes * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. * Transfers associated with these QHs are not currently @@ -585,11 +535,31 @@ struct dwc2_hw_params { * @status_buf_dma: DMA address for status_buf * @start_work: Delayed work for handling host A-cable connection * @reset_work: Delayed work for handling a port reset - * @lock: Spinlock that protects all the driver data structures - * @priv: Stores a pointer to the struct usb_hcd * @otg_port: OTG port number * @frame_list: Frame list * @frame_list_dma: Frame list DMA address + * + * These are for peripheral mode: + * + * @driver: USB gadget driver + * @phy: The otg phy transceiver structure for phy control. + * @uphy: The otg phy transceiver structure for old USB phy control. + * @plat: The platform specific configuration data. This can be removed once + * all SoCs support usb transceiver. + * @supplies: Definition of USB power supplies + * @phyif: PHY interface width + * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. + * @num_of_eps: Number of available EPs (excluding EP0) + * @debug_root: Root directrory for debugfs. + * @debug_file: Main status file for debugfs. + * @debug_fifo: FIFO status file for debugfs. + * @ep0_reply: Request used for ep0 reply. + * @ep0_buff: Buffer for EP0 reply data, if needed. + * @ctrl_buff: Buffer for EP0 control requests. + * @ctrl_req: Request for EP0 control packets. + * @setup: NAK management for EP0 SETUP + * @last_rst: Time of last reset + * @eps: The endpoints being supplied to the gadget framework */ struct dwc2_hsotg { struct device *dev; @@ -601,6 +571,16 @@ struct dwc2_hsotg { enum usb_otg_state op_state; enum usb_dr_mode dr_mode; + struct phy *phy; + struct usb_phy *uphy; + struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; + + spinlock_t lock; + struct mutex init_mutex; + void *priv; + int irq; + struct clk *clk; + unsigned int queuing_high_bandwidth:1; unsigned int srp_success:1; @@ -609,6 +589,18 @@ struct dwc2_hsotg { struct timer_list wkp_timer; enum dwc2_lx_state lx_state; + struct dentry *debug_root; + struct dentry *debug_file; + struct dentry *debug_fifo; + + /* DWC OTG HW Release versions */ +#define DWC2_CORE_REV_2_71a 0x4f54271a +#define DWC2_CORE_REV_2_90a 0x4f54290a +#define DWC2_CORE_REV_2_92a 0x4f54292a +#define DWC2_CORE_REV_2_94a 0x4f54294a +#define DWC2_CORE_REV_3_00a 0x4f54300a + +#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) union dwc2_hcd_internal_flags { u32 d32; struct { @@ -655,19 +647,10 @@ struct dwc2_hsotg { struct delayed_work start_work; struct delayed_work reset_work; - spinlock_t lock; - void *priv; u8 otg_port; u32 *frame_list; dma_addr_t frame_list_dma; - /* DWC OTG HW Release versions */ -#define DWC2_CORE_REV_2_71a 0x4f54271a -#define DWC2_CORE_REV_2_90a 0x4f54290a -#define DWC2_CORE_REV_2_92a 0x4f54292a -#define DWC2_CORE_REV_2_94a 0x4f54294a -#define DWC2_CORE_REV_3_00a 0x4f54300a - #ifdef DEBUG u32 frrem_samples; u64 frrem_accum; @@ -686,6 +669,31 @@ struct dwc2_hsotg { u32 hfnum_other_samples_b; u64 hfnum_other_frrem_accum_b; #endif +#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */ + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Gadget structures */ + struct usb_gadget_driver *driver; + struct s3c_hsotg_plat *plat; + + u32 phyif; + int fifo_mem; + unsigned int dedicated_fifos:1; + unsigned char num_of_eps; + u32 fifo_map; + + struct usb_request *ep0_reply; + struct usb_request *ctrl_req; + u8 ep0_buff[8]; + u8 ctrl_buff[8]; + + struct usb_gadget gadget; + unsigned int enabled:1; + unsigned int connected:1; + unsigned int setup:1; + unsigned long last_rst; + struct s3c_hsotg_ep *eps; +#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ }; /* Reasons for halting a host channel */ @@ -955,4 +963,43 @@ extern void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg); */ extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg); +/* Gadget defines */ +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +extern int s3c_hsotg_remove(struct dwc2_hsotg *hsotg); +extern int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2); +extern int s3c_hsotg_resume(struct dwc2_hsotg *dwc2); +extern int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq); +extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2); +extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg); +extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2); +#else +static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int s3c_hsotg_resume(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) +{ return 0; } +static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2) {} +static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {} +static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {} +#endif + +#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg); +#else +static inline void dwc2_set_all_params(struct dwc2_core_params *params, int value) {} +static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {} +static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, + const struct dwc2_core_params *params) +{ return 0; } +#endif + #endif /* __DWC2_CORE_H__ */ diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index c93918b..ad43c5b 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -128,6 +128,9 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) dwc2_op_state_str(hsotg)); gotgctl = readl(hsotg->regs + GOTGCTL); + if (dwc2_is_device_mode(hsotg)) + s3c_hsotg_disconnect(hsotg); + if (hsotg->op_state == OTG_STATE_B_HOST) { hsotg->op_state = OTG_STATE_B_PERIPHERAL; } else { @@ -287,9 +290,11 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) * Release lock before scheduling workq as it holds spinlock during * scheduling. */ - spin_unlock(&hsotg->lock); - queue_work(hsotg->wq_otg, &hsotg->wf_otg); - spin_lock(&hsotg->lock); + if (hsotg->wq_otg) { + spin_unlock(&hsotg->lock); + queue_work(hsotg->wq_otg, &hsotg->wf_otg); + spin_lock(&hsotg->lock); + } /* Clear interrupt */ writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); @@ -312,6 +317,12 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) /* Clear interrupt */ writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); + + /* + * Report disconnect if there is any previous session established + */ + if (dwc2_is_device_mode(hsotg)) + s3c_hsotg_disconnect(hsotg); } /* diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 8b5c079..200168e 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -21,6 +21,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/debugfs.h> +#include <linux/mutex.h> #include <linux/seq_file.h> #include <linux/delay.h> #include <linux/io.h> @@ -36,6 +37,7 @@ #include <linux/platform_data/s3c-hsotg.h> #include "core.h" +#include "hw.h" /* conversion functions */ static inline struct s3c_hsotg_req *our_req(struct usb_request *req) @@ -48,9 +50,9 @@ static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep) return container_of(ep, struct s3c_hsotg_ep, ep); } -static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget) +static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget) { - return container_of(gadget, struct s3c_hsotg, gadget); + return container_of(gadget, struct dwc2_hsotg, gadget); } static inline void __orr32(void __iomem *ptr, u32 val) @@ -64,7 +66,7 @@ static inline void __bic32(void __iomem *ptr, u32 val) } /* forward decleration of functions */ -static void s3c_hsotg_dump(struct s3c_hsotg *hsotg); +static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg); /** * using_dma - return the DMA status of the driver. @@ -85,7 +87,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg); * * Until this issue is sorted out, we always return 'false'. */ -static inline bool using_dma(struct s3c_hsotg *hsotg) +static inline bool using_dma(struct dwc2_hsotg *hsotg) { return false; /* support is not complete */ } @@ -95,7 +97,7 @@ static inline bool using_dma(struct s3c_hsotg *hsotg) * @hsotg: The device state * @ints: A bitmask of the interrupts to enable */ -static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) +static void s3c_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints) { u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; @@ -113,7 +115,7 @@ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) * @hsotg: The device state * @ints: A bitmask of the interrupts to enable */ -static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints) +static void s3c_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints) { u32 gsintmsk = readl(hsotg->regs + GINTMSK); u32 new_gsintmsk; @@ -134,7 +136,7 @@ static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints) * Set or clear the mask for an individual endpoint's interrupt * request. */ -static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg, +static void s3c_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg, unsigned int ep, unsigned int dir_in, unsigned int en) { @@ -159,7 +161,7 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg, * s3c_hsotg_init_fifo - initialise non-periodic FIFOs * @hsotg: The device instance. */ -static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) +static void s3c_hsotg_init_fifo(struct dwc2_hsotg *hsotg) { unsigned int ep; unsigned int addr; @@ -283,7 +285,7 @@ static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep) * This is the reverse of s3c_hsotg_map_dma(), called for the completion * of a request to ensure the buffer is ready for access by the caller. */ -static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, +static void s3c_hsotg_unmap_dma(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) { @@ -312,7 +314,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, * * This routine is only needed for PIO */ -static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, +static int s3c_hsotg_write_fifo(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) { @@ -517,7 +519,7 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) * Start the given request running by setting the endpoint registers * appropriately, and writing any data to the FIFOs. */ -static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, +static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, bool continuing) @@ -707,7 +709,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, * DMA memory, then we map the memory and mark our request to allow us to * cleanup on completion. */ -static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, +static int s3c_hsotg_map_dma(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct usb_request *req) { @@ -736,7 +738,7 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, { struct s3c_hsotg_req *hs_req = our_req(req); struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; + struct dwc2_hsotg *hs = hs_ep->parent; bool first; dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", @@ -768,7 +770,7 @@ static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; + struct dwc2_hsotg *hs = hs_ep->parent; unsigned long flags = 0; int ret = 0; @@ -799,7 +801,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep, struct usb_request *req) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg *hsotg = hs_ep->parent; dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req); @@ -814,7 +816,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep, * Convert the given wIndex into a pointer to an driver endpoint * structure, or return NULL if it is not a valid endpoint. */ -static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, +static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg, u32 windex) { struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F]; @@ -843,7 +845,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, * Create a request and queue it on the given endpoint. This is useful as * an internal method of sending replies to certain control requests, etc. */ -static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg, +static int s3c_hsotg_send_reply(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *ep, void *buff, int length) @@ -884,7 +886,7 @@ static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg, * @hsotg: The device state * @ctrl: USB control request */ -static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg, +static int s3c_hsotg_process_req_status(struct dwc2_hsotg *hsotg, struct usb_ctrlrequest *ctrl) { struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; @@ -955,7 +957,7 @@ static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep) * @hsotg: The device state * @ctrl: USB control request */ -static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, +static int s3c_hsotg_process_req_feature(struct dwc2_hsotg *hsotg, struct usb_ctrlrequest *ctrl) { struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; @@ -1028,8 +1030,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, return 1; } -static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); -static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); +static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg); /** * s3c_hsotg_stall_ep0 - stall ep0 @@ -1037,7 +1038,7 @@ static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); * * Set stall for ep0 as response for setup request. */ -static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) +static void s3c_hsotg_stall_ep0(struct dwc2_hsotg *hsotg) { struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; u32 reg; @@ -1076,7 +1077,7 @@ static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) * needs to work out what to do next (and whether to pass it on to the * gadget driver). */ -static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, +static void s3c_hsotg_process_control(struct dwc2_hsotg *hsotg, struct usb_ctrlrequest *ctrl) { struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; @@ -1107,7 +1108,6 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { switch (ctrl->bRequest) { case USB_REQ_SET_ADDRESS: - s3c_hsotg_disconnect(hsotg); dcfg = readl(hsotg->regs + DCFG); dcfg &= ~DCFG_DEVADDR_MASK; dcfg |= (le16_to_cpu(ctrl->wValue) << @@ -1161,7 +1161,7 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep, struct usb_request *req) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg *hsotg = hs_ep->parent; if (req->status < 0) { dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status); @@ -1183,7 +1183,7 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep, * Enqueue a request on EP0 if necessary to received any SETUP packets * received from the host. */ -static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) +static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg) { struct usb_request *req = hsotg->ctrl_req; struct s3c_hsotg_req *hs_req = our_req(req); @@ -1226,7 +1226,7 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) * * Note, expects the ep to already be locked as appropriate. */ -static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, +static void s3c_hsotg_complete_request(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req, int result) @@ -1291,7 +1291,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, * endpoint, so sort out whether we need to read the data into a request * that has been made for that endpoint. */ -static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) +static void s3c_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx]; struct s3c_hsotg_req *hs_req = hs_ep->req; @@ -1356,7 +1356,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) * currently believed that we do not need to wait for any space in * the TxFIFO. */ -static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, +static void s3c_hsotg_send_zlp(struct dwc2_hsotg *hsotg, struct s3c_hsotg_req *req) { u32 ctrl; @@ -1398,7 +1398,7 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, * transfer for an OUT endpoint has been completed, either by a short * packet or by the finish of a transfer. */ -static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, +static void s3c_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum, bool was_setup) { u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum)); @@ -1471,7 +1471,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, * * Return the current frame number */ -static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) +static u32 s3c_hsotg_read_frameno(struct dwc2_hsotg *hsotg) { u32 dsts; @@ -1498,7 +1498,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) * as the actual data should be sent to the memory directly and we turn * on the completion interrupts to get notifications of transfer completion. */ -static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) +static void s3c_hsotg_handle_rx(struct dwc2_hsotg *hsotg) { u32 grxstsr = readl(hsotg->regs + GRXSTSP); u32 epnum, status, size; @@ -1590,7 +1590,7 @@ static u32 s3c_hsotg_ep0_mps(unsigned int mps) * Configure the maximum packet size for the given endpoint, updating * the hardware control registers to reflect this. */ -static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, +static void s3c_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg, unsigned int ep, unsigned int mps) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep]; @@ -1645,7 +1645,7 @@ bad_mps: * @hsotg: The driver state * @idx: The index for the endpoint (0..15) */ -static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) +static void s3c_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx) { int timeout; int val; @@ -1681,7 +1681,7 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) * Check to see if there is a request that has data to send, and if so * make an attempt to write data into the FIFO. */ -static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg, +static int s3c_hsotg_trytx(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep) { struct s3c_hsotg_req *hs_req = hs_ep->req; @@ -1714,7 +1714,7 @@ static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg, * An IN transfer has been completed, update the transfer's state and then * call the relevant completion routines. */ -static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, +static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep) { struct s3c_hsotg_req *hs_req = hs_ep->req; @@ -1791,7 +1791,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * * Process and clear any interrupt pending for an individual endpoint */ -static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, +static void s3c_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, int dir_in) { struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx]; @@ -1916,7 +1916,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, * Handle updating the device settings after the enumeration phase has * been completed. */ -static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) +static void s3c_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg) { u32 dsts = readl(hsotg->regs + DSTS); int ep0_mps = 0, ep_mps = 8; @@ -1993,7 +1993,7 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) * Go through the requests on the given endpoint and mark them * completed with the given result code. */ -static void kill_all_requests(struct s3c_hsotg *hsotg, +static void kill_all_requests(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *ep, int result, bool force) { @@ -2027,22 +2027,27 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, * transactions and signal the gadget driver that this * has happened. */ -static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg) +void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg) { unsigned ep; + if (!hsotg->connected) + return; + + hsotg->connected = 0; for (ep = 0; ep < hsotg->num_of_eps; ep++) kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true); call_gadget(hsotg, disconnect); } +EXPORT_SYMBOL_GPL(s3c_hsotg_disconnect); /** * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler * @hsotg: The device state: * @periodic: True if this is a periodic FIFO interrupt */ -static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) +static void s3c_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) { struct s3c_hsotg_ep *ep; int epno, ret; @@ -2076,7 +2081,7 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) * * Issue a soft reset to the core, and await the core finishing it. */ -static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) +static int s3c_hsotg_corereset(struct dwc2_hsotg *hsotg) { int timeout; u32 grstctl; @@ -2124,7 +2129,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) * * Issue a soft reset to the core, and await the core finishing it. */ -static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) +void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg) { s3c_hsotg_corereset(hsotg); @@ -2241,12 +2246,23 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) readl(hsotg->regs + DOEPCTL0)); /* clear global NAKs */ - writel(DCTL_CGOUTNAK | DCTL_CGNPINNAK, + writel(DCTL_CGOUTNAK | DCTL_CGNPINNAK | DCTL_SFTDISCON, hsotg->regs + DCTL); /* must be at-least 3ms to allow bus to see disconnect */ mdelay(3); + hsotg->last_rst = jiffies; +} + +static void s3c_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) +{ + /* set the soft-disconnect bit */ + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); +} + +void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) +{ /* remove the soft-disconnect and let's go */ __bic32(hsotg->regs + DCTL, DCTL_SFTDISCON); } @@ -2258,7 +2274,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) */ static irqreturn_t s3c_hsotg_irq(int irq, void *pw) { - struct s3c_hsotg *hsotg = pw; + struct dwc2_hsotg *hsotg = pw; int retry_count = 8; u32 gintsts; u32 gintmsk; @@ -2273,31 +2289,11 @@ irq_retry: gintsts &= gintmsk; - if (gintsts & GINTSTS_OTGINT) { - u32 otgint = readl(hsotg->regs + GOTGINT); - - dev_info(hsotg->dev, "OTGInt: %08x\n", otgint); - - writel(otgint, hsotg->regs + GOTGINT); - } - - if (gintsts & GINTSTS_SESSREQINT) { - dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__); - writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); - } - if (gintsts & GINTSTS_ENUMDONE) { writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS); s3c_hsotg_irq_enumdone(hsotg); - } - - if (gintsts & GINTSTS_CONIDSTSCHNG) { - dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n", - readl(hsotg->regs + DSTS), - readl(hsotg->regs + GOTGCTL)); - - writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); + hsotg->connected = 1; } if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) { @@ -2340,8 +2336,8 @@ irq_retry: kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); - s3c_hsotg_core_init(hsotg); - hsotg->last_rst = jiffies; + s3c_hsotg_core_init_disconnected(hsotg); + s3c_hsotg_core_connect(hsotg); } } } @@ -2380,25 +2376,6 @@ irq_retry: s3c_hsotg_handle_rx(hsotg); } - if (gintsts & GINTSTS_MODEMIS) { - dev_warn(hsotg->dev, "warning, mode mismatch triggered\n"); - writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); - } - - if (gintsts & GINTSTS_USBSUSP) { - dev_info(hsotg->dev, "GINTSTS_USBSusp\n"); - writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); - - call_gadget(hsotg, suspend); - } - - if (gintsts & GINTSTS_WKUPINT) { - dev_info(hsotg->dev, "GINTSTS_WkUpIn\n"); - writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); - - call_gadget(hsotg, resume); - } - if (gintsts & GINTSTS_ERLYSUSP) { dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS); @@ -2450,7 +2427,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg *hsotg = hs_ep->parent; unsigned long flags; int index = hs_ep->index; u32 epctrl_reg; @@ -2593,7 +2570,7 @@ error: static int s3c_hsotg_ep_disable(struct usb_ep *ep) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; int index = hs_ep->index; unsigned long flags; @@ -2658,7 +2635,7 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) { struct s3c_hsotg_req *hs_req = our_req(req); struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; + struct dwc2_hsotg *hs = hs_ep->parent; unsigned long flags; dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req); @@ -2684,7 +2661,7 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; + struct dwc2_hsotg *hs = hs_ep->parent; int index = hs_ep->index; u32 epreg; u32 epctl; @@ -2748,7 +2725,7 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) { struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; + struct dwc2_hsotg *hs = hs_ep->parent; unsigned long flags = 0; int ret = 0; @@ -2777,7 +2754,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = { * A wrapper for platform code responsible for controlling * low-level USB code */ -static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) +static void s3c_hsotg_phy_enable(struct dwc2_hsotg *hsotg) { struct platform_device *pdev = to_platform_device(hsotg->dev); @@ -2800,7 +2777,7 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) * A wrapper for platform code responsible for controlling * low-level USB code */ -static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) +static void s3c_hsotg_phy_disable(struct dwc2_hsotg *hsotg) { struct platform_device *pdev = to_platform_device(hsotg->dev); @@ -2818,7 +2795,7 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) * s3c_hsotg_init - initalize the usb core * @hsotg: The driver state */ -static void s3c_hsotg_init(struct s3c_hsotg *hsotg) +static void s3c_hsotg_init(struct dwc2_hsotg *hsotg) { /* unmask subset of endpoint interrupts */ @@ -2868,7 +2845,8 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) static int s3c_hsotg_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { - struct s3c_hsotg *hsotg = to_hsotg(gadget); + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; int ret; if (!hsotg) { @@ -2889,6 +2867,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, return -EINVAL; } + mutex_lock(&hsotg->init_mutex); WARN_ON(hsotg->driver); driver->driver.bus = NULL; @@ -2905,11 +2884,22 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, goto err; } - hsotg->last_rst = jiffies; + s3c_hsotg_phy_enable(hsotg); + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_init(hsotg); + s3c_hsotg_core_init_disconnected(hsotg); + hsotg->enabled = 0; + spin_unlock_irqrestore(&hsotg->lock, flags); + dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); + + mutex_unlock(&hsotg->init_mutex); + return 0; err: + mutex_unlock(&hsotg->init_mutex); hsotg->driver = NULL; return ret; } @@ -2921,16 +2911,17 @@ err: * * Stop udc hw block and stay tunned for future transmissions */ -static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int s3c_hsotg_udc_stop(struct usb_gadget *gadget) { - struct s3c_hsotg *hsotg = to_hsotg(gadget); + struct dwc2_hsotg *hsotg = to_hsotg(gadget); unsigned long flags = 0; int ep; if (!hsotg) return -ENODEV; + mutex_lock(&hsotg->init_mutex); + /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); @@ -2939,13 +2930,18 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, hsotg->driver = NULL; hsotg->gadget.speed = USB_SPEED_UNKNOWN; + hsotg->enabled = 0; spin_unlock_irqrestore(&hsotg->lock, flags); + s3c_hsotg_phy_disable(hsotg); + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); clk_disable(hsotg->clk); + mutex_unlock(&hsotg->init_mutex); + return 0; } @@ -2969,23 +2965,26 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) */ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on) { - struct s3c_hsotg *hsotg = to_hsotg(gadget); + struct dwc2_hsotg *hsotg = to_hsotg(gadget); unsigned long flags = 0; dev_dbg(hsotg->dev, "%s: is_on: %d\n", __func__, is_on); + mutex_lock(&hsotg->init_mutex); spin_lock_irqsave(&hsotg->lock, flags); if (is_on) { - s3c_hsotg_phy_enable(hsotg); clk_enable(hsotg->clk); - s3c_hsotg_core_init(hsotg); + hsotg->enabled = 1; + s3c_hsotg_core_connect(hsotg); } else { + s3c_hsotg_core_disconnect(hsotg); + hsotg->enabled = 0; clk_disable(hsotg->clk); - s3c_hsotg_phy_disable(hsotg); } hsotg->gadget.speed = USB_SPEED_UNKNOWN; spin_unlock_irqrestore(&hsotg->lock, flags); + mutex_unlock(&hsotg->init_mutex); return 0; } @@ -3007,7 +3006,7 @@ static const struct usb_gadget_ops s3c_hsotg_gadget_ops = { * creation) to give to the gadget driver. Setup the endpoint name, any * direction information and other state that may be required. */ -static void s3c_hsotg_initep(struct s3c_hsotg *hsotg, +static void s3c_hsotg_initep(struct dwc2_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, int epnum) { @@ -3056,7 +3055,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg, * * Read the USB core HW configuration registers */ -static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg) +static void s3c_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) { u32 cfg2, cfg3, cfg4; /* check hardware configuration */ @@ -3080,7 +3079,7 @@ static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg) * s3c_hsotg_dump - dump state of the udc * @param: The device state */ -static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) +static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg) { #ifdef DEBUG struct device *dev = hsotg->dev; @@ -3139,7 +3138,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) */ static int state_show(struct seq_file *seq, void *v) { - struct s3c_hsotg *hsotg = seq->private; + struct dwc2_hsotg *hsotg = seq->private; void __iomem *regs = hsotg->regs; int idx; @@ -3209,7 +3208,7 @@ static const struct file_operations state_fops = { */ static int fifo_show(struct seq_file *seq, void *v) { - struct s3c_hsotg *hsotg = seq->private; + struct dwc2_hsotg *hsotg = seq->private; void __iomem *regs = hsotg->regs; u32 val; int idx; @@ -3265,7 +3264,7 @@ static const char *decode_direction(int is_in) static int ep_show(struct seq_file *seq, void *v) { struct s3c_hsotg_ep *ep = seq->private; - struct s3c_hsotg *hsotg = ep->parent; + struct dwc2_hsotg *hsotg = ep->parent; struct s3c_hsotg_req *req; void __iomem *regs = hsotg->regs; int index = ep->index; @@ -3342,7 +3341,7 @@ static const struct file_operations ep_fops = { * with the same name as the device itself, in case we end up * with multiple blocks in future systems. */ -static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) +static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) { struct dentry *root; unsigned epidx; @@ -3388,7 +3387,7 @@ static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) * * Cleanup (remove) the debugfs files for use on module exit. */ -static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) +static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg) { unsigned epidx; @@ -3403,27 +3402,21 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) } /** - * s3c_hsotg_probe - probe function for hsotg driver - * @pdev: The platform information for the driver + * dwc2_gadget_init - init function for gadget + * @dwc2: The data structure for the DWC2 driver. + * @irq: The IRQ number for the controller. */ - -static int s3c_hsotg_probe(struct platform_device *pdev) +int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) { - struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev); + struct device *dev = hsotg->dev; + struct s3c_hsotg_plat *plat = dev->platform_data; struct phy *phy; struct usb_phy *uphy; - struct device *dev = &pdev->dev; struct s3c_hsotg_ep *eps; - struct s3c_hsotg *hsotg; - struct resource *res; int epnum; int ret; int i; - hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL); - if (!hsotg) - return -ENOMEM; - /* Set default UTMI width */ hsotg->phyif = GUSBCFG_PHYIF16; @@ -3431,14 +3424,14 @@ static int s3c_hsotg_probe(struct platform_device *pdev) * Attempt to find a generic PHY, then look for an old style * USB PHY, finally fall back to pdata */ - phy = devm_phy_get(&pdev->dev, "usb2-phy"); + phy = devm_phy_get(dev, "usb2-phy"); if (IS_ERR(phy)) { uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); if (IS_ERR(uphy)) { /* Fallback for pdata */ - plat = dev_get_platdata(&pdev->dev); + plat = dev_get_platdata(dev); if (!plat) { - dev_err(&pdev->dev, + dev_err(dev, "no platform data or transceiver defined\n"); return -EPROBE_DEFER; } @@ -3455,43 +3448,24 @@ static int s3c_hsotg_probe(struct platform_device *pdev) hsotg->phyif = GUSBCFG_PHYIF8; } - hsotg->dev = dev; - - hsotg->clk = devm_clk_get(&pdev->dev, "otg"); + hsotg->clk = devm_clk_get(dev, "otg"); if (IS_ERR(hsotg->clk)) { - dev_err(dev, "cannot get otg clock\n"); - return PTR_ERR(hsotg->clk); - } - - platform_set_drvdata(pdev, hsotg); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - hsotg->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hsotg->regs)) { - ret = PTR_ERR(hsotg->regs); - goto err_clk; + hsotg->clk = NULL; + dev_dbg(dev, "cannot get otg clock\n"); } - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "cannot find IRQ\n"); - goto err_clk; - } - - spin_lock_init(&hsotg->lock); - - hsotg->irq = ret; - - dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq); - hsotg->gadget.max_speed = USB_SPEED_HIGH; hsotg->gadget.ops = &s3c_hsotg_gadget_ops; hsotg->gadget.name = dev_name(dev); /* reset the system */ - clk_prepare_enable(hsotg->clk); + ret = clk_prepare_enable(hsotg->clk); + if (ret) { + dev_err(dev, "failed to enable otg clk\n"); + goto err_clk; + } + /* regulators */ @@ -3509,7 +3483,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev) hsotg->supplies); if (ret) { - dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); + dev_err(dev, "failed to enable supplies: %d\n", ret); goto err_supplies; } @@ -3520,14 +3494,14 @@ static int s3c_hsotg_probe(struct platform_device *pdev) s3c_hsotg_hw_cfg(hsotg); s3c_hsotg_init(hsotg); - ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0, - dev_name(dev), hsotg); + ret = devm_request_irq(hsotg->dev, irq, s3c_hsotg_irq, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); if (ret < 0) { s3c_hsotg_phy_disable(hsotg); clk_disable_unprepare(hsotg->clk); regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - dev_err(dev, "cannot claim IRQ\n"); + dev_err(dev, "cannot claim IRQ for gadget\n"); goto err_clk; } @@ -3573,11 +3547,11 @@ static int s3c_hsotg_probe(struct platform_device *pdev) ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); if (ret) { - dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret); + dev_err(dev, "failed to disable supplies: %d\n", ret); goto err_ep_mem; } - ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); + ret = usb_add_gadget_udc(dev, &hsotg->gadget); if (ret) goto err_ep_mem; @@ -3596,47 +3570,44 @@ err_clk: return ret; } +EXPORT_SYMBOL_GPL(dwc2_gadget_init); /** * s3c_hsotg_remove - remove function for hsotg driver * @pdev: The platform information for the driver */ -static int s3c_hsotg_remove(struct platform_device *pdev) +int s3c_hsotg_remove(struct dwc2_hsotg *hsotg) { - struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); - usb_del_gadget_udc(&hsotg->gadget); - s3c_hsotg_delete_debug(hsotg); - - if (hsotg->driver) { - /* should have been done already by driver model core */ - usb_gadget_unregister_driver(hsotg->driver); - } - clk_disable_unprepare(hsotg->clk); return 0; } +EXPORT_SYMBOL_GPL(s3c_hsotg_remove); -static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state) +int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg) { - struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); unsigned long flags; int ret = 0; - if (hsotg->driver) + mutex_lock(&hsotg->init_mutex); + + if (hsotg->driver) { + int ep; + dev_info(hsotg->dev, "suspending usb gadget %s\n", hsotg->driver->driver.name); - spin_lock_irqsave(&hsotg->lock, flags); - s3c_hsotg_disconnect(hsotg); - s3c_hsotg_phy_disable(hsotg); - hsotg->gadget.speed = USB_SPEED_UNKNOWN; - spin_unlock_irqrestore(&hsotg->lock, flags); + spin_lock_irqsave(&hsotg->lock, flags); + if (hsotg->enabled) + s3c_hsotg_core_disconnect(hsotg); + s3c_hsotg_disconnect(hsotg); + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + + s3c_hsotg_phy_disable(hsotg); - if (hsotg->driver) { - int ep; for (ep = 0; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); @@ -3645,57 +3616,37 @@ static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state) clk_disable(hsotg->clk); } + mutex_unlock(&hsotg->init_mutex); + return ret; } +EXPORT_SYMBOL_GPL(s3c_hsotg_suspend); -static int s3c_hsotg_resume(struct platform_device *pdev) +int s3c_hsotg_resume(struct dwc2_hsotg *hsotg) { - struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); unsigned long flags; int ret = 0; + mutex_lock(&hsotg->init_mutex); + if (hsotg->driver) { dev_info(hsotg->dev, "resuming usb gadget %s\n", hsotg->driver->driver.name); clk_enable(hsotg->clk); ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - } + hsotg->supplies); - spin_lock_irqsave(&hsotg->lock, flags); - hsotg->last_rst = jiffies; - s3c_hsotg_phy_enable(hsotg); - s3c_hsotg_core_init(hsotg); - spin_unlock_irqrestore(&hsotg->lock, flags); + s3c_hsotg_phy_enable(hsotg); + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_core_init_disconnected(hsotg); + if (hsotg->enabled) + s3c_hsotg_core_connect(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + } + mutex_unlock(&hsotg->init_mutex); return ret; } - -#ifdef CONFIG_OF -static const struct of_device_id s3c_hsotg_of_ids[] = { - { .compatible = "samsung,s3c6400-hsotg", }, - { .compatible = "snps,dwc2", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, s3c_hsotg_of_ids); -#endif - -static struct platform_driver s3c_hsotg_driver = { - .driver = { - .name = "s3c-hsotg", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(s3c_hsotg_of_ids), - }, - .probe = s3c_hsotg_probe, - .remove = s3c_hsotg_remove, - .suspend = s3c_hsotg_suspend, - .resume = s3c_hsotg_resume, -}; - -module_platform_driver(s3c_hsotg_driver); - -MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s3c-hsotg"); +EXPORT_SYMBOL_GPL(s3c_hsotg_resume); diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 0a0e6f0..a0cd9db 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -1371,6 +1371,8 @@ static void dwc2_conn_id_status_change(struct work_struct *work) hsotg->op_state = OTG_STATE_B_PERIPHERAL; dwc2_core_init(hsotg, false, -1); dwc2_enable_global_interrupts(hsotg); + s3c_hsotg_core_init_disconnected(hsotg); + s3c_hsotg_core_connect(hsotg); } else { /* A-Device connector (Host Mode) */ dev_dbg(hsotg->dev, "connId A\n"); @@ -1471,6 +1473,30 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) } } +static void dwc2_port_resume(struct dwc2_hsotg *hsotg) +{ + u32 hprt0; + + /* After clear the Stop PHY clock bit, we should wait for a moment + * for PLL work stable with clock output. + */ + writel(0, hsotg->regs + PCGCTL); + usleep_range(2000, 4000); + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + hprt0 &= ~HPRT0_SUSP; + /* according to USB2.0 Spec 7.1.7.7, the host must send the resume + * signal for at least 20ms + */ + usleep_range(20000, 25000); + + hprt0 &= ~HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + hsotg->lx_state = DWC2_L0; +} + /* Handles hub class-specific requests */ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, u16 wvalue, u16 windex, char *buf, u16 wlength) @@ -1516,17 +1542,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, case USB_PORT_FEAT_SUSPEND: dev_dbg(hsotg->dev, "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); - writel(0, hsotg->regs + PCGCTL); - usleep_range(20000, 40000); - - hprt0 = dwc2_read_hprt0(hsotg); - hprt0 |= HPRT0_RES; - writel(hprt0, hsotg->regs + HPRT0); - hprt0 &= ~HPRT0_SUSP; - usleep_range(100000, 150000); - - hprt0 &= ~HPRT0_RES; - writel(hprt0, hsotg->regs + HPRT0); + dwc2_port_resume(hsotg); break; case USB_PORT_FEAT_POWER: @@ -2299,6 +2315,55 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd) usleep_range(1000, 3000); } +static int _dwc2_hcd_suspend(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + u32 hprt0; + + if (!((hsotg->op_state == OTG_STATE_B_HOST) || + (hsotg->op_state == OTG_STATE_A_HOST))) + return 0; + + /* TODO: We get into suspend from 'on' state, maybe we need to do + * something if we get here from DWC2_L1(LPM sleep) state one day. + */ + if (hsotg->lx_state != DWC2_L0) + return 0; + + hprt0 = dwc2_read_hprt0(hsotg); + if (hprt0 & HPRT0_CONNSTS) { + dwc2_port_suspend(hsotg, 1); + } else { + u32 pcgctl = readl(hsotg->regs + PCGCTL); + + pcgctl |= PCGCTL_STOPPCLK; + writel(pcgctl, hsotg->regs + PCGCTL); + } + + return 0; +} + +static int _dwc2_hcd_resume(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + u32 hprt0; + + if (!((hsotg->op_state == OTG_STATE_B_HOST) || + (hsotg->op_state == OTG_STATE_A_HOST))) + return 0; + + if (hsotg->lx_state != DWC2_L2) + return 0; + + hprt0 = dwc2_read_hprt0(hsotg); + if ((hprt0 & HPRT0_CONNSTS) && (hprt0 & HPRT0_SUSP)) + dwc2_port_resume(hsotg); + else + writel(0, hsotg->regs + PCGCTL); + + return 0; +} + /* Returns the current frame number */ static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) { @@ -2669,6 +2734,9 @@ static struct hc_driver dwc2_hc_driver = { .hub_status_data = _dwc2_hcd_hub_status_data, .hub_control = _dwc2_hcd_hub_control, .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, + + .bus_suspend = _dwc2_hcd_suspend, + .bus_resume = _dwc2_hcd_resume, }; /* @@ -2778,6 +2846,9 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, int i, num_channels; int retval; + if (usb_disabled()) + return -ENODEV; + dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); /* Detect config values from hardware */ @@ -2839,7 +2910,6 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, hcd->has_tt = 1; - spin_lock_init(&hsotg->lock); ((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg; hsotg->priv = hcd; diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index a12bb15..e69a843 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -668,9 +668,6 @@ extern irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg); */ extern void dwc2_hcd_stop(struct dwc2_hsotg *hsotg); -extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg); -extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg); - /** * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host, * and 0 otherwise @@ -680,13 +677,6 @@ extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg); extern int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg); /** - * dwc2_hcd_get_frame_number() - Returns current frame number - * - * @hsotg: The DWC2 HCD - */ -extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg); - -/** * dwc2_hcd_dump_state() - Dumps hsotg state * * @hsotg: The DWC2 HCD diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index c291fca..a4e724b 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -141,6 +141,13 @@ static int dwc2_driver_probe(struct pci_dev *dev, pci_set_master(dev); + retval = devm_request_irq(hsotg->dev, dev->irq, + dwc2_handle_common_intr, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); + if (retval) + return retval; + + spin_lock_init(&hsotg->lock); retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params); if (retval) { pci_disable_device(dev); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 121dbda..6a795aa 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -40,6 +40,7 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/of_device.h> +#include <linux/mutex.h> #include <linux/platform_device.h> #include <linux/usb/of.h> @@ -121,6 +122,7 @@ static int dwc2_driver_remove(struct platform_device *dev) struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); dwc2_hcd_remove(hsotg); + s3c_hsotg_remove(hsotg); return 0; } @@ -129,6 +131,7 @@ static const struct of_device_id dwc2_of_match_table[] = { { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, { .compatible = "snps,dwc2", .data = NULL }, + { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, {}, }; MODULE_DEVICE_TABLE(of, dwc2_of_match_table); @@ -155,9 +158,6 @@ static int dwc2_driver_probe(struct platform_device *dev) int retval; int irq; - if (usb_disabled()) - return -ENODEV; - match = of_match_device(dwc2_of_match_table, &dev->dev); if (match && match->data) { params = match->data; @@ -194,6 +194,14 @@ static int dwc2_driver_probe(struct platform_device *dev) return irq; } + dev_dbg(hsotg->dev, "registering common handler for irq%d\n", + irq); + retval = devm_request_irq(hsotg->dev, irq, + dwc2_handle_common_intr, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); + if (retval) + return retval; + res = platform_get_resource(dev, IORESOURCE_MEM, 0); hsotg->regs = devm_ioremap_resource(&dev->dev, res); if (IS_ERR(hsotg->regs)) @@ -204,6 +212,11 @@ static int dwc2_driver_probe(struct platform_device *dev) hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node); + spin_lock_init(&hsotg->lock); + mutex_init(&hsotg->init_mutex); + retval = dwc2_gadget_init(hsotg, irq); + if (retval) + return retval; retval = dwc2_hcd_init(hsotg, irq, params); if (retval) return retval; @@ -213,10 +226,35 @@ static int dwc2_driver_probe(struct platform_device *dev) return retval; } +static int __maybe_unused dwc2_suspend(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + int ret = 0; + + if (dwc2_is_device_mode(dwc2)) + ret = s3c_hsotg_suspend(dwc2); + return ret; +} + +static int __maybe_unused dwc2_resume(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + int ret = 0; + + if (dwc2_is_device_mode(dwc2)) + ret = s3c_hsotg_resume(dwc2); + return ret; +} + +static const struct dev_pm_ops dwc2_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) +}; + static struct platform_driver dwc2_platform_driver = { .driver = { .name = dwc2_driver_name, .of_match_table = dwc2_of_match_table, + .pm = &dwc2_dev_pm_ops, }, .probe = dwc2_driver_probe, .remove = dwc2_driver_remove, diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index f4e5cc6..58b5b2c 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -55,7 +55,7 @@ config USB_DWC3_OMAP config USB_DWC3_EXYNOS tristate "Samsung Exynos Platform" - depends on ARCH_EXYNOS || COMPILE_TEST + depends on ARCH_EXYNOS && OF || COMPILE_TEST default USB_DWC3 help Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside, diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index b0f4d52..25ddc39 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -19,6 +19,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> @@ -32,6 +33,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/of.h> +#include <linux/acpi.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -363,6 +365,72 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) } /** + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core + * @dwc: Pointer to our controller context structure + */ +static void dwc3_phy_setup(struct dwc3 *dwc) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + + /* + * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY + * to '0' during coreConsultant configuration. So default value + * will be '0' when the core is reset. Application needs to set it + * to '1' after the core initialization is completed. + */ + if (dwc->revision > DWC3_REVISION_194A) + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + + if (dwc->u2ss_inp3_quirk) + reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; + + if (dwc->req_p1p2p3_quirk) + reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; + + if (dwc->del_p1p2p3_quirk) + reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN; + + if (dwc->del_phy_power_chg_quirk) + reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE; + + if (dwc->lfps_filter_quirk) + reg |= DWC3_GUSB3PIPECTL_LFPSFILT; + + if (dwc->rx_detect_poll_quirk) + reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL; + + if (dwc->tx_de_emphasis_quirk) + reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); + + if (dwc->dis_u3_susphy_quirk) + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + mdelay(100); + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + + /* + * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to + * '0' during coreConsultant configuration. So default value will + * be '0' when the core is reset. Application needs to set it to + * '1' after the core initialization is completed. + */ + if (dwc->revision > DWC3_REVISION_194A) + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + + if (dwc->dis_u2_susphy_quirk) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + mdelay(100); +} + +/** * dwc3_core_init - Low-level initialization of DWC3 Core * @dwc: Pointer to our controller context structure * @@ -384,6 +452,12 @@ static int dwc3_core_init(struct dwc3 *dwc) } dwc->revision = reg; + /* + * Write Linux Version Code to our GUID register so it's easy to figure + * out which kernel version a bug was found. + */ + dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE); + /* Handle USB2.0-only core configuration */ if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) { @@ -414,7 +488,6 @@ static int dwc3_core_init(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; - reg &= ~DWC3_GCTL_DISSCRAMBLE; switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: @@ -441,11 +514,34 @@ static int dwc3_core_init(struct dwc3 *dwc) case DWC3_GHWPARAMS1_EN_PWROPT_HIB: /* enable hibernation here */ dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); + + /* + * REVISIT Enabling this bit so that host-mode hibernation + * will work. Device-mode hibernation is not yet implemented. + */ + reg |= DWC3_GCTL_GBLHIBERNATIONEN; break; default: dev_dbg(dwc->dev, "No power optimization available\n"); } + /* check if current dwc3 is on simulation board */ + if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { + dev_dbg(dwc->dev, "it is on FPGA board\n"); + dwc->is_fpga = true; + } + + WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga, + "disable_scramble cannot be used on non-FPGA builds\n"); + + if (dwc->disable_scramble_quirk && dwc->is_fpga) + reg |= DWC3_GCTL_DISSCRAMBLE; + else + reg &= ~DWC3_GCTL_DISSCRAMBLE; + + if (dwc->u2exit_lfps_quirk) + reg |= DWC3_GCTL_U2EXIT_LFPS; + /* * WORKAROUND: DWC3 revisions <1.90a have a bug * where the device can fail to connect at SuperSpeed @@ -459,6 +555,8 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); + dwc3_phy_setup(dwc); + ret = dwc3_alloc_scratch_buffers(dwc); if (ret) goto err1; @@ -630,6 +728,9 @@ static int dwc3_probe(struct platform_device *pdev) struct device_node *node = dev->of_node; struct resource *res; struct dwc3 *dwc; + u8 lpm_nyet_threshold; + u8 tx_de_emphasis; + u8 hird_threshold; int ret; @@ -685,22 +786,96 @@ static int dwc3_probe(struct platform_device *pdev) */ res->start -= DWC3_GLOBALS_REGS_START; + /* default to highest possible threshold */ + lpm_nyet_threshold = 0xff; + + /* default to -3.5dB de-emphasis */ + tx_de_emphasis = 1; + + /* + * default to assert utmi_sleep_n and use maximum allowed HIRD + * threshold value of 0b1100 + */ + hird_threshold = 12; + if (node) { dwc->maximum_speed = of_usb_get_maximum_speed(node); - - dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); + dwc->has_lpm_erratum = of_property_read_bool(node, + "snps,has-lpm-erratum"); + of_property_read_u8(node, "snps,lpm-nyet-threshold", + &lpm_nyet_threshold); + dwc->is_utmi_l1_suspend = of_property_read_bool(node, + "snps,is-utmi-l1-suspend"); + of_property_read_u8(node, "snps,hird-threshold", + &hird_threshold); + + dwc->needs_fifo_resize = of_property_read_bool(node, + "tx-fifo-resize"); dwc->dr_mode = of_usb_get_dr_mode(node); + + dwc->disable_scramble_quirk = of_property_read_bool(node, + "snps,disable_scramble_quirk"); + dwc->u2exit_lfps_quirk = of_property_read_bool(node, + "snps,u2exit_lfps_quirk"); + dwc->u2ss_inp3_quirk = of_property_read_bool(node, + "snps,u2ss_inp3_quirk"); + dwc->req_p1p2p3_quirk = of_property_read_bool(node, + "snps,req_p1p2p3_quirk"); + dwc->del_p1p2p3_quirk = of_property_read_bool(node, + "snps,del_p1p2p3_quirk"); + dwc->del_phy_power_chg_quirk = of_property_read_bool(node, + "snps,del_phy_power_chg_quirk"); + dwc->lfps_filter_quirk = of_property_read_bool(node, + "snps,lfps_filter_quirk"); + dwc->rx_detect_poll_quirk = of_property_read_bool(node, + "snps,rx_detect_poll_quirk"); + dwc->dis_u3_susphy_quirk = of_property_read_bool(node, + "snps,dis_u3_susphy_quirk"); + dwc->dis_u2_susphy_quirk = of_property_read_bool(node, + "snps,dis_u2_susphy_quirk"); + + dwc->tx_de_emphasis_quirk = of_property_read_bool(node, + "snps,tx_de_emphasis_quirk"); + of_property_read_u8(node, "snps,tx_de_emphasis", + &tx_de_emphasis); } else if (pdata) { dwc->maximum_speed = pdata->maximum_speed; + dwc->has_lpm_erratum = pdata->has_lpm_erratum; + if (pdata->lpm_nyet_threshold) + lpm_nyet_threshold = pdata->lpm_nyet_threshold; + dwc->is_utmi_l1_suspend = pdata->is_utmi_l1_suspend; + if (pdata->hird_threshold) + hird_threshold = pdata->hird_threshold; dwc->needs_fifo_resize = pdata->tx_fifo_resize; dwc->dr_mode = pdata->dr_mode; + + dwc->disable_scramble_quirk = pdata->disable_scramble_quirk; + dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk; + dwc->u2ss_inp3_quirk = pdata->u2ss_inp3_quirk; + dwc->req_p1p2p3_quirk = pdata->req_p1p2p3_quirk; + dwc->del_p1p2p3_quirk = pdata->del_p1p2p3_quirk; + dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk; + dwc->lfps_filter_quirk = pdata->lfps_filter_quirk; + dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk; + dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk; + dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk; + + dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk; + if (pdata->tx_de_emphasis) + tx_de_emphasis = pdata->tx_de_emphasis; } /* default to superspeed if no maximum_speed passed */ if (dwc->maximum_speed == USB_SPEED_UNKNOWN) dwc->maximum_speed = USB_SPEED_SUPER; + dwc->lpm_nyet_threshold = lpm_nyet_threshold; + dwc->tx_de_emphasis = tx_de_emphasis; + + dwc->hird_threshold = hird_threshold + | (dwc->is_utmi_l1_suspend << 4); + ret = dwc3_core_get_phy(dwc); if (ret) return ret; @@ -708,9 +883,11 @@ static int dwc3_probe(struct platform_device *pdev) spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); - dev->dma_mask = dev->parent->dma_mask; - dev->dma_parms = dev->parent->dma_parms; - dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); + if (!dev->dma_mask) { + dev->dma_mask = dev->parent->dma_mask; + dev->dma_parms = dev->parent->dma_parms; + dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); + } pm_runtime_enable(dev); pm_runtime_get_sync(dev); @@ -815,50 +992,6 @@ static int dwc3_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -static int dwc3_prepare(struct device *dev) -{ - struct dwc3 *dwc = dev_get_drvdata(dev); - unsigned long flags; - - spin_lock_irqsave(&dwc->lock, flags); - - switch (dwc->dr_mode) { - case USB_DR_MODE_PERIPHERAL: - case USB_DR_MODE_OTG: - dwc3_gadget_prepare(dwc); - /* FALLTHROUGH */ - case USB_DR_MODE_HOST: - default: - dwc3_event_buffers_cleanup(dwc); - break; - } - - spin_unlock_irqrestore(&dwc->lock, flags); - - return 0; -} - -static void dwc3_complete(struct device *dev) -{ - struct dwc3 *dwc = dev_get_drvdata(dev); - unsigned long flags; - - spin_lock_irqsave(&dwc->lock, flags); - - dwc3_event_buffers_setup(dwc); - switch (dwc->dr_mode) { - case USB_DR_MODE_PERIPHERAL: - case USB_DR_MODE_OTG: - dwc3_gadget_complete(dwc); - /* FALLTHROUGH */ - case USB_DR_MODE_HOST: - default: - break; - } - - spin_unlock_irqrestore(&dwc->lock, flags); -} - static int dwc3_suspend(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); @@ -873,7 +1006,7 @@ static int dwc3_suspend(struct device *dev) /* FALLTHROUGH */ case USB_DR_MODE_HOST: default: - /* do nothing */ + dwc3_event_buffers_cleanup(dwc); break; } @@ -906,6 +1039,7 @@ static int dwc3_resume(struct device *dev) spin_lock_irqsave(&dwc->lock, flags); + dwc3_event_buffers_setup(dwc); dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl); switch (dwc->dr_mode) { @@ -934,9 +1068,6 @@ err_usb2phy_init: } static const struct dev_pm_ops dwc3_dev_pm_ops = { - .prepare = dwc3_prepare, - .complete = dwc3_complete, - SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) }; @@ -958,12 +1089,24 @@ static const struct of_device_id of_dwc3_match[] = { MODULE_DEVICE_TABLE(of, of_dwc3_match); #endif +#ifdef CONFIG_ACPI + +#define ACPI_ID_INTEL_BSW "808622B7" + +static const struct acpi_device_id dwc3_acpi_match[] = { + { ACPI_ID_INTEL_BSW, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); +#endif + static struct platform_driver dwc3_driver = { .probe = dwc3_probe, .remove = dwc3_remove, .driver = { .name = "dwc3", .of_match_table = of_match_ptr(of_dwc3_match), + .acpi_match_table = ACPI_PTR(dwc3_acpi_match), .pm = DWC3_PM_OPS, }, }; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 66f6256..4bb9aa6 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -166,6 +166,7 @@ #define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) #define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) #define DWC3_GCTL_DISSCRAMBLE (1 << 3) +#define DWC3_GCTL_U2EXIT_LFPS (1 << 2) #define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1) #define DWC3_GCTL_DSBLCLKGTNG (1 << 0) @@ -175,7 +176,17 @@ /* Global USB3 PIPE Control Register */ #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) +#define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) +#define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24) +#define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19) +#define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7) +#define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1) +#define DWC3_GUSB3PIPECTL_DEPOCHANGE (1 << 18) #define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) +#define DWC3_GUSB3PIPECTL_LFPSFILT (1 << 9) +#define DWC3_GUSB3PIPECTL_RX_DETOPOLL (1 << 8) +#define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3) +#define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1) /* Global TX Fifo Size Register */ #define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff) @@ -210,6 +221,9 @@ #define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13) #define DWC3_MAX_HIBER_SCRATCHBUFS 15 +/* Global HWPARAMS6 Register */ +#define DWC3_GHWPARAMS6_EN_FPGA (1 << 7) + /* Device Configuration Register */ #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) @@ -243,16 +257,19 @@ #define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6)) /* These apply for core versions 1.94a and later */ -#define DWC3_DCTL_KEEP_CONNECT (1 << 19) -#define DWC3_DCTL_L1_HIBER_EN (1 << 18) -#define DWC3_DCTL_CRS (1 << 17) -#define DWC3_DCTL_CSS (1 << 16) +#define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf) +#define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20) + +#define DWC3_DCTL_KEEP_CONNECT (1 << 19) +#define DWC3_DCTL_L1_HIBER_EN (1 << 18) +#define DWC3_DCTL_CRS (1 << 17) +#define DWC3_DCTL_CSS (1 << 16) -#define DWC3_DCTL_INITU2ENA (1 << 12) -#define DWC3_DCTL_ACCEPTU2ENA (1 << 11) -#define DWC3_DCTL_INITU1ENA (1 << 10) -#define DWC3_DCTL_ACCEPTU1ENA (1 << 9) -#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1) +#define DWC3_DCTL_INITU2ENA (1 << 12) +#define DWC3_DCTL_ACCEPTU2ENA (1 << 11) +#define DWC3_DCTL_INITU1ENA (1 << 10) +#define DWC3_DCTL_ACCEPTU1ENA (1 << 9) +#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1) #define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5) #define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK) @@ -657,17 +674,41 @@ struct dwc3_scratchpad_array { * @regset: debugfs pointer to regdump file * @test_mode: true when we're entering a USB test mode * @test_mode_nr: test feature selector + * @lpm_nyet_threshold: LPM NYET response threshold + * @hird_threshold: HIRD threshold * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer * @has_hibernation: true when dwc3 was configured with Hibernation + * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that + * there's now way for software to detect this in runtime. + * @is_utmi_l1_suspend: the core asserts output signal + * 0 - utmi_sleep_n + * 1 - utmi_l1_suspend_n * @is_selfpowered: true when we are selfpowered + * @is_fpga: true when we are using the FPGA board * @needs_fifo_resize: not all users might want fifo resizing, flag it * @pullups_connected: true when Run/Stop bit is set * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued * @three_stage_setup: set if we perform a three phase setup + * @disable_scramble_quirk: set if we enable the disable scramble quirk + * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk + * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk + * @req_p1p2p3_quirk: set if we enable request p1p2p3 quirk + * @del_p1p2p3_quirk: set if we enable delay p1p2p3 quirk + * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk + * @lfps_filter_quirk: set if we enable LFPS filter quirk + * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk + * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy + * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy + * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk + * @tx_de_emphasis: Tx de-emphasis value + * 0 - -6dB de-emphasis + * 1 - -3.5dB de-emphasis + * 2 - No de-emphasis + * 3 - Reserved */ struct dwc3 { struct usb_ctrlrequest *ctrl_req; @@ -759,18 +800,37 @@ struct dwc3 { u8 test_mode; u8 test_mode_nr; + u8 lpm_nyet_threshold; + u8 hird_threshold; unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; unsigned has_hibernation:1; + unsigned has_lpm_erratum:1; + unsigned is_utmi_l1_suspend:1; unsigned is_selfpowered:1; + unsigned is_fpga:1; unsigned needs_fifo_resize:1; unsigned pullups_connected:1; unsigned resize_fifos:1; unsigned setup_packet_pending:1; unsigned start_config_issued:1; unsigned three_stage_setup:1; + + unsigned disable_scramble_quirk:1; + unsigned u2exit_lfps_quirk:1; + unsigned u2ss_inp3_quirk:1; + unsigned req_p1p2p3_quirk:1; + unsigned del_p1p2p3_quirk:1; + unsigned del_phy_power_chg_quirk:1; + unsigned lfps_filter_quirk:1; + unsigned rx_detect_poll_quirk:1; + unsigned dis_u3_susphy_quirk:1; + unsigned dis_u2_susphy_quirk:1; + + unsigned tx_de_emphasis_quirk:1; + unsigned tx_de_emphasis:2; }; /* -------------------------------------------------------------------------- */ @@ -964,20 +1024,9 @@ static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, /* power management interface */ #if !IS_ENABLED(CONFIG_USB_DWC3_HOST) -int dwc3_gadget_prepare(struct dwc3 *dwc); -void dwc3_gadget_complete(struct dwc3 *dwc); int dwc3_gadget_suspend(struct dwc3 *dwc); int dwc3_gadget_resume(struct dwc3 *dwc); #else -static inline int dwc3_gadget_prepare(struct dwc3 *dwc) -{ - return 0; -} - -static inline void dwc3_gadget_complete(struct dwc3 *dwc) -{ -} - static inline int dwc3_gadget_suspend(struct dwc3 *dwc) { return 0; diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 3951a65..7bd0a95 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/platform_device.h> -#include <linux/platform_data/dwc3-exynos.h> #include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/usb/otg.h> @@ -35,6 +34,9 @@ struct dwc3_exynos { struct device *dev; struct clk *clk; + struct clk *susp_clk; + struct clk *axius_clk; + struct regulator *vdd33; struct regulator *vdd10; }; @@ -106,7 +108,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused) static int dwc3_exynos_probe(struct platform_device *pdev) { struct dwc3_exynos *exynos; - struct clk *clk; struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; @@ -133,16 +134,32 @@ static int dwc3_exynos_probe(struct platform_device *pdev) return ret; } - clk = devm_clk_get(dev, "usbdrd30"); - if (IS_ERR(clk)) { + exynos->dev = dev; + + exynos->clk = devm_clk_get(dev, "usbdrd30"); + if (IS_ERR(exynos->clk)) { dev_err(dev, "couldn't get clock\n"); return -EINVAL; } + clk_prepare_enable(exynos->clk); - exynos->dev = dev; - exynos->clk = clk; + exynos->susp_clk = devm_clk_get(dev, "usbdrd30_susp_clk"); + if (IS_ERR(exynos->susp_clk)) { + dev_dbg(dev, "no suspend clk specified\n"); + exynos->susp_clk = NULL; + } + clk_prepare_enable(exynos->susp_clk); - clk_prepare_enable(exynos->clk); + if (of_device_is_compatible(node, "samsung,exynos7-dwusb3")) { + exynos->axius_clk = devm_clk_get(dev, "usbdrd30_axius_clk"); + if (IS_ERR(exynos->axius_clk)) { + dev_err(dev, "no AXI UpScaler clk specified\n"); + return -ENODEV; + } + clk_prepare_enable(exynos->axius_clk); + } else { + exynos->axius_clk = NULL; + } exynos->vdd33 = devm_regulator_get(dev, "vdd33"); if (IS_ERR(exynos->vdd33)) { @@ -185,7 +202,9 @@ err4: err3: regulator_disable(exynos->vdd33); err2: - clk_disable_unprepare(clk); + clk_disable_unprepare(exynos->axius_clk); + clk_disable_unprepare(exynos->susp_clk); + clk_disable_unprepare(exynos->clk); return ret; } @@ -197,6 +216,8 @@ static int dwc3_exynos_remove(struct platform_device *pdev) platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); + clk_disable_unprepare(exynos->axius_clk); + clk_disable_unprepare(exynos->susp_clk); clk_disable_unprepare(exynos->clk); regulator_disable(exynos->vdd33); @@ -205,19 +226,19 @@ static int dwc3_exynos_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static const struct of_device_id exynos_dwc3_match[] = { { .compatible = "samsung,exynos5250-dwusb3" }, + { .compatible = "samsung,exynos7-dwusb3" }, {}, }; MODULE_DEVICE_TABLE(of, exynos_dwc3_match); -#endif #ifdef CONFIG_PM_SLEEP static int dwc3_exynos_suspend(struct device *dev) { struct dwc3_exynos *exynos = dev_get_drvdata(dev); + clk_disable(exynos->axius_clk); clk_disable(exynos->clk); regulator_disable(exynos->vdd33); @@ -243,6 +264,7 @@ static int dwc3_exynos_resume(struct device *dev) } clk_enable(exynos->clk); + clk_enable(exynos->axius_clk); /* runtime set active to reflect active state. */ pm_runtime_disable(dev); @@ -266,7 +288,7 @@ static struct platform_driver dwc3_exynos_driver = { .remove = dwc3_exynos_remove, .driver = { .name = "exynos-dwc3", - .of_match_table = of_match_ptr(exynos_dwc3_match), + .of_match_table = exynos_dwc3_match, .pm = DEV_PM_OPS, }, }; diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c index dd8d2df..fe3b933 100644 --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -123,6 +123,7 @@ static int kdwc3_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "missing irq\n"); + error = irq; goto err_irq; } diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index a0aa9f3..172d64e 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -593,27 +593,12 @@ static const struct of_device_id of_dwc3_match[] = { MODULE_DEVICE_TABLE(of, of_dwc3_match); #ifdef CONFIG_PM_SLEEP -static int dwc3_omap_prepare(struct device *dev) -{ - struct dwc3_omap *omap = dev_get_drvdata(dev); - - dwc3_omap_disable_irqs(omap); - - return 0; -} - -static void dwc3_omap_complete(struct device *dev) -{ - struct dwc3_omap *omap = dev_get_drvdata(dev); - - dwc3_omap_enable_irqs(omap); -} - static int dwc3_omap_suspend(struct device *dev) { struct dwc3_omap *omap = dev_get_drvdata(dev); omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap); + dwc3_omap_disable_irqs(omap); return 0; } @@ -623,6 +608,7 @@ static int dwc3_omap_resume(struct device *dev) struct dwc3_omap *omap = dev_get_drvdata(dev); dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status); + dwc3_omap_enable_irqs(omap); pm_runtime_disable(dev); pm_runtime_set_active(dev); @@ -632,8 +618,6 @@ static int dwc3_omap_resume(struct device *dev) } static const struct dev_pm_ops dwc3_omap_dev_pm_ops = { - .prepare = dwc3_omap_prepare, - .complete = dwc3_omap_complete, SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume) }; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index a36cf66..7c4faf7 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -25,6 +25,8 @@ #include <linux/usb/otg.h> #include <linux/usb/usb_phy_generic.h> +#include "platform_data.h" + /* FIXME define these in <linux/pci_ids.h> */ #define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd @@ -102,6 +104,9 @@ static int dwc3_pci_probe(struct pci_dev *pci, struct dwc3_pci *glue; int ret; struct device *dev = &pci->dev; + struct dwc3_platform_data dwc3_pdata; + + memset(&dwc3_pdata, 0x00, sizeof(dwc3_pdata)); glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); if (!glue) @@ -140,6 +145,31 @@ static int dwc3_pci_probe(struct pci_dev *pci, res[1].name = "dwc_usb3"; res[1].flags = IORESOURCE_IRQ; + if (pci->vendor == PCI_VENDOR_ID_AMD && + pci->device == PCI_DEVICE_ID_AMD_NL_USB) { + dwc3_pdata.has_lpm_erratum = true; + dwc3_pdata.lpm_nyet_threshold = 0xf; + + dwc3_pdata.u2exit_lfps_quirk = true; + dwc3_pdata.u2ss_inp3_quirk = true; + dwc3_pdata.req_p1p2p3_quirk = true; + dwc3_pdata.del_p1p2p3_quirk = true; + dwc3_pdata.del_phy_power_chg_quirk = true; + dwc3_pdata.lfps_filter_quirk = true; + dwc3_pdata.rx_detect_poll_quirk = true; + + dwc3_pdata.tx_de_emphasis_quirk = true; + dwc3_pdata.tx_de_emphasis = 1; + + /* + * FIXME these quirks should be removed when AMD NL + * taps out + */ + dwc3_pdata.disable_scramble_quirk = true; + dwc3_pdata.dis_u3_susphy_quirk = true; + dwc3_pdata.dis_u2_susphy_quirk = true; + } + ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res)); if (ret) { dev_err(dev, "couldn't add resources to dwc3 device\n"); @@ -148,6 +178,10 @@ static int dwc3_pci_probe(struct pci_dev *pci, pci_set_drvdata(pci, glue); + ret = platform_device_add_data(dwc3, &dwc3_pdata, sizeof(dwc3_pdata)); + if (ret) + goto err3; + dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask); dwc3->dev.dma_mask = dev->dma_mask; @@ -185,6 +219,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index c7602b5..4a1a543 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -243,7 +243,7 @@ static int st_dwc3_probe(struct platform_device *pdev) dwc3_data->rstc_rst = devm_reset_control_get(dev, "softreset"); if (IS_ERR(dwc3_data->rstc_rst)) { dev_err(&pdev->dev, "could not get reset controller\n"); - ret = PTR_ERR(dwc3_data->rstc_pwrdn); + ret = PTR_ERR(dwc3_data->rstc_rst); goto undo_powerdown; } diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 711b230..baeedbd 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -86,6 +86,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, params.param0 = upper_32_bits(dwc->ep0_trb_addr); params.param1 = lower_32_bits(dwc->ep0_trb_addr); + trace_dwc3_prepare_trb(dep, trb); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_STARTTRANSFER, ¶ms); if (ret < 0) { @@ -441,7 +443,6 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, case USB_DEVICE_LTM_ENABLE: return -EINVAL; - break; case USB_DEVICE_TEST_MODE: if ((wIndex & 0xff) != 0) @@ -550,7 +551,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) switch (state) { case USB_STATE_DEFAULT: return -EINVAL; - break; case USB_STATE_ADDRESS: ret = dwc3_ep0_delegate_req(dwc, ctrl); @@ -700,35 +700,35 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) switch (ctrl->bRequest) { case USB_REQ_GET_STATUS: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS\n"); + dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS"); ret = dwc3_ep0_handle_status(dwc, ctrl); break; case USB_REQ_CLEAR_FEATURE: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE\n"); + dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE"); ret = dwc3_ep0_handle_feature(dwc, ctrl, 0); break; case USB_REQ_SET_FEATURE: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE\n"); + dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE"); ret = dwc3_ep0_handle_feature(dwc, ctrl, 1); break; case USB_REQ_SET_ADDRESS: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS\n"); + dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS"); ret = dwc3_ep0_set_address(dwc, ctrl); break; case USB_REQ_SET_CONFIGURATION: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION\n"); + dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION"); ret = dwc3_ep0_set_config(dwc, ctrl); break; case USB_REQ_SET_SEL: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL\n"); + dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL"); ret = dwc3_ep0_set_sel(dwc, ctrl); break; case USB_REQ_SET_ISOCH_DELAY: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY\n"); + dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY"); ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); break; default: - dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver\n"); + dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver"); ret = dwc3_ep0_delegate_req(dwc, ctrl); break; } @@ -791,6 +791,8 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, trb = dwc->ep0_trb; + trace_dwc3_complete_trb(ep0, trb); + status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (status == DWC3_TRBSTS_SETUP_PENDING) { dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); @@ -855,6 +857,8 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, dep = dwc->eps[0]; trb = dwc->ep0_trb; + trace_dwc3_complete_trb(dep, trb); + if (!list_empty(&dep->request_list)) { r = next_request(&dep->request_list); @@ -875,7 +879,7 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (status == DWC3_TRBSTS_SETUP_PENDING) - dwc3_trace(trace_dwc3_ep0, "Setup Pending received\n"); + dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 546ea54..f03b136 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1140,8 +1140,14 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, if (!dep->endpoint.desc) { dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", request, ep->name); - spin_unlock_irqrestore(&dwc->lock, flags); - return -ESHUTDOWN; + ret = -ESHUTDOWN; + goto out; + } + + if (WARN(req->dep != dep, "request %p belongs to '%s'\n", + request, req->dep->name)) { + ret = -EINVAL; + goto out; } dev_vdbg(dwc->dev, "queing request %p to %s length %d\n", @@ -1149,6 +1155,8 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, trace_dwc3_ep_queue(req); ret = __dwc3_gadget_ep_queue(dep, req); + +out: spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1622,8 +1630,7 @@ err0: return ret; } -static int dwc3_gadget_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int dwc3_gadget_stop(struct usb_gadget *g) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; @@ -2034,6 +2041,17 @@ static void dwc3_resume_gadget(struct dwc3 *dwc) if (dwc->gadget_driver && dwc->gadget_driver->resume) { spin_unlock(&dwc->lock); dwc->gadget_driver->resume(&dwc->gadget); + } +} + +static void dwc3_reset_gadget(struct dwc3 *dwc) +{ + if (!dwc->gadget_driver) + return; + + if (dwc->gadget.speed != USB_SPEED_UNKNOWN) { + spin_unlock(&dwc->lock); + usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver); spin_lock(&dwc->lock); } } @@ -2140,6 +2158,7 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; + usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED); } static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) @@ -2177,11 +2196,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) dwc3_gadget_disconnect_interrupt(dwc); } - /* after reset -> Default State */ - usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT); - - if (dwc->gadget.speed != USB_SPEED_UNKNOWN) - dwc3_disconnect_gadget(dwc); + dwc3_reset_gadget(dwc); reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; @@ -2287,11 +2302,20 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); + reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold); + /* - * TODO: This should be configurable. For now using - * maximum allowed HIRD threshold value of 0b1100 + * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and + * DCFG.LPMCap is set, core responses with an ACK and the + * BESL value in the LPM token is less than or equal to LPM + * NYET threshold. */ - reg |= DWC3_DCTL_HIRD_THRES(12); + WARN_ONCE(dwc->revision < DWC3_REVISION_240A + && dwc->has_lpm_erratum, + "LPM Erratum not available on dwc3 revisisions < 2.40a\n"); + + if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A) + reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold); dwc3_writel(dwc->regs, DWC3_DCTL, reg); } else { @@ -2744,26 +2768,13 @@ void dwc3_gadget_exit(struct dwc3 *dwc) dwc->ctrl_req, dwc->ctrl_req_addr); } -int dwc3_gadget_prepare(struct dwc3 *dwc) +int dwc3_gadget_suspend(struct dwc3 *dwc) { if (dwc->pullups_connected) { dwc3_gadget_disable_irq(dwc); dwc3_gadget_run_stop(dwc, true, true); } - return 0; -} - -void dwc3_gadget_complete(struct dwc3 *dwc) -{ - if (dwc->pullups_connected) { - dwc3_gadget_enable_irq(dwc); - dwc3_gadget_run_stop(dwc, true, false); - } -} - -int dwc3_gadget_suspend(struct dwc3 *dwc) -{ __dwc3_gadget_ep_disable(dwc->eps[0]); __dwc3_gadget_ep_disable(dwc->eps[1]); @@ -2798,6 +2809,11 @@ int dwc3_gadget_resume(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg); + if (dwc->pullups_connected) { + dwc3_gadget_enable_irq(dwc); + dwc3_gadget_run_stop(dwc, true, false); + } + return 0; err1: diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h index 7db34f0..a3a3b6d 100644 --- a/drivers/usb/dwc3/platform_data.h +++ b/drivers/usb/dwc3/platform_data.h @@ -24,4 +24,24 @@ struct dwc3_platform_data { enum usb_device_speed maximum_speed; enum usb_dr_mode dr_mode; bool tx_fifo_resize; + + unsigned is_utmi_l1_suspend:1; + u8 hird_threshold; + + u8 lpm_nyet_threshold; + + unsigned disable_scramble_quirk:1; + unsigned has_lpm_erratum:1; + unsigned u2exit_lfps_quirk:1; + unsigned u2ss_inp3_quirk:1; + unsigned req_p1p2p3_quirk:1; + unsigned del_p1p2p3_quirk:1; + unsigned del_phy_power_chg_quirk:1; + unsigned lfps_filter_quirk:1; + unsigned rx_detect_poll_quirk:1; + unsigned dis_u3_susphy_quirk:1; + unsigned dis_u2_susphy_quirk:1; + + unsigned tx_de_emphasis_quirk:1; + unsigned tx_de_emphasis:2; }; diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index 60b0f41..9fc20b3 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -61,7 +61,7 @@ DECLARE_EVENT_CLASS(dwc3_log_event, TP_fast_assign( __entry->event = event; ), - TP_printk("event %08x\n", __entry->event) + TP_printk("event %08x", __entry->event) ); DEFINE_EVENT(dwc3_log_event, dwc3_event, @@ -157,7 +157,7 @@ DECLARE_EVENT_CLASS(dwc3_log_generic_cmd, __entry->cmd = cmd; __entry->param = param; ), - TP_printk("cmd '%s' [%d] param %08x\n", + TP_printk("cmd '%s' [%d] param %08x", dwc3_gadget_generic_cmd_string(__entry->cmd), __entry->cmd, __entry->param ) @@ -175,17 +175,21 @@ DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd, TP_STRUCT__entry( __dynamic_array(char, name, DWC3_MSG_MAX) __field(unsigned int, cmd) - __field(struct dwc3_gadget_ep_cmd_params *, params) + __field(u32, param0) + __field(u32, param1) + __field(u32, param2) ), TP_fast_assign( snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name); __entry->cmd = cmd; - __entry->params = params; + __entry->param0 = params->param0; + __entry->param1 = params->param1; + __entry->param2 = params->param2; ), - TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x\n", + TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x", __get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd), - __entry->cmd, __entry->params->param0, - __entry->params->param1, __entry->params->param2 + __entry->cmd, __entry->param0, + __entry->param1, __entry->param2 ) ); @@ -214,7 +218,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, __entry->size = trb->size; __entry->ctrl = trb->ctrl; ), - TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x\n", + TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x", __get_str(name), __entry->trb, __entry->bph, __entry->bpl, __entry->size, __entry->ctrl ) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index c4880fc..747ef53 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -190,6 +190,12 @@ config USB_F_UAC2 config USB_F_UVC tristate +config USB_F_MIDI + tristate + +config USB_F_HID + tristate + choice tristate "USB Gadget Drivers" default USB_ETH @@ -362,6 +368,61 @@ config USB_CONFIGFS_F_FS implemented in kernel space (for instance Ethernet, serial or mass storage) and other are implemented in user space. +config USB_CONFIGFS_F_UAC1 + boolean "Audio Class 1.0" + depends on USB_CONFIGFS + depends on SND + select USB_LIBCOMPOSITE + select SND_PCM + select USB_F_UAC1 + help + This Audio function implements 1 AudioControl interface, + 1 AudioStreaming Interface each for USB-OUT and USB-IN. + This driver requires a real Audio codec to be present + on the device. + +config USB_CONFIGFS_F_UAC2 + boolean "Audio Class 2.0" + depends on USB_CONFIGFS + depends on SND + select USB_LIBCOMPOSITE + select SND_PCM + select USB_F_UAC2 + help + This Audio function is compatible with USB Audio Class + specification 2.0. It implements 1 AudioControl interface, + 1 AudioStreaming Interface each for USB-OUT and USB-IN. + This driver doesn't expect any real Audio codec to be present + on the device - the audio streams are simply sinked to and + sourced from a virtual ALSA sound card created. The user-space + application may choose to do whatever it wants with the data + received from the USB Host and choose to provide whatever it + wants as audio data to the USB Host. + +config USB_CONFIGFS_F_MIDI + boolean "MIDI function" + depends on USB_CONFIGFS + depends on SND + select USB_LIBCOMPOSITE + select SND_RAWMIDI + select USB_F_MIDI + help + The MIDI Function acts as a USB Audio device, with one MIDI + input and one MIDI output. These MIDI jacks appear as + a sound "card" in the ALSA sound system. Other MIDI + connections can then be made on the gadget system, using + ALSA's aconnect utility etc. + +config USB_CONFIGFS_F_HID + boolean "HID function" + depends on USB_CONFIGFS + select USB_F_HID + help + The HID function driver provides generic emulation of USB + Human Interface Devices (HID). + + For more information, see Documentation/usb/gadget_hid.txt. + source "drivers/usb/gadget/legacy/Kconfig" endchoice diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f6a51fd..6178353 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1246,10 +1246,49 @@ EXPORT_SYMBOL_GPL(usb_string_ids_n); static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) { + struct usb_composite_dev *cdev; + if (req->status || req->actual != req->length) DBG((struct usb_composite_dev *) ep->driver_data, "setup complete --> %d, %d/%d\n", req->status, req->actual, req->length); + + /* + * REVIST The same ep0 requests are shared with function drivers + * so they don't have to maintain the same ->complete() stubs. + * + * Because of that, we need to check for the validity of ->context + * here, even though we know we've set it to something useful. + */ + if (!req->context) + return; + + cdev = req->context; + + if (cdev->req == req) + cdev->setup_pending = false; + else if (cdev->os_desc_req == req) + cdev->os_desc_pending = false; + else + WARN(1, "unknown request %p\n", req); +} + +static int composite_ep0_queue(struct usb_composite_dev *cdev, + struct usb_request *req, gfp_t gfp_flags) +{ + int ret; + + ret = usb_ep_queue(cdev->gadget->ep0, req, gfp_flags); + if (ret == 0) { + if (cdev->req == req) + cdev->setup_pending = true; + else if (cdev->os_desc_req == req) + cdev->os_desc_pending = true; + else + WARN(1, "unknown request %p\n", req); + } + + return ret; } static int count_ext_compat(struct usb_configuration *c) @@ -1428,6 +1467,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) * when we delegate to it. */ req->zero = 0; + req->context = cdev; req->complete = composite_setup_complete; req->length = 0; gadget->ep0->driver_data = cdev; @@ -1624,6 +1664,7 @@ unknown: int count = 0; req = cdev->os_desc_req; + req->context = cdev; req->complete = composite_setup_complete; buf = req->buf; os_desc_cfg = cdev->os_desc_config; @@ -1686,8 +1727,9 @@ unknown: break; } req->length = value; + req->context = cdev; req->zero = value < w_length; - value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + value = composite_ep0_queue(cdev, req, GFP_ATOMIC); if (value < 0) { DBG(cdev, "ep_queue --> %d\n", value); req->status = 0; @@ -1757,8 +1799,9 @@ unknown: /* respond with data transfer before status phase? */ if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) { req->length = value; + req->context = cdev; req->zero = value < w_length; - value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + value = composite_ep0_queue(cdev, req, GFP_ATOMIC); if (value < 0) { DBG(cdev, "ep_queue --> %d\n", value); req->status = 0; @@ -1893,6 +1936,7 @@ int composite_dev_prepare(struct usb_composite_driver *composite, goto fail_dev; cdev->req->complete = composite_setup_complete; + cdev->req->context = cdev; gadget->ep0->driver_data = cdev; cdev->driver = composite; @@ -1937,6 +1981,7 @@ int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, kfree(cdev->os_desc_req); goto end; } + cdev->os_desc_req->context = cdev; cdev->os_desc_req->complete = composite_setup_complete; end: return ret; @@ -1951,10 +1996,16 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev) kfree(uc); } if (cdev->os_desc_req) { + if (cdev->os_desc_pending) + usb_ep_dequeue(cdev->gadget->ep0, cdev->os_desc_req); + kfree(cdev->os_desc_req->buf); usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req); } if (cdev->req) { + if (cdev->setup_pending) + usb_ep_dequeue(cdev->gadget->ep0, cdev->req); + kfree(cdev->req->buf); usb_ep_free_request(cdev->gadget->ep0, cdev->req); } @@ -2013,8 +2064,7 @@ fail: /*-------------------------------------------------------------------------*/ -static void -composite_suspend(struct usb_gadget *gadget) +void composite_suspend(struct usb_gadget *gadget) { struct usb_composite_dev *cdev = get_gadget_data(gadget); struct usb_function *f; @@ -2037,8 +2087,7 @@ composite_suspend(struct usb_gadget *gadget) usb_gadget_vbus_draw(gadget, 2); } -static void -composite_resume(struct usb_gadget *gadget) +void composite_resume(struct usb_gadget *gadget) { struct usb_composite_dev *cdev = get_gadget_data(gadget); struct usb_function *f; @@ -2158,7 +2207,8 @@ void usb_composite_setup_continue(struct usb_composite_dev *cdev) } else if (--cdev->delayed_status == 0) { DBG(cdev, "%s: Completing delayed status\n", __func__); req->length = 0; - value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); + req->context = cdev; + value = composite_ep0_queue(cdev, req, GFP_ATOMIC); if (value < 0) { DBG(cdev, "ep_queue --> %d\n", value); req->status = 0; diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 3403433..7564814 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -271,7 +271,7 @@ static ssize_t gadget_dev_desc_UDC_store(struct gadget_info *gi, ret = -EBUSY; goto err; } - ret = udc_attach_driver(name, &gi->composite.gadget_driver); + ret = usb_udc_attach_driver(name, &gi->composite.gadget_driver); if (ret) goto err; gi->udc_name = name; @@ -1453,6 +1453,9 @@ static const struct usb_gadget_driver configfs_driver_template = { .reset = composite_disconnect, .disconnect = composite_disconnect, + .suspend = composite_suspend, + .resume = composite_resume, + .max_speed = USB_SPEED_SUPER, .driver = { .owner = THIS_MODULE, diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile index 90701aa..dd68091 100644 --- a/drivers/usb/gadget/function/Makefile +++ b/drivers/usb/gadget/function/Makefile @@ -38,3 +38,7 @@ usb_f_uac2-y := f_uac2.o obj-$(CONFIG_USB_F_UAC2) += usb_f_uac2.o usb_f_uvc-y := f_uvc.o uvc_queue.o uvc_v4l2.o uvc_video.o obj-$(CONFIG_USB_F_UVC) += usb_f_uvc.o +usb_f_midi-y := f_midi.o +obj-$(CONFIG_USB_F_MIDI) += usb_f_midi.o +usb_f_hid-y := f_hid.o +obj-$(CONFIG_USB_F_HID) += usb_f_hid.o diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 59ab62c..488ac66 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/hid.h> +#include <linux/idr.h> #include <linux/cdev.h> #include <linux/mutex.h> #include <linux/poll.h> @@ -21,9 +22,14 @@ #include <linux/usb/g_hid.h> #include "u_f.h" +#include "u_hid.h" + +#define HIDG_MINORS 4 static int major, minors; static struct class *hidg_class; +static DEFINE_IDA(hidg_ida); +static DEFINE_MUTEX(hidg_ida_lock); /* protects access to hidg_ida */ /*-------------------------------------------------------------------------*/ /* HID gadget struct */ @@ -161,6 +167,26 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = { }; /*-------------------------------------------------------------------------*/ +/* Strings */ + +#define CT_FUNC_HID_IDX 0 + +static struct usb_string ct_func_string_defs[] = { + [CT_FUNC_HID_IDX].s = "HID Interface", + {}, /* end of list */ +}; + +static struct usb_gadget_strings ct_func_string_table = { + .language = 0x0409, /* en-US */ + .strings = ct_func_string_defs, +}; + +static struct usb_gadget_strings *ct_func_strings[] = { + &ct_func_string_table, + NULL, +}; + +/*-------------------------------------------------------------------------*/ /* Char Device */ static ssize_t f_hidg_read(struct file *file, char __user *buffer, @@ -552,13 +578,22 @@ const struct file_operations f_hidg_fops = { .llseek = noop_llseek, }; -static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) +static int hidg_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_ep *ep; struct f_hidg *hidg = func_to_hidg(f); + struct usb_string *us; + struct device *device; int status; dev_t dev; + /* maybe allocate device-global string IDs, and patch descriptors */ + us = usb_gstrings_attach(c->cdev, ct_func_strings, + ARRAY_SIZE(ct_func_string_defs)); + if (IS_ERR(us)) + return PTR_ERR(us); + hidg_interface_desc.iInterface = us[CT_FUNC_HID_IDX].id; + /* allocate instance-specific interface IDs, and patch descriptors */ status = usb_interface_id(c, f); if (status < 0) @@ -623,10 +658,16 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) if (status) goto fail_free_descs; - device_create(hidg_class, NULL, dev, NULL, "%s%d", "hidg", hidg->minor); + device = device_create(hidg_class, NULL, dev, NULL, + "%s%d", "hidg", hidg->minor); + if (IS_ERR(device)) { + status = PTR_ERR(device); + goto del; + } return 0; - +del: + cdev_del(&hidg->cdev); fail_free_descs: usb_free_all_descriptors(f); fail: @@ -640,116 +681,313 @@ fail: return status; } -static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) +static inline int hidg_get_minor(void) { - struct f_hidg *hidg = func_to_hidg(f); + int ret; - device_destroy(hidg_class, MKDEV(major, hidg->minor)); - cdev_del(&hidg->cdev); + ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL); - /* disable/free request and end point */ - usb_ep_disable(hidg->in_ep); - usb_ep_dequeue(hidg->in_ep, hidg->req); - kfree(hidg->req->buf); - usb_ep_free_request(hidg->in_ep, hidg->req); - - usb_free_all_descriptors(f); + return ret; +} - kfree(hidg->report_desc); - kfree(hidg); +static inline struct f_hid_opts *to_f_hid_opts(struct config_item *item) +{ + return container_of(to_config_group(item), struct f_hid_opts, + func_inst.group); } -/*-------------------------------------------------------------------------*/ -/* Strings */ +CONFIGFS_ATTR_STRUCT(f_hid_opts); +CONFIGFS_ATTR_OPS(f_hid_opts); -#define CT_FUNC_HID_IDX 0 +static void hid_attr_release(struct config_item *item) +{ + struct f_hid_opts *opts = to_f_hid_opts(item); -static struct usb_string ct_func_string_defs[] = { - [CT_FUNC_HID_IDX].s = "HID Interface", - {}, /* end of list */ -}; + usb_put_function_instance(&opts->func_inst); +} -static struct usb_gadget_strings ct_func_string_table = { - .language = 0x0409, /* en-US */ - .strings = ct_func_string_defs, +static struct configfs_item_operations hidg_item_ops = { + .release = hid_attr_release, + .show_attribute = f_hid_opts_attr_show, + .store_attribute = f_hid_opts_attr_store, }; -static struct usb_gadget_strings *ct_func_strings[] = { - &ct_func_string_table, +#define F_HID_OPT(name, prec, limit) \ +static ssize_t f_hid_opts_##name##_show(struct f_hid_opts *opts, char *page)\ +{ \ + int result; \ + \ + mutex_lock(&opts->lock); \ + result = sprintf(page, "%d\n", opts->name); \ + mutex_unlock(&opts->lock); \ + \ + return result; \ +} \ + \ +static ssize_t f_hid_opts_##name##_store(struct f_hid_opts *opts, \ + const char *page, size_t len) \ +{ \ + int ret; \ + u##prec num; \ + \ + mutex_lock(&opts->lock); \ + if (opts->refcnt) { \ + ret = -EBUSY; \ + goto end; \ + } \ + \ + ret = kstrtou##prec(page, 0, &num); \ + if (ret) \ + goto end; \ + \ + if (num > limit) { \ + ret = -EINVAL; \ + goto end; \ + } \ + opts->name = num; \ + ret = len; \ + \ +end: \ + mutex_unlock(&opts->lock); \ + return ret; \ +} \ + \ +static struct f_hid_opts_attribute f_hid_opts_##name = \ + __CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR, f_hid_opts_##name##_show,\ + f_hid_opts_##name##_store) + +F_HID_OPT(subclass, 8, 255); +F_HID_OPT(protocol, 8, 255); +F_HID_OPT(report_length, 16, 65536); + +static ssize_t f_hid_opts_report_desc_show(struct f_hid_opts *opts, char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = opts->report_desc_length; + memcpy(page, opts->report_desc, opts->report_desc_length); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t f_hid_opts_report_desc_store(struct f_hid_opts *opts, + const char *page, size_t len) +{ + int ret = -EBUSY; + char *d; + + mutex_lock(&opts->lock); + + if (opts->refcnt) + goto end; + if (len > PAGE_SIZE) { + ret = -ENOSPC; + goto end; + } + d = kmemdup(page, len, GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto end; + } + kfree(opts->report_desc); + opts->report_desc = d; + opts->report_desc_length = len; + opts->report_desc_alloc = true; + ret = len; +end: + mutex_unlock(&opts->lock); + return ret; +} + +static struct f_hid_opts_attribute f_hid_opts_report_desc = + __CONFIGFS_ATTR(report_desc, S_IRUGO | S_IWUSR, + f_hid_opts_report_desc_show, + f_hid_opts_report_desc_store); + +static struct configfs_attribute *hid_attrs[] = { + &f_hid_opts_subclass.attr, + &f_hid_opts_protocol.attr, + &f_hid_opts_report_length.attr, + &f_hid_opts_report_desc.attr, NULL, }; -/*-------------------------------------------------------------------------*/ -/* usb_configuration */ +static struct config_item_type hid_func_type = { + .ct_item_ops = &hidg_item_ops, + .ct_attrs = hid_attrs, + .ct_owner = THIS_MODULE, +}; -int __init hidg_bind_config(struct usb_configuration *c, - struct hidg_func_descriptor *fdesc, int index) +static inline void hidg_put_minor(int minor) { - struct f_hidg *hidg; - int status; + ida_simple_remove(&hidg_ida, minor); +} - if (index >= minors) - return -ENOENT; +static void hidg_free_inst(struct usb_function_instance *f) +{ + struct f_hid_opts *opts; - /* maybe allocate device-global string IDs, and patch descriptors */ - if (ct_func_string_defs[CT_FUNC_HID_IDX].id == 0) { - status = usb_string_id(c->cdev); - if (status < 0) - return status; - ct_func_string_defs[CT_FUNC_HID_IDX].id = status; - hidg_interface_desc.iInterface = status; + opts = container_of(f, struct f_hid_opts, func_inst); + + mutex_lock(&hidg_ida_lock); + + hidg_put_minor(opts->minor); + if (idr_is_empty(&hidg_ida.idr)) + ghid_cleanup(); + + mutex_unlock(&hidg_ida_lock); + + if (opts->report_desc_alloc) + kfree(opts->report_desc); + + kfree(opts); +} + +static struct usb_function_instance *hidg_alloc_inst(void) +{ + struct f_hid_opts *opts; + struct usb_function_instance *ret; + int status = 0; + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + mutex_init(&opts->lock); + opts->func_inst.free_func_inst = hidg_free_inst; + ret = &opts->func_inst; + + mutex_lock(&hidg_ida_lock); + + if (idr_is_empty(&hidg_ida.idr)) { + status = ghid_setup(NULL, HIDG_MINORS); + if (status) { + ret = ERR_PTR(status); + kfree(opts); + goto unlock; + } + } + + opts->minor = hidg_get_minor(); + if (opts->minor < 0) { + ret = ERR_PTR(opts->minor); + kfree(opts); + if (idr_is_empty(&hidg_ida.idr)) + ghid_cleanup(); + goto unlock; } + config_group_init_type_name(&opts->func_inst.group, "", &hid_func_type); + +unlock: + mutex_unlock(&hidg_ida_lock); + return ret; +} + +static void hidg_free(struct usb_function *f) +{ + struct f_hidg *hidg; + struct f_hid_opts *opts; + + hidg = func_to_hidg(f); + opts = container_of(f->fi, struct f_hid_opts, func_inst); + kfree(hidg->report_desc); + kfree(hidg); + mutex_lock(&opts->lock); + --opts->refcnt; + mutex_unlock(&opts->lock); +} + +static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_hidg *hidg = func_to_hidg(f); + + device_destroy(hidg_class, MKDEV(major, hidg->minor)); + cdev_del(&hidg->cdev); + + /* disable/free request and end point */ + usb_ep_disable(hidg->in_ep); + usb_ep_dequeue(hidg->in_ep, hidg->req); + kfree(hidg->req->buf); + usb_ep_free_request(hidg->in_ep, hidg->req); + + usb_free_all_descriptors(f); +} + +static struct usb_function *hidg_alloc(struct usb_function_instance *fi) +{ + struct f_hidg *hidg; + struct f_hid_opts *opts; /* allocate and initialize one new instance */ - hidg = kzalloc(sizeof *hidg, GFP_KERNEL); + hidg = kzalloc(sizeof(*hidg), GFP_KERNEL); if (!hidg) - return -ENOMEM; - - hidg->minor = index; - hidg->bInterfaceSubClass = fdesc->subclass; - hidg->bInterfaceProtocol = fdesc->protocol; - hidg->report_length = fdesc->report_length; - hidg->report_desc_length = fdesc->report_desc_length; - hidg->report_desc = kmemdup(fdesc->report_desc, - fdesc->report_desc_length, - GFP_KERNEL); - if (!hidg->report_desc) { - kfree(hidg); - return -ENOMEM; + return ERR_PTR(-ENOMEM); + + opts = container_of(fi, struct f_hid_opts, func_inst); + + mutex_lock(&opts->lock); + ++opts->refcnt; + + hidg->minor = opts->minor; + hidg->bInterfaceSubClass = opts->subclass; + hidg->bInterfaceProtocol = opts->protocol; + hidg->report_length = opts->report_length; + hidg->report_desc_length = opts->report_desc_length; + if (opts->report_desc) { + hidg->report_desc = kmemdup(opts->report_desc, + opts->report_desc_length, + GFP_KERNEL); + if (!hidg->report_desc) { + kfree(hidg); + mutex_unlock(&opts->lock); + return ERR_PTR(-ENOMEM); + } } + mutex_unlock(&opts->lock); + hidg->func.name = "hid"; - hidg->func.strings = ct_func_strings; hidg->func.bind = hidg_bind; hidg->func.unbind = hidg_unbind; hidg->func.set_alt = hidg_set_alt; hidg->func.disable = hidg_disable; hidg->func.setup = hidg_setup; + hidg->func.free_func = hidg_free; /* this could me made configurable at some point */ hidg->qlen = 4; - status = usb_add_function(c, &hidg->func); - if (status) - kfree(hidg); - - return status; + return &hidg->func; } -int __init ghid_setup(struct usb_gadget *g, int count) +DECLARE_USB_FUNCTION_INIT(hid, hidg_alloc_inst, hidg_alloc); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Fabien Chouteau"); + +int ghid_setup(struct usb_gadget *g, int count) { int status; dev_t dev; hidg_class = class_create(THIS_MODULE, "hidg"); + if (IS_ERR(hidg_class)) { + status = PTR_ERR(hidg_class); + hidg_class = NULL; + return status; + } status = alloc_chrdev_region(&dev, 0, count, "hidg"); - if (!status) { - major = MAJOR(dev); - minors = count; + if (status) { + class_destroy(hidg_class); + hidg_class = NULL; + return status; } - return status; + major = MAJOR(dev); + minors = count; + + return 0; } void ghid_cleanup(void) diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 807b31c..a904403 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -20,6 +20,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/device.h> @@ -33,6 +34,7 @@ #include <linux/usb/midi.h> #include "u_f.h" +#include "u_midi.h" MODULE_AUTHOR("Ben Williamson"); MODULE_LICENSE("GPL v2"); @@ -99,7 +101,7 @@ DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16); /* B.3.1 Standard AC Interface Descriptor */ -static struct usb_interface_descriptor ac_interface_desc __initdata = { +static struct usb_interface_descriptor ac_interface_desc = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ @@ -110,7 +112,7 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = { }; /* B.3.2 Class-Specific AC Interface Descriptor */ -static struct uac1_ac_header_descriptor_1 ac_header_desc __initdata = { +static struct uac1_ac_header_descriptor_1 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, @@ -121,7 +123,7 @@ static struct uac1_ac_header_descriptor_1 ac_header_desc __initdata = { }; /* B.4.1 Standard MS Interface Descriptor */ -static struct usb_interface_descriptor ms_interface_desc __initdata = { +static struct usb_interface_descriptor ms_interface_desc = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ @@ -132,7 +134,7 @@ static struct usb_interface_descriptor ms_interface_desc __initdata = { }; /* B.4.2 Class-Specific MS Interface Descriptor */ -static struct usb_ms_header_descriptor ms_header_desc __initdata = { +static struct usb_ms_header_descriptor ms_header_desc = { .bLength = USB_DT_MS_HEADER_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, @@ -387,29 +389,6 @@ static void f_midi_disable(struct usb_function *f) usb_ep_disable(midi->out_ep); } -static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f) -{ - struct usb_composite_dev *cdev = f->config->cdev; - struct f_midi *midi = func_to_midi(f); - struct snd_card *card; - - DBG(cdev, "unbind\n"); - - /* just to be sure */ - f_midi_disable(f); - - card = midi->card; - midi->card = NULL; - if (card) - snd_card_free(card); - - kfree(midi->id); - midi->id = NULL; - - usb_free_all_descriptors(f); - kfree(midi); -} - static int f_midi_snd_free(struct snd_device *device) { return 0; @@ -654,6 +633,14 @@ static struct snd_rawmidi_ops gmidi_out_ops = { .trigger = f_midi_out_trigger }; +static inline void f_midi_unregister_card(struct f_midi *midi) +{ + if (midi->card) { + snd_card_free(midi->card); + midi->card = NULL; + } +} + /* register as a sound "card" */ static int f_midi_register_card(struct f_midi *midi) { @@ -715,17 +702,13 @@ static int f_midi_register_card(struct f_midi *midi) return 0; fail: - if (midi->card) { - snd_card_free(midi->card); - midi->card = NULL; - } + f_midi_unregister_card(midi); return err; } /* MIDI function driver setup/binding */ -static int __init -f_midi_bind(struct usb_configuration *c, struct usb_function *f) +static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_descriptor_header **midi_function; struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS]; @@ -734,15 +717,23 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f) struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS]; struct usb_composite_dev *cdev = c->cdev; struct f_midi *midi = func_to_midi(f); + struct usb_string *us; int status, n, jack = 1, i = 0; + midi->gadget = cdev->gadget; + tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi); + status = f_midi_register_card(midi); + if (status < 0) + goto fail_register; + /* maybe allocate device-global string ID */ - if (midi_string_defs[0].id == 0) { - status = usb_string_id(c->cdev); - if (status < 0) - goto fail; - midi_string_defs[0].id = status; + us = usb_gstrings_attach(c->cdev, midi_strings, + ARRAY_SIZE(midi_string_defs)); + if (IS_ERR(us)) { + status = PTR_ERR(us); + goto fail; } + ac_interface_desc.iInterface = us[STRING_FUNC_IDX].id; /* We have two interfaces, AudioControl and MIDIStreaming */ status = usb_interface_id(c, f); @@ -892,6 +883,8 @@ fail_f_midi: kfree(midi_function); usb_free_descriptors(f->hs_descriptors); fail: + f_midi_unregister_card(midi); +fail_register: /* we might as well release our claims on endpoints */ if (midi->out_ep) midi->out_ep->driver_data = NULL; @@ -903,42 +896,235 @@ fail: return status; } -/** - * f_midi_bind_config - add USB MIDI function to a configuration - * @c: the configuration to supcard the USB audio function - * @index: the soundcard index to use for the ALSA device creation - * @id: the soundcard id to use for the ALSA device creation - * @buflen: the buffer length to use - * @qlen the number of read requests to pre-allocate - * Context: single threaded during gadget setup - * - * Returns zero on success, else negative errno. - */ -int __init f_midi_bind_config(struct usb_configuration *c, - int index, char *id, - unsigned int in_ports, - unsigned int out_ports, - unsigned int buflen, - unsigned int qlen) +static inline struct f_midi_opts *to_f_midi_opts(struct config_item *item) +{ + return container_of(to_config_group(item), struct f_midi_opts, + func_inst.group); +} + +CONFIGFS_ATTR_STRUCT(f_midi_opts); +CONFIGFS_ATTR_OPS(f_midi_opts); + +static void midi_attr_release(struct config_item *item) +{ + struct f_midi_opts *opts = to_f_midi_opts(item); + + usb_put_function_instance(&opts->func_inst); +} + +static struct configfs_item_operations midi_item_ops = { + .release = midi_attr_release, + .show_attribute = f_midi_opts_attr_show, + .store_attribute = f_midi_opts_attr_store, +}; + +#define F_MIDI_OPT(name, test_limit, limit) \ +static ssize_t f_midi_opts_##name##_show(struct f_midi_opts *opts, char *page) \ +{ \ + int result; \ + \ + mutex_lock(&opts->lock); \ + result = sprintf(page, "%d\n", opts->name); \ + mutex_unlock(&opts->lock); \ + \ + return result; \ +} \ + \ +static ssize_t f_midi_opts_##name##_store(struct f_midi_opts *opts, \ + const char *page, size_t len) \ +{ \ + int ret; \ + u32 num; \ + \ + mutex_lock(&opts->lock); \ + if (opts->refcnt) { \ + ret = -EBUSY; \ + goto end; \ + } \ + \ + ret = kstrtou32(page, 0, &num); \ + if (ret) \ + goto end; \ + \ + if (test_limit && num > limit) { \ + ret = -EINVAL; \ + goto end; \ + } \ + opts->name = num; \ + ret = len; \ + \ +end: \ + mutex_unlock(&opts->lock); \ + return ret; \ +} \ + \ +static struct f_midi_opts_attribute f_midi_opts_##name = \ + __CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR, f_midi_opts_##name##_show, \ + f_midi_opts_##name##_store) + +F_MIDI_OPT(index, true, SNDRV_CARDS); +F_MIDI_OPT(buflen, false, 0); +F_MIDI_OPT(qlen, false, 0); +F_MIDI_OPT(in_ports, true, MAX_PORTS); +F_MIDI_OPT(out_ports, true, MAX_PORTS); + +static ssize_t f_midi_opts_id_show(struct f_midi_opts *opts, char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = strlcpy(page, opts->id, PAGE_SIZE); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t f_midi_opts_id_store(struct f_midi_opts *opts, + const char *page, size_t len) +{ + int ret; + char *c; + + mutex_lock(&opts->lock); + if (opts->refcnt) { + ret = -EBUSY; + goto end; + } + + c = kstrndup(page, len, GFP_KERNEL); + if (!c) { + ret = -ENOMEM; + goto end; + } + if (opts->id_allocated) + kfree(opts->id); + opts->id = c; + opts->id_allocated = true; + ret = len; +end: + mutex_unlock(&opts->lock); + return ret; +} + +static struct f_midi_opts_attribute f_midi_opts_id = + __CONFIGFS_ATTR(id, S_IRUGO | S_IWUSR, f_midi_opts_id_show, + f_midi_opts_id_store); + +static struct configfs_attribute *midi_attrs[] = { + &f_midi_opts_index.attr, + &f_midi_opts_buflen.attr, + &f_midi_opts_qlen.attr, + &f_midi_opts_in_ports.attr, + &f_midi_opts_out_ports.attr, + &f_midi_opts_id.attr, + NULL, +}; + +static struct config_item_type midi_func_type = { + .ct_item_ops = &midi_item_ops, + .ct_attrs = midi_attrs, + .ct_owner = THIS_MODULE, +}; + +static void f_midi_free_inst(struct usb_function_instance *f) +{ + struct f_midi_opts *opts; + + opts = container_of(f, struct f_midi_opts, func_inst); + + if (opts->id_allocated) + kfree(opts->id); + + kfree(opts); +} + +static struct usb_function_instance *f_midi_alloc_inst(void) +{ + struct f_midi_opts *opts; + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + + mutex_init(&opts->lock); + opts->func_inst.free_func_inst = f_midi_free_inst; + opts->index = SNDRV_DEFAULT_IDX1; + opts->id = SNDRV_DEFAULT_STR1; + opts->buflen = 256; + opts->qlen = 32; + opts->in_ports = 1; + opts->out_ports = 1; + + config_group_init_type_name(&opts->func_inst.group, "", + &midi_func_type); + + return &opts->func_inst; +} + +static void f_midi_free(struct usb_function *f) +{ + struct f_midi *midi; + struct f_midi_opts *opts; + int i; + + midi = func_to_midi(f); + opts = container_of(f->fi, struct f_midi_opts, func_inst); + kfree(midi->id); + mutex_lock(&opts->lock); + for (i = opts->in_ports - 1; i >= 0; --i) + kfree(midi->in_port[i]); + kfree(midi); + --opts->refcnt; + mutex_unlock(&opts->lock); +} + +static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = f->config->cdev; + struct f_midi *midi = func_to_midi(f); + struct snd_card *card; + + DBG(cdev, "unbind\n"); + + /* just to be sure */ + f_midi_disable(f); + + card = midi->card; + midi->card = NULL; + if (card) + snd_card_free(card); + + usb_free_all_descriptors(f); +} + +static struct usb_function *f_midi_alloc(struct usb_function_instance *fi) { struct f_midi *midi; + struct f_midi_opts *opts; int status, i; + opts = container_of(fi, struct f_midi_opts, func_inst); + + mutex_lock(&opts->lock); /* sanity check */ - if (in_ports > MAX_PORTS || out_ports > MAX_PORTS) - return -EINVAL; + if (opts->in_ports > MAX_PORTS || opts->out_ports > MAX_PORTS) { + mutex_unlock(&opts->lock); + return ERR_PTR(-EINVAL); + } /* allocate and initialize one new instance */ - midi = kzalloc(sizeof *midi, GFP_KERNEL); + midi = kzalloc(sizeof(*midi), GFP_KERNEL); if (!midi) { - status = -ENOMEM; - goto fail; + mutex_unlock(&opts->lock); + return ERR_PTR(-ENOMEM); } - for (i = 0; i < in_ports; i++) { + for (i = 0; i < opts->in_ports; i++) { struct gmidi_in_port *port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) { status = -ENOMEM; + mutex_unlock(&opts->lock); goto setup_fail; } @@ -948,39 +1134,37 @@ int __init f_midi_bind_config(struct usb_configuration *c, midi->in_port[i] = port; } - midi->gadget = c->cdev->gadget; - tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi); - /* set up ALSA midi devices */ - midi->in_ports = in_ports; - midi->out_ports = out_ports; - status = f_midi_register_card(midi); - if (status < 0) - goto setup_fail; - - midi->func.name = "gmidi function"; - midi->func.strings = midi_strings; - midi->func.bind = f_midi_bind; - midi->func.unbind = f_midi_unbind; - midi->func.set_alt = f_midi_set_alt; - midi->func.disable = f_midi_disable; - - midi->id = kstrdup(id, GFP_KERNEL); - midi->index = index; - midi->buflen = buflen; - midi->qlen = qlen; - - status = usb_add_function(c, &midi->func); - if (status) - goto setup_fail; - - return 0; - + midi->id = kstrdup(opts->id, GFP_KERNEL); + if (opts->id && !midi->id) { + status = -ENOMEM; + mutex_unlock(&opts->lock); + goto kstrdup_fail; + } + midi->in_ports = opts->in_ports; + midi->out_ports = opts->out_ports; + midi->index = opts->index; + midi->buflen = opts->buflen; + midi->qlen = opts->qlen; + ++opts->refcnt; + mutex_unlock(&opts->lock); + + midi->func.name = "gmidi function"; + midi->func.bind = f_midi_bind; + midi->func.unbind = f_midi_unbind; + midi->func.set_alt = f_midi_set_alt; + midi->func.disable = f_midi_disable; + midi->func.free_func = f_midi_free; + + return &midi->func; + +kstrdup_fail: + f_midi_unregister_card(midi); setup_fail: for (--i; i >= 0; i--) kfree(midi->in_port[i]); kfree(midi); -fail: - return status; + return ERR_PTR(status); } +DECLARE_USB_FUNCTION_INIT(midi, f_midi_alloc_inst, f_midi_alloc); diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 16361b0..bdcda9f 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1441,6 +1441,9 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function, NULL); + if (status) + goto fail; + /* * NOTE: all that is done without knowing or caring about * the network link ... which is unavailable to this code diff --git a/drivers/usb/gadget/function/f_rndis.c b/drivers/usb/gadget/function/f_rndis.c index f13fc6a..829edf8 100644 --- a/drivers/usb/gadget/function/f_rndis.c +++ b/drivers/usb/gadget/function/f_rndis.c @@ -375,8 +375,7 @@ static struct sk_buff *rndis_add_header(struct gether *port, struct sk_buff *skb2; skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type)); - if (skb2) - rndis_add_hdr(skb2); + rndis_add_hdr(skb2); dev_kfree_skb(skb); return skb2; diff --git a/drivers/usb/gadget/function/u_hid.h b/drivers/usb/gadget/function/u_hid.h new file mode 100644 index 0000000..aaa0e36 --- /dev/null +++ b/drivers/usb/gadget/function/u_hid.h @@ -0,0 +1,42 @@ +/* + * u_hid.h + * + * Utility definitions for the hid function + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef U_HID_H +#define U_HID_H + +#include <linux/usb/composite.h> + +struct f_hid_opts { + struct usb_function_instance func_inst; + int minor; + unsigned char subclass; + unsigned char protocol; + unsigned short report_length; + unsigned short report_desc_length; + unsigned char *report_desc; + bool report_desc_alloc; + + /* + * Protect the data form concurrent access by read/write + * and create symlink/remove symlink. + */ + struct mutex lock; + int refcnt; +}; + +int ghid_setup(struct usb_gadget *g, int count); +void ghid_cleanup(void); + +#endif /* U_HID_H */ diff --git a/drivers/usb/gadget/function/u_midi.h b/drivers/usb/gadget/function/u_midi.h new file mode 100644 index 0000000..2251018 --- /dev/null +++ b/drivers/usb/gadget/function/u_midi.h @@ -0,0 +1,40 @@ +/* + * u_midi.h + * + * Utility definitions for the midi function + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef U_MIDI_H +#define U_MIDI_H + +#include <linux/usb/composite.h> + +struct f_midi_opts { + struct usb_function_instance func_inst; + int index; + char *id; + bool id_allocated; + unsigned int in_ports; + unsigned int out_ports; + unsigned int buflen; + unsigned int qlen; + + /* + * Protect the data form concurrent access by read/write + * and create symlink/remove symlink. + */ + struct mutex lock; + int refcnt; +}; + +#endif /* U_MIDI_H */ + diff --git a/drivers/usb/gadget/function/u_uac1.c b/drivers/usb/gadget/function/u_uac1.c index a44a07f..53842a1 100644 --- a/drivers/usb/gadget/function/u_uac1.c +++ b/drivers/usb/gadget/function/u_uac1.c @@ -213,9 +213,6 @@ static int gaudio_open_snd_dev(struct gaudio *card) fn_cap = opts->fn_cap; fn_cntl = opts->fn_cntl; - if (!card) - return -ENODEV; - /* Open control device */ snd = &card->control; snd->filp = filp_open(fn_cntl, O_RDWR, 0); diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 24392d2..fd48ef3 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -287,6 +287,7 @@ config USB_MIDI_GADGET depends on SND select USB_LIBCOMPOSITE select SND_RAWMIDI + select USB_F_MIDI help The MIDI Gadget acts as a USB Audio device, with one MIDI input and one MIDI output. These MIDI jacks appear as @@ -419,6 +420,7 @@ endif # TTY config USB_G_HID tristate "HID Gadget" select USB_LIBCOMPOSITE + select USB_F_HID help The HID gadget driver provides generic emulation of USB Human Interface Devices (HID). diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c index 1b07513..633683a 100644 --- a/drivers/usb/gadget/legacy/dbgp.c +++ b/drivers/usb/gadget/legacy/dbgp.c @@ -237,7 +237,7 @@ static void dbgp_unbind(struct usb_gadget *gadget) static unsigned char tty_line; #endif -static int __init dbgp_configure_endpoints(struct usb_gadget *gadget) +static int dbgp_configure_endpoints(struct usb_gadget *gadget) { int stp; @@ -273,19 +273,10 @@ static int __init dbgp_configure_endpoints(struct usb_gadget *gadget) dbgp.serial->in->desc = &i_desc; dbgp.serial->out->desc = &o_desc; - - if (gserial_alloc_line(&tty_line)) { - stp = 3; - goto fail_3; - } +#endif return 0; -fail_3: - dbgp.o_ep->driver_data = NULL; -#else - return 0; -#endif fail_2: dbgp.i_ep->driver_data = NULL; fail_1: @@ -324,10 +315,17 @@ static int __init dbgp_bind(struct usb_gadget *gadget, err = -ENOMEM; goto fail; } + + if (gserial_alloc_line(&tty_line)) { + stp = 4; + err = -ENODEV; + goto fail; + } #endif + err = dbgp_configure_endpoints(gadget); if (err < 0) { - stp = 4; + stp = 5; goto fail; } @@ -383,6 +381,10 @@ static int dbgp_setup(struct usb_gadget *gadget, #ifdef CONFIG_USB_G_DBGP_PRINTK err = dbgp_enable_ep(); #else + err = dbgp_configure_endpoints(gadget); + if (err < 0) { + goto fail; + } err = gserial_connect(dbgp.serial, tty_line); #endif if (err < 0) diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c index 3d696b8..e02a095 100644 --- a/drivers/usb/gadget/legacy/gmidi.c +++ b/drivers/usb/gadget/legacy/gmidi.c @@ -37,7 +37,7 @@ #include "gadget_chips.h" -#include "f_midi.c" +#include "u_midi.h" /*-------------------------------------------------------------------------*/ @@ -115,8 +115,13 @@ static struct usb_gadget_strings *dev_strings[] = { NULL, }; +static struct usb_function_instance *fi_midi; +static struct usb_function *f_midi; + static int __exit midi_unbind(struct usb_composite_dev *dev) { + usb_put_function(f_midi); + usb_put_function_instance(fi_midi); return 0; } @@ -130,28 +135,54 @@ static struct usb_configuration midi_config = { static int __init midi_bind_config(struct usb_configuration *c) { - return f_midi_bind_config(c, index, id, - in_ports, out_ports, - buflen, qlen); + int status; + + f_midi = usb_get_function(fi_midi); + if (IS_ERR(f_midi)) + return PTR_ERR(f_midi); + + status = usb_add_function(c, f_midi); + if (status < 0) { + usb_put_function(f_midi); + return status; + } + + return 0; } static int __init midi_bind(struct usb_composite_dev *cdev) { + struct f_midi_opts *midi_opts; int status; + fi_midi = usb_get_function_instance("midi"); + if (IS_ERR(fi_midi)) + return PTR_ERR(fi_midi); + + midi_opts = container_of(fi_midi, struct f_midi_opts, func_inst); + midi_opts->index = index; + midi_opts->id = id; + midi_opts->in_ports = in_ports; + midi_opts->out_ports = out_ports; + midi_opts->buflen = buflen; + midi_opts->qlen = qlen; + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) - return status; + goto put; device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id; status = usb_add_config(cdev, &midi_config, midi_bind_config); if (status < 0) - return status; + goto put; usb_composite_overwrite_options(cdev, &coverwrite); pr_info("%s\n", longname); return 0; +put: + usb_put_function_instance(fi_midi); + return status; } static __refdata struct usb_composite_driver midi_driver = { diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c index 778613eb..633fe7e 100644 --- a/drivers/usb/gadget/legacy/hid.c +++ b/drivers/usb/gadget/legacy/hid.c @@ -17,11 +17,14 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/usb/composite.h> +#include <linux/usb/g_hid.h> #include "gadget_chips.h" #define DRIVER_DESC "HID Gadget" #define DRIVER_VERSION "2010/03/16" +#include "u_hid.h" + /*-------------------------------------------------------------------------*/ #define HIDG_VENDOR_NUM 0x0525 /* XXX NetChip */ @@ -29,17 +32,9 @@ /*-------------------------------------------------------------------------*/ -/* - * kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "f_hid.c" - - struct hidg_func_node { + struct usb_function_instance *fi; + struct usb_function *f; struct list_head node; struct hidg_func_descriptor *func; }; @@ -113,8 +108,8 @@ static struct usb_gadget_strings *dev_strings[] = { static int __init do_config(struct usb_configuration *c) { - struct hidg_func_node *e; - int func = 0, status = 0; + struct hidg_func_node *e, *n; + int status = 0; if (gadget_is_otg(c->cdev->gadget)) { c->descriptors = otg_desc; @@ -122,11 +117,24 @@ static int __init do_config(struct usb_configuration *c) } list_for_each_entry(e, &hidg_func_list, node) { - status = hidg_bind_config(c, e->func, func++); - if (status) - break; + e->f = usb_get_function(e->fi); + if (IS_ERR(e->f)) + goto put; + status = usb_add_function(c, e->f); + if (status < 0) { + usb_put_function(e->f); + goto put; + } } + return 0; +put: + list_for_each_entry(n, &hidg_func_list, node) { + if (n == e) + break; + usb_remove_function(c, n->f); + usb_put_function(n->f); + } return status; } @@ -143,6 +151,8 @@ static int __init hid_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct list_head *tmp; + struct hidg_func_node *n, *m; + struct f_hid_opts *hid_opts; int status, funcs = 0; list_for_each(tmp, &hidg_func_list) @@ -151,10 +161,20 @@ static int __init hid_bind(struct usb_composite_dev *cdev) if (!funcs) return -ENODEV; - /* set up HID */ - status = ghid_setup(cdev->gadget, funcs); - if (status < 0) - return status; + list_for_each_entry(n, &hidg_func_list, node) { + n->fi = usb_get_function_instance("hid"); + if (IS_ERR(n->fi)) { + status = PTR_ERR(n->fi); + goto put; + } + hid_opts = container_of(n->fi, struct f_hid_opts, func_inst); + hid_opts->subclass = n->func->subclass; + hid_opts->protocol = n->func->protocol; + hid_opts->report_length = n->func->report_length; + hid_opts->report_desc_length = n->func->report_desc_length; + hid_opts->report_desc = n->func->report_desc; + } + /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. @@ -162,24 +182,37 @@ static int __init hid_bind(struct usb_composite_dev *cdev) status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) - return status; + goto put; device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &config_driver, do_config); if (status < 0) - return status; + goto put; usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); return 0; + +put: + list_for_each_entry(m, &hidg_func_list, node) { + if (m == n) + break; + usb_put_function_instance(m->fi); + } + return status; } static int __exit hid_unbind(struct usb_composite_dev *cdev) { - ghid_cleanup(); + struct hidg_func_node *n; + + list_for_each_entry(n, &hidg_func_list, node) { + usb_put_function(n->f); + usb_put_function_instance(n->fi); + } return 0; } @@ -260,7 +293,7 @@ module_init(hidg_init); static void __exit hidg_cleanup(void) { - platform_driver_unregister(&hidg_plat_driver); usb_composite_unregister(&hidg_driver); + platform_driver_unregister(&hidg_plat_driver); } module_exit(hidg_cleanup); diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c index 6474081..90545980 100644 --- a/drivers/usb/gadget/legacy/printer.c +++ b/drivers/usb/gadget/legacy/printer.c @@ -208,6 +208,43 @@ static struct usb_descriptor_header *hs_printer_function[] = { NULL }; +/* + * Added endpoint descriptors for 3.0 devices + */ + +static struct usb_endpoint_descriptor ss_ep_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = { + .bLength = sizeof(ss_ep_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_endpoint_descriptor ss_ep_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = { + .bLength = sizeof(ss_ep_out_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, +}; + +static struct usb_descriptor_header *ss_printer_function[] = { + (struct usb_descriptor_header *) &intf_desc, + (struct usb_descriptor_header *) &ss_ep_in_desc, + (struct usb_descriptor_header *) &ss_ep_in_comp_desc, + (struct usb_descriptor_header *) &ss_ep_out_desc, + (struct usb_descriptor_header *) &ss_ep_out_comp_desc, + NULL +}; + static struct usb_otg_descriptor otg_descriptor = { .bLength = sizeof otg_descriptor, .bDescriptorType = USB_DT_OTG, @@ -220,7 +257,20 @@ static const struct usb_descriptor_header *otg_desc[] = { }; /* maxpacket and other transfer characteristics vary by speed. */ -#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs)) +static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *fs, + struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *ss) +{ + switch (gadget->speed) { + case USB_SPEED_SUPER: + return ss; + case USB_SPEED_HIGH: + return hs; + default: + return fs; + } +} /*-------------------------------------------------------------------------*/ @@ -793,11 +843,12 @@ set_printer_interface(struct printer_dev *dev) { int result = 0; - dev->in_ep->desc = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc); + dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc, + &ss_ep_in_desc); dev->in_ep->driver_data = dev; - dev->out_ep->desc = ep_desc(dev->gadget, &hs_ep_out_desc, - &fs_ep_out_desc); + dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc, + &hs_ep_out_desc, &ss_ep_out_desc); dev->out_ep->driver_data = dev; result = usb_ep_enable(dev->in_ep); @@ -1016,9 +1067,11 @@ autoconf_fail: /* assumes that all endpoints are dual-speed */ hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; + ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; + ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; ret = usb_assign_descriptors(f, fs_printer_function, - hs_printer_function, NULL); + hs_printer_function, ss_printer_function); if (ret) return ret; @@ -1253,7 +1306,7 @@ static __refdata struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, .strings = dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = printer_bind, .unbind = printer_unbind, }; diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 217365d..b8e213e 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -241,6 +241,8 @@ config USB_M66592 dynamically linked module called "m66592_udc" and force all gadget drivers to also be dynamically linked. +source "drivers/usb/gadget/udc/bdc/Kconfig" + # # Controllers available only in discrete form (and all PCI controllers) # diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index a7f4491..fba2049 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_USB_FOTG210_UDC) += fotg210-udc.o obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o obj-$(CONFIG_USB_GR_UDC) += gr_udc.o obj-$(CONFIG_USB_GADGET_XILINX) += udc-xilinx.o +obj-$(CONFIG_USB_BDC_UDC) += bdc/ diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c index 3b9d138..de7e5e2 100644 --- a/drivers/usb/gadget/udc/amd5536udc.c +++ b/drivers/usb/gadget/udc/amd5536udc.c @@ -1401,9 +1401,8 @@ static int udc_wakeup(struct usb_gadget *gadget) static int amd5536_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int amd5536_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); -/* gadget operations */ +static int amd5536_udc_stop(struct usb_gadget *g); + static const struct usb_gadget_ops udc_ops = { .wakeup = udc_wakeup, .get_frame = udc_get_frame, @@ -1962,8 +1961,7 @@ __acquires(dev->lock) } /* Called by gadget driver to unregister itself */ -static int amd5536_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int amd5536_udc_stop(struct usb_gadget *g) { struct udc *dev = to_amd5536_udc(g); unsigned long flags; @@ -1971,7 +1969,7 @@ static int amd5536_udc_stop(struct usb_gadget *g, spin_lock_irqsave(&dev->lock, flags); udc_mask_unused_interrupts(dev); - shutdown(dev, driver); + shutdown(dev, NULL); spin_unlock_irqrestore(&dev->lock, flags); dev->driver = NULL; @@ -2873,7 +2871,7 @@ __acquires(dev->lock) dev->driver->resume(&dev->gadget); dev->sys_suspended = 0; } - dev->driver->disconnect(&dev->gadget); + usb_gadget_udc_reset(&dev->gadget, dev->driver); spin_lock(&dev->lock); /* disable ep0 to empty req queue */ diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index 9968f53..eb2999c 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -840,6 +840,31 @@ static void udc_reinit(struct at91_udc *udc) } } +static void reset_gadget(struct at91_udc *udc) +{ + struct usb_gadget_driver *driver = udc->driver; + int i; + + if (udc->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; + + for (i = 0; i < NUM_ENDPOINTS; i++) { + struct at91_ep *ep = &udc->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + if (driver) { + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, driver); + spin_lock(&udc->lock); + } + + udc_reinit(udc); +} + static void stop_activity(struct at91_udc *udc) { struct usb_gadget_driver *driver = udc->driver; @@ -870,12 +895,10 @@ static void clk_on(struct at91_udc *udc) return; udc->clocked = 1; - if (IS_ENABLED(CONFIG_COMMON_CLK)) { - clk_set_rate(udc->uclk, 48000000); - clk_prepare_enable(udc->uclk); - } - clk_prepare_enable(udc->iclk); - clk_prepare_enable(udc->fclk); + if (IS_ENABLED(CONFIG_COMMON_CLK)) + clk_enable(udc->uclk); + clk_enable(udc->iclk); + clk_enable(udc->fclk); } static void clk_off(struct at91_udc *udc) @@ -884,10 +907,10 @@ static void clk_off(struct at91_udc *udc) return; udc->clocked = 0; udc->gadget.speed = USB_SPEED_UNKNOWN; - clk_disable_unprepare(udc->fclk); - clk_disable_unprepare(udc->iclk); + clk_disable(udc->fclk); + clk_disable(udc->iclk); if (IS_ENABLED(CONFIG_COMMON_CLK)) - clk_disable_unprepare(udc->uclk); + clk_disable(udc->uclk); } /* @@ -984,8 +1007,8 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on) static int at91_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); -static int at91_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver); +static int at91_stop(struct usb_gadget *gadget); + static const struct usb_gadget_ops at91_udc_ops = { .get_frame = at91_get_frame, .wakeup = at91_wakeup, @@ -1426,7 +1449,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES); VDBG("end bus reset\n"); udc->addr = 0; - stop_activity(udc); + reset_gadget(udc); /* enable ep0 */ at91_udp_write(udc, AT91_UDP_CSR(0), @@ -1512,20 +1535,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) /*-------------------------------------------------------------------------*/ -static void nop_release(struct device *dev) -{ - /* nothing to free */ -} - static struct at91_udc controller = { .gadget = { .ops = &at91_udc_ops, .ep0 = &controller.ep[0].ep, .name = driver_name, - .dev = { - .init_name = "gadget", - .release = nop_release, - } }, .ep[0] = { .ep = { @@ -1641,12 +1655,10 @@ static int at91_start(struct usb_gadget *gadget, udc->enabled = 1; udc->selfpowered = 1; - DBG("bound to %s\n", driver->driver.name); return 0; } -static int at91_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int at91_stop(struct usb_gadget *gadget) { struct at91_udc *udc; unsigned long flags; @@ -1659,7 +1671,6 @@ static int at91_stop(struct usb_gadget *gadget, udc->driver = NULL; - DBG("unbound from %s\n", driver->driver.name); return 0; } @@ -1780,14 +1791,24 @@ static int at91udc_probe(struct platform_device *pdev) } /* don't do anything until we have both gadget driver and VBUS */ + if (IS_ENABLED(CONFIG_COMMON_CLK)) { + clk_set_rate(udc->uclk, 48000000); + retval = clk_prepare(udc->uclk); + if (retval) + goto fail1; + } + retval = clk_prepare(udc->fclk); + if (retval) + goto fail1a; + retval = clk_prepare_enable(udc->iclk); if (retval) - goto fail1; + goto fail1b; at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff); /* Clear all pending interrupts - UDP may be used by bootloader. */ at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff); - clk_disable_unprepare(udc->iclk); + clk_disable(udc->iclk); /* request UDC and maybe VBUS irqs */ udc->udp_irq = platform_get_irq(pdev, 0); @@ -1795,7 +1816,7 @@ static int at91udc_probe(struct platform_device *pdev) 0, driver_name, udc); if (retval < 0) { DBG("request irq %d failed\n", udc->udp_irq); - goto fail1; + goto fail1c; } if (gpio_is_valid(udc->board.vbus_pin)) { retval = gpio_request(udc->board.vbus_pin, "udc_vbus"); @@ -1848,6 +1869,13 @@ fail3: gpio_free(udc->board.vbus_pin); fail2: free_irq(udc->udp_irq, udc); +fail1c: + clk_unprepare(udc->iclk); +fail1b: + clk_unprepare(udc->fclk); +fail1a: + if (IS_ENABLED(CONFIG_COMMON_CLK)) + clk_unprepare(udc->uclk); fail1: if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk)) clk_put(udc->uclk); @@ -1896,6 +1924,11 @@ static int __exit at91udc_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, resource_size(res)); + if (IS_ENABLED(CONFIG_COMMON_CLK)) + clk_unprepare(udc->uclk); + clk_unprepare(udc->fclk); + clk_unprepare(udc->iclk); + clk_put(udc->iclk); clk_put(udc->fclk); if (IS_ENABLED(CONFIG_COMMON_CLK)) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 1529926..b317479 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -987,8 +987,8 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) static int atmel_usba_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); -static int atmel_usba_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver); +static int atmel_usba_stop(struct usb_gadget *gadget); + static const struct usb_gadget_ops usba_udc_ops = { .get_frame = usba_udc_get_frame, .wakeup = usba_udc_wakeup, @@ -1007,19 +1007,10 @@ static struct usb_endpoint_descriptor usba_ep0_desc = { .bInterval = 1, }; -static void nop_release(struct device *dev) -{ - -} - static struct usb_gadget usba_gadget_template = { .ops = &usba_udc_ops, .max_speed = USB_SPEED_HIGH, .name = "atmel_usba_udc", - .dev = { - .init_name = "gadget", - .release = nop_release, - }, }; /* @@ -1685,11 +1676,10 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) usba_writel(udc, INT_CLR, USBA_END_OF_RESET); reset_all_endpoints(udc); - if (udc->gadget.speed != USB_SPEED_UNKNOWN - && udc->driver && udc->driver->disconnect) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN && udc->driver) { udc->gadget.speed = USB_SPEED_UNKNOWN; spin_unlock(&udc->lock); - udc->driver->disconnect(&udc->gadget); + usb_gadget_udc_reset(&udc->gadget, udc->driver); spin_lock(&udc->lock); } @@ -1791,8 +1781,6 @@ static int atmel_usba_start(struct usb_gadget *gadget, return ret; } - DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name); - udc->vbus_prev = 0; if (gpio_is_valid(udc->vbus_pin)) enable_irq(gpio_to_irq(udc->vbus_pin)); @@ -1809,8 +1797,7 @@ static int atmel_usba_start(struct usb_gadget *gadget, return 0; } -static int atmel_usba_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int atmel_usba_stop(struct usb_gadget *gadget) { struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget); unsigned long flags; @@ -1830,8 +1817,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget, clk_disable_unprepare(udc->hclk); clk_disable_unprepare(udc->pclk); - DBG(DBG_GADGET, "unregistered driver `%s'\n", udc->driver->driver.name); - udc->driver = NULL; return 0; diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c index 2235b88..c790918 100644 --- a/drivers/usb/gadget/udc/bcm63xx_udc.c +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -1836,8 +1836,7 @@ static int bcm63xx_udc_start(struct usb_gadget *gadget, * @gadget: USB slave device. * @driver: Driver for USB slave devices. */ -static int bcm63xx_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int bcm63xx_udc_stop(struct usb_gadget *gadget) { struct bcm63xx_udc *udc = gadget_to_udc(gadget); unsigned long flags; @@ -1963,7 +1962,7 @@ static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) { struct bcm63xx_udc *udc = dev_id; u32 stat; - bool disconnected = false; + bool disconnected = false, bus_reset = false; stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) & usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG); @@ -1991,7 +1990,7 @@ static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) udc->ep0_req_reset = 1; schedule_work(&udc->ep0_wq); - disconnected = true; + bus_reset = true; } if (stat & BIT(USBD_EVENT_IRQ_SETUP)) { if (bcm63xx_update_link_speed(udc)) { @@ -2014,6 +2013,8 @@ static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id) if (disconnected && udc->driver) udc->driver->disconnect(&udc->gadget); + else if (bus_reset && udc->driver) + usb_gadget_udc_reset(&udc->gadget, udc->driver); return IRQ_HANDLED; } @@ -2324,10 +2325,8 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) int rc = -ENOMEM, i, irq; udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); - if (!udc) { - dev_err(dev, "cannot allocate memory\n"); + if (!udc) return -ENOMEM; - } platform_set_drvdata(pdev, udc); udc->dev = dev; diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig new file mode 100644 index 0000000..0d7b8c9 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/Kconfig @@ -0,0 +1,21 @@ +config USB_BDC_UDC + tristate "Broadcom USB3.0 device controller IP driver(BDC)" + depends on USB_GADGET && HAS_DMA + + help + BDC is Broadcom's USB3.0 device controller IP. If your SOC has a BDC IP + then select this driver. + + Say "y" here to link the driver statically, or "m" to build a dynamically + linked module called "bdc". + +if USB_BDC_UDC + +comment "Platform Support" +config USB_BDC_PCI + tristate "BDC support for PCIe based platforms" + depends on PCI + default USB_BDC_UDC + help + Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform. +endif diff --git a/drivers/usb/gadget/udc/bdc/Makefile b/drivers/usb/gadget/udc/bdc/Makefile new file mode 100644 index 0000000..5cf6a3b --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_USB_BDC_UDC) += bdc.o +bdc-y := bdc_core.o bdc_cmd.o bdc_ep.o bdc_udc.o + +ifneq ($(CONFIG_USB_GADGET_VERBOSE),) + bdc-y += bdc_dbg.o +endif + +obj-$(CONFIG_USB_BDC_PCI) += bdc_pci.o diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h new file mode 100644 index 0000000..dc18a20 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc.h @@ -0,0 +1,490 @@ +/* + * bdc.h - header for the BRCM BDC USB3.0 device controller + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_BDC_H__ +#define __LINUX_BDC_H__ + +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/debugfs.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <asm/unaligned.h> + +#define BRCM_BDC_NAME "bdc_usb3" +#define BRCM_BDC_DESC "BDC device controller driver" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +/* BDC command operation timeout in usec*/ +#define BDC_CMD_TIMEOUT 1000 +/* BDC controller operation timeout in usec*/ +#define BDC_COP_TIMEOUT 500 + +/* + * Maximum size of ep0 response buffer for ch9 requests, + * the set_sel request uses 6 so far, the max. +*/ +#define EP0_RESPONSE_BUFF 6 +/* Start with SS as default */ +#define EP0_MAX_PKT_SIZE 512 + +/* 64 entries in a SRR */ +#define NUM_SR_ENTRIES 64 + +/* Num of bds per table */ +#define NUM_BDS_PER_TABLE 32 + +/* Num of tables in bd list for control,bulk and Int ep */ +#define NUM_TABLES 2 + +/* Num of tables in bd list for Isoch ep */ +#define NUM_TABLES_ISOCH 6 + +/* U1 Timeout default: 248usec */ +#define U1_TIMEOUT 0xf8 + +/* Interrupt coalescence in usec */ +#define INT_CLS 500 + +/* Register offsets */ +/* Configuration and Capability registers */ +#define BDC_BDCCFG0 0x00 +#define BDC_BDCCFG1 0x04 +#define BDC_BDCCAP0 0x08 +#define BDC_BDCCAP1 0x0c +#define BDC_CMDPAR0 0x10 +#define BDC_CMDPAR1 0x14 +#define BDC_CMDPAR2 0x18 +#define BDC_CMDSC 0x1c +#define BDC_USPC 0x20 +#define BDC_USPPMS 0x28 +#define BDC_USPPM2 0x2c +#define BDC_SPBBAL 0x38 +#define BDC_SPBBAH 0x3c +#define BDC_BDCSC 0x40 +#define BDC_XSFNTF 0x4c + +#define BDC_DVCSA 0x50 +#define BDC_DVCSB 0x54 +#define BDC_EPSTS0(n) (0x60 + (n * 0x10)) +#define BDC_EPSTS1(n) (0x64 + (n * 0x10)) +#define BDC_EPSTS2(n) (0x68 + (n * 0x10)) +#define BDC_EPSTS3(n) (0x6c + (n * 0x10)) +#define BDC_EPSTS4(n) (0x70 + (n * 0x10)) +#define BDC_EPSTS5(n) (0x74 + (n * 0x10)) +#define BDC_EPSTS6(n) (0x78 + (n * 0x10)) +#define BDC_EPSTS7(n) (0x7c + (n * 0x10)) +#define BDC_SRRBAL(n) (0x200 + (n * 0x10)) +#define BDC_SRRBAH(n) (0x204 + (n * 0x10)) +#define BDC_SRRINT(n) (0x208 + (n * 0x10)) +#define BDC_INTCTLS(n) (0x20c + (n * 0x10)) + +/* Extended capability regs */ +#define BDC_FSCNOC 0xcd4 +#define BDC_FSCNIC 0xce4 +#define NUM_NCS(p) (p >> 28) + +/* Register bit fields and Masks */ +/* BDC Configuration 0 */ +#define BDC_PGS(p) (((p) & (0x7 << 8)) >> 8) +#define BDC_SPB(p) (p & 0x7) + +/* BDC Capability1 */ +#define BDC_P64 (1 << 0) + +/* BDC Command register */ +#define BDC_CMD_FH 0xe +#define BDC_CMD_DNC 0x6 +#define BDC_CMD_EPO 0x4 +#define BDC_CMD_BLA 0x3 +#define BDC_CMD_EPC 0x2 +#define BDC_CMD_DVC 0x1 +#define BDC_CMD_CWS (0x1 << 5) +#define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6) +#define BDC_CMD_EPN(p) ((p & 0x1f) << 10) +#define BDC_SUB_CMD_ADD (0x1 << 17) +#define BDC_SUB_CMD_FWK (0x4 << 17) +/* Reset sequence number */ +#define BDC_CMD_EPO_RST_SN (0x1 << 16) +#define BDC_CMD_EP0_XSD (0x1 << 16) +#define BDC_SUB_CMD_ADD_EP (0x1 << 17) +#define BDC_SUB_CMD_DRP_EP (0x2 << 17) +#define BDC_SUB_CMD_EP_STP (0x2 << 17) +#define BDC_SUB_CMD_EP_STL (0x4 << 17) +#define BDC_SUB_CMD_EP_RST (0x1 << 17) +#define BDC_CMD_SRD (1 << 27) + +/* CMD completion status */ +#define BDC_CMDS_SUCC 0x1 +#define BDC_CMDS_PARA 0x3 +#define BDC_CMDS_STAT 0x4 +#define BDC_CMDS_FAIL 0x5 +#define BDC_CMDS_INTL 0x6 +#define BDC_CMDS_BUSY 0xf + +/* CMDSC Param 2 shifts */ +#define EPT_SHIFT 22 +#define MP_SHIFT 10 +#define MB_SHIFT 6 +#define EPM_SHIFT 4 + +/* BDC USPSC */ +#define BDC_VBC (1 << 31) +#define BDC_PRC (1 << 30) +#define BDC_PCE (1 << 29) +#define BDC_CFC (1 << 28) +#define BDC_PCC (1 << 27) +#define BDC_PSC (1 << 26) +#define BDC_VBS (1 << 25) +#define BDC_PRS (1 << 24) +#define BDC_PCS (1 << 23) +#define BDC_PSP(p) (((p) & (0x7 << 20))>>20) +#define BDC_SCN (1 << 8) +#define BDC_SDC (1 << 7) +#define BDC_SWS (1 << 4) + +#define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf) +#define BDC_PSP(p) (((p) & (0x7 << 20))>>20) + +#define BDC_SPEED_FS 0x1 +#define BDC_SPEED_LS 0x2 +#define BDC_SPEED_HS 0x3 +#define BDC_SPEED_SS 0x4 + +#define BDC_PST(p) (p & 0xf) +#define BDC_PST_MASK 0xf + +/* USPPMS */ +#define BDC_U2E (0x1 << 31) +#define BDC_U1E (0x1 << 30) +#define BDC_U2A (0x1 << 29) +#define BDC_PORT_W1S (0x1 << 17) +#define BDC_U1T(p) ((p) & 0xff) +#define BDC_U2T(p) (((p) & 0xff) << 8) +#define BDC_U1T_MASK 0xff + +/* USBPM2 */ +/* Hardware LPM Enable */ +#define BDC_HLE (1 << 16) + +/* BDC Status and Control */ +#define BDC_COP_RST (1 << 29) +#define BDC_COP_RUN (2 << 29) +#define BDC_COP_STP (4 << 29) + +#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP) + +#define BDC_COS (1 << 28) +#define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20) +#define BDC_MASK_MCW (1 << 7) +#define BDC_GIE (1 << 1) +#define BDC_GIP (1 << 0) + +#define BDC_HLT 1 +#define BDC_NOR 2 +#define BDC_OIP 7 + +/* Buffer descriptor and Status report bit fields and masks */ +#define BD_TYPE_BITMASK (0xf) +#define BD_CHAIN 0xf + +#define BD_TFS_SHIFT 4 +#define BD_SOT (1 << 26) +#define BD_EOT (1 << 27) +#define BD_ISP (1 << 29) +#define BD_IOC (1 << 30) +#define BD_SBF (1 << 31) + +#define BD_INTR_TARGET(p) (((p) & 0x1f) << 27) + +#define BDC_SRR_RWS (1 << 4) +#define BDC_SRR_RST (1 << 3) +#define BDC_SRR_ISR (1 << 2) +#define BDC_SRR_IE (1 << 1) +#define BDC_SRR_IP (1 << 0) +#define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24) +#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16) +#define BDC_SRR_DPI_MASK 0x00ff0000 + +#define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT) + +/* Control transfer BD specific fields */ +#define BD_DIR_IN (1 << 25) + +#define BDC_PTC_MASK 0xf0000000 + +/* status report defines */ +#define SR_XSF 0 +#define SR_USPC 4 +#define SR_BD_LEN(p) (p & 0xffffff) + +#define XSF_SUCC 0x1 +#define XSF_SHORT 0x3 +#define XSF_BABB 0x4 +#define XSF_SETUP_RECV 0x6 +#define XSF_DATA_START 0x7 +#define XSF_STATUS_START 0x8 + +#define XSF_STS(p) (((p) >> 28) & 0xf) + +/* Transfer BD fields */ +#define BD_LEN(p) ((p) & 0x1ffff) +#define BD_LTF (1 << 25) +#define BD_TYPE_DS 0x1 +#define BD_TYPE_SS 0x2 + +#define BDC_EP_ENABLED (1 << 0) +#define BDC_EP_STALL (1 << 1) +#define BDC_EP_STOP (1 << 2) + +/* One BD can transfer max 65536 bytes */ +#define BD_MAX_BUFF_SIZE (1 << 16) +/* Maximum bytes in one XFR, Refer to BDC spec */ +#define MAX_XFR_LEN 16777215 + +/* defines for Force Header command */ +#define DEV_NOTF_TYPE 6 +#define FWK_SUBTYPE 1 +#define TRA_PACKET 4 + +#define to_bdc_ep(e) container_of(e, struct bdc_ep, usb_ep) +#define to_bdc_req(r) container_of(r, struct bdc_req, usb_req) +#define gadget_to_bdc(g) container_of(g, struct bdc, gadget) + +/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */ +#define BDC_TNOTIFY 2500 /*in ms*/ +/* Devstatus bitfields */ +#define REMOTE_WAKEUP_ISSUED (1 << 16) +#define DEVICE_SUSPENDED (1 << 17) +#define FUNC_WAKE_ISSUED (1 << 18) +#define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP) + +/* On disconnect, preserve these bits and clear rest */ +#define DEVSTATUS_CLEAR (1 << USB_DEVICE_SELF_POWERED) +/* Hardware and software Data structures */ + +/* Endpoint bd: buffer descriptor */ +struct bdc_bd { + __le32 offset[4]; +}; + +/* Status report in Status report ring(srr) */ +struct bdc_sr { + __le32 offset[4]; +}; + +/* bd_table: contigous bd's in a table */ +struct bd_table { + struct bdc_bd *start_bd; + /* dma address of start bd of table*/ + dma_addr_t dma; +}; + +/* + * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd + * table's chained to each other through a chain bd, every table has equal + * number of bds. the software uses bdi(bd index) to refer to particular bd in + * the list. + */ +struct bd_list { + /* Array of bd table pointers*/ + struct bd_table **bd_table_array; + /* How many tables chained to each other */ + int num_tabs; + /* Max_bdi = num_tabs * num_bds_table - 1 */ + int max_bdi; + /* current enq bdi from sw point of view */ + int eqp_bdi; + /* current deq bdi from sw point of view */ + int hwd_bdi; + /* numbers of bds per table */ + int num_bds_table; +}; + +struct bdc_req; + +/* Representation of a transfer, one transfer can have multiple bd's */ +struct bd_transfer { + struct bdc_req *req; + /* start bd index */ + int start_bdi; + /* this will be the next hw dqp when this transfer completes */ + int next_hwd_bdi; + /* number of bds in this transfer */ + int num_bds; +}; + +/* + * Representation of a gadget request, every gadget request is contained + * by 1 bd_transfer. + */ +struct bdc_req { + struct usb_request usb_req; + struct list_head queue; + struct bdc_ep *ep; + /* only one Transfer per request */ + struct bd_transfer bd_xfr; + int epnum; +}; + +/* scratchpad buffer needed by bdc hardware */ +struct bdc_scratchpad { + dma_addr_t sp_dma; + void *buff; + u32 size; +}; + +/* endpoint representation */ +struct bdc_ep { + struct usb_ep usb_ep; + struct list_head queue; + struct bdc *bdc; + u8 ep_type; + u8 dir; + u8 ep_num; + const struct usb_ss_ep_comp_descriptor *comp_desc; + const struct usb_endpoint_descriptor *desc; + unsigned int flags; + char name[20]; + /* endpoint bd list*/ + struct bd_list bd_list; + /* + * HW generates extra event for multi bd tranfers, this flag helps in + * ignoring the extra event + */ + bool ignore_next_sr; +}; + +/* bdc cmmand parameter structure */ +struct bdc_cmd_params { + u32 param2; + u32 param1; + u32 param0; +}; + +/* status report ring(srr), currently one srr is supported for entire system */ +struct srr { + struct bdc_sr *sr_bds; + u16 eqp_index; + u16 dqp_index; + dma_addr_t dma_addr; +}; + +/* EP0 states */ +enum bdc_ep0_state { + WAIT_FOR_SETUP = 0, + WAIT_FOR_DATA_START, + WAIT_FOR_DATA_XMIT, + WAIT_FOR_STATUS_START, + WAIT_FOR_STATUS_XMIT, + STATUS_PENDING +}; + +/* Link states */ +enum bdc_link_state { + BDC_LINK_STATE_U0 = 0x00, + BDC_LINK_STATE_U3 = 0x03, + BDC_LINK_STATE_RX_DET = 0x05, + BDC_LINK_STATE_RESUME = 0x0f +}; + +/* representation of bdc */ +struct bdc { + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + struct device *dev; + /* device lock */ + spinlock_t lock; + + /* num of endpoints for a particular instantiation of IP */ + unsigned int num_eps; + /* + * Array of ep's, it uses the same index covention as bdc hw i.e. + * 1 for ep0, 2 for 1out,3 for 1in .... + */ + struct bdc_ep **bdc_ep_array; + void __iomem *regs; + struct bdc_scratchpad scratchpad; + u32 sp_buff_size; + /* current driver supports 1 status ring */ + struct srr srr; + /* Last received setup packet */ + struct usb_ctrlrequest setup_pkt; + struct bdc_req ep0_req; + struct bdc_req status_req; + enum bdc_ep0_state ep0_state; + bool delayed_status; + bool zlp_needed; + bool reinit; + bool pullup; + /* Bits 0-15 are standard and 16-31 for proprietary information */ + u32 devstatus; + int irq; + void *mem; + u32 dev_addr; + /* DMA pools */ + struct dma_pool *bd_table_pool; + u8 test_mode; + /* array of callbacks for various status report handlers */ + void (*sr_handler[2])(struct bdc *, struct bdc_sr *); + /* ep0 callback handlers */ + void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *); + /* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */ + unsigned char ep0_response_buff[EP0_RESPONSE_BUFF]; + /* + * Timer to check if host resumed transfer after bdc sent Func wake + * notification packet after a remote wakeup. if not, then resend the + * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4 + */ + struct delayed_work func_wake_notify; +}; + +static inline u32 bdc_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void bdc_writel(void __iomem *base, u32 offset, u32 value) +{ + writel(value, base + offset); +} + +/* Buffer descriptor list operations */ +void bdc_notify_xfr(struct bdc *, u32); +void bdc_softconn(struct bdc *); +void bdc_softdisconn(struct bdc *); +int bdc_run(struct bdc *); +int bdc_stop(struct bdc *); +int bdc_reset(struct bdc *); +int bdc_udc_init(struct bdc *); +void bdc_udc_exit(struct bdc *); +int bdc_reinit(struct bdc *); + +/* Status report handlers */ +/* Upstream port status change sr */ +void bdc_sr_uspc(struct bdc *, struct bdc_sr *); +/* transfer sr */ +void bdc_sr_xsf(struct bdc *, struct bdc_sr *); +/* EP0 XSF handlers */ +void bdc_xsf_ep0_setup_recv(struct bdc *, struct bdc_sr *); +void bdc_xsf_ep0_data_start(struct bdc *, struct bdc_sr *); +void bdc_xsf_ep0_status_start(struct bdc *, struct bdc_sr *); + +#endif /* __LINUX_BDC_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c new file mode 100644 index 0000000..6a4155c --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c @@ -0,0 +1,376 @@ +/* + * bdc_cmd.c - BRCM BDC USB3.0 device controller + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/scatterlist.h> +#include <linux/slab.h> + +#include "bdc.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +/* Issues a cmd to cmd processor and waits for cmd completion */ +static int bdc_issue_cmd(struct bdc *bdc, u32 cmd_sc, u32 param0, + u32 param1, u32 param2) +{ + u32 timeout = BDC_CMD_TIMEOUT; + u32 cmd_status; + u32 temp; + + bdc_writel(bdc->regs, BDC_CMDPAR0, param0); + bdc_writel(bdc->regs, BDC_CMDPAR1, param1); + bdc_writel(bdc->regs, BDC_CMDPAR2, param2); + + /* Issue the cmd */ + /* Make sure the cmd params are written before asking HW to exec cmd */ + wmb(); + bdc_writel(bdc->regs, BDC_CMDSC, cmd_sc | BDC_CMD_CWS | BDC_CMD_SRD); + do { + temp = bdc_readl(bdc->regs, BDC_CMDSC); + dev_dbg_ratelimited(bdc->dev, "cmdsc=%x", temp); + cmd_status = BDC_CMD_CST(temp); + if (cmd_status != BDC_CMDS_BUSY) { + dev_dbg(bdc->dev, + "command completed cmd_sts:%x\n", cmd_status); + return cmd_status; + } + udelay(1); + } while (timeout--); + + dev_err(bdc->dev, + "command operation timedout cmd_status=%d\n", cmd_status); + + return cmd_status; +} + +/* Submits cmd and analyze the return value of bdc_issue_cmd */ +static int bdc_submit_cmd(struct bdc *bdc, u32 cmd_sc, + u32 param0, u32 param1, u32 param2) +{ + u32 temp, cmd_status; + int reset_bdc = 0; + int ret; + + temp = bdc_readl(bdc->regs, BDC_CMDSC); + dev_dbg(bdc->dev, + "%s:CMDSC:%08x cmdsc:%08x param0=%08x param1=%08x param2=%08x\n", + __func__, temp, cmd_sc, param0, param1, param2); + + cmd_status = BDC_CMD_CST(temp); + if (cmd_status == BDC_CMDS_BUSY) { + dev_err(bdc->dev, "command processor busy: %x\n", cmd_status); + return -EBUSY; + } + ret = bdc_issue_cmd(bdc, cmd_sc, param0, param1, param2); + switch (ret) { + case BDC_CMDS_SUCC: + dev_dbg(bdc->dev, "command completed successfully\n"); + ret = 0; + break; + + case BDC_CMDS_PARA: + dev_err(bdc->dev, "command parameter error\n"); + ret = -EINVAL; + break; + + case BDC_CMDS_STAT: + dev_err(bdc->dev, "Invalid device/ep state\n"); + ret = -EINVAL; + break; + + case BDC_CMDS_FAIL: + dev_err(bdc->dev, "Command failed?\n"); + ret = -EAGAIN; + break; + + case BDC_CMDS_INTL: + dev_err(bdc->dev, "BDC Internal error\n"); + reset_bdc = 1; + ret = -ECONNRESET; + break; + + case BDC_CMDS_BUSY: + dev_err(bdc->dev, + "command timedout waited for %dusec\n", + BDC_CMD_TIMEOUT); + reset_bdc = 1; + ret = -ECONNRESET; + break; + default: + dev_dbg(bdc->dev, "Unknown command completion code:%x\n", ret); + } + + return ret; +} + +/* Deconfigure the endpoint from HW */ +int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep) +{ + u32 cmd_sc; + + cmd_sc = BDC_SUB_CMD_DRP_EP|BDC_CMD_EPN(ep->ep_num)|BDC_CMD_EPC; + dev_dbg(bdc->dev, "%s ep->ep_num =%d cmd_sc=%x\n", __func__, + ep->ep_num, cmd_sc); + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); +} + +/* Reinitalize the bdlist after config ep command */ +static void ep_bd_list_reinit(struct bdc_ep *ep) +{ + struct bdc *bdc = ep->bdc; + struct bdc_bd *bd; + + ep->bd_list.eqp_bdi = 0; + ep->bd_list.hwd_bdi = 0; + bd = ep->bd_list.bd_table_array[0]->start_bd; + dev_dbg(bdc->dev, "%s ep:%p bd:%p\n", __func__, ep, bd); + memset(bd, 0, sizeof(struct bdc_bd)); + bd->offset[3] |= cpu_to_le32(BD_SBF); +} + +/* Configure an endpoint */ +int bdc_config_ep(struct bdc *bdc, struct bdc_ep *ep) +{ + const struct usb_ss_ep_comp_descriptor *comp_desc; + const struct usb_endpoint_descriptor *desc; + u32 param0, param1, param2, cmd_sc; + u32 mps, mbs, mul, si; + int ret; + + desc = ep->desc; + comp_desc = ep->comp_desc; + cmd_sc = mul = mbs = param2 = 0; + param0 = lower_32_bits(ep->bd_list.bd_table_array[0]->dma); + param1 = upper_32_bits(ep->bd_list.bd_table_array[0]->dma); + cpu_to_le32s(¶m0); + cpu_to_le32s(¶m1); + + dev_dbg(bdc->dev, "%s: param0=%08x param1=%08x", + __func__, param0, param1); + si = desc->bInterval; + si = clamp_val(si, 1, 16) - 1; + + mps = usb_endpoint_maxp(desc); + mps &= 0x7ff; + param2 |= mps << MP_SHIFT; + param2 |= usb_endpoint_type(desc) << EPT_SHIFT; + + switch (bdc->gadget.speed) { + case USB_SPEED_SUPER: + if (usb_endpoint_xfer_int(desc) || + usb_endpoint_xfer_isoc(desc)) { + param2 |= si; + if (usb_endpoint_xfer_isoc(desc) && comp_desc) + mul = comp_desc->bmAttributes; + + } + param2 |= mul << EPM_SHIFT; + if (comp_desc) + mbs = comp_desc->bMaxBurst; + param2 |= mbs << MB_SHIFT; + break; + + case USB_SPEED_HIGH: + if (usb_endpoint_xfer_isoc(desc) || + usb_endpoint_xfer_int(desc)) { + param2 |= si; + + mbs = (usb_endpoint_maxp(desc) & 0x1800) >> 11; + param2 |= mbs << MB_SHIFT; + } + break; + + case USB_SPEED_FULL: + case USB_SPEED_LOW: + /* the hardware accepts SI in 125usec range */ + if (usb_endpoint_xfer_isoc(desc)) + si += 3; + + /* + * FS Int endpoints can have si of 1-255ms but the controller + * accepts 2^bInterval*125usec, so convert ms to nearest power + * of 2 + */ + if (usb_endpoint_xfer_int(desc)) + si = fls(desc->bInterval * 8) - 1; + + param2 |= si; + break; + default: + dev_err(bdc->dev, "UNKNOWN speed ERR\n"); + return -EINVAL; + } + + cmd_sc |= BDC_CMD_EPC|BDC_CMD_EPN(ep->ep_num)|BDC_SUB_CMD_ADD_EP; + + dev_dbg(bdc->dev, "cmd_sc=%x param2=%08x\n", cmd_sc, param2); + ret = bdc_submit_cmd(bdc, cmd_sc, param0, param1, param2); + if (ret) { + dev_err(bdc->dev, "command failed :%x\n", ret); + return ret; + } + ep_bd_list_reinit(ep); + + return ret; +} + +/* + * Change the HW deq pointer, if this command is successful, HW will start + * fetching the next bd from address dma_addr. + */ +int bdc_ep_bla(struct bdc *bdc, struct bdc_ep *ep, dma_addr_t dma_addr) +{ + u32 param0, param1; + u32 cmd_sc = 0; + + dev_dbg(bdc->dev, "%s: add=%08llx\n", __func__, + (unsigned long long)(dma_addr)); + param0 = lower_32_bits(dma_addr); + param1 = upper_32_bits(dma_addr); + cpu_to_le32s(¶m0); + cpu_to_le32s(¶m1); + + cmd_sc |= BDC_CMD_EPN(ep->ep_num)|BDC_CMD_BLA; + dev_dbg(bdc->dev, "cmd_sc=%x\n", cmd_sc); + + return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0); +} + +/* Set the address sent bu Host in SET_ADD request */ +int bdc_address_device(struct bdc *bdc, u32 add) +{ + u32 cmd_sc = 0; + u32 param2; + + dev_dbg(bdc->dev, "%s: add=%d\n", __func__, add); + cmd_sc |= BDC_SUB_CMD_ADD|BDC_CMD_DVC; + param2 = add & 0x7f; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2); +} + +/* Send a Function Wake notification packet using FH command */ +int bdc_function_wake_fh(struct bdc *bdc, u8 intf) +{ + u32 param0, param1; + u32 cmd_sc = 0; + + param0 = param1 = 0; + dev_dbg(bdc->dev, "%s intf=%d\n", __func__, intf); + cmd_sc |= BDC_CMD_FH; + param0 |= TRA_PACKET; + param0 |= (bdc->dev_addr << 25); + param1 |= DEV_NOTF_TYPE; + param1 |= (FWK_SUBTYPE<<4); + dev_dbg(bdc->dev, "param0=%08x param1=%08x\n", param0, param1); + + return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0); +} + +/* Send a Function Wake notification packet using DNC command */ +int bdc_function_wake(struct bdc *bdc, u8 intf) +{ + u32 cmd_sc = 0; + u32 param2 = 0; + + dev_dbg(bdc->dev, "%s intf=%d", __func__, intf); + param2 |= intf; + cmd_sc |= BDC_SUB_CMD_FWK|BDC_CMD_DNC; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2); +} + +/* Stall the endpoint */ +int bdc_ep_set_stall(struct bdc *bdc, int epnum) +{ + u32 cmd_sc = 0; + + dev_dbg(bdc->dev, "%s epnum=%d\n", __func__, epnum); + /* issue a stall endpoint command */ + cmd_sc |= BDC_SUB_CMD_EP_STL | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); +} + +/* resets the endpoint, called when host sends CLEAR_FEATURE(HALT) */ +int bdc_ep_clear_stall(struct bdc *bdc, int epnum) +{ + struct bdc_ep *ep; + u32 cmd_sc = 0; + int ret; + + dev_dbg(bdc->dev, "%s: epnum=%d\n", __func__, epnum); + ep = bdc->bdc_ep_array[epnum]; + /* + * If we are not in stalled then stall Endpoint and issue clear stall, + * his will reset the seq number for non EP0. + */ + if (epnum != 1) { + /* if the endpoint it not stallled */ + if (!(ep->flags & BDC_EP_STALL)) { + ret = bdc_ep_set_stall(bdc, epnum); + if (ret) + return ret; + } + } + /* Preserve the seq number for ep0 only */ + if (epnum != 1) + cmd_sc |= BDC_CMD_EPO_RST_SN; + + /* issue a reset endpoint command */ + cmd_sc |= BDC_SUB_CMD_EP_RST | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); + if (ret) { + dev_err(bdc->dev, "command failed:%x\n", ret); + return ret; + } + bdc_notify_xfr(bdc, epnum); + + return ret; +} + +/* Stop the endpoint, called when software wants to dequeue some request */ +int bdc_stop_ep(struct bdc *bdc, int epnum) +{ + struct bdc_ep *ep; + u32 cmd_sc = 0; + int ret; + + ep = bdc->bdc_ep_array[epnum]; + dev_dbg(bdc->dev, "%s: ep:%s ep->flags:%08x\n", __func__, + ep->name, ep->flags); + /* Endpoint has to be in running state to execute stop ep command */ + if (!(ep->flags & BDC_EP_ENABLED)) { + dev_err(bdc->dev, "stop endpoint called for disabled ep\n"); + return -EINVAL; + } + if ((ep->flags & BDC_EP_STALL) || (ep->flags & BDC_EP_STOP)) + return 0; + + /* issue a stop endpoint command */ + cmd_sc |= BDC_CMD_EP0_XSD | BDC_SUB_CMD_EP_STP + | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); + if (ret) { + dev_err(bdc->dev, + "stop endpoint command didn't complete:%d ep:%s\n", + ret, ep->name); + return ret; + } + ep->flags |= BDC_EP_STOP; + bdc_dump_epsts(bdc); + + return ret; +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.h b/drivers/usb/gadget/udc/bdc/bdc_cmd.h new file mode 100644 index 0000000..61d0e3b --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.h @@ -0,0 +1,29 @@ +/* + * bdc_cmd.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __LINUX_BDC_CMD_H__ +#define __LINUX_BDC_CMD_H__ + +/* Command operations */ +int bdc_address_device(struct bdc *, u32); +int bdc_config_ep(struct bdc *, struct bdc_ep *); +int bdc_dconfig_ep(struct bdc *, struct bdc_ep *); +int bdc_stop_ep(struct bdc *, int); +int bdc_ep_set_stall(struct bdc *, int); +int bdc_ep_clear_stall(struct bdc *, int); +int bdc_ep_set_halt(struct bdc_ep *, u32 , int); +int bdc_ep_bla(struct bdc *, struct bdc_ep *, dma_addr_t); +int bdc_function_wake(struct bdc*, u8); +int bdc_function_wake_fh(struct bdc*, u8); + +#endif /* __LINUX_BDC_CMD_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c new file mode 100644 index 0000000..c6dfef8 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -0,0 +1,533 @@ +/* + * bdc_core.c - BRCM BDC USB3.0 device controller core operations + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/of.h> +#include <linux/moduleparam.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "bdc.h" +#include "bdc_dbg.h" + +/* Poll till controller status is not OIP */ +static int poll_oip(struct bdc *bdc, int usec) +{ + u32 status; + /* Poll till STS!= OIP */ + while (usec) { + status = bdc_readl(bdc->regs, BDC_BDCSC); + if (BDC_CSTS(status) != BDC_OIP) { + dev_dbg(bdc->dev, + "poll_oip complete status=%d", + BDC_CSTS(status)); + return 0; + } + udelay(10); + usec -= 10; + } + dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status); + + return -ETIMEDOUT; +} + +/* Stop the BDC controller */ +int bdc_stop(struct bdc *bdc) +{ + int ret; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* Check if BDC is already halted */ + if (BDC_CSTS(temp) == BDC_HLT) { + dev_vdbg(bdc->dev, "BDC already halted\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_STP; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc stop operation failed"); + + return ret; +} + +/* Issue a reset to BDC controller */ +int bdc_reset(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + /* First halt the controller */ + ret = bdc_stop(bdc); + if (ret) + return ret; + + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_RST; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc reset operation failed"); + + return ret; +} + +/* Run the BDC controller */ +int bdc_run(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* if BDC is already in running state then do not do anything */ + if (BDC_CSTS(temp) == BDC_NOR) { + dev_warn(bdc->dev, "bdc is already in running state\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COP_RUN; + temp |= BDC_COS; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) { + dev_err(bdc->dev, "bdc run operation failed:%d", ret); + return ret; + } + temp = bdc_readl(bdc->regs, BDC_BDCSC); + if (BDC_CSTS(temp) != BDC_NOR) { + dev_err(bdc->dev, "bdc not in normal mode after RUN op :%d\n", + BDC_CSTS(temp)); + return -ESHUTDOWN; + } + + return 0; +} + +/* + * Present the termination to the host, typically called from upstream port + * event with Vbus present =1 + */ +void bdc_softconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc &= ~BDC_PST_MASK; + uspc |= BDC_LINK_STATE_RX_DET; + uspc |= BDC_SWS; + dev_dbg(bdc->dev, "%s () uspc=%08x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Remove the termination */ +void bdc_softdisconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc |= BDC_SDC; + uspc &= ~BDC_SCN; + dev_dbg(bdc->dev, "%s () uspc=%x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */ +static int scratchpad_setup(struct bdc *bdc) +{ + int sp_buff_size; + u32 low32; + u32 upp32; + + sp_buff_size = BDC_SPB(bdc_readl(bdc->regs, BDC_BDCCFG0)); + dev_dbg(bdc->dev, "%s() sp_buff_size=%d\n", __func__, sp_buff_size); + if (!sp_buff_size) { + dev_dbg(bdc->dev, "Scratchpad buffer not needed\n"); + return 0; + } + /* Refer to BDC spec, Table 4 for description of SPB */ + sp_buff_size = 1 << (sp_buff_size + 5); + dev_dbg(bdc->dev, "Allocating %d bytes for scratchpad\n", sp_buff_size); + bdc->scratchpad.buff = dma_zalloc_coherent(bdc->dev, sp_buff_size, + &bdc->scratchpad.sp_dma, GFP_KERNEL); + + if (!bdc->scratchpad.buff) + goto fail; + + bdc->sp_buff_size = sp_buff_size; + bdc->scratchpad.size = sp_buff_size; + low32 = lower_32_bits(bdc->scratchpad.sp_dma); + upp32 = upper_32_bits(bdc->scratchpad.sp_dma); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + bdc_writel(bdc->regs, BDC_SPBBAL, low32); + bdc_writel(bdc->regs, BDC_SPBBAH, upp32); + return 0; + +fail: + bdc->scratchpad.buff = NULL; + + return -ENOMEM; +} + +/* Allocate the status report ring */ +static int setup_srr(struct bdc *bdc, int interrupter) +{ + dev_dbg(bdc->dev, "%s() NUM_SR_ENTRIES:%d\n", __func__, NUM_SR_ENTRIES); + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), BDC_SRR_RWS | BDC_SRR_RST); + bdc->srr.dqp_index = 0; + /* allocate the status report descriptors */ + bdc->srr.sr_bds = dma_zalloc_coherent( + bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + &bdc->srr.dma_addr, + GFP_KERNEL); + if (!bdc->srr.sr_bds) + return -ENOMEM; + + return 0; +} + +/* Initialize the HW regs and internal data structures */ +static void bdc_mem_init(struct bdc *bdc, bool reinit) +{ + u8 size = 0; + u32 usb2_pm; + u32 low32; + u32 upp32; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc->ep0_state = WAIT_FOR_SETUP; + bdc->dev_addr = 0; + bdc->srr.eqp_index = 0; + bdc->srr.dqp_index = 0; + bdc->zlp_needed = false; + bdc->delayed_status = false; + + bdc_writel(bdc->regs, BDC_SPBBAL, bdc->scratchpad.sp_dma); + /* Init the SRR */ + temp = BDC_SRR_RWS | BDC_SRR_RST; + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + dev_dbg(bdc->dev, "bdc->srr.sr_bds =%p\n", bdc->srr.sr_bds); + temp = lower_32_bits(bdc->srr.dma_addr); + size = fls(NUM_SR_ENTRIES) - 2; + temp |= size; + dev_dbg(bdc->dev, "SRRBAL[0]=%08x NUM_SR_ENTRIES:%d size:%d\n", + temp, NUM_SR_ENTRIES, size); + + low32 = lower_32_bits(temp); + upp32 = upper_32_bits(bdc->srr.dma_addr); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + + /* Write the dma addresses into regs*/ + bdc_writel(bdc->regs, BDC_SRRBAL(0), low32); + bdc_writel(bdc->regs, BDC_SRRBAH(0), upp32); + + temp = bdc_readl(bdc->regs, BDC_SRRINT(0)); + temp |= BDC_SRR_IE; + temp &= ~(BDC_SRR_RST | BDC_SRR_RWS); + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + + /* Set the Interrupt Coalescence ~500 usec */ + temp = bdc_readl(bdc->regs, BDC_INTCTLS(0)); + temp &= ~0xffff; + temp |= INT_CLS; + bdc_writel(bdc->regs, BDC_INTCTLS(0), temp); + + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm); + /* Enable hardware LPM Enable */ + usb2_pm |= BDC_HLE; + bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm); + + /* readback for debug */ + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x\n", usb2_pm); + + /* Disable any unwanted SR's on SRR */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* We don't want Microframe counter wrap SR */ + temp |= BDC_MASK_MCW; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + /* + * In some error cases, driver has to reset the entire BDC controller + * in that case reinit is passed as 1 + */ + if (reinit) { + /* Enable interrupts */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp |= BDC_GIE; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + /* Init scratchpad to 0 */ + memset(bdc->scratchpad.buff, 0, bdc->sp_buff_size); + /* Initialize SRR to 0 */ + memset(bdc->srr.sr_bds, 0, + NUM_SR_ENTRIES * sizeof(struct bdc_bd)); + } else { + /* One time initiaization only */ + /* Enable status report function pointers */ + bdc->sr_handler[0] = bdc_sr_xsf; + bdc->sr_handler[1] = bdc_sr_uspc; + + /* EP0 status report function pointers */ + bdc->sr_xsf_ep0[0] = bdc_xsf_ep0_setup_recv; + bdc->sr_xsf_ep0[1] = bdc_xsf_ep0_data_start; + bdc->sr_xsf_ep0[2] = bdc_xsf_ep0_status_start; + } +} + +/* Free the dynamic memory */ +static void bdc_mem_free(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s\n", __func__); + /* Free SRR */ + if (bdc->srr.sr_bds) + dma_free_coherent(bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + bdc->srr.sr_bds, bdc->srr.dma_addr); + + /* Free scratchpad */ + if (bdc->scratchpad.buff) + dma_free_coherent(bdc->dev, bdc->sp_buff_size, + bdc->scratchpad.buff, bdc->scratchpad.sp_dma); + + /* Destroy the dma pools */ + if (bdc->bd_table_pool) + dma_pool_destroy(bdc->bd_table_pool); + + /* Free the bdc_ep array */ + kfree(bdc->bdc_ep_array); + + bdc->srr.sr_bds = NULL; + bdc->scratchpad.buff = NULL; + bdc->bd_table_pool = NULL; + bdc->bdc_ep_array = NULL; +} + +/* + * bdc reinit gives a controller reset and reinitialize the registers, + * called from disconnect/bus reset scenario's, to ensure proper HW cleanup + */ +int bdc_reinit(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s\n", __func__); + ret = bdc_stop(bdc); + if (ret) + goto out; + + ret = bdc_reset(bdc); + if (ret) + goto out; + + /* the reinit flag is 1 */ + bdc_mem_init(bdc, true); + ret = bdc_run(bdc); +out: + bdc->reinit = false; + + return ret; +} + +/* Allocate all the dyanmic memory */ +static int bdc_mem_alloc(struct bdc *bdc) +{ + u32 page_size; + unsigned int num_ieps, num_oeps; + + dev_dbg(bdc->dev, + "%s() NUM_BDS_PER_TABLE:%d\n", __func__, + NUM_BDS_PER_TABLE); + page_size = BDC_PGS(bdc_readl(bdc->regs, BDC_BDCCFG0)); + /* page size is 2^pgs KB */ + page_size = 1 << page_size; + /* KB */ + page_size <<= 10; + dev_dbg(bdc->dev, "page_size=%d\n", page_size); + + /* Create a pool of bd tables */ + bdc->bd_table_pool = + dma_pool_create("BDC BD tables", bdc->dev, NUM_BDS_PER_TABLE * 16, + 16, page_size); + + if (!bdc->bd_table_pool) + goto fail; + + if (scratchpad_setup(bdc)) + goto fail; + + /* read from regs */ + num_ieps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNIC)); + num_oeps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNOC)); + /* +2: 1 for ep0 and the other is rsvd i.e. bdc_ep[0] is rsvd */ + bdc->num_eps = num_ieps + num_oeps + 2; + dev_dbg(bdc->dev, + "ieps:%d eops:%d num_eps:%d\n", + num_ieps, num_oeps, bdc->num_eps); + /* allocate array of ep pointers */ + bdc->bdc_ep_array = kcalloc(bdc->num_eps, sizeof(struct bdc_ep *), + GFP_KERNEL); + if (!bdc->bdc_ep_array) + goto fail; + + dev_dbg(bdc->dev, "Allocating sr report0\n"); + if (setup_srr(bdc, 0)) + goto fail; + + return 0; +fail: + dev_warn(bdc->dev, "Couldn't initialize memory\n"); + bdc_mem_free(bdc); + + return -ENOMEM; +} + +/* opposite to bdc_hw_init */ +static void bdc_hw_exit(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_mem_free(bdc); +} + +/* Initialize the bdc HW and memory */ +static int bdc_hw_init(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + ret = bdc_reset(bdc); + if (ret) { + dev_err(bdc->dev, "err resetting bdc abort bdc init%d\n", ret); + return ret; + } + ret = bdc_mem_alloc(bdc); + if (ret) { + dev_err(bdc->dev, "Mem alloc failed, aborting\n"); + return -ENOMEM; + } + bdc_mem_init(bdc, 0); + bdc_dbg_regs(bdc); + dev_dbg(bdc->dev, "HW Init done\n"); + + return 0; +} + +static int bdc_probe(struct platform_device *pdev) +{ + struct bdc *bdc; + struct resource *res; + int ret = -ENOMEM; + int irq; + u32 temp; + struct device *dev = &pdev->dev; + + dev_dbg(dev, "%s()\n", __func__); + bdc = devm_kzalloc(dev, sizeof(*bdc), GFP_KERNEL); + if (!bdc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bdc->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(bdc->regs)) { + dev_err(dev, "ioremap error\n"); + return -ENOMEM; + } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "platform_get_irq failed:%d\n", irq); + return irq; + } + spin_lock_init(&bdc->lock); + platform_set_drvdata(pdev, bdc); + bdc->irq = irq; + bdc->dev = dev; + dev_dbg(bdc->dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq); + + temp = bdc_readl(bdc->regs, BDC_BDCSC); + if ((temp & BDC_P64) && + !dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { + dev_dbg(bdc->dev, "Using 64-bit address\n"); + } else { + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(bdc->dev, "No suitable DMA config available, abort\n"); + return -ENOTSUPP; + } + dev_dbg(bdc->dev, "Using 32-bit address\n"); + } + ret = bdc_hw_init(bdc); + if (ret) { + dev_err(bdc->dev, "BDC init failure:%d\n", ret); + return ret; + } + ret = bdc_udc_init(bdc); + if (ret) { + dev_err(bdc->dev, "BDC Gadget init failure:%d\n", ret); + goto cleanup; + } + return 0; + +cleanup: + bdc_hw_exit(bdc); + + return ret; +} + +static int bdc_remove(struct platform_device *pdev) +{ + struct bdc *bdc; + + bdc = platform_get_drvdata(pdev); + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_udc_exit(bdc); + bdc_hw_exit(bdc); + + return 0; +} + +static struct platform_driver bdc_driver = { + .driver = { + .name = BRCM_BDC_NAME, + .owner = THIS_MODULE + }, + .probe = bdc_probe, + .remove = bdc_remove, +}; + +module_platform_driver(bdc_driver); +MODULE_AUTHOR("Ashwini Pahuja <ashwini.linux@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(BRCM_BDC_DESC); diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.c b/drivers/usb/gadget/udc/bdc/bdc_dbg.c new file mode 100644 index 0000000..5945dbc --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.c @@ -0,0 +1,123 @@ +/* + * bdc_dbg.c - BRCM BDC USB3.0 device controller debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include "bdc.h" +#include "bdc_dbg.h" + +void bdc_dbg_regs(struct bdc *bdc) +{ + u32 temp; + + dev_vdbg(bdc->dev, "bdc->regs:%p\n", bdc->regs); + temp = bdc_readl(bdc->regs, BDC_BDCCFG0); + dev_vdbg(bdc->dev, "bdccfg0:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCFG1); + dev_vdbg(bdc->dev, "bdccfg1:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCAP0); + dev_vdbg(bdc->dev, "bdccap0:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCAP1); + dev_vdbg(bdc->dev, "bdccap1:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_USPC); + dev_vdbg(bdc->dev, "uspc:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_DVCSA); + dev_vdbg(bdc->dev, "dvcsa:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_DVCSB); + dev_vdbg(bdc->dev, "dvcsb:0x%x08\n", temp); +} + +void bdc_dump_epsts(struct bdc *bdc) +{ + u32 temp; + + temp = bdc_readl(bdc->regs, BDC_EPSTS0(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS0:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS1(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS1:0x%x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS2(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS2:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS3(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS3:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS4(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS4:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS5(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS5:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS6(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS6:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS7(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS7:0x%08x\n", temp); +} + +void bdc_dbg_srr(struct bdc *bdc, u32 srr_num) +{ + struct bdc_sr *sr; + dma_addr_t addr; + int i; + + sr = bdc->srr.sr_bds; + addr = bdc->srr.dma_addr; + dev_vdbg(bdc->dev, "bdc_dbg_srr sr:%p dqp_index:%d\n", + sr, bdc->srr.dqp_index); + for (i = 0; i < NUM_SR_ENTRIES; i++) { + sr = &bdc->srr.sr_bds[i]; + dev_vdbg(bdc->dev, "%llx %08x %08x %08x %08x\n", + (unsigned long long)addr, + le32_to_cpu(sr->offset[0]), + le32_to_cpu(sr->offset[1]), + le32_to_cpu(sr->offset[2]), + le32_to_cpu(sr->offset[3])); + addr += sizeof(*sr); + } +} + +void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep) +{ + struct bd_list *bd_list = &ep->bd_list; + struct bd_table *bd_table; + struct bdc_bd *bd; + int tbi, bdi, gbdi; + dma_addr_t dma; + + gbdi = 0; + dev_vdbg(bdc->dev, + "Dump bd list for %s epnum:%d\n", + ep->name, ep->ep_num); + + dev_vdbg(bdc->dev, + "tabs:%d max_bdi:%d eqp_bdi:%d hwd_bdi:%d num_bds_table:%d\n", + bd_list->num_tabs, bd_list->max_bdi, bd_list->eqp_bdi, + bd_list->hwd_bdi, bd_list->num_bds_table); + + for (tbi = 0; tbi < bd_list->num_tabs; tbi++) { + bd_table = bd_list->bd_table_array[tbi]; + for (bdi = 0; bdi < bd_list->num_bds_table; bdi++) { + bd = bd_table->start_bd + bdi; + dma = bd_table->dma + (sizeof(struct bdc_bd) * bdi); + dev_vdbg(bdc->dev, + "tbi:%2d bdi:%2d gbdi:%2d virt:%p phys:%llx %08x %08x %08x %08x\n", + tbi, bdi, gbdi++, bd, (unsigned long long)dma, + le32_to_cpu(bd->offset[0]), + le32_to_cpu(bd->offset[1]), + le32_to_cpu(bd->offset[2]), + le32_to_cpu(bd->offset[3])); + } + dev_vdbg(bdc->dev, "\n\n"); + } +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.h b/drivers/usb/gadget/udc/bdc/bdc_dbg.h new file mode 100644 index 0000000..338a6c7 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.h @@ -0,0 +1,37 @@ +/* + * bdc_dbg.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __LINUX_BDC_DBG_H__ +#define __LINUX_BDC_DBG_H__ + +#include "bdc.h" + +#ifdef CONFIG_USB_GADGET_VERBOSE +void bdc_dbg_bd_list(struct bdc *, struct bdc_ep*); +void bdc_dbg_srr(struct bdc *, u32); +void bdc_dbg_regs(struct bdc *); +void bdc_dump_epsts(struct bdc *); +#else +static inline void bdc_dbg_regs(struct bdc *bdc) +{ } + +static inline void bdc_dbg_srr(struct bdc *bdc, u32 srr_num) +{ } + +static inline void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep) +{ } + +static inline void bdc_dump_epsts(struct bdc *bdc) +{ } +#endif /* CONFIG_USB_GADGET_VERBOSE */ +#endif /* __LINUX_BDC_DBG_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c new file mode 100644 index 0000000..15da5b1 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c @@ -0,0 +1,2023 @@ +/* + * bdc_ep.c - BRCM BDC USB3.0 device controller endpoint related functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/dmapool.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <asm/unaligned.h> +#include <linux/platform_device.h> +#include <linux/usb/composite.h> + +#include "bdc.h" +#include "bdc_ep.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +static const char * const ep0_state_string[] = { + "WAIT_FOR_SETUP", + "WAIT_FOR_DATA_START", + "WAIT_FOR_DATA_XMIT", + "WAIT_FOR_STATUS_START", + "WAIT_FOR_STATUS_XMIT", + "STATUS_PENDING" +}; + +/* Free the bdl during ep disable */ +static void ep_bd_list_free(struct bdc_ep *ep, u32 num_tabs) +{ + struct bd_list *bd_list = &ep->bd_list; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + int index; + + dev_dbg(bdc->dev, "%s ep:%s num_tabs:%d\n", + __func__, ep->name, num_tabs); + + if (!bd_list->bd_table_array) { + dev_dbg(bdc->dev, "%s already freed\n", ep->name); + return; + } + for (index = 0; index < num_tabs; index++) { + /* + * check if the bd_table struct is allocated ? + * if yes, then check if bd memory has been allocated, then + * free the dma_pool and also the bd_table struct memory + */ + bd_table = bd_list->bd_table_array[index]; + dev_dbg(bdc->dev, "bd_table:%p index:%d\n", bd_table, index); + if (!bd_table) { + dev_dbg(bdc->dev, "bd_table not allocated\n"); + continue; + } + if (!bd_table->start_bd) { + dev_dbg(bdc->dev, "bd dma pool not allocted\n"); + continue; + } + + dev_dbg(bdc->dev, + "Free dma pool start_bd:%p dma:%llx\n", + bd_table->start_bd, + (unsigned long long)bd_table->dma); + + dma_pool_free(bdc->bd_table_pool, + bd_table->start_bd, + bd_table->dma); + /* Free the bd_table structure */ + kfree(bd_table); + } + /* Free the bd table array */ + kfree(ep->bd_list.bd_table_array); +} + +/* + * chain the tables, by insteting a chain bd at the end of prev_table, pointing + * to next_table + */ +static inline void chain_table(struct bd_table *prev_table, + struct bd_table *next_table, + u32 bd_p_tab) +{ + /* Chain the prev table to next table */ + prev_table->start_bd[bd_p_tab-1].offset[0] = + cpu_to_le32(lower_32_bits(next_table->dma)); + + prev_table->start_bd[bd_p_tab-1].offset[1] = + cpu_to_le32(upper_32_bits(next_table->dma)); + + prev_table->start_bd[bd_p_tab-1].offset[2] = + 0x0; + + prev_table->start_bd[bd_p_tab-1].offset[3] = + cpu_to_le32(MARK_CHAIN_BD); +} + +/* Allocate the bdl for ep, during config ep */ +static int ep_bd_list_alloc(struct bdc_ep *ep) +{ + struct bd_table *prev_table = NULL; + int index, num_tabs, bd_p_tab; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + dma_addr_t dma; + + if (usb_endpoint_xfer_isoc(ep->desc)) + num_tabs = NUM_TABLES_ISOCH; + else + num_tabs = NUM_TABLES; + + bd_p_tab = NUM_BDS_PER_TABLE; + /* if there is only 1 table in bd list then loop chain to self */ + dev_dbg(bdc->dev, + "%s ep:%p num_tabs:%d\n", + __func__, ep, num_tabs); + + /* Allocate memory for table array */ + ep->bd_list.bd_table_array = kzalloc( + num_tabs * sizeof(struct bd_table *), + GFP_ATOMIC); + if (!ep->bd_list.bd_table_array) + return -ENOMEM; + + /* Allocate memory for each table */ + for (index = 0; index < num_tabs; index++) { + /* Allocate memory for bd_table structure */ + bd_table = kzalloc(sizeof(struct bd_table), GFP_ATOMIC); + if (!bd_table) + goto fail; + + bd_table->start_bd = dma_pool_alloc(bdc->bd_table_pool, + GFP_ATOMIC, + &dma); + if (!bd_table->start_bd) + goto fail; + + bd_table->dma = dma; + + dev_dbg(bdc->dev, + "index:%d start_bd:%p dma=%08llx prev_table:%p\n", + index, bd_table->start_bd, + (unsigned long long)bd_table->dma, prev_table); + + ep->bd_list.bd_table_array[index] = bd_table; + memset(bd_table->start_bd, 0, bd_p_tab * sizeof(struct bdc_bd)); + if (prev_table) + chain_table(prev_table, bd_table, bd_p_tab); + + prev_table = bd_table; + } + chain_table(prev_table, ep->bd_list.bd_table_array[0], bd_p_tab); + /* Memory allocation is successful, now init the internal fields */ + ep->bd_list.num_tabs = num_tabs; + ep->bd_list.max_bdi = (num_tabs * bd_p_tab) - 1; + ep->bd_list.num_tabs = num_tabs; + ep->bd_list.num_bds_table = bd_p_tab; + ep->bd_list.eqp_bdi = 0; + ep->bd_list.hwd_bdi = 0; + + return 0; +fail: + /* Free the bd_table_array, bd_table struct, bd's */ + ep_bd_list_free(ep, num_tabs); + + return -ENOMEM; +} + +/* returns how many bd's are need for this transfer */ +static inline int bd_needed_req(struct bdc_req *req) +{ + int bd_needed = 0; + int remaining; + + /* 1 bd needed for 0 byte transfer */ + if (req->usb_req.length == 0) + return 1; + + /* remaining bytes after tranfering all max BD size BD's */ + remaining = req->usb_req.length % BD_MAX_BUFF_SIZE; + if (remaining) + bd_needed++; + + /* How many maximum BUFF size BD's ? */ + remaining = req->usb_req.length / BD_MAX_BUFF_SIZE; + bd_needed += remaining; + + return bd_needed; +} + +/* returns the bd index(bdi) corresponding to bd dma address */ +static int bd_add_to_bdi(struct bdc_ep *ep, dma_addr_t bd_dma_addr) +{ + struct bd_list *bd_list = &ep->bd_list; + dma_addr_t dma_first_bd, dma_last_bd; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + bool found = false; + int tbi, bdi; + + dma_first_bd = dma_last_bd = 0; + dev_dbg(bdc->dev, "%s %llx\n", + __func__, (unsigned long long)bd_dma_addr); + /* + * Find in which table this bd_dma_addr belongs?, go through the table + * array and compare addresses of first and last address of bd of each + * table + */ + for (tbi = 0; tbi < bd_list->num_tabs; tbi++) { + bd_table = bd_list->bd_table_array[tbi]; + dma_first_bd = bd_table->dma; + dma_last_bd = bd_table->dma + + (sizeof(struct bdc_bd) * + (bd_list->num_bds_table - 1)); + dev_dbg(bdc->dev, "dma_first_bd:%llx dma_last_bd:%llx\n", + (unsigned long long)dma_first_bd, + (unsigned long long)dma_last_bd); + if (bd_dma_addr >= dma_first_bd && bd_dma_addr <= dma_last_bd) { + found = true; + break; + } + } + if (unlikely(!found)) { + dev_err(bdc->dev, "%s FATAL err, bd not found\n", __func__); + return -EINVAL; + } + /* Now we know the table, find the bdi */ + bdi = (bd_dma_addr - dma_first_bd) / sizeof(struct bdc_bd); + + /* return the global bdi, to compare with ep eqp_bdi */ + return (bdi + (tbi * bd_list->num_bds_table)); +} + +/* returns the table index(tbi) of the given bdi */ +static int bdi_to_tbi(struct bdc_ep *ep, int bdi) +{ + int tbi; + + tbi = bdi / ep->bd_list.num_bds_table; + dev_vdbg(ep->bdc->dev, + "bdi:%d num_bds_table:%d tbi:%d\n", + bdi, ep->bd_list.num_bds_table, tbi); + + return tbi; +} + +/* Find the bdi last bd in the transfer */ +static inline int find_end_bdi(struct bdc_ep *ep, int next_hwd_bdi) +{ + int end_bdi; + + end_bdi = next_hwd_bdi - 1; + if (end_bdi < 0) + end_bdi = ep->bd_list.max_bdi - 1; + else if ((end_bdi % (ep->bd_list.num_bds_table-1)) == 0) + end_bdi--; + + return end_bdi; +} + +/* + * How many transfer bd's are available on this ep bdl, chain bds are not + * counted in available bds + */ +static int bd_available_ep(struct bdc_ep *ep) +{ + struct bd_list *bd_list = &ep->bd_list; + int available1, available2; + struct bdc *bdc = ep->bdc; + int chain_bd1, chain_bd2; + int available_bd = 0; + + available1 = available2 = chain_bd1 = chain_bd2 = 0; + /* if empty then we have all bd's available - number of chain bd's */ + if (bd_list->eqp_bdi == bd_list->hwd_bdi) + return bd_list->max_bdi - bd_list->num_tabs; + + /* + * Depending upon where eqp and dqp pointers are, caculate number + * of avaialble bd's + */ + if (bd_list->hwd_bdi < bd_list->eqp_bdi) { + /* available bd's are from eqp..max_bds + 0..dqp - chain_bds */ + available1 = bd_list->max_bdi - bd_list->eqp_bdi; + available2 = bd_list->hwd_bdi; + chain_bd1 = available1 / bd_list->num_bds_table; + chain_bd2 = available2 / bd_list->num_bds_table; + dev_vdbg(bdc->dev, "chain_bd1:%d chain_bd2:%d\n", + chain_bd1, chain_bd2); + available_bd = available1 + available2 - chain_bd1 - chain_bd2; + } else { + /* available bd's are from eqp..dqp - number of chain bd's */ + available1 = bd_list->hwd_bdi - bd_list->eqp_bdi; + /* if gap between eqp and dqp is less than NUM_BDS_PER_TABLE */ + if ((bd_list->hwd_bdi - bd_list->eqp_bdi) + <= bd_list->num_bds_table) { + /* If there any chain bd in between */ + if (!(bdi_to_tbi(ep, bd_list->hwd_bdi) + == bdi_to_tbi(ep, bd_list->eqp_bdi))) { + available_bd = available1 - 1; + } + } else { + chain_bd1 = available1 / bd_list->num_bds_table; + available_bd = available1 - chain_bd1; + } + } + /* + * we need to keep one extra bd to check if ring is full or empty so + * reduce by 1 + */ + available_bd--; + dev_vdbg(bdc->dev, "available_bd:%d\n", available_bd); + + return available_bd; +} + +/* Notify the hardware after queueing the bd to bdl */ +void bdc_notify_xfr(struct bdc *bdc, u32 epnum) +{ + struct bdc_ep *ep = bdc->bdc_ep_array[epnum]; + + dev_vdbg(bdc->dev, "%s epnum:%d\n", __func__, epnum); + /* + * We don't have anyway to check if ep state is running, + * except the software flags. + */ + if (unlikely(ep->flags & BDC_EP_STOP)) + ep->flags &= ~BDC_EP_STOP; + + bdc_writel(bdc->regs, BDC_XSFNTF, epnum); +} + +/* returns the bd corresponding to bdi */ +static struct bdc_bd *bdi_to_bd(struct bdc_ep *ep, int bdi) +{ + int tbi = bdi_to_tbi(ep, bdi); + int local_bdi = 0; + + local_bdi = bdi - (tbi * ep->bd_list.num_bds_table); + dev_vdbg(ep->bdc->dev, + "%s bdi:%d local_bdi:%d\n", + __func__, bdi, local_bdi); + + return (ep->bd_list.bd_table_array[tbi]->start_bd + local_bdi); +} + +/* Advance the enqueue pointer */ +static void ep_bdlist_eqp_adv(struct bdc_ep *ep) +{ + ep->bd_list.eqp_bdi++; + /* if it's chain bd, then move to next */ + if (((ep->bd_list.eqp_bdi + 1) % ep->bd_list.num_bds_table) == 0) + ep->bd_list.eqp_bdi++; + + /* if the eqp is pointing to last + 1 then move back to 0 */ + if (ep->bd_list.eqp_bdi == (ep->bd_list.max_bdi + 1)) + ep->bd_list.eqp_bdi = 0; +} + +/* Setup the first bd for ep0 transfer */ +static int setup_first_bd_ep0(struct bdc *bdc, struct bdc_req *req, u32 *dword3) +{ + u16 wValue; + u32 req_len; + + req->ep->dir = 0; + req_len = req->usb_req.length; + switch (bdc->ep0_state) { + case WAIT_FOR_DATA_START: + *dword3 |= BD_TYPE_DS; + if (bdc->setup_pkt.bRequestType & USB_DIR_IN) + *dword3 |= BD_DIR_IN; + + /* check if zlp will be needed */ + wValue = le16_to_cpu(bdc->setup_pkt.wValue); + if ((wValue > req_len) && + (req_len % bdc->gadget.ep0->maxpacket == 0)) { + dev_dbg(bdc->dev, "ZLP needed wVal:%d len:%d MaxP:%d\n", + wValue, req_len, + bdc->gadget.ep0->maxpacket); + bdc->zlp_needed = true; + } + break; + + case WAIT_FOR_STATUS_START: + *dword3 |= BD_TYPE_SS; + if (!le16_to_cpu(bdc->setup_pkt.wLength) || + !(bdc->setup_pkt.bRequestType & USB_DIR_IN)) + *dword3 |= BD_DIR_IN; + break; + default: + dev_err(bdc->dev, + "Unknown ep0 state for queueing bd ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + return -EINVAL; + } + + return 0; +} + +/* Setup the bd dma descriptor for a given request */ +static int setup_bd_list_xfr(struct bdc *bdc, struct bdc_req *req, int num_bds) +{ + dma_addr_t buf_add = req->usb_req.dma; + u32 maxp, tfs, dword2, dword3; + struct bd_transfer *bd_xfr; + struct bd_list *bd_list; + struct bdc_ep *ep; + struct bdc_bd *bd; + int ret, bdnum; + u32 req_len; + + ep = req->ep; + bd_list = &ep->bd_list; + bd_xfr = &req->bd_xfr; + bd_xfr->req = req; + bd_xfr->start_bdi = bd_list->eqp_bdi; + bd = bdi_to_bd(ep, bd_list->eqp_bdi); + req_len = req->usb_req.length; + maxp = usb_endpoint_maxp(ep->desc) & 0x7ff; + tfs = roundup(req->usb_req.length, maxp); + tfs = tfs/maxp; + dev_vdbg(bdc->dev, "%s ep:%s num_bds:%d tfs:%d r_len:%d bd:%p\n", + __func__, ep->name, num_bds, tfs, req_len, bd); + + for (bdnum = 0; bdnum < num_bds; bdnum++) { + dword2 = dword3 = 0; + /* First bd */ + if (!bdnum) { + dword3 |= BD_SOT|BD_SBF|(tfs<<BD_TFS_SHIFT); + dword2 |= BD_LTF; + /* format of first bd for ep0 is different than other */ + if (ep->ep_num == 1) + ret = setup_first_bd_ep0(bdc, req, &dword3); + if (ret) + return ret; + } + if (!req->ep->dir) + dword3 |= BD_ISP; + + if (req_len > BD_MAX_BUFF_SIZE) { + dword2 |= BD_MAX_BUFF_SIZE; + req_len -= BD_MAX_BUFF_SIZE; + } else { + /* this should be the last bd */ + dword2 |= req_len; + dword3 |= BD_IOC; + dword3 |= BD_EOT; + } + /* Currently only 1 INT target is supported */ + dword2 |= BD_INTR_TARGET(0); + bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi); + if (unlikely(!bd)) { + dev_err(bdc->dev, "Err bd pointing to wrong addr\n"); + return -EINVAL; + } + /* write bd */ + bd->offset[0] = cpu_to_le32(lower_32_bits(buf_add)); + bd->offset[1] = cpu_to_le32(upper_32_bits(buf_add)); + bd->offset[2] = cpu_to_le32(dword2); + bd->offset[3] = cpu_to_le32(dword3); + /* advance eqp pointer */ + ep_bdlist_eqp_adv(ep); + /* advance the buff pointer */ + buf_add += BD_MAX_BUFF_SIZE; + dev_vdbg(bdc->dev, "buf_add:%08llx req_len:%d bd:%p eqp:%d\n", + (unsigned long long)buf_add, req_len, bd, + ep->bd_list.eqp_bdi); + bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi); + bd->offset[3] = cpu_to_le32(BD_SBF); + } + /* clear the STOP BD fetch bit from the first bd of this xfr */ + bd = bdi_to_bd(ep, bd_xfr->start_bdi); + bd->offset[3] &= cpu_to_le32(~BD_SBF); + /* the new eqp will be next hw dqp */ + bd_xfr->num_bds = num_bds; + bd_xfr->next_hwd_bdi = ep->bd_list.eqp_bdi; + /* everything is written correctly before notifying the HW */ + wmb(); + + return 0; +} + +/* Queue the xfr */ +static int bdc_queue_xfr(struct bdc *bdc, struct bdc_req *req) +{ + int num_bds, bd_available; + struct bdc_ep *ep; + int ret; + + ep = req->ep; + dev_dbg(bdc->dev, "%s req:%p\n", __func__, req); + dev_dbg(bdc->dev, "eqp_bdi:%d hwd_bdi:%d\n", + ep->bd_list.eqp_bdi, ep->bd_list.hwd_bdi); + + num_bds = bd_needed_req(req); + bd_available = bd_available_ep(ep); + + /* how many bd's are avaialble on ep */ + if (num_bds > bd_available) + return -ENOMEM; + + ret = setup_bd_list_xfr(bdc, req, num_bds); + if (ret) + return ret; + list_add_tail(&req->queue, &ep->queue); + bdc_dbg_bd_list(bdc, ep); + bdc_notify_xfr(bdc, ep->ep_num); + + return 0; +} + +/* callback to gadget layer when xfr completes */ +static void bdc_req_complete(struct bdc_ep *ep, struct bdc_req *req, + int status) +{ + struct bdc *bdc = ep->bdc; + + if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) + return; + + dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status); + list_del(&req->queue); + req->usb_req.status = status; + usb_gadget_unmap_request(&bdc->gadget, &req->usb_req, ep->dir); + if (req->usb_req.complete) { + spin_unlock(&bdc->lock); + usb_gadget_giveback_request(&ep->usb_ep, &req->usb_req); + spin_lock(&bdc->lock); + } +} + +/* Disable the endpoint */ +int bdc_ep_disable(struct bdc_ep *ep) +{ + struct bdc_req *req; + struct bdc *bdc; + int ret; + + ret = 0; + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s() ep->ep_num=%d\n", __func__, ep->ep_num); + /* Stop the endpoint */ + ret = bdc_stop_ep(bdc, ep->ep_num); + + /* + * Intentionally don't check the ret value of stop, it can fail in + * disconnect scenarios, continue with dconfig + */ + /* de-queue any pending requests */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct bdc_req, + queue); + bdc_req_complete(ep, req, -ESHUTDOWN); + } + /* deconfigure the endpoint */ + ret = bdc_dconfig_ep(bdc, ep); + if (ret) + dev_warn(bdc->dev, + "dconfig fail but continue with memory free"); + + ep->flags = 0; + /* ep0 memory is not freed, but reused on next connect sr */ + if (ep->ep_num == 1) + return 0; + + /* Free the bdl memory */ + ep_bd_list_free(ep, ep->bd_list.num_tabs); + ep->desc = NULL; + ep->comp_desc = NULL; + ep->usb_ep.desc = NULL; + ep->ep_type = 0; + + return ret; +} + +/* Enable the ep */ +int bdc_ep_enable(struct bdc_ep *ep) +{ + struct bdc *bdc; + int ret = 0; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s NUM_TABLES:%d %d\n", + __func__, NUM_TABLES, NUM_TABLES_ISOCH); + + ret = ep_bd_list_alloc(ep); + if (ret) { + dev_err(bdc->dev, "ep bd list allocation failed:%d\n", ret); + return -ENOMEM; + } + bdc_dbg_bd_list(bdc, ep); + /* only for ep0: config ep is called for ep0 from connect event */ + ep->flags |= BDC_EP_ENABLED; + if (ep->ep_num == 1) + return ret; + + /* Issue a configure endpoint command */ + ret = bdc_config_ep(bdc, ep); + if (ret) + return ret; + + ep->usb_ep.maxpacket = usb_endpoint_maxp(ep->desc); + ep->usb_ep.desc = ep->desc; + ep->usb_ep.comp_desc = ep->comp_desc; + ep->ep_type = usb_endpoint_type(ep->desc); + ep->flags |= BDC_EP_ENABLED; + + return 0; +} + +/* EP0 related code */ + +/* Queue a status stage BD */ +static int ep0_queue_status_stage(struct bdc *bdc) +{ + struct bdc_req *status_req; + struct bdc_ep *ep; + + status_req = &bdc->status_req; + ep = bdc->bdc_ep_array[1]; + status_req->ep = ep; + status_req->usb_req.length = 0; + status_req->usb_req.status = -EINPROGRESS; + status_req->usb_req.actual = 0; + status_req->usb_req.complete = NULL; + bdc_queue_xfr(bdc, status_req); + + return 0; +} + +/* Queue xfr on ep0 */ +static int ep0_queue(struct bdc_ep *ep, struct bdc_req *req) +{ + struct bdc *bdc; + int ret; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s()\n", __func__); + req->usb_req.actual = 0; + req->usb_req.status = -EINPROGRESS; + req->epnum = ep->ep_num; + + if (bdc->delayed_status) { + bdc->delayed_status = false; + /* if status stage was delayed? */ + if (bdc->ep0_state == WAIT_FOR_STATUS_START) { + /* Queue a status stage BD */ + ep0_queue_status_stage(bdc); + bdc->ep0_state = WAIT_FOR_STATUS_XMIT; + return 0; + } + } else { + /* + * if delayed status is false and 0 length transfer is requested + * i.e. for status stage of some setup request, then just + * return from here the status stage is queued independently + */ + if (req->usb_req.length == 0) + return 0; + + } + ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir); + if (ret) { + dev_err(bdc->dev, "dma mapping failed %s\n", ep->name); + return ret; + } + + return bdc_queue_xfr(bdc, req); +} + +/* Queue data stage */ +static int ep0_queue_data_stage(struct bdc *bdc) +{ + struct usb_request *ep0_usb_req; + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s\n", __func__); + ep0_usb_req = &bdc->ep0_req.usb_req; + ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.ep = ep; + bdc->ep0_req.usb_req.complete = NULL; + + return ep0_queue(ep, &bdc->ep0_req); +} + +/* Queue req on ep */ +static int ep_queue(struct bdc_ep *ep, struct bdc_req *req) +{ + struct bdc *bdc; + int ret = 0; + + bdc = ep->bdc; + if (!req || !ep || !ep->usb_ep.desc) + return -EINVAL; + + req->usb_req.actual = 0; + req->usb_req.status = -EINPROGRESS; + req->epnum = ep->ep_num; + + ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir); + if (ret) { + dev_err(bdc->dev, "dma mapping failed\n"); + return ret; + } + + return bdc_queue_xfr(bdc, req); +} + +/* Dequeue a request from ep */ +static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req) +{ + int start_bdi, end_bdi, tbi, eqp_bdi, curr_hw_dqpi; + bool start_pending, end_pending; + bool first_remove = false; + struct bdc_req *first_req; + struct bdc_bd *bd_start; + struct bd_table *table; + dma_addr_t next_bd_dma; + u64 deq_ptr_64 = 0; + struct bdc *bdc; + u32 tmp_32; + int ret; + + bdc = ep->bdc; + start_pending = end_pending = false; + eqp_bdi = ep->bd_list.eqp_bdi - 1; + + if (eqp_bdi < 0) + eqp_bdi = ep->bd_list.max_bdi; + + start_bdi = req->bd_xfr.start_bdi; + end_bdi = find_end_bdi(ep, req->bd_xfr.next_hwd_bdi); + + dev_dbg(bdc->dev, "%s ep:%s start:%d end:%d\n", + __func__, ep->name, start_bdi, end_bdi); + dev_dbg(bdc->dev, "ep_dequeue ep=%p ep->desc=%p\n", + ep, (void *)ep->usb_ep.desc); + /* Stop the ep to see where the HW is ? */ + ret = bdc_stop_ep(bdc, ep->ep_num); + /* if there is an issue with stopping ep, then no need to go further */ + if (ret) + return 0; + + /* + * After endpoint is stopped, there can be 3 cases, the request + * is processed, pending or in the middle of processing + */ + + /* The current hw dequeue pointer */ + tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(0)); + deq_ptr_64 = tmp_32; + tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(1)); + deq_ptr_64 |= ((u64)tmp_32 << 32); + + /* we have the dma addr of next bd that will be fetched by hardware */ + curr_hw_dqpi = bd_add_to_bdi(ep, deq_ptr_64); + if (curr_hw_dqpi < 0) + return curr_hw_dqpi; + + /* + * curr_hw_dqpi points to actual dqp of HW and HW owns bd's from + * curr_hw_dqbdi..eqp_bdi. + */ + + /* Check if start_bdi and end_bdi are in range of HW owned BD's */ + if (curr_hw_dqpi > eqp_bdi) { + /* there is a wrap from last to 0 */ + if (start_bdi >= curr_hw_dqpi || start_bdi <= eqp_bdi) { + start_pending = true; + end_pending = true; + } else if (end_bdi >= curr_hw_dqpi || end_bdi <= eqp_bdi) { + end_pending = true; + } + } else { + if (start_bdi >= curr_hw_dqpi) { + start_pending = true; + end_pending = true; + } else if (end_bdi >= curr_hw_dqpi) { + end_pending = true; + } + } + dev_dbg(bdc->dev, + "start_pending:%d end_pending:%d speed:%d\n", + start_pending, end_pending, bdc->gadget.speed); + + /* If both start till end are processes, we cannot deq req */ + if (!start_pending && !end_pending) + return -EINVAL; + + /* + * if ep_dequeue is called after disconnect then just return + * success from here + */ + if (bdc->gadget.speed == USB_SPEED_UNKNOWN) + return 0; + tbi = bdi_to_tbi(ep, req->bd_xfr.next_hwd_bdi); + table = ep->bd_list.bd_table_array[tbi]; + next_bd_dma = table->dma + + sizeof(struct bdc_bd)*(req->bd_xfr.next_hwd_bdi - + tbi * ep->bd_list.num_bds_table); + + first_req = list_first_entry(&ep->queue, struct bdc_req, + queue); + + if (req == first_req) + first_remove = true; + + /* + * Due to HW limitation we need to bypadd chain bd's and issue ep_bla, + * incase if start is pending this is the first request in the list + * then issue ep_bla instead of marking as chain bd + */ + if (start_pending && !first_remove) { + /* + * Mark the start bd as Chain bd, and point the chain + * bd to next_bd_dma + */ + bd_start = bdi_to_bd(ep, start_bdi); + bd_start->offset[0] = cpu_to_le32(lower_32_bits(next_bd_dma)); + bd_start->offset[1] = cpu_to_le32(upper_32_bits(next_bd_dma)); + bd_start->offset[2] = 0x0; + bd_start->offset[3] = cpu_to_le32(MARK_CHAIN_BD); + bdc_dbg_bd_list(bdc, ep); + } else if (end_pending) { + /* + * The transfer is stopped in the middle, move the + * HW deq pointer to next_bd_dma + */ + ret = bdc_ep_bla(bdc, ep, next_bd_dma); + if (ret) { + dev_err(bdc->dev, "error in ep_bla:%d\n", ret); + return ret; + } + } + + return 0; +} + +/* Halt/Clear the ep based on value */ +static int ep_set_halt(struct bdc_ep *ep, u32 value) +{ + struct bdc *bdc; + int ret; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value); + + if (value) { + dev_dbg(bdc->dev, "Halt\n"); + if (ep->ep_num == 1) + bdc->ep0_state = WAIT_FOR_SETUP; + + ret = bdc_ep_set_stall(bdc, ep->ep_num); + if (ret) + dev_err(bdc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", ep->name); + else + ep->flags |= BDC_EP_STALL; + } else { + /* Clear */ + dev_dbg(bdc->dev, "Before Clear\n"); + ret = bdc_ep_clear_stall(bdc, ep->ep_num); + if (ret) + dev_err(bdc->dev, "failed to %s STALL on %s\n", + value ? "set" : "clear", ep->name); + else + ep->flags &= ~BDC_EP_STALL; + dev_dbg(bdc->dev, "After Clear\n"); + } + + return ret; +} + +/* Free all the ep */ +void bdc_free_ep(struct bdc *bdc) +{ + struct bdc_ep *ep; + u8 epnum; + + dev_dbg(bdc->dev, "%s\n", __func__); + for (epnum = 1; epnum < bdc->num_eps; epnum++) { + ep = bdc->bdc_ep_array[epnum]; + if (!ep) + continue; + + if (ep->flags & BDC_EP_ENABLED) + ep_bd_list_free(ep, ep->bd_list.num_tabs); + + /* ep0 is not in this gadget list */ + if (epnum != 1) + list_del(&ep->usb_ep.ep_list); + + kfree(ep); + } +} + +/* USB2 spec, section 7.1.20 */ +static int bdc_set_test_mode(struct bdc *bdc) +{ + u32 usb2_pm; + + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + usb2_pm &= ~BDC_PTC_MASK; + dev_dbg(bdc->dev, "%s\n", __func__); + switch (bdc->test_mode) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + usb2_pm |= bdc->test_mode << 28; + break; + default: + return -EINVAL; + } + dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm); + bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm); + + return 0; +} + +/* + * Helper function to handle Transfer status report with status as either + * success or short + */ +static void handle_xsr_succ_status(struct bdc *bdc, struct bdc_ep *ep, + struct bdc_sr *sreport) +{ + int short_bdi, start_bdi, end_bdi, max_len_bds, chain_bds; + struct bd_list *bd_list = &ep->bd_list; + int actual_length, length_short; + struct bd_transfer *bd_xfr; + struct bdc_bd *short_bd; + struct bdc_req *req; + u64 deq_ptr_64 = 0; + int status = 0; + int sr_status; + u32 tmp_32; + + dev_dbg(bdc->dev, "%s ep:%p\n", __func__, ep); + bdc_dbg_srr(bdc, 0); + /* do not process thie sr if ignore flag is set */ + if (ep->ignore_next_sr) { + ep->ignore_next_sr = false; + return; + } + + if (unlikely(list_empty(&ep->queue))) { + dev_warn(bdc->dev, "xfr srr with no BD's queued\n"); + return; + } + req = list_entry(ep->queue.next, struct bdc_req, + queue); + + bd_xfr = &req->bd_xfr; + sr_status = XSF_STS(le32_to_cpu(sreport->offset[3])); + + /* + * sr_status is short and this transfer has more than 1 bd then it needs + * special handling, this is only applicable for bulk and ctrl + */ + if (sr_status == XSF_SHORT && bd_xfr->num_bds > 1) { + /* + * This is multi bd xfr, lets see which bd + * caused short transfer and how many bytes have been + * transferred so far. + */ + tmp_32 = le32_to_cpu(sreport->offset[0]); + deq_ptr_64 = tmp_32; + tmp_32 = le32_to_cpu(sreport->offset[1]); + deq_ptr_64 |= ((u64)tmp_32 << 32); + short_bdi = bd_add_to_bdi(ep, deq_ptr_64); + if (unlikely(short_bdi < 0)) + dev_warn(bdc->dev, "bd doesn't exist?\n"); + + start_bdi = bd_xfr->start_bdi; + /* + * We know the start_bdi and short_bdi, how many xfr + * bds in between + */ + if (start_bdi <= short_bdi) { + max_len_bds = short_bdi - start_bdi; + if (max_len_bds <= bd_list->num_bds_table) { + if (!(bdi_to_tbi(ep, start_bdi) == + bdi_to_tbi(ep, short_bdi))) + max_len_bds--; + } else { + chain_bds = max_len_bds/bd_list->num_bds_table; + max_len_bds -= chain_bds; + } + } else { + /* there is a wrap in the ring within a xfr */ + chain_bds = (bd_list->max_bdi - start_bdi)/ + bd_list->num_bds_table; + chain_bds += short_bdi/bd_list->num_bds_table; + max_len_bds = bd_list->max_bdi - start_bdi; + max_len_bds += short_bdi; + max_len_bds -= chain_bds; + } + /* max_len_bds is the number of full length bds */ + end_bdi = find_end_bdi(ep, bd_xfr->next_hwd_bdi); + if (!(end_bdi == short_bdi)) + ep->ignore_next_sr = true; + + actual_length = max_len_bds * BD_MAX_BUFF_SIZE; + short_bd = bdi_to_bd(ep, short_bdi); + /* length queued */ + length_short = le32_to_cpu(short_bd->offset[2]) & 0x1FFFFF; + /* actual length trensfered */ + length_short -= SR_BD_LEN(le32_to_cpu(sreport->offset[2])); + actual_length += length_short; + req->usb_req.actual = actual_length; + } else { + req->usb_req.actual = req->usb_req.length - + SR_BD_LEN(le32_to_cpu(sreport->offset[2])); + dev_dbg(bdc->dev, + "len=%d actual=%d bd_xfr->next_hwd_bdi:%d\n", + req->usb_req.length, req->usb_req.actual, + bd_xfr->next_hwd_bdi); + } + + /* Update the dequeue pointer */ + ep->bd_list.hwd_bdi = bd_xfr->next_hwd_bdi; + if (req->usb_req.actual < req->usb_req.length) { + dev_dbg(bdc->dev, "short xfr on %d\n", ep->ep_num); + if (req->usb_req.short_not_ok) + status = -EREMOTEIO; + } + bdc_req_complete(ep, bd_xfr->req, status); +} + +/* EP0 setup related packet handlers */ + +/* + * Setup packet received, just store the packet and process on next DS or SS + * started SR + */ +void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct usb_ctrlrequest *setup_pkt; + u32 len; + + dev_dbg(bdc->dev, + "%s ep0_state:%s\n", + __func__, ep0_state_string[bdc->ep0_state]); + /* Store received setup packet */ + setup_pkt = &bdc->setup_pkt; + memcpy(setup_pkt, &sreport->offset[0], sizeof(*setup_pkt)); + len = le16_to_cpu(setup_pkt->wLength); + if (!len) + bdc->ep0_state = WAIT_FOR_STATUS_START; + else + bdc->ep0_state = WAIT_FOR_DATA_START; + + + dev_dbg(bdc->dev, + "%s exit ep0_state:%s\n", + __func__, ep0_state_string[bdc->ep0_state]); +} + +/* Stall ep0 */ +static void ep0_stall(struct bdc *bdc) +{ + struct bdc_ep *ep = bdc->bdc_ep_array[1]; + struct bdc_req *req; + + dev_dbg(bdc->dev, "%s\n", __func__); + bdc->delayed_status = false; + ep_set_halt(ep, 1); + + /* de-queue any pendig requests */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct bdc_req, + queue); + bdc_req_complete(ep, req, -ESHUTDOWN); + } +} + +/* SET_ADD handlers */ +static int ep0_set_address(struct bdc *bdc, struct usb_ctrlrequest *ctrl) +{ + enum usb_device_state state = bdc->gadget.state; + int ret = 0; + u32 addr; + + addr = le16_to_cpu(ctrl->wValue); + dev_dbg(bdc->dev, + "%s addr:%d dev state:%d\n", + __func__, addr, state); + + if (addr > 127) + return -EINVAL; + + switch (state) { + case USB_STATE_DEFAULT: + case USB_STATE_ADDRESS: + /* Issue Address device command */ + ret = bdc_address_device(bdc, addr); + if (ret) + return ret; + + if (addr) + usb_gadget_set_state(&bdc->gadget, USB_STATE_ADDRESS); + else + usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT); + + bdc->dev_addr = addr; + break; + default: + dev_warn(bdc->dev, + "SET Address in wrong device state %d\n", + state); + ret = -EINVAL; + } + + return ret; +} + +/* Handler for SET/CLEAR FEATURE requests for device */ +static int ep0_handle_feature_dev(struct bdc *bdc, u16 wValue, + u16 wIndex, bool set) +{ + enum usb_device_state state = bdc->gadget.state; + u32 usppms = 0; + + dev_dbg(bdc->dev, "%s set:%d dev state:%d\n", + __func__, set, state); + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + dev_dbg(bdc->dev, "USB_DEVICE_REMOTE_WAKEUP\n"); + if (set) + bdc->devstatus |= REMOTE_WAKE_ENABLE; + else + bdc->devstatus &= ~REMOTE_WAKE_ENABLE; + break; + + case USB_DEVICE_TEST_MODE: + dev_dbg(bdc->dev, "USB_DEVICE_TEST_MODE\n"); + if ((wIndex & 0xFF) || + (bdc->gadget.speed != USB_SPEED_HIGH) || !set) + return -EINVAL; + + bdc->test_mode = wIndex >> 8; + break; + + case USB_DEVICE_U1_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_U1_ENABLE\n"); + + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + if (set) { + /* clear previous u1t */ + usppms &= ~BDC_U1T(BDC_U1T_MASK); + usppms |= BDC_U1T(U1_TIMEOUT); + usppms |= BDC_U1E | BDC_PORT_W1S; + bdc->devstatus |= (1 << USB_DEV_STAT_U1_ENABLED); + } else { + usppms &= ~BDC_U1E; + usppms |= BDC_PORT_W1S; + bdc->devstatus &= ~(1 << USB_DEV_STAT_U1_ENABLED); + } + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case USB_DEVICE_U2_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_U2_ENABLE\n"); + + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + if (set) { + usppms |= BDC_U2E; + usppms |= BDC_U2A; + bdc->devstatus |= (1 << USB_DEV_STAT_U2_ENABLED); + } else { + usppms &= ~BDC_U2E; + usppms &= ~BDC_U2A; + bdc->devstatus &= ~(1 << USB_DEV_STAT_U2_ENABLED); + } + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case USB_DEVICE_LTM_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_LTM_ENABLE?\n"); + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + break; + default: + dev_err(bdc->dev, "Unknown wValue:%d\n", wValue); + return -EOPNOTSUPP; + } /* USB_RECIP_DEVICE end */ + + return 0; +} + +/* SET/CLEAR FEATURE handler */ +static int ep0_handle_feature(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt, bool set) +{ + enum usb_device_state state = bdc->gadget.state; + struct bdc_ep *ep; + u16 wValue; + u16 wIndex; + int epnum; + + wValue = le16_to_cpu(setup_pkt->wValue); + wIndex = le16_to_cpu(setup_pkt->wIndex); + + dev_dbg(bdc->dev, + "%s wValue=%d wIndex=%d devstate=%08x speed=%d set=%d", + __func__, wValue, wIndex, state, + bdc->gadget.speed, set); + + switch (setup_pkt->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + return ep0_handle_feature_dev(bdc, wValue, wIndex, set); + case USB_RECIP_INTERFACE: + dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n"); + /* USB3 spec, sec 9.4.9 */ + if (wValue != USB_INTRF_FUNC_SUSPEND) + return -EINVAL; + /* USB3 spec, Table 9-8 */ + if (set) { + if (wIndex & USB_INTRF_FUNC_SUSPEND_RW) { + dev_dbg(bdc->dev, "SET REMOTE_WAKEUP\n"); + bdc->devstatus |= REMOTE_WAKE_ENABLE; + } else { + dev_dbg(bdc->dev, "CLEAR REMOTE_WAKEUP\n"); + bdc->devstatus &= ~REMOTE_WAKE_ENABLE; + } + } + break; + + case USB_RECIP_ENDPOINT: + dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n"); + if (wValue != USB_ENDPOINT_HALT) + return -EINVAL; + + epnum = wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum) { + if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum = epnum * 2 + 1; + else + epnum *= 2; + } else { + epnum = 1; /*EP0*/ + } + /* + * If CLEAR_FEATURE on ep0 then don't do anything as the stall + * condition on ep0 has already been cleared when SETUP packet + * was received. + */ + if (epnum == 1 && !set) { + dev_dbg(bdc->dev, "ep0 stall already cleared\n"); + return 0; + } + dev_dbg(bdc->dev, "epnum=%d\n", epnum); + ep = bdc->bdc_ep_array[epnum]; + if (!ep) + return -EINVAL; + + return ep_set_halt(ep, set); + default: + dev_err(bdc->dev, "Unknown recipient\n"); + return -EINVAL; + } + + return 0; +} + +/* GET_STATUS request handler */ +static int ep0_handle_status(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt) +{ + enum usb_device_state state = bdc->gadget.state; + struct bdc_ep *ep; + u16 usb_status = 0; + u32 epnum; + u16 wIndex; + + /* USB2.0 spec sec 9.4.5 */ + if (state == USB_STATE_DEFAULT) + return -EINVAL; + wIndex = le16_to_cpu(setup_pkt->wIndex); + dev_dbg(bdc->dev, "%s\n", __func__); + usb_status = bdc->devstatus; + switch (setup_pkt->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + dev_dbg(bdc->dev, + "USB_RECIP_DEVICE devstatus:%08x\n", + bdc->devstatus); + /* USB3 spec, sec 9.4.5 */ + if (bdc->gadget.speed == USB_SPEED_SUPER) + usb_status &= ~REMOTE_WAKE_ENABLE; + break; + + case USB_RECIP_INTERFACE: + dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n"); + if (bdc->gadget.speed == USB_SPEED_SUPER) { + /* + * This should come from func for Func remote wkup + * usb_status |=1; + */ + if (bdc->devstatus & REMOTE_WAKE_ENABLE) + usb_status |= REMOTE_WAKE_ENABLE; + } else { + usb_status = 0; + } + + break; + + case USB_RECIP_ENDPOINT: + dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n"); + epnum = wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum) { + if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum = epnum*2 + 1; + else + epnum *= 2; + } else { + epnum = 1; /* EP0 */ + } + + ep = bdc->bdc_ep_array[epnum]; + if (!ep) { + dev_err(bdc->dev, "ISSUE, GET_STATUS for invalid EP ?"); + return -EINVAL; + } + if (ep->flags & BDC_EP_STALL) + usb_status |= 1 << USB_ENDPOINT_HALT; + + break; + default: + dev_err(bdc->dev, "Unknown recipient for get_status\n"); + return -EINVAL; + } + /* prepare a data stage for GET_STATUS */ + dev_dbg(bdc->dev, "usb_status=%08x\n", usb_status); + *(__le16 *)bdc->ep0_response_buff = cpu_to_le16(usb_status); + bdc->ep0_req.usb_req.length = 2; + bdc->ep0_req.usb_req.buf = &bdc->ep0_response_buff; + ep0_queue_data_stage(bdc); + + return 0; +} + +static void ep0_set_sel_cmpl(struct usb_ep *_ep, struct usb_request *_req) +{ + /* ep0_set_sel_cmpl */ +} + +/* Queue data stage to handle 6 byte SET_SEL request */ +static int ep0_set_sel(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt) +{ + struct bdc_ep *ep; + u16 wLength; + u16 wValue; + + dev_dbg(bdc->dev, "%s\n", __func__); + wValue = le16_to_cpu(setup_pkt->wValue); + wLength = le16_to_cpu(setup_pkt->wLength); + if (unlikely(wLength != 6)) { + dev_err(bdc->dev, "%s Wrong wLength:%d\n", __func__, wLength); + return -EINVAL; + } + ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.ep = ep; + bdc->ep0_req.usb_req.length = 6; + bdc->ep0_req.usb_req.buf = bdc->ep0_response_buff; + bdc->ep0_req.usb_req.complete = ep0_set_sel_cmpl; + ep0_queue_data_stage(bdc); + + return 0; +} + +/* + * Queue a 0 byte bd only if wLength is more than the length and and length is + * a multiple of MaxPacket then queue 0 byte BD + */ +static int ep0_queue_zlp(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s\n", __func__); + bdc->ep0_req.ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.usb_req.length = 0; + bdc->ep0_req.usb_req.complete = NULL; + bdc->ep0_state = WAIT_FOR_DATA_START; + ret = bdc_queue_xfr(bdc, &bdc->ep0_req); + if (ret) { + dev_err(bdc->dev, "err queueing zlp :%d\n", ret); + return ret; + } + bdc->ep0_state = WAIT_FOR_DATA_XMIT; + + return 0; +} + +/* Control request handler */ +static int handle_control_request(struct bdc *bdc) +{ + enum usb_device_state state = bdc->gadget.state; + struct usb_ctrlrequest *setup_pkt; + int delegate_setup = 0; + int ret = 0; + int config = 0; + + setup_pkt = &bdc->setup_pkt; + dev_dbg(bdc->dev, "%s\n", __func__); + if ((setup_pkt->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (setup_pkt->bRequest) { + case USB_REQ_SET_ADDRESS: + dev_dbg(bdc->dev, "USB_REQ_SET_ADDRESS\n"); + ret = ep0_set_address(bdc, setup_pkt); + bdc->devstatus &= DEVSTATUS_CLEAR; + break; + + case USB_REQ_SET_CONFIGURATION: + dev_dbg(bdc->dev, "USB_REQ_SET_CONFIGURATION\n"); + if (state == USB_STATE_ADDRESS) { + usb_gadget_set_state(&bdc->gadget, + USB_STATE_CONFIGURED); + } else if (state == USB_STATE_CONFIGURED) { + /* + * USB2 spec sec 9.4.7, if wValue is 0 then dev + * is moved to addressed state + */ + config = le16_to_cpu(setup_pkt->wValue); + if (!config) + usb_gadget_set_state( + &bdc->gadget, + USB_STATE_ADDRESS); + } + delegate_setup = 1; + break; + + case USB_REQ_SET_FEATURE: + dev_dbg(bdc->dev, "USB_REQ_SET_FEATURE\n"); + ret = ep0_handle_feature(bdc, setup_pkt, 1); + break; + + case USB_REQ_CLEAR_FEATURE: + dev_dbg(bdc->dev, "USB_REQ_CLEAR_FEATURE\n"); + ret = ep0_handle_feature(bdc, setup_pkt, 0); + break; + + case USB_REQ_GET_STATUS: + dev_dbg(bdc->dev, "USB_REQ_GET_STATUS\n"); + ret = ep0_handle_status(bdc, setup_pkt); + break; + + case USB_REQ_SET_SEL: + dev_dbg(bdc->dev, "USB_REQ_SET_SEL\n"); + ret = ep0_set_sel(bdc, setup_pkt); + break; + + case USB_REQ_SET_ISOCH_DELAY: + dev_warn(bdc->dev, + "USB_REQ_SET_ISOCH_DELAY not handled\n"); + ret = 0; + break; + default: + delegate_setup = 1; + } + } else { + delegate_setup = 1; + } + + if (delegate_setup) { + spin_unlock(&bdc->lock); + ret = bdc->gadget_driver->setup(&bdc->gadget, setup_pkt); + spin_lock(&bdc->lock); + } + + return ret; +} + +/* EP0: Data stage started */ +void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct bdc_ep *ep; + int ret = 0; + + dev_dbg(bdc->dev, "%s\n", __func__); + ep = bdc->bdc_ep_array[1]; + /* If ep0 was stalled, the clear it first */ + if (ep->flags & BDC_EP_STALL) { + ret = ep_set_halt(ep, 0); + if (ret) + goto err; + } + if (bdc->ep0_state != WAIT_FOR_DATA_START) + dev_warn(bdc->dev, + "Data stage not expected ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + ret = handle_control_request(bdc); + if (ret == USB_GADGET_DELAYED_STATUS) { + /* + * The ep0 state will remain WAIT_FOR_DATA_START till + * we received ep_queue on ep0 + */ + bdc->delayed_status = true; + return; + } + if (!ret) { + bdc->ep0_state = WAIT_FOR_DATA_XMIT; + dev_dbg(bdc->dev, + "ep0_state:%s", ep0_state_string[bdc->ep0_state]); + return; + } +err: + ep0_stall(bdc); +} + +/* EP0: status stage started */ +void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct usb_ctrlrequest *setup_pkt; + struct bdc_ep *ep; + int ret = 0; + + dev_dbg(bdc->dev, + "%s ep0_state:%s", + __func__, ep0_state_string[bdc->ep0_state]); + ep = bdc->bdc_ep_array[1]; + + /* check if ZLP was queued? */ + if (bdc->zlp_needed) + bdc->zlp_needed = false; + + if (ep->flags & BDC_EP_STALL) { + ret = ep_set_halt(ep, 0); + if (ret) + goto err; + } + + if ((bdc->ep0_state != WAIT_FOR_STATUS_START) && + (bdc->ep0_state != WAIT_FOR_DATA_XMIT)) + dev_err(bdc->dev, + "Status stage recv but ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + /* check if data stage is in progress ? */ + if (bdc->ep0_state == WAIT_FOR_DATA_XMIT) { + bdc->ep0_state = STATUS_PENDING; + /* Status stage will be queued upon Data stage transmit event */ + dev_dbg(bdc->dev, + "status started but data not transmitted yet\n"); + return; + } + setup_pkt = &bdc->setup_pkt; + + /* + * 2 stage setup then only process the setup, for 3 stage setup the date + * stage is already handled + */ + if (!le16_to_cpu(setup_pkt->wLength)) { + ret = handle_control_request(bdc); + if (ret == USB_GADGET_DELAYED_STATUS) { + bdc->delayed_status = true; + /* ep0_state will remain WAIT_FOR_STATUS_START */ + return; + } + } + if (!ret) { + /* Queue a status stage BD */ + ep0_queue_status_stage(bdc); + bdc->ep0_state = WAIT_FOR_STATUS_XMIT; + dev_dbg(bdc->dev, + "ep0_state:%s", ep0_state_string[bdc->ep0_state]); + return; + } +err: + ep0_stall(bdc); +} + +/* Helper function to update ep0 upon SR with xsf_succ or xsf_short */ +static void ep0_xsf_complete(struct bdc *bdc, struct bdc_sr *sreport) +{ + dev_dbg(bdc->dev, "%s\n", __func__); + switch (bdc->ep0_state) { + case WAIT_FOR_DATA_XMIT: + bdc->ep0_state = WAIT_FOR_STATUS_START; + break; + case WAIT_FOR_STATUS_XMIT: + bdc->ep0_state = WAIT_FOR_SETUP; + if (bdc->test_mode) { + int ret; + + dev_dbg(bdc->dev, "test_mode:%d\n", bdc->test_mode); + ret = bdc_set_test_mode(bdc); + if (ret < 0) { + dev_err(bdc->dev, "Err in setting Test mode\n"); + return; + } + bdc->test_mode = 0; + } + break; + case STATUS_PENDING: + bdc_xsf_ep0_status_start(bdc, sreport); + break; + + default: + dev_err(bdc->dev, + "Unknown ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + } +} + +/* xfr completion status report handler */ +void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct bdc_ep *ep; + u32 sr_status; + u8 ep_num; + + ep_num = (le32_to_cpu(sreport->offset[3])>>4) & 0x1f; + ep = bdc->bdc_ep_array[ep_num]; + if (!ep || !(ep->flags & BDC_EP_ENABLED)) { + dev_err(bdc->dev, "xsf for ep not enabled\n"); + return; + } + /* + * check if this transfer is after link went from U3->U0 due + * to remote wakeup + */ + if (bdc->devstatus & FUNC_WAKE_ISSUED) { + bdc->devstatus &= ~(FUNC_WAKE_ISSUED); + dev_dbg(bdc->dev, "%s clearing FUNC_WAKE_ISSUED flag\n", + __func__); + } + sr_status = XSF_STS(le32_to_cpu(sreport->offset[3])); + dev_dbg_ratelimited(bdc->dev, "%s sr_status=%d ep:%s\n", + __func__, sr_status, ep->name); + + switch (sr_status) { + case XSF_SUCC: + case XSF_SHORT: + handle_xsr_succ_status(bdc, ep, sreport); + if (ep_num == 1) + ep0_xsf_complete(bdc, sreport); + break; + + case XSF_SETUP_RECV: + case XSF_DATA_START: + case XSF_STATUS_START: + if (ep_num != 1) { + dev_err(bdc->dev, + "ep0 related packets on non ep0 endpoint"); + return; + } + bdc->sr_xsf_ep0[sr_status - XSF_SETUP_RECV](bdc, sreport); + break; + + case XSF_BABB: + if (ep_num == 1) { + dev_dbg(bdc->dev, "Babble on ep0 zlp_need:%d\n", + bdc->zlp_needed); + /* + * If the last completed transfer had wLength >Data Len, + * and Len is multiple of MaxPacket,then queue ZLP + */ + if (bdc->zlp_needed) { + /* queue 0 length bd */ + ep0_queue_zlp(bdc); + return; + } + } + dev_warn(bdc->dev, "Babble on ep not handled\n"); + break; + default: + dev_warn(bdc->dev, "sr status not handled:%x\n", sr_status); + break; + } +} + +static int bdc_gadget_ep_queue(struct usb_ep *_ep, + struct usb_request *_req, gfp_t gfp_flags) +{ + struct bdc_req *req; + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !_ep->desc) + return -ESHUTDOWN; + + if (!_req || !_req->complete || !_req->buf) + return -EINVAL; + + ep = to_bdc_ep(_ep); + req = to_bdc_req(_req); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%p req:%p\n", __func__, ep, req); + dev_dbg(bdc->dev, "queuing request %p to %s length %d zero:%d\n", + _req, ep->name, _req->length, _req->zero); + + if (!ep->usb_ep.desc) { + dev_warn(bdc->dev, + "trying to queue req %p to disabled %s\n", + _req, ep->name); + return -ESHUTDOWN; + } + + if (_req->length > MAX_XFR_LEN) { + dev_warn(bdc->dev, + "req length > supported MAX:%d requested:%d\n", + MAX_XFR_LEN, _req->length); + return -EOPNOTSUPP; + } + spin_lock_irqsave(&bdc->lock, flags); + if (ep == bdc->bdc_ep_array[1]) + ret = ep0_queue(ep, req); + else + ret = ep_queue(ep, req); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_dequeue(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct bdc_req *req; + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !_req) + return -EINVAL; + + ep = to_bdc_ep(_ep); + req = to_bdc_req(_req); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req); + bdc_dbg_bd_list(bdc, ep); + spin_lock_irqsave(&bdc->lock, flags); + /* make sure it's still queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->usb_req == _req) + break; + } + if (&req->usb_req != _req) { + spin_unlock_irqrestore(&bdc->lock, flags); + dev_err(bdc->dev, "usb_req !=req n"); + return -EINVAL; + } + ret = ep_dequeue(ep, req); + if (ret) { + ret = -EOPNOTSUPP; + goto err; + } + bdc_req_complete(ep, req, -ECONNRESET); + +err: + bdc_dbg_bd_list(bdc, ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_set_halt(struct usb_ep *_ep, int value) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value); + spin_lock_irqsave(&bdc->lock, flags); + if (usb_endpoint_xfer_isoc(ep->usb_ep.desc)) + ret = -EINVAL; + else if (!list_empty(&ep->queue)) + ret = -EAGAIN; + else + ret = ep_set_halt(ep, value); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static struct usb_request *bdc_gadget_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct bdc_req *req; + struct bdc_ep *ep; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + ep = to_bdc_ep(_ep); + req->ep = ep; + req->epnum = ep->ep_num; + req->usb_req.dma = DMA_ADDR_INVALID; + dev_dbg(ep->bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req); + + return &req->usb_req; +} + +static void bdc_gadget_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct bdc_req *req; + + req = to_bdc_req(_req); + kfree(req); +} + +/* endpoint operations */ + +/* configure endpoint and also allocate resources */ +static int bdc_gadget_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("bdc_gadget_ep_enable invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + pr_debug("bdc_gadget_ep_enable missing wMaxPacketSize\n"); + return -EINVAL; + } + + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + + /* Sanity check, upper layer will not send enable for ep0 */ + if (ep == bdc->bdc_ep_array[1]) + return -EINVAL; + + if (!bdc->gadget_driver + || bdc->gadget.speed == USB_SPEED_UNKNOWN) { + return -ESHUTDOWN; + } + + dev_dbg(bdc->dev, "%s Enabling %s\n", __func__, ep->name); + spin_lock_irqsave(&bdc->lock, flags); + ep->desc = desc; + ep->comp_desc = _ep->comp_desc; + ret = bdc_ep_enable(ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_disable(struct usb_ep *_ep) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep) { + pr_debug("bdc: invalid parameters\n"); + return -EINVAL; + } + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + + /* Upper layer will not call this for ep0, but do a sanity check */ + if (ep == bdc->bdc_ep_array[1]) { + dev_warn(bdc->dev, "%s called for ep0\n", __func__); + return -EINVAL; + } + dev_dbg(bdc->dev, + "%s() ep:%s ep->flags:%08x\n", + __func__, ep->name, ep->flags); + + if (!(ep->flags & BDC_EP_ENABLED)) { + dev_warn(bdc->dev, "%s is already disabled\n", ep->name); + return 0; + } + spin_lock_irqsave(&bdc->lock, flags); + ret = bdc_ep_disable(ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static const struct usb_ep_ops bdc_gadget_ep_ops = { + .enable = bdc_gadget_ep_enable, + .disable = bdc_gadget_ep_disable, + .alloc_request = bdc_gadget_alloc_request, + .free_request = bdc_gadget_free_request, + .queue = bdc_gadget_ep_queue, + .dequeue = bdc_gadget_ep_dequeue, + .set_halt = bdc_gadget_ep_set_halt +}; + +/* dir = 1 is IN */ +static int init_ep(struct bdc *bdc, u32 epnum, u32 dir) +{ + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s epnum=%d dir=%d\n", __func__, epnum, dir); + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep->bdc = bdc; + ep->dir = dir; + + /* ep->ep_num is the index inside bdc_ep */ + if (epnum == 1) { + ep->ep_num = 1; + bdc->bdc_ep_array[ep->ep_num] = ep; + snprintf(ep->name, sizeof(ep->name), "ep%d", epnum - 1); + usb_ep_set_maxpacket_limit(&ep->usb_ep, EP0_MAX_PKT_SIZE); + ep->comp_desc = NULL; + bdc->gadget.ep0 = &ep->usb_ep; + } else { + if (dir) + ep->ep_num = epnum * 2 - 1; + else + ep->ep_num = epnum * 2 - 2; + + bdc->bdc_ep_array[ep->ep_num] = ep; + snprintf(ep->name, sizeof(ep->name), "ep%d%s", epnum - 1, + dir & 1 ? "in" : "out"); + + usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024); + ep->usb_ep.max_streams = 0; + list_add_tail(&ep->usb_ep.ep_list, &bdc->gadget.ep_list); + } + ep->usb_ep.ops = &bdc_gadget_ep_ops; + ep->usb_ep.name = ep->name; + ep->flags = 0; + ep->ignore_next_sr = false; + dev_dbg(bdc->dev, "ep=%p ep->usb_ep.name=%s epnum=%d ep->epnum=%d\n", + ep, ep->usb_ep.name, epnum, ep->ep_num); + + INIT_LIST_HEAD(&ep->queue); + + return 0; +} + +/* Init all ep */ +int bdc_init_ep(struct bdc *bdc) +{ + u8 epnum; + int ret; + + dev_dbg(bdc->dev, "%s()\n", __func__); + INIT_LIST_HEAD(&bdc->gadget.ep_list); + /* init ep0 */ + ret = init_ep(bdc, 1, 0); + if (ret) { + dev_err(bdc->dev, "init ep ep0 fail %d\n", ret); + return ret; + } + + for (epnum = 2; epnum <= bdc->num_eps / 2; epnum++) { + /* OUT */ + ret = init_ep(bdc, epnum, 0); + if (ret) { + dev_err(bdc->dev, + "init ep failed for:%d error: %d\n", + epnum, ret); + return ret; + } + + /* IN */ + ret = init_ep(bdc, epnum, 1); + if (ret) { + dev_err(bdc->dev, + "init ep failed for:%d error: %d\n", + epnum, ret); + return ret; + } + } + + return 0; +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.h b/drivers/usb/gadget/udc/bdc/bdc_ep.h new file mode 100644 index 0000000..8a6b36c --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.h @@ -0,0 +1,22 @@ +/* + * bdc_ep.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __LINUX_BDC_EP_H__ +#define __LINUX_BDC_EP_H__ + +int bdc_init_ep(struct bdc *); +int bdc_ep_disable(struct bdc_ep *); +int bdc_ep_enable(struct bdc_ep *); +void bdc_free_ep(struct bdc *); + +#endif /* __LINUX_BDC_EP_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_pci.c b/drivers/usb/gadget/udc/bdc/bdc_pci.c new file mode 100644 index 0000000..0296884 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c @@ -0,0 +1,132 @@ +/* + * bdc_pci.c - BRCM BDC USB3.0 device controller PCI interface file. + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/platform_device.h> + +#include "bdc.h" + +#define BDC_PCI_PID 0x1570 + +struct bdc_pci { + struct device *dev; + struct platform_device *bdc; +}; + +static int bdc_setup_msi(struct pci_dev *pci) +{ + int ret; + + ret = pci_enable_msi(pci); + if (ret) { + pr_err("failed to allocate MSI entry\n"); + return ret; + } + + return ret; +} + +static int bdc_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) +{ + struct resource res[2]; + struct platform_device *bdc; + struct bdc_pci *glue; + int ret = -ENOMEM; + + glue = devm_kzalloc(&pci->dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->dev = &pci->dev; + ret = pci_enable_device(pci); + if (ret) { + dev_err(&pci->dev, "failed to enable pci device\n"); + return -ENODEV; + } + pci_set_master(pci); + + bdc = platform_device_alloc(BRCM_BDC_NAME, PLATFORM_DEVID_AUTO); + if (!bdc) + return -ENOMEM; + + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); + bdc_setup_msi(pci); + + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = BRCM_BDC_NAME; + res[0].flags = IORESOURCE_MEM; + + res[1].start = pci->irq; + res[1].name = BRCM_BDC_NAME; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(bdc, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(&pci->dev, + "couldn't add resources to bdc device\n"); + return ret; + } + + pci_set_drvdata(pci, glue); + + dma_set_coherent_mask(&bdc->dev, pci->dev.coherent_dma_mask); + + bdc->dev.dma_mask = pci->dev.dma_mask; + bdc->dev.dma_parms = pci->dev.dma_parms; + bdc->dev.parent = &pci->dev; + glue->bdc = bdc; + + ret = platform_device_add(bdc); + if (ret) { + dev_err(&pci->dev, "failed to register bdc device\n"); + platform_device_put(bdc); + return ret; + } + + return 0; +} + +static void bdc_pci_remove(struct pci_dev *pci) +{ + struct bdc_pci *glue = pci_get_drvdata(pci); + + platform_device_unregister(glue->bdc); + pci_disable_msi(pci); +} + +static struct pci_device_id bdc_pci_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, BDC_PCI_PID), }, + {} /* Terminating Entry */ +}; + +MODULE_DEVICE_TABLE(pci, bdc_pci_id_table); + +static struct pci_driver bdc_pci_driver = { + .name = "bdc-pci", + .id_table = bdc_pci_id_table, + .probe = bdc_pci_probe, + .remove = bdc_pci_remove, +}; + +MODULE_AUTHOR("Ashwini Pahuja <ashwini.linux@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("BRCM BDC USB3 PCI Glue layer"); +module_pci_driver(bdc_pci_driver); diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c new file mode 100644 index 0000000..3700ce7 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c @@ -0,0 +1,587 @@ +/* + * bdc_udc.c - BRCM BDC USB3.0 device controller gagdet ops + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/gadget/udc/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <asm/unaligned.h> +#include <linux/platform_device.h> + +#include "bdc.h" +#include "bdc_ep.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +static const struct usb_gadget_ops bdc_gadget_ops; + +static const char * const conn_speed_str[] = { + "Not connected", + "Full Speed", + "Low Speed", + "High Speed", + "Super Speed", +}; + +/* EP0 initial descripror */ +static struct usb_endpoint_descriptor bdc_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .bEndpointAddress = 0, + .wMaxPacketSize = cpu_to_le16(EP0_MAX_PKT_SIZE), +}; + +/* Advance the srr dqp maintained by SW */ +static void srr_dqp_index_advc(struct bdc *bdc, u32 srr_num) +{ + struct srr *srr; + + srr = &bdc->srr; + dev_dbg_ratelimited(bdc->dev, "srr->dqp_index:%d\n", srr->dqp_index); + srr->dqp_index++; + /* rollback to 0 if we are past the last */ + if (srr->dqp_index == NUM_SR_ENTRIES) + srr->dqp_index = 0; +} + +/* connect sr */ +static void bdc_uspc_connected(struct bdc *bdc) +{ + u32 speed, temp; + u32 usppms; + int ret; + + temp = bdc_readl(bdc->regs, BDC_USPC); + speed = BDC_PSP(temp); + dev_dbg(bdc->dev, "%s speed=%x\n", __func__, speed); + switch (speed) { + case BDC_SPEED_SS: + bdc_gadget_ep0_desc.wMaxPacketSize = + cpu_to_le16(EP0_MAX_PKT_SIZE); + bdc->gadget.ep0->maxpacket = EP0_MAX_PKT_SIZE; + bdc->gadget.speed = USB_SPEED_SUPER; + /* Enable U1T in SS mode */ + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + usppms &= ~BDC_U1T(0xff); + usppms |= BDC_U1T(U1_TIMEOUT); + usppms |= BDC_PORT_W1S; + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case BDC_SPEED_HS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + bdc->gadget.ep0->maxpacket = 64; + bdc->gadget.speed = USB_SPEED_HIGH; + break; + + case BDC_SPEED_FS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + bdc->gadget.ep0->maxpacket = 64; + bdc->gadget.speed = USB_SPEED_FULL; + break; + + case BDC_SPEED_LS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); + bdc->gadget.ep0->maxpacket = 8; + bdc->gadget.speed = USB_SPEED_LOW; + break; + default: + dev_err(bdc->dev, "UNDEFINED SPEED\n"); + return; + } + dev_dbg(bdc->dev, "connected at %s\n", conn_speed_str[speed]); + /* Now we know the speed, configure ep0 */ + bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc; + ret = bdc_config_ep(bdc, bdc->bdc_ep_array[1]); + if (ret) + dev_err(bdc->dev, "EP0 config failed\n"); + bdc->bdc_ep_array[1]->usb_ep.desc = &bdc_gadget_ep0_desc; + bdc->bdc_ep_array[1]->flags |= BDC_EP_ENABLED; + usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT); +} + +/* device got disconnected */ +static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit) +{ + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s\n", __func__); + /* + * Only stop ep0 from here, rest of the endpoints will be disabled + * from gadget_disconnect + */ + ep = bdc->bdc_ep_array[1]; + if (ep && (ep->flags & BDC_EP_ENABLED)) + /* if enabled then stop and remove requests */ + bdc_ep_disable(ep); + + if (bdc->gadget_driver && bdc->gadget_driver->disconnect) { + spin_unlock(&bdc->lock); + bdc->gadget_driver->disconnect(&bdc->gadget); + spin_lock(&bdc->lock); + } + /* Set Unknown speed */ + bdc->gadget.speed = USB_SPEED_UNKNOWN; + bdc->devstatus &= DEVSTATUS_CLEAR; + bdc->delayed_status = false; + bdc->reinit = reinit; + bdc->test_mode = false; +} + +/* TNotify wkaeup timer */ +static void bdc_func_wake_timer(struct work_struct *work) +{ + struct bdc *bdc = container_of(work, struct bdc, func_wake_notify.work); + unsigned long flags; + + dev_dbg(bdc->dev, "%s\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + /* + * Check if host has started transferring on endpoints + * FUNC_WAKE_ISSUED is cleared when transfer has started after resume + */ + if (bdc->devstatus & FUNC_WAKE_ISSUED) { + dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n"); + /* flag is still set, so again send func wake */ + bdc_function_wake_fh(bdc, 0); + schedule_delayed_work(&bdc->func_wake_notify, + msecs_to_jiffies(BDC_TNOTIFY)); + } + spin_unlock_irqrestore(&bdc->lock, flags); +} + +/* handler for Link state change condition */ +static void handle_link_state_change(struct bdc *bdc, u32 uspc) +{ + u32 link_state; + + dev_dbg(bdc->dev, "Link state change"); + link_state = BDC_PST(uspc); + switch (link_state) { + case BDC_LINK_STATE_U3: + if ((bdc->gadget.speed != USB_SPEED_UNKNOWN) && + bdc->gadget_driver->suspend) { + dev_dbg(bdc->dev, "Entered Suspend mode\n"); + spin_unlock(&bdc->lock); + bdc->devstatus |= DEVICE_SUSPENDED; + bdc->gadget_driver->suspend(&bdc->gadget); + spin_lock(&bdc->lock); + } + break; + case BDC_LINK_STATE_U0: + if (bdc->devstatus & REMOTE_WAKEUP_ISSUED) { + bdc->devstatus &= ~REMOTE_WAKEUP_ISSUED; + if (bdc->gadget.speed == USB_SPEED_SUPER) { + bdc_function_wake_fh(bdc, 0); + bdc->devstatus |= FUNC_WAKE_ISSUED; + /* + * Start a Notification timer and check if the + * Host transferred anything on any of the EPs, + * if not then send function wake again every + * TNotification secs until host initiates + * transfer to BDC, USB3 spec Table 8.13 + */ + schedule_delayed_work( + &bdc->func_wake_notify, + msecs_to_jiffies(BDC_TNOTIFY)); + dev_dbg(bdc->dev, "sched func_wake_notify\n"); + } + } + break; + + case BDC_LINK_STATE_RESUME: + dev_dbg(bdc->dev, "Resumed from Suspend\n"); + if (bdc->devstatus & DEVICE_SUSPENDED) { + bdc->gadget_driver->resume(&bdc->gadget); + bdc->devstatus &= ~DEVICE_SUSPENDED; + } + break; + default: + dev_dbg(bdc->dev, "link state:%d\n", link_state); + } +} + +/* something changes on upstream port, handle it here */ +void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport) +{ + u32 clear_flags = 0; + u32 uspc; + bool connected = false; + bool disconn = false; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + dev_dbg(bdc->dev, "%s uspc=0x%08x\n", __func__, uspc); + + /* Port connect changed */ + if (uspc & BDC_PCC) { + /* Vbus not present, and not connected to Downstream port */ + if ((uspc & BDC_VBC) && !(uspc & BDC_VBS) && !(uspc & BDC_PCS)) + disconn = true; + else if ((uspc & BDC_PCS) && !BDC_PST(uspc)) + connected = true; + } + + /* Change in VBus and VBus is present */ + if ((uspc & BDC_VBC) && (uspc & BDC_VBS)) { + if (bdc->pullup) { + dev_dbg(bdc->dev, "Do a softconnect\n"); + /* Attached state, do a softconnect */ + bdc_softconn(bdc); + usb_gadget_set_state(&bdc->gadget, USB_STATE_POWERED); + } + clear_flags = BDC_VBC; + } else if ((uspc & BDC_PRS) || (uspc & BDC_PRC) || disconn) { + /* Hot reset, warm reset, 2.0 bus reset or disconn */ + dev_dbg(bdc->dev, "Port reset or disconn\n"); + bdc_uspc_disconnected(bdc, disconn); + clear_flags = BDC_PCC|BDC_PCS|BDC_PRS|BDC_PRC; + } else if ((uspc & BDC_PSC) && (uspc & BDC_PCS)) { + /* Change in Link state */ + handle_link_state_change(bdc, uspc); + clear_flags = BDC_PSC|BDC_PCS; + } + + /* + * In SS we might not have PRC bit set before connection, but in 2.0 + * the PRC bit is set before connection, so moving this condition out + * of bus reset to handle both SS/2.0 speeds. + */ + if (connected) { + /* This is the connect event for U0/L0 */ + dev_dbg(bdc->dev, "Connected\n"); + bdc_uspc_connected(bdc); + bdc->devstatus &= ~(DEVICE_SUSPENDED); + } + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc &= (~BDC_USPSC_RW); + dev_dbg(bdc->dev, "uspc=%x\n", uspc); + bdc_writel(bdc->regs, BDC_USPC, clear_flags); +} + +/* Main interrupt handler for bdc */ +static irqreturn_t bdc_udc_interrupt(int irq, void *_bdc) +{ + u32 eqp_index, dqp_index, sr_type, srr_int; + struct bdc_sr *sreport; + struct bdc *bdc = _bdc; + u32 status; + int ret; + + spin_lock(&bdc->lock); + status = bdc_readl(bdc->regs, BDC_BDCSC); + if (!(status & BDC_GIP)) { + spin_unlock(&bdc->lock); + return IRQ_NONE; + } + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + /* Check if the SRR IP bit it set? */ + if (!(srr_int & BDC_SRR_IP)) { + dev_warn(bdc->dev, "Global irq pending but SRR IP is 0\n"); + spin_unlock(&bdc->lock); + return IRQ_NONE; + } + eqp_index = BDC_SRR_EPI(srr_int); + dqp_index = BDC_SRR_DPI(srr_int); + dev_dbg(bdc->dev, + "%s eqp_index=%d dqp_index=%d srr.dqp_index=%d\n\n", + __func__, eqp_index, dqp_index, bdc->srr.dqp_index); + + /* check for ring empty condition */ + if (eqp_index == dqp_index) { + dev_dbg(bdc->dev, "SRR empty?\n"); + spin_unlock(&bdc->lock); + return IRQ_HANDLED; + } + + while (bdc->srr.dqp_index != eqp_index) { + sreport = &bdc->srr.sr_bds[bdc->srr.dqp_index]; + /* sreport is read before using it */ + rmb(); + sr_type = le32_to_cpu(sreport->offset[3]) & BD_TYPE_BITMASK; + dev_dbg_ratelimited(bdc->dev, "sr_type=%d\n", sr_type); + switch (sr_type) { + case SR_XSF: + bdc->sr_handler[0](bdc, sreport); + break; + + case SR_USPC: + bdc->sr_handler[1](bdc, sreport); + break; + default: + dev_warn(bdc->dev, "SR:%d not handled\n", sr_type); + } + /* Advance the srr dqp index */ + srr_dqp_index_advc(bdc, 0); + } + /* update the hw dequeue pointer */ + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + srr_int &= ~BDC_SRR_DPI_MASK; + srr_int &= ~(BDC_SRR_RWS|BDC_SRR_RST|BDC_SRR_ISR); + srr_int |= ((bdc->srr.dqp_index) << 16); + srr_int |= BDC_SRR_IP; + bdc_writel(bdc->regs, BDC_SRRINT(0), srr_int); + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + if (bdc->reinit) { + ret = bdc_reinit(bdc); + if (ret) + dev_err(bdc->dev, "err in bdc reinit\n"); + } + + spin_unlock(&bdc->lock); + + return IRQ_HANDLED; +} + +/* Gadget ops */ +static int bdc_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + int ret = 0; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + if (bdc->gadget_driver) { + dev_err(bdc->dev, "%s is already bound to %s\n", + bdc->gadget.name, + bdc->gadget_driver->driver.name); + ret = -EBUSY; + goto err; + } + /* + * Run the controller from here and when BDC is connected to + * Host then driver will receive a USPC SR with VBUS present + * and then driver will do a softconnect. + */ + ret = bdc_run(bdc); + if (ret) { + dev_err(bdc->dev, "%s bdc run fail\n", __func__); + goto err; + } + bdc->gadget_driver = driver; + bdc->gadget.dev.driver = &driver->driver; +err: + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_udc_stop(struct usb_gadget *gadget) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + bdc_stop(bdc); + bdc->gadget_driver = NULL; + bdc->gadget.dev.driver = NULL; + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + u32 uspc; + + dev_dbg(bdc->dev, "%s() is_on:%d\n", __func__, is_on); + if (!gadget) + return -EINVAL; + + spin_lock_irqsave(&bdc->lock, flags); + if (!is_on) { + bdc_softdisconn(bdc); + bdc->pullup = false; + } else { + /* + * For a self powered device, we need to wait till we receive + * a VBUS change and Vbus present event, then if pullup flag + * is set, then only we present the Termintation. + */ + bdc->pullup = true; + /* + * Check if BDC is already connected to Host i.e Vbus=1, + * if yes, then present TERM now, this is typical for bus + * powered devices. + */ + uspc = bdc_readl(bdc->regs, BDC_USPC); + if (uspc & BDC_VBS) + bdc_softconn(bdc); + } + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_set_selfpowered(struct usb_gadget *gadget, + int is_self) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + if (!is_self) + bdc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; + else + bdc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_wakeup(struct usb_gadget *gadget) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + u8 link_state; + u32 uspc; + int ret = 0; + + dev_dbg(bdc->dev, + "%s() bdc->devstatus=%08x\n", + __func__, bdc->devstatus); + + if (!(bdc->devstatus & REMOTE_WAKE_ENABLE)) + return -EOPNOTSUPP; + + spin_lock_irqsave(&bdc->lock, flags); + uspc = bdc_readl(bdc->regs, BDC_USPC); + link_state = BDC_PST(uspc); + dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc); + if (link_state != BDC_LINK_STATE_U3) { + dev_warn(bdc->dev, + "can't wakeup from link state %d\n", + link_state); + ret = -EINVAL; + goto out; + } + if (bdc->gadget.speed == USB_SPEED_SUPER) + bdc->devstatus |= REMOTE_WAKEUP_ISSUED; + + uspc &= ~BDC_PST_MASK; + uspc &= (~BDC_USPSC_RW); + uspc |= BDC_PST(BDC_LINK_STATE_U0); + uspc |= BDC_SWS; + bdc_writel(bdc->regs, BDC_USPC, uspc); + uspc = bdc_readl(bdc->regs, BDC_USPC); + link_state = BDC_PST(uspc); + dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc); +out: + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static const struct usb_gadget_ops bdc_gadget_ops = { + .wakeup = bdc_udc_wakeup, + .set_selfpowered = bdc_udc_set_selfpowered, + .pullup = bdc_udc_pullup, + .udc_start = bdc_udc_start, + .udc_stop = bdc_udc_stop, +}; + +/* Init the gadget interface and register the udc */ +int bdc_udc_init(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s()\n", __func__); + bdc->gadget.ops = &bdc_gadget_ops; + bdc->gadget.max_speed = USB_SPEED_SUPER; + bdc->gadget.speed = USB_SPEED_UNKNOWN; + bdc->gadget.dev.parent = bdc->dev; + + bdc->gadget.sg_supported = false; + + + bdc->gadget.name = BRCM_BDC_NAME; + ret = devm_request_irq(bdc->dev, bdc->irq, bdc_udc_interrupt, + IRQF_SHARED , BRCM_BDC_NAME, bdc); + if (ret) { + dev_err(bdc->dev, + "failed to request irq #%d %d\n", + bdc->irq, ret); + return ret; + } + + ret = bdc_init_ep(bdc); + if (ret) { + dev_err(bdc->dev, "bdc init ep fail: %d\n", ret); + return ret; + } + + ret = usb_add_gadget_udc(bdc->dev, &bdc->gadget); + if (ret) { + dev_err(bdc->dev, "failed to register udc\n"); + goto err0; + } + usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED); + bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc; + /* + * Allocate bd list for ep0 only, ep0 will be enabled on connect + * status report when the speed is known + */ + ret = bdc_ep_enable(bdc->bdc_ep_array[1]); + if (ret) { + dev_err(bdc->dev, "fail to enable %s\n", + bdc->bdc_ep_array[1]->name); + goto err1; + } + INIT_DELAYED_WORK(&bdc->func_wake_notify, bdc_func_wake_timer); + /* Enable Interrupts */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp |= BDC_GIE; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + return 0; +err1: + usb_del_gadget_udc(&bdc->gadget); +err0: + bdc_free_ep(bdc); + + return ret; +} + +void bdc_udc_exit(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s()\n", __func__); + bdc_ep_disable(bdc->bdc_ep_array[1]); + usb_del_gadget_udc(&bdc->gadget); + bdc_free_ep(bdc); +} diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 81dc595..1c69c76 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -367,19 +367,22 @@ static void set_link_state(struct dummy_hcd *dum_hcd) dum_hcd->active) dum_hcd->resuming = 0; - /* if !connected or reset */ + /* Currently !connected or in reset */ if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 || (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) { - /* - * We're connected and not reset (reset occurred now), - * and driver attached - disconnect! - */ - if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 && - (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 && - dum->driver) { + unsigned disconnect = USB_PORT_STAT_CONNECTION & + dum_hcd->old_status & (~dum_hcd->port_status); + unsigned reset = USB_PORT_STAT_RESET & + (~dum_hcd->old_status) & dum_hcd->port_status; + + /* Report reset and disconnect events to the driver */ + if (dum->driver && (disconnect || reset)) { stop_activity(dum); spin_unlock(&dum->lock); - dum->driver->disconnect(&dum->gadget); + if (reset) + usb_gadget_udc_reset(&dum->gadget, dum->driver); + else + dum->driver->disconnect(&dum->gadget); spin_lock(&dum->lock); } } else if (dum_hcd->active != dum_hcd->old_active) { @@ -851,8 +854,7 @@ static int dummy_pullup(struct usb_gadget *_gadget, int value) static int dummy_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int dummy_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int dummy_udc_stop(struct usb_gadget *g); static const struct usb_gadget_ops dummy_ops = { .get_frame = dummy_g_get_frame, @@ -908,23 +910,16 @@ static int dummy_udc_start(struct usb_gadget *g, */ dum->devstatus = 0; - dum->driver = driver; - dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n", - driver->driver.name); + return 0; } -static int dummy_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int dummy_udc_stop(struct usb_gadget *g) { struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); struct dummy *dum = dum_hcd->dum; - if (driver) - dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n", - driver->driver.name); - dum->driver = NULL; return 0; @@ -2370,7 +2365,6 @@ static void dummy_stop(struct usb_hcd *hcd) dum = hcd_to_dummy_hcd(hcd)->dum; device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs); - usb_gadget_unregister_driver(dum->driver); dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n"); } diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c index 1d31592..1ca52e11 100644 --- a/drivers/usb/gadget/udc/fotg210-udc.c +++ b/drivers/usb/gadget/udc/fotg210-udc.c @@ -1053,8 +1053,7 @@ static void fotg210_init(struct fotg210_udc *fotg210) iowrite32(value, fotg210->reg + FOTG210_DMISGR0); } -static int fotg210_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int fotg210_udc_stop(struct usb_gadget *g) { struct fotg210_udc *fotg210 = gadget_to_fotg210(g); unsigned long flags; diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index dd18ea3..d201f9a 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -1887,8 +1887,7 @@ static int qe_get_frame(struct usb_gadget *gadget) static int fsl_qe_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); -static int fsl_qe_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver); +static int fsl_qe_stop(struct usb_gadget *gadget); /* defined in usb_gadget.h */ static const struct usb_gadget_ops qe_gadget_ops = { @@ -1918,7 +1917,7 @@ static int reset_queues(struct qe_udc *udc) /* report disconnect; the driver is already quiesced */ spin_unlock(&udc->lock); - udc->driver->disconnect(&udc->gadget); + usb_gadget_udc_reset(&udc->gadget, udc->driver); spin_lock(&udc->lock); return 0; @@ -2305,13 +2304,10 @@ static int fsl_qe_start(struct usb_gadget *gadget, udc->ep0_dir = USB_DIR_OUT; spin_unlock_irqrestore(&udc->lock, flags); - dev_info(udc->dev, "%s bind to driver %s\n", udc->gadget.name, - driver->driver.name); return 0; } -static int fsl_qe_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int fsl_qe_stop(struct usb_gadget *gadget) { struct qe_udc *udc; struct qe_ep *loop_ep; @@ -2336,8 +2332,6 @@ static int fsl_qe_stop(struct usb_gadget *gadget, udc->driver = NULL; - dev_info(udc->dev, "unregistered gadget driver '%s'\r\n", - driver->driver.name); return 0; } @@ -2538,7 +2532,6 @@ static int qe_udc_probe(struct platform_device *ofdev) /* create a buf for ZLP send, need to remain zeroed */ udc->nullbuf = devm_kzalloc(&ofdev->dev, 256, GFP_KERNEL); if (udc->nullbuf == NULL) { - dev_err(udc->dev, "cannot alloc nullbuf\n"); ret = -ENOMEM; goto err3; } diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index c362079..f340181 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -1236,9 +1236,8 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on) static int fsl_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int fsl_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); -/* defined in gadget.h */ +static int fsl_udc_stop(struct usb_gadget *g); + static const struct usb_gadget_ops fsl_gadget_ops = { .get_frame = fsl_get_frame, .wakeup = fsl_wakeup, @@ -1772,7 +1771,7 @@ static void bus_resume(struct fsl_udc *udc) } /* Clear up all ep queues */ -static int reset_queues(struct fsl_udc *udc) +static int reset_queues(struct fsl_udc *udc, bool bus_reset) { u8 pipe; @@ -1781,7 +1780,10 @@ static int reset_queues(struct fsl_udc *udc) /* report disconnect; the driver is already quiesced */ spin_unlock(&udc->lock); - udc->driver->disconnect(&udc->gadget); + if (bus_reset) + usb_gadget_udc_reset(&udc->gadget, udc->driver); + else + udc->driver->disconnect(&udc->gadget); spin_lock(&udc->lock); return 0; @@ -1835,7 +1837,7 @@ static void reset_irq(struct fsl_udc *udc) udc->bus_reset = 1; /* Reset all the queues, include XD, dTD, EP queue * head and TR Queue */ - reset_queues(udc); + reset_queues(udc, true); udc->usb_state = USB_STATE_DEFAULT; } else { VDBG("Controller reset"); @@ -1844,7 +1846,7 @@ static void reset_irq(struct fsl_udc *udc) dr_controller_setup(udc); /* Reset all internal used Queues */ - reset_queues(udc); + reset_queues(udc, false); ep0_setup(udc); @@ -1975,8 +1977,7 @@ static int fsl_udc_start(struct usb_gadget *g, } /* Disconnect from gadget driver */ -static int fsl_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int fsl_udc_stop(struct usb_gadget *g) { struct fsl_ep *loop_ep; unsigned long flags; diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c index 8286df7..a1b33f5 100644 --- a/drivers/usb/gadget/udc/fusb300_udc.c +++ b/drivers/usb/gadget/udc/fusb300_udc.c @@ -1320,8 +1320,7 @@ static int fusb300_udc_start(struct usb_gadget *g, return 0; } -static int fusb300_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int fusb300_udc_stop(struct usb_gadget *g) { struct fusb300 *fusb300 = to_fusb300(g); diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c index bf9c5ef..5b9176e 100644 --- a/drivers/usb/gadget/udc/goku_udc.c +++ b/drivers/usb/gadget/udc/goku_udc.c @@ -992,8 +992,7 @@ static int goku_get_frame(struct usb_gadget *_gadget) static int goku_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int goku_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int goku_udc_stop(struct usb_gadget *g); static const struct usb_gadget_ops goku_ops = { .get_frame = goku_get_frame, @@ -1364,8 +1363,7 @@ static void stop_activity(struct goku_udc *dev) udc_enable(dev); } -static int goku_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int goku_udc_stop(struct usb_gadget *g) { struct goku_udc *dev = to_goku_udc(g); unsigned long flags; diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 1b3048a..320df9a2 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -1932,14 +1932,10 @@ static int gr_udc_start(struct usb_gadget *gadget, spin_unlock(&dev->lock); - dev_info(dev->dev, "Started with gadget driver '%s'\n", - driver->driver.name); - return 0; } -static int gr_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int gr_udc_stop(struct usb_gadget *gadget) { struct gr_udc *dev = to_gr_udc(gadget); unsigned long flags; @@ -1951,8 +1947,6 @@ static int gr_udc_stop(struct usb_gadget *gadget, spin_unlock_irqrestore(&dev->lock, flags); - dev_info(dev->dev, "Stopped\n"); - return 0; } diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index feab0ba..9765296 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -582,8 +582,7 @@ static void create_debug_file(struct lpc32xx_udc *udc) static void remove_debug_file(struct lpc32xx_udc *udc) { - if (udc->pde) - debugfs_remove(udc->pde); + debugfs_remove(udc->pde); } #else @@ -2559,7 +2558,7 @@ static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on) } static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *); -static int lpc32xx_stop(struct usb_gadget *, struct usb_gadget_driver *); +static int lpc32xx_stop(struct usb_gadget *); static const struct usb_gadget_ops lpc32xx_udc_ops = { .get_frame = lpc32xx_get_frame, @@ -2961,15 +2960,11 @@ static int lpc32xx_start(struct usb_gadget *gadget, return 0; } -static int lpc32xx_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int lpc32xx_stop(struct usb_gadget *gadget) { int i; struct lpc32xx_udc *udc = to_udc(gadget); - if (!driver || driver != udc->driver) - return -EINVAL; - for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++) disable_irq(udc->udp_irq[i]); diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c index 8985656..ef3f73d 100644 --- a/drivers/usb/gadget/udc/m66592-udc.c +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -1142,7 +1142,7 @@ static void irq_device_state(struct m66592 *m66592) m66592_write(m66592, ~M66592_DVST, M66592_INTSTS0); if (dvsq == M66592_DS_DFLT) { /* bus reset */ - m66592->driver->disconnect(&m66592->gadget); + usb_gadget_udc_reset(&m66592->gadget, m66592->driver); m66592_update_usb_speed(m66592); } if (m66592->old_dvsq == M66592_DS_CNFG && dvsq != M66592_DS_CNFG) @@ -1485,8 +1485,7 @@ static int m66592_udc_start(struct usb_gadget *g, return 0; } -static int m66592_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int m66592_udc_stop(struct usb_gadget *g) { struct m66592 *m66592 = to_m66592(g); diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c index 046a1f8..ea422ac 100644 --- a/drivers/usb/gadget/udc/mv_u3d_core.c +++ b/drivers/usb/gadget/udc/mv_u3d_core.c @@ -1266,8 +1266,7 @@ static int mv_u3d_start(struct usb_gadget *g, return 0; } -static int mv_u3d_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int mv_u3d_stop(struct usb_gadget *g) { struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget); struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev); @@ -1284,7 +1283,7 @@ static int mv_u3d_stop(struct usb_gadget *g, mv_u3d_controller_stop(u3d); /* stop all usb activities */ u3d->gadget.speed = USB_SPEED_UNKNOWN; - mv_u3d_stop_activity(u3d, driver); + mv_u3d_stop_activity(u3d, NULL); mv_u3d_disable(u3d); if (pdata->phy_deinit) diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c index 3c5db80..d4edd76 100644 --- a/drivers/usb/gadget/udc/mv_udc_core.c +++ b/drivers/usb/gadget/udc/mv_udc_core.c @@ -1223,7 +1223,7 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) } static int mv_udc_start(struct usb_gadget *, struct usb_gadget_driver *); -static int mv_udc_stop(struct usb_gadget *, struct usb_gadget_driver *); +static int mv_udc_stop(struct usb_gadget *); /* device controller usb_gadget_ops structure */ static const struct usb_gadget_ops mv_ops = { @@ -1307,6 +1307,23 @@ static void nuke(struct mv_ep *ep, int status) } } +static void gadget_reset(struct mv_udc *udc, struct usb_gadget_driver *driver) +{ + struct mv_ep *ep; + + nuke(&udc->eps[0], -ESHUTDOWN); + + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + nuke(ep, -ESHUTDOWN); + } + + /* report reset; the driver is already quiesced */ + if (driver) { + spin_unlock(&udc->lock); + usb_gadget_udc_reset(&udc->gadget, driver); + spin_lock(&udc->lock); + } +} /* stop all USB activities */ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver) { @@ -1371,8 +1388,7 @@ static int mv_udc_start(struct usb_gadget *gadget, return 0; } -static int mv_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int mv_udc_stop(struct usb_gadget *gadget) { struct mv_udc *udc; unsigned long flags; @@ -1386,7 +1402,7 @@ static int mv_udc_stop(struct usb_gadget *gadget, /* stop all usb activities */ udc->gadget.speed = USB_SPEED_UNKNOWN; - stop_activity(udc, driver); + stop_activity(udc, NULL); mv_udc_disable(udc); spin_unlock_irqrestore(&udc->lock, flags); @@ -1882,7 +1898,7 @@ static void irq_process_reset(struct mv_udc *udc) dev_info(&udc->dev->dev, "usb bus reset\n"); udc->usb_state = USB_STATE_DEFAULT; /* reset all the queues, stop all USB activities */ - stop_activity(udc, udc->driver); + gadget_reset(udc, udc->driver); } else { dev_info(&udc->dev->dev, "USB reset portsc 0x%x\n", readl(&udc->op_regs->portsc)); @@ -2107,10 +2123,8 @@ static int mv_udc_probe(struct platform_device *pdev) } udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); - if (udc == NULL) { - dev_err(&pdev->dev, "failed to allocate memory for udc\n"); + if (udc == NULL) return -ENOMEM; - } udc->done = &release_done; udc->pdata = dev_get_platdata(&pdev->dev); @@ -2207,7 +2221,6 @@ static int mv_udc_probe(struct platform_device *pdev) size = udc->max_eps * sizeof(struct mv_ep) *2; udc->eps = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (udc->eps == NULL) { - dev_err(&pdev->dev, "allocate ep memory failed\n"); retval = -ENOMEM; goto err_destroy_dma; } @@ -2216,7 +2229,6 @@ static int mv_udc_probe(struct platform_device *pdev) udc->status_req = devm_kzalloc(&pdev->dev, sizeof(struct mv_req), GFP_KERNEL); if (!udc->status_req) { - dev_err(&pdev->dev, "allocate status_req memory failed\n"); retval = -ENOMEM; goto err_destroy_dma; } diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index 84d7162..3a90856 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -1169,8 +1169,7 @@ net2272_pullup(struct usb_gadget *_gadget, int is_on) static int net2272_start(struct usb_gadget *_gadget, struct usb_gadget_driver *driver); -static int net2272_stop(struct usb_gadget *_gadget, - struct usb_gadget_driver *driver); +static int net2272_stop(struct usb_gadget *_gadget); static const struct usb_gadget_ops net2272_ops = { .get_frame = net2272_get_frame, @@ -1471,8 +1470,6 @@ static int net2272_start(struct usb_gadget *_gadget, */ net2272_ep0_start(dev); - dev_dbg(dev->dev, "%s ready\n", driver->driver.name); - return 0; } @@ -1502,8 +1499,7 @@ stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver) net2272_usb_reinit(dev); } -static int net2272_stop(struct usb_gadget *_gadget, - struct usb_gadget_driver *driver) +static int net2272_stop(struct usb_gadget *_gadget) { struct net2272 *dev; unsigned long flags; @@ -1511,12 +1507,11 @@ static int net2272_stop(struct usb_gadget *_gadget, dev = container_of(_gadget, struct net2272, gadget); spin_lock_irqsave(&dev->lock, flags); - stop_activity(dev, driver); + stop_activity(dev, NULL); spin_unlock_irqrestore(&dev->lock, flags); dev->driver = NULL; - dev_dbg(dev->dev, "unregistered driver '%s'\n", driver->driver.name); return 0; } @@ -1987,17 +1982,42 @@ net2272_handle_stat1_irqs(struct net2272 *dev, u8 stat) mask = (1 << USB_HIGH_SPEED) | (1 << USB_FULL_SPEED); if (stat & tmp) { + bool reset = false; + bool disconnect = false; + + /* + * Ignore disconnects and resets if the speed hasn't been set. + * VBUS can bounce and there's always an initial reset. + */ net2272_write(dev, IRQSTAT1, tmp); - if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && - ((net2272_read(dev, USBCTL1) & mask) == 0)) - || ((net2272_read(dev, USBCTL1) & (1 << VBUS_PIN)) - == 0)) - && (dev->gadget.speed != USB_SPEED_UNKNOWN)) { - dev_dbg(dev->dev, "disconnect %s\n", - dev->driver->driver.name); - stop_activity(dev, dev->driver); - net2272_ep0_start(dev); - return; + if (dev->gadget.speed != USB_SPEED_UNKNOWN) { + if ((stat & (1 << VBUS_INTERRUPT)) && + (net2272_read(dev, USBCTL1) & + (1 << VBUS_PIN)) == 0) { + disconnect = true; + dev_dbg(dev->dev, "disconnect %s\n", + dev->driver->driver.name); + } else if ((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && + (net2272_read(dev, USBCTL1) & mask) + == 0) { + reset = true; + dev_dbg(dev->dev, "reset %s\n", + dev->driver->driver.name); + } + + if (disconnect || reset) { + stop_activity(dev, dev->driver); + net2272_ep0_start(dev); + spin_unlock(&dev->lock); + if (reset) + usb_gadget_udc_reset + (&dev->gadget, dev->driver); + else + (dev->driver->disconnect) + (&dev->gadget); + spin_lock(&dev->lock); + return; + } } stat &= ~tmp; @@ -2200,18 +2220,8 @@ static void net2272_remove(struct net2272 *dev) { usb_del_gadget_udc(&dev->gadget); - - /* start with the driver above us */ - if (dev->driver) { - /* should have been done already by driver model core */ - dev_warn(dev->dev, "pci remove, driver '%s' is still registered\n", - dev->driver->driver.name); - usb_gadget_unregister_driver(dev->driver); - } - free_irq(dev->irq, dev); iounmap(dev->base_addr); - device_remove_file(dev->dev, &dev_attr_registers); dev_info(dev->dev, "unbind\n"); diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index 8d13337..d6411e0 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -1118,10 +1118,10 @@ static void scan_dma_completions(struct net2280_ep *ep) break; } else if (!ep->is_in && (req->req.length % ep->ep.maxpacket) != 0) { - tmp = readl(&ep->regs->ep_stat); if (ep->dev->quirks & PLX_SUPERSPEED) return dma_done(ep, req, tmp, 0); + tmp = readl(&ep->regs->ep_stat); /* AVOID TROUBLE HERE by not issuing short reads from * your gadget driver. That helps avoids errata 0121, * 0122, and 0124; not all cases trigger the warning. @@ -1548,8 +1548,7 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on) static int net2280_start(struct usb_gadget *_gadget, struct usb_gadget_driver *driver); -static int net2280_stop(struct usb_gadget *_gadget, - struct usb_gadget_driver *driver); +static int net2280_stop(struct usb_gadget *_gadget); static const struct usb_gadget_ops net2280_ops = { .get_frame = net2280_get_frame, @@ -2397,11 +2396,6 @@ static int net2280_start(struct usb_gadget *_gadget, ep0_start(dev); - ep_dbg(dev, "%s ready, usbctl %08x stdrsp %08x\n", - driver->driver.name, - readl(&dev->usb->usbctl), - readl(&dev->usb->stdrsp)); - /* pci writes may still be posted */ return 0; @@ -2437,8 +2431,7 @@ static void stop_activity(struct net2280 *dev, struct usb_gadget_driver *driver) usb_reinit(dev); } -static int net2280_stop(struct usb_gadget *_gadget, - struct usb_gadget_driver *driver) +static int net2280_stop(struct usb_gadget *_gadget) { struct net2280 *dev; unsigned long flags; @@ -2446,11 +2439,9 @@ static int net2280_stop(struct usb_gadget *_gadget, dev = container_of(_gadget, struct net2280, gadget); spin_lock_irqsave(&dev->lock, flags); - stop_activity(dev, driver); + stop_activity(dev, NULL); spin_unlock_irqrestore(&dev->lock, flags); - dev->driver = NULL; - net2280_led_active(dev, 0); /* Disable full-speed test mode */ @@ -2460,8 +2451,7 @@ static int net2280_stop(struct usb_gadget *_gadget, device_remove_file(&dev->pdev->dev, &dev_attr_function); device_remove_file(&dev->pdev->dev, &dev_attr_queues); - ep_dbg(dev, "unregistered driver '%s'\n", - driver ? driver->driver.name : ""); + dev->driver = NULL; return 0; } @@ -3318,17 +3308,42 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat) * only indicates a change in the reset state). */ if (stat & tmp) { + bool reset = false; + bool disconnect = false; + + /* + * Ignore disconnects and resets if the speed hasn't been set. + * VBUS can bounce and there's always an initial reset. + */ writel(tmp, &dev->regs->irqstat1); - if ((((stat & BIT(ROOT_PORT_RESET_INTERRUPT)) && - ((readl(&dev->usb->usbstat) & mask) == 0)) || - ((readl(&dev->usb->usbctl) & - BIT(VBUS_PIN)) == 0)) && - (dev->gadget.speed != USB_SPEED_UNKNOWN)) { - ep_dbg(dev, "disconnect %s\n", - dev->driver->driver.name); - stop_activity(dev, dev->driver); - ep0_start(dev); - return; + if (dev->gadget.speed != USB_SPEED_UNKNOWN) { + if ((stat & BIT(VBUS_INTERRUPT)) && + (readl(&dev->usb->usbctl) & + BIT(VBUS_PIN)) == 0) { + disconnect = true; + ep_dbg(dev, "disconnect %s\n", + dev->driver->driver.name); + } else if ((stat & BIT(ROOT_PORT_RESET_INTERRUPT)) && + (readl(&dev->usb->usbstat) & mask) + == 0) { + reset = true; + ep_dbg(dev, "reset %s\n", + dev->driver->driver.name); + } + + if (disconnect || reset) { + stop_activity(dev, dev->driver); + ep0_start(dev); + spin_unlock(&dev->lock); + if (reset) + usb_gadget_udc_reset + (&dev->gadget, dev->driver); + else + (dev->driver->disconnect) + (&dev->gadget); + spin_lock(&dev->lock); + return; + } } stat &= ~tmp; diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index dcdfea4..534b85c 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -1311,8 +1311,7 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on) static int omap_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int omap_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int omap_udc_stop(struct usb_gadget *g); static const struct usb_gadget_ops omap_gadget_ops = { .get_frame = omap_get_frame, @@ -2102,8 +2101,7 @@ done: return status; } -static int omap_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int omap_udc_stop(struct usb_gadget *g) { unsigned long flags; int status = -ENODEV; diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index ccbe3d4..1c7379a 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -1240,8 +1240,8 @@ static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA) static int pch_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int pch_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int pch_udc_stop(struct usb_gadget *g); + static const struct usb_gadget_ops pch_udc_ops = { .get_frame = pch_udc_pcd_get_frame, .wakeup = pch_udc_pcd_wakeup, @@ -2592,9 +2592,9 @@ static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev) /* Complete request queue */ empty_req_queue(ep); } - if (dev->driver && dev->driver->disconnect) { + if (dev->driver) { spin_unlock(&dev->lock); - dev->driver->disconnect(&dev->gadget); + usb_gadget_udc_reset(&dev->gadget, dev->driver); spin_lock(&dev->lock); } } @@ -3008,8 +3008,7 @@ static int pch_udc_start(struct usb_gadget *g, return 0; } -static int pch_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int pch_udc_stop(struct usb_gadget *g) { struct pch_udc_dev *dev = to_pch_udc(g); diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c index 42f7eeb..347a05b 100644 --- a/drivers/usb/gadget/udc/pxa25x_udc.c +++ b/drivers/usb/gadget/udc/pxa25x_udc.c @@ -998,8 +998,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) static int pxa25x_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int pxa25x_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int pxa25x_udc_stop(struct usb_gadget *g); static const struct usb_gadget_ops pxa25x_udc_ops = { .get_frame = pxa25x_udc_get_frame, @@ -1135,11 +1134,7 @@ static const struct file_operations debug_fops = { dev->debugfs_udc = debugfs_create_file(dev->gadget.name, \ S_IRUGO, NULL, dev, &debug_fops); \ } while (0) -#define remove_debug_files(dev) \ - do { \ - if (dev->debugfs_udc) \ - debugfs_remove(dev->debugfs_udc); \ - } while (0) +#define remove_debug_files(dev) debugfs_remove(dev->debugfs_udc) #else /* !CONFIG_USB_GADGET_DEBUG_FILES */ @@ -1285,6 +1280,33 @@ bind_fail: } static void +reset_gadget(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + del_timer_sync(&dev->timer); + + /* report reset; the driver is already quiesced */ + if (driver) + usb_gadget_udc_reset(&dev->gadget, driver); + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +static void stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) { int i; @@ -1311,15 +1333,14 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) udc_reinit(dev); } -static int pxa25x_udc_stop(struct usb_gadget*g, - struct usb_gadget_driver *driver) +static int pxa25x_udc_stop(struct usb_gadget*g) { struct pxa25x_udc *dev = to_pxa25x(g); local_irq_disable(); dev->pullup = 0; pullup(dev); - stop_activity(dev, driver); + stop_activity(dev, NULL); local_irq_enable(); if (!IS_ERR_OR_NULL(dev->transceiver)) @@ -1723,7 +1744,7 @@ pxa25x_udc_irq(int irq, void *_dev) /* reset driver and endpoints, * in case that's not yet done */ - stop_activity (dev, dev->driver); + reset_gadget(dev, dev->driver); } else { DBG(DBG_VERBOSE, "USB reset end\n"); diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 4868369..9b03fab 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -22,10 +22,13 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> #include <linux/prefetch.h> #include <linux/byteorder/generic.h> #include <linux/platform_data/pxa2xx_udc.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/usb.h> #include <linux/usb/ch9.h> @@ -1507,18 +1510,13 @@ static struct usb_ep_ops pxa_ep_ops = { */ static void dplus_pullup(struct pxa_udc *udc, int on) { - if (on) { - if (gpio_is_valid(udc->mach->gpio_pullup)) - gpio_set_value(udc->mach->gpio_pullup, - !udc->mach->gpio_pullup_inverted); - if (udc->mach->udc_command) - udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); - } else { - if (gpio_is_valid(udc->mach->gpio_pullup)) - gpio_set_value(udc->mach->gpio_pullup, - udc->mach->gpio_pullup_inverted); - if (udc->mach->udc_command) - udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); + if (udc->gpiod) { + gpiod_set_value(udc->gpiod, on); + } else if (udc->udc_command) { + if (on) + udc->udc_command(PXA2XX_UDC_CMD_CONNECT); + else + udc->udc_command(PXA2XX_UDC_CMD_DISCONNECT); } udc->pullup_on = on; } @@ -1609,7 +1607,7 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active) { struct pxa_udc *udc = to_gadget_udc(_gadget); - if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) + if (!udc->gpiod && !udc->udc_command) return -EOPNOTSUPP; dplus_pullup(udc, is_active); @@ -1671,8 +1669,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) static int pxa27x_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int pxa27x_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int pxa27x_udc_stop(struct usb_gadget *g); static const struct usb_gadget_ops pxa_udc_ops = { .get_frame = pxa_udc_get_frame, @@ -1701,10 +1698,10 @@ static void udc_disable(struct pxa_udc *udc) udc_writel(udc, UDCICR1, 0); udc_clear_mask_UDCCR(udc, UDCCR_UDE); - clk_disable(udc->clk); ep0_idle(udc); udc->gadget.speed = USB_SPEED_UNKNOWN; + clk_disable(udc->clk); udc->enabled = 0; } @@ -1757,16 +1754,16 @@ static void udc_enable(struct pxa_udc *udc) if (udc->enabled) return; + clk_enable(udc->clk); udc_writel(udc, UDCICR0, 0); udc_writel(udc, UDCICR1, 0); udc_clear_mask_UDCCR(udc, UDCCR_UDE); - clk_enable(udc->clk); - ep0_idle(udc); udc->gadget.speed = USB_SPEED_FULL; memset(&udc->stats, 0, sizeof(udc->stats)); + pxa_eps_setup(udc); udc_set_mask_UDCCR(udc, UDCCR_UDE); ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_ACM); udelay(2); @@ -1859,12 +1856,11 @@ static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver) * * Returns 0 if no error, -ENODEV, -EINVAL otherwise */ -static int pxa27x_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int pxa27x_udc_stop(struct usb_gadget *g) { struct pxa_udc *udc = to_pxa(g); - stop_activity(udc, driver); + stop_activity(udc, NULL); udc_disable(udc); dplus_pullup(udc, 0); @@ -2404,6 +2400,14 @@ static struct pxa_udc memory = { } }; +#if defined(CONFIG_OF) +static struct of_device_id udc_pxa_dt_ids[] = { + { .compatible = "marvell,pxa270-udc" }, + {} +}; +MODULE_DEVICE_TABLE(of, udc_pxa_dt_ids); +#endif + /** * pxa_udc_probe - probes the udc device * @_dev: platform device @@ -2416,81 +2420,77 @@ static int pxa_udc_probe(struct platform_device *pdev) struct resource *regs; struct pxa_udc *udc = &memory; int retval = 0, gpio; + struct pxa2xx_udc_mach_info *mach = dev_get_platdata(&pdev->dev); + unsigned long gpio_flags; + + if (mach) { + gpio_flags = mach->gpio_pullup_inverted ? GPIOF_ACTIVE_LOW : 0; + gpio = mach->gpio_pullup; + if (gpio_is_valid(gpio)) { + retval = devm_gpio_request_one(&pdev->dev, gpio, + gpio_flags, + "USB D+ pullup"); + if (retval) + return retval; + udc->gpiod = gpio_to_desc(mach->gpio_pullup); + } + udc->udc_command = mach->udc_command; + } else { + udc->gpiod = devm_gpiod_get(&pdev->dev, NULL); + } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) - return -ENXIO; + udc->regs = devm_ioremap_resource(&pdev->dev, regs); + if (IS_ERR(udc->regs)) + return PTR_ERR(udc->regs); udc->irq = platform_get_irq(pdev, 0); if (udc->irq < 0) return udc->irq; udc->dev = &pdev->dev; - udc->mach = dev_get_platdata(&pdev->dev); udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - gpio = udc->mach->gpio_pullup; - if (gpio_is_valid(gpio)) { - retval = gpio_request(gpio, "USB D+ pullup"); - if (retval == 0) - gpio_direction_output(gpio, - udc->mach->gpio_pullup_inverted); - } - if (retval) { - dev_err(&pdev->dev, "Couldn't request gpio %d : %d\n", - gpio, retval); - return retval; + if (IS_ERR(udc->gpiod)) { + dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n", + PTR_ERR(udc->gpiod)); + return PTR_ERR(udc->gpiod); } + if (udc->gpiod) + gpiod_direction_output(udc->gpiod, 0); + + udc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(udc->clk)) + return PTR_ERR(udc->clk); - udc->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(udc->clk)) { - retval = PTR_ERR(udc->clk); - goto err_clk; - } retval = clk_prepare(udc->clk); if (retval) - goto err_clk_prepare; - - retval = -ENOMEM; - udc->regs = ioremap(regs->start, resource_size(regs)); - if (!udc->regs) { - dev_err(&pdev->dev, "Unable to map UDC I/O memory\n"); - goto err_map; - } + return retval; udc->vbus_sensed = 0; the_controller = udc; platform_set_drvdata(pdev, udc); udc_init_data(udc); - pxa_eps_setup(udc); /* irq setup after old hardware state is cleaned up */ - retval = request_irq(udc->irq, pxa_udc_irq, - IRQF_SHARED, driver_name, udc); + retval = devm_request_irq(&pdev->dev, udc->irq, pxa_udc_irq, + IRQF_SHARED, driver_name, udc); if (retval != 0) { dev_err(udc->dev, "%s: can't get irq %i, err %d\n", driver_name, udc->irq, retval); - goto err_irq; + goto err; } retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) - goto err_add_udc; + goto err; pxa_init_debugfs(udc); - + if (should_enable_udc(udc)) + udc_enable(udc); return 0; - -err_add_udc: - free_irq(udc->irq, udc); -err_irq: - iounmap(udc->regs); -err_map: +err: clk_unprepare(udc->clk); -err_clk_prepare: - clk_put(udc->clk); - udc->clk = NULL; -err_clk: return retval; } @@ -2501,22 +2501,15 @@ err_clk: static int pxa_udc_remove(struct platform_device *_dev) { struct pxa_udc *udc = platform_get_drvdata(_dev); - int gpio = udc->mach->gpio_pullup; usb_del_gadget_udc(&udc->gadget); - usb_gadget_unregister_driver(udc->driver); - free_irq(udc->irq, udc); pxa_cleanup_debugfs(udc); - if (gpio_is_valid(gpio)) - gpio_free(gpio); usb_put_phy(udc->transceiver); udc->transceiver = NULL; the_controller = NULL; clk_unprepare(udc->clk); - clk_put(udc->clk); - iounmap(udc->regs); return 0; } @@ -2546,19 +2539,11 @@ extern void pxa27x_clear_otgph(void); */ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state) { - int i; struct pxa_udc *udc = platform_get_drvdata(_dev); struct pxa_ep *ep; ep = &udc->pxa_ep[0]; udc->udccsr0 = udc_ep_readl(ep, UDCCSR); - for (i = 1; i < NR_PXA_ENDPOINTS; i++) { - ep = &udc->pxa_ep[i]; - ep->udccsr_value = udc_ep_readl(ep, UDCCSR); - ep->udccr_value = udc_ep_readl(ep, UDCCR); - ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n", - ep->udccsr_value, ep->udccr_value); - } udc_disable(udc); udc->pullup_resume = udc->pullup_on; @@ -2576,19 +2561,11 @@ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state) */ static int pxa_udc_resume(struct platform_device *_dev) { - int i; struct pxa_udc *udc = platform_get_drvdata(_dev); struct pxa_ep *ep; ep = &udc->pxa_ep[0]; udc_ep_writel(ep, UDCCSR, udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME)); - for (i = 1; i < NR_PXA_ENDPOINTS; i++) { - ep = &udc->pxa_ep[i]; - udc_ep_writel(ep, UDCCSR, ep->udccsr_value); - udc_ep_writel(ep, UDCCR, ep->udccr_value); - ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n", - ep->udccsr_value, ep->udccr_value); - } dplus_pullup(udc, udc->pullup_resume); if (should_enable_udc(udc)) @@ -2615,6 +2592,7 @@ static struct platform_driver udc_driver = { .driver = { .name = "pxa27x-udc", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(udc_pxa_dt_ids), }, .probe = pxa_udc_probe, .remove = pxa_udc_remove, diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h index 28f2b53..11e1423 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.h +++ b/drivers/usb/gadget/udc/pxa27x_udc.h @@ -420,7 +420,8 @@ struct udc_stats { * @usb_gadget: udc gadget structure * @driver: bound gadget (zero, g_ether, g_mass_storage, ...) * @dev: device - * @mach: machine info, used to activate specific GPIO + * @udc_command: machine specific function to activate D+ pullup + * @gpiod: gpio descriptor of gpio for D+ pullup (or NULL if none) * @transceiver: external transceiver to handle vbus sense and D+ pullup * @ep0state: control endpoint state machine state * @stats: statistics on udc usage @@ -446,7 +447,8 @@ struct pxa_udc { struct usb_gadget gadget; struct usb_gadget_driver *driver; struct device *dev; - struct pxa2xx_udc_mach_info *mach; + void (*udc_command)(int); + struct gpio_desc *gpiod; struct usb_phy *transceiver; enum ep0_state ep0state; diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index f818661..06870da 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1345,7 +1345,7 @@ static void irq_device_state(struct r8a66597 *r8a66597) if (dvsq == DS_DFLT) { /* bus reset */ spin_unlock(&r8a66597->lock); - r8a66597->driver->disconnect(&r8a66597->gadget); + usb_gadget_udc_reset(&r8a66597->gadget, r8a66597->driver); spin_lock(&r8a66597->lock); r8a66597_update_usb_speed(r8a66597); } @@ -1763,8 +1763,7 @@ static int r8a66597_start(struct usb_gadget *gadget, return 0; } -static int r8a66597_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int r8a66597_stop(struct usb_gadget *gadget) { struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); unsigned long flags; @@ -1846,10 +1845,7 @@ static int r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597, res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sudmac"); r8a66597->sudmac_reg = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(r8a66597->sudmac_reg)) - return PTR_ERR(r8a66597->sudmac_reg); - - return 0; + return PTR_ERR_OR_ZERO(r8a66597->sudmac_reg); } static int r8a66597_probe(struct platform_device *pdev) diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c index dfbf557..97d3a91 100644 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ b/drivers/usb/gadget/udc/s3c-hsudc.c @@ -1172,8 +1172,6 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, } enable_irq(hsudc->irq); - dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name); - s3c_hsudc_reconfig(hsudc); pm_runtime_get_sync(hsudc->dev); @@ -1190,8 +1188,7 @@ err_supplies: return ret; } -static int s3c_hsudc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int s3c_hsudc_stop(struct usb_gadget *gadget) { struct s3c_hsudc *hsudc = to_hsudc(gadget); unsigned long flags; @@ -1199,11 +1196,7 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget, if (!hsudc) return -ENODEV; - if (!driver || driver != hsudc->driver) - return -EINVAL; - spin_lock_irqsave(&hsudc->lock, flags); - hsudc->driver = NULL; hsudc->gadget.speed = USB_SPEED_UNKNOWN; s3c_hsudc_uninit_phy(); @@ -1220,9 +1213,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget, disable_irq(hsudc->irq); regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); + hsudc->driver = NULL; - dev_info(hsudc->dev, "unregistered gadget driver '%s'\n", - driver->driver.name); return 0; } @@ -1267,10 +1259,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) hsudc = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsudc) + sizeof(struct s3c_hsudc_ep) * pd->epnum, GFP_KERNEL); - if (!hsudc) { - dev_err(dev, "cannot allocate memory\n"); + if (!hsudc) return -ENOMEM; - } platform_set_drvdata(pdev, dev); hsudc->dev = dev; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index ff423d1..2a8e36d 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -1541,8 +1541,7 @@ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) static int s3c2410_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int s3c2410_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int s3c2410_udc_stop(struct usb_gadget *g); static const struct usb_gadget_ops s3c2410_ops = { .get_frame = s3c2410_udc_get_frame, @@ -1683,8 +1682,7 @@ static int s3c2410_udc_start(struct usb_gadget *g, return 0; } -static int s3c2410_udc_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int s3c2410_udc_stop(struct usb_gadget *g) { struct s3c2410_udc *udc = to_s3c2410(g); diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index f205465..e31d574 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -174,8 +174,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_udc_reset); /** * usb_gadget_udc_start - tells usb device controller to start up - * @gadget: The gadget we want to get started - * @driver: The driver we want to bind to @gadget + * @udc: The UDC to be started * * This call is issued by the UDC Class driver when it's about * to register a gadget driver to the device controller, before @@ -186,10 +185,9 @@ EXPORT_SYMBOL_GPL(usb_gadget_udc_reset); * * Returns zero on success, else negative errno. */ -static inline int usb_gadget_udc_start(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static inline int usb_gadget_udc_start(struct usb_udc *udc) { - return gadget->ops->udc_start(gadget, driver); + return udc->gadget->ops->udc_start(udc->gadget, udc->driver); } /** @@ -204,10 +202,9 @@ static inline int usb_gadget_udc_start(struct usb_gadget *gadget, * far as powering off UDC completely and disable its data * line pullups. */ -static inline void usb_gadget_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static inline void usb_gadget_udc_stop(struct usb_udc *udc) { - gadget->ops->udc_stop(gadget, driver); + udc->gadget->ops->udc_stop(udc->gadget); } /** @@ -328,14 +325,14 @@ EXPORT_SYMBOL_GPL(usb_add_gadget_udc); static void usb_gadget_remove_driver(struct usb_udc *udc) { dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n", - udc->gadget->name); + udc->driver->function); kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); usb_gadget_disconnect(udc->gadget); udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); - usb_gadget_udc_stop(udc->gadget, NULL); + usb_gadget_udc_stop(udc); udc->driver = NULL; udc->dev.driver = NULL; @@ -395,7 +392,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri ret = driver->bind(udc->gadget, driver); if (ret) goto err1; - ret = usb_gadget_udc_start(udc->gadget, driver); + ret = usb_gadget_udc_start(udc); if (ret) { driver->unbind(udc->gadget); goto err1; @@ -414,7 +411,7 @@ err1: return ret; } -int udc_attach_driver(const char *name, struct usb_gadget_driver *driver) +int usb_udc_attach_driver(const char *name, struct usb_gadget_driver *driver) { struct usb_udc *udc = NULL; int ret = -ENODEV; @@ -438,7 +435,7 @@ out: mutex_unlock(&udc_lock); return ret; } -EXPORT_SYMBOL_GPL(udc_attach_driver); +EXPORT_SYMBOL_GPL(usb_udc_attach_driver); int usb_gadget_probe_driver(struct usb_gadget_driver *driver) { @@ -513,11 +510,12 @@ static ssize_t usb_udc_softconn_store(struct device *dev, } if (sysfs_streq(buf, "connect")) { - usb_gadget_udc_start(udc->gadget, udc->driver); + usb_gadget_udc_start(udc); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { usb_gadget_disconnect(udc->gadget); - usb_gadget_udc_stop(udc->gadget, udc->driver); + udc->driver->disconnect(udc->gadget); + usb_gadget_udc_stop(udc); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index ed27e16..1eac56f 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -1403,8 +1403,7 @@ err: * * Return: zero always */ -static int xudc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int xudc_stop(struct usb_gadget *gadget) { struct xusb_udc *udc = to_udc(gadget); unsigned long flags; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 0231606d..3e5df5a 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -183,7 +183,7 @@ static void start_hnp(struct ohci_hcd *ohci) otg_start_hnp(hcd->usb_phy->otg); local_irq_save(flags); - hcd->usb_phy->state = OTG_STATE_A_SUSPEND; + hcd->usb_phy->otg->state = OTG_STATE_A_SUSPEND; writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]); l = omap_readl(OTG_CTRL); l &= ~OTG_A_BUSREQ; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 06cc5d6..9d68372 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -58,8 +58,7 @@ config USB_MUSB_DUAL_ROLE endchoice -choice - prompt "Platform Glue Layer" +comment "Platform Glue Layer" config USB_MUSB_DAVINCI tristate "DaVinci" @@ -101,8 +100,6 @@ config USB_MUSB_JZ4740 depends on USB_MUSB_GADGET depends on USB_OTG_BLACKLIST_HUB -endchoice - config USB_MUSB_AM335X_CHILD tristate diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index a2735df..220fd4d 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -149,25 +149,25 @@ static void otg_timer(unsigned long _musb) */ devctl = musb_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_BCON: devctl &= ~MUSB_DEVCTL_SESSION; musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); } else { - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } break; case OTG_STATE_A_WAIT_VFALL: - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; musb_writel(musb->ctrl_base, CORE_INTR_SRC_SET_REG, MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT); break; @@ -176,7 +176,7 @@ static void otg_timer(unsigned long _musb) if (devctl & MUSB_DEVCTL_BDEVICE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); else - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; break; default: break; @@ -193,9 +193,9 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout) /* Never idle if active, or when VBUS timeout is not set as host */ if (musb->is_active || (musb->a_wait_bcon == 0 && - musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); del_timer(&otg_workaround); last_timer = jiffies; return; @@ -208,7 +208,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), jiffies_to_msecs(timeout - jiffies)); mod_timer(&otg_workaround, timeout); } @@ -278,27 +278,27 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) * devctl. */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; - musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&otg_workaround); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } /* NOTE: this must complete power-on within 100 ms. */ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), err ? " ERROR" : "", devctl); ret = IRQ_HANDLED; @@ -324,7 +324,7 @@ eoi: } /* Poll for ID change */ - if (musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -408,7 +408,7 @@ static int am35x_musb_exit(struct musb *musb) } /* AM35x supports only 32bit read operation */ -void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) +static void am35x_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; u32 val; @@ -438,9 +438,11 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) } static const struct musb_platform_ops am35x_ops = { + .quirks = MUSB_INDEXED_EP, .init = am35x_musb_init, .exit = am35x_musb_exit, + .read_fifo = am35x_read_fifo, .enable = am35x_musb_enable, .disable = am35x_musb_disable, diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ac4422b..a441a2d 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -33,10 +33,45 @@ struct bfin_glue { }; #define glue_to_musb(g) platform_get_drvdata(g->musb) +static u32 bfin_fifo_offset(u8 epnum) +{ + return USB_OFFSET(USB_EP0_FIFO) + (epnum * 8); +} + +static u8 bfin_readb(const void __iomem *addr, unsigned offset) +{ + return (u8)(bfin_read16(addr + offset)); +} + +static u16 bfin_readw(const void __iomem *addr, unsigned offset) +{ + return bfin_read16(addr + offset); +} + +static u32 bfin_readl(const void __iomem *addr, unsigned offset) +{ + return (u32)(bfin_read16(addr + offset)); +} + +static void bfin_writeb(void __iomem *addr, unsigned offset, u8 data) +{ + bfin_write16(addr + offset, (u16)data); +} + +static void bfin_writew(void __iomem *addr, unsigned offset, u16 data) +{ + bfin_write16(addr + offset, data); +} + +static void binf_writel(void __iomem *addr, unsigned offset, u32 data) +{ + bfin_write16(addr + offset, (u16)data); +} + /* * Load an endpoint's FIFO */ -void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) +static void bfin_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) { struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; @@ -100,7 +135,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) /* * Unload an endpoint's FIFO */ -void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) +static void bfin_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; @@ -185,8 +220,8 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci) } /* Start sampling ID pin, when plug is removed from MUSB */ - if ((musb->xceiv->state == OTG_STATE_B_IDLE - || musb->xceiv->state == OTG_STATE_A_WAIT_BCON) || + if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE + || musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) || (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) { mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); musb->a_wait_bcon = TIMER_DELAY; @@ -205,7 +240,7 @@ static void musb_conn_timer_handler(unsigned long _musb) static u8 toggle; spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_IDLE: case OTG_STATE_A_WAIT_BCON: /* Start a new session */ @@ -219,7 +254,7 @@ static void musb_conn_timer_handler(unsigned long _musb) if (!(val & MUSB_DEVCTL_BDEVICE)) { gpio_set_value(musb->config->gpio_vrsel, 1); - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; } else { gpio_set_value(musb->config->gpio_vrsel, 0); /* Ignore VBUSERROR and SUSPEND IRQ */ @@ -229,7 +264,7 @@ static void musb_conn_timer_handler(unsigned long _musb) val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR; musb_writeb(musb->mregs, MUSB_INTRUSB, val); - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; } mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY); break; @@ -245,7 +280,7 @@ static void musb_conn_timer_handler(unsigned long _musb) if (!(val & MUSB_DEVCTL_BDEVICE)) { gpio_set_value(musb->config->gpio_vrsel, 1); - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; } else { gpio_set_value(musb->config->gpio_vrsel, 0); @@ -280,13 +315,13 @@ static void musb_conn_timer_handler(unsigned long _musb) break; default: dev_dbg(musb->controller, "%s state not handled\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); break; } spin_unlock_irqrestore(&musb->lock, flags); dev_dbg(musb->controller, "state is %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } static void bfin_musb_enable(struct musb *musb) @@ -307,7 +342,7 @@ static void bfin_musb_set_vbus(struct musb *musb, int is_on) dev_dbg(musb->controller, "VBUS %s, devctl %02x " /* otg %3x conf %08x prcm %08x */ "\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), musb_readb(musb->mregs, MUSB_DEVCTL)); } @@ -433,6 +468,15 @@ static const struct musb_platform_ops bfin_ops = { .init = bfin_musb_init, .exit = bfin_musb_exit, + .readb = bfin_readb, + .writeb = bfin_writeb, + .readw = bfin_readw, + .writew = bfin_writew, + .readl = bfin_readl, + .writel = bfin_writel, + .fifo_mode = 2, + .read_fifo = bfin_read_fifo, + .write_fifo = bfin_write_fifo, .enable = bfin_musb_enable, .disable = bfin_musb_disable, @@ -456,16 +500,12 @@ static int bfin_probe(struct platform_device *pdev) int ret = -ENOMEM; glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); + if (!glue) goto err0; - } musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); - if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); + if (!musb) goto err0; - } musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &bfin_dmamask; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 058775e..9a9c82a 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -198,20 +198,20 @@ static void otg_timer(unsigned long _musb) */ devctl = musb_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_BCON: devctl &= ~MUSB_DEVCTL_SESSION; musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); } else { - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } break; @@ -226,7 +226,7 @@ static void otg_timer(unsigned long _musb) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); break; } - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG, MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT); break; @@ -248,7 +248,7 @@ static void otg_timer(unsigned long _musb) if (devctl & MUSB_DEVCTL_BDEVICE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); else - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; break; default: break; @@ -265,9 +265,9 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout) /* Never idle if active, or when VBUS timeout is not set as host */ if (musb->is_active || (musb->a_wait_bcon == 0 && - musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); del_timer(&otg_workaround); last_timer = jiffies; return; @@ -280,7 +280,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), jiffies_to_msecs(timeout - jiffies)); mod_timer(&otg_workaround, timeout); } @@ -341,26 +341,26 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) * devctl. */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; - musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&otg_workaround); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), err ? " ERROR" : "", devctl); ret = IRQ_HANDLED; @@ -375,7 +375,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0); /* Poll for ID change */ - if (musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -458,9 +458,11 @@ static int da8xx_musb_exit(struct musb *musb) } static const struct musb_platform_ops da8xx_ops = { + .quirks = MUSB_INDEXED_EP, .init = da8xx_musb_init, .exit = da8xx_musb_exit, + .fifo_mode = 2, .enable = da8xx_musb_enable, .disable = da8xx_musb_disable, diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 110b784..3c1d9b2 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -214,10 +214,10 @@ static void otg_timer(unsigned long _musb) */ devctl = musb_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "poll devctl %02x (%s)\n", devctl, - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_VFALL: /* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL * seems to mis-handle session "start" otherwise (or in our @@ -228,7 +228,7 @@ static void otg_timer(unsigned long _musb) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); break; } - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT); break; @@ -251,7 +251,7 @@ static void otg_timer(unsigned long _musb) if (devctl & MUSB_DEVCTL_BDEVICE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); else - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; break; default: break; @@ -325,20 +325,20 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) * to stop registering in devctl. */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; - musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&otg_workaround); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } @@ -348,7 +348,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) davinci_musb_source_power(musb, drvvbus, 0); dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), err ? " ERROR" : "", devctl); retval = IRQ_HANDLED; @@ -361,7 +361,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) musb_writel(tibase, DAVINCI_USB_EOI_REG, 0); /* poll for ID change */ - if (musb->xceiv->state == OTG_STATE_B_IDLE) + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); spin_unlock_irqrestore(&musb->lock, flags); @@ -520,10 +520,8 @@ static int davinci_probe(struct platform_device *pdev) int ret = -ENOMEM; glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); + if (!glue) goto err0; - } clk = devm_clk_get(&pdev->dev, "usb"); if (IS_ERR(clk)) { diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c index d118729..bb7b263 100644 --- a/drivers/usb/musb/jz4740.c +++ b/drivers/usb/musb/jz4740.c @@ -106,6 +106,8 @@ static int jz4740_musb_exit(struct musb *musb) } static const struct musb_platform_ops jz4740_musb_ops = { + .quirks = MUSB_INDEXED_EP, + .fifo_mode = 2, .init = jz4740_musb_init, .exit = jz4740_musb_exit, }; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 55ebd4b..55fe0ff 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -224,12 +224,67 @@ static struct usb_phy_io_ops musb_ulpi_access = { /*-------------------------------------------------------------------------*/ -#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN) +static u32 musb_default_fifo_offset(u8 epnum) +{ + return 0x20 + (epnum * 4); +} + +/* "flat" mapping: each endpoint has its own i/o address */ +static void musb_flat_ep_select(void __iomem *mbase, u8 epnum) +{ +} + +static u32 musb_flat_ep_offset(u8 epnum, u16 offset) +{ + return 0x100 + (0x10 * epnum) + offset; +} + +/* "indexed" mapping: INDEX register controls register bank select */ +static void musb_indexed_ep_select(void __iomem *mbase, u8 epnum) +{ + musb_writeb(mbase, MUSB_INDEX, epnum); +} + +static u32 musb_indexed_ep_offset(u8 epnum, u16 offset) +{ + return 0x10 + offset; +} + +static u8 musb_default_readb(const void __iomem *addr, unsigned offset) +{ + return __raw_readb(addr + offset); +} + +static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data) +{ + __raw_writeb(data, addr + offset); +} + +static u16 musb_default_readw(const void __iomem *addr, unsigned offset) +{ + return __raw_readw(addr + offset); +} + +static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data) +{ + __raw_writew(data, addr + offset); +} + +static u32 musb_default_readl(const void __iomem *addr, unsigned offset) +{ + return __raw_readl(addr + offset); +} + +static void musb_default_writel(void __iomem *addr, unsigned offset, u32 data) +{ + __raw_writel(data, addr + offset); +} /* * Load an endpoint's FIFO */ -void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) +static void musb_default_write_fifo(struct musb_hw_ep *hw_ep, u16 len, + const u8 *src) { struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; @@ -270,11 +325,10 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) } } -#if !defined(CONFIG_USB_MUSB_AM35X) /* * Unload an endpoint's FIFO */ -void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) +static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { struct musb *musb = hw_ep->musb; void __iomem *fifo = hw_ep->fifo; @@ -312,10 +366,40 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) ioread8_rep(fifo, dst, len); } } -#endif -#endif /* normal PIO */ +/* + * Old style IO functions + */ +u8 (*musb_readb)(const void __iomem *addr, unsigned offset); +EXPORT_SYMBOL_GPL(musb_readb); + +void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); +EXPORT_SYMBOL_GPL(musb_writeb); + +u16 (*musb_readw)(const void __iomem *addr, unsigned offset); +EXPORT_SYMBOL_GPL(musb_readw); + +void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); +EXPORT_SYMBOL_GPL(musb_writew); +u32 (*musb_readl)(const void __iomem *addr, unsigned offset); +EXPORT_SYMBOL_GPL(musb_readl); + +void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); +EXPORT_SYMBOL_GPL(musb_writel); + +/* + * New style IO functions + */ +void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) +{ + return hw_ep->musb->io.read_fifo(hw_ep, len, dst); +} + +void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) +{ + return hw_ep->musb->io.write_fifo(hw_ep, len, src); +} /*-------------------------------------------------------------------------*/ @@ -360,23 +444,23 @@ static void musb_otg_timer_func(unsigned long data) unsigned long flags; spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_B_WAIT_ACON: dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n"); musb_g_disconnect(musb); - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; musb->is_active = 0; break; case OTG_STATE_A_SUSPEND: case OTG_STATE_A_WAIT_BCON: dev_dbg(musb->controller, "HNP: %s timeout\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); musb_platform_set_vbus(musb, 0); - musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; break; default: dev_dbg(musb->controller, "HNP: Unhandled mode %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } spin_unlock_irqrestore(&musb->lock, flags); } @@ -391,19 +475,19 @@ void musb_hnp_stop(struct musb *musb) u8 reg; dev_dbg(musb->controller, "HNP: stop from %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_PERIPHERAL: musb_g_disconnect(musb); dev_dbg(musb->controller, "HNP: back to %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); break; case OTG_STATE_B_HOST: dev_dbg(musb->controller, "HNP: Disabling HR\n"); if (hcd) hcd->self.is_b_host = 0; - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; MUSB_DEV_MODE(musb); reg = musb_readb(mbase, MUSB_POWER); reg |= MUSB_POWER_SUSPENDM; @@ -412,7 +496,7 @@ void musb_hnp_stop(struct musb *musb) break; default: dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } /* @@ -423,6 +507,7 @@ void musb_hnp_stop(struct musb *musb) musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16); } +static void musb_generic_disable(struct musb *musb); /* * Interrupt Service Routine to record USB "global" interrupts. * Since these do not happen often and signify things of @@ -449,13 +534,13 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, */ if (int_usb & MUSB_INTR_RESUME) { handled = IRQ_HANDLED; - dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->state)); + dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->otg->state)); if (devctl & MUSB_DEVCTL_HM) { void __iomem *mbase = musb->mregs; u8 power; - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: /* remote wakeup? later, GetPortStatus * will stop RESUME signaling @@ -478,29 +563,26 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, | MUSB_PORT_STAT_RESUME; musb->rh_timer = jiffies + msecs_to_jiffies(20); - schedule_delayed_work( - &musb->finish_resume_work, - msecs_to_jiffies(20)); + musb->need_finish_resume = 1; - musb->xceiv->state = OTG_STATE_A_HOST; + musb->xceiv->otg->state = OTG_STATE_A_HOST; musb->is_active = 1; - musb_host_resume_root_hub(musb); break; case OTG_STATE_B_WAIT_ACON: - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; musb->is_active = 1; MUSB_DEV_MODE(musb); break; default: WARNING("bogus %s RESUME (%s)\n", "host", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } } else { - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: /* possibly DISCONNECT is upcoming */ - musb->xceiv->state = OTG_STATE_A_HOST; + musb->xceiv->otg->state = OTG_STATE_A_HOST; musb_host_resume_root_hub(musb); break; case OTG_STATE_B_WAIT_ACON: @@ -523,7 +605,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, default: WARNING("bogus %s RESUME (%s)\n", "peripheral", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } } } @@ -539,7 +621,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, } dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); /* IRQ arrives from ID pin sense or (later, if VBUS power * is removed) SRP. responses are time critical: @@ -550,7 +632,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, */ musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); musb->ep0_stage = MUSB_EP0_START; - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); musb_platform_set_vbus(musb, 1); @@ -576,7 +658,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, * REVISIT: do delays from lots of DEBUG_KERNEL checks * make trouble here, keeping VBUS < 4.4V ? */ - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_HOST: /* recovery is dicey once we've gotten past the * initial stages of enumeration, but if VBUS @@ -605,7 +687,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), devctl, ({ char *s; switch (devctl & MUSB_DEVCTL_VBUS) { @@ -630,10 +712,10 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (int_usb & MUSB_INTR_SUSPEND) { dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n", - usb_otg_state_string(musb->xceiv->state), devctl); + usb_otg_state_string(musb->xceiv->otg->state), devctl); handled = IRQ_HANDLED; - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_PERIPHERAL: /* We also come here if the cable is removed, since * this silicon doesn't report ID-no-longer-grounded. @@ -657,7 +739,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb_g_suspend(musb); musb->is_active = musb->g.b_hnp_enable; if (musb->is_active) { - musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n"); mod_timer(&musb->otg_timer, jiffies + msecs_to_jiffies( @@ -670,7 +752,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + msecs_to_jiffies(musb->a_wait_bcon)); break; case OTG_STATE_A_HOST: - musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; musb->is_active = musb->hcd->self.b_hnp_enable; break; case OTG_STATE_B_HOST: @@ -713,7 +795,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb->port1_status |= USB_PORT_STAT_LOW_SPEED; /* indicate new connection to OTG machine */ - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_B_PERIPHERAL: if (int_usb & MUSB_INTR_SUSPEND) { dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n"); @@ -725,7 +807,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, case OTG_STATE_B_WAIT_ACON: dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n"); b_host: - musb->xceiv->state = OTG_STATE_B_HOST; + musb->xceiv->otg->state = OTG_STATE_B_HOST; if (musb->hcd) musb->hcd->self.is_b_host = 1; del_timer(&musb->otg_timer); @@ -733,7 +815,7 @@ b_host: default: if ((devctl & MUSB_DEVCTL_VBUS) == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { - musb->xceiv->state = OTG_STATE_A_HOST; + musb->xceiv->otg->state = OTG_STATE_A_HOST; if (hcd) hcd->self.is_b_host = 0; } @@ -743,16 +825,16 @@ b_host: musb_host_poke_root_hub(musb); dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n", - usb_otg_state_string(musb->xceiv->state), devctl); + usb_otg_state_string(musb->xceiv->otg->state), devctl); } if (int_usb & MUSB_INTR_DISCONNECT) { dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), MUSB_MODE(musb), devctl); handled = IRQ_HANDLED; - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_HOST: case OTG_STATE_A_SUSPEND: musb_host_resume_root_hub(musb); @@ -770,7 +852,7 @@ b_host: musb_root_disconnect(musb); if (musb->hcd) musb->hcd->self.is_b_host = 0; - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; MUSB_DEV_MODE(musb); musb_g_disconnect(musb); break; @@ -786,7 +868,7 @@ b_host: break; default: WARNING("unhandled DISCONNECT transition (%s)\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); break; } } @@ -812,15 +894,15 @@ b_host: } } else { dev_dbg(musb->controller, "BUS RESET as %s\n", - usb_otg_state_string(musb->xceiv->state)); - switch (musb->xceiv->state) { + usb_otg_state_string(musb->xceiv->otg->state)); + switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: musb_g_reset(musb); /* FALLTHROUGH */ case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ /* never use invalid T(a_wait_bcon) */ dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), TA_WAIT_BCON(musb)); mod_timer(&musb->otg_timer, jiffies + msecs_to_jiffies(TA_WAIT_BCON(musb))); @@ -831,27 +913,29 @@ b_host: break; case OTG_STATE_B_WAIT_ACON: dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n", - usb_otg_state_string(musb->xceiv->state)); - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + usb_otg_state_string(musb->xceiv->otg->state)); + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; musb_g_reset(musb); break; case OTG_STATE_B_IDLE: - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; /* FALLTHROUGH */ case OTG_STATE_B_PERIPHERAL: musb_g_reset(musb); break; default: dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } } } /* handle babble condition */ - if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb)) + if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb)) { + musb_generic_disable(musb); schedule_delayed_work(&musb->recover_work, msecs_to_jiffies(100)); + } #if 0 /* REVISIT ... this would be for multiplexing periodic endpoints, or @@ -1032,21 +1116,7 @@ static void musb_shutdown(struct platform_device *pdev) * We don't currently use dynamic fifo setup capability to do anything * more than selecting one of a bunch of predefined configurations. */ -#if defined(CONFIG_USB_MUSB_TUSB6010) \ - || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) \ - || defined(CONFIG_USB_MUSB_OMAP2PLUS) \ - || defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE) \ - || defined(CONFIG_USB_MUSB_AM35X) \ - || defined(CONFIG_USB_MUSB_AM35X_MODULE) \ - || defined(CONFIG_USB_MUSB_DSPS) \ - || defined(CONFIG_USB_MUSB_DSPS_MODULE) -static ushort fifo_mode = 4; -#elif defined(CONFIG_USB_MUSB_UX500) \ - || defined(CONFIG_USB_MUSB_UX500_MODULE) -static ushort fifo_mode = 5; -#else -static ushort fifo_mode = 2; -#endif +static ushort fifo_mode; /* "modprobe ... fifo_mode=1" etc */ module_param(fifo_mode, ushort, 0); @@ -1456,20 +1526,25 @@ static int musb_core_init(u16 musb_type, struct musb *musb) for (i = 0; i < musb->nr_endpoints; i++) { struct musb_hw_ep *hw_ep = musb->endpoints + i; - hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase; -#if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE) - hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i); - hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i); - hw_ep->fifo_sync_va = - musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i); - - if (i == 0) - hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF; - else - hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2); + hw_ep->fifo = musb->io.fifo_offset(i) + mbase; +#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) + if (musb->io.quirks & MUSB_IN_TUSB) { + hw_ep->fifo_async = musb->async + 0x400 + + musb->io.fifo_offset(i); + hw_ep->fifo_sync = musb->sync + 0x400 + + musb->io.fifo_offset(i); + hw_ep->fifo_sync_va = + musb->sync_va + 0x400 + musb->io.fifo_offset(i); + + if (i == 0) + hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF; + else + hw_ep->conf = mbase + 0x400 + + (((i - 1) & 0xf) << 2); + } #endif - hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase; + hw_ep->regs = musb->io.ep_offset(i, 0) + mbase; hw_ep->target_regs = musb_read_target_reg_base(i, mbase); hw_ep->rx_reinit = 1; hw_ep->tx_reinit = 1; @@ -1630,7 +1705,7 @@ musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf) int ret = -EINVAL; spin_lock_irqsave(&musb->lock, flags); - ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->state)); + ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state)); spin_unlock_irqrestore(&musb->lock, flags); return ret; @@ -1675,7 +1750,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, spin_lock_irqsave(&musb->lock, flags); /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */ musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ; - if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON) + if (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) musb->is_active = 0; musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val)); spin_unlock_irqrestore(&musb->lock, flags); @@ -1743,8 +1818,8 @@ static void musb_irq_work(struct work_struct *data) { struct musb *musb = container_of(data, struct musb, irq_work); - if (musb->xceiv->state != musb->xceiv_old_state) { - musb->xceiv_old_state = musb->xceiv->state; + if (musb->xceiv->otg->state != musb->xceiv_old_state) { + musb->xceiv_old_state = musb->xceiv->otg->state; sysfs_notify(&musb->controller->kobj, NULL, "mode"); } } @@ -1903,6 +1978,18 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->ops = plat->platform_ops; musb->port_mode = plat->mode; + /* + * Initialize the default IO functions. At least omap2430 needs + * these early. We initialize the platform specific IO functions + * later on. + */ + musb_readb = musb_default_readb; + musb_writeb = musb_default_writeb; + musb_readw = musb_default_readw; + musb_writew = musb_default_writew; + musb_readl = musb_default_readl; + musb_writel = musb_default_writel; + /* The musb_platform_init() call: * - adjusts musb->mregs * - sets the musb->isr @@ -1924,6 +2011,57 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail2; } + if (musb->ops->quirks) + musb->io.quirks = musb->ops->quirks; + + /* At least tusb6010 has it's own offsets.. */ + if (musb->ops->ep_offset) + musb->io.ep_offset = musb->ops->ep_offset; + if (musb->ops->ep_select) + musb->io.ep_select = musb->ops->ep_select; + + /* ..and some devices use indexed offset or flat offset */ + if (musb->io.quirks & MUSB_INDEXED_EP) { + musb->io.ep_offset = musb_indexed_ep_offset; + musb->io.ep_select = musb_indexed_ep_select; + } else { + musb->io.ep_offset = musb_flat_ep_offset; + musb->io.ep_select = musb_flat_ep_select; + } + + if (musb->ops->fifo_mode) + fifo_mode = musb->ops->fifo_mode; + else + fifo_mode = 4; + + if (musb->ops->fifo_offset) + musb->io.fifo_offset = musb->ops->fifo_offset; + else + musb->io.fifo_offset = musb_default_fifo_offset; + + if (musb->ops->readb) + musb_readb = musb->ops->readb; + if (musb->ops->writeb) + musb_writeb = musb->ops->writeb; + if (musb->ops->readw) + musb_readw = musb->ops->readw; + if (musb->ops->writew) + musb_writew = musb->ops->writew; + if (musb->ops->readl) + musb_readl = musb->ops->readl; + if (musb->ops->writel) + musb_writel = musb->ops->writel; + + if (musb->ops->read_fifo) + musb->io.read_fifo = musb->ops->read_fifo; + else + musb->io.read_fifo = musb_default_read_fifo; + + if (musb->ops->write_fifo) + musb->io.write_fifo = musb->ops->write_fifo; + else + musb->io.write_fifo = musb_default_write_fifo; + if (!musb->xceiv->io_ops) { musb->xceiv->io_dev = musb->controller; musb->xceiv->io_priv = musb->mregs; @@ -1983,10 +2121,10 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (musb->xceiv->otg->default_a) { MUSB_HST_MODE(musb); - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; } else { MUSB_DEV_MODE(musb); - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; } switch (musb->port_mode) { @@ -2297,9 +2435,11 @@ static int musb_suspend(struct device *dev) return 0; } -static int musb_resume_noirq(struct device *dev) +static int musb_resume(struct device *dev) { struct musb *musb = dev_to_musb(dev); + u8 devctl; + u8 mask; /* * For static cmos like DaVinci, register values were preserved @@ -2313,6 +2453,23 @@ static int musb_resume_noirq(struct device *dev) musb_restore_context(musb); + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV; + if ((devctl & mask) != (musb->context.devctl & mask)) + musb->port1_status = 0; + if (musb->need_finish_resume) { + musb->need_finish_resume = 0; + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(20)); + } + + /* + * The USB HUB code expects the device to be in RPM_ACTIVE once it came + * out of suspend + */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); return 0; } @@ -2348,7 +2505,7 @@ static int musb_runtime_resume(struct device *dev) static const struct dev_pm_ops musb_dev_pm_ops = { .suspend = musb_suspend, - .resume_noirq = musb_resume_noirq, + .resume = musb_resume, .runtime_suspend = musb_runtime_suspend, .runtime_resume = musb_runtime_resume, }; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 414e57a..5e65958 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -124,41 +124,6 @@ enum musb_g_ep0_state { #define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */ #define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */ - -/*************************** REGISTER ACCESS ********************************/ - -/* Endpoint registers (other than dynfifo setup) can be accessed either - * directly with the "flat" model, or after setting up an index register. - */ - -#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \ - || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \ - || defined(CONFIG_ARCH_OMAP4) -/* REVISIT indexed access seemed to - * misbehave (on DaVinci) for at least peripheral IN ... - */ -#define MUSB_FLAT_REG -#endif - -/* TUSB mapping: "flat" plus ep0 special cases */ -#if defined(CONFIG_USB_MUSB_TUSB6010) || \ - defined(CONFIG_USB_MUSB_TUSB6010_MODULE) -#define musb_ep_select(_mbase, _epnum) \ - musb_writeb((_mbase), MUSB_INDEX, (_epnum)) -#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET - -/* "flat" mapping: each endpoint has its own i/o address */ -#elif defined(MUSB_FLAT_REG) -#define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum))) -#define MUSB_EP_OFFSET MUSB_FLAT_OFFSET - -/* "indexed" mapping: INDEX register controls register bank select */ -#else -#define musb_ep_select(_mbase, _epnum) \ - musb_writeb((_mbase), MUSB_INDEX, (_epnum)) -#define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET -#endif - /****************************** FUNCTIONS ********************************/ #define MUSB_HST_MODE(_musb)\ @@ -173,8 +138,25 @@ enum musb_g_ep0_state { /******************************** TYPES *************************************/ +struct musb_io; + /** * struct musb_platform_ops - Operations passed to musb_core by HW glue layer + * @quirks: flags for platform specific quirks + * @enable: enable device + * @disable: disable device + * @ep_offset: returns the end point offset + * @ep_select: selects the specified end point + * @fifo_mode: sets the fifo mode + * @fifo_offset: returns the fifo offset + * @readb: read 8 bits + * @writeb: write 8 bits + * @readw: read 16 bits + * @writew: write 16 bits + * @readl: read 32 bits + * @writel: write 32 bits + * @read_fifo: reads the fifo + * @write_fifo: writes to fifo * @init: turns on clocks, sets up platform-specific registers, etc * @exit: undoes @init * @set_mode: forcefully changes operating mode @@ -184,12 +166,34 @@ enum musb_g_ep0_state { * @adjust_channel_params: pre check for standard dma channel_program func */ struct musb_platform_ops { + +#define MUSB_DMA_UX500 BIT(6) +#define MUSB_DMA_CPPI41 BIT(5) +#define MUSB_DMA_CPPI BIT(4) +#define MUSB_DMA_TUSB_OMAP BIT(3) +#define MUSB_DMA_INVENTRA BIT(2) +#define MUSB_IN_TUSB BIT(1) +#define MUSB_INDEXED_EP BIT(0) + u32 quirks; + int (*init)(struct musb *musb); int (*exit)(struct musb *musb); void (*enable)(struct musb *musb); void (*disable)(struct musb *musb); + u32 (*ep_offset)(u8 epnum, u16 offset); + void (*ep_select)(void __iomem *mbase, u8 epnum); + u16 fifo_mode; + u32 (*fifo_offset)(u8 epnum); + u8 (*readb)(const void __iomem *addr, unsigned offset); + void (*writeb)(void __iomem *addr, unsigned offset, u8 data); + u16 (*readw)(const void __iomem *addr, unsigned offset); + void (*writew)(void __iomem *addr, unsigned offset, u16 data); + u32 (*readl)(const void __iomem *addr, unsigned offset); + void (*writel)(void __iomem *addr, unsigned offset, u32 data); + void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); + void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); int (*set_mode)(struct musb *musb, u8 mode); void (*try_idle)(struct musb *musb, unsigned long timeout); int (*reset)(struct musb *musb); @@ -212,8 +216,7 @@ struct musb_hw_ep { void __iomem *fifo; void __iomem *regs; -#if defined(CONFIG_USB_MUSB_TUSB6010) || \ - defined(CONFIG_USB_MUSB_TUSB6010_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) void __iomem *conf; #endif @@ -230,8 +233,7 @@ struct musb_hw_ep { struct dma_channel *tx_channel; struct dma_channel *rx_channel; -#if defined(CONFIG_USB_MUSB_TUSB6010) || \ - defined(CONFIG_USB_MUSB_TUSB6010_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) /* TUSB has "asynchronous" and "synchronous" dma modes */ dma_addr_t fifo_async; dma_addr_t fifo_sync; @@ -292,6 +294,7 @@ struct musb { /* device lock */ spinlock_t lock; + struct musb_io io; const struct musb_platform_ops *ops; struct musb_context_registers context; @@ -334,8 +337,7 @@ struct musb { void __iomem *ctrl_base; void __iomem *mregs; -#if defined(CONFIG_USB_MUSB_TUSB6010) || \ - defined(CONFIG_USB_MUSB_TUSB6010_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) dma_addr_t async; dma_addr_t sync; void __iomem *sync_va; @@ -390,6 +392,7 @@ struct musb { /* is_suspended means USB B_PERIPHERAL suspend */ unsigned is_suspended:1; + unsigned need_finish_resume :1; /* may_wakeup means remote wakeup is enabled */ unsigned may_wakeup:1; @@ -474,7 +477,7 @@ static inline int musb_read_fifosize(struct musb *musb, u8 reg = 0; /* read from core using indexed model */ - reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE)); + reg = musb_readb(mbase, musb->io.ep_offset(epnum, MUSB_FIFOSIZE)); /* 0's returned when no more endpoints */ if (!reg) return -ENODEV; diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index 5a9b977..f64fd96 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -253,6 +253,7 @@ static void cppi41_dma_callback(void *private_data) cppi41_trans_done(cppi41_channel); } else { struct cppi41_dma_controller *controller; + int is_hs = 0; /* * On AM335x it has been observed that the TX interrupt fires * too early that means the TXFIFO is not yet empty but the DMA @@ -265,7 +266,14 @@ static void cppi41_dma_callback(void *private_data) */ controller = cppi41_channel->controller; - if (musb->g.speed == USB_SPEED_HIGH) { + if (is_host_active(musb)) { + if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED) + is_hs = 1; + } else { + if (musb->g.speed == USB_SPEED_HIGH) + is_hs = 1; + } + if (is_hs) { unsigned wait = 25; do { diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 4c21679..ad3701a 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -49,33 +49,36 @@ struct musb_register_map { }; static const struct musb_register_map musb_regmap[] = { - { "FAddr", 0x00, 8 }, - { "Power", 0x01, 8 }, - { "Frame", 0x0c, 16 }, - { "Index", 0x0e, 8 }, - { "Testmode", 0x0f, 8 }, - { "TxMaxPp", 0x10, 16 }, - { "TxCSRp", 0x12, 16 }, - { "RxMaxPp", 0x14, 16 }, - { "RxCSR", 0x16, 16 }, - { "RxCount", 0x18, 16 }, - { "ConfigData", 0x1f, 8 }, - { "DevCtl", 0x60, 8 }, - { "MISC", 0x61, 8 }, - { "TxFIFOsz", 0x62, 8 }, - { "RxFIFOsz", 0x63, 8 }, - { "TxFIFOadd", 0x64, 16 }, - { "RxFIFOadd", 0x66, 16 }, - { "VControl", 0x68, 32 }, - { "HWVers", 0x6C, 16 }, - { "EPInfo", 0x78, 8 }, - { "RAMInfo", 0x79, 8 }, - { "LinkInfo", 0x7A, 8 }, - { "VPLen", 0x7B, 8 }, - { "HS_EOF1", 0x7C, 8 }, - { "FS_EOF1", 0x7D, 8 }, - { "LS_EOF1", 0x7E, 8 }, - { "SOFT_RST", 0x7F, 8 }, + { "FAddr", MUSB_FADDR, 8 }, + { "Power", MUSB_POWER, 8 }, + { "Frame", MUSB_FRAME, 16 }, + { "Index", MUSB_INDEX, 8 }, + { "Testmode", MUSB_TESTMODE, 8 }, + { "TxMaxPp", MUSB_TXMAXP, 16 }, + { "TxCSRp", MUSB_TXCSR, 16 }, + { "RxMaxPp", MUSB_RXMAXP, 16 }, + { "RxCSR", MUSB_RXCSR, 16 }, + { "RxCount", MUSB_RXCOUNT, 16 }, + { "ConfigData", MUSB_CONFIGDATA,8 }, + { "IntrRxE", MUSB_INTRRXE, 16 }, + { "IntrTxE", MUSB_INTRTXE, 16 }, + { "IntrUsbE", MUSB_INTRUSBE, 8 }, + { "DevCtl", MUSB_DEVCTL, 8 }, + { "BabbleCtl", MUSB_BABBLE_CTL,8 }, + { "TxFIFOsz", MUSB_TXFIFOSZ, 8 }, + { "RxFIFOsz", MUSB_RXFIFOSZ, 8 }, + { "TxFIFOadd", MUSB_TXFIFOADD, 16 }, + { "RxFIFOadd", MUSB_RXFIFOADD, 16 }, + { "VControl", 0x68, 32 }, + { "HWVers", 0x69, 16 }, + { "EPInfo", MUSB_EPINFO, 8 }, + { "RAMInfo", MUSB_RAMINFO, 8 }, + { "LinkInfo", MUSB_LINKINFO, 8 }, + { "VPLen", MUSB_VPLEN, 8 }, + { "HS_EOF1", MUSB_HS_EOF1, 8 }, + { "FS_EOF1", MUSB_FS_EOF1, 8 }, + { "LS_EOF1", MUSB_LS_EOF1, 8 }, + { "SOFT_RST", 0x7F, 8 }, { "DMA_CNTLch0", 0x204, 16 }, { "DMA_ADDRch0", 0x208, 32 }, { "DMA_COUNTch0", 0x20C, 32 }, diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 965c552..53bd0e7 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -179,9 +179,9 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) /* Never idle if active, or when VBUS timeout is not set as host */ if (musb->is_active || (musb->a_wait_bcon == 0 && - musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); del_timer(&glue->timer); glue->last_timer = jiffies; return; @@ -201,7 +201,7 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) glue->last_timer = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), jiffies_to_msecs(timeout - jiffies)); mod_timer(&glue->timer, timeout); } @@ -265,10 +265,10 @@ static void otg_timer(unsigned long _musb) */ devctl = dsps_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_BCON: dsps_writeb(musb->mregs, MUSB_DEVCTL, 0); skip_session = 1; @@ -277,10 +277,10 @@ static void otg_timer(unsigned long _musb) case OTG_STATE_A_IDLE: case OTG_STATE_B_IDLE: if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); } else { - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) @@ -288,7 +288,7 @@ static void otg_timer(unsigned long _musb) mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); break; case OTG_STATE_A_WAIT_VFALL: - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; dsps_writel(musb->ctrl_base, wrp->coreintr_set, MUSB_INTR_VBUSERROR << wrp->usb_shift); break; @@ -373,26 +373,26 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) * devctl. */ musb->int_usb &= ~MUSB_INTR_VBUSERROR; - musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); musb->xceiv->otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; del_timer(&glue->timer); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); musb->xceiv->otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; } /* NOTE: this must complete power-on within 100 ms. */ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), err ? " ERROR" : "", devctl); ret = IRQ_HANDLED; @@ -402,7 +402,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) ret |= musb_interrupt(musb); /* Poll for ID change in OTG port mode */ - if (musb->xceiv->state == OTG_STATE_B_IDLE && + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); out: @@ -633,6 +633,7 @@ static int dsps_musb_reset(struct musb *musb) } static struct musb_platform_ops dsps_ops = { + .quirks = MUSB_INDEXED_EP, .init = dsps_musb_init, .exit = dsps_musb_exit, @@ -726,7 +727,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL); if (!config) { - dev_err(dev, "failed to allocate musb hdrc config\n"); ret = -ENOMEM; goto err; } @@ -778,10 +778,8 @@ static int dsps_probe(struct platform_device *pdev) /* allocate glue */ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "unable to allocate glue memory\n"); + if (!glue) return -ENOMEM; - } glue->dev = &pdev->dev; glue->wrp = wrp; @@ -903,7 +901,7 @@ static int dsps_resume(struct device *dev) dsps_writel(mbase, wrp->mode, glue->context.mode); dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode); dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode); - if (musb->xceiv->state == OTG_STATE_B_IDLE && + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 24c8c02..49b04cb 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1546,7 +1546,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget) spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_B_PERIPHERAL: /* NOTE: OTG state machine doesn't include B_SUSPENDED; * that's part of the standard usb 1.1 state machine, and @@ -1587,7 +1587,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget) goto done; default: dev_dbg(musb->controller, "Unhandled wake: %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); goto done; } @@ -1684,8 +1684,7 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) static int musb_gadget_start(struct usb_gadget *g, struct usb_gadget_driver *driver); -static int musb_gadget_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver); +static int musb_gadget_stop(struct usb_gadget *g); static const struct usb_gadget_ops musb_gadget_operations = { .get_frame = musb_gadget_get_frame, @@ -1792,7 +1791,7 @@ int musb_gadget_setup(struct musb *musb) MUSB_DEV_MODE(musb); musb->xceiv->otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; @@ -1851,8 +1850,6 @@ static int musb_gadget_start(struct usb_gadget *g, pm_runtime_get_sync(musb->controller); - dev_dbg(musb->controller, "registering driver %s\n", driver->function); - musb->softconnect = 0; musb->gadget_driver = driver; @@ -1860,7 +1857,7 @@ static int musb_gadget_start(struct usb_gadget *g, musb->is_active = 1; otg_set_peripheral(otg, &musb->g); - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; spin_unlock_irqrestore(&musb->lock, flags); musb_start(musb); @@ -1925,8 +1922,7 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver) * * @param driver the gadget driver to unregister */ -static int musb_gadget_stop(struct usb_gadget *g, - struct usb_gadget_driver *driver) +static int musb_gadget_stop(struct usb_gadget *g) { struct musb *musb = gadget_to_musb(g); unsigned long flags; @@ -1945,13 +1941,10 @@ static int musb_gadget_stop(struct usb_gadget *g, (void) musb_gadget_vbus_draw(&musb->g, 0); - musb->xceiv->state = OTG_STATE_UNDEFINED; - stop_activity(musb, driver); + musb->xceiv->otg->state = OTG_STATE_UNDEFINED; + stop_activity(musb, NULL); otg_set_peripheral(musb->xceiv->otg, NULL); - dev_dbg(musb->controller, "unregistering driver %s\n", - driver ? driver->function : "(removed)"); - musb->is_active = 0; musb->gadget_driver = NULL; musb_platform_try_idle(musb, 0); @@ -1975,7 +1968,7 @@ static int musb_gadget_stop(struct usb_gadget *g, void musb_g_resume(struct musb *musb) { musb->is_suspended = 0; - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_B_IDLE: break; case OTG_STATE_B_WAIT_ACON: @@ -1989,7 +1982,7 @@ void musb_g_resume(struct musb *musb) break; default: WARNING("unhandled RESUME transition (%s)\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } } @@ -2001,10 +1994,10 @@ void musb_g_suspend(struct musb *musb) devctl = musb_readb(musb->mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "devctl %02x\n", devctl); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_B_IDLE: if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; break; case OTG_STATE_B_PERIPHERAL: musb->is_suspended = 1; @@ -2019,7 +2012,7 @@ void musb_g_suspend(struct musb *musb) * A_PERIPHERAL may need care too */ WARNING("unhandled SUSPEND transition (%s)\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } } @@ -2050,22 +2043,22 @@ void musb_g_disconnect(struct musb *musb) spin_lock(&musb->lock); } - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { default: dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n", - usb_otg_state_string(musb->xceiv->state)); - musb->xceiv->state = OTG_STATE_A_IDLE; + usb_otg_state_string(musb->xceiv->otg->state)); + musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); break; case OTG_STATE_A_PERIPHERAL: - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; MUSB_HST_MODE(musb); break; case OTG_STATE_B_WAIT_ACON: case OTG_STATE_B_HOST: case OTG_STATE_B_PERIPHERAL: case OTG_STATE_B_IDLE: - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; break; case OTG_STATE_B_SRP_INIT: break; @@ -2090,9 +2083,12 @@ __acquires(musb->lock) : NULL ); - /* report disconnect, if we didn't already (flushing EP state) */ - if (musb->g.speed != USB_SPEED_UNKNOWN) - musb_g_disconnect(musb); + /* report reset, if we didn't already (flushing EP state) */ + if (musb->gadget_driver && musb->g.speed != USB_SPEED_UNKNOWN) { + spin_unlock(&musb->lock); + usb_gadget_udc_reset(&musb->g, musb->gadget_driver); + spin_lock(&musb->lock); + } /* clear HR */ else if (devctl & MUSB_DEVCTL_HR) @@ -2125,13 +2121,13 @@ __acquires(musb->lock) * In that case, do not rely on devctl for setting * peripheral mode. */ - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; musb->g.is_a_peripheral = 0; } else if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; musb->g.is_a_peripheral = 0; } else { - musb->xceiv->state = OTG_STATE_A_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 855793d..23d474d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2463,7 +2463,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd) if (!is_host_active(musb)) return 0; - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: return 0; case OTG_STATE_A_WAIT_VRISE: @@ -2473,7 +2473,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd) */ devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; break; default: break; @@ -2481,7 +2481,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd) if (musb->is_active) { WARNING("trying to suspend as %s while active\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); return -EBUSY; } else return 0; @@ -2678,7 +2678,7 @@ int musb_host_setup(struct musb *musb, int power_budget) MUSB_HST_MODE(musb); musb->xceiv->otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; otg_set_host(musb->xceiv->otg, &hcd->self); hcd->self.otg_port = 1; diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index eebeed7..8a57a6f 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -37,86 +37,32 @@ #include <linux/io.h> -#ifndef CONFIG_BLACKFIN - -/* NOTE: these offsets are all in bytes */ - -static inline u16 musb_readw(const void __iomem *addr, unsigned offset) - { return __raw_readw(addr + offset); } - -static inline u32 musb_readl(const void __iomem *addr, unsigned offset) - { return __raw_readl(addr + offset); } - - -static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data) - { __raw_writew(data, addr + offset); } - -static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data) - { __raw_writel(data, addr + offset); } - - -#if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE) - -/* - * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum. +#define musb_ep_select(_mbase, _epnum) musb->io.ep_select((_mbase), (_epnum)) + +/** + * struct musb_io - IO functions for MUSB + * @quirks: platform specific flags + * @ep_offset: platform specific function to get end point offset + * @ep_select: platform specific function to select end point + * @fifo_offset: platform specific function to get fifo offset + * @read_fifo: platform specific function to read fifo + * @write_fifo: platform specific function to write fifo */ -static inline u8 musb_readb(const void __iomem *addr, unsigned offset) -{ - u16 tmp; - u8 val; - - tmp = __raw_readw(addr + (offset & ~1)); - if (offset & 1) - val = (tmp >> 8); - else - val = tmp & 0xff; - - return val; -} - -static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data) -{ - u16 tmp; - - tmp = __raw_readw(addr + (offset & ~1)); - if (offset & 1) - tmp = (data << 8) | (tmp & 0xff); - else - tmp = (tmp & 0xff00) | data; - - __raw_writew(tmp, addr + (offset & ~1)); -} - -#else - -static inline u8 musb_readb(const void __iomem *addr, unsigned offset) - { return __raw_readb(addr + offset); } - -static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data) - { __raw_writeb(data, addr + offset); } - -#endif /* CONFIG_USB_MUSB_TUSB6010 */ - -#else - -static inline u8 musb_readb(const void __iomem *addr, unsigned offset) - { return (u8) (bfin_read16(addr + offset)); } - -static inline u16 musb_readw(const void __iomem *addr, unsigned offset) - { return bfin_read16(addr + offset); } - -static inline u32 musb_readl(const void __iomem *addr, unsigned offset) - { return (u32) (bfin_read16(addr + offset)); } - -static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data) - { bfin_write16(addr + offset, (u16) data); } - -static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data) - { bfin_write16(addr + offset, data); } - -static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data) - { bfin_write16(addr + offset, (u16) data); } - -#endif /* CONFIG_BLACKFIN */ +struct musb_io { + u32 quirks; + u32 (*ep_offset)(u8 epnum, u16 offset); + void (*ep_select)(void __iomem *mbase, u8 epnum); + u32 (*fifo_offset)(u8 epnum); + void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); + void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); +}; + +/* Do not add new entries here, add them the struct musb_io instead */ +extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset); +extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); +extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset); +extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); +extern u32 (*musb_readl)(const void __iomem *addr, unsigned offset); +extern void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); #endif diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 37122a4..11f0be0 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -239,14 +239,6 @@ #define MUSB_INDEX 0x0E /* 8 bit */ #define MUSB_TESTMODE 0x0F /* 8 bit */ -/* Get offset for a given FIFO from musb->mregs */ -#if defined(CONFIG_USB_MUSB_TUSB6010) || \ - defined(CONFIG_USB_MUSB_TUSB6010_MODULE) -#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20)) -#else -#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4)) -#endif - /* * Additional Control Registers */ @@ -295,21 +287,7 @@ #define MUSB_FIFOSIZE 0x0F #define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */ -/* Offsets to endpoint registers in indexed model (using INDEX register) */ -#define MUSB_INDEXED_OFFSET(_epnum, _offset) \ - (0x10 + (_offset)) - -/* Offsets to endpoint registers in flat models */ -#define MUSB_FLAT_OFFSET(_epnum, _offset) \ - (0x100 + (0x10*(_epnum)) + (_offset)) - -#if defined(CONFIG_USB_MUSB_TUSB6010) || \ - defined(CONFIG_USB_MUSB_TUSB6010_MODULE) -/* TUSB6010 EP0 configuration register is special */ -#define MUSB_TUSB_OFFSET(_epnum, _offset) \ - (0x10 + _offset) #include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */ -#endif #define MUSB_TXCSR_MODE 0x2000 @@ -480,10 +458,6 @@ static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) #define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */ #define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */ -/* Get offset for a given FIFO from musb->mregs */ -#define MUSB_FIFO_OFFSET(epnum) \ - (USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8)) - /* * Additional Control Registers */ diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index e2d2d8c..b072420 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -69,9 +69,10 @@ void musb_host_finish_resume(struct work_struct *work) musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; usb_hcd_poll_rh_status(musb->hcd); /* NOTE: it might really be A_WAIT_BCON ... */ - musb->xceiv->state = OTG_STATE_A_HOST; + musb->xceiv->otg->state = OTG_STATE_A_HOST; spin_unlock_irqrestore(&musb->lock, flags); + musb_host_resume_root_hub(musb); } void musb_port_suspend(struct musb *musb, bool do_suspend) @@ -107,9 +108,9 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) dev_dbg(musb->controller, "Root port suspended, power %02x\n", power); musb->port1_status |= USB_PORT_STAT_SUSPEND; - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_HOST: - musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; musb->is_active = otg->host->b_hnp_enable; if (musb->is_active) mod_timer(&musb->otg_timer, jiffies @@ -118,13 +119,13 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) musb_platform_try_idle(musb, 0); break; case OTG_STATE_B_HOST: - musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; musb->is_active = otg->host->b_hnp_enable; musb_platform_try_idle(musb, 0); break; default: dev_dbg(musb->controller, "bogus rh suspend? %s\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } } else if (power & MUSB_POWER_SUSPENDM) { power &= ~MUSB_POWER_SUSPENDM; @@ -145,7 +146,7 @@ void musb_port_reset(struct musb *musb, bool do_reset) u8 power; void __iomem *mbase = musb->mregs; - if (musb->xceiv->state == OTG_STATE_B_IDLE) { + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) { dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n"); musb->port1_status &= ~USB_PORT_STAT_RESET; return; @@ -224,24 +225,24 @@ void musb_root_disconnect(struct musb *musb) usb_hcd_poll_rh_status(musb->hcd); musb->is_active = 0; - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_SUSPEND: if (otg->host->b_hnp_enable) { - musb->xceiv->state = OTG_STATE_A_PERIPHERAL; + musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL; musb->g.is_a_peripheral = 1; break; } /* FALLTHROUGH */ case OTG_STATE_A_HOST: - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; musb->is_active = 0; break; case OTG_STATE_A_WAIT_VFALL: - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; break; default: dev_dbg(musb->controller, "host disconnect (%s)\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } } diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index e8e9f9a..ab7ec09 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -195,6 +195,7 @@ static int dma_channel_abort(struct dma_channel *channel) { struct musb_dma_channel *musb_channel = channel->private_data; void __iomem *mbase = musb_channel->controller->base; + struct musb *musb = musb_channel->controller->private_data; u8 bchannel = musb_channel->idx; int offset; @@ -202,7 +203,7 @@ static int dma_channel_abort(struct dma_channel *channel) if (channel->status == MUSB_DMA_STATUS_BUSY) { if (musb_channel->transmit) { - offset = MUSB_EP_OFFSET(musb_channel->epnum, + offset = musb->io.ep_offset(musb_channel->epnum, MUSB_TXCSR); /* @@ -215,7 +216,7 @@ static int dma_channel_abort(struct dma_channel *channel) csr &= ~MUSB_TXCSR_DMAMODE; musb_writew(mbase, offset, csr); } else { - offset = MUSB_EP_OFFSET(musb_channel->epnum, + offset = musb->io.ep_offset(musb_channel->epnum, MUSB_RXCSR); csr = musb_readw(mbase, offset); @@ -326,7 +327,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) (musb_channel->max_packet_sz - 1))) ) { u8 epnum = musb_channel->epnum; - int offset = MUSB_EP_OFFSET(epnum, + int offset = musb->io.ep_offset(epnum, MUSB_TXCSR); u16 txcsr; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index d369bf1..763649e 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -65,15 +65,15 @@ static void musb_do_idle(unsigned long _musb) spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_BCON: devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); } else { - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } break; @@ -90,15 +90,15 @@ static void musb_do_idle(unsigned long _musb) musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; usb_hcd_poll_rh_status(musb->hcd); /* NOTE: it might really be A_WAIT_BCON ... */ - musb->xceiv->state = OTG_STATE_A_HOST; + musb->xceiv->otg->state = OTG_STATE_A_HOST; } break; case OTG_STATE_A_HOST: devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (devctl & MUSB_DEVCTL_BDEVICE) - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; else - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; default: break; } @@ -116,9 +116,9 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) /* Never idle if active, or when VBUS timeout is not set as host */ if (musb->is_active || ((musb->a_wait_bcon == 0) - && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { + && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) { dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); del_timer(&musb_idle_timer); last_timer = jiffies; return; @@ -135,7 +135,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), (unsigned long)jiffies_to_msecs(timeout - jiffies)); mod_timer(&musb_idle_timer, timeout); } @@ -153,7 +153,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (is_on) { - if (musb->xceiv->state == OTG_STATE_A_IDLE) { + if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) { int loops = 100; /* start the session */ devctl |= MUSB_DEVCTL_SESSION; @@ -162,7 +162,8 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) * Wait for the musb to set as A device to enable the * VBUS */ - while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { + while (musb_readb(musb->mregs, MUSB_DEVCTL) & + MUSB_DEVCTL_BDEVICE) { mdelay(5); cpu_relax(); @@ -179,7 +180,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) } else { musb->is_active = 1; otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; MUSB_HST_MODE(musb); } @@ -191,7 +192,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) */ otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; devctl &= ~MUSB_DEVCTL_SESSION; MUSB_DEV_MODE(musb); @@ -200,7 +201,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) dev_dbg(musb->controller, "VBUS %s, devctl %02x " /* otg %3x conf %08x prcm %08x */ "\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), musb_readb(musb->mregs, MUSB_DEVCTL)); } @@ -265,7 +266,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "ID GND\n"); otg->default_a = true; - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; if (musb->gadget_driver) { pm_runtime_get_sync(dev); @@ -279,7 +280,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "VBUS Connect\n"); otg->default_a = false; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; musb->xceiv->last_event = USB_EVENT_VBUS; if (musb->gadget_driver) pm_runtime_get_sync(dev); @@ -518,10 +519,8 @@ static int omap2430_probe(struct platform_device *pdev) int ret = -ENOMEM; glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); + if (!glue) goto err0; - } musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { @@ -543,25 +542,16 @@ static int omap2430_probe(struct platform_device *pdev) struct platform_device *control_pdev; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - dev_err(&pdev->dev, - "failed to allocate musb platform data\n"); + if (!pdata) goto err2; - } data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); - if (!data) { - dev_err(&pdev->dev, - "failed to allocate musb board data\n"); + if (!data) goto err2; - } config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); - if (!config) { - dev_err(&pdev->dev, - "failed to allocate musb hdrc config\n"); + if (!config) goto err2; - } of_property_read_u32(np, "mode", (u32 *)&pdata->mode); of_property_read_u32(np, "interface-type", diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 2daa779..3a5ffd5 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -126,6 +126,52 @@ static void tusb_wbus_quirk(struct musb *musb, int enabled) } } +static u32 tusb_fifo_offset(u8 epnum) +{ + return 0x200 + (epnum * 0x20); +} + +static u32 tusb_ep_offset(u8 epnum, u16 offset) +{ + return 0x10 + offset; +} + +/* TUSB mapping: "flat" plus ep0 special cases */ +static void tusb_ep_select(void __iomem *mbase, u8 epnum) +{ + musb_writeb(mbase, MUSB_INDEX, epnum); +} + +/* + * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum. + */ +static u8 tusb_readb(const void __iomem *addr, unsigned offset) +{ + u16 tmp; + u8 val; + + tmp = __raw_readw(addr + (offset & ~1)); + if (offset & 1) + val = (tmp >> 8); + else + val = tmp & 0xff; + + return val; +} + +static void tusb_writeb(void __iomem *addr, unsigned offset, u8 data) +{ + u16 tmp; + + tmp = __raw_readw(addr + (offset & ~1)); + if (offset & 1) + tmp = (data << 8) | (tmp & 0xff); + else + tmp = (tmp & 0xff00) | data; + + __raw_writew(tmp, addr + (offset & ~1)); +} + /* * TUSB 6010 may use a parallel bus that doesn't support byte ops; * so both loading and unloading FIFOs need explicit byte counts. @@ -173,7 +219,7 @@ static inline void tusb_fifo_read_unaligned(void __iomem *fifo, } } -void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf) +static void tusb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf) { struct musb *musb = hw_ep->musb; void __iomem *ep_conf = hw_ep->conf; @@ -223,7 +269,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf) tusb_fifo_write_unaligned(fifo, buf, len); } -void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf) +static void tusb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf) { struct musb *musb = hw_ep->musb; void __iomem *ep_conf = hw_ep->conf; @@ -415,13 +461,13 @@ static void musb_do_idle(unsigned long _musb) spin_lock_irqsave(&musb->lock, flags); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_BCON: if ((musb->a_wait_bcon != 0) && (musb->idle_timeout == 0 || time_after(jiffies, musb->idle_timeout))) { dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); } /* FALLTHROUGH */ case OTG_STATE_A_IDLE: @@ -474,9 +520,9 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout) /* Never idle if active, or when VBUS timeout is not set as host */ if (musb->is_active || ((musb->a_wait_bcon == 0) - && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { + && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) { dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->otg->state)); del_timer(&musb_idle_timer); last_timer = jiffies; return; @@ -493,7 +539,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), (unsigned long)jiffies_to_msecs(timeout - jiffies)); mod_timer(&musb_idle_timer, timeout); } @@ -524,7 +570,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) if (is_on) { timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE); otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; conf |= TUSB_DEV_CONF_USB_HOST_MODE; @@ -537,16 +583,16 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) /* If ID pin is grounded, we want to be a_idle */ otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) { - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_VRISE: case OTG_STATE_A_WAIT_BCON: - musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; break; case OTG_STATE_A_WAIT_VFALL: - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; break; default: - musb->xceiv->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; } musb->is_active = 0; otg->default_a = 1; @@ -554,7 +600,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) } else { musb->is_active = 0; otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); } @@ -569,7 +615,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), musb_readb(musb->mregs, MUSB_DEVCTL), musb_readl(tbase, TUSB_DEV_OTG_STAT), conf, prcm); @@ -668,23 +714,23 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) { dev_dbg(musb->controller, "Forcing disconnect (no interrupt)\n"); - if (musb->xceiv->state != OTG_STATE_B_IDLE) { + if (musb->xceiv->otg->state != OTG_STATE_B_IDLE) { /* INTR_DISCONNECT can hide... */ - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; musb->int_usb |= MUSB_INTR_DISCONNECT; } musb->is_active = 0; } dev_dbg(musb->controller, "vbus change, %s, otg %03x\n", - usb_otg_state_string(musb->xceiv->state), otg_stat); + usb_otg_state_string(musb->xceiv->otg->state), otg_stat); idle_timeout = jiffies + (1 * HZ); schedule_work(&musb->irq_work); } else /* A-dev state machine */ { dev_dbg(musb->controller, "vbus change, %s, otg %03x\n", - usb_otg_state_string(musb->xceiv->state), otg_stat); + usb_otg_state_string(musb->xceiv->otg->state), otg_stat); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_IDLE: dev_dbg(musb->controller, "Got SRP, turning on VBUS\n"); musb_platform_set_vbus(musb, 1); @@ -731,9 +777,9 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) u8 devctl; dev_dbg(musb->controller, "%s timer, %03x\n", - usb_otg_state_string(musb->xceiv->state), otg_stat); + usb_otg_state_string(musb->xceiv->otg->state), otg_stat); - switch (musb->xceiv->state) { + switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_VRISE: /* VBUS has probably been valid for a while now, * but may well have bounced out of range a bit @@ -745,7 +791,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) dev_dbg(musb->controller, "devctl %02x\n", devctl); break; } - musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; musb->is_active = 0; idle_timeout = jiffies + msecs_to_jiffies(musb->a_wait_bcon); @@ -1135,9 +1181,17 @@ static int tusb_musb_exit(struct musb *musb) } static const struct musb_platform_ops tusb_ops = { + .quirks = MUSB_IN_TUSB, .init = tusb_musb_init, .exit = tusb_musb_exit, + .ep_offset = tusb_ep_offset, + .ep_select = tusb_ep_select, + .fifo_offset = tusb_fifo_offset, + .readb = tusb_readb, + .writeb = tusb_writeb, + .read_fifo = tusb_read_fifo, + .write_fifo = tusb_write_fifo, .enable = tusb_musb_enable, .disable = tusb_musb_disable, @@ -1164,10 +1218,8 @@ static int tusb_probe(struct platform_device *pdev) int ret; glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); + if (!glue) return -ENOMEM; - } glue->dev = &pdev->dev; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index dc666e9..abf7272 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -56,7 +56,7 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) devctl = musb_readb(musb->mregs, MUSB_DEVCTL); if (is_on) { - if (musb->xceiv->state == OTG_STATE_A_IDLE) { + if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) { /* start the session */ devctl |= MUSB_DEVCTL_SESSION; musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); @@ -76,7 +76,7 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) } else { musb->is_active = 1; musb->xceiv->otg->default_a = 1; - musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; MUSB_HST_MODE(musb); } @@ -102,7 +102,7 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) mdelay(200); dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", - usb_otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->otg->state), musb_readb(musb->mregs, MUSB_DEVCTL)); } @@ -112,7 +112,7 @@ static int musb_otg_notifications(struct notifier_block *nb, struct musb *musb = container_of(nb, struct musb, nb); dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n", - event, usb_otg_state_string(musb->xceiv->state)); + event, usb_otg_state_string(musb->xceiv->otg->state)); switch (event) { case UX500_MUSB_ID: @@ -127,7 +127,7 @@ static int musb_otg_notifications(struct notifier_block *nb, if (is_host_active(musb)) ux500_musb_set_vbus(musb, 0); else - musb->xceiv->state = OTG_STATE_B_IDLE; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; break; default: dev_dbg(musb->controller, "ID float\n"); @@ -188,8 +188,10 @@ static int ux500_musb_exit(struct musb *musb) } static const struct musb_platform_ops ux500_ops = { + .quirks = MUSB_INDEXED_EP, .init = ux500_musb_init, .exit = ux500_musb_exit, + .fifo_mode = 5, .set_vbus = ux500_musb_set_vbus, }; @@ -247,10 +249,8 @@ static int ux500_probe(struct platform_device *pdev) } glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); + if (!glue) goto err0; - } musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 221faed..e93845c 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -91,9 +91,9 @@ static bool ux500_configure_channel(struct dma_channel *channel, struct scatterlist sg; struct dma_slave_config slave_conf; enum dma_slave_buswidth addr_width; - dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) + - ux500_channel->controller->phy_base); struct musb *musb = ux500_channel->controller->private_data; + dma_addr_t usb_fifo_addr = (musb->io.fifo_offset(hw_ep->epnum) + + ux500_channel->controller->phy_base); dev_dbg(musb->controller, "packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n", @@ -121,8 +121,7 @@ static bool ux500_configure_channel(struct dma_channel *channel, slave_conf.dst_maxburst = 16; slave_conf.device_fc = false; - dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, - (unsigned long) &slave_conf); + dmaengine_slave_config(dma_chan, &slave_conf); dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -246,9 +245,7 @@ static int ux500_dma_channel_abort(struct dma_channel *channel) musb_writew(epio, MUSB_RXCSR, csr); } - ux500_channel->dma_chan->device-> - device_control(ux500_channel->dma_chan, - DMA_TERMINATE_ALL, 0); + dmaengine_terminate_all(ux500_channel->dma_chan); channel->status = MUSB_DMA_STATUS_FREE; } return 0; diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 11ab2c4..8cd7d19 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -1,6 +1,4 @@ /* - * drivers/usb/otg/ab8500_usb.c - * * USB transceiver driver for AB8500 family chips * * Copyright (C) 2010-2013 ST-Ericsson AB @@ -446,7 +444,8 @@ static int ab9540_usb_link_status_update(struct ab8500_usb *ab, if (event != UX500_MUSB_RIDB) event = UX500_MUSB_NONE; /* Fallback to default B_IDLE as nothing is connected. */ - ab->phy.state = OTG_STATE_B_IDLE; + ab->phy.otg->state = OTG_STATE_B_IDLE; + usb_phy_set_event(&ab->phy, USB_EVENT_NONE); break; case USB_LINK_ACA_RID_C_NM_9540: @@ -461,12 +460,14 @@ static int ab9540_usb_link_status_update(struct ab8500_usb *ab, ab8500_usb_peri_phy_en(ab); atomic_notifier_call_chain(&ab->phy.notifier, UX500_MUSB_PREPARE, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED); } if (ab->mode == USB_IDLE) { ab->mode = USB_PERIPHERAL; ab8500_usb_peri_phy_en(ab); atomic_notifier_call_chain(&ab->phy.notifier, UX500_MUSB_PREPARE, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED); } if (event != UX500_MUSB_RIDC) event = UX500_MUSB_VBUS; @@ -502,6 +503,7 @@ static int ab9540_usb_link_status_update(struct ab8500_usb *ab, event = UX500_MUSB_CHARGER; atomic_notifier_call_chain(&ab->phy.notifier, event, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER); break; case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540: @@ -526,6 +528,7 @@ static int ab9540_usb_link_status_update(struct ab8500_usb *ab, ab->mode = USB_IDLE; ab->phy.otg->default_a = false; ab->vbus_draw = 0; + usb_phy_set_event(&ab->phy, USB_EVENT_NONE); } } break; @@ -584,7 +587,8 @@ static int ab8540_usb_link_status_update(struct ab8500_usb *ab, * Fallback to default B_IDLE as nothing * is connected */ - ab->phy.state = OTG_STATE_B_IDLE; + ab->phy.otg->state = OTG_STATE_B_IDLE; + usb_phy_set_event(&ab->phy, USB_EVENT_NONE); break; case USB_LINK_ACA_RID_C_NM_8540: @@ -598,6 +602,7 @@ static int ab8540_usb_link_status_update(struct ab8500_usb *ab, ab8500_usb_peri_phy_en(ab); atomic_notifier_call_chain(&ab->phy.notifier, UX500_MUSB_PREPARE, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED); } if (event != UX500_MUSB_RIDC) event = UX500_MUSB_VBUS; @@ -626,6 +631,7 @@ static int ab8540_usb_link_status_update(struct ab8500_usb *ab, event = UX500_MUSB_CHARGER; atomic_notifier_call_chain(&ab->phy.notifier, event, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER); break; case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540: @@ -648,6 +654,7 @@ static int ab8540_usb_link_status_update(struct ab8500_usb *ab, ab->mode = USB_IDLE; ab->phy.otg->default_a = false; ab->vbus_draw = 0; + usb_phy_set_event(&ab->phy, USB_EVENT_NONE); } break; @@ -693,7 +700,8 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, * Fallback to default B_IDLE as nothing * is connected */ - ab->phy.state = OTG_STATE_B_IDLE; + ab->phy.otg->state = OTG_STATE_B_IDLE; + usb_phy_set_event(&ab->phy, USB_EVENT_NONE); break; case USB_LINK_ACA_RID_C_NM_8505: @@ -707,6 +715,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, ab8500_usb_peri_phy_en(ab); atomic_notifier_call_chain(&ab->phy.notifier, UX500_MUSB_PREPARE, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED); } if (event != UX500_MUSB_RIDC) event = UX500_MUSB_VBUS; @@ -734,6 +743,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, event = UX500_MUSB_CHARGER; atomic_notifier_call_chain(&ab->phy.notifier, event, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER); break; default: @@ -776,7 +786,8 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab, if (event != UX500_MUSB_RIDB) event = UX500_MUSB_NONE; /* Fallback to default B_IDLE as nothing is connected */ - ab->phy.state = OTG_STATE_B_IDLE; + ab->phy.otg->state = OTG_STATE_B_IDLE; + usb_phy_set_event(&ab->phy, USB_EVENT_NONE); break; case USB_LINK_ACA_RID_C_NM_8500: @@ -794,6 +805,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab, ab8500_usb_peri_phy_en(ab); atomic_notifier_call_chain(&ab->phy.notifier, UX500_MUSB_PREPARE, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED); } if (event != UX500_MUSB_RIDC) event = UX500_MUSB_VBUS; @@ -820,6 +832,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab, event = UX500_MUSB_CHARGER; atomic_notifier_call_chain(&ab->phy.notifier, event, &ab->vbus_draw); + usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER); break; case USB_LINK_RESERVED_8500: @@ -1056,7 +1069,7 @@ static int ab8500_usb_set_peripheral(struct usb_otg *otg, if (!otg) return -ENODEV; - ab = phy_to_ab(otg->phy); + ab = phy_to_ab(otg->usb_phy); ab->phy.otg->gadget = gadget; @@ -1080,7 +1093,7 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host) if (!otg) return -ENODEV; - ab = phy_to_ab(otg->phy); + ab = phy_to_ab(otg->usb_phy); ab->phy.otg->host = host; @@ -1380,9 +1393,9 @@ static int ab8500_usb_probe(struct platform_device *pdev) ab->phy.label = "ab8500"; ab->phy.set_suspend = ab8500_usb_set_suspend; ab->phy.set_power = ab8500_usb_set_power; - ab->phy.state = OTG_STATE_UNDEFINED; + ab->phy.otg->state = OTG_STATE_UNDEFINED; - otg->phy = &ab->phy; + otg->usb_phy = &ab->phy; otg->set_host = ab8500_usb_set_host; otg->set_peripheral = ab8500_usb_set_peripheral; diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c index 35b6083..2e923c5 100644 --- a/drivers/usb/phy/phy-am335x-control.c +++ b/drivers/usb/phy/phy-am335x-control.c @@ -147,10 +147,8 @@ static int am335x_control_usb_probe(struct platform_device *pdev) phy_ctrl = of_id->data; ctrl_usb = devm_kzalloc(&pdev->dev, sizeof(*ctrl_usb), GFP_KERNEL); - if (!ctrl_usb) { - dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); + if (!ctrl_usb) return -ENOMEM; - } ctrl_usb->dev = &pdev->dev; diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index f1ea599..ab38aa3 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -274,7 +274,7 @@ void b_srp_end(unsigned long foo) fsl_otg_dischrg_vbus(0); srp_wait_done = 1; - if ((fsl_otg_dev->phy.state == OTG_STATE_B_SRP_INIT) && + if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) && fsl_otg_dev->fsm.b_sess_vld) fsl_otg_dev->fsm.b_srp_done = 1; } @@ -499,7 +499,8 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on) { struct usb_otg *otg = fsm->otg; struct device *dev; - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + struct fsl_otg *otg_dev = + container_of(otg->usb_phy, struct fsl_otg, phy); u32 retval = 0; if (!otg->host) @@ -594,7 +595,7 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) if (!otg) return -ENODEV; - otg_dev = container_of(otg->phy, struct fsl_otg, phy); + otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); if (otg_dev != fsl_otg_dev) return -ENODEV; @@ -623,7 +624,7 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) /* Mini-A cable connected */ struct otg_fsm *fsm = &otg_dev->fsm; - otg->phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; fsm->protocol = PROTO_UNDEF; } } @@ -644,7 +645,7 @@ static int fsl_otg_set_peripheral(struct usb_otg *otg, if (!otg) return -ENODEV; - otg_dev = container_of(otg->phy, struct fsl_otg, phy); + otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); VDBG("otg_dev 0x%x\n", (int)otg_dev); VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev); if (otg_dev != fsl_otg_dev) @@ -681,7 +682,7 @@ static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA) { if (!fsl_otg_dev) return -ENODEV; - if (phy->state == OTG_STATE_B_PERIPHERAL) + if (phy->otg->state == OTG_STATE_B_PERIPHERAL) pr_info("FSL OTG: Draw %d mA\n", mA); return 0; @@ -714,10 +715,10 @@ static int fsl_otg_start_srp(struct usb_otg *otg) { struct fsl_otg *otg_dev; - if (!otg || otg->phy->state != OTG_STATE_B_IDLE) + if (!otg || otg->state != OTG_STATE_B_IDLE) return -ENODEV; - otg_dev = container_of(otg->phy, struct fsl_otg, phy); + otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); if (otg_dev != fsl_otg_dev) return -ENODEV; @@ -735,7 +736,7 @@ static int fsl_otg_start_hnp(struct usb_otg *otg) if (!otg) return -ENODEV; - otg_dev = container_of(otg->phy, struct fsl_otg, phy); + otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); if (otg_dev != fsl_otg_dev) return -ENODEV; @@ -857,7 +858,7 @@ static int fsl_otg_conf(struct platform_device *pdev) fsl_otg_tc->phy.dev = &pdev->dev; fsl_otg_tc->phy.set_power = fsl_otg_set_power; - fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy; + fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy; fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host; fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral; fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp; @@ -989,10 +990,10 @@ int usb_otg_start(struct platform_device *pdev) * Also: record initial state of ID pin */ if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) { - p_otg->phy.state = OTG_STATE_UNDEFINED; + p_otg->phy.otg->state = OTG_STATE_UNDEFINED; p_otg->fsm.id = 1; } else { - p_otg->phy.state = OTG_STATE_A_IDLE; + p_otg->phy.otg->state = OTG_STATE_A_IDLE; p_otg->fsm.id = 0; } @@ -1047,7 +1048,7 @@ static int show_fsl_usb2_otg_state(struct device *dev, /* State */ t = scnprintf(next, size, "OTG state: %s\n\n", - usb_otg_state_string(fsl_otg_dev->phy.state)); + usb_otg_state_string(fsl_otg_dev->phy.otg->state)); size -= t; next += t; diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h index 5986c96..2314995 100644 --- a/drivers/usb/phy/phy-fsl-usb.h +++ b/drivers/usb/phy/phy-fsl-usb.h @@ -298,7 +298,7 @@ /* SE0 Time Before SRP */ #define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */ -#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate) +#define SET_OTG_STATE(phy, newstate) ((phy)->otg->state = newstate) struct usb_dr_mmap { /* Capability register */ diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 7594e50..4ba1f57 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -1,6 +1,4 @@ /* - * drivers/usb/otg/nop-usb-xceiv.c - * * NOP USB transceiver for all USB transceiver which are either built-in * into USB IP or which are mostly autonomous. * @@ -123,7 +121,7 @@ static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) } otg->gadget = gadget; - otg->phy->state = OTG_STATE_B_IDLE; + otg->state = OTG_STATE_B_IDLE; return 0; } @@ -225,10 +223,10 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, nop->phy.dev = nop->dev; nop->phy.label = "nop-xceiv"; nop->phy.set_suspend = nop_set_suspend; - nop->phy.state = OTG_STATE_UNDEFINED; nop->phy.type = type; - nop->phy.otg->phy = &nop->phy; + nop->phy.otg->state = OTG_STATE_UNDEFINED; + nop->phy.otg->usb_phy = &nop->phy; nop->phy.otg->set_host = nop_set_host; nop->phy.otg->set_peripheral = nop_set_peripheral; diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index f4b14bd..5451172 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -121,7 +121,7 @@ static void gpio_vbus_work(struct work_struct *work) if (vbus) { status = USB_EVENT_VBUS; - gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.otg->state = OTG_STATE_B_PERIPHERAL; gpio_vbus->phy.last_event = status; usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); @@ -134,6 +134,7 @@ static void gpio_vbus_work(struct work_struct *work) atomic_notifier_call_chain(&gpio_vbus->phy.notifier, status, gpio_vbus->phy.otg->gadget); + usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED); } else { /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) @@ -143,11 +144,12 @@ static void gpio_vbus_work(struct work_struct *work) usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); status = USB_EVENT_NONE; - gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.otg->state = OTG_STATE_B_IDLE; gpio_vbus->phy.last_event = status; atomic_notifier_call_chain(&gpio_vbus->phy.notifier, status, gpio_vbus->phy.otg->gadget); + usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_NONE); } } @@ -180,7 +182,7 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg, struct platform_device *pdev; int gpio; - gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy); + gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy); pdev = to_platform_device(gpio_vbus->dev); pdata = dev_get_platdata(gpio_vbus->dev); gpio = pdata->gpio_pullup; @@ -196,7 +198,7 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg, set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(otg->gadget); - otg->phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; otg->gadget = NULL; return 0; @@ -218,7 +220,7 @@ static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA) gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); - if (phy->state == OTG_STATE_B_PERIPHERAL) + if (phy->otg->state == OTG_STATE_B_PERIPHERAL) set_vbus_draw(gpio_vbus, mA); return 0; } @@ -269,9 +271,9 @@ static int gpio_vbus_probe(struct platform_device *pdev) gpio_vbus->phy.dev = gpio_vbus->dev; gpio_vbus->phy.set_power = gpio_vbus_set_power; gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; - gpio_vbus->phy.state = OTG_STATE_UNDEFINED; - gpio_vbus->phy.otg->phy = &gpio_vbus->phy; + gpio_vbus->phy.otg->state = OTG_STATE_UNDEFINED; + gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy; gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral; err = devm_gpio_request(&pdev->dev, gpio, "vbus_detect"); diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c index 8eea56d..a2dfb2a 100644 --- a/drivers/usb/phy/phy-isp1301-omap.c +++ b/drivers/usb/phy/phy-isp1301-omap.c @@ -234,7 +234,7 @@ isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) static inline const char *state_name(struct isp1301 *isp) { - return usb_otg_state_string(isp->phy.state); + return usb_otg_state_string(isp->phy.otg->state); } /*-------------------------------------------------------------------------*/ @@ -249,7 +249,7 @@ static inline const char *state_name(struct isp1301 *isp) static void power_down(struct isp1301 *isp) { - isp->phy.state = OTG_STATE_UNDEFINED; + isp->phy.otg->state = OTG_STATE_UNDEFINED; // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND); @@ -339,7 +339,7 @@ static void a_idle(struct isp1301 *isp, const char *tag) { u32 l; - if (isp->phy.state == OTG_STATE_A_IDLE) + if (isp->phy.otg->state == OTG_STATE_A_IDLE) return; isp->phy.otg->default_a = 1; @@ -351,7 +351,7 @@ static void a_idle(struct isp1301 *isp, const char *tag) isp->phy.otg->gadget->is_a_peripheral = 1; gadget_suspend(isp); } - isp->phy.state = OTG_STATE_A_IDLE; + isp->phy.otg->state = OTG_STATE_A_IDLE; l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; omap_writel(l, OTG_CTRL); isp->last_otg_ctrl = l; @@ -363,7 +363,7 @@ static void b_idle(struct isp1301 *isp, const char *tag) { u32 l; - if (isp->phy.state == OTG_STATE_B_IDLE) + if (isp->phy.otg->state == OTG_STATE_B_IDLE) return; isp->phy.otg->default_a = 0; @@ -375,7 +375,7 @@ static void b_idle(struct isp1301 *isp, const char *tag) isp->phy.otg->gadget->is_a_peripheral = 0; gadget_suspend(isp); } - isp->phy.state = OTG_STATE_B_IDLE; + isp->phy.otg->state = OTG_STATE_B_IDLE; l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; omap_writel(l, OTG_CTRL); isp->last_otg_ctrl = l; @@ -474,7 +474,7 @@ static void check_state(struct isp1301 *isp, const char *tag) default: break; } - if (isp->phy.state == state && !extra) + if (isp->phy.otg->state == state && !extra) return; pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag, usb_otg_state_string(state), fsm, state_name(isp), @@ -498,23 +498,23 @@ static void update_otg1(struct isp1301 *isp, u8 int_src) if (int_src & INTR_SESS_VLD) otg_ctrl |= OTG_ASESSVLD; - else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) { + else if (isp->phy.otg->state == OTG_STATE_A_WAIT_VFALL) { a_idle(isp, "vfall"); otg_ctrl &= ~OTG_CTRL_BITS; } if (int_src & INTR_VBUS_VLD) otg_ctrl |= OTG_VBUSVLD; if (int_src & INTR_ID_GND) { /* default-A */ - if (isp->phy.state == OTG_STATE_B_IDLE - || isp->phy.state + if (isp->phy.otg->state == OTG_STATE_B_IDLE + || isp->phy.otg->state == OTG_STATE_UNDEFINED) { a_idle(isp, "init"); return; } } else { /* default-B */ otg_ctrl |= OTG_ID; - if (isp->phy.state == OTG_STATE_A_IDLE - || isp->phy.state == OTG_STATE_UNDEFINED) { + if (isp->phy.otg->state == OTG_STATE_A_IDLE + || isp->phy.otg->state == OTG_STATE_UNDEFINED) { b_idle(isp, "init"); return; } @@ -548,14 +548,14 @@ static void otg_update_isp(struct isp1301 *isp) isp->last_otg_ctrl = otg_ctrl; otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS; - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_B_IDLE: case OTG_STATE_B_PERIPHERAL: case OTG_STATE_B_SRP_INIT: if (!(otg_ctrl & OTG_PULLUP)) { // if (otg_ctrl & OTG_B_HNPEN) { if (isp->phy.otg->gadget->b_hnp_enable) { - isp->phy.state = OTG_STATE_B_WAIT_ACON; + isp->phy.otg->state = OTG_STATE_B_WAIT_ACON; pr_debug(" --> b_wait_acon\n"); } goto pulldown; @@ -585,7 +585,7 @@ pulldown: if (!(isp->phy.otg->host)) otg_ctrl &= ~OTG_DRV_VBUS; - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_A_SUSPEND: if (otg_ctrl & OTG_DRV_VBUS) { set |= OTG1_VBUS_DRV; @@ -596,7 +596,7 @@ pulldown: /* FALLTHROUGH */ case OTG_STATE_A_VBUS_ERR: - isp->phy.state = OTG_STATE_A_WAIT_VFALL; + isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL; pr_debug(" --> a_wait_vfall\n"); /* FALLTHROUGH */ case OTG_STATE_A_WAIT_VFALL: @@ -605,7 +605,7 @@ pulldown: break; case OTG_STATE_A_IDLE: if (otg_ctrl & OTG_DRV_VBUS) { - isp->phy.state = OTG_STATE_A_WAIT_VRISE; + isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE; pr_debug(" --> a_wait_vrise\n"); } /* FALLTHROUGH */ @@ -625,17 +625,17 @@ pulldown: if (otg_change & OTG_PULLUP) { u32 l; - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_B_IDLE: if (clr & OTG1_DP_PULLUP) break; - isp->phy.state = OTG_STATE_B_PERIPHERAL; + isp->phy.otg->state = OTG_STATE_B_PERIPHERAL; pr_debug(" --> b_peripheral\n"); break; case OTG_STATE_A_SUSPEND: if (clr & OTG1_DP_PULLUP) break; - isp->phy.state = OTG_STATE_A_PERIPHERAL; + isp->phy.otg->state = OTG_STATE_A_PERIPHERAL; pr_debug(" --> a_peripheral\n"); break; default: @@ -673,7 +673,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) * remote wakeup (SRP, normal) using their own timer * to give "check cable and A-device" messages. */ - if (isp->phy.state == OTG_STATE_B_SRP_INIT) + if (isp->phy.otg->state == OTG_STATE_B_SRP_INIT) b_idle(isp, "srp_timeout"); omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC); @@ -691,7 +691,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) omap_writel(otg_ctrl, OTG_CTRL); /* subset of b_peripheral()... */ - isp->phy.state = OTG_STATE_B_PERIPHERAL; + isp->phy.otg->state = OTG_STATE_B_PERIPHERAL; pr_debug(" --> b_peripheral\n"); omap_writew(B_HNP_FAIL, OTG_IRQ_SRC); @@ -703,7 +703,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) state_name(isp), omap_readl(OTG_CTRL)); isp1301_defer_work(isp, WORK_UPDATE_OTG); - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_A_IDLE: if (!otg->host) break; @@ -734,7 +734,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) otg_ctrl |= OTG_BUSDROP; otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; omap_writel(otg_ctrl, OTG_CTRL); - isp->phy.state = OTG_STATE_A_WAIT_VFALL; + isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL; omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC); ret = IRQ_HANDLED; @@ -748,7 +748,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) otg_ctrl |= OTG_BUSDROP; otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; omap_writel(otg_ctrl, OTG_CTRL); - isp->phy.state = OTG_STATE_A_VBUS_ERR; + isp->phy.otg->state = OTG_STATE_A_VBUS_ERR; omap_writew(A_VBUS_ERR, OTG_IRQ_SRC); ret = IRQ_HANDLED; @@ -769,7 +769,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) /* role is peripheral */ if (otg_ctrl & OTG_DRIVER_SEL) { - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_A_IDLE: b_idle(isp, __func__); break; @@ -786,18 +786,18 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) } if (otg->host) { - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_B_WAIT_ACON: - isp->phy.state = OTG_STATE_B_HOST; + isp->phy.otg->state = OTG_STATE_B_HOST; pr_debug(" --> b_host\n"); kick = 1; break; case OTG_STATE_A_WAIT_BCON: - isp->phy.state = OTG_STATE_A_HOST; + isp->phy.otg->state = OTG_STATE_A_HOST; pr_debug(" --> a_host\n"); break; case OTG_STATE_A_PERIPHERAL: - isp->phy.state = OTG_STATE_A_WAIT_BCON; + isp->phy.otg->state = OTG_STATE_A_WAIT_BCON; pr_debug(" --> a_wait_bcon\n"); break; default: @@ -937,7 +937,7 @@ static void b_peripheral(struct isp1301 *isp) /* UDC driver just set OTG_BSESSVLD */ isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP); isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN); - isp->phy.state = OTG_STATE_B_PERIPHERAL; + isp->phy.otg->state = OTG_STATE_B_PERIPHERAL; pr_debug(" --> b_peripheral\n"); dump_regs(isp, "2periph"); #endif @@ -947,7 +947,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) { struct usb_otg *otg = isp->phy.otg; u8 isp_stat, isp_bstat; - enum usb_otg_state state = isp->phy.state; + enum usb_otg_state state = isp->phy.otg->state; if (stat & INTR_BDIS_ACON) pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp)); @@ -970,7 +970,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) * when HNP is used. */ if (isp_stat & INTR_VBUS_VLD) - isp->phy.state = OTG_STATE_A_HOST; + isp->phy.otg->state = OTG_STATE_A_HOST; break; case OTG_STATE_A_WAIT_VFALL: if (!(isp_stat & INTR_SESS_VLD)) @@ -978,7 +978,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) break; default: if (!(isp_stat & INTR_VBUS_VLD)) - isp->phy.state = OTG_STATE_A_VBUS_ERR; + isp->phy.otg->state = OTG_STATE_A_VBUS_ERR; break; } isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); @@ -1007,7 +1007,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) if (otg->default_a) { switch (state) { default: - isp->phy.state = OTG_STATE_A_WAIT_VFALL; + isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL; break; case OTG_STATE_A_WAIT_VFALL: state = OTG_STATE_A_IDLE; @@ -1020,7 +1020,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) host_suspend(isp); isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_BDIS_ACON_EN); - isp->phy.state = OTG_STATE_B_IDLE; + isp->phy.otg->state = OTG_STATE_B_IDLE; l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; l &= ~OTG_CTRL_BITS; omap_writel(l, OTG_CTRL); @@ -1031,7 +1031,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) } isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_B_PERIPHERAL: case OTG_STATE_B_WAIT_ACON: case OTG_STATE_B_HOST: @@ -1071,7 +1071,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) } } - if (state != isp->phy.state) + if (state != isp->phy.otg->state) pr_debug(" isp, %s -> %s\n", usb_otg_state_string(state), state_name(isp)); @@ -1129,10 +1129,10 @@ isp1301_work(struct work_struct *work) * skip A_WAIT_VRISE; hc transitions invisibly * skip A_WAIT_BCON; same. */ - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_A_WAIT_BCON: case OTG_STATE_A_WAIT_VRISE: - isp->phy.state = OTG_STATE_A_HOST; + isp->phy.otg->state = OTG_STATE_A_HOST; pr_debug(" --> a_host\n"); otg_ctrl = omap_readl(OTG_CTRL); otg_ctrl |= OTG_A_BUSREQ; @@ -1141,7 +1141,7 @@ isp1301_work(struct work_struct *work) omap_writel(otg_ctrl, OTG_CTRL); break; case OTG_STATE_B_WAIT_ACON: - isp->phy.state = OTG_STATE_B_HOST; + isp->phy.otg->state = OTG_STATE_B_HOST; pr_debug(" --> b_host (acon)\n"); break; case OTG_STATE_B_HOST: @@ -1275,7 +1275,7 @@ static int isp1301_otg_enable(struct isp1301 *isp) static int isp1301_set_host(struct usb_otg *otg, struct usb_bus *host) { - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy); if (isp != the_transceiver) return -ENODEV; @@ -1331,7 +1331,7 @@ isp1301_set_host(struct usb_otg *otg, struct usb_bus *host) static int isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy); if (isp != the_transceiver) return -ENODEV; @@ -1368,7 +1368,7 @@ isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) } power_up(isp); - isp->phy.state = OTG_STATE_B_IDLE; + isp->phy.otg->state = OTG_STATE_B_IDLE; if (machine_is_omap_h2() || machine_is_omap_h3()) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); @@ -1403,7 +1403,7 @@ isp1301_set_power(struct usb_phy *dev, unsigned mA) { if (!the_transceiver) return -ENODEV; - if (dev->state == OTG_STATE_B_PERIPHERAL) + if (dev->otg->state == OTG_STATE_B_PERIPHERAL) enable_vbus_draw(the_transceiver, mA); return 0; } @@ -1411,10 +1411,10 @@ isp1301_set_power(struct usb_phy *dev, unsigned mA) static int isp1301_start_srp(struct usb_otg *otg) { - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy); u32 otg_ctrl; - if (isp != the_transceiver || isp->phy.state != OTG_STATE_B_IDLE) + if (isp != the_transceiver || isp->phy.otg->state != OTG_STATE_B_IDLE) return -ENODEV; otg_ctrl = omap_readl(OTG_CTRL); @@ -1424,7 +1424,7 @@ isp1301_start_srp(struct usb_otg *otg) otg_ctrl |= OTG_B_BUSREQ; otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK; omap_writel(otg_ctrl, OTG_CTRL); - isp->phy.state = OTG_STATE_B_SRP_INIT; + isp->phy.otg->state = OTG_STATE_B_SRP_INIT; pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), omap_readl(OTG_CTRL)); @@ -1438,7 +1438,7 @@ static int isp1301_start_hnp(struct usb_otg *otg) { #ifdef CONFIG_USB_OTG - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy); u32 l; if (isp != the_transceiver) @@ -1452,9 +1452,9 @@ isp1301_start_hnp(struct usb_otg *otg) /* We want hardware to manage most HNP protocol timings. * So do this part as early as possible... */ - switch (isp->phy.state) { + switch (isp->phy.otg->state) { case OTG_STATE_B_HOST: - isp->phy.state = OTG_STATE_B_PERIPHERAL; + isp->phy.otg->state = OTG_STATE_B_PERIPHERAL; /* caller will suspend next */ break; case OTG_STATE_A_HOST: @@ -1583,7 +1583,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) isp->phy.label = DRIVER_NAME; isp->phy.set_power = isp1301_set_power, - isp->phy.otg->phy = &isp->phy; + isp->phy.otg->usb_phy = &isp->phy; isp->phy.otg->set_host = isp1301_set_host, isp->phy.otg->set_peripheral = isp1301_set_peripheral, isp->phy.otg->start_srp = isp1301_start_srp, diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 7843ef7..e120d87 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -708,7 +708,7 @@ static void msm_otg_start_host(struct usb_phy *phy, int on) static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) { - struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); + struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy); struct usb_hcd *hcd; /* @@ -716,16 +716,16 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) * only peripheral configuration. */ if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) { - dev_info(otg->phy->dev, "Host mode is not supported\n"); + dev_info(otg->usb_phy->dev, "Host mode is not supported\n"); return -ENODEV; } if (!host) { - if (otg->phy->state == OTG_STATE_A_HOST) { - pm_runtime_get_sync(otg->phy->dev); - msm_otg_start_host(otg->phy, 0); + if (otg->state == OTG_STATE_A_HOST) { + pm_runtime_get_sync(otg->usb_phy->dev); + msm_otg_start_host(otg->usb_phy, 0); otg->host = NULL; - otg->phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; schedule_work(&motg->sm_work); } else { otg->host = NULL; @@ -738,14 +738,14 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) hcd->power_budget = motg->pdata->power_budget; otg->host = host; - dev_dbg(otg->phy->dev, "host driver registered w/ tranceiver\n"); + dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n"); /* * Kick the state machine work, if peripheral is not supported * or peripheral is already registered with us. */ if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) { - pm_runtime_get_sync(otg->phy->dev); + pm_runtime_get_sync(otg->usb_phy->dev); schedule_work(&motg->sm_work); } @@ -782,23 +782,23 @@ static void msm_otg_start_peripheral(struct usb_phy *phy, int on) static int msm_otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { - struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); + struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy); /* * Fail peripheral registration if this board can support * only host configuration. */ if (motg->pdata->mode == USB_DR_MODE_HOST) { - dev_info(otg->phy->dev, "Peripheral mode is not supported\n"); + dev_info(otg->usb_phy->dev, "Peripheral mode is not supported\n"); return -ENODEV; } if (!gadget) { - if (otg->phy->state == OTG_STATE_B_PERIPHERAL) { - pm_runtime_get_sync(otg->phy->dev); - msm_otg_start_peripheral(otg->phy, 0); + if (otg->state == OTG_STATE_B_PERIPHERAL) { + pm_runtime_get_sync(otg->usb_phy->dev); + msm_otg_start_peripheral(otg->usb_phy, 0); otg->gadget = NULL; - otg->phy->state = OTG_STATE_UNDEFINED; + otg->state = OTG_STATE_UNDEFINED; schedule_work(&motg->sm_work); } else { otg->gadget = NULL; @@ -807,14 +807,15 @@ static int msm_otg_set_peripheral(struct usb_otg *otg, return 0; } otg->gadget = gadget; - dev_dbg(otg->phy->dev, "peripheral driver registered w/ tranceiver\n"); + dev_dbg(otg->usb_phy->dev, + "peripheral driver registered w/ tranceiver\n"); /* * Kick the state machine work, if host is not supported * or host is already registered with us. */ if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) { - pm_runtime_get_sync(otg->phy->dev); + pm_runtime_get_sync(otg->usb_phy->dev); schedule_work(&motg->sm_work); } @@ -1170,20 +1171,20 @@ static void msm_otg_sm_work(struct work_struct *w) struct msm_otg *motg = container_of(w, struct msm_otg, sm_work); struct usb_otg *otg = motg->phy.otg; - switch (otg->phy->state) { + switch (otg->state) { case OTG_STATE_UNDEFINED: - dev_dbg(otg->phy->dev, "OTG_STATE_UNDEFINED state\n"); - msm_otg_reset(otg->phy); + dev_dbg(otg->usb_phy->dev, "OTG_STATE_UNDEFINED state\n"); + msm_otg_reset(otg->usb_phy); msm_otg_init_sm(motg); - otg->phy->state = OTG_STATE_B_IDLE; + otg->state = OTG_STATE_B_IDLE; /* FALL THROUGH */ case OTG_STATE_B_IDLE: - dev_dbg(otg->phy->dev, "OTG_STATE_B_IDLE state\n"); + dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_IDLE state\n"); if (!test_bit(ID, &motg->inputs) && otg->host) { /* disable BSV bit */ writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC); - msm_otg_start_host(otg->phy, 1); - otg->phy->state = OTG_STATE_A_HOST; + msm_otg_start_host(otg->usb_phy, 1); + otg->state = OTG_STATE_A_HOST; } else if (test_bit(B_SESS_VLD, &motg->inputs)) { switch (motg->chg_state) { case USB_CHG_STATE_UNDEFINED: @@ -1198,14 +1199,16 @@ static void msm_otg_sm_work(struct work_struct *w) case USB_CDP_CHARGER: msm_otg_notify_charger(motg, IDEV_CHG_MAX); - msm_otg_start_peripheral(otg->phy, 1); - otg->phy->state + msm_otg_start_peripheral(otg->usb_phy, + 1); + otg->state = OTG_STATE_B_PERIPHERAL; break; case USB_SDP_CHARGER: msm_otg_notify_charger(motg, IUNIT); - msm_otg_start_peripheral(otg->phy, 1); - otg->phy->state + msm_otg_start_peripheral(otg->usb_phy, + 1); + otg->state = OTG_STATE_B_PERIPHERAL; break; default: @@ -1222,36 +1225,36 @@ static void msm_otg_sm_work(struct work_struct *w) * is incremented in charger detection work. */ if (cancel_delayed_work_sync(&motg->chg_work)) { - pm_runtime_put_sync(otg->phy->dev); - msm_otg_reset(otg->phy); + pm_runtime_put_sync(otg->usb_phy->dev); + msm_otg_reset(otg->usb_phy); } msm_otg_notify_charger(motg, 0); motg->chg_state = USB_CHG_STATE_UNDEFINED; motg->chg_type = USB_INVALID_CHARGER; } - if (otg->phy->state == OTG_STATE_B_IDLE) - pm_runtime_put_sync(otg->phy->dev); + if (otg->state == OTG_STATE_B_IDLE) + pm_runtime_put_sync(otg->usb_phy->dev); break; case OTG_STATE_B_PERIPHERAL: - dev_dbg(otg->phy->dev, "OTG_STATE_B_PERIPHERAL state\n"); + dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_PERIPHERAL state\n"); if (!test_bit(B_SESS_VLD, &motg->inputs) || !test_bit(ID, &motg->inputs)) { msm_otg_notify_charger(motg, 0); - msm_otg_start_peripheral(otg->phy, 0); + msm_otg_start_peripheral(otg->usb_phy, 0); motg->chg_state = USB_CHG_STATE_UNDEFINED; motg->chg_type = USB_INVALID_CHARGER; - otg->phy->state = OTG_STATE_B_IDLE; - msm_otg_reset(otg->phy); + otg->state = OTG_STATE_B_IDLE; + msm_otg_reset(otg->usb_phy); schedule_work(w); } break; case OTG_STATE_A_HOST: - dev_dbg(otg->phy->dev, "OTG_STATE_A_HOST state\n"); + dev_dbg(otg->usb_phy->dev, "OTG_STATE_A_HOST state\n"); if (test_bit(ID, &motg->inputs)) { - msm_otg_start_host(otg->phy, 0); - otg->phy->state = OTG_STATE_B_IDLE; - msm_otg_reset(otg->phy); + msm_otg_start_host(otg->usb_phy, 0); + otg->state = OTG_STATE_B_IDLE; + msm_otg_reset(otg->usb_phy); schedule_work(w); } break; @@ -1303,7 +1306,7 @@ static int msm_otg_mode_show(struct seq_file *s, void *unused) struct msm_otg *motg = s->private; struct usb_otg *otg = motg->phy.otg; - switch (otg->phy->state) { + switch (otg->state) { case OTG_STATE_A_HOST: seq_puts(s, "host\n"); break; @@ -1353,7 +1356,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, switch (req_mode) { case USB_DR_MODE_UNKNOWN: - switch (otg->phy->state) { + switch (otg->state) { case OTG_STATE_A_HOST: case OTG_STATE_B_PERIPHERAL: set_bit(ID, &motg->inputs); @@ -1364,7 +1367,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, } break; case USB_DR_MODE_PERIPHERAL: - switch (otg->phy->state) { + switch (otg->state) { case OTG_STATE_B_IDLE: case OTG_STATE_A_HOST: set_bit(ID, &motg->inputs); @@ -1375,7 +1378,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, } break; case USB_DR_MODE_HOST: - switch (otg->phy->state) { + switch (otg->state) { case OTG_STATE_B_IDLE: case OTG_STATE_B_PERIPHERAL: clear_bit(ID, &motg->inputs); @@ -1388,7 +1391,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, goto out; } - pm_runtime_get_sync(otg->phy->dev); + pm_runtime_get_sync(otg->usb_phy->dev); schedule_work(&motg->sm_work); out: return status; @@ -1505,10 +1508,8 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) } pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL); - if (!pdata->phy_init_seq) { - dev_warn(&pdev->dev, "No space for PHY init sequence\n"); + if (!pdata->phy_init_seq) return 0; - } ret = of_property_read_u32_array(node, "qcom,phy-init-sequence", pdata->phy_init_seq, words); @@ -1530,10 +1531,8 @@ static int msm_otg_probe(struct platform_device *pdev) void __iomem *phy_select; motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL); - if (!motg) { - dev_err(&pdev->dev, "unable to allocate msm_otg\n"); + if (!motg) return -ENOMEM; - } pdata = dev_get_platdata(&pdev->dev); if (!pdata) { @@ -1546,10 +1545,8 @@ static int msm_otg_probe(struct platform_device *pdev) motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), GFP_KERNEL); - if (!motg->phy.otg) { - dev_err(&pdev->dev, "unable to allocate msm_otg\n"); + if (!motg->phy.otg) return -ENOMEM; - } phy = &motg->phy; phy->dev = &pdev->dev; @@ -1674,7 +1671,7 @@ static int msm_otg_probe(struct platform_device *pdev) phy->io_ops = &msm_otg_io_ops; - phy->otg->phy = &motg->phy; + phy->otg->usb_phy = &motg->phy; phy->otg->set_host = msm_otg_set_host; phy->otg->set_peripheral = msm_otg_set_peripheral; @@ -1775,7 +1772,7 @@ static int msm_otg_runtime_idle(struct device *dev) * This 1 sec delay also prevents entering into LPM immediately * after asynchronous interrupt. */ - if (otg->phy->state != OTG_STATE_UNDEFINED) + if (otg->state != OTG_STATE_UNDEFINED) pm_schedule_suspend(dev, 1000); return -EAGAIN; diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index 7d80c54..b234d46 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -56,7 +56,7 @@ static char *state_string[] = { static int mv_otg_set_vbus(struct usb_otg *otg, bool on) { - struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy); + struct mv_otg *mvotg = container_of(otg->usb_phy, struct mv_otg, phy); if (mvotg->pdata->set_vbus == NULL) return -ENODEV; @@ -339,68 +339,68 @@ static void mv_otg_update_state(struct mv_otg *mvotg) { struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; struct usb_phy *phy = &mvotg->phy; - int old_state = phy->state; + int old_state = mvotg->phy.otg->state; switch (old_state) { case OTG_STATE_UNDEFINED: - phy->state = OTG_STATE_B_IDLE; + mvotg->phy.otg->state = OTG_STATE_B_IDLE; /* FALL THROUGH */ case OTG_STATE_B_IDLE: if (otg_ctrl->id == 0) - phy->state = OTG_STATE_A_IDLE; + mvotg->phy.otg->state = OTG_STATE_A_IDLE; else if (otg_ctrl->b_sess_vld) - phy->state = OTG_STATE_B_PERIPHERAL; + mvotg->phy.otg->state = OTG_STATE_B_PERIPHERAL; break; case OTG_STATE_B_PERIPHERAL: if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0) - phy->state = OTG_STATE_B_IDLE; + mvotg->phy.otg->state = OTG_STATE_B_IDLE; break; case OTG_STATE_A_IDLE: if (otg_ctrl->id) - phy->state = OTG_STATE_B_IDLE; + mvotg->phy.otg->state = OTG_STATE_B_IDLE; else if (!(otg_ctrl->a_bus_drop) && (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det)) - phy->state = OTG_STATE_A_WAIT_VRISE; + mvotg->phy.otg->state = OTG_STATE_A_WAIT_VRISE; break; case OTG_STATE_A_WAIT_VRISE: if (otg_ctrl->a_vbus_vld) - phy->state = OTG_STATE_A_WAIT_BCON; + mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON; break; case OTG_STATE_A_WAIT_BCON: if (otg_ctrl->id || otg_ctrl->a_bus_drop || otg_ctrl->a_wait_bcon_timeout) { mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); mvotg->otg_ctrl.a_wait_bcon_timeout = 0; - phy->state = OTG_STATE_A_WAIT_VFALL; + mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL; otg_ctrl->a_bus_req = 0; } else if (!otg_ctrl->a_vbus_vld) { mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); mvotg->otg_ctrl.a_wait_bcon_timeout = 0; - phy->state = OTG_STATE_A_VBUS_ERR; + mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR; } else if (otg_ctrl->b_conn) { mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); mvotg->otg_ctrl.a_wait_bcon_timeout = 0; - phy->state = OTG_STATE_A_HOST; + mvotg->phy.otg->state = OTG_STATE_A_HOST; } break; case OTG_STATE_A_HOST: if (otg_ctrl->id || !otg_ctrl->b_conn || otg_ctrl->a_bus_drop) - phy->state = OTG_STATE_A_WAIT_BCON; + mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON; else if (!otg_ctrl->a_vbus_vld) - phy->state = OTG_STATE_A_VBUS_ERR; + mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR; break; case OTG_STATE_A_WAIT_VFALL: if (otg_ctrl->id || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld) || otg_ctrl->a_bus_req) - phy->state = OTG_STATE_A_IDLE; + mvotg->phy.otg->state = OTG_STATE_A_IDLE; break; case OTG_STATE_A_VBUS_ERR: if (otg_ctrl->id || otg_ctrl->a_clr_err || otg_ctrl->a_bus_drop) { otg_ctrl->a_clr_err = 0; - phy->state = OTG_STATE_A_WAIT_VFALL; + mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL; } break; default: @@ -420,8 +420,8 @@ static void mv_otg_work(struct work_struct *work) run: /* work queue is single thread, or we need spin_lock to protect */ phy = &mvotg->phy; - otg = phy->otg; - old_state = phy->state; + otg = mvotg->phy.otg; + old_state = otg->state; if (!mvotg->active) return; @@ -429,22 +429,24 @@ run: mv_otg_update_inputs(mvotg); mv_otg_update_state(mvotg); - if (old_state != phy->state) { + if (old_state != mvotg->phy.otg->state) { dev_info(&mvotg->pdev->dev, "change from state %s to %s\n", state_string[old_state], - state_string[phy->state]); + state_string[mvotg->phy.otg->state]); - switch (phy->state) { + switch (mvotg->phy.otg->state) { case OTG_STATE_B_IDLE: otg->default_a = 0; if (old_state == OTG_STATE_B_PERIPHERAL) mv_otg_start_periphrals(mvotg, 0); mv_otg_reset(mvotg); mv_otg_disable(mvotg); + usb_phy_set_event(&mvotg->phy, USB_EVENT_NONE); break; case OTG_STATE_B_PERIPHERAL: mv_otg_enable(mvotg); mv_otg_start_periphrals(mvotg, 1); + usb_phy_set_event(&mvotg->phy, USB_EVENT_ENUMERATED); break; case OTG_STATE_A_IDLE: otg->default_a = 1; @@ -545,8 +547,8 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr, return -1; /* We will use this interface to change to A device */ - if (mvotg->phy.state != OTG_STATE_B_IDLE - && mvotg->phy.state != OTG_STATE_A_IDLE) + if (mvotg->phy.otg->state != OTG_STATE_B_IDLE + && mvotg->phy.otg->state != OTG_STATE_A_IDLE) return -1; /* The clock may disabled and we need to set irq for ID detected */ @@ -686,10 +688,8 @@ static int mv_otg_probe(struct platform_device *pdev) } mvotg = devm_kzalloc(&pdev->dev, sizeof(*mvotg), GFP_KERNEL); - if (!mvotg) { - dev_err(&pdev->dev, "failed to allocate memory!\n"); + if (!mvotg) return -ENOMEM; - } otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); if (!otg) @@ -717,9 +717,9 @@ static int mv_otg_probe(struct platform_device *pdev) mvotg->phy.dev = &pdev->dev; mvotg->phy.otg = otg; mvotg->phy.label = driver_name; - mvotg->phy.state = OTG_STATE_UNDEFINED; - otg->phy = &mvotg->phy; + otg->state = OTG_STATE_UNDEFINED; + otg->usb_phy = &mvotg->phy; otg->set_host = mv_otg_set_host; otg->set_peripheral = mv_otg_set_peripheral; otg->set_vbus = mv_otg_set_vbus; diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 0e0c415..a55dadc 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -390,10 +390,8 @@ static int mxs_phy_probe(struct platform_device *pdev) } mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); - if (!mxs_phy) { - dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n"); + if (!mxs_phy) return -ENOMEM; - } /* Some SoCs don't have anatop registers */ if (of_get_property(np, "fsl,anatop", NULL)) { diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c index 388d89f..f838084 100644 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ b/drivers/usb/phy/phy-rcar-gen2-usb.c @@ -195,10 +195,8 @@ static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) return PTR_ERR(base); priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(dev, "Memory allocation failed\n"); + if (!priv) return -ENOMEM; - } spin_lock_init(&priv->lock); priv->clk = clk; diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c index e9f3a93..1e09b83 100644 --- a/drivers/usb/phy/phy-rcar-usb.c +++ b/drivers/usb/phy/phy-rcar-usb.c @@ -200,10 +200,8 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) return PTR_ERR(reg1); priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(dev, "priv data allocation error\n"); + if (!priv) return -ENOMEM; - } priv->reg0 = reg0; priv->reg1 = reg1; diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c index cc61ee4..d391c79 100644 --- a/drivers/usb/phy/phy-tahvo.c +++ b/drivers/usb/phy/phy-tahvo.c @@ -81,33 +81,35 @@ static void check_vbus_state(struct tahvo_usb *tu) reg = retu_read(rdev, TAHVO_REG_IDSR); if (reg & TAHVO_STAT_VBUS) { - switch (tu->phy.state) { + switch (tu->phy.otg->state) { case OTG_STATE_B_IDLE: /* Enable the gadget driver */ if (tu->phy.otg->gadget) usb_gadget_vbus_connect(tu->phy.otg->gadget); - tu->phy.state = OTG_STATE_B_PERIPHERAL; + tu->phy.otg->state = OTG_STATE_B_PERIPHERAL; + usb_phy_set_event(&tu->phy, USB_EVENT_ENUMERATED); break; case OTG_STATE_A_IDLE: /* * Session is now valid assuming the USB hub is driving * Vbus. */ - tu->phy.state = OTG_STATE_A_HOST; + tu->phy.otg->state = OTG_STATE_A_HOST; break; default: break; } dev_info(&tu->pt_dev->dev, "USB cable connected\n"); } else { - switch (tu->phy.state) { + switch (tu->phy.otg->state) { case OTG_STATE_B_PERIPHERAL: if (tu->phy.otg->gadget) usb_gadget_vbus_disconnect(tu->phy.otg->gadget); - tu->phy.state = OTG_STATE_B_IDLE; + tu->phy.otg->state = OTG_STATE_B_IDLE; + usb_phy_set_event(&tu->phy, USB_EVENT_NONE); break; case OTG_STATE_A_HOST: - tu->phy.state = OTG_STATE_A_IDLE; + tu->phy.otg->state = OTG_STATE_A_IDLE; break; default: break; @@ -132,14 +134,14 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu) /* Power up the transceiver in USB host mode */ retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND | USBR_MASTER_SW2 | USBR_MASTER_SW1); - tu->phy.state = OTG_STATE_A_IDLE; + tu->phy.otg->state = OTG_STATE_A_IDLE; check_vbus_state(tu); } static void tahvo_usb_stop_host(struct tahvo_usb *tu) { - tu->phy.state = OTG_STATE_A_IDLE; + tu->phy.otg->state = OTG_STATE_A_IDLE; } static void tahvo_usb_become_peripheral(struct tahvo_usb *tu) @@ -151,7 +153,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb *tu) /* Power up transceiver and set it in USB peripheral mode */ retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW); - tu->phy.state = OTG_STATE_B_IDLE; + tu->phy.otg->state = OTG_STATE_B_IDLE; check_vbus_state(tu); } @@ -160,7 +162,7 @@ static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu) { if (tu->phy.otg->gadget) usb_gadget_vbus_disconnect(tu->phy.otg->gadget); - tu->phy.state = OTG_STATE_B_IDLE; + tu->phy.otg->state = OTG_STATE_B_IDLE; } static void tahvo_usb_power_off(struct tahvo_usb *tu) @@ -173,7 +175,7 @@ static void tahvo_usb_power_off(struct tahvo_usb *tu) /* Power off transceiver */ retu_write(rdev, TAHVO_REG_USBR, 0); - tu->phy.state = OTG_STATE_UNDEFINED; + tu->phy.otg->state = OTG_STATE_UNDEFINED; } static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend) @@ -196,7 +198,8 @@ static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend) static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host) { - struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy); + struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb, + phy); dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host); @@ -225,7 +228,8 @@ static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host) static int tahvo_usb_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { - struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy); + struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb, + phy); dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget); @@ -379,11 +383,11 @@ static int tahvo_usb_probe(struct platform_device *pdev) /* Create OTG interface */ tahvo_usb_power_off(tu); tu->phy.dev = &pdev->dev; - tu->phy.state = OTG_STATE_UNDEFINED; + tu->phy.otg->state = OTG_STATE_UNDEFINED; tu->phy.label = DRIVER_NAME; tu->phy.set_suspend = tahvo_usb_set_suspend; - tu->phy.otg->phy = &tu->phy; + tu->phy.otg->usb_phy = &tu->phy; tu->phy.otg->set_host = tahvo_usb_set_host; tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral; diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 886f180..fa2bfa4 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -880,11 +880,8 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, tegra_phy->config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); - if (!tegra_phy->config) { - dev_err(&pdev->dev, - "unable to allocate memory for USB UTMIP config\n"); + if (!tegra_phy->config) return -ENOMEM; - } config = tegra_phy->config; @@ -979,10 +976,8 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) int err; tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL); - if (!tegra_phy) { - dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); + if (!tegra_phy) return -ENOMEM; - } match = of_match_device(tegra_usb_phy_id_table, &pdev->dev); if (!match) { diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c index 4e3877c..f48a7a2 100644 --- a/drivers/usb/phy/phy-ulpi.c +++ b/drivers/usb/phy/phy-ulpi.c @@ -211,7 +211,7 @@ static int ulpi_init(struct usb_phy *phy) static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host) { - struct usb_phy *phy = otg->phy; + struct usb_phy *phy = otg->usb_phy; unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL); if (!host) { @@ -237,7 +237,7 @@ static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host) static int ulpi_set_vbus(struct usb_otg *otg, bool on) { - struct usb_phy *phy = otg->phy; + struct usb_phy *phy = otg->usb_phy; unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL); flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT); @@ -276,7 +276,7 @@ otg_ulpi_create(struct usb_phy_io_ops *ops, phy->otg = otg; phy->init = ulpi_init; - otg->phy = phy; + otg->usb_phy = phy; otg->set_host = ulpi_set_host; otg->set_vbus = ulpi_set_vbus; diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 045cd30..b4066a0 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -191,7 +191,9 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, phy = __of_usb_find_phy(node); if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { - phy = ERR_PTR(-EPROBE_DEFER); + if (!IS_ERR(phy)) + phy = ERR_PTR(-EPROBE_DEFER); + devres_free(ptr); goto err1; } @@ -444,3 +446,15 @@ int usb_bind_phy(const char *dev_name, u8 index, return 0; } EXPORT_SYMBOL_GPL(usb_bind_phy); + +/** + * usb_phy_set_event - set event to phy event + * @x: the phy returned by usb_get_phy(); + * + * This sets event to phy event + */ +void usb_phy_set_event(struct usb_phy *x, unsigned long event) +{ + x->last_event = event; +} +EXPORT_SYMBOL_GPL(usb_phy_set_event); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 169307b..3714787 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -126,13 +126,15 @@ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) { u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; - u16 val = DPRPU | HSE | USBE; + u16 val = HSE | USBE; /* * if enable * * - select Function mode - * - D+ Line Pull-up + * - D+ Line Pull-up is disabled + * When D+ Line Pull-up is enabled, + * calling usbhs_sys_function_pullup(,1) */ usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); } diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index a7996da..0427cdd 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -102,6 +102,10 @@ struct usbhs_priv; #define DEVADD8 0x00E0 #define DEVADD9 0x00E2 #define DEVADDA 0x00E4 +#define D2FIFOSEL 0x00F0 /* for R-Car Gen2 */ +#define D2FIFOCTR 0x00F2 /* for R-Car Gen2 */ +#define D3FIFOSEL 0x00F4 /* for R-Car Gen2 */ +#define D3FIFOCTR 0x00F6 /* for R-Car Gen2 */ /* SYSCFG */ #define SCKE (1 << 10) /* USB Module Clock Enable */ @@ -269,7 +273,8 @@ struct usbhs_priv { */ struct usbhs_fifo_info fifo_info; - struct usb_phy *phy; + struct usb_phy *usb_phy; + struct phy *phy; }; /* diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index b0c97a3..f46271c 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -21,8 +21,6 @@ #include "pipe.h" #define usbhsf_get_cfifo(p) (&((p)->fifo_info.cfifo)) -#define usbhsf_get_d0fifo(p) (&((p)->fifo_info.d0fifo)) -#define usbhsf_get_d1fifo(p) (&((p)->fifo_info.d1fifo)) #define usbhsf_is_cfifo(p, f) (usbhsf_get_cfifo(p) == f) #define usbhsf_fifo_is_busy(f) ((f)->pipe) /* see usbhs_pipe_select_fifo */ @@ -577,14 +575,6 @@ static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_number(pipe), pkt->length, pkt->actual, *is_done, pkt->zero); - /* - * Transmission end - */ - if (*is_done) { - if (usbhs_pipe_is_dcp(pipe)) - usbhs_dcp_control_transfer_done(pipe); - } - usbhsf_fifo_unselect(pipe, fifo); return 0; @@ -722,14 +712,6 @@ usbhs_fifo_read_end: usbhs_pipe_number(pipe), pkt->length, pkt->actual, *is_done, pkt->zero); - /* - * Transmission end - */ - if (*is_done) { - if (usbhs_pipe_is_dcp(pipe)) - usbhs_dcp_control_transfer_done(pipe); - } - usbhs_fifo_read_busy: usbhsf_fifo_unselect(pipe, fifo); @@ -777,18 +759,13 @@ static struct usbhs_fifo *usbhsf_get_dma_fifo(struct usbhs_priv *priv, struct usbhs_pkt *pkt) { struct usbhs_fifo *fifo; + int i; - /* DMA :: D0FIFO */ - fifo = usbhsf_get_d0fifo(priv); - if (usbhsf_dma_chan_get(fifo, pkt) && - !usbhsf_fifo_is_busy(fifo)) - return fifo; - - /* DMA :: D1FIFO */ - fifo = usbhsf_get_d1fifo(priv); - if (usbhsf_dma_chan_get(fifo, pkt) && - !usbhsf_fifo_is_busy(fifo)) - return fifo; + usbhs_for_each_dfifo(priv, fifo, i) { + if (usbhsf_dma_chan_get(fifo, pkt) && + !usbhsf_fifo_is_busy(fifo)) + return fifo; + } return NULL; } @@ -1176,6 +1153,24 @@ static void usbhsf_dma_complete(void *arg) usbhs_pipe_number(pipe), ret); } +void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ + + /* clear DCP FIFO of transmission */ + if (usbhsf_fifo_select(pipe, fifo, 1) < 0) + return; + usbhsf_fifo_clear(pipe, fifo); + usbhsf_fifo_unselect(pipe, fifo); + + /* clear DCP FIFO of reception */ + if (usbhsf_fifo_select(pipe, fifo, 0) < 0) + return; + usbhsf_fifo_clear(pipe, fifo); + usbhsf_fifo_unselect(pipe, fifo); +} + /* * fifo init */ @@ -1183,8 +1178,8 @@ void usbhs_fifo_init(struct usbhs_priv *priv) { struct usbhs_mod *mod = usbhs_mod_get_current(priv); struct usbhs_fifo *cfifo = usbhsf_get_cfifo(priv); - struct usbhs_fifo *d0fifo = usbhsf_get_d0fifo(priv); - struct usbhs_fifo *d1fifo = usbhsf_get_d1fifo(priv); + struct usbhs_fifo *dfifo; + int i; mod->irq_empty = usbhsf_irq_empty; mod->irq_ready = usbhsf_irq_ready; @@ -1192,8 +1187,8 @@ void usbhs_fifo_init(struct usbhs_priv *priv) mod->irq_brdysts = 0; cfifo->pipe = NULL; - d0fifo->pipe = NULL; - d1fifo->pipe = NULL; + usbhs_for_each_dfifo(priv, dfifo, i) + dfifo->pipe = NULL; } void usbhs_fifo_quit(struct usbhs_priv *priv) @@ -1206,6 +1201,25 @@ void usbhs_fifo_quit(struct usbhs_priv *priv) mod->irq_brdysts = 0; } +#define __USBHS_DFIFO_INIT(priv, fifo, channel, fifo_port) \ +do { \ + fifo = usbhsf_get_dnfifo(priv, channel); \ + fifo->name = "D"#channel"FIFO"; \ + fifo->port = fifo_port; \ + fifo->sel = D##channel##FIFOSEL; \ + fifo->ctr = D##channel##FIFOCTR; \ + fifo->tx_slave.shdma_slave.slave_id = \ + usbhs_get_dparam(priv, d##channel##_tx_id); \ + fifo->rx_slave.shdma_slave.slave_id = \ + usbhs_get_dparam(priv, d##channel##_rx_id); \ + usbhsf_dma_init(priv, fifo); \ +} while (0) + +#define USBHS_DFIFO_INIT(priv, fifo, channel) \ + __USBHS_DFIFO_INIT(priv, fifo, channel, D##channel##FIFO) +#define USBHS_DFIFO_INIT_NO_PORT(priv, fifo, channel) \ + __USBHS_DFIFO_INIT(priv, fifo, channel, 0) + int usbhs_fifo_probe(struct usbhs_priv *priv) { struct usbhs_fifo *fifo; @@ -1217,31 +1231,20 @@ int usbhs_fifo_probe(struct usbhs_priv *priv) fifo->sel = CFIFOSEL; fifo->ctr = CFIFOCTR; - /* D0FIFO */ - fifo = usbhsf_get_d0fifo(priv); - fifo->name = "D0FIFO"; - fifo->port = D0FIFO; - fifo->sel = D0FIFOSEL; - fifo->ctr = D0FIFOCTR; - fifo->tx_slave.shdma_slave.slave_id = usbhs_get_dparam(priv, d0_tx_id); - fifo->rx_slave.shdma_slave.slave_id = usbhs_get_dparam(priv, d0_rx_id); - usbhsf_dma_init(priv, fifo); - - /* D1FIFO */ - fifo = usbhsf_get_d1fifo(priv); - fifo->name = "D1FIFO"; - fifo->port = D1FIFO; - fifo->sel = D1FIFOSEL; - fifo->ctr = D1FIFOCTR; - fifo->tx_slave.shdma_slave.slave_id = usbhs_get_dparam(priv, d1_tx_id); - fifo->rx_slave.shdma_slave.slave_id = usbhs_get_dparam(priv, d1_rx_id); - usbhsf_dma_init(priv, fifo); + /* DFIFO */ + USBHS_DFIFO_INIT(priv, fifo, 0); + USBHS_DFIFO_INIT(priv, fifo, 1); + USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 2); + USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 3); return 0; } void usbhs_fifo_remove(struct usbhs_priv *priv) { - usbhsf_dma_quit(priv, usbhsf_get_d0fifo(priv)); - usbhsf_dma_quit(priv, usbhsf_get_d1fifo(priv)); + struct usbhs_fifo *fifo; + int i; + + usbhs_for_each_dfifo(priv, fifo, i) + usbhsf_dma_quit(priv, fifo); } diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index a168a17..f07037c1 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -38,11 +38,16 @@ struct usbhs_fifo { struct sh_dmae_slave rx_slave; }; +#define USBHS_MAX_NUM_DFIFO 4 struct usbhs_fifo_info { struct usbhs_fifo cfifo; - struct usbhs_fifo d0fifo; - struct usbhs_fifo d1fifo; + struct usbhs_fifo dfifo[USBHS_MAX_NUM_DFIFO]; }; +#define usbhsf_get_dnfifo(p, n) (&((p)->fifo_info.dfifo[n])) +#define usbhs_for_each_dfifo(priv, dfifo, i) \ + for ((i) = 0, dfifo = usbhsf_get_dnfifo(priv, (i)); \ + ((i) < USBHS_MAX_NUM_DFIFO); \ + (i)++, dfifo = usbhsf_get_dnfifo(priv, (i))) struct usbhs_pkt_handle; struct usbhs_pkt { @@ -74,6 +79,7 @@ int usbhs_fifo_probe(struct usbhs_priv *priv); void usbhs_fifo_remove(struct usbhs_priv *priv); void usbhs_fifo_init(struct usbhs_priv *priv); void usbhs_fifo_quit(struct usbhs_priv *priv); +void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe); /* * packet info diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 2d17c10..8697e6e 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -56,6 +56,7 @@ struct usbhsg_gpriv { #define USBHSG_STATUS_REGISTERD (1 << 1) #define USBHSG_STATUS_WEDGE (1 << 2) #define USBHSG_STATUS_SELF_POWERED (1 << 3) +#define USBHSG_STATUS_SOFT_CONNECT (1 << 4) }; struct usbhsg_recip_handle { @@ -484,6 +485,9 @@ static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv, case NODATA_STATUS_STAGE: pipe->handler = &usbhs_ctrl_stage_end_handler; break; + case READ_STATUS_STAGE: + case WRITE_STATUS_STAGE: + usbhs_dcp_control_transfer_done(pipe); default: return ret; } @@ -602,6 +606,9 @@ static int usbhsg_ep_disable(struct usb_ep *ep) struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); + if (!pipe) + return -EINVAL; + usbhsg_pipe_disable(uep); usbhs_pipe_free(pipe); @@ -723,6 +730,25 @@ static struct usb_ep_ops usbhsg_ep_ops = { }; /* + * pullup control + */ +static int usbhsg_can_pullup(struct usbhs_priv *priv) +{ + struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + + return gpriv->driver && + usbhsg_status_has(gpriv, USBHSG_STATUS_SOFT_CONNECT); +} + +static void usbhsg_update_pullup(struct usbhs_priv *priv) +{ + if (usbhsg_can_pullup(priv)) + usbhs_sys_function_pullup(priv, 1); + else + usbhs_sys_function_pullup(priv, 0); +} + +/* * usb module start/end */ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) @@ -756,9 +782,9 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) /* * pipe initialize and enable DCP */ + usbhs_fifo_init(priv); usbhs_pipe_init(priv, usbhsg_dma_map_ctrl); - usbhs_fifo_init(priv); /* dcp init instead of usbhsg_ep_enable() */ dcp->pipe = usbhs_dcp_malloc(priv); @@ -772,6 +798,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) * - usb module */ usbhs_sys_function_ctrl(priv, 1); + usbhsg_update_pullup(priv); /* * enable irq callback @@ -851,8 +878,7 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); } -static int usbhsg_gadget_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) +static int usbhsg_gadget_stop(struct usb_gadget *gadget) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); @@ -878,8 +904,15 @@ static int usbhsg_pullup(struct usb_gadget *gadget, int is_on) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); + unsigned long flags; - usbhs_sys_function_pullup(priv, is_on); + usbhs_lock(priv, flags); + if (is_on) + usbhsg_status_set(gpriv, USBHSG_STATUS_SOFT_CONNECT); + else + usbhsg_status_clr(gpriv, USBHSG_STATUS_SOFT_CONNECT); + usbhsg_update_pullup(priv); + usbhs_unlock(priv, flags); return 0; } diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 10e1ded..f0d3231 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1474,9 +1474,9 @@ static int usbhsh_start(struct usbhs_priv *priv) /* * pipe initialize and enable DCP */ + usbhs_fifo_init(priv); usbhs_pipe_init(priv, usbhsh_dma_map_ctrl); - usbhs_fifo_init(priv); usbhsh_pipe_init_for_host(priv); /* diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index 040bcef..007f45a 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -618,8 +618,12 @@ void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence) void usbhs_pipe_clear(struct usbhs_pipe *pipe) { - usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); - usbhsp_pipectrl_set(pipe, ACLRM, 0); + if (usbhs_pipe_is_dcp(pipe)) { + usbhs_fifo_clear_dcp(pipe); + } else { + usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); + usbhsp_pipectrl_set(pipe, ACLRM, 0); + } } static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c index e6b9dcc..8fc15c0 100644 --- a/drivers/usb/renesas_usbhs/rcar2.c +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -12,6 +12,7 @@ #include <linux/gpio.h> #include <linux/of_gpio.h> +#include <linux/phy/phy.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/usb/phy.h> #include "common.h" @@ -20,25 +21,43 @@ static int usbhs_rcar2_hardware_init(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - struct usb_phy *phy; - phy = usb_get_phy_dev(&pdev->dev, 0); - if (IS_ERR(phy)) - return PTR_ERR(phy); + if (IS_ENABLED(CONFIG_GENERIC_PHY)) { + struct phy *phy = phy_get(&pdev->dev, "usb"); - priv->phy = phy; - return 0; + if (IS_ERR(phy)) + return PTR_ERR(phy); + + priv->phy = phy; + return 0; + } + + if (IS_ENABLED(CONFIG_USB_PHY)) { + struct usb_phy *usb_phy = usb_get_phy_dev(&pdev->dev, 0); + + if (IS_ERR(usb_phy)) + return PTR_ERR(usb_phy); + + priv->usb_phy = usb_phy; + return 0; + } + + return -ENXIO; } static int usbhs_rcar2_hardware_exit(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - if (!priv->phy) - return 0; + if (priv->phy) { + phy_put(priv->phy); + priv->phy = NULL; + } - usb_put_phy(priv->phy); - priv->phy = NULL; + if (priv->usb_phy) { + usb_put_phy(priv->usb_phy); + priv->usb_phy = NULL; + } return 0; } @@ -47,21 +66,35 @@ static int usbhs_rcar2_power_ctrl(struct platform_device *pdev, void __iomem *base, int enable) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + int retval = -ENODEV; + + if (priv->phy) { + if (enable) { + retval = phy_init(priv->phy); - if (!priv->phy) - return -ENODEV; + if (!retval) + retval = phy_power_on(priv->phy); + } else { + phy_power_off(priv->phy); + phy_exit(priv->phy); + retval = 0; + } + } - if (enable) { - int retval = usb_phy_init(priv->phy); + if (priv->usb_phy) { + if (enable) { + retval = usb_phy_init(priv->usb_phy); - if (!retval) - retval = usb_phy_set_suspend(priv->phy, 0); - return retval; + if (!retval) + retval = usb_phy_set_suspend(priv->usb_phy, 0); + } else { + usb_phy_set_suspend(priv->usb_phy, 1); + usb_phy_shutdown(priv->usb_phy); + retval = 0; + } } - usb_phy_set_suspend(priv->phy, 1); - usb_phy_shutdown(priv->phy); - return 0; + return retval; } static int usbhs_rcar2_get_id(struct platform_device *pdev) |